From: Michael McMaster Date: Fri, 5 Dec 2014 03:17:06 +0000 (+1000) Subject: Emulation of multiple SCSI targets now working. X-Git-Tag: v4.00.00^2~1 X-Git-Url: http://git.codesrc.com/gitweb.cgi?a=commitdiff_plain;h=refs%2Fheads%2Fscsi2sd-util;p=SCSI2SD.git Emulation of multiple SCSI targets now working. The CDROM device support has a few bugs, as does scsi2sd-util --- diff --git a/CHANGELOG b/CHANGELOG index 642d483..a2a5308 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -1,10 +1,18 @@ -201408XX 3.6 +201412XX 3.6 - Fix handling requests for LUNs other than 0 from SCSI-2 hosts. - Handle glitches of the scsi signals to improve stability and operate with multiple devices on the SCSI bus. - Re-add parity checking. This can be disabled using scsi2sd-config if required. - Added disconnect/reconnect support during SD card writes. + - Preliminary CDROM device support (incomplete) + - New configuration method. Data is now stored in flash to allow room for + custom VPD tables. The old eeprom configuration is ignored. + - Support for up to 4 SCSI targets. + - scsi2sd-config and bootloader hosts utilities are replaced by the + new scsi2sd-util GUI. + - Fix for SD cards with Samsung controllers which expect a "stop" bit + in each SD command over SPI. 20140718 3.5.2 - Fix blank SCSI ID in scsi2sd-config output. diff --git a/software/SCSI2SD/src/cdrom.c b/software/SCSI2SD/src/cdrom.c new file mode 100755 index 0000000..6a30938 --- /dev/null +++ b/software/SCSI2SD/src/cdrom.c @@ -0,0 +1,142 @@ +// Copyright (C) 2014 Michael McMaster +// +// This file is part of SCSI2SD. +// +// SCSI2SD is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// SCSI2SD is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with SCSI2SD. If not, see . + +#include "device.h" +#include "scsi.h" +#include "config.h" +#include "cdrom.h" + +uint8_t SimpleTOC[] = +{ + 0x00, // toc length, MSB + 0x0A, // toc length, LSB + 0x01, // First track number + 0x01, // Last track number, + // TRACK 1 Descriptor + 0x00, // reservied + 0x06, // Q sub-channel not supplied, Digital track + 0x01, // Track 1, + 0x00, // Reserved + 0x00,0x00,0x00,0x00 // Track start sector (LBA) +}; + +void doReadTOC(int MSF, uint8_t track, uint16_t allocationLength) +{ + // We only support track 1. + // track 0 means "return all tracks" + if (track > 1) + { + scsiDev.status = CHECK_CONDITION; + scsiDev.target->sense.code = ILLEGAL_REQUEST; + scsiDev.target->sense.asc = INVALID_FIELD_IN_CDB; + scsiDev.phase = STATUS; + } + else if (MSF) + { + // MSF addressing not currently supported. + scsiDev.status = CHECK_CONDITION; + scsiDev.target->sense.code = ILLEGAL_REQUEST; + scsiDev.target->sense.asc = INVALID_FIELD_IN_CDB; + scsiDev.phase = STATUS; + } + else + { + uint32_t len = sizeof(SimpleTOC); + memcpy(scsiDev.data, SimpleTOC, len); + if (len > allocationLength) + { + len = allocationLength; + } + scsiDev.dataLen = len; + scsiDev.phase = DATA_IN; + } +} + +uint8_t SimpleHeader[] = +{ + 0x01, // 2048byte user data, L-EC in 288 byte aux field. + 0x00, // reserved + 0x00, // reserved + 0x00, // reserved + 0x00,0x00,0x00,0x00 // Track start sector (LBA) +}; + +void doReadHeader(int MSF, uint32_t lba, uint16_t allocationLength) +{ + if (MSF) + { + // MSF addressing not currently supported. + scsiDev.status = CHECK_CONDITION; + scsiDev.target->sense.code = ILLEGAL_REQUEST; + scsiDev.target->sense.asc = INVALID_FIELD_IN_CDB; + scsiDev.phase = STATUS; + } + else + { + uint32_t len = sizeof(SimpleHeader); + memcpy(scsiDev.data, SimpleHeader, len); + if (len > allocationLength) + { + len = allocationLength; + } + scsiDev.dataLen = len; + scsiDev.phase = DATA_IN; + } +} + + +// Handle direct-access scsi device commands +int scsiCDRomCommand() +{ + int commandHandled = 1; + + uint8 command = scsiDev.cdb[0]; + if (scsiDev.target->cfg->deviceType == CONFIG_OPTICAL) + { + if (command == 0x43) + { + // CD-ROM Read TOC + int MSF = scsiDev.cdb[1] & 0x02 ? 1 : 0; + uint8_t track = scsiDev.cdb[6]; + uint16_t allocationLength = + (((uint32_t) scsiDev.cdb[7]) << 8) + + scsiDev.cdb[8]; + + doReadTOC(MSF, track, allocationLength); + } + else if (command == 0x44) + { + // CD-ROM Read Header + int MSF = scsiDev.cdb[1] & 0x02 ? 1 : 0; + uint32_t lba = 0; // IGNORED for now + uint16_t allocationLength = + (((uint32_t) scsiDev.cdb[7]) << 8) + + scsiDev.cdb[8]; + doReadHeader(MSF, lba, allocationLength); + } + else + { + commandHandled = 0; + } + } + else + { + commandHandled = 0; + } + + return commandHandled; +} diff --git a/software/SCSI2SD/src/cdrom.h b/software/SCSI2SD/src/cdrom.h new file mode 100755 index 0000000..f61e328 --- /dev/null +++ b/software/SCSI2SD/src/cdrom.h @@ -0,0 +1,22 @@ +// Copyright (C) 2014 Michael McMaster +// +// This file is part of SCSI2SD. +// +// SCSI2SD is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// SCSI2SD is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with SCSI2SD. If not, see . +#ifndef CDROM_H +#define CDROM_H + +int scsiCDRomCommand(void); + +#endif diff --git a/software/SCSI2SD/src/config.c b/software/SCSI2SD/src/config.c index 93c0be6..fb0473a 100755 --- a/software/SCSI2SD/src/config.c +++ b/software/SCSI2SD/src/config.c @@ -29,25 +29,8 @@ #include -// CYDEV_EEPROM_ROW_SIZE == 16. -static const char magic[CYDEV_EEPROM_ROW_SIZE] = "codesrc_00000002"; static const uint16_t FIRMWARE_VERSION = 0x0360; -// Config shadow RAM (copy of EEPROM) -static Config shadow = -{ - 0, // SCSI ID - " codesrc", // vendor (68k Apple Drive Setup: Set to " SEAGATE") - " SCSI2SD", //prodId (68k Apple Drive Setup: Set to " ST225N") - " 3.6", // revision (68k Apple Drive Setup: Set to "1.0 ") - 1, // enable parity - 1, // enable unit attention, - 0, // RESERVED - 0, // Max sectors (0 == disabled) - 512 // Sector size - // reserved bytes will be initialised to 0. -}; - enum USB_ENDPOINTS { USB_EP_OUT = 1, @@ -67,92 +50,8 @@ static int usbInEpState; static int usbDebugEpState; static int usbReady; -// Global -Config* config = NULL; - -// The PSoC 5LP compile to little-endian format. -static uint32_t ntohl(uint32_t val) -{ - return - ((val & 0xFF) << 24) | - ((val & 0xFF00) << 8) | - ((val >> 8) & 0xFF00) | - ((val >> 24) & 0xFF); -} -static uint16_t ntohs(uint16_t val) -{ - return - ((val & 0xFF) << 8) | - ((val >> 8) & 0xFF); -} -static uint32_t htonl(uint32_t val) -{ - return - ((val & 0xFF) << 24) | - ((val & 0xFF00) << 8) | - ((val >> 8) & 0xFF00) | - ((val >> 24) & 0xFF); -} -static uint16_t htons(uint16_t val) -{ - return - ((val & 0xFF) << 8) | - ((val >> 8) & 0xFF); -} - -static void saveConfig() -{ - int shadowRows = (sizeof(shadow) / CYDEV_EEPROM_ROW_SIZE) + 1; - int row; - int status = CYRET_SUCCESS; - - CySetTemp(); - for (row = 0; (row < shadowRows) && (status == CYRET_SUCCESS); ++row) - { - CFG_EEPROM_Write(((uint8*)&shadow) + (row * CYDEV_EEPROM_ROW_SIZE), row); - } - if (status == CYRET_SUCCESS) - { - CFG_EEPROM_Write((uint8*)magic, row); - } -} - void configInit() { - int shadowRows, shadowBytes; - uint8* eeprom = (uint8*)CYDEV_EE_BASE; - - // We could map cfgPtr directly into the EEPROM memory, - // but that would waste power. Copy it to RAM then turn off - // the EEPROM. - CFG_EEPROM_Start(); - CyDelayUs(5); // 5us to start per datasheet. - - // Check magic - shadowRows = (sizeof(shadow) / CYDEV_EEPROM_ROW_SIZE) + 1; - shadowBytes = CYDEV_EEPROM_ROW_SIZE * shadowRows; - - if (memcmp(eeprom + shadowBytes, magic, sizeof(magic))) - { - // Initial state, invalid, or upgrade required. - if (!memcmp(eeprom + shadowBytes, magic, sizeof(magic) - 1) && - ((eeprom + shadowBytes)[sizeof(magic) - 2] == '1')) - { - // Upgrade from version 1. - memcpy(&shadow, eeprom, sizeof(shadow)); - shadow.bytesPerSector = 512; - } - - saveConfig(); - } - else - { - memcpy(&shadow, eeprom, sizeof(shadow)); - } - - config = &shadow; - CFG_EEPROM_Stop(); - // The USB block will be powered by an internal 3.3V regulator. // The PSoC must be operating between 4.6V and 5V for the regulator // to work. @@ -353,10 +252,10 @@ void debugPoll() hidBuffer[14] = scsiDev.lastStatus; hidBuffer[15] = scsiDev.lastSense; hidBuffer[16] = scsiDev.phase; - hidBuffer[17] = SCSI_ReadPin(SCSI_In_BSY); - hidBuffer[18] = SCSI_ReadPin(SCSI_In_SEL); - hidBuffer[19] = SCSI_ReadPin(SCSI_ATN_INT); - hidBuffer[20] = SCSI_ReadPin(SCSI_RST_INT); + hidBuffer[17] = SCSI_ReadFilt(SCSI_Filt_BSY); + hidBuffer[18] = SCSI_ReadFilt(SCSI_Filt_SEL); + hidBuffer[19] = SCSI_ReadFilt(SCSI_Filt_ATN); + hidBuffer[20] = SCSI_ReadFilt(SCSI_Filt_RST); hidBuffer[21] = scsiDev.rstCount; hidBuffer[22] = scsiDev.selCount; hidBuffer[23] = scsiDev.msgCount; @@ -403,8 +302,37 @@ void debugInit() // Public method for storing MODE SELECT results. void configSave() { - CFG_EEPROM_Start(); - saveConfig(); // write to eeprom - CFG_EEPROM_Stop(); +// TODO REIMPLEMENT +// CFG_EEPROM_Start(); +// saveConfig(); // write to eeprom +// CFG_EEPROM_Stop(); } + +const TargetConfig* getConfigByIndex(int i) +{ + size_t row = SCSI_CONFIG_0_ROW + (i * SCSI_CONFIG_ROWS); + return (const TargetConfig*) + ( + CY_FLASH_BASE + + (CY_FLASH_SIZEOF_ARRAY * (size_t) SCSI_CONFIG_ARRAY) + + (CY_FLASH_SIZEOF_ROW * row) + ); +} + +const TargetConfig* getConfigById(int scsiId) +{ + int i; + for (i = 0; i < MAX_SCSI_TARGETS; ++i) + { + const TargetConfig* tgt = getConfigByIndex(i); + if ((tgt->scsiId & CONFIG_TARGET_ID_BITS) == scsiId) + { + return tgt; + } + } + return NULL; + +} + + diff --git a/software/SCSI2SD/src/config.h b/software/SCSI2SD/src/config.h index c95474f..bce06e7 100755 --- a/software/SCSI2SD/src/config.h +++ b/software/SCSI2SD/src/config.h @@ -18,28 +18,14 @@ #define Config_H #include "device.h" - -typedef struct -{ - uint8 scsiId; - char vendor[8]; - char prodId[16]; - char revision[4]; - uint8 enableParity; - uint8 enableUnitAttention; - uint8 reserved1; // Unused. Ensures maxBlocks is aligned. - uint32 maxSectors; - uint16 bytesPerSector; - - // Pad to 64 bytes, which is what we can fit into a USB HID packet. - char reserved[26]; -} Config; - -extern Config* config; +#include "scsi2sd.h" void configInit(void); void debugInit(void); void configPoll(void); void configSave(void); +const TargetConfig* getConfigByIndex(int index); +const TargetConfig* getConfigById(int scsiId); + #endif diff --git a/software/SCSI2SD/src/diagnostic.c b/software/SCSI2SD/src/diagnostic.c index 45f5a0b..15e624f 100755 --- a/software/SCSI2SD/src/diagnostic.c +++ b/software/SCSI2SD/src/diagnostic.c @@ -51,8 +51,8 @@ void scsiSendDiagnostic() // Nowhere to store this data! // Shouldn't happen - our buffer should be many magnitudes larger // than the required size for diagnostic parameters. - scsiDev.sense.code = ILLEGAL_REQUEST; - scsiDev.sense.asc = INVALID_FIELD_IN_CDB; + scsiDev.target->sense.code = ILLEGAL_REQUEST; + scsiDev.target->sense.asc = INVALID_FIELD_IN_CDB; scsiDev.status = CHECK_CONDITION; scsiDev.phase = STATUS; } @@ -95,9 +95,10 @@ void scsiReceiveDiagnostic() // Convert each supplied address back to a simple // 64bit linear address, then convert back again. uint64 fromByteAddr = - scsiByteAddress(suppliedFmt, &scsiDev.data[6]); + scsiByteAddress(scsiDev.target->cfg, suppliedFmt, &scsiDev.data[6]); - scsiSaveByteAddress(translateFmt, fromByteAddr, &scsiDev.data[6]); + scsiSaveByteAddress( + scsiDev.target->cfg, translateFmt, fromByteAddr, &scsiDev.data[6]); // Fill out the rest of the response. // (Clear out any optional bits). @@ -111,8 +112,8 @@ void scsiReceiveDiagnostic() { // error. scsiDev.status = CHECK_CONDITION; - scsiDev.sense.code = ILLEGAL_REQUEST; - scsiDev.sense.asc = INVALID_FIELD_IN_CDB; + scsiDev.target->sense.code = ILLEGAL_REQUEST; + scsiDev.target->sense.asc = INVALID_FIELD_IN_CDB; scsiDev.phase = STATUS; } diff --git a/software/SCSI2SD/src/disk.c b/software/SCSI2SD/src/disk.c index 965cee4..adafdf4 100755 --- a/software/SCSI2SD/src/disk.c +++ b/software/SCSI2SD/src/disk.c @@ -113,7 +113,7 @@ static void doReadCapacity() scsiDev.cdb[5]; int pmi = scsiDev.cdb[8] & 1; - uint32_t capacity = getScsiCapacity(); + uint32_t capacity = getScsiCapacity(scsiDev.target->cfg); if (!pmi && lba) { @@ -122,8 +122,8 @@ static void doReadCapacity() // assume that delays are constant across each block. But the spec // says we must return this error if pmi is specified incorrectly. scsiDev.status = CHECK_CONDITION; - scsiDev.sense.code = ILLEGAL_REQUEST; - scsiDev.sense.asc = INVALID_FIELD_IN_CDB; + scsiDev.target->sense.code = ILLEGAL_REQUEST; + scsiDev.target->sense.asc = INVALID_FIELD_IN_CDB; scsiDev.phase = STATUS; } else if (capacity > 0) @@ -135,18 +135,19 @@ static void doReadCapacity() scsiDev.data[2] = highestBlock >> 8; scsiDev.data[3] = highestBlock; - scsiDev.data[4] = config->bytesPerSector >> 24; - scsiDev.data[5] = config->bytesPerSector >> 16; - scsiDev.data[6] = config->bytesPerSector >> 8; - scsiDev.data[7] = config->bytesPerSector; + uint32_t bytesPerSector = scsiDev.target->cfg->bytesPerSector; + scsiDev.data[4] = bytesPerSector >> 24; + scsiDev.data[5] = bytesPerSector >> 16; + scsiDev.data[6] = bytesPerSector >> 8; + scsiDev.data[7] = bytesPerSector; scsiDev.dataLen = 8; scsiDev.phase = DATA_IN; } else { scsiDev.status = CHECK_CONDITION; - scsiDev.sense.code = NOT_READY; - scsiDev.sense.asc = MEDIUM_NOT_PRESENT; + scsiDev.target->sense.code = NOT_READY; + scsiDev.target->sense.asc = MEDIUM_NOT_PRESENT; scsiDev.phase = STATUS; } } @@ -156,15 +157,15 @@ static void doWrite(uint32 lba, uint32 blocks) if (blockDev.state & DISK_WP) { scsiDev.status = CHECK_CONDITION; - scsiDev.sense.code = ILLEGAL_REQUEST; - scsiDev.sense.asc = WRITE_PROTECTED; + scsiDev.target->sense.code = ILLEGAL_REQUEST; + scsiDev.target->sense.asc = WRITE_PROTECTED; scsiDev.phase = STATUS; } - else if (((uint64) lba) + blocks > getScsiCapacity()) + else if (((uint64) lba) + blocks > getScsiCapacity(scsiDev.target->cfg)) { scsiDev.status = CHECK_CONDITION; - scsiDev.sense.code = ILLEGAL_REQUEST; - scsiDev.sense.asc = LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; + scsiDev.target->sense.code = ILLEGAL_REQUEST; + scsiDev.target->sense.asc = LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; scsiDev.phase = STATUS; } else @@ -174,8 +175,8 @@ static void doWrite(uint32 lba, uint32 blocks) transfer.blocks = blocks; transfer.currentBlock = 0; scsiDev.phase = DATA_OUT; - scsiDev.dataLen = config->bytesPerSector; - scsiDev.dataPtr = config->bytesPerSector; // TODO FIX scsiDiskPoll() + scsiDev.dataLen = scsiDev.target->cfg->bytesPerSector; + scsiDev.dataPtr = scsiDev.target->cfg->bytesPerSector; // No need for single-block writes atm. Overhead of the // multi-block write is minimal. @@ -188,12 +189,12 @@ static void doWrite(uint32 lba, uint32 blocks) static void doRead(uint32 lba, uint32 blocks) { - uint32_t capacity = getScsiCapacity(); + uint32_t capacity = getScsiCapacity(scsiDev.target->cfg); if (((uint64) lba) + blocks > capacity) { scsiDev.status = CHECK_CONDITION; - scsiDev.sense.code = ILLEGAL_REQUEST; - scsiDev.sense.asc = LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; + scsiDev.target->sense.code = ILLEGAL_REQUEST; + scsiDev.target->sense.asc = LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; scsiDev.phase = STATUS; } else @@ -223,11 +224,11 @@ static void doRead(uint32 lba, uint32 blocks) static void doSeek(uint32 lba) { - if (lba >= getScsiCapacity()) + if (lba >= getScsiCapacity(scsiDev.target->cfg)) { scsiDev.status = CHECK_CONDITION; - scsiDev.sense.code = ILLEGAL_REQUEST; - scsiDev.sense.asc = LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; + scsiDev.target->sense.code = ILLEGAL_REQUEST; + scsiDev.target->sense.asc = LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; scsiDev.phase = STATUS; } } @@ -239,24 +240,24 @@ static int doTestUnitReady() { ready = 0; scsiDev.status = CHECK_CONDITION; - scsiDev.sense.code = NOT_READY; - scsiDev.sense.asc = LOGICAL_UNIT_NOT_READY_INITIALIZING_COMMAND_REQUIRED; + scsiDev.target->sense.code = NOT_READY; + scsiDev.target->sense.asc = LOGICAL_UNIT_NOT_READY_INITIALIZING_COMMAND_REQUIRED; scsiDev.phase = STATUS; } else if (!(blockDev.state & DISK_PRESENT)) { ready = 0; scsiDev.status = CHECK_CONDITION; - scsiDev.sense.code = NOT_READY; - scsiDev.sense.asc = MEDIUM_NOT_PRESENT; + scsiDev.target->sense.code = NOT_READY; + scsiDev.target->sense.asc = MEDIUM_NOT_PRESENT; scsiDev.phase = STATUS; } else if (!(blockDev.state & DISK_INITIALISED)) { ready = 0; scsiDev.status = CHECK_CONDITION; - scsiDev.sense.code = NOT_READY; - scsiDev.sense.asc = LOGICAL_UNIT_NOT_READY_CAUSE_NOT_REPORTABLE; + scsiDev.target->sense.code = NOT_READY; + scsiDev.target->sense.asc = LOGICAL_UNIT_NOT_READY_CAUSE_NOT_REPORTABLE; scsiDev.phase = STATUS; } return ready; @@ -444,8 +445,8 @@ int scsiDiskCommand() // TODO. This means they are supplying data to verify against. // Technically we should probably grab the data and compare it. scsiDev.status = CHECK_CONDITION; - scsiDev.sense.code = ILLEGAL_REQUEST; - scsiDev.sense.asc = INVALID_FIELD_IN_CDB; + scsiDev.target->sense.code = ILLEGAL_REQUEST; + scsiDev.target->sense.asc = INVALID_FIELD_IN_CDB; scsiDev.phase = STATUS; } } @@ -464,8 +465,9 @@ void scsiDiskPoll() { scsiEnterPhase(DATA_IN); - int totalSDSectors = transfer.blocks * SDSectorsPerSCSISector(); - uint32_t sdLBA = SCSISector2SD(transfer.lba); + int totalSDSectors = + transfer.blocks * SDSectorsPerSCSISector(scsiDev.target->cfg); + uint32_t sdLBA = SCSISector2SD(scsiDev.target->cfg, transfer.lba); int buffers = sizeof(scsiDev.data) / SD_SECTOR_SIZE; int prep = 0; int i = 0; @@ -502,9 +504,10 @@ void scsiDiskPoll() else if ((scsiActive == 0) && ((prep - i) > 0)) { int dmaBytes = SD_SECTOR_SIZE; - if (i % SDSectorsPerSCSISector() == SDSectorsPerSCSISector() - 1) + if ((i % SDSectorsPerSCSISector(scsiDev.target->cfg)) == + (SDSectorsPerSCSISector(scsiDev.target->cfg) - 1)) { - dmaBytes = config->bytesPerSector % SD_SECTOR_SIZE; + dmaBytes = scsiDev.target->cfg->bytesPerSector % SD_SECTOR_SIZE; if (dmaBytes == 0) dmaBytes = SD_SECTOR_SIZE; } scsiWriteDMA(&scsiDev.data[SD_SECTOR_SIZE * (i % buffers)], dmaBytes); @@ -522,7 +525,8 @@ void scsiDiskPoll() { scsiEnterPhase(DATA_OUT); - int totalSDSectors = transfer.blocks * SDSectorsPerSCSISector(); + int totalSDSectors = + transfer.blocks * SDSectorsPerSCSISector(scsiDev.target->cfg); int buffers = sizeof(scsiDev.data) / SD_SECTOR_SIZE; int prep = 0; int i = 0; @@ -559,9 +563,10 @@ void scsiDiskPoll() !scsiDisconnected) { int dmaBytes = SD_SECTOR_SIZE; - if (prep % SDSectorsPerSCSISector() == SDSectorsPerSCSISector() - 1) + if ((prep % SDSectorsPerSCSISector(scsiDev.target->cfg)) == + (SDSectorsPerSCSISector(scsiDev.target->cfg) - 1)) { - dmaBytes = config->bytesPerSector % SD_SECTOR_SIZE; + dmaBytes = scsiDev.target->cfg->bytesPerSector % SD_SECTOR_SIZE; if (dmaBytes == 0) dmaBytes = SD_SECTOR_SIZE; } scsiReadDMA(&scsiDev.data[SD_SECTOR_SIZE * (prep % buffers)], dmaBytes); @@ -622,10 +627,12 @@ void scsiDiskPoll() if (scsiDev.phase == DATA_OUT) { - if (scsiDev.parityError && config->enableParity && !scsiDev.compatMode) + if (scsiDev.parityError && + (scsiDev.target->cfg->flags & CONFIG_ENABLE_PARITY) && + !scsiDev.compatMode) { - scsiDev.sense.code = ABORTED_COMMAND; - scsiDev.sense.asc = SCSI_PARITY_ERROR; + scsiDev.target->sense.code = ABORTED_COMMAND; + scsiDev.target->sense.asc = SCSI_PARITY_ERROR; scsiDev.status = CHECK_CONDITION;; } scsiDev.phase = STATUS; diff --git a/software/SCSI2SD/src/geometry.c b/software/SCSI2SD/src/geometry.c index 01478e3..d746d33 100755 --- a/software/SCSI2SD/src/geometry.c +++ b/software/SCSI2SD/src/geometry.c @@ -20,20 +20,22 @@ #include -uint32_t getScsiCapacity() +uint32_t getScsiCapacity(const TargetConfig* config) { - uint32_t capacity = sdDev.capacity / SDSectorsPerSCSISector(); - if (config->maxSectors && (capacity > config->maxSectors)) + uint32_t capacity = + (sdDev.capacity - config->sdSectorStart) / + SDSectorsPerSCSISector(config); + if (config->scsiSectors && (capacity > config->scsiSectors)) { - capacity = config->maxSectors; + capacity = config->scsiSectors; } return capacity; } -uint32_t SCSISector2SD(uint32_t scsiSector) +uint32_t SCSISector2SD(const TargetConfig* config, uint32_t scsiSector) { - return scsiSector * SDSectorsPerSCSISector(); + return scsiSector * SDSectorsPerSCSISector(config) + config->sdSectorStart; } // Standard mapping according to ECMA-107 and ISO/IEC 9293:1994 @@ -54,7 +56,7 @@ void LBA2CHS(uint32 lba, uint32* c, uint8* h, uint32* s) *s = (lba % SCSI_SECTORS_PER_TRACK) + 1; } -uint64 scsiByteAddress(int format, const uint8* addr) +uint64 scsiByteAddress(const TargetConfig* config, int format, const uint8* addr) { uint64 result; switch (format) @@ -114,7 +116,7 @@ uint64 scsiByteAddress(int format, const uint8* addr) } -void scsiSaveByteAddress(int format, uint64 byteAddr, uint8* buf) +void scsiSaveByteAddress(const TargetConfig* config, int format, uint64 byteAddr, uint8* buf) { uint32 lba = byteAddr / config->bytesPerSector; uint32 byteOffset = byteAddr % config->bytesPerSector; diff --git a/software/SCSI2SD/src/geometry.h b/software/SCSI2SD/src/geometry.h index c965870..b20ab60 100755 --- a/software/SCSI2SD/src/geometry.h +++ b/software/SCSI2SD/src/geometry.h @@ -35,14 +35,14 @@ typedef enum ADDRESS_PHYSICAL_SECTOR = 5 } SCSI_ADDRESS_FORMAT; -static inline int SDSectorsPerSCSISector() +static inline int SDSectorsPerSCSISector(const TargetConfig* config) { return (config->bytesPerSector + SD_SECTOR_SIZE - 1) / SD_SECTOR_SIZE; } -uint32_t getScsiCapacity(); +uint32_t getScsiCapacity(const TargetConfig* config); -uint32_t SCSISector2SD(uint32_t scsiSector); +uint32_t SCSISector2SD(const TargetConfig* config, uint32_t scsiSector); uint64 CHS2LBA(uint32 c, uint8 h, uint32 s); void LBA2CHS(uint32 lba, uint32* c, uint8* h, uint32* s); @@ -50,8 +50,10 @@ void LBA2CHS(uint32 lba, uint32* c, uint8* h, uint32* s); // Convert an address in the given SCSI_ADDRESS_FORMAT to // a linear byte address. // addr must be >= 8 bytes. -uint64 scsiByteAddress(int format, const uint8* addr); -void scsiSaveByteAddress(int format, uint64 byteAddr, uint8* buf); +uint64 scsiByteAddress( + const TargetConfig* config, int format, const uint8* addr); +void scsiSaveByteAddress( + const TargetConfig* config, int format, uint64 byteAddr, uint8* buf); #endif diff --git a/software/SCSI2SD/src/inquiry.c b/software/SCSI2SD/src/inquiry.c index b90eb71..2067297 100755 --- a/software/SCSI2SD/src/inquiry.c +++ b/software/SCSI2SD/src/inquiry.c @@ -104,12 +104,13 @@ void scsiInquiry() { // error. scsiDev.status = CHECK_CONDITION; - scsiDev.sense.code = ILLEGAL_REQUEST; - scsiDev.sense.asc = INVALID_FIELD_IN_CDB; + scsiDev.target->sense.code = ILLEGAL_REQUEST; + scsiDev.target->sense.asc = INVALID_FIELD_IN_CDB; scsiDev.phase = STATUS; } else { + const TargetConfig* config = scsiDev.target->cfg; memcpy(scsiDev.data, StandardResponse, sizeof(StandardResponse)); memcpy(&scsiDev.data[8], config->vendor, sizeof(config->vendor)); memcpy(&scsiDev.data[16], config->prodId, sizeof(config->prodId)); @@ -155,8 +156,8 @@ void scsiInquiry() { // error. scsiDev.status = CHECK_CONDITION; - scsiDev.sense.code = ILLEGAL_REQUEST; - scsiDev.sense.asc = INVALID_FIELD_IN_CDB; + scsiDev.target->sense.code = ILLEGAL_REQUEST; + scsiDev.target->sense.asc = INVALID_FIELD_IN_CDB; scsiDev.phase = STATUS; } @@ -176,6 +177,21 @@ void scsiInquiry() } // Spec 8.2.5 requires us to simply truncate the response if it's too big. scsiDev.dataLen = allocationLength; + + // Set the device type as needed. + switch (scsiDev.target->cfg->deviceType) + { + case CONFIG_OPTICAL: + scsiDev.data[0] = 0x05; // device type + scsiDev.data[1] |= 0x80; // Removable bit. + break; + case CONFIG_REMOVEABLE: + scsiDev.data[1] |= 0x80; // Removable bit. + break; + default: + // Accept defaults for a fixed disk. + break; + } } // Set the first byte to indicate LUN presence. diff --git a/software/SCSI2SD/src/mode.c b/software/SCSI2SD/src/mode.c index 21ddadd..16207ec 100755 --- a/software/SCSI2SD/src/mode.c +++ b/software/SCSI2SD/src/mode.c @@ -135,8 +135,8 @@ static void doModeSense( if (pc == 0x03) // Saved Values not supported. { scsiDev.status = CHECK_CONDITION; - scsiDev.sense.code = ILLEGAL_REQUEST; - scsiDev.sense.asc = SAVING_PARAMETERS_NOT_SUPPORTED; + scsiDev.target->sense.code = ILLEGAL_REQUEST; + scsiDev.target->sense.asc = SAVING_PARAMETERS_NOT_SUPPORTED; scsiDev.phase = STATUS; } else @@ -200,9 +200,10 @@ static void doModeSense( scsiDev.data[idx++] = 0; // reserved // Block length - scsiDev.data[idx++] = config->bytesPerSector >> 16; - scsiDev.data[idx++] = config->bytesPerSector >> 8; - scsiDev.data[idx++] = config->bytesPerSector & 0xFF; + uint32_t bytesPerSector = scsiDev.target->cfg->bytesPerSector; + scsiDev.data[idx++] = bytesPerSector >> 16; + scsiDev.data[idx++] = bytesPerSector >> 8; + scsiDev.data[idx++] = bytesPerSector & 0xFF; } switch (pageCode) @@ -225,8 +226,9 @@ static void doModeSense( if (pc != 0x01) { // Fill out the configured bytes-per-sector - scsiDev.data[idx+12] = config->bytesPerSector >> 8; - scsiDev.data[idx+13] = config->bytesPerSector & 0xFF; + uint32_t bytesPerSector = scsiDev.target->cfg->bytesPerSector; + scsiDev.data[idx+12] = bytesPerSector >> 8; + scsiDev.data[idx+13] = bytesPerSector & 0xFF; } else { @@ -248,7 +250,7 @@ static void doModeSense( uint32 cyl; uint8 head; uint32 sector; - LBA2CHS(getScsiCapacity(), &cyl, &head, §or); + LBA2CHS(getScsiCapacity(scsiDev.target->cfg), &cyl, &head, §or); scsiDev.data[idx+2] = cyl >> 16; scsiDev.data[idx+3] = cyl >> 8; @@ -281,8 +283,8 @@ static void doModeSense( // Unknown Page Code pageFound = 0; scsiDev.status = CHECK_CONDITION; - scsiDev.sense.code = ILLEGAL_REQUEST; - scsiDev.sense.asc = INVALID_FIELD_IN_CDB; + scsiDev.target->sense.code = ILLEGAL_REQUEST; + scsiDev.target->sense.asc = INVALID_FIELD_IN_CDB; scsiDev.phase = STATUS; } @@ -314,8 +316,8 @@ static void doModeSense( { // Page not found scsiDev.status = CHECK_CONDITION; - scsiDev.sense.code = ILLEGAL_REQUEST; - scsiDev.sense.asc = INVALID_FIELD_IN_CDB; + scsiDev.target->sense.code = ILLEGAL_REQUEST; + scsiDev.target->sense.asc = INVALID_FIELD_IN_CDB; scsiDev.phase = STATUS; } } @@ -355,9 +357,9 @@ static void doModeSelect(void) { goto bad; } - else if (bytesPerSector != config->bytesPerSector) + else if (bytesPerSector != scsiDev.target->cfg->bytesPerSector) { - config->bytesPerSector = bytesPerSector; + // TODO REIMPLEMENT CONFIG SAVEconfig->bytesPerSector = bytesPerSector; configSave(); } } @@ -387,7 +389,7 @@ static void doModeSelect(void) goto bad; } - config->bytesPerSector = bytesPerSector; + // TODO CONFIGFAVE REIMPLEMENT config->bytesPerSector = bytesPerSector; if (scsiDev.cdb[1] & 1) // SP Save Pages flag { configSave(); @@ -406,8 +408,8 @@ static void doModeSelect(void) goto out; bad: scsiDev.status = CHECK_CONDITION; - scsiDev.sense.code = ILLEGAL_REQUEST; - scsiDev.sense.asc = INVALID_FIELD_IN_PARAMETER_LIST; + scsiDev.target->sense.code = ILLEGAL_REQUEST; + scsiDev.target->sense.asc = INVALID_FIELD_IN_PARAMETER_LIST; out: scsiDev.phase = STATUS; diff --git a/software/SCSI2SD/src/scsi.c b/software/SCSI2SD/src/scsi.c index 8d64270..061818f 100755 --- a/software/SCSI2SD/src/scsi.c +++ b/software/SCSI2SD/src/scsi.c @@ -27,6 +27,7 @@ #include "mode.h" #include "disk.h" #include "time.h" +#include "cdrom.h" #include @@ -113,7 +114,7 @@ static void enter_Status(uint8 status) scsiDev.phase = STATUS; scsiDev.lastStatus = scsiDev.status; - scsiDev.lastSense = scsiDev.sense.code; + scsiDev.lastSense = scsiDev.target->sense.code; } static void process_Status() @@ -143,7 +144,7 @@ static void process_Status() scsiWriteByte(scsiDev.status); scsiDev.lastStatus = scsiDev.status; - scsiDev.lastSense = scsiDev.sense.code; + scsiDev.lastSense = scsiDev.target->sense.code; // Command Complete occurs AFTER a valid status has been // sent. then we go bus-free. @@ -198,10 +199,12 @@ static void process_DataOut() scsiRead(scsiDev.data + scsiDev.dataPtr, len); scsiDev.dataPtr += len; - if (scsiDev.parityError && config->enableParity && !scsiDev.compatMode) + if (scsiDev.parityError && + (scsiDev.target->cfg->flags & CONFIG_ENABLE_PARITY) && + !scsiDev.compatMode) { - scsiDev.sense.code = ABORTED_COMMAND; - scsiDev.sense.asc = SCSI_PARITY_ERROR; + scsiDev.target->sense.code = ABORTED_COMMAND; + scsiDev.target->sense.asc = SCSI_PARITY_ERROR; enter_Status(CHECK_CONDITION); } } @@ -256,17 +259,19 @@ static void process_Command() memset(scsiDev.cdb, 0xff, sizeof(scsiDev.cdb)); return; } - else if (scsiDev.parityError && config->enableParity && !scsiDev.compatMode) + else if (scsiDev.parityError && + (scsiDev.target->cfg->flags & CONFIG_ENABLE_PARITY) && + !scsiDev.compatMode) { - scsiDev.sense.code = ABORTED_COMMAND; - scsiDev.sense.asc = SCSI_PARITY_ERROR; + scsiDev.target->sense.code = ABORTED_COMMAND; + scsiDev.target->sense.asc = SCSI_PARITY_ERROR; enter_Status(CHECK_CONDITION); } else if ((control & 0x02) && ((control & 0x01) == 0)) { // FLAG set without LINK flag. - scsiDev.sense.code = ILLEGAL_REQUEST; - scsiDev.sense.asc = INVALID_FIELD_IN_CDB; + scsiDev.target->sense.code = ILLEGAL_REQUEST; + scsiDev.target->sense.asc = INVALID_FIELD_IN_CDB; enter_Status(CHECK_CONDITION); } else if (command == 0x12) @@ -284,7 +289,7 @@ static void process_Command() memset(scsiDev.data, 0, 256); // Max possible alloc length scsiDev.data[0] = 0xF0; - scsiDev.data[2] = scsiDev.sense.code & 0x0F; + scsiDev.data[2] = scsiDev.target->sense.code & 0x0F; scsiDev.data[3] = transfer.lba >> 24; scsiDev.data[4] = transfer.lba >> 16; @@ -293,43 +298,44 @@ static void process_Command() // Additional bytes if there are errors to report scsiDev.data[7] = 10; // additional length - scsiDev.data[12] = scsiDev.sense.asc >> 8; - scsiDev.data[13] = scsiDev.sense.asc; + scsiDev.data[12] = scsiDev.target->sense.asc >> 8; + scsiDev.data[13] = scsiDev.target->sense.asc; // Silently truncate results. SCSI-2 spec 8.2.14. enter_DataIn(allocLength); // This is a good time to clear out old sense information. - scsiDev.sense.code = NO_SENSE; - scsiDev.sense.asc = NO_ADDITIONAL_SENSE_INFORMATION; + scsiDev.target->sense.code = NO_SENSE; + scsiDev.target->sense.asc = NO_ADDITIONAL_SENSE_INFORMATION; } // Some old SCSI drivers do NOT properly support // unitAttention. eg. the Mac Plus would trigger a SCSI reset // on receiving the unit attention response on boot, thus // triggering another unit attention condition. - else if (scsiDev.unitAttention && config->enableUnitAttention) + else if (scsiDev.target->unitAttention && + (scsiDev.target->cfg->flags & CONFIG_ENABLE_UNIT_ATTENTION)) { - scsiDev.sense.code = UNIT_ATTENTION; - scsiDev.sense.asc = scsiDev.unitAttention; + scsiDev.target->sense.code = UNIT_ATTENTION; + scsiDev.target->sense.asc = scsiDev.target->unitAttention; // If initiator doesn't do REQUEST SENSE for the next command, then // data is lost. - scsiDev.unitAttention = 0; + scsiDev.target->unitAttention = 0; enter_Status(CHECK_CONDITION); } else if (scsiDev.lun) { - scsiDev.sense.code = ILLEGAL_REQUEST; - scsiDev.sense.asc = LOGICAL_UNIT_NOT_SUPPORTED; + scsiDev.target->sense.code = ILLEGAL_REQUEST; + scsiDev.target->sense.asc = LOGICAL_UNIT_NOT_SUPPORTED; enter_Status(CHECK_CONDITION); } else if (command == 0x17 || command == 0x16) { doReserveRelease(); } - else if ((scsiDev.reservedId >= 0) && - (scsiDev.reservedId != scsiDev.initiatorId)) + else if ((scsiDev.target->reservedId >= 0) && + (scsiDev.target->reservedId != scsiDev.initiatorId)) { enter_Status(CONFLICT); } @@ -347,10 +353,11 @@ static void process_Command() } else if ( !scsiModeCommand() && - !scsiDiskCommand()) + !scsiDiskCommand() && + !scsiCDRomCommand()) { - scsiDev.sense.code = ILLEGAL_REQUEST; - scsiDev.sense.asc = INVALID_COMMAND_OPERATION_CODE; + scsiDev.target->sense.code = ILLEGAL_REQUEST; + scsiDev.target->sense.asc = INVALID_COMMAND_OPERATION_CODE; enter_Status(CHECK_CONDITION); } @@ -370,25 +377,25 @@ static void doReserveRelease() uint8 command = scsiDev.cdb[0]; int canRelease = - (!thirdPty && (scsiDev.initiatorId == scsiDev.reservedId)) || + (!thirdPty && (scsiDev.initiatorId == scsiDev.target->reservedId)) || (thirdPty && - (scsiDev.reserverId == scsiDev.initiatorId) && - (scsiDev.reservedId == thirdPtyId) + (scsiDev.target->reserverId == scsiDev.initiatorId) && + (scsiDev.target->reservedId == thirdPtyId) ); if (extentReservation) { // Not supported. - scsiDev.sense.code = ILLEGAL_REQUEST; - scsiDev.sense.asc = INVALID_FIELD_IN_CDB; + scsiDev.target->sense.code = ILLEGAL_REQUEST; + scsiDev.target->sense.asc = INVALID_FIELD_IN_CDB; enter_Status(CHECK_CONDITION); } else if (command == 0x17) // release { - if ((scsiDev.reservedId < 0) || canRelease) + if ((scsiDev.target->reservedId < 0) || canRelease) { - scsiDev.reservedId = -1; - scsiDev.reserverId = -1; + scsiDev.target->reservedId = -1; + scsiDev.target->reserverId = -1; } else { @@ -397,16 +404,16 @@ static void doReserveRelease() } else // assume reserve. { - if ((scsiDev.reservedId < 0) || canRelease) + if ((scsiDev.target->reservedId < 0) || canRelease) { - scsiDev.reserverId = scsiDev.initiatorId; + scsiDev.target->reserverId = scsiDev.initiatorId; if (thirdPty) { - scsiDev.reservedId = thirdPtyId; + scsiDev.target->reservedId = thirdPtyId; } else { - scsiDev.reservedId = scsiDev.initiatorId; + scsiDev.target->reservedId = scsiDev.initiatorId; } } else @@ -431,14 +438,18 @@ static void scsiReset() scsiDev.resetFlag = 0; scsiDev.lun = -1; - if (scsiDev.unitAttention != POWER_ON_RESET) + if (scsiDev.target) { - scsiDev.unitAttention = SCSI_BUS_RESET; + if (scsiDev.target->unitAttention != POWER_ON_RESET) + { + scsiDev.target->unitAttention = SCSI_BUS_RESET; + } + scsiDev.target->reservedId = -1; + scsiDev.target->reserverId = -1; + scsiDev.target->sense.code = NO_SENSE; + scsiDev.target->sense.asc = NO_ADDITIONAL_SENSE_INFORMATION; } - scsiDev.reservedId = -1; - scsiDev.reserverId = -1; - scsiDev.sense.code = NO_SENSE; - scsiDev.sense.asc = NO_ADDITIONAL_SENSE_INFORMATION; + scsiDev.target = NULL; scsiDiskReset(); scsiDev.postDataOutHook = NULL; @@ -468,6 +479,9 @@ static void enter_SelectionPhase() scsiDev.discPriv = 0; scsiDev.compatMode = 0; + scsiDev.initiatorId = -1; + scsiDev.target = NULL; + transfer.blocks = 0; transfer.currentBlock = 0; @@ -486,11 +500,23 @@ static void process_SelectionPhase() int goodParity = (Lookup_OddParity[mask] == SCSI_ReadPin(SCSI_In_DBP)); int atnFlag = SCSI_ReadFilt(SCSI_Filt_ATN); + int tgtIndex; + TargetState* target = NULL; + for (tgtIndex = 0; tgtIndex < MAX_SCSI_TARGETS; ++tgtIndex) + { + if (mask & (1 << scsiDev.targets[tgtIndex].targetId)) + { + target = &scsiDev.targets[tgtIndex]; + break; + } + } if (!bsy && sel && - (mask & scsiDev.scsiIdMask) && - (goodParity || !config->enableParity || !atnFlag) && + target && + (goodParity || !(target->cfg->flags & CONFIG_ENABLE_PARITY) || !atnFlag) && (maskBitCount <= 2)) { + scsiDev.target = target; + // Do we enter MESSAGE OUT immediately ? SCSI 1 and 2 standards says // move to MESSAGE OUT if ATN is true before we assert BSY. // The initiator should assert ATN with SEL. @@ -502,7 +528,7 @@ static void process_SelectionPhase() // controllers don't generate parity bits. if (!scsiDev.atnFlag) { - scsiDev.unitAttention = 0; + target->unitAttention = 0; scsiDev.compatMode = 1; } @@ -529,11 +555,10 @@ static void process_SelectionPhase() // Save our initiator now that we're no longer in a time-critical // section. // SCSI1/SASI initiators may not set their own ID. - if (maskBitCount == 2) { int i; - uint8 initiatorMask = mask ^ scsiDev.scsiIdMask; - scsiDev.initiatorId = 0; + uint8_t initiatorMask = mask ^ (1 << target->targetId); + scsiDev.initiatorId = -1; for (i = 0; i < 8; ++i) { if (initiatorMask & (1 << i)) @@ -543,10 +568,6 @@ static void process_SelectionPhase() } } } - else - { - scsiDev.initiatorId = -1; - } scsiDev.phase = COMMAND; } @@ -565,7 +586,9 @@ static void process_MessageOut() scsiDev.msgOut = scsiReadByte(); scsiDev.msgCount++; - if (scsiDev.parityError && config->enableParity && !scsiDev.compatMode) + if (scsiDev.parityError && + (scsiDev.target->cfg->flags & CONFIG_ENABLE_PARITY) && + !scsiDev.compatMode) { // Skip the remaining message bytes, and then start the MESSAGE_OUT // phase again from the start. The initiator will re-send the @@ -596,11 +619,11 @@ static void process_MessageOut() scsiDiskReset(); - scsiDev.unitAttention = SCSI_BUS_RESET; + scsiDev.target->unitAttention = SCSI_BUS_RESET; // ANY initiator can reset the reservation state via this message. - scsiDev.reservedId = -1; - scsiDev.reserverId = -1; + scsiDev.target->reservedId = -1; + scsiDev.target->reserverId = -1; enter_BusFree(); } else if (scsiDev.msgOut == 0x05) @@ -810,14 +833,31 @@ void scsiPoll(void) void scsiInit() { - scsiDev.scsiIdMask = 1 << (config->scsiId); - scsiDev.atnFlag = 0; scsiDev.resetFlag = 1; scsiDev.phase = BUS_FREE; - scsiDev.reservedId = -1; - scsiDev.reserverId = -1; - scsiDev.unitAttention = POWER_ON_RESET; + scsiDev.target = NULL; + + int i; + for (i = 0; i < MAX_SCSI_TARGETS; ++i) + { + const TargetConfig* cfg = getConfigByIndex(i); + if (cfg && (cfg->scsiId & CONFIG_TARGET_ENABLED)) + { + scsiDev.targets[i].targetId = cfg->scsiId & CONFIG_TARGET_ID_BITS; + scsiDev.targets[i].cfg = cfg; + } + else + { + scsiDev.targets[i].targetId = 0xff; + scsiDev.targets[i].cfg = NULL; + } + scsiDev.targets[i].reservedId = -1; + scsiDev.targets[i].reserverId = -1; + scsiDev.targets[i].unitAttention = POWER_ON_RESET; + scsiDev.targets[i].sense.code = NO_SENSE; + scsiDev.targets[i].sense.asc = NO_ADDITIONAL_SENSE_INFORMATION; + } } void scsiDisconnect() @@ -852,7 +892,8 @@ int scsiReconnect() { // Arbitrate. ledOn(); - SCSI_Out_Bits_Write(scsiDev.scsiIdMask); + uint8_t scsiIdMask = 1 << scsiDev.target->targetId; + SCSI_Out_Bits_Write(scsiIdMask); SCSI_Out_Ctl_Write(1); // Write bits manually. SCSI_SetPin(SCSI_Out_BSY); @@ -860,7 +901,7 @@ int scsiReconnect() uint8_t dbx = scsiReadDBxPins(); sel = SCSI_ReadFilt(SCSI_Filt_SEL); - if (sel || ((dbx ^ scsiDev.scsiIdMask) > scsiDev.scsiIdMask)) + if (sel || ((dbx ^ scsiIdMask) > scsiIdMask)) { // Lost arbitration. SCSI_Out_Ctl_Write(0); @@ -875,7 +916,7 @@ int scsiReconnect() // Reselection phase SCSI_CTL_PHASE_Write(__scsiphase_io); - SCSI_Out_Bits_Write(scsiDev.scsiIdMask | (1 << scsiDev.initiatorId)); + SCSI_Out_Bits_Write(scsiIdMask | (1 << scsiDev.initiatorId)); scsiDeskewDelay(); // 2 deskew delays scsiDeskewDelay(); // 2 deskew delays SCSI_ClearPin(SCSI_Out_BSY); diff --git a/software/SCSI2SD/src/scsi.h b/software/SCSI2SD/src/scsi.h index 26e8930..8aa1cd5 100755 --- a/software/SCSI2SD/src/scsi.h +++ b/software/SCSI2SD/src/scsi.h @@ -63,7 +63,23 @@ typedef enum typedef struct { - uint8_t scsiIdMask; + uint8_t targetId; + const TargetConfig* cfg; + + ScsiSense sense; + + uint16 unitAttention; // Set to the sense qualifier key to be returned. + + // Only let the reserved initiator talk to us. + // A 3rd party may be sending the RESERVE/RELEASE commands + int reservedId; // 0 -> 7 if reserved. -1 if not reserved. + int reserverId; // 0 -> 7 if reserved. -1 if not reserved. +} TargetState; + +typedef struct +{ + TargetState targets[MAX_SCSI_TARGETS]; + TargetState* target; // Set to true (1) if the ATN flag was set, and we need to // enter the MESSAGE_OUT phase. @@ -91,17 +107,11 @@ typedef struct // Only let the reserved initiator talk to us. // A 3rd party may be sending the RESERVE/RELEASE commands int initiatorId; // 0 -> 7. Set during the selection phase. - int reservedId; // 0 -> 7 if reserved. -1 if not reserved. - int reserverId; // 0 -> 7 if reserved. -1 if not reserved. // SCSI_STATUS value. // Change to CHECK_CONDITION when setting a SENSE value uint8 status; - ScsiSense sense; - - uint16 unitAttention; // Set to the sense qualifier key to be returned. - uint8 msgIn; uint8 msgOut; diff --git a/software/SCSI2SD/src/sd.c b/software/SCSI2SD/src/sd.c index df77988..ba000d9 100755 --- a/software/SCSI2SD/src/sd.c +++ b/software/SCSI2SD/src/sd.c @@ -161,7 +161,7 @@ sdReadMultiSectorPrep() { uint8 v; uint32 scsiLBA = (transfer.lba + transfer.currentBlock); - uint32 sdLBA = SCSISector2SD(scsiLBA); + uint32 sdLBA = SCSISector2SD(scsiDev.target->cfg, scsiLBA); if (!sdDev.ccs) { @@ -174,8 +174,8 @@ sdReadMultiSectorPrep() sdClearStatus(); scsiDev.status = CHECK_CONDITION; - scsiDev.sense.code = HARDWARE_ERROR; - scsiDev.sense.asc = LOGICAL_UNIT_COMMUNICATION_FAILURE; + scsiDev.target->sense.code = HARDWARE_ERROR; + scsiDev.target->sense.asc = LOGICAL_UNIT_COMMUNICATION_FAILURE; scsiDev.phase = STATUS; } else @@ -205,8 +205,8 @@ dmaReadSector(uint8_t* outputBuffer) if (scsiDev.status != CHECK_CONDITION) { scsiDev.status = CHECK_CONDITION; - scsiDev.sense.code = HARDWARE_ERROR; - scsiDev.sense.asc = UNRECOVERED_READ_ERROR; + scsiDev.target->sense.code = HARDWARE_ERROR; + scsiDev.target->sense.asc = UNRECOVERED_READ_ERROR; scsiDev.phase = STATUS; } return; @@ -272,8 +272,8 @@ void sdReadSingleSectorDMA(uint32_t lba, uint8_t* outputBuffer) sdClearStatus(); scsiDev.status = CHECK_CONDITION; - scsiDev.sense.code = HARDWARE_ERROR; - scsiDev.sense.asc = LOGICAL_UNIT_COMMUNICATION_FAILURE; + scsiDev.target->sense.code = HARDWARE_ERROR; + scsiDev.target->sense.asc = LOGICAL_UNIT_COMMUNICATION_FAILURE; scsiDev.phase = STATUS; } else @@ -323,8 +323,8 @@ void sdCompleteRead() } scsiDev.status = CHECK_CONDITION; - scsiDev.sense.code = HARDWARE_ERROR; - scsiDev.sense.asc = UNRECOVERED_READ_ERROR; + scsiDev.target->sense.code = HARDWARE_ERROR; + scsiDev.target->sense.asc = UNRECOVERED_READ_ERROR; scsiDev.phase = STATUS; } @@ -418,8 +418,8 @@ sdWriteSectorDMAPoll() sdClearStatus(); scsiDev.status = CHECK_CONDITION; - scsiDev.sense.code = HARDWARE_ERROR; - scsiDev.sense.asc = LOGICAL_UNIT_COMMUNICATION_FAILURE; + scsiDev.target->sense.code = HARDWARE_ERROR; + scsiDev.target->sense.asc = LOGICAL_UNIT_COMMUNICATION_FAILURE; scsiDev.phase = STATUS; } else @@ -461,8 +461,8 @@ void sdCompleteWrite() { sdClearStatus(); scsiDev.status = CHECK_CONDITION; - scsiDev.sense.code = HARDWARE_ERROR; - scsiDev.sense.asc = WRITE_ERROR_AUTO_REALLOCATION_FAILED; + scsiDev.target->sense.code = HARDWARE_ERROR; + scsiDev.target->sense.asc = WRITE_ERROR_AUTO_REALLOCATION_FAILED; scsiDev.phase = STATUS; } } @@ -730,13 +730,14 @@ void sdWriteMultiSectorPrep() // We don't care about the response - if the command is not accepted, writes // will just be a bit slower. // Max 22bit parameter. - uint32_t sdBlocks = transfer.blocks * SDSectorsPerSCSISector(); + uint32_t sdBlocks = + transfer.blocks * SDSectorsPerSCSISector(scsiDev.target->cfg); uint32 blocks = sdBlocks > 0x7FFFFF ? 0x7FFFFF : sdBlocks; sdCommandAndResponse(SD_APP_CMD, 0); sdCommandAndResponse(SD_APP_SET_WR_BLK_ERASE_COUNT, blocks); uint32 scsiLBA = (transfer.lba + transfer.currentBlock); - uint32 sdLBA = SCSISector2SD(scsiLBA); + uint32 sdLBA = SCSISector2SD(scsiDev.target->cfg, scsiLBA); if (!sdDev.ccs) { sdLBA = sdLBA * SD_SECTOR_SIZE; @@ -747,8 +748,8 @@ void sdWriteMultiSectorPrep() scsiDiskReset(); sdClearStatus(); scsiDev.status = CHECK_CONDITION; - scsiDev.sense.code = HARDWARE_ERROR; - scsiDev.sense.asc = LOGICAL_UNIT_COMMUNICATION_FAILURE; + scsiDev.target->sense.code = HARDWARE_ERROR; + scsiDev.target->sense.asc = LOGICAL_UNIT_COMMUNICATION_FAILURE; scsiDev.phase = STATUS; } else diff --git a/software/SCSI2SD/v3/SCSI2SD.cydsn/Generated_Source/PSoCCreatorExportIDE.xml b/software/SCSI2SD/v3/SCSI2SD.cydsn/Generated_Source/PSoCCreatorExportIDE.xml index 53af611..00b5213 100755 --- a/software/SCSI2SD/v3/SCSI2SD.cydsn/Generated_Source/PSoCCreatorExportIDE.xml +++ b/software/SCSI2SD/v3/SCSI2SD.cydsn/Generated_Source/PSoCCreatorExportIDE.xml @@ -6,7 +6,7 @@ - + @@ -18,7 +18,7 @@ - + SCSI2SD.svd @@ -27,8 +27,8 @@ .\Generated_Source\PSoC5\Cm3Iar.icf - - + + ..\..\src\main.c ..\..\src\diagnostic.c ..\..\src\disk.c @@ -42,6 +42,8 @@ ..\..\src\config.c ..\..\src\led.c ..\..\src\time.c + ..\..\src\hidpacket.c + ..\..\src\cdrom.c ..\..\src\diagnostic.h ..\..\src\disk.h ..\..\src\geometry.h @@ -55,15 +57,22 @@ ..\..\src\sd.h ..\..\src\config.h ..\..\src\time.h + ..\..\src\cdrom.h - - + + .\device.h - - + + + ..\..\..\include\hidpacket.h + ..\..\..\include\scsi2sd.h + + + + .\Generated_Source\PSoC5\cyfitter_cfg.h .\Generated_Source\PSoC5\cyfitter_cfg.c .\Generated_Source\PSoC5\cydevice.h @@ -211,41 +220,41 @@ .\Generated_Source\PSoC5\libelf.dll - - + + .\Generated_Source\PSoC5\ARM_GCC\CyComponentLibrary.a - - + + .\Generated_Source\PSoC5\ARM_Keil_MDK\CyComponentLibrary.a - - + + .\Generated_Source\PSoC5\IAR\CyComponentLibrary.a - + - + - + - + - + - + - + diff --git a/software/SCSI2SD/v3/SCSI2SD.cydsn/SCSI2SD.cyfit b/software/SCSI2SD/v3/SCSI2SD.cydsn/SCSI2SD.cyfit index 514a296..00cc37a 100644 Binary files a/software/SCSI2SD/v3/SCSI2SD.cydsn/SCSI2SD.cyfit and b/software/SCSI2SD/v3/SCSI2SD.cydsn/SCSI2SD.cyfit differ diff --git a/software/SCSI2SD/v3/SCSI2SD.cydsn/SCSI2SD.cyprj b/software/SCSI2SD/v3/SCSI2SD.cydsn/SCSI2SD.cyprj index 9c35e69..4fd79e0 100755 --- a/software/SCSI2SD/v3/SCSI2SD.cydsn/SCSI2SD.cyprj +++ b/software/SCSI2SD/v3/SCSI2SD.cydsn/SCSI2SD.cyprj @@ -109,6 +109,20 @@ + + + + + + + + + + + + + + @@ -224,6 +238,27 @@ + + + + + + + + + + + + + + + + + + + + + @@ -3373,7 +3408,7 @@ - + @@ -3405,7 +3440,7 @@ - + diff --git a/software/SCSI2SD/v3/USB_Bootloader.cydsn/Generated_Source/PSoCCreatorExportIDE.xml b/software/SCSI2SD/v3/USB_Bootloader.cydsn/Generated_Source/PSoCCreatorExportIDE.xml index 6cfd4f2..2530471 100755 --- a/software/SCSI2SD/v3/USB_Bootloader.cydsn/Generated_Source/PSoCCreatorExportIDE.xml +++ b/software/SCSI2SD/v3/USB_Bootloader.cydsn/Generated_Source/PSoCCreatorExportIDE.xml @@ -18,7 +18,7 @@ - + USB_Bootloader.svd @@ -27,13 +27,13 @@ .\Generated_Source\PSoC5\Cm3Iar.icf - - + + .\main.c - - + + .\Generated_Source\PSoC5\cyfitter_cfg.h .\Generated_Source\PSoC5\cyfitter_cfg.c .\Generated_Source\PSoC5\cymetadata.c @@ -111,41 +111,41 @@ .\Generated_Source\PSoC5\libelf.dll - - + + .\Generated_Source\PSoC5\ARM_GCC\CyComponentLibrary.a - - + + .\Generated_Source\PSoC5\ARM_Keil_MDK\CyComponentLibrary.a - - + + .\Generated_Source\PSoC5\IAR\CyComponentLibrary.a - + - + - + - + - + - + - + diff --git a/software/SCSI2SD/v3/USB_Bootloader.cydsn/USB_Bootloader.cyfit b/software/SCSI2SD/v3/USB_Bootloader.cydsn/USB_Bootloader.cyfit index aeeabb3..744fc43 100644 Binary files a/software/SCSI2SD/v3/USB_Bootloader.cydsn/USB_Bootloader.cyfit and b/software/SCSI2SD/v3/USB_Bootloader.cydsn/USB_Bootloader.cyfit differ diff --git a/software/SCSI2SD/v3/USB_Bootloader.cydsn/USB_Bootloader.cyprj.Micha_000 b/software/SCSI2SD/v3/USB_Bootloader.cydsn/USB_Bootloader.cyprj.Micha_000 index 42f3368..2a57dc0 100755 --- a/software/SCSI2SD/v3/USB_Bootloader.cydsn/USB_Bootloader.cyprj.Micha_000 +++ b/software/SCSI2SD/v3/USB_Bootloader.cydsn/USB_Bootloader.cyprj.Micha_000 @@ -1116,7 +1116,7 @@ - + @@ -1669,14 +1669,14 @@ C:\Program Files (x86)\Cypress\PSoC Creator\3.0\PSoC Creator\warp\lib\common\stdlogic\mod_genv.vif C:\Program Files (x86)\Cypress\PSoC Creator\3.0\PSoC Creator\warp\lib\common\stdlogic\rtlpkg.vif - + - + diff --git a/software/SCSI2SD/v4/SCSI2SD.cydsn/Generated_Source/PSoCCreatorExportIDE.xml b/software/SCSI2SD/v4/SCSI2SD.cydsn/Generated_Source/PSoCCreatorExportIDE.xml index 46533e6..d63a6c6 100755 --- a/software/SCSI2SD/v4/SCSI2SD.cydsn/Generated_Source/PSoCCreatorExportIDE.xml +++ b/software/SCSI2SD/v4/SCSI2SD.cydsn/Generated_Source/PSoCCreatorExportIDE.xml @@ -6,7 +6,7 @@ - + @@ -18,7 +18,7 @@ - + SCSI2SD.svd @@ -27,8 +27,8 @@ .\Generated_Source\PSoC5\Cm3Iar.icf - - + + ..\..\src\main.c ..\..\src\diagnostic.c ..\..\src\disk.c @@ -42,6 +42,8 @@ ..\..\src\config.c ..\..\src\led.c ..\..\src\time.c + ..\..\src\hidpacket.c + ..\..\src\cdrom.c ..\..\src\diagnostic.h ..\..\src\disk.h ..\..\src\geometry.h @@ -55,15 +57,22 @@ ..\..\src\sd.h ..\..\src\config.h ..\..\src\time.h + ..\..\src\cdrom.h - - + + .\device.h - - + + + ..\..\..\include\scsi2sd.h + ..\..\..\include\hidpacket.h + + + + .\Generated_Source\PSoC5\cyfitter_cfg.h .\Generated_Source\PSoC5\cyfitter_cfg.c .\Generated_Source\PSoC5\cybootloader.c @@ -208,41 +217,41 @@ .\Generated_Source\PSoC5\libelf.dll - - + + .\Generated_Source\PSoC5\ARM_GCC\CyComponentLibrary.a - - + + .\Generated_Source\PSoC5\ARM_Keil_MDK\CyComponentLibrary.a - - + + .\Generated_Source\PSoC5\IAR\CyComponentLibrary.a - + - + - + - + - + - + - + diff --git a/software/SCSI2SD/v4/SCSI2SD.cydsn/SCSI2SD.cyfit b/software/SCSI2SD/v4/SCSI2SD.cydsn/SCSI2SD.cyfit index 7ac12a4..2e5c3a8 100644 Binary files a/software/SCSI2SD/v4/SCSI2SD.cydsn/SCSI2SD.cyfit and b/software/SCSI2SD/v4/SCSI2SD.cydsn/SCSI2SD.cyfit differ diff --git a/software/SCSI2SD/v4/SCSI2SD.cydsn/SCSI2SD.cyprj b/software/SCSI2SD/v4/SCSI2SD.cydsn/SCSI2SD.cyprj index b30c720..5bdf1f9 100755 --- a/software/SCSI2SD/v4/SCSI2SD.cydsn/SCSI2SD.cyprj +++ b/software/SCSI2SD/v4/SCSI2SD.cydsn/SCSI2SD.cyprj @@ -109,6 +109,20 @@ + + + + + + + + + + + + + + @@ -224,6 +238,27 @@ + + + + + + + + + + + + + + + + + + + + + @@ -2383,7 +2418,7 @@ - + @@ -2415,7 +2450,7 @@ - + @@ -2813,4 +2848,4 @@ - \ No newline at end of file + diff --git a/software/SCSI2SD/v4/USB_Bootloader.cydsn/USB_Bootloader.cyfit b/software/SCSI2SD/v4/USB_Bootloader.cydsn/USB_Bootloader.cyfit index e534dcd..470a7b5 100644 Binary files a/software/SCSI2SD/v4/USB_Bootloader.cydsn/USB_Bootloader.cyfit and b/software/SCSI2SD/v4/USB_Bootloader.cydsn/USB_Bootloader.cyfit differ diff --git a/software/build.sh b/software/build.sh index c724a35..d437f60 100755 --- a/software/build.sh +++ b/software/build.sh @@ -5,8 +5,7 @@ Linux) # Builds all of the utilities (not firmware) under Linux. # Requires mingw installed to cross-compile Windows targets. - (cd bootloaderhost && ./build.sh) && - (cd scsi2sd-config && ./build.sh) && + (cd scsi2sd-util && ./build.sh) && (cd scsi2sd-debug && ./build.sh) if [ $? -eq 0 ]; then @@ -14,30 +13,25 @@ Linux) mkdir -p build/windows/64bit mkdir -p build/windows/32bit - cp bootloaderhost/build/linux/bootloaderhost build/linux - cp scsi2sd-config/build/linux/scsi2sd-config build/linux + cp scsi2sd-util/build/linux/scsi2sd-util build/linux cp scsi2sd-debug/build/linux/scsi2sd-debug build/linux - cp bootloaderhost/build/windows/32bit/bootloaderhost.exe build/windows/32bit - cp scsi2sd-config/build/windows/32bit/scsi2sd-config.exe build/windows/32bit + cp scsi2sd-util/build/windows/32bit/scsi2sd-util.exe build/windows/32bit cp scsi2sd-debug/build/windows/32bit/scsi2sd-debug.exe build/windows/32bit - cp bootloaderhost/build/windows/64bit/bootloaderhost.exe build/windows/64bit - cp scsi2sd-config/build/windows/64bit/scsi2sd-config.exe build/windows/64bit + cp scsi2sd-util/build/windows/64bit/scsi2sd-util.exe build/windows/64bit cp scsi2sd-debug/build/windows/64bit/scsi2sd-debug.exe build/windows/64bit fi ;; Darwin) - make -C bootloaderhost && - make -C scsi2sd-config && + make -C scsi2sd-util && make -C scsi2sd-debug if [ $? -eq 0 ]; then mkdir -p build/mac - cp bootloaderhost/build/mac/bootloaderhost build/mac - cp scsi2sd-config/build/mac/scsi2sd-config build/mac + cp scsi2sd-util/build/mac/scsi2sd-util build/mac cp scsi2sd-debug/build/mac/scsi2sd-debug build/mac fi diff --git a/software/scsi2sd-util/ConfigUtil.cc b/software/scsi2sd-util/ConfigUtil.cc index 32c87bd..9e560fa 100644 --- a/software/scsi2sd-util/ConfigUtil.cc +++ b/software/scsi2sd-util/ConfigUtil.cc @@ -20,11 +20,64 @@ #include #include -#include using namespace SCSI2SD; +namespace +{ + // Endian conversion routines. + // The Cortex-M3 inside the Cypress PSoC 5LP is a + // little-endian device. + + bool isHostLE() + { + union + { + int i; + char c[sizeof(int)]; + } x; + x.i = 1; + return (x.c[0] == 1); + } + + uint16_t toLE16(uint16_t in) + { + if (isHostLE()) + { + return in; + } + else + { + return (in >> 8) | (in << 8); + } + } + uint16_t fromLE16(uint16_t in) + { + return toLE16(in); + } + + uint32_t toLE32(uint32_t in) + { + if (isHostLE()) + { + return in; + } + else + { + return (in >> 24) | + ((in >> 8) & 0xff00) | + ((in << 8) & 0xff0000) | + (in << 24); + } + } + uint32_t fromLE32(uint32_t in) + { + return toLE32(in); + } + +} + TargetConfig ConfigUtil::Default(size_t targetIdx) { @@ -64,11 +117,11 @@ ConfigUtil::fromBytes(const uint8_t* data) { TargetConfig result; memcpy(&result, data, sizeof(TargetConfig)); - result.sdSectorStart = ntohl(result.sdSectorStart); - result.scsiSectors = ntohl(result.scsiSectors); - result.bytesPerSector = ntohs(result.bytesPerSector); - result.sectorsPerTrack = ntohs(result.sectorsPerTrack); - result.headsPerCylinder = ntohs(result.headsPerCylinder); + result.sdSectorStart = toLE32(result.sdSectorStart); + result.scsiSectors = toLE32(result.scsiSectors); + result.bytesPerSector = toLE16(result.bytesPerSector); + result.sectorsPerTrack = toLE16(result.sectorsPerTrack); + result.headsPerCylinder = toLE16(result.headsPerCylinder); return result; } @@ -77,11 +130,11 @@ std::vector ConfigUtil::toBytes(const TargetConfig& _config) { TargetConfig config(_config); - config.sdSectorStart = htonl(config.sdSectorStart); - config.scsiSectors = htonl(config.scsiSectors); - config.bytesPerSector = htons(config.bytesPerSector); - config.sectorsPerTrack = htons(config.sectorsPerTrack); - config.headsPerCylinder = htons(config.headsPerCylinder); + config.sdSectorStart = fromLE32(config.sdSectorStart); + config.scsiSectors = fromLE32(config.scsiSectors); + config.bytesPerSector = fromLE16(config.bytesPerSector); + config.sectorsPerTrack = fromLE16(config.sectorsPerTrack); + config.headsPerCylinder = fromLE16(config.headsPerCylinder); const uint8_t* begin = reinterpret_cast(&config); return std::vector(begin, begin + sizeof(config)); diff --git a/software/scsi2sd-util/Makefile b/software/scsi2sd-util/Makefile index 1046f86..d765125 100644 --- a/software/scsi2sd-util/Makefile +++ b/software/scsi2sd-util/Makefile @@ -1,8 +1,9 @@ VPATH=cybootloaderutils ../SCSI2SD/src -CPPFLAGS = -I cybootloaderutils -I hidapi/hidapi -I wxWidgets/include -I ../include +CPPFLAGS = -I cybootloaderutils -I hidapi/hidapi -I wxWidgets/include -I ../include -Ilibzipper-1.0.3 -I$(BUILD)/zlib CFLAGS += -Wall -Wno-pointer-sign -O2 -g CXXFLAGS += -Wall -O2 -g -std=c++0x +LDFLAGS += -L$(BUILD)/libzipper/.libs -lzipper -L$(BUILD)/zlib -lz TARGET ?= $(shell uname -s) ifeq ($(TARGET),Win32) @@ -65,12 +66,33 @@ OBJ = \ $(BUILD)/hidpacket.o \ +$(OBJ): $(BUILD)/zlib/buildstamp +$(BUILD)/zlib/buildstamp: + mkdir -p $(dir $@) + ( \ + cd $(dir $@) && \ + cp -a $(CURDIR)/zlib-1.2.8/* . && \ + ./configure --static && \ + $(MAKE) \ + ) && \ + touch $@ + $(OBJ): $(BUILD)/wx.buildstamp -$(BUILD)/wx.buildstamp: +$(BUILD)/wx.buildstamp: $(BUILD)/zlib/buildstamp mkdir -p $(dir $@) ( \ cd $(BUILD) && \ - $(CURDIR)/wxWidgets/configure $(WX_CONFIG) && \ + $(CURDIR)/wxWidgets/configure $(WX_CONFIG) CPPFLAGS=-I$(BUILD)/zlib LDFLAGS=-I$(BUILD)/zlib && \ + $(MAKE) \ + ) && \ + touch $@ + +$(OBJ): $(BUILD)/libzipper/buildstamp +$(BUILD)/libzipper/buildstamp: + mkdir -p $(dir $@) + ( \ + cd $(dir $@) && \ + $(CURDIR)/libzipper-1.0.3/configure --disable-shared --enable-static && \ $(MAKE) \ ) && \ touch $@ @@ -88,5 +110,5 @@ $(BUILD)/scsi2sd-util$(EXE): $(OBJ) $(CXX) $(CXXFLAGS) $^ $(LDFLAGS) `$(BUILD)/wx-config --libs` -o $@ clean: - rm $(BUILD)/scsi2sd-util$(EXE) $(OBJ) + rm $(BUILD)/scsi2sd-util$(EXE) $(OBJ) $(BUILD)/libzipper/buildstamp diff --git a/software/scsi2sd-util/TargetPanel.cc b/software/scsi2sd-util/TargetPanel.cc index 565b02d..8d8e0ac 100644 --- a/software/scsi2sd-util/TargetPanel.cc +++ b/software/scsi2sd-util/TargetPanel.cc @@ -69,7 +69,7 @@ TargetPanel::TargetPanel(wxWindow* parent, const TargetConfig& initialConfig) : myNumSectorValidator(new wxIntegerValidator), mySizeValidator(new wxFloatingPointValidator(2)) { - wxFlexGridSizer *fgs = new wxFlexGridSizer(12, 3, 9, 25); + wxFlexGridSizer *fgs = new wxFlexGridSizer(13, 3, 9, 25); fgs->Add(new wxStaticText(this, wxID_ANY, wxT(""))); myEnableCtrl = @@ -100,6 +100,22 @@ TargetPanel::TargetPanel(wxWindow* parent, const TargetConfig& initialConfig) : fgs->Add(myScsiIdMsg); Bind(wxEVT_SPINCTRL, &TargetPanel::onInput, this, ID_scsiIdCtrl); + fgs->Add(new wxStaticText(this, wxID_ANY, wxT("Device Type"))); + wxString deviceTypes[] = {wxT("Hard Drive"), wxT("Removable"), wxT("CDROM")}; + myDeviceTypeCtrl = + new wxChoice( + this, + ID_deviceTypeCtrl, + wxDefaultPosition, + wxDefaultSize, + sizeof(deviceTypes) / sizeof(wxString), + deviceTypes + ); + myDeviceTypeCtrl->SetSelection(0); + fgs->Add(myDeviceTypeCtrl); + fgs->Add(new wxStaticText(this, wxID_ANY, wxT(""))); + Bind(wxEVT_CHOICE, &TargetPanel::onInput, this, ID_deviceTypeCtrl); + fgs->Add(new wxStaticText(this, wxID_ANY, wxT(""))); myParityCtrl = new wxCheckBox( @@ -186,7 +202,7 @@ TargetPanel::TargetPanel(wxWindow* parent, const TargetConfig& initialConfig) : mySizeCtrl->SetToolTip(wxT("Device size")); sizeContainer->Add(mySizeCtrl); wxString units[] = {wxT("KB"), wxT("MB"), wxT("GB")}; - mySizeUnitCtrl = + mySizeUnitCtrl = new wxChoice( this, ID_sizeUnitCtrl, @@ -351,6 +367,7 @@ TargetPanel::evaluate() bool enabled = myEnableCtrl->IsChecked(); { myScsiIdCtrl->Enable(enabled); + myDeviceTypeCtrl->Enable(enabled); myParityCtrl->Enable(enabled); myUnitAttCtrl->Enable(enabled); myStartSDSectorCtrl->Enable(enabled); @@ -471,6 +488,8 @@ TargetPanel::getConfig() const config.scsiId = config.scsiId | CONFIG_TARGET_ENABLED; } + config.deviceType = myDeviceTypeCtrl->GetSelection(); + config.flags = (myParityCtrl->IsChecked() ? CONFIG_ENABLE_PARITY : 0) | (myUnitAttCtrl->IsChecked() ? CONFIG_ENABLE_UNIT_ATTENTION : 0); @@ -503,6 +522,8 @@ TargetPanel::setConfig(const TargetConfig& config) myScsiIdCtrl->SetValue(config.scsiId & CONFIG_TARGET_ID_BITS); myEnableCtrl->SetValue(config.scsiId & CONFIG_TARGET_ENABLED); + myDeviceTypeCtrl->SetSelection(config.deviceType); + myParityCtrl->SetValue(config.flags & CONFIG_ENABLE_PARITY); myUnitAttCtrl->SetValue(config.flags & CONFIG_ENABLE_UNIT_ATTENTION); diff --git a/software/scsi2sd-util/TargetPanel.hh b/software/scsi2sd-util/TargetPanel.hh index 488f57d..769cd2e 100644 --- a/software/scsi2sd-util/TargetPanel.hh +++ b/software/scsi2sd-util/TargetPanel.hh @@ -74,6 +74,7 @@ private: { ID_enableCtrl = wxID_HIGHEST + 1, ID_scsiIdCtrl, + ID_deviceTypeCtrl, ID_parityCtrl, ID_unitAttCtrl, ID_startSDSectorCtrl, @@ -103,6 +104,8 @@ private: wxSpinCtrl* myScsiIdCtrl; wxStaticText* myScsiIdMsg; + wxChoice* myDeviceTypeCtrl; + wxCheckBox* myParityCtrl; wxCheckBox* myUnitAttCtrl; diff --git a/software/scsi2sd-util/build.sh b/software/scsi2sd-util/build.sh new file mode 100755 index 0000000..64b4eea --- /dev/null +++ b/software/scsi2sd-util/build.sh @@ -0,0 +1,7 @@ +#!/bin/sh + +rm -rf build/ +make && \ + make TARGET=Win32 && + make TARGET=Win64 + diff --git a/software/scsi2sd-util/libzipper-1.0.3/COPYING b/software/scsi2sd-util/libzipper-1.0.3/COPYING new file mode 100644 index 0000000..94a9ed0 --- /dev/null +++ b/software/scsi2sd-util/libzipper-1.0.3/COPYING @@ -0,0 +1,674 @@ + GNU GENERAL PUBLIC LICENSE + Version 3, 29 June 2007 + + Copyright (C) 2007 Free Software Foundation, Inc. + Everyone is permitted to copy and distribute verbatim copies + of this license document, but changing it is not allowed. + + Preamble + + The GNU General Public License is a free, copyleft license for +software and other kinds of works. + + The licenses for most software and other practical works are designed +to take away your freedom to share and change the works. By contrast, +the GNU General Public License is intended to guarantee your freedom to +share and change all versions of a program--to make sure it remains free +software for all its users. We, the Free Software Foundation, use the +GNU General Public License for most of our software; it applies also to +any other work released this way by its authors. You can apply it to +your programs, too. + + When we speak of free software, we are referring to freedom, not +price. Our General Public Licenses are designed to make sure that you +have the freedom to distribute copies of free software (and charge for +them if you wish), that you receive source code or can get it if you +want it, that you can change the software or use pieces of it in new +free programs, and that you know you can do these things. + + To protect your rights, we need to prevent others from denying you +these rights or asking you to surrender the rights. Therefore, you have +certain responsibilities if you distribute copies of the software, or if +you modify it: responsibilities to respect the freedom of others. + + For example, if you distribute copies of such a program, whether +gratis or for a fee, you must pass on to the recipients the same +freedoms that you received. You must make sure that they, too, receive +or can get the source code. And you must show them these terms so they +know their rights. + + Developers that use the GNU GPL protect your rights with two steps: +(1) assert copyright on the software, and (2) offer you this License +giving you legal permission to copy, distribute and/or modify it. + + For the developers' and authors' protection, the GPL clearly explains +that there is no warranty for this free software. For both users' and +authors' sake, the GPL requires that modified versions be marked as +changed, so that their problems will not be attributed erroneously to +authors of previous versions. + + Some devices are designed to deny users access to install or run +modified versions of the software inside them, although the manufacturer +can do so. This is fundamentally incompatible with the aim of +protecting users' freedom to change the software. The systematic +pattern of such abuse occurs in the area of products for individuals to +use, which is precisely where it is most unacceptable. Therefore, we +have designed this version of the GPL to prohibit the practice for those +products. If such problems arise substantially in other domains, we +stand ready to extend this provision to those domains in future versions +of the GPL, as needed to protect the freedom of users. + + Finally, every program is threatened constantly by software patents. +States should not allow patents to restrict development and use of +software on general-purpose computers, but in those that do, we wish to +avoid the special danger that patents applied to a free program could +make it effectively proprietary. To prevent this, the GPL assures that +patents cannot be used to render the program non-free. + + The precise terms and conditions for copying, distribution and +modification follow. + + TERMS AND CONDITIONS + + 0. Definitions. + + "This License" refers to version 3 of the GNU General Public License. + + "Copyright" also means copyright-like laws that apply to other kinds of +works, such as semiconductor masks. + + "The Program" refers to any copyrightable work licensed under this +License. Each licensee is addressed as "you". "Licensees" and +"recipients" may be individuals or organizations. + + To "modify" a work means to copy from or adapt all or part of the work +in a fashion requiring copyright permission, other than the making of an +exact copy. The resulting work is called a "modified version" of the +earlier work or a work "based on" the earlier work. + + A "covered work" means either the unmodified Program or a work based +on the Program. + + To "propagate" a work means to do anything with it that, without +permission, would make you directly or secondarily liable for +infringement under applicable copyright law, except executing it on a +computer or modifying a private copy. Propagation includes copying, +distribution (with or without modification), making available to the +public, and in some countries other activities as well. + + To "convey" a work means any kind of propagation that enables other +parties to make or receive copies. Mere interaction with a user through +a computer network, with no transfer of a copy, is not conveying. + + An interactive user interface displays "Appropriate Legal Notices" +to the extent that it includes a convenient and prominently visible +feature that (1) displays an appropriate copyright notice, and (2) +tells the user that there is no warranty for the work (except to the +extent that warranties are provided), that licensees may convey the +work under this License, and how to view a copy of this License. If +the interface presents a list of user commands or options, such as a +menu, a prominent item in the list meets this criterion. + + 1. Source Code. + + The "source code" for a work means the preferred form of the work +for making modifications to it. "Object code" means any non-source +form of a work. + + A "Standard Interface" means an interface that either is an official +standard defined by a recognized standards body, or, in the case of +interfaces specified for a particular programming language, one that +is widely used among developers working in that language. + + The "System Libraries" of an executable work include anything, other +than the work as a whole, that (a) is included in the normal form of +packaging a Major Component, but which is not part of that Major +Component, and (b) serves only to enable use of the work with that +Major Component, or to implement a Standard Interface for which an +implementation is available to the public in source code form. A +"Major Component", in this context, means a major essential component +(kernel, window system, and so on) of the specific operating system +(if any) on which the executable work runs, or a compiler used to +produce the work, or an object code interpreter used to run it. + + The "Corresponding Source" for a work in object code form means all +the source code needed to generate, install, and (for an executable +work) run the object code and to modify the work, including scripts to +control those activities. However, it does not include the work's +System Libraries, or general-purpose tools or generally available free +programs which are used unmodified in performing those activities but +which are not part of the work. For example, Corresponding Source +includes interface definition files associated with source files for +the work, and the source code for shared libraries and dynamically +linked subprograms that the work is specifically designed to require, +such as by intimate data communication or control flow between those +subprograms and other parts of the work. + + The Corresponding Source need not include anything that users +can regenerate automatically from other parts of the Corresponding +Source. + + The Corresponding Source for a work in source code form is that +same work. + + 2. Basic Permissions. + + All rights granted under this License are granted for the term of +copyright on the Program, and are irrevocable provided the stated +conditions are met. This License explicitly affirms your unlimited +permission to run the unmodified Program. The output from running a +covered work is covered by this License only if the output, given its +content, constitutes a covered work. This License acknowledges your +rights of fair use or other equivalent, as provided by copyright law. + + You may make, run and propagate covered works that you do not +convey, without conditions so long as your license otherwise remains +in force. You may convey covered works to others for the sole purpose +of having them make modifications exclusively for you, or provide you +with facilities for running those works, provided that you comply with +the terms of this License in conveying all material for which you do +not control copyright. Those thus making or running the covered works +for you must do so exclusively on your behalf, under your direction +and control, on terms that prohibit them from making any copies of +your copyrighted material outside their relationship with you. + + Conveying under any other circumstances is permitted solely under +the conditions stated below. Sublicensing is not allowed; section 10 +makes it unnecessary. + + 3. Protecting Users' Legal Rights From Anti-Circumvention Law. + + No covered work shall be deemed part of an effective technological +measure under any applicable law fulfilling obligations under article +11 of the WIPO copyright treaty adopted on 20 December 1996, or +similar laws prohibiting or restricting circumvention of such +measures. + + When you convey a covered work, you waive any legal power to forbid +circumvention of technological measures to the extent such circumvention +is effected by exercising rights under this License with respect to +the covered work, and you disclaim any intention to limit operation or +modification of the work as a means of enforcing, against the work's +users, your or third parties' legal rights to forbid circumvention of +technological measures. + + 4. Conveying Verbatim Copies. + + You may convey verbatim copies of the Program's source code as you +receive it, in any medium, provided that you conspicuously and +appropriately publish on each copy an appropriate copyright notice; +keep intact all notices stating that this License and any +non-permissive terms added in accord with section 7 apply to the code; +keep intact all notices of the absence of any warranty; and give all +recipients a copy of this License along with the Program. + + You may charge any price or no price for each copy that you convey, +and you may offer support or warranty protection for a fee. + + 5. Conveying Modified Source Versions. + + You may convey a work based on the Program, or the modifications to +produce it from the Program, in the form of source code under the +terms of section 4, provided that you also meet all of these conditions: + + a) The work must carry prominent notices stating that you modified + it, and giving a relevant date. + + b) The work must carry prominent notices stating that it is + released under this License and any conditions added under section + 7. This requirement modifies the requirement in section 4 to + "keep intact all notices". + + c) You must license the entire work, as a whole, under this + License to anyone who comes into possession of a copy. This + License will therefore apply, along with any applicable section 7 + additional terms, to the whole of the work, and all its parts, + regardless of how they are packaged. This License gives no + permission to license the work in any other way, but it does not + invalidate such permission if you have separately received it. + + d) If the work has interactive user interfaces, each must display + Appropriate Legal Notices; however, if the Program has interactive + interfaces that do not display Appropriate Legal Notices, your + work need not make them do so. + + A compilation of a covered work with other separate and independent +works, which are not by their nature extensions of the covered work, +and which are not combined with it such as to form a larger program, +in or on a volume of a storage or distribution medium, is called an +"aggregate" if the compilation and its resulting copyright are not +used to limit the access or legal rights of the compilation's users +beyond what the individual works permit. Inclusion of a covered work +in an aggregate does not cause this License to apply to the other +parts of the aggregate. + + 6. Conveying Non-Source Forms. + + You may convey a covered work in object code form under the terms +of sections 4 and 5, provided that you also convey the +machine-readable Corresponding Source under the terms of this License, +in one of these ways: + + a) Convey the object code in, or embodied in, a physical product + (including a physical distribution medium), accompanied by the + Corresponding Source fixed on a durable physical medium + customarily used for software interchange. + + b) Convey the object code in, or embodied in, a physical product + (including a physical distribution medium), accompanied by a + written offer, valid for at least three years and valid for as + long as you offer spare parts or customer support for that product + model, to give anyone who possesses the object code either (1) a + copy of the Corresponding Source for all the software in the + product that is covered by this License, on a durable physical + medium customarily used for software interchange, for a price no + more than your reasonable cost of physically performing this + conveying of source, or (2) access to copy the + Corresponding Source from a network server at no charge. + + c) Convey individual copies of the object code with a copy of the + written offer to provide the Corresponding Source. This + alternative is allowed only occasionally and noncommercially, and + only if you received the object code with such an offer, in accord + with subsection 6b. + + d) Convey the object code by offering access from a designated + place (gratis or for a charge), and offer equivalent access to the + Corresponding Source in the same way through the same place at no + further charge. You need not require recipients to copy the + Corresponding Source along with the object code. If the place to + copy the object code is a network server, the Corresponding Source + may be on a different server (operated by you or a third party) + that supports equivalent copying facilities, provided you maintain + clear directions next to the object code saying where to find the + Corresponding Source. Regardless of what server hosts the + Corresponding Source, you remain obligated to ensure that it is + available for as long as needed to satisfy these requirements. + + e) Convey the object code using peer-to-peer transmission, provided + you inform other peers where the object code and Corresponding + Source of the work are being offered to the general public at no + charge under subsection 6d. + + A separable portion of the object code, whose source code is excluded +from the Corresponding Source as a System Library, need not be +included in conveying the object code work. + + A "User Product" is either (1) a "consumer product", which means any +tangible personal property which is normally used for personal, family, +or household purposes, or (2) anything designed or sold for incorporation +into a dwelling. In determining whether a product is a consumer product, +doubtful cases shall be resolved in favor of coverage. For a particular +product received by a particular user, "normally used" refers to a +typical or common use of that class of product, regardless of the status +of the particular user or of the way in which the particular user +actually uses, or expects or is expected to use, the product. A product +is a consumer product regardless of whether the product has substantial +commercial, industrial or non-consumer uses, unless such uses represent +the only significant mode of use of the product. + + "Installation Information" for a User Product means any methods, +procedures, authorization keys, or other information required to install +and execute modified versions of a covered work in that User Product from +a modified version of its Corresponding Source. The information must +suffice to ensure that the continued functioning of the modified object +code is in no case prevented or interfered with solely because +modification has been made. + + If you convey an object code work under this section in, or with, or +specifically for use in, a User Product, and the conveying occurs as +part of a transaction in which the right of possession and use of the +User Product is transferred to the recipient in perpetuity or for a +fixed term (regardless of how the transaction is characterized), the +Corresponding Source conveyed under this section must be accompanied +by the Installation Information. But this requirement does not apply +if neither you nor any third party retains the ability to install +modified object code on the User Product (for example, the work has +been installed in ROM). + + The requirement to provide Installation Information does not include a +requirement to continue to provide support service, warranty, or updates +for a work that has been modified or installed by the recipient, or for +the User Product in which it has been modified or installed. Access to a +network may be denied when the modification itself materially and +adversely affects the operation of the network or violates the rules and +protocols for communication across the network. + + Corresponding Source conveyed, and Installation Information provided, +in accord with this section must be in a format that is publicly +documented (and with an implementation available to the public in +source code form), and must require no special password or key for +unpacking, reading or copying. + + 7. Additional Terms. + + "Additional permissions" are terms that supplement the terms of this +License by making exceptions from one or more of its conditions. +Additional permissions that are applicable to the entire Program shall +be treated as though they were included in this License, to the extent +that they are valid under applicable law. If additional permissions +apply only to part of the Program, that part may be used separately +under those permissions, but the entire Program remains governed by +this License without regard to the additional permissions. + + When you convey a copy of a covered work, you may at your option +remove any additional permissions from that copy, or from any part of +it. (Additional permissions may be written to require their own +removal in certain cases when you modify the work.) You may place +additional permissions on material, added by you to a covered work, +for which you have or can give appropriate copyright permission. + + Notwithstanding any other provision of this License, for material you +add to a covered work, you may (if authorized by the copyright holders of +that material) supplement the terms of this License with terms: + + a) Disclaiming warranty or limiting liability differently from the + terms of sections 15 and 16 of this License; or + + b) Requiring preservation of specified reasonable legal notices or + author attributions in that material or in the Appropriate Legal + Notices displayed by works containing it; or + + c) Prohibiting misrepresentation of the origin of that material, or + requiring that modified versions of such material be marked in + reasonable ways as different from the original version; or + + d) Limiting the use for publicity purposes of names of licensors or + authors of the material; or + + e) Declining to grant rights under trademark law for use of some + trade names, trademarks, or service marks; or + + f) Requiring indemnification of licensors and authors of that + material by anyone who conveys the material (or modified versions of + it) with contractual assumptions of liability to the recipient, for + any liability that these contractual assumptions directly impose on + those licensors and authors. + + All other non-permissive additional terms are considered "further +restrictions" within the meaning of section 10. If the Program as you +received it, or any part of it, contains a notice stating that it is +governed by this License along with a term that is a further +restriction, you may remove that term. If a license document contains +a further restriction but permits relicensing or conveying under this +License, you may add to a covered work material governed by the terms +of that license document, provided that the further restriction does +not survive such relicensing or conveying. + + If you add terms to a covered work in accord with this section, you +must place, in the relevant source files, a statement of the +additional terms that apply to those files, or a notice indicating +where to find the applicable terms. + + Additional terms, permissive or non-permissive, may be stated in the +form of a separately written license, or stated as exceptions; +the above requirements apply either way. + + 8. Termination. + + You may not propagate or modify a covered work except as expressly +provided under this License. Any attempt otherwise to propagate or +modify it is void, and will automatically terminate your rights under +this License (including any patent licenses granted under the third +paragraph of section 11). + + However, if you cease all violation of this License, then your +license from a particular copyright holder is reinstated (a) +provisionally, unless and until the copyright holder explicitly and +finally terminates your license, and (b) permanently, if the copyright +holder fails to notify you of the violation by some reasonable means +prior to 60 days after the cessation. + + Moreover, your license from a particular copyright holder is +reinstated permanently if the copyright holder notifies you of the +violation by some reasonable means, this is the first time you have +received notice of violation of this License (for any work) from that +copyright holder, and you cure the violation prior to 30 days after +your receipt of the notice. + + Termination of your rights under this section does not terminate the +licenses of parties who have received copies or rights from you under +this License. If your rights have been terminated and not permanently +reinstated, you do not qualify to receive new licenses for the same +material under section 10. + + 9. Acceptance Not Required for Having Copies. + + You are not required to accept this License in order to receive or +run a copy of the Program. Ancillary propagation of a covered work +occurring solely as a consequence of using peer-to-peer transmission +to receive a copy likewise does not require acceptance. However, +nothing other than this License grants you permission to propagate or +modify any covered work. These actions infringe copyright if you do +not accept this License. Therefore, by modifying or propagating a +covered work, you indicate your acceptance of this License to do so. + + 10. Automatic Licensing of Downstream Recipients. + + Each time you convey a covered work, the recipient automatically +receives a license from the original licensors, to run, modify and +propagate that work, subject to this License. You are not responsible +for enforcing compliance by third parties with this License. + + An "entity transaction" is a transaction transferring control of an +organization, or substantially all assets of one, or subdividing an +organization, or merging organizations. If propagation of a covered +work results from an entity transaction, each party to that +transaction who receives a copy of the work also receives whatever +licenses to the work the party's predecessor in interest had or could +give under the previous paragraph, plus a right to possession of the +Corresponding Source of the work from the predecessor in interest, if +the predecessor has it or can get it with reasonable efforts. + + You may not impose any further restrictions on the exercise of the +rights granted or affirmed under this License. For example, you may +not impose a license fee, royalty, or other charge for exercise of +rights granted under this License, and you may not initiate litigation +(including a cross-claim or counterclaim in a lawsuit) alleging that +any patent claim is infringed by making, using, selling, offering for +sale, or importing the Program or any portion of it. + + 11. Patents. + + A "contributor" is a copyright holder who authorizes use under this +License of the Program or a work on which the Program is based. The +work thus licensed is called the contributor's "contributor version". + + A contributor's "essential patent claims" are all patent claims +owned or controlled by the contributor, whether already acquired or +hereafter acquired, that would be infringed by some manner, permitted +by this License, of making, using, or selling its contributor version, +but do not include claims that would be infringed only as a +consequence of further modification of the contributor version. For +purposes of this definition, "control" includes the right to grant +patent sublicenses in a manner consistent with the requirements of +this License. + + Each contributor grants you a non-exclusive, worldwide, royalty-free +patent license under the contributor's essential patent claims, to +make, use, sell, offer for sale, import and otherwise run, modify and +propagate the contents of its contributor version. + + In the following three paragraphs, a "patent license" is any express +agreement or commitment, however denominated, not to enforce a patent +(such as an express permission to practice a patent or covenant not to +sue for patent infringement). To "grant" such a patent license to a +party means to make such an agreement or commitment not to enforce a +patent against the party. + + If you convey a covered work, knowingly relying on a patent license, +and the Corresponding Source of the work is not available for anyone +to copy, free of charge and under the terms of this License, through a +publicly available network server or other readily accessible means, +then you must either (1) cause the Corresponding Source to be so +available, or (2) arrange to deprive yourself of the benefit of the +patent license for this particular work, or (3) arrange, in a manner +consistent with the requirements of this License, to extend the patent +license to downstream recipients. "Knowingly relying" means you have +actual knowledge that, but for the patent license, your conveying the +covered work in a country, or your recipient's use of the covered work +in a country, would infringe one or more identifiable patents in that +country that you have reason to believe are valid. + + If, pursuant to or in connection with a single transaction or +arrangement, you convey, or propagate by procuring conveyance of, a +covered work, and grant a patent license to some of the parties +receiving the covered work authorizing them to use, propagate, modify +or convey a specific copy of the covered work, then the patent license +you grant is automatically extended to all recipients of the covered +work and works based on it. + + A patent license is "discriminatory" if it does not include within +the scope of its coverage, prohibits the exercise of, or is +conditioned on the non-exercise of one or more of the rights that are +specifically granted under this License. You may not convey a covered +work if you are a party to an arrangement with a third party that is +in the business of distributing software, under which you make payment +to the third party based on the extent of your activity of conveying +the work, and under which the third party grants, to any of the +parties who would receive the covered work from you, a discriminatory +patent license (a) in connection with copies of the covered work +conveyed by you (or copies made from those copies), or (b) primarily +for and in connection with specific products or compilations that +contain the covered work, unless you entered into that arrangement, +or that patent license was granted, prior to 28 March 2007. + + Nothing in this License shall be construed as excluding or limiting +any implied license or other defenses to infringement that may +otherwise be available to you under applicable patent law. + + 12. No Surrender of Others' Freedom. + + If conditions are imposed on you (whether by court order, agreement or +otherwise) that contradict the conditions of this License, they do not +excuse you from the conditions of this License. If you cannot convey a +covered work so as to satisfy simultaneously your obligations under this +License and any other pertinent obligations, then as a consequence you may +not convey it at all. For example, if you agree to terms that obligate you +to collect a royalty for further conveying from those to whom you convey +the Program, the only way you could satisfy both those terms and this +License would be to refrain entirely from conveying the Program. + + 13. Use with the GNU Affero General Public License. + + Notwithstanding any other provision of this License, you have +permission to link or combine any covered work with a work licensed +under version 3 of the GNU Affero General Public License into a single +combined work, and to convey the resulting work. The terms of this +License will continue to apply to the part which is the covered work, +but the special requirements of the GNU Affero General Public License, +section 13, concerning interaction through a network will apply to the +combination as such. + + 14. Revised Versions of this License. + + The Free Software Foundation may publish revised and/or new versions of +the GNU General Public License from time to time. Such new versions will +be similar in spirit to the present version, but may differ in detail to +address new problems or concerns. + + Each version is given a distinguishing version number. If the +Program specifies that a certain numbered version of the GNU General +Public License "or any later version" applies to it, you have the +option of following the terms and conditions either of that numbered +version or of any later version published by the Free Software +Foundation. If the Program does not specify a version number of the +GNU General Public License, you may choose any version ever published +by the Free Software Foundation. + + If the Program specifies that a proxy can decide which future +versions of the GNU General Public License can be used, that proxy's +public statement of acceptance of a version permanently authorizes you +to choose that version for the Program. + + Later license versions may give you additional or different +permissions. However, no additional obligations are imposed on any +author or copyright holder as a result of your choosing to follow a +later version. + + 15. Disclaimer of Warranty. + + THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY +APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT +HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY +OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, +THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR +PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM +IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF +ALL NECESSARY SERVICING, REPAIR OR CORRECTION. + + 16. Limitation of Liability. + + IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING +WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS +THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY +GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE +USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF +DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD +PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), +EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF +SUCH DAMAGES. + + 17. Interpretation of Sections 15 and 16. + + If the disclaimer of warranty and limitation of liability provided +above cannot be given local legal effect according to their terms, +reviewing courts shall apply local law that most closely approximates +an absolute waiver of all civil liability in connection with the +Program, unless a warranty or assumption of liability accompanies a +copy of the Program in return for a fee. + + END OF TERMS AND CONDITIONS + + How to Apply These Terms to Your New Programs + + If you develop a new program, and you want it to be of the greatest +possible use to the public, the best way to achieve this is to make it +free software which everyone can redistribute and change under these terms. + + To do so, attach the following notices to the program. It is safest +to attach them to the start of each source file to most effectively +state the exclusion of warranty; and each file should have at least +the "copyright" line and a pointer to where the full notice is found. + + + Copyright (C) + + This program is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see . + +Also add information on how to contact you by electronic and paper mail. + + If the program does terminal interaction, make it output a short +notice like this when it starts in an interactive mode: + + Copyright (C) + This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'. + This is free software, and you are welcome to redistribute it + under certain conditions; type `show c' for details. + +The hypothetical commands `show w' and `show c' should show the appropriate +parts of the General Public License. Of course, your program's commands +might be different; for a GUI interface, you would use an "about box". + + You should also get your employer (if you work as a programmer) or school, +if any, to sign a "copyright disclaimer" for the program, if necessary. +For more information on this, and how to apply and follow the GNU GPL, see +. + + The GNU General Public License does not permit incorporating your program +into proprietary programs. If your program is a subroutine library, you +may consider it more useful to permit linking proprietary applications with +the library. If this is what you want to do, use the GNU Lesser General +Public License instead of this License. But first, please read +. diff --git a/software/scsi2sd-util/libzipper-1.0.3/CompressedFile.cc b/software/scsi2sd-util/libzipper-1.0.3/CompressedFile.cc new file mode 100644 index 0000000..6f03c6b --- /dev/null +++ b/software/scsi2sd-util/libzipper-1.0.3/CompressedFile.cc @@ -0,0 +1,26 @@ +// Copyright (C) 2011 Michael McMaster +// +// This file is part of libzipper. +// +// libzipper is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// libzipper is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with libzipper. If not, see . + +#include "zipper.hh" + +using namespace zipper; + +CompressedFile::~CompressedFile() +{ +} + + diff --git a/software/scsi2sd-util/libzipper-1.0.3/Compressor.cc b/software/scsi2sd-util/libzipper-1.0.3/Compressor.cc new file mode 100644 index 0000000..8d12ccf --- /dev/null +++ b/software/scsi2sd-util/libzipper-1.0.3/Compressor.cc @@ -0,0 +1,152 @@ +// Copyright (C) 2011 Michael McMaster +// +// This file is part of libzipper. +// +// libzipper is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// libzipper is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with libzipper. If not, see . + +#include "zipper.hh" +#include "gzip.hh" +#include "zip.hh" +#include "util.hh" + +#include + +using namespace zipper; + +class Compressor::CompressorImpl +{ +public: + virtual ~CompressorImpl() {} + + virtual void + addFile(const std::string& filename, const Reader& reader) = 0; +}; + +namespace +{ + class PlainCompressor : public Compressor::CompressorImpl + { + public: + PlainCompressor(const WriterPtr& writer) : m_writer(writer) {} + + virtual void + addFile(const std::string&, const Reader& reader) + { + enum Constants + { + ChunkSize = 64*1024 + }; + + uint8_t buffer[ChunkSize]; + zsize_t offset(0); + while (offset < reader.getSize()) + { + zsize_t bytes( + std::min(zsize_t(ChunkSize), reader.getSize() - offset)); + reader.readData(offset, bytes, &buffer[0]); + m_writer->writeData(offset, bytes, &buffer[0]); + offset += bytes; + } + } + private: + WriterPtr m_writer; + }; + + class ZipCompressor : public Compressor::CompressorImpl + { + public: + ZipCompressor(const WriterPtr& writer) : m_writer(writer) {} + + virtual ~ZipCompressor() + { + zipFinalise(m_records, m_writer); + } + + virtual void + addFile(const std::string& filename, const Reader& reader) + { + ZipFileRecord record; + zip(filename, reader, m_writer, record); + m_records.push_back(record); + } + private: + WriterPtr m_writer; + std::vector m_records; + }; + + class GzipCompressor : public Compressor::CompressorImpl + { + public: + GzipCompressor(const WriterPtr& writer) : m_writer(writer) {} + + virtual void + addFile(const std::string& filename, const Reader& reader) + { + gzip(filename, reader, m_writer); + } + private: + WriterPtr m_writer; + }; +} + +Compressor::Compressor(ContainerFormat format, const WriterPtr& writer) +{ + switch (format) + { + case Container_none: + m_compressor = new PlainCompressor(writer); break; + + case Container_zip: + m_compressor = new ZipCompressor(writer); break; + + case Container_gzip: + m_compressor = new GzipCompressor(writer); break; + + default: + throw UnsupportedException("Unknown format"); + } +} + +Compressor::Compressor(ContainerFormat format, Writer& writer) : + m_compressor(NULL) +{ + WriterPtr ptr(&writer, dummy_delete()); + switch (format) + { + case Container_none: + m_compressor = new PlainCompressor(ptr); break; + + case Container_zip: + m_compressor = new ZipCompressor(ptr); break; + + case Container_gzip: + m_compressor = new GzipCompressor(ptr); break; + + default: + throw UnsupportedException("Unknown format"); + } +} + +Compressor::~Compressor() +{ + delete m_compressor; +} + +void +Compressor::addFile(const Reader& reader) +{ + m_compressor->addFile(reader.getSourceName(), reader); +} + + diff --git a/software/scsi2sd-util/libzipper-1.0.3/Container.cc b/software/scsi2sd-util/libzipper-1.0.3/Container.cc new file mode 100644 index 0000000..273f6d2 --- /dev/null +++ b/software/scsi2sd-util/libzipper-1.0.3/Container.cc @@ -0,0 +1,47 @@ +// Copyright (C) 2011 Michael McMaster +// +// This file is part of libzipper. +// +// libzipper is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// libzipper is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with libzipper. If not, see . + +#include "zipper.hh" + +using namespace zipper; + +namespace +{ + struct Container info_none = + { Container_none, "application/octet-stream", 13 }; + struct Container info_zip = + { Container_zip, "application/zip", 0x1f }; + struct Container info_gzip = + { Container_gzip, "zpplication/x-gzip", 7 }; +} + +namespace zipper +{ + const Container& + getContainer(ContainerFormat format) + { + switch (format) + { + case Container_none: return info_none; + case Container_zip: return info_zip; + case Container_gzip: return info_gzip; + default: throw Exception("Unknown format type requested"); + } + + } +} + diff --git a/software/scsi2sd-util/libzipper-1.0.3/Decompressor.cc b/software/scsi2sd-util/libzipper-1.0.3/Decompressor.cc new file mode 100644 index 0000000..94c4942 --- /dev/null +++ b/software/scsi2sd-util/libzipper-1.0.3/Decompressor.cc @@ -0,0 +1,142 @@ +// Copyright (C) 2011 Michael McMaster +// +// This file is part of libzipper. +// +// libzipper is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// libzipper is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with libzipper. If not, see . + +#include "zipper.hh" +#include "util.hh" + +#include "gzip.hh" +#include "zip.hh" + +using namespace zipper; + +namespace +{ + class PlainFile : public CompressedFile + { + public: + PlainFile(const ReaderPtr& reader) : + m_reader(reader) + {} + + virtual bool isDecompressSupported() const { return true; } + virtual const std::string& getPath() const + { + return m_reader->getSourceName(); + } + virtual zsize_t getCompressedSize() const + { + return m_reader->getSize(); + } + virtual zsize_t getUncompressedSize() const + { + return m_reader->getSize(); + } + + virtual void decompress(Writer& writer) + { + enum Constants + { + ChunkSize = 64*1024 + }; + zsize_t end(m_reader->getSize()); + + for (zsize_t pos(0); pos < end; pos += ChunkSize) + { + uint8_t buf[ChunkSize]; + size_t bytes( + std::min(zsize_t(ChunkSize), end - pos) + ); + m_reader->readData(pos, bytes, &buf[0]); + writer.writeData(pos, bytes, &buf[0]); + } + } + + virtual const timeval& getModificationTime() const + { + return m_reader->getModTime(); + } + + private: + ReaderPtr m_reader; + }; +} + +class Decompressor::DecompressorImpl +{ +public: + DecompressorImpl(const ReaderPtr& reader) : + m_reader(reader), + m_format(Container_none) + { + if (isZip(reader)) + { + m_format = Container_zip; + m_entries = unzip(reader); + } + else if (isGzip(reader)) + { + m_format = Container_gzip; + m_entries = ungzip(reader); + } + else + { + m_format = Container_none; + m_entries.push_back( + CompressedFilePtr(new PlainFile(reader)) + ); + } + } + + ContainerFormat getContainerFormat() const { return m_format; } + + std::vector getEntries() const { return m_entries; } + +private: + ReaderPtr m_reader; + ContainerFormat m_format; + std::vector m_entries; +}; + +Decompressor::Decompressor(const ReaderPtr& reader) : + m_decompressor(new DecompressorImpl(reader)) +{ +} + +Decompressor::Decompressor(Reader& reader) : + m_decompressor( + new DecompressorImpl(ReaderPtr(&reader, dummy_delete())) + ) +{ +} + +Decompressor::~Decompressor() +{ + delete m_decompressor; +} + +ContainerFormat +Decompressor::getContainerFormat() const +{ + return m_decompressor->getContainerFormat(); +} + +std::vector +Decompressor::getEntries() const +{ + return m_decompressor->getEntries(); +} + diff --git a/software/scsi2sd-util/libzipper-1.0.3/Doxyfile.in b/software/scsi2sd-util/libzipper-1.0.3/Doxyfile.in new file mode 100644 index 0000000..9a489b7 --- /dev/null +++ b/software/scsi2sd-util/libzipper-1.0.3/Doxyfile.in @@ -0,0 +1,1661 @@ +# Doxyfile 1.7.1 + +# This file describes the settings to be used by the documentation system +# doxygen (www.doxygen.org) for a project +# +# All text after a hash (#) is considered a comment and will be ignored +# The format is: +# TAG = value [value, ...] +# For lists items can also be appended using: +# TAG += value [value, ...] +# Values that contain spaces should be placed between quotes (" ") + +#--------------------------------------------------------------------------- +# Project related configuration options +#--------------------------------------------------------------------------- + +# This tag specifies the encoding used for all characters in the config file +# that follow. The default is UTF-8 which is also the encoding used for all +# text before the first occurrence of this tag. Doxygen uses libiconv (or the +# iconv built into libc) for the transcoding. See +# http://www.gnu.org/software/libiconv for the list of possible encodings. + +DOXYFILE_ENCODING = UTF-8 + +# The PROJECT_NAME tag is a single word (or a sequence of words surrounded +# by quotes) that should identify the project. + +PROJECT_NAME = libzipper + +# The PROJECT_NUMBER tag can be used to enter a project or revision number. +# This could be handy for archiving the generated documentation or +# if some version control system is used. + +PROJECT_NUMBER = @libzipper_version@ + +# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) +# base path where the generated documentation will be put. +# If a relative path is entered, it will be relative to the location +# where doxygen was started. If left blank the current directory will be used. + +OUTPUT_DIRECTORY = doc + +# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create +# 4096 sub-directories (in 2 levels) under the output directory of each output +# format and will distribute the generated files over these directories. +# Enabling this option can be useful when feeding doxygen a huge amount of +# source files, where putting all generated files in the same directory would +# otherwise cause performance problems for the file system. + +CREATE_SUBDIRS = NO + +# The OUTPUT_LANGUAGE tag is used to specify the language in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all constant output in the proper language. +# The default language is English, other supported languages are: +# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, +# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, +# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English +# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, +# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak, +# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. + +OUTPUT_LANGUAGE = English + +# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will +# include brief member descriptions after the members that are listed in +# the file and class documentation (similar to JavaDoc). +# Set to NO to disable this. + +BRIEF_MEMBER_DESC = YES + +# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend +# the brief description of a member or function before the detailed description. +# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the +# brief descriptions will be completely suppressed. + +REPEAT_BRIEF = YES + +# This tag implements a quasi-intelligent brief description abbreviator +# that is used to form the text in various listings. Each string +# in this list, if found as the leading text of the brief description, will be +# stripped from the text and the result after processing the whole list, is +# used as the annotated text. Otherwise, the brief description is used as-is. +# If left blank, the following values are used ("$name" is automatically +# replaced with the name of the entity): "The $name class" "The $name widget" +# "The $name file" "is" "provides" "specifies" "contains" +# "represents" "a" "an" "the" + +ABBREVIATE_BRIEF = "The $name class" \ + "The $name widget" \ + "The $name file" \ + is \ + provides \ + specifies \ + contains \ + represents \ + a \ + an \ + the + +# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then +# Doxygen will generate a detailed section even if there is only a brief +# description. + +ALWAYS_DETAILED_SEC = NO + +# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all +# inherited members of a class in the documentation of that class as if those +# members were ordinary class members. Constructors, destructors and assignment +# operators of the base classes will not be shown. + +INLINE_INHERITED_MEMB = YES + +# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full +# path before files name in the file list and in the header files. If set +# to NO the shortest path that makes the file name unique will be used. + +FULL_PATH_NAMES = YES + +# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag +# can be used to strip a user-defined part of the path. Stripping is +# only done if one of the specified strings matches the left-hand part of +# the path. The tag can be used to show relative paths in the file list. +# If left blank the directory from which doxygen is run is used as the +# path to strip. + +STRIP_FROM_PATH = + +# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of +# the path mentioned in the documentation of a class, which tells +# the reader which header file to include in order to use a class. +# If left blank only the name of the header file containing the class +# definition is used. Otherwise one should specify the include paths that +# are normally passed to the compiler using the -I flag. + +STRIP_FROM_INC_PATH = + +# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter +# (but less readable) file names. This can be useful is your file systems +# doesn't support long names like on DOS, Mac, or CD-ROM. + +SHORT_NAMES = NO + +# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen +# will interpret the first line (until the first dot) of a JavaDoc-style +# comment as the brief description. If set to NO, the JavaDoc +# comments will behave just like regular Qt-style comments +# (thus requiring an explicit @brief command for a brief description.) + +JAVADOC_AUTOBRIEF = NO + +# If the QT_AUTOBRIEF tag is set to YES then Doxygen will +# interpret the first line (until the first dot) of a Qt-style +# comment as the brief description. If set to NO, the comments +# will behave just like regular Qt-style comments (thus requiring +# an explicit \brief command for a brief description.) + +QT_AUTOBRIEF = NO + +# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen +# treat a multi-line C++ special comment block (i.e. a block of //! or /// +# comments) as a brief description. This used to be the default behaviour. +# The new default is to treat a multi-line C++ comment block as a detailed +# description. Set this tag to YES if you prefer the old behaviour instead. + +MULTILINE_CPP_IS_BRIEF = NO + +# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented +# member inherits the documentation from any documented member that it +# re-implements. + +INHERIT_DOCS = YES + +# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce +# a new page for each member. If set to NO, the documentation of a member will +# be part of the file/class/namespace that contains it. + +SEPARATE_MEMBER_PAGES = NO + +# The TAB_SIZE tag can be used to set the number of spaces in a tab. +# Doxygen uses this value to replace tabs by spaces in code fragments. + +TAB_SIZE = 4 + +# This tag can be used to specify a number of aliases that acts +# as commands in the documentation. An alias has the form "name=value". +# For example adding "sideeffect=\par Side Effects:\n" will allow you to +# put the command \sideeffect (or @sideeffect) in the documentation, which +# will result in a user-defined paragraph with heading "Side Effects:". +# You can put \n's in the value part of an alias to insert newlines. + +ALIASES = + +# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C +# sources only. Doxygen will then generate output that is more tailored for C. +# For instance, some of the names that are used will be different. The list +# of all members will be omitted, etc. + +OPTIMIZE_OUTPUT_FOR_C = NO + +# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java +# sources only. Doxygen will then generate output that is more tailored for +# Java. For instance, namespaces will be presented as packages, qualified +# scopes will look different, etc. + +OPTIMIZE_OUTPUT_JAVA = NO + +# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran +# sources only. Doxygen will then generate output that is more tailored for +# Fortran. + +OPTIMIZE_FOR_FORTRAN = NO + +# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL +# sources. Doxygen will then generate output that is tailored for +# VHDL. + +OPTIMIZE_OUTPUT_VHDL = NO + +# Doxygen selects the parser to use depending on the extension of the files it +# parses. With this tag you can assign which parser to use for a given extension. +# Doxygen has a built-in mapping, but you can override or extend it using this +# tag. The format is ext=language, where ext is a file extension, and language +# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C, +# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make +# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C +# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions +# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen. + +EXTENSION_MAPPING = + +# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want +# to include (a tag file for) the STL sources as input, then you should +# set this tag to YES in order to let doxygen match functions declarations and +# definitions whose arguments contain STL classes (e.g. func(std::string); v.s. +# func(std::string) {}). This also make the inheritance and collaboration +# diagrams that involve STL classes more complete and accurate. + +BUILTIN_STL_SUPPORT = YES + +# If you use Microsoft's C++/CLI language, you should set this option to YES to +# enable parsing support. + +CPP_CLI_SUPPORT = NO + +# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only. +# Doxygen will parse them like normal C++ but will assume all classes use public +# instead of private inheritance when no explicit protection keyword is present. + +SIP_SUPPORT = NO + +# For Microsoft's IDL there are propget and propput attributes to indicate getter +# and setter methods for a property. Setting this option to YES (the default) +# will make doxygen to replace the get and set methods by a property in the +# documentation. This will only work if the methods are indeed getting or +# setting a simple type. If this is not the case, or you want to show the +# methods anyway, you should set this option to NO. + +IDL_PROPERTY_SUPPORT = YES + +# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC +# tag is set to YES, then doxygen will reuse the documentation of the first +# member in the group (if any) for the other members of the group. By default +# all members of a group must be documented explicitly. + +DISTRIBUTE_GROUP_DOC = NO + +# Set the SUBGROUPING tag to YES (the default) to allow class member groups of +# the same type (for instance a group of public functions) to be put as a +# subgroup of that type (e.g. under the Public Functions section). Set it to +# NO to prevent subgrouping. Alternatively, this can be done per class using +# the \nosubgrouping command. + +SUBGROUPING = YES + +# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum +# is documented as struct, union, or enum with the name of the typedef. So +# typedef struct TypeS {} TypeT, will appear in the documentation as a struct +# with name TypeT. When disabled the typedef will appear as a member of a file, +# namespace, or class. And the struct will be named TypeS. This can typically +# be useful for C code in case the coding convention dictates that all compound +# types are typedef'ed and only the typedef is referenced, never the tag name. + +TYPEDEF_HIDES_STRUCT = NO + +# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to +# determine which symbols to keep in memory and which to flush to disk. +# When the cache is full, less often used symbols will be written to disk. +# For small to medium size projects (<1000 input files) the default value is +# probably good enough. For larger projects a too small cache size can cause +# doxygen to be busy swapping symbols to and from disk most of the time +# causing a significant performance penality. +# If the system has enough physical memory increasing the cache will improve the +# performance by keeping more symbols in memory. Note that the value works on +# a logarithmic scale so increasing the size by one will rougly double the +# memory usage. The cache size is given by this formula: +# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, +# corresponding to a cache size of 2^16 = 65536 symbols + +SYMBOL_CACHE_SIZE = 0 + +#--------------------------------------------------------------------------- +# Build related configuration options +#--------------------------------------------------------------------------- + +# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in +# documentation are documented, even if no documentation was available. +# Private class members and static file members will be hidden unless +# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES + +EXTRACT_ALL = NO + +# If the EXTRACT_PRIVATE tag is set to YES all private members of a class +# will be included in the documentation. + +EXTRACT_PRIVATE = NO + +# If the EXTRACT_STATIC tag is set to YES all static members of a file +# will be included in the documentation. + +EXTRACT_STATIC = NO + +# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) +# defined locally in source files will be included in the documentation. +# If set to NO only classes defined in header files are included. + +EXTRACT_LOCAL_CLASSES = YES + +# This flag is only useful for Objective-C code. When set to YES local +# methods, which are defined in the implementation section but not in +# the interface are included in the documentation. +# If set to NO (the default) only methods in the interface are included. + +EXTRACT_LOCAL_METHODS = NO + +# If this flag is set to YES, the members of anonymous namespaces will be +# extracted and appear in the documentation as a namespace called +# 'anonymous_namespace{file}', where file will be replaced with the base +# name of the file that contains the anonymous namespace. By default +# anonymous namespace are hidden. + +EXTRACT_ANON_NSPACES = NO + +# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all +# undocumented members of documented classes, files or namespaces. +# If set to NO (the default) these members will be included in the +# various overviews, but no documentation section is generated. +# This option has no effect if EXTRACT_ALL is enabled. + +HIDE_UNDOC_MEMBERS = NO + +# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all +# undocumented classes that are normally visible in the class hierarchy. +# If set to NO (the default) these classes will be included in the various +# overviews. This option has no effect if EXTRACT_ALL is enabled. + +HIDE_UNDOC_CLASSES = NO + +# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all +# friend (class|struct|union) declarations. +# If set to NO (the default) these declarations will be included in the +# documentation. + +HIDE_FRIEND_COMPOUNDS = NO + +# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any +# documentation blocks found inside the body of a function. +# If set to NO (the default) these blocks will be appended to the +# function's detailed documentation block. + +HIDE_IN_BODY_DOCS = NO + +# The INTERNAL_DOCS tag determines if documentation +# that is typed after a \internal command is included. If the tag is set +# to NO (the default) then the documentation will be excluded. +# Set it to YES to include the internal documentation. + +INTERNAL_DOCS = NO + +# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate +# file names in lower-case letters. If set to YES upper-case letters are also +# allowed. This is useful if you have classes or files whose names only differ +# in case and if your file system supports case sensitive file names. Windows +# and Mac users are advised to set this option to NO. + +CASE_SENSE_NAMES = NO + +# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen +# will show members with their full class and namespace scopes in the +# documentation. If set to YES the scope will be hidden. + +HIDE_SCOPE_NAMES = NO + +# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen +# will put a list of the files that are included by a file in the documentation +# of that file. + +SHOW_INCLUDE_FILES = YES + +# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen +# will list include files with double quotes in the documentation +# rather than with sharp brackets. + +FORCE_LOCAL_INCLUDES = NO + +# If the INLINE_INFO tag is set to YES (the default) then a tag [inline] +# is inserted in the documentation for inline members. + +INLINE_INFO = YES + +# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen +# will sort the (detailed) documentation of file and class members +# alphabetically by member name. If set to NO the members will appear in +# declaration order. + +SORT_MEMBER_DOCS = YES + +# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the +# brief documentation of file, namespace and class members alphabetically +# by member name. If set to NO (the default) the members will appear in +# declaration order. + +SORT_BRIEF_DOCS = NO + +# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen +# will sort the (brief and detailed) documentation of class members so that +# constructors and destructors are listed first. If set to NO (the default) +# the constructors will appear in the respective orders defined by +# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS. +# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO +# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO. + +SORT_MEMBERS_CTORS_1ST = NO + +# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the +# hierarchy of group names into alphabetical order. If set to NO (the default) +# the group names will appear in their defined order. + +SORT_GROUP_NAMES = NO + +# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be +# sorted by fully-qualified names, including namespaces. If set to +# NO (the default), the class list will be sorted only by class name, +# not including the namespace part. +# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES. +# Note: This option applies only to the class list, not to the +# alphabetical list. + +SORT_BY_SCOPE_NAME = NO + +# The GENERATE_TODOLIST tag can be used to enable (YES) or +# disable (NO) the todo list. This list is created by putting \todo +# commands in the documentation. + +GENERATE_TODOLIST = YES + +# The GENERATE_TESTLIST tag can be used to enable (YES) or +# disable (NO) the test list. This list is created by putting \test +# commands in the documentation. + +GENERATE_TESTLIST = YES + +# The GENERATE_BUGLIST tag can be used to enable (YES) or +# disable (NO) the bug list. This list is created by putting \bug +# commands in the documentation. + +GENERATE_BUGLIST = YES + +# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or +# disable (NO) the deprecated list. This list is created by putting +# \deprecated commands in the documentation. + +GENERATE_DEPRECATEDLIST= YES + +# The ENABLED_SECTIONS tag can be used to enable conditional +# documentation sections, marked by \if sectionname ... \endif. + +ENABLED_SECTIONS = + +# The MAX_INITIALIZER_LINES tag determines the maximum number of lines +# the initial value of a variable or define consists of for it to appear in +# the documentation. If the initializer consists of more lines than specified +# here it will be hidden. Use a value of 0 to hide initializers completely. +# The appearance of the initializer of individual variables and defines in the +# documentation can be controlled using \showinitializer or \hideinitializer +# command in the documentation regardless of this setting. + +MAX_INITIALIZER_LINES = 30 + +# Set the SHOW_USED_FILES tag to NO to disable the list of files generated +# at the bottom of the documentation of classes and structs. If set to YES the +# list will mention the files that were used to generate the documentation. + +SHOW_USED_FILES = YES + +# If the sources in your project are distributed over multiple directories +# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy +# in the documentation. The default is NO. + +SHOW_DIRECTORIES = NO + +# Set the SHOW_FILES tag to NO to disable the generation of the Files page. +# This will remove the Files entry from the Quick Index and from the +# Folder Tree View (if specified). The default is YES. + +SHOW_FILES = YES + +# Set the SHOW_NAMESPACES tag to NO to disable the generation of the +# Namespaces page. This will remove the Namespaces entry from the Quick Index +# and from the Folder Tree View (if specified). The default is YES. + +SHOW_NAMESPACES = YES + +# The FILE_VERSION_FILTER tag can be used to specify a program or script that +# doxygen should invoke to get the current version for each file (typically from +# the version control system). Doxygen will invoke the program by executing (via +# popen()) the command , where is the value of +# the FILE_VERSION_FILTER tag, and is the name of an input file +# provided by doxygen. Whatever the program writes to standard output +# is used as the file version. See the manual for examples. + +FILE_VERSION_FILTER = + +# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed +# by doxygen. The layout file controls the global structure of the generated +# output files in an output format independent way. The create the layout file +# that represents doxygen's defaults, run doxygen with the -l option. +# You can optionally specify a file name after the option, if omitted +# DoxygenLayout.xml will be used as the name of the layout file. + +LAYOUT_FILE = + +#--------------------------------------------------------------------------- +# configuration options related to warning and progress messages +#--------------------------------------------------------------------------- + +# The QUIET tag can be used to turn on/off the messages that are generated +# by doxygen. Possible values are YES and NO. If left blank NO is used. + +QUIET = NO + +# The WARNINGS tag can be used to turn on/off the warning messages that are +# generated by doxygen. Possible values are YES and NO. If left blank +# NO is used. + +WARNINGS = YES + +# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings +# for undocumented members. If EXTRACT_ALL is set to YES then this flag will +# automatically be disabled. + +WARN_IF_UNDOCUMENTED = YES + +# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for +# potential errors in the documentation, such as not documenting some +# parameters in a documented function, or documenting parameters that +# don't exist or using markup commands wrongly. + +WARN_IF_DOC_ERROR = YES + +# This WARN_NO_PARAMDOC option can be abled to get warnings for +# functions that are documented, but have no documentation for their parameters +# or return value. If set to NO (the default) doxygen will only warn about +# wrong or incomplete parameter documentation, but not about the absence of +# documentation. + +WARN_NO_PARAMDOC = NO + +# The WARN_FORMAT tag determines the format of the warning messages that +# doxygen can produce. The string should contain the $file, $line, and $text +# tags, which will be replaced by the file and line number from which the +# warning originated and the warning text. Optionally the format may contain +# $version, which will be replaced by the version of the file (if it could +# be obtained via FILE_VERSION_FILTER) + +WARN_FORMAT = "$file:$line: $text" + +# The WARN_LOGFILE tag can be used to specify a file to which warning +# and error messages should be written. If left blank the output is written +# to stderr. + +WARN_LOGFILE = + +#--------------------------------------------------------------------------- +# configuration options related to the input files +#--------------------------------------------------------------------------- + +# The INPUT tag can be used to specify the files and/or directories that contain +# documented source files. You may enter file names like "myfile.cpp" or +# directories like "/usr/src/myproject". Separate the files or directories +# with spaces. + +INPUT = @top_srcdir@/zipper.hh + +# This tag can be used to specify the character encoding of the source files +# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is +# also the default input encoding. Doxygen uses libiconv (or the iconv built +# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for +# the list of possible encodings. + +INPUT_ENCODING = UTF-8 + +# If the value of the INPUT tag contains directories, you can use the +# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp +# and *.h) to filter out the source-files in the directories. If left +# blank the following patterns are tested: +# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx +# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90 + +FILE_PATTERNS = *.c \ + *.cc \ + *.cxx \ + *.cpp \ + *.c++ \ + *.d \ + *.java \ + *.ii \ + *.ixx \ + *.ipp \ + *.i++ \ + *.inl \ + *.h \ + *.hh \ + *.hxx \ + *.hpp \ + *.h++ \ + *.idl \ + *.odl \ + *.cs \ + *.php \ + *.php3 \ + *.inc \ + *.m \ + *.mm \ + *.dox \ + *.py \ + *.f90 \ + *.f \ + *.vhd \ + *.vhdl + +# The RECURSIVE tag can be used to turn specify whether or not subdirectories +# should be searched for input files as well. Possible values are YES and NO. +# If left blank NO is used. + +RECURSIVE = NO + +# The EXCLUDE tag can be used to specify files and/or directories that should +# excluded from the INPUT source files. This way you can easily exclude a +# subdirectory from a directory tree whose root is specified with the INPUT tag. + +EXCLUDE = + +# The EXCLUDE_SYMLINKS tag can be used select whether or not files or +# directories that are symbolic links (a Unix filesystem feature) are excluded +# from the input. + +EXCLUDE_SYMLINKS = NO + +# If the value of the INPUT tag contains directories, you can use the +# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude +# certain files from those directories. Note that the wildcards are matched +# against the file with absolute path, so to exclude all test directories +# for example use the pattern */test/* + +EXCLUDE_PATTERNS = + +# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names +# (namespaces, classes, functions, etc.) that should be excluded from the +# output. The symbol name can be a fully qualified name, a word, or if the +# wildcard * is used, a substring. Examples: ANamespace, AClass, +# AClass::ANamespace, ANamespace::*Test + +EXCLUDE_SYMBOLS = + +# The EXAMPLE_PATH tag can be used to specify one or more files or +# directories that contain example code fragments that are included (see +# the \include command). + +EXAMPLE_PATH = + +# If the value of the EXAMPLE_PATH tag contains directories, you can use the +# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp +# and *.h) to filter out the source-files in the directories. If left +# blank all files are included. + +EXAMPLE_PATTERNS = * + +# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be +# searched for input files to be used with the \include or \dontinclude +# commands irrespective of the value of the RECURSIVE tag. +# Possible values are YES and NO. If left blank NO is used. + +EXAMPLE_RECURSIVE = NO + +# The IMAGE_PATH tag can be used to specify one or more files or +# directories that contain image that are included in the documentation (see +# the \image command). + +IMAGE_PATH = + +# The INPUT_FILTER tag can be used to specify a program that doxygen should +# invoke to filter for each input file. Doxygen will invoke the filter program +# by executing (via popen()) the command , where +# is the value of the INPUT_FILTER tag, and is the name of an +# input file. Doxygen will then use the output that the filter program writes +# to standard output. If FILTER_PATTERNS is specified, this tag will be +# ignored. + +INPUT_FILTER = + +# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern +# basis. Doxygen will compare the file name with each pattern and apply the +# filter if there is a match. The filters are a list of the form: +# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further +# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER +# is applied to all files. + +FILTER_PATTERNS = + +# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using +# INPUT_FILTER) will be used to filter the input files when producing source +# files to browse (i.e. when SOURCE_BROWSER is set to YES). + +FILTER_SOURCE_FILES = NO + +#--------------------------------------------------------------------------- +# configuration options related to source browsing +#--------------------------------------------------------------------------- + +# If the SOURCE_BROWSER tag is set to YES then a list of source files will +# be generated. Documented entities will be cross-referenced with these sources. +# Note: To get rid of all source code in the generated output, make sure also +# VERBATIM_HEADERS is set to NO. + +SOURCE_BROWSER = YES + +# Setting the INLINE_SOURCES tag to YES will include the body +# of functions and classes directly in the documentation. + +INLINE_SOURCES = NO + +# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct +# doxygen to hide any special comment blocks from generated source code +# fragments. Normal C and C++ comments will always remain visible. + +STRIP_CODE_COMMENTS = YES + +# If the REFERENCED_BY_RELATION tag is set to YES +# then for each documented function all documented +# functions referencing it will be listed. + +REFERENCED_BY_RELATION = NO + +# If the REFERENCES_RELATION tag is set to YES +# then for each documented function all documented entities +# called/used by that function will be listed. + +REFERENCES_RELATION = NO + +# If the REFERENCES_LINK_SOURCE tag is set to YES (the default) +# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from +# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will +# link to the source code. Otherwise they will link to the documentation. + +REFERENCES_LINK_SOURCE = YES + +# If the USE_HTAGS tag is set to YES then the references to source code +# will point to the HTML generated by the htags(1) tool instead of doxygen +# built-in source browser. The htags tool is part of GNU's global source +# tagging system (see http://www.gnu.org/software/global/global.html). You +# will need version 4.8.6 or higher. + +USE_HTAGS = NO + +# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen +# will generate a verbatim copy of the header file for each class for +# which an include is specified. Set to NO to disable this. + +VERBATIM_HEADERS = YES + +#--------------------------------------------------------------------------- +# configuration options related to the alphabetical class index +#--------------------------------------------------------------------------- + +# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index +# of all compounds will be generated. Enable this if the project +# contains a lot of classes, structs, unions or interfaces. + +ALPHABETICAL_INDEX = YES + +# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then +# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns +# in which this list will be split (can be a number in the range [1..20]) + +COLS_IN_ALPHA_INDEX = 5 + +# In case all classes in a project start with a common prefix, all +# classes will be put under the same header in the alphabetical index. +# The IGNORE_PREFIX tag can be used to specify one or more prefixes that +# should be ignored while generating the index headers. + +IGNORE_PREFIX = + +#--------------------------------------------------------------------------- +# configuration options related to the HTML output +#--------------------------------------------------------------------------- + +# If the GENERATE_HTML tag is set to YES (the default) Doxygen will +# generate HTML output. + +GENERATE_HTML = YES + +# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `html' will be used as the default path. + +HTML_OUTPUT = html + +# The HTML_FILE_EXTENSION tag can be used to specify the file extension for +# each generated HTML page (for example: .htm,.php,.asp). If it is left blank +# doxygen will generate files with .html extension. + +HTML_FILE_EXTENSION = .html + +# The HTML_HEADER tag can be used to specify a personal HTML header for +# each generated HTML page. If it is left blank doxygen will generate a +# standard header. + +HTML_HEADER = + +# The HTML_FOOTER tag can be used to specify a personal HTML footer for +# each generated HTML page. If it is left blank doxygen will generate a +# standard footer. + +HTML_FOOTER = + +# The HTML_STYLESHEET tag can be used to specify a user-defined cascading +# style sheet that is used by each HTML page. It can be used to +# fine-tune the look of the HTML output. If the tag is left blank doxygen +# will generate a default style sheet. Note that doxygen will try to copy +# the style sheet file to the HTML output directory, so don't put your own +# stylesheet in the HTML output directory as well, or it will be erased! + +HTML_STYLESHEET = + +# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. +# Doxygen will adjust the colors in the stylesheet and background images +# according to this color. Hue is specified as an angle on a colorwheel, +# see http://en.wikipedia.org/wiki/Hue for more information. +# For instance the value 0 represents red, 60 is yellow, 120 is green, +# 180 is cyan, 240 is blue, 300 purple, and 360 is red again. +# The allowed range is 0 to 359. + +HTML_COLORSTYLE_HUE = 220 + +# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of +# the colors in the HTML output. For a value of 0 the output will use +# grayscales only. A value of 255 will produce the most vivid colors. + +HTML_COLORSTYLE_SAT = 100 + +# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to +# the luminance component of the colors in the HTML output. Values below +# 100 gradually make the output lighter, whereas values above 100 make +# the output darker. The value divided by 100 is the actual gamma applied, +# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2, +# and 100 does not change the gamma. + +HTML_COLORSTYLE_GAMMA = 80 + +# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML +# page will contain the date and time when the page was generated. Setting +# this to NO can help when comparing the output of multiple runs. + +HTML_TIMESTAMP = YES + +# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, +# files or namespaces will be aligned in HTML using tables. If set to +# NO a bullet list will be used. + +HTML_ALIGN_MEMBERS = YES + +# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML +# documentation will contain sections that can be hidden and shown after the +# page has loaded. For this to work a browser that supports +# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox +# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). + +HTML_DYNAMIC_SECTIONS = NO + +# If the GENERATE_DOCSET tag is set to YES, additional index files +# will be generated that can be used as input for Apple's Xcode 3 +# integrated development environment, introduced with OSX 10.5 (Leopard). +# To create a documentation set, doxygen will generate a Makefile in the +# HTML output directory. Running make will produce the docset in that +# directory and running "make install" will install the docset in +# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find +# it at startup. +# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html +# for more information. + +GENERATE_DOCSET = NO + +# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the +# feed. A documentation feed provides an umbrella under which multiple +# documentation sets from a single provider (such as a company or product suite) +# can be grouped. + +DOCSET_FEEDNAME = "Doxygen generated docs" + +# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that +# should uniquely identify the documentation set bundle. This should be a +# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen +# will append .docset to the name. + +DOCSET_BUNDLE_ID = org.doxygen.Project + +# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify +# the documentation publisher. This should be a reverse domain-name style +# string, e.g. com.mycompany.MyDocSet.documentation. + +DOCSET_PUBLISHER_ID = org.doxygen.Publisher + +# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher. + +DOCSET_PUBLISHER_NAME = Publisher + +# If the GENERATE_HTMLHELP tag is set to YES, additional index files +# will be generated that can be used as input for tools like the +# Microsoft HTML help workshop to generate a compiled HTML help file (.chm) +# of the generated HTML documentation. + +GENERATE_HTMLHELP = YES + +# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can +# be used to specify the file name of the resulting .chm file. You +# can add a path in front of the file if the result should not be +# written to the html output directory. + +CHM_FILE = + +# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can +# be used to specify the location (absolute path including file name) of +# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run +# the HTML help compiler on the generated index.hhp. + +HHC_LOCATION = + +# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag +# controls if a separate .chi index file is generated (YES) or that +# it should be included in the master .chm file (NO). + +GENERATE_CHI = YES + +# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING +# is used to encode HtmlHelp index (hhk), content (hhc) and project file +# content. + +CHM_INDEX_ENCODING = + +# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag +# controls whether a binary table of contents is generated (YES) or a +# normal table of contents (NO) in the .chm file. + +BINARY_TOC = NO + +# The TOC_EXPAND flag can be set to YES to add extra items for group members +# to the contents of the HTML help documentation and to the tree view. + +TOC_EXPAND = NO + +# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and +# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated +# that can be used as input for Qt's qhelpgenerator to generate a +# Qt Compressed Help (.qch) of the generated HTML documentation. + +GENERATE_QHP = NO + +# If the QHG_LOCATION tag is specified, the QCH_FILE tag can +# be used to specify the file name of the resulting .qch file. +# The path specified is relative to the HTML output folder. + +QCH_FILE = + +# The QHP_NAMESPACE tag specifies the namespace to use when generating +# Qt Help Project output. For more information please see +# http://doc.trolltech.com/qthelpproject.html#namespace + +QHP_NAMESPACE = org.doxygen.Project + +# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating +# Qt Help Project output. For more information please see +# http://doc.trolltech.com/qthelpproject.html#virtual-folders + +QHP_VIRTUAL_FOLDER = doc + +# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to +# add. For more information please see +# http://doc.trolltech.com/qthelpproject.html#custom-filters + +QHP_CUST_FILTER_NAME = + +# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the +# custom filter to add. For more information please see +# +# Qt Help Project / Custom Filters. + +QHP_CUST_FILTER_ATTRS = + +# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this +# project's +# filter section matches. +# +# Qt Help Project / Filter Attributes. + +QHP_SECT_FILTER_ATTRS = + +# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can +# be used to specify the location of Qt's qhelpgenerator. +# If non-empty doxygen will try to run qhelpgenerator on the generated +# .qhp file. + +QHG_LOCATION = + +# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files +# will be generated, which together with the HTML files, form an Eclipse help +# plugin. To install this plugin and make it available under the help contents +# menu in Eclipse, the contents of the directory containing the HTML and XML +# files needs to be copied into the plugins directory of eclipse. The name of +# the directory within the plugins directory should be the same as +# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before +# the help appears. + +GENERATE_ECLIPSEHELP = NO + +# A unique identifier for the eclipse help plugin. When installing the plugin +# the directory name containing the HTML and XML files should also have +# this name. + +ECLIPSE_DOC_ID = org.doxygen.Project + +# The DISABLE_INDEX tag can be used to turn on/off the condensed index at +# top of each HTML page. The value NO (the default) enables the index and +# the value YES disables it. + +DISABLE_INDEX = NO + +# This tag can be used to set the number of enum values (range [1..20]) +# that doxygen will group on one line in the generated HTML documentation. + +ENUM_VALUES_PER_LINE = 4 + +# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index +# structure should be generated to display hierarchical information. +# If the tag value is set to YES, a side panel will be generated +# containing a tree-like index structure (just like the one that +# is generated for HTML Help). For this to work a browser that supports +# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser). +# Windows users are probably better off using the HTML help feature. + +GENERATE_TREEVIEW = NO + +# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories, +# and Class Hierarchy pages using a tree view instead of an ordered list. + +USE_INLINE_TREES = NO + +# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be +# used to set the initial width (in pixels) of the frame in which the tree +# is shown. + +TREEVIEW_WIDTH = 250 + +# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open +# links to external symbols imported via tag files in a separate window. + +EXT_LINKS_IN_WINDOW = NO + +# Use this tag to change the font size of Latex formulas included +# as images in the HTML documentation. The default is 10. Note that +# when you change the font size after a successful doxygen run you need +# to manually remove any form_*.png images from the HTML output directory +# to force them to be regenerated. + +FORMULA_FONTSIZE = 10 + +# Use the FORMULA_TRANPARENT tag to determine whether or not the images +# generated for formulas are transparent PNGs. Transparent PNGs are +# not supported properly for IE 6.0, but are supported on all modern browsers. +# Note that when changing this option you need to delete any form_*.png files +# in the HTML output before the changes have effect. + +FORMULA_TRANSPARENT = YES + +# When the SEARCHENGINE tag is enabled doxygen will generate a search box +# for the HTML output. The underlying search engine uses javascript +# and DHTML and should work on any modern browser. Note that when using +# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets +# (GENERATE_DOCSET) there is already a search function so this one should +# typically be disabled. For large projects the javascript based search engine +# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution. + +SEARCHENGINE = NO + +# When the SERVER_BASED_SEARCH tag is enabled the search engine will be +# implemented using a PHP enabled web server instead of at the web client +# using Javascript. Doxygen will generate the search PHP script and index +# file to put on the web server. The advantage of the server +# based approach is that it scales better to large projects and allows +# full text search. The disadvances is that it is more difficult to setup +# and does not have live searching capabilities. + +SERVER_BASED_SEARCH = NO + +#--------------------------------------------------------------------------- +# configuration options related to the LaTeX output +#--------------------------------------------------------------------------- + +# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will +# generate Latex output. + +GENERATE_LATEX = YES + +# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `latex' will be used as the default path. + +LATEX_OUTPUT = latex + +# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be +# invoked. If left blank `latex' will be used as the default command name. +# Note that when enabling USE_PDFLATEX this option is only used for +# generating bitmaps for formulas in the HTML output, but not in the +# Makefile that is written to the output directory. + +LATEX_CMD_NAME = latex + +# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to +# generate index for LaTeX. If left blank `makeindex' will be used as the +# default command name. + +MAKEINDEX_CMD_NAME = makeindex + +# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact +# LaTeX documents. This may be useful for small projects and may help to +# save some trees in general. + +COMPACT_LATEX = NO + +# The PAPER_TYPE tag can be used to set the paper type that is used +# by the printer. Possible values are: a4, a4wide, letter, legal and +# executive. If left blank a4wide will be used. + +PAPER_TYPE = a4wide + +# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX +# packages that should be included in the LaTeX output. + +EXTRA_PACKAGES = + +# The LATEX_HEADER tag can be used to specify a personal LaTeX header for +# the generated latex document. The header should contain everything until +# the first chapter. If it is left blank doxygen will generate a +# standard header. Notice: only use this tag if you know what you are doing! + +LATEX_HEADER = + +# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated +# is prepared for conversion to pdf (using ps2pdf). The pdf file will +# contain links (just like the HTML output) instead of page references +# This makes the output suitable for online browsing using a pdf viewer. + +PDF_HYPERLINKS = YES + +# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of +# plain latex in the generated Makefile. Set this option to YES to get a +# higher quality PDF documentation. + +USE_PDFLATEX = YES + +# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode. +# command to the generated LaTeX files. This will instruct LaTeX to keep +# running if errors occur, instead of asking the user for help. +# This option is also used when generating formulas in HTML. + +LATEX_BATCHMODE = NO + +# If LATEX_HIDE_INDICES is set to YES then doxygen will not +# include the index chapters (such as File Index, Compound Index, etc.) +# in the output. + +LATEX_HIDE_INDICES = NO + +# If LATEX_SOURCE_CODE is set to YES then doxygen will include +# source code with syntax highlighting in the LaTeX output. +# Note that which sources are shown also depends on other settings +# such as SOURCE_BROWSER. + +LATEX_SOURCE_CODE = NO + +#--------------------------------------------------------------------------- +# configuration options related to the RTF output +#--------------------------------------------------------------------------- + +# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output +# The RTF output is optimized for Word 97 and may not look very pretty with +# other RTF readers or editors. + +GENERATE_RTF = YES + +# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `rtf' will be used as the default path. + +RTF_OUTPUT = rtf + +# If the COMPACT_RTF tag is set to YES Doxygen generates more compact +# RTF documents. This may be useful for small projects and may help to +# save some trees in general. + +COMPACT_RTF = NO + +# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated +# will contain hyperlink fields. The RTF file will +# contain links (just like the HTML output) instead of page references. +# This makes the output suitable for online browsing using WORD or other +# programs which support those fields. +# Note: wordpad (write) and others do not support links. + +RTF_HYPERLINKS = NO + +# Load stylesheet definitions from file. Syntax is similar to doxygen's +# config file, i.e. a series of assignments. You only have to provide +# replacements, missing definitions are set to their default value. + +RTF_STYLESHEET_FILE = + +# Set optional variables used in the generation of an rtf document. +# Syntax is similar to doxygen's config file. + +RTF_EXTENSIONS_FILE = + +#--------------------------------------------------------------------------- +# configuration options related to the man page output +#--------------------------------------------------------------------------- + +# If the GENERATE_MAN tag is set to YES (the default) Doxygen will +# generate man pages + +GENERATE_MAN = YES + +# The MAN_OUTPUT tag is used to specify where the man pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `man' will be used as the default path. + +MAN_OUTPUT = man + +# The MAN_EXTENSION tag determines the extension that is added to +# the generated man pages (default is the subroutine's section .3) + +MAN_EXTENSION = .3 + +# If the MAN_LINKS tag is set to YES and Doxygen generates man output, +# then it will generate one additional man file for each entity +# documented in the real man page(s). These additional files +# only source the real man page, but without them the man command +# would be unable to find the correct page. The default is NO. + +MAN_LINKS = NO + +#--------------------------------------------------------------------------- +# configuration options related to the XML output +#--------------------------------------------------------------------------- + +# If the GENERATE_XML tag is set to YES Doxygen will +# generate an XML file that captures the structure of +# the code including all documentation. + +GENERATE_XML = YES + +# The XML_OUTPUT tag is used to specify where the XML pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `xml' will be used as the default path. + +XML_OUTPUT = xml + +# The XML_SCHEMA tag can be used to specify an XML schema, +# which can be used by a validating XML parser to check the +# syntax of the XML files. + +XML_SCHEMA = + +# The XML_DTD tag can be used to specify an XML DTD, +# which can be used by a validating XML parser to check the +# syntax of the XML files. + +XML_DTD = + +# If the XML_PROGRAMLISTING tag is set to YES Doxygen will +# dump the program listings (including syntax highlighting +# and cross-referencing information) to the XML output. Note that +# enabling this will significantly increase the size of the XML output. + +XML_PROGRAMLISTING = YES + +#--------------------------------------------------------------------------- +# configuration options for the AutoGen Definitions output +#--------------------------------------------------------------------------- + +# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will +# generate an AutoGen Definitions (see autogen.sf.net) file +# that captures the structure of the code including all +# documentation. Note that this feature is still experimental +# and incomplete at the moment. + +GENERATE_AUTOGEN_DEF = NO + +#--------------------------------------------------------------------------- +# configuration options related to the Perl module output +#--------------------------------------------------------------------------- + +# If the GENERATE_PERLMOD tag is set to YES Doxygen will +# generate a Perl module file that captures the structure of +# the code including all documentation. Note that this +# feature is still experimental and incomplete at the +# moment. + +GENERATE_PERLMOD = NO + +# If the PERLMOD_LATEX tag is set to YES Doxygen will generate +# the necessary Makefile rules, Perl scripts and LaTeX code to be able +# to generate PDF and DVI output from the Perl module output. + +PERLMOD_LATEX = NO + +# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be +# nicely formatted so it can be parsed by a human reader. This is useful +# if you want to understand what is going on. On the other hand, if this +# tag is set to NO the size of the Perl module output will be much smaller +# and Perl will parse it just the same. + +PERLMOD_PRETTY = YES + +# The names of the make variables in the generated doxyrules.make file +# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. +# This is useful so different doxyrules.make files included by the same +# Makefile don't overwrite each other's variables. + +PERLMOD_MAKEVAR_PREFIX = + +#--------------------------------------------------------------------------- +# Configuration options related to the preprocessor +#--------------------------------------------------------------------------- + +# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will +# evaluate all C-preprocessor directives found in the sources and include +# files. + +ENABLE_PREPROCESSING = YES + +# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro +# names in the source code. If set to NO (the default) only conditional +# compilation will be performed. Macro expansion can be done in a controlled +# way by setting EXPAND_ONLY_PREDEF to YES. + +MACRO_EXPANSION = NO + +# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES +# then the macro expansion is limited to the macros specified with the +# PREDEFINED and EXPAND_AS_DEFINED tags. + +EXPAND_ONLY_PREDEF = NO + +# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files +# in the INCLUDE_PATH (see below) will be search if a #include is found. + +SEARCH_INCLUDES = YES + +# The INCLUDE_PATH tag can be used to specify one or more directories that +# contain include files that are not input files but should be processed by +# the preprocessor. + +INCLUDE_PATH = + +# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard +# patterns (like *.h and *.hpp) to filter out the header-files in the +# directories. If left blank, the patterns specified with FILE_PATTERNS will +# be used. + +INCLUDE_FILE_PATTERNS = + +# The PREDEFINED tag can be used to specify one or more macro names that +# are defined before the preprocessor is started (similar to the -D option of +# gcc). The argument of the tag is a list of macros of the form: name +# or name=definition (no spaces). If the definition and the = are +# omitted =1 is assumed. To prevent a macro definition from being +# undefined via #undef or recursively expanded use the := operator +# instead of the = operator. + +PREDEFINED = + +# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then +# this tag can be used to specify a list of macro names that should be expanded. +# The macro definition that is found in the sources will be used. +# Use the PREDEFINED tag if you want to use a different macro definition. + +EXPAND_AS_DEFINED = + +# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then +# doxygen's preprocessor will remove all function-like macros that are alone +# on a line, have an all uppercase name, and do not end with a semicolon. Such +# function macros are typically used for boiler-plate code, and will confuse +# the parser if not removed. + +SKIP_FUNCTION_MACROS = YES + +#--------------------------------------------------------------------------- +# Configuration::additions related to external references +#--------------------------------------------------------------------------- + +# The TAGFILES option can be used to specify one or more tagfiles. +# Optionally an initial location of the external documentation +# can be added for each tagfile. The format of a tag file without +# this location is as follows: +# TAGFILES = file1 file2 ... +# Adding location for the tag files is done as follows: +# TAGFILES = file1=loc1 "file2 = loc2" ... +# where "loc1" and "loc2" can be relative or absolute paths or +# URLs. If a location is present for each tag, the installdox tool +# does not have to be run to correct the links. +# Note that each tag file must have a unique name +# (where the name does NOT include the path) +# If a tag file is not located in the directory in which doxygen +# is run, you must also specify the path to the tagfile here. + +TAGFILES = + +# When a file name is specified after GENERATE_TAGFILE, doxygen will create +# a tag file that is based on the input files it reads. + +GENERATE_TAGFILE = + +# If the ALLEXTERNALS tag is set to YES all external classes will be listed +# in the class index. If set to NO only the inherited external classes +# will be listed. + +ALLEXTERNALS = NO + +# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed +# in the modules index. If set to NO, only the current project's groups will +# be listed. + +EXTERNAL_GROUPS = YES + +# The PERL_PATH should be the absolute path and name of the perl script +# interpreter (i.e. the result of `which perl'). + +PERL_PATH = /usr/bin/perl + +#--------------------------------------------------------------------------- +# Configuration options related to the dot tool +#--------------------------------------------------------------------------- + +# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will +# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base +# or super classes. Setting the tag to NO turns the diagrams off. Note that +# this option is superseded by the HAVE_DOT option below. This is only a +# fallback. It is recommended to install and use dot, since it yields more +# powerful graphs. + +CLASS_DIAGRAMS = YES + +# You can define message sequence charts within doxygen comments using the \msc +# command. Doxygen will then run the mscgen tool (see +# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the +# documentation. The MSCGEN_PATH tag allows you to specify the directory where +# the mscgen tool resides. If left empty the tool is assumed to be found in the +# default search path. + +MSCGEN_PATH = + +# If set to YES, the inheritance and collaboration graphs will hide +# inheritance and usage relations if the target is undocumented +# or is not a class. + +HIDE_UNDOC_RELATIONS = YES + +# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is +# available from the path. This tool is part of Graphviz, a graph visualization +# toolkit from AT&T and Lucent Bell Labs. The other options in this section +# have no effect if this option is set to NO (the default) + +HAVE_DOT = NO + +# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is +# allowed to run in parallel. When set to 0 (the default) doxygen will +# base this on the number of processors available in the system. You can set it +# explicitly to a value larger than 0 to get control over the balance +# between CPU load and processing speed. + +DOT_NUM_THREADS = 0 + +# By default doxygen will write a font called FreeSans.ttf to the output +# directory and reference it in all dot files that doxygen generates. This +# font does not include all possible unicode characters however, so when you need +# these (or just want a differently looking font) you can specify the font name +# using DOT_FONTNAME. You need need to make sure dot is able to find the font, +# which can be done by putting it in a standard location or by setting the +# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory +# containing the font. + +DOT_FONTNAME = FreeSans.ttf + +# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. +# The default size is 10pt. + +DOT_FONTSIZE = 10 + +# By default doxygen will tell dot to use the output directory to look for the +# FreeSans.ttf font (which doxygen will put there itself). If you specify a +# different font using DOT_FONTNAME you can set the path where dot +# can find it using this tag. + +DOT_FONTPATH = + +# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen +# will generate a graph for each documented class showing the direct and +# indirect inheritance relations. Setting this tag to YES will force the +# the CLASS_DIAGRAMS tag to NO. + +CLASS_GRAPH = YES + +# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen +# will generate a graph for each documented class showing the direct and +# indirect implementation dependencies (inheritance, containment, and +# class references variables) of the class with other documented classes. + +COLLABORATION_GRAPH = YES + +# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen +# will generate a graph for groups, showing the direct groups dependencies + +GROUP_GRAPHS = YES + +# If the UML_LOOK tag is set to YES doxygen will generate inheritance and +# collaboration diagrams in a style similar to the OMG's Unified Modeling +# Language. + +UML_LOOK = NO + +# If set to YES, the inheritance and collaboration graphs will show the +# relations between templates and their instances. + +TEMPLATE_RELATIONS = NO + +# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT +# tags are set to YES then doxygen will generate a graph for each documented +# file showing the direct and indirect include dependencies of the file with +# other documented files. + +INCLUDE_GRAPH = YES + +# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and +# HAVE_DOT tags are set to YES then doxygen will generate a graph for each +# documented header file showing the documented files that directly or +# indirectly include this file. + +INCLUDED_BY_GRAPH = YES + +# If the CALL_GRAPH and HAVE_DOT options are set to YES then +# doxygen will generate a call dependency graph for every global function +# or class method. Note that enabling this option will significantly increase +# the time of a run. So in most cases it will be better to enable call graphs +# for selected functions only using the \callgraph command. + +CALL_GRAPH = NO + +# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then +# doxygen will generate a caller dependency graph for every global function +# or class method. Note that enabling this option will significantly increase +# the time of a run. So in most cases it will be better to enable caller +# graphs for selected functions only using the \callergraph command. + +CALLER_GRAPH = NO + +# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen +# will graphical hierarchy of all classes instead of a textual one. + +GRAPHICAL_HIERARCHY = YES + +# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES +# then doxygen will show the dependencies a directory has on other directories +# in a graphical way. The dependency relations are determined by the #include +# relations between the files in the directories. + +DIRECTORY_GRAPH = YES + +# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images +# generated by dot. Possible values are png, jpg, or gif +# If left blank png will be used. + +DOT_IMAGE_FORMAT = png + +# The tag DOT_PATH can be used to specify the path where the dot tool can be +# found. If left blank, it is assumed the dot tool can be found in the path. + +DOT_PATH = + +# The DOTFILE_DIRS tag can be used to specify one or more directories that +# contain dot files that are included in the documentation (see the +# \dotfile command). + +DOTFILE_DIRS = + +# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of +# nodes that will be shown in the graph. If the number of nodes in a graph +# becomes larger than this value, doxygen will truncate the graph, which is +# visualized by representing a node as a red box. Note that doxygen if the +# number of direct children of the root node in a graph is already larger than +# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note +# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH. + +DOT_GRAPH_MAX_NODES = 50 + +# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the +# graphs generated by dot. A depth value of 3 means that only nodes reachable +# from the root by following a path via at most 3 edges will be shown. Nodes +# that lay further from the root node will be omitted. Note that setting this +# option to 1 or 2 may greatly reduce the computation time needed for large +# code bases. Also note that the size of a graph can be further restricted by +# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction. + +MAX_DOT_GRAPH_DEPTH = 0 + +# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent +# background. This is disabled by default, because dot on Windows does not +# seem to support this out of the box. Warning: Depending on the platform used, +# enabling this option may lead to badly anti-aliased labels on the edges of +# a graph (i.e. they become hard to read). + +DOT_TRANSPARENT = NO + +# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output +# files in one run (i.e. multiple -o and -T options on the command line). This +# makes dot run faster, but since only newer versions of dot (>1.8.10) +# support this, this feature is disabled by default. + +DOT_MULTI_TARGETS = NO + +# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will +# generate a legend page explaining the meaning of the various boxes and +# arrows in the dot generated graphs. + +GENERATE_LEGEND = YES + +# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will +# remove the intermediate dot files that are used to generate +# the various graphs. + +DOT_CLEANUP = YES diff --git a/software/scsi2sd-util/libzipper-1.0.3/Exception.cc b/software/scsi2sd-util/libzipper-1.0.3/Exception.cc new file mode 100644 index 0000000..a5cf59c --- /dev/null +++ b/software/scsi2sd-util/libzipper-1.0.3/Exception.cc @@ -0,0 +1,41 @@ +// Copyright (C) 2011 Michael McMaster +// +// This file is part of libzipper. +// +// libzipper is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// libzipper is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with libzipper. If not, see . + +#include "zipper.hh" + +using namespace zipper; + +Exception::Exception(const std::string& what) : + std::runtime_error(what) +{ +} + +FormatException::FormatException(const std::string& what) : + Exception(what) +{ +} + +UnsupportedException::UnsupportedException(const std::string& what) : + Exception(what) +{ +} + +IOException::IOException(const std::string& what) : + Exception(what) +{ +} + diff --git a/software/scsi2sd-util/libzipper-1.0.3/FileReader.cc b/software/scsi2sd-util/libzipper-1.0.3/FileReader.cc new file mode 100644 index 0000000..054c24e --- /dev/null +++ b/software/scsi2sd-util/libzipper-1.0.3/FileReader.cc @@ -0,0 +1,192 @@ +// Copyright (C) 2011 Michael McMaster +// +// This file is part of libzipper. +// +// libzipper is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// libzipper is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with libzipper. If not, see . + +#include "zipper.hh" +#include "strerror.hh" + +#include +#include + +#include +#include +#include +#include +#include + +using namespace zipper; + +const timeval zipper::s_now = {0,0}; + + +class FileReader::FileReaderImpl +{ +public: + FileReaderImpl(const std::string& filename) : + m_filename(filename), + m_fd(-1), + m_closeOnExit(true) + { + m_fd = ::open(filename.c_str(), O_RDONLY); + + if (m_fd < 0) + { + std::string errMsg(zipper::strerror(errno)); + + std::stringstream message; + message << "Could not open file \"" << filename << "\": " << + errMsg; + throw IOException(message.str()); + } + initStats(); + } + + FileReaderImpl(const std::string& filename, int fd, bool closeFd) : + m_filename(filename), + m_fd(fd), + m_closeOnExit(closeFd) + { + initStats(); + } + + ~FileReaderImpl() + { + close(); + } + + const std::string& getSourceName() const { return m_filename; } + const timeval& getModTime() const { return m_modTime; } + + zsize_t getSize() const { return m_size; } + + virtual void readData( + zsize_t offset, zsize_t bytes, uint8_t* dest + ) const + { + assert(m_fd >= 0); + + zsize_t bytesRead(0); + while(bytesRead < bytes) + { + ssize_t currentBytes( + pread( + m_fd, + dest + bytesRead, + bytes - bytesRead, + offset + bytesRead) + ); + + if (currentBytes > 0) + { + bytesRead += static_cast(currentBytes); + } + else if (currentBytes == 0) + { + throw FormatException("Unexpected end-of-file"); + } + else if ((currentBytes < 0) && (errno != EINTR)) + { + std::string errMsg(zipper::strerror(errno)); + throw IOException(errMsg); + } + } + } + +private: + void initStats() + { + // If we fail here, we need to essentially run the dtor manually. + // initStats is called from the constructors, and so the dtor will + // NOT run if an exception is thrown. + + struct stat buf; + int result(fstat(m_fd, &buf)); + if (result != 0) + { + int errnoLocal = errno; + close(); + + std::string errMsg(zipper::strerror(errnoLocal)); + + std::stringstream message; + message << "Could not get filesize for file " << + "\"" << m_filename << "\": " << errMsg; + throw IOException(message.str()); + } + else + { + m_size = buf.st_size; + m_modTime.tv_sec = buf.st_mtime; + m_modTime.tv_usec = 0; + } + } + + void close() + { + if ((m_fd >= 0) && m_closeOnExit) + { + ::close(m_fd); + m_fd = -1; + } + } + std::string m_filename; + int m_fd; + bool m_closeOnExit; + zsize_t m_size; + timeval m_modTime; +}; + +FileReader::FileReader(const std::string& filename) : + m_impl(new FileReaderImpl(filename)) +{ +} + +FileReader::FileReader(const std::string& filename, int fd, bool closeFd) : + m_impl(new FileReaderImpl(filename, fd, closeFd)) +{ +} + +FileReader::~FileReader() +{ + delete m_impl; +} + +const std::string& +FileReader::getSourceName() const +{ + return m_impl->getSourceName(); +} + +const timeval& +FileReader::getModTime() const +{ + return m_impl->getModTime(); +} + +zsize_t +FileReader::getSize() const +{ + return m_impl->getSize(); +} + +void +FileReader::readData( + zsize_t offset, zsize_t bytes, uint8_t* dest + ) const +{ + return m_impl->readData(offset, bytes, dest); +} + diff --git a/software/scsi2sd-util/libzipper-1.0.3/FileWriter.cc b/software/scsi2sd-util/libzipper-1.0.3/FileWriter.cc new file mode 100644 index 0000000..53e7de7 --- /dev/null +++ b/software/scsi2sd-util/libzipper-1.0.3/FileWriter.cc @@ -0,0 +1,176 @@ +// Copyright (C) 2011 Michael McMaster +// +// This file is part of libzipper. +// +// libzipper is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// libzipper is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with libzipper. If not, see . + +#include "zipper.hh" +#include "strerror.hh" + +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +using namespace zipper; + +class FileWriter::FileWriterImpl +{ +public: + FileWriterImpl( + const std::string& filename, + mode_t createPermissions, + const timeval& modTime + ) : + m_filename(filename), + m_modTime(modTime), + m_fd(-1), + m_closeOnExit(true), + m_setModTimeOnExit(true) + { + m_fd = + ::open( + filename.c_str(), + O_WRONLY | O_TRUNC | O_CREAT, + createPermissions); + + if (m_fd < 0) + { + std::string errMsg(zipper::strerror(errno)); + + std::stringstream message; + message << "Could not open file \"" << filename << "\": " << + errMsg; + throw IOException(message.str()); + } + } + + FileWriterImpl(const std::string& filename, int fd, bool closeFd) : + m_filename(filename), + m_fd(fd), + m_closeOnExit(closeFd), + m_setModTimeOnExit(false) + { + } + + ~FileWriterImpl() + { + close(); + + if (m_setModTimeOnExit) + { + struct timeval times[2]; + if (s_now.tv_sec == m_modTime.tv_sec) + { + gettimeofday(×[0], NULL); + times[1] = times[0]; + } + else + { + times[0] = m_modTime; + times[1] = m_modTime; + } + utimes(m_filename.c_str(), times); + } + } + + virtual void writeData( + zsize_t offset, zsize_t bytes, const uint8_t* data + ) const + { + assert(m_fd >= 0); + + zsize_t bytesWritten(0); + while(bytesWritten < bytes) + { + ssize_t currentBytes( + pwrite( + m_fd, + data + bytesWritten, + bytes - bytesWritten, + offset + bytesWritten) + ); + + if (currentBytes >= 0) + { + bytesWritten += static_cast(currentBytes); + } + else if ((currentBytes < 0) && (errno != EINTR)) + { + std::string errMsg(zipper::strerror(errno)); + throw IOException(errMsg); + } + } + } + + zsize_t getSize() const + { + assert(m_fd >= 0); + zsize_t result(lseek(m_fd, 0, SEEK_END)); + return result; + } + +private: + void close() + { + if ((m_fd >= 0) && m_closeOnExit) + { + ::close(m_fd); + m_fd = -1; + } + } + + std::string m_filename; + timeval m_modTime; + int m_fd; + bool m_closeOnExit; + bool m_setModTimeOnExit; +}; + +FileWriter::FileWriter( + const std::string& filename, + mode_t createPermissions, + const timeval& modTime) : + m_impl(new FileWriterImpl(filename, createPermissions, modTime)) +{ +} + +FileWriter::FileWriter(const std::string& filename, int fd, bool closeFd) : + m_impl(new FileWriterImpl(filename, fd, closeFd)) +{ +} + +FileWriter::~FileWriter() +{ + delete m_impl; +} + +void +FileWriter::writeData(zsize_t offset, zsize_t bytes, const uint8_t* data) +{ + m_impl->writeData(offset, bytes, data); +} + +zsize_t +FileWriter::getSize() const +{ + return m_impl->getSize(); +} + diff --git a/software/scsi2sd-util/libzipper-1.0.3/INSTALL b/software/scsi2sd-util/libzipper-1.0.3/INSTALL new file mode 100644 index 0000000..91ff44f --- /dev/null +++ b/software/scsi2sd-util/libzipper-1.0.3/INSTALL @@ -0,0 +1,49 @@ +libzipper +Michael McMaster + +* Refer to INSTALL.Android for Google Android NDK compilation information. + +Pre-Requisites + g++ (4.5.3) + make (GNU make 3.81) + zlib (1.2.3) + doxygen (1.7.4) + +Optional + automake (1.11), autoconf (2.68), libtool (2.4) + (Required if building from git) + + graphviz (2.26.3) (for dependency diagrams in the generated docs) + +When building from sources obtained from the git repository, the configure +script must be created first using the autoconf/automake/libtool packages. +The supplied autogen.sh script automates this process. + +*NOTE: it is not necessary to run the autogen.sh script when using a +source distribution release. ie. If you obtained the sources via +libzipper-major.minor.patch.tar.gz, do not run autogen.sh + + ./autogen.sh + +The configure script creates the makefiles specific to your host. eg. It +allows the paths to dependant packages to be specified. + + ./configure --prefix=/usr + +The --prefix option specifies the base installation directory, and defaults +to /usr/local (in which case, the library would be installed in /usr/local/lib, +and the zipper binary would be installed in /usr/local/bin). + +To obtain a complete listing of configure options, use the --help option. + + ./configure --help + +Once the configure script is run, the software can be compiled. + + make + +Now it's time to install the software. This step must be run by a user with +write access to the installation directory (/usr/local by default). + + make install + diff --git a/software/scsi2sd-util/libzipper-1.0.3/INSTALL.Android b/software/scsi2sd-util/libzipper-1.0.3/INSTALL.Android new file mode 100644 index 0000000..e72f196 --- /dev/null +++ b/software/scsi2sd-util/libzipper-1.0.3/INSTALL.Android @@ -0,0 +1,40 @@ +libzipper +Michael McMaster + +Pre-Requisites + Android NDK (tested with android-ndk-r6) + Existing Android project + +NDK Limitations + * Your Application.mk file must enable C++ exceptions with: + APP_CPPFLAGS := -fexceptions -frtti + Although the NDK supports exceptions as of r5, they are disabled by + default for backwards compatibility. + + * Your Application.mk file must specify a C++ STL implementation with + exception support. As of r6, only gnustl_static provides exception support. + APP_STL := gnustl_static + +Note that this port doesn't include any JNI interface code. It is expected that +libzipper will be called from other native code libraries, and not directly +from Java. + +Including libzipper in your NDK project: +1) Modify your Application.mk file to include the module, and + set APP_CPPFLAGS and APP_STL as stated under "NDK Limitations" above. + + APP_CPPFLAGS += -fexceptions -frtti + APP_STL := gnustl_static + APP_MODULES += zipper + +2) Modify your applications Android.mk file to import the libzipper module: + + LOCAL_STATIC_LIBRARIES += libzipper + $(call import-module,zipper) + +3) Set the NDK_MODULE_PATH variable to include the libzipper source directory + when calling ndk-build. + eg. If libzipper was extracted to /tmp/libzipper-1.0.3: + + cd /path/to/your/ndk/application + ndk-build NDK_MODULE_PATH="/tmp/libzipper-1.0.3/android" diff --git a/software/scsi2sd-util/libzipper-1.0.3/Makefile.am b/software/scsi2sd-util/libzipper-1.0.3/Makefile.am new file mode 100644 index 0000000..1127b2f --- /dev/null +++ b/software/scsi2sd-util/libzipper-1.0.3/Makefile.am @@ -0,0 +1,85 @@ +# Copyright (C) 2011 Michael McMaster +# +# This file is part of libzipper. +# +# libzipper is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# libzipper is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with libzipper. If not, see . + +include doxygen.am + +dist_noinst_SCRIPTS = \ + autogen.sh + +pkgconfigdir = $(libdir)/pkgconfig +pkgconfig_DATA = libzipper1.pc + +EXTRA_DIST = \ + COPYING \ + INSTALL \ + INSTALL.Android \ + NEWS \ + README \ + VERSION \ + android/zipper/Android.mk + + +lib_LTLIBRARIES = libzipper.la +libzipper_la_SOURCES = \ + Compressor.cc \ + CompressedFile.cc \ + Container.cc \ + Decompressor.cc \ + deflate.cc \ + deflate.hh \ + Exception.cc \ + FileReader.cc \ + FileWriter.cc \ + gzip.cc \ + gzip.hh \ + Reader.cc \ + split.hh \ + strerror.hh \ + util.hh \ + Writer.cc \ + zip.hh \ + zip.cc + +if HAVE_GNU_STRERROR +libzipper_la_SOURCES += \ + port/strerror_gnu.cc +else +libzipper_la_SOURCES += \ + port/strerror_posix.cc +endif + +# Public API headers go here, for installation to /usr/include +include_HEADERS = zipper.hh + +libzipper_la_LDFLAGS = ${ZLIB_LIBS} -version-info 1:0 +libzipper_la_CFLAGS = ${ZLIB_CFLAGS} + +bin_PROGRAMS = zipper +man_MANS = zipper.1 + +zipper_SOURCES = \ + zipper.cc + +zipper_LDADD = libzipper.la + +CXXFLAGS=-g -O2 -W -Wall -std=c++0x + +MOSTLYCLEANFILES=$(DX_CLEANFILES) + +install-data-local: doxygen-install +all-local: doxygen-doc + diff --git a/software/scsi2sd-util/libzipper-1.0.3/Makefile.in b/software/scsi2sd-util/libzipper-1.0.3/Makefile.in new file mode 100644 index 0000000..60718c3 --- /dev/null +++ b/software/scsi2sd-util/libzipper-1.0.3/Makefile.in @@ -0,0 +1,1110 @@ +# Makefile.in generated by automake 1.11.1 from Makefile.am. +# @configure_input@ + +# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, +# Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ + +# Copyright (C) 2011 Michael McMaster +# +# This file is part of libzipper. +# +# libzipper is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# libzipper is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with libzipper. If not, see . + + + + + +VPATH = @srcdir@ +pkgdatadir = $(datadir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +build_triplet = @build@ +host_triplet = @host@ +target_triplet = @target@ +DIST_COMMON = README $(am__configure_deps) $(dist_noinst_SCRIPTS) \ + $(include_HEADERS) $(srcdir)/Doxyfile.in $(srcdir)/Makefile.am \ + $(srcdir)/Makefile.in $(srcdir)/autoconfig.h.in \ + $(srcdir)/doxygen.am $(srcdir)/libzipper1.pc.in \ + $(srcdir)/zipper.1.in $(top_srcdir)/configure COPYING INSTALL \ + NEWS config.guess config.sub depcomp install-sh ltmain.sh \ + missing +@DX_COND_doc_TRUE@@DX_COND_html_TRUE@am__append_1 = doxygen-install-html +@DX_COND_chm_TRUE@@DX_COND_doc_TRUE@am__append_2 = doxygen-install-chm +@DX_COND_doc_TRUE@@DX_COND_man_TRUE@am__append_3 = doxygen-install-man +@DX_COND_doc_TRUE@@DX_COND_rtf_TRUE@am__append_4 = doxygen-install-rtf +@DX_COND_doc_TRUE@@DX_COND_xml_TRUE@am__append_5 = doxygen-install-xml +@DX_COND_doc_TRUE@@DX_COND_ps_TRUE@am__append_6 = doxygen-install-ps +@DX_COND_doc_TRUE@@DX_COND_pdf_TRUE@am__append_7 = doxygen-install-pdf +@DX_COND_doc_TRUE@@DX_COND_latex_TRUE@am__append_8 = doxygen-install-latex +@HAVE_GNU_STRERROR_TRUE@am__append_9 = \ +@HAVE_GNU_STRERROR_TRUE@ port/strerror_gnu.cc + +@HAVE_GNU_STRERROR_FALSE@am__append_10 = \ +@HAVE_GNU_STRERROR_FALSE@ port/strerror_posix.cc + +bin_PROGRAMS = zipper$(EXEEXT) +subdir = . +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/configure.ac +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ + configure.lineno config.status.lineno +mkinstalldirs = $(install_sh) -d +CONFIG_HEADER = autoconfig.h +CONFIG_CLEAN_FILES = Doxyfile libzipper1.pc zipper.1 +CONFIG_CLEAN_VPATH_FILES = +am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; +am__vpath_adj = case $$p in \ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; +am__install_max = 40 +am__nobase_strip_setup = \ + srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` +am__nobase_strip = \ + for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" +am__nobase_list = $(am__nobase_strip_setup); \ + for p in $$list; do echo "$$p $$p"; done | \ + sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ + $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ + if (++n[$$2] == $(am__install_max)) \ + { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ + END { for (dir in files) print dir, files[dir] }' +am__base_list = \ + sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ + sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' +am__installdirs = "$(DESTDIR)$(libdir)" "$(DESTDIR)$(bindir)" \ + "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(pkgconfigdir)" \ + "$(DESTDIR)$(includedir)" +LTLIBRARIES = $(lib_LTLIBRARIES) +libzipper_la_LIBADD = +am__libzipper_la_SOURCES_DIST = Compressor.cc CompressedFile.cc \ + Container.cc Decompressor.cc deflate.cc deflate.hh \ + Exception.cc FileReader.cc FileWriter.cc gzip.cc gzip.hh \ + Reader.cc split.hh strerror.hh util.hh Writer.cc zip.hh zip.cc \ + port/strerror_gnu.cc port/strerror_posix.cc +@HAVE_GNU_STRERROR_TRUE@am__objects_1 = strerror_gnu.lo +@HAVE_GNU_STRERROR_FALSE@am__objects_2 = strerror_posix.lo +am_libzipper_la_OBJECTS = Compressor.lo CompressedFile.lo Container.lo \ + Decompressor.lo deflate.lo Exception.lo FileReader.lo \ + FileWriter.lo gzip.lo Reader.lo Writer.lo zip.lo \ + $(am__objects_1) $(am__objects_2) +libzipper_la_OBJECTS = $(am_libzipper_la_OBJECTS) +libzipper_la_LINK = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) \ + $(LIBTOOLFLAGS) --mode=link $(CXXLD) $(AM_CXXFLAGS) \ + $(CXXFLAGS) $(libzipper_la_LDFLAGS) $(LDFLAGS) -o $@ +PROGRAMS = $(bin_PROGRAMS) +am_zipper_OBJECTS = zipper.$(OBJEXT) +zipper_OBJECTS = $(am_zipper_OBJECTS) +zipper_DEPENDENCIES = libzipper.la +SCRIPTS = $(dist_noinst_SCRIPTS) +DEFAULT_INCLUDES = -I.@am__isrc@ +depcomp = $(SHELL) $(top_srcdir)/depcomp +am__depfiles_maybe = depfiles +am__mv = mv -f +CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ + $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) +LTCXXCOMPILE = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ + --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ + $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) +CXXLD = $(CXX) +CXXLINK = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ + --mode=link $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) $(AM_LDFLAGS) \ + $(LDFLAGS) -o $@ +COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ + $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) +LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ + --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ + $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) +CCLD = $(CC) +LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ + --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \ + $(LDFLAGS) -o $@ +SOURCES = $(libzipper_la_SOURCES) $(zipper_SOURCES) +DIST_SOURCES = $(am__libzipper_la_SOURCES_DIST) $(zipper_SOURCES) +man1dir = $(mandir)/man1 +NROFF = nroff +MANS = $(man_MANS) +DATA = $(pkgconfig_DATA) +HEADERS = $(include_HEADERS) +ETAGS = etags +CTAGS = ctags +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +distdir = $(PACKAGE)-$(VERSION) +top_distdir = $(distdir) +am__remove_distdir = \ + { test ! -d "$(distdir)" \ + || { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ + && rm -fr "$(distdir)"; }; } +DIST_ARCHIVES = $(distdir).tar.gz +GZIP_ENV = --best +distuninstallcheck_listfiles = find . -type f -print +distcleancheck_listfiles = find . -type f -print +ACLOCAL = @ACLOCAL@ +AMTAR = @AMTAR@ +AR = @AR@ +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AWK = @AWK@ +CC = @CC@ +CCDEPMODE = @CCDEPMODE@ +CFLAGS = @CFLAGS@ +CPP = @CPP@ +CPPFLAGS = @CPPFLAGS@ +CXX = @CXX@ +CXXCPP = @CXXCPP@ +CXXDEPMODE = @CXXDEPMODE@ +CXXFLAGS = -g -O2 -W -Wall -std=c++0x +CYGPATH_W = @CYGPATH_W@ +DEFS = @DEFS@ +DEPDIR = @DEPDIR@ +DLLTOOL = @DLLTOOL@ +DOXYGEN_PAPER_SIZE = @DOXYGEN_PAPER_SIZE@ +DSYMUTIL = @DSYMUTIL@ +DUMPBIN = @DUMPBIN@ +DX_CONFIG = @DX_CONFIG@ +DX_DOCDIR = @DX_DOCDIR@ +DX_DOT = @DX_DOT@ +DX_DOXYGEN = @DX_DOXYGEN@ +DX_DVIPS = @DX_DVIPS@ +DX_EGREP = @DX_EGREP@ +DX_ENV = @DX_ENV@ +DX_FLAG_chi = @DX_FLAG_chi@ +DX_FLAG_chm = @DX_FLAG_chm@ +DX_FLAG_doc = @DX_FLAG_doc@ +DX_FLAG_dot = @DX_FLAG_dot@ +DX_FLAG_html = @DX_FLAG_html@ +DX_FLAG_man = @DX_FLAG_man@ +DX_FLAG_pdf = @DX_FLAG_pdf@ +DX_FLAG_ps = @DX_FLAG_ps@ +DX_FLAG_rtf = @DX_FLAG_rtf@ +DX_FLAG_xml = @DX_FLAG_xml@ +DX_HHC = @DX_HHC@ +DX_LATEX = @DX_LATEX@ +DX_MAKEINDEX = @DX_MAKEINDEX@ +DX_PDFLATEX = @DX_PDFLATEX@ +DX_PERL = @DX_PERL@ +DX_PROJECT = @DX_PROJECT@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +EGREP = @EGREP@ +EXEEXT = @EXEEXT@ +FGREP = @FGREP@ +GREP = @GREP@ +INSTALL = @INSTALL@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +LD = @LD@ +LDFLAGS = @LDFLAGS@ +LIBOBJS = @LIBOBJS@ +LIBS = @LIBS@ +LIBTOOL = @LIBTOOL@ +LIPO = @LIPO@ +LN_S = @LN_S@ +LTLIBOBJS = @LTLIBOBJS@ +MAINT = @MAINT@ +MAKEINFO = @MAKEINFO@ +MANIFEST_TOOL = @MANIFEST_TOOL@ +MKDIR_P = @MKDIR_P@ +NM = @NM@ +NMEDIT = @NMEDIT@ +OBJDUMP = @OBJDUMP@ +OBJEXT = @OBJEXT@ +OTOOL = @OTOOL@ +OTOOL64 = @OTOOL64@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +PKG_CONFIG = @PKG_CONFIG@ +PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ +PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ +RANLIB = @RANLIB@ +SED = @SED@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +STRIP = @STRIP@ +VERSION = @VERSION@ +ZLIB_CFLAGS = @ZLIB_CFLAGS@ +ZLIB_LIBS = @ZLIB_LIBS@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ +ac_ct_AR = @ac_ct_AR@ +ac_ct_CC = @ac_ct_CC@ +ac_ct_CXX = @ac_ct_CXX@ +ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ +am__include = @am__include@ +am__leading_dot = @am__leading_dot@ +am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ +bindir = @bindir@ +build = @build@ +build_alias = @build_alias@ +build_cpu = @build_cpu@ +build_os = @build_os@ +build_vendor = @build_vendor@ +builddir = @builddir@ +datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ +exec_prefix = @exec_prefix@ +host = @host@ +host_alias = @host_alias@ +host_cpu = @host_cpu@ +host_os = @host_os@ +host_vendor = @host_vendor@ +htmldir = @htmldir@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +libdir = @libdir@ +libexecdir = @libexecdir@ +libzipper_version = @libzipper_version@ +localedir = @localedir@ +localstatedir = @localstatedir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ +sysconfdir = @sysconfdir@ +target = @target@ +target_alias = @target_alias@ +target_cpu = @target_cpu@ +target_os = @target_os@ +target_vendor = @target_vendor@ +top_build_prefix = @top_build_prefix@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ +DOXYGEN_INSTALL = $(am__append_1) $(am__append_2) $(am__append_3) \ + $(am__append_4) $(am__append_5) $(am__append_6) \ + $(am__append_7) $(am__append_8) +@DX_COND_doc_TRUE@@DX_COND_html_TRUE@DX_CLEAN_HTML = @DX_DOCDIR@/html +@DX_COND_chm_TRUE@@DX_COND_doc_TRUE@DX_CLEAN_CHM = @DX_DOCDIR@/chm +@DX_COND_chi_TRUE@@DX_COND_chm_TRUE@@DX_COND_doc_TRUE@DX_CLEAN_CHI = @DX_DOCDIR@/@PACKAGE@.chi +@DX_COND_doc_TRUE@@DX_COND_man_TRUE@DX_CLEAN_MAN = @DX_DOCDIR@/man +@DX_COND_doc_TRUE@@DX_COND_rtf_TRUE@DX_CLEAN_RTF = @DX_DOCDIR@/rtf +@DX_COND_doc_TRUE@@DX_COND_xml_TRUE@DX_CLEAN_XML = @DX_DOCDIR@/xml +@DX_COND_doc_TRUE@@DX_COND_ps_TRUE@DX_CLEAN_PS = @DX_DOCDIR@/@PACKAGE@.ps +@DX_COND_doc_TRUE@@DX_COND_ps_TRUE@DX_PS_GOAL = doxygen-ps +@DX_COND_doc_TRUE@@DX_COND_pdf_TRUE@DX_CLEAN_PDF = @DX_DOCDIR@/@PACKAGE@.pdf +@DX_COND_doc_TRUE@@DX_COND_pdf_TRUE@DX_PDF_GOAL = doxygen-pdf +@DX_COND_doc_TRUE@@DX_COND_latex_TRUE@DX_CLEAN_LATEX = @DX_DOCDIR@/latex +@DX_COND_doc_TRUE@DX_CLEANFILES = \ +@DX_COND_doc_TRUE@ @DX_DOCDIR@/@PACKAGE@.tag \ +@DX_COND_doc_TRUE@ -r \ +@DX_COND_doc_TRUE@ $(DX_CLEAN_HTML) \ +@DX_COND_doc_TRUE@ $(DX_CLEAN_CHM) \ +@DX_COND_doc_TRUE@ $(DX_CLEAN_CHI) \ +@DX_COND_doc_TRUE@ $(DX_CLEAN_MAN) \ +@DX_COND_doc_TRUE@ $(DX_CLEAN_RTF) \ +@DX_COND_doc_TRUE@ $(DX_CLEAN_XML) \ +@DX_COND_doc_TRUE@ $(DX_CLEAN_PS) \ +@DX_COND_doc_TRUE@ $(DX_CLEAN_PDF) \ +@DX_COND_doc_TRUE@ $(DX_CLEAN_LATEX) + +dist_noinst_SCRIPTS = \ + autogen.sh + +pkgconfigdir = $(libdir)/pkgconfig +pkgconfig_DATA = libzipper1.pc +EXTRA_DIST = \ + COPYING \ + INSTALL \ + INSTALL.Android \ + NEWS \ + README \ + VERSION \ + android/zipper/Android.mk + +lib_LTLIBRARIES = libzipper.la +libzipper_la_SOURCES = Compressor.cc CompressedFile.cc Container.cc \ + Decompressor.cc deflate.cc deflate.hh Exception.cc \ + FileReader.cc FileWriter.cc gzip.cc gzip.hh Reader.cc split.hh \ + strerror.hh util.hh Writer.cc zip.hh zip.cc $(am__append_9) \ + $(am__append_10) + +# Public API headers go here, for installation to /usr/include +include_HEADERS = zipper.hh +libzipper_la_LDFLAGS = ${ZLIB_LIBS} -version-info 1:0 +libzipper_la_CFLAGS = ${ZLIB_CFLAGS} +man_MANS = zipper.1 +zipper_SOURCES = \ + zipper.cc + +zipper_LDADD = libzipper.la +MOSTLYCLEANFILES = $(DX_CLEANFILES) +all: autoconfig.h + $(MAKE) $(AM_MAKEFLAGS) all-am + +.SUFFIXES: +.SUFFIXES: .cc .lo .o .obj +am--refresh: + @: +$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(srcdir)/doxygen.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \ + $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \ + && exit 0; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --foreign Makefile +.PRECIOUS: Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + echo ' $(SHELL) ./config.status'; \ + $(SHELL) ./config.status;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + $(SHELL) ./config.status --recheck + +$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) + $(am__cd) $(srcdir) && $(AUTOCONF) +$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) +$(am__aclocal_m4_deps): + +autoconfig.h: stamp-h1 + @if test ! -f $@; then \ + rm -f stamp-h1; \ + $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \ + else :; fi + +stamp-h1: $(srcdir)/autoconfig.h.in $(top_builddir)/config.status + @rm -f stamp-h1 + cd $(top_builddir) && $(SHELL) ./config.status autoconfig.h +$(srcdir)/autoconfig.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) + ($(am__cd) $(top_srcdir) && $(AUTOHEADER)) + rm -f stamp-h1 + touch $@ + +distclean-hdr: + -rm -f autoconfig.h stamp-h1 +Doxyfile: $(top_builddir)/config.status $(srcdir)/Doxyfile.in + cd $(top_builddir) && $(SHELL) ./config.status $@ +libzipper1.pc: $(top_builddir)/config.status $(srcdir)/libzipper1.pc.in + cd $(top_builddir) && $(SHELL) ./config.status $@ +zipper.1: $(top_builddir)/config.status $(srcdir)/zipper.1.in + cd $(top_builddir) && $(SHELL) ./config.status $@ +install-libLTLIBRARIES: $(lib_LTLIBRARIES) + @$(NORMAL_INSTALL) + test -z "$(libdir)" || $(MKDIR_P) "$(DESTDIR)$(libdir)" + @list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \ + list2=; for p in $$list; do \ + if test -f $$p; then \ + list2="$$list2 $$p"; \ + else :; fi; \ + done; \ + test -z "$$list2" || { \ + echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(libdir)'"; \ + $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(libdir)"; \ + } + +uninstall-libLTLIBRARIES: + @$(NORMAL_UNINSTALL) + @list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \ + for p in $$list; do \ + $(am__strip_dir) \ + echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$f'"; \ + $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$f"; \ + done + +clean-libLTLIBRARIES: + -test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES) + @list='$(lib_LTLIBRARIES)'; for p in $$list; do \ + dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \ + test "$$dir" != "$$p" || dir=.; \ + echo "rm -f \"$${dir}/so_locations\""; \ + rm -f "$${dir}/so_locations"; \ + done +libzipper.la: $(libzipper_la_OBJECTS) $(libzipper_la_DEPENDENCIES) + $(libzipper_la_LINK) -rpath $(libdir) $(libzipper_la_OBJECTS) $(libzipper_la_LIBADD) $(LIBS) +install-binPROGRAMS: $(bin_PROGRAMS) + @$(NORMAL_INSTALL) + test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)" + @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \ + for p in $$list; do echo "$$p $$p"; done | \ + sed 's/$(EXEEXT)$$//' | \ + while read p p1; do if test -f $$p || test -f $$p1; \ + then echo "$$p"; echo "$$p"; else :; fi; \ + done | \ + sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \ + -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \ + sed 'N;N;N;s,\n, ,g' | \ + $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \ + { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ + if ($$2 == $$4) files[d] = files[d] " " $$1; \ + else { print "f", $$3 "/" $$4, $$1; } } \ + END { for (d in files) print "f", d, files[d] }' | \ + while read type dir files; do \ + if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ + test -z "$$files" || { \ + echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \ + $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \ + } \ + ; done + +uninstall-binPROGRAMS: + @$(NORMAL_UNINSTALL) + @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \ + files=`for p in $$list; do echo "$$p"; done | \ + sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \ + -e 's/$$/$(EXEEXT)/' `; \ + test -n "$$list" || exit 0; \ + echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \ + cd "$(DESTDIR)$(bindir)" && rm -f $$files + +clean-binPROGRAMS: + @list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \ + echo " rm -f" $$list; \ + rm -f $$list || exit $$?; \ + test -n "$(EXEEXT)" || exit 0; \ + list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ + echo " rm -f" $$list; \ + rm -f $$list +zipper$(EXEEXT): $(zipper_OBJECTS) $(zipper_DEPENDENCIES) + @rm -f zipper$(EXEEXT) + $(CXXLINK) $(zipper_OBJECTS) $(zipper_LDADD) $(LIBS) + +mostlyclean-compile: + -rm -f *.$(OBJEXT) + +distclean-compile: + -rm -f *.tab.c + +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/CompressedFile.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/Compressor.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/Container.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/Decompressor.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/Exception.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/FileReader.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/FileWriter.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/Reader.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/Writer.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/deflate.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gzip.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/strerror_gnu.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/strerror_posix.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/zip.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/zipper.Po@am__quote@ + +.cc.o: +@am__fastdepCXX_TRUE@ $(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +@AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCXX_FALSE@ $(CXXCOMPILE) -c -o $@ $< + +.cc.obj: +@am__fastdepCXX_TRUE@ $(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` +@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +@AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCXX_FALSE@ $(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'` + +.cc.lo: +@am__fastdepCXX_TRUE@ $(LTCXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo +@AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCXX_FALSE@ $(LTCXXCOMPILE) -c -o $@ $< + +strerror_gnu.lo: port/strerror_gnu.cc +@am__fastdepCXX_TRUE@ $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT strerror_gnu.lo -MD -MP -MF $(DEPDIR)/strerror_gnu.Tpo -c -o strerror_gnu.lo `test -f 'port/strerror_gnu.cc' || echo '$(srcdir)/'`port/strerror_gnu.cc +@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/strerror_gnu.Tpo $(DEPDIR)/strerror_gnu.Plo +@AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='port/strerror_gnu.cc' object='strerror_gnu.lo' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCXX_FALSE@ $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o strerror_gnu.lo `test -f 'port/strerror_gnu.cc' || echo '$(srcdir)/'`port/strerror_gnu.cc + +strerror_posix.lo: port/strerror_posix.cc +@am__fastdepCXX_TRUE@ $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT strerror_posix.lo -MD -MP -MF $(DEPDIR)/strerror_posix.Tpo -c -o strerror_posix.lo `test -f 'port/strerror_posix.cc' || echo '$(srcdir)/'`port/strerror_posix.cc +@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/strerror_posix.Tpo $(DEPDIR)/strerror_posix.Plo +@AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='port/strerror_posix.cc' object='strerror_posix.lo' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCXX_FALSE@ $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o strerror_posix.lo `test -f 'port/strerror_posix.cc' || echo '$(srcdir)/'`port/strerror_posix.cc + +mostlyclean-libtool: + -rm -f *.lo + +clean-libtool: + -rm -rf .libs _libs + +distclean-libtool: + -rm -f libtool config.lt +install-man1: $(man_MANS) + @$(NORMAL_INSTALL) + test -z "$(man1dir)" || $(MKDIR_P) "$(DESTDIR)$(man1dir)" + @list=''; test -n "$(man1dir)" || exit 0; \ + { for i in $$list; do echo "$$i"; done; \ + l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \ + sed -n '/\.1[a-z]*$$/p'; \ + } | while read p; do \ + if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; echo "$$p"; \ + done | \ + sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \ + -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \ + sed 'N;N;s,\n, ,g' | { \ + list=; while read file base inst; do \ + if test "$$base" = "$$inst"; then list="$$list $$file"; else \ + echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \ + $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \ + fi; \ + done; \ + for i in $$list; do echo "$$i"; done | $(am__base_list) | \ + while read files; do \ + test -z "$$files" || { \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \ + done; } + +uninstall-man1: + @$(NORMAL_UNINSTALL) + @list=''; test -n "$(man1dir)" || exit 0; \ + files=`{ for i in $$list; do echo "$$i"; done; \ + l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \ + sed -n '/\.1[a-z]*$$/p'; \ + } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \ + -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \ + test -z "$$files" || { \ + echo " ( cd '$(DESTDIR)$(man1dir)' && rm -f" $$files ")"; \ + cd "$(DESTDIR)$(man1dir)" && rm -f $$files; } +install-pkgconfigDATA: $(pkgconfig_DATA) + @$(NORMAL_INSTALL) + test -z "$(pkgconfigdir)" || $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)" + @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \ + for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; \ + done | $(am__base_list) | \ + while read files; do \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \ + done + +uninstall-pkgconfigDATA: + @$(NORMAL_UNINSTALL) + @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \ + files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ + test -n "$$files" || exit 0; \ + echo " ( cd '$(DESTDIR)$(pkgconfigdir)' && rm -f" $$files ")"; \ + cd "$(DESTDIR)$(pkgconfigdir)" && rm -f $$files +install-includeHEADERS: $(include_HEADERS) + @$(NORMAL_INSTALL) + test -z "$(includedir)" || $(MKDIR_P) "$(DESTDIR)$(includedir)" + @list='$(include_HEADERS)'; test -n "$(includedir)" || list=; \ + for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; \ + done | $(am__base_list) | \ + while read files; do \ + echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(includedir)'"; \ + $(INSTALL_HEADER) $$files "$(DESTDIR)$(includedir)" || exit $$?; \ + done + +uninstall-includeHEADERS: + @$(NORMAL_UNINSTALL) + @list='$(include_HEADERS)'; test -n "$(includedir)" || list=; \ + files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ + test -n "$$files" || exit 0; \ + echo " ( cd '$(DESTDIR)$(includedir)' && rm -f" $$files ")"; \ + cd "$(DESTDIR)$(includedir)" && rm -f $$files + +ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + mkid -fID $$unique +tags: TAGS + +TAGS: $(HEADERS) $(SOURCES) autoconfig.h.in $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + set x; \ + here=`pwd`; \ + list='$(SOURCES) $(HEADERS) autoconfig.h.in $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + shift; \ + if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + if test $$# -gt 0; then \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + "$$@" $$unique; \ + else \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$unique; \ + fi; \ + fi +ctags: CTAGS +CTAGS: $(HEADERS) $(SOURCES) autoconfig.h.in $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + list='$(SOURCES) $(HEADERS) autoconfig.h.in $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + test -z "$(CTAGS_ARGS)$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$unique + +GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ + && $(am__cd) $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) "$$here" + +distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + +distdir: $(DISTFILES) + @list='$(MANS)'; if test -n "$$list"; then \ + list=`for p in $$list; do \ + if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ + if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \ + if test -n "$$list" && \ + grep 'ab help2man is required to generate this page' $$list >/dev/null; then \ + echo "error: found man pages containing the \`missing help2man' replacement text:" >&2; \ + grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/ /' >&2; \ + echo " to fix them, install help2man, remove and regenerate the man pages;" >&2; \ + echo " typically \`make maintainer-clean' will remove them" >&2; \ + exit 1; \ + else :; fi; \ + else :; fi + $(am__remove_distdir) + test -d "$(distdir)" || mkdir "$(distdir)" + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done + -test -n "$(am__skip_mode_fix)" \ + || find "$(distdir)" -type d ! -perm -755 \ + -exec chmod u+rwx,go+rx {} \; -o \ + ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ + ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ + ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ + || chmod -R a+r "$(distdir)" +dist-gzip: distdir + tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz + $(am__remove_distdir) + +dist-bzip2: distdir + tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2 + $(am__remove_distdir) + +dist-lzma: distdir + tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma + $(am__remove_distdir) + +dist-xz: distdir + tardir=$(distdir) && $(am__tar) | xz -c >$(distdir).tar.xz + $(am__remove_distdir) + +dist-tarZ: distdir + tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z + $(am__remove_distdir) + +dist-shar: distdir + shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz + $(am__remove_distdir) + +dist-zip: distdir + -rm -f $(distdir).zip + zip -rq $(distdir).zip $(distdir) + $(am__remove_distdir) + +dist dist-all: distdir + tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz + $(am__remove_distdir) + +# This target untars the dist file and tries a VPATH configuration. Then +# it guarantees that the distribution is self-contained by making another +# tarfile. +distcheck: dist + case '$(DIST_ARCHIVES)' in \ + *.tar.gz*) \ + GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\ + *.tar.bz2*) \ + bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ + *.tar.lzma*) \ + lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\ + *.tar.xz*) \ + xz -dc $(distdir).tar.xz | $(am__untar) ;;\ + *.tar.Z*) \ + uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ + *.shar.gz*) \ + GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\ + *.zip*) \ + unzip $(distdir).zip ;;\ + esac + chmod -R a-w $(distdir); chmod a+w $(distdir) + mkdir $(distdir)/_build + mkdir $(distdir)/_inst + chmod a-w $(distdir) + test -d $(distdir)/_build || exit 0; \ + dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ + && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ + && am__cwd=`pwd` \ + && $(am__cd) $(distdir)/_build \ + && ../configure --srcdir=.. --prefix="$$dc_install_base" \ + $(DISTCHECK_CONFIGURE_FLAGS) \ + && $(MAKE) $(AM_MAKEFLAGS) \ + && $(MAKE) $(AM_MAKEFLAGS) dvi \ + && $(MAKE) $(AM_MAKEFLAGS) check \ + && $(MAKE) $(AM_MAKEFLAGS) install \ + && $(MAKE) $(AM_MAKEFLAGS) installcheck \ + && $(MAKE) $(AM_MAKEFLAGS) uninstall \ + && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ + distuninstallcheck \ + && chmod -R a-w "$$dc_install_base" \ + && ({ \ + (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ + distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ + } || { rm -rf "$$dc_destdir"; exit 1; }) \ + && rm -rf "$$dc_destdir" \ + && $(MAKE) $(AM_MAKEFLAGS) dist \ + && rm -rf $(DIST_ARCHIVES) \ + && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ + && cd "$$am__cwd" \ + || exit 1 + $(am__remove_distdir) + @(echo "$(distdir) archives ready for distribution: "; \ + list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ + sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' +distuninstallcheck: + @$(am__cd) '$(distuninstallcheck_dir)' \ + && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \ + || { echo "ERROR: files left after uninstall:" ; \ + if test -n "$(DESTDIR)"; then \ + echo " (check DESTDIR support)"; \ + fi ; \ + $(distuninstallcheck_listfiles) ; \ + exit 1; } >&2 +distcleancheck: distclean + @if test '$(srcdir)' = . ; then \ + echo "ERROR: distcleancheck can only run from a VPATH build" ; \ + exit 1 ; \ + fi + @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ + || { echo "ERROR: files left in build directory after distclean:" ; \ + $(distcleancheck_listfiles) ; \ + exit 1; } >&2 +check-am: all-am +check: check-am +all-am: Makefile $(LTLIBRARIES) $(PROGRAMS) $(SCRIPTS) $(MANS) $(DATA) \ + $(HEADERS) autoconfig.h all-local +install-binPROGRAMS: install-libLTLIBRARIES + +installdirs: + for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(pkgconfigdir)" "$(DESTDIR)$(includedir)"; do \ + test -z "$$dir" || $(MKDIR_P) "$$dir"; \ + done +install: install-am +install-exec: install-exec-am +install-data: install-data-am +uninstall: uninstall-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-am +install-strip: + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + `test -z '$(STRIP)' || \ + echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install +mostlyclean-generic: + -test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES) + +clean-generic: + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +clean: clean-am + +clean-am: clean-binPROGRAMS clean-generic clean-libLTLIBRARIES \ + clean-libtool mostlyclean-am + +distclean: distclean-am + -rm -f $(am__CONFIG_DISTCLEAN_FILES) + -rm -rf ./$(DEPDIR) + -rm -f Makefile +distclean-am: clean-am distclean-compile distclean-generic \ + distclean-hdr distclean-libtool distclean-tags + +dvi: dvi-am + +dvi-am: + +html: html-am + +html-am: + +info: info-am + +info-am: + +install-data-am: install-data-local install-includeHEADERS install-man \ + install-pkgconfigDATA + +install-dvi: install-dvi-am + +install-dvi-am: + +install-exec-am: install-binPROGRAMS install-libLTLIBRARIES + +install-html: install-html-am + +install-html-am: + +install-info: install-info-am + +install-info-am: + +install-man: install-man1 + +install-pdf: install-pdf-am + +install-pdf-am: + +install-ps: install-ps-am + +install-ps-am: + +installcheck-am: + +maintainer-clean: maintainer-clean-am + -rm -f $(am__CONFIG_DISTCLEAN_FILES) + -rm -rf $(top_srcdir)/autom4te.cache + -rm -rf ./$(DEPDIR) + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-am + +mostlyclean-am: mostlyclean-compile mostlyclean-generic \ + mostlyclean-libtool + +pdf: pdf-am + +pdf-am: + +ps: ps-am + +ps-am: + +uninstall-am: uninstall-binPROGRAMS uninstall-includeHEADERS \ + uninstall-libLTLIBRARIES uninstall-man uninstall-pkgconfigDATA + +uninstall-man: uninstall-man1 + +.MAKE: all install-am install-strip + +.PHONY: CTAGS GTAGS all all-am all-local am--refresh check check-am \ + clean clean-binPROGRAMS clean-generic clean-libLTLIBRARIES \ + clean-libtool ctags dist dist-all dist-bzip2 dist-gzip \ + dist-lzma dist-shar dist-tarZ dist-xz dist-zip distcheck \ + distclean distclean-compile distclean-generic distclean-hdr \ + distclean-libtool distclean-tags distcleancheck distdir \ + distuninstallcheck dvi dvi-am html html-am info info-am \ + install install-am install-binPROGRAMS install-data \ + install-data-am install-data-local install-dvi install-dvi-am \ + install-exec install-exec-am install-html install-html-am \ + install-includeHEADERS install-info install-info-am \ + install-libLTLIBRARIES install-man install-man1 install-pdf \ + install-pdf-am install-pkgconfigDATA install-ps install-ps-am \ + install-strip installcheck installcheck-am installdirs \ + maintainer-clean maintainer-clean-generic mostlyclean \ + mostlyclean-compile mostlyclean-generic mostlyclean-libtool \ + pdf pdf-am ps ps-am tags uninstall uninstall-am \ + uninstall-binPROGRAMS uninstall-includeHEADERS \ + uninstall-libLTLIBRARIES uninstall-man uninstall-man1 \ + uninstall-pkgconfigDATA + + +@DX_COND_doc_TRUE@@DX_COND_html_TRUE@doxygen-install-html: +@DX_COND_doc_TRUE@@DX_COND_html_TRUE@ $(INSTALL) -d $(DESTDIR)$(docdir)/html; \ +@DX_COND_doc_TRUE@@DX_COND_html_TRUE@ $(INSTALL_DATA) @DX_DOCDIR@/html/* $(DESTDIR)$(docdir)/html; + +@DX_COND_chm_TRUE@@DX_COND_doc_TRUE@doxygen-install-chm: +@DX_COND_chm_TRUE@@DX_COND_doc_TRUE@ $(INSTALL) -d $(DESTDIR)$(docdir)/chm; \ +@DX_COND_chm_TRUE@@DX_COND_doc_TRUE@ $(INSTALL_DATA) @DX_DOCDIR@/chm/* $(DESTDIR)$(docdir)/chm; + +@DX_COND_doc_TRUE@@DX_COND_man_TRUE@doxygen-install-man: +@DX_COND_doc_TRUE@@DX_COND_man_TRUE@ $(INSTALL) -d $(DESTDIR)$(docdir)/man; \ +@DX_COND_doc_TRUE@@DX_COND_man_TRUE@ $(INSTALL_DATA) @DX_DOCDIR@/man/* $(DESTDIR)$(docdir)/man; + +@DX_COND_doc_TRUE@@DX_COND_rtf_TRUE@doxygen-install-rtf: +@DX_COND_doc_TRUE@@DX_COND_rtf_TRUE@ $(INSTALL) -d $(DESTDIR)$(docdir)/rtf; \ +@DX_COND_doc_TRUE@@DX_COND_rtf_TRUE@ $(INSTALL_DATA) @DX_DOCDIR@/rtf/* $(DESTDIR)$(docdir)/rtf; + +@DX_COND_doc_TRUE@@DX_COND_xml_TRUE@doxygen-install-xml: +@DX_COND_doc_TRUE@@DX_COND_xml_TRUE@ $(INSTALL) -d $(DESTDIR)$(docdir)/xml; \ +@DX_COND_doc_TRUE@@DX_COND_xml_TRUE@ $(INSTALL_DATA) @DX_DOCDIR@/xml/* $(DESTDIR)$(docdir)/xml; + +@DX_COND_doc_TRUE@@DX_COND_ps_TRUE@doxygen-ps: @DX_DOCDIR@/@PACKAGE@.ps + +@DX_COND_doc_TRUE@@DX_COND_ps_TRUE@@DX_DOCDIR@/@PACKAGE@.ps: @DX_DOCDIR@/@PACKAGE@.tag +@DX_COND_doc_TRUE@@DX_COND_ps_TRUE@ cd @DX_DOCDIR@/latex; \ +@DX_COND_doc_TRUE@@DX_COND_ps_TRUE@ rm -f *.aux *.toc *.idx *.ind *.ilg *.log *.out; \ +@DX_COND_doc_TRUE@@DX_COND_ps_TRUE@ $(DX_LATEX) refman.tex; \ +@DX_COND_doc_TRUE@@DX_COND_ps_TRUE@ $(MAKEINDEX_PATH) refman.idx; \ +@DX_COND_doc_TRUE@@DX_COND_ps_TRUE@ $(DX_LATEX) refman.tex; \ +@DX_COND_doc_TRUE@@DX_COND_ps_TRUE@ countdown=5; \ +@DX_COND_doc_TRUE@@DX_COND_ps_TRUE@ while $(DX_EGREP) 'Rerun (LaTeX|to get cross-references right)' \ +@DX_COND_doc_TRUE@@DX_COND_ps_TRUE@ refman.log > /dev/null 2>&1 \ +@DX_COND_doc_TRUE@@DX_COND_ps_TRUE@ && test $$countdown -gt 0; do \ +@DX_COND_doc_TRUE@@DX_COND_ps_TRUE@ $(DX_LATEX) refman.tex; \ +@DX_COND_doc_TRUE@@DX_COND_ps_TRUE@ countdown=`expr $$countdown - 1`; \ +@DX_COND_doc_TRUE@@DX_COND_ps_TRUE@ done; \ +@DX_COND_doc_TRUE@@DX_COND_ps_TRUE@ $(DX_DVIPS) -o ../@PACKAGE@.ps refman.dvi + +@DX_COND_doc_TRUE@@DX_COND_ps_TRUE@doxygen-install-ps: +@DX_COND_doc_TRUE@@DX_COND_ps_TRUE@ $(INSTALL_DATA) @DX_DOCDIR@/@PACKAGE@.ps $(DESTDIR)$(docdir); + +@DX_COND_doc_TRUE@@DX_COND_pdf_TRUE@doxygen-pdf: @DX_DOCDIR@/@PACKAGE@.pdf + +@DX_COND_doc_TRUE@@DX_COND_pdf_TRUE@@DX_DOCDIR@/@PACKAGE@.pdf: @DX_DOCDIR@/@PACKAGE@.tag +@DX_COND_doc_TRUE@@DX_COND_pdf_TRUE@ cd @DX_DOCDIR@/latex; \ +@DX_COND_doc_TRUE@@DX_COND_pdf_TRUE@ rm -f *.aux *.toc *.idx *.ind *.ilg *.log *.out; \ +@DX_COND_doc_TRUE@@DX_COND_pdf_TRUE@ $(DX_PDFLATEX) refman.tex; \ +@DX_COND_doc_TRUE@@DX_COND_pdf_TRUE@ $(DX_MAKEINDEX) refman.idx; \ +@DX_COND_doc_TRUE@@DX_COND_pdf_TRUE@ $(DX_PDFLATEX) refman.tex; \ +@DX_COND_doc_TRUE@@DX_COND_pdf_TRUE@ countdown=5; \ +@DX_COND_doc_TRUE@@DX_COND_pdf_TRUE@ while $(DX_EGREP) 'Rerun (LaTeX|to get cross-references right)' \ +@DX_COND_doc_TRUE@@DX_COND_pdf_TRUE@ refman.log > /dev/null 2>&1 \ +@DX_COND_doc_TRUE@@DX_COND_pdf_TRUE@ && test $$countdown -gt 0; do \ +@DX_COND_doc_TRUE@@DX_COND_pdf_TRUE@ $(DX_PDFLATEX) refman.tex; \ +@DX_COND_doc_TRUE@@DX_COND_pdf_TRUE@ countdown=`expr $$countdown - 1`; \ +@DX_COND_doc_TRUE@@DX_COND_pdf_TRUE@ done; \ +@DX_COND_doc_TRUE@@DX_COND_pdf_TRUE@ mv refman.pdf ../@PACKAGE@.pdf + +@DX_COND_doc_TRUE@@DX_COND_pdf_TRUE@doxygen-install-pdf: +@DX_COND_doc_TRUE@@DX_COND_pdf_TRUE@ $(INSTALL_DATA) @DX_DOCDIR@/@PACKAGE@.pdf $(DESTDIR)$(docdir); + +@DX_COND_doc_TRUE@@DX_COND_latex_TRUE@doxygen-install-latex: +@DX_COND_doc_TRUE@@DX_COND_latex_TRUE@ $(INSTALL) -d $(DESTDIR)$(docdir)/latex; \ +@DX_COND_doc_TRUE@@DX_COND_latex_TRUE@ $(INSTALL_DATA) @DX_DOCDIR@/latex/* $(DESTDIR)$(docdir)/latex; + +@DX_COND_doc_TRUE@.PHONY: doxygen-run doxygen-doc doxygen-install $(DX_PS_GOAL) $(DX_PDF_GOAL) + +@DX_COND_doc_TRUE@.INTERMEDIATE: doxygen-run $(DX_PS_GOAL) $(DX_PDF_GOAL) + +@DX_COND_doc_TRUE@doxygen-run: @DX_DOCDIR@/@PACKAGE@.tag + +@DX_COND_doc_TRUE@doxygen-doc: doxygen-run $(DX_PS_GOAL) $(DX_PDF_GOAL) + +@DX_COND_doc_TRUE@doxygen-install: $(DOXYGEN_INSTALL) + +@DX_COND_doc_TRUE@@DX_DOCDIR@/@PACKAGE@.tag: $(DX_CONFIG) $(pkginclude_HEADERS) +@DX_COND_doc_TRUE@ rm -rf @DX_DOCDIR@ +@DX_COND_doc_TRUE@ $(DX_ENV) $(DX_DOXYGEN) $(DX_CONFIG) + +install-data-local: doxygen-install +all-local: doxygen-doc + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/software/scsi2sd-util/libzipper-1.0.3/NEWS b/software/scsi2sd-util/libzipper-1.0.3/NEWS new file mode 100644 index 0000000..0c5196c --- /dev/null +++ b/software/scsi2sd-util/libzipper-1.0.3/NEWS @@ -0,0 +1,15 @@ +2011-10-05 Version 1.0.3 + - Added Android NDK support + +2011-09-07 Version 1.0.2 + - Fixed a bug in deflate, which caused it to exit prematurely and + report valid files as corrupt. + +2011-05-27 Version 1.0.1 + - Removed private classes from doxygen output + - Added the zipper utility executable + - Added timestamp support + +2011-05-21 Version 1.0.0 + - Initial release + diff --git a/software/scsi2sd-util/libzipper-1.0.3/README b/software/scsi2sd-util/libzipper-1.0.3/README new file mode 100644 index 0000000..ea954f4 --- /dev/null +++ b/software/scsi2sd-util/libzipper-1.0.3/README @@ -0,0 +1,17 @@ +libzipper +Michael McMaster + +libzipper offers a flexible C++ interface for reading and writing compressed +files in multiple formats. It is intended for use in reading small compressed +data files, such as configuration files and saved games. + +libzipper currently supports plain, zip, and gzip formats. + +libzipper is not a general-purpose archive management library, as it +does not provide access to the filesystem attributes of each file. +(ie. libzipper does not support the concepts of file owner, group or +permissions. + +Missing Features + - zip64 support (for >4Gb zip files) + diff --git a/software/scsi2sd-util/libzipper-1.0.3/Reader.cc b/software/scsi2sd-util/libzipper-1.0.3/Reader.cc new file mode 100644 index 0000000..fe0b377 --- /dev/null +++ b/software/scsi2sd-util/libzipper-1.0.3/Reader.cc @@ -0,0 +1,25 @@ +// Copyright (C) 2011 Michael McMaster +// +// This file is part of libzipper. +// +// libzipper is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// libzipper is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with libzipper. If not, see . + +#include "zipper.hh" + +using namespace zipper; + +Reader::~Reader() +{ +} + diff --git a/software/scsi2sd-util/libzipper-1.0.3/VERSION b/software/scsi2sd-util/libzipper-1.0.3/VERSION new file mode 100644 index 0000000..21e8796 --- /dev/null +++ b/software/scsi2sd-util/libzipper-1.0.3/VERSION @@ -0,0 +1 @@ +1.0.3 diff --git a/software/scsi2sd-util/libzipper-1.0.3/Writer.cc b/software/scsi2sd-util/libzipper-1.0.3/Writer.cc new file mode 100644 index 0000000..8026e39 --- /dev/null +++ b/software/scsi2sd-util/libzipper-1.0.3/Writer.cc @@ -0,0 +1,25 @@ +// Copyright (C) 2011 Michael McMaster +// +// This file is part of libzipper. +// +// libzipper is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// libzipper is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with libzipper. If not, see . + +#include "zipper.hh" + +using namespace zipper; + +Writer::~Writer() +{ +} + diff --git a/software/scsi2sd-util/libzipper-1.0.3/aclocal.m4 b/software/scsi2sd-util/libzipper-1.0.3/aclocal.m4 new file mode 100644 index 0000000..e8c52b8 --- /dev/null +++ b/software/scsi2sd-util/libzipper-1.0.3/aclocal.m4 @@ -0,0 +1,10124 @@ +# generated automatically by aclocal 1.11.1 -*- Autoconf -*- + +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, +# 2005, 2006, 2007, 2008, 2009 Free Software Foundation, Inc. +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +m4_ifndef([AC_AUTOCONF_VERSION], + [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl +m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.68],, +[m4_warning([this file was generated for autoconf 2.68. +You have another version of autoconf. It may work, but is not guaranteed to. +If you have problems, you may need to regenerate the build system entirely. +To do so, use the procedure documented by the package, typically `autoreconf'.])]) + +# =========================================================================== +# http://www.gnu.org/software/autoconf-archive/ax_prog_doxygen.html +# =========================================================================== +# +# SYNOPSIS +# +# DX_INIT_DOXYGEN(PROJECT-NAME, DOXYFILE-PATH, [OUTPUT-DIR]) +# DX_DOXYGEN_FEATURE(ON|OFF) +# DX_DOT_FEATURE(ON|OFF) +# DX_HTML_FEATURE(ON|OFF) +# DX_CHM_FEATURE(ON|OFF) +# DX_CHI_FEATURE(ON|OFF) +# DX_MAN_FEATURE(ON|OFF) +# DX_RTF_FEATURE(ON|OFF) +# DX_XML_FEATURE(ON|OFF) +# DX_PDF_FEATURE(ON|OFF) +# DX_PS_FEATURE(ON|OFF) +# +# DESCRIPTION +# +# The DX_*_FEATURE macros control the default setting for the given +# Doxygen feature. Supported features are 'DOXYGEN' itself, 'DOT' for +# generating graphics, 'HTML' for plain HTML, 'CHM' for compressed HTML +# help (for MS users), 'CHI' for generating a seperate .chi file by the +# .chm file, and 'MAN', 'RTF', 'XML', 'PDF' and 'PS' for the appropriate +# output formats. The environment variable DOXYGEN_PAPER_SIZE may be +# specified to override the default 'a4wide' paper size. +# +# By default, HTML, PDF and PS documentation is generated as this seems to +# be the most popular and portable combination. MAN pages created by +# Doxygen are usually problematic, though by picking an appropriate subset +# and doing some massaging they might be better than nothing. CHM and RTF +# are specific for MS (note that you can't generate both HTML and CHM at +# the same time). The XML is rather useless unless you apply specialized +# post-processing to it. +# +# The macros mainly control the default state of the feature. The use can +# override the default by specifying --enable or --disable. The macros +# ensure that contradictory flags are not given (e.g., +# --enable-doxygen-html and --enable-doxygen-chm, +# --enable-doxygen-anything with --disable-doxygen, etc.) Finally, each +# feature will be automatically disabled (with a warning) if the required +# programs are missing. +# +# Once all the feature defaults have been specified, call DX_INIT_DOXYGEN +# with the following parameters: a one-word name for the project for use +# as a filename base etc., an optional configuration file name (the +# default is 'Doxyfile', the same as Doxygen's default), and an optional +# output directory name (the default is 'doxygen-doc'). +# +# Automake Support +# +# The following is a template aminclude.am file for use with Automake. +# Make targets and variables values are controlled by the various +# DX_COND_* conditionals set by autoconf. +# +# The provided targets are: +# +# doxygen-doc: Generate all doxygen documentation. +# +# doxygen-run: Run doxygen, which will generate some of the +# documentation (HTML, CHM, CHI, MAN, RTF, XML) +# but will not do the post processing required +# for the rest of it (PS, PDF, and some MAN). +# +# doxygen-man: Rename some doxygen generated man pages. +# +# doxygen-ps: Generate doxygen PostScript documentation. +# +# doxygen-pdf: Generate doxygen PDF documentation. +# +# Note that by default these are not integrated into the automake targets. +# If doxygen is used to generate man pages, you can achieve this +# integration by setting man3_MANS to the list of man pages generated and +# then adding the dependency: +# +# $(man3_MANS): doxygen-doc +# +# This will cause make to run doxygen and generate all the documentation. +# +# The following variable is intended for use in Makefile.am: +# +# DX_CLEANFILES = everything to clean. +# +# Then add this variable to MOSTLYCLEANFILES. +# +# ----- begin aminclude.am ------------------------------------- +# +# ## --------------------------------- ## +# ## Format-independent Doxygen rules. ## +# ## --------------------------------- ## +# +# if DX_COND_doc +# +# ## ------------------------------- ## +# ## Rules specific for HTML output. ## +# ## ------------------------------- ## +# +# if DX_COND_html +# +# DX_CLEAN_HTML = @DX_DOCDIR@/html +# +# endif DX_COND_html +# +# ## ------------------------------ ## +# ## Rules specific for CHM output. ## +# ## ------------------------------ ## +# +# if DX_COND_chm +# +# DX_CLEAN_CHM = @DX_DOCDIR@/chm +# +# if DX_COND_chi +# +# DX_CLEAN_CHI = @DX_DOCDIR@/@PACKAGE@.chi +# +# endif DX_COND_chi +# +# endif DX_COND_chm +# +# ## ------------------------------ ## +# ## Rules specific for MAN output. ## +# ## ------------------------------ ## +# +# if DX_COND_man +# +# DX_CLEAN_MAN = @DX_DOCDIR@/man +# +# endif DX_COND_man +# +# ## ------------------------------ ## +# ## Rules specific for RTF output. ## +# ## ------------------------------ ## +# +# if DX_COND_rtf +# +# DX_CLEAN_RTF = @DX_DOCDIR@/rtf +# +# endif DX_COND_rtf +# +# ## ------------------------------ ## +# ## Rules specific for XML output. ## +# ## ------------------------------ ## +# +# if DX_COND_xml +# +# DX_CLEAN_XML = @DX_DOCDIR@/xml +# +# endif DX_COND_xml +# +# ## ----------------------------- ## +# ## Rules specific for PS output. ## +# ## ----------------------------- ## +# +# if DX_COND_ps +# +# DX_CLEAN_PS = @DX_DOCDIR@/@PACKAGE@.ps +# +# DX_PS_GOAL = doxygen-ps +# +# doxygen-ps: @DX_DOCDIR@/@PACKAGE@.ps +# +# @DX_DOCDIR@/@PACKAGE@.ps: @DX_DOCDIR@/@PACKAGE@.tag +# cd @DX_DOCDIR@/latex; \ +# rm -f *.aux *.toc *.idx *.ind *.ilg *.log *.out; \ +# $(DX_LATEX) refman.tex; \ +# $(MAKEINDEX_PATH) refman.idx; \ +# $(DX_LATEX) refman.tex; \ +# countdown=5; \ +# while $(DX_EGREP) 'Rerun (LaTeX|to get cross-references right)' \ +# refman.log > /dev/null 2>&1 \ +# && test $$countdown -gt 0; do \ +# $(DX_LATEX) refman.tex; \ +# countdown=`expr $$countdown - 1`; \ +# done; \ +# $(DX_DVIPS) -o ../@PACKAGE@.ps refman.dvi +# +# endif DX_COND_ps +# +# ## ------------------------------ ## +# ## Rules specific for PDF output. ## +# ## ------------------------------ ## +# +# if DX_COND_pdf +# +# DX_CLEAN_PDF = @DX_DOCDIR@/@PACKAGE@.pdf +# +# DX_PDF_GOAL = doxygen-pdf +# +# doxygen-pdf: @DX_DOCDIR@/@PACKAGE@.pdf +# +# @DX_DOCDIR@/@PACKAGE@.pdf: @DX_DOCDIR@/@PACKAGE@.tag +# cd @DX_DOCDIR@/latex; \ +# rm -f *.aux *.toc *.idx *.ind *.ilg *.log *.out; \ +# $(DX_PDFLATEX) refman.tex; \ +# $(DX_MAKEINDEX) refman.idx; \ +# $(DX_PDFLATEX) refman.tex; \ +# countdown=5; \ +# while $(DX_EGREP) 'Rerun (LaTeX|to get cross-references right)' \ +# refman.log > /dev/null 2>&1 \ +# && test $$countdown -gt 0; do \ +# $(DX_PDFLATEX) refman.tex; \ +# countdown=`expr $$countdown - 1`; \ +# done; \ +# mv refman.pdf ../@PACKAGE@.pdf +# +# endif DX_COND_pdf +# +# ## ------------------------------------------------- ## +# ## Rules specific for LaTeX (shared for PS and PDF). ## +# ## ------------------------------------------------- ## +# +# if DX_COND_latex +# +# DX_CLEAN_LATEX = @DX_DOCDIR@/latex +# +# endif DX_COND_latex +# +# .PHONY: doxygen-run doxygen-doc $(DX_PS_GOAL) $(DX_PDF_GOAL) +# +# .INTERMEDIATE: doxygen-run $(DX_PS_GOAL) $(DX_PDF_GOAL) +# +# doxygen-run: @DX_DOCDIR@/@PACKAGE@.tag +# +# doxygen-doc: doxygen-run $(DX_PS_GOAL) $(DX_PDF_GOAL) +# +# @DX_DOCDIR@/@PACKAGE@.tag: $(DX_CONFIG) $(pkginclude_HEADERS) +# rm -rf @DX_DOCDIR@ +# $(DX_ENV) $(DX_DOXYGEN) $(srcdir)/$(DX_CONFIG) +# +# DX_CLEANFILES = \ +# @DX_DOCDIR@/@PACKAGE@.tag \ +# -r \ +# $(DX_CLEAN_HTML) \ +# $(DX_CLEAN_CHM) \ +# $(DX_CLEAN_CHI) \ +# $(DX_CLEAN_MAN) \ +# $(DX_CLEAN_RTF) \ +# $(DX_CLEAN_XML) \ +# $(DX_CLEAN_PS) \ +# $(DX_CLEAN_PDF) \ +# $(DX_CLEAN_LATEX) +# +# endif DX_COND_doc +# +# ----- end aminclude.am --------------------------------------- +# +# LICENSE +# +# Copyright (c) 2009 Oren Ben-Kiki +# +# Copying and distribution of this file, with or without modification, are +# permitted in any medium without royalty provided the copyright notice +# and this notice are preserved. This file is offered as-is, without any +# warranty. + +#serial 11 + + +DX_ENV="" +AC_DEFUN([DX_FEATURE_doc], ON) +AC_DEFUN([DX_FEATURE_dot], OFF) +AC_DEFUN([DX_FEATURE_man], OFF) +AC_DEFUN([DX_FEATURE_html], ON) +AC_DEFUN([DX_FEATURE_chm], OFF) +AC_DEFUN([DX_FEATURE_chi], OFF) +AC_DEFUN([DX_FEATURE_rtf], OFF) +AC_DEFUN([DX_FEATURE_xml], OFF) +AC_DEFUN([DX_FEATURE_pdf], ON) +AC_DEFUN([DX_FEATURE_ps], ON) + + +# DX_ENV_APPEND(VARIABLE, VALUE) +# ------------------------------ +# Append VARIABLE="VALUE" to DX_ENV for invoking doxygen. +AC_DEFUN([DX_ENV_APPEND], [AC_SUBST([DX_ENV], ["$DX_ENV $1='$2'"])]) + +# DX_DIRNAME_EXPR +# --------------- +# Expand into a shell expression prints the directory part of a path. +AC_DEFUN([DX_DIRNAME_EXPR], + [[expr ".$1" : '\(\.\)[^/]*$' \| "x$1" : 'x\(.*\)/[^/]*$']]) + +# DX_IF_FEATURE(FEATURE, IF-ON, IF-OFF) +# ------------------------------------- +# Expands according to the M4 (static) status of the feature. +AC_DEFUN([DX_IF_FEATURE], [ifelse(DX_FEATURE_$1, ON, [$2], [$3])]) + +# DX_REQUIRE_PROG(VARIABLE, PROGRAM) +# ---------------------------------- +# Require the specified program to be found for the DX_CURRENT_FEATURE to work. +AC_DEFUN([DX_REQUIRE_PROG], [ +AC_PATH_TOOL([$1], [$2]) +if test "$DX_FLAG_[]DX_CURRENT_FEATURE$$1" = 1; then + AC_MSG_WARN([$2 not found - will not DX_CURRENT_DESCRIPTION]) + AC_SUBST(DX_FLAG_[]DX_CURRENT_FEATURE, 0) +fi +]) + +# DX_TEST_FEATURE(FEATURE) +# ------------------------ +# Expand to a shell expression testing whether the feature is active. +AC_DEFUN([DX_TEST_FEATURE], [test "$DX_FLAG_$1" = 1]) + +# DX_CHECK_DEPEND(REQUIRED_FEATURE, REQUIRED_STATE) +# ------------------------------------------------- +# Verify that a required features has the right state before trying to turn on +# the DX_CURRENT_FEATURE. +AC_DEFUN([DX_CHECK_DEPEND], [ +test "$DX_FLAG_$1" = "$2" \ +|| AC_MSG_ERROR([doxygen-DX_CURRENT_FEATURE ifelse([$2], 1, + requires, contradicts) doxygen-DX_CURRENT_FEATURE]) +]) + +# DX_CLEAR_DEPEND(FEATURE, REQUIRED_FEATURE, REQUIRED_STATE) +# ---------------------------------------------------------- +# Turn off the DX_CURRENT_FEATURE if the required feature is off. +AC_DEFUN([DX_CLEAR_DEPEND], [ +test "$DX_FLAG_$1" = "$2" || AC_SUBST(DX_FLAG_[]DX_CURRENT_FEATURE, 0) +]) + +# DX_FEATURE_ARG(FEATURE, DESCRIPTION, +# CHECK_DEPEND, CLEAR_DEPEND, +# REQUIRE, DO-IF-ON, DO-IF-OFF) +# -------------------------------------------- +# Parse the command-line option controlling a feature. CHECK_DEPEND is called +# if the user explicitly turns the feature on (and invokes DX_CHECK_DEPEND), +# otherwise CLEAR_DEPEND is called to turn off the default state if a required +# feature is disabled (using DX_CLEAR_DEPEND). REQUIRE performs additional +# requirement tests (DX_REQUIRE_PROG). Finally, an automake flag is set and +# DO-IF-ON or DO-IF-OFF are called according to the final state of the feature. +AC_DEFUN([DX_ARG_ABLE], [ + AC_DEFUN([DX_CURRENT_FEATURE], [$1]) + AC_DEFUN([DX_CURRENT_DESCRIPTION], [$2]) + AC_ARG_ENABLE(doxygen-$1, + [AS_HELP_STRING(DX_IF_FEATURE([$1], [--disable-doxygen-$1], + [--enable-doxygen-$1]), + DX_IF_FEATURE([$1], [don't $2], [$2]))], + [ +case "$enableval" in +#( +y|Y|yes|Yes|YES) + AC_SUBST([DX_FLAG_$1], 1) + $3 +;; #( +n|N|no|No|NO) + AC_SUBST([DX_FLAG_$1], 0) +;; #( +*) + AC_MSG_ERROR([invalid value '$enableval' given to doxygen-$1]) +;; +esac +], [ +AC_SUBST([DX_FLAG_$1], [DX_IF_FEATURE([$1], 1, 0)]) +$4 +]) +if DX_TEST_FEATURE([$1]); then + $5 + : +fi +if DX_TEST_FEATURE([$1]); then + AM_CONDITIONAL(DX_COND_$1, :) + $6 + : +else + AM_CONDITIONAL(DX_COND_$1, false) + $7 + : +fi +]) + + +# DX_XXX_FEATURE(DEFAULT_STATE) +# ----------------------------- +AC_DEFUN([DX_DOXYGEN_FEATURE], [AC_DEFUN([DX_FEATURE_doc], [$1])]) +AC_DEFUN([DX_DOT_FEATURE], [AC_DEFUN([DX_FEATURE_dot], [$1])]) +AC_DEFUN([DX_MAN_FEATURE], [AC_DEFUN([DX_FEATURE_man], [$1])]) +AC_DEFUN([DX_HTML_FEATURE], [AC_DEFUN([DX_FEATURE_html], [$1])]) +AC_DEFUN([DX_CHM_FEATURE], [AC_DEFUN([DX_FEATURE_chm], [$1])]) +AC_DEFUN([DX_CHI_FEATURE], [AC_DEFUN([DX_FEATURE_chi], [$1])]) +AC_DEFUN([DX_RTF_FEATURE], [AC_DEFUN([DX_FEATURE_rtf], [$1])]) +AC_DEFUN([DX_XML_FEATURE], [AC_DEFUN([DX_FEATURE_xml], [$1])]) +AC_DEFUN([DX_XML_FEATURE], [AC_DEFUN([DX_FEATURE_xml], [$1])]) +AC_DEFUN([DX_PDF_FEATURE], [AC_DEFUN([DX_FEATURE_pdf], [$1])]) +AC_DEFUN([DX_PS_FEATURE], [AC_DEFUN([DX_FEATURE_ps], [$1])]) + +# DX_INIT_DOXYGEN(PROJECT, [CONFIG-FILE], [OUTPUT-DOC-DIR]) +# --------------------------------------------------------- +# PROJECT also serves as the base name for the documentation files. +# The default CONFIG-FILE is "Doxyfile" and OUTPUT-DOC-DIR is "doxygen-doc". +AC_DEFUN([DX_INIT_DOXYGEN], [ + +# Files: +AC_SUBST([DX_PROJECT], [$1]) +AC_SUBST([DX_CONFIG], [ifelse([$2], [], Doxyfile, [$2])]) +AC_SUBST([DX_DOCDIR], [ifelse([$3], [], doxygen-doc, [$3])]) + +# Environment variables used inside doxygen.cfg: +DX_ENV_APPEND(SRCDIR, $srcdir) +DX_ENV_APPEND(PROJECT, $DX_PROJECT) +DX_ENV_APPEND(DOCDIR, $DX_DOCDIR) +DX_ENV_APPEND(VERSION, $PACKAGE_VERSION) + +# Doxygen itself: +DX_ARG_ABLE(doc, [generate any doxygen documentation], + [], + [], + [DX_REQUIRE_PROG([DX_DOXYGEN], doxygen) + DX_REQUIRE_PROG([DX_PERL], perl)], + [DX_ENV_APPEND(PERL_PATH, $DX_PERL)]) + +# Dot for graphics: +DX_ARG_ABLE(dot, [generate graphics for doxygen documentation], + [DX_CHECK_DEPEND(doc, 1)], + [DX_CLEAR_DEPEND(doc, 1)], + [DX_REQUIRE_PROG([DX_DOT], dot)], + [DX_ENV_APPEND(HAVE_DOT, YES) + DX_ENV_APPEND(DOT_PATH, [`DX_DIRNAME_EXPR($DX_DOT)`])], + [DX_ENV_APPEND(HAVE_DOT, NO)]) + +# Man pages generation: +DX_ARG_ABLE(man, [generate doxygen manual pages], + [DX_CHECK_DEPEND(doc, 1)], + [DX_CLEAR_DEPEND(doc, 1)], + [], + [DX_ENV_APPEND(GENERATE_MAN, YES)], + [DX_ENV_APPEND(GENERATE_MAN, NO)]) + +# RTF file generation: +DX_ARG_ABLE(rtf, [generate doxygen RTF documentation], + [DX_CHECK_DEPEND(doc, 1)], + [DX_CLEAR_DEPEND(doc, 1)], + [], + [DX_ENV_APPEND(GENERATE_RTF, YES)], + [DX_ENV_APPEND(GENERATE_RTF, NO)]) + +# XML file generation: +DX_ARG_ABLE(xml, [generate doxygen XML documentation], + [DX_CHECK_DEPEND(doc, 1)], + [DX_CLEAR_DEPEND(doc, 1)], + [], + [DX_ENV_APPEND(GENERATE_XML, YES)], + [DX_ENV_APPEND(GENERATE_XML, NO)]) + +# (Compressed) HTML help generation: +DX_ARG_ABLE(chm, [generate doxygen compressed HTML help documentation], + [DX_CHECK_DEPEND(doc, 1)], + [DX_CLEAR_DEPEND(doc, 1)], + [DX_REQUIRE_PROG([DX_HHC], hhc)], + [DX_ENV_APPEND(HHC_PATH, $DX_HHC) + DX_ENV_APPEND(GENERATE_HTML, YES) + DX_ENV_APPEND(GENERATE_HTMLHELP, YES)], + [DX_ENV_APPEND(GENERATE_HTMLHELP, NO)]) + +# Seperate CHI file generation. +DX_ARG_ABLE(chi, [generate doxygen seperate compressed HTML help index file], + [DX_CHECK_DEPEND(chm, 1)], + [DX_CLEAR_DEPEND(chm, 1)], + [], + [DX_ENV_APPEND(GENERATE_CHI, YES)], + [DX_ENV_APPEND(GENERATE_CHI, NO)]) + +# Plain HTML pages generation: +DX_ARG_ABLE(html, [generate doxygen plain HTML documentation], + [DX_CHECK_DEPEND(doc, 1) DX_CHECK_DEPEND(chm, 0)], + [DX_CLEAR_DEPEND(doc, 1) DX_CLEAR_DEPEND(chm, 0)], + [], + [DX_ENV_APPEND(GENERATE_HTML, YES)], + [DX_TEST_FEATURE(chm) || DX_ENV_APPEND(GENERATE_HTML, NO)]) + +# PostScript file generation: +DX_ARG_ABLE(ps, [generate doxygen PostScript documentation], + [DX_CHECK_DEPEND(doc, 1)], + [DX_CLEAR_DEPEND(doc, 1)], + [DX_REQUIRE_PROG([DX_LATEX], latex) + DX_REQUIRE_PROG([DX_MAKEINDEX], makeindex) + DX_REQUIRE_PROG([DX_DVIPS], dvips) + DX_REQUIRE_PROG([DX_EGREP], egrep)]) + +# PDF file generation: +DX_ARG_ABLE(pdf, [generate doxygen PDF documentation], + [DX_CHECK_DEPEND(doc, 1)], + [DX_CLEAR_DEPEND(doc, 1)], + [DX_REQUIRE_PROG([DX_PDFLATEX], pdflatex) + DX_REQUIRE_PROG([DX_MAKEINDEX], makeindex) + DX_REQUIRE_PROG([DX_EGREP], egrep)]) + +# LaTeX generation for PS and/or PDF: +if DX_TEST_FEATURE(ps) || DX_TEST_FEATURE(pdf); then + AM_CONDITIONAL(DX_COND_latex, :) + DX_ENV_APPEND(GENERATE_LATEX, YES) +else + AM_CONDITIONAL(DX_COND_latex, false) + DX_ENV_APPEND(GENERATE_LATEX, NO) +fi + +# Paper size for PS and/or PDF: +AC_ARG_VAR(DOXYGEN_PAPER_SIZE, + [a4wide (default), a4, letter, legal or executive]) +case "$DOXYGEN_PAPER_SIZE" in +#( +"") + AC_SUBST(DOXYGEN_PAPER_SIZE, "") +;; #( +a4wide|a4|letter|legal|executive) + DX_ENV_APPEND(PAPER_SIZE, $DOXYGEN_PAPER_SIZE) +;; #( +*) + AC_MSG_ERROR([unknown DOXYGEN_PAPER_SIZE='$DOXYGEN_PAPER_SIZE']) +;; +esac + +#For debugging: +#echo DX_FLAG_doc=$DX_FLAG_doc +#echo DX_FLAG_dot=$DX_FLAG_dot +#echo DX_FLAG_man=$DX_FLAG_man +#echo DX_FLAG_html=$DX_FLAG_html +#echo DX_FLAG_chm=$DX_FLAG_chm +#echo DX_FLAG_chi=$DX_FLAG_chi +#echo DX_FLAG_rtf=$DX_FLAG_rtf +#echo DX_FLAG_xml=$DX_FLAG_xml +#echo DX_FLAG_pdf=$DX_FLAG_pdf +#echo DX_FLAG_ps=$DX_FLAG_ps +#echo DX_ENV=$DX_ENV +]) + +# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*- +# +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, +# 2006, 2007, 2008, 2009, 2010 Free Software Foundation, +# Inc. +# Written by Gordon Matzigkeit, 1996 +# +# This file is free software; the Free Software Foundation gives +# unlimited permission to copy and/or distribute it, with or without +# modifications, as long as this notice is preserved. + +m4_define([_LT_COPYING], [dnl +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, +# 2006, 2007, 2008, 2009, 2010 Free Software Foundation, +# Inc. +# Written by Gordon Matzigkeit, 1996 +# +# This file is part of GNU Libtool. +# +# GNU Libtool is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# As a special exception to the GNU General Public License, +# if you distribute this file as part of a program or library that +# is built using GNU Libtool, you may include this file under the +# same distribution terms that you use for the rest of that program. +# +# GNU Libtool is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with GNU Libtool; see the file COPYING. If not, a copy +# can be downloaded from http://www.gnu.org/licenses/gpl.html, or +# obtained by writing to the Free Software Foundation, Inc., +# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. +]) + +# serial 57 LT_INIT + + +# LT_PREREQ(VERSION) +# ------------------ +# Complain and exit if this libtool version is less that VERSION. +m4_defun([LT_PREREQ], +[m4_if(m4_version_compare(m4_defn([LT_PACKAGE_VERSION]), [$1]), -1, + [m4_default([$3], + [m4_fatal([Libtool version $1 or higher is required], + 63)])], + [$2])]) + + +# _LT_CHECK_BUILDDIR +# ------------------ +# Complain if the absolute build directory name contains unusual characters +m4_defun([_LT_CHECK_BUILDDIR], +[case `pwd` in + *\ * | *\ *) + AC_MSG_WARN([Libtool does not cope well with whitespace in `pwd`]) ;; +esac +]) + + +# LT_INIT([OPTIONS]) +# ------------------ +AC_DEFUN([LT_INIT], +[AC_PREREQ([2.58])dnl We use AC_INCLUDES_DEFAULT +AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl +AC_BEFORE([$0], [LT_LANG])dnl +AC_BEFORE([$0], [LT_OUTPUT])dnl +AC_BEFORE([$0], [LTDL_INIT])dnl +m4_require([_LT_CHECK_BUILDDIR])dnl + +dnl Autoconf doesn't catch unexpanded LT_ macros by default: +m4_pattern_forbid([^_?LT_[A-Z_]+$])dnl +m4_pattern_allow([^(_LT_EOF|LT_DLGLOBAL|LT_DLLAZY_OR_NOW|LT_MULTI_MODULE)$])dnl +dnl aclocal doesn't pull ltoptions.m4, ltsugar.m4, or ltversion.m4 +dnl unless we require an AC_DEFUNed macro: +AC_REQUIRE([LTOPTIONS_VERSION])dnl +AC_REQUIRE([LTSUGAR_VERSION])dnl +AC_REQUIRE([LTVERSION_VERSION])dnl +AC_REQUIRE([LTOBSOLETE_VERSION])dnl +m4_require([_LT_PROG_LTMAIN])dnl + +_LT_SHELL_INIT([SHELL=${CONFIG_SHELL-/bin/sh}]) + +dnl Parse OPTIONS +_LT_SET_OPTIONS([$0], [$1]) + +# This can be used to rebuild libtool when needed +LIBTOOL_DEPS="$ltmain" + +# Always use our own libtool. +LIBTOOL='$(SHELL) $(top_builddir)/libtool' +AC_SUBST(LIBTOOL)dnl + +_LT_SETUP + +# Only expand once: +m4_define([LT_INIT]) +])# LT_INIT + +# Old names: +AU_ALIAS([AC_PROG_LIBTOOL], [LT_INIT]) +AU_ALIAS([AM_PROG_LIBTOOL], [LT_INIT]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_PROG_LIBTOOL], []) +dnl AC_DEFUN([AM_PROG_LIBTOOL], []) + + +# _LT_CC_BASENAME(CC) +# ------------------- +# Calculate cc_basename. Skip known compiler wrappers and cross-prefix. +m4_defun([_LT_CC_BASENAME], +[for cc_temp in $1""; do + case $cc_temp in + compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;; + distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;; + \-*) ;; + *) break;; + esac +done +cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"` +]) + + +# _LT_FILEUTILS_DEFAULTS +# ---------------------- +# It is okay to use these file commands and assume they have been set +# sensibly after `m4_require([_LT_FILEUTILS_DEFAULTS])'. +m4_defun([_LT_FILEUTILS_DEFAULTS], +[: ${CP="cp -f"} +: ${MV="mv -f"} +: ${RM="rm -f"} +])# _LT_FILEUTILS_DEFAULTS + + +# _LT_SETUP +# --------- +m4_defun([_LT_SETUP], +[AC_REQUIRE([AC_CANONICAL_HOST])dnl +AC_REQUIRE([AC_CANONICAL_BUILD])dnl +AC_REQUIRE([_LT_PREPARE_SED_QUOTE_VARS])dnl +AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])dnl + +_LT_DECL([], [host_alias], [0], [The host system])dnl +_LT_DECL([], [host], [0])dnl +_LT_DECL([], [host_os], [0])dnl +dnl +_LT_DECL([], [build_alias], [0], [The build system])dnl +_LT_DECL([], [build], [0])dnl +_LT_DECL([], [build_os], [0])dnl +dnl +AC_REQUIRE([AC_PROG_CC])dnl +AC_REQUIRE([LT_PATH_LD])dnl +AC_REQUIRE([LT_PATH_NM])dnl +dnl +AC_REQUIRE([AC_PROG_LN_S])dnl +test -z "$LN_S" && LN_S="ln -s" +_LT_DECL([], [LN_S], [1], [Whether we need soft or hard links])dnl +dnl +AC_REQUIRE([LT_CMD_MAX_LEN])dnl +_LT_DECL([objext], [ac_objext], [0], [Object file suffix (normally "o")])dnl +_LT_DECL([], [exeext], [0], [Executable file suffix (normally "")])dnl +dnl +m4_require([_LT_FILEUTILS_DEFAULTS])dnl +m4_require([_LT_CHECK_SHELL_FEATURES])dnl +m4_require([_LT_PATH_CONVERSION_FUNCTIONS])dnl +m4_require([_LT_CMD_RELOAD])dnl +m4_require([_LT_CHECK_MAGIC_METHOD])dnl +m4_require([_LT_CHECK_SHAREDLIB_FROM_LINKLIB])dnl +m4_require([_LT_CMD_OLD_ARCHIVE])dnl +m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl +m4_require([_LT_WITH_SYSROOT])dnl + +_LT_CONFIG_LIBTOOL_INIT([ +# See if we are running on zsh, and set the options which allow our +# commands through without removal of \ escapes INIT. +if test -n "\${ZSH_VERSION+set}" ; then + setopt NO_GLOB_SUBST +fi +]) +if test -n "${ZSH_VERSION+set}" ; then + setopt NO_GLOB_SUBST +fi + +_LT_CHECK_OBJDIR + +m4_require([_LT_TAG_COMPILER])dnl + +case $host_os in +aix3*) + # AIX sometimes has problems with the GCC collect2 program. For some + # reason, if we set the COLLECT_NAMES environment variable, the problems + # vanish in a puff of smoke. + if test "X${COLLECT_NAMES+set}" != Xset; then + COLLECT_NAMES= + export COLLECT_NAMES + fi + ;; +esac + +# Global variables: +ofile=libtool +can_build_shared=yes + +# All known linkers require a `.a' archive for static linking (except MSVC, +# which needs '.lib'). +libext=a + +with_gnu_ld="$lt_cv_prog_gnu_ld" + +old_CC="$CC" +old_CFLAGS="$CFLAGS" + +# Set sane defaults for various variables +test -z "$CC" && CC=cc +test -z "$LTCC" && LTCC=$CC +test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS +test -z "$LD" && LD=ld +test -z "$ac_objext" && ac_objext=o + +_LT_CC_BASENAME([$compiler]) + +# Only perform the check for file, if the check method requires it +test -z "$MAGIC_CMD" && MAGIC_CMD=file +case $deplibs_check_method in +file_magic*) + if test "$file_magic_cmd" = '$MAGIC_CMD'; then + _LT_PATH_MAGIC + fi + ;; +esac + +# Use C for the default configuration in the libtool script +LT_SUPPORTED_TAG([CC]) +_LT_LANG_C_CONFIG +_LT_LANG_DEFAULT_CONFIG +_LT_CONFIG_COMMANDS +])# _LT_SETUP + + +# _LT_PREPARE_SED_QUOTE_VARS +# -------------------------- +# Define a few sed substitution that help us do robust quoting. +m4_defun([_LT_PREPARE_SED_QUOTE_VARS], +[# Backslashify metacharacters that are still active within +# double-quoted strings. +sed_quote_subst='s/\([["`$\\]]\)/\\\1/g' + +# Same as above, but do not quote variable references. +double_quote_subst='s/\([["`\\]]\)/\\\1/g' + +# Sed substitution to delay expansion of an escaped shell variable in a +# double_quote_subst'ed string. +delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' + +# Sed substitution to delay expansion of an escaped single quote. +delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g' + +# Sed substitution to avoid accidental globbing in evaled expressions +no_glob_subst='s/\*/\\\*/g' +]) + +# _LT_PROG_LTMAIN +# --------------- +# Note that this code is called both from `configure', and `config.status' +# now that we use AC_CONFIG_COMMANDS to generate libtool. Notably, +# `config.status' has no value for ac_aux_dir unless we are using Automake, +# so we pass a copy along to make sure it has a sensible value anyway. +m4_defun([_LT_PROG_LTMAIN], +[m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([ltmain.sh])])dnl +_LT_CONFIG_LIBTOOL_INIT([ac_aux_dir='$ac_aux_dir']) +ltmain="$ac_aux_dir/ltmain.sh" +])# _LT_PROG_LTMAIN + + + +# So that we can recreate a full libtool script including additional +# tags, we accumulate the chunks of code to send to AC_CONFIG_COMMANDS +# in macros and then make a single call at the end using the `libtool' +# label. + + +# _LT_CONFIG_LIBTOOL_INIT([INIT-COMMANDS]) +# ---------------------------------------- +# Register INIT-COMMANDS to be passed to AC_CONFIG_COMMANDS later. +m4_define([_LT_CONFIG_LIBTOOL_INIT], +[m4_ifval([$1], + [m4_append([_LT_OUTPUT_LIBTOOL_INIT], + [$1 +])])]) + +# Initialize. +m4_define([_LT_OUTPUT_LIBTOOL_INIT]) + + +# _LT_CONFIG_LIBTOOL([COMMANDS]) +# ------------------------------ +# Register COMMANDS to be passed to AC_CONFIG_COMMANDS later. +m4_define([_LT_CONFIG_LIBTOOL], +[m4_ifval([$1], + [m4_append([_LT_OUTPUT_LIBTOOL_COMMANDS], + [$1 +])])]) + +# Initialize. +m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS]) + + +# _LT_CONFIG_SAVE_COMMANDS([COMMANDS], [INIT_COMMANDS]) +# ----------------------------------------------------- +m4_defun([_LT_CONFIG_SAVE_COMMANDS], +[_LT_CONFIG_LIBTOOL([$1]) +_LT_CONFIG_LIBTOOL_INIT([$2]) +]) + + +# _LT_FORMAT_COMMENT([COMMENT]) +# ----------------------------- +# Add leading comment marks to the start of each line, and a trailing +# full-stop to the whole comment if one is not present already. +m4_define([_LT_FORMAT_COMMENT], +[m4_ifval([$1], [ +m4_bpatsubst([m4_bpatsubst([$1], [^ *], [# ])], + [['`$\]], [\\\&])]m4_bmatch([$1], [[!?.]$], [], [.]) +)]) + + + + + +# _LT_DECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION], [IS-TAGGED?]) +# ------------------------------------------------------------------- +# CONFIGNAME is the name given to the value in the libtool script. +# VARNAME is the (base) name used in the configure script. +# VALUE may be 0, 1 or 2 for a computed quote escaped value based on +# VARNAME. Any other value will be used directly. +m4_define([_LT_DECL], +[lt_if_append_uniq([lt_decl_varnames], [$2], [, ], + [lt_dict_add_subkey([lt_decl_dict], [$2], [libtool_name], + [m4_ifval([$1], [$1], [$2])]) + lt_dict_add_subkey([lt_decl_dict], [$2], [value], [$3]) + m4_ifval([$4], + [lt_dict_add_subkey([lt_decl_dict], [$2], [description], [$4])]) + lt_dict_add_subkey([lt_decl_dict], [$2], + [tagged?], [m4_ifval([$5], [yes], [no])])]) +]) + + +# _LT_TAGDECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION]) +# -------------------------------------------------------- +m4_define([_LT_TAGDECL], [_LT_DECL([$1], [$2], [$3], [$4], [yes])]) + + +# lt_decl_tag_varnames([SEPARATOR], [VARNAME1...]) +# ------------------------------------------------ +m4_define([lt_decl_tag_varnames], +[_lt_decl_filter([tagged?], [yes], $@)]) + + +# _lt_decl_filter(SUBKEY, VALUE, [SEPARATOR], [VARNAME1..]) +# --------------------------------------------------------- +m4_define([_lt_decl_filter], +[m4_case([$#], + [0], [m4_fatal([$0: too few arguments: $#])], + [1], [m4_fatal([$0: too few arguments: $#: $1])], + [2], [lt_dict_filter([lt_decl_dict], [$1], [$2], [], lt_decl_varnames)], + [3], [lt_dict_filter([lt_decl_dict], [$1], [$2], [$3], lt_decl_varnames)], + [lt_dict_filter([lt_decl_dict], $@)])[]dnl +]) + + +# lt_decl_quote_varnames([SEPARATOR], [VARNAME1...]) +# -------------------------------------------------- +m4_define([lt_decl_quote_varnames], +[_lt_decl_filter([value], [1], $@)]) + + +# lt_decl_dquote_varnames([SEPARATOR], [VARNAME1...]) +# --------------------------------------------------- +m4_define([lt_decl_dquote_varnames], +[_lt_decl_filter([value], [2], $@)]) + + +# lt_decl_varnames_tagged([SEPARATOR], [VARNAME1...]) +# --------------------------------------------------- +m4_define([lt_decl_varnames_tagged], +[m4_assert([$# <= 2])dnl +_$0(m4_quote(m4_default([$1], [[, ]])), + m4_ifval([$2], [[$2]], [m4_dquote(lt_decl_tag_varnames)]), + m4_split(m4_normalize(m4_quote(_LT_TAGS)), [ ]))]) +m4_define([_lt_decl_varnames_tagged], +[m4_ifval([$3], [lt_combine([$1], [$2], [_], $3)])]) + + +# lt_decl_all_varnames([SEPARATOR], [VARNAME1...]) +# ------------------------------------------------ +m4_define([lt_decl_all_varnames], +[_$0(m4_quote(m4_default([$1], [[, ]])), + m4_if([$2], [], + m4_quote(lt_decl_varnames), + m4_quote(m4_shift($@))))[]dnl +]) +m4_define([_lt_decl_all_varnames], +[lt_join($@, lt_decl_varnames_tagged([$1], + lt_decl_tag_varnames([[, ]], m4_shift($@))))dnl +]) + + +# _LT_CONFIG_STATUS_DECLARE([VARNAME]) +# ------------------------------------ +# Quote a variable value, and forward it to `config.status' so that its +# declaration there will have the same value as in `configure'. VARNAME +# must have a single quote delimited value for this to work. +m4_define([_LT_CONFIG_STATUS_DECLARE], +[$1='`$ECHO "$][$1" | $SED "$delay_single_quote_subst"`']) + + +# _LT_CONFIG_STATUS_DECLARATIONS +# ------------------------------ +# We delimit libtool config variables with single quotes, so when +# we write them to config.status, we have to be sure to quote all +# embedded single quotes properly. In configure, this macro expands +# each variable declared with _LT_DECL (and _LT_TAGDECL) into: +# +# ='`$ECHO "$" | $SED "$delay_single_quote_subst"`' +m4_defun([_LT_CONFIG_STATUS_DECLARATIONS], +[m4_foreach([_lt_var], m4_quote(lt_decl_all_varnames), + [m4_n([_LT_CONFIG_STATUS_DECLARE(_lt_var)])])]) + + +# _LT_LIBTOOL_TAGS +# ---------------- +# Output comment and list of tags supported by the script +m4_defun([_LT_LIBTOOL_TAGS], +[_LT_FORMAT_COMMENT([The names of the tagged configurations supported by this script])dnl +available_tags="_LT_TAGS"dnl +]) + + +# _LT_LIBTOOL_DECLARE(VARNAME, [TAG]) +# ----------------------------------- +# Extract the dictionary values for VARNAME (optionally with TAG) and +# expand to a commented shell variable setting: +# +# # Some comment about what VAR is for. +# visible_name=$lt_internal_name +m4_define([_LT_LIBTOOL_DECLARE], +[_LT_FORMAT_COMMENT(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], + [description])))[]dnl +m4_pushdef([_libtool_name], + m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [libtool_name])))[]dnl +m4_case(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [value])), + [0], [_libtool_name=[$]$1], + [1], [_libtool_name=$lt_[]$1], + [2], [_libtool_name=$lt_[]$1], + [_libtool_name=lt_dict_fetch([lt_decl_dict], [$1], [value])])[]dnl +m4_ifval([$2], [_$2])[]m4_popdef([_libtool_name])[]dnl +]) + + +# _LT_LIBTOOL_CONFIG_VARS +# ----------------------- +# Produce commented declarations of non-tagged libtool config variables +# suitable for insertion in the LIBTOOL CONFIG section of the `libtool' +# script. Tagged libtool config variables (even for the LIBTOOL CONFIG +# section) are produced by _LT_LIBTOOL_TAG_VARS. +m4_defun([_LT_LIBTOOL_CONFIG_VARS], +[m4_foreach([_lt_var], + m4_quote(_lt_decl_filter([tagged?], [no], [], lt_decl_varnames)), + [m4_n([_LT_LIBTOOL_DECLARE(_lt_var)])])]) + + +# _LT_LIBTOOL_TAG_VARS(TAG) +# ------------------------- +m4_define([_LT_LIBTOOL_TAG_VARS], +[m4_foreach([_lt_var], m4_quote(lt_decl_tag_varnames), + [m4_n([_LT_LIBTOOL_DECLARE(_lt_var, [$1])])])]) + + +# _LT_TAGVAR(VARNAME, [TAGNAME]) +# ------------------------------ +m4_define([_LT_TAGVAR], [m4_ifval([$2], [$1_$2], [$1])]) + + +# _LT_CONFIG_COMMANDS +# ------------------- +# Send accumulated output to $CONFIG_STATUS. Thanks to the lists of +# variables for single and double quote escaping we saved from calls +# to _LT_DECL, we can put quote escaped variables declarations +# into `config.status', and then the shell code to quote escape them in +# for loops in `config.status'. Finally, any additional code accumulated +# from calls to _LT_CONFIG_LIBTOOL_INIT is expanded. +m4_defun([_LT_CONFIG_COMMANDS], +[AC_PROVIDE_IFELSE([LT_OUTPUT], + dnl If the libtool generation code has been placed in $CONFIG_LT, + dnl instead of duplicating it all over again into config.status, + dnl then we will have config.status run $CONFIG_LT later, so it + dnl needs to know what name is stored there: + [AC_CONFIG_COMMANDS([libtool], + [$SHELL $CONFIG_LT || AS_EXIT(1)], [CONFIG_LT='$CONFIG_LT'])], + dnl If the libtool generation code is destined for config.status, + dnl expand the accumulated commands and init code now: + [AC_CONFIG_COMMANDS([libtool], + [_LT_OUTPUT_LIBTOOL_COMMANDS], [_LT_OUTPUT_LIBTOOL_COMMANDS_INIT])]) +])#_LT_CONFIG_COMMANDS + + +# Initialize. +m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS_INIT], +[ + +# The HP-UX ksh and POSIX shell print the target directory to stdout +# if CDPATH is set. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + +sed_quote_subst='$sed_quote_subst' +double_quote_subst='$double_quote_subst' +delay_variable_subst='$delay_variable_subst' +_LT_CONFIG_STATUS_DECLARATIONS +LTCC='$LTCC' +LTCFLAGS='$LTCFLAGS' +compiler='$compiler_DEFAULT' + +# A function that is used when there is no print builtin or printf. +func_fallback_echo () +{ + eval 'cat <<_LTECHO_EOF +\$[]1 +_LTECHO_EOF' +} + +# Quote evaled strings. +for var in lt_decl_all_varnames([[ \ +]], lt_decl_quote_varnames); do + case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in + *[[\\\\\\\`\\"\\\$]]*) + eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" + ;; + *) + eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" + ;; + esac +done + +# Double-quote double-evaled strings. +for var in lt_decl_all_varnames([[ \ +]], lt_decl_dquote_varnames); do + case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in + *[[\\\\\\\`\\"\\\$]]*) + eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" + ;; + *) + eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" + ;; + esac +done + +_LT_OUTPUT_LIBTOOL_INIT +]) + +# _LT_GENERATED_FILE_INIT(FILE, [COMMENT]) +# ------------------------------------ +# Generate a child script FILE with all initialization necessary to +# reuse the environment learned by the parent script, and make the +# file executable. If COMMENT is supplied, it is inserted after the +# `#!' sequence but before initialization text begins. After this +# macro, additional text can be appended to FILE to form the body of +# the child script. The macro ends with non-zero status if the +# file could not be fully written (such as if the disk is full). +m4_ifdef([AS_INIT_GENERATED], +[m4_defun([_LT_GENERATED_FILE_INIT],[AS_INIT_GENERATED($@)])], +[m4_defun([_LT_GENERATED_FILE_INIT], +[m4_require([AS_PREPARE])]dnl +[m4_pushdef([AS_MESSAGE_LOG_FD])]dnl +[lt_write_fail=0 +cat >$1 <<_ASEOF || lt_write_fail=1 +#! $SHELL +# Generated by $as_me. +$2 +SHELL=\${CONFIG_SHELL-$SHELL} +export SHELL +_ASEOF +cat >>$1 <<\_ASEOF || lt_write_fail=1 +AS_SHELL_SANITIZE +_AS_PREPARE +exec AS_MESSAGE_FD>&1 +_ASEOF +test $lt_write_fail = 0 && chmod +x $1[]dnl +m4_popdef([AS_MESSAGE_LOG_FD])])])# _LT_GENERATED_FILE_INIT + +# LT_OUTPUT +# --------- +# This macro allows early generation of the libtool script (before +# AC_OUTPUT is called), incase it is used in configure for compilation +# tests. +AC_DEFUN([LT_OUTPUT], +[: ${CONFIG_LT=./config.lt} +AC_MSG_NOTICE([creating $CONFIG_LT]) +_LT_GENERATED_FILE_INIT(["$CONFIG_LT"], +[# Run this file to recreate a libtool stub with the current configuration.]) + +cat >>"$CONFIG_LT" <<\_LTEOF +lt_cl_silent=false +exec AS_MESSAGE_LOG_FD>>config.log +{ + echo + AS_BOX([Running $as_me.]) +} >&AS_MESSAGE_LOG_FD + +lt_cl_help="\ +\`$as_me' creates a local libtool stub from the current configuration, +for use in further configure time tests before the real libtool is +generated. + +Usage: $[0] [[OPTIONS]] + + -h, --help print this help, then exit + -V, --version print version number, then exit + -q, --quiet do not print progress messages + -d, --debug don't remove temporary files + +Report bugs to ." + +lt_cl_version="\ +m4_ifset([AC_PACKAGE_NAME], [AC_PACKAGE_NAME ])config.lt[]dnl +m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION]) +configured by $[0], generated by m4_PACKAGE_STRING. + +Copyright (C) 2010 Free Software Foundation, Inc. +This config.lt script is free software; the Free Software Foundation +gives unlimited permision to copy, distribute and modify it." + +while test $[#] != 0 +do + case $[1] in + --version | --v* | -V ) + echo "$lt_cl_version"; exit 0 ;; + --help | --h* | -h ) + echo "$lt_cl_help"; exit 0 ;; + --debug | --d* | -d ) + debug=: ;; + --quiet | --q* | --silent | --s* | -q ) + lt_cl_silent=: ;; + + -*) AC_MSG_ERROR([unrecognized option: $[1] +Try \`$[0] --help' for more information.]) ;; + + *) AC_MSG_ERROR([unrecognized argument: $[1] +Try \`$[0] --help' for more information.]) ;; + esac + shift +done + +if $lt_cl_silent; then + exec AS_MESSAGE_FD>/dev/null +fi +_LTEOF + +cat >>"$CONFIG_LT" <<_LTEOF +_LT_OUTPUT_LIBTOOL_COMMANDS_INIT +_LTEOF + +cat >>"$CONFIG_LT" <<\_LTEOF +AC_MSG_NOTICE([creating $ofile]) +_LT_OUTPUT_LIBTOOL_COMMANDS +AS_EXIT(0) +_LTEOF +chmod +x "$CONFIG_LT" + +# configure is writing to config.log, but config.lt does its own redirection, +# appending to config.log, which fails on DOS, as config.log is still kept +# open by configure. Here we exec the FD to /dev/null, effectively closing +# config.log, so it can be properly (re)opened and appended to by config.lt. +lt_cl_success=: +test "$silent" = yes && + lt_config_lt_args="$lt_config_lt_args --quiet" +exec AS_MESSAGE_LOG_FD>/dev/null +$SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false +exec AS_MESSAGE_LOG_FD>>config.log +$lt_cl_success || AS_EXIT(1) +])# LT_OUTPUT + + +# _LT_CONFIG(TAG) +# --------------- +# If TAG is the built-in tag, create an initial libtool script with a +# default configuration from the untagged config vars. Otherwise add code +# to config.status for appending the configuration named by TAG from the +# matching tagged config vars. +m4_defun([_LT_CONFIG], +[m4_require([_LT_FILEUTILS_DEFAULTS])dnl +_LT_CONFIG_SAVE_COMMANDS([ + m4_define([_LT_TAG], m4_if([$1], [], [C], [$1]))dnl + m4_if(_LT_TAG, [C], [ + # See if we are running on zsh, and set the options which allow our + # commands through without removal of \ escapes. + if test -n "${ZSH_VERSION+set}" ; then + setopt NO_GLOB_SUBST + fi + + cfgfile="${ofile}T" + trap "$RM \"$cfgfile\"; exit 1" 1 2 15 + $RM "$cfgfile" + + cat <<_LT_EOF >> "$cfgfile" +#! $SHELL + +# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. +# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION +# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: +# NOTE: Changes made to this file will be lost: look at ltmain.sh. +# +_LT_COPYING +_LT_LIBTOOL_TAGS + +# ### BEGIN LIBTOOL CONFIG +_LT_LIBTOOL_CONFIG_VARS +_LT_LIBTOOL_TAG_VARS +# ### END LIBTOOL CONFIG + +_LT_EOF + + case $host_os in + aix3*) + cat <<\_LT_EOF >> "$cfgfile" +# AIX sometimes has problems with the GCC collect2 program. For some +# reason, if we set the COLLECT_NAMES environment variable, the problems +# vanish in a puff of smoke. +if test "X${COLLECT_NAMES+set}" != Xset; then + COLLECT_NAMES= + export COLLECT_NAMES +fi +_LT_EOF + ;; + esac + + _LT_PROG_LTMAIN + + # We use sed instead of cat because bash on DJGPP gets confused if + # if finds mixed CR/LF and LF-only lines. Since sed operates in + # text mode, it properly converts lines to CR/LF. This bash problem + # is reportedly fixed, but why not run on old versions too? + sed '$q' "$ltmain" >> "$cfgfile" \ + || (rm -f "$cfgfile"; exit 1) + + _LT_PROG_REPLACE_SHELLFNS + + mv -f "$cfgfile" "$ofile" || + (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") + chmod +x "$ofile" +], +[cat <<_LT_EOF >> "$ofile" + +dnl Unfortunately we have to use $1 here, since _LT_TAG is not expanded +dnl in a comment (ie after a #). +# ### BEGIN LIBTOOL TAG CONFIG: $1 +_LT_LIBTOOL_TAG_VARS(_LT_TAG) +# ### END LIBTOOL TAG CONFIG: $1 +_LT_EOF +])dnl /m4_if +], +[m4_if([$1], [], [ + PACKAGE='$PACKAGE' + VERSION='$VERSION' + TIMESTAMP='$TIMESTAMP' + RM='$RM' + ofile='$ofile'], []) +])dnl /_LT_CONFIG_SAVE_COMMANDS +])# _LT_CONFIG + + +# LT_SUPPORTED_TAG(TAG) +# --------------------- +# Trace this macro to discover what tags are supported by the libtool +# --tag option, using: +# autoconf --trace 'LT_SUPPORTED_TAG:$1' +AC_DEFUN([LT_SUPPORTED_TAG], []) + + +# C support is built-in for now +m4_define([_LT_LANG_C_enabled], []) +m4_define([_LT_TAGS], []) + + +# LT_LANG(LANG) +# ------------- +# Enable libtool support for the given language if not already enabled. +AC_DEFUN([LT_LANG], +[AC_BEFORE([$0], [LT_OUTPUT])dnl +m4_case([$1], + [C], [_LT_LANG(C)], + [C++], [_LT_LANG(CXX)], + [Java], [_LT_LANG(GCJ)], + [Fortran 77], [_LT_LANG(F77)], + [Fortran], [_LT_LANG(FC)], + [Windows Resource], [_LT_LANG(RC)], + [m4_ifdef([_LT_LANG_]$1[_CONFIG], + [_LT_LANG($1)], + [m4_fatal([$0: unsupported language: "$1"])])])dnl +])# LT_LANG + + +# _LT_LANG(LANGNAME) +# ------------------ +m4_defun([_LT_LANG], +[m4_ifdef([_LT_LANG_]$1[_enabled], [], + [LT_SUPPORTED_TAG([$1])dnl + m4_append([_LT_TAGS], [$1 ])dnl + m4_define([_LT_LANG_]$1[_enabled], [])dnl + _LT_LANG_$1_CONFIG($1)])dnl +])# _LT_LANG + + +# _LT_LANG_DEFAULT_CONFIG +# ----------------------- +m4_defun([_LT_LANG_DEFAULT_CONFIG], +[AC_PROVIDE_IFELSE([AC_PROG_CXX], + [LT_LANG(CXX)], + [m4_define([AC_PROG_CXX], defn([AC_PROG_CXX])[LT_LANG(CXX)])]) + +AC_PROVIDE_IFELSE([AC_PROG_F77], + [LT_LANG(F77)], + [m4_define([AC_PROG_F77], defn([AC_PROG_F77])[LT_LANG(F77)])]) + +AC_PROVIDE_IFELSE([AC_PROG_FC], + [LT_LANG(FC)], + [m4_define([AC_PROG_FC], defn([AC_PROG_FC])[LT_LANG(FC)])]) + +dnl The call to [A][M_PROG_GCJ] is quoted like that to stop aclocal +dnl pulling things in needlessly. +AC_PROVIDE_IFELSE([AC_PROG_GCJ], + [LT_LANG(GCJ)], + [AC_PROVIDE_IFELSE([A][M_PROG_GCJ], + [LT_LANG(GCJ)], + [AC_PROVIDE_IFELSE([LT_PROG_GCJ], + [LT_LANG(GCJ)], + [m4_ifdef([AC_PROG_GCJ], + [m4_define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[LT_LANG(GCJ)])]) + m4_ifdef([A][M_PROG_GCJ], + [m4_define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[LT_LANG(GCJ)])]) + m4_ifdef([LT_PROG_GCJ], + [m4_define([LT_PROG_GCJ], defn([LT_PROG_GCJ])[LT_LANG(GCJ)])])])])]) + +AC_PROVIDE_IFELSE([LT_PROG_RC], + [LT_LANG(RC)], + [m4_define([LT_PROG_RC], defn([LT_PROG_RC])[LT_LANG(RC)])]) +])# _LT_LANG_DEFAULT_CONFIG + +# Obsolete macros: +AU_DEFUN([AC_LIBTOOL_CXX], [LT_LANG(C++)]) +AU_DEFUN([AC_LIBTOOL_F77], [LT_LANG(Fortran 77)]) +AU_DEFUN([AC_LIBTOOL_FC], [LT_LANG(Fortran)]) +AU_DEFUN([AC_LIBTOOL_GCJ], [LT_LANG(Java)]) +AU_DEFUN([AC_LIBTOOL_RC], [LT_LANG(Windows Resource)]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_CXX], []) +dnl AC_DEFUN([AC_LIBTOOL_F77], []) +dnl AC_DEFUN([AC_LIBTOOL_FC], []) +dnl AC_DEFUN([AC_LIBTOOL_GCJ], []) +dnl AC_DEFUN([AC_LIBTOOL_RC], []) + + +# _LT_TAG_COMPILER +# ---------------- +m4_defun([_LT_TAG_COMPILER], +[AC_REQUIRE([AC_PROG_CC])dnl + +_LT_DECL([LTCC], [CC], [1], [A C compiler])dnl +_LT_DECL([LTCFLAGS], [CFLAGS], [1], [LTCC compiler flags])dnl +_LT_TAGDECL([CC], [compiler], [1], [A language specific compiler])dnl +_LT_TAGDECL([with_gcc], [GCC], [0], [Is the compiler the GNU compiler?])dnl + +# If no C compiler was specified, use CC. +LTCC=${LTCC-"$CC"} + +# If no C compiler flags were specified, use CFLAGS. +LTCFLAGS=${LTCFLAGS-"$CFLAGS"} + +# Allow CC to be a program name with arguments. +compiler=$CC +])# _LT_TAG_COMPILER + + +# _LT_COMPILER_BOILERPLATE +# ------------------------ +# Check for compiler boilerplate output or warnings with +# the simple compiler test code. +m4_defun([_LT_COMPILER_BOILERPLATE], +[m4_require([_LT_DECL_SED])dnl +ac_outfile=conftest.$ac_objext +echo "$lt_simple_compile_test_code" >conftest.$ac_ext +eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +_lt_compiler_boilerplate=`cat conftest.err` +$RM conftest* +])# _LT_COMPILER_BOILERPLATE + + +# _LT_LINKER_BOILERPLATE +# ---------------------- +# Check for linker boilerplate output or warnings with +# the simple link test code. +m4_defun([_LT_LINKER_BOILERPLATE], +[m4_require([_LT_DECL_SED])dnl +ac_outfile=conftest.$ac_objext +echo "$lt_simple_link_test_code" >conftest.$ac_ext +eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +_lt_linker_boilerplate=`cat conftest.err` +$RM -r conftest* +])# _LT_LINKER_BOILERPLATE + +# _LT_REQUIRED_DARWIN_CHECKS +# ------------------------- +m4_defun_once([_LT_REQUIRED_DARWIN_CHECKS],[ + case $host_os in + rhapsody* | darwin*) + AC_CHECK_TOOL([DSYMUTIL], [dsymutil], [:]) + AC_CHECK_TOOL([NMEDIT], [nmedit], [:]) + AC_CHECK_TOOL([LIPO], [lipo], [:]) + AC_CHECK_TOOL([OTOOL], [otool], [:]) + AC_CHECK_TOOL([OTOOL64], [otool64], [:]) + _LT_DECL([], [DSYMUTIL], [1], + [Tool to manipulate archived DWARF debug symbol files on Mac OS X]) + _LT_DECL([], [NMEDIT], [1], + [Tool to change global to local symbols on Mac OS X]) + _LT_DECL([], [LIPO], [1], + [Tool to manipulate fat objects and archives on Mac OS X]) + _LT_DECL([], [OTOOL], [1], + [ldd/readelf like tool for Mach-O binaries on Mac OS X]) + _LT_DECL([], [OTOOL64], [1], + [ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4]) + + AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod], + [lt_cv_apple_cc_single_mod=no + if test -z "${LT_MULTI_MODULE}"; then + # By default we will add the -single_module flag. You can override + # by either setting the environment variable LT_MULTI_MODULE + # non-empty at configure time, or by adding -multi_module to the + # link flags. + rm -rf libconftest.dylib* + echo "int foo(void){return 1;}" > conftest.c + echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ +-dynamiclib -Wl,-single_module conftest.c" >&AS_MESSAGE_LOG_FD + $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ + -dynamiclib -Wl,-single_module conftest.c 2>conftest.err + _lt_result=$? + if test -f libconftest.dylib && test ! -s conftest.err && test $_lt_result = 0; then + lt_cv_apple_cc_single_mod=yes + else + cat conftest.err >&AS_MESSAGE_LOG_FD + fi + rm -rf libconftest.dylib* + rm -f conftest.* + fi]) + AC_CACHE_CHECK([for -exported_symbols_list linker flag], + [lt_cv_ld_exported_symbols_list], + [lt_cv_ld_exported_symbols_list=no + save_LDFLAGS=$LDFLAGS + echo "_main" > conftest.sym + LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym" + AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])], + [lt_cv_ld_exported_symbols_list=yes], + [lt_cv_ld_exported_symbols_list=no]) + LDFLAGS="$save_LDFLAGS" + ]) + AC_CACHE_CHECK([for -force_load linker flag],[lt_cv_ld_force_load], + [lt_cv_ld_force_load=no + cat > conftest.c << _LT_EOF +int forced_loaded() { return 2;} +_LT_EOF + echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&AS_MESSAGE_LOG_FD + $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&AS_MESSAGE_LOG_FD + echo "$AR cru libconftest.a conftest.o" >&AS_MESSAGE_LOG_FD + $AR cru libconftest.a conftest.o 2>&AS_MESSAGE_LOG_FD + echo "$RANLIB libconftest.a" >&AS_MESSAGE_LOG_FD + $RANLIB libconftest.a 2>&AS_MESSAGE_LOG_FD + cat > conftest.c << _LT_EOF +int main() { return 0;} +_LT_EOF + echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&AS_MESSAGE_LOG_FD + $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err + _lt_result=$? + if test -f conftest && test ! -s conftest.err && test $_lt_result = 0 && $GREP forced_load conftest 2>&1 >/dev/null; then + lt_cv_ld_force_load=yes + else + cat conftest.err >&AS_MESSAGE_LOG_FD + fi + rm -f conftest.err libconftest.a conftest conftest.c + rm -rf conftest.dSYM + ]) + case $host_os in + rhapsody* | darwin1.[[012]]) + _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;; + darwin1.*) + _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; + darwin*) # darwin 5.x on + # if running on 10.5 or later, the deployment target defaults + # to the OS version, if on x86, and 10.4, the deployment + # target defaults to 10.4. Don't you love it? + case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in + 10.0,*86*-darwin8*|10.0,*-darwin[[91]]*) + _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; + 10.[[012]]*) + _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; + 10.*) + _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; + esac + ;; + esac + if test "$lt_cv_apple_cc_single_mod" = "yes"; then + _lt_dar_single_mod='$single_module' + fi + if test "$lt_cv_ld_exported_symbols_list" = "yes"; then + _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym' + else + _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}' + fi + if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then + _lt_dsymutil='~$DSYMUTIL $lib || :' + else + _lt_dsymutil= + fi + ;; + esac +]) + + +# _LT_DARWIN_LINKER_FEATURES +# -------------------------- +# Checks for linker and compiler features on darwin +m4_defun([_LT_DARWIN_LINKER_FEATURES], +[ + m4_require([_LT_REQUIRED_DARWIN_CHECKS]) + _LT_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_TAGVAR(hardcode_direct, $1)=no + _LT_TAGVAR(hardcode_automatic, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported + if test "$lt_cv_ld_force_load" = "yes"; then + _LT_TAGVAR(whole_archive_flag_spec, $1)='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`' + else + _LT_TAGVAR(whole_archive_flag_spec, $1)='' + fi + _LT_TAGVAR(link_all_deplibs, $1)=yes + _LT_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined" + case $cc_basename in + ifort*) _lt_dar_can_shared=yes ;; + *) _lt_dar_can_shared=$GCC ;; + esac + if test "$_lt_dar_can_shared" = "yes"; then + output_verbose_link_cmd=func_echo_all + _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" + _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" + _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" + _LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" + m4_if([$1], [CXX], +[ if test "$lt_cv_apple_cc_single_mod" != "yes"; then + _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}" + _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}" + fi +],[]) + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi +]) + +# _LT_SYS_MODULE_PATH_AIX([TAGNAME]) +# ---------------------------------- +# Links a minimal program and checks the executable +# for the system default hardcoded library path. In most cases, +# this is /usr/lib:/lib, but when the MPI compilers are used +# the location of the communication and MPI libs are included too. +# If we don't find anything, use the default library path according +# to the aix ld manual. +# Store the results from the different compilers for each TAGNAME. +# Allow to override them for all tags through lt_cv_aix_libpath. +m4_defun([_LT_SYS_MODULE_PATH_AIX], +[m4_require([_LT_DECL_SED])dnl +if test "${lt_cv_aix_libpath+set}" = set; then + aix_libpath=$lt_cv_aix_libpath +else + AC_CACHE_VAL([_LT_TAGVAR([lt_cv_aix_libpath_], [$1])], + [AC_LINK_IFELSE([AC_LANG_PROGRAM],[ + lt_aix_libpath_sed='[ + /Import File Strings/,/^$/ { + /^0/ { + s/^0 *\([^ ]*\) *$/\1/ + p + } + }]' + _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + # Check for a 64-bit object if we didn't find anything. + if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then + _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + fi],[]) + if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then + _LT_TAGVAR([lt_cv_aix_libpath_], [$1])="/usr/lib:/lib" + fi + ]) + aix_libpath=$_LT_TAGVAR([lt_cv_aix_libpath_], [$1]) +fi +])# _LT_SYS_MODULE_PATH_AIX + + +# _LT_SHELL_INIT(ARG) +# ------------------- +m4_define([_LT_SHELL_INIT], +[m4_divert_text([M4SH-INIT], [$1 +])])# _LT_SHELL_INIT + + + +# _LT_PROG_ECHO_BACKSLASH +# ----------------------- +# Find how we can fake an echo command that does not interpret backslash. +# In particular, with Autoconf 2.60 or later we add some code to the start +# of the generated configure script which will find a shell with a builtin +# printf (which we can use as an echo command). +m4_defun([_LT_PROG_ECHO_BACKSLASH], +[ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' +ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO +ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO + +AC_MSG_CHECKING([how to print strings]) +# Test print first, because it will be a builtin if present. +if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \ + test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then + ECHO='print -r --' +elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then + ECHO='printf %s\n' +else + # Use this function as a fallback that always works. + func_fallback_echo () + { + eval 'cat <<_LTECHO_EOF +$[]1 +_LTECHO_EOF' + } + ECHO='func_fallback_echo' +fi + +# func_echo_all arg... +# Invoke $ECHO with all args, space-separated. +func_echo_all () +{ + $ECHO "$*" +} + +case "$ECHO" in + printf*) AC_MSG_RESULT([printf]) ;; + print*) AC_MSG_RESULT([print -r]) ;; + *) AC_MSG_RESULT([cat]) ;; +esac + +m4_ifdef([_AS_DETECT_SUGGESTED], +[_AS_DETECT_SUGGESTED([ + test -n "${ZSH_VERSION+set}${BASH_VERSION+set}" || ( + ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' + ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO + ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO + PATH=/empty FPATH=/empty; export PATH FPATH + test "X`printf %s $ECHO`" = "X$ECHO" \ + || test "X`print -r -- $ECHO`" = "X$ECHO" )])]) + +_LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts]) +_LT_DECL([], [ECHO], [1], [An echo program that protects backslashes]) +])# _LT_PROG_ECHO_BACKSLASH + + +# _LT_WITH_SYSROOT +# ---------------- +AC_DEFUN([_LT_WITH_SYSROOT], +[AC_MSG_CHECKING([for sysroot]) +AC_ARG_WITH([sysroot], +[ --with-sysroot[=DIR] Search for dependent libraries within DIR + (or the compiler's sysroot if not specified).], +[], [with_sysroot=no]) + +dnl lt_sysroot will always be passed unquoted. We quote it here +dnl in case the user passed a directory name. +lt_sysroot= +case ${with_sysroot} in #( + yes) + if test "$GCC" = yes; then + lt_sysroot=`$CC --print-sysroot 2>/dev/null` + fi + ;; #( + /*) + lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"` + ;; #( + no|'') + ;; #( + *) + AC_MSG_RESULT([${with_sysroot}]) + AC_MSG_ERROR([The sysroot must be an absolute path.]) + ;; +esac + + AC_MSG_RESULT([${lt_sysroot:-no}]) +_LT_DECL([], [lt_sysroot], [0], [The root where to search for ]dnl +[dependent libraries, and in which our libraries should be installed.])]) + +# _LT_ENABLE_LOCK +# --------------- +m4_defun([_LT_ENABLE_LOCK], +[AC_ARG_ENABLE([libtool-lock], + [AS_HELP_STRING([--disable-libtool-lock], + [avoid locking (might break parallel builds)])]) +test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes + +# Some flags need to be propagated to the compiler or linker for good +# libtool support. +case $host in +ia64-*-hpux*) + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext + if AC_TRY_EVAL(ac_compile); then + case `/usr/bin/file conftest.$ac_objext` in + *ELF-32*) + HPUX_IA64_MODE="32" + ;; + *ELF-64*) + HPUX_IA64_MODE="64" + ;; + esac + fi + rm -rf conftest* + ;; +*-*-irix6*) + # Find out which ABI we are using. + echo '[#]line '$LINENO' "configure"' > conftest.$ac_ext + if AC_TRY_EVAL(ac_compile); then + if test "$lt_cv_prog_gnu_ld" = yes; then + case `/usr/bin/file conftest.$ac_objext` in + *32-bit*) + LD="${LD-ld} -melf32bsmip" + ;; + *N32*) + LD="${LD-ld} -melf32bmipn32" + ;; + *64-bit*) + LD="${LD-ld} -melf64bmip" + ;; + esac + else + case `/usr/bin/file conftest.$ac_objext` in + *32-bit*) + LD="${LD-ld} -32" + ;; + *N32*) + LD="${LD-ld} -n32" + ;; + *64-bit*) + LD="${LD-ld} -64" + ;; + esac + fi + fi + rm -rf conftest* + ;; + +x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \ +s390*-*linux*|s390*-*tpf*|sparc*-*linux*) + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext + if AC_TRY_EVAL(ac_compile); then + case `/usr/bin/file conftest.o` in + *32-bit*) + case $host in + x86_64-*kfreebsd*-gnu) + LD="${LD-ld} -m elf_i386_fbsd" + ;; + x86_64-*linux*) + LD="${LD-ld} -m elf_i386" + ;; + ppc64-*linux*|powerpc64-*linux*) + LD="${LD-ld} -m elf32ppclinux" + ;; + s390x-*linux*) + LD="${LD-ld} -m elf_s390" + ;; + sparc64-*linux*) + LD="${LD-ld} -m elf32_sparc" + ;; + esac + ;; + *64-bit*) + case $host in + x86_64-*kfreebsd*-gnu) + LD="${LD-ld} -m elf_x86_64_fbsd" + ;; + x86_64-*linux*) + LD="${LD-ld} -m elf_x86_64" + ;; + ppc*-*linux*|powerpc*-*linux*) + LD="${LD-ld} -m elf64ppc" + ;; + s390*-*linux*|s390*-*tpf*) + LD="${LD-ld} -m elf64_s390" + ;; + sparc*-*linux*) + LD="${LD-ld} -m elf64_sparc" + ;; + esac + ;; + esac + fi + rm -rf conftest* + ;; + +*-*-sco3.2v5*) + # On SCO OpenServer 5, we need -belf to get full-featured binaries. + SAVE_CFLAGS="$CFLAGS" + CFLAGS="$CFLAGS -belf" + AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf, + [AC_LANG_PUSH(C) + AC_LINK_IFELSE([AC_LANG_PROGRAM([[]],[[]])],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no]) + AC_LANG_POP]) + if test x"$lt_cv_cc_needs_belf" != x"yes"; then + # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf + CFLAGS="$SAVE_CFLAGS" + fi + ;; +sparc*-*solaris*) + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext + if AC_TRY_EVAL(ac_compile); then + case `/usr/bin/file conftest.o` in + *64-bit*) + case $lt_cv_prog_gnu_ld in + yes*) LD="${LD-ld} -m elf64_sparc" ;; + *) + if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then + LD="${LD-ld} -64" + fi + ;; + esac + ;; + esac + fi + rm -rf conftest* + ;; +esac + +need_locks="$enable_libtool_lock" +])# _LT_ENABLE_LOCK + + +# _LT_PROG_AR +# ----------- +m4_defun([_LT_PROG_AR], +[AC_CHECK_TOOLS(AR, [ar], false) +: ${AR=ar} +: ${AR_FLAGS=cru} +_LT_DECL([], [AR], [1], [The archiver]) +_LT_DECL([], [AR_FLAGS], [1], [Flags to create an archive]) + +AC_CACHE_CHECK([for archiver @FILE support], [lt_cv_ar_at_file], + [lt_cv_ar_at_file=no + AC_COMPILE_IFELSE([AC_LANG_PROGRAM], + [echo conftest.$ac_objext > conftest.lst + lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&AS_MESSAGE_LOG_FD' + AC_TRY_EVAL([lt_ar_try]) + if test "$ac_status" -eq 0; then + # Ensure the archiver fails upon bogus file names. + rm -f conftest.$ac_objext libconftest.a + AC_TRY_EVAL([lt_ar_try]) + if test "$ac_status" -ne 0; then + lt_cv_ar_at_file=@ + fi + fi + rm -f conftest.* libconftest.a + ]) + ]) + +if test "x$lt_cv_ar_at_file" = xno; then + archiver_list_spec= +else + archiver_list_spec=$lt_cv_ar_at_file +fi +_LT_DECL([], [archiver_list_spec], [1], + [How to feed a file listing to the archiver]) +])# _LT_PROG_AR + + +# _LT_CMD_OLD_ARCHIVE +# ------------------- +m4_defun([_LT_CMD_OLD_ARCHIVE], +[_LT_PROG_AR + +AC_CHECK_TOOL(STRIP, strip, :) +test -z "$STRIP" && STRIP=: +_LT_DECL([], [STRIP], [1], [A symbol stripping program]) + +AC_CHECK_TOOL(RANLIB, ranlib, :) +test -z "$RANLIB" && RANLIB=: +_LT_DECL([], [RANLIB], [1], + [Commands used to install an old-style archive]) + +# Determine commands to create old-style static archives. +old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs' +old_postinstall_cmds='chmod 644 $oldlib' +old_postuninstall_cmds= + +if test -n "$RANLIB"; then + case $host_os in + openbsd*) + old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib" + ;; + *) + old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib" + ;; + esac + old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" +fi + +case $host_os in + darwin*) + lock_old_archive_extraction=yes ;; + *) + lock_old_archive_extraction=no ;; +esac +_LT_DECL([], [old_postinstall_cmds], [2]) +_LT_DECL([], [old_postuninstall_cmds], [2]) +_LT_TAGDECL([], [old_archive_cmds], [2], + [Commands used to build an old-style archive]) +_LT_DECL([], [lock_old_archive_extraction], [0], + [Whether to use a lock for old archive extraction]) +])# _LT_CMD_OLD_ARCHIVE + + +# _LT_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, +# [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE]) +# ---------------------------------------------------------------- +# Check whether the given compiler option works +AC_DEFUN([_LT_COMPILER_OPTION], +[m4_require([_LT_FILEUTILS_DEFAULTS])dnl +m4_require([_LT_DECL_SED])dnl +AC_CACHE_CHECK([$1], [$2], + [$2=no + m4_if([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4]) + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + lt_compiler_flag="$3" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + # The option is referenced via a variable to avoid confusing sed. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&AS_MESSAGE_LOG_FD + echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings other than the usual output. + $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then + $2=yes + fi + fi + $RM conftest* +]) + +if test x"[$]$2" = xyes; then + m4_if([$5], , :, [$5]) +else + m4_if([$6], , :, [$6]) +fi +])# _LT_COMPILER_OPTION + +# Old name: +AU_ALIAS([AC_LIBTOOL_COMPILER_OPTION], [_LT_COMPILER_OPTION]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], []) + + +# _LT_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, +# [ACTION-SUCCESS], [ACTION-FAILURE]) +# ---------------------------------------------------- +# Check whether the given linker option works +AC_DEFUN([_LT_LINKER_OPTION], +[m4_require([_LT_FILEUTILS_DEFAULTS])dnl +m4_require([_LT_DECL_SED])dnl +AC_CACHE_CHECK([$1], [$2], + [$2=no + save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS $3" + echo "$lt_simple_link_test_code" > conftest.$ac_ext + if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then + # The linker can only warn and ignore the option if not recognized + # So say no if there are warnings + if test -s conftest.err; then + # Append any errors to the config.log. + cat conftest.err 1>&AS_MESSAGE_LOG_FD + $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if diff conftest.exp conftest.er2 >/dev/null; then + $2=yes + fi + else + $2=yes + fi + fi + $RM -r conftest* + LDFLAGS="$save_LDFLAGS" +]) + +if test x"[$]$2" = xyes; then + m4_if([$4], , :, [$4]) +else + m4_if([$5], , :, [$5]) +fi +])# _LT_LINKER_OPTION + +# Old name: +AU_ALIAS([AC_LIBTOOL_LINKER_OPTION], [_LT_LINKER_OPTION]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], []) + + +# LT_CMD_MAX_LEN +#--------------- +AC_DEFUN([LT_CMD_MAX_LEN], +[AC_REQUIRE([AC_CANONICAL_HOST])dnl +# find the maximum length of command line arguments +AC_MSG_CHECKING([the maximum length of command line arguments]) +AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl + i=0 + teststring="ABCD" + + case $build_os in + msdosdjgpp*) + # On DJGPP, this test can blow up pretty badly due to problems in libc + # (any single argument exceeding 2000 bytes causes a buffer overrun + # during glob expansion). Even if it were fixed, the result of this + # check would be larger than it should be. + lt_cv_sys_max_cmd_len=12288; # 12K is about right + ;; + + gnu*) + # Under GNU Hurd, this test is not required because there is + # no limit to the length of command line arguments. + # Libtool will interpret -1 as no limit whatsoever + lt_cv_sys_max_cmd_len=-1; + ;; + + cygwin* | mingw* | cegcc*) + # On Win9x/ME, this test blows up -- it succeeds, but takes + # about 5 minutes as the teststring grows exponentially. + # Worse, since 9x/ME are not pre-emptively multitasking, + # you end up with a "frozen" computer, even though with patience + # the test eventually succeeds (with a max line length of 256k). + # Instead, let's just punt: use the minimum linelength reported by + # all of the supported platforms: 8192 (on NT/2K/XP). + lt_cv_sys_max_cmd_len=8192; + ;; + + mint*) + # On MiNT this can take a long time and run out of memory. + lt_cv_sys_max_cmd_len=8192; + ;; + + amigaos*) + # On AmigaOS with pdksh, this test takes hours, literally. + # So we just punt and use a minimum line length of 8192. + lt_cv_sys_max_cmd_len=8192; + ;; + + netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) + # This has been around since 386BSD, at least. Likely further. + if test -x /sbin/sysctl; then + lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` + elif test -x /usr/sbin/sysctl; then + lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` + else + lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs + fi + # And add a safety zone + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` + ;; + + interix*) + # We know the value 262144 and hardcode it with a safety zone (like BSD) + lt_cv_sys_max_cmd_len=196608 + ;; + + osf*) + # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure + # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not + # nice to cause kernel panics so lets avoid the loop below. + # First set a reasonable default. + lt_cv_sys_max_cmd_len=16384 + # + if test -x /sbin/sysconfig; then + case `/sbin/sysconfig -q proc exec_disable_arg_limit` in + *1*) lt_cv_sys_max_cmd_len=-1 ;; + esac + fi + ;; + sco3.2v5*) + lt_cv_sys_max_cmd_len=102400 + ;; + sysv5* | sco5v6* | sysv4.2uw2*) + kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` + if test -n "$kargmax"; then + lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ ]]//'` + else + lt_cv_sys_max_cmd_len=32768 + fi + ;; + *) + lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` + if test -n "$lt_cv_sys_max_cmd_len"; then + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` + else + # Make teststring a little bigger before we do anything with it. + # a 1K string should be a reasonable start. + for i in 1 2 3 4 5 6 7 8 ; do + teststring=$teststring$teststring + done + SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} + # If test is not a shell built-in, we'll probably end up computing a + # maximum length that is only half of the actual maximum length, but + # we can't tell. + while { test "X"`func_fallback_echo "$teststring$teststring" 2>/dev/null` \ + = "X$teststring$teststring"; } >/dev/null 2>&1 && + test $i != 17 # 1/2 MB should be enough + do + i=`expr $i + 1` + teststring=$teststring$teststring + done + # Only check the string length outside the loop. + lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1` + teststring= + # Add a significant safety factor because C++ compilers can tack on + # massive amounts of additional arguments before passing them to the + # linker. It appears as though 1/2 is a usable value. + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` + fi + ;; + esac +]) +if test -n $lt_cv_sys_max_cmd_len ; then + AC_MSG_RESULT($lt_cv_sys_max_cmd_len) +else + AC_MSG_RESULT(none) +fi +max_cmd_len=$lt_cv_sys_max_cmd_len +_LT_DECL([], [max_cmd_len], [0], + [What is the maximum length of a command?]) +])# LT_CMD_MAX_LEN + +# Old name: +AU_ALIAS([AC_LIBTOOL_SYS_MAX_CMD_LEN], [LT_CMD_MAX_LEN]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], []) + + +# _LT_HEADER_DLFCN +# ---------------- +m4_defun([_LT_HEADER_DLFCN], +[AC_CHECK_HEADERS([dlfcn.h], [], [], [AC_INCLUDES_DEFAULT])dnl +])# _LT_HEADER_DLFCN + + +# _LT_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE, +# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING) +# ---------------------------------------------------------------- +m4_defun([_LT_TRY_DLOPEN_SELF], +[m4_require([_LT_HEADER_DLFCN])dnl +if test "$cross_compiling" = yes; then : + [$4] +else + lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 + lt_status=$lt_dlunknown + cat > conftest.$ac_ext <<_LT_EOF +[#line $LINENO "configure" +#include "confdefs.h" + +#if HAVE_DLFCN_H +#include +#endif + +#include + +#ifdef RTLD_GLOBAL +# define LT_DLGLOBAL RTLD_GLOBAL +#else +# ifdef DL_GLOBAL +# define LT_DLGLOBAL DL_GLOBAL +# else +# define LT_DLGLOBAL 0 +# endif +#endif + +/* We may have to define LT_DLLAZY_OR_NOW in the command line if we + find out it does not work in some platform. */ +#ifndef LT_DLLAZY_OR_NOW +# ifdef RTLD_LAZY +# define LT_DLLAZY_OR_NOW RTLD_LAZY +# else +# ifdef DL_LAZY +# define LT_DLLAZY_OR_NOW DL_LAZY +# else +# ifdef RTLD_NOW +# define LT_DLLAZY_OR_NOW RTLD_NOW +# else +# ifdef DL_NOW +# define LT_DLLAZY_OR_NOW DL_NOW +# else +# define LT_DLLAZY_OR_NOW 0 +# endif +# endif +# endif +# endif +#endif + +/* When -fvisbility=hidden is used, assume the code has been annotated + correspondingly for the symbols needed. */ +#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) +int fnord () __attribute__((visibility("default"))); +#endif + +int fnord () { return 42; } +int main () +{ + void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); + int status = $lt_dlunknown; + + if (self) + { + if (dlsym (self,"fnord")) status = $lt_dlno_uscore; + else + { + if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; + else puts (dlerror ()); + } + /* dlclose (self); */ + } + else + puts (dlerror ()); + + return status; +}] +_LT_EOF + if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then + (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null + lt_status=$? + case x$lt_status in + x$lt_dlno_uscore) $1 ;; + x$lt_dlneed_uscore) $2 ;; + x$lt_dlunknown|x*) $3 ;; + esac + else : + # compilation failed + $3 + fi +fi +rm -fr conftest* +])# _LT_TRY_DLOPEN_SELF + + +# LT_SYS_DLOPEN_SELF +# ------------------ +AC_DEFUN([LT_SYS_DLOPEN_SELF], +[m4_require([_LT_HEADER_DLFCN])dnl +if test "x$enable_dlopen" != xyes; then + enable_dlopen=unknown + enable_dlopen_self=unknown + enable_dlopen_self_static=unknown +else + lt_cv_dlopen=no + lt_cv_dlopen_libs= + + case $host_os in + beos*) + lt_cv_dlopen="load_add_on" + lt_cv_dlopen_libs= + lt_cv_dlopen_self=yes + ;; + + mingw* | pw32* | cegcc*) + lt_cv_dlopen="LoadLibrary" + lt_cv_dlopen_libs= + ;; + + cygwin*) + lt_cv_dlopen="dlopen" + lt_cv_dlopen_libs= + ;; + + darwin*) + # if libdl is installed we need to link against it + AC_CHECK_LIB([dl], [dlopen], + [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[ + lt_cv_dlopen="dyld" + lt_cv_dlopen_libs= + lt_cv_dlopen_self=yes + ]) + ;; + + *) + AC_CHECK_FUNC([shl_load], + [lt_cv_dlopen="shl_load"], + [AC_CHECK_LIB([dld], [shl_load], + [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"], + [AC_CHECK_FUNC([dlopen], + [lt_cv_dlopen="dlopen"], + [AC_CHECK_LIB([dl], [dlopen], + [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"], + [AC_CHECK_LIB([svld], [dlopen], + [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"], + [AC_CHECK_LIB([dld], [dld_link], + [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"]) + ]) + ]) + ]) + ]) + ]) + ;; + esac + + if test "x$lt_cv_dlopen" != xno; then + enable_dlopen=yes + else + enable_dlopen=no + fi + + case $lt_cv_dlopen in + dlopen) + save_CPPFLAGS="$CPPFLAGS" + test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" + + save_LDFLAGS="$LDFLAGS" + wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" + + save_LIBS="$LIBS" + LIBS="$lt_cv_dlopen_libs $LIBS" + + AC_CACHE_CHECK([whether a program can dlopen itself], + lt_cv_dlopen_self, [dnl + _LT_TRY_DLOPEN_SELF( + lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes, + lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross) + ]) + + if test "x$lt_cv_dlopen_self" = xyes; then + wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" + AC_CACHE_CHECK([whether a statically linked program can dlopen itself], + lt_cv_dlopen_self_static, [dnl + _LT_TRY_DLOPEN_SELF( + lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes, + lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross) + ]) + fi + + CPPFLAGS="$save_CPPFLAGS" + LDFLAGS="$save_LDFLAGS" + LIBS="$save_LIBS" + ;; + esac + + case $lt_cv_dlopen_self in + yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; + *) enable_dlopen_self=unknown ;; + esac + + case $lt_cv_dlopen_self_static in + yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; + *) enable_dlopen_self_static=unknown ;; + esac +fi +_LT_DECL([dlopen_support], [enable_dlopen], [0], + [Whether dlopen is supported]) +_LT_DECL([dlopen_self], [enable_dlopen_self], [0], + [Whether dlopen of programs is supported]) +_LT_DECL([dlopen_self_static], [enable_dlopen_self_static], [0], + [Whether dlopen of statically linked programs is supported]) +])# LT_SYS_DLOPEN_SELF + +# Old name: +AU_ALIAS([AC_LIBTOOL_DLOPEN_SELF], [LT_SYS_DLOPEN_SELF]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], []) + + +# _LT_COMPILER_C_O([TAGNAME]) +# --------------------------- +# Check to see if options -c and -o are simultaneously supported by compiler. +# This macro does not hard code the compiler like AC_PROG_CC_C_O. +m4_defun([_LT_COMPILER_C_O], +[m4_require([_LT_DECL_SED])dnl +m4_require([_LT_FILEUTILS_DEFAULTS])dnl +m4_require([_LT_TAG_COMPILER])dnl +AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext], + [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)], + [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no + $RM -r conftest 2>/dev/null + mkdir conftest + cd conftest + mkdir out + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + + lt_compiler_flag="-o out/conftest2.$ac_objext" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD) + (eval "$lt_compile" 2>out/conftest.err) + ac_status=$? + cat out/conftest.err >&AS_MESSAGE_LOG_FD + echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD + if (exit $ac_status) && test -s out/conftest2.$ac_objext + then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp + $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 + if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then + _LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes + fi + fi + chmod u+w . 2>&AS_MESSAGE_LOG_FD + $RM conftest* + # SGI C++ compiler will create directory out/ii_files/ for + # template instantiation + test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files + $RM out/* && rmdir out + cd .. + $RM -r conftest + $RM conftest* +]) +_LT_TAGDECL([compiler_c_o], [lt_cv_prog_compiler_c_o], [1], + [Does compiler simultaneously support -c and -o options?]) +])# _LT_COMPILER_C_O + + +# _LT_COMPILER_FILE_LOCKS([TAGNAME]) +# ---------------------------------- +# Check to see if we can do hard links to lock some files if needed +m4_defun([_LT_COMPILER_FILE_LOCKS], +[m4_require([_LT_ENABLE_LOCK])dnl +m4_require([_LT_FILEUTILS_DEFAULTS])dnl +_LT_COMPILER_C_O([$1]) + +hard_links="nottested" +if test "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then + # do not overwrite the value of need_locks provided by the user + AC_MSG_CHECKING([if we can lock with hard links]) + hard_links=yes + $RM conftest* + ln conftest.a conftest.b 2>/dev/null && hard_links=no + touch conftest.a + ln conftest.a conftest.b 2>&5 || hard_links=no + ln conftest.a conftest.b 2>/dev/null && hard_links=no + AC_MSG_RESULT([$hard_links]) + if test "$hard_links" = no; then + AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe]) + need_locks=warn + fi +else + need_locks=no +fi +_LT_DECL([], [need_locks], [1], [Must we lock files when doing compilation?]) +])# _LT_COMPILER_FILE_LOCKS + + +# _LT_CHECK_OBJDIR +# ---------------- +m4_defun([_LT_CHECK_OBJDIR], +[AC_CACHE_CHECK([for objdir], [lt_cv_objdir], +[rm -f .libs 2>/dev/null +mkdir .libs 2>/dev/null +if test -d .libs; then + lt_cv_objdir=.libs +else + # MS-DOS does not allow filenames that begin with a dot. + lt_cv_objdir=_libs +fi +rmdir .libs 2>/dev/null]) +objdir=$lt_cv_objdir +_LT_DECL([], [objdir], [0], + [The name of the directory that contains temporary libtool files])dnl +m4_pattern_allow([LT_OBJDIR])dnl +AC_DEFINE_UNQUOTED(LT_OBJDIR, "$lt_cv_objdir/", + [Define to the sub-directory in which libtool stores uninstalled libraries.]) +])# _LT_CHECK_OBJDIR + + +# _LT_LINKER_HARDCODE_LIBPATH([TAGNAME]) +# -------------------------------------- +# Check hardcoding attributes. +m4_defun([_LT_LINKER_HARDCODE_LIBPATH], +[AC_MSG_CHECKING([how to hardcode library paths into programs]) +_LT_TAGVAR(hardcode_action, $1)= +if test -n "$_LT_TAGVAR(hardcode_libdir_flag_spec, $1)" || + test -n "$_LT_TAGVAR(runpath_var, $1)" || + test "X$_LT_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then + + # We can hardcode non-existent directories. + if test "$_LT_TAGVAR(hardcode_direct, $1)" != no && + # If the only mechanism to avoid hardcoding is shlibpath_var, we + # have to relink, otherwise we might link with an installed library + # when we should be linking with a yet-to-be-installed one + ## test "$_LT_TAGVAR(hardcode_shlibpath_var, $1)" != no && + test "$_LT_TAGVAR(hardcode_minus_L, $1)" != no; then + # Linking always hardcodes the temporary library directory. + _LT_TAGVAR(hardcode_action, $1)=relink + else + # We can link without hardcoding, and we can hardcode nonexisting dirs. + _LT_TAGVAR(hardcode_action, $1)=immediate + fi +else + # We cannot hardcode anything, or else we can only hardcode existing + # directories. + _LT_TAGVAR(hardcode_action, $1)=unsupported +fi +AC_MSG_RESULT([$_LT_TAGVAR(hardcode_action, $1)]) + +if test "$_LT_TAGVAR(hardcode_action, $1)" = relink || + test "$_LT_TAGVAR(inherit_rpath, $1)" = yes; then + # Fast installation is not supported + enable_fast_install=no +elif test "$shlibpath_overrides_runpath" = yes || + test "$enable_shared" = no; then + # Fast installation is not necessary + enable_fast_install=needless +fi +_LT_TAGDECL([], [hardcode_action], [0], + [How to hardcode a shared library path into an executable]) +])# _LT_LINKER_HARDCODE_LIBPATH + + +# _LT_CMD_STRIPLIB +# ---------------- +m4_defun([_LT_CMD_STRIPLIB], +[m4_require([_LT_DECL_EGREP]) +striplib= +old_striplib= +AC_MSG_CHECKING([whether stripping libraries is possible]) +if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then + test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" + test -z "$striplib" && striplib="$STRIP --strip-unneeded" + AC_MSG_RESULT([yes]) +else +# FIXME - insert some real tests, host_os isn't really good enough + case $host_os in + darwin*) + if test -n "$STRIP" ; then + striplib="$STRIP -x" + old_striplib="$STRIP -S" + AC_MSG_RESULT([yes]) + else + AC_MSG_RESULT([no]) + fi + ;; + *) + AC_MSG_RESULT([no]) + ;; + esac +fi +_LT_DECL([], [old_striplib], [1], [Commands to strip libraries]) +_LT_DECL([], [striplib], [1]) +])# _LT_CMD_STRIPLIB + + +# _LT_SYS_DYNAMIC_LINKER([TAG]) +# ----------------------------- +# PORTME Fill in your ld.so characteristics +m4_defun([_LT_SYS_DYNAMIC_LINKER], +[AC_REQUIRE([AC_CANONICAL_HOST])dnl +m4_require([_LT_DECL_EGREP])dnl +m4_require([_LT_FILEUTILS_DEFAULTS])dnl +m4_require([_LT_DECL_OBJDUMP])dnl +m4_require([_LT_DECL_SED])dnl +m4_require([_LT_CHECK_SHELL_FEATURES])dnl +AC_MSG_CHECKING([dynamic linker characteristics]) +m4_if([$1], + [], [ +if test "$GCC" = yes; then + case $host_os in + darwin*) lt_awk_arg="/^libraries:/,/LR/" ;; + *) lt_awk_arg="/^libraries:/" ;; + esac + case $host_os in + mingw* | cegcc*) lt_sed_strip_eq="s,=\([[A-Za-z]]:\),\1,g" ;; + *) lt_sed_strip_eq="s,=/,/,g" ;; + esac + lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq` + case $lt_search_path_spec in + *\;*) + # if the path contains ";" then we assume it to be the separator + # otherwise default to the standard path separator (i.e. ":") - it is + # assumed that no part of a normal pathname contains ";" but that should + # okay in the real world where ";" in dirpaths is itself problematic. + lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'` + ;; + *) + lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"` + ;; + esac + # Ok, now we have the path, separated by spaces, we can step through it + # and add multilib dir if necessary. + lt_tmp_lt_search_path_spec= + lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` + for lt_sys_path in $lt_search_path_spec; do + if test -d "$lt_sys_path/$lt_multi_os_dir"; then + lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir" + else + test -d "$lt_sys_path" && \ + lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" + fi + done + lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk ' +BEGIN {RS=" "; FS="/|\n";} { + lt_foo=""; + lt_count=0; + for (lt_i = NF; lt_i > 0; lt_i--) { + if ($lt_i != "" && $lt_i != ".") { + if ($lt_i == "..") { + lt_count++; + } else { + if (lt_count == 0) { + lt_foo="/" $lt_i lt_foo; + } else { + lt_count--; + } + } + } + } + if (lt_foo != "") { lt_freq[[lt_foo]]++; } + if (lt_freq[[lt_foo]] == 1) { print lt_foo; } +}'` + # AWK program above erroneously prepends '/' to C:/dos/paths + # for these hosts. + case $host_os in + mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\ + $SED 's,/\([[A-Za-z]]:\),\1,g'` ;; + esac + sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP` +else + sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" +fi]) +library_names_spec= +libname_spec='lib$name' +soname_spec= +shrext_cmds=".so" +postinstall_cmds= +postuninstall_cmds= +finish_cmds= +finish_eval= +shlibpath_var= +shlibpath_overrides_runpath=unknown +version_type=none +dynamic_linker="$host_os ld.so" +sys_lib_dlsearch_path_spec="/lib /usr/lib" +need_lib_prefix=unknown +hardcode_into_libs=no + +# when you set need_version to no, make sure it does not cause -set_version +# flags to be left without arguments +need_version=unknown + +case $host_os in +aix3*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' + shlibpath_var=LIBPATH + + # AIX 3 has no versioning support, so we append a major version to the name. + soname_spec='${libname}${release}${shared_ext}$major' + ;; + +aix[[4-9]]*) + version_type=linux + need_lib_prefix=no + need_version=no + hardcode_into_libs=yes + if test "$host_cpu" = ia64; then + # AIX 5 supports IA64 + library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + else + # With GCC up to 2.95.x, collect2 would create an import file + # for dependence libraries. The import file would start with + # the line `#! .'. This would cause the generated library to + # depend on `.', always an invalid library. This was fixed in + # development snapshots of GCC prior to 3.0. + case $host_os in + aix4 | aix4.[[01]] | aix4.[[01]].*) + if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' + echo ' yes ' + echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then + : + else + can_build_shared=no + fi + ;; + esac + # AIX (on Power*) has no versioning support, so currently we can not hardcode correct + # soname into executable. Probably we can add versioning support to + # collect2, so additional links can be useful in future. + if test "$aix_use_runtimelinking" = yes; then + # If using run time linking (on AIX 4.2 or later) use lib.so + # instead of lib.a to let people know that these are not + # typical AIX shared libraries. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + else + # We preserve .a as extension for shared libraries through AIX4.2 + # and later when we are not doing run time linking. + library_names_spec='${libname}${release}.a $libname.a' + soname_spec='${libname}${release}${shared_ext}$major' + fi + shlibpath_var=LIBPATH + fi + ;; + +amigaos*) + case $host_cpu in + powerpc) + # Since July 2007 AmigaOS4 officially supports .so libraries. + # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + ;; + m68k) + library_names_spec='$libname.ixlibrary $libname.a' + # Create ${libname}_ixlibrary.a entries in /sys/libs. + finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' + ;; + esac + ;; + +beos*) + library_names_spec='${libname}${shared_ext}' + dynamic_linker="$host_os ld.so" + shlibpath_var=LIBRARY_PATH + ;; + +bsdi[[45]]*) + version_type=linux + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" + sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" + # the default ld.so.conf also contains /usr/contrib/lib and + # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow + # libtool to hard-code these into programs + ;; + +cygwin* | mingw* | pw32* | cegcc*) + version_type=windows + shrext_cmds=".dll" + need_version=no + need_lib_prefix=no + + case $GCC,$cc_basename in + yes,*) + # gcc + library_names_spec='$libname.dll.a' + # DLL is installed to $(libdir)/../bin by postinstall_cmds + postinstall_cmds='base_file=`basename \${file}`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog $dir/$dlname \$dldir/$dlname~ + chmod a+x \$dldir/$dlname~ + if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then + eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; + fi' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $RM \$dlpath' + shlibpath_overrides_runpath=yes + + case $host_os in + cygwin*) + # Cygwin DLLs use 'cyg' prefix rather than 'lib' + soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' +m4_if([$1], [],[ + sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"]) + ;; + mingw* | cegcc*) + # MinGW DLLs use traditional 'lib' prefix + soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' + ;; + pw32*) + # pw32 DLLs use 'pw' prefix rather than 'lib' + library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' + ;; + esac + dynamic_linker='Win32 ld.exe' + ;; + + *,cl*) + # Native MSVC + libname_spec='$name' + soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' + library_names_spec='${libname}.dll.lib' + + case $build_os in + mingw*) + sys_lib_search_path_spec= + lt_save_ifs=$IFS + IFS=';' + for lt_path in $LIB + do + IFS=$lt_save_ifs + # Let DOS variable expansion print the short 8.3 style file name. + lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"` + sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path" + done + IFS=$lt_save_ifs + # Convert to MSYS style. + sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([[a-zA-Z]]\\):| /\\1|g' -e 's|^ ||'` + ;; + cygwin*) + # Convert to unix form, then to dos form, then back to unix form + # but this time dos style (no spaces!) so that the unix form looks + # like /cygdrive/c/PROGRA~1:/cygdr... + sys_lib_search_path_spec=`cygpath --path --unix "$LIB"` + sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null` + sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + ;; + *) + sys_lib_search_path_spec="$LIB" + if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then + # It is most probably a Windows format PATH. + sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` + else + sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + fi + # FIXME: find the short name or the path components, as spaces are + # common. (e.g. "Program Files" -> "PROGRA~1") + ;; + esac + + # DLL is installed to $(libdir)/../bin by postinstall_cmds + postinstall_cmds='base_file=`basename \${file}`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog $dir/$dlname \$dldir/$dlname' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $RM \$dlpath' + shlibpath_overrides_runpath=yes + dynamic_linker='Win32 link.exe' + ;; + + *) + # Assume MSVC wrapper + library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib' + dynamic_linker='Win32 ld.exe' + ;; + esac + # FIXME: first we should search . and the directory the executable is in + shlibpath_var=PATH + ;; + +darwin* | rhapsody*) + dynamic_linker="$host_os dyld" + version_type=darwin + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext' + soname_spec='${libname}${release}${major}$shared_ext' + shlibpath_overrides_runpath=yes + shlibpath_var=DYLD_LIBRARY_PATH + shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' +m4_if([$1], [],[ + sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"]) + sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' + ;; + +dgux*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +freebsd1*) + dynamic_linker=no + ;; + +freebsd* | dragonfly*) + # DragonFly does not have aout. When/if they implement a new + # versioning mechanism, adjust this. + if test -x /usr/bin/objformat; then + objformat=`/usr/bin/objformat` + else + case $host_os in + freebsd[[123]]*) objformat=aout ;; + *) objformat=elf ;; + esac + fi + version_type=freebsd-$objformat + case $version_type in + freebsd-elf*) + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' + need_version=no + need_lib_prefix=no + ;; + freebsd-*) + library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' + need_version=yes + ;; + esac + shlibpath_var=LD_LIBRARY_PATH + case $host_os in + freebsd2*) + shlibpath_overrides_runpath=yes + ;; + freebsd3.[[01]]* | freebsdelf3.[[01]]*) + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \ + freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1) + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + *) # from 4.6 on, and DragonFly + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + esac + ;; + +gnu*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + +haiku*) + version_type=linux + need_lib_prefix=no + need_version=no + dynamic_linker="$host_os runtime_loader" + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LIBRARY_PATH + shlibpath_overrides_runpath=yes + sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib' + hardcode_into_libs=yes + ;; + +hpux9* | hpux10* | hpux11*) + # Give a soname corresponding to the major version so that dld.sl refuses to + # link against other versions. + version_type=sunos + need_lib_prefix=no + need_version=no + case $host_cpu in + ia64*) + shrext_cmds='.so' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.so" + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + if test "X$HPUX_IA64_MODE" = X32; then + sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" + else + sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" + fi + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + hppa*64*) + shrext_cmds='.sl' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.sl" + shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + *) + shrext_cmds='.sl' + dynamic_linker="$host_os dld.sl" + shlibpath_var=SHLIB_PATH + shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + ;; + esac + # HP-UX runs *really* slowly unless shared libraries are mode 555, ... + postinstall_cmds='chmod 555 $lib' + # or fails outright, so override atomically: + install_override_mode=555 + ;; + +interix[[3-9]]*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + +irix5* | irix6* | nonstopux*) + case $host_os in + nonstopux*) version_type=nonstopux ;; + *) + if test "$lt_cv_prog_gnu_ld" = yes; then + version_type=linux + else + version_type=irix + fi ;; + esac + need_lib_prefix=no + need_version=no + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' + case $host_os in + irix5* | nonstopux*) + libsuff= shlibsuff= + ;; + *) + case $LD in # libtool.m4 will add one of these switches to LD + *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") + libsuff= shlibsuff= libmagic=32-bit;; + *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") + libsuff=32 shlibsuff=N32 libmagic=N32;; + *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") + libsuff=64 shlibsuff=64 libmagic=64-bit;; + *) libsuff= shlibsuff= libmagic=never-match;; + esac + ;; + esac + shlibpath_var=LD_LIBRARY${shlibsuff}_PATH + shlibpath_overrides_runpath=no + sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" + sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" + hardcode_into_libs=yes + ;; + +# No shared lib support for Linux oldld, aout, or coff. +linux*oldld* | linux*aout* | linux*coff*) + dynamic_linker=no + ;; + +# This must be Linux ELF. +linux* | k*bsd*-gnu | kopensolaris*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + + # Some binutils ld are patched to set DT_RUNPATH + AC_CACHE_VAL([lt_cv_shlibpath_overrides_runpath], + [lt_cv_shlibpath_overrides_runpath=no + save_LDFLAGS=$LDFLAGS + save_libdir=$libdir + eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \ + LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\"" + AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])], + [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null], + [lt_cv_shlibpath_overrides_runpath=yes])]) + LDFLAGS=$save_LDFLAGS + libdir=$save_libdir + ]) + shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath + + # This implies no fast_install, which is unacceptable. + # Some rework will be needed to allow for fast_install + # before this can be enabled. + hardcode_into_libs=yes + + # Append ld.so.conf contents to the search path + if test -f /etc/ld.so.conf; then + lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '` + sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" + fi + + # We used to test for /lib/ld.so.1 and disable shared libraries on + # powerpc, because MkLinux only supported shared libraries with the + # GNU dynamic linker. Since this was broken with cross compilers, + # most powerpc-linux boxes support dynamic linking these days and + # people can always --disable-shared, the test was removed, and we + # assume the GNU/Linux dynamic linker is in use. + dynamic_linker='GNU/Linux ld.so' + ;; + +netbsdelf*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + dynamic_linker='NetBSD ld.elf_so' + ;; + +netbsd*) + version_type=sunos + need_lib_prefix=no + need_version=no + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + dynamic_linker='NetBSD (a.out) ld.so' + else + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + dynamic_linker='NetBSD ld.elf_so' + fi + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + +newsos6) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + ;; + +*nto* | *qnx*) + version_type=qnx + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + dynamic_linker='ldqnx.so' + ;; + +openbsd*) + version_type=sunos + sys_lib_dlsearch_path_spec="/usr/lib" + need_lib_prefix=no + # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. + case $host_os in + openbsd3.3 | openbsd3.3.*) need_version=yes ;; + *) need_version=no ;; + esac + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + shlibpath_var=LD_LIBRARY_PATH + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + case $host_os in + openbsd2.[[89]] | openbsd2.[[89]].*) + shlibpath_overrides_runpath=no + ;; + *) + shlibpath_overrides_runpath=yes + ;; + esac + else + shlibpath_overrides_runpath=yes + fi + ;; + +os2*) + libname_spec='$name' + shrext_cmds=".dll" + need_lib_prefix=no + library_names_spec='$libname${shared_ext} $libname.a' + dynamic_linker='OS/2 ld.exe' + shlibpath_var=LIBPATH + ;; + +osf3* | osf4* | osf5*) + version_type=osf + need_lib_prefix=no + need_version=no + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" + sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" + ;; + +rdos*) + dynamic_linker=no + ;; + +solaris*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + # ldd complains unless libraries are executable + postinstall_cmds='chmod +x $lib' + ;; + +sunos4*) + version_type=sunos + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + if test "$with_gnu_ld" = yes; then + need_lib_prefix=no + fi + need_version=yes + ;; + +sysv4 | sysv4.3*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + case $host_vendor in + sni) + shlibpath_overrides_runpath=no + need_lib_prefix=no + runpath_var=LD_RUN_PATH + ;; + siemens) + need_lib_prefix=no + ;; + motorola) + need_lib_prefix=no + need_version=no + shlibpath_overrides_runpath=no + sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' + ;; + esac + ;; + +sysv4*MP*) + if test -d /usr/nec ;then + version_type=linux + library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' + soname_spec='$libname${shared_ext}.$major' + shlibpath_var=LD_LIBRARY_PATH + fi + ;; + +sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) + version_type=freebsd-elf + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + if test "$with_gnu_ld" = yes; then + sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' + else + sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' + case $host_os in + sco3.2v5*) + sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" + ;; + esac + fi + sys_lib_dlsearch_path_spec='/usr/lib' + ;; + +tpf*) + # TPF is a cross-target only. Preferred cross-host = GNU/Linux. + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + +uts4*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +*) + dynamic_linker=no + ;; +esac +AC_MSG_RESULT([$dynamic_linker]) +test "$dynamic_linker" = no && can_build_shared=no + +variables_saved_for_relink="PATH $shlibpath_var $runpath_var" +if test "$GCC" = yes; then + variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" +fi + +if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then + sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" +fi +if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then + sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" +fi + +_LT_DECL([], [variables_saved_for_relink], [1], + [Variables whose values should be saved in libtool wrapper scripts and + restored at link time]) +_LT_DECL([], [need_lib_prefix], [0], + [Do we need the "lib" prefix for modules?]) +_LT_DECL([], [need_version], [0], [Do we need a version for libraries?]) +_LT_DECL([], [version_type], [0], [Library versioning type]) +_LT_DECL([], [runpath_var], [0], [Shared library runtime path variable]) +_LT_DECL([], [shlibpath_var], [0],[Shared library path variable]) +_LT_DECL([], [shlibpath_overrides_runpath], [0], + [Is shlibpath searched before the hard-coded library search path?]) +_LT_DECL([], [libname_spec], [1], [Format of library name prefix]) +_LT_DECL([], [library_names_spec], [1], + [[List of archive names. First name is the real one, the rest are links. + The last name is the one that the linker finds with -lNAME]]) +_LT_DECL([], [soname_spec], [1], + [[The coded name of the library, if different from the real name]]) +_LT_DECL([], [install_override_mode], [1], + [Permission mode override for installation of shared libraries]) +_LT_DECL([], [postinstall_cmds], [2], + [Command to use after installation of a shared archive]) +_LT_DECL([], [postuninstall_cmds], [2], + [Command to use after uninstallation of a shared archive]) +_LT_DECL([], [finish_cmds], [2], + [Commands used to finish a libtool library installation in a directory]) +_LT_DECL([], [finish_eval], [1], + [[As "finish_cmds", except a single script fragment to be evaled but + not shown]]) +_LT_DECL([], [hardcode_into_libs], [0], + [Whether we should hardcode library paths into libraries]) +_LT_DECL([], [sys_lib_search_path_spec], [2], + [Compile-time system search path for libraries]) +_LT_DECL([], [sys_lib_dlsearch_path_spec], [2], + [Run-time system search path for libraries]) +])# _LT_SYS_DYNAMIC_LINKER + + +# _LT_PATH_TOOL_PREFIX(TOOL) +# -------------------------- +# find a file program which can recognize shared library +AC_DEFUN([_LT_PATH_TOOL_PREFIX], +[m4_require([_LT_DECL_EGREP])dnl +AC_MSG_CHECKING([for $1]) +AC_CACHE_VAL(lt_cv_path_MAGIC_CMD, +[case $MAGIC_CMD in +[[\\/*] | ?:[\\/]*]) + lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. + ;; +*) + lt_save_MAGIC_CMD="$MAGIC_CMD" + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR +dnl $ac_dummy forces splitting on constant user-supplied paths. +dnl POSIX.2 word splitting is done only on the output of word expansions, +dnl not every word. This closes a longstanding sh security hole. + ac_dummy="m4_if([$2], , $PATH, [$2])" + for ac_dir in $ac_dummy; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$1; then + lt_cv_path_MAGIC_CMD="$ac_dir/$1" + if test -n "$file_magic_test_file"; then + case $deplibs_check_method in + "file_magic "*) + file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` + MAGIC_CMD="$lt_cv_path_MAGIC_CMD" + if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | + $EGREP "$file_magic_regex" > /dev/null; then + : + else + cat <<_LT_EOF 1>&2 + +*** Warning: the command libtool uses to detect shared libraries, +*** $file_magic_cmd, produces output that libtool cannot recognize. +*** The result is that libtool may fail to recognize shared libraries +*** as such. This will affect the creation of libtool libraries that +*** depend on shared libraries, but programs linked with such libtool +*** libraries will work regardless of this problem. Nevertheless, you +*** may want to report the problem to your system manager and/or to +*** bug-libtool@gnu.org + +_LT_EOF + fi ;; + esac + fi + break + fi + done + IFS="$lt_save_ifs" + MAGIC_CMD="$lt_save_MAGIC_CMD" + ;; +esac]) +MAGIC_CMD="$lt_cv_path_MAGIC_CMD" +if test -n "$MAGIC_CMD"; then + AC_MSG_RESULT($MAGIC_CMD) +else + AC_MSG_RESULT(no) +fi +_LT_DECL([], [MAGIC_CMD], [0], + [Used to examine libraries when file_magic_cmd begins with "file"])dnl +])# _LT_PATH_TOOL_PREFIX + +# Old name: +AU_ALIAS([AC_PATH_TOOL_PREFIX], [_LT_PATH_TOOL_PREFIX]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_PATH_TOOL_PREFIX], []) + + +# _LT_PATH_MAGIC +# -------------- +# find a file program which can recognize a shared library +m4_defun([_LT_PATH_MAGIC], +[_LT_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH) +if test -z "$lt_cv_path_MAGIC_CMD"; then + if test -n "$ac_tool_prefix"; then + _LT_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH) + else + MAGIC_CMD=: + fi +fi +])# _LT_PATH_MAGIC + + +# LT_PATH_LD +# ---------- +# find the pathname to the GNU or non-GNU linker +AC_DEFUN([LT_PATH_LD], +[AC_REQUIRE([AC_PROG_CC])dnl +AC_REQUIRE([AC_CANONICAL_HOST])dnl +AC_REQUIRE([AC_CANONICAL_BUILD])dnl +m4_require([_LT_DECL_SED])dnl +m4_require([_LT_DECL_EGREP])dnl +m4_require([_LT_PROG_ECHO_BACKSLASH])dnl + +AC_ARG_WITH([gnu-ld], + [AS_HELP_STRING([--with-gnu-ld], + [assume the C compiler uses GNU ld @<:@default=no@:>@])], + [test "$withval" = no || with_gnu_ld=yes], + [with_gnu_ld=no])dnl + +ac_prog=ld +if test "$GCC" = yes; then + # Check if gcc -print-prog-name=ld gives a path. + AC_MSG_CHECKING([for ld used by $CC]) + case $host in + *-*-mingw*) + # gcc leaves a trailing carriage return which upsets mingw + ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; + *) + ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; + esac + case $ac_prog in + # Accept absolute paths. + [[\\/]]* | ?:[[\\/]]*) + re_direlt='/[[^/]][[^/]]*/\.\./' + # Canonicalize the pathname of ld + ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'` + while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do + ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` + done + test -z "$LD" && LD="$ac_prog" + ;; + "") + # If it fails, then pretend we aren't using GCC. + ac_prog=ld + ;; + *) + # If it is relative, then search for the first ld in PATH. + with_gnu_ld=unknown + ;; + esac +elif test "$with_gnu_ld" = yes; then + AC_MSG_CHECKING([for GNU ld]) +else + AC_MSG_CHECKING([for non-GNU ld]) +fi +AC_CACHE_VAL(lt_cv_path_LD, +[if test -z "$LD"; then + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in $PATH; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then + lt_cv_path_LD="$ac_dir/$ac_prog" + # Check to see if the program is GNU ld. I'd rather use --version, + # but apparently some variants of GNU ld only accept -v. + # Break only if it was the GNU/non-GNU ld that we prefer. + case `"$lt_cv_path_LD" -v 2>&1 &1 /dev/null 2>&1; then + lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' + lt_cv_file_magic_cmd='func_win32_libid' + else + # Keep this pattern in sync with the one in func_win32_libid. + lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' + lt_cv_file_magic_cmd='$OBJDUMP -f' + fi + ;; + +cegcc*) + # use the weaker test based on 'objdump'. See mingw*. + lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?' + lt_cv_file_magic_cmd='$OBJDUMP -f' + ;; + +darwin* | rhapsody*) + lt_cv_deplibs_check_method=pass_all + ;; + +freebsd* | dragonfly*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then + case $host_cpu in + i*86 ) + # Not sure whether the presence of OpenBSD here was a mistake. + # Let's accept both of them until this is cleared up. + lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` + ;; + esac + else + lt_cv_deplibs_check_method=pass_all + fi + ;; + +gnu*) + lt_cv_deplibs_check_method=pass_all + ;; + +haiku*) + lt_cv_deplibs_check_method=pass_all + ;; + +hpux10.20* | hpux11*) + lt_cv_file_magic_cmd=/usr/bin/file + case $host_cpu in + ia64*) + lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64' + lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so + ;; + hppa*64*) + [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]'] + lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl + ;; + *) + lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]]\.[[0-9]]) shared library' + lt_cv_file_magic_test_file=/usr/lib/libc.sl + ;; + esac + ;; + +interix[[3-9]]*) + # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here + lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$' + ;; + +irix5* | irix6* | nonstopux*) + case $LD in + *-32|*"-32 ") libmagic=32-bit;; + *-n32|*"-n32 ") libmagic=N32;; + *-64|*"-64 ") libmagic=64-bit;; + *) libmagic=never-match;; + esac + lt_cv_deplibs_check_method=pass_all + ;; + +# This must be Linux ELF. +linux* | k*bsd*-gnu | kopensolaris*-gnu) + lt_cv_deplibs_check_method=pass_all + ;; + +netbsd* | netbsdelf*-gnu) + if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then + lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' + else + lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$' + fi + ;; + +newos6*) + lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=/usr/lib/libnls.so + ;; + +*nto* | *qnx*) + lt_cv_deplibs_check_method=pass_all + ;; + +openbsd*) + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$' + else + lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' + fi + ;; + +osf3* | osf4* | osf5*) + lt_cv_deplibs_check_method=pass_all + ;; + +rdos*) + lt_cv_deplibs_check_method=pass_all + ;; + +solaris*) + lt_cv_deplibs_check_method=pass_all + ;; + +sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) + lt_cv_deplibs_check_method=pass_all + ;; + +sysv4 | sysv4.3*) + case $host_vendor in + motorola) + lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]' + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` + ;; + ncr) + lt_cv_deplibs_check_method=pass_all + ;; + sequent) + lt_cv_file_magic_cmd='/bin/file' + lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' + ;; + sni) + lt_cv_file_magic_cmd='/bin/file' + lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib" + lt_cv_file_magic_test_file=/lib/libc.so + ;; + siemens) + lt_cv_deplibs_check_method=pass_all + ;; + pc) + lt_cv_deplibs_check_method=pass_all + ;; + esac + ;; + +tpf*) + lt_cv_deplibs_check_method=pass_all + ;; +esac +]) + +file_magic_glob= +want_nocaseglob=no +if test "$build" = "$host"; then + case $host_os in + mingw* | pw32*) + if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then + want_nocaseglob=yes + else + file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[[\1]]\/[[\1]]\/g;/g"` + fi + ;; + esac +fi + +file_magic_cmd=$lt_cv_file_magic_cmd +deplibs_check_method=$lt_cv_deplibs_check_method +test -z "$deplibs_check_method" && deplibs_check_method=unknown + +_LT_DECL([], [deplibs_check_method], [1], + [Method to check whether dependent libraries are shared objects]) +_LT_DECL([], [file_magic_cmd], [1], + [Command to use when deplibs_check_method = "file_magic"]) +_LT_DECL([], [file_magic_glob], [1], + [How to find potential files when deplibs_check_method = "file_magic"]) +_LT_DECL([], [want_nocaseglob], [1], + [Find potential files using nocaseglob when deplibs_check_method = "file_magic"]) +])# _LT_CHECK_MAGIC_METHOD + + +# LT_PATH_NM +# ---------- +# find the pathname to a BSD- or MS-compatible name lister +AC_DEFUN([LT_PATH_NM], +[AC_REQUIRE([AC_PROG_CC])dnl +AC_CACHE_CHECK([for BSD- or MS-compatible name lister (nm)], lt_cv_path_NM, +[if test -n "$NM"; then + # Let the user override the test. + lt_cv_path_NM="$NM" +else + lt_nm_to_check="${ac_tool_prefix}nm" + if test -n "$ac_tool_prefix" && test "$build" = "$host"; then + lt_nm_to_check="$lt_nm_to_check nm" + fi + for lt_tmp_nm in $lt_nm_to_check; do + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + tmp_nm="$ac_dir/$lt_tmp_nm" + if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then + # Check to see if the nm accepts a BSD-compat flag. + # Adding the `sed 1q' prevents false positives on HP-UX, which says: + # nm: unknown option "B" ignored + # Tru64's nm complains that /dev/null is an invalid object file + case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in + */dev/null* | *'Invalid file or object type'*) + lt_cv_path_NM="$tmp_nm -B" + break + ;; + *) + case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in + */dev/null*) + lt_cv_path_NM="$tmp_nm -p" + break + ;; + *) + lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but + continue # so that we can try to find one that supports BSD flags + ;; + esac + ;; + esac + fi + done + IFS="$lt_save_ifs" + done + : ${lt_cv_path_NM=no} +fi]) +if test "$lt_cv_path_NM" != "no"; then + NM="$lt_cv_path_NM" +else + # Didn't find any BSD compatible name lister, look for dumpbin. + if test -n "$DUMPBIN"; then : + # Let the user override the test. + else + AC_CHECK_TOOLS(DUMPBIN, [dumpbin "link -dump"], :) + case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in + *COFF*) + DUMPBIN="$DUMPBIN -symbols" + ;; + *) + DUMPBIN=: + ;; + esac + fi + AC_SUBST([DUMPBIN]) + if test "$DUMPBIN" != ":"; then + NM="$DUMPBIN" + fi +fi +test -z "$NM" && NM=nm +AC_SUBST([NM]) +_LT_DECL([], [NM], [1], [A BSD- or MS-compatible name lister])dnl + +AC_CACHE_CHECK([the name lister ($NM) interface], [lt_cv_nm_interface], + [lt_cv_nm_interface="BSD nm" + echo "int some_variable = 0;" > conftest.$ac_ext + (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&AS_MESSAGE_LOG_FD) + (eval "$ac_compile" 2>conftest.err) + cat conftest.err >&AS_MESSAGE_LOG_FD + (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD) + (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) + cat conftest.err >&AS_MESSAGE_LOG_FD + (eval echo "\"\$as_me:$LINENO: output\"" >&AS_MESSAGE_LOG_FD) + cat conftest.out >&AS_MESSAGE_LOG_FD + if $GREP 'External.*some_variable' conftest.out > /dev/null; then + lt_cv_nm_interface="MS dumpbin" + fi + rm -f conftest*]) +])# LT_PATH_NM + +# Old names: +AU_ALIAS([AM_PROG_NM], [LT_PATH_NM]) +AU_ALIAS([AC_PROG_NM], [LT_PATH_NM]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AM_PROG_NM], []) +dnl AC_DEFUN([AC_PROG_NM], []) + +# _LT_CHECK_SHAREDLIB_FROM_LINKLIB +# -------------------------------- +# how to determine the name of the shared library +# associated with a specific link library. +# -- PORTME fill in with the dynamic library characteristics +m4_defun([_LT_CHECK_SHAREDLIB_FROM_LINKLIB], +[m4_require([_LT_DECL_EGREP]) +m4_require([_LT_DECL_OBJDUMP]) +m4_require([_LT_DECL_DLLTOOL]) +AC_CACHE_CHECK([how to associate runtime and link libraries], +lt_cv_sharedlib_from_linklib_cmd, +[lt_cv_sharedlib_from_linklib_cmd='unknown' + +case $host_os in +cygwin* | mingw* | pw32* | cegcc*) + # two different shell functions defined in ltmain.sh + # decide which to use based on capabilities of $DLLTOOL + case `$DLLTOOL --help 2>&1` in + *--identify-strict*) + lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib + ;; + *) + lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback + ;; + esac + ;; +*) + # fallback: assume linklib IS sharedlib + lt_cv_sharedlib_from_linklib_cmd="$ECHO" + ;; +esac +]) +sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd +test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO + +_LT_DECL([], [sharedlib_from_linklib_cmd], [1], + [Command to associate shared and link libraries]) +])# _LT_CHECK_SHAREDLIB_FROM_LINKLIB + + +# _LT_PATH_MANIFEST_TOOL +# ---------------------- +# locate the manifest tool +m4_defun([_LT_PATH_MANIFEST_TOOL], +[AC_CHECK_TOOL(MANIFEST_TOOL, mt, :) +test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt +AC_CACHE_CHECK([if $MANIFEST_TOOL is a manifest tool], [lt_cv_path_mainfest_tool], + [lt_cv_path_mainfest_tool=no + echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&AS_MESSAGE_LOG_FD + $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out + cat conftest.err >&AS_MESSAGE_LOG_FD + if $GREP 'Manifest Tool' conftest.out > /dev/null; then + lt_cv_path_mainfest_tool=yes + fi + rm -f conftest*]) +if test "x$lt_cv_path_mainfest_tool" != xyes; then + MANIFEST_TOOL=: +fi +_LT_DECL([], [MANIFEST_TOOL], [1], [Manifest tool])dnl +])# _LT_PATH_MANIFEST_TOOL + + +# LT_LIB_M +# -------- +# check for math library +AC_DEFUN([LT_LIB_M], +[AC_REQUIRE([AC_CANONICAL_HOST])dnl +LIBM= +case $host in +*-*-beos* | *-*-cegcc* | *-*-cygwin* | *-*-haiku* | *-*-pw32* | *-*-darwin*) + # These system don't have libm, or don't need it + ;; +*-ncr-sysv4.3*) + AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw") + AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm") + ;; +*) + AC_CHECK_LIB(m, cos, LIBM="-lm") + ;; +esac +AC_SUBST([LIBM]) +])# LT_LIB_M + +# Old name: +AU_ALIAS([AC_CHECK_LIBM], [LT_LIB_M]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_CHECK_LIBM], []) + + +# _LT_COMPILER_NO_RTTI([TAGNAME]) +# ------------------------------- +m4_defun([_LT_COMPILER_NO_RTTI], +[m4_require([_LT_TAG_COMPILER])dnl + +_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= + +if test "$GCC" = yes; then + case $cc_basename in + nvcc*) + _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -Xcompiler -fno-builtin' ;; + *) + _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' ;; + esac + + _LT_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions], + lt_cv_prog_compiler_rtti_exceptions, + [-fno-rtti -fno-exceptions], [], + [_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"]) +fi +_LT_TAGDECL([no_builtin_flag], [lt_prog_compiler_no_builtin_flag], [1], + [Compiler flag to turn off builtin functions]) +])# _LT_COMPILER_NO_RTTI + + +# _LT_CMD_GLOBAL_SYMBOLS +# ---------------------- +m4_defun([_LT_CMD_GLOBAL_SYMBOLS], +[AC_REQUIRE([AC_CANONICAL_HOST])dnl +AC_REQUIRE([AC_PROG_CC])dnl +AC_REQUIRE([AC_PROG_AWK])dnl +AC_REQUIRE([LT_PATH_NM])dnl +AC_REQUIRE([LT_PATH_LD])dnl +m4_require([_LT_DECL_SED])dnl +m4_require([_LT_DECL_EGREP])dnl +m4_require([_LT_TAG_COMPILER])dnl + +# Check for command to grab the raw symbol name followed by C symbol from nm. +AC_MSG_CHECKING([command to parse $NM output from $compiler object]) +AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe], +[ +# These are sane defaults that work on at least a few old systems. +# [They come from Ultrix. What could be older than Ultrix?!! ;)] + +# Character class describing NM global symbol codes. +symcode='[[BCDEGRST]]' + +# Regexp to match symbols that can be accessed directly from C. +sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)' + +# Define system-specific variables. +case $host_os in +aix*) + symcode='[[BCDT]]' + ;; +cygwin* | mingw* | pw32* | cegcc*) + symcode='[[ABCDGISTW]]' + ;; +hpux*) + if test "$host_cpu" = ia64; then + symcode='[[ABCDEGRST]]' + fi + ;; +irix* | nonstopux*) + symcode='[[BCDEGRST]]' + ;; +osf*) + symcode='[[BCDEGQRST]]' + ;; +solaris*) + symcode='[[BDRT]]' + ;; +sco3.2v5*) + symcode='[[DT]]' + ;; +sysv4.2uw2*) + symcode='[[DT]]' + ;; +sysv5* | sco5v6* | unixware* | OpenUNIX*) + symcode='[[ABDT]]' + ;; +sysv4) + symcode='[[DFNSTU]]' + ;; +esac + +# If we're using GNU nm, then use its standard symbol codes. +case `$NM -V 2>&1` in +*GNU* | *'with BFD'*) + symcode='[[ABCDGIRSTW]]' ;; +esac + +# Transform an extracted symbol line into a proper C declaration. +# Some systems (esp. on ia64) link data and code symbols differently, +# so use this general approach. +lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" + +# Transform an extracted symbol line into symbol name and symbol address +lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p'" +lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \(lib[[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"lib\2\", (void *) \&\2},/p'" + +# Handle CRLF in mingw tool chain +opt_cr= +case $build_os in +mingw*) + opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp + ;; +esac + +# Try without a prefix underscore, then with it. +for ac_symprfx in "" "_"; do + + # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. + symxfrm="\\1 $ac_symprfx\\2 \\2" + + # Write the raw and C identifiers. + if test "$lt_cv_nm_interface" = "MS dumpbin"; then + # Fake it for dumpbin and say T for any non-static function + # and D for any global variable. + # Also find C++ and __fastcall symbols from MSVC++, + # which start with @ or ?. + lt_cv_sys_global_symbol_pipe="$AWK ['"\ +" {last_section=section; section=\$ 3};"\ +" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\ +" \$ 0!~/External *\|/{next};"\ +" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\ +" {if(hide[section]) next};"\ +" {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\ +" {split(\$ 0, a, /\||\r/); split(a[2], s)};"\ +" s[1]~/^[@?]/{print s[1], s[1]; next};"\ +" s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\ +" ' prfx=^$ac_symprfx]" + else + lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" + fi + lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'" + + # Check to see that the pipe works correctly. + pipe_works=no + + rm -f conftest* + cat > conftest.$ac_ext <<_LT_EOF +#ifdef __cplusplus +extern "C" { +#endif +char nm_test_var; +void nm_test_func(void); +void nm_test_func(void){} +#ifdef __cplusplus +} +#endif +int main(){nm_test_var='a';nm_test_func();return(0);} +_LT_EOF + + if AC_TRY_EVAL(ac_compile); then + # Now try to grab the symbols. + nlist=conftest.nm + if AC_TRY_EVAL(NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) && test -s "$nlist"; then + # Try sorting and uniquifying the output. + if sort "$nlist" | uniq > "$nlist"T; then + mv -f "$nlist"T "$nlist" + else + rm -f "$nlist"T + fi + + # Make sure that we snagged all the symbols we need. + if $GREP ' nm_test_var$' "$nlist" >/dev/null; then + if $GREP ' nm_test_func$' "$nlist" >/dev/null; then + cat <<_LT_EOF > conftest.$ac_ext +/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ +#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE) +/* DATA imports from DLLs on WIN32 con't be const, because runtime + relocations are performed -- see ld's documentation on pseudo-relocs. */ +# define LT@&t@_DLSYM_CONST +#elif defined(__osf__) +/* This system does not cope well with relocations in const data. */ +# define LT@&t@_DLSYM_CONST +#else +# define LT@&t@_DLSYM_CONST const +#endif + +#ifdef __cplusplus +extern "C" { +#endif + +_LT_EOF + # Now generate the symbol file. + eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext' + + cat <<_LT_EOF >> conftest.$ac_ext + +/* The mapping between symbol names and symbols. */ +LT@&t@_DLSYM_CONST struct { + const char *name; + void *address; +} +lt__PROGRAM__LTX_preloaded_symbols[[]] = +{ + { "@PROGRAM@", (void *) 0 }, +_LT_EOF + $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext + cat <<\_LT_EOF >> conftest.$ac_ext + {0, (void *) 0} +}; + +/* This works around a problem in FreeBSD linker */ +#ifdef FREEBSD_WORKAROUND +static const void *lt_preloaded_setup() { + return lt__PROGRAM__LTX_preloaded_symbols; +} +#endif + +#ifdef __cplusplus +} +#endif +_LT_EOF + # Now try linking the two files. + mv conftest.$ac_objext conftstm.$ac_objext + lt_globsym_save_LIBS=$LIBS + lt_globsym_save_CFLAGS=$CFLAGS + LIBS="conftstm.$ac_objext" + CFLAGS="$CFLAGS$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)" + if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then + pipe_works=yes + fi + LIBS=$lt_globsym_save_LIBS + CFLAGS=$lt_globsym_save_CFLAGS + else + echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD + fi + else + echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD + fi + else + echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD + fi + else + echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD + cat conftest.$ac_ext >&5 + fi + rm -rf conftest* conftst* + + # Do not use the global_symbol_pipe unless it works. + if test "$pipe_works" = yes; then + break + else + lt_cv_sys_global_symbol_pipe= + fi +done +]) +if test -z "$lt_cv_sys_global_symbol_pipe"; then + lt_cv_sys_global_symbol_to_cdecl= +fi +if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then + AC_MSG_RESULT(failed) +else + AC_MSG_RESULT(ok) +fi + +# Response file support. +if test "$lt_cv_nm_interface" = "MS dumpbin"; then + nm_file_list_spec='@' +elif $NM --help 2>/dev/null | grep '[[@]]FILE' >/dev/null; then + nm_file_list_spec='@' +fi + +_LT_DECL([global_symbol_pipe], [lt_cv_sys_global_symbol_pipe], [1], + [Take the output of nm and produce a listing of raw symbols and C names]) +_LT_DECL([global_symbol_to_cdecl], [lt_cv_sys_global_symbol_to_cdecl], [1], + [Transform the output of nm in a proper C declaration]) +_LT_DECL([global_symbol_to_c_name_address], + [lt_cv_sys_global_symbol_to_c_name_address], [1], + [Transform the output of nm in a C name address pair]) +_LT_DECL([global_symbol_to_c_name_address_lib_prefix], + [lt_cv_sys_global_symbol_to_c_name_address_lib_prefix], [1], + [Transform the output of nm in a C name address pair when lib prefix is needed]) +_LT_DECL([], [nm_file_list_spec], [1], + [Specify filename containing input files for $NM]) +]) # _LT_CMD_GLOBAL_SYMBOLS + + +# _LT_COMPILER_PIC([TAGNAME]) +# --------------------------- +m4_defun([_LT_COMPILER_PIC], +[m4_require([_LT_TAG_COMPILER])dnl +_LT_TAGVAR(lt_prog_compiler_wl, $1)= +_LT_TAGVAR(lt_prog_compiler_pic, $1)= +_LT_TAGVAR(lt_prog_compiler_static, $1)= + +m4_if([$1], [CXX], [ + # C++ specific cases for pic, static, wl, etc. + if test "$GXX" = yes; then + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' + + case $host_os in + aix*) + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + fi + ;; + + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + m68k) + # FIXME: we need at least 68020 code to build shared libraries, but + # adding the `-m68020' flag to GCC prevents building anything better, + # like `-m68040'. + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' + ;; + esac + ;; + + beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) + # PIC is the default for these OSes. + ;; + mingw* | cygwin* | os2* | pw32* | cegcc*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + # Although the cygwin gcc ignores -fPIC, still need this for old-style + # (--disable-auto-import) libraries + m4_if([$1], [GCJ], [], + [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) + ;; + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' + ;; + *djgpp*) + # DJGPP does not support shared libraries at all + _LT_TAGVAR(lt_prog_compiler_pic, $1)= + ;; + haiku*) + # PIC is the default for Haiku. + # The "-static" flag exists, but is broken. + _LT_TAGVAR(lt_prog_compiler_static, $1)= + ;; + interix[[3-9]]*) + # Interix 3.x gcc -fpic/-fPIC options generate broken code. + # Instead, we relocate shared libraries at runtime. + ;; + sysv4*MP*) + if test -d /usr/nec; then + _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic + fi + ;; + hpux*) + # PIC is the default for 64-bit PA HP-UX, but not for 32-bit + # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag + # sets the default TLS model and affects inlining. + case $host_cpu in + hppa*64*) + ;; + *) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + esac + ;; + *qnx* | *nto*) + # QNX uses GNU C++, but need to define -shared option too, otherwise + # it will coredump. + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' + ;; + *) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + esac + else + case $host_os in + aix[[4-9]]*) + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + else + _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' + fi + ;; + chorus*) + case $cc_basename in + cxch68*) + # Green Hills C++ Compiler + # _LT_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a" + ;; + esac + ;; + mingw* | cygwin* | os2* | pw32* | cegcc*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + m4_if([$1], [GCJ], [], + [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) + ;; + dgux*) + case $cc_basename in + ec++*) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + ;; + ghcx*) + # Green Hills C++ Compiler + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + ;; + *) + ;; + esac + ;; + freebsd* | dragonfly*) + # FreeBSD uses GNU C++ + ;; + hpux9* | hpux10* | hpux11*) + case $cc_basename in + CC*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' + if test "$host_cpu" != ia64; then + _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' + fi + ;; + aCC*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' + case $host_cpu in + hppa*64*|ia64*) + # +Z the default + ;; + *) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' + ;; + esac + ;; + *) + ;; + esac + ;; + interix*) + # This is c89, which is MS Visual C++ (no shared libs) + # Anyone wants to do a port? + ;; + irix5* | irix6* | nonstopux*) + case $cc_basename in + CC*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + # CC pic flag -KPIC is the default. + ;; + *) + ;; + esac + ;; + linux* | k*bsd*-gnu | kopensolaris*-gnu) + case $cc_basename in + KCC*) + # KAI C++ Compiler + _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + ecpc* ) + # old Intel C++ for x86_64 which still supported -KPIC. + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' + ;; + icpc* ) + # Intel C++, used to be incompatible with GCC. + # ICC 10 doesn't accept -KPIC any more. + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' + ;; + pgCC* | pgcpp*) + # Portland Group C++ compiler + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + cxx*) + # Compaq C++ + # Make sure the PIC flag is empty. It appears that all Alpha + # Linux and Compaq Tru64 Unix objects are PIC. + _LT_TAGVAR(lt_prog_compiler_pic, $1)= + _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + xlc* | xlC* | bgxl[[cC]]* | mpixl[[cC]]*) + # IBM XL 8.0, 9.0 on PPC and BlueGene + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink' + ;; + *) + case `$CC -V 2>&1 | sed 5q` in + *Sun\ C*) + # Sun C++ 5.9 + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' + ;; + esac + ;; + esac + ;; + lynxos*) + ;; + m88k*) + ;; + mvs*) + case $cc_basename in + cxx*) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall' + ;; + *) + ;; + esac + ;; + netbsd* | netbsdelf*-gnu) + ;; + *qnx* | *nto*) + # QNX uses GNU C++, but need to define -shared option too, otherwise + # it will coredump. + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' + ;; + osf3* | osf4* | osf5*) + case $cc_basename in + KCC*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' + ;; + RCC*) + # Rational C++ 2.4.1 + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + ;; + cxx*) + # Digital/Compaq C++ + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # Make sure the PIC flag is empty. It appears that all Alpha + # Linux and Compaq Tru64 Unix objects are PIC. + _LT_TAGVAR(lt_prog_compiler_pic, $1)= + _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + *) + ;; + esac + ;; + psos*) + ;; + solaris*) + case $cc_basename in + CC* | sunCC*) + # Sun C++ 4.2, 5.x and Centerline C++ + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' + ;; + gcx*) + # Green Hills C++ Compiler + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' + ;; + *) + ;; + esac + ;; + sunos4*) + case $cc_basename in + CC*) + # Sun C++ 4.x + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + lcc*) + # Lucid + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + ;; + *) + ;; + esac + ;; + sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) + case $cc_basename in + CC*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + esac + ;; + tandem*) + case $cc_basename in + NCC*) + # NonStop-UX NCC 3.20 + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + ;; + *) + ;; + esac + ;; + vxworks*) + ;; + *) + _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no + ;; + esac + fi +], +[ + if test "$GCC" = yes; then + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' + + case $host_os in + aix*) + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + fi + ;; + + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + m68k) + # FIXME: we need at least 68020 code to build shared libraries, but + # adding the `-m68020' flag to GCC prevents building anything better, + # like `-m68040'. + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' + ;; + esac + ;; + + beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) + # PIC is the default for these OSes. + ;; + + mingw* | cygwin* | pw32* | os2* | cegcc*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + # Although the cygwin gcc ignores -fPIC, still need this for old-style + # (--disable-auto-import) libraries + m4_if([$1], [GCJ], [], + [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) + ;; + + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' + ;; + + haiku*) + # PIC is the default for Haiku. + # The "-static" flag exists, but is broken. + _LT_TAGVAR(lt_prog_compiler_static, $1)= + ;; + + hpux*) + # PIC is the default for 64-bit PA HP-UX, but not for 32-bit + # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag + # sets the default TLS model and affects inlining. + case $host_cpu in + hppa*64*) + # +Z the default + ;; + *) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + esac + ;; + + interix[[3-9]]*) + # Interix 3.x gcc -fpic/-fPIC options generate broken code. + # Instead, we relocate shared libraries at runtime. + ;; + + msdosdjgpp*) + # Just because we use GCC doesn't mean we suddenly get shared libraries + # on systems that don't support them. + _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no + enable_shared=no + ;; + + *nto* | *qnx*) + # QNX uses GNU C++, but need to define -shared option too, otherwise + # it will coredump. + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' + ;; + + sysv4*MP*) + if test -d /usr/nec; then + _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic + fi + ;; + + *) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + esac + + case $cc_basename in + nvcc*) # Cuda Compiler Driver 2.2 + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Xlinker ' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-Xcompiler -fPIC' + ;; + esac + else + # PORTME Check for flag to pass linker flags through the system compiler. + case $host_os in + aix*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + else + _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' + fi + ;; + + mingw* | cygwin* | pw32* | os2* | cegcc*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + m4_if([$1], [GCJ], [], + [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) + ;; + + hpux9* | hpux10* | hpux11*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but + # not for PA HP-UX. + case $host_cpu in + hppa*64*|ia64*) + # +Z the default + ;; + *) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' + ;; + esac + # Is there a better lt_prog_compiler_static that works with the bundled CC? + _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' + ;; + + irix5* | irix6* | nonstopux*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # PIC (with -KPIC) is the default. + _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + + linux* | k*bsd*-gnu | kopensolaris*-gnu) + case $cc_basename in + # old Intel for x86_64 which still supported -KPIC. + ecc*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' + ;; + # icc used to be incompatible with GCC. + # ICC 10 doesn't accept -KPIC any more. + icc* | ifort*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' + ;; + # Lahey Fortran 8.1. + lf95*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='--shared' + _LT_TAGVAR(lt_prog_compiler_static, $1)='--static' + ;; + nagfor*) + # NAG Fortran compiler + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,-Wl,,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*) + # Portland Group compilers (*not* the Pentium gcc compiler, + # which looks to be a dead project) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + ccc*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # All Alpha code is PIC. + _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + xl* | bgxl* | bgf* | mpixl*) + # IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink' + ;; + *) + case `$CC -V 2>&1 | sed 5q` in + *Sun\ F* | *Sun*Fortran*) + # Sun Fortran 8.3 passes all unrecognized flags to the linker + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + _LT_TAGVAR(lt_prog_compiler_wl, $1)='' + ;; + *Sun\ C*) + # Sun C 5.9 + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + ;; + esac + ;; + esac + ;; + + newsos6) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + + *nto* | *qnx*) + # QNX uses GNU C++, but need to define -shared option too, otherwise + # it will coredump. + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' + ;; + + osf3* | osf4* | osf5*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # All OSF/1 code is PIC. + _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + + rdos*) + _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + + solaris*) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + case $cc_basename in + f77* | f90* | f95* | sunf77* | sunf90* | sunf95*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';; + *) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';; + esac + ;; + + sunos4*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + + sysv4 | sysv4.2uw2* | sysv4.3*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + + sysv4*MP*) + if test -d /usr/nec ;then + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + fi + ;; + + sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + + unicos*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no + ;; + + uts4*) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + + *) + _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no + ;; + esac + fi +]) +case $host_os in + # For platforms which do not support PIC, -DPIC is meaningless: + *djgpp*) + _LT_TAGVAR(lt_prog_compiler_pic, $1)= + ;; + *) + _LT_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])" + ;; +esac + +AC_CACHE_CHECK([for $compiler option to produce PIC], + [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)], + [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_prog_compiler_pic, $1)]) +_LT_TAGVAR(lt_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_cv_prog_compiler_pic, $1) + +# +# Check to make sure the PIC flag actually works. +# +if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then + _LT_COMPILER_OPTION([if $compiler PIC flag $_LT_TAGVAR(lt_prog_compiler_pic, $1) works], + [_LT_TAGVAR(lt_cv_prog_compiler_pic_works, $1)], + [$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])], [], + [case $_LT_TAGVAR(lt_prog_compiler_pic, $1) in + "" | " "*) ;; + *) _LT_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_TAGVAR(lt_prog_compiler_pic, $1)" ;; + esac], + [_LT_TAGVAR(lt_prog_compiler_pic, $1)= + _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no]) +fi +_LT_TAGDECL([pic_flag], [lt_prog_compiler_pic], [1], + [Additional compiler flags for building library objects]) + +_LT_TAGDECL([wl], [lt_prog_compiler_wl], [1], + [How to pass a linker flag through the compiler]) +# +# Check to make sure the static flag actually works. +# +wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_TAGVAR(lt_prog_compiler_static, $1)\" +_LT_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works], + _LT_TAGVAR(lt_cv_prog_compiler_static_works, $1), + $lt_tmp_static_flag, + [], + [_LT_TAGVAR(lt_prog_compiler_static, $1)=]) +_LT_TAGDECL([link_static_flag], [lt_prog_compiler_static], [1], + [Compiler flag to prevent dynamic linking]) +])# _LT_COMPILER_PIC + + +# _LT_LINKER_SHLIBS([TAGNAME]) +# ---------------------------- +# See if the linker supports building shared libraries. +m4_defun([_LT_LINKER_SHLIBS], +[AC_REQUIRE([LT_PATH_LD])dnl +AC_REQUIRE([LT_PATH_NM])dnl +m4_require([_LT_PATH_MANIFEST_TOOL])dnl +m4_require([_LT_FILEUTILS_DEFAULTS])dnl +m4_require([_LT_DECL_EGREP])dnl +m4_require([_LT_DECL_SED])dnl +m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl +m4_require([_LT_TAG_COMPILER])dnl +AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) +m4_if([$1], [CXX], [ + _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'] + case $host_os in + aix[[4-9]]*) + # If we're using GNU nm, then we don't want the "-C" option. + # -C means demangle to AIX nm, but means don't demangle with GNU nm + # Also, AIX nm treats weak defined symbols like other global defined + # symbols, whereas GNU nm marks them as "W". + if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then + _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' + else + _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' + fi + ;; + pw32*) + _LT_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds" + ;; + cygwin* | mingw* | cegcc*) + case $cc_basename in + cl*) ;; + *) + _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols' + _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'] + ;; + esac + ;; + linux* | k*bsd*-gnu | gnu*) + _LT_TAGVAR(link_all_deplibs, $1)=no + ;; + *) + _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + ;; + esac +], [ + runpath_var= + _LT_TAGVAR(allow_undefined_flag, $1)= + _LT_TAGVAR(always_export_symbols, $1)=no + _LT_TAGVAR(archive_cmds, $1)= + _LT_TAGVAR(archive_expsym_cmds, $1)= + _LT_TAGVAR(compiler_needs_object, $1)=no + _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no + _LT_TAGVAR(export_dynamic_flag_spec, $1)= + _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + _LT_TAGVAR(hardcode_automatic, $1)=no + _LT_TAGVAR(hardcode_direct, $1)=no + _LT_TAGVAR(hardcode_direct_absolute, $1)=no + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= + _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= + _LT_TAGVAR(hardcode_libdir_separator, $1)= + _LT_TAGVAR(hardcode_minus_L, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported + _LT_TAGVAR(inherit_rpath, $1)=no + _LT_TAGVAR(link_all_deplibs, $1)=unknown + _LT_TAGVAR(module_cmds, $1)= + _LT_TAGVAR(module_expsym_cmds, $1)= + _LT_TAGVAR(old_archive_from_new_cmds, $1)= + _LT_TAGVAR(old_archive_from_expsyms_cmds, $1)= + _LT_TAGVAR(thread_safe_flag_spec, $1)= + _LT_TAGVAR(whole_archive_flag_spec, $1)= + # include_expsyms should be a list of space-separated symbols to be *always* + # included in the symbol list + _LT_TAGVAR(include_expsyms, $1)= + # exclude_expsyms can be an extended regexp of symbols to exclude + # it will be wrapped by ` (' and `)$', so one must not match beginning or + # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', + # as well as any symbol that contains `d'. + _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'] + # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out + # platforms (ab)use it in PIC code, but their linkers get confused if + # the symbol is explicitly referenced. Since portable code cannot + # rely on this symbol name, it's probably fine to never include it in + # preloaded symbol tables. + # Exclude shared library initialization/finalization symbols. +dnl Note also adjust exclude_expsyms for C++ above. + extract_expsyms_cmds= + + case $host_os in + cygwin* | mingw* | pw32* | cegcc*) + # FIXME: the MSVC++ port hasn't been tested in a loooong time + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + if test "$GCC" != yes; then + with_gnu_ld=no + fi + ;; + interix*) + # we just hope/assume this is gcc and not c89 (= MSVC++) + with_gnu_ld=yes + ;; + openbsd*) + with_gnu_ld=no + ;; + linux* | k*bsd*-gnu | gnu*) + _LT_TAGVAR(link_all_deplibs, $1)=no + ;; + esac + + _LT_TAGVAR(ld_shlibs, $1)=yes + + # On some targets, GNU ld is compatible enough with the native linker + # that we're better off using the native interface for both. + lt_use_gnu_ld_interface=no + if test "$with_gnu_ld" = yes; then + case $host_os in + aix*) + # The AIX port of GNU ld has always aspired to compatibility + # with the native linker. However, as the warning in the GNU ld + # block says, versions before 2.19.5* couldn't really create working + # shared libraries, regardless of the interface used. + case `$LD -v 2>&1` in + *\ \(GNU\ Binutils\)\ 2.19.5*) ;; + *\ \(GNU\ Binutils\)\ 2.[[2-9]]*) ;; + *\ \(GNU\ Binutils\)\ [[3-9]]*) ;; + *) + lt_use_gnu_ld_interface=yes + ;; + esac + ;; + *) + lt_use_gnu_ld_interface=yes + ;; + esac + fi + + if test "$lt_use_gnu_ld_interface" = yes; then + # If archive_cmds runs LD, not CC, wlarc should be empty + wlarc='${wl}' + + # Set some defaults for GNU ld with shared library support. These + # are reset later if shared libraries are not supported. Putting them + # here allows them to be overridden if necessary. + runpath_var=LD_RUN_PATH + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + # ancient GNU ld didn't support --whole-archive et. al. + if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then + _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + else + _LT_TAGVAR(whole_archive_flag_spec, $1)= + fi + supports_anon_versioning=no + case `$LD -v 2>&1` in + *GNU\ gold*) supports_anon_versioning=yes ;; + *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11 + *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... + *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... + *\ 2.11.*) ;; # other 2.11 versions + *) supports_anon_versioning=yes ;; + esac + + # See if GNU ld supports shared libraries. + case $host_os in + aix[[3-9]]*) + # On AIX/PPC, the GNU linker is very broken + if test "$host_cpu" != ia64; then + _LT_TAGVAR(ld_shlibs, $1)=no + cat <<_LT_EOF 1>&2 + +*** Warning: the GNU linker, at least up to release 2.19, is reported +*** to be unable to reliably create shared libraries on AIX. +*** Therefore, libtool is disabling shared libraries support. If you +*** really care for shared libraries, you may want to install binutils +*** 2.20 or above, or modify your PATH so that a non-GNU linker is found. +*** You will then need to restart the configuration process. + +_LT_EOF + fi + ;; + + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='' + ;; + m68k) + _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_minus_L, $1)=yes + ;; + esac + ;; + + beos*) + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + # Joseph Beckenbach says some releases of gcc + # support --undefined. This deserves some investigation. FIXME + _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + cygwin* | mingw* | pw32* | cegcc*) + # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, + # as there is no search path for DLLs. + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols' + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_TAGVAR(always_export_symbols, $1)=no + _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols' + _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'] + + if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + # If the export-symbols file already is a .def file (1st line + # is EXPORTS), use it as is; otherwise, prepend... + _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then + cp $export_symbols $output_objdir/$soname.def; + else + echo EXPORTS > $output_objdir/$soname.def; + cat $export_symbols >> $output_objdir/$soname.def; + fi~ + $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + haiku*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(link_all_deplibs, $1)=yes + ;; + + interix[[3-9]]*) + _LT_TAGVAR(hardcode_direct, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. + # Instead, shared libraries are loaded at an image base (0x10000000 by + # default) and relocated if they conflict, which is a slow very memory + # consuming and fragmenting process. To avoid this, we pick a random, + # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link + # time. Moving up from 0x10000000 also allows more sbrk(2) space. + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + ;; + + gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu) + tmp_diet=no + if test "$host_os" = linux-dietlibc; then + case $cc_basename in + diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn) + esac + fi + if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \ + && test "$tmp_diet" = no + then + tmp_addflag=' $pic_flag' + tmp_sharedflag='-shared' + case $cc_basename,$host_cpu in + pgcc*) # Portland Group C compiler + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + tmp_addflag=' $pic_flag' + ;; + pgf77* | pgf90* | pgf95* | pgfortran*) + # Portland Group f77 and f90 compilers + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + tmp_addflag=' $pic_flag -Mnomain' ;; + ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 + tmp_addflag=' -i_dynamic' ;; + efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 + tmp_addflag=' -i_dynamic -nofor_main' ;; + ifc* | ifort*) # Intel Fortran compiler + tmp_addflag=' -nofor_main' ;; + lf95*) # Lahey Fortran 8.1 + _LT_TAGVAR(whole_archive_flag_spec, $1)= + tmp_sharedflag='--shared' ;; + xl[[cC]]* | bgxl[[cC]]* | mpixl[[cC]]*) # IBM XL C 8.0 on PPC (deal with xlf below) + tmp_sharedflag='-qmkshrobj' + tmp_addflag= ;; + nvcc*) # Cuda Compiler Driver 2.2 + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + _LT_TAGVAR(compiler_needs_object, $1)=yes + ;; + esac + case `$CC -V 2>&1 | sed 5q` in + *Sun\ C*) # Sun C 5.9 + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + _LT_TAGVAR(compiler_needs_object, $1)=yes + tmp_sharedflag='-G' ;; + *Sun\ F*) # Sun Fortran 8.3 + tmp_sharedflag='-G' ;; + esac + _LT_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + + if test "x$supports_anon_versioning" = xyes; then + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ + $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' + fi + + case $cc_basename in + xlf* | bgf* | bgxlf* | mpixlf*) + # IBM XL Fortran 10.1 on PPC cannot create shared libs itself + _LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= + _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir' + _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib' + if test "x$supports_anon_versioning" = xyes; then + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ + $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' + fi + ;; + esac + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + netbsd* | netbsdelf*-gnu) + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' + wlarc= + else + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + fi + ;; + + solaris*) + if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then + _LT_TAGVAR(ld_shlibs, $1)=no + cat <<_LT_EOF 1>&2 + +*** Warning: The releases 2.8.* of the GNU linker cannot reliably +*** create shared libraries on Solaris systems. Therefore, libtool +*** is disabling shared libraries support. We urge you to upgrade GNU +*** binutils to release 2.9.1 or newer. Another option is to modify +*** your PATH or compiler configuration so that the native linker is +*** used, and then restart. + +_LT_EOF + elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) + case `$LD -v 2>&1` in + *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*) + _LT_TAGVAR(ld_shlibs, $1)=no + cat <<_LT_EOF 1>&2 + +*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not +*** reliably create shared libraries on SCO systems. Therefore, libtool +*** is disabling shared libraries support. We urge you to upgrade GNU +*** binutils to release 2.16.91.0.3 or newer. Another option is to modify +*** your PATH or compiler configuration so that the native linker is +*** used, and then restart. + +_LT_EOF + ;; + *) + # For security reasons, it is highly recommended that you always + # use absolute paths for naming shared libraries, and exclude the + # DT_RUNPATH tag from executables and libraries. But doing so + # requires that you compile everything twice, which is a pain. + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + ;; + + sunos4*) + _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' + wlarc= + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + *) + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + + if test "$_LT_TAGVAR(ld_shlibs, $1)" = no; then + runpath_var= + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= + _LT_TAGVAR(export_dynamic_flag_spec, $1)= + _LT_TAGVAR(whole_archive_flag_spec, $1)= + fi + else + # PORTME fill in a description of your system's linker (not GNU ld) + case $host_os in + aix3*) + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_TAGVAR(always_export_symbols, $1)=yes + _LT_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' + # Note: this linker hardcodes the directories in LIBPATH if there + # are no directories specified by -L. + _LT_TAGVAR(hardcode_minus_L, $1)=yes + if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then + # Neither direct hardcoding nor static linking is supported with a + # broken collect2. + _LT_TAGVAR(hardcode_direct, $1)=unsupported + fi + ;; + + aix[[4-9]]*) + if test "$host_cpu" = ia64; then + # On IA64, the linker does run time linking by default, so we don't + # have to do anything special. + aix_use_runtimelinking=no + exp_sym_flag='-Bexport' + no_entry_flag="" + else + # If we're using GNU nm, then we don't want the "-C" option. + # -C means demangle to AIX nm, but means don't demangle with GNU nm + # Also, AIX nm treats weak defined symbols like other global + # defined symbols, whereas GNU nm marks them as "W". + if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then + _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' + else + _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' + fi + aix_use_runtimelinking=no + + # Test if we are trying to use run time linking or normal + # AIX style linking. If -brtl is somewhere in LDFLAGS, we + # need to do runtime linking. + case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*) + for ld_flag in $LDFLAGS; do + if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then + aix_use_runtimelinking=yes + break + fi + done + ;; + esac + + exp_sym_flag='-bexport' + no_entry_flag='-bnoentry' + fi + + # When large executables or shared objects are built, AIX ld can + # have problems creating the table of contents. If linking a library + # or program results in "error TOC overflow" add -mminimal-toc to + # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not + # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. + + _LT_TAGVAR(archive_cmds, $1)='' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_direct_absolute, $1)=yes + _LT_TAGVAR(hardcode_libdir_separator, $1)=':' + _LT_TAGVAR(link_all_deplibs, $1)=yes + _LT_TAGVAR(file_list_spec, $1)='${wl}-f,' + + if test "$GCC" = yes; then + case $host_os in aix4.[[012]]|aix4.[[012]].*) + # We only want to do this on AIX 4.2 and lower, the check + # below for broken collect2 doesn't work under 4.3+ + collect2name=`${CC} -print-prog-name=collect2` + if test -f "$collect2name" && + strings "$collect2name" | $GREP resolve_lib_name >/dev/null + then + # We have reworked collect2 + : + else + # We have old collect2 + _LT_TAGVAR(hardcode_direct, $1)=unsupported + # It fails to find uninstalled libraries when the uninstalled + # path is not listed in the libpath. Setting hardcode_minus_L + # to unsupported forces relinking + _LT_TAGVAR(hardcode_minus_L, $1)=yes + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)= + fi + ;; + esac + shared_flag='-shared' + if test "$aix_use_runtimelinking" = yes; then + shared_flag="$shared_flag "'${wl}-G' + fi + _LT_TAGVAR(link_all_deplibs, $1)=no + else + # not using gcc + if test "$host_cpu" = ia64; then + # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release + # chokes on -Wl,-G. The following line is correct: + shared_flag='-G' + else + if test "$aix_use_runtimelinking" = yes; then + shared_flag='${wl}-G' + else + shared_flag='${wl}-bM:SRE' + fi + fi + fi + + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall' + # It seems that -bexpall does not export symbols beginning with + # underscore (_), so it is better to generate a list of symbols to export. + _LT_TAGVAR(always_export_symbols, $1)=yes + if test "$aix_use_runtimelinking" = yes; then + # Warning - without using the other runtime loading flags (-brtl), + # -berok will link without error, but may produce a broken library. + _LT_TAGVAR(allow_undefined_flag, $1)='-berok' + # Determine the default libpath from the value encoded in an + # empty executable. + _LT_SYS_MODULE_PATH_AIX([$1]) + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" + else + if test "$host_cpu" = ia64; then + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' + _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs" + _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" + else + # Determine the default libpath from the value encoded in an + # empty executable. + _LT_SYS_MODULE_PATH_AIX([$1]) + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" + # Warning - without using the other run time loading flags, + # -berok will link without error, but may produce a broken library. + _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' + _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' + if test "$with_gnu_ld" = yes; then + # We only use this code for GNU lds that support --whole-archive. + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' + else + # Exported symbols can be pulled into shared objects from archives + _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience' + fi + _LT_TAGVAR(archive_cmds_need_lc, $1)=yes + # This is similar to how AIX traditionally builds its shared libraries. + _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + fi + fi + ;; + + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='' + ;; + m68k) + _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_minus_L, $1)=yes + ;; + esac + ;; + + bsdi[[45]]*) + _LT_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic + ;; + + cygwin* | mingw* | pw32* | cegcc*) + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. + case $cc_basename in + cl*) + # Native MSVC + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_TAGVAR(always_export_symbols, $1)=yes + _LT_TAGVAR(file_list_spec, $1)='@' + # Tell ltmain to make .lib files, not .a files. + libext=lib + # Tell ltmain to make .dll files, not .so files. + shrext_cmds=".dll" + # FIXME: Setting linknames here is a bad hack. + _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames=' + _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then + sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp; + else + sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp; + fi~ + $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ + linknames=' + # The linker will not automatically build a static lib if we build a DLL. + # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true' + _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1,DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols' + # Don't use ranlib + _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib' + _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~ + lt_tool_outputfile="@TOOL_OUTPUT@"~ + case $lt_outputfile in + *.exe|*.EXE) ;; + *) + lt_outputfile="$lt_outputfile.exe" + lt_tool_outputfile="$lt_tool_outputfile.exe" + ;; + esac~ + if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then + $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; + $RM "$lt_outputfile.manifest"; + fi' + ;; + *) + # Assume MSVC wrapper + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + # Tell ltmain to make .lib files, not .a files. + libext=lib + # Tell ltmain to make .dll files, not .so files. + shrext_cmds=".dll" + # FIXME: Setting linknames here is a bad hack. + _LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames=' + # The linker will automatically build a .lib file if we build a DLL. + _LT_TAGVAR(old_archive_from_new_cmds, $1)='true' + # FIXME: Should let the user specify the lib program. + _LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs' + _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + ;; + esac + ;; + + darwin* | rhapsody*) + _LT_DARWIN_LINKER_FEATURES($1) + ;; + + dgux*) + _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + freebsd1*) + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + + # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor + # support. Future versions do this automatically, but an explicit c++rt0.o + # does not break anything, and helps significantly (at the cost of a little + # extra space). + freebsd2.2*) + _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + # Unfortunately, older versions of FreeBSD 2 do not have this feature. + freebsd2*) + _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_minus_L, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + # FreeBSD 3 and greater uses gcc -shared to do shared libraries. + freebsd* | dragonfly*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + hpux9*) + if test "$GCC" = yes; then + _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + else + _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + fi + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_TAGVAR(hardcode_direct, $1)=yes + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + _LT_TAGVAR(hardcode_minus_L, $1)=yes + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + ;; + + hpux10*) + if test "$GCC" = yes && test "$with_gnu_ld" = no; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + else + _LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' + fi + if test "$with_gnu_ld" = no; then + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_direct_absolute, $1)=yes + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + _LT_TAGVAR(hardcode_minus_L, $1)=yes + fi + ;; + + hpux11*) + if test "$GCC" = yes && test "$with_gnu_ld" = no; then + case $host_cpu in + hppa*64*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + ia64*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + else + case $host_cpu in + hppa*64*) + _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + ia64*) + _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + m4_if($1, [], [ + # Older versions of the 11.00 compiler do not understand -b yet + # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does) + _LT_LINKER_OPTION([if $CC understands -b], + _LT_TAGVAR(lt_cv_prog_compiler__b, $1), [-b], + [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'], + [_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'])], + [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags']) + ;; + esac + fi + if test "$with_gnu_ld" = no; then + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + + case $host_cpu in + hppa*64*|ia64*) + _LT_TAGVAR(hardcode_direct, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + *) + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_direct_absolute, $1)=yes + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + _LT_TAGVAR(hardcode_minus_L, $1)=yes + ;; + esac + fi + ;; + + irix5* | irix6* | nonstopux*) + if test "$GCC" = yes; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + # Try to use the -exported_symbol ld option, if it does not + # work, assume that -exports_file does not work either and + # implicitly export all symbols. + # This should be the same for all languages, so no per-tag cache variable. + AC_CACHE_CHECK([whether the $host_os linker accepts -exported_symbol], + [lt_cv_irix_exported_symbol], + [save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null" + AC_LINK_IFELSE( + [AC_LANG_SOURCE( + [AC_LANG_CASE([C], [[int foo (void) { return 0; }]], + [C++], [[int foo (void) { return 0; }]], + [Fortran 77], [[ + subroutine foo + end]], + [Fortran], [[ + subroutine foo + end]])])], + [lt_cv_irix_exported_symbol=yes], + [lt_cv_irix_exported_symbol=no]) + LDFLAGS="$save_LDFLAGS"]) + if test "$lt_cv_irix_exported_symbol" = yes; then + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' + fi + else + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib' + fi + _LT_TAGVAR(archive_cmds_need_lc, $1)='no' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_TAGVAR(inherit_rpath, $1)=yes + _LT_TAGVAR(link_all_deplibs, $1)=yes + ;; + + netbsd* | netbsdelf*-gnu) + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out + else + _LT_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF + fi + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + newsos6) + _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + *nto* | *qnx*) + ;; + + openbsd*) + if test -f /usr/libexec/ld.so; then + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_TAGVAR(hardcode_direct_absolute, $1)=yes + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + else + case $host_os in + openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*) + _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + ;; + *) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + ;; + esac + fi + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + os2*) + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_minus_L, $1)=yes + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' + _LT_TAGVAR(old_archive_from_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' + ;; + + osf3*) + if test "$GCC" = yes; then + _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + else + _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + fi + _LT_TAGVAR(archive_cmds_need_lc, $1)='no' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + ;; + + osf4* | osf5*) # as osf3* with the addition of -msym flag + if test "$GCC" = yes; then + _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + else + _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~ + $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp' + + # Both c and cxx compiler support -rpath directly + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' + fi + _LT_TAGVAR(archive_cmds_need_lc, $1)='no' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + ;; + + solaris*) + _LT_TAGVAR(no_undefined_flag, $1)=' -z defs' + if test "$GCC" = yes; then + wlarc='${wl}' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' + else + case `$CC -V 2>&1` in + *"Compilers 5.0"*) + wlarc='' + _LT_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp' + ;; + *) + wlarc='${wl}' + _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' + ;; + esac + fi + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + case $host_os in + solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; + *) + # The compiler driver will combine and reorder linker options, + # but understands `-z linker_flag'. GCC discards it without `$wl', + # but is careful enough not to reorder. + # Supported since Solaris 2.6 (maybe 2.5.1?) + if test "$GCC" = yes; then + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' + else + _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' + fi + ;; + esac + _LT_TAGVAR(link_all_deplibs, $1)=yes + ;; + + sunos4*) + if test "x$host_vendor" = xsequent; then + # Use $CC to link under sequent, because it throws in some extra .o + # files that make .init and .fini sections work. + _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' + else + _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' + fi + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_minus_L, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + sysv4) + case $host_vendor in + sni) + _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_direct, $1)=yes # is this really true??? + ;; + siemens) + ## LD is ld it makes a PLAMLIB + ## CC just makes a GrossModule. + _LT_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs' + _LT_TAGVAR(hardcode_direct, $1)=no + ;; + motorola) + _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie + ;; + esac + runpath_var='LD_RUN_PATH' + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + sysv4.3*) + _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport' + ;; + + sysv4*MP*) + if test -d /usr/nec; then + _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + runpath_var=LD_RUN_PATH + hardcode_runpath_var=yes + _LT_TAGVAR(ld_shlibs, $1)=yes + fi + ;; + + sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*) + _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' + _LT_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + runpath_var='LD_RUN_PATH' + + if test "$GCC" = yes; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + else + _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + fi + ;; + + sysv5* | sco3.2v5* | sco5v6*) + # Note: We can NOT use -z defs as we might desire, because we do not + # link with -lc, and that would cause any symbols used from libc to + # always be unresolved, which means just about no library would + # ever link correctly. If we're not using GNU ld we use -z text + # though, which does catch some bad symbols but isn't as heavy-handed + # as -z defs. + _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' + _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs' + _LT_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=':' + _LT_TAGVAR(link_all_deplibs, $1)=yes + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' + runpath_var='LD_RUN_PATH' + + if test "$GCC" = yes; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + else + _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + fi + ;; + + uts4*) + _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + *) + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + esac + + if test x$host_vendor = xsni; then + case $host in + sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Blargedynsym' + ;; + esac + fi + fi +]) +AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)]) +test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no + +_LT_TAGVAR(with_gnu_ld, $1)=$with_gnu_ld + +_LT_DECL([], [libext], [0], [Old archive suffix (normally "a")])dnl +_LT_DECL([], [shrext_cmds], [1], [Shared library suffix (normally ".so")])dnl +_LT_DECL([], [extract_expsyms_cmds], [2], + [The commands to extract the exported symbol list from a shared archive]) + +# +# Do we need to explicitly link libc? +# +case "x$_LT_TAGVAR(archive_cmds_need_lc, $1)" in +x|xyes) + # Assume -lc should be added + _LT_TAGVAR(archive_cmds_need_lc, $1)=yes + + if test "$enable_shared" = yes && test "$GCC" = yes; then + case $_LT_TAGVAR(archive_cmds, $1) in + *'~'*) + # FIXME: we may have to deal with multi-command sequences. + ;; + '$CC '*) + # Test whether the compiler implicitly links with -lc since on some + # systems, -lgcc has to come before -lc. If gcc already passes -lc + # to ld, don't add -lc before -lgcc. + AC_CACHE_CHECK([whether -lc should be explicitly linked in], + [lt_cv_]_LT_TAGVAR(archive_cmds_need_lc, $1), + [$RM conftest* + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + + if AC_TRY_EVAL(ac_compile) 2>conftest.err; then + soname=conftest + lib=conftest + libobjs=conftest.$ac_objext + deplibs= + wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) + pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1) + compiler_flags=-v + linker_flags=-v + verstring= + output_objdir=. + libname=conftest + lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1) + _LT_TAGVAR(allow_undefined_flag, $1)= + if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) + then + lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=no + else + lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=yes + fi + _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag + else + cat conftest.err 1>&5 + fi + $RM conftest* + ]) + _LT_TAGVAR(archive_cmds_need_lc, $1)=$lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1) + ;; + esac + fi + ;; +esac + +_LT_TAGDECL([build_libtool_need_lc], [archive_cmds_need_lc], [0], + [Whether or not to add -lc for building shared libraries]) +_LT_TAGDECL([allow_libtool_libs_with_static_runtimes], + [enable_shared_with_static_runtimes], [0], + [Whether or not to disallow shared libs when runtime libs are static]) +_LT_TAGDECL([], [export_dynamic_flag_spec], [1], + [Compiler flag to allow reflexive dlopens]) +_LT_TAGDECL([], [whole_archive_flag_spec], [1], + [Compiler flag to generate shared objects directly from archives]) +_LT_TAGDECL([], [compiler_needs_object], [1], + [Whether the compiler copes with passing no objects directly]) +_LT_TAGDECL([], [old_archive_from_new_cmds], [2], + [Create an old-style archive from a shared archive]) +_LT_TAGDECL([], [old_archive_from_expsyms_cmds], [2], + [Create a temporary old-style archive to link instead of a shared archive]) +_LT_TAGDECL([], [archive_cmds], [2], [Commands used to build a shared archive]) +_LT_TAGDECL([], [archive_expsym_cmds], [2]) +_LT_TAGDECL([], [module_cmds], [2], + [Commands used to build a loadable module if different from building + a shared archive.]) +_LT_TAGDECL([], [module_expsym_cmds], [2]) +_LT_TAGDECL([], [with_gnu_ld], [1], + [Whether we are building with GNU ld or not]) +_LT_TAGDECL([], [allow_undefined_flag], [1], + [Flag that allows shared libraries with undefined symbols to be built]) +_LT_TAGDECL([], [no_undefined_flag], [1], + [Flag that enforces no undefined symbols]) +_LT_TAGDECL([], [hardcode_libdir_flag_spec], [1], + [Flag to hardcode $libdir into a binary during linking. + This must work even if $libdir does not exist]) +_LT_TAGDECL([], [hardcode_libdir_flag_spec_ld], [1], + [[If ld is used when linking, flag to hardcode $libdir into a binary + during linking. This must work even if $libdir does not exist]]) +_LT_TAGDECL([], [hardcode_libdir_separator], [1], + [Whether we need a single "-rpath" flag with a separated argument]) +_LT_TAGDECL([], [hardcode_direct], [0], + [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes + DIR into the resulting binary]) +_LT_TAGDECL([], [hardcode_direct_absolute], [0], + [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes + DIR into the resulting binary and the resulting library dependency is + "absolute", i.e impossible to change by setting ${shlibpath_var} if the + library is relocated]) +_LT_TAGDECL([], [hardcode_minus_L], [0], + [Set to "yes" if using the -LDIR flag during linking hardcodes DIR + into the resulting binary]) +_LT_TAGDECL([], [hardcode_shlibpath_var], [0], + [Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR + into the resulting binary]) +_LT_TAGDECL([], [hardcode_automatic], [0], + [Set to "yes" if building a shared library automatically hardcodes DIR + into the library and all subsequent libraries and executables linked + against it]) +_LT_TAGDECL([], [inherit_rpath], [0], + [Set to yes if linker adds runtime paths of dependent libraries + to runtime path list]) +_LT_TAGDECL([], [link_all_deplibs], [0], + [Whether libtool must link a program against all its dependency libraries]) +_LT_TAGDECL([], [always_export_symbols], [0], + [Set to "yes" if exported symbols are required]) +_LT_TAGDECL([], [export_symbols_cmds], [2], + [The commands to list exported symbols]) +_LT_TAGDECL([], [exclude_expsyms], [1], + [Symbols that should not be listed in the preloaded symbols]) +_LT_TAGDECL([], [include_expsyms], [1], + [Symbols that must always be exported]) +_LT_TAGDECL([], [prelink_cmds], [2], + [Commands necessary for linking programs (against libraries) with templates]) +_LT_TAGDECL([], [postlink_cmds], [2], + [Commands necessary for finishing linking programs]) +_LT_TAGDECL([], [file_list_spec], [1], + [Specify filename containing input files]) +dnl FIXME: Not yet implemented +dnl _LT_TAGDECL([], [thread_safe_flag_spec], [1], +dnl [Compiler flag to generate thread safe objects]) +])# _LT_LINKER_SHLIBS + + +# _LT_LANG_C_CONFIG([TAG]) +# ------------------------ +# Ensure that the configuration variables for a C compiler are suitably +# defined. These variables are subsequently used by _LT_CONFIG to write +# the compiler configuration to `libtool'. +m4_defun([_LT_LANG_C_CONFIG], +[m4_require([_LT_DECL_EGREP])dnl +lt_save_CC="$CC" +AC_LANG_PUSH(C) + +# Source file extension for C test sources. +ac_ext=c + +# Object file extension for compiled C test sources. +objext=o +_LT_TAGVAR(objext, $1)=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code="int some_variable = 0;" + +# Code to be used in simple link tests +lt_simple_link_test_code='int main(){return(0);}' + +_LT_TAG_COMPILER +# Save the default compiler, since it gets overwritten when the other +# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP. +compiler_DEFAULT=$CC + +# save warnings/boilerplate of simple test code +_LT_COMPILER_BOILERPLATE +_LT_LINKER_BOILERPLATE + +if test -n "$compiler"; then + _LT_COMPILER_NO_RTTI($1) + _LT_COMPILER_PIC($1) + _LT_COMPILER_C_O($1) + _LT_COMPILER_FILE_LOCKS($1) + _LT_LINKER_SHLIBS($1) + _LT_SYS_DYNAMIC_LINKER($1) + _LT_LINKER_HARDCODE_LIBPATH($1) + LT_SYS_DLOPEN_SELF + _LT_CMD_STRIPLIB + + # Report which library types will actually be built + AC_MSG_CHECKING([if libtool supports shared libraries]) + AC_MSG_RESULT([$can_build_shared]) + + AC_MSG_CHECKING([whether to build shared libraries]) + test "$can_build_shared" = "no" && enable_shared=no + + # On AIX, shared libraries and static libraries use the same namespace, and + # are all built from PIC. + case $host_os in + aix3*) + test "$enable_shared" = yes && enable_static=no + if test -n "$RANLIB"; then + archive_cmds="$archive_cmds~\$RANLIB \$lib" + postinstall_cmds='$RANLIB $lib' + fi + ;; + + aix[[4-9]]*) + if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then + test "$enable_shared" = yes && enable_static=no + fi + ;; + esac + AC_MSG_RESULT([$enable_shared]) + + AC_MSG_CHECKING([whether to build static libraries]) + # Make sure either enable_shared or enable_static is yes. + test "$enable_shared" = yes || enable_static=yes + AC_MSG_RESULT([$enable_static]) + + _LT_CONFIG($1) +fi +AC_LANG_POP +CC="$lt_save_CC" +])# _LT_LANG_C_CONFIG + + +# _LT_LANG_CXX_CONFIG([TAG]) +# -------------------------- +# Ensure that the configuration variables for a C++ compiler are suitably +# defined. These variables are subsequently used by _LT_CONFIG to write +# the compiler configuration to `libtool'. +m4_defun([_LT_LANG_CXX_CONFIG], +[m4_require([_LT_FILEUTILS_DEFAULTS])dnl +m4_require([_LT_DECL_EGREP])dnl +m4_require([_LT_PATH_MANIFEST_TOOL])dnl +if test -n "$CXX" && ( test "X$CXX" != "Xno" && + ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || + (test "X$CXX" != "Xg++"))) ; then + AC_PROG_CXXCPP +else + _lt_caught_CXX_error=yes +fi + +AC_LANG_PUSH(C++) +_LT_TAGVAR(archive_cmds_need_lc, $1)=no +_LT_TAGVAR(allow_undefined_flag, $1)= +_LT_TAGVAR(always_export_symbols, $1)=no +_LT_TAGVAR(archive_expsym_cmds, $1)= +_LT_TAGVAR(compiler_needs_object, $1)=no +_LT_TAGVAR(export_dynamic_flag_spec, $1)= +_LT_TAGVAR(hardcode_direct, $1)=no +_LT_TAGVAR(hardcode_direct_absolute, $1)=no +_LT_TAGVAR(hardcode_libdir_flag_spec, $1)= +_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= +_LT_TAGVAR(hardcode_libdir_separator, $1)= +_LT_TAGVAR(hardcode_minus_L, $1)=no +_LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported +_LT_TAGVAR(hardcode_automatic, $1)=no +_LT_TAGVAR(inherit_rpath, $1)=no +_LT_TAGVAR(module_cmds, $1)= +_LT_TAGVAR(module_expsym_cmds, $1)= +_LT_TAGVAR(link_all_deplibs, $1)=unknown +_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds +_LT_TAGVAR(reload_flag, $1)=$reload_flag +_LT_TAGVAR(reload_cmds, $1)=$reload_cmds +_LT_TAGVAR(no_undefined_flag, $1)= +_LT_TAGVAR(whole_archive_flag_spec, $1)= +_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no + +# Source file extension for C++ test sources. +ac_ext=cpp + +# Object file extension for compiled C++ test sources. +objext=o +_LT_TAGVAR(objext, $1)=$objext + +# No sense in running all these tests if we already determined that +# the CXX compiler isn't working. Some variables (like enable_shared) +# are currently assumed to apply to all compilers on this platform, +# and will be corrupted by setting them based on a non-working compiler. +if test "$_lt_caught_CXX_error" != yes; then + # Code to be used in simple compile tests + lt_simple_compile_test_code="int some_variable = 0;" + + # Code to be used in simple link tests + lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }' + + # ltmain only uses $CC for tagged configurations so make sure $CC is set. + _LT_TAG_COMPILER + + # save warnings/boilerplate of simple test code + _LT_COMPILER_BOILERPLATE + _LT_LINKER_BOILERPLATE + + # Allow CC to be a program name with arguments. + lt_save_CC=$CC + lt_save_CFLAGS=$CFLAGS + lt_save_LD=$LD + lt_save_GCC=$GCC + GCC=$GXX + lt_save_with_gnu_ld=$with_gnu_ld + lt_save_path_LD=$lt_cv_path_LD + if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then + lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx + else + $as_unset lt_cv_prog_gnu_ld + fi + if test -n "${lt_cv_path_LDCXX+set}"; then + lt_cv_path_LD=$lt_cv_path_LDCXX + else + $as_unset lt_cv_path_LD + fi + test -z "${LDCXX+set}" || LD=$LDCXX + CC=${CXX-"c++"} + CFLAGS=$CXXFLAGS + compiler=$CC + _LT_TAGVAR(compiler, $1)=$CC + _LT_CC_BASENAME([$compiler]) + + if test -n "$compiler"; then + # We don't want -fno-exception when compiling C++ code, so set the + # no_builtin_flag separately + if test "$GXX" = yes; then + _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' + else + _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= + fi + + if test "$GXX" = yes; then + # Set up default GNU C++ configuration + + LT_PATH_LD + + # Check if GNU C++ uses GNU ld as the underlying linker, since the + # archiving commands below assume that GNU ld is being used. + if test "$with_gnu_ld" = yes; then + _LT_TAGVAR(archive_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + + # If archive_cmds runs LD, not CC, wlarc should be empty + # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to + # investigate it a little bit more. (MM) + wlarc='${wl}' + + # ancient GNU ld didn't support --whole-archive et. al. + if eval "`$CC -print-prog-name=ld` --help 2>&1" | + $GREP 'no-whole-archive' > /dev/null; then + _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + else + _LT_TAGVAR(whole_archive_flag_spec, $1)= + fi + else + with_gnu_ld=no + wlarc= + + # A generic and very simple default shared library creation + # command for GNU C++ for the case where it uses the native + # linker, instead of GNU ld. If possible, this setting should + # overridden to take advantage of the native linker features on + # the platform it is being used on. + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' + fi + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' + + else + GXX=no + with_gnu_ld=no + wlarc= + fi + + # PORTME: fill in a description of your system's C++ link characteristics + AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) + _LT_TAGVAR(ld_shlibs, $1)=yes + case $host_os in + aix3*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + aix[[4-9]]*) + if test "$host_cpu" = ia64; then + # On IA64, the linker does run time linking by default, so we don't + # have to do anything special. + aix_use_runtimelinking=no + exp_sym_flag='-Bexport' + no_entry_flag="" + else + aix_use_runtimelinking=no + + # Test if we are trying to use run time linking or normal + # AIX style linking. If -brtl is somewhere in LDFLAGS, we + # need to do runtime linking. + case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*) + for ld_flag in $LDFLAGS; do + case $ld_flag in + *-brtl*) + aix_use_runtimelinking=yes + break + ;; + esac + done + ;; + esac + + exp_sym_flag='-bexport' + no_entry_flag='-bnoentry' + fi + + # When large executables or shared objects are built, AIX ld can + # have problems creating the table of contents. If linking a library + # or program results in "error TOC overflow" add -mminimal-toc to + # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not + # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. + + _LT_TAGVAR(archive_cmds, $1)='' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_direct_absolute, $1)=yes + _LT_TAGVAR(hardcode_libdir_separator, $1)=':' + _LT_TAGVAR(link_all_deplibs, $1)=yes + _LT_TAGVAR(file_list_spec, $1)='${wl}-f,' + + if test "$GXX" = yes; then + case $host_os in aix4.[[012]]|aix4.[[012]].*) + # We only want to do this on AIX 4.2 and lower, the check + # below for broken collect2 doesn't work under 4.3+ + collect2name=`${CC} -print-prog-name=collect2` + if test -f "$collect2name" && + strings "$collect2name" | $GREP resolve_lib_name >/dev/null + then + # We have reworked collect2 + : + else + # We have old collect2 + _LT_TAGVAR(hardcode_direct, $1)=unsupported + # It fails to find uninstalled libraries when the uninstalled + # path is not listed in the libpath. Setting hardcode_minus_L + # to unsupported forces relinking + _LT_TAGVAR(hardcode_minus_L, $1)=yes + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)= + fi + esac + shared_flag='-shared' + if test "$aix_use_runtimelinking" = yes; then + shared_flag="$shared_flag "'${wl}-G' + fi + else + # not using gcc + if test "$host_cpu" = ia64; then + # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release + # chokes on -Wl,-G. The following line is correct: + shared_flag='-G' + else + if test "$aix_use_runtimelinking" = yes; then + shared_flag='${wl}-G' + else + shared_flag='${wl}-bM:SRE' + fi + fi + fi + + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall' + # It seems that -bexpall does not export symbols beginning with + # underscore (_), so it is better to generate a list of symbols to + # export. + _LT_TAGVAR(always_export_symbols, $1)=yes + if test "$aix_use_runtimelinking" = yes; then + # Warning - without using the other runtime loading flags (-brtl), + # -berok will link without error, but may produce a broken library. + _LT_TAGVAR(allow_undefined_flag, $1)='-berok' + # Determine the default libpath from the value encoded in an empty + # executable. + _LT_SYS_MODULE_PATH_AIX([$1]) + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" + + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" + else + if test "$host_cpu" = ia64; then + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' + _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs" + _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" + else + # Determine the default libpath from the value encoded in an + # empty executable. + _LT_SYS_MODULE_PATH_AIX([$1]) + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" + # Warning - without using the other run time loading flags, + # -berok will link without error, but may produce a broken library. + _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' + _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' + if test "$with_gnu_ld" = yes; then + # We only use this code for GNU lds that support --whole-archive. + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' + else + # Exported symbols can be pulled into shared objects from archives + _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience' + fi + _LT_TAGVAR(archive_cmds_need_lc, $1)=yes + # This is similar to how AIX traditionally builds its shared + # libraries. + _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + fi + fi + ;; + + beos*) + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + # Joseph Beckenbach says some releases of gcc + # support --undefined. This deserves some investigation. FIXME + _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + chorus*) + case $cc_basename in + *) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + + cygwin* | mingw* | pw32* | cegcc*) + case $GXX,$cc_basename in + ,cl* | no,cl*) + # Native MSVC + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_TAGVAR(always_export_symbols, $1)=yes + _LT_TAGVAR(file_list_spec, $1)='@' + # Tell ltmain to make .lib files, not .a files. + libext=lib + # Tell ltmain to make .dll files, not .so files. + shrext_cmds=".dll" + # FIXME: Setting linknames here is a bad hack. + _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames=' + _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then + $SED -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp; + else + $SED -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp; + fi~ + $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ + linknames=' + # The linker will not automatically build a static lib if we build a DLL. + # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true' + _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + # Don't use ranlib + _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib' + _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~ + lt_tool_outputfile="@TOOL_OUTPUT@"~ + case $lt_outputfile in + *.exe|*.EXE) ;; + *) + lt_outputfile="$lt_outputfile.exe" + lt_tool_outputfile="$lt_tool_outputfile.exe" + ;; + esac~ + func_to_tool_file "$lt_outputfile"~ + if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then + $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; + $RM "$lt_outputfile.manifest"; + fi' + ;; + *) + # g++ + # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, + # as there is no search path for DLLs. + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols' + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_TAGVAR(always_export_symbols, $1)=no + _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + + if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + # If the export-symbols file already is a .def file (1st line + # is EXPORTS), use it as is; otherwise, prepend... + _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then + cp $export_symbols $output_objdir/$soname.def; + else + echo EXPORTS > $output_objdir/$soname.def; + cat $export_symbols >> $output_objdir/$soname.def; + fi~ + $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + ;; + darwin* | rhapsody*) + _LT_DARWIN_LINKER_FEATURES($1) + ;; + + dgux*) + case $cc_basename in + ec++*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + ghcx*) + # Green Hills C++ Compiler + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + *) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + + freebsd[[12]]*) + # C++ shared libraries reported to be fairly broken before + # switch to ELF + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + + freebsd-elf*) + _LT_TAGVAR(archive_cmds_need_lc, $1)=no + ;; + + freebsd* | dragonfly*) + # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF + # conventions + _LT_TAGVAR(ld_shlibs, $1)=yes + ;; + + gnu*) + ;; + + haiku*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(link_all_deplibs, $1)=yes + ;; + + hpux9*) + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, + # but as the default + # location of the library. + + case $cc_basename in + CC*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + aCC*) + _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' + ;; + *) + if test "$GXX" = yes; then + _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + else + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + ;; + + hpux10*|hpux11*) + if test $with_gnu_ld = no; then + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + + case $host_cpu in + hppa*64*|ia64*) + ;; + *) + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + ;; + esac + fi + case $host_cpu in + hppa*64*|ia64*) + _LT_TAGVAR(hardcode_direct, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + *) + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_direct_absolute, $1)=yes + _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, + # but as the default + # location of the library. + ;; + esac + + case $cc_basename in + CC*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + aCC*) + case $host_cpu in + hppa*64*) + _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + ia64*) + _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + *) + _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + esac + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' + ;; + *) + if test "$GXX" = yes; then + if test $with_gnu_ld = no; then + case $host_cpu in + hppa*64*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + ia64*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + *) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + esac + fi + else + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + ;; + + interix[[3-9]]*) + _LT_TAGVAR(hardcode_direct, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. + # Instead, shared libraries are loaded at an image base (0x10000000 by + # default) and relocated if they conflict, which is a slow very memory + # consuming and fragmenting process. To avoid this, we pick a random, + # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link + # time. Moving up from 0x10000000 also allows more sbrk(2) space. + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + ;; + irix5* | irix6*) + case $cc_basename in + CC*) + # SGI C++ + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + + # Archives containing C++ object files must be created using + # "CC -ar", where "CC" is the IRIX C++ compiler. This is + # necessary to make sure instantiated templates are included + # in the archive. + _LT_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs' + ;; + *) + if test "$GXX" = yes; then + if test "$with_gnu_ld" = no; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + else + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` -o $lib' + fi + fi + _LT_TAGVAR(link_all_deplibs, $1)=yes + ;; + esac + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_TAGVAR(inherit_rpath, $1)=yes + ;; + + linux* | k*bsd*-gnu | kopensolaris*-gnu) + case $cc_basename in + KCC*) + # Kuck and Associates, Inc. (KAI) C++ Compiler + + # KCC will only create a shared library if the output file + # ends with ".so" (or ".sl" for HP-UX), so rename the library + # to its proper name (with version) after linking. + _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib' + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' + + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + + # Archives containing C++ object files must be created using + # "CC -Bstatic", where "CC" is the KAI C++ compiler. + _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' + ;; + icpc* | ecpc* ) + # Intel C++ + with_gnu_ld=yes + # version 8.0 and above of icpc choke on multiply defined symbols + # if we add $predep_objects and $postdep_objects, however 7.1 and + # earlier do not add the objects themselves. + case `$CC -V 2>&1` in + *"Version 7."*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + ;; + *) # Version 8.0 or newer + tmp_idyn= + case $host_cpu in + ia64*) tmp_idyn=' -i_dynamic';; + esac + _LT_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + ;; + esac + _LT_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' + ;; + pgCC* | pgcpp*) + # Portland Group C++ compiler + case `$CC -V` in + *pgCC\ [[1-5]].* | *pgcpp\ [[1-5]].*) + _LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~ + rm -rf $tpldir~ + $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~ + compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"' + _LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~ + rm -rf $tpldir~ + $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~ + $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~ + $RANLIB $oldlib' + _LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~ + rm -rf $tpldir~ + $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ + $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~ + rm -rf $tpldir~ + $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ + $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' + ;; + *) # Version 6 and above use weak symbols + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' + ;; + esac + + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + ;; + cxx*) + # Compaq C++ + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols' + + runpath_var=LD_RUN_PATH + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed' + ;; + xl* | mpixl* | bgxl*) + # IBM XL 8.0 on PPC, with GNU ld + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + if test "x$supports_anon_versioning" = xyes; then + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ + $CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' + fi + ;; + *) + case `$CC -V 2>&1 | sed 5q` in + *Sun\ C*) + # Sun C++ 5.9 + _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs' + _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + _LT_TAGVAR(compiler_needs_object, $1)=yes + + # Not sure whether something based on + # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 + # would be better. + output_verbose_link_cmd='func_echo_all' + + # Archives containing C++ object files must be created using + # "CC -xar", where "CC" is the Sun C++ compiler. This is + # necessary to make sure instantiated templates are included + # in the archive. + _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' + ;; + esac + ;; + esac + ;; + + lynxos*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + + m88k*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + + mvs*) + case $cc_basename in + cxx*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + *) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + + netbsd*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags' + wlarc= + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + fi + # Workaround some broken pre-1.5 toolchains + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"' + ;; + + *nto* | *qnx*) + _LT_TAGVAR(ld_shlibs, $1)=yes + ;; + + openbsd2*) + # C++ shared libraries are fairly broken + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + + openbsd*) + if test -f /usr/libexec/ld.so; then + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_TAGVAR(hardcode_direct_absolute, $1)=yes + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + fi + output_verbose_link_cmd=func_echo_all + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + osf3* | osf4* | osf5*) + case $cc_basename in + KCC*) + # Kuck and Associates, Inc. (KAI) C++ Compiler + + # KCC will only create a shared library if the output file + # ends with ".so" (or ".sl" for HP-UX), so rename the library + # to its proper name (with version) after linking. + _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' + + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + + # Archives containing C++ object files must be created using + # the KAI C++ compiler. + case $host in + osf3*) _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;; + *) _LT_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' ;; + esac + ;; + RCC*) + # Rational C++ 2.4.1 + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + cxx*) + case $host in + osf3*) + _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && func_echo_all "${wl}-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + ;; + *) + _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~ + echo "-hidden">> $lib.exp~ + $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~ + $RM $lib.exp' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' + ;; + esac + + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' + ;; + *) + if test "$GXX" = yes && test "$with_gnu_ld" = no; then + _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' + case $host in + osf3*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + ;; + *) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + ;; + esac + + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' + + else + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + ;; + + psos*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + + sunos4*) + case $cc_basename in + CC*) + # Sun C++ 4.x + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + lcc*) + # Lucid + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + *) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + + solaris*) + case $cc_basename in + CC* | sunCC*) + # Sun C++ 4.2, 5.x and Centerline C++ + _LT_TAGVAR(archive_cmds_need_lc,$1)=yes + _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs' + _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' + + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + case $host_os in + solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; + *) + # The compiler driver will combine and reorder linker options, + # but understands `-z linker_flag'. + # Supported since Solaris 2.6 (maybe 2.5.1?) + _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' + ;; + esac + _LT_TAGVAR(link_all_deplibs, $1)=yes + + output_verbose_link_cmd='func_echo_all' + + # Archives containing C++ object files must be created using + # "CC -xar", where "CC" is the Sun C++ compiler. This is + # necessary to make sure instantiated templates are included + # in the archive. + _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' + ;; + gcx*) + # Green Hills C++ Compiler + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' + + # The C++ compiler must be used to create the archive. + _LT_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs' + ;; + *) + # GNU C++ compiler with Solaris linker + if test "$GXX" = yes && test "$with_gnu_ld" = no; then + _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs' + if $CC --version | $GREP -v '^2\.7' > /dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -shared $pic_flag -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' + else + # g++ 2.7 appears to require `-G' NOT `-shared' on this + # platform. + _LT_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' + fi + + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir' + case $host_os in + solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; + *) + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' + ;; + esac + fi + ;; + esac + ;; + + sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*) + _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' + _LT_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + runpath_var='LD_RUN_PATH' + + case $cc_basename in + CC*) + _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + ;; + + sysv5* | sco3.2v5* | sco5v6*) + # Note: We can NOT use -z defs as we might desire, because we do not + # link with -lc, and that would cause any symbols used from libc to + # always be unresolved, which means just about no library would + # ever link correctly. If we're not using GNU ld we use -z text + # though, which does catch some bad symbols but isn't as heavy-handed + # as -z defs. + _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' + _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs' + _LT_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=':' + _LT_TAGVAR(link_all_deplibs, $1)=yes + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' + runpath_var='LD_RUN_PATH' + + case $cc_basename in + CC*) + _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(old_archive_cmds, $1)='$CC -Tprelink_objects $oldobjs~ + '"$_LT_TAGVAR(old_archive_cmds, $1)" + _LT_TAGVAR(reload_cmds, $1)='$CC -Tprelink_objects $reload_objs~ + '"$_LT_TAGVAR(reload_cmds, $1)" + ;; + *) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + ;; + + tandem*) + case $cc_basename in + NCC*) + # NonStop-UX NCC 3.20 + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + *) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + + vxworks*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + + *) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + esac + + AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)]) + test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no + + _LT_TAGVAR(GCC, $1)="$GXX" + _LT_TAGVAR(LD, $1)="$LD" + + ## CAVEAT EMPTOR: + ## There is no encapsulation within the following macros, do not change + ## the running order or otherwise move them around unless you know exactly + ## what you are doing... + _LT_SYS_HIDDEN_LIBDEPS($1) + _LT_COMPILER_PIC($1) + _LT_COMPILER_C_O($1) + _LT_COMPILER_FILE_LOCKS($1) + _LT_LINKER_SHLIBS($1) + _LT_SYS_DYNAMIC_LINKER($1) + _LT_LINKER_HARDCODE_LIBPATH($1) + + _LT_CONFIG($1) + fi # test -n "$compiler" + + CC=$lt_save_CC + CFLAGS=$lt_save_CFLAGS + LDCXX=$LD + LD=$lt_save_LD + GCC=$lt_save_GCC + with_gnu_ld=$lt_save_with_gnu_ld + lt_cv_path_LDCXX=$lt_cv_path_LD + lt_cv_path_LD=$lt_save_path_LD + lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld + lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld +fi # test "$_lt_caught_CXX_error" != yes + +AC_LANG_POP +])# _LT_LANG_CXX_CONFIG + + +# _LT_FUNC_STRIPNAME_CNF +# ---------------------- +# func_stripname_cnf prefix suffix name +# strip PREFIX and SUFFIX off of NAME. +# PREFIX and SUFFIX must not contain globbing or regex special +# characters, hashes, percent signs, but SUFFIX may contain a leading +# dot (in which case that matches only a dot). +# +# This function is identical to the (non-XSI) version of func_stripname, +# except this one can be used by m4 code that may be executed by configure, +# rather than the libtool script. +m4_defun([_LT_FUNC_STRIPNAME_CNF],[dnl +AC_REQUIRE([_LT_DECL_SED]) +AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH]) +func_stripname_cnf () +{ + case ${2} in + .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;; + *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;; + esac +} # func_stripname_cnf +])# _LT_FUNC_STRIPNAME_CNF + +# _LT_SYS_HIDDEN_LIBDEPS([TAGNAME]) +# --------------------------------- +# Figure out "hidden" library dependencies from verbose +# compiler output when linking a shared library. +# Parse the compiler output and extract the necessary +# objects, libraries and library flags. +m4_defun([_LT_SYS_HIDDEN_LIBDEPS], +[m4_require([_LT_FILEUTILS_DEFAULTS])dnl +AC_REQUIRE([_LT_FUNC_STRIPNAME_CNF])dnl +# Dependencies to place before and after the object being linked: +_LT_TAGVAR(predep_objects, $1)= +_LT_TAGVAR(postdep_objects, $1)= +_LT_TAGVAR(predeps, $1)= +_LT_TAGVAR(postdeps, $1)= +_LT_TAGVAR(compiler_lib_search_path, $1)= + +dnl we can't use the lt_simple_compile_test_code here, +dnl because it contains code intended for an executable, +dnl not a library. It's possible we should let each +dnl tag define a new lt_????_link_test_code variable, +dnl but it's only used here... +m4_if([$1], [], [cat > conftest.$ac_ext <<_LT_EOF +int a; +void foo (void) { a = 0; } +_LT_EOF +], [$1], [CXX], [cat > conftest.$ac_ext <<_LT_EOF +class Foo +{ +public: + Foo (void) { a = 0; } +private: + int a; +}; +_LT_EOF +], [$1], [F77], [cat > conftest.$ac_ext <<_LT_EOF + subroutine foo + implicit none + integer*4 a + a=0 + return + end +_LT_EOF +], [$1], [FC], [cat > conftest.$ac_ext <<_LT_EOF + subroutine foo + implicit none + integer a + a=0 + return + end +_LT_EOF +], [$1], [GCJ], [cat > conftest.$ac_ext <<_LT_EOF +public class foo { + private int a; + public void bar (void) { + a = 0; + } +}; +_LT_EOF +]) + +_lt_libdeps_save_CFLAGS=$CFLAGS +case "$CC $CFLAGS " in #( +*\ -flto*\ *) CFLAGS="$CFLAGS -fno-lto" ;; +*\ -fwhopr*\ *) CFLAGS="$CFLAGS -fno-whopr" ;; +esac + +dnl Parse the compiler output and extract the necessary +dnl objects, libraries and library flags. +if AC_TRY_EVAL(ac_compile); then + # Parse the compiler output and extract the necessary + # objects, libraries and library flags. + + # Sentinel used to keep track of whether or not we are before + # the conftest object file. + pre_test_object_deps_done=no + + for p in `eval "$output_verbose_link_cmd"`; do + case ${prev}${p} in + + -L* | -R* | -l*) + # Some compilers place space between "-{L,R}" and the path. + # Remove the space. + if test $p = "-L" || + test $p = "-R"; then + prev=$p + continue + fi + + # Expand the sysroot to ease extracting the directories later. + if test -z "$prev"; then + case $p in + -L*) func_stripname_cnf '-L' '' "$p"; prev=-L; p=$func_stripname_result ;; + -R*) func_stripname_cnf '-R' '' "$p"; prev=-R; p=$func_stripname_result ;; + -l*) func_stripname_cnf '-l' '' "$p"; prev=-l; p=$func_stripname_result ;; + esac + fi + case $p in + =*) func_stripname_cnf '=' '' "$p"; p=$lt_sysroot$func_stripname_result ;; + esac + if test "$pre_test_object_deps_done" = no; then + case ${prev} in + -L | -R) + # Internal compiler library paths should come after those + # provided the user. The postdeps already come after the + # user supplied libs so there is no need to process them. + if test -z "$_LT_TAGVAR(compiler_lib_search_path, $1)"; then + _LT_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}" + else + _LT_TAGVAR(compiler_lib_search_path, $1)="${_LT_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}" + fi + ;; + # The "-l" case would never come before the object being + # linked, so don't bother handling this case. + esac + else + if test -z "$_LT_TAGVAR(postdeps, $1)"; then + _LT_TAGVAR(postdeps, $1)="${prev}${p}" + else + _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} ${prev}${p}" + fi + fi + prev= + ;; + + *.lto.$objext) ;; # Ignore GCC LTO objects + *.$objext) + # This assumes that the test object file only shows up + # once in the compiler output. + if test "$p" = "conftest.$objext"; then + pre_test_object_deps_done=yes + continue + fi + + if test "$pre_test_object_deps_done" = no; then + if test -z "$_LT_TAGVAR(predep_objects, $1)"; then + _LT_TAGVAR(predep_objects, $1)="$p" + else + _LT_TAGVAR(predep_objects, $1)="$_LT_TAGVAR(predep_objects, $1) $p" + fi + else + if test -z "$_LT_TAGVAR(postdep_objects, $1)"; then + _LT_TAGVAR(postdep_objects, $1)="$p" + else + _LT_TAGVAR(postdep_objects, $1)="$_LT_TAGVAR(postdep_objects, $1) $p" + fi + fi + ;; + + *) ;; # Ignore the rest. + + esac + done + + # Clean up. + rm -f a.out a.exe +else + echo "libtool.m4: error: problem compiling $1 test program" +fi + +$RM -f confest.$objext +CFLAGS=$_lt_libdeps_save_CFLAGS + +# PORTME: override above test on systems where it is broken +m4_if([$1], [CXX], +[case $host_os in +interix[[3-9]]*) + # Interix 3.5 installs completely hosed .la files for C++, so rather than + # hack all around it, let's just trust "g++" to DTRT. + _LT_TAGVAR(predep_objects,$1)= + _LT_TAGVAR(postdep_objects,$1)= + _LT_TAGVAR(postdeps,$1)= + ;; + +linux*) + case `$CC -V 2>&1 | sed 5q` in + *Sun\ C*) + # Sun C++ 5.9 + + # The more standards-conforming stlport4 library is + # incompatible with the Cstd library. Avoid specifying + # it if it's in CXXFLAGS. Ignore libCrun as + # -library=stlport4 depends on it. + case " $CXX $CXXFLAGS " in + *" -library=stlport4 "*) + solaris_use_stlport4=yes + ;; + esac + + if test "$solaris_use_stlport4" != yes; then + _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun' + fi + ;; + esac + ;; + +solaris*) + case $cc_basename in + CC* | sunCC*) + # The more standards-conforming stlport4 library is + # incompatible with the Cstd library. Avoid specifying + # it if it's in CXXFLAGS. Ignore libCrun as + # -library=stlport4 depends on it. + case " $CXX $CXXFLAGS " in + *" -library=stlport4 "*) + solaris_use_stlport4=yes + ;; + esac + + # Adding this requires a known-good setup of shared libraries for + # Sun compiler versions before 5.6, else PIC objects from an old + # archive will be linked into the output, leading to subtle bugs. + if test "$solaris_use_stlport4" != yes; then + _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun' + fi + ;; + esac + ;; +esac +]) + +case " $_LT_TAGVAR(postdeps, $1) " in +*" -lc "*) _LT_TAGVAR(archive_cmds_need_lc, $1)=no ;; +esac + _LT_TAGVAR(compiler_lib_search_dirs, $1)= +if test -n "${_LT_TAGVAR(compiler_lib_search_path, $1)}"; then + _LT_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_TAGVAR(compiler_lib_search_path, $1)}" | ${SED} -e 's! -L! !g' -e 's!^ !!'` +fi +_LT_TAGDECL([], [compiler_lib_search_dirs], [1], + [The directories searched by this compiler when creating a shared library]) +_LT_TAGDECL([], [predep_objects], [1], + [Dependencies to place before and after the objects being linked to + create a shared library]) +_LT_TAGDECL([], [postdep_objects], [1]) +_LT_TAGDECL([], [predeps], [1]) +_LT_TAGDECL([], [postdeps], [1]) +_LT_TAGDECL([], [compiler_lib_search_path], [1], + [The library search path used internally by the compiler when linking + a shared library]) +])# _LT_SYS_HIDDEN_LIBDEPS + + +# _LT_LANG_F77_CONFIG([TAG]) +# -------------------------- +# Ensure that the configuration variables for a Fortran 77 compiler are +# suitably defined. These variables are subsequently used by _LT_CONFIG +# to write the compiler configuration to `libtool'. +m4_defun([_LT_LANG_F77_CONFIG], +[AC_LANG_PUSH(Fortran 77) +if test -z "$F77" || test "X$F77" = "Xno"; then + _lt_disable_F77=yes +fi + +_LT_TAGVAR(archive_cmds_need_lc, $1)=no +_LT_TAGVAR(allow_undefined_flag, $1)= +_LT_TAGVAR(always_export_symbols, $1)=no +_LT_TAGVAR(archive_expsym_cmds, $1)= +_LT_TAGVAR(export_dynamic_flag_spec, $1)= +_LT_TAGVAR(hardcode_direct, $1)=no +_LT_TAGVAR(hardcode_direct_absolute, $1)=no +_LT_TAGVAR(hardcode_libdir_flag_spec, $1)= +_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= +_LT_TAGVAR(hardcode_libdir_separator, $1)= +_LT_TAGVAR(hardcode_minus_L, $1)=no +_LT_TAGVAR(hardcode_automatic, $1)=no +_LT_TAGVAR(inherit_rpath, $1)=no +_LT_TAGVAR(module_cmds, $1)= +_LT_TAGVAR(module_expsym_cmds, $1)= +_LT_TAGVAR(link_all_deplibs, $1)=unknown +_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds +_LT_TAGVAR(reload_flag, $1)=$reload_flag +_LT_TAGVAR(reload_cmds, $1)=$reload_cmds +_LT_TAGVAR(no_undefined_flag, $1)= +_LT_TAGVAR(whole_archive_flag_spec, $1)= +_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no + +# Source file extension for f77 test sources. +ac_ext=f + +# Object file extension for compiled f77 test sources. +objext=o +_LT_TAGVAR(objext, $1)=$objext + +# No sense in running all these tests if we already determined that +# the F77 compiler isn't working. Some variables (like enable_shared) +# are currently assumed to apply to all compilers on this platform, +# and will be corrupted by setting them based on a non-working compiler. +if test "$_lt_disable_F77" != yes; then + # Code to be used in simple compile tests + lt_simple_compile_test_code="\ + subroutine t + return + end +" + + # Code to be used in simple link tests + lt_simple_link_test_code="\ + program t + end +" + + # ltmain only uses $CC for tagged configurations so make sure $CC is set. + _LT_TAG_COMPILER + + # save warnings/boilerplate of simple test code + _LT_COMPILER_BOILERPLATE + _LT_LINKER_BOILERPLATE + + # Allow CC to be a program name with arguments. + lt_save_CC="$CC" + lt_save_GCC=$GCC + lt_save_CFLAGS=$CFLAGS + CC=${F77-"f77"} + CFLAGS=$FFLAGS + compiler=$CC + _LT_TAGVAR(compiler, $1)=$CC + _LT_CC_BASENAME([$compiler]) + GCC=$G77 + if test -n "$compiler"; then + AC_MSG_CHECKING([if libtool supports shared libraries]) + AC_MSG_RESULT([$can_build_shared]) + + AC_MSG_CHECKING([whether to build shared libraries]) + test "$can_build_shared" = "no" && enable_shared=no + + # On AIX, shared libraries and static libraries use the same namespace, and + # are all built from PIC. + case $host_os in + aix3*) + test "$enable_shared" = yes && enable_static=no + if test -n "$RANLIB"; then + archive_cmds="$archive_cmds~\$RANLIB \$lib" + postinstall_cmds='$RANLIB $lib' + fi + ;; + aix[[4-9]]*) + if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then + test "$enable_shared" = yes && enable_static=no + fi + ;; + esac + AC_MSG_RESULT([$enable_shared]) + + AC_MSG_CHECKING([whether to build static libraries]) + # Make sure either enable_shared or enable_static is yes. + test "$enable_shared" = yes || enable_static=yes + AC_MSG_RESULT([$enable_static]) + + _LT_TAGVAR(GCC, $1)="$G77" + _LT_TAGVAR(LD, $1)="$LD" + + ## CAVEAT EMPTOR: + ## There is no encapsulation within the following macros, do not change + ## the running order or otherwise move them around unless you know exactly + ## what you are doing... + _LT_COMPILER_PIC($1) + _LT_COMPILER_C_O($1) + _LT_COMPILER_FILE_LOCKS($1) + _LT_LINKER_SHLIBS($1) + _LT_SYS_DYNAMIC_LINKER($1) + _LT_LINKER_HARDCODE_LIBPATH($1) + + _LT_CONFIG($1) + fi # test -n "$compiler" + + GCC=$lt_save_GCC + CC="$lt_save_CC" + CFLAGS="$lt_save_CFLAGS" +fi # test "$_lt_disable_F77" != yes + +AC_LANG_POP +])# _LT_LANG_F77_CONFIG + + +# _LT_LANG_FC_CONFIG([TAG]) +# ------------------------- +# Ensure that the configuration variables for a Fortran compiler are +# suitably defined. These variables are subsequently used by _LT_CONFIG +# to write the compiler configuration to `libtool'. +m4_defun([_LT_LANG_FC_CONFIG], +[AC_LANG_PUSH(Fortran) + +if test -z "$FC" || test "X$FC" = "Xno"; then + _lt_disable_FC=yes +fi + +_LT_TAGVAR(archive_cmds_need_lc, $1)=no +_LT_TAGVAR(allow_undefined_flag, $1)= +_LT_TAGVAR(always_export_symbols, $1)=no +_LT_TAGVAR(archive_expsym_cmds, $1)= +_LT_TAGVAR(export_dynamic_flag_spec, $1)= +_LT_TAGVAR(hardcode_direct, $1)=no +_LT_TAGVAR(hardcode_direct_absolute, $1)=no +_LT_TAGVAR(hardcode_libdir_flag_spec, $1)= +_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= +_LT_TAGVAR(hardcode_libdir_separator, $1)= +_LT_TAGVAR(hardcode_minus_L, $1)=no +_LT_TAGVAR(hardcode_automatic, $1)=no +_LT_TAGVAR(inherit_rpath, $1)=no +_LT_TAGVAR(module_cmds, $1)= +_LT_TAGVAR(module_expsym_cmds, $1)= +_LT_TAGVAR(link_all_deplibs, $1)=unknown +_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds +_LT_TAGVAR(reload_flag, $1)=$reload_flag +_LT_TAGVAR(reload_cmds, $1)=$reload_cmds +_LT_TAGVAR(no_undefined_flag, $1)= +_LT_TAGVAR(whole_archive_flag_spec, $1)= +_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no + +# Source file extension for fc test sources. +ac_ext=${ac_fc_srcext-f} + +# Object file extension for compiled fc test sources. +objext=o +_LT_TAGVAR(objext, $1)=$objext + +# No sense in running all these tests if we already determined that +# the FC compiler isn't working. Some variables (like enable_shared) +# are currently assumed to apply to all compilers on this platform, +# and will be corrupted by setting them based on a non-working compiler. +if test "$_lt_disable_FC" != yes; then + # Code to be used in simple compile tests + lt_simple_compile_test_code="\ + subroutine t + return + end +" + + # Code to be used in simple link tests + lt_simple_link_test_code="\ + program t + end +" + + # ltmain only uses $CC for tagged configurations so make sure $CC is set. + _LT_TAG_COMPILER + + # save warnings/boilerplate of simple test code + _LT_COMPILER_BOILERPLATE + _LT_LINKER_BOILERPLATE + + # Allow CC to be a program name with arguments. + lt_save_CC="$CC" + lt_save_GCC=$GCC + lt_save_CFLAGS=$CFLAGS + CC=${FC-"f95"} + CFLAGS=$FCFLAGS + compiler=$CC + GCC=$ac_cv_fc_compiler_gnu + + _LT_TAGVAR(compiler, $1)=$CC + _LT_CC_BASENAME([$compiler]) + + if test -n "$compiler"; then + AC_MSG_CHECKING([if libtool supports shared libraries]) + AC_MSG_RESULT([$can_build_shared]) + + AC_MSG_CHECKING([whether to build shared libraries]) + test "$can_build_shared" = "no" && enable_shared=no + + # On AIX, shared libraries and static libraries use the same namespace, and + # are all built from PIC. + case $host_os in + aix3*) + test "$enable_shared" = yes && enable_static=no + if test -n "$RANLIB"; then + archive_cmds="$archive_cmds~\$RANLIB \$lib" + postinstall_cmds='$RANLIB $lib' + fi + ;; + aix[[4-9]]*) + if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then + test "$enable_shared" = yes && enable_static=no + fi + ;; + esac + AC_MSG_RESULT([$enable_shared]) + + AC_MSG_CHECKING([whether to build static libraries]) + # Make sure either enable_shared or enable_static is yes. + test "$enable_shared" = yes || enable_static=yes + AC_MSG_RESULT([$enable_static]) + + _LT_TAGVAR(GCC, $1)="$ac_cv_fc_compiler_gnu" + _LT_TAGVAR(LD, $1)="$LD" + + ## CAVEAT EMPTOR: + ## There is no encapsulation within the following macros, do not change + ## the running order or otherwise move them around unless you know exactly + ## what you are doing... + _LT_SYS_HIDDEN_LIBDEPS($1) + _LT_COMPILER_PIC($1) + _LT_COMPILER_C_O($1) + _LT_COMPILER_FILE_LOCKS($1) + _LT_LINKER_SHLIBS($1) + _LT_SYS_DYNAMIC_LINKER($1) + _LT_LINKER_HARDCODE_LIBPATH($1) + + _LT_CONFIG($1) + fi # test -n "$compiler" + + GCC=$lt_save_GCC + CC=$lt_save_CC + CFLAGS=$lt_save_CFLAGS +fi # test "$_lt_disable_FC" != yes + +AC_LANG_POP +])# _LT_LANG_FC_CONFIG + + +# _LT_LANG_GCJ_CONFIG([TAG]) +# -------------------------- +# Ensure that the configuration variables for the GNU Java Compiler compiler +# are suitably defined. These variables are subsequently used by _LT_CONFIG +# to write the compiler configuration to `libtool'. +m4_defun([_LT_LANG_GCJ_CONFIG], +[AC_REQUIRE([LT_PROG_GCJ])dnl +AC_LANG_SAVE + +# Source file extension for Java test sources. +ac_ext=java + +# Object file extension for compiled Java test sources. +objext=o +_LT_TAGVAR(objext, $1)=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code="class foo {}" + +# Code to be used in simple link tests +lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }' + +# ltmain only uses $CC for tagged configurations so make sure $CC is set. +_LT_TAG_COMPILER + +# save warnings/boilerplate of simple test code +_LT_COMPILER_BOILERPLATE +_LT_LINKER_BOILERPLATE + +# Allow CC to be a program name with arguments. +lt_save_CC=$CC +lt_save_CFLAGS=$CFLAGS +lt_save_GCC=$GCC +GCC=yes +CC=${GCJ-"gcj"} +CFLAGS=$GCJFLAGS +compiler=$CC +_LT_TAGVAR(compiler, $1)=$CC +_LT_TAGVAR(LD, $1)="$LD" +_LT_CC_BASENAME([$compiler]) + +# GCJ did not exist at the time GCC didn't implicitly link libc in. +_LT_TAGVAR(archive_cmds_need_lc, $1)=no + +_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds +_LT_TAGVAR(reload_flag, $1)=$reload_flag +_LT_TAGVAR(reload_cmds, $1)=$reload_cmds + +if test -n "$compiler"; then + _LT_COMPILER_NO_RTTI($1) + _LT_COMPILER_PIC($1) + _LT_COMPILER_C_O($1) + _LT_COMPILER_FILE_LOCKS($1) + _LT_LINKER_SHLIBS($1) + _LT_LINKER_HARDCODE_LIBPATH($1) + + _LT_CONFIG($1) +fi + +AC_LANG_RESTORE + +GCC=$lt_save_GCC +CC=$lt_save_CC +CFLAGS=$lt_save_CFLAGS +])# _LT_LANG_GCJ_CONFIG + + +# _LT_LANG_RC_CONFIG([TAG]) +# ------------------------- +# Ensure that the configuration variables for the Windows resource compiler +# are suitably defined. These variables are subsequently used by _LT_CONFIG +# to write the compiler configuration to `libtool'. +m4_defun([_LT_LANG_RC_CONFIG], +[AC_REQUIRE([LT_PROG_RC])dnl +AC_LANG_SAVE + +# Source file extension for RC test sources. +ac_ext=rc + +# Object file extension for compiled RC test sources. +objext=o +_LT_TAGVAR(objext, $1)=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }' + +# Code to be used in simple link tests +lt_simple_link_test_code="$lt_simple_compile_test_code" + +# ltmain only uses $CC for tagged configurations so make sure $CC is set. +_LT_TAG_COMPILER + +# save warnings/boilerplate of simple test code +_LT_COMPILER_BOILERPLATE +_LT_LINKER_BOILERPLATE + +# Allow CC to be a program name with arguments. +lt_save_CC="$CC" +lt_save_CFLAGS=$CFLAGS +lt_save_GCC=$GCC +GCC= +CC=${RC-"windres"} +CFLAGS= +compiler=$CC +_LT_TAGVAR(compiler, $1)=$CC +_LT_CC_BASENAME([$compiler]) +_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes + +if test -n "$compiler"; then + : + _LT_CONFIG($1) +fi + +GCC=$lt_save_GCC +AC_LANG_RESTORE +CC=$lt_save_CC +CFLAGS=$lt_save_CFLAGS +])# _LT_LANG_RC_CONFIG + + +# LT_PROG_GCJ +# ----------- +AC_DEFUN([LT_PROG_GCJ], +[m4_ifdef([AC_PROG_GCJ], [AC_PROG_GCJ], + [m4_ifdef([A][M_PROG_GCJ], [A][M_PROG_GCJ], + [AC_CHECK_TOOL(GCJ, gcj,) + test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2" + AC_SUBST(GCJFLAGS)])])[]dnl +]) + +# Old name: +AU_ALIAS([LT_AC_PROG_GCJ], [LT_PROG_GCJ]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([LT_AC_PROG_GCJ], []) + + +# LT_PROG_RC +# ---------- +AC_DEFUN([LT_PROG_RC], +[AC_CHECK_TOOL(RC, windres,) +]) + +# Old name: +AU_ALIAS([LT_AC_PROG_RC], [LT_PROG_RC]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([LT_AC_PROG_RC], []) + + +# _LT_DECL_EGREP +# -------------- +# If we don't have a new enough Autoconf to choose the best grep +# available, choose the one first in the user's PATH. +m4_defun([_LT_DECL_EGREP], +[AC_REQUIRE([AC_PROG_EGREP])dnl +AC_REQUIRE([AC_PROG_FGREP])dnl +test -z "$GREP" && GREP=grep +_LT_DECL([], [GREP], [1], [A grep program that handles long lines]) +_LT_DECL([], [EGREP], [1], [An ERE matcher]) +_LT_DECL([], [FGREP], [1], [A literal string matcher]) +dnl Non-bleeding-edge autoconf doesn't subst GREP, so do it here too +AC_SUBST([GREP]) +]) + + +# _LT_DECL_OBJDUMP +# -------------- +# If we don't have a new enough Autoconf to choose the best objdump +# available, choose the one first in the user's PATH. +m4_defun([_LT_DECL_OBJDUMP], +[AC_CHECK_TOOL(OBJDUMP, objdump, false) +test -z "$OBJDUMP" && OBJDUMP=objdump +_LT_DECL([], [OBJDUMP], [1], [An object symbol dumper]) +AC_SUBST([OBJDUMP]) +]) + +# _LT_DECL_DLLTOOL +# ---------------- +# Ensure DLLTOOL variable is set. +m4_defun([_LT_DECL_DLLTOOL], +[AC_CHECK_TOOL(DLLTOOL, dlltool, false) +test -z "$DLLTOOL" && DLLTOOL=dlltool +_LT_DECL([], [DLLTOOL], [1], [DLL creation program]) +AC_SUBST([DLLTOOL]) +]) + +# _LT_DECL_SED +# ------------ +# Check for a fully-functional sed program, that truncates +# as few characters as possible. Prefer GNU sed if found. +m4_defun([_LT_DECL_SED], +[AC_PROG_SED +test -z "$SED" && SED=sed +Xsed="$SED -e 1s/^X//" +_LT_DECL([], [SED], [1], [A sed program that does not truncate output]) +_LT_DECL([], [Xsed], ["\$SED -e 1s/^X//"], + [Sed that helps us avoid accidentally triggering echo(1) options like -n]) +])# _LT_DECL_SED + +m4_ifndef([AC_PROG_SED], [ +# NOTE: This macro has been submitted for inclusion into # +# GNU Autoconf as AC_PROG_SED. When it is available in # +# a released version of Autoconf we should remove this # +# macro and use it instead. # + +m4_defun([AC_PROG_SED], +[AC_MSG_CHECKING([for a sed that does not truncate output]) +AC_CACHE_VAL(lt_cv_path_SED, +[# Loop through the user's path and test for sed and gsed. +# Then use that list of sed's as ones to test for truncation. +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for lt_ac_prog in sed gsed; do + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then + lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext" + fi + done + done +done +IFS=$as_save_IFS +lt_ac_max=0 +lt_ac_count=0 +# Add /usr/xpg4/bin/sed as it is typically found on Solaris +# along with /bin/sed that truncates output. +for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do + test ! -f $lt_ac_sed && continue + cat /dev/null > conftest.in + lt_ac_count=0 + echo $ECHO_N "0123456789$ECHO_C" >conftest.in + # Check for GNU sed and select it if it is found. + if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then + lt_cv_path_SED=$lt_ac_sed + break + fi + while true; do + cat conftest.in conftest.in >conftest.tmp + mv conftest.tmp conftest.in + cp conftest.in conftest.nl + echo >>conftest.nl + $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break + cmp -s conftest.out conftest.nl || break + # 10000 chars as input seems more than enough + test $lt_ac_count -gt 10 && break + lt_ac_count=`expr $lt_ac_count + 1` + if test $lt_ac_count -gt $lt_ac_max; then + lt_ac_max=$lt_ac_count + lt_cv_path_SED=$lt_ac_sed + fi + done +done +]) +SED=$lt_cv_path_SED +AC_SUBST([SED]) +AC_MSG_RESULT([$SED]) +])#AC_PROG_SED +])#m4_ifndef + +# Old name: +AU_ALIAS([LT_AC_PROG_SED], [AC_PROG_SED]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([LT_AC_PROG_SED], []) + + +# _LT_CHECK_SHELL_FEATURES +# ------------------------ +# Find out whether the shell is Bourne or XSI compatible, +# or has some other useful features. +m4_defun([_LT_CHECK_SHELL_FEATURES], +[AC_MSG_CHECKING([whether the shell understands some XSI constructs]) +# Try some XSI features +xsi_shell=no +( _lt_dummy="a/b/c" + test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \ + = c,a/b,b/c, \ + && eval 'test $(( 1 + 1 )) -eq 2 \ + && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \ + && xsi_shell=yes +AC_MSG_RESULT([$xsi_shell]) +_LT_CONFIG_LIBTOOL_INIT([xsi_shell='$xsi_shell']) + +AC_MSG_CHECKING([whether the shell understands "+="]) +lt_shell_append=no +( foo=bar; set foo baz; eval "$[1]+=\$[2]" && test "$foo" = barbaz ) \ + >/dev/null 2>&1 \ + && lt_shell_append=yes +AC_MSG_RESULT([$lt_shell_append]) +_LT_CONFIG_LIBTOOL_INIT([lt_shell_append='$lt_shell_append']) + +if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then + lt_unset=unset +else + lt_unset=false +fi +_LT_DECL([], [lt_unset], [0], [whether the shell understands "unset"])dnl + +# test EBCDIC or ASCII +case `echo X|tr X '\101'` in + A) # ASCII based system + # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr + lt_SP2NL='tr \040 \012' + lt_NL2SP='tr \015\012 \040\040' + ;; + *) # EBCDIC based system + lt_SP2NL='tr \100 \n' + lt_NL2SP='tr \r\n \100\100' + ;; +esac +_LT_DECL([SP2NL], [lt_SP2NL], [1], [turn spaces into newlines])dnl +_LT_DECL([NL2SP], [lt_NL2SP], [1], [turn newlines into spaces])dnl +])# _LT_CHECK_SHELL_FEATURES + + +# _LT_PROG_FUNCTION_REPLACE (FUNCNAME, REPLACEMENT-BODY) +# ------------------------------------------------------ +# In `$cfgfile', look for function FUNCNAME delimited by `^FUNCNAME ()$' and +# '^} FUNCNAME ', and replace its body with REPLACEMENT-BODY. +m4_defun([_LT_PROG_FUNCTION_REPLACE], +[dnl { +sed -e '/^$1 ()$/,/^} # $1 /c\ +$1 ()\ +{\ +m4_bpatsubsts([$2], [$], [\\], [^\([ ]\)], [\\\1]) +} # Extended-shell $1 implementation' "$cfgfile" > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") +test 0 -eq $? || _lt_function_replace_fail=: +]) + + +# _LT_PROG_REPLACE_SHELLFNS +# ------------------------- +# Replace existing portable implementations of several shell functions with +# equivalent extended shell implementations where those features are available.. +m4_defun([_LT_PROG_REPLACE_SHELLFNS], +[if test x"$xsi_shell" = xyes; then + _LT_PROG_FUNCTION_REPLACE([func_dirname], [dnl + case ${1} in + */*) func_dirname_result="${1%/*}${2}" ;; + * ) func_dirname_result="${3}" ;; + esac]) + + _LT_PROG_FUNCTION_REPLACE([func_basename], [dnl + func_basename_result="${1##*/}"]) + + _LT_PROG_FUNCTION_REPLACE([func_dirname_and_basename], [dnl + case ${1} in + */*) func_dirname_result="${1%/*}${2}" ;; + * ) func_dirname_result="${3}" ;; + esac + func_basename_result="${1##*/}"]) + + _LT_PROG_FUNCTION_REPLACE([func_stripname], [dnl + # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are + # positional parameters, so assign one to ordinary parameter first. + func_stripname_result=${3} + func_stripname_result=${func_stripname_result#"${1}"} + func_stripname_result=${func_stripname_result%"${2}"}]) + + _LT_PROG_FUNCTION_REPLACE([func_split_long_opt], [dnl + func_split_long_opt_name=${1%%=*} + func_split_long_opt_arg=${1#*=}]) + + _LT_PROG_FUNCTION_REPLACE([func_split_short_opt], [dnl + func_split_short_opt_arg=${1#??} + func_split_short_opt_name=${1%"$func_split_short_opt_arg"}]) + + _LT_PROG_FUNCTION_REPLACE([func_lo2o], [dnl + case ${1} in + *.lo) func_lo2o_result=${1%.lo}.${objext} ;; + *) func_lo2o_result=${1} ;; + esac]) + + _LT_PROG_FUNCTION_REPLACE([func_xform], [ func_xform_result=${1%.*}.lo]) + + _LT_PROG_FUNCTION_REPLACE([func_arith], [ func_arith_result=$(( $[*] ))]) + + _LT_PROG_FUNCTION_REPLACE([func_len], [ func_len_result=${#1}]) +fi + +if test x"$lt_shell_append" = xyes; then + _LT_PROG_FUNCTION_REPLACE([func_append], [ eval "${1}+=\\${2}"]) + + _LT_PROG_FUNCTION_REPLACE([func_append_quoted], [dnl + func_quote_for_eval "${2}" +dnl m4 expansion turns \\\\ into \\, and then the shell eval turns that into \ + eval "${1}+=\\\\ \\$func_quote_for_eval_result"]) + + # Save a `func_append' function call where possible by direct use of '+=' + sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") + test 0 -eq $? || _lt_function_replace_fail=: +else + # Save a `func_append' function call even when '+=' is not available + sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") + test 0 -eq $? || _lt_function_replace_fail=: +fi + +if test x"$_lt_function_replace_fail" = x":"; then + AC_MSG_WARN([Unable to substitute extended shell functions in $ofile]) +fi +]) + +# _LT_PATH_CONVERSION_FUNCTIONS +# ----------------------------- +# Determine which file name conversion functions should be used by +# func_to_host_file (and, implicitly, by func_to_host_path). These are needed +# for certain cross-compile configurations and native mingw. +m4_defun([_LT_PATH_CONVERSION_FUNCTIONS], +[AC_REQUIRE([AC_CANONICAL_HOST])dnl +AC_REQUIRE([AC_CANONICAL_BUILD])dnl +AC_MSG_CHECKING([how to convert $build file names to $host format]) +AC_CACHE_VAL(lt_cv_to_host_file_cmd, +[case $host in + *-*-mingw* ) + case $build in + *-*-mingw* ) # actually msys + lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32 + ;; + *-*-cygwin* ) + lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32 + ;; + * ) # otherwise, assume *nix + lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32 + ;; + esac + ;; + *-*-cygwin* ) + case $build in + *-*-mingw* ) # actually msys + lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin + ;; + *-*-cygwin* ) + lt_cv_to_host_file_cmd=func_convert_file_noop + ;; + * ) # otherwise, assume *nix + lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin + ;; + esac + ;; + * ) # unhandled hosts (and "normal" native builds) + lt_cv_to_host_file_cmd=func_convert_file_noop + ;; +esac +]) +to_host_file_cmd=$lt_cv_to_host_file_cmd +AC_MSG_RESULT([$lt_cv_to_host_file_cmd]) +_LT_DECL([to_host_file_cmd], [lt_cv_to_host_file_cmd], + [0], [convert $build file names to $host format])dnl + +AC_MSG_CHECKING([how to convert $build file names to toolchain format]) +AC_CACHE_VAL(lt_cv_to_tool_file_cmd, +[#assume ordinary cross tools, or native build. +lt_cv_to_tool_file_cmd=func_convert_file_noop +case $host in + *-*-mingw* ) + case $build in + *-*-mingw* ) # actually msys + lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32 + ;; + esac + ;; +esac +]) +to_tool_file_cmd=$lt_cv_to_tool_file_cmd +AC_MSG_RESULT([$lt_cv_to_tool_file_cmd]) +_LT_DECL([to_tool_file_cmd], [lt_cv_to_tool_file_cmd], + [0], [convert $build files to toolchain format])dnl +])# _LT_PATH_CONVERSION_FUNCTIONS + +# Helper functions for option handling. -*- Autoconf -*- +# +# Copyright (C) 2004, 2005, 2007, 2008, 2009 Free Software Foundation, +# Inc. +# Written by Gary V. Vaughan, 2004 +# +# This file is free software; the Free Software Foundation gives +# unlimited permission to copy and/or distribute it, with or without +# modifications, as long as this notice is preserved. + +# serial 7 ltoptions.m4 + +# This is to help aclocal find these macros, as it can't see m4_define. +AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])]) + + +# _LT_MANGLE_OPTION(MACRO-NAME, OPTION-NAME) +# ------------------------------------------ +m4_define([_LT_MANGLE_OPTION], +[[_LT_OPTION_]m4_bpatsubst($1__$2, [[^a-zA-Z0-9_]], [_])]) + + +# _LT_SET_OPTION(MACRO-NAME, OPTION-NAME) +# --------------------------------------- +# Set option OPTION-NAME for macro MACRO-NAME, and if there is a +# matching handler defined, dispatch to it. Other OPTION-NAMEs are +# saved as a flag. +m4_define([_LT_SET_OPTION], +[m4_define(_LT_MANGLE_OPTION([$1], [$2]))dnl +m4_ifdef(_LT_MANGLE_DEFUN([$1], [$2]), + _LT_MANGLE_DEFUN([$1], [$2]), + [m4_warning([Unknown $1 option `$2'])])[]dnl +]) + + +# _LT_IF_OPTION(MACRO-NAME, OPTION-NAME, IF-SET, [IF-NOT-SET]) +# ------------------------------------------------------------ +# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. +m4_define([_LT_IF_OPTION], +[m4_ifdef(_LT_MANGLE_OPTION([$1], [$2]), [$3], [$4])]) + + +# _LT_UNLESS_OPTIONS(MACRO-NAME, OPTION-LIST, IF-NOT-SET) +# ------------------------------------------------------- +# Execute IF-NOT-SET unless all options in OPTION-LIST for MACRO-NAME +# are set. +m4_define([_LT_UNLESS_OPTIONS], +[m4_foreach([_LT_Option], m4_split(m4_normalize([$2])), + [m4_ifdef(_LT_MANGLE_OPTION([$1], _LT_Option), + [m4_define([$0_found])])])[]dnl +m4_ifdef([$0_found], [m4_undefine([$0_found])], [$3 +])[]dnl +]) + + +# _LT_SET_OPTIONS(MACRO-NAME, OPTION-LIST) +# ---------------------------------------- +# OPTION-LIST is a space-separated list of Libtool options associated +# with MACRO-NAME. If any OPTION has a matching handler declared with +# LT_OPTION_DEFINE, dispatch to that macro; otherwise complain about +# the unknown option and exit. +m4_defun([_LT_SET_OPTIONS], +[# Set options +m4_foreach([_LT_Option], m4_split(m4_normalize([$2])), + [_LT_SET_OPTION([$1], _LT_Option)]) + +m4_if([$1],[LT_INIT],[ + dnl + dnl Simply set some default values (i.e off) if boolean options were not + dnl specified: + _LT_UNLESS_OPTIONS([LT_INIT], [dlopen], [enable_dlopen=no + ]) + _LT_UNLESS_OPTIONS([LT_INIT], [win32-dll], [enable_win32_dll=no + ]) + dnl + dnl If no reference was made to various pairs of opposing options, then + dnl we run the default mode handler for the pair. For example, if neither + dnl `shared' nor `disable-shared' was passed, we enable building of shared + dnl archives by default: + _LT_UNLESS_OPTIONS([LT_INIT], [shared disable-shared], [_LT_ENABLE_SHARED]) + _LT_UNLESS_OPTIONS([LT_INIT], [static disable-static], [_LT_ENABLE_STATIC]) + _LT_UNLESS_OPTIONS([LT_INIT], [pic-only no-pic], [_LT_WITH_PIC]) + _LT_UNLESS_OPTIONS([LT_INIT], [fast-install disable-fast-install], + [_LT_ENABLE_FAST_INSTALL]) + ]) +])# _LT_SET_OPTIONS + + + +# _LT_MANGLE_DEFUN(MACRO-NAME, OPTION-NAME) +# ----------------------------------------- +m4_define([_LT_MANGLE_DEFUN], +[[_LT_OPTION_DEFUN_]m4_bpatsubst(m4_toupper([$1__$2]), [[^A-Z0-9_]], [_])]) + + +# LT_OPTION_DEFINE(MACRO-NAME, OPTION-NAME, CODE) +# ----------------------------------------------- +m4_define([LT_OPTION_DEFINE], +[m4_define(_LT_MANGLE_DEFUN([$1], [$2]), [$3])[]dnl +])# LT_OPTION_DEFINE + + +# dlopen +# ------ +LT_OPTION_DEFINE([LT_INIT], [dlopen], [enable_dlopen=yes +]) + +AU_DEFUN([AC_LIBTOOL_DLOPEN], +[_LT_SET_OPTION([LT_INIT], [dlopen]) +AC_DIAGNOSE([obsolete], +[$0: Remove this warning and the call to _LT_SET_OPTION when you +put the `dlopen' option into LT_INIT's first parameter.]) +]) + +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_DLOPEN], []) + + +# win32-dll +# --------- +# Declare package support for building win32 dll's. +LT_OPTION_DEFINE([LT_INIT], [win32-dll], +[enable_win32_dll=yes + +case $host in +*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-cegcc*) + AC_CHECK_TOOL(AS, as, false) + AC_CHECK_TOOL(DLLTOOL, dlltool, false) + AC_CHECK_TOOL(OBJDUMP, objdump, false) + ;; +esac + +test -z "$AS" && AS=as +_LT_DECL([], [AS], [1], [Assembler program])dnl + +test -z "$DLLTOOL" && DLLTOOL=dlltool +_LT_DECL([], [DLLTOOL], [1], [DLL creation program])dnl + +test -z "$OBJDUMP" && OBJDUMP=objdump +_LT_DECL([], [OBJDUMP], [1], [Object dumper program])dnl +])# win32-dll + +AU_DEFUN([AC_LIBTOOL_WIN32_DLL], +[AC_REQUIRE([AC_CANONICAL_HOST])dnl +_LT_SET_OPTION([LT_INIT], [win32-dll]) +AC_DIAGNOSE([obsolete], +[$0: Remove this warning and the call to _LT_SET_OPTION when you +put the `win32-dll' option into LT_INIT's first parameter.]) +]) + +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_WIN32_DLL], []) + + +# _LT_ENABLE_SHARED([DEFAULT]) +# ---------------------------- +# implement the --enable-shared flag, and supports the `shared' and +# `disable-shared' LT_INIT options. +# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. +m4_define([_LT_ENABLE_SHARED], +[m4_define([_LT_ENABLE_SHARED_DEFAULT], [m4_if($1, no, no, yes)])dnl +AC_ARG_ENABLE([shared], + [AS_HELP_STRING([--enable-shared@<:@=PKGS@:>@], + [build shared libraries @<:@default=]_LT_ENABLE_SHARED_DEFAULT[@:>@])], + [p=${PACKAGE-default} + case $enableval in + yes) enable_shared=yes ;; + no) enable_shared=no ;; + *) + enable_shared=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_shared=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac], + [enable_shared=]_LT_ENABLE_SHARED_DEFAULT) + + _LT_DECL([build_libtool_libs], [enable_shared], [0], + [Whether or not to build shared libraries]) +])# _LT_ENABLE_SHARED + +LT_OPTION_DEFINE([LT_INIT], [shared], [_LT_ENABLE_SHARED([yes])]) +LT_OPTION_DEFINE([LT_INIT], [disable-shared], [_LT_ENABLE_SHARED([no])]) + +# Old names: +AC_DEFUN([AC_ENABLE_SHARED], +[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[shared]) +]) + +AC_DEFUN([AC_DISABLE_SHARED], +[_LT_SET_OPTION([LT_INIT], [disable-shared]) +]) + +AU_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)]) +AU_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)]) + +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AM_ENABLE_SHARED], []) +dnl AC_DEFUN([AM_DISABLE_SHARED], []) + + + +# _LT_ENABLE_STATIC([DEFAULT]) +# ---------------------------- +# implement the --enable-static flag, and support the `static' and +# `disable-static' LT_INIT options. +# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. +m4_define([_LT_ENABLE_STATIC], +[m4_define([_LT_ENABLE_STATIC_DEFAULT], [m4_if($1, no, no, yes)])dnl +AC_ARG_ENABLE([static], + [AS_HELP_STRING([--enable-static@<:@=PKGS@:>@], + [build static libraries @<:@default=]_LT_ENABLE_STATIC_DEFAULT[@:>@])], + [p=${PACKAGE-default} + case $enableval in + yes) enable_static=yes ;; + no) enable_static=no ;; + *) + enable_static=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_static=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac], + [enable_static=]_LT_ENABLE_STATIC_DEFAULT) + + _LT_DECL([build_old_libs], [enable_static], [0], + [Whether or not to build static libraries]) +])# _LT_ENABLE_STATIC + +LT_OPTION_DEFINE([LT_INIT], [static], [_LT_ENABLE_STATIC([yes])]) +LT_OPTION_DEFINE([LT_INIT], [disable-static], [_LT_ENABLE_STATIC([no])]) + +# Old names: +AC_DEFUN([AC_ENABLE_STATIC], +[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[static]) +]) + +AC_DEFUN([AC_DISABLE_STATIC], +[_LT_SET_OPTION([LT_INIT], [disable-static]) +]) + +AU_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)]) +AU_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)]) + +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AM_ENABLE_STATIC], []) +dnl AC_DEFUN([AM_DISABLE_STATIC], []) + + + +# _LT_ENABLE_FAST_INSTALL([DEFAULT]) +# ---------------------------------- +# implement the --enable-fast-install flag, and support the `fast-install' +# and `disable-fast-install' LT_INIT options. +# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. +m4_define([_LT_ENABLE_FAST_INSTALL], +[m4_define([_LT_ENABLE_FAST_INSTALL_DEFAULT], [m4_if($1, no, no, yes)])dnl +AC_ARG_ENABLE([fast-install], + [AS_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@], + [optimize for fast installation @<:@default=]_LT_ENABLE_FAST_INSTALL_DEFAULT[@:>@])], + [p=${PACKAGE-default} + case $enableval in + yes) enable_fast_install=yes ;; + no) enable_fast_install=no ;; + *) + enable_fast_install=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_fast_install=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac], + [enable_fast_install=]_LT_ENABLE_FAST_INSTALL_DEFAULT) + +_LT_DECL([fast_install], [enable_fast_install], [0], + [Whether or not to optimize for fast installation])dnl +])# _LT_ENABLE_FAST_INSTALL + +LT_OPTION_DEFINE([LT_INIT], [fast-install], [_LT_ENABLE_FAST_INSTALL([yes])]) +LT_OPTION_DEFINE([LT_INIT], [disable-fast-install], [_LT_ENABLE_FAST_INSTALL([no])]) + +# Old names: +AU_DEFUN([AC_ENABLE_FAST_INSTALL], +[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[fast-install]) +AC_DIAGNOSE([obsolete], +[$0: Remove this warning and the call to _LT_SET_OPTION when you put +the `fast-install' option into LT_INIT's first parameter.]) +]) + +AU_DEFUN([AC_DISABLE_FAST_INSTALL], +[_LT_SET_OPTION([LT_INIT], [disable-fast-install]) +AC_DIAGNOSE([obsolete], +[$0: Remove this warning and the call to _LT_SET_OPTION when you put +the `disable-fast-install' option into LT_INIT's first parameter.]) +]) + +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_ENABLE_FAST_INSTALL], []) +dnl AC_DEFUN([AM_DISABLE_FAST_INSTALL], []) + + +# _LT_WITH_PIC([MODE]) +# -------------------- +# implement the --with-pic flag, and support the `pic-only' and `no-pic' +# LT_INIT options. +# MODE is either `yes' or `no'. If omitted, it defaults to `both'. +m4_define([_LT_WITH_PIC], +[AC_ARG_WITH([pic], + [AS_HELP_STRING([--with-pic], + [try to use only PIC/non-PIC objects @<:@default=use both@:>@])], + [pic_mode="$withval"], + [pic_mode=default]) + +test -z "$pic_mode" && pic_mode=m4_default([$1], [default]) + +_LT_DECL([], [pic_mode], [0], [What type of objects to build])dnl +])# _LT_WITH_PIC + +LT_OPTION_DEFINE([LT_INIT], [pic-only], [_LT_WITH_PIC([yes])]) +LT_OPTION_DEFINE([LT_INIT], [no-pic], [_LT_WITH_PIC([no])]) + +# Old name: +AU_DEFUN([AC_LIBTOOL_PICMODE], +[_LT_SET_OPTION([LT_INIT], [pic-only]) +AC_DIAGNOSE([obsolete], +[$0: Remove this warning and the call to _LT_SET_OPTION when you +put the `pic-only' option into LT_INIT's first parameter.]) +]) + +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_PICMODE], []) + + +m4_define([_LTDL_MODE], []) +LT_OPTION_DEFINE([LTDL_INIT], [nonrecursive], + [m4_define([_LTDL_MODE], [nonrecursive])]) +LT_OPTION_DEFINE([LTDL_INIT], [recursive], + [m4_define([_LTDL_MODE], [recursive])]) +LT_OPTION_DEFINE([LTDL_INIT], [subproject], + [m4_define([_LTDL_MODE], [subproject])]) + +m4_define([_LTDL_TYPE], []) +LT_OPTION_DEFINE([LTDL_INIT], [installable], + [m4_define([_LTDL_TYPE], [installable])]) +LT_OPTION_DEFINE([LTDL_INIT], [convenience], + [m4_define([_LTDL_TYPE], [convenience])]) + +# ltsugar.m4 -- libtool m4 base layer. -*-Autoconf-*- +# +# Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc. +# Written by Gary V. Vaughan, 2004 +# +# This file is free software; the Free Software Foundation gives +# unlimited permission to copy and/or distribute it, with or without +# modifications, as long as this notice is preserved. + +# serial 6 ltsugar.m4 + +# This is to help aclocal find these macros, as it can't see m4_define. +AC_DEFUN([LTSUGAR_VERSION], [m4_if([0.1])]) + + +# lt_join(SEP, ARG1, [ARG2...]) +# ----------------------------- +# Produce ARG1SEPARG2...SEPARGn, omitting [] arguments and their +# associated separator. +# Needed until we can rely on m4_join from Autoconf 2.62, since all earlier +# versions in m4sugar had bugs. +m4_define([lt_join], +[m4_if([$#], [1], [], + [$#], [2], [[$2]], + [m4_if([$2], [], [], [[$2]_])$0([$1], m4_shift(m4_shift($@)))])]) +m4_define([_lt_join], +[m4_if([$#$2], [2], [], + [m4_if([$2], [], [], [[$1$2]])$0([$1], m4_shift(m4_shift($@)))])]) + + +# lt_car(LIST) +# lt_cdr(LIST) +# ------------ +# Manipulate m4 lists. +# These macros are necessary as long as will still need to support +# Autoconf-2.59 which quotes differently. +m4_define([lt_car], [[$1]]) +m4_define([lt_cdr], +[m4_if([$#], 0, [m4_fatal([$0: cannot be called without arguments])], + [$#], 1, [], + [m4_dquote(m4_shift($@))])]) +m4_define([lt_unquote], $1) + + +# lt_append(MACRO-NAME, STRING, [SEPARATOR]) +# ------------------------------------------ +# Redefine MACRO-NAME to hold its former content plus `SEPARATOR'`STRING'. +# Note that neither SEPARATOR nor STRING are expanded; they are appended +# to MACRO-NAME as is (leaving the expansion for when MACRO-NAME is invoked). +# No SEPARATOR is output if MACRO-NAME was previously undefined (different +# than defined and empty). +# +# This macro is needed until we can rely on Autoconf 2.62, since earlier +# versions of m4sugar mistakenly expanded SEPARATOR but not STRING. +m4_define([lt_append], +[m4_define([$1], + m4_ifdef([$1], [m4_defn([$1])[$3]])[$2])]) + + + +# lt_combine(SEP, PREFIX-LIST, INFIX, SUFFIX1, [SUFFIX2...]) +# ---------------------------------------------------------- +# Produce a SEP delimited list of all paired combinations of elements of +# PREFIX-LIST with SUFFIX1 through SUFFIXn. Each element of the list +# has the form PREFIXmINFIXSUFFIXn. +# Needed until we can rely on m4_combine added in Autoconf 2.62. +m4_define([lt_combine], +[m4_if(m4_eval([$# > 3]), [1], + [m4_pushdef([_Lt_sep], [m4_define([_Lt_sep], m4_defn([lt_car]))])]]dnl +[[m4_foreach([_Lt_prefix], [$2], + [m4_foreach([_Lt_suffix], + ]m4_dquote(m4_dquote(m4_shift(m4_shift(m4_shift($@)))))[, + [_Lt_sep([$1])[]m4_defn([_Lt_prefix])[$3]m4_defn([_Lt_suffix])])])])]) + + +# lt_if_append_uniq(MACRO-NAME, VARNAME, [SEPARATOR], [UNIQ], [NOT-UNIQ]) +# ----------------------------------------------------------------------- +# Iff MACRO-NAME does not yet contain VARNAME, then append it (delimited +# by SEPARATOR if supplied) and expand UNIQ, else NOT-UNIQ. +m4_define([lt_if_append_uniq], +[m4_ifdef([$1], + [m4_if(m4_index([$3]m4_defn([$1])[$3], [$3$2$3]), [-1], + [lt_append([$1], [$2], [$3])$4], + [$5])], + [lt_append([$1], [$2], [$3])$4])]) + + +# lt_dict_add(DICT, KEY, VALUE) +# ----------------------------- +m4_define([lt_dict_add], +[m4_define([$1($2)], [$3])]) + + +# lt_dict_add_subkey(DICT, KEY, SUBKEY, VALUE) +# -------------------------------------------- +m4_define([lt_dict_add_subkey], +[m4_define([$1($2:$3)], [$4])]) + + +# lt_dict_fetch(DICT, KEY, [SUBKEY]) +# ---------------------------------- +m4_define([lt_dict_fetch], +[m4_ifval([$3], + m4_ifdef([$1($2:$3)], [m4_defn([$1($2:$3)])]), + m4_ifdef([$1($2)], [m4_defn([$1($2)])]))]) + + +# lt_if_dict_fetch(DICT, KEY, [SUBKEY], VALUE, IF-TRUE, [IF-FALSE]) +# ----------------------------------------------------------------- +m4_define([lt_if_dict_fetch], +[m4_if(lt_dict_fetch([$1], [$2], [$3]), [$4], + [$5], + [$6])]) + + +# lt_dict_filter(DICT, [SUBKEY], VALUE, [SEPARATOR], KEY, [...]) +# -------------------------------------------------------------- +m4_define([lt_dict_filter], +[m4_if([$5], [], [], + [lt_join(m4_quote(m4_default([$4], [[, ]])), + lt_unquote(m4_split(m4_normalize(m4_foreach(_Lt_key, lt_car([m4_shiftn(4, $@)]), + [lt_if_dict_fetch([$1], _Lt_key, [$2], [$3], [_Lt_key ])])))))])[]dnl +]) + +# ltversion.m4 -- version numbers -*- Autoconf -*- +# +# Copyright (C) 2004 Free Software Foundation, Inc. +# Written by Scott James Remnant, 2004 +# +# This file is free software; the Free Software Foundation gives +# unlimited permission to copy and/or distribute it, with or without +# modifications, as long as this notice is preserved. + +# @configure_input@ + +# serial 3293 ltversion.m4 +# This file is part of GNU Libtool + +m4_define([LT_PACKAGE_VERSION], [2.4]) +m4_define([LT_PACKAGE_REVISION], [1.3293]) + +AC_DEFUN([LTVERSION_VERSION], +[macro_version='2.4' +macro_revision='1.3293' +_LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?]) +_LT_DECL(, macro_revision, 0) +]) + +# lt~obsolete.m4 -- aclocal satisfying obsolete definitions. -*-Autoconf-*- +# +# Copyright (C) 2004, 2005, 2007, 2009 Free Software Foundation, Inc. +# Written by Scott James Remnant, 2004. +# +# This file is free software; the Free Software Foundation gives +# unlimited permission to copy and/or distribute it, with or without +# modifications, as long as this notice is preserved. + +# serial 5 lt~obsolete.m4 + +# These exist entirely to fool aclocal when bootstrapping libtool. +# +# In the past libtool.m4 has provided macros via AC_DEFUN (or AU_DEFUN) +# which have later been changed to m4_define as they aren't part of the +# exported API, or moved to Autoconf or Automake where they belong. +# +# The trouble is, aclocal is a bit thick. It'll see the old AC_DEFUN +# in /usr/share/aclocal/libtool.m4 and remember it, then when it sees us +# using a macro with the same name in our local m4/libtool.m4 it'll +# pull the old libtool.m4 in (it doesn't see our shiny new m4_define +# and doesn't know about Autoconf macros at all.) +# +# So we provide this file, which has a silly filename so it's always +# included after everything else. This provides aclocal with the +# AC_DEFUNs it wants, but when m4 processes it, it doesn't do anything +# because those macros already exist, or will be overwritten later. +# We use AC_DEFUN over AU_DEFUN for compatibility with aclocal-1.6. +# +# Anytime we withdraw an AC_DEFUN or AU_DEFUN, remember to add it here. +# Yes, that means every name once taken will need to remain here until +# we give up compatibility with versions before 1.7, at which point +# we need to keep only those names which we still refer to. + +# This is to help aclocal find these macros, as it can't see m4_define. +AC_DEFUN([LTOBSOLETE_VERSION], [m4_if([1])]) + +m4_ifndef([AC_LIBTOOL_LINKER_OPTION], [AC_DEFUN([AC_LIBTOOL_LINKER_OPTION])]) +m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP])]) +m4_ifndef([_LT_AC_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH])]) +m4_ifndef([_LT_AC_SHELL_INIT], [AC_DEFUN([_LT_AC_SHELL_INIT])]) +m4_ifndef([_LT_AC_SYS_LIBPATH_AIX], [AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX])]) +m4_ifndef([_LT_PROG_LTMAIN], [AC_DEFUN([_LT_PROG_LTMAIN])]) +m4_ifndef([_LT_AC_TAGVAR], [AC_DEFUN([_LT_AC_TAGVAR])]) +m4_ifndef([AC_LTDL_ENABLE_INSTALL], [AC_DEFUN([AC_LTDL_ENABLE_INSTALL])]) +m4_ifndef([AC_LTDL_PREOPEN], [AC_DEFUN([AC_LTDL_PREOPEN])]) +m4_ifndef([_LT_AC_SYS_COMPILER], [AC_DEFUN([_LT_AC_SYS_COMPILER])]) +m4_ifndef([_LT_AC_LOCK], [AC_DEFUN([_LT_AC_LOCK])]) +m4_ifndef([AC_LIBTOOL_SYS_OLD_ARCHIVE], [AC_DEFUN([AC_LIBTOOL_SYS_OLD_ARCHIVE])]) +m4_ifndef([_LT_AC_TRY_DLOPEN_SELF], [AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF])]) +m4_ifndef([AC_LIBTOOL_PROG_CC_C_O], [AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O])]) +m4_ifndef([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], [AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS])]) +m4_ifndef([AC_LIBTOOL_OBJDIR], [AC_DEFUN([AC_LIBTOOL_OBJDIR])]) +m4_ifndef([AC_LTDL_OBJDIR], [AC_DEFUN([AC_LTDL_OBJDIR])]) +m4_ifndef([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], [AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH])]) +m4_ifndef([AC_LIBTOOL_SYS_LIB_STRIP], [AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP])]) +m4_ifndef([AC_PATH_MAGIC], [AC_DEFUN([AC_PATH_MAGIC])]) +m4_ifndef([AC_PROG_LD_GNU], [AC_DEFUN([AC_PROG_LD_GNU])]) +m4_ifndef([AC_PROG_LD_RELOAD_FLAG], [AC_DEFUN([AC_PROG_LD_RELOAD_FLAG])]) +m4_ifndef([AC_DEPLIBS_CHECK_METHOD], [AC_DEFUN([AC_DEPLIBS_CHECK_METHOD])]) +m4_ifndef([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI])]) +m4_ifndef([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], [AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE])]) +m4_ifndef([AC_LIBTOOL_PROG_COMPILER_PIC], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC])]) +m4_ifndef([AC_LIBTOOL_PROG_LD_SHLIBS], [AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS])]) +m4_ifndef([AC_LIBTOOL_POSTDEP_PREDEP], [AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP])]) +m4_ifndef([LT_AC_PROG_EGREP], [AC_DEFUN([LT_AC_PROG_EGREP])]) +m4_ifndef([LT_AC_PROG_SED], [AC_DEFUN([LT_AC_PROG_SED])]) +m4_ifndef([_LT_CC_BASENAME], [AC_DEFUN([_LT_CC_BASENAME])]) +m4_ifndef([_LT_COMPILER_BOILERPLATE], [AC_DEFUN([_LT_COMPILER_BOILERPLATE])]) +m4_ifndef([_LT_LINKER_BOILERPLATE], [AC_DEFUN([_LT_LINKER_BOILERPLATE])]) +m4_ifndef([_AC_PROG_LIBTOOL], [AC_DEFUN([_AC_PROG_LIBTOOL])]) +m4_ifndef([AC_LIBTOOL_SETUP], [AC_DEFUN([AC_LIBTOOL_SETUP])]) +m4_ifndef([_LT_AC_CHECK_DLFCN], [AC_DEFUN([_LT_AC_CHECK_DLFCN])]) +m4_ifndef([AC_LIBTOOL_SYS_DYNAMIC_LINKER], [AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER])]) +m4_ifndef([_LT_AC_TAGCONFIG], [AC_DEFUN([_LT_AC_TAGCONFIG])]) +m4_ifndef([AC_DISABLE_FAST_INSTALL], [AC_DEFUN([AC_DISABLE_FAST_INSTALL])]) +m4_ifndef([_LT_AC_LANG_CXX], [AC_DEFUN([_LT_AC_LANG_CXX])]) +m4_ifndef([_LT_AC_LANG_F77], [AC_DEFUN([_LT_AC_LANG_F77])]) +m4_ifndef([_LT_AC_LANG_GCJ], [AC_DEFUN([_LT_AC_LANG_GCJ])]) +m4_ifndef([AC_LIBTOOL_LANG_C_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG])]) +m4_ifndef([_LT_AC_LANG_C_CONFIG], [AC_DEFUN([_LT_AC_LANG_C_CONFIG])]) +m4_ifndef([AC_LIBTOOL_LANG_CXX_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG])]) +m4_ifndef([_LT_AC_LANG_CXX_CONFIG], [AC_DEFUN([_LT_AC_LANG_CXX_CONFIG])]) +m4_ifndef([AC_LIBTOOL_LANG_F77_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG])]) +m4_ifndef([_LT_AC_LANG_F77_CONFIG], [AC_DEFUN([_LT_AC_LANG_F77_CONFIG])]) +m4_ifndef([AC_LIBTOOL_LANG_GCJ_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG])]) +m4_ifndef([_LT_AC_LANG_GCJ_CONFIG], [AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG])]) +m4_ifndef([AC_LIBTOOL_LANG_RC_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG])]) +m4_ifndef([_LT_AC_LANG_RC_CONFIG], [AC_DEFUN([_LT_AC_LANG_RC_CONFIG])]) +m4_ifndef([AC_LIBTOOL_CONFIG], [AC_DEFUN([AC_LIBTOOL_CONFIG])]) +m4_ifndef([_LT_AC_FILE_LTDLL_C], [AC_DEFUN([_LT_AC_FILE_LTDLL_C])]) +m4_ifndef([_LT_REQUIRED_DARWIN_CHECKS], [AC_DEFUN([_LT_REQUIRED_DARWIN_CHECKS])]) +m4_ifndef([_LT_AC_PROG_CXXCPP], [AC_DEFUN([_LT_AC_PROG_CXXCPP])]) +m4_ifndef([_LT_PREPARE_SED_QUOTE_VARS], [AC_DEFUN([_LT_PREPARE_SED_QUOTE_VARS])]) +m4_ifndef([_LT_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_PROG_ECHO_BACKSLASH])]) +m4_ifndef([_LT_PROG_F77], [AC_DEFUN([_LT_PROG_F77])]) +m4_ifndef([_LT_PROG_FC], [AC_DEFUN([_LT_PROG_FC])]) +m4_ifndef([_LT_PROG_CXX], [AC_DEFUN([_LT_PROG_CXX])]) + +# pkg.m4 - Macros to locate and utilise pkg-config. -*- Autoconf -*- +# serial 1 (pkg-config-0.24) +# +# Copyright © 2004 Scott James Remnant . +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# PKG_PROG_PKG_CONFIG([MIN-VERSION]) +# ---------------------------------- +AC_DEFUN([PKG_PROG_PKG_CONFIG], +[m4_pattern_forbid([^_?PKG_[A-Z_]+$]) +m4_pattern_allow([^PKG_CONFIG(_(PATH|LIBDIR|SYSROOT_DIR|ALLOW_SYSTEM_(CFLAGS|LIBS)))?$]) +m4_pattern_allow([^PKG_CONFIG_(DISABLE_UNINSTALLED|TOP_BUILD_DIR|DEBUG_SPEW)$]) +AC_ARG_VAR([PKG_CONFIG], [path to pkg-config utility]) +AC_ARG_VAR([PKG_CONFIG_PATH], [directories to add to pkg-config's search path]) +AC_ARG_VAR([PKG_CONFIG_LIBDIR], [path overriding pkg-config's built-in search path]) + +if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then + AC_PATH_TOOL([PKG_CONFIG], [pkg-config]) +fi +if test -n "$PKG_CONFIG"; then + _pkg_min_version=m4_default([$1], [0.9.0]) + AC_MSG_CHECKING([pkg-config is at least version $_pkg_min_version]) + if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then + AC_MSG_RESULT([yes]) + else + AC_MSG_RESULT([no]) + PKG_CONFIG="" + fi +fi[]dnl +])# PKG_PROG_PKG_CONFIG + +# PKG_CHECK_EXISTS(MODULES, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND]) +# +# Check to see whether a particular set of modules exists. Similar +# to PKG_CHECK_MODULES(), but does not set variables or print errors. +# +# Please remember that m4 expands AC_REQUIRE([PKG_PROG_PKG_CONFIG]) +# only at the first occurence in configure.ac, so if the first place +# it's called might be skipped (such as if it is within an "if", you +# have to call PKG_CHECK_EXISTS manually +# -------------------------------------------------------------- +AC_DEFUN([PKG_CHECK_EXISTS], +[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl +if test -n "$PKG_CONFIG" && \ + AC_RUN_LOG([$PKG_CONFIG --exists --print-errors "$1"]); then + m4_default([$2], [:]) +m4_ifvaln([$3], [else + $3])dnl +fi]) + +# _PKG_CONFIG([VARIABLE], [COMMAND], [MODULES]) +# --------------------------------------------- +m4_define([_PKG_CONFIG], +[if test -n "$$1"; then + pkg_cv_[]$1="$$1" + elif test -n "$PKG_CONFIG"; then + PKG_CHECK_EXISTS([$3], + [pkg_cv_[]$1=`$PKG_CONFIG --[]$2 "$3" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes ], + [pkg_failed=yes]) + else + pkg_failed=untried +fi[]dnl +])# _PKG_CONFIG + +# _PKG_SHORT_ERRORS_SUPPORTED +# ----------------------------- +AC_DEFUN([_PKG_SHORT_ERRORS_SUPPORTED], +[AC_REQUIRE([PKG_PROG_PKG_CONFIG]) +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi[]dnl +])# _PKG_SHORT_ERRORS_SUPPORTED + + +# PKG_CHECK_MODULES(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND], +# [ACTION-IF-NOT-FOUND]) +# +# +# Note that if there is a possibility the first call to +# PKG_CHECK_MODULES might not happen, you should be sure to include an +# explicit call to PKG_PROG_PKG_CONFIG in your configure.ac +# +# +# -------------------------------------------------------------- +AC_DEFUN([PKG_CHECK_MODULES], +[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl +AC_ARG_VAR([$1][_CFLAGS], [C compiler flags for $1, overriding pkg-config])dnl +AC_ARG_VAR([$1][_LIBS], [linker flags for $1, overriding pkg-config])dnl + +pkg_failed=no +AC_MSG_CHECKING([for $1]) + +_PKG_CONFIG([$1][_CFLAGS], [cflags], [$2]) +_PKG_CONFIG([$1][_LIBS], [libs], [$2]) + +m4_define([_PKG_TEXT], [Alternatively, you may set the environment variables $1[]_CFLAGS +and $1[]_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details.]) + +if test $pkg_failed = yes; then + AC_MSG_RESULT([no]) + _PKG_SHORT_ERRORS_SUPPORTED + if test $_pkg_short_errors_supported = yes; then + $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "$2" 2>&1` + else + $1[]_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "$2" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$$1[]_PKG_ERRORS" >&AS_MESSAGE_LOG_FD + + m4_default([$4], [AC_MSG_ERROR( +[Package requirements ($2) were not met: + +$$1_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +_PKG_TEXT])[]dnl + ]) +elif test $pkg_failed = untried; then + AC_MSG_RESULT([no]) + m4_default([$4], [AC_MSG_FAILURE( +[The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +_PKG_TEXT + +To get pkg-config, see .])[]dnl + ]) +else + $1[]_CFLAGS=$pkg_cv_[]$1[]_CFLAGS + $1[]_LIBS=$pkg_cv_[]$1[]_LIBS + AC_MSG_RESULT([yes]) + $3 +fi[]dnl +])# PKG_CHECK_MODULES + +# Copyright (C) 2002, 2003, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_AUTOMAKE_VERSION(VERSION) +# ---------------------------- +# Automake X.Y traces this macro to ensure aclocal.m4 has been +# generated from the m4 files accompanying Automake X.Y. +# (This private macro should not be called outside this file.) +AC_DEFUN([AM_AUTOMAKE_VERSION], +[am__api_version='1.11' +dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to +dnl require some minimum version. Point them to the right macro. +m4_if([$1], [1.11.1], [], + [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl +]) + +# _AM_AUTOCONF_VERSION(VERSION) +# ----------------------------- +# aclocal traces this macro to find the Autoconf version. +# This is a private macro too. Using m4_define simplifies +# the logic in aclocal, which can simply ignore this definition. +m4_define([_AM_AUTOCONF_VERSION], []) + +# AM_SET_CURRENT_AUTOMAKE_VERSION +# ------------------------------- +# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced. +# This function is AC_REQUIREd by AM_INIT_AUTOMAKE. +AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], +[AM_AUTOMAKE_VERSION([1.11.1])dnl +m4_ifndef([AC_AUTOCONF_VERSION], + [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl +_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))]) + +# AM_AUX_DIR_EXPAND -*- Autoconf -*- + +# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets +# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to +# `$srcdir', `$srcdir/..', or `$srcdir/../..'. +# +# Of course, Automake must honor this variable whenever it calls a +# tool from the auxiliary directory. The problem is that $srcdir (and +# therefore $ac_aux_dir as well) can be either absolute or relative, +# depending on how configure is run. This is pretty annoying, since +# it makes $ac_aux_dir quite unusable in subdirectories: in the top +# source directory, any form will work fine, but in subdirectories a +# relative path needs to be adjusted first. +# +# $ac_aux_dir/missing +# fails when called from a subdirectory if $ac_aux_dir is relative +# $top_srcdir/$ac_aux_dir/missing +# fails if $ac_aux_dir is absolute, +# fails when called from a subdirectory in a VPATH build with +# a relative $ac_aux_dir +# +# The reason of the latter failure is that $top_srcdir and $ac_aux_dir +# are both prefixed by $srcdir. In an in-source build this is usually +# harmless because $srcdir is `.', but things will broke when you +# start a VPATH build or use an absolute $srcdir. +# +# So we could use something similar to $top_srcdir/$ac_aux_dir/missing, +# iff we strip the leading $srcdir from $ac_aux_dir. That would be: +# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"` +# and then we would define $MISSING as +# MISSING="\${SHELL} $am_aux_dir/missing" +# This will work as long as MISSING is not called from configure, because +# unfortunately $(top_srcdir) has no meaning in configure. +# However there are other variables, like CC, which are often used in +# configure, and could therefore not use this "fixed" $ac_aux_dir. +# +# Another solution, used here, is to always expand $ac_aux_dir to an +# absolute PATH. The drawback is that using absolute paths prevent a +# configured tree to be moved without reconfiguration. + +AC_DEFUN([AM_AUX_DIR_EXPAND], +[dnl Rely on autoconf to set up CDPATH properly. +AC_PREREQ([2.50])dnl +# expand $ac_aux_dir to an absolute path +am_aux_dir=`cd $ac_aux_dir && pwd` +]) + +# AM_CONDITIONAL -*- Autoconf -*- + +# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006, 2008 +# Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 9 + +# AM_CONDITIONAL(NAME, SHELL-CONDITION) +# ------------------------------------- +# Define a conditional. +AC_DEFUN([AM_CONDITIONAL], +[AC_PREREQ(2.52)dnl + ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], + [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl +AC_SUBST([$1_TRUE])dnl +AC_SUBST([$1_FALSE])dnl +_AM_SUBST_NOTMAKE([$1_TRUE])dnl +_AM_SUBST_NOTMAKE([$1_FALSE])dnl +m4_define([_AM_COND_VALUE_$1], [$2])dnl +if $2; then + $1_TRUE= + $1_FALSE='#' +else + $1_TRUE='#' + $1_FALSE= +fi +AC_CONFIG_COMMANDS_PRE( +[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then + AC_MSG_ERROR([[conditional "$1" was never defined. +Usually this means the macro was only invoked conditionally.]]) +fi])]) + +# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2009 +# Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 10 + +# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be +# written in clear, in which case automake, when reading aclocal.m4, +# will think it sees a *use*, and therefore will trigger all it's +# C support machinery. Also note that it means that autoscan, seeing +# CC etc. in the Makefile, will ask for an AC_PROG_CC use... + + +# _AM_DEPENDENCIES(NAME) +# ---------------------- +# See how the compiler implements dependency checking. +# NAME is "CC", "CXX", "GCJ", or "OBJC". +# We try a few techniques and use that to set a single cache variable. +# +# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was +# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular +# dependency, and given that the user is not expected to run this macro, +# just rely on AC_PROG_CC. +AC_DEFUN([_AM_DEPENDENCIES], +[AC_REQUIRE([AM_SET_DEPDIR])dnl +AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl +AC_REQUIRE([AM_MAKE_INCLUDE])dnl +AC_REQUIRE([AM_DEP_TRACK])dnl + +ifelse([$1], CC, [depcc="$CC" am_compiler_list=], + [$1], CXX, [depcc="$CXX" am_compiler_list=], + [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'], + [$1], UPC, [depcc="$UPC" am_compiler_list=], + [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'], + [depcc="$$1" am_compiler_list=]) + +AC_CACHE_CHECK([dependency style of $depcc], + [am_cv_$1_dependencies_compiler_type], +[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then + # We make a subdir and do the tests there. Otherwise we can end up + # making bogus files that we don't know about and never remove. For + # instance it was reported that on HP-UX the gcc test will end up + # making a dummy file named `D' -- because `-MD' means `put the output + # in D'. + mkdir conftest.dir + # Copy depcomp to subdir because otherwise we won't find it if we're + # using a relative directory. + cp "$am_depcomp" conftest.dir + cd conftest.dir + # We will build objects and dependencies in a subdirectory because + # it helps to detect inapplicable dependency modes. For instance + # both Tru64's cc and ICC support -MD to output dependencies as a + # side effect of compilation, but ICC will put the dependencies in + # the current directory while Tru64 will put them in the object + # directory. + mkdir sub + + am_cv_$1_dependencies_compiler_type=none + if test "$am_compiler_list" = ""; then + am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` + fi + am__universal=false + m4_case([$1], [CC], + [case " $depcc " in #( + *\ -arch\ *\ -arch\ *) am__universal=true ;; + esac], + [CXX], + [case " $depcc " in #( + *\ -arch\ *\ -arch\ *) am__universal=true ;; + esac]) + + for depmode in $am_compiler_list; do + # Setup a source with many dependencies, because some compilers + # like to wrap large dependency lists on column 80 (with \), and + # we should not choose a depcomp mode which is confused by this. + # + # We need to recreate these files for each test, as the compiler may + # overwrite some of them when testing with obscure command lines. + # This happens at least with the AIX C compiler. + : > sub/conftest.c + for i in 1 2 3 4 5 6; do + echo '#include "conftst'$i'.h"' >> sub/conftest.c + # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with + # Solaris 8's {/usr,}/bin/sh. + touch sub/conftst$i.h + done + echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf + + # We check with `-c' and `-o' for the sake of the "dashmstdout" + # mode. It turns out that the SunPro C++ compiler does not properly + # handle `-M -o', and we need to detect this. Also, some Intel + # versions had trouble with output in subdirs + am__obj=sub/conftest.${OBJEXT-o} + am__minus_obj="-o $am__obj" + case $depmode in + gcc) + # This depmode causes a compiler race in universal mode. + test "$am__universal" = false || continue + ;; + nosideeffect) + # after this tag, mechanisms are not by side-effect, so they'll + # only be used when explicitly requested + if test "x$enable_dependency_tracking" = xyes; then + continue + else + break + fi + ;; + msvisualcpp | msvcmsys) + # This compiler won't grok `-c -o', but also, the minuso test has + # not run yet. These depmodes are late enough in the game, and + # so weak that their functioning should not be impacted. + am__obj=conftest.${OBJEXT-o} + am__minus_obj= + ;; + none) break ;; + esac + if depmode=$depmode \ + source=sub/conftest.c object=$am__obj \ + depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ + $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ + >/dev/null 2>conftest.err && + grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && + grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && + grep $am__obj sub/conftest.Po > /dev/null 2>&1 && + ${MAKE-make} -s -f confmf > /dev/null 2>&1; then + # icc doesn't choke on unknown options, it will just issue warnings + # or remarks (even with -Werror). So we grep stderr for any message + # that says an option was ignored or not supported. + # When given -MP, icc 7.0 and 7.1 complain thusly: + # icc: Command line warning: ignoring option '-M'; no argument required + # The diagnosis changed in icc 8.0: + # icc: Command line remark: option '-MP' not supported + if (grep 'ignoring option' conftest.err || + grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else + am_cv_$1_dependencies_compiler_type=$depmode + break + fi + fi + done + + cd .. + rm -rf conftest.dir +else + am_cv_$1_dependencies_compiler_type=none +fi +]) +AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type]) +AM_CONDITIONAL([am__fastdep$1], [ + test "x$enable_dependency_tracking" != xno \ + && test "$am_cv_$1_dependencies_compiler_type" = gcc3]) +]) + + +# AM_SET_DEPDIR +# ------------- +# Choose a directory name for dependency files. +# This macro is AC_REQUIREd in _AM_DEPENDENCIES +AC_DEFUN([AM_SET_DEPDIR], +[AC_REQUIRE([AM_SET_LEADING_DOT])dnl +AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl +]) + + +# AM_DEP_TRACK +# ------------ +AC_DEFUN([AM_DEP_TRACK], +[AC_ARG_ENABLE(dependency-tracking, +[ --disable-dependency-tracking speeds up one-time build + --enable-dependency-tracking do not reject slow dependency extractors]) +if test "x$enable_dependency_tracking" != xno; then + am_depcomp="$ac_aux_dir/depcomp" + AMDEPBACKSLASH='\' +fi +AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) +AC_SUBST([AMDEPBACKSLASH])dnl +_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl +]) + +# Generate code to set up dependency tracking. -*- Autoconf -*- + +# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2008 +# Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +#serial 5 + +# _AM_OUTPUT_DEPENDENCY_COMMANDS +# ------------------------------ +AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], +[{ + # Autoconf 2.62 quotes --file arguments for eval, but not when files + # are listed without --file. Let's play safe and only enable the eval + # if we detect the quoting. + case $CONFIG_FILES in + *\'*) eval set x "$CONFIG_FILES" ;; + *) set x $CONFIG_FILES ;; + esac + shift + for mf + do + # Strip MF so we end up with the name of the file. + mf=`echo "$mf" | sed -e 's/:.*$//'` + # Check whether this is an Automake generated Makefile or not. + # We used to match only the files named `Makefile.in', but + # some people rename them; so instead we look at the file content. + # Grep'ing the first line is not enough: some people post-process + # each Makefile.in and add a new line on top of each file to say so. + # Grep'ing the whole file is not good either: AIX grep has a line + # limit of 2048, but all sed's we know have understand at least 4000. + if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then + dirpart=`AS_DIRNAME("$mf")` + else + continue + fi + # Extract the definition of DEPDIR, am__include, and am__quote + # from the Makefile without running `make'. + DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` + test -z "$DEPDIR" && continue + am__include=`sed -n 's/^am__include = //p' < "$mf"` + test -z "am__include" && continue + am__quote=`sed -n 's/^am__quote = //p' < "$mf"` + # When using ansi2knr, U may be empty or an underscore; expand it + U=`sed -n 's/^U = //p' < "$mf"` + # Find all dependency output files, they are included files with + # $(DEPDIR) in their names. We invoke sed twice because it is the + # simplest approach to changing $(DEPDIR) to its actual value in the + # expansion. + for file in `sed -n " + s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ + sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do + # Make sure the directory exists. + test -f "$dirpart/$file" && continue + fdir=`AS_DIRNAME(["$file"])` + AS_MKDIR_P([$dirpart/$fdir]) + # echo "creating $dirpart/$file" + echo '# dummy' > "$dirpart/$file" + done + done +} +])# _AM_OUTPUT_DEPENDENCY_COMMANDS + + +# AM_OUTPUT_DEPENDENCY_COMMANDS +# ----------------------------- +# This macro should only be invoked once -- use via AC_REQUIRE. +# +# This code is only required when automatic dependency tracking +# is enabled. FIXME. This creates each `.P' file that we will +# need in order to bootstrap the dependency handling code. +AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], +[AC_CONFIG_COMMANDS([depfiles], + [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS], + [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"]) +]) + +# Do all the work for Automake. -*- Autoconf -*- + +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, +# 2005, 2006, 2008, 2009 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 16 + +# This macro actually does too much. Some checks are only needed if +# your package does certain things. But this isn't really a big deal. + +# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE]) +# AM_INIT_AUTOMAKE([OPTIONS]) +# ----------------------------------------------- +# The call with PACKAGE and VERSION arguments is the old style +# call (pre autoconf-2.50), which is being phased out. PACKAGE +# and VERSION should now be passed to AC_INIT and removed from +# the call to AM_INIT_AUTOMAKE. +# We support both call styles for the transition. After +# the next Automake release, Autoconf can make the AC_INIT +# arguments mandatory, and then we can depend on a new Autoconf +# release and drop the old call support. +AC_DEFUN([AM_INIT_AUTOMAKE], +[AC_PREREQ([2.62])dnl +dnl Autoconf wants to disallow AM_ names. We explicitly allow +dnl the ones we care about. +m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl +AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl +AC_REQUIRE([AC_PROG_INSTALL])dnl +if test "`cd $srcdir && pwd`" != "`pwd`"; then + # Use -I$(srcdir) only when $(srcdir) != ., so that make's output + # is not polluted with repeated "-I." + AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl + # test to see if srcdir already configured + if test -f $srcdir/config.status; then + AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) + fi +fi + +# test whether we have cygpath +if test -z "$CYGPATH_W"; then + if (cygpath --version) >/dev/null 2>/dev/null; then + CYGPATH_W='cygpath -w' + else + CYGPATH_W=echo + fi +fi +AC_SUBST([CYGPATH_W]) + +# Define the identity of the package. +dnl Distinguish between old-style and new-style calls. +m4_ifval([$2], +[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl + AC_SUBST([PACKAGE], [$1])dnl + AC_SUBST([VERSION], [$2])], +[_AM_SET_OPTIONS([$1])dnl +dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT. +m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,, + [m4_fatal([AC_INIT should be called with package and version arguments])])dnl + AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl + AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl + +_AM_IF_OPTION([no-define],, +[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) + AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl + +# Some tools Automake needs. +AC_REQUIRE([AM_SANITY_CHECK])dnl +AC_REQUIRE([AC_ARG_PROGRAM])dnl +AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version}) +AM_MISSING_PROG(AUTOCONF, autoconf) +AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}) +AM_MISSING_PROG(AUTOHEADER, autoheader) +AM_MISSING_PROG(MAKEINFO, makeinfo) +AC_REQUIRE([AM_PROG_INSTALL_SH])dnl +AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl +AC_REQUIRE([AM_PROG_MKDIR_P])dnl +# We need awk for the "check" target. The system "awk" is bad on +# some platforms. +AC_REQUIRE([AC_PROG_AWK])dnl +AC_REQUIRE([AC_PROG_MAKE_SET])dnl +AC_REQUIRE([AM_SET_LEADING_DOT])dnl +_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], + [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], + [_AM_PROG_TAR([v7])])]) +_AM_IF_OPTION([no-dependencies],, +[AC_PROVIDE_IFELSE([AC_PROG_CC], + [_AM_DEPENDENCIES(CC)], + [define([AC_PROG_CC], + defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl +AC_PROVIDE_IFELSE([AC_PROG_CXX], + [_AM_DEPENDENCIES(CXX)], + [define([AC_PROG_CXX], + defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl +AC_PROVIDE_IFELSE([AC_PROG_OBJC], + [_AM_DEPENDENCIES(OBJC)], + [define([AC_PROG_OBJC], + defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl +]) +_AM_IF_OPTION([silent-rules], [AC_REQUIRE([AM_SILENT_RULES])])dnl +dnl The `parallel-tests' driver may need to know about EXEEXT, so add the +dnl `am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This macro +dnl is hooked onto _AC_COMPILER_EXEEXT early, see below. +AC_CONFIG_COMMANDS_PRE(dnl +[m4_provide_if([_AM_COMPILER_EXEEXT], + [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl +]) + +dnl Hook into `_AC_COMPILER_EXEEXT' early to learn its expansion. Do not +dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further +dnl mangled by Autoconf and run in a shell conditional statement. +m4_define([_AC_COMPILER_EXEEXT], +m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])]) + + +# When config.status generates a header, we must update the stamp-h file. +# This file resides in the same directory as the config header +# that is generated. The stamp files are numbered to have different names. + +# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the +# loop where config.status creates the headers, so we can generate +# our stamp files there. +AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], +[# Compute $1's index in $config_headers. +_am_arg=$1 +_am_stamp_count=1 +for _am_header in $config_headers :; do + case $_am_header in + $_am_arg | $_am_arg:* ) + break ;; + * ) + _am_stamp_count=`expr $_am_stamp_count + 1` ;; + esac +done +echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count]) + +# Copyright (C) 2001, 2003, 2005, 2008 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_PROG_INSTALL_SH +# ------------------ +# Define $install_sh. +AC_DEFUN([AM_PROG_INSTALL_SH], +[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl +if test x"${install_sh}" != xset; then + case $am_aux_dir in + *\ * | *\ *) + install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; + *) + install_sh="\${SHELL} $am_aux_dir/install-sh" + esac +fi +AC_SUBST(install_sh)]) + +# Copyright (C) 2003, 2005 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 2 + +# Check whether the underlying file-system supports filenames +# with a leading dot. For instance MS-DOS doesn't. +AC_DEFUN([AM_SET_LEADING_DOT], +[rm -rf .tst 2>/dev/null +mkdir .tst 2>/dev/null +if test -d .tst; then + am__leading_dot=. +else + am__leading_dot=_ +fi +rmdir .tst 2>/dev/null +AC_SUBST([am__leading_dot])]) + +# Add --enable-maintainer-mode option to configure. -*- Autoconf -*- +# From Jim Meyering + +# Copyright (C) 1996, 1998, 2000, 2001, 2002, 2003, 2004, 2005, 2008 +# Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 5 + +# AM_MAINTAINER_MODE([DEFAULT-MODE]) +# ---------------------------------- +# Control maintainer-specific portions of Makefiles. +# Default is to disable them, unless `enable' is passed literally. +# For symmetry, `disable' may be passed as well. Anyway, the user +# can override the default with the --enable/--disable switch. +AC_DEFUN([AM_MAINTAINER_MODE], +[m4_case(m4_default([$1], [disable]), + [enable], [m4_define([am_maintainer_other], [disable])], + [disable], [m4_define([am_maintainer_other], [enable])], + [m4_define([am_maintainer_other], [enable]) + m4_warn([syntax], [unexpected argument to AM@&t@_MAINTAINER_MODE: $1])]) +AC_MSG_CHECKING([whether to am_maintainer_other maintainer-specific portions of Makefiles]) + dnl maintainer-mode's default is 'disable' unless 'enable' is passed + AC_ARG_ENABLE([maintainer-mode], +[ --][am_maintainer_other][-maintainer-mode am_maintainer_other make rules and dependencies not useful + (and sometimes confusing) to the casual installer], + [USE_MAINTAINER_MODE=$enableval], + [USE_MAINTAINER_MODE=]m4_if(am_maintainer_other, [enable], [no], [yes])) + AC_MSG_RESULT([$USE_MAINTAINER_MODE]) + AM_CONDITIONAL([MAINTAINER_MODE], [test $USE_MAINTAINER_MODE = yes]) + MAINT=$MAINTAINER_MODE_TRUE + AC_SUBST([MAINT])dnl +] +) + +AU_DEFUN([jm_MAINTAINER_MODE], [AM_MAINTAINER_MODE]) + +# Check to see how 'make' treats includes. -*- Autoconf -*- + +# Copyright (C) 2001, 2002, 2003, 2005, 2009 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 4 + +# AM_MAKE_INCLUDE() +# ----------------- +# Check to see how make treats includes. +AC_DEFUN([AM_MAKE_INCLUDE], +[am_make=${MAKE-make} +cat > confinc << 'END' +am__doit: + @echo this is the am__doit target +.PHONY: am__doit +END +# If we don't find an include directive, just comment out the code. +AC_MSG_CHECKING([for style of include used by $am_make]) +am__include="#" +am__quote= +_am_result=none +# First try GNU make style include. +echo "include confinc" > confmf +# Ignore all kinds of additional output from `make'. +case `$am_make -s -f confmf 2> /dev/null` in #( +*the\ am__doit\ target*) + am__include=include + am__quote= + _am_result=GNU + ;; +esac +# Now try BSD make style include. +if test "$am__include" = "#"; then + echo '.include "confinc"' > confmf + case `$am_make -s -f confmf 2> /dev/null` in #( + *the\ am__doit\ target*) + am__include=.include + am__quote="\"" + _am_result=BSD + ;; + esac +fi +AC_SUBST([am__include]) +AC_SUBST([am__quote]) +AC_MSG_RESULT([$_am_result]) +rm -f confinc confmf +]) + +# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- + +# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005, 2008 +# Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 6 + +# AM_MISSING_PROG(NAME, PROGRAM) +# ------------------------------ +AC_DEFUN([AM_MISSING_PROG], +[AC_REQUIRE([AM_MISSING_HAS_RUN]) +$1=${$1-"${am_missing_run}$2"} +AC_SUBST($1)]) + + +# AM_MISSING_HAS_RUN +# ------------------ +# Define MISSING if not defined so far and test if it supports --run. +# If it does, set am_missing_run to use it, otherwise, to nothing. +AC_DEFUN([AM_MISSING_HAS_RUN], +[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl +AC_REQUIRE_AUX_FILE([missing])dnl +if test x"${MISSING+set}" != xset; then + case $am_aux_dir in + *\ * | *\ *) + MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; + *) + MISSING="\${SHELL} $am_aux_dir/missing" ;; + esac +fi +# Use eval to expand $SHELL +if eval "$MISSING --run true"; then + am_missing_run="$MISSING --run " +else + am_missing_run= + AC_MSG_WARN([`missing' script is too old or missing]) +fi +]) + +# Copyright (C) 2003, 2004, 2005, 2006 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_PROG_MKDIR_P +# --------------- +# Check for `mkdir -p'. +AC_DEFUN([AM_PROG_MKDIR_P], +[AC_PREREQ([2.60])dnl +AC_REQUIRE([AC_PROG_MKDIR_P])dnl +dnl Automake 1.8 to 1.9.6 used to define mkdir_p. We now use MKDIR_P, +dnl while keeping a definition of mkdir_p for backward compatibility. +dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile. +dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of +dnl Makefile.ins that do not define MKDIR_P, so we do our own +dnl adjustment using top_builddir (which is defined more often than +dnl MKDIR_P). +AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl +case $mkdir_p in + [[\\/$]]* | ?:[[\\/]]*) ;; + */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;; +esac +]) + +# Helper functions for option handling. -*- Autoconf -*- + +# Copyright (C) 2001, 2002, 2003, 2005, 2008 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 4 + +# _AM_MANGLE_OPTION(NAME) +# ----------------------- +AC_DEFUN([_AM_MANGLE_OPTION], +[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) + +# _AM_SET_OPTION(NAME) +# ------------------------------ +# Set option NAME. Presently that only means defining a flag for this option. +AC_DEFUN([_AM_SET_OPTION], +[m4_define(_AM_MANGLE_OPTION([$1]), 1)]) + +# _AM_SET_OPTIONS(OPTIONS) +# ---------------------------------- +# OPTIONS is a space-separated list of Automake options. +AC_DEFUN([_AM_SET_OPTIONS], +[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) + +# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) +# ------------------------------------------- +# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. +AC_DEFUN([_AM_IF_OPTION], +[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) + +# Check to make sure that the build environment is sane. -*- Autoconf -*- + +# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005, 2008 +# Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 5 + +# AM_SANITY_CHECK +# --------------- +AC_DEFUN([AM_SANITY_CHECK], +[AC_MSG_CHECKING([whether build environment is sane]) +# Just in case +sleep 1 +echo timestamp > conftest.file +# Reject unsafe characters in $srcdir or the absolute working directory +# name. Accept space and tab only in the latter. +am_lf=' +' +case `pwd` in + *[[\\\"\#\$\&\'\`$am_lf]]*) + AC_MSG_ERROR([unsafe absolute working directory name]);; +esac +case $srcdir in + *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*) + AC_MSG_ERROR([unsafe srcdir value: `$srcdir']);; +esac + +# Do `set' in a subshell so we don't clobber the current shell's +# arguments. Must try -L first in case configure is actually a +# symlink; some systems play weird games with the mod time of symlinks +# (eg FreeBSD returns the mod time of the symlink's containing +# directory). +if ( + set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` + if test "$[*]" = "X"; then + # -L didn't work. + set X `ls -t "$srcdir/configure" conftest.file` + fi + rm -f conftest.file + if test "$[*]" != "X $srcdir/configure conftest.file" \ + && test "$[*]" != "X conftest.file $srcdir/configure"; then + + # If neither matched, then we have a broken ls. This can happen + # if, for instance, CONFIG_SHELL is bash and it inherits a + # broken ls alias from the environment. This has actually + # happened. Such a system could not be considered "sane". + AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken +alias in your environment]) + fi + + test "$[2]" = conftest.file + ) +then + # Ok. + : +else + AC_MSG_ERROR([newly created file is older than distributed files! +Check your system clock]) +fi +AC_MSG_RESULT(yes)]) + +# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_PROG_INSTALL_STRIP +# --------------------- +# One issue with vendor `install' (even GNU) is that you can't +# specify the program used to strip binaries. This is especially +# annoying in cross-compiling environments, where the build's strip +# is unlikely to handle the host's binaries. +# Fortunately install-sh will honor a STRIPPROG variable, so we +# always use install-sh in `make install-strip', and initialize +# STRIPPROG with the value of the STRIP variable (set by the user). +AC_DEFUN([AM_PROG_INSTALL_STRIP], +[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl +# Installed binaries are usually stripped using `strip' when the user +# run `make install-strip'. However `strip' might not be the right +# tool to use in cross-compilation environments, therefore Automake +# will honor the `STRIP' environment variable to overrule this program. +dnl Don't test for $cross_compiling = yes, because it might be `maybe'. +if test "$cross_compiling" != no; then + AC_CHECK_TOOL([STRIP], [strip], :) +fi +INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" +AC_SUBST([INSTALL_STRIP_PROGRAM])]) + +# Copyright (C) 2006, 2008 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 2 + +# _AM_SUBST_NOTMAKE(VARIABLE) +# --------------------------- +# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in. +# This macro is traced by Automake. +AC_DEFUN([_AM_SUBST_NOTMAKE]) + +# AM_SUBST_NOTMAKE(VARIABLE) +# --------------------------- +# Public sister of _AM_SUBST_NOTMAKE. +AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)]) + +# Check how to create a tarball. -*- Autoconf -*- + +# Copyright (C) 2004, 2005 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 2 + +# _AM_PROG_TAR(FORMAT) +# -------------------- +# Check how to create a tarball in format FORMAT. +# FORMAT should be one of `v7', `ustar', or `pax'. +# +# Substitute a variable $(am__tar) that is a command +# writing to stdout a FORMAT-tarball containing the directory +# $tardir. +# tardir=directory && $(am__tar) > result.tar +# +# Substitute a variable $(am__untar) that extract such +# a tarball read from stdin. +# $(am__untar) < result.tar +AC_DEFUN([_AM_PROG_TAR], +[# Always define AMTAR for backward compatibility. +AM_MISSING_PROG([AMTAR], [tar]) +m4_if([$1], [v7], + [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'], + [m4_case([$1], [ustar],, [pax],, + [m4_fatal([Unknown tar format])]) +AC_MSG_CHECKING([how to create a $1 tar archive]) +# Loop over all known methods to create a tar archive until one works. +_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' +_am_tools=${am_cv_prog_tar_$1-$_am_tools} +# Do not fold the above two line into one, because Tru64 sh and +# Solaris sh will not grok spaces in the rhs of `-'. +for _am_tool in $_am_tools +do + case $_am_tool in + gnutar) + for _am_tar in tar gnutar gtar; + do + AM_RUN_LOG([$_am_tar --version]) && break + done + am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' + am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' + am__untar="$_am_tar -xf -" + ;; + plaintar) + # Must skip GNU tar: if it does not support --format= it doesn't create + # ustar tarball either. + (tar --version) >/dev/null 2>&1 && continue + am__tar='tar chf - "$$tardir"' + am__tar_='tar chf - "$tardir"' + am__untar='tar xf -' + ;; + pax) + am__tar='pax -L -x $1 -w "$$tardir"' + am__tar_='pax -L -x $1 -w "$tardir"' + am__untar='pax -r' + ;; + cpio) + am__tar='find "$$tardir" -print | cpio -o -H $1 -L' + am__tar_='find "$tardir" -print | cpio -o -H $1 -L' + am__untar='cpio -i -H $1 -d' + ;; + none) + am__tar=false + am__tar_=false + am__untar=false + ;; + esac + + # If the value was cached, stop now. We just wanted to have am__tar + # and am__untar set. + test -n "${am_cv_prog_tar_$1}" && break + + # tar/untar a dummy directory, and stop if the command works + rm -rf conftest.dir + mkdir conftest.dir + echo GrepMe > conftest.dir/file + AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) + rm -rf conftest.dir + if test -s conftest.tar; then + AM_RUN_LOG([$am__untar /dev/null 2>&1 && break + fi +done +rm -rf conftest.dir + +AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) +AC_MSG_RESULT([$am_cv_prog_tar_$1])]) +AC_SUBST([am__tar]) +AC_SUBST([am__untar]) +]) # _AM_PROG_TAR + diff --git a/software/scsi2sd-util/libzipper-1.0.3/android/zipper/Android.mk b/software/scsi2sd-util/libzipper-1.0.3/android/zipper/Android.mk new file mode 100644 index 0000000..48ebedc --- /dev/null +++ b/software/scsi2sd-util/libzipper-1.0.3/android/zipper/Android.mk @@ -0,0 +1,42 @@ +LOCAL_PATH := $(call my-dir) + +include $(CLEAR_VARS) + +LOCAL_CFLAGS := -W -Wall -Werror -D_POSIX_C_SOURCE=200112 + +LOCAL_EXPORT_C_INCLUDES := $(LOCAL_PATH)/../../ + +# bionic /sys/types.h fails with -std=c++0x, as it doesn't include +# stdint.h, but tries to use uint64_t. +LOCAL_CPPFLAGS := -std=gnu++0x +LOCAL_EXPORT_CPPFLAGS := -std=gnu++0x + +# libzipper throws exceptions +LOCAL_CPPFLAGS += -fexceptions -frtti +LOCAL_EXPORT_CPPFLAGS += -fexceptions -frtti + +LOCAL_CPP_EXTENSION := .cc + +LOCAL_LDLIBS := -lz +LOCAL_EXPORT_LDLIBS := -lz + +LOCAL_MODULE := zipper +LOCAL_MODULE_FILENAME := libzipper + +LOCAL_SRC_FILES :=\ + ../../CompressedFile.cc \ + ../../deflate.cc \ + ../../gzip.cc \ + ../../zip.cc \ + ../../Compressor.cc \ + ../../Exception.cc \ + ../../Reader.cc \ + ../../zipper.cc \ + ../../Container.cc \ + ../../FileReader.cc \ + ../../Decompressor.cc \ + ../../FileWriter.cc \ + ../../Writer.cc \ + ../../port/strerror_posix.cc \ + +include $(BUILD_STATIC_LIBRARY) diff --git a/software/scsi2sd-util/libzipper-1.0.3/autoconfig.h.in b/software/scsi2sd-util/libzipper-1.0.3/autoconfig.h.in new file mode 100644 index 0000000..a2bb88d --- /dev/null +++ b/software/scsi2sd-util/libzipper-1.0.3/autoconfig.h.in @@ -0,0 +1,72 @@ +/* autoconfig.h.in. Generated from configure.ac by autoheader. */ + +/* Define to 1 if you have the declaration of `strerror_r', and to 0 if you + don't. */ +#undef HAVE_DECL_STRERROR_R + +/* Define to 1 if you have the header file. */ +#undef HAVE_DLFCN_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_INTTYPES_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_MEMORY_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_STDINT_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_STDLIB_H + +/* Define to 1 if you have the `strerror_r' function. */ +#undef HAVE_STRERROR_R + +/* Define to 1 if you have the header file. */ +#undef HAVE_STRINGS_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_STRING_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_SYS_STAT_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_SYS_TYPES_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_UNISTD_H + +/* Define to the sub-directory in which libtool stores uninstalled libraries. + */ +#undef LT_OBJDIR + +/* Name of package */ +#undef PACKAGE + +/* Define to the address where bug reports for this package should be sent. */ +#undef PACKAGE_BUGREPORT + +/* Define to the full name of this package. */ +#undef PACKAGE_NAME + +/* Define to the full name and version of this package. */ +#undef PACKAGE_STRING + +/* Define to the one symbol short name of this package. */ +#undef PACKAGE_TARNAME + +/* Define to the home page for this package. */ +#undef PACKAGE_URL + +/* Define to the version of this package. */ +#undef PACKAGE_VERSION + +/* Define to 1 if you have the ANSI C header files. */ +#undef STDC_HEADERS + +/* Define to 1 if strerror_r returns char *. */ +#undef STRERROR_R_CHAR_P + +/* Version number of package */ +#undef VERSION diff --git a/software/scsi2sd-util/libzipper-1.0.3/autogen.sh b/software/scsi2sd-util/libzipper-1.0.3/autogen.sh new file mode 100755 index 0000000..3f026c4 --- /dev/null +++ b/software/scsi2sd-util/libzipper-1.0.3/autogen.sh @@ -0,0 +1,2 @@ +#!/bin/sh +autoreconf --force --install diff --git a/software/scsi2sd-util/libzipper-1.0.3/config.guess b/software/scsi2sd-util/libzipper-1.0.3/config.guess new file mode 100755 index 0000000..40eaed4 --- /dev/null +++ b/software/scsi2sd-util/libzipper-1.0.3/config.guess @@ -0,0 +1,1517 @@ +#! /bin/sh +# Attempt to guess a canonical system name. +# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, +# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, +# 2011 Free Software Foundation, Inc. + +timestamp='2011-05-11' + +# This file is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA +# 02110-1301, USA. +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + + +# Originally written by Per Bothner. Please send patches (context +# diff format) to and include a ChangeLog +# entry. +# +# This script attempts to guess a canonical system name similar to +# config.sub. If it succeeds, it prints the system name on stdout, and +# exits with 0. Otherwise, it exits with 1. +# +# You can get the latest version of this script from: +# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD + +me=`echo "$0" | sed -e 's,.*/,,'` + +usage="\ +Usage: $0 [OPTION] + +Output the configuration name of the system \`$me' is run on. + +Operation modes: + -h, --help print this help, then exit + -t, --time-stamp print date of last modification, then exit + -v, --version print version number, then exit + +Report bugs and patches to ." + +version="\ +GNU config.guess ($timestamp) + +Originally written by Per Bothner. +Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, +2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free +Software Foundation, Inc. + +This is free software; see the source for copying conditions. There is NO +warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." + +help=" +Try \`$me --help' for more information." + +# Parse command line +while test $# -gt 0 ; do + case $1 in + --time-stamp | --time* | -t ) + echo "$timestamp" ; exit ;; + --version | -v ) + echo "$version" ; exit ;; + --help | --h* | -h ) + echo "$usage"; exit ;; + -- ) # Stop option processing + shift; break ;; + - ) # Use stdin as input. + break ;; + -* ) + echo "$me: invalid option $1$help" >&2 + exit 1 ;; + * ) + break ;; + esac +done + +if test $# != 0; then + echo "$me: too many arguments$help" >&2 + exit 1 +fi + +trap 'exit 1' 1 2 15 + +# CC_FOR_BUILD -- compiler used by this script. Note that the use of a +# compiler to aid in system detection is discouraged as it requires +# temporary files to be created and, as you can see below, it is a +# headache to deal with in a portable fashion. + +# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still +# use `HOST_CC' if defined, but it is deprecated. + +# Portable tmp directory creation inspired by the Autoconf team. + +set_cc_for_build=' +trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ; +trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ; +: ${TMPDIR=/tmp} ; + { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } || + { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } || + { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } || + { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ; +dummy=$tmp/dummy ; +tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ; +case $CC_FOR_BUILD,$HOST_CC,$CC in + ,,) echo "int x;" > $dummy.c ; + for c in cc gcc c89 c99 ; do + if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then + CC_FOR_BUILD="$c"; break ; + fi ; + done ; + if test x"$CC_FOR_BUILD" = x ; then + CC_FOR_BUILD=no_compiler_found ; + fi + ;; + ,,*) CC_FOR_BUILD=$CC ;; + ,*,*) CC_FOR_BUILD=$HOST_CC ;; +esac ; set_cc_for_build= ;' + +# This is needed to find uname on a Pyramid OSx when run in the BSD universe. +# (ghazi@noc.rutgers.edu 1994-08-24) +if (test -f /.attbin/uname) >/dev/null 2>&1 ; then + PATH=$PATH:/.attbin ; export PATH +fi + +UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown +UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown +UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown +UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown + +# Note: order is significant - the case branches are not exclusive. + +case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in + *:NetBSD:*:*) + # NetBSD (nbsd) targets should (where applicable) match one or + # more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*, + # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently + # switched to ELF, *-*-netbsd* would select the old + # object file format. This provides both forward + # compatibility and a consistent mechanism for selecting the + # object file format. + # + # Note: NetBSD doesn't particularly care about the vendor + # portion of the name. We always set it to "unknown". + sysctl="sysctl -n hw.machine_arch" + UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \ + /usr/sbin/$sysctl 2>/dev/null || echo unknown)` + case "${UNAME_MACHINE_ARCH}" in + armeb) machine=armeb-unknown ;; + arm*) machine=arm-unknown ;; + sh3el) machine=shl-unknown ;; + sh3eb) machine=sh-unknown ;; + sh5el) machine=sh5le-unknown ;; + *) machine=${UNAME_MACHINE_ARCH}-unknown ;; + esac + # The Operating System including object format, if it has switched + # to ELF recently, or will in the future. + case "${UNAME_MACHINE_ARCH}" in + arm*|i386|m68k|ns32k|sh3*|sparc|vax) + eval $set_cc_for_build + if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \ + | grep -q __ELF__ + then + # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout). + # Return netbsd for either. FIX? + os=netbsd + else + os=netbsdelf + fi + ;; + *) + os=netbsd + ;; + esac + # The OS release + # Debian GNU/NetBSD machines have a different userland, and + # thus, need a distinct triplet. However, they do not need + # kernel version information, so it can be replaced with a + # suitable tag, in the style of linux-gnu. + case "${UNAME_VERSION}" in + Debian*) + release='-gnu' + ;; + *) + release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` + ;; + esac + # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM: + # contains redundant information, the shorter form: + # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used. + echo "${machine}-${os}${release}" + exit ;; + *:OpenBSD:*:*) + UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'` + echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE} + exit ;; + *:ekkoBSD:*:*) + echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE} + exit ;; + *:SolidBSD:*:*) + echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE} + exit ;; + macppc:MirBSD:*:*) + echo powerpc-unknown-mirbsd${UNAME_RELEASE} + exit ;; + *:MirBSD:*:*) + echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE} + exit ;; + alpha:OSF1:*:*) + case $UNAME_RELEASE in + *4.0) + UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'` + ;; + *5.*) + UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'` + ;; + esac + # According to Compaq, /usr/sbin/psrinfo has been available on + # OSF/1 and Tru64 systems produced since 1995. I hope that + # covers most systems running today. This code pipes the CPU + # types through head -n 1, so we only detect the type of CPU 0. + ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1` + case "$ALPHA_CPU_TYPE" in + "EV4 (21064)") + UNAME_MACHINE="alpha" ;; + "EV4.5 (21064)") + UNAME_MACHINE="alpha" ;; + "LCA4 (21066/21068)") + UNAME_MACHINE="alpha" ;; + "EV5 (21164)") + UNAME_MACHINE="alphaev5" ;; + "EV5.6 (21164A)") + UNAME_MACHINE="alphaev56" ;; + "EV5.6 (21164PC)") + UNAME_MACHINE="alphapca56" ;; + "EV5.7 (21164PC)") + UNAME_MACHINE="alphapca57" ;; + "EV6 (21264)") + UNAME_MACHINE="alphaev6" ;; + "EV6.7 (21264A)") + UNAME_MACHINE="alphaev67" ;; + "EV6.8CB (21264C)") + UNAME_MACHINE="alphaev68" ;; + "EV6.8AL (21264B)") + UNAME_MACHINE="alphaev68" ;; + "EV6.8CX (21264D)") + UNAME_MACHINE="alphaev68" ;; + "EV6.9A (21264/EV69A)") + UNAME_MACHINE="alphaev69" ;; + "EV7 (21364)") + UNAME_MACHINE="alphaev7" ;; + "EV7.9 (21364A)") + UNAME_MACHINE="alphaev79" ;; + esac + # A Pn.n version is a patched version. + # A Vn.n version is a released version. + # A Tn.n version is a released field test version. + # A Xn.n version is an unreleased experimental baselevel. + # 1.2 uses "1.2" for uname -r. + echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` + # Reset EXIT trap before exiting to avoid spurious non-zero exit code. + exitcode=$? + trap '' 0 + exit $exitcode ;; + Alpha\ *:Windows_NT*:*) + # How do we know it's Interix rather than the generic POSIX subsystem? + # Should we change UNAME_MACHINE based on the output of uname instead + # of the specific Alpha model? + echo alpha-pc-interix + exit ;; + 21064:Windows_NT:50:3) + echo alpha-dec-winnt3.5 + exit ;; + Amiga*:UNIX_System_V:4.0:*) + echo m68k-unknown-sysv4 + exit ;; + *:[Aa]miga[Oo][Ss]:*:*) + echo ${UNAME_MACHINE}-unknown-amigaos + exit ;; + *:[Mm]orph[Oo][Ss]:*:*) + echo ${UNAME_MACHINE}-unknown-morphos + exit ;; + *:OS/390:*:*) + echo i370-ibm-openedition + exit ;; + *:z/VM:*:*) + echo s390-ibm-zvmoe + exit ;; + *:OS400:*:*) + echo powerpc-ibm-os400 + exit ;; + arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*) + echo arm-acorn-riscix${UNAME_RELEASE} + exit ;; + arm:riscos:*:*|arm:RISCOS:*:*) + echo arm-unknown-riscos + exit ;; + SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*) + echo hppa1.1-hitachi-hiuxmpp + exit ;; + Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*) + # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE. + if test "`(/bin/universe) 2>/dev/null`" = att ; then + echo pyramid-pyramid-sysv3 + else + echo pyramid-pyramid-bsd + fi + exit ;; + NILE*:*:*:dcosx) + echo pyramid-pyramid-svr4 + exit ;; + DRS?6000:unix:4.0:6*) + echo sparc-icl-nx6 + exit ;; + DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*) + case `/usr/bin/uname -p` in + sparc) echo sparc-icl-nx7; exit ;; + esac ;; + s390x:SunOS:*:*) + echo ${UNAME_MACHINE}-ibm-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + sun4H:SunOS:5.*:*) + echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*) + echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + i86pc:AuroraUX:5.*:* | i86xen:AuroraUX:5.*:*) + echo i386-pc-auroraux${UNAME_RELEASE} + exit ;; + i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*) + eval $set_cc_for_build + SUN_ARCH="i386" + # If there is a compiler, see if it is configured for 64-bit objects. + # Note that the Sun cc does not turn __LP64__ into 1 like gcc does. + # This test works for both compilers. + if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then + if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \ + (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \ + grep IS_64BIT_ARCH >/dev/null + then + SUN_ARCH="x86_64" + fi + fi + echo ${SUN_ARCH}-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + sun4*:SunOS:6*:*) + # According to config.sub, this is the proper way to canonicalize + # SunOS6. Hard to guess exactly what SunOS6 will be like, but + # it's likely to be more like Solaris than SunOS4. + echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + sun4*:SunOS:*:*) + case "`/usr/bin/arch -k`" in + Series*|S4*) + UNAME_RELEASE=`uname -v` + ;; + esac + # Japanese Language versions have a version number like `4.1.3-JL'. + echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'` + exit ;; + sun3*:SunOS:*:*) + echo m68k-sun-sunos${UNAME_RELEASE} + exit ;; + sun*:*:4.2BSD:*) + UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null` + test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3 + case "`/bin/arch`" in + sun3) + echo m68k-sun-sunos${UNAME_RELEASE} + ;; + sun4) + echo sparc-sun-sunos${UNAME_RELEASE} + ;; + esac + exit ;; + aushp:SunOS:*:*) + echo sparc-auspex-sunos${UNAME_RELEASE} + exit ;; + # The situation for MiNT is a little confusing. The machine name + # can be virtually everything (everything which is not + # "atarist" or "atariste" at least should have a processor + # > m68000). The system name ranges from "MiNT" over "FreeMiNT" + # to the lowercase version "mint" (or "freemint"). Finally + # the system name "TOS" denotes a system which is actually not + # MiNT. But MiNT is downward compatible to TOS, so this should + # be no problem. + atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} + exit ;; + atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} + exit ;; + *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} + exit ;; + milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*) + echo m68k-milan-mint${UNAME_RELEASE} + exit ;; + hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*) + echo m68k-hades-mint${UNAME_RELEASE} + exit ;; + *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*) + echo m68k-unknown-mint${UNAME_RELEASE} + exit ;; + m68k:machten:*:*) + echo m68k-apple-machten${UNAME_RELEASE} + exit ;; + powerpc:machten:*:*) + echo powerpc-apple-machten${UNAME_RELEASE} + exit ;; + RISC*:Mach:*:*) + echo mips-dec-mach_bsd4.3 + exit ;; + RISC*:ULTRIX:*:*) + echo mips-dec-ultrix${UNAME_RELEASE} + exit ;; + VAX*:ULTRIX*:*:*) + echo vax-dec-ultrix${UNAME_RELEASE} + exit ;; + 2020:CLIX:*:* | 2430:CLIX:*:*) + echo clipper-intergraph-clix${UNAME_RELEASE} + exit ;; + mips:*:*:UMIPS | mips:*:*:RISCos) + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c +#ifdef __cplusplus +#include /* for printf() prototype */ + int main (int argc, char *argv[]) { +#else + int main (argc, argv) int argc; char *argv[]; { +#endif + #if defined (host_mips) && defined (MIPSEB) + #if defined (SYSTYPE_SYSV) + printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0); + #endif + #if defined (SYSTYPE_SVR4) + printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0); + #endif + #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD) + printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0); + #endif + #endif + exit (-1); + } +EOF + $CC_FOR_BUILD -o $dummy $dummy.c && + dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` && + SYSTEM_NAME=`$dummy $dummyarg` && + { echo "$SYSTEM_NAME"; exit; } + echo mips-mips-riscos${UNAME_RELEASE} + exit ;; + Motorola:PowerMAX_OS:*:*) + echo powerpc-motorola-powermax + exit ;; + Motorola:*:4.3:PL8-*) + echo powerpc-harris-powermax + exit ;; + Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*) + echo powerpc-harris-powermax + exit ;; + Night_Hawk:Power_UNIX:*:*) + echo powerpc-harris-powerunix + exit ;; + m88k:CX/UX:7*:*) + echo m88k-harris-cxux7 + exit ;; + m88k:*:4*:R4*) + echo m88k-motorola-sysv4 + exit ;; + m88k:*:3*:R3*) + echo m88k-motorola-sysv3 + exit ;; + AViiON:dgux:*:*) + # DG/UX returns AViiON for all architectures + UNAME_PROCESSOR=`/usr/bin/uname -p` + if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ] + then + if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \ + [ ${TARGET_BINARY_INTERFACE}x = x ] + then + echo m88k-dg-dgux${UNAME_RELEASE} + else + echo m88k-dg-dguxbcs${UNAME_RELEASE} + fi + else + echo i586-dg-dgux${UNAME_RELEASE} + fi + exit ;; + M88*:DolphinOS:*:*) # DolphinOS (SVR3) + echo m88k-dolphin-sysv3 + exit ;; + M88*:*:R3*:*) + # Delta 88k system running SVR3 + echo m88k-motorola-sysv3 + exit ;; + XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3) + echo m88k-tektronix-sysv3 + exit ;; + Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD) + echo m68k-tektronix-bsd + exit ;; + *:IRIX*:*:*) + echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'` + exit ;; + ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX. + echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id + exit ;; # Note that: echo "'`uname -s`'" gives 'AIX ' + i*86:AIX:*:*) + echo i386-ibm-aix + exit ;; + ia64:AIX:*:*) + if [ -x /usr/bin/oslevel ] ; then + IBM_REV=`/usr/bin/oslevel` + else + IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} + fi + echo ${UNAME_MACHINE}-ibm-aix${IBM_REV} + exit ;; + *:AIX:2:3) + if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #include + + main() + { + if (!__power_pc()) + exit(1); + puts("powerpc-ibm-aix3.2.5"); + exit(0); + } +EOF + if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` + then + echo "$SYSTEM_NAME" + else + echo rs6000-ibm-aix3.2.5 + fi + elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then + echo rs6000-ibm-aix3.2.4 + else + echo rs6000-ibm-aix3.2 + fi + exit ;; + *:AIX:*:[4567]) + IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'` + if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then + IBM_ARCH=rs6000 + else + IBM_ARCH=powerpc + fi + if [ -x /usr/bin/oslevel ] ; then + IBM_REV=`/usr/bin/oslevel` + else + IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} + fi + echo ${IBM_ARCH}-ibm-aix${IBM_REV} + exit ;; + *:AIX:*:*) + echo rs6000-ibm-aix + exit ;; + ibmrt:4.4BSD:*|romp-ibm:BSD:*) + echo romp-ibm-bsd4.4 + exit ;; + ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and + echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to + exit ;; # report: romp-ibm BSD 4.3 + *:BOSX:*:*) + echo rs6000-bull-bosx + exit ;; + DPX/2?00:B.O.S.:*:*) + echo m68k-bull-sysv3 + exit ;; + 9000/[34]??:4.3bsd:1.*:*) + echo m68k-hp-bsd + exit ;; + hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*) + echo m68k-hp-bsd4.4 + exit ;; + 9000/[34678]??:HP-UX:*:*) + HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` + case "${UNAME_MACHINE}" in + 9000/31? ) HP_ARCH=m68000 ;; + 9000/[34]?? ) HP_ARCH=m68k ;; + 9000/[678][0-9][0-9]) + if [ -x /usr/bin/getconf ]; then + sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null` + sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null` + case "${sc_cpu_version}" in + 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0 + 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1 + 532) # CPU_PA_RISC2_0 + case "${sc_kernel_bits}" in + 32) HP_ARCH="hppa2.0n" ;; + 64) HP_ARCH="hppa2.0w" ;; + '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20 + esac ;; + esac + fi + if [ "${HP_ARCH}" = "" ]; then + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + + #define _HPUX_SOURCE + #include + #include + + int main () + { + #if defined(_SC_KERNEL_BITS) + long bits = sysconf(_SC_KERNEL_BITS); + #endif + long cpu = sysconf (_SC_CPU_VERSION); + + switch (cpu) + { + case CPU_PA_RISC1_0: puts ("hppa1.0"); break; + case CPU_PA_RISC1_1: puts ("hppa1.1"); break; + case CPU_PA_RISC2_0: + #if defined(_SC_KERNEL_BITS) + switch (bits) + { + case 64: puts ("hppa2.0w"); break; + case 32: puts ("hppa2.0n"); break; + default: puts ("hppa2.0"); break; + } break; + #else /* !defined(_SC_KERNEL_BITS) */ + puts ("hppa2.0"); break; + #endif + default: puts ("hppa1.0"); break; + } + exit (0); + } +EOF + (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy` + test -z "$HP_ARCH" && HP_ARCH=hppa + fi ;; + esac + if [ ${HP_ARCH} = "hppa2.0w" ] + then + eval $set_cc_for_build + + # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating + # 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler + # generating 64-bit code. GNU and HP use different nomenclature: + # + # $ CC_FOR_BUILD=cc ./config.guess + # => hppa2.0w-hp-hpux11.23 + # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess + # => hppa64-hp-hpux11.23 + + if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | + grep -q __LP64__ + then + HP_ARCH="hppa2.0w" + else + HP_ARCH="hppa64" + fi + fi + echo ${HP_ARCH}-hp-hpux${HPUX_REV} + exit ;; + ia64:HP-UX:*:*) + HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` + echo ia64-hp-hpux${HPUX_REV} + exit ;; + 3050*:HI-UX:*:*) + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #include + int + main () + { + long cpu = sysconf (_SC_CPU_VERSION); + /* The order matters, because CPU_IS_HP_MC68K erroneously returns + true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct + results, however. */ + if (CPU_IS_PA_RISC (cpu)) + { + switch (cpu) + { + case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break; + case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break; + case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break; + default: puts ("hppa-hitachi-hiuxwe2"); break; + } + } + else if (CPU_IS_HP_MC68K (cpu)) + puts ("m68k-hitachi-hiuxwe2"); + else puts ("unknown-hitachi-hiuxwe2"); + exit (0); + } +EOF + $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` && + { echo "$SYSTEM_NAME"; exit; } + echo unknown-hitachi-hiuxwe2 + exit ;; + 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* ) + echo hppa1.1-hp-bsd + exit ;; + 9000/8??:4.3bsd:*:*) + echo hppa1.0-hp-bsd + exit ;; + *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*) + echo hppa1.0-hp-mpeix + exit ;; + hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* ) + echo hppa1.1-hp-osf + exit ;; + hp8??:OSF1:*:*) + echo hppa1.0-hp-osf + exit ;; + i*86:OSF1:*:*) + if [ -x /usr/sbin/sysversion ] ; then + echo ${UNAME_MACHINE}-unknown-osf1mk + else + echo ${UNAME_MACHINE}-unknown-osf1 + fi + exit ;; + parisc*:Lites*:*:*) + echo hppa1.1-hp-lites + exit ;; + C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*) + echo c1-convex-bsd + exit ;; + C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*) + if getsysinfo -f scalar_acc + then echo c32-convex-bsd + else echo c2-convex-bsd + fi + exit ;; + C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*) + echo c34-convex-bsd + exit ;; + C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*) + echo c38-convex-bsd + exit ;; + C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*) + echo c4-convex-bsd + exit ;; + CRAY*Y-MP:*:*:*) + echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + CRAY*[A-Z]90:*:*:*) + echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \ + | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \ + -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \ + -e 's/\.[^.]*$/.X/' + exit ;; + CRAY*TS:*:*:*) + echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + CRAY*T3E:*:*:*) + echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + CRAY*SV1:*:*:*) + echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + *:UNICOS/mp:*:*) + echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*) + FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` + FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` + FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'` + echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" + exit ;; + 5000:UNIX_System_V:4.*:*) + FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` + FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'` + echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" + exit ;; + i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*) + echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE} + exit ;; + sparc*:BSD/OS:*:*) + echo sparc-unknown-bsdi${UNAME_RELEASE} + exit ;; + *:BSD/OS:*:*) + echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE} + exit ;; + *:FreeBSD:*:*) + case ${UNAME_MACHINE} in + pc98) + echo i386-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; + amd64) + echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; + *) + echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; + esac + exit ;; + i*:CYGWIN*:*) + echo ${UNAME_MACHINE}-pc-cygwin + exit ;; + *:MINGW*:*) + echo ${UNAME_MACHINE}-pc-mingw32 + exit ;; + i*:windows32*:*) + # uname -m includes "-pc" on this system. + echo ${UNAME_MACHINE}-mingw32 + exit ;; + i*:PW*:*) + echo ${UNAME_MACHINE}-pc-pw32 + exit ;; + *:Interix*:*) + case ${UNAME_MACHINE} in + x86) + echo i586-pc-interix${UNAME_RELEASE} + exit ;; + authenticamd | genuineintel | EM64T) + echo x86_64-unknown-interix${UNAME_RELEASE} + exit ;; + IA64) + echo ia64-unknown-interix${UNAME_RELEASE} + exit ;; + esac ;; + [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*) + echo i${UNAME_MACHINE}-pc-mks + exit ;; + 8664:Windows_NT:*) + echo x86_64-pc-mks + exit ;; + i*:Windows_NT*:* | Pentium*:Windows_NT*:*) + # How do we know it's Interix rather than the generic POSIX subsystem? + # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we + # UNAME_MACHINE based on the output of uname instead of i386? + echo i586-pc-interix + exit ;; + i*:UWIN*:*) + echo ${UNAME_MACHINE}-pc-uwin + exit ;; + amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*) + echo x86_64-unknown-cygwin + exit ;; + p*:CYGWIN*:*) + echo powerpcle-unknown-cygwin + exit ;; + prep*:SunOS:5.*:*) + echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + *:GNU:*:*) + # the GNU system + echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'` + exit ;; + *:GNU/*:*:*) + # other systems with GNU libc and userland + echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu + exit ;; + i*86:Minix:*:*) + echo ${UNAME_MACHINE}-pc-minix + exit ;; + alpha:Linux:*:*) + case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in + EV5) UNAME_MACHINE=alphaev5 ;; + EV56) UNAME_MACHINE=alphaev56 ;; + PCA56) UNAME_MACHINE=alphapca56 ;; + PCA57) UNAME_MACHINE=alphapca56 ;; + EV6) UNAME_MACHINE=alphaev6 ;; + EV67) UNAME_MACHINE=alphaev67 ;; + EV68*) UNAME_MACHINE=alphaev68 ;; + esac + objdump --private-headers /bin/sh | grep -q ld.so.1 + if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi + echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} + exit ;; + arm*:Linux:*:*) + eval $set_cc_for_build + if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \ + | grep -q __ARM_EABI__ + then + echo ${UNAME_MACHINE}-unknown-linux-gnu + else + if echo __ARM_PCS_VFP | $CC_FOR_BUILD -E - 2>/dev/null \ + | grep -q __ARM_PCS_VFP + then + echo ${UNAME_MACHINE}-unknown-linux-gnueabi + else + echo ${UNAME_MACHINE}-unknown-linux-gnueabihf + fi + fi + exit ;; + avr32*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + cris:Linux:*:*) + echo cris-axis-linux-gnu + exit ;; + crisv32:Linux:*:*) + echo crisv32-axis-linux-gnu + exit ;; + frv:Linux:*:*) + echo frv-unknown-linux-gnu + exit ;; + i*86:Linux:*:*) + LIBC=gnu + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #ifdef __dietlibc__ + LIBC=dietlibc + #endif +EOF + eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC'` + echo "${UNAME_MACHINE}-pc-linux-${LIBC}" + exit ;; + ia64:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + m32r*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + m68*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + mips:Linux:*:* | mips64:Linux:*:*) + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #undef CPU + #undef ${UNAME_MACHINE} + #undef ${UNAME_MACHINE}el + #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) + CPU=${UNAME_MACHINE}el + #else + #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) + CPU=${UNAME_MACHINE} + #else + CPU= + #endif + #endif +EOF + eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^CPU'` + test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; } + ;; + or32:Linux:*:*) + echo or32-unknown-linux-gnu + exit ;; + padre:Linux:*:*) + echo sparc-unknown-linux-gnu + exit ;; + parisc64:Linux:*:* | hppa64:Linux:*:*) + echo hppa64-unknown-linux-gnu + exit ;; + parisc:Linux:*:* | hppa:Linux:*:*) + # Look for CPU level + case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in + PA7*) echo hppa1.1-unknown-linux-gnu ;; + PA8*) echo hppa2.0-unknown-linux-gnu ;; + *) echo hppa-unknown-linux-gnu ;; + esac + exit ;; + ppc64:Linux:*:*) + echo powerpc64-unknown-linux-gnu + exit ;; + ppc:Linux:*:*) + echo powerpc-unknown-linux-gnu + exit ;; + s390:Linux:*:* | s390x:Linux:*:*) + echo ${UNAME_MACHINE}-ibm-linux + exit ;; + sh64*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + sh*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + sparc:Linux:*:* | sparc64:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + tile*:Linux:*:*) + echo ${UNAME_MACHINE}-tilera-linux-gnu + exit ;; + vax:Linux:*:*) + echo ${UNAME_MACHINE}-dec-linux-gnu + exit ;; + x86_64:Linux:*:*) + echo x86_64-unknown-linux-gnu + exit ;; + xtensa*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + i*86:DYNIX/ptx:4*:*) + # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. + # earlier versions are messed up and put the nodename in both + # sysname and nodename. + echo i386-sequent-sysv4 + exit ;; + i*86:UNIX_SV:4.2MP:2.*) + # Unixware is an offshoot of SVR4, but it has its own version + # number series starting with 2... + # I am not positive that other SVR4 systems won't match this, + # I just have to hope. -- rms. + # Use sysv4.2uw... so that sysv4* matches it. + echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION} + exit ;; + i*86:OS/2:*:*) + # If we were able to find `uname', then EMX Unix compatibility + # is probably installed. + echo ${UNAME_MACHINE}-pc-os2-emx + exit ;; + i*86:XTS-300:*:STOP) + echo ${UNAME_MACHINE}-unknown-stop + exit ;; + i*86:atheos:*:*) + echo ${UNAME_MACHINE}-unknown-atheos + exit ;; + i*86:syllable:*:*) + echo ${UNAME_MACHINE}-pc-syllable + exit ;; + i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.[02]*:*) + echo i386-unknown-lynxos${UNAME_RELEASE} + exit ;; + i*86:*DOS:*:*) + echo ${UNAME_MACHINE}-pc-msdosdjgpp + exit ;; + i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*) + UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'` + if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then + echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL} + else + echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL} + fi + exit ;; + i*86:*:5:[678]*) + # UnixWare 7.x, OpenUNIX and OpenServer 6. + case `/bin/uname -X | grep "^Machine"` in + *486*) UNAME_MACHINE=i486 ;; + *Pentium) UNAME_MACHINE=i586 ;; + *Pent*|*Celeron) UNAME_MACHINE=i686 ;; + esac + echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION} + exit ;; + i*86:*:3.2:*) + if test -f /usr/options/cb.name; then + UNAME_REL=`sed -n 's/.*Version //p' /dev/null >/dev/null ; then + UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')` + (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486 + (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \ + && UNAME_MACHINE=i586 + (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \ + && UNAME_MACHINE=i686 + (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \ + && UNAME_MACHINE=i686 + echo ${UNAME_MACHINE}-pc-sco$UNAME_REL + else + echo ${UNAME_MACHINE}-pc-sysv32 + fi + exit ;; + pc:*:*:*) + # Left here for compatibility: + # uname -m prints for DJGPP always 'pc', but it prints nothing about + # the processor, so we play safe by assuming i586. + # Note: whatever this is, it MUST be the same as what config.sub + # prints for the "djgpp" host, or else GDB configury will decide that + # this is a cross-build. + echo i586-pc-msdosdjgpp + exit ;; + Intel:Mach:3*:*) + echo i386-pc-mach3 + exit ;; + paragon:*:*:*) + echo i860-intel-osf1 + exit ;; + i860:*:4.*:*) # i860-SVR4 + if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then + echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4 + else # Add other i860-SVR4 vendors below as they are discovered. + echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4 + fi + exit ;; + mini*:CTIX:SYS*5:*) + # "miniframe" + echo m68010-convergent-sysv + exit ;; + mc68k:UNIX:SYSTEM5:3.51m) + echo m68k-convergent-sysv + exit ;; + M680?0:D-NIX:5.3:*) + echo m68k-diab-dnix + exit ;; + M68*:*:R3V[5678]*:*) + test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;; + 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0) + OS_REL='' + test -r /etc/.relid \ + && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` + /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ + && { echo i486-ncr-sysv4.3${OS_REL}; exit; } + /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ + && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;; + 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*) + /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ + && { echo i486-ncr-sysv4; exit; } ;; + NCR*:*:4.2:* | MPRAS*:*:4.2:*) + OS_REL='.3' + test -r /etc/.relid \ + && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` + /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ + && { echo i486-ncr-sysv4.3${OS_REL}; exit; } + /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ + && { echo i586-ncr-sysv4.3${OS_REL}; exit; } + /bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \ + && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;; + m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*) + echo m68k-unknown-lynxos${UNAME_RELEASE} + exit ;; + mc68030:UNIX_System_V:4.*:*) + echo m68k-atari-sysv4 + exit ;; + TSUNAMI:LynxOS:2.*:*) + echo sparc-unknown-lynxos${UNAME_RELEASE} + exit ;; + rs6000:LynxOS:2.*:*) + echo rs6000-unknown-lynxos${UNAME_RELEASE} + exit ;; + PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.[02]*:*) + echo powerpc-unknown-lynxos${UNAME_RELEASE} + exit ;; + SM[BE]S:UNIX_SV:*:*) + echo mips-dde-sysv${UNAME_RELEASE} + exit ;; + RM*:ReliantUNIX-*:*:*) + echo mips-sni-sysv4 + exit ;; + RM*:SINIX-*:*:*) + echo mips-sni-sysv4 + exit ;; + *:SINIX-*:*:*) + if uname -p 2>/dev/null >/dev/null ; then + UNAME_MACHINE=`(uname -p) 2>/dev/null` + echo ${UNAME_MACHINE}-sni-sysv4 + else + echo ns32k-sni-sysv + fi + exit ;; + PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort + # says + echo i586-unisys-sysv4 + exit ;; + *:UNIX_System_V:4*:FTX*) + # From Gerald Hewes . + # How about differentiating between stratus architectures? -djm + echo hppa1.1-stratus-sysv4 + exit ;; + *:*:*:FTX*) + # From seanf@swdc.stratus.com. + echo i860-stratus-sysv4 + exit ;; + i*86:VOS:*:*) + # From Paul.Green@stratus.com. + echo ${UNAME_MACHINE}-stratus-vos + exit ;; + *:VOS:*:*) + # From Paul.Green@stratus.com. + echo hppa1.1-stratus-vos + exit ;; + mc68*:A/UX:*:*) + echo m68k-apple-aux${UNAME_RELEASE} + exit ;; + news*:NEWS-OS:6*:*) + echo mips-sony-newsos6 + exit ;; + R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*) + if [ -d /usr/nec ]; then + echo mips-nec-sysv${UNAME_RELEASE} + else + echo mips-unknown-sysv${UNAME_RELEASE} + fi + exit ;; + BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only. + echo powerpc-be-beos + exit ;; + BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only. + echo powerpc-apple-beos + exit ;; + BePC:BeOS:*:*) # BeOS running on Intel PC compatible. + echo i586-pc-beos + exit ;; + BePC:Haiku:*:*) # Haiku running on Intel PC compatible. + echo i586-pc-haiku + exit ;; + SX-4:SUPER-UX:*:*) + echo sx4-nec-superux${UNAME_RELEASE} + exit ;; + SX-5:SUPER-UX:*:*) + echo sx5-nec-superux${UNAME_RELEASE} + exit ;; + SX-6:SUPER-UX:*:*) + echo sx6-nec-superux${UNAME_RELEASE} + exit ;; + SX-7:SUPER-UX:*:*) + echo sx7-nec-superux${UNAME_RELEASE} + exit ;; + SX-8:SUPER-UX:*:*) + echo sx8-nec-superux${UNAME_RELEASE} + exit ;; + SX-8R:SUPER-UX:*:*) + echo sx8r-nec-superux${UNAME_RELEASE} + exit ;; + Power*:Rhapsody:*:*) + echo powerpc-apple-rhapsody${UNAME_RELEASE} + exit ;; + *:Rhapsody:*:*) + echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE} + exit ;; + *:Darwin:*:*) + UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown + case $UNAME_PROCESSOR in + i386) + eval $set_cc_for_build + if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then + if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \ + (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \ + grep IS_64BIT_ARCH >/dev/null + then + UNAME_PROCESSOR="x86_64" + fi + fi ;; + unknown) UNAME_PROCESSOR=powerpc ;; + esac + echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE} + exit ;; + *:procnto*:*:* | *:QNX:[0123456789]*:*) + UNAME_PROCESSOR=`uname -p` + if test "$UNAME_PROCESSOR" = "x86"; then + UNAME_PROCESSOR=i386 + UNAME_MACHINE=pc + fi + echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE} + exit ;; + *:QNX:*:4*) + echo i386-pc-qnx + exit ;; + NEO-?:NONSTOP_KERNEL:*:*) + echo neo-tandem-nsk${UNAME_RELEASE} + exit ;; + NSE-?:NONSTOP_KERNEL:*:*) + echo nse-tandem-nsk${UNAME_RELEASE} + exit ;; + NSR-?:NONSTOP_KERNEL:*:*) + echo nsr-tandem-nsk${UNAME_RELEASE} + exit ;; + *:NonStop-UX:*:*) + echo mips-compaq-nonstopux + exit ;; + BS2000:POSIX*:*:*) + echo bs2000-siemens-sysv + exit ;; + DS/*:UNIX_System_V:*:*) + echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE} + exit ;; + *:Plan9:*:*) + # "uname -m" is not consistent, so use $cputype instead. 386 + # is converted to i386 for consistency with other x86 + # operating systems. + if test "$cputype" = "386"; then + UNAME_MACHINE=i386 + else + UNAME_MACHINE="$cputype" + fi + echo ${UNAME_MACHINE}-unknown-plan9 + exit ;; + *:TOPS-10:*:*) + echo pdp10-unknown-tops10 + exit ;; + *:TENEX:*:*) + echo pdp10-unknown-tenex + exit ;; + KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*) + echo pdp10-dec-tops20 + exit ;; + XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*) + echo pdp10-xkl-tops20 + exit ;; + *:TOPS-20:*:*) + echo pdp10-unknown-tops20 + exit ;; + *:ITS:*:*) + echo pdp10-unknown-its + exit ;; + SEI:*:*:SEIUX) + echo mips-sei-seiux${UNAME_RELEASE} + exit ;; + *:DragonFly:*:*) + echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` + exit ;; + *:*VMS:*:*) + UNAME_MACHINE=`(uname -p) 2>/dev/null` + case "${UNAME_MACHINE}" in + A*) echo alpha-dec-vms ; exit ;; + I*) echo ia64-dec-vms ; exit ;; + V*) echo vax-dec-vms ; exit ;; + esac ;; + *:XENIX:*:SysV) + echo i386-pc-xenix + exit ;; + i*86:skyos:*:*) + echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//' + exit ;; + i*86:rdos:*:*) + echo ${UNAME_MACHINE}-pc-rdos + exit ;; + i*86:AROS:*:*) + echo ${UNAME_MACHINE}-pc-aros + exit ;; +esac + +#echo '(No uname command or uname output not recognized.)' 1>&2 +#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2 + +eval $set_cc_for_build +cat >$dummy.c < +# include +#endif +main () +{ +#if defined (sony) +#if defined (MIPSEB) + /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed, + I don't know.... */ + printf ("mips-sony-bsd\n"); exit (0); +#else +#include + printf ("m68k-sony-newsos%s\n", +#ifdef NEWSOS4 + "4" +#else + "" +#endif + ); exit (0); +#endif +#endif + +#if defined (__arm) && defined (__acorn) && defined (__unix) + printf ("arm-acorn-riscix\n"); exit (0); +#endif + +#if defined (hp300) && !defined (hpux) + printf ("m68k-hp-bsd\n"); exit (0); +#endif + +#if defined (NeXT) +#if !defined (__ARCHITECTURE__) +#define __ARCHITECTURE__ "m68k" +#endif + int version; + version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`; + if (version < 4) + printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version); + else + printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version); + exit (0); +#endif + +#if defined (MULTIMAX) || defined (n16) +#if defined (UMAXV) + printf ("ns32k-encore-sysv\n"); exit (0); +#else +#if defined (CMU) + printf ("ns32k-encore-mach\n"); exit (0); +#else + printf ("ns32k-encore-bsd\n"); exit (0); +#endif +#endif +#endif + +#if defined (__386BSD__) + printf ("i386-pc-bsd\n"); exit (0); +#endif + +#if defined (sequent) +#if defined (i386) + printf ("i386-sequent-dynix\n"); exit (0); +#endif +#if defined (ns32000) + printf ("ns32k-sequent-dynix\n"); exit (0); +#endif +#endif + +#if defined (_SEQUENT_) + struct utsname un; + + uname(&un); + + if (strncmp(un.version, "V2", 2) == 0) { + printf ("i386-sequent-ptx2\n"); exit (0); + } + if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */ + printf ("i386-sequent-ptx1\n"); exit (0); + } + printf ("i386-sequent-ptx\n"); exit (0); + +#endif + +#if defined (vax) +# if !defined (ultrix) +# include +# if defined (BSD) +# if BSD == 43 + printf ("vax-dec-bsd4.3\n"); exit (0); +# else +# if BSD == 199006 + printf ("vax-dec-bsd4.3reno\n"); exit (0); +# else + printf ("vax-dec-bsd\n"); exit (0); +# endif +# endif +# else + printf ("vax-dec-bsd\n"); exit (0); +# endif +# else + printf ("vax-dec-ultrix\n"); exit (0); +# endif +#endif + +#if defined (alliant) && defined (i860) + printf ("i860-alliant-bsd\n"); exit (0); +#endif + + exit (1); +} +EOF + +$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` && + { echo "$SYSTEM_NAME"; exit; } + +# Apollos put the system type in the environment. + +test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; } + +# Convex versions that predate uname can use getsysinfo(1) + +if [ -x /usr/convex/getsysinfo ] +then + case `getsysinfo -f cpu_type` in + c1*) + echo c1-convex-bsd + exit ;; + c2*) + if getsysinfo -f scalar_acc + then echo c32-convex-bsd + else echo c2-convex-bsd + fi + exit ;; + c34*) + echo c34-convex-bsd + exit ;; + c38*) + echo c38-convex-bsd + exit ;; + c4*) + echo c4-convex-bsd + exit ;; + esac +fi + +cat >&2 < in order to provide the needed +information to handle your system. + +config.guess timestamp = $timestamp + +uname -m = `(uname -m) 2>/dev/null || echo unknown` +uname -r = `(uname -r) 2>/dev/null || echo unknown` +uname -s = `(uname -s) 2>/dev/null || echo unknown` +uname -v = `(uname -v) 2>/dev/null || echo unknown` + +/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null` +/bin/uname -X = `(/bin/uname -X) 2>/dev/null` + +hostinfo = `(hostinfo) 2>/dev/null` +/bin/universe = `(/bin/universe) 2>/dev/null` +/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null` +/bin/arch = `(/bin/arch) 2>/dev/null` +/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null` +/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null` + +UNAME_MACHINE = ${UNAME_MACHINE} +UNAME_RELEASE = ${UNAME_RELEASE} +UNAME_SYSTEM = ${UNAME_SYSTEM} +UNAME_VERSION = ${UNAME_VERSION} +EOF + +exit 1 + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "timestamp='" +# time-stamp-format: "%:y-%02m-%02d" +# time-stamp-end: "'" +# End: diff --git a/software/scsi2sd-util/libzipper-1.0.3/config.sub b/software/scsi2sd-util/libzipper-1.0.3/config.sub new file mode 100755 index 0000000..30fdca8 --- /dev/null +++ b/software/scsi2sd-util/libzipper-1.0.3/config.sub @@ -0,0 +1,1760 @@ +#! /bin/sh +# Configuration validation subroutine script. +# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, +# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, +# 2011 Free Software Foundation, Inc. + +timestamp='2011-03-23' + +# This file is (in principle) common to ALL GNU software. +# The presence of a machine in this file suggests that SOME GNU software +# can handle that machine. It does not imply ALL GNU software can. +# +# This file is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA +# 02110-1301, USA. +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + + +# Please send patches to . Submit a context +# diff and a properly formatted GNU ChangeLog entry. +# +# Configuration subroutine to validate and canonicalize a configuration type. +# Supply the specified configuration type as an argument. +# If it is invalid, we print an error message on stderr and exit with code 1. +# Otherwise, we print the canonical config type on stdout and succeed. + +# You can get the latest version of this script from: +# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD + +# This file is supposed to be the same for all GNU packages +# and recognize all the CPU types, system types and aliases +# that are meaningful with *any* GNU software. +# Each package is responsible for reporting which valid configurations +# it does not support. The user should be able to distinguish +# a failure to support a valid configuration from a meaningless +# configuration. + +# The goal of this file is to map all the various variations of a given +# machine specification into a single specification in the form: +# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM +# or in some cases, the newer four-part form: +# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM +# It is wrong to echo any other type of specification. + +me=`echo "$0" | sed -e 's,.*/,,'` + +usage="\ +Usage: $0 [OPTION] CPU-MFR-OPSYS + $0 [OPTION] ALIAS + +Canonicalize a configuration name. + +Operation modes: + -h, --help print this help, then exit + -t, --time-stamp print date of last modification, then exit + -v, --version print version number, then exit + +Report bugs and patches to ." + +version="\ +GNU config.sub ($timestamp) + +Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, +2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free +Software Foundation, Inc. + +This is free software; see the source for copying conditions. There is NO +warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." + +help=" +Try \`$me --help' for more information." + +# Parse command line +while test $# -gt 0 ; do + case $1 in + --time-stamp | --time* | -t ) + echo "$timestamp" ; exit ;; + --version | -v ) + echo "$version" ; exit ;; + --help | --h* | -h ) + echo "$usage"; exit ;; + -- ) # Stop option processing + shift; break ;; + - ) # Use stdin as input. + break ;; + -* ) + echo "$me: invalid option $1$help" + exit 1 ;; + + *local*) + # First pass through any local machine types. + echo $1 + exit ;; + + * ) + break ;; + esac +done + +case $# in + 0) echo "$me: missing argument$help" >&2 + exit 1;; + 1) ;; + *) echo "$me: too many arguments$help" >&2 + exit 1;; +esac + +# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any). +# Here we must recognize all the valid KERNEL-OS combinations. +maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'` +case $maybe_os in + nto-qnx* | linux-gnu* | linux-android* | linux-dietlibc | linux-newlib* | \ + linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | \ + knetbsd*-gnu* | netbsd*-gnu* | \ + kopensolaris*-gnu* | \ + storm-chaos* | os2-emx* | rtmk-nova*) + os=-$maybe_os + basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'` + ;; + *) + basic_machine=`echo $1 | sed 's/-[^-]*$//'` + if [ $basic_machine != $1 ] + then os=`echo $1 | sed 's/.*-/-/'` + else os=; fi + ;; +esac + +### Let's recognize common machines as not being operating systems so +### that things like config.sub decstation-3100 work. We also +### recognize some manufacturers as not being operating systems, so we +### can provide default operating systems below. +case $os in + -sun*os*) + # Prevent following clause from handling this invalid input. + ;; + -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \ + -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \ + -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \ + -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\ + -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \ + -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \ + -apple | -axis | -knuth | -cray | -microblaze) + os= + basic_machine=$1 + ;; + -bluegene*) + os=-cnk + ;; + -sim | -cisco | -oki | -wec | -winbond) + os= + basic_machine=$1 + ;; + -scout) + ;; + -wrs) + os=-vxworks + basic_machine=$1 + ;; + -chorusos*) + os=-chorusos + basic_machine=$1 + ;; + -chorusrdb) + os=-chorusrdb + basic_machine=$1 + ;; + -hiux*) + os=-hiuxwe2 + ;; + -sco6) + os=-sco5v6 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco5) + os=-sco3.2v5 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco4) + os=-sco3.2v4 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco3.2.[4-9]*) + os=`echo $os | sed -e 's/sco3.2./sco3.2v/'` + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco3.2v[4-9]*) + # Don't forget version if it is 3.2v4 or newer. + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco5v6*) + # Don't forget version if it is 3.2v4 or newer. + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco*) + os=-sco3.2v2 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -udk*) + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -isc) + os=-isc2.2 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -clix*) + basic_machine=clipper-intergraph + ;; + -isc*) + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -lynx*) + os=-lynxos + ;; + -ptx*) + basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'` + ;; + -windowsnt*) + os=`echo $os | sed -e 's/windowsnt/winnt/'` + ;; + -psos*) + os=-psos + ;; + -mint | -mint[0-9]*) + basic_machine=m68k-atari + os=-mint + ;; +esac + +# Decode aliases for certain CPU-COMPANY combinations. +case $basic_machine in + # Recognize the basic CPU types without company name. + # Some are omitted here because they have special meanings below. + 1750a | 580 \ + | a29k \ + | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \ + | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \ + | am33_2.0 \ + | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr | avr32 \ + | bfin \ + | c4x | clipper \ + | d10v | d30v | dlx | dsp16xx \ + | fido | fr30 | frv \ + | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \ + | i370 | i860 | i960 | ia64 \ + | ip2k | iq2000 \ + | lm32 \ + | m32c | m32r | m32rle | m68000 | m68k | m88k \ + | maxq | mb | microblaze | mcore | mep | metag \ + | mips | mipsbe | mipseb | mipsel | mipsle \ + | mips16 \ + | mips64 | mips64el \ + | mips64octeon | mips64octeonel \ + | mips64orion | mips64orionel \ + | mips64r5900 | mips64r5900el \ + | mips64vr | mips64vrel \ + | mips64vr4100 | mips64vr4100el \ + | mips64vr4300 | mips64vr4300el \ + | mips64vr5000 | mips64vr5000el \ + | mips64vr5900 | mips64vr5900el \ + | mipsisa32 | mipsisa32el \ + | mipsisa32r2 | mipsisa32r2el \ + | mipsisa64 | mipsisa64el \ + | mipsisa64r2 | mipsisa64r2el \ + | mipsisa64sb1 | mipsisa64sb1el \ + | mipsisa64sr71k | mipsisa64sr71kel \ + | mipstx39 | mipstx39el \ + | mn10200 | mn10300 \ + | moxie \ + | mt \ + | msp430 \ + | nds32 | nds32le | nds32be \ + | nios | nios2 \ + | ns16k | ns32k \ + | open8 \ + | or32 \ + | pdp10 | pdp11 | pj | pjl \ + | powerpc | powerpc64 | powerpc64le | powerpcle \ + | pyramid \ + | rx \ + | score \ + | sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \ + | sh64 | sh64le \ + | sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \ + | sparcv8 | sparcv9 | sparcv9b | sparcv9v \ + | spu \ + | tahoe | tic4x | tic54x | tic55x | tic6x | tic80 | tron \ + | ubicom32 \ + | v850 | v850e \ + | we32k \ + | x86 | xc16x | xstormy16 | xtensa \ + | z8k | z80) + basic_machine=$basic_machine-unknown + ;; + c54x) + basic_machine=tic54x-unknown + ;; + c55x) + basic_machine=tic55x-unknown + ;; + c6x) + basic_machine=tic6x-unknown + ;; + m6811 | m68hc11 | m6812 | m68hc12 | picochip) + # Motorola 68HC11/12. + basic_machine=$basic_machine-unknown + os=-none + ;; + m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k) + ;; + ms1) + basic_machine=mt-unknown + ;; + + strongarm | thumb | xscale) + basic_machine=arm-unknown + ;; + + xscaleeb) + basic_machine=armeb-unknown + ;; + + xscaleel) + basic_machine=armel-unknown + ;; + + # We use `pc' rather than `unknown' + # because (1) that's what they normally are, and + # (2) the word "unknown" tends to confuse beginning users. + i*86 | x86_64) + basic_machine=$basic_machine-pc + ;; + # Object if more than one company name word. + *-*-*) + echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 + exit 1 + ;; + # Recognize the basic CPU types with company name. + 580-* \ + | a29k-* \ + | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \ + | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \ + | alphapca5[67]-* | alpha64pca5[67]-* | arc-* \ + | arm-* | armbe-* | armle-* | armeb-* | armv*-* \ + | avr-* | avr32-* \ + | bfin-* | bs2000-* \ + | c[123]* | c30-* | [cjt]90-* | c4x-* \ + | clipper-* | craynv-* | cydra-* \ + | d10v-* | d30v-* | dlx-* \ + | elxsi-* \ + | f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \ + | h8300-* | h8500-* \ + | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \ + | i*86-* | i860-* | i960-* | ia64-* \ + | ip2k-* | iq2000-* \ + | lm32-* \ + | m32c-* | m32r-* | m32rle-* \ + | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \ + | m88110-* | m88k-* | maxq-* | mcore-* | metag-* | microblaze-* \ + | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \ + | mips16-* \ + | mips64-* | mips64el-* \ + | mips64octeon-* | mips64octeonel-* \ + | mips64orion-* | mips64orionel-* \ + | mips64r5900-* | mips64r5900el-* \ + | mips64vr-* | mips64vrel-* \ + | mips64vr4100-* | mips64vr4100el-* \ + | mips64vr4300-* | mips64vr4300el-* \ + | mips64vr5000-* | mips64vr5000el-* \ + | mips64vr5900-* | mips64vr5900el-* \ + | mipsisa32-* | mipsisa32el-* \ + | mipsisa32r2-* | mipsisa32r2el-* \ + | mipsisa64-* | mipsisa64el-* \ + | mipsisa64r2-* | mipsisa64r2el-* \ + | mipsisa64sb1-* | mipsisa64sb1el-* \ + | mipsisa64sr71k-* | mipsisa64sr71kel-* \ + | mipstx39-* | mipstx39el-* \ + | mmix-* \ + | mt-* \ + | msp430-* \ + | nds32-* | nds32le-* | nds32be-* \ + | nios-* | nios2-* \ + | none-* | np1-* | ns16k-* | ns32k-* \ + | open8-* \ + | orion-* \ + | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \ + | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* \ + | pyramid-* \ + | romp-* | rs6000-* | rx-* \ + | sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \ + | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \ + | sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \ + | sparclite-* \ + | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | sv1-* | sx?-* \ + | tahoe-* \ + | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \ + | tile-* | tilegx-* \ + | tron-* \ + | ubicom32-* \ + | v850-* | v850e-* | vax-* \ + | we32k-* \ + | x86-* | x86_64-* | xc16x-* | xps100-* \ + | xstormy16-* | xtensa*-* \ + | ymp-* \ + | z8k-* | z80-*) + ;; + # Recognize the basic CPU types without company name, with glob match. + xtensa*) + basic_machine=$basic_machine-unknown + ;; + # Recognize the various machine names and aliases which stand + # for a CPU type and a company and sometimes even an OS. + 386bsd) + basic_machine=i386-unknown + os=-bsd + ;; + 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc) + basic_machine=m68000-att + ;; + 3b*) + basic_machine=we32k-att + ;; + a29khif) + basic_machine=a29k-amd + os=-udi + ;; + abacus) + basic_machine=abacus-unknown + ;; + adobe68k) + basic_machine=m68010-adobe + os=-scout + ;; + alliant | fx80) + basic_machine=fx80-alliant + ;; + altos | altos3068) + basic_machine=m68k-altos + ;; + am29k) + basic_machine=a29k-none + os=-bsd + ;; + amd64) + basic_machine=x86_64-pc + ;; + amd64-*) + basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + amdahl) + basic_machine=580-amdahl + os=-sysv + ;; + amiga | amiga-*) + basic_machine=m68k-unknown + ;; + amigaos | amigados) + basic_machine=m68k-unknown + os=-amigaos + ;; + amigaunix | amix) + basic_machine=m68k-unknown + os=-sysv4 + ;; + apollo68) + basic_machine=m68k-apollo + os=-sysv + ;; + apollo68bsd) + basic_machine=m68k-apollo + os=-bsd + ;; + aros) + basic_machine=i386-pc + os=-aros + ;; + aux) + basic_machine=m68k-apple + os=-aux + ;; + balance) + basic_machine=ns32k-sequent + os=-dynix + ;; + blackfin) + basic_machine=bfin-unknown + os=-linux + ;; + blackfin-*) + basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'` + os=-linux + ;; + bluegene*) + basic_machine=powerpc-ibm + os=-cnk + ;; + c54x-*) + basic_machine=tic54x-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + c55x-*) + basic_machine=tic55x-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + c6x-*) + basic_machine=tic6x-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + c90) + basic_machine=c90-cray + os=-unicos + ;; + cegcc) + basic_machine=arm-unknown + os=-cegcc + ;; + convex-c1) + basic_machine=c1-convex + os=-bsd + ;; + convex-c2) + basic_machine=c2-convex + os=-bsd + ;; + convex-c32) + basic_machine=c32-convex + os=-bsd + ;; + convex-c34) + basic_machine=c34-convex + os=-bsd + ;; + convex-c38) + basic_machine=c38-convex + os=-bsd + ;; + cray | j90) + basic_machine=j90-cray + os=-unicos + ;; + craynv) + basic_machine=craynv-cray + os=-unicosmp + ;; + cr16 | cr16-*) + basic_machine=cr16-unknown + os=-elf + ;; + crds | unos) + basic_machine=m68k-crds + ;; + crisv32 | crisv32-* | etraxfs*) + basic_machine=crisv32-axis + ;; + cris | cris-* | etrax*) + basic_machine=cris-axis + ;; + crx) + basic_machine=crx-unknown + os=-elf + ;; + da30 | da30-*) + basic_machine=m68k-da30 + ;; + decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn) + basic_machine=mips-dec + ;; + decsystem10* | dec10*) + basic_machine=pdp10-dec + os=-tops10 + ;; + decsystem20* | dec20*) + basic_machine=pdp10-dec + os=-tops20 + ;; + delta | 3300 | motorola-3300 | motorola-delta \ + | 3300-motorola | delta-motorola) + basic_machine=m68k-motorola + ;; + delta88) + basic_machine=m88k-motorola + os=-sysv3 + ;; + dicos) + basic_machine=i686-pc + os=-dicos + ;; + djgpp) + basic_machine=i586-pc + os=-msdosdjgpp + ;; + dpx20 | dpx20-*) + basic_machine=rs6000-bull + os=-bosx + ;; + dpx2* | dpx2*-bull) + basic_machine=m68k-bull + os=-sysv3 + ;; + ebmon29k) + basic_machine=a29k-amd + os=-ebmon + ;; + elxsi) + basic_machine=elxsi-elxsi + os=-bsd + ;; + encore | umax | mmax) + basic_machine=ns32k-encore + ;; + es1800 | OSE68k | ose68k | ose | OSE) + basic_machine=m68k-ericsson + os=-ose + ;; + fx2800) + basic_machine=i860-alliant + ;; + genix) + basic_machine=ns32k-ns + ;; + gmicro) + basic_machine=tron-gmicro + os=-sysv + ;; + go32) + basic_machine=i386-pc + os=-go32 + ;; + h3050r* | hiux*) + basic_machine=hppa1.1-hitachi + os=-hiuxwe2 + ;; + h8300hms) + basic_machine=h8300-hitachi + os=-hms + ;; + h8300xray) + basic_machine=h8300-hitachi + os=-xray + ;; + h8500hms) + basic_machine=h8500-hitachi + os=-hms + ;; + harris) + basic_machine=m88k-harris + os=-sysv3 + ;; + hp300-*) + basic_machine=m68k-hp + ;; + hp300bsd) + basic_machine=m68k-hp + os=-bsd + ;; + hp300hpux) + basic_machine=m68k-hp + os=-hpux + ;; + hp3k9[0-9][0-9] | hp9[0-9][0-9]) + basic_machine=hppa1.0-hp + ;; + hp9k2[0-9][0-9] | hp9k31[0-9]) + basic_machine=m68000-hp + ;; + hp9k3[2-9][0-9]) + basic_machine=m68k-hp + ;; + hp9k6[0-9][0-9] | hp6[0-9][0-9]) + basic_machine=hppa1.0-hp + ;; + hp9k7[0-79][0-9] | hp7[0-79][0-9]) + basic_machine=hppa1.1-hp + ;; + hp9k78[0-9] | hp78[0-9]) + # FIXME: really hppa2.0-hp + basic_machine=hppa1.1-hp + ;; + hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893) + # FIXME: really hppa2.0-hp + basic_machine=hppa1.1-hp + ;; + hp9k8[0-9][13679] | hp8[0-9][13679]) + basic_machine=hppa1.1-hp + ;; + hp9k8[0-9][0-9] | hp8[0-9][0-9]) + basic_machine=hppa1.0-hp + ;; + hppa-next) + os=-nextstep3 + ;; + hppaosf) + basic_machine=hppa1.1-hp + os=-osf + ;; + hppro) + basic_machine=hppa1.1-hp + os=-proelf + ;; + i370-ibm* | ibm*) + basic_machine=i370-ibm + ;; +# I'm not sure what "Sysv32" means. Should this be sysv3.2? + i*86v32) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-sysv32 + ;; + i*86v4*) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-sysv4 + ;; + i*86v) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-sysv + ;; + i*86sol2) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-solaris2 + ;; + i386mach) + basic_machine=i386-mach + os=-mach + ;; + i386-vsta | vsta) + basic_machine=i386-unknown + os=-vsta + ;; + iris | iris4d) + basic_machine=mips-sgi + case $os in + -irix*) + ;; + *) + os=-irix4 + ;; + esac + ;; + isi68 | isi) + basic_machine=m68k-isi + os=-sysv + ;; + m68knommu) + basic_machine=m68k-unknown + os=-linux + ;; + m68knommu-*) + basic_machine=m68k-`echo $basic_machine | sed 's/^[^-]*-//'` + os=-linux + ;; + m88k-omron*) + basic_machine=m88k-omron + ;; + magnum | m3230) + basic_machine=mips-mips + os=-sysv + ;; + merlin) + basic_machine=ns32k-utek + os=-sysv + ;; + microblaze) + basic_machine=microblaze-xilinx + ;; + mingw32) + basic_machine=i386-pc + os=-mingw32 + ;; + mingw32ce) + basic_machine=arm-unknown + os=-mingw32ce + ;; + miniframe) + basic_machine=m68000-convergent + ;; + *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*) + basic_machine=m68k-atari + os=-mint + ;; + mips3*-*) + basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'` + ;; + mips3*) + basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown + ;; + monitor) + basic_machine=m68k-rom68k + os=-coff + ;; + morphos) + basic_machine=powerpc-unknown + os=-morphos + ;; + msdos) + basic_machine=i386-pc + os=-msdos + ;; + ms1-*) + basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'` + ;; + mvs) + basic_machine=i370-ibm + os=-mvs + ;; + ncr3000) + basic_machine=i486-ncr + os=-sysv4 + ;; + netbsd386) + basic_machine=i386-unknown + os=-netbsd + ;; + netwinder) + basic_machine=armv4l-rebel + os=-linux + ;; + news | news700 | news800 | news900) + basic_machine=m68k-sony + os=-newsos + ;; + news1000) + basic_machine=m68030-sony + os=-newsos + ;; + news-3600 | risc-news) + basic_machine=mips-sony + os=-newsos + ;; + necv70) + basic_machine=v70-nec + os=-sysv + ;; + next | m*-next ) + basic_machine=m68k-next + case $os in + -nextstep* ) + ;; + -ns2*) + os=-nextstep2 + ;; + *) + os=-nextstep3 + ;; + esac + ;; + nh3000) + basic_machine=m68k-harris + os=-cxux + ;; + nh[45]000) + basic_machine=m88k-harris + os=-cxux + ;; + nindy960) + basic_machine=i960-intel + os=-nindy + ;; + mon960) + basic_machine=i960-intel + os=-mon960 + ;; + nonstopux) + basic_machine=mips-compaq + os=-nonstopux + ;; + np1) + basic_machine=np1-gould + ;; + neo-tandem) + basic_machine=neo-tandem + ;; + nse-tandem) + basic_machine=nse-tandem + ;; + nsr-tandem) + basic_machine=nsr-tandem + ;; + op50n-* | op60c-*) + basic_machine=hppa1.1-oki + os=-proelf + ;; + openrisc | openrisc-*) + basic_machine=or32-unknown + ;; + os400) + basic_machine=powerpc-ibm + os=-os400 + ;; + OSE68000 | ose68000) + basic_machine=m68000-ericsson + os=-ose + ;; + os68k) + basic_machine=m68k-none + os=-os68k + ;; + pa-hitachi) + basic_machine=hppa1.1-hitachi + os=-hiuxwe2 + ;; + paragon) + basic_machine=i860-intel + os=-osf + ;; + parisc) + basic_machine=hppa-unknown + os=-linux + ;; + parisc-*) + basic_machine=hppa-`echo $basic_machine | sed 's/^[^-]*-//'` + os=-linux + ;; + pbd) + basic_machine=sparc-tti + ;; + pbb) + basic_machine=m68k-tti + ;; + pc532 | pc532-*) + basic_machine=ns32k-pc532 + ;; + pc98) + basic_machine=i386-pc + ;; + pc98-*) + basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentium | p5 | k5 | k6 | nexgen | viac3) + basic_machine=i586-pc + ;; + pentiumpro | p6 | 6x86 | athlon | athlon_*) + basic_machine=i686-pc + ;; + pentiumii | pentium2 | pentiumiii | pentium3) + basic_machine=i686-pc + ;; + pentium4) + basic_machine=i786-pc + ;; + pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*) + basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentiumpro-* | p6-* | 6x86-* | athlon-*) + basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*) + basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentium4-*) + basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pn) + basic_machine=pn-gould + ;; + power) basic_machine=power-ibm + ;; + ppc | ppcbe) basic_machine=powerpc-unknown + ;; + ppc-* | ppcbe-*) + basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ppcle | powerpclittle | ppc-le | powerpc-little) + basic_machine=powerpcle-unknown + ;; + ppcle-* | powerpclittle-*) + basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ppc64) basic_machine=powerpc64-unknown + ;; + ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ppc64le | powerpc64little | ppc64-le | powerpc64-little) + basic_machine=powerpc64le-unknown + ;; + ppc64le-* | powerpc64little-*) + basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ps2) + basic_machine=i386-ibm + ;; + pw32) + basic_machine=i586-unknown + os=-pw32 + ;; + rdos) + basic_machine=i386-pc + os=-rdos + ;; + rom68k) + basic_machine=m68k-rom68k + os=-coff + ;; + rm[46]00) + basic_machine=mips-siemens + ;; + rtpc | rtpc-*) + basic_machine=romp-ibm + ;; + s390 | s390-*) + basic_machine=s390-ibm + ;; + s390x | s390x-*) + basic_machine=s390x-ibm + ;; + sa29200) + basic_machine=a29k-amd + os=-udi + ;; + sb1) + basic_machine=mipsisa64sb1-unknown + ;; + sb1el) + basic_machine=mipsisa64sb1el-unknown + ;; + sde) + basic_machine=mipsisa32-sde + os=-elf + ;; + sei) + basic_machine=mips-sei + os=-seiux + ;; + sequent) + basic_machine=i386-sequent + ;; + sh) + basic_machine=sh-hitachi + os=-hms + ;; + sh5el) + basic_machine=sh5le-unknown + ;; + sh64) + basic_machine=sh64-unknown + ;; + sparclite-wrs | simso-wrs) + basic_machine=sparclite-wrs + os=-vxworks + ;; + sps7) + basic_machine=m68k-bull + os=-sysv2 + ;; + spur) + basic_machine=spur-unknown + ;; + st2000) + basic_machine=m68k-tandem + ;; + stratus) + basic_machine=i860-stratus + os=-sysv4 + ;; + strongarm-* | thumb-*) + basic_machine=arm-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + sun2) + basic_machine=m68000-sun + ;; + sun2os3) + basic_machine=m68000-sun + os=-sunos3 + ;; + sun2os4) + basic_machine=m68000-sun + os=-sunos4 + ;; + sun3os3) + basic_machine=m68k-sun + os=-sunos3 + ;; + sun3os4) + basic_machine=m68k-sun + os=-sunos4 + ;; + sun4os3) + basic_machine=sparc-sun + os=-sunos3 + ;; + sun4os4) + basic_machine=sparc-sun + os=-sunos4 + ;; + sun4sol2) + basic_machine=sparc-sun + os=-solaris2 + ;; + sun3 | sun3-*) + basic_machine=m68k-sun + ;; + sun4) + basic_machine=sparc-sun + ;; + sun386 | sun386i | roadrunner) + basic_machine=i386-sun + ;; + sv1) + basic_machine=sv1-cray + os=-unicos + ;; + symmetry) + basic_machine=i386-sequent + os=-dynix + ;; + t3e) + basic_machine=alphaev5-cray + os=-unicos + ;; + t90) + basic_machine=t90-cray + os=-unicos + ;; + # This must be matched before tile*. + tilegx*) + basic_machine=tilegx-unknown + os=-linux-gnu + ;; + tile*) + basic_machine=tile-unknown + os=-linux-gnu + ;; + tx39) + basic_machine=mipstx39-unknown + ;; + tx39el) + basic_machine=mipstx39el-unknown + ;; + toad1) + basic_machine=pdp10-xkl + os=-tops20 + ;; + tower | tower-32) + basic_machine=m68k-ncr + ;; + tpf) + basic_machine=s390x-ibm + os=-tpf + ;; + udi29k) + basic_machine=a29k-amd + os=-udi + ;; + ultra3) + basic_machine=a29k-nyu + os=-sym1 + ;; + v810 | necv810) + basic_machine=v810-nec + os=-none + ;; + vaxv) + basic_machine=vax-dec + os=-sysv + ;; + vms) + basic_machine=vax-dec + os=-vms + ;; + vpp*|vx|vx-*) + basic_machine=f301-fujitsu + ;; + vxworks960) + basic_machine=i960-wrs + os=-vxworks + ;; + vxworks68) + basic_machine=m68k-wrs + os=-vxworks + ;; + vxworks29k) + basic_machine=a29k-wrs + os=-vxworks + ;; + w65*) + basic_machine=w65-wdc + os=-none + ;; + w89k-*) + basic_machine=hppa1.1-winbond + os=-proelf + ;; + xbox) + basic_machine=i686-pc + os=-mingw32 + ;; + xps | xps100) + basic_machine=xps100-honeywell + ;; + xscale-* | xscalee[bl]-*) + basic_machine=`echo $basic_machine | sed 's/^xscale/arm/'` + ;; + ymp) + basic_machine=ymp-cray + os=-unicos + ;; + z8k-*-coff) + basic_machine=z8k-unknown + os=-sim + ;; + z80-*-coff) + basic_machine=z80-unknown + os=-sim + ;; + none) + basic_machine=none-none + os=-none + ;; + +# Here we handle the default manufacturer of certain CPU types. It is in +# some cases the only manufacturer, in others, it is the most popular. + w89k) + basic_machine=hppa1.1-winbond + ;; + op50n) + basic_machine=hppa1.1-oki + ;; + op60c) + basic_machine=hppa1.1-oki + ;; + romp) + basic_machine=romp-ibm + ;; + mmix) + basic_machine=mmix-knuth + ;; + rs6000) + basic_machine=rs6000-ibm + ;; + vax) + basic_machine=vax-dec + ;; + pdp10) + # there are many clones, so DEC is not a safe bet + basic_machine=pdp10-unknown + ;; + pdp11) + basic_machine=pdp11-dec + ;; + we32k) + basic_machine=we32k-att + ;; + sh[1234] | sh[24]a | sh[24]aeb | sh[34]eb | sh[1234]le | sh[23]ele) + basic_machine=sh-unknown + ;; + sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v) + basic_machine=sparc-sun + ;; + cydra) + basic_machine=cydra-cydrome + ;; + orion) + basic_machine=orion-highlevel + ;; + orion105) + basic_machine=clipper-highlevel + ;; + mac | mpw | mac-mpw) + basic_machine=m68k-apple + ;; + pmac | pmac-mpw) + basic_machine=powerpc-apple + ;; + *-unknown) + # Make sure to match an already-canonicalized machine name. + ;; + *) + echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 + exit 1 + ;; +esac + +# Here we canonicalize certain aliases for manufacturers. +case $basic_machine in + *-digital*) + basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'` + ;; + *-commodore*) + basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'` + ;; + *) + ;; +esac + +# Decode manufacturer-specific aliases for certain operating systems. + +if [ x"$os" != x"" ] +then +case $os in + # First match some system type aliases + # that might get confused with valid system types. + # -solaris* is a basic system type, with this one exception. + -auroraux) + os=-auroraux + ;; + -solaris1 | -solaris1.*) + os=`echo $os | sed -e 's|solaris1|sunos4|'` + ;; + -solaris) + os=-solaris2 + ;; + -svr4*) + os=-sysv4 + ;; + -unixware*) + os=-sysv4.2uw + ;; + -gnu/linux*) + os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'` + ;; + # First accept the basic system types. + # The portable systems comes first. + # Each alternative MUST END IN A *, to match a version number. + # -sysv* is not here because it comes later, after sysvr4. + -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \ + | -*vms* | -sco* | -esix* | -isc* | -aix* | -cnk* | -sunos | -sunos[34]*\ + | -hpux* | -unos* | -osf* | -luna* | -dgux* | -auroraux* | -solaris* \ + | -sym* | -kopensolaris* \ + | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \ + | -aos* | -aros* \ + | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \ + | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \ + | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \ + | -openbsd* | -solidbsd* \ + | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \ + | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \ + | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \ + | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \ + | -chorusos* | -chorusrdb* | -cegcc* \ + | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \ + | -mingw32* | -linux-gnu* | -linux-android* \ + | -linux-newlib* | -linux-uclibc* \ + | -uxpv* | -beos* | -mpeix* | -udk* \ + | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \ + | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \ + | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \ + | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \ + | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \ + | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \ + | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -es*) + # Remember, each alternative MUST END IN *, to match a version number. + ;; + -qnx*) + case $basic_machine in + x86-* | i*86-*) + ;; + *) + os=-nto$os + ;; + esac + ;; + -nto-qnx*) + ;; + -nto*) + os=`echo $os | sed -e 's|nto|nto-qnx|'` + ;; + -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \ + | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \ + | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*) + ;; + -mac*) + os=`echo $os | sed -e 's|mac|macos|'` + ;; + -linux-dietlibc) + os=-linux-dietlibc + ;; + -linux*) + os=`echo $os | sed -e 's|linux|linux-gnu|'` + ;; + -sunos5*) + os=`echo $os | sed -e 's|sunos5|solaris2|'` + ;; + -sunos6*) + os=`echo $os | sed -e 's|sunos6|solaris3|'` + ;; + -opened*) + os=-openedition + ;; + -os400*) + os=-os400 + ;; + -wince*) + os=-wince + ;; + -osfrose*) + os=-osfrose + ;; + -osf*) + os=-osf + ;; + -utek*) + os=-bsd + ;; + -dynix*) + os=-bsd + ;; + -acis*) + os=-aos + ;; + -atheos*) + os=-atheos + ;; + -syllable*) + os=-syllable + ;; + -386bsd) + os=-bsd + ;; + -ctix* | -uts*) + os=-sysv + ;; + -nova*) + os=-rtmk-nova + ;; + -ns2 ) + os=-nextstep2 + ;; + -nsk*) + os=-nsk + ;; + # Preserve the version number of sinix5. + -sinix5.*) + os=`echo $os | sed -e 's|sinix|sysv|'` + ;; + -sinix*) + os=-sysv4 + ;; + -tpf*) + os=-tpf + ;; + -triton*) + os=-sysv3 + ;; + -oss*) + os=-sysv3 + ;; + -svr4) + os=-sysv4 + ;; + -svr3) + os=-sysv3 + ;; + -sysvr4) + os=-sysv4 + ;; + # This must come after -sysvr4. + -sysv*) + ;; + -ose*) + os=-ose + ;; + -es1800*) + os=-ose + ;; + -xenix) + os=-xenix + ;; + -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) + os=-mint + ;; + -aros*) + os=-aros + ;; + -kaos*) + os=-kaos + ;; + -zvmoe) + os=-zvmoe + ;; + -dicos*) + os=-dicos + ;; + -nacl*) + ;; + -none) + ;; + *) + # Get rid of the `-' at the beginning of $os. + os=`echo $os | sed 's/[^-]*-//'` + echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2 + exit 1 + ;; +esac +else + +# Here we handle the default operating systems that come with various machines. +# The value should be what the vendor currently ships out the door with their +# machine or put another way, the most popular os provided with the machine. + +# Note that if you're going to try to match "-MANUFACTURER" here (say, +# "-sun"), then you have to tell the case statement up towards the top +# that MANUFACTURER isn't an operating system. Otherwise, code above +# will signal an error saying that MANUFACTURER isn't an operating +# system, and we'll never get to this point. + +case $basic_machine in + score-*) + os=-elf + ;; + spu-*) + os=-elf + ;; + *-acorn) + os=-riscix1.2 + ;; + arm*-rebel) + os=-linux + ;; + arm*-semi) + os=-aout + ;; + c4x-* | tic4x-*) + os=-coff + ;; + tic54x-*) + os=-coff + ;; + tic55x-*) + os=-coff + ;; + tic6x-*) + os=-coff + ;; + # This must come before the *-dec entry. + pdp10-*) + os=-tops20 + ;; + pdp11-*) + os=-none + ;; + *-dec | vax-*) + os=-ultrix4.2 + ;; + m68*-apollo) + os=-domain + ;; + i386-sun) + os=-sunos4.0.2 + ;; + m68000-sun) + os=-sunos3 + # This also exists in the configure program, but was not the + # default. + # os=-sunos4 + ;; + m68*-cisco) + os=-aout + ;; + mep-*) + os=-elf + ;; + mips*-cisco) + os=-elf + ;; + mips*-*) + os=-elf + ;; + or32-*) + os=-coff + ;; + *-tti) # must be before sparc entry or we get the wrong os. + os=-sysv3 + ;; + sparc-* | *-sun) + os=-sunos4.1.1 + ;; + *-be) + os=-beos + ;; + *-haiku) + os=-haiku + ;; + *-ibm) + os=-aix + ;; + *-knuth) + os=-mmixware + ;; + *-wec) + os=-proelf + ;; + *-winbond) + os=-proelf + ;; + *-oki) + os=-proelf + ;; + *-hp) + os=-hpux + ;; + *-hitachi) + os=-hiux + ;; + i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent) + os=-sysv + ;; + *-cbm) + os=-amigaos + ;; + *-dg) + os=-dgux + ;; + *-dolphin) + os=-sysv3 + ;; + m68k-ccur) + os=-rtu + ;; + m88k-omron*) + os=-luna + ;; + *-next ) + os=-nextstep + ;; + *-sequent) + os=-ptx + ;; + *-crds) + os=-unos + ;; + *-ns) + os=-genix + ;; + i370-*) + os=-mvs + ;; + *-next) + os=-nextstep3 + ;; + *-gould) + os=-sysv + ;; + *-highlevel) + os=-bsd + ;; + *-encore) + os=-bsd + ;; + *-sgi) + os=-irix + ;; + *-siemens) + os=-sysv4 + ;; + *-masscomp) + os=-rtu + ;; + f30[01]-fujitsu | f700-fujitsu) + os=-uxpv + ;; + *-rom68k) + os=-coff + ;; + *-*bug) + os=-coff + ;; + *-apple) + os=-macos + ;; + *-atari*) + os=-mint + ;; + *) + os=-none + ;; +esac +fi + +# Here we handle the case where we know the os, and the CPU type, but not the +# manufacturer. We pick the logical manufacturer. +vendor=unknown +case $basic_machine in + *-unknown) + case $os in + -riscix*) + vendor=acorn + ;; + -sunos*) + vendor=sun + ;; + -cnk*|-aix*) + vendor=ibm + ;; + -beos*) + vendor=be + ;; + -hpux*) + vendor=hp + ;; + -mpeix*) + vendor=hp + ;; + -hiux*) + vendor=hitachi + ;; + -unos*) + vendor=crds + ;; + -dgux*) + vendor=dg + ;; + -luna*) + vendor=omron + ;; + -genix*) + vendor=ns + ;; + -mvs* | -opened*) + vendor=ibm + ;; + -os400*) + vendor=ibm + ;; + -ptx*) + vendor=sequent + ;; + -tpf*) + vendor=ibm + ;; + -vxsim* | -vxworks* | -windiss*) + vendor=wrs + ;; + -aux*) + vendor=apple + ;; + -hms*) + vendor=hitachi + ;; + -mpw* | -macos*) + vendor=apple + ;; + -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) + vendor=atari + ;; + -vos*) + vendor=stratus + ;; + esac + basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"` + ;; +esac + +echo $basic_machine$os +exit + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "timestamp='" +# time-stamp-format: "%:y-%02m-%02d" +# time-stamp-end: "'" +# End: diff --git a/software/scsi2sd-util/libzipper-1.0.3/configure b/software/scsi2sd-util/libzipper-1.0.3/configure new file mode 100755 index 0000000..408a4af --- /dev/null +++ b/software/scsi2sd-util/libzipper-1.0.3/configure @@ -0,0 +1,20148 @@ +#! /bin/sh +# Guess values for system-dependent variables and create Makefiles. +# Generated by GNU Autoconf 2.68 for libzipper 1.0.3. +# +# Report bugs to . +# +# +# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, +# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software +# Foundation, Inc. +# +# +# This configure script is free software; the Free Software Foundation +# gives unlimited permission to copy, distribute and modify it. +## -------------------- ## +## M4sh Initialization. ## +## -------------------- ## + +# Be more Bourne compatible +DUALCASE=1; export DUALCASE # for MKS sh +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in #( + *posix*) : + set -o posix ;; #( + *) : + ;; +esac +fi + + +as_nl=' +' +export as_nl +# Printing a long string crashes Solaris 7 /usr/bin/printf. +as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo +# Prefer a ksh shell builtin over an external printf program on Solaris, +# but without wasting forks for bash or zsh. +if test -z "$BASH_VERSION$ZSH_VERSION" \ + && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='print -r --' + as_echo_n='print -rn --' +elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='printf %s\n' + as_echo_n='printf %s' +else + if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then + as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' + as_echo_n='/usr/ucb/echo -n' + else + as_echo_body='eval expr "X$1" : "X\\(.*\\)"' + as_echo_n_body='eval + arg=$1; + case $arg in #( + *"$as_nl"*) + expr "X$arg" : "X\\(.*\\)$as_nl"; + arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; + esac; + expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" + ' + export as_echo_n_body + as_echo_n='sh -c $as_echo_n_body as_echo' + fi + export as_echo_body + as_echo='sh -c $as_echo_body as_echo' +fi + +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + PATH_SEPARATOR=: + (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { + (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || + PATH_SEPARATOR=';' + } +fi + + +# IFS +# We need space, tab and new line, in precisely that order. Quoting is +# there to prevent editors from complaining about space-tab. +# (If _AS_PATH_WALK were called with IFS unset, it would disable word +# splitting by setting IFS to empty value.) +IFS=" "" $as_nl" + +# Find who we are. Look in the path if we contain no directory separator. +as_myself= +case $0 in #(( + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break + done +IFS=$as_save_IFS + + ;; +esac +# We did not find ourselves, most probably we were run as `sh COMMAND' +# in which case we are not to be found in the path. +if test "x$as_myself" = x; then + as_myself=$0 +fi +if test ! -f "$as_myself"; then + $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 + exit 1 +fi + +# Unset variables that we do not need and which cause bugs (e.g. in +# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" +# suppresses any "Segmentation fault" message there. '((' could +# trigger a bug in pdksh 5.2.14. +for as_var in BASH_ENV ENV MAIL MAILPATH +do eval test x\${$as_var+set} = xset \ + && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : +done +PS1='$ ' +PS2='> ' +PS4='+ ' + +# NLS nuisances. +LC_ALL=C +export LC_ALL +LANGUAGE=C +export LANGUAGE + +# CDPATH. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + +if test "x$CONFIG_SHELL" = x; then + as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then : + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which + # is contrary to our usage. Disable this feature. + alias -g '\${1+\"\$@\"}'='\"\$@\"' + setopt NO_GLOB_SUBST +else + case \`(set -o) 2>/dev/null\` in #( + *posix*) : + set -o posix ;; #( + *) : + ;; +esac +fi +" + as_required="as_fn_return () { (exit \$1); } +as_fn_success () { as_fn_return 0; } +as_fn_failure () { as_fn_return 1; } +as_fn_ret_success () { return 0; } +as_fn_ret_failure () { return 1; } + +exitcode=0 +as_fn_success || { exitcode=1; echo as_fn_success failed.; } +as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; } +as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; } +as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; } +if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then : + +else + exitcode=1; echo positional parameters were not saved. +fi +test x\$exitcode = x0 || exit 1" + as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO + as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO + eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" && + test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1 + + test -n \"\${ZSH_VERSION+set}\${BASH_VERSION+set}\" || ( + ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' + ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO + ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO + PATH=/empty FPATH=/empty; export PATH FPATH + test \"X\`printf %s \$ECHO\`\" = \"X\$ECHO\" \\ + || test \"X\`print -r -- \$ECHO\`\" = \"X\$ECHO\" ) || exit 1 +test \$(( 1 + 1 )) = 2 || exit 1" + if (eval "$as_required") 2>/dev/null; then : + as_have_required=yes +else + as_have_required=no +fi + if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then : + +else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +as_found=false +for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + as_found=: + case $as_dir in #( + /*) + for as_base in sh bash ksh sh5; do + # Try only shells that exist, to save several forks. + as_shell=$as_dir/$as_base + if { test -f "$as_shell" || test -f "$as_shell.exe"; } && + { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then : + CONFIG_SHELL=$as_shell as_have_required=yes + if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then : + break 2 +fi +fi + done;; + esac + as_found=false +done +$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } && + { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then : + CONFIG_SHELL=$SHELL as_have_required=yes +fi; } +IFS=$as_save_IFS + + + if test "x$CONFIG_SHELL" != x; then : + # We cannot yet assume a decent shell, so we have to provide a + # neutralization value for shells without unset; and this also + # works around shells that cannot unset nonexistent variables. + # Preserve -v and -x to the replacement shell. + BASH_ENV=/dev/null + ENV=/dev/null + (unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV + export CONFIG_SHELL + case $- in # (((( + *v*x* | *x*v* ) as_opts=-vx ;; + *v* ) as_opts=-v ;; + *x* ) as_opts=-x ;; + * ) as_opts= ;; + esac + exec "$CONFIG_SHELL" $as_opts "$as_myself" ${1+"$@"} +fi + + if test x$as_have_required = xno; then : + $as_echo "$0: This script requires a shell more modern than all" + $as_echo "$0: the shells that I found on your system." + if test x${ZSH_VERSION+set} = xset ; then + $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should" + $as_echo "$0: be upgraded to zsh 4.3.4 or later." + else + $as_echo "$0: Please tell bug-autoconf@gnu.org and +$0: michael@codesrc.com about your system, including any +$0: error possibly output before this message. Then install +$0: a modern shell, or manually run the script under such a +$0: shell if you do have one." + fi + exit 1 +fi +fi +fi +SHELL=${CONFIG_SHELL-/bin/sh} +export SHELL +# Unset more variables known to interfere with behavior of common tools. +CLICOLOR_FORCE= GREP_OPTIONS= +unset CLICOLOR_FORCE GREP_OPTIONS + +## --------------------- ## +## M4sh Shell Functions. ## +## --------------------- ## +# as_fn_unset VAR +# --------------- +# Portably unset VAR. +as_fn_unset () +{ + { eval $1=; unset $1;} +} +as_unset=as_fn_unset + +# as_fn_set_status STATUS +# ----------------------- +# Set $? to STATUS, without forking. +as_fn_set_status () +{ + return $1 +} # as_fn_set_status + +# as_fn_exit STATUS +# ----------------- +# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. +as_fn_exit () +{ + set +e + as_fn_set_status $1 + exit $1 +} # as_fn_exit + +# as_fn_mkdir_p +# ------------- +# Create "$as_dir" as a directory, including parents if necessary. +as_fn_mkdir_p () +{ + + case $as_dir in #( + -*) as_dir=./$as_dir;; + esac + test -d "$as_dir" || eval $as_mkdir_p || { + as_dirs= + while :; do + case $as_dir in #( + *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( + *) as_qdir=$as_dir;; + esac + as_dirs="'$as_qdir' $as_dirs" + as_dir=`$as_dirname -- "$as_dir" || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + test -d "$as_dir" && break + done + test -z "$as_dirs" || eval "mkdir $as_dirs" + } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" + + +} # as_fn_mkdir_p +# as_fn_append VAR VALUE +# ---------------------- +# Append the text in VALUE to the end of the definition contained in VAR. Take +# advantage of any shell optimizations that allow amortized linear growth over +# repeated appends, instead of the typical quadratic growth present in naive +# implementations. +if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : + eval 'as_fn_append () + { + eval $1+=\$2 + }' +else + as_fn_append () + { + eval $1=\$$1\$2 + } +fi # as_fn_append + +# as_fn_arith ARG... +# ------------------ +# Perform arithmetic evaluation on the ARGs, and store the result in the +# global $as_val. Take advantage of shells that can avoid forks. The arguments +# must be portable across $(()) and expr. +if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : + eval 'as_fn_arith () + { + as_val=$(( $* )) + }' +else + as_fn_arith () + { + as_val=`expr "$@" || test $? -eq 1` + } +fi # as_fn_arith + + +# as_fn_error STATUS ERROR [LINENO LOG_FD] +# ---------------------------------------- +# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are +# provided, also output the error to LOG_FD, referencing LINENO. Then exit the +# script with STATUS, using 1 if that was 0. +as_fn_error () +{ + as_status=$1; test $as_status -eq 0 && as_status=1 + if test "$4"; then + as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 + fi + $as_echo "$as_me: error: $2" >&2 + as_fn_exit $as_status +} # as_fn_error + +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr +else + as_expr=false +fi + +if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false +fi + +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then + as_dirname=dirname +else + as_dirname=false +fi + +as_me=`$as_basename -- "$0" || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ + s//\1/ + q + } + /^X\/\(\/\/\)$/{ + s//\1/ + q + } + /^X\/\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + + + as_lineno_1=$LINENO as_lineno_1a=$LINENO + as_lineno_2=$LINENO as_lineno_2a=$LINENO + eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" && + test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || { + # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-) + sed -n ' + p + /[$]LINENO/= + ' <$as_myself | + sed ' + s/[$]LINENO.*/&-/ + t lineno + b + :lineno + N + :loop + s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ + t loop + s/-\n.*// + ' >$as_me.lineno && + chmod +x "$as_me.lineno" || + { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; } + + # Don't try to exec as it changes $[0], causing all sort of problems + # (the dirname of $[0] is not the place where we might find the + # original and so on. Autoconf is especially sensitive to this). + . "./$as_me.lineno" + # Exit status is that of the last command. + exit +} + +ECHO_C= ECHO_N= ECHO_T= +case `echo -n x` in #((((( +-n*) + case `echo 'xy\c'` in + *c*) ECHO_T=' ';; # ECHO_T is single tab character. + xy) ECHO_C='\c';; + *) echo `echo ksh88 bug on AIX 6.1` > /dev/null + ECHO_T=' ';; + esac;; +*) + ECHO_N='-n';; +esac + +rm -f conf$$ conf$$.exe conf$$.file +if test -d conf$$.dir; then + rm -f conf$$.dir/conf$$.file +else + rm -f conf$$.dir + mkdir conf$$.dir 2>/dev/null +fi +if (echo >conf$$.file) 2>/dev/null; then + if ln -s conf$$.file conf$$ 2>/dev/null; then + as_ln_s='ln -s' + # ... but there are two gotchas: + # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. + # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. + # In both cases, we have to default to `cp -p'. + ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || + as_ln_s='cp -p' + elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln + else + as_ln_s='cp -p' + fi +else + as_ln_s='cp -p' +fi +rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file +rmdir conf$$.dir 2>/dev/null + +if mkdir -p . 2>/dev/null; then + as_mkdir_p='mkdir -p "$as_dir"' +else + test -d ./-p && rmdir ./-p + as_mkdir_p=false +fi + +if test -x / >/dev/null 2>&1; then + as_test_x='test -x' +else + if ls -dL / >/dev/null 2>&1; then + as_ls_L_option=L + else + as_ls_L_option= + fi + as_test_x=' + eval sh -c '\'' + if test -d "$1"; then + test -d "$1/."; + else + case $1 in #( + -*)set "./$1";; + esac; + case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #(( + ???[sx]*):;;*)false;;esac;fi + '\'' sh + ' +fi +as_executable_p=$as_test_x + +# Sed expression to map a string onto a valid CPP name. +as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" + +# Sed expression to map a string onto a valid variable name. +as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" + +SHELL=${CONFIG_SHELL-/bin/sh} + + +test -n "$DJDIR" || exec 7<&0 &1 + +# Name of the host. +# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status, +# so uname gets run too. +ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` + +# +# Initializations. +# +ac_default_prefix=/usr/local +ac_clean_files= +ac_config_libobj_dir=. +LIBOBJS= +cross_compiling=no +subdirs= +MFLAGS= +MAKEFLAGS= + +# Identity of this package. +PACKAGE_NAME='libzipper' +PACKAGE_TARNAME='libzipper' +PACKAGE_VERSION='1.0.3' +PACKAGE_STRING='libzipper 1.0.3' +PACKAGE_BUGREPORT='michael@codesrc.com' +PACKAGE_URL='' + +# Factoring default headers for most tests. +ac_includes_default="\ +#include +#ifdef HAVE_SYS_TYPES_H +# include +#endif +#ifdef HAVE_SYS_STAT_H +# include +#endif +#ifdef STDC_HEADERS +# include +# include +#else +# ifdef HAVE_STDLIB_H +# include +# endif +#endif +#ifdef HAVE_STRING_H +# if !defined STDC_HEADERS && defined HAVE_MEMORY_H +# include +# endif +# include +#endif +#ifdef HAVE_STRINGS_H +# include +#endif +#ifdef HAVE_INTTYPES_H +# include +#endif +#ifdef HAVE_STDINT_H +# include +#endif +#ifdef HAVE_UNISTD_H +# include +#endif" + +ac_subst_vars='am__EXEEXT_FALSE +am__EXEEXT_TRUE +LTLIBOBJS +LIBOBJS +ZLIB_LIBS +ZLIB_CFLAGS +PKG_CONFIG_LIBDIR +PKG_CONFIG_PATH +PKG_CONFIG +DOXYGEN_PAPER_SIZE +DX_COND_latex_FALSE +DX_COND_latex_TRUE +DX_COND_pdf_FALSE +DX_COND_pdf_TRUE +DX_PDFLATEX +DX_FLAG_pdf +DX_COND_ps_FALSE +DX_COND_ps_TRUE +DX_EGREP +DX_DVIPS +DX_MAKEINDEX +DX_LATEX +DX_FLAG_ps +DX_COND_html_FALSE +DX_COND_html_TRUE +DX_FLAG_html +DX_COND_chi_FALSE +DX_COND_chi_TRUE +DX_FLAG_chi +DX_COND_chm_FALSE +DX_COND_chm_TRUE +DX_HHC +DX_FLAG_chm +DX_COND_xml_FALSE +DX_COND_xml_TRUE +DX_FLAG_xml +DX_COND_rtf_FALSE +DX_COND_rtf_TRUE +DX_FLAG_rtf +DX_COND_man_FALSE +DX_COND_man_TRUE +DX_FLAG_man +DX_COND_dot_FALSE +DX_COND_dot_TRUE +DX_DOT +DX_FLAG_dot +DX_COND_doc_FALSE +DX_COND_doc_TRUE +DX_PERL +DX_DOXYGEN +DX_FLAG_doc +DX_ENV +DX_DOCDIR +DX_CONFIG +DX_PROJECT +HAVE_GNU_STRERROR_FALSE +HAVE_GNU_STRERROR_TRUE +CXXCPP +CPP +OTOOL64 +OTOOL +LIPO +NMEDIT +DSYMUTIL +MANIFEST_TOOL +RANLIB +ac_ct_AR +AR +DLLTOOL +OBJDUMP +LN_S +NM +ac_ct_DUMPBIN +DUMPBIN +LD +FGREP +EGREP +GREP +SED +am__fastdepCC_FALSE +am__fastdepCC_TRUE +CCDEPMODE +ac_ct_CC +CFLAGS +CC +LIBTOOL +am__fastdepCXX_FALSE +am__fastdepCXX_TRUE +CXXDEPMODE +AMDEPBACKSLASH +AMDEP_FALSE +AMDEP_TRUE +am__quote +am__include +DEPDIR +OBJEXT +EXEEXT +ac_ct_CXX +CPPFLAGS +LDFLAGS +CXXFLAGS +CXX +libzipper_version +MAINT +MAINTAINER_MODE_FALSE +MAINTAINER_MODE_TRUE +am__untar +am__tar +AMTAR +am__leading_dot +SET_MAKE +AWK +mkdir_p +MKDIR_P +INSTALL_STRIP_PROGRAM +STRIP +install_sh +MAKEINFO +AUTOHEADER +AUTOMAKE +AUTOCONF +ACLOCAL +VERSION +PACKAGE +CYGPATH_W +am__isrc +INSTALL_DATA +INSTALL_SCRIPT +INSTALL_PROGRAM +target_os +target_vendor +target_cpu +target +host_os +host_vendor +host_cpu +host +build_os +build_vendor +build_cpu +build +target_alias +host_alias +build_alias +LIBS +ECHO_T +ECHO_N +ECHO_C +DEFS +mandir +localedir +libdir +psdir +pdfdir +dvidir +htmldir +infodir +docdir +oldincludedir +includedir +localstatedir +sharedstatedir +sysconfdir +datadir +datarootdir +libexecdir +sbindir +bindir +program_transform_name +prefix +exec_prefix +PACKAGE_URL +PACKAGE_BUGREPORT +PACKAGE_STRING +PACKAGE_VERSION +PACKAGE_TARNAME +PACKAGE_NAME +PATH_SEPARATOR +SHELL' +ac_subst_files='' +ac_user_opts=' +enable_option_checking +enable_maintainer_mode +enable_dependency_tracking +enable_shared +enable_static +with_pic +enable_fast_install +with_gnu_ld +with_sysroot +enable_libtool_lock +enable_doxygen_doc +enable_doxygen_dot +enable_doxygen_man +enable_doxygen_rtf +enable_doxygen_xml +enable_doxygen_chm +enable_doxygen_chi +enable_doxygen_html +enable_doxygen_ps +enable_doxygen_pdf +' + ac_precious_vars='build_alias +host_alias +target_alias +CXX +CXXFLAGS +LDFLAGS +LIBS +CPPFLAGS +CCC +CC +CFLAGS +CPP +CXXCPP +DOXYGEN_PAPER_SIZE +PKG_CONFIG +PKG_CONFIG_PATH +PKG_CONFIG_LIBDIR +ZLIB_CFLAGS +ZLIB_LIBS' + + +# Initialize some variables set by options. +ac_init_help= +ac_init_version=false +ac_unrecognized_opts= +ac_unrecognized_sep= +# The variables have the same names as the options, with +# dashes changed to underlines. +cache_file=/dev/null +exec_prefix=NONE +no_create= +no_recursion= +prefix=NONE +program_prefix=NONE +program_suffix=NONE +program_transform_name=s,x,x, +silent= +site= +srcdir= +verbose= +x_includes=NONE +x_libraries=NONE + +# Installation directory options. +# These are left unexpanded so users can "make install exec_prefix=/foo" +# and all the variables that are supposed to be based on exec_prefix +# by default will actually change. +# Use braces instead of parens because sh, perl, etc. also accept them. +# (The list follows the same order as the GNU Coding Standards.) +bindir='${exec_prefix}/bin' +sbindir='${exec_prefix}/sbin' +libexecdir='${exec_prefix}/libexec' +datarootdir='${prefix}/share' +datadir='${datarootdir}' +sysconfdir='${prefix}/etc' +sharedstatedir='${prefix}/com' +localstatedir='${prefix}/var' +includedir='${prefix}/include' +oldincludedir='/usr/include' +docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' +infodir='${datarootdir}/info' +htmldir='${docdir}' +dvidir='${docdir}' +pdfdir='${docdir}' +psdir='${docdir}' +libdir='${exec_prefix}/lib' +localedir='${datarootdir}/locale' +mandir='${datarootdir}/man' + +ac_prev= +ac_dashdash= +for ac_option +do + # If the previous option needs an argument, assign it. + if test -n "$ac_prev"; then + eval $ac_prev=\$ac_option + ac_prev= + continue + fi + + case $ac_option in + *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; + *=) ac_optarg= ;; + *) ac_optarg=yes ;; + esac + + # Accept the important Cygnus configure options, so we can diagnose typos. + + case $ac_dashdash$ac_option in + --) + ac_dashdash=yes ;; + + -bindir | --bindir | --bindi | --bind | --bin | --bi) + ac_prev=bindir ;; + -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) + bindir=$ac_optarg ;; + + -build | --build | --buil | --bui | --bu) + ac_prev=build_alias ;; + -build=* | --build=* | --buil=* | --bui=* | --bu=*) + build_alias=$ac_optarg ;; + + -cache-file | --cache-file | --cache-fil | --cache-fi \ + | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) + ac_prev=cache_file ;; + -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ + | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) + cache_file=$ac_optarg ;; + + --config-cache | -C) + cache_file=config.cache ;; + + -datadir | --datadir | --datadi | --datad) + ac_prev=datadir ;; + -datadir=* | --datadir=* | --datadi=* | --datad=*) + datadir=$ac_optarg ;; + + -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ + | --dataroo | --dataro | --datar) + ac_prev=datarootdir ;; + -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ + | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) + datarootdir=$ac_optarg ;; + + -disable-* | --disable-*) + ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid feature name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"enable_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval enable_$ac_useropt=no ;; + + -docdir | --docdir | --docdi | --doc | --do) + ac_prev=docdir ;; + -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) + docdir=$ac_optarg ;; + + -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) + ac_prev=dvidir ;; + -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) + dvidir=$ac_optarg ;; + + -enable-* | --enable-*) + ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid feature name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"enable_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval enable_$ac_useropt=\$ac_optarg ;; + + -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ + | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ + | --exec | --exe | --ex) + ac_prev=exec_prefix ;; + -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ + | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ + | --exec=* | --exe=* | --ex=*) + exec_prefix=$ac_optarg ;; + + -gas | --gas | --ga | --g) + # Obsolete; use --with-gas. + with_gas=yes ;; + + -help | --help | --hel | --he | -h) + ac_init_help=long ;; + -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) + ac_init_help=recursive ;; + -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) + ac_init_help=short ;; + + -host | --host | --hos | --ho) + ac_prev=host_alias ;; + -host=* | --host=* | --hos=* | --ho=*) + host_alias=$ac_optarg ;; + + -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) + ac_prev=htmldir ;; + -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ + | --ht=*) + htmldir=$ac_optarg ;; + + -includedir | --includedir | --includedi | --included | --include \ + | --includ | --inclu | --incl | --inc) + ac_prev=includedir ;; + -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ + | --includ=* | --inclu=* | --incl=* | --inc=*) + includedir=$ac_optarg ;; + + -infodir | --infodir | --infodi | --infod | --info | --inf) + ac_prev=infodir ;; + -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) + infodir=$ac_optarg ;; + + -libdir | --libdir | --libdi | --libd) + ac_prev=libdir ;; + -libdir=* | --libdir=* | --libdi=* | --libd=*) + libdir=$ac_optarg ;; + + -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ + | --libexe | --libex | --libe) + ac_prev=libexecdir ;; + -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ + | --libexe=* | --libex=* | --libe=*) + libexecdir=$ac_optarg ;; + + -localedir | --localedir | --localedi | --localed | --locale) + ac_prev=localedir ;; + -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) + localedir=$ac_optarg ;; + + -localstatedir | --localstatedir | --localstatedi | --localstated \ + | --localstate | --localstat | --localsta | --localst | --locals) + ac_prev=localstatedir ;; + -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ + | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) + localstatedir=$ac_optarg ;; + + -mandir | --mandir | --mandi | --mand | --man | --ma | --m) + ac_prev=mandir ;; + -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) + mandir=$ac_optarg ;; + + -nfp | --nfp | --nf) + # Obsolete; use --without-fp. + with_fp=no ;; + + -no-create | --no-create | --no-creat | --no-crea | --no-cre \ + | --no-cr | --no-c | -n) + no_create=yes ;; + + -no-recursion | --no-recursion | --no-recursio | --no-recursi \ + | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) + no_recursion=yes ;; + + -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ + | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ + | --oldin | --oldi | --old | --ol | --o) + ac_prev=oldincludedir ;; + -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ + | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ + | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) + oldincludedir=$ac_optarg ;; + + -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) + ac_prev=prefix ;; + -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) + prefix=$ac_optarg ;; + + -program-prefix | --program-prefix | --program-prefi | --program-pref \ + | --program-pre | --program-pr | --program-p) + ac_prev=program_prefix ;; + -program-prefix=* | --program-prefix=* | --program-prefi=* \ + | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) + program_prefix=$ac_optarg ;; + + -program-suffix | --program-suffix | --program-suffi | --program-suff \ + | --program-suf | --program-su | --program-s) + ac_prev=program_suffix ;; + -program-suffix=* | --program-suffix=* | --program-suffi=* \ + | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) + program_suffix=$ac_optarg ;; + + -program-transform-name | --program-transform-name \ + | --program-transform-nam | --program-transform-na \ + | --program-transform-n | --program-transform- \ + | --program-transform | --program-transfor \ + | --program-transfo | --program-transf \ + | --program-trans | --program-tran \ + | --progr-tra | --program-tr | --program-t) + ac_prev=program_transform_name ;; + -program-transform-name=* | --program-transform-name=* \ + | --program-transform-nam=* | --program-transform-na=* \ + | --program-transform-n=* | --program-transform-=* \ + | --program-transform=* | --program-transfor=* \ + | --program-transfo=* | --program-transf=* \ + | --program-trans=* | --program-tran=* \ + | --progr-tra=* | --program-tr=* | --program-t=*) + program_transform_name=$ac_optarg ;; + + -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) + ac_prev=pdfdir ;; + -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) + pdfdir=$ac_optarg ;; + + -psdir | --psdir | --psdi | --psd | --ps) + ac_prev=psdir ;; + -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) + psdir=$ac_optarg ;; + + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + silent=yes ;; + + -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) + ac_prev=sbindir ;; + -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ + | --sbi=* | --sb=*) + sbindir=$ac_optarg ;; + + -sharedstatedir | --sharedstatedir | --sharedstatedi \ + | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ + | --sharedst | --shareds | --shared | --share | --shar \ + | --sha | --sh) + ac_prev=sharedstatedir ;; + -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ + | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ + | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ + | --sha=* | --sh=*) + sharedstatedir=$ac_optarg ;; + + -site | --site | --sit) + ac_prev=site ;; + -site=* | --site=* | --sit=*) + site=$ac_optarg ;; + + -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) + ac_prev=srcdir ;; + -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) + srcdir=$ac_optarg ;; + + -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ + | --syscon | --sysco | --sysc | --sys | --sy) + ac_prev=sysconfdir ;; + -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ + | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) + sysconfdir=$ac_optarg ;; + + -target | --target | --targe | --targ | --tar | --ta | --t) + ac_prev=target_alias ;; + -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) + target_alias=$ac_optarg ;; + + -v | -verbose | --verbose | --verbos | --verbo | --verb) + verbose=yes ;; + + -version | --version | --versio | --versi | --vers | -V) + ac_init_version=: ;; + + -with-* | --with-*) + ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid package name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"with_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval with_$ac_useropt=\$ac_optarg ;; + + -without-* | --without-*) + ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid package name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"with_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval with_$ac_useropt=no ;; + + --x) + # Obsolete; use --with-x. + with_x=yes ;; + + -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ + | --x-incl | --x-inc | --x-in | --x-i) + ac_prev=x_includes ;; + -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ + | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) + x_includes=$ac_optarg ;; + + -x-libraries | --x-libraries | --x-librarie | --x-librari \ + | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) + ac_prev=x_libraries ;; + -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ + | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) + x_libraries=$ac_optarg ;; + + -*) as_fn_error $? "unrecognized option: \`$ac_option' +Try \`$0 --help' for more information" + ;; + + *=*) + ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` + # Reject names that are not valid shell variable names. + case $ac_envvar in #( + '' | [0-9]* | *[!_$as_cr_alnum]* ) + as_fn_error $? "invalid variable name: \`$ac_envvar'" ;; + esac + eval $ac_envvar=\$ac_optarg + export $ac_envvar ;; + + *) + # FIXME: should be removed in autoconf 3.0. + $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2 + expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && + $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2 + : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}" + ;; + + esac +done + +if test -n "$ac_prev"; then + ac_option=--`echo $ac_prev | sed 's/_/-/g'` + as_fn_error $? "missing argument to $ac_option" +fi + +if test -n "$ac_unrecognized_opts"; then + case $enable_option_checking in + no) ;; + fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;; + *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;; + esac +fi + +# Check all directory arguments for consistency. +for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ + datadir sysconfdir sharedstatedir localstatedir includedir \ + oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ + libdir localedir mandir +do + eval ac_val=\$$ac_var + # Remove trailing slashes. + case $ac_val in + */ ) + ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'` + eval $ac_var=\$ac_val;; + esac + # Be sure to have absolute directory names. + case $ac_val in + [\\/$]* | ?:[\\/]* ) continue;; + NONE | '' ) case $ac_var in *prefix ) continue;; esac;; + esac + as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val" +done + +# There might be people who depend on the old broken behavior: `$host' +# used to hold the argument of --host etc. +# FIXME: To remove some day. +build=$build_alias +host=$host_alias +target=$target_alias + +# FIXME: To remove some day. +if test "x$host_alias" != x; then + if test "x$build_alias" = x; then + cross_compiling=maybe + $as_echo "$as_me: WARNING: if you wanted to set the --build type, don't use --host. + If a cross compiler is detected then cross compile mode will be used" >&2 + elif test "x$build_alias" != "x$host_alias"; then + cross_compiling=yes + fi +fi + +ac_tool_prefix= +test -n "$host_alias" && ac_tool_prefix=$host_alias- + +test "$silent" = yes && exec 6>/dev/null + + +ac_pwd=`pwd` && test -n "$ac_pwd" && +ac_ls_di=`ls -di .` && +ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || + as_fn_error $? "working directory cannot be determined" +test "X$ac_ls_di" = "X$ac_pwd_ls_di" || + as_fn_error $? "pwd does not report name of working directory" + + +# Find the source files, if location was not specified. +if test -z "$srcdir"; then + ac_srcdir_defaulted=yes + # Try the directory containing this script, then the parent directory. + ac_confdir=`$as_dirname -- "$as_myself" || +$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_myself" : 'X\(//\)[^/]' \| \ + X"$as_myself" : 'X\(//\)$' \| \ + X"$as_myself" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_myself" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + srcdir=$ac_confdir + if test ! -r "$srcdir/$ac_unique_file"; then + srcdir=.. + fi +else + ac_srcdir_defaulted=no +fi +if test ! -r "$srcdir/$ac_unique_file"; then + test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." + as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir" +fi +ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" +ac_abs_confdir=`( + cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg" + pwd)` +# When building in place, set srcdir=. +if test "$ac_abs_confdir" = "$ac_pwd"; then + srcdir=. +fi +# Remove unnecessary trailing slashes from srcdir. +# Double slashes in file names in object file debugging info +# mess up M-x gdb in Emacs. +case $srcdir in +*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; +esac +for ac_var in $ac_precious_vars; do + eval ac_env_${ac_var}_set=\${${ac_var}+set} + eval ac_env_${ac_var}_value=\$${ac_var} + eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} + eval ac_cv_env_${ac_var}_value=\$${ac_var} +done + +# +# Report the --help message. +# +if test "$ac_init_help" = "long"; then + # Omit some internal or obsolete options to make the list less imposing. + # This message is too long to be a string in the A/UX 3.1 sh. + cat <<_ACEOF +\`configure' configures libzipper 1.0.3 to adapt to many kinds of systems. + +Usage: $0 [OPTION]... [VAR=VALUE]... + +To assign environment variables (e.g., CC, CFLAGS...), specify them as +VAR=VALUE. See below for descriptions of some of the useful variables. + +Defaults for the options are specified in brackets. + +Configuration: + -h, --help display this help and exit + --help=short display options specific to this package + --help=recursive display the short help of all the included packages + -V, --version display version information and exit + -q, --quiet, --silent do not print \`checking ...' messages + --cache-file=FILE cache test results in FILE [disabled] + -C, --config-cache alias for \`--cache-file=config.cache' + -n, --no-create do not create output files + --srcdir=DIR find the sources in DIR [configure dir or \`..'] + +Installation directories: + --prefix=PREFIX install architecture-independent files in PREFIX + [$ac_default_prefix] + --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX + [PREFIX] + +By default, \`make install' will install all the files in +\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify +an installation prefix other than \`$ac_default_prefix' using \`--prefix', +for instance \`--prefix=\$HOME'. + +For better control, use the options below. + +Fine tuning of the installation directories: + --bindir=DIR user executables [EPREFIX/bin] + --sbindir=DIR system admin executables [EPREFIX/sbin] + --libexecdir=DIR program executables [EPREFIX/libexec] + --sysconfdir=DIR read-only single-machine data [PREFIX/etc] + --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] + --localstatedir=DIR modifiable single-machine data [PREFIX/var] + --libdir=DIR object code libraries [EPREFIX/lib] + --includedir=DIR C header files [PREFIX/include] + --oldincludedir=DIR C header files for non-gcc [/usr/include] + --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] + --datadir=DIR read-only architecture-independent data [DATAROOTDIR] + --infodir=DIR info documentation [DATAROOTDIR/info] + --localedir=DIR locale-dependent data [DATAROOTDIR/locale] + --mandir=DIR man documentation [DATAROOTDIR/man] + --docdir=DIR documentation root [DATAROOTDIR/doc/libzipper] + --htmldir=DIR html documentation [DOCDIR] + --dvidir=DIR dvi documentation [DOCDIR] + --pdfdir=DIR pdf documentation [DOCDIR] + --psdir=DIR ps documentation [DOCDIR] +_ACEOF + + cat <<\_ACEOF + +Program names: + --program-prefix=PREFIX prepend PREFIX to installed program names + --program-suffix=SUFFIX append SUFFIX to installed program names + --program-transform-name=PROGRAM run sed PROGRAM on installed program names + +System types: + --build=BUILD configure for building on BUILD [guessed] + --host=HOST cross-compile to build programs to run on HOST [BUILD] + --target=TARGET configure for building compilers for TARGET [HOST] +_ACEOF +fi + +if test -n "$ac_init_help"; then + case $ac_init_help in + short | recursive ) echo "Configuration of libzipper 1.0.3:";; + esac + cat <<\_ACEOF + +Optional Features: + --disable-option-checking ignore unrecognized --enable/--with options + --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) + --enable-FEATURE[=ARG] include FEATURE [ARG=yes] + --enable-maintainer-mode enable make rules and dependencies not useful + (and sometimes confusing) to the casual installer + --disable-dependency-tracking speeds up one-time build + --enable-dependency-tracking do not reject slow dependency extractors + --enable-shared[=PKGS] build shared libraries [default=yes] + --enable-static[=PKGS] build static libraries [default=yes] + --enable-fast-install[=PKGS] + optimize for fast installation [default=yes] + --disable-libtool-lock avoid locking (might break parallel builds) + --disable-doxygen-doc don't generate any doxygen documentation + --enable-doxygen-dot generate graphics for doxygen documentation + --enable-doxygen-man generate doxygen manual pages + --enable-doxygen-rtf generate doxygen RTF documentation + --enable-doxygen-xml generate doxygen XML documentation + --enable-doxygen-chm generate doxygen compressed HTML help documentation + --enable-doxygen-chi generate doxygen seperate compressed HTML help index + file + --disable-doxygen-html don't generate doxygen plain HTML documentation + --enable-doxygen-ps generate doxygen PostScript documentation + --enable-doxygen-pdf generate doxygen PDF documentation + +Optional Packages: + --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] + --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) + --with-pic try to use only PIC/non-PIC objects [default=use + both] + --with-gnu-ld assume the C compiler uses GNU ld [default=no] + --with-sysroot=DIR Search for dependent libraries within DIR + (or the compiler's sysroot if not specified). + +Some influential environment variables: + CXX C++ compiler command + CXXFLAGS C++ compiler flags + LDFLAGS linker flags, e.g. -L if you have libraries in a + nonstandard directory + LIBS libraries to pass to the linker, e.g. -l + CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I if + you have headers in a nonstandard directory + CC C compiler command + CFLAGS C compiler flags + CPP C preprocessor + CXXCPP C++ preprocessor + DOXYGEN_PAPER_SIZE + a4wide (default), a4, letter, legal or executive + PKG_CONFIG path to pkg-config utility + PKG_CONFIG_PATH + directories to add to pkg-config's search path + PKG_CONFIG_LIBDIR + path overriding pkg-config's built-in search path + ZLIB_CFLAGS C compiler flags for ZLIB, overriding pkg-config + ZLIB_LIBS linker flags for ZLIB, overriding pkg-config + +Use these variables to override the choices made by `configure' or to help +it to find libraries and programs with nonstandard names/locations. + +Report bugs to . +_ACEOF +ac_status=$? +fi + +if test "$ac_init_help" = "recursive"; then + # If there are subdirs, report their specific --help. + for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue + test -d "$ac_dir" || + { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } || + continue + ac_builddir=. + +case "$ac_dir" in +.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; +*) + ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` + # A ".." for each directory in $ac_dir_suffix. + ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` + case $ac_top_builddir_sub in + "") ac_top_builddir_sub=. ac_top_build_prefix= ;; + *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; + esac ;; +esac +ac_abs_top_builddir=$ac_pwd +ac_abs_builddir=$ac_pwd$ac_dir_suffix +# for backward compatibility: +ac_top_builddir=$ac_top_build_prefix + +case $srcdir in + .) # We are building in place. + ac_srcdir=. + ac_top_srcdir=$ac_top_builddir_sub + ac_abs_top_srcdir=$ac_pwd ;; + [\\/]* | ?:[\\/]* ) # Absolute name. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir + ac_abs_top_srcdir=$srcdir ;; + *) # Relative name. + ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_build_prefix$srcdir + ac_abs_top_srcdir=$ac_pwd/$srcdir ;; +esac +ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix + + cd "$ac_dir" || { ac_status=$?; continue; } + # Check for guested configure. + if test -f "$ac_srcdir/configure.gnu"; then + echo && + $SHELL "$ac_srcdir/configure.gnu" --help=recursive + elif test -f "$ac_srcdir/configure"; then + echo && + $SHELL "$ac_srcdir/configure" --help=recursive + else + $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 + fi || ac_status=$? + cd "$ac_pwd" || { ac_status=$?; break; } + done +fi + +test -n "$ac_init_help" && exit $ac_status +if $ac_init_version; then + cat <<\_ACEOF +libzipper configure 1.0.3 +generated by GNU Autoconf 2.68 + +Copyright (C) 2010 Free Software Foundation, Inc. +This configure script is free software; the Free Software Foundation +gives unlimited permission to copy, distribute and modify it. +_ACEOF + exit +fi + +## ------------------------ ## +## Autoconf initialization. ## +## ------------------------ ## + +# ac_fn_cxx_try_compile LINENO +# ---------------------------- +# Try to compile conftest.$ac_ext, and return whether this succeeded. +ac_fn_cxx_try_compile () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + rm -f conftest.$ac_objext + if { { ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_compile") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + grep -v '^ *+' conftest.err >conftest.er1 + cat conftest.er1 >&5 + mv -f conftest.er1 conftest.err + fi + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && { + test -z "$ac_cxx_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then : + ac_retval=0 +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=1 +fi + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + as_fn_set_status $ac_retval + +} # ac_fn_cxx_try_compile + +# ac_fn_c_try_compile LINENO +# -------------------------- +# Try to compile conftest.$ac_ext, and return whether this succeeded. +ac_fn_c_try_compile () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + rm -f conftest.$ac_objext + if { { ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_compile") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + grep -v '^ *+' conftest.err >conftest.er1 + cat conftest.er1 >&5 + mv -f conftest.er1 conftest.err + fi + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then : + ac_retval=0 +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=1 +fi + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + as_fn_set_status $ac_retval + +} # ac_fn_c_try_compile + +# ac_fn_c_try_link LINENO +# ----------------------- +# Try to link conftest.$ac_ext, and return whether this succeeded. +ac_fn_c_try_link () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + rm -f conftest.$ac_objext conftest$ac_exeext + if { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + grep -v '^ *+' conftest.err >conftest.er1 + cat conftest.er1 >&5 + mv -f conftest.er1 conftest.err + fi + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then : + ac_retval=0 +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=1 +fi + # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information + # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would + # interfere with the next link command; also delete a directory that is + # left behind by Apple's compiler. We do this before executing the actions. + rm -rf conftest.dSYM conftest_ipa8_conftest.oo + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + as_fn_set_status $ac_retval + +} # ac_fn_c_try_link + +# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES +# ------------------------------------------------------- +# Tests whether HEADER exists and can be compiled using the include files in +# INCLUDES, setting the cache variable VAR accordingly. +ac_fn_c_check_header_compile () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 +$as_echo_n "checking for $2... " >&6; } +if eval \${$3+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +#include <$2> +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + eval "$3=yes" +else + eval "$3=no" +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + +} # ac_fn_c_check_header_compile + +# ac_fn_c_try_cpp LINENO +# ---------------------- +# Try to preprocess conftest.$ac_ext, and return whether this succeeded. +ac_fn_c_try_cpp () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + if { { ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + grep -v '^ *+' conftest.err >conftest.er1 + cat conftest.er1 >&5 + mv -f conftest.er1 conftest.err + fi + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } > conftest.i && { + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || + test ! -s conftest.err + }; then : + ac_retval=0 +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=1 +fi + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + as_fn_set_status $ac_retval + +} # ac_fn_c_try_cpp + +# ac_fn_c_try_run LINENO +# ---------------------- +# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes +# that executables *can* be run. +ac_fn_c_try_run () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + if { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && { ac_try='./conftest$ac_exeext' + { { case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; }; then : + ac_retval=0 +else + $as_echo "$as_me: program exited with status $ac_status" >&5 + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=$ac_status +fi + rm -rf conftest.dSYM conftest_ipa8_conftest.oo + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + as_fn_set_status $ac_retval + +} # ac_fn_c_try_run + +# ac_fn_c_check_func LINENO FUNC VAR +# ---------------------------------- +# Tests whether FUNC exists, setting the cache variable VAR accordingly +ac_fn_c_check_func () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 +$as_echo_n "checking for $2... " >&6; } +if eval \${$3+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +/* Define $2 to an innocuous variant, in case declares $2. + For example, HP-UX 11i declares gettimeofday. */ +#define $2 innocuous_$2 + +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char $2 (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ + +#ifdef __STDC__ +# include +#else +# include +#endif + +#undef $2 + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char $2 (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined __stub_$2 || defined __stub___$2 +choke me +#endif + +int +main () +{ +return $2 (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + eval "$3=yes" +else + eval "$3=no" +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + +} # ac_fn_c_check_func + +# ac_fn_cxx_try_cpp LINENO +# ------------------------ +# Try to preprocess conftest.$ac_ext, and return whether this succeeded. +ac_fn_cxx_try_cpp () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + if { { ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + grep -v '^ *+' conftest.err >conftest.er1 + cat conftest.er1 >&5 + mv -f conftest.er1 conftest.err + fi + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } > conftest.i && { + test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" || + test ! -s conftest.err + }; then : + ac_retval=0 +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=1 +fi + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + as_fn_set_status $ac_retval + +} # ac_fn_cxx_try_cpp + +# ac_fn_cxx_try_link LINENO +# ------------------------- +# Try to link conftest.$ac_ext, and return whether this succeeded. +ac_fn_cxx_try_link () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + rm -f conftest.$ac_objext conftest$ac_exeext + if { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + grep -v '^ *+' conftest.err >conftest.er1 + cat conftest.er1 >&5 + mv -f conftest.er1 conftest.err + fi + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && { + test -z "$ac_cxx_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then : + ac_retval=0 +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=1 +fi + # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information + # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would + # interfere with the next link command; also delete a directory that is + # left behind by Apple's compiler. We do this before executing the actions. + rm -rf conftest.dSYM conftest_ipa8_conftest.oo + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + as_fn_set_status $ac_retval + +} # ac_fn_cxx_try_link + +# ac_fn_cxx_check_decl LINENO SYMBOL VAR INCLUDES +# ----------------------------------------------- +# Tests whether SYMBOL is declared in INCLUDES, setting cache variable VAR +# accordingly. +ac_fn_cxx_check_decl () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + as_decl_name=`echo $2|sed 's/ *(.*//'` + as_decl_use=`echo $2|sed -e 's/(/((/' -e 's/)/) 0&/' -e 's/,/) 0& (/g'` + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $as_decl_name is declared" >&5 +$as_echo_n "checking whether $as_decl_name is declared... " >&6; } +if eval \${$3+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +int +main () +{ +#ifndef $as_decl_name +#ifdef __cplusplus + (void) $as_decl_use; +#else + (void) $as_decl_name; +#endif +#endif + + ; + return 0; +} +_ACEOF +if ac_fn_cxx_try_compile "$LINENO"; then : + eval "$3=yes" +else + eval "$3=no" +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + +} # ac_fn_cxx_check_decl + +# ac_fn_cxx_check_func LINENO FUNC VAR +# ------------------------------------ +# Tests whether FUNC exists, setting the cache variable VAR accordingly +ac_fn_cxx_check_func () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 +$as_echo_n "checking for $2... " >&6; } +if eval \${$3+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +/* Define $2 to an innocuous variant, in case declares $2. + For example, HP-UX 11i declares gettimeofday. */ +#define $2 innocuous_$2 + +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char $2 (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ + +#ifdef __STDC__ +# include +#else +# include +#endif + +#undef $2 + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char $2 (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined __stub_$2 || defined __stub___$2 +choke me +#endif + +int +main () +{ +return $2 (); + ; + return 0; +} +_ACEOF +if ac_fn_cxx_try_link "$LINENO"; then : + eval "$3=yes" +else + eval "$3=no" +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + +} # ac_fn_cxx_check_func + +# ac_fn_cxx_try_run LINENO +# ------------------------ +# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes +# that executables *can* be run. +ac_fn_cxx_try_run () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + if { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && { ac_try='./conftest$ac_exeext' + { { case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; }; then : + ac_retval=0 +else + $as_echo "$as_me: program exited with status $ac_status" >&5 + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=$ac_status +fi + rm -rf conftest.dSYM conftest_ipa8_conftest.oo + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + as_fn_set_status $ac_retval + +} # ac_fn_cxx_try_run +cat >config.log <<_ACEOF +This file contains any messages produced by compilers while +running configure, to aid debugging if configure makes a mistake. + +It was created by libzipper $as_me 1.0.3, which was +generated by GNU Autoconf 2.68. Invocation command line was + + $ $0 $@ + +_ACEOF +exec 5>>config.log +{ +cat <<_ASUNAME +## --------- ## +## Platform. ## +## --------- ## + +hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` +uname -m = `(uname -m) 2>/dev/null || echo unknown` +uname -r = `(uname -r) 2>/dev/null || echo unknown` +uname -s = `(uname -s) 2>/dev/null || echo unknown` +uname -v = `(uname -v) 2>/dev/null || echo unknown` + +/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` +/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` + +/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` +/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` +/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` +/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` +/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` +/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` +/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` + +_ASUNAME + +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + $as_echo "PATH: $as_dir" + done +IFS=$as_save_IFS + +} >&5 + +cat >&5 <<_ACEOF + + +## ----------- ## +## Core tests. ## +## ----------- ## + +_ACEOF + + +# Keep a trace of the command line. +# Strip out --no-create and --no-recursion so they do not pile up. +# Strip out --silent because we don't want to record it for future runs. +# Also quote any args containing shell meta-characters. +# Make two passes to allow for proper duplicate-argument suppression. +ac_configure_args= +ac_configure_args0= +ac_configure_args1= +ac_must_keep_next=false +for ac_pass in 1 2 +do + for ac_arg + do + case $ac_arg in + -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + continue ;; + *\'*) + ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + case $ac_pass in + 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;; + 2) + as_fn_append ac_configure_args1 " '$ac_arg'" + if test $ac_must_keep_next = true; then + ac_must_keep_next=false # Got value, back to normal. + else + case $ac_arg in + *=* | --config-cache | -C | -disable-* | --disable-* \ + | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ + | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ + | -with-* | --with-* | -without-* | --without-* | --x) + case "$ac_configure_args0 " in + "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; + esac + ;; + -* ) ac_must_keep_next=true ;; + esac + fi + as_fn_append ac_configure_args " '$ac_arg'" + ;; + esac + done +done +{ ac_configure_args0=; unset ac_configure_args0;} +{ ac_configure_args1=; unset ac_configure_args1;} + +# When interrupted or exit'd, cleanup temporary files, and complete +# config.log. We remove comments because anyway the quotes in there +# would cause problems or look ugly. +# WARNING: Use '\'' to represent an apostrophe within the trap. +# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. +trap 'exit_status=$? + # Save into config.log some information that might help in debugging. + { + echo + + $as_echo "## ---------------- ## +## Cache variables. ## +## ---------------- ##" + echo + # The following way of writing the cache mishandles newlines in values, +( + for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do + eval ac_val=\$$ac_var + case $ac_val in #( + *${as_nl}*) + case $ac_var in #( + *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 +$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; + esac + case $ac_var in #( + _ | IFS | as_nl) ;; #( + BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( + *) { eval $ac_var=; unset $ac_var;} ;; + esac ;; + esac + done + (set) 2>&1 | + case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( + *${as_nl}ac_space=\ *) + sed -n \ + "s/'\''/'\''\\\\'\'''\''/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" + ;; #( + *) + sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" + ;; + esac | + sort +) + echo + + $as_echo "## ----------------- ## +## Output variables. ## +## ----------------- ##" + echo + for ac_var in $ac_subst_vars + do + eval ac_val=\$$ac_var + case $ac_val in + *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; + esac + $as_echo "$ac_var='\''$ac_val'\''" + done | sort + echo + + if test -n "$ac_subst_files"; then + $as_echo "## ------------------- ## +## File substitutions. ## +## ------------------- ##" + echo + for ac_var in $ac_subst_files + do + eval ac_val=\$$ac_var + case $ac_val in + *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; + esac + $as_echo "$ac_var='\''$ac_val'\''" + done | sort + echo + fi + + if test -s confdefs.h; then + $as_echo "## ----------- ## +## confdefs.h. ## +## ----------- ##" + echo + cat confdefs.h + echo + fi + test "$ac_signal" != 0 && + $as_echo "$as_me: caught signal $ac_signal" + $as_echo "$as_me: exit $exit_status" + } >&5 + rm -f core *.core core.conftest.* && + rm -f -r conftest* confdefs* conf$$* $ac_clean_files && + exit $exit_status +' 0 +for ac_signal in 1 2 13 15; do + trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal +done +ac_signal=0 + +# confdefs.h avoids OS command line length limits that DEFS can exceed. +rm -f -r conftest* confdefs.h + +$as_echo "/* confdefs.h */" > confdefs.h + +# Predefined preprocessor variables. + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_NAME "$PACKAGE_NAME" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_TARNAME "$PACKAGE_TARNAME" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_VERSION "$PACKAGE_VERSION" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_STRING "$PACKAGE_STRING" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_URL "$PACKAGE_URL" +_ACEOF + + +# Let the site file select an alternate cache file if it wants to. +# Prefer an explicitly selected file to automatically selected ones. +ac_site_file1=NONE +ac_site_file2=NONE +if test -n "$CONFIG_SITE"; then + # We do not want a PATH search for config.site. + case $CONFIG_SITE in #(( + -*) ac_site_file1=./$CONFIG_SITE;; + */*) ac_site_file1=$CONFIG_SITE;; + *) ac_site_file1=./$CONFIG_SITE;; + esac +elif test "x$prefix" != xNONE; then + ac_site_file1=$prefix/share/config.site + ac_site_file2=$prefix/etc/config.site +else + ac_site_file1=$ac_default_prefix/share/config.site + ac_site_file2=$ac_default_prefix/etc/config.site +fi +for ac_site_file in "$ac_site_file1" "$ac_site_file2" +do + test "x$ac_site_file" = xNONE && continue + if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5 +$as_echo "$as_me: loading site script $ac_site_file" >&6;} + sed 's/^/| /' "$ac_site_file" >&5 + . "$ac_site_file" \ + || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "failed to load site script $ac_site_file +See \`config.log' for more details" "$LINENO" 5; } + fi +done + +if test -r "$cache_file"; then + # Some versions of bash will fail to source /dev/null (special files + # actually), so we avoid doing that. DJGPP emulates it as a regular file. + if test /dev/null != "$cache_file" && test -f "$cache_file"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5 +$as_echo "$as_me: loading cache $cache_file" >&6;} + case $cache_file in + [\\/]* | ?:[\\/]* ) . "$cache_file";; + *) . "./$cache_file";; + esac + fi +else + { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5 +$as_echo "$as_me: creating cache $cache_file" >&6;} + >$cache_file +fi + +# Check that the precious variables saved in the cache have kept the same +# value. +ac_cache_corrupted=false +for ac_var in $ac_precious_vars; do + eval ac_old_set=\$ac_cv_env_${ac_var}_set + eval ac_new_set=\$ac_env_${ac_var}_set + eval ac_old_val=\$ac_cv_env_${ac_var}_value + eval ac_new_val=\$ac_env_${ac_var}_value + case $ac_old_set,$ac_new_set in + set,) + { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 +$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,set) + { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5 +$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,);; + *) + if test "x$ac_old_val" != "x$ac_new_val"; then + # differences in whitespace do not lead to failure. + ac_old_val_w=`echo x $ac_old_val` + ac_new_val_w=`echo x $ac_new_val` + if test "$ac_old_val_w" != "$ac_new_val_w"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5 +$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} + ac_cache_corrupted=: + else + { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5 +$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;} + eval $ac_var=\$ac_old_val + fi + { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5 +$as_echo "$as_me: former value: \`$ac_old_val'" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5 +$as_echo "$as_me: current value: \`$ac_new_val'" >&2;} + fi;; + esac + # Pass precious variables to config.status. + if test "$ac_new_set" = set; then + case $ac_new_val in + *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; + *) ac_arg=$ac_var=$ac_new_val ;; + esac + case " $ac_configure_args " in + *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. + *) as_fn_append ac_configure_args " '$ac_arg'" ;; + esac + fi +done +if $ac_cache_corrupted; then + { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5 +$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;} + as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5 +fi +## -------------------- ## +## Main body of script. ## +## -------------------- ## + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + +ac_aux_dir= +for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do + if test -f "$ac_dir/install-sh"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install-sh -c" + break + elif test -f "$ac_dir/install.sh"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install.sh -c" + break + elif test -f "$ac_dir/shtool"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/shtool install -c" + break + fi +done +if test -z "$ac_aux_dir"; then + as_fn_error $? "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5 +fi + +# These three variables are undocumented and unsupported, +# and are intended to be withdrawn in a future Autoconf release. +# They can cause serious problems if a builder's source tree is in a directory +# whose full name contains unusual characters. +ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. +ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. +ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. + + +# Make sure we can run config.sub. +$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 || + as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5 + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5 +$as_echo_n "checking build system type... " >&6; } +if ${ac_cv_build+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_build_alias=$build_alias +test "x$ac_build_alias" = x && + ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"` +test "x$ac_build_alias" = x && + as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5 +ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` || + as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5 + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5 +$as_echo "$ac_cv_build" >&6; } +case $ac_cv_build in +*-*-*) ;; +*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;; +esac +build=$ac_cv_build +ac_save_IFS=$IFS; IFS='-' +set x $ac_cv_build +shift +build_cpu=$1 +build_vendor=$2 +shift; shift +# Remember, the first character of IFS is used to create $*, +# except with old shells: +build_os=$* +IFS=$ac_save_IFS +case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5 +$as_echo_n "checking host system type... " >&6; } +if ${ac_cv_host+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test "x$host_alias" = x; then + ac_cv_host=$ac_cv_build +else + ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` || + as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5 +fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5 +$as_echo "$ac_cv_host" >&6; } +case $ac_cv_host in +*-*-*) ;; +*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;; +esac +host=$ac_cv_host +ac_save_IFS=$IFS; IFS='-' +set x $ac_cv_host +shift +host_cpu=$1 +host_vendor=$2 +shift; shift +# Remember, the first character of IFS is used to create $*, +# except with old shells: +host_os=$* +IFS=$ac_save_IFS +case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking target system type" >&5 +$as_echo_n "checking target system type... " >&6; } +if ${ac_cv_target+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test "x$target_alias" = x; then + ac_cv_target=$ac_cv_host +else + ac_cv_target=`$SHELL "$ac_aux_dir/config.sub" $target_alias` || + as_fn_error $? "$SHELL $ac_aux_dir/config.sub $target_alias failed" "$LINENO" 5 +fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_target" >&5 +$as_echo "$ac_cv_target" >&6; } +case $ac_cv_target in +*-*-*) ;; +*) as_fn_error $? "invalid value of canonical target" "$LINENO" 5;; +esac +target=$ac_cv_target +ac_save_IFS=$IFS; IFS='-' +set x $ac_cv_target +shift +target_cpu=$1 +target_vendor=$2 +shift; shift +# Remember, the first character of IFS is used to create $*, +# except with old shells: +target_os=$* +IFS=$ac_save_IFS +case $target_os in *\ *) target_os=`echo "$target_os" | sed 's/ /-/g'`;; esac + + +# The aliases save the names the user supplied, while $host etc. +# will get canonicalized. +test -n "$target_alias" && + test "$program_prefix$program_suffix$program_transform_name" = \ + NONENONEs,x,x, && + program_prefix=${target_alias}- +am__api_version='1.11' + +# Find a good install program. We prefer a C program (faster), +# so one script is as good as another. But avoid the broken or +# incompatible versions: +# SysV /etc/install, /usr/sbin/install +# SunOS /usr/etc/install +# IRIX /sbin/install +# AIX /bin/install +# AmigaOS /C/install, which installs bootblocks on floppy discs +# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag +# AFS /usr/afsws/bin/install, which mishandles nonexistent args +# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" +# OS/2's system install, which has a completely different semantic +# ./install, which can be erroneously created by make from ./install.sh. +# Reject install programs that cannot install multiple files. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5 +$as_echo_n "checking for a BSD-compatible install... " >&6; } +if test -z "$INSTALL"; then +if ${ac_cv_path_install+:} false; then : + $as_echo_n "(cached) " >&6 +else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + # Account for people who put trailing slashes in PATH elements. +case $as_dir/ in #(( + ./ | .// | /[cC]/* | \ + /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ + ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \ + /usr/ucb/* ) ;; + *) + # OSF1 and SCO ODT 3.0 have their own names for install. + # Don't use installbsd from OSF since it installs stuff as root + # by default. + for ac_prog in ginstall scoinst install; do + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then + if test $ac_prog = install && + grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # AIX install. It has an incompatible calling convention. + : + elif test $ac_prog = install && + grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # program-specific install script used by HP pwplus--don't use. + : + else + rm -rf conftest.one conftest.two conftest.dir + echo one > conftest.one + echo two > conftest.two + mkdir conftest.dir + if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" && + test -s conftest.one && test -s conftest.two && + test -s conftest.dir/conftest.one && + test -s conftest.dir/conftest.two + then + ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" + break 3 + fi + fi + fi + done + done + ;; +esac + + done +IFS=$as_save_IFS + +rm -rf conftest.one conftest.two conftest.dir + +fi + if test "${ac_cv_path_install+set}" = set; then + INSTALL=$ac_cv_path_install + else + # As a last resort, use the slow shell script. Don't cache a + # value for INSTALL within a source directory, because that will + # break other packages using the cache if that directory is + # removed, or if the value is a relative name. + INSTALL=$ac_install_sh + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5 +$as_echo "$INSTALL" >&6; } + +# Use test -z because SunOS4 sh mishandles braces in ${var-val}. +# It thinks the first close brace ends the variable substitution. +test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' + +test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' + +test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5 +$as_echo_n "checking whether build environment is sane... " >&6; } +# Just in case +sleep 1 +echo timestamp > conftest.file +# Reject unsafe characters in $srcdir or the absolute working directory +# name. Accept space and tab only in the latter. +am_lf=' +' +case `pwd` in + *[\\\"\#\$\&\'\`$am_lf]*) + as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;; +esac +case $srcdir in + *[\\\"\#\$\&\'\`$am_lf\ \ ]*) + as_fn_error $? "unsafe srcdir value: \`$srcdir'" "$LINENO" 5;; +esac + +# Do `set' in a subshell so we don't clobber the current shell's +# arguments. Must try -L first in case configure is actually a +# symlink; some systems play weird games with the mod time of symlinks +# (eg FreeBSD returns the mod time of the symlink's containing +# directory). +if ( + set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` + if test "$*" = "X"; then + # -L didn't work. + set X `ls -t "$srcdir/configure" conftest.file` + fi + rm -f conftest.file + if test "$*" != "X $srcdir/configure conftest.file" \ + && test "$*" != "X conftest.file $srcdir/configure"; then + + # If neither matched, then we have a broken ls. This can happen + # if, for instance, CONFIG_SHELL is bash and it inherits a + # broken ls alias from the environment. This has actually + # happened. Such a system could not be considered "sane". + as_fn_error $? "ls -t appears to fail. Make sure there is not a broken +alias in your environment" "$LINENO" 5 + fi + + test "$2" = conftest.file + ) +then + # Ok. + : +else + as_fn_error $? "newly created file is older than distributed files! +Check your system clock" "$LINENO" 5 +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +test "$program_prefix" != NONE && + program_transform_name="s&^&$program_prefix&;$program_transform_name" +# Use a double $ so make ignores it. +test "$program_suffix" != NONE && + program_transform_name="s&\$&$program_suffix&;$program_transform_name" +# Double any \ or $. +# By default was `s,x,x', remove it if useless. +ac_script='s/[\\$]/&&/g;s/;s,x,x,$//' +program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"` + +# expand $ac_aux_dir to an absolute path +am_aux_dir=`cd $ac_aux_dir && pwd` + +if test x"${MISSING+set}" != xset; then + case $am_aux_dir in + *\ * | *\ *) + MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; + *) + MISSING="\${SHELL} $am_aux_dir/missing" ;; + esac +fi +# Use eval to expand $SHELL +if eval "$MISSING --run true"; then + am_missing_run="$MISSING --run " +else + am_missing_run= + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`missing' script is too old or missing" >&5 +$as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;} +fi + +if test x"${install_sh}" != xset; then + case $am_aux_dir in + *\ * | *\ *) + install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; + *) + install_sh="\${SHELL} $am_aux_dir/install-sh" + esac +fi + +# Installed binaries are usually stripped using `strip' when the user +# run `make install-strip'. However `strip' might not be the right +# tool to use in cross-compilation environments, therefore Automake +# will honor the `STRIP' environment variable to overrule this program. +if test "$cross_compiling" != no; then + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. +set dummy ${ac_tool_prefix}strip; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_STRIP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$STRIP"; then + ac_cv_prog_STRIP="$STRIP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_STRIP="${ac_tool_prefix}strip" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +STRIP=$ac_cv_prog_STRIP +if test -n "$STRIP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 +$as_echo "$STRIP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_STRIP"; then + ac_ct_STRIP=$STRIP + # Extract the first word of "strip", so it can be a program name with args. +set dummy strip; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_STRIP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_STRIP"; then + ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_STRIP="strip" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP +if test -n "$ac_ct_STRIP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 +$as_echo "$ac_ct_STRIP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_STRIP" = x; then + STRIP=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + STRIP=$ac_ct_STRIP + fi +else + STRIP="$ac_cv_prog_STRIP" +fi + +fi +INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5 +$as_echo_n "checking for a thread-safe mkdir -p... " >&6; } +if test -z "$MKDIR_P"; then + if ${ac_cv_path_mkdir+:} false; then : + $as_echo_n "(cached) " >&6 +else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in mkdir gmkdir; do + for ac_exec_ext in '' $ac_executable_extensions; do + { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue + case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #( + 'mkdir (GNU coreutils) '* | \ + 'mkdir (coreutils) '* | \ + 'mkdir (fileutils) '4.1*) + ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext + break 3;; + esac + done + done + done +IFS=$as_save_IFS + +fi + + test -d ./--version && rmdir ./--version + if test "${ac_cv_path_mkdir+set}" = set; then + MKDIR_P="$ac_cv_path_mkdir -p" + else + # As a last resort, use the slow shell script. Don't cache a + # value for MKDIR_P within a source directory, because that will + # break other packages using the cache if that directory is + # removed, or if the value is a relative name. + MKDIR_P="$ac_install_sh -d" + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5 +$as_echo "$MKDIR_P" >&6; } + +mkdir_p="$MKDIR_P" +case $mkdir_p in + [\\/$]* | ?:[\\/]*) ;; + */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;; +esac + +for ac_prog in gawk mawk nawk awk +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_AWK+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$AWK"; then + ac_cv_prog_AWK="$AWK" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_AWK="$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +AWK=$ac_cv_prog_AWK +if test -n "$AWK"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5 +$as_echo "$AWK" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$AWK" && break +done + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5 +$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } +set x ${MAKE-make} +ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` +if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat >conftest.make <<\_ACEOF +SHELL = /bin/sh +all: + @echo '@@@%%%=$(MAKE)=@@@%%%' +_ACEOF +# GNU make sometimes prints "make[1]: Entering ...", which would confuse us. +case `${MAKE-make} -f conftest.make 2>/dev/null` in + *@@@%%%=?*=@@@%%%*) + eval ac_cv_prog_make_${ac_make}_set=yes;; + *) + eval ac_cv_prog_make_${ac_make}_set=no;; +esac +rm -f conftest.make +fi +if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + SET_MAKE= +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + SET_MAKE="MAKE=${MAKE-make}" +fi + +rm -rf .tst 2>/dev/null +mkdir .tst 2>/dev/null +if test -d .tst; then + am__leading_dot=. +else + am__leading_dot=_ +fi +rmdir .tst 2>/dev/null + +if test "`cd $srcdir && pwd`" != "`pwd`"; then + # Use -I$(srcdir) only when $(srcdir) != ., so that make's output + # is not polluted with repeated "-I." + am__isrc=' -I$(srcdir)' + # test to see if srcdir already configured + if test -f $srcdir/config.status; then + as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5 + fi +fi + +# test whether we have cygpath +if test -z "$CYGPATH_W"; then + if (cygpath --version) >/dev/null 2>/dev/null; then + CYGPATH_W='cygpath -w' + else + CYGPATH_W=echo + fi +fi + + +# Define the identity of the package. + PACKAGE='libzipper' + VERSION='1.0.3' + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE "$PACKAGE" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define VERSION "$VERSION" +_ACEOF + +# Some tools Automake needs. + +ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"} + + +AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"} + + +AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"} + + +AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"} + + +MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} + +# We need awk for the "check" target. The system "awk" is bad on +# some platforms. +# Always define AMTAR for backward compatibility. + +AMTAR=${AMTAR-"${am_missing_run}tar"} + +am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -' + + + + + +ac_config_headers="$ac_config_headers autoconfig.h" + +ac_config_files="$ac_config_files Makefile Doxyfile libzipper1.pc zipper.1" + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to enable maintainer-specific portions of Makefiles" >&5 +$as_echo_n "checking whether to enable maintainer-specific portions of Makefiles... " >&6; } + # Check whether --enable-maintainer-mode was given. +if test "${enable_maintainer_mode+set}" = set; then : + enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval +else + USE_MAINTAINER_MODE=no +fi + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_MAINTAINER_MODE" >&5 +$as_echo "$USE_MAINTAINER_MODE" >&6; } + if test $USE_MAINTAINER_MODE = yes; then + MAINTAINER_MODE_TRUE= + MAINTAINER_MODE_FALSE='#' +else + MAINTAINER_MODE_TRUE='#' + MAINTAINER_MODE_FALSE= +fi + + MAINT=$MAINTAINER_MODE_TRUE + + + +libzipper_version=1.0.3 + + +ac_ext=cpp +ac_cpp='$CXXCPP $CPPFLAGS' +ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_cxx_compiler_gnu +if test -z "$CXX"; then + if test -n "$CCC"; then + CXX=$CCC + else + if test -n "$ac_tool_prefix"; then + for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. +set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CXX+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$CXX"; then + ac_cv_prog_CXX="$CXX" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_CXX="$ac_tool_prefix$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +CXX=$ac_cv_prog_CXX +if test -n "$CXX"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CXX" >&5 +$as_echo "$CXX" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$CXX" && break + done +fi +if test -z "$CXX"; then + ac_ct_CXX=$CXX + for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_CXX+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_CXX"; then + ac_cv_prog_ac_ct_CXX="$ac_ct_CXX" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_CXX="$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_CXX=$ac_cv_prog_ac_ct_CXX +if test -n "$ac_ct_CXX"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CXX" >&5 +$as_echo "$ac_ct_CXX" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$ac_ct_CXX" && break +done + + if test "x$ac_ct_CXX" = x; then + CXX="g++" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + CXX=$ac_ct_CXX + fi +fi + + fi +fi +# Provide some information about the compiler. +$as_echo "$as_me:${as_lineno-$LINENO}: checking for C++ compiler version" >&5 +set X $ac_compile +ac_compiler=$2 +for ac_option in --version -v -V -qversion; do + { { ac_try="$ac_compiler $ac_option >&5" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_compiler $ac_option >&5") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + sed '10a\ +... rest of stderr output deleted ... + 10q' conftest.err >conftest.er1 + cat conftest.er1 >&5 + fi + rm -f conftest.er1 conftest.err + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } +done + +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +ac_clean_files_save=$ac_clean_files +ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out" +# Try to create an executable without -o first, disregard a.out. +# It will help us diagnose broken compilers, and finding out an intuition +# of exeext. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C++ compiler works" >&5 +$as_echo_n "checking whether the C++ compiler works... " >&6; } +ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` + +# The possible output files: +ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*" + +ac_rmfiles= +for ac_file in $ac_files +do + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; + * ) ac_rmfiles="$ac_rmfiles $ac_file";; + esac +done +rm -f $ac_rmfiles + +if { { ac_try="$ac_link_default" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link_default") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then : + # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. +# So ignore a value of `no', otherwise this would lead to `EXEEXT = no' +# in a Makefile. We should not override ac_cv_exeext if it was cached, +# so that the user can short-circuit this test for compilers unknown to +# Autoconf. +for ac_file in $ac_files '' +do + test -f "$ac_file" || continue + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) + ;; + [ab].out ) + # We found the default executable, but exeext='' is most + # certainly right. + break;; + *.* ) + if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; + then :; else + ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` + fi + # We set ac_cv_exeext here because the later test for it is not + # safe: cross compilers may not add the suffix if given an `-o' + # argument, so we may need to know it at that point already. + # Even if this section looks crufty: it has the advantage of + # actually working. + break;; + * ) + break;; + esac +done +test "$ac_cv_exeext" = no && ac_cv_exeext= + +else + ac_file='' +fi +if test -z "$ac_file"; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +$as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error 77 "C++ compiler cannot create executables +See \`config.log' for more details" "$LINENO" 5; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C++ compiler default output file name" >&5 +$as_echo_n "checking for C++ compiler default output file name... " >&6; } +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5 +$as_echo "$ac_file" >&6; } +ac_exeext=$ac_cv_exeext + +rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out +ac_clean_files=$ac_clean_files_save +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5 +$as_echo_n "checking for suffix of executables... " >&6; } +if { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then : + # If both `conftest.exe' and `conftest' are `present' (well, observable) +# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will +# work properly (i.e., refer to `conftest.exe'), while it won't with +# `rm'. +for ac_file in conftest.exe conftest conftest.*; do + test -f "$ac_file" || continue + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; + *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` + break;; + * ) break;; + esac +done +else + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "cannot compute suffix of executables: cannot compile and link +See \`config.log' for more details" "$LINENO" 5; } +fi +rm -f conftest conftest$ac_cv_exeext +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5 +$as_echo "$ac_cv_exeext" >&6; } + +rm -f conftest.$ac_ext +EXEEXT=$ac_cv_exeext +ac_exeext=$EXEEXT +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +int +main () +{ +FILE *f = fopen ("conftest.out", "w"); + return ferror (f) || fclose (f) != 0; + + ; + return 0; +} +_ACEOF +ac_clean_files="$ac_clean_files conftest.out" +# Check that the compiler produces executables we can run. If not, either +# the compiler is broken, or we cross compile. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5 +$as_echo_n "checking whether we are cross compiling... " >&6; } +if test "$cross_compiling" != yes; then + { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + if { ac_try='./conftest$ac_cv_exeext' + { { case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; }; then + cross_compiling=no + else + if test "$cross_compiling" = maybe; then + cross_compiling=yes + else + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "cannot run C++ compiled programs. +If you meant to cross compile, use \`--host'. +See \`config.log' for more details" "$LINENO" 5; } + fi + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5 +$as_echo "$cross_compiling" >&6; } + +rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out +ac_clean_files=$ac_clean_files_save +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5 +$as_echo_n "checking for suffix of object files... " >&6; } +if ${ac_cv_objext+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.o conftest.obj +if { { ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_compile") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then : + for ac_file in conftest.o conftest.obj conftest.*; do + test -f "$ac_file" || continue; + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;; + *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` + break;; + esac +done +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "cannot compute suffix of object files: cannot compile +See \`config.log' for more details" "$LINENO" 5; } +fi +rm -f conftest.$ac_cv_objext conftest.$ac_ext +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5 +$as_echo "$ac_cv_objext" >&6; } +OBJEXT=$ac_cv_objext +ac_objext=$OBJEXT +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C++ compiler" >&5 +$as_echo_n "checking whether we are using the GNU C++ compiler... " >&6; } +if ${ac_cv_cxx_compiler_gnu+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ +#ifndef __GNUC__ + choke me +#endif + + ; + return 0; +} +_ACEOF +if ac_fn_cxx_try_compile "$LINENO"; then : + ac_compiler_gnu=yes +else + ac_compiler_gnu=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +ac_cv_cxx_compiler_gnu=$ac_compiler_gnu + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_cxx_compiler_gnu" >&5 +$as_echo "$ac_cv_cxx_compiler_gnu" >&6; } +if test $ac_compiler_gnu = yes; then + GXX=yes +else + GXX= +fi +ac_test_CXXFLAGS=${CXXFLAGS+set} +ac_save_CXXFLAGS=$CXXFLAGS +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CXX accepts -g" >&5 +$as_echo_n "checking whether $CXX accepts -g... " >&6; } +if ${ac_cv_prog_cxx_g+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_save_cxx_werror_flag=$ac_cxx_werror_flag + ac_cxx_werror_flag=yes + ac_cv_prog_cxx_g=no + CXXFLAGS="-g" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_cxx_try_compile "$LINENO"; then : + ac_cv_prog_cxx_g=yes +else + CXXFLAGS="" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_cxx_try_compile "$LINENO"; then : + +else + ac_cxx_werror_flag=$ac_save_cxx_werror_flag + CXXFLAGS="-g" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_cxx_try_compile "$LINENO"; then : + ac_cv_prog_cxx_g=yes +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + ac_cxx_werror_flag=$ac_save_cxx_werror_flag +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cxx_g" >&5 +$as_echo "$ac_cv_prog_cxx_g" >&6; } +if test "$ac_test_CXXFLAGS" = set; then + CXXFLAGS=$ac_save_CXXFLAGS +elif test $ac_cv_prog_cxx_g = yes; then + if test "$GXX" = yes; then + CXXFLAGS="-g -O2" + else + CXXFLAGS="-g" + fi +else + if test "$GXX" = yes; then + CXXFLAGS="-O2" + else + CXXFLAGS= + fi +fi +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +DEPDIR="${am__leading_dot}deps" + +ac_config_commands="$ac_config_commands depfiles" + + +am_make=${MAKE-make} +cat > confinc << 'END' +am__doit: + @echo this is the am__doit target +.PHONY: am__doit +END +# If we don't find an include directive, just comment out the code. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5 +$as_echo_n "checking for style of include used by $am_make... " >&6; } +am__include="#" +am__quote= +_am_result=none +# First try GNU make style include. +echo "include confinc" > confmf +# Ignore all kinds of additional output from `make'. +case `$am_make -s -f confmf 2> /dev/null` in #( +*the\ am__doit\ target*) + am__include=include + am__quote= + _am_result=GNU + ;; +esac +# Now try BSD make style include. +if test "$am__include" = "#"; then + echo '.include "confinc"' > confmf + case `$am_make -s -f confmf 2> /dev/null` in #( + *the\ am__doit\ target*) + am__include=.include + am__quote="\"" + _am_result=BSD + ;; + esac +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5 +$as_echo "$_am_result" >&6; } +rm -f confinc confmf + +# Check whether --enable-dependency-tracking was given. +if test "${enable_dependency_tracking+set}" = set; then : + enableval=$enable_dependency_tracking; +fi + +if test "x$enable_dependency_tracking" != xno; then + am_depcomp="$ac_aux_dir/depcomp" + AMDEPBACKSLASH='\' +fi + if test "x$enable_dependency_tracking" != xno; then + AMDEP_TRUE= + AMDEP_FALSE='#' +else + AMDEP_TRUE='#' + AMDEP_FALSE= +fi + + + +depcc="$CXX" am_compiler_list= + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 +$as_echo_n "checking dependency style of $depcc... " >&6; } +if ${am_cv_CXX_dependencies_compiler_type+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then + # We make a subdir and do the tests there. Otherwise we can end up + # making bogus files that we don't know about and never remove. For + # instance it was reported that on HP-UX the gcc test will end up + # making a dummy file named `D' -- because `-MD' means `put the output + # in D'. + mkdir conftest.dir + # Copy depcomp to subdir because otherwise we won't find it if we're + # using a relative directory. + cp "$am_depcomp" conftest.dir + cd conftest.dir + # We will build objects and dependencies in a subdirectory because + # it helps to detect inapplicable dependency modes. For instance + # both Tru64's cc and ICC support -MD to output dependencies as a + # side effect of compilation, but ICC will put the dependencies in + # the current directory while Tru64 will put them in the object + # directory. + mkdir sub + + am_cv_CXX_dependencies_compiler_type=none + if test "$am_compiler_list" = ""; then + am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` + fi + am__universal=false + case " $depcc " in #( + *\ -arch\ *\ -arch\ *) am__universal=true ;; + esac + + for depmode in $am_compiler_list; do + # Setup a source with many dependencies, because some compilers + # like to wrap large dependency lists on column 80 (with \), and + # we should not choose a depcomp mode which is confused by this. + # + # We need to recreate these files for each test, as the compiler may + # overwrite some of them when testing with obscure command lines. + # This happens at least with the AIX C compiler. + : > sub/conftest.c + for i in 1 2 3 4 5 6; do + echo '#include "conftst'$i'.h"' >> sub/conftest.c + # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with + # Solaris 8's {/usr,}/bin/sh. + touch sub/conftst$i.h + done + echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf + + # We check with `-c' and `-o' for the sake of the "dashmstdout" + # mode. It turns out that the SunPro C++ compiler does not properly + # handle `-M -o', and we need to detect this. Also, some Intel + # versions had trouble with output in subdirs + am__obj=sub/conftest.${OBJEXT-o} + am__minus_obj="-o $am__obj" + case $depmode in + gcc) + # This depmode causes a compiler race in universal mode. + test "$am__universal" = false || continue + ;; + nosideeffect) + # after this tag, mechanisms are not by side-effect, so they'll + # only be used when explicitly requested + if test "x$enable_dependency_tracking" = xyes; then + continue + else + break + fi + ;; + msvisualcpp | msvcmsys) + # This compiler won't grok `-c -o', but also, the minuso test has + # not run yet. These depmodes are late enough in the game, and + # so weak that their functioning should not be impacted. + am__obj=conftest.${OBJEXT-o} + am__minus_obj= + ;; + none) break ;; + esac + if depmode=$depmode \ + source=sub/conftest.c object=$am__obj \ + depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ + $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ + >/dev/null 2>conftest.err && + grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && + grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && + grep $am__obj sub/conftest.Po > /dev/null 2>&1 && + ${MAKE-make} -s -f confmf > /dev/null 2>&1; then + # icc doesn't choke on unknown options, it will just issue warnings + # or remarks (even with -Werror). So we grep stderr for any message + # that says an option was ignored or not supported. + # When given -MP, icc 7.0 and 7.1 complain thusly: + # icc: Command line warning: ignoring option '-M'; no argument required + # The diagnosis changed in icc 8.0: + # icc: Command line remark: option '-MP' not supported + if (grep 'ignoring option' conftest.err || + grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else + am_cv_CXX_dependencies_compiler_type=$depmode + break + fi + fi + done + + cd .. + rm -rf conftest.dir +else + am_cv_CXX_dependencies_compiler_type=none +fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CXX_dependencies_compiler_type" >&5 +$as_echo "$am_cv_CXX_dependencies_compiler_type" >&6; } +CXXDEPMODE=depmode=$am_cv_CXX_dependencies_compiler_type + + if + test "x$enable_dependency_tracking" != xno \ + && test "$am_cv_CXX_dependencies_compiler_type" = gcc3; then + am__fastdepCXX_TRUE= + am__fastdepCXX_FALSE='#' +else + am__fastdepCXX_TRUE='#' + am__fastdepCXX_FALSE= +fi + + +ac_ext=cpp +ac_cpp='$CXXCPP $CPPFLAGS' +ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_cxx_compiler_gnu + +case `pwd` in + *\ * | *\ *) + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5 +$as_echo "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;; +esac + + + +macro_version='2.4' +macro_revision='1.3293' + + + + + + + + + + + + + +ltmain="$ac_aux_dir/ltmain.sh" + +# Backslashify metacharacters that are still active within +# double-quoted strings. +sed_quote_subst='s/\(["`$\\]\)/\\\1/g' + +# Same as above, but do not quote variable references. +double_quote_subst='s/\(["`\\]\)/\\\1/g' + +# Sed substitution to delay expansion of an escaped shell variable in a +# double_quote_subst'ed string. +delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' + +# Sed substitution to delay expansion of an escaped single quote. +delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g' + +# Sed substitution to avoid accidental globbing in evaled expressions +no_glob_subst='s/\*/\\\*/g' + +ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' +ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO +ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to print strings" >&5 +$as_echo_n "checking how to print strings... " >&6; } +# Test print first, because it will be a builtin if present. +if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \ + test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then + ECHO='print -r --' +elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then + ECHO='printf %s\n' +else + # Use this function as a fallback that always works. + func_fallback_echo () + { + eval 'cat <<_LTECHO_EOF +$1 +_LTECHO_EOF' + } + ECHO='func_fallback_echo' +fi + +# func_echo_all arg... +# Invoke $ECHO with all args, space-separated. +func_echo_all () +{ + $ECHO "" +} + +case "$ECHO" in + printf*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: printf" >&5 +$as_echo "printf" >&6; } ;; + print*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: print -r" >&5 +$as_echo "print -r" >&6; } ;; + *) { $as_echo "$as_me:${as_lineno-$LINENO}: result: cat" >&5 +$as_echo "cat" >&6; } ;; +esac + + + + + + + + + + + + + + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. +set dummy ${ac_tool_prefix}gcc; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_CC="${ac_tool_prefix}gcc" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_CC"; then + ac_ct_CC=$CC + # Extract the first word of "gcc", so it can be a program name with args. +set dummy gcc; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_CC="gcc" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 +$as_echo "$ac_ct_CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_CC" = x; then + CC="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + CC=$ac_ct_CC + fi +else + CC="$ac_cv_prog_CC" +fi + +if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. +set dummy ${ac_tool_prefix}cc; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_CC="${ac_tool_prefix}cc" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + fi +fi +if test -z "$CC"; then + # Extract the first word of "cc", so it can be a program name with args. +set dummy cc; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else + ac_prog_rejected=no +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then + ac_prog_rejected=yes + continue + fi + ac_cv_prog_CC="cc" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +if test $ac_prog_rejected = yes; then + # We found a bogon in the path, so make sure we never use it. + set dummy $ac_cv_prog_CC + shift + if test $# != 0; then + # We chose a different compiler from the bogus one. + # However, it has the same basename, so the bogon will be chosen + # first if we set CC to just the basename; use the full file name. + shift + ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" + fi +fi +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then + for ac_prog in cl.exe + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. +set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_CC="$ac_tool_prefix$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$CC" && break + done +fi +if test -z "$CC"; then + ac_ct_CC=$CC + for ac_prog in cl.exe +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_CC="$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 +$as_echo "$ac_ct_CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$ac_ct_CC" && break +done + + if test "x$ac_ct_CC" = x; then + CC="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + CC=$ac_ct_CC + fi +fi + +fi + + +test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "no acceptable C compiler found in \$PATH +See \`config.log' for more details" "$LINENO" 5; } + +# Provide some information about the compiler. +$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 +set X $ac_compile +ac_compiler=$2 +for ac_option in --version -v -V -qversion; do + { { ac_try="$ac_compiler $ac_option >&5" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_compiler $ac_option >&5") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + sed '10a\ +... rest of stderr output deleted ... + 10q' conftest.err >conftest.er1 + cat conftest.er1 >&5 + fi + rm -f conftest.er1 conftest.err + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } +done + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5 +$as_echo_n "checking whether we are using the GNU C compiler... " >&6; } +if ${ac_cv_c_compiler_gnu+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ +#ifndef __GNUC__ + choke me +#endif + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_compiler_gnu=yes +else + ac_compiler_gnu=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +ac_cv_c_compiler_gnu=$ac_compiler_gnu + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5 +$as_echo "$ac_cv_c_compiler_gnu" >&6; } +if test $ac_compiler_gnu = yes; then + GCC=yes +else + GCC= +fi +ac_test_CFLAGS=${CFLAGS+set} +ac_save_CFLAGS=$CFLAGS +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5 +$as_echo_n "checking whether $CC accepts -g... " >&6; } +if ${ac_cv_prog_cc_g+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_save_c_werror_flag=$ac_c_werror_flag + ac_c_werror_flag=yes + ac_cv_prog_cc_g=no + CFLAGS="-g" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_prog_cc_g=yes +else + CFLAGS="" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + +else + ac_c_werror_flag=$ac_save_c_werror_flag + CFLAGS="-g" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_prog_cc_g=yes +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + ac_c_werror_flag=$ac_save_c_werror_flag +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5 +$as_echo "$ac_cv_prog_cc_g" >&6; } +if test "$ac_test_CFLAGS" = set; then + CFLAGS=$ac_save_CFLAGS +elif test $ac_cv_prog_cc_g = yes; then + if test "$GCC" = yes; then + CFLAGS="-g -O2" + else + CFLAGS="-g" + fi +else + if test "$GCC" = yes; then + CFLAGS="-O2" + else + CFLAGS= + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5 +$as_echo_n "checking for $CC option to accept ISO C89... " >&6; } +if ${ac_cv_prog_cc_c89+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_cv_prog_cc_c89=no +ac_save_CC=$CC +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include +#include +#include +/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ +struct buf { int x; }; +FILE * (*rcsopen) (struct buf *, struct stat *, int); +static char *e (p, i) + char **p; + int i; +{ + return p[i]; +} +static char *f (char * (*g) (char **, int), char **p, ...) +{ + char *s; + va_list v; + va_start (v,p); + s = g (p, va_arg (v,int)); + va_end (v); + return s; +} + +/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has + function prototypes and stuff, but not '\xHH' hex character constants. + These don't provoke an error unfortunately, instead are silently treated + as 'x'. The following induces an error, until -std is added to get + proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an + array size at least. It's necessary to write '\x00'==0 to get something + that's true only with -std. */ +int osf4_cc_array ['\x00' == 0 ? 1 : -1]; + +/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters + inside strings and character constants. */ +#define FOO(x) 'x' +int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; + +int test (int i, double x); +struct s1 {int (*f) (int a);}; +struct s2 {int (*f) (double a);}; +int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); +int argc; +char **argv; +int +main () +{ +return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; + ; + return 0; +} +_ACEOF +for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ + -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" +do + CC="$ac_save_CC $ac_arg" + if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_prog_cc_c89=$ac_arg +fi +rm -f core conftest.err conftest.$ac_objext + test "x$ac_cv_prog_cc_c89" != "xno" && break +done +rm -f conftest.$ac_ext +CC=$ac_save_CC + +fi +# AC_CACHE_VAL +case "x$ac_cv_prog_cc_c89" in + x) + { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 +$as_echo "none needed" >&6; } ;; + xno) + { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 +$as_echo "unsupported" >&6; } ;; + *) + CC="$CC $ac_cv_prog_cc_c89" + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 +$as_echo "$ac_cv_prog_cc_c89" >&6; } ;; +esac +if test "x$ac_cv_prog_cc_c89" != xno; then : + +fi + +ac_ext=cpp +ac_cpp='$CXXCPP $CPPFLAGS' +ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_cxx_compiler_gnu + +depcc="$CC" am_compiler_list= + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 +$as_echo_n "checking dependency style of $depcc... " >&6; } +if ${am_cv_CC_dependencies_compiler_type+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then + # We make a subdir and do the tests there. Otherwise we can end up + # making bogus files that we don't know about and never remove. For + # instance it was reported that on HP-UX the gcc test will end up + # making a dummy file named `D' -- because `-MD' means `put the output + # in D'. + mkdir conftest.dir + # Copy depcomp to subdir because otherwise we won't find it if we're + # using a relative directory. + cp "$am_depcomp" conftest.dir + cd conftest.dir + # We will build objects and dependencies in a subdirectory because + # it helps to detect inapplicable dependency modes. For instance + # both Tru64's cc and ICC support -MD to output dependencies as a + # side effect of compilation, but ICC will put the dependencies in + # the current directory while Tru64 will put them in the object + # directory. + mkdir sub + + am_cv_CC_dependencies_compiler_type=none + if test "$am_compiler_list" = ""; then + am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` + fi + am__universal=false + case " $depcc " in #( + *\ -arch\ *\ -arch\ *) am__universal=true ;; + esac + + for depmode in $am_compiler_list; do + # Setup a source with many dependencies, because some compilers + # like to wrap large dependency lists on column 80 (with \), and + # we should not choose a depcomp mode which is confused by this. + # + # We need to recreate these files for each test, as the compiler may + # overwrite some of them when testing with obscure command lines. + # This happens at least with the AIX C compiler. + : > sub/conftest.c + for i in 1 2 3 4 5 6; do + echo '#include "conftst'$i'.h"' >> sub/conftest.c + # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with + # Solaris 8's {/usr,}/bin/sh. + touch sub/conftst$i.h + done + echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf + + # We check with `-c' and `-o' for the sake of the "dashmstdout" + # mode. It turns out that the SunPro C++ compiler does not properly + # handle `-M -o', and we need to detect this. Also, some Intel + # versions had trouble with output in subdirs + am__obj=sub/conftest.${OBJEXT-o} + am__minus_obj="-o $am__obj" + case $depmode in + gcc) + # This depmode causes a compiler race in universal mode. + test "$am__universal" = false || continue + ;; + nosideeffect) + # after this tag, mechanisms are not by side-effect, so they'll + # only be used when explicitly requested + if test "x$enable_dependency_tracking" = xyes; then + continue + else + break + fi + ;; + msvisualcpp | msvcmsys) + # This compiler won't grok `-c -o', but also, the minuso test has + # not run yet. These depmodes are late enough in the game, and + # so weak that their functioning should not be impacted. + am__obj=conftest.${OBJEXT-o} + am__minus_obj= + ;; + none) break ;; + esac + if depmode=$depmode \ + source=sub/conftest.c object=$am__obj \ + depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ + $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ + >/dev/null 2>conftest.err && + grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && + grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && + grep $am__obj sub/conftest.Po > /dev/null 2>&1 && + ${MAKE-make} -s -f confmf > /dev/null 2>&1; then + # icc doesn't choke on unknown options, it will just issue warnings + # or remarks (even with -Werror). So we grep stderr for any message + # that says an option was ignored or not supported. + # When given -MP, icc 7.0 and 7.1 complain thusly: + # icc: Command line warning: ignoring option '-M'; no argument required + # The diagnosis changed in icc 8.0: + # icc: Command line remark: option '-MP' not supported + if (grep 'ignoring option' conftest.err || + grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else + am_cv_CC_dependencies_compiler_type=$depmode + break + fi + fi + done + + cd .. + rm -rf conftest.dir +else + am_cv_CC_dependencies_compiler_type=none +fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5 +$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; } +CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type + + if + test "x$enable_dependency_tracking" != xno \ + && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then + am__fastdepCC_TRUE= + am__fastdepCC_FALSE='#' +else + am__fastdepCC_TRUE='#' + am__fastdepCC_FALSE= +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5 +$as_echo_n "checking for a sed that does not truncate output... " >&6; } +if ${ac_cv_path_SED+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/ + for ac_i in 1 2 3 4 5 6 7; do + ac_script="$ac_script$as_nl$ac_script" + done + echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed + { ac_script=; unset ac_script;} + if test -z "$SED"; then + ac_path_SED_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in sed gsed; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_SED="$as_dir/$ac_prog$ac_exec_ext" + { test -f "$ac_path_SED" && $as_test_x "$ac_path_SED"; } || continue +# Check for GNU ac_path_SED and select it if it is found. + # Check for GNU $ac_path_SED +case `"$ac_path_SED" --version 2>&1` in +*GNU*) + ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;; +*) + ac_count=0 + $as_echo_n 0123456789 >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + $as_echo '' >> "conftest.nl" + "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + as_fn_arith $ac_count + 1 && ac_count=$as_val + if test $ac_count -gt ${ac_path_SED_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_SED="$ac_path_SED" + ac_path_SED_max=$ac_count + fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac + + $ac_path_SED_found && break 3 + done + done + done +IFS=$as_save_IFS + if test -z "$ac_cv_path_SED"; then + as_fn_error $? "no acceptable sed could be found in \$PATH" "$LINENO" 5 + fi +else + ac_cv_path_SED=$SED +fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5 +$as_echo "$ac_cv_path_SED" >&6; } + SED="$ac_cv_path_SED" + rm -f conftest.sed + +test -z "$SED" && SED=sed +Xsed="$SED -e 1s/^X//" + + + + + + + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5 +$as_echo_n "checking for grep that handles long lines and -e... " >&6; } +if ${ac_cv_path_GREP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -z "$GREP"; then + ac_path_GREP_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in grep ggrep; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" + { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue +# Check for GNU ac_path_GREP and select it if it is found. + # Check for GNU $ac_path_GREP +case `"$ac_path_GREP" --version 2>&1` in +*GNU*) + ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;; +*) + ac_count=0 + $as_echo_n 0123456789 >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + $as_echo 'GREP' >> "conftest.nl" + "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + as_fn_arith $ac_count + 1 && ac_count=$as_val + if test $ac_count -gt ${ac_path_GREP_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_GREP="$ac_path_GREP" + ac_path_GREP_max=$ac_count + fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac + + $ac_path_GREP_found && break 3 + done + done + done +IFS=$as_save_IFS + if test -z "$ac_cv_path_GREP"; then + as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 + fi +else + ac_cv_path_GREP=$GREP +fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5 +$as_echo "$ac_cv_path_GREP" >&6; } + GREP="$ac_cv_path_GREP" + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5 +$as_echo_n "checking for egrep... " >&6; } +if ${ac_cv_path_EGREP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 + then ac_cv_path_EGREP="$GREP -E" + else + if test -z "$EGREP"; then + ac_path_EGREP_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in egrep; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" + { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue +# Check for GNU ac_path_EGREP and select it if it is found. + # Check for GNU $ac_path_EGREP +case `"$ac_path_EGREP" --version 2>&1` in +*GNU*) + ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;; +*) + ac_count=0 + $as_echo_n 0123456789 >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + $as_echo 'EGREP' >> "conftest.nl" + "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + as_fn_arith $ac_count + 1 && ac_count=$as_val + if test $ac_count -gt ${ac_path_EGREP_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_EGREP="$ac_path_EGREP" + ac_path_EGREP_max=$ac_count + fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac + + $ac_path_EGREP_found && break 3 + done + done + done +IFS=$as_save_IFS + if test -z "$ac_cv_path_EGREP"; then + as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 + fi +else + ac_cv_path_EGREP=$EGREP +fi + + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5 +$as_echo "$ac_cv_path_EGREP" >&6; } + EGREP="$ac_cv_path_EGREP" + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for fgrep" >&5 +$as_echo_n "checking for fgrep... " >&6; } +if ${ac_cv_path_FGREP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1 + then ac_cv_path_FGREP="$GREP -F" + else + if test -z "$FGREP"; then + ac_path_FGREP_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in fgrep; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext" + { test -f "$ac_path_FGREP" && $as_test_x "$ac_path_FGREP"; } || continue +# Check for GNU ac_path_FGREP and select it if it is found. + # Check for GNU $ac_path_FGREP +case `"$ac_path_FGREP" --version 2>&1` in +*GNU*) + ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;; +*) + ac_count=0 + $as_echo_n 0123456789 >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + $as_echo 'FGREP' >> "conftest.nl" + "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + as_fn_arith $ac_count + 1 && ac_count=$as_val + if test $ac_count -gt ${ac_path_FGREP_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_FGREP="$ac_path_FGREP" + ac_path_FGREP_max=$ac_count + fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac + + $ac_path_FGREP_found && break 3 + done + done + done +IFS=$as_save_IFS + if test -z "$ac_cv_path_FGREP"; then + as_fn_error $? "no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 + fi +else + ac_cv_path_FGREP=$FGREP +fi + + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_FGREP" >&5 +$as_echo "$ac_cv_path_FGREP" >&6; } + FGREP="$ac_cv_path_FGREP" + + +test -z "$GREP" && GREP=grep + + + + + + + + + + + + + + + + + + + +# Check whether --with-gnu-ld was given. +if test "${with_gnu_ld+set}" = set; then : + withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes +else + with_gnu_ld=no +fi + +ac_prog=ld +if test "$GCC" = yes; then + # Check if gcc -print-prog-name=ld gives a path. + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5 +$as_echo_n "checking for ld used by $CC... " >&6; } + case $host in + *-*-mingw*) + # gcc leaves a trailing carriage return which upsets mingw + ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; + *) + ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; + esac + case $ac_prog in + # Accept absolute paths. + [\\/]* | ?:[\\/]*) + re_direlt='/[^/][^/]*/\.\./' + # Canonicalize the pathname of ld + ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'` + while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do + ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` + done + test -z "$LD" && LD="$ac_prog" + ;; + "") + # If it fails, then pretend we aren't using GCC. + ac_prog=ld + ;; + *) + # If it is relative, then search for the first ld in PATH. + with_gnu_ld=unknown + ;; + esac +elif test "$with_gnu_ld" = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5 +$as_echo_n "checking for GNU ld... " >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5 +$as_echo_n "checking for non-GNU ld... " >&6; } +fi +if ${lt_cv_path_LD+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -z "$LD"; then + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in $PATH; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then + lt_cv_path_LD="$ac_dir/$ac_prog" + # Check to see if the program is GNU ld. I'd rather use --version, + # but apparently some variants of GNU ld only accept -v. + # Break only if it was the GNU/non-GNU ld that we prefer. + case `"$lt_cv_path_LD" -v 2>&1 &5 +$as_echo "$LD" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi +test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5 +$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; } +if ${lt_cv_prog_gnu_ld+:} false; then : + $as_echo_n "(cached) " >&6 +else + # I'd rather use --version here, but apparently some GNU lds only accept -v. +case `$LD -v 2>&1 &5 +$as_echo "$lt_cv_prog_gnu_ld" >&6; } +with_gnu_ld=$lt_cv_prog_gnu_ld + + + + + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for BSD- or MS-compatible name lister (nm)" >&5 +$as_echo_n "checking for BSD- or MS-compatible name lister (nm)... " >&6; } +if ${lt_cv_path_NM+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$NM"; then + # Let the user override the test. + lt_cv_path_NM="$NM" +else + lt_nm_to_check="${ac_tool_prefix}nm" + if test -n "$ac_tool_prefix" && test "$build" = "$host"; then + lt_nm_to_check="$lt_nm_to_check nm" + fi + for lt_tmp_nm in $lt_nm_to_check; do + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + tmp_nm="$ac_dir/$lt_tmp_nm" + if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then + # Check to see if the nm accepts a BSD-compat flag. + # Adding the `sed 1q' prevents false positives on HP-UX, which says: + # nm: unknown option "B" ignored + # Tru64's nm complains that /dev/null is an invalid object file + case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in + */dev/null* | *'Invalid file or object type'*) + lt_cv_path_NM="$tmp_nm -B" + break + ;; + *) + case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in + */dev/null*) + lt_cv_path_NM="$tmp_nm -p" + break + ;; + *) + lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but + continue # so that we can try to find one that supports BSD flags + ;; + esac + ;; + esac + fi + done + IFS="$lt_save_ifs" + done + : ${lt_cv_path_NM=no} +fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5 +$as_echo "$lt_cv_path_NM" >&6; } +if test "$lt_cv_path_NM" != "no"; then + NM="$lt_cv_path_NM" +else + # Didn't find any BSD compatible name lister, look for dumpbin. + if test -n "$DUMPBIN"; then : + # Let the user override the test. + else + if test -n "$ac_tool_prefix"; then + for ac_prog in dumpbin "link -dump" + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. +set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_DUMPBIN+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$DUMPBIN"; then + ac_cv_prog_DUMPBIN="$DUMPBIN" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +DUMPBIN=$ac_cv_prog_DUMPBIN +if test -n "$DUMPBIN"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DUMPBIN" >&5 +$as_echo "$DUMPBIN" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$DUMPBIN" && break + done +fi +if test -z "$DUMPBIN"; then + ac_ct_DUMPBIN=$DUMPBIN + for ac_prog in dumpbin "link -dump" +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_DUMPBIN+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_DUMPBIN"; then + ac_cv_prog_ac_ct_DUMPBIN="$ac_ct_DUMPBIN" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_DUMPBIN="$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN +if test -n "$ac_ct_DUMPBIN"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DUMPBIN" >&5 +$as_echo "$ac_ct_DUMPBIN" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$ac_ct_DUMPBIN" && break +done + + if test "x$ac_ct_DUMPBIN" = x; then + DUMPBIN=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + DUMPBIN=$ac_ct_DUMPBIN + fi +fi + + case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in + *COFF*) + DUMPBIN="$DUMPBIN -symbols" + ;; + *) + DUMPBIN=: + ;; + esac + fi + + if test "$DUMPBIN" != ":"; then + NM="$DUMPBIN" + fi +fi +test -z "$NM" && NM=nm + + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the name lister ($NM) interface" >&5 +$as_echo_n "checking the name lister ($NM) interface... " >&6; } +if ${lt_cv_nm_interface+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_nm_interface="BSD nm" + echo "int some_variable = 0;" > conftest.$ac_ext + (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&5) + (eval "$ac_compile" 2>conftest.err) + cat conftest.err >&5 + (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&5) + (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) + cat conftest.err >&5 + (eval echo "\"\$as_me:$LINENO: output\"" >&5) + cat conftest.out >&5 + if $GREP 'External.*some_variable' conftest.out > /dev/null; then + lt_cv_nm_interface="MS dumpbin" + fi + rm -f conftest* +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_nm_interface" >&5 +$as_echo "$lt_cv_nm_interface" >&6; } + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ln -s works" >&5 +$as_echo_n "checking whether ln -s works... " >&6; } +LN_S=$as_ln_s +if test "$LN_S" = "ln -s"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, using $LN_S" >&5 +$as_echo "no, using $LN_S" >&6; } +fi + +# find the maximum length of command line arguments +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the maximum length of command line arguments" >&5 +$as_echo_n "checking the maximum length of command line arguments... " >&6; } +if ${lt_cv_sys_max_cmd_len+:} false; then : + $as_echo_n "(cached) " >&6 +else + i=0 + teststring="ABCD" + + case $build_os in + msdosdjgpp*) + # On DJGPP, this test can blow up pretty badly due to problems in libc + # (any single argument exceeding 2000 bytes causes a buffer overrun + # during glob expansion). Even if it were fixed, the result of this + # check would be larger than it should be. + lt_cv_sys_max_cmd_len=12288; # 12K is about right + ;; + + gnu*) + # Under GNU Hurd, this test is not required because there is + # no limit to the length of command line arguments. + # Libtool will interpret -1 as no limit whatsoever + lt_cv_sys_max_cmd_len=-1; + ;; + + cygwin* | mingw* | cegcc*) + # On Win9x/ME, this test blows up -- it succeeds, but takes + # about 5 minutes as the teststring grows exponentially. + # Worse, since 9x/ME are not pre-emptively multitasking, + # you end up with a "frozen" computer, even though with patience + # the test eventually succeeds (with a max line length of 256k). + # Instead, let's just punt: use the minimum linelength reported by + # all of the supported platforms: 8192 (on NT/2K/XP). + lt_cv_sys_max_cmd_len=8192; + ;; + + mint*) + # On MiNT this can take a long time and run out of memory. + lt_cv_sys_max_cmd_len=8192; + ;; + + amigaos*) + # On AmigaOS with pdksh, this test takes hours, literally. + # So we just punt and use a minimum line length of 8192. + lt_cv_sys_max_cmd_len=8192; + ;; + + netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) + # This has been around since 386BSD, at least. Likely further. + if test -x /sbin/sysctl; then + lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` + elif test -x /usr/sbin/sysctl; then + lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` + else + lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs + fi + # And add a safety zone + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` + ;; + + interix*) + # We know the value 262144 and hardcode it with a safety zone (like BSD) + lt_cv_sys_max_cmd_len=196608 + ;; + + osf*) + # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure + # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not + # nice to cause kernel panics so lets avoid the loop below. + # First set a reasonable default. + lt_cv_sys_max_cmd_len=16384 + # + if test -x /sbin/sysconfig; then + case `/sbin/sysconfig -q proc exec_disable_arg_limit` in + *1*) lt_cv_sys_max_cmd_len=-1 ;; + esac + fi + ;; + sco3.2v5*) + lt_cv_sys_max_cmd_len=102400 + ;; + sysv5* | sco5v6* | sysv4.2uw2*) + kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` + if test -n "$kargmax"; then + lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[ ]//'` + else + lt_cv_sys_max_cmd_len=32768 + fi + ;; + *) + lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` + if test -n "$lt_cv_sys_max_cmd_len"; then + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` + else + # Make teststring a little bigger before we do anything with it. + # a 1K string should be a reasonable start. + for i in 1 2 3 4 5 6 7 8 ; do + teststring=$teststring$teststring + done + SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} + # If test is not a shell built-in, we'll probably end up computing a + # maximum length that is only half of the actual maximum length, but + # we can't tell. + while { test "X"`func_fallback_echo "$teststring$teststring" 2>/dev/null` \ + = "X$teststring$teststring"; } >/dev/null 2>&1 && + test $i != 17 # 1/2 MB should be enough + do + i=`expr $i + 1` + teststring=$teststring$teststring + done + # Only check the string length outside the loop. + lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1` + teststring= + # Add a significant safety factor because C++ compilers can tack on + # massive amounts of additional arguments before passing them to the + # linker. It appears as though 1/2 is a usable value. + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` + fi + ;; + esac + +fi + +if test -n $lt_cv_sys_max_cmd_len ; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sys_max_cmd_len" >&5 +$as_echo "$lt_cv_sys_max_cmd_len" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: none" >&5 +$as_echo "none" >&6; } +fi +max_cmd_len=$lt_cv_sys_max_cmd_len + + + + + + +: ${CP="cp -f"} +: ${MV="mv -f"} +: ${RM="rm -f"} + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands some XSI constructs" >&5 +$as_echo_n "checking whether the shell understands some XSI constructs... " >&6; } +# Try some XSI features +xsi_shell=no +( _lt_dummy="a/b/c" + test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \ + = c,a/b,b/c, \ + && eval 'test $(( 1 + 1 )) -eq 2 \ + && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \ + && xsi_shell=yes +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xsi_shell" >&5 +$as_echo "$xsi_shell" >&6; } + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands \"+=\"" >&5 +$as_echo_n "checking whether the shell understands \"+=\"... " >&6; } +lt_shell_append=no +( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \ + >/dev/null 2>&1 \ + && lt_shell_append=yes +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_shell_append" >&5 +$as_echo "$lt_shell_append" >&6; } + + +if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then + lt_unset=unset +else + lt_unset=false +fi + + + + + +# test EBCDIC or ASCII +case `echo X|tr X '\101'` in + A) # ASCII based system + # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr + lt_SP2NL='tr \040 \012' + lt_NL2SP='tr \015\012 \040\040' + ;; + *) # EBCDIC based system + lt_SP2NL='tr \100 \n' + lt_NL2SP='tr \r\n \100\100' + ;; +esac + + + + + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to $host format" >&5 +$as_echo_n "checking how to convert $build file names to $host format... " >&6; } +if ${lt_cv_to_host_file_cmd+:} false; then : + $as_echo_n "(cached) " >&6 +else + case $host in + *-*-mingw* ) + case $build in + *-*-mingw* ) # actually msys + lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32 + ;; + *-*-cygwin* ) + lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32 + ;; + * ) # otherwise, assume *nix + lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32 + ;; + esac + ;; + *-*-cygwin* ) + case $build in + *-*-mingw* ) # actually msys + lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin + ;; + *-*-cygwin* ) + lt_cv_to_host_file_cmd=func_convert_file_noop + ;; + * ) # otherwise, assume *nix + lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin + ;; + esac + ;; + * ) # unhandled hosts (and "normal" native builds) + lt_cv_to_host_file_cmd=func_convert_file_noop + ;; +esac + +fi + +to_host_file_cmd=$lt_cv_to_host_file_cmd +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_host_file_cmd" >&5 +$as_echo "$lt_cv_to_host_file_cmd" >&6; } + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to toolchain format" >&5 +$as_echo_n "checking how to convert $build file names to toolchain format... " >&6; } +if ${lt_cv_to_tool_file_cmd+:} false; then : + $as_echo_n "(cached) " >&6 +else + #assume ordinary cross tools, or native build. +lt_cv_to_tool_file_cmd=func_convert_file_noop +case $host in + *-*-mingw* ) + case $build in + *-*-mingw* ) # actually msys + lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32 + ;; + esac + ;; +esac + +fi + +to_tool_file_cmd=$lt_cv_to_tool_file_cmd +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_tool_file_cmd" >&5 +$as_echo "$lt_cv_to_tool_file_cmd" >&6; } + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5 +$as_echo_n "checking for $LD option to reload object files... " >&6; } +if ${lt_cv_ld_reload_flag+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_ld_reload_flag='-r' +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_reload_flag" >&5 +$as_echo "$lt_cv_ld_reload_flag" >&6; } +reload_flag=$lt_cv_ld_reload_flag +case $reload_flag in +"" | " "*) ;; +*) reload_flag=" $reload_flag" ;; +esac +reload_cmds='$LD$reload_flag -o $output$reload_objs' +case $host_os in + cygwin* | mingw* | pw32* | cegcc*) + if test "$GCC" != yes; then + reload_cmds=false + fi + ;; + darwin*) + if test "$GCC" = yes; then + reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs' + else + reload_cmds='$LD$reload_flag -o $output$reload_objs' + fi + ;; +esac + + + + + + + + + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args. +set dummy ${ac_tool_prefix}objdump; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_OBJDUMP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$OBJDUMP"; then + ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +OBJDUMP=$ac_cv_prog_OBJDUMP +if test -n "$OBJDUMP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5 +$as_echo "$OBJDUMP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_OBJDUMP"; then + ac_ct_OBJDUMP=$OBJDUMP + # Extract the first word of "objdump", so it can be a program name with args. +set dummy objdump; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_OBJDUMP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_OBJDUMP"; then + ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_OBJDUMP="objdump" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP +if test -n "$ac_ct_OBJDUMP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5 +$as_echo "$ac_ct_OBJDUMP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_OBJDUMP" = x; then + OBJDUMP="false" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + OBJDUMP=$ac_ct_OBJDUMP + fi +else + OBJDUMP="$ac_cv_prog_OBJDUMP" +fi + +test -z "$OBJDUMP" && OBJDUMP=objdump + + + + + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to recognize dependent libraries" >&5 +$as_echo_n "checking how to recognize dependent libraries... " >&6; } +if ${lt_cv_deplibs_check_method+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_file_magic_cmd='$MAGIC_CMD' +lt_cv_file_magic_test_file= +lt_cv_deplibs_check_method='unknown' +# Need to set the preceding variable on all platforms that support +# interlibrary dependencies. +# 'none' -- dependencies not supported. +# `unknown' -- same as none, but documents that we really don't know. +# 'pass_all' -- all dependencies passed with no checks. +# 'test_compile' -- check by making test program. +# 'file_magic [[regex]]' -- check by looking for files in library path +# which responds to the $file_magic_cmd with a given extended regex. +# If you have `file' or equivalent on your system and you're not sure +# whether `pass_all' will *always* work, you probably want this one. + +case $host_os in +aix[4-9]*) + lt_cv_deplibs_check_method=pass_all + ;; + +beos*) + lt_cv_deplibs_check_method=pass_all + ;; + +bsdi[45]*) + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)' + lt_cv_file_magic_cmd='/usr/bin/file -L' + lt_cv_file_magic_test_file=/shlib/libc.so + ;; + +cygwin*) + # func_win32_libid is a shell function defined in ltmain.sh + lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' + lt_cv_file_magic_cmd='func_win32_libid' + ;; + +mingw* | pw32*) + # Base MSYS/MinGW do not provide the 'file' command needed by + # func_win32_libid shell function, so use a weaker test based on 'objdump', + # unless we find 'file', for example because we are cross-compiling. + # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin. + if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then + lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' + lt_cv_file_magic_cmd='func_win32_libid' + else + # Keep this pattern in sync with the one in func_win32_libid. + lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' + lt_cv_file_magic_cmd='$OBJDUMP -f' + fi + ;; + +cegcc*) + # use the weaker test based on 'objdump'. See mingw*. + lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?' + lt_cv_file_magic_cmd='$OBJDUMP -f' + ;; + +darwin* | rhapsody*) + lt_cv_deplibs_check_method=pass_all + ;; + +freebsd* | dragonfly*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then + case $host_cpu in + i*86 ) + # Not sure whether the presence of OpenBSD here was a mistake. + # Let's accept both of them until this is cleared up. + lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` + ;; + esac + else + lt_cv_deplibs_check_method=pass_all + fi + ;; + +gnu*) + lt_cv_deplibs_check_method=pass_all + ;; + +haiku*) + lt_cv_deplibs_check_method=pass_all + ;; + +hpux10.20* | hpux11*) + lt_cv_file_magic_cmd=/usr/bin/file + case $host_cpu in + ia64*) + lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64' + lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so + ;; + hppa*64*) + lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]' + lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl + ;; + *) + lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9]\.[0-9]) shared library' + lt_cv_file_magic_test_file=/usr/lib/libc.sl + ;; + esac + ;; + +interix[3-9]*) + # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$' + ;; + +irix5* | irix6* | nonstopux*) + case $LD in + *-32|*"-32 ") libmagic=32-bit;; + *-n32|*"-n32 ") libmagic=N32;; + *-64|*"-64 ") libmagic=64-bit;; + *) libmagic=never-match;; + esac + lt_cv_deplibs_check_method=pass_all + ;; + +# This must be Linux ELF. +linux* | k*bsd*-gnu | kopensolaris*-gnu) + lt_cv_deplibs_check_method=pass_all + ;; + +netbsd* | netbsdelf*-gnu) + if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' + else + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$' + fi + ;; + +newos6*) + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=/usr/lib/libnls.so + ;; + +*nto* | *qnx*) + lt_cv_deplibs_check_method=pass_all + ;; + +openbsd*) + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$' + else + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' + fi + ;; + +osf3* | osf4* | osf5*) + lt_cv_deplibs_check_method=pass_all + ;; + +rdos*) + lt_cv_deplibs_check_method=pass_all + ;; + +solaris*) + lt_cv_deplibs_check_method=pass_all + ;; + +sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) + lt_cv_deplibs_check_method=pass_all + ;; + +sysv4 | sysv4.3*) + case $host_vendor in + motorola) + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]' + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` + ;; + ncr) + lt_cv_deplibs_check_method=pass_all + ;; + sequent) + lt_cv_file_magic_cmd='/bin/file' + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' + ;; + sni) + lt_cv_file_magic_cmd='/bin/file' + lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib" + lt_cv_file_magic_test_file=/lib/libc.so + ;; + siemens) + lt_cv_deplibs_check_method=pass_all + ;; + pc) + lt_cv_deplibs_check_method=pass_all + ;; + esac + ;; + +tpf*) + lt_cv_deplibs_check_method=pass_all + ;; +esac + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5 +$as_echo "$lt_cv_deplibs_check_method" >&6; } + +file_magic_glob= +want_nocaseglob=no +if test "$build" = "$host"; then + case $host_os in + mingw* | pw32*) + if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then + want_nocaseglob=yes + else + file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[\1]\/[\1]\/g;/g"` + fi + ;; + esac +fi + +file_magic_cmd=$lt_cv_file_magic_cmd +deplibs_check_method=$lt_cv_deplibs_check_method +test -z "$deplibs_check_method" && deplibs_check_method=unknown + + + + + + + + + + + + + + + + + + + + + + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args. +set dummy ${ac_tool_prefix}dlltool; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_DLLTOOL+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$DLLTOOL"; then + ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +DLLTOOL=$ac_cv_prog_DLLTOOL +if test -n "$DLLTOOL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5 +$as_echo "$DLLTOOL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_DLLTOOL"; then + ac_ct_DLLTOOL=$DLLTOOL + # Extract the first word of "dlltool", so it can be a program name with args. +set dummy dlltool; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_DLLTOOL+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_DLLTOOL"; then + ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_DLLTOOL="dlltool" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL +if test -n "$ac_ct_DLLTOOL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5 +$as_echo "$ac_ct_DLLTOOL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_DLLTOOL" = x; then + DLLTOOL="false" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + DLLTOOL=$ac_ct_DLLTOOL + fi +else + DLLTOOL="$ac_cv_prog_DLLTOOL" +fi + +test -z "$DLLTOOL" && DLLTOOL=dlltool + + + + + + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to associate runtime and link libraries" >&5 +$as_echo_n "checking how to associate runtime and link libraries... " >&6; } +if ${lt_cv_sharedlib_from_linklib_cmd+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_sharedlib_from_linklib_cmd='unknown' + +case $host_os in +cygwin* | mingw* | pw32* | cegcc*) + # two different shell functions defined in ltmain.sh + # decide which to use based on capabilities of $DLLTOOL + case `$DLLTOOL --help 2>&1` in + *--identify-strict*) + lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib + ;; + *) + lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback + ;; + esac + ;; +*) + # fallback: assume linklib IS sharedlib + lt_cv_sharedlib_from_linklib_cmd="$ECHO" + ;; +esac + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sharedlib_from_linklib_cmd" >&5 +$as_echo "$lt_cv_sharedlib_from_linklib_cmd" >&6; } +sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd +test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO + + + + + + + + +if test -n "$ac_tool_prefix"; then + for ac_prog in ar + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. +set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_AR+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$AR"; then + ac_cv_prog_AR="$AR" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_AR="$ac_tool_prefix$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +AR=$ac_cv_prog_AR +if test -n "$AR"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5 +$as_echo "$AR" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$AR" && break + done +fi +if test -z "$AR"; then + ac_ct_AR=$AR + for ac_prog in ar +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_AR+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_AR"; then + ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_AR="$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_AR=$ac_cv_prog_ac_ct_AR +if test -n "$ac_ct_AR"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5 +$as_echo "$ac_ct_AR" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$ac_ct_AR" && break +done + + if test "x$ac_ct_AR" = x; then + AR="false" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + AR=$ac_ct_AR + fi +fi + +: ${AR=ar} +: ${AR_FLAGS=cru} + + + + + + + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for archiver @FILE support" >&5 +$as_echo_n "checking for archiver @FILE support... " >&6; } +if ${lt_cv_ar_at_file+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_ar_at_file=no + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_cxx_try_compile "$LINENO"; then : + echo conftest.$ac_objext > conftest.lst + lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&5' + { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5 + (eval $lt_ar_try) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + if test "$ac_status" -eq 0; then + # Ensure the archiver fails upon bogus file names. + rm -f conftest.$ac_objext libconftest.a + { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5 + (eval $lt_ar_try) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + if test "$ac_status" -ne 0; then + lt_cv_ar_at_file=@ + fi + fi + rm -f conftest.* libconftest.a + +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ar_at_file" >&5 +$as_echo "$lt_cv_ar_at_file" >&6; } + +if test "x$lt_cv_ar_at_file" = xno; then + archiver_list_spec= +else + archiver_list_spec=$lt_cv_ar_at_file +fi + + + + + + + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. +set dummy ${ac_tool_prefix}strip; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_STRIP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$STRIP"; then + ac_cv_prog_STRIP="$STRIP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_STRIP="${ac_tool_prefix}strip" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +STRIP=$ac_cv_prog_STRIP +if test -n "$STRIP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 +$as_echo "$STRIP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_STRIP"; then + ac_ct_STRIP=$STRIP + # Extract the first word of "strip", so it can be a program name with args. +set dummy strip; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_STRIP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_STRIP"; then + ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_STRIP="strip" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP +if test -n "$ac_ct_STRIP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 +$as_echo "$ac_ct_STRIP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_STRIP" = x; then + STRIP=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + STRIP=$ac_ct_STRIP + fi +else + STRIP="$ac_cv_prog_STRIP" +fi + +test -z "$STRIP" && STRIP=: + + + + + + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. +set dummy ${ac_tool_prefix}ranlib; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_RANLIB+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$RANLIB"; then + ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +RANLIB=$ac_cv_prog_RANLIB +if test -n "$RANLIB"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5 +$as_echo "$RANLIB" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_RANLIB"; then + ac_ct_RANLIB=$RANLIB + # Extract the first word of "ranlib", so it can be a program name with args. +set dummy ranlib; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_RANLIB+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_RANLIB"; then + ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_RANLIB="ranlib" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB +if test -n "$ac_ct_RANLIB"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5 +$as_echo "$ac_ct_RANLIB" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_RANLIB" = x; then + RANLIB=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + RANLIB=$ac_ct_RANLIB + fi +else + RANLIB="$ac_cv_prog_RANLIB" +fi + +test -z "$RANLIB" && RANLIB=: + + + + + + +# Determine commands to create old-style static archives. +old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs' +old_postinstall_cmds='chmod 644 $oldlib' +old_postuninstall_cmds= + +if test -n "$RANLIB"; then + case $host_os in + openbsd*) + old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib" + ;; + *) + old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib" + ;; + esac + old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" +fi + +case $host_os in + darwin*) + lock_old_archive_extraction=yes ;; + *) + lock_old_archive_extraction=no ;; +esac + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +# If no C compiler was specified, use CC. +LTCC=${LTCC-"$CC"} + +# If no C compiler flags were specified, use CFLAGS. +LTCFLAGS=${LTCFLAGS-"$CFLAGS"} + +# Allow CC to be a program name with arguments. +compiler=$CC + + +# Check for command to grab the raw symbol name followed by C symbol from nm. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking command to parse $NM output from $compiler object" >&5 +$as_echo_n "checking command to parse $NM output from $compiler object... " >&6; } +if ${lt_cv_sys_global_symbol_pipe+:} false; then : + $as_echo_n "(cached) " >&6 +else + +# These are sane defaults that work on at least a few old systems. +# [They come from Ultrix. What could be older than Ultrix?!! ;)] + +# Character class describing NM global symbol codes. +symcode='[BCDEGRST]' + +# Regexp to match symbols that can be accessed directly from C. +sympat='\([_A-Za-z][_A-Za-z0-9]*\)' + +# Define system-specific variables. +case $host_os in +aix*) + symcode='[BCDT]' + ;; +cygwin* | mingw* | pw32* | cegcc*) + symcode='[ABCDGISTW]' + ;; +hpux*) + if test "$host_cpu" = ia64; then + symcode='[ABCDEGRST]' + fi + ;; +irix* | nonstopux*) + symcode='[BCDEGRST]' + ;; +osf*) + symcode='[BCDEGQRST]' + ;; +solaris*) + symcode='[BDRT]' + ;; +sco3.2v5*) + symcode='[DT]' + ;; +sysv4.2uw2*) + symcode='[DT]' + ;; +sysv5* | sco5v6* | unixware* | OpenUNIX*) + symcode='[ABDT]' + ;; +sysv4) + symcode='[DFNSTU]' + ;; +esac + +# If we're using GNU nm, then use its standard symbol codes. +case `$NM -V 2>&1` in +*GNU* | *'with BFD'*) + symcode='[ABCDGIRSTW]' ;; +esac + +# Transform an extracted symbol line into a proper C declaration. +# Some systems (esp. on ia64) link data and code symbols differently, +# so use this general approach. +lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" + +# Transform an extracted symbol line into symbol name and symbol address +lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\)[ ]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (void *) \&\2},/p'" +lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\)[ ]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"lib\2\", (void *) \&\2},/p'" + +# Handle CRLF in mingw tool chain +opt_cr= +case $build_os in +mingw*) + opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp + ;; +esac + +# Try without a prefix underscore, then with it. +for ac_symprfx in "" "_"; do + + # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. + symxfrm="\\1 $ac_symprfx\\2 \\2" + + # Write the raw and C identifiers. + if test "$lt_cv_nm_interface" = "MS dumpbin"; then + # Fake it for dumpbin and say T for any non-static function + # and D for any global variable. + # Also find C++ and __fastcall symbols from MSVC++, + # which start with @ or ?. + lt_cv_sys_global_symbol_pipe="$AWK '"\ +" {last_section=section; section=\$ 3};"\ +" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\ +" \$ 0!~/External *\|/{next};"\ +" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\ +" {if(hide[section]) next};"\ +" {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\ +" {split(\$ 0, a, /\||\r/); split(a[2], s)};"\ +" s[1]~/^[@?]/{print s[1], s[1]; next};"\ +" s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\ +" ' prfx=^$ac_symprfx" + else + lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" + fi + lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'" + + # Check to see that the pipe works correctly. + pipe_works=no + + rm -f conftest* + cat > conftest.$ac_ext <<_LT_EOF +#ifdef __cplusplus +extern "C" { +#endif +char nm_test_var; +void nm_test_func(void); +void nm_test_func(void){} +#ifdef __cplusplus +} +#endif +int main(){nm_test_var='a';nm_test_func();return(0);} +_LT_EOF + + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + # Now try to grab the symbols. + nlist=conftest.nm + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist\""; } >&5 + (eval $NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && test -s "$nlist"; then + # Try sorting and uniquifying the output. + if sort "$nlist" | uniq > "$nlist"T; then + mv -f "$nlist"T "$nlist" + else + rm -f "$nlist"T + fi + + # Make sure that we snagged all the symbols we need. + if $GREP ' nm_test_var$' "$nlist" >/dev/null; then + if $GREP ' nm_test_func$' "$nlist" >/dev/null; then + cat <<_LT_EOF > conftest.$ac_ext +/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ +#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE) +/* DATA imports from DLLs on WIN32 con't be const, because runtime + relocations are performed -- see ld's documentation on pseudo-relocs. */ +# define LT_DLSYM_CONST +#elif defined(__osf__) +/* This system does not cope well with relocations in const data. */ +# define LT_DLSYM_CONST +#else +# define LT_DLSYM_CONST const +#endif + +#ifdef __cplusplus +extern "C" { +#endif + +_LT_EOF + # Now generate the symbol file. + eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext' + + cat <<_LT_EOF >> conftest.$ac_ext + +/* The mapping between symbol names and symbols. */ +LT_DLSYM_CONST struct { + const char *name; + void *address; +} +lt__PROGRAM__LTX_preloaded_symbols[] = +{ + { "@PROGRAM@", (void *) 0 }, +_LT_EOF + $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext + cat <<\_LT_EOF >> conftest.$ac_ext + {0, (void *) 0} +}; + +/* This works around a problem in FreeBSD linker */ +#ifdef FREEBSD_WORKAROUND +static const void *lt_preloaded_setup() { + return lt__PROGRAM__LTX_preloaded_symbols; +} +#endif + +#ifdef __cplusplus +} +#endif +_LT_EOF + # Now try linking the two files. + mv conftest.$ac_objext conftstm.$ac_objext + lt_globsym_save_LIBS=$LIBS + lt_globsym_save_CFLAGS=$CFLAGS + LIBS="conftstm.$ac_objext" + CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag" + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 + (eval $ac_link) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && test -s conftest${ac_exeext}; then + pipe_works=yes + fi + LIBS=$lt_globsym_save_LIBS + CFLAGS=$lt_globsym_save_CFLAGS + else + echo "cannot find nm_test_func in $nlist" >&5 + fi + else + echo "cannot find nm_test_var in $nlist" >&5 + fi + else + echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5 + fi + else + echo "$progname: failed program was:" >&5 + cat conftest.$ac_ext >&5 + fi + rm -rf conftest* conftst* + + # Do not use the global_symbol_pipe unless it works. + if test "$pipe_works" = yes; then + break + else + lt_cv_sys_global_symbol_pipe= + fi +done + +fi + +if test -z "$lt_cv_sys_global_symbol_pipe"; then + lt_cv_sys_global_symbol_to_cdecl= +fi +if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: failed" >&5 +$as_echo "failed" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5 +$as_echo "ok" >&6; } +fi + +# Response file support. +if test "$lt_cv_nm_interface" = "MS dumpbin"; then + nm_file_list_spec='@' +elif $NM --help 2>/dev/null | grep '[@]FILE' >/dev/null; then + nm_file_list_spec='@' +fi + + + + + + + + + + + + + + + + + + + + + + + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for sysroot" >&5 +$as_echo_n "checking for sysroot... " >&6; } + +# Check whether --with-sysroot was given. +if test "${with_sysroot+set}" = set; then : + withval=$with_sysroot; +else + with_sysroot=no +fi + + +lt_sysroot= +case ${with_sysroot} in #( + yes) + if test "$GCC" = yes; then + lt_sysroot=`$CC --print-sysroot 2>/dev/null` + fi + ;; #( + /*) + lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"` + ;; #( + no|'') + ;; #( + *) + { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${with_sysroot}" >&5 +$as_echo "${with_sysroot}" >&6; } + as_fn_error $? "The sysroot must be an absolute path." "$LINENO" 5 + ;; +esac + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${lt_sysroot:-no}" >&5 +$as_echo "${lt_sysroot:-no}" >&6; } + + + + + + +# Check whether --enable-libtool-lock was given. +if test "${enable_libtool_lock+set}" = set; then : + enableval=$enable_libtool_lock; +fi + +test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes + +# Some flags need to be propagated to the compiler or linker for good +# libtool support. +case $host in +ia64-*-hpux*) + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + case `/usr/bin/file conftest.$ac_objext` in + *ELF-32*) + HPUX_IA64_MODE="32" + ;; + *ELF-64*) + HPUX_IA64_MODE="64" + ;; + esac + fi + rm -rf conftest* + ;; +*-*-irix6*) + # Find out which ABI we are using. + echo '#line '$LINENO' "configure"' > conftest.$ac_ext + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + if test "$lt_cv_prog_gnu_ld" = yes; then + case `/usr/bin/file conftest.$ac_objext` in + *32-bit*) + LD="${LD-ld} -melf32bsmip" + ;; + *N32*) + LD="${LD-ld} -melf32bmipn32" + ;; + *64-bit*) + LD="${LD-ld} -melf64bmip" + ;; + esac + else + case `/usr/bin/file conftest.$ac_objext` in + *32-bit*) + LD="${LD-ld} -32" + ;; + *N32*) + LD="${LD-ld} -n32" + ;; + *64-bit*) + LD="${LD-ld} -64" + ;; + esac + fi + fi + rm -rf conftest* + ;; + +x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \ +s390*-*linux*|s390*-*tpf*|sparc*-*linux*) + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + case `/usr/bin/file conftest.o` in + *32-bit*) + case $host in + x86_64-*kfreebsd*-gnu) + LD="${LD-ld} -m elf_i386_fbsd" + ;; + x86_64-*linux*) + LD="${LD-ld} -m elf_i386" + ;; + ppc64-*linux*|powerpc64-*linux*) + LD="${LD-ld} -m elf32ppclinux" + ;; + s390x-*linux*) + LD="${LD-ld} -m elf_s390" + ;; + sparc64-*linux*) + LD="${LD-ld} -m elf32_sparc" + ;; + esac + ;; + *64-bit*) + case $host in + x86_64-*kfreebsd*-gnu) + LD="${LD-ld} -m elf_x86_64_fbsd" + ;; + x86_64-*linux*) + LD="${LD-ld} -m elf_x86_64" + ;; + ppc*-*linux*|powerpc*-*linux*) + LD="${LD-ld} -m elf64ppc" + ;; + s390*-*linux*|s390*-*tpf*) + LD="${LD-ld} -m elf64_s390" + ;; + sparc*-*linux*) + LD="${LD-ld} -m elf64_sparc" + ;; + esac + ;; + esac + fi + rm -rf conftest* + ;; + +*-*-sco3.2v5*) + # On SCO OpenServer 5, we need -belf to get full-featured binaries. + SAVE_CFLAGS="$CFLAGS" + CFLAGS="$CFLAGS -belf" + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler needs -belf" >&5 +$as_echo_n "checking whether the C compiler needs -belf... " >&6; } +if ${lt_cv_cc_needs_belf+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + lt_cv_cc_needs_belf=yes +else + lt_cv_cc_needs_belf=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_cc_needs_belf" >&5 +$as_echo "$lt_cv_cc_needs_belf" >&6; } + if test x"$lt_cv_cc_needs_belf" != x"yes"; then + # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf + CFLAGS="$SAVE_CFLAGS" + fi + ;; +sparc*-*solaris*) + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + case `/usr/bin/file conftest.o` in + *64-bit*) + case $lt_cv_prog_gnu_ld in + yes*) LD="${LD-ld} -m elf64_sparc" ;; + *) + if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then + LD="${LD-ld} -64" + fi + ;; + esac + ;; + esac + fi + rm -rf conftest* + ;; +esac + +need_locks="$enable_libtool_lock" + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}mt", so it can be a program name with args. +set dummy ${ac_tool_prefix}mt; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_MANIFEST_TOOL+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$MANIFEST_TOOL"; then + ac_cv_prog_MANIFEST_TOOL="$MANIFEST_TOOL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_MANIFEST_TOOL="${ac_tool_prefix}mt" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +MANIFEST_TOOL=$ac_cv_prog_MANIFEST_TOOL +if test -n "$MANIFEST_TOOL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MANIFEST_TOOL" >&5 +$as_echo "$MANIFEST_TOOL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_MANIFEST_TOOL"; then + ac_ct_MANIFEST_TOOL=$MANIFEST_TOOL + # Extract the first word of "mt", so it can be a program name with args. +set dummy mt; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_MANIFEST_TOOL+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_MANIFEST_TOOL"; then + ac_cv_prog_ac_ct_MANIFEST_TOOL="$ac_ct_MANIFEST_TOOL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_MANIFEST_TOOL="mt" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_MANIFEST_TOOL=$ac_cv_prog_ac_ct_MANIFEST_TOOL +if test -n "$ac_ct_MANIFEST_TOOL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_MANIFEST_TOOL" >&5 +$as_echo "$ac_ct_MANIFEST_TOOL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_MANIFEST_TOOL" = x; then + MANIFEST_TOOL=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + MANIFEST_TOOL=$ac_ct_MANIFEST_TOOL + fi +else + MANIFEST_TOOL="$ac_cv_prog_MANIFEST_TOOL" +fi + +test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $MANIFEST_TOOL is a manifest tool" >&5 +$as_echo_n "checking if $MANIFEST_TOOL is a manifest tool... " >&6; } +if ${lt_cv_path_mainfest_tool+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_path_mainfest_tool=no + echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&5 + $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out + cat conftest.err >&5 + if $GREP 'Manifest Tool' conftest.out > /dev/null; then + lt_cv_path_mainfest_tool=yes + fi + rm -f conftest* +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_mainfest_tool" >&5 +$as_echo "$lt_cv_path_mainfest_tool" >&6; } +if test "x$lt_cv_path_mainfest_tool" != xyes; then + MANIFEST_TOOL=: +fi + + + + + + + case $host_os in + rhapsody* | darwin*) + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args. +set dummy ${ac_tool_prefix}dsymutil; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_DSYMUTIL+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$DSYMUTIL"; then + ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +DSYMUTIL=$ac_cv_prog_DSYMUTIL +if test -n "$DSYMUTIL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DSYMUTIL" >&5 +$as_echo "$DSYMUTIL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_DSYMUTIL"; then + ac_ct_DSYMUTIL=$DSYMUTIL + # Extract the first word of "dsymutil", so it can be a program name with args. +set dummy dsymutil; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_DSYMUTIL+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_DSYMUTIL"; then + ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_DSYMUTIL="dsymutil" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL +if test -n "$ac_ct_DSYMUTIL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DSYMUTIL" >&5 +$as_echo "$ac_ct_DSYMUTIL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_DSYMUTIL" = x; then + DSYMUTIL=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + DSYMUTIL=$ac_ct_DSYMUTIL + fi +else + DSYMUTIL="$ac_cv_prog_DSYMUTIL" +fi + + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args. +set dummy ${ac_tool_prefix}nmedit; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_NMEDIT+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$NMEDIT"; then + ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +NMEDIT=$ac_cv_prog_NMEDIT +if test -n "$NMEDIT"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NMEDIT" >&5 +$as_echo "$NMEDIT" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_NMEDIT"; then + ac_ct_NMEDIT=$NMEDIT + # Extract the first word of "nmedit", so it can be a program name with args. +set dummy nmedit; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_NMEDIT+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_NMEDIT"; then + ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_NMEDIT="nmedit" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT +if test -n "$ac_ct_NMEDIT"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_NMEDIT" >&5 +$as_echo "$ac_ct_NMEDIT" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_NMEDIT" = x; then + NMEDIT=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + NMEDIT=$ac_ct_NMEDIT + fi +else + NMEDIT="$ac_cv_prog_NMEDIT" +fi + + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args. +set dummy ${ac_tool_prefix}lipo; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_LIPO+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$LIPO"; then + ac_cv_prog_LIPO="$LIPO" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_LIPO="${ac_tool_prefix}lipo" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +LIPO=$ac_cv_prog_LIPO +if test -n "$LIPO"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIPO" >&5 +$as_echo "$LIPO" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_LIPO"; then + ac_ct_LIPO=$LIPO + # Extract the first word of "lipo", so it can be a program name with args. +set dummy lipo; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_LIPO+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_LIPO"; then + ac_cv_prog_ac_ct_LIPO="$ac_ct_LIPO" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_LIPO="lipo" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO +if test -n "$ac_ct_LIPO"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_LIPO" >&5 +$as_echo "$ac_ct_LIPO" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_LIPO" = x; then + LIPO=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + LIPO=$ac_ct_LIPO + fi +else + LIPO="$ac_cv_prog_LIPO" +fi + + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args. +set dummy ${ac_tool_prefix}otool; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_OTOOL+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$OTOOL"; then + ac_cv_prog_OTOOL="$OTOOL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_OTOOL="${ac_tool_prefix}otool" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +OTOOL=$ac_cv_prog_OTOOL +if test -n "$OTOOL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL" >&5 +$as_echo "$OTOOL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_OTOOL"; then + ac_ct_OTOOL=$OTOOL + # Extract the first word of "otool", so it can be a program name with args. +set dummy otool; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_OTOOL+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_OTOOL"; then + ac_cv_prog_ac_ct_OTOOL="$ac_ct_OTOOL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_OTOOL="otool" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL +if test -n "$ac_ct_OTOOL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL" >&5 +$as_echo "$ac_ct_OTOOL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_OTOOL" = x; then + OTOOL=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + OTOOL=$ac_ct_OTOOL + fi +else + OTOOL="$ac_cv_prog_OTOOL" +fi + + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args. +set dummy ${ac_tool_prefix}otool64; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_OTOOL64+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$OTOOL64"; then + ac_cv_prog_OTOOL64="$OTOOL64" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +OTOOL64=$ac_cv_prog_OTOOL64 +if test -n "$OTOOL64"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL64" >&5 +$as_echo "$OTOOL64" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_OTOOL64"; then + ac_ct_OTOOL64=$OTOOL64 + # Extract the first word of "otool64", so it can be a program name with args. +set dummy otool64; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_OTOOL64+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_OTOOL64"; then + ac_cv_prog_ac_ct_OTOOL64="$ac_ct_OTOOL64" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_OTOOL64="otool64" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64 +if test -n "$ac_ct_OTOOL64"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL64" >&5 +$as_echo "$ac_ct_OTOOL64" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_OTOOL64" = x; then + OTOOL64=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + OTOOL64=$ac_ct_OTOOL64 + fi +else + OTOOL64="$ac_cv_prog_OTOOL64" +fi + + + + + + + + + + + + + + + + + + + + + + + + + + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -single_module linker flag" >&5 +$as_echo_n "checking for -single_module linker flag... " >&6; } +if ${lt_cv_apple_cc_single_mod+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_apple_cc_single_mod=no + if test -z "${LT_MULTI_MODULE}"; then + # By default we will add the -single_module flag. You can override + # by either setting the environment variable LT_MULTI_MODULE + # non-empty at configure time, or by adding -multi_module to the + # link flags. + rm -rf libconftest.dylib* + echo "int foo(void){return 1;}" > conftest.c + echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ +-dynamiclib -Wl,-single_module conftest.c" >&5 + $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ + -dynamiclib -Wl,-single_module conftest.c 2>conftest.err + _lt_result=$? + if test -f libconftest.dylib && test ! -s conftest.err && test $_lt_result = 0; then + lt_cv_apple_cc_single_mod=yes + else + cat conftest.err >&5 + fi + rm -rf libconftest.dylib* + rm -f conftest.* + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_apple_cc_single_mod" >&5 +$as_echo "$lt_cv_apple_cc_single_mod" >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -exported_symbols_list linker flag" >&5 +$as_echo_n "checking for -exported_symbols_list linker flag... " >&6; } +if ${lt_cv_ld_exported_symbols_list+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_ld_exported_symbols_list=no + save_LDFLAGS=$LDFLAGS + echo "_main" > conftest.sym + LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + lt_cv_ld_exported_symbols_list=yes +else + lt_cv_ld_exported_symbols_list=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + LDFLAGS="$save_LDFLAGS" + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_exported_symbols_list" >&5 +$as_echo "$lt_cv_ld_exported_symbols_list" >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -force_load linker flag" >&5 +$as_echo_n "checking for -force_load linker flag... " >&6; } +if ${lt_cv_ld_force_load+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_ld_force_load=no + cat > conftest.c << _LT_EOF +int forced_loaded() { return 2;} +_LT_EOF + echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&5 + $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&5 + echo "$AR cru libconftest.a conftest.o" >&5 + $AR cru libconftest.a conftest.o 2>&5 + echo "$RANLIB libconftest.a" >&5 + $RANLIB libconftest.a 2>&5 + cat > conftest.c << _LT_EOF +int main() { return 0;} +_LT_EOF + echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&5 + $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err + _lt_result=$? + if test -f conftest && test ! -s conftest.err && test $_lt_result = 0 && $GREP forced_load conftest 2>&1 >/dev/null; then + lt_cv_ld_force_load=yes + else + cat conftest.err >&5 + fi + rm -f conftest.err libconftest.a conftest conftest.c + rm -rf conftest.dSYM + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_force_load" >&5 +$as_echo "$lt_cv_ld_force_load" >&6; } + case $host_os in + rhapsody* | darwin1.[012]) + _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;; + darwin1.*) + _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; + darwin*) # darwin 5.x on + # if running on 10.5 or later, the deployment target defaults + # to the OS version, if on x86, and 10.4, the deployment + # target defaults to 10.4. Don't you love it? + case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in + 10.0,*86*-darwin8*|10.0,*-darwin[91]*) + _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; + 10.[012]*) + _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; + 10.*) + _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; + esac + ;; + esac + if test "$lt_cv_apple_cc_single_mod" = "yes"; then + _lt_dar_single_mod='$single_module' + fi + if test "$lt_cv_ld_exported_symbols_list" = "yes"; then + _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym' + else + _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}' + fi + if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then + _lt_dsymutil='~$DSYMUTIL $lib || :' + else + _lt_dsymutil= + fi + ;; + esac + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5 +$as_echo_n "checking how to run the C preprocessor... " >&6; } +# On Suns, sometimes $CPP names a directory. +if test -n "$CPP" && test -d "$CPP"; then + CPP= +fi +if test -z "$CPP"; then + if ${ac_cv_prog_CPP+:} false; then : + $as_echo_n "(cached) " >&6 +else + # Double quotes because CPP needs to be expanded + for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" + do + ac_preproc_ok=false +for ac_c_preproc_warn_flag in '' yes +do + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer to if __STDC__ is defined, since + # exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#ifdef __STDC__ +# include +#else +# include +#endif + Syntax error +_ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : + +else + # Broken: fails on valid input. +continue +fi +rm -f conftest.err conftest.i conftest.$ac_ext + + # OK, works on sane cases. Now check whether nonexistent headers + # can be detected and how. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +_ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : + # Broken: success on invalid input. +continue +else + # Passes both tests. +ac_preproc_ok=: +break +fi +rm -f conftest.err conftest.i conftest.$ac_ext + +done +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.i conftest.err conftest.$ac_ext +if $ac_preproc_ok; then : + break +fi + + done + ac_cv_prog_CPP=$CPP + +fi + CPP=$ac_cv_prog_CPP +else + ac_cv_prog_CPP=$CPP +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5 +$as_echo "$CPP" >&6; } +ac_preproc_ok=false +for ac_c_preproc_warn_flag in '' yes +do + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer to if __STDC__ is defined, since + # exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#ifdef __STDC__ +# include +#else +# include +#endif + Syntax error +_ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : + +else + # Broken: fails on valid input. +continue +fi +rm -f conftest.err conftest.i conftest.$ac_ext + + # OK, works on sane cases. Now check whether nonexistent headers + # can be detected and how. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +_ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : + # Broken: success on invalid input. +continue +else + # Passes both tests. +ac_preproc_ok=: +break +fi +rm -f conftest.err conftest.i conftest.$ac_ext + +done +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.i conftest.err conftest.$ac_ext +if $ac_preproc_ok; then : + +else + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "C preprocessor \"$CPP\" fails sanity check +See \`config.log' for more details" "$LINENO" 5; } +fi + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5 +$as_echo_n "checking for ANSI C header files... " >&6; } +if ${ac_cv_header_stdc+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include +#include +#include + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_header_stdc=yes +else + ac_cv_header_stdc=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + +if test $ac_cv_header_stdc = yes; then + # SunOS 4.x string.h does not declare mem*, contrary to ANSI. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "memchr" >/dev/null 2>&1; then : + +else + ac_cv_header_stdc=no +fi +rm -f conftest* + +fi + +if test $ac_cv_header_stdc = yes; then + # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "free" >/dev/null 2>&1; then : + +else + ac_cv_header_stdc=no +fi +rm -f conftest* + +fi + +if test $ac_cv_header_stdc = yes; then + # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. + if test "$cross_compiling" = yes; then : + : +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include +#if ((' ' & 0x0FF) == 0x020) +# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') +# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) +#else +# define ISLOWER(c) \ + (('a' <= (c) && (c) <= 'i') \ + || ('j' <= (c) && (c) <= 'r') \ + || ('s' <= (c) && (c) <= 'z')) +# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) +#endif + +#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) +int +main () +{ + int i; + for (i = 0; i < 256; i++) + if (XOR (islower (i), ISLOWER (i)) + || toupper (i) != TOUPPER (i)) + return 2; + return 0; +} +_ACEOF +if ac_fn_c_try_run "$LINENO"; then : + +else + ac_cv_header_stdc=no +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext +fi + +fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5 +$as_echo "$ac_cv_header_stdc" >&6; } +if test $ac_cv_header_stdc = yes; then + +$as_echo "#define STDC_HEADERS 1" >>confdefs.h + +fi + +# On IRIX 5.3, sys/types and inttypes.h are conflicting. +for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ + inttypes.h stdint.h unistd.h +do : + as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` +ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default +" +if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : + cat >>confdefs.h <<_ACEOF +#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF + +fi + +done + + +for ac_header in dlfcn.h +do : + ac_fn_c_check_header_compile "$LINENO" "dlfcn.h" "ac_cv_header_dlfcn_h" "$ac_includes_default +" +if test "x$ac_cv_header_dlfcn_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_DLFCN_H 1 +_ACEOF + +fi + +done + + + +func_stripname_cnf () +{ + case ${2} in + .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;; + *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;; + esac +} # func_stripname_cnf + + + + + +# Set options + + + + enable_dlopen=no + + + enable_win32_dll=no + + + # Check whether --enable-shared was given. +if test "${enable_shared+set}" = set; then : + enableval=$enable_shared; p=${PACKAGE-default} + case $enableval in + yes) enable_shared=yes ;; + no) enable_shared=no ;; + *) + enable_shared=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_shared=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac +else + enable_shared=yes +fi + + + + + + + + + + # Check whether --enable-static was given. +if test "${enable_static+set}" = set; then : + enableval=$enable_static; p=${PACKAGE-default} + case $enableval in + yes) enable_static=yes ;; + no) enable_static=no ;; + *) + enable_static=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_static=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac +else + enable_static=yes +fi + + + + + + + + + + +# Check whether --with-pic was given. +if test "${with_pic+set}" = set; then : + withval=$with_pic; pic_mode="$withval" +else + pic_mode=default +fi + + +test -z "$pic_mode" && pic_mode=default + + + + + + + + # Check whether --enable-fast-install was given. +if test "${enable_fast_install+set}" = set; then : + enableval=$enable_fast_install; p=${PACKAGE-default} + case $enableval in + yes) enable_fast_install=yes ;; + no) enable_fast_install=no ;; + *) + enable_fast_install=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_fast_install=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac +else + enable_fast_install=yes +fi + + + + + + + + + + + +# This can be used to rebuild libtool when needed +LIBTOOL_DEPS="$ltmain" + +# Always use our own libtool. +LIBTOOL='$(SHELL) $(top_builddir)/libtool' + + + + + + + + + + + + + + + + + + + + + + + + + + +test -z "$LN_S" && LN_S="ln -s" + + + + + + + + + + + + + + +if test -n "${ZSH_VERSION+set}" ; then + setopt NO_GLOB_SUBST +fi + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for objdir" >&5 +$as_echo_n "checking for objdir... " >&6; } +if ${lt_cv_objdir+:} false; then : + $as_echo_n "(cached) " >&6 +else + rm -f .libs 2>/dev/null +mkdir .libs 2>/dev/null +if test -d .libs; then + lt_cv_objdir=.libs +else + # MS-DOS does not allow filenames that begin with a dot. + lt_cv_objdir=_libs +fi +rmdir .libs 2>/dev/null +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_objdir" >&5 +$as_echo "$lt_cv_objdir" >&6; } +objdir=$lt_cv_objdir + + + + + +cat >>confdefs.h <<_ACEOF +#define LT_OBJDIR "$lt_cv_objdir/" +_ACEOF + + + + +case $host_os in +aix3*) + # AIX sometimes has problems with the GCC collect2 program. For some + # reason, if we set the COLLECT_NAMES environment variable, the problems + # vanish in a puff of smoke. + if test "X${COLLECT_NAMES+set}" != Xset; then + COLLECT_NAMES= + export COLLECT_NAMES + fi + ;; +esac + +# Global variables: +ofile=libtool +can_build_shared=yes + +# All known linkers require a `.a' archive for static linking (except MSVC, +# which needs '.lib'). +libext=a + +with_gnu_ld="$lt_cv_prog_gnu_ld" + +old_CC="$CC" +old_CFLAGS="$CFLAGS" + +# Set sane defaults for various variables +test -z "$CC" && CC=cc +test -z "$LTCC" && LTCC=$CC +test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS +test -z "$LD" && LD=ld +test -z "$ac_objext" && ac_objext=o + +for cc_temp in $compiler""; do + case $cc_temp in + compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; + distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; + \-*) ;; + *) break;; + esac +done +cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"` + + +# Only perform the check for file, if the check method requires it +test -z "$MAGIC_CMD" && MAGIC_CMD=file +case $deplibs_check_method in +file_magic*) + if test "$file_magic_cmd" = '$MAGIC_CMD'; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ac_tool_prefix}file" >&5 +$as_echo_n "checking for ${ac_tool_prefix}file... " >&6; } +if ${lt_cv_path_MAGIC_CMD+:} false; then : + $as_echo_n "(cached) " >&6 +else + case $MAGIC_CMD in +[\\/*] | ?:[\\/]*) + lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. + ;; +*) + lt_save_MAGIC_CMD="$MAGIC_CMD" + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" + for ac_dir in $ac_dummy; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/${ac_tool_prefix}file; then + lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file" + if test -n "$file_magic_test_file"; then + case $deplibs_check_method in + "file_magic "*) + file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` + MAGIC_CMD="$lt_cv_path_MAGIC_CMD" + if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | + $EGREP "$file_magic_regex" > /dev/null; then + : + else + cat <<_LT_EOF 1>&2 + +*** Warning: the command libtool uses to detect shared libraries, +*** $file_magic_cmd, produces output that libtool cannot recognize. +*** The result is that libtool may fail to recognize shared libraries +*** as such. This will affect the creation of libtool libraries that +*** depend on shared libraries, but programs linked with such libtool +*** libraries will work regardless of this problem. Nevertheless, you +*** may want to report the problem to your system manager and/or to +*** bug-libtool@gnu.org + +_LT_EOF + fi ;; + esac + fi + break + fi + done + IFS="$lt_save_ifs" + MAGIC_CMD="$lt_save_MAGIC_CMD" + ;; +esac +fi + +MAGIC_CMD="$lt_cv_path_MAGIC_CMD" +if test -n "$MAGIC_CMD"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5 +$as_echo "$MAGIC_CMD" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + + + +if test -z "$lt_cv_path_MAGIC_CMD"; then + if test -n "$ac_tool_prefix"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for file" >&5 +$as_echo_n "checking for file... " >&6; } +if ${lt_cv_path_MAGIC_CMD+:} false; then : + $as_echo_n "(cached) " >&6 +else + case $MAGIC_CMD in +[\\/*] | ?:[\\/]*) + lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. + ;; +*) + lt_save_MAGIC_CMD="$MAGIC_CMD" + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" + for ac_dir in $ac_dummy; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/file; then + lt_cv_path_MAGIC_CMD="$ac_dir/file" + if test -n "$file_magic_test_file"; then + case $deplibs_check_method in + "file_magic "*) + file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` + MAGIC_CMD="$lt_cv_path_MAGIC_CMD" + if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | + $EGREP "$file_magic_regex" > /dev/null; then + : + else + cat <<_LT_EOF 1>&2 + +*** Warning: the command libtool uses to detect shared libraries, +*** $file_magic_cmd, produces output that libtool cannot recognize. +*** The result is that libtool may fail to recognize shared libraries +*** as such. This will affect the creation of libtool libraries that +*** depend on shared libraries, but programs linked with such libtool +*** libraries will work regardless of this problem. Nevertheless, you +*** may want to report the problem to your system manager and/or to +*** bug-libtool@gnu.org + +_LT_EOF + fi ;; + esac + fi + break + fi + done + IFS="$lt_save_ifs" + MAGIC_CMD="$lt_save_MAGIC_CMD" + ;; +esac +fi + +MAGIC_CMD="$lt_cv_path_MAGIC_CMD" +if test -n "$MAGIC_CMD"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5 +$as_echo "$MAGIC_CMD" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + else + MAGIC_CMD=: + fi +fi + + fi + ;; +esac + +# Use C for the default configuration in the libtool script + +lt_save_CC="$CC" +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + +# Source file extension for C test sources. +ac_ext=c + +# Object file extension for compiled C test sources. +objext=o +objext=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code="int some_variable = 0;" + +# Code to be used in simple link tests +lt_simple_link_test_code='int main(){return(0);}' + + + + + + + +# If no C compiler was specified, use CC. +LTCC=${LTCC-"$CC"} + +# If no C compiler flags were specified, use CFLAGS. +LTCFLAGS=${LTCFLAGS-"$CFLAGS"} + +# Allow CC to be a program name with arguments. +compiler=$CC + +# Save the default compiler, since it gets overwritten when the other +# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP. +compiler_DEFAULT=$CC + +# save warnings/boilerplate of simple test code +ac_outfile=conftest.$ac_objext +echo "$lt_simple_compile_test_code" >conftest.$ac_ext +eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +_lt_compiler_boilerplate=`cat conftest.err` +$RM conftest* + +ac_outfile=conftest.$ac_objext +echo "$lt_simple_link_test_code" >conftest.$ac_ext +eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +_lt_linker_boilerplate=`cat conftest.err` +$RM -r conftest* + + +if test -n "$compiler"; then + +lt_prog_compiler_no_builtin_flag= + +if test "$GCC" = yes; then + case $cc_basename in + nvcc*) + lt_prog_compiler_no_builtin_flag=' -Xcompiler -fno-builtin' ;; + *) + lt_prog_compiler_no_builtin_flag=' -fno-builtin' ;; + esac + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 +$as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; } +if ${lt_cv_prog_compiler_rtti_exceptions+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_rtti_exceptions=no + ac_outfile=conftest.$ac_objext + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + lt_compiler_flag="-fno-rtti -fno-exceptions" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + # The option is referenced via a variable to avoid confusing sed. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings other than the usual output. + $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then + lt_cv_prog_compiler_rtti_exceptions=yes + fi + fi + $RM conftest* + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 +$as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; } + +if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then + lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions" +else + : +fi + +fi + + + + + + + lt_prog_compiler_wl= +lt_prog_compiler_pic= +lt_prog_compiler_static= + + + if test "$GCC" = yes; then + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_static='-static' + + case $host_os in + aix*) + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + lt_prog_compiler_static='-Bstatic' + fi + ;; + + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + lt_prog_compiler_pic='-fPIC' + ;; + m68k) + # FIXME: we need at least 68020 code to build shared libraries, but + # adding the `-m68020' flag to GCC prevents building anything better, + # like `-m68040'. + lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4' + ;; + esac + ;; + + beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) + # PIC is the default for these OSes. + ;; + + mingw* | cygwin* | pw32* | os2* | cegcc*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + # Although the cygwin gcc ignores -fPIC, still need this for old-style + # (--disable-auto-import) libraries + lt_prog_compiler_pic='-DDLL_EXPORT' + ;; + + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + lt_prog_compiler_pic='-fno-common' + ;; + + haiku*) + # PIC is the default for Haiku. + # The "-static" flag exists, but is broken. + lt_prog_compiler_static= + ;; + + hpux*) + # PIC is the default for 64-bit PA HP-UX, but not for 32-bit + # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag + # sets the default TLS model and affects inlining. + case $host_cpu in + hppa*64*) + # +Z the default + ;; + *) + lt_prog_compiler_pic='-fPIC' + ;; + esac + ;; + + interix[3-9]*) + # Interix 3.x gcc -fpic/-fPIC options generate broken code. + # Instead, we relocate shared libraries at runtime. + ;; + + msdosdjgpp*) + # Just because we use GCC doesn't mean we suddenly get shared libraries + # on systems that don't support them. + lt_prog_compiler_can_build_shared=no + enable_shared=no + ;; + + *nto* | *qnx*) + # QNX uses GNU C++, but need to define -shared option too, otherwise + # it will coredump. + lt_prog_compiler_pic='-fPIC -shared' + ;; + + sysv4*MP*) + if test -d /usr/nec; then + lt_prog_compiler_pic=-Kconform_pic + fi + ;; + + *) + lt_prog_compiler_pic='-fPIC' + ;; + esac + + case $cc_basename in + nvcc*) # Cuda Compiler Driver 2.2 + lt_prog_compiler_wl='-Xlinker ' + lt_prog_compiler_pic='-Xcompiler -fPIC' + ;; + esac + else + # PORTME Check for flag to pass linker flags through the system compiler. + case $host_os in + aix*) + lt_prog_compiler_wl='-Wl,' + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + lt_prog_compiler_static='-Bstatic' + else + lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp' + fi + ;; + + mingw* | cygwin* | pw32* | os2* | cegcc*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + lt_prog_compiler_pic='-DDLL_EXPORT' + ;; + + hpux9* | hpux10* | hpux11*) + lt_prog_compiler_wl='-Wl,' + # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but + # not for PA HP-UX. + case $host_cpu in + hppa*64*|ia64*) + # +Z the default + ;; + *) + lt_prog_compiler_pic='+Z' + ;; + esac + # Is there a better lt_prog_compiler_static that works with the bundled CC? + lt_prog_compiler_static='${wl}-a ${wl}archive' + ;; + + irix5* | irix6* | nonstopux*) + lt_prog_compiler_wl='-Wl,' + # PIC (with -KPIC) is the default. + lt_prog_compiler_static='-non_shared' + ;; + + linux* | k*bsd*-gnu | kopensolaris*-gnu) + case $cc_basename in + # old Intel for x86_64 which still supported -KPIC. + ecc*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-static' + ;; + # icc used to be incompatible with GCC. + # ICC 10 doesn't accept -KPIC any more. + icc* | ifort*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-fPIC' + lt_prog_compiler_static='-static' + ;; + # Lahey Fortran 8.1. + lf95*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='--shared' + lt_prog_compiler_static='--static' + ;; + nagfor*) + # NAG Fortran compiler + lt_prog_compiler_wl='-Wl,-Wl,,' + lt_prog_compiler_pic='-PIC' + lt_prog_compiler_static='-Bstatic' + ;; + pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*) + # Portland Group compilers (*not* the Pentium gcc compiler, + # which looks to be a dead project) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-fpic' + lt_prog_compiler_static='-Bstatic' + ;; + ccc*) + lt_prog_compiler_wl='-Wl,' + # All Alpha code is PIC. + lt_prog_compiler_static='-non_shared' + ;; + xl* | bgxl* | bgf* | mpixl*) + # IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-qpic' + lt_prog_compiler_static='-qstaticlink' + ;; + *) + case `$CC -V 2>&1 | sed 5q` in + *Sun\ F* | *Sun*Fortran*) + # Sun Fortran 8.3 passes all unrecognized flags to the linker + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + lt_prog_compiler_wl='' + ;; + *Sun\ C*) + # Sun C 5.9 + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + lt_prog_compiler_wl='-Wl,' + ;; + esac + ;; + esac + ;; + + newsos6) + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + ;; + + *nto* | *qnx*) + # QNX uses GNU C++, but need to define -shared option too, otherwise + # it will coredump. + lt_prog_compiler_pic='-fPIC -shared' + ;; + + osf3* | osf4* | osf5*) + lt_prog_compiler_wl='-Wl,' + # All OSF/1 code is PIC. + lt_prog_compiler_static='-non_shared' + ;; + + rdos*) + lt_prog_compiler_static='-non_shared' + ;; + + solaris*) + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + case $cc_basename in + f77* | f90* | f95* | sunf77* | sunf90* | sunf95*) + lt_prog_compiler_wl='-Qoption ld ';; + *) + lt_prog_compiler_wl='-Wl,';; + esac + ;; + + sunos4*) + lt_prog_compiler_wl='-Qoption ld ' + lt_prog_compiler_pic='-PIC' + lt_prog_compiler_static='-Bstatic' + ;; + + sysv4 | sysv4.2uw2* | sysv4.3*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + ;; + + sysv4*MP*) + if test -d /usr/nec ;then + lt_prog_compiler_pic='-Kconform_pic' + lt_prog_compiler_static='-Bstatic' + fi + ;; + + sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + ;; + + unicos*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_can_build_shared=no + ;; + + uts4*) + lt_prog_compiler_pic='-pic' + lt_prog_compiler_static='-Bstatic' + ;; + + *) + lt_prog_compiler_can_build_shared=no + ;; + esac + fi + +case $host_os in + # For platforms which do not support PIC, -DPIC is meaningless: + *djgpp*) + lt_prog_compiler_pic= + ;; + *) + lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC" + ;; +esac + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5 +$as_echo_n "checking for $compiler option to produce PIC... " >&6; } +if ${lt_cv_prog_compiler_pic+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_pic=$lt_prog_compiler_pic +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic" >&5 +$as_echo "$lt_cv_prog_compiler_pic" >&6; } +lt_prog_compiler_pic=$lt_cv_prog_compiler_pic + +# +# Check to make sure the PIC flag actually works. +# +if test -n "$lt_prog_compiler_pic"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5 +$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; } +if ${lt_cv_prog_compiler_pic_works+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_pic_works=no + ac_outfile=conftest.$ac_objext + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + lt_compiler_flag="$lt_prog_compiler_pic -DPIC" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + # The option is referenced via a variable to avoid confusing sed. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings other than the usual output. + $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then + lt_cv_prog_compiler_pic_works=yes + fi + fi + $RM conftest* + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works" >&5 +$as_echo "$lt_cv_prog_compiler_pic_works" >&6; } + +if test x"$lt_cv_prog_compiler_pic_works" = xyes; then + case $lt_prog_compiler_pic in + "" | " "*) ;; + *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;; + esac +else + lt_prog_compiler_pic= + lt_prog_compiler_can_build_shared=no +fi + +fi + + + + + + + + + + + +# +# Check to make sure the static flag actually works. +# +wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\" +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5 +$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; } +if ${lt_cv_prog_compiler_static_works+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_static_works=no + save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS $lt_tmp_static_flag" + echo "$lt_simple_link_test_code" > conftest.$ac_ext + if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then + # The linker can only warn and ignore the option if not recognized + # So say no if there are warnings + if test -s conftest.err; then + # Append any errors to the config.log. + cat conftest.err 1>&5 + $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if diff conftest.exp conftest.er2 >/dev/null; then + lt_cv_prog_compiler_static_works=yes + fi + else + lt_cv_prog_compiler_static_works=yes + fi + fi + $RM -r conftest* + LDFLAGS="$save_LDFLAGS" + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works" >&5 +$as_echo "$lt_cv_prog_compiler_static_works" >&6; } + +if test x"$lt_cv_prog_compiler_static_works" = xyes; then + : +else + lt_prog_compiler_static= +fi + + + + + + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 +$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } +if ${lt_cv_prog_compiler_c_o+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_c_o=no + $RM -r conftest 2>/dev/null + mkdir conftest + cd conftest + mkdir out + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + + lt_compiler_flag="-o out/conftest2.$ac_objext" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) + (eval "$lt_compile" 2>out/conftest.err) + ac_status=$? + cat out/conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s out/conftest2.$ac_objext + then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp + $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 + if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then + lt_cv_prog_compiler_c_o=yes + fi + fi + chmod u+w . 2>&5 + $RM conftest* + # SGI C++ compiler will create directory out/ii_files/ for + # template instantiation + test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files + $RM out/* && rmdir out + cd .. + $RM -r conftest + $RM conftest* + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5 +$as_echo "$lt_cv_prog_compiler_c_o" >&6; } + + + + + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 +$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } +if ${lt_cv_prog_compiler_c_o+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_c_o=no + $RM -r conftest 2>/dev/null + mkdir conftest + cd conftest + mkdir out + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + + lt_compiler_flag="-o out/conftest2.$ac_objext" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) + (eval "$lt_compile" 2>out/conftest.err) + ac_status=$? + cat out/conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s out/conftest2.$ac_objext + then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp + $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 + if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then + lt_cv_prog_compiler_c_o=yes + fi + fi + chmod u+w . 2>&5 + $RM conftest* + # SGI C++ compiler will create directory out/ii_files/ for + # template instantiation + test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files + $RM out/* && rmdir out + cd .. + $RM -r conftest + $RM conftest* + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5 +$as_echo "$lt_cv_prog_compiler_c_o" >&6; } + + + + +hard_links="nottested" +if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then + # do not overwrite the value of need_locks provided by the user + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5 +$as_echo_n "checking if we can lock with hard links... " >&6; } + hard_links=yes + $RM conftest* + ln conftest.a conftest.b 2>/dev/null && hard_links=no + touch conftest.a + ln conftest.a conftest.b 2>&5 || hard_links=no + ln conftest.a conftest.b 2>/dev/null && hard_links=no + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5 +$as_echo "$hard_links" >&6; } + if test "$hard_links" = no; then + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 +$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} + need_locks=warn + fi +else + need_locks=no +fi + + + + + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5 +$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } + + runpath_var= + allow_undefined_flag= + always_export_symbols=no + archive_cmds= + archive_expsym_cmds= + compiler_needs_object=no + enable_shared_with_static_runtimes=no + export_dynamic_flag_spec= + export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + hardcode_automatic=no + hardcode_direct=no + hardcode_direct_absolute=no + hardcode_libdir_flag_spec= + hardcode_libdir_flag_spec_ld= + hardcode_libdir_separator= + hardcode_minus_L=no + hardcode_shlibpath_var=unsupported + inherit_rpath=no + link_all_deplibs=unknown + module_cmds= + module_expsym_cmds= + old_archive_from_new_cmds= + old_archive_from_expsyms_cmds= + thread_safe_flag_spec= + whole_archive_flag_spec= + # include_expsyms should be a list of space-separated symbols to be *always* + # included in the symbol list + include_expsyms= + # exclude_expsyms can be an extended regexp of symbols to exclude + # it will be wrapped by ` (' and `)$', so one must not match beginning or + # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', + # as well as any symbol that contains `d'. + exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*' + # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out + # platforms (ab)use it in PIC code, but their linkers get confused if + # the symbol is explicitly referenced. Since portable code cannot + # rely on this symbol name, it's probably fine to never include it in + # preloaded symbol tables. + # Exclude shared library initialization/finalization symbols. + extract_expsyms_cmds= + + case $host_os in + cygwin* | mingw* | pw32* | cegcc*) + # FIXME: the MSVC++ port hasn't been tested in a loooong time + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + if test "$GCC" != yes; then + with_gnu_ld=no + fi + ;; + interix*) + # we just hope/assume this is gcc and not c89 (= MSVC++) + with_gnu_ld=yes + ;; + openbsd*) + with_gnu_ld=no + ;; + linux* | k*bsd*-gnu | gnu*) + link_all_deplibs=no + ;; + esac + + ld_shlibs=yes + + # On some targets, GNU ld is compatible enough with the native linker + # that we're better off using the native interface for both. + lt_use_gnu_ld_interface=no + if test "$with_gnu_ld" = yes; then + case $host_os in + aix*) + # The AIX port of GNU ld has always aspired to compatibility + # with the native linker. However, as the warning in the GNU ld + # block says, versions before 2.19.5* couldn't really create working + # shared libraries, regardless of the interface used. + case `$LD -v 2>&1` in + *\ \(GNU\ Binutils\)\ 2.19.5*) ;; + *\ \(GNU\ Binutils\)\ 2.[2-9]*) ;; + *\ \(GNU\ Binutils\)\ [3-9]*) ;; + *) + lt_use_gnu_ld_interface=yes + ;; + esac + ;; + *) + lt_use_gnu_ld_interface=yes + ;; + esac + fi + + if test "$lt_use_gnu_ld_interface" = yes; then + # If archive_cmds runs LD, not CC, wlarc should be empty + wlarc='${wl}' + + # Set some defaults for GNU ld with shared library support. These + # are reset later if shared libraries are not supported. Putting them + # here allows them to be overridden if necessary. + runpath_var=LD_RUN_PATH + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + export_dynamic_flag_spec='${wl}--export-dynamic' + # ancient GNU ld didn't support --whole-archive et. al. + if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then + whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + else + whole_archive_flag_spec= + fi + supports_anon_versioning=no + case `$LD -v 2>&1` in + *GNU\ gold*) supports_anon_versioning=yes ;; + *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 + *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... + *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... + *\ 2.11.*) ;; # other 2.11 versions + *) supports_anon_versioning=yes ;; + esac + + # See if GNU ld supports shared libraries. + case $host_os in + aix[3-9]*) + # On AIX/PPC, the GNU linker is very broken + if test "$host_cpu" != ia64; then + ld_shlibs=no + cat <<_LT_EOF 1>&2 + +*** Warning: the GNU linker, at least up to release 2.19, is reported +*** to be unable to reliably create shared libraries on AIX. +*** Therefore, libtool is disabling shared libraries support. If you +*** really care for shared libraries, you may want to install binutils +*** 2.20 or above, or modify your PATH so that a non-GNU linker is found. +*** You will then need to restart the configuration process. + +_LT_EOF + fi + ;; + + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='' + ;; + m68k) + archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + ;; + esac + ;; + + beos*) + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + allow_undefined_flag=unsupported + # Joseph Beckenbach says some releases of gcc + # support --undefined. This deserves some investigation. FIXME + archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + else + ld_shlibs=no + fi + ;; + + cygwin* | mingw* | pw32* | cegcc*) + # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless, + # as there is no search path for DLLs. + hardcode_libdir_flag_spec='-L$libdir' + export_dynamic_flag_spec='${wl}--export-all-symbols' + allow_undefined_flag=unsupported + always_export_symbols=no + enable_shared_with_static_runtimes=yes + export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols' + exclude_expsyms='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname' + + if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + # If the export-symbols file already is a .def file (1st line + # is EXPORTS), use it as is; otherwise, prepend... + archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then + cp $export_symbols $output_objdir/$soname.def; + else + echo EXPORTS > $output_objdir/$soname.def; + cat $export_symbols >> $output_objdir/$soname.def; + fi~ + $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + else + ld_shlibs=no + fi + ;; + + haiku*) + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + link_all_deplibs=yes + ;; + + interix[3-9]*) + hardcode_direct=no + hardcode_shlibpath_var=no + hardcode_libdir_flag_spec='${wl}-rpath,$libdir' + export_dynamic_flag_spec='${wl}-E' + # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. + # Instead, shared libraries are loaded at an image base (0x10000000 by + # default) and relocated if they conflict, which is a slow very memory + # consuming and fragmenting process. To avoid this, we pick a random, + # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link + # time. Moving up from 0x10000000 also allows more sbrk(2) space. + archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + ;; + + gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu) + tmp_diet=no + if test "$host_os" = linux-dietlibc; then + case $cc_basename in + diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn) + esac + fi + if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \ + && test "$tmp_diet" = no + then + tmp_addflag=' $pic_flag' + tmp_sharedflag='-shared' + case $cc_basename,$host_cpu in + pgcc*) # Portland Group C compiler + whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + tmp_addflag=' $pic_flag' + ;; + pgf77* | pgf90* | pgf95* | pgfortran*) + # Portland Group f77 and f90 compilers + whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + tmp_addflag=' $pic_flag -Mnomain' ;; + ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 + tmp_addflag=' -i_dynamic' ;; + efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 + tmp_addflag=' -i_dynamic -nofor_main' ;; + ifc* | ifort*) # Intel Fortran compiler + tmp_addflag=' -nofor_main' ;; + lf95*) # Lahey Fortran 8.1 + whole_archive_flag_spec= + tmp_sharedflag='--shared' ;; + xl[cC]* | bgxl[cC]* | mpixl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below) + tmp_sharedflag='-qmkshrobj' + tmp_addflag= ;; + nvcc*) # Cuda Compiler Driver 2.2 + whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + compiler_needs_object=yes + ;; + esac + case `$CC -V 2>&1 | sed 5q` in + *Sun\ C*) # Sun C 5.9 + whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + compiler_needs_object=yes + tmp_sharedflag='-G' ;; + *Sun\ F*) # Sun Fortran 8.3 + tmp_sharedflag='-G' ;; + esac + archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + + if test "x$supports_anon_versioning" = xyes; then + archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ + $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' + fi + + case $cc_basename in + xlf* | bgf* | bgxlf* | mpixlf*) + # IBM XL Fortran 10.1 on PPC cannot create shared libs itself + whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive' + hardcode_libdir_flag_spec= + hardcode_libdir_flag_spec_ld='-rpath $libdir' + archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib' + if test "x$supports_anon_versioning" = xyes; then + archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ + $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' + fi + ;; + esac + else + ld_shlibs=no + fi + ;; + + netbsd* | netbsdelf*-gnu) + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' + wlarc= + else + archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + fi + ;; + + solaris*) + if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then + ld_shlibs=no + cat <<_LT_EOF 1>&2 + +*** Warning: The releases 2.8.* of the GNU linker cannot reliably +*** create shared libraries on Solaris systems. Therefore, libtool +*** is disabling shared libraries support. We urge you to upgrade GNU +*** binutils to release 2.9.1 or newer. Another option is to modify +*** your PATH or compiler configuration so that the native linker is +*** used, and then restart. + +_LT_EOF + elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs=no + fi + ;; + + sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) + case `$LD -v 2>&1` in + *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*) + ld_shlibs=no + cat <<_LT_EOF 1>&2 + +*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not +*** reliably create shared libraries on SCO systems. Therefore, libtool +*** is disabling shared libraries support. We urge you to upgrade GNU +*** binutils to release 2.16.91.0.3 or newer. Another option is to modify +*** your PATH or compiler configuration so that the native linker is +*** used, and then restart. + +_LT_EOF + ;; + *) + # For security reasons, it is highly recommended that you always + # use absolute paths for naming shared libraries, and exclude the + # DT_RUNPATH tag from executables and libraries. But doing so + # requires that you compile everything twice, which is a pain. + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs=no + fi + ;; + esac + ;; + + sunos4*) + archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' + wlarc= + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + *) + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs=no + fi + ;; + esac + + if test "$ld_shlibs" = no; then + runpath_var= + hardcode_libdir_flag_spec= + export_dynamic_flag_spec= + whole_archive_flag_spec= + fi + else + # PORTME fill in a description of your system's linker (not GNU ld) + case $host_os in + aix3*) + allow_undefined_flag=unsupported + always_export_symbols=yes + archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' + # Note: this linker hardcodes the directories in LIBPATH if there + # are no directories specified by -L. + hardcode_minus_L=yes + if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then + # Neither direct hardcoding nor static linking is supported with a + # broken collect2. + hardcode_direct=unsupported + fi + ;; + + aix[4-9]*) + if test "$host_cpu" = ia64; then + # On IA64, the linker does run time linking by default, so we don't + # have to do anything special. + aix_use_runtimelinking=no + exp_sym_flag='-Bexport' + no_entry_flag="" + else + # If we're using GNU nm, then we don't want the "-C" option. + # -C means demangle to AIX nm, but means don't demangle with GNU nm + # Also, AIX nm treats weak defined symbols like other global + # defined symbols, whereas GNU nm marks them as "W". + if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then + export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' + else + export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' + fi + aix_use_runtimelinking=no + + # Test if we are trying to use run time linking or normal + # AIX style linking. If -brtl is somewhere in LDFLAGS, we + # need to do runtime linking. + case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) + for ld_flag in $LDFLAGS; do + if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then + aix_use_runtimelinking=yes + break + fi + done + ;; + esac + + exp_sym_flag='-bexport' + no_entry_flag='-bnoentry' + fi + + # When large executables or shared objects are built, AIX ld can + # have problems creating the table of contents. If linking a library + # or program results in "error TOC overflow" add -mminimal-toc to + # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not + # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. + + archive_cmds='' + hardcode_direct=yes + hardcode_direct_absolute=yes + hardcode_libdir_separator=':' + link_all_deplibs=yes + file_list_spec='${wl}-f,' + + if test "$GCC" = yes; then + case $host_os in aix4.[012]|aix4.[012].*) + # We only want to do this on AIX 4.2 and lower, the check + # below for broken collect2 doesn't work under 4.3+ + collect2name=`${CC} -print-prog-name=collect2` + if test -f "$collect2name" && + strings "$collect2name" | $GREP resolve_lib_name >/dev/null + then + # We have reworked collect2 + : + else + # We have old collect2 + hardcode_direct=unsupported + # It fails to find uninstalled libraries when the uninstalled + # path is not listed in the libpath. Setting hardcode_minus_L + # to unsupported forces relinking + hardcode_minus_L=yes + hardcode_libdir_flag_spec='-L$libdir' + hardcode_libdir_separator= + fi + ;; + esac + shared_flag='-shared' + if test "$aix_use_runtimelinking" = yes; then + shared_flag="$shared_flag "'${wl}-G' + fi + link_all_deplibs=no + else + # not using gcc + if test "$host_cpu" = ia64; then + # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release + # chokes on -Wl,-G. The following line is correct: + shared_flag='-G' + else + if test "$aix_use_runtimelinking" = yes; then + shared_flag='${wl}-G' + else + shared_flag='${wl}-bM:SRE' + fi + fi + fi + + export_dynamic_flag_spec='${wl}-bexpall' + # It seems that -bexpall does not export symbols beginning with + # underscore (_), so it is better to generate a list of symbols to export. + always_export_symbols=yes + if test "$aix_use_runtimelinking" = yes; then + # Warning - without using the other runtime loading flags (-brtl), + # -berok will link without error, but may produce a broken library. + allow_undefined_flag='-berok' + # Determine the default libpath from the value encoded in an + # empty executable. + if test "${lt_cv_aix_libpath+set}" = set; then + aix_libpath=$lt_cv_aix_libpath +else + if ${lt_cv_aix_libpath_+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + + lt_aix_libpath_sed=' + /Import File Strings/,/^$/ { + /^0/ { + s/^0 *\([^ ]*\) *$/\1/ + p + } + }' + lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + # Check for a 64-bit object if we didn't find anything. + if test -z "$lt_cv_aix_libpath_"; then + lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + fi +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + if test -z "$lt_cv_aix_libpath_"; then + lt_cv_aix_libpath_="/usr/lib:/lib" + fi + +fi + + aix_libpath=$lt_cv_aix_libpath_ +fi + + hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" + archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" + else + if test "$host_cpu" = ia64; then + hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' + allow_undefined_flag="-z nodefs" + archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" + else + # Determine the default libpath from the value encoded in an + # empty executable. + if test "${lt_cv_aix_libpath+set}" = set; then + aix_libpath=$lt_cv_aix_libpath +else + if ${lt_cv_aix_libpath_+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + + lt_aix_libpath_sed=' + /Import File Strings/,/^$/ { + /^0/ { + s/^0 *\([^ ]*\) *$/\1/ + p + } + }' + lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + # Check for a 64-bit object if we didn't find anything. + if test -z "$lt_cv_aix_libpath_"; then + lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + fi +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + if test -z "$lt_cv_aix_libpath_"; then + lt_cv_aix_libpath_="/usr/lib:/lib" + fi + +fi + + aix_libpath=$lt_cv_aix_libpath_ +fi + + hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" + # Warning - without using the other run time loading flags, + # -berok will link without error, but may produce a broken library. + no_undefined_flag=' ${wl}-bernotok' + allow_undefined_flag=' ${wl}-berok' + if test "$with_gnu_ld" = yes; then + # We only use this code for GNU lds that support --whole-archive. + whole_archive_flag_spec='${wl}--whole-archive$convenience ${wl}--no-whole-archive' + else + # Exported symbols can be pulled into shared objects from archives + whole_archive_flag_spec='$convenience' + fi + archive_cmds_need_lc=yes + # This is similar to how AIX traditionally builds its shared libraries. + archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + fi + fi + ;; + + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='' + ;; + m68k) + archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + ;; + esac + ;; + + bsdi[45]*) + export_dynamic_flag_spec=-rdynamic + ;; + + cygwin* | mingw* | pw32* | cegcc*) + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. + case $cc_basename in + cl*) + # Native MSVC + hardcode_libdir_flag_spec=' ' + allow_undefined_flag=unsupported + always_export_symbols=yes + file_list_spec='@' + # Tell ltmain to make .lib files, not .a files. + libext=lib + # Tell ltmain to make .dll files, not .so files. + shrext_cmds=".dll" + # FIXME: Setting linknames here is a bad hack. + archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames=' + archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then + sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp; + else + sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp; + fi~ + $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ + linknames=' + # The linker will not automatically build a static lib if we build a DLL. + # _LT_TAGVAR(old_archive_from_new_cmds, )='true' + enable_shared_with_static_runtimes=yes + export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1,DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols' + # Don't use ranlib + old_postinstall_cmds='chmod 644 $oldlib' + postlink_cmds='lt_outputfile="@OUTPUT@"~ + lt_tool_outputfile="@TOOL_OUTPUT@"~ + case $lt_outputfile in + *.exe|*.EXE) ;; + *) + lt_outputfile="$lt_outputfile.exe" + lt_tool_outputfile="$lt_tool_outputfile.exe" + ;; + esac~ + if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then + $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; + $RM "$lt_outputfile.manifest"; + fi' + ;; + *) + # Assume MSVC wrapper + hardcode_libdir_flag_spec=' ' + allow_undefined_flag=unsupported + # Tell ltmain to make .lib files, not .a files. + libext=lib + # Tell ltmain to make .dll files, not .so files. + shrext_cmds=".dll" + # FIXME: Setting linknames here is a bad hack. + archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames=' + # The linker will automatically build a .lib file if we build a DLL. + old_archive_from_new_cmds='true' + # FIXME: Should let the user specify the lib program. + old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs' + enable_shared_with_static_runtimes=yes + ;; + esac + ;; + + darwin* | rhapsody*) + + + archive_cmds_need_lc=no + hardcode_direct=no + hardcode_automatic=yes + hardcode_shlibpath_var=unsupported + if test "$lt_cv_ld_force_load" = "yes"; then + whole_archive_flag_spec='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`' + else + whole_archive_flag_spec='' + fi + link_all_deplibs=yes + allow_undefined_flag="$_lt_dar_allow_undefined" + case $cc_basename in + ifort*) _lt_dar_can_shared=yes ;; + *) _lt_dar_can_shared=$GCC ;; + esac + if test "$_lt_dar_can_shared" = "yes"; then + output_verbose_link_cmd=func_echo_all + archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" + module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" + archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" + module_expsym_cmds="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" + + else + ld_shlibs=no + fi + + ;; + + dgux*) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_shlibpath_var=no + ;; + + freebsd1*) + ld_shlibs=no + ;; + + # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor + # support. Future versions do this automatically, but an explicit c++rt0.o + # does not break anything, and helps significantly (at the cost of a little + # extra space). + freebsd2.2*) + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + # Unfortunately, older versions of FreeBSD 2 do not have this feature. + freebsd2*) + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=yes + hardcode_minus_L=yes + hardcode_shlibpath_var=no + ;; + + # FreeBSD 3 and greater uses gcc -shared to do shared libraries. + freebsd* | dragonfly*) + archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + hpux9*) + if test "$GCC" = yes; then + archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + else + archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + fi + hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' + hardcode_libdir_separator=: + hardcode_direct=yes + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L=yes + export_dynamic_flag_spec='${wl}-E' + ;; + + hpux10*) + if test "$GCC" = yes && test "$with_gnu_ld" = no; then + archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' + fi + if test "$with_gnu_ld" = no; then + hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' + hardcode_libdir_flag_spec_ld='+b $libdir' + hardcode_libdir_separator=: + hardcode_direct=yes + hardcode_direct_absolute=yes + export_dynamic_flag_spec='${wl}-E' + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L=yes + fi + ;; + + hpux11*) + if test "$GCC" = yes && test "$with_gnu_ld" = no; then + case $host_cpu in + hppa*64*) + archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + ia64*) + archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + else + case $host_cpu in + hppa*64*) + archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + ia64*) + archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + + # Older versions of the 11.00 compiler do not understand -b yet + # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does) + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC understands -b" >&5 +$as_echo_n "checking if $CC understands -b... " >&6; } +if ${lt_cv_prog_compiler__b+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler__b=no + save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS -b" + echo "$lt_simple_link_test_code" > conftest.$ac_ext + if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then + # The linker can only warn and ignore the option if not recognized + # So say no if there are warnings + if test -s conftest.err; then + # Append any errors to the config.log. + cat conftest.err 1>&5 + $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if diff conftest.exp conftest.er2 >/dev/null; then + lt_cv_prog_compiler__b=yes + fi + else + lt_cv_prog_compiler__b=yes + fi + fi + $RM -r conftest* + LDFLAGS="$save_LDFLAGS" + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler__b" >&5 +$as_echo "$lt_cv_prog_compiler__b" >&6; } + +if test x"$lt_cv_prog_compiler__b" = xyes; then + archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' +else + archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' +fi + + ;; + esac + fi + if test "$with_gnu_ld" = no; then + hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' + hardcode_libdir_separator=: + + case $host_cpu in + hppa*64*|ia64*) + hardcode_direct=no + hardcode_shlibpath_var=no + ;; + *) + hardcode_direct=yes + hardcode_direct_absolute=yes + export_dynamic_flag_spec='${wl}-E' + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L=yes + ;; + esac + fi + ;; + + irix5* | irix6* | nonstopux*) + if test "$GCC" = yes; then + archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + # Try to use the -exported_symbol ld option, if it does not + # work, assume that -exports_file does not work either and + # implicitly export all symbols. + # This should be the same for all languages, so no per-tag cache variable. + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $host_os linker accepts -exported_symbol" >&5 +$as_echo_n "checking whether the $host_os linker accepts -exported_symbol... " >&6; } +if ${lt_cv_irix_exported_symbol+:} false; then : + $as_echo_n "(cached) " >&6 +else + save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +int foo (void) { return 0; } +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + lt_cv_irix_exported_symbol=yes +else + lt_cv_irix_exported_symbol=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + LDFLAGS="$save_LDFLAGS" +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_irix_exported_symbol" >&5 +$as_echo "$lt_cv_irix_exported_symbol" >&6; } + if test "$lt_cv_irix_exported_symbol" = yes; then + archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' + fi + else + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib' + fi + archive_cmds_need_lc='no' + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator=: + inherit_rpath=yes + link_all_deplibs=yes + ;; + + netbsd* | netbsdelf*-gnu) + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out + else + archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF + fi + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + newsos6) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=yes + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator=: + hardcode_shlibpath_var=no + ;; + + *nto* | *qnx*) + ;; + + openbsd*) + if test -f /usr/libexec/ld.so; then + hardcode_direct=yes + hardcode_shlibpath_var=no + hardcode_direct_absolute=yes + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' + hardcode_libdir_flag_spec='${wl}-rpath,$libdir' + export_dynamic_flag_spec='${wl}-E' + else + case $host_os in + openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec='-R$libdir' + ;; + *) + archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + hardcode_libdir_flag_spec='${wl}-rpath,$libdir' + ;; + esac + fi + else + ld_shlibs=no + fi + ;; + + os2*) + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + allow_undefined_flag=unsupported + archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' + old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' + ;; + + osf3*) + if test "$GCC" = yes; then + allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' + archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + else + allow_undefined_flag=' -expect_unresolved \*' + archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + fi + archive_cmds_need_lc='no' + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator=: + ;; + + osf4* | osf5*) # as osf3* with the addition of -msym flag + if test "$GCC" = yes; then + allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' + archive_cmds='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + else + allow_undefined_flag=' -expect_unresolved \*' + archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~ + $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp' + + # Both c and cxx compiler support -rpath directly + hardcode_libdir_flag_spec='-rpath $libdir' + fi + archive_cmds_need_lc='no' + hardcode_libdir_separator=: + ;; + + solaris*) + no_undefined_flag=' -z defs' + if test "$GCC" = yes; then + wlarc='${wl}' + archive_cmds='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' + else + case `$CC -V 2>&1` in + *"Compilers 5.0"*) + wlarc='' + archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' + archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp' + ;; + *) + wlarc='${wl}' + archive_cmds='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' + ;; + esac + fi + hardcode_libdir_flag_spec='-R$libdir' + hardcode_shlibpath_var=no + case $host_os in + solaris2.[0-5] | solaris2.[0-5].*) ;; + *) + # The compiler driver will combine and reorder linker options, + # but understands `-z linker_flag'. GCC discards it without `$wl', + # but is careful enough not to reorder. + # Supported since Solaris 2.6 (maybe 2.5.1?) + if test "$GCC" = yes; then + whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' + else + whole_archive_flag_spec='-z allextract$convenience -z defaultextract' + fi + ;; + esac + link_all_deplibs=yes + ;; + + sunos4*) + if test "x$host_vendor" = xsequent; then + # Use $CC to link under sequent, because it throws in some extra .o + # files that make .init and .fini sections work. + archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' + fi + hardcode_libdir_flag_spec='-L$libdir' + hardcode_direct=yes + hardcode_minus_L=yes + hardcode_shlibpath_var=no + ;; + + sysv4) + case $host_vendor in + sni) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=yes # is this really true??? + ;; + siemens) + ## LD is ld it makes a PLAMLIB + ## CC just makes a GrossModule. + archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags' + reload_cmds='$CC -r -o $output$reload_objs' + hardcode_direct=no + ;; + motorola) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=no #Motorola manual says yes, but my tests say they lie + ;; + esac + runpath_var='LD_RUN_PATH' + hardcode_shlibpath_var=no + ;; + + sysv4.3*) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_shlibpath_var=no + export_dynamic_flag_spec='-Bexport' + ;; + + sysv4*MP*) + if test -d /usr/nec; then + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_shlibpath_var=no + runpath_var=LD_RUN_PATH + hardcode_runpath_var=yes + ld_shlibs=yes + fi + ;; + + sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) + no_undefined_flag='${wl}-z,text' + archive_cmds_need_lc=no + hardcode_shlibpath_var=no + runpath_var='LD_RUN_PATH' + + if test "$GCC" = yes; then + archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + fi + ;; + + sysv5* | sco3.2v5* | sco5v6*) + # Note: We can NOT use -z defs as we might desire, because we do not + # link with -lc, and that would cause any symbols used from libc to + # always be unresolved, which means just about no library would + # ever link correctly. If we're not using GNU ld we use -z text + # though, which does catch some bad symbols but isn't as heavy-handed + # as -z defs. + no_undefined_flag='${wl}-z,text' + allow_undefined_flag='${wl}-z,nodefs' + archive_cmds_need_lc=no + hardcode_shlibpath_var=no + hardcode_libdir_flag_spec='${wl}-R,$libdir' + hardcode_libdir_separator=':' + link_all_deplibs=yes + export_dynamic_flag_spec='${wl}-Bexport' + runpath_var='LD_RUN_PATH' + + if test "$GCC" = yes; then + archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + fi + ;; + + uts4*) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_shlibpath_var=no + ;; + + *) + ld_shlibs=no + ;; + esac + + if test x$host_vendor = xsni; then + case $host in + sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) + export_dynamic_flag_spec='${wl}-Blargedynsym' + ;; + esac + fi + fi + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs" >&5 +$as_echo "$ld_shlibs" >&6; } +test "$ld_shlibs" = no && can_build_shared=no + +with_gnu_ld=$with_gnu_ld + + + + + + + + + + + + + + + +# +# Do we need to explicitly link libc? +# +case "x$archive_cmds_need_lc" in +x|xyes) + # Assume -lc should be added + archive_cmds_need_lc=yes + + if test "$enable_shared" = yes && test "$GCC" = yes; then + case $archive_cmds in + *'~'*) + # FIXME: we may have to deal with multi-command sequences. + ;; + '$CC '*) + # Test whether the compiler implicitly links with -lc since on some + # systems, -lgcc has to come before -lc. If gcc already passes -lc + # to ld, don't add -lc before -lgcc. + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5 +$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; } +if ${lt_cv_archive_cmds_need_lc+:} false; then : + $as_echo_n "(cached) " >&6 +else + $RM conftest* + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } 2>conftest.err; then + soname=conftest + lib=conftest + libobjs=conftest.$ac_objext + deplibs= + wl=$lt_prog_compiler_wl + pic_flag=$lt_prog_compiler_pic + compiler_flags=-v + linker_flags=-v + verstring= + output_objdir=. + libname=conftest + lt_save_allow_undefined_flag=$allow_undefined_flag + allow_undefined_flag= + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5 + (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + then + lt_cv_archive_cmds_need_lc=no + else + lt_cv_archive_cmds_need_lc=yes + fi + allow_undefined_flag=$lt_save_allow_undefined_flag + else + cat conftest.err 1>&5 + fi + $RM conftest* + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_archive_cmds_need_lc" >&5 +$as_echo "$lt_cv_archive_cmds_need_lc" >&6; } + archive_cmds_need_lc=$lt_cv_archive_cmds_need_lc + ;; + esac + fi + ;; +esac + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5 +$as_echo_n "checking dynamic linker characteristics... " >&6; } + +if test "$GCC" = yes; then + case $host_os in + darwin*) lt_awk_arg="/^libraries:/,/LR/" ;; + *) lt_awk_arg="/^libraries:/" ;; + esac + case $host_os in + mingw* | cegcc*) lt_sed_strip_eq="s,=\([A-Za-z]:\),\1,g" ;; + *) lt_sed_strip_eq="s,=/,/,g" ;; + esac + lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq` + case $lt_search_path_spec in + *\;*) + # if the path contains ";" then we assume it to be the separator + # otherwise default to the standard path separator (i.e. ":") - it is + # assumed that no part of a normal pathname contains ";" but that should + # okay in the real world where ";" in dirpaths is itself problematic. + lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'` + ;; + *) + lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"` + ;; + esac + # Ok, now we have the path, separated by spaces, we can step through it + # and add multilib dir if necessary. + lt_tmp_lt_search_path_spec= + lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` + for lt_sys_path in $lt_search_path_spec; do + if test -d "$lt_sys_path/$lt_multi_os_dir"; then + lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir" + else + test -d "$lt_sys_path" && \ + lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" + fi + done + lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk ' +BEGIN {RS=" "; FS="/|\n";} { + lt_foo=""; + lt_count=0; + for (lt_i = NF; lt_i > 0; lt_i--) { + if ($lt_i != "" && $lt_i != ".") { + if ($lt_i == "..") { + lt_count++; + } else { + if (lt_count == 0) { + lt_foo="/" $lt_i lt_foo; + } else { + lt_count--; + } + } + } + } + if (lt_foo != "") { lt_freq[lt_foo]++; } + if (lt_freq[lt_foo] == 1) { print lt_foo; } +}'` + # AWK program above erroneously prepends '/' to C:/dos/paths + # for these hosts. + case $host_os in + mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\ + $SED 's,/\([A-Za-z]:\),\1,g'` ;; + esac + sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP` +else + sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" +fi +library_names_spec= +libname_spec='lib$name' +soname_spec= +shrext_cmds=".so" +postinstall_cmds= +postuninstall_cmds= +finish_cmds= +finish_eval= +shlibpath_var= +shlibpath_overrides_runpath=unknown +version_type=none +dynamic_linker="$host_os ld.so" +sys_lib_dlsearch_path_spec="/lib /usr/lib" +need_lib_prefix=unknown +hardcode_into_libs=no + +# when you set need_version to no, make sure it does not cause -set_version +# flags to be left without arguments +need_version=unknown + +case $host_os in +aix3*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' + shlibpath_var=LIBPATH + + # AIX 3 has no versioning support, so we append a major version to the name. + soname_spec='${libname}${release}${shared_ext}$major' + ;; + +aix[4-9]*) + version_type=linux + need_lib_prefix=no + need_version=no + hardcode_into_libs=yes + if test "$host_cpu" = ia64; then + # AIX 5 supports IA64 + library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + else + # With GCC up to 2.95.x, collect2 would create an import file + # for dependence libraries. The import file would start with + # the line `#! .'. This would cause the generated library to + # depend on `.', always an invalid library. This was fixed in + # development snapshots of GCC prior to 3.0. + case $host_os in + aix4 | aix4.[01] | aix4.[01].*) + if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' + echo ' yes ' + echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then + : + else + can_build_shared=no + fi + ;; + esac + # AIX (on Power*) has no versioning support, so currently we can not hardcode correct + # soname into executable. Probably we can add versioning support to + # collect2, so additional links can be useful in future. + if test "$aix_use_runtimelinking" = yes; then + # If using run time linking (on AIX 4.2 or later) use lib.so + # instead of lib.a to let people know that these are not + # typical AIX shared libraries. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + else + # We preserve .a as extension for shared libraries through AIX4.2 + # and later when we are not doing run time linking. + library_names_spec='${libname}${release}.a $libname.a' + soname_spec='${libname}${release}${shared_ext}$major' + fi + shlibpath_var=LIBPATH + fi + ;; + +amigaos*) + case $host_cpu in + powerpc) + # Since July 2007 AmigaOS4 officially supports .so libraries. + # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + ;; + m68k) + library_names_spec='$libname.ixlibrary $libname.a' + # Create ${libname}_ixlibrary.a entries in /sys/libs. + finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' + ;; + esac + ;; + +beos*) + library_names_spec='${libname}${shared_ext}' + dynamic_linker="$host_os ld.so" + shlibpath_var=LIBRARY_PATH + ;; + +bsdi[45]*) + version_type=linux + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" + sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" + # the default ld.so.conf also contains /usr/contrib/lib and + # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow + # libtool to hard-code these into programs + ;; + +cygwin* | mingw* | pw32* | cegcc*) + version_type=windows + shrext_cmds=".dll" + need_version=no + need_lib_prefix=no + + case $GCC,$cc_basename in + yes,*) + # gcc + library_names_spec='$libname.dll.a' + # DLL is installed to $(libdir)/../bin by postinstall_cmds + postinstall_cmds='base_file=`basename \${file}`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog $dir/$dlname \$dldir/$dlname~ + chmod a+x \$dldir/$dlname~ + if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then + eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; + fi' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $RM \$dlpath' + shlibpath_overrides_runpath=yes + + case $host_os in + cygwin*) + # Cygwin DLLs use 'cyg' prefix rather than 'lib' + soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + + sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api" + ;; + mingw* | cegcc*) + # MinGW DLLs use traditional 'lib' prefix + soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + ;; + pw32*) + # pw32 DLLs use 'pw' prefix rather than 'lib' + library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + ;; + esac + dynamic_linker='Win32 ld.exe' + ;; + + *,cl*) + # Native MSVC + libname_spec='$name' + soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + library_names_spec='${libname}.dll.lib' + + case $build_os in + mingw*) + sys_lib_search_path_spec= + lt_save_ifs=$IFS + IFS=';' + for lt_path in $LIB + do + IFS=$lt_save_ifs + # Let DOS variable expansion print the short 8.3 style file name. + lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"` + sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path" + done + IFS=$lt_save_ifs + # Convert to MSYS style. + sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'` + ;; + cygwin*) + # Convert to unix form, then to dos form, then back to unix form + # but this time dos style (no spaces!) so that the unix form looks + # like /cygdrive/c/PROGRA~1:/cygdr... + sys_lib_search_path_spec=`cygpath --path --unix "$LIB"` + sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null` + sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + ;; + *) + sys_lib_search_path_spec="$LIB" + if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then + # It is most probably a Windows format PATH. + sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` + else + sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + fi + # FIXME: find the short name or the path components, as spaces are + # common. (e.g. "Program Files" -> "PROGRA~1") + ;; + esac + + # DLL is installed to $(libdir)/../bin by postinstall_cmds + postinstall_cmds='base_file=`basename \${file}`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog $dir/$dlname \$dldir/$dlname' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $RM \$dlpath' + shlibpath_overrides_runpath=yes + dynamic_linker='Win32 link.exe' + ;; + + *) + # Assume MSVC wrapper + library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' + dynamic_linker='Win32 ld.exe' + ;; + esac + # FIXME: first we should search . and the directory the executable is in + shlibpath_var=PATH + ;; + +darwin* | rhapsody*) + dynamic_linker="$host_os dyld" + version_type=darwin + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext' + soname_spec='${libname}${release}${major}$shared_ext' + shlibpath_overrides_runpath=yes + shlibpath_var=DYLD_LIBRARY_PATH + shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' + + sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib" + sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' + ;; + +dgux*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +freebsd1*) + dynamic_linker=no + ;; + +freebsd* | dragonfly*) + # DragonFly does not have aout. When/if they implement a new + # versioning mechanism, adjust this. + if test -x /usr/bin/objformat; then + objformat=`/usr/bin/objformat` + else + case $host_os in + freebsd[123]*) objformat=aout ;; + *) objformat=elf ;; + esac + fi + version_type=freebsd-$objformat + case $version_type in + freebsd-elf*) + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' + need_version=no + need_lib_prefix=no + ;; + freebsd-*) + library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' + need_version=yes + ;; + esac + shlibpath_var=LD_LIBRARY_PATH + case $host_os in + freebsd2*) + shlibpath_overrides_runpath=yes + ;; + freebsd3.[01]* | freebsdelf3.[01]*) + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + freebsd3.[2-9]* | freebsdelf3.[2-9]* | \ + freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1) + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + *) # from 4.6 on, and DragonFly + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + esac + ;; + +gnu*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + +haiku*) + version_type=linux + need_lib_prefix=no + need_version=no + dynamic_linker="$host_os runtime_loader" + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LIBRARY_PATH + shlibpath_overrides_runpath=yes + sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib' + hardcode_into_libs=yes + ;; + +hpux9* | hpux10* | hpux11*) + # Give a soname corresponding to the major version so that dld.sl refuses to + # link against other versions. + version_type=sunos + need_lib_prefix=no + need_version=no + case $host_cpu in + ia64*) + shrext_cmds='.so' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.so" + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + if test "X$HPUX_IA64_MODE" = X32; then + sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" + else + sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" + fi + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + hppa*64*) + shrext_cmds='.sl' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.sl" + shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + *) + shrext_cmds='.sl' + dynamic_linker="$host_os dld.sl" + shlibpath_var=SHLIB_PATH + shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + ;; + esac + # HP-UX runs *really* slowly unless shared libraries are mode 555, ... + postinstall_cmds='chmod 555 $lib' + # or fails outright, so override atomically: + install_override_mode=555 + ;; + +interix[3-9]*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + +irix5* | irix6* | nonstopux*) + case $host_os in + nonstopux*) version_type=nonstopux ;; + *) + if test "$lt_cv_prog_gnu_ld" = yes; then + version_type=linux + else + version_type=irix + fi ;; + esac + need_lib_prefix=no + need_version=no + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' + case $host_os in + irix5* | nonstopux*) + libsuff= shlibsuff= + ;; + *) + case $LD in # libtool.m4 will add one of these switches to LD + *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") + libsuff= shlibsuff= libmagic=32-bit;; + *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") + libsuff=32 shlibsuff=N32 libmagic=N32;; + *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") + libsuff=64 shlibsuff=64 libmagic=64-bit;; + *) libsuff= shlibsuff= libmagic=never-match;; + esac + ;; + esac + shlibpath_var=LD_LIBRARY${shlibsuff}_PATH + shlibpath_overrides_runpath=no + sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" + sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" + hardcode_into_libs=yes + ;; + +# No shared lib support for Linux oldld, aout, or coff. +linux*oldld* | linux*aout* | linux*coff*) + dynamic_linker=no + ;; + +# This must be Linux ELF. +linux* | k*bsd*-gnu | kopensolaris*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + + # Some binutils ld are patched to set DT_RUNPATH + if ${lt_cv_shlibpath_overrides_runpath+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_shlibpath_overrides_runpath=no + save_LDFLAGS=$LDFLAGS + save_libdir=$libdir + eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \ + LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\"" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then : + lt_cv_shlibpath_overrides_runpath=yes +fi +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + LDFLAGS=$save_LDFLAGS + libdir=$save_libdir + +fi + + shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath + + # This implies no fast_install, which is unacceptable. + # Some rework will be needed to allow for fast_install + # before this can be enabled. + hardcode_into_libs=yes + + # Append ld.so.conf contents to the search path + if test -f /etc/ld.so.conf; then + lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '` + sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" + fi + + # We used to test for /lib/ld.so.1 and disable shared libraries on + # powerpc, because MkLinux only supported shared libraries with the + # GNU dynamic linker. Since this was broken with cross compilers, + # most powerpc-linux boxes support dynamic linking these days and + # people can always --disable-shared, the test was removed, and we + # assume the GNU/Linux dynamic linker is in use. + dynamic_linker='GNU/Linux ld.so' + ;; + +netbsdelf*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + dynamic_linker='NetBSD ld.elf_so' + ;; + +netbsd*) + version_type=sunos + need_lib_prefix=no + need_version=no + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + dynamic_linker='NetBSD (a.out) ld.so' + else + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + dynamic_linker='NetBSD ld.elf_so' + fi + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + +newsos6) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + ;; + +*nto* | *qnx*) + version_type=qnx + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + dynamic_linker='ldqnx.so' + ;; + +openbsd*) + version_type=sunos + sys_lib_dlsearch_path_spec="/usr/lib" + need_lib_prefix=no + # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. + case $host_os in + openbsd3.3 | openbsd3.3.*) need_version=yes ;; + *) need_version=no ;; + esac + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + shlibpath_var=LD_LIBRARY_PATH + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + case $host_os in + openbsd2.[89] | openbsd2.[89].*) + shlibpath_overrides_runpath=no + ;; + *) + shlibpath_overrides_runpath=yes + ;; + esac + else + shlibpath_overrides_runpath=yes + fi + ;; + +os2*) + libname_spec='$name' + shrext_cmds=".dll" + need_lib_prefix=no + library_names_spec='$libname${shared_ext} $libname.a' + dynamic_linker='OS/2 ld.exe' + shlibpath_var=LIBPATH + ;; + +osf3* | osf4* | osf5*) + version_type=osf + need_lib_prefix=no + need_version=no + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" + sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" + ;; + +rdos*) + dynamic_linker=no + ;; + +solaris*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + # ldd complains unless libraries are executable + postinstall_cmds='chmod +x $lib' + ;; + +sunos4*) + version_type=sunos + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + if test "$with_gnu_ld" = yes; then + need_lib_prefix=no + fi + need_version=yes + ;; + +sysv4 | sysv4.3*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + case $host_vendor in + sni) + shlibpath_overrides_runpath=no + need_lib_prefix=no + runpath_var=LD_RUN_PATH + ;; + siemens) + need_lib_prefix=no + ;; + motorola) + need_lib_prefix=no + need_version=no + shlibpath_overrides_runpath=no + sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' + ;; + esac + ;; + +sysv4*MP*) + if test -d /usr/nec ;then + version_type=linux + library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' + soname_spec='$libname${shared_ext}.$major' + shlibpath_var=LD_LIBRARY_PATH + fi + ;; + +sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) + version_type=freebsd-elf + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + if test "$with_gnu_ld" = yes; then + sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' + else + sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' + case $host_os in + sco3.2v5*) + sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" + ;; + esac + fi + sys_lib_dlsearch_path_spec='/usr/lib' + ;; + +tpf*) + # TPF is a cross-target only. Preferred cross-host = GNU/Linux. + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + +uts4*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +*) + dynamic_linker=no + ;; +esac +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5 +$as_echo "$dynamic_linker" >&6; } +test "$dynamic_linker" = no && can_build_shared=no + +variables_saved_for_relink="PATH $shlibpath_var $runpath_var" +if test "$GCC" = yes; then + variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" +fi + +if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then + sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" +fi +if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then + sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" +fi + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5 +$as_echo_n "checking how to hardcode library paths into programs... " >&6; } +hardcode_action= +if test -n "$hardcode_libdir_flag_spec" || + test -n "$runpath_var" || + test "X$hardcode_automatic" = "Xyes" ; then + + # We can hardcode non-existent directories. + if test "$hardcode_direct" != no && + # If the only mechanism to avoid hardcoding is shlibpath_var, we + # have to relink, otherwise we might link with an installed library + # when we should be linking with a yet-to-be-installed one + ## test "$_LT_TAGVAR(hardcode_shlibpath_var, )" != no && + test "$hardcode_minus_L" != no; then + # Linking always hardcodes the temporary library directory. + hardcode_action=relink + else + # We can link without hardcoding, and we can hardcode nonexisting dirs. + hardcode_action=immediate + fi +else + # We cannot hardcode anything, or else we can only hardcode existing + # directories. + hardcode_action=unsupported +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action" >&5 +$as_echo "$hardcode_action" >&6; } + +if test "$hardcode_action" = relink || + test "$inherit_rpath" = yes; then + # Fast installation is not supported + enable_fast_install=no +elif test "$shlibpath_overrides_runpath" = yes || + test "$enable_shared" = no; then + # Fast installation is not necessary + enable_fast_install=needless +fi + + + + + + + if test "x$enable_dlopen" != xyes; then + enable_dlopen=unknown + enable_dlopen_self=unknown + enable_dlopen_self_static=unknown +else + lt_cv_dlopen=no + lt_cv_dlopen_libs= + + case $host_os in + beos*) + lt_cv_dlopen="load_add_on" + lt_cv_dlopen_libs= + lt_cv_dlopen_self=yes + ;; + + mingw* | pw32* | cegcc*) + lt_cv_dlopen="LoadLibrary" + lt_cv_dlopen_libs= + ;; + + cygwin*) + lt_cv_dlopen="dlopen" + lt_cv_dlopen_libs= + ;; + + darwin*) + # if libdl is installed we need to link against it + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5 +$as_echo_n "checking for dlopen in -ldl... " >&6; } +if ${ac_cv_lib_dl_dlopen+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldl $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char dlopen (); +int +main () +{ +return dlopen (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_dl_dlopen=yes +else + ac_cv_lib_dl_dlopen=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5 +$as_echo "$ac_cv_lib_dl_dlopen" >&6; } +if test "x$ac_cv_lib_dl_dlopen" = xyes; then : + lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" +else + + lt_cv_dlopen="dyld" + lt_cv_dlopen_libs= + lt_cv_dlopen_self=yes + +fi + + ;; + + *) + ac_fn_c_check_func "$LINENO" "shl_load" "ac_cv_func_shl_load" +if test "x$ac_cv_func_shl_load" = xyes; then : + lt_cv_dlopen="shl_load" +else + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5 +$as_echo_n "checking for shl_load in -ldld... " >&6; } +if ${ac_cv_lib_dld_shl_load+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldld $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char shl_load (); +int +main () +{ +return shl_load (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_dld_shl_load=yes +else + ac_cv_lib_dld_shl_load=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5 +$as_echo "$ac_cv_lib_dld_shl_load" >&6; } +if test "x$ac_cv_lib_dld_shl_load" = xyes; then : + lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld" +else + ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen" +if test "x$ac_cv_func_dlopen" = xyes; then : + lt_cv_dlopen="dlopen" +else + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5 +$as_echo_n "checking for dlopen in -ldl... " >&6; } +if ${ac_cv_lib_dl_dlopen+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldl $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char dlopen (); +int +main () +{ +return dlopen (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_dl_dlopen=yes +else + ac_cv_lib_dl_dlopen=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5 +$as_echo "$ac_cv_lib_dl_dlopen" >&6; } +if test "x$ac_cv_lib_dl_dlopen" = xyes; then : + lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" +else + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -lsvld" >&5 +$as_echo_n "checking for dlopen in -lsvld... " >&6; } +if ${ac_cv_lib_svld_dlopen+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lsvld $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char dlopen (); +int +main () +{ +return dlopen (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_svld_dlopen=yes +else + ac_cv_lib_svld_dlopen=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_svld_dlopen" >&5 +$as_echo "$ac_cv_lib_svld_dlopen" >&6; } +if test "x$ac_cv_lib_svld_dlopen" = xyes; then : + lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld" +else + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dld_link in -ldld" >&5 +$as_echo_n "checking for dld_link in -ldld... " >&6; } +if ${ac_cv_lib_dld_dld_link+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldld $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char dld_link (); +int +main () +{ +return dld_link (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_dld_dld_link=yes +else + ac_cv_lib_dld_dld_link=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_dld_link" >&5 +$as_echo "$ac_cv_lib_dld_dld_link" >&6; } +if test "x$ac_cv_lib_dld_dld_link" = xyes; then : + lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld" +fi + + +fi + + +fi + + +fi + + +fi + + +fi + + ;; + esac + + if test "x$lt_cv_dlopen" != xno; then + enable_dlopen=yes + else + enable_dlopen=no + fi + + case $lt_cv_dlopen in + dlopen) + save_CPPFLAGS="$CPPFLAGS" + test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" + + save_LDFLAGS="$LDFLAGS" + wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" + + save_LIBS="$LIBS" + LIBS="$lt_cv_dlopen_libs $LIBS" + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a program can dlopen itself" >&5 +$as_echo_n "checking whether a program can dlopen itself... " >&6; } +if ${lt_cv_dlopen_self+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test "$cross_compiling" = yes; then : + lt_cv_dlopen_self=cross +else + lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 + lt_status=$lt_dlunknown + cat > conftest.$ac_ext <<_LT_EOF +#line $LINENO "configure" +#include "confdefs.h" + +#if HAVE_DLFCN_H +#include +#endif + +#include + +#ifdef RTLD_GLOBAL +# define LT_DLGLOBAL RTLD_GLOBAL +#else +# ifdef DL_GLOBAL +# define LT_DLGLOBAL DL_GLOBAL +# else +# define LT_DLGLOBAL 0 +# endif +#endif + +/* We may have to define LT_DLLAZY_OR_NOW in the command line if we + find out it does not work in some platform. */ +#ifndef LT_DLLAZY_OR_NOW +# ifdef RTLD_LAZY +# define LT_DLLAZY_OR_NOW RTLD_LAZY +# else +# ifdef DL_LAZY +# define LT_DLLAZY_OR_NOW DL_LAZY +# else +# ifdef RTLD_NOW +# define LT_DLLAZY_OR_NOW RTLD_NOW +# else +# ifdef DL_NOW +# define LT_DLLAZY_OR_NOW DL_NOW +# else +# define LT_DLLAZY_OR_NOW 0 +# endif +# endif +# endif +# endif +#endif + +/* When -fvisbility=hidden is used, assume the code has been annotated + correspondingly for the symbols needed. */ +#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) +int fnord () __attribute__((visibility("default"))); +#endif + +int fnord () { return 42; } +int main () +{ + void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); + int status = $lt_dlunknown; + + if (self) + { + if (dlsym (self,"fnord")) status = $lt_dlno_uscore; + else + { + if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; + else puts (dlerror ()); + } + /* dlclose (self); */ + } + else + puts (dlerror ()); + + return status; +} +_LT_EOF + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 + (eval $ac_link) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then + (./conftest; exit; ) >&5 2>/dev/null + lt_status=$? + case x$lt_status in + x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;; + x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;; + x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;; + esac + else : + # compilation failed + lt_cv_dlopen_self=no + fi +fi +rm -fr conftest* + + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self" >&5 +$as_echo "$lt_cv_dlopen_self" >&6; } + + if test "x$lt_cv_dlopen_self" = xyes; then + wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a statically linked program can dlopen itself" >&5 +$as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; } +if ${lt_cv_dlopen_self_static+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test "$cross_compiling" = yes; then : + lt_cv_dlopen_self_static=cross +else + lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 + lt_status=$lt_dlunknown + cat > conftest.$ac_ext <<_LT_EOF +#line $LINENO "configure" +#include "confdefs.h" + +#if HAVE_DLFCN_H +#include +#endif + +#include + +#ifdef RTLD_GLOBAL +# define LT_DLGLOBAL RTLD_GLOBAL +#else +# ifdef DL_GLOBAL +# define LT_DLGLOBAL DL_GLOBAL +# else +# define LT_DLGLOBAL 0 +# endif +#endif + +/* We may have to define LT_DLLAZY_OR_NOW in the command line if we + find out it does not work in some platform. */ +#ifndef LT_DLLAZY_OR_NOW +# ifdef RTLD_LAZY +# define LT_DLLAZY_OR_NOW RTLD_LAZY +# else +# ifdef DL_LAZY +# define LT_DLLAZY_OR_NOW DL_LAZY +# else +# ifdef RTLD_NOW +# define LT_DLLAZY_OR_NOW RTLD_NOW +# else +# ifdef DL_NOW +# define LT_DLLAZY_OR_NOW DL_NOW +# else +# define LT_DLLAZY_OR_NOW 0 +# endif +# endif +# endif +# endif +#endif + +/* When -fvisbility=hidden is used, assume the code has been annotated + correspondingly for the symbols needed. */ +#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) +int fnord () __attribute__((visibility("default"))); +#endif + +int fnord () { return 42; } +int main () +{ + void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); + int status = $lt_dlunknown; + + if (self) + { + if (dlsym (self,"fnord")) status = $lt_dlno_uscore; + else + { + if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; + else puts (dlerror ()); + } + /* dlclose (self); */ + } + else + puts (dlerror ()); + + return status; +} +_LT_EOF + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 + (eval $ac_link) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then + (./conftest; exit; ) >&5 2>/dev/null + lt_status=$? + case x$lt_status in + x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;; + x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;; + x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;; + esac + else : + # compilation failed + lt_cv_dlopen_self_static=no + fi +fi +rm -fr conftest* + + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self_static" >&5 +$as_echo "$lt_cv_dlopen_self_static" >&6; } + fi + + CPPFLAGS="$save_CPPFLAGS" + LDFLAGS="$save_LDFLAGS" + LIBS="$save_LIBS" + ;; + esac + + case $lt_cv_dlopen_self in + yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; + *) enable_dlopen_self=unknown ;; + esac + + case $lt_cv_dlopen_self_static in + yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; + *) enable_dlopen_self_static=unknown ;; + esac +fi + + + + + + + + + + + + + + + + + +striplib= +old_striplib= +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether stripping libraries is possible" >&5 +$as_echo_n "checking whether stripping libraries is possible... " >&6; } +if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then + test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" + test -z "$striplib" && striplib="$STRIP --strip-unneeded" + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +else +# FIXME - insert some real tests, host_os isn't really good enough + case $host_os in + darwin*) + if test -n "$STRIP" ; then + striplib="$STRIP -x" + old_striplib="$STRIP -S" + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + fi + ;; + *) + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + ;; + esac +fi + + + + + + + + + + + + + # Report which library types will actually be built + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if libtool supports shared libraries" >&5 +$as_echo_n "checking if libtool supports shared libraries... " >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $can_build_shared" >&5 +$as_echo "$can_build_shared" >&6; } + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build shared libraries" >&5 +$as_echo_n "checking whether to build shared libraries... " >&6; } + test "$can_build_shared" = "no" && enable_shared=no + + # On AIX, shared libraries and static libraries use the same namespace, and + # are all built from PIC. + case $host_os in + aix3*) + test "$enable_shared" = yes && enable_static=no + if test -n "$RANLIB"; then + archive_cmds="$archive_cmds~\$RANLIB \$lib" + postinstall_cmds='$RANLIB $lib' + fi + ;; + + aix[4-9]*) + if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then + test "$enable_shared" = yes && enable_static=no + fi + ;; + esac + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_shared" >&5 +$as_echo "$enable_shared" >&6; } + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build static libraries" >&5 +$as_echo_n "checking whether to build static libraries... " >&6; } + # Make sure either enable_shared or enable_static is yes. + test "$enable_shared" = yes || enable_static=yes + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_static" >&5 +$as_echo "$enable_static" >&6; } + + + + +fi +ac_ext=cpp +ac_cpp='$CXXCPP $CPPFLAGS' +ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_cxx_compiler_gnu + +CC="$lt_save_CC" + + if test -n "$CXX" && ( test "X$CXX" != "Xno" && + ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || + (test "X$CXX" != "Xg++"))) ; then + ac_ext=cpp +ac_cpp='$CXXCPP $CPPFLAGS' +ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_cxx_compiler_gnu +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C++ preprocessor" >&5 +$as_echo_n "checking how to run the C++ preprocessor... " >&6; } +if test -z "$CXXCPP"; then + if ${ac_cv_prog_CXXCPP+:} false; then : + $as_echo_n "(cached) " >&6 +else + # Double quotes because CXXCPP needs to be expanded + for CXXCPP in "$CXX -E" "/lib/cpp" + do + ac_preproc_ok=false +for ac_cxx_preproc_warn_flag in '' yes +do + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer to if __STDC__ is defined, since + # exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#ifdef __STDC__ +# include +#else +# include +#endif + Syntax error +_ACEOF +if ac_fn_cxx_try_cpp "$LINENO"; then : + +else + # Broken: fails on valid input. +continue +fi +rm -f conftest.err conftest.i conftest.$ac_ext + + # OK, works on sane cases. Now check whether nonexistent headers + # can be detected and how. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +_ACEOF +if ac_fn_cxx_try_cpp "$LINENO"; then : + # Broken: success on invalid input. +continue +else + # Passes both tests. +ac_preproc_ok=: +break +fi +rm -f conftest.err conftest.i conftest.$ac_ext + +done +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.i conftest.err conftest.$ac_ext +if $ac_preproc_ok; then : + break +fi + + done + ac_cv_prog_CXXCPP=$CXXCPP + +fi + CXXCPP=$ac_cv_prog_CXXCPP +else + ac_cv_prog_CXXCPP=$CXXCPP +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CXXCPP" >&5 +$as_echo "$CXXCPP" >&6; } +ac_preproc_ok=false +for ac_cxx_preproc_warn_flag in '' yes +do + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer to if __STDC__ is defined, since + # exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#ifdef __STDC__ +# include +#else +# include +#endif + Syntax error +_ACEOF +if ac_fn_cxx_try_cpp "$LINENO"; then : + +else + # Broken: fails on valid input. +continue +fi +rm -f conftest.err conftest.i conftest.$ac_ext + + # OK, works on sane cases. Now check whether nonexistent headers + # can be detected and how. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +_ACEOF +if ac_fn_cxx_try_cpp "$LINENO"; then : + # Broken: success on invalid input. +continue +else + # Passes both tests. +ac_preproc_ok=: +break +fi +rm -f conftest.err conftest.i conftest.$ac_ext + +done +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.i conftest.err conftest.$ac_ext +if $ac_preproc_ok; then : + +else + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "C++ preprocessor \"$CXXCPP\" fails sanity check +See \`config.log' for more details" "$LINENO" 5; } +fi + +ac_ext=cpp +ac_cpp='$CXXCPP $CPPFLAGS' +ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_cxx_compiler_gnu + +else + _lt_caught_CXX_error=yes +fi + +ac_ext=cpp +ac_cpp='$CXXCPP $CPPFLAGS' +ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_cxx_compiler_gnu + +archive_cmds_need_lc_CXX=no +allow_undefined_flag_CXX= +always_export_symbols_CXX=no +archive_expsym_cmds_CXX= +compiler_needs_object_CXX=no +export_dynamic_flag_spec_CXX= +hardcode_direct_CXX=no +hardcode_direct_absolute_CXX=no +hardcode_libdir_flag_spec_CXX= +hardcode_libdir_flag_spec_ld_CXX= +hardcode_libdir_separator_CXX= +hardcode_minus_L_CXX=no +hardcode_shlibpath_var_CXX=unsupported +hardcode_automatic_CXX=no +inherit_rpath_CXX=no +module_cmds_CXX= +module_expsym_cmds_CXX= +link_all_deplibs_CXX=unknown +old_archive_cmds_CXX=$old_archive_cmds +reload_flag_CXX=$reload_flag +reload_cmds_CXX=$reload_cmds +no_undefined_flag_CXX= +whole_archive_flag_spec_CXX= +enable_shared_with_static_runtimes_CXX=no + +# Source file extension for C++ test sources. +ac_ext=cpp + +# Object file extension for compiled C++ test sources. +objext=o +objext_CXX=$objext + +# No sense in running all these tests if we already determined that +# the CXX compiler isn't working. Some variables (like enable_shared) +# are currently assumed to apply to all compilers on this platform, +# and will be corrupted by setting them based on a non-working compiler. +if test "$_lt_caught_CXX_error" != yes; then + # Code to be used in simple compile tests + lt_simple_compile_test_code="int some_variable = 0;" + + # Code to be used in simple link tests + lt_simple_link_test_code='int main(int, char *[]) { return(0); }' + + # ltmain only uses $CC for tagged configurations so make sure $CC is set. + + + + + + +# If no C compiler was specified, use CC. +LTCC=${LTCC-"$CC"} + +# If no C compiler flags were specified, use CFLAGS. +LTCFLAGS=${LTCFLAGS-"$CFLAGS"} + +# Allow CC to be a program name with arguments. +compiler=$CC + + + # save warnings/boilerplate of simple test code + ac_outfile=conftest.$ac_objext +echo "$lt_simple_compile_test_code" >conftest.$ac_ext +eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +_lt_compiler_boilerplate=`cat conftest.err` +$RM conftest* + + ac_outfile=conftest.$ac_objext +echo "$lt_simple_link_test_code" >conftest.$ac_ext +eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +_lt_linker_boilerplate=`cat conftest.err` +$RM -r conftest* + + + # Allow CC to be a program name with arguments. + lt_save_CC=$CC + lt_save_CFLAGS=$CFLAGS + lt_save_LD=$LD + lt_save_GCC=$GCC + GCC=$GXX + lt_save_with_gnu_ld=$with_gnu_ld + lt_save_path_LD=$lt_cv_path_LD + if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then + lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx + else + $as_unset lt_cv_prog_gnu_ld + fi + if test -n "${lt_cv_path_LDCXX+set}"; then + lt_cv_path_LD=$lt_cv_path_LDCXX + else + $as_unset lt_cv_path_LD + fi + test -z "${LDCXX+set}" || LD=$LDCXX + CC=${CXX-"c++"} + CFLAGS=$CXXFLAGS + compiler=$CC + compiler_CXX=$CC + for cc_temp in $compiler""; do + case $cc_temp in + compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; + distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; + \-*) ;; + *) break;; + esac +done +cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"` + + + if test -n "$compiler"; then + # We don't want -fno-exception when compiling C++ code, so set the + # no_builtin_flag separately + if test "$GXX" = yes; then + lt_prog_compiler_no_builtin_flag_CXX=' -fno-builtin' + else + lt_prog_compiler_no_builtin_flag_CXX= + fi + + if test "$GXX" = yes; then + # Set up default GNU C++ configuration + + + +# Check whether --with-gnu-ld was given. +if test "${with_gnu_ld+set}" = set; then : + withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes +else + with_gnu_ld=no +fi + +ac_prog=ld +if test "$GCC" = yes; then + # Check if gcc -print-prog-name=ld gives a path. + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5 +$as_echo_n "checking for ld used by $CC... " >&6; } + case $host in + *-*-mingw*) + # gcc leaves a trailing carriage return which upsets mingw + ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; + *) + ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; + esac + case $ac_prog in + # Accept absolute paths. + [\\/]* | ?:[\\/]*) + re_direlt='/[^/][^/]*/\.\./' + # Canonicalize the pathname of ld + ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'` + while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do + ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` + done + test -z "$LD" && LD="$ac_prog" + ;; + "") + # If it fails, then pretend we aren't using GCC. + ac_prog=ld + ;; + *) + # If it is relative, then search for the first ld in PATH. + with_gnu_ld=unknown + ;; + esac +elif test "$with_gnu_ld" = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5 +$as_echo_n "checking for GNU ld... " >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5 +$as_echo_n "checking for non-GNU ld... " >&6; } +fi +if ${lt_cv_path_LD+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -z "$LD"; then + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in $PATH; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then + lt_cv_path_LD="$ac_dir/$ac_prog" + # Check to see if the program is GNU ld. I'd rather use --version, + # but apparently some variants of GNU ld only accept -v. + # Break only if it was the GNU/non-GNU ld that we prefer. + case `"$lt_cv_path_LD" -v 2>&1 &5 +$as_echo "$LD" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi +test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5 +$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; } +if ${lt_cv_prog_gnu_ld+:} false; then : + $as_echo_n "(cached) " >&6 +else + # I'd rather use --version here, but apparently some GNU lds only accept -v. +case `$LD -v 2>&1 &5 +$as_echo "$lt_cv_prog_gnu_ld" >&6; } +with_gnu_ld=$lt_cv_prog_gnu_ld + + + + + + + + # Check if GNU C++ uses GNU ld as the underlying linker, since the + # archiving commands below assume that GNU ld is being used. + if test "$with_gnu_ld" = yes; then + archive_cmds_CXX='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds_CXX='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + + hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' + export_dynamic_flag_spec_CXX='${wl}--export-dynamic' + + # If archive_cmds runs LD, not CC, wlarc should be empty + # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to + # investigate it a little bit more. (MM) + wlarc='${wl}' + + # ancient GNU ld didn't support --whole-archive et. al. + if eval "`$CC -print-prog-name=ld` --help 2>&1" | + $GREP 'no-whole-archive' > /dev/null; then + whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + else + whole_archive_flag_spec_CXX= + fi + else + with_gnu_ld=no + wlarc= + + # A generic and very simple default shared library creation + # command for GNU C++ for the case where it uses the native + # linker, instead of GNU ld. If possible, this setting should + # overridden to take advantage of the native linker features on + # the platform it is being used on. + archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' + fi + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' + + else + GXX=no + with_gnu_ld=no + wlarc= + fi + + # PORTME: fill in a description of your system's C++ link characteristics + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5 +$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } + ld_shlibs_CXX=yes + case $host_os in + aix3*) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + aix[4-9]*) + if test "$host_cpu" = ia64; then + # On IA64, the linker does run time linking by default, so we don't + # have to do anything special. + aix_use_runtimelinking=no + exp_sym_flag='-Bexport' + no_entry_flag="" + else + aix_use_runtimelinking=no + + # Test if we are trying to use run time linking or normal + # AIX style linking. If -brtl is somewhere in LDFLAGS, we + # need to do runtime linking. + case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) + for ld_flag in $LDFLAGS; do + case $ld_flag in + *-brtl*) + aix_use_runtimelinking=yes + break + ;; + esac + done + ;; + esac + + exp_sym_flag='-bexport' + no_entry_flag='-bnoentry' + fi + + # When large executables or shared objects are built, AIX ld can + # have problems creating the table of contents. If linking a library + # or program results in "error TOC overflow" add -mminimal-toc to + # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not + # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. + + archive_cmds_CXX='' + hardcode_direct_CXX=yes + hardcode_direct_absolute_CXX=yes + hardcode_libdir_separator_CXX=':' + link_all_deplibs_CXX=yes + file_list_spec_CXX='${wl}-f,' + + if test "$GXX" = yes; then + case $host_os in aix4.[012]|aix4.[012].*) + # We only want to do this on AIX 4.2 and lower, the check + # below for broken collect2 doesn't work under 4.3+ + collect2name=`${CC} -print-prog-name=collect2` + if test -f "$collect2name" && + strings "$collect2name" | $GREP resolve_lib_name >/dev/null + then + # We have reworked collect2 + : + else + # We have old collect2 + hardcode_direct_CXX=unsupported + # It fails to find uninstalled libraries when the uninstalled + # path is not listed in the libpath. Setting hardcode_minus_L + # to unsupported forces relinking + hardcode_minus_L_CXX=yes + hardcode_libdir_flag_spec_CXX='-L$libdir' + hardcode_libdir_separator_CXX= + fi + esac + shared_flag='-shared' + if test "$aix_use_runtimelinking" = yes; then + shared_flag="$shared_flag "'${wl}-G' + fi + else + # not using gcc + if test "$host_cpu" = ia64; then + # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release + # chokes on -Wl,-G. The following line is correct: + shared_flag='-G' + else + if test "$aix_use_runtimelinking" = yes; then + shared_flag='${wl}-G' + else + shared_flag='${wl}-bM:SRE' + fi + fi + fi + + export_dynamic_flag_spec_CXX='${wl}-bexpall' + # It seems that -bexpall does not export symbols beginning with + # underscore (_), so it is better to generate a list of symbols to + # export. + always_export_symbols_CXX=yes + if test "$aix_use_runtimelinking" = yes; then + # Warning - without using the other runtime loading flags (-brtl), + # -berok will link without error, but may produce a broken library. + allow_undefined_flag_CXX='-berok' + # Determine the default libpath from the value encoded in an empty + # executable. + if test "${lt_cv_aix_libpath+set}" = set; then + aix_libpath=$lt_cv_aix_libpath +else + if ${lt_cv_aix_libpath__CXX+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_cxx_try_link "$LINENO"; then : + + lt_aix_libpath_sed=' + /Import File Strings/,/^$/ { + /^0/ { + s/^0 *\([^ ]*\) *$/\1/ + p + } + }' + lt_cv_aix_libpath__CXX=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + # Check for a 64-bit object if we didn't find anything. + if test -z "$lt_cv_aix_libpath__CXX"; then + lt_cv_aix_libpath__CXX=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + fi +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + if test -z "$lt_cv_aix_libpath__CXX"; then + lt_cv_aix_libpath__CXX="/usr/lib:/lib" + fi + +fi + + aix_libpath=$lt_cv_aix_libpath__CXX +fi + + hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath" + + archive_expsym_cmds_CXX='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" + else + if test "$host_cpu" = ia64; then + hardcode_libdir_flag_spec_CXX='${wl}-R $libdir:/usr/lib:/lib' + allow_undefined_flag_CXX="-z nodefs" + archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" + else + # Determine the default libpath from the value encoded in an + # empty executable. + if test "${lt_cv_aix_libpath+set}" = set; then + aix_libpath=$lt_cv_aix_libpath +else + if ${lt_cv_aix_libpath__CXX+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_cxx_try_link "$LINENO"; then : + + lt_aix_libpath_sed=' + /Import File Strings/,/^$/ { + /^0/ { + s/^0 *\([^ ]*\) *$/\1/ + p + } + }' + lt_cv_aix_libpath__CXX=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + # Check for a 64-bit object if we didn't find anything. + if test -z "$lt_cv_aix_libpath__CXX"; then + lt_cv_aix_libpath__CXX=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + fi +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + if test -z "$lt_cv_aix_libpath__CXX"; then + lt_cv_aix_libpath__CXX="/usr/lib:/lib" + fi + +fi + + aix_libpath=$lt_cv_aix_libpath__CXX +fi + + hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath" + # Warning - without using the other run time loading flags, + # -berok will link without error, but may produce a broken library. + no_undefined_flag_CXX=' ${wl}-bernotok' + allow_undefined_flag_CXX=' ${wl}-berok' + if test "$with_gnu_ld" = yes; then + # We only use this code for GNU lds that support --whole-archive. + whole_archive_flag_spec_CXX='${wl}--whole-archive$convenience ${wl}--no-whole-archive' + else + # Exported symbols can be pulled into shared objects from archives + whole_archive_flag_spec_CXX='$convenience' + fi + archive_cmds_need_lc_CXX=yes + # This is similar to how AIX traditionally builds its shared + # libraries. + archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + fi + fi + ;; + + beos*) + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + allow_undefined_flag_CXX=unsupported + # Joseph Beckenbach says some releases of gcc + # support --undefined. This deserves some investigation. FIXME + archive_cmds_CXX='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + else + ld_shlibs_CXX=no + fi + ;; + + chorus*) + case $cc_basename in + *) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + esac + ;; + + cygwin* | mingw* | pw32* | cegcc*) + case $GXX,$cc_basename in + ,cl* | no,cl*) + # Native MSVC + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. + hardcode_libdir_flag_spec_CXX=' ' + allow_undefined_flag_CXX=unsupported + always_export_symbols_CXX=yes + file_list_spec_CXX='@' + # Tell ltmain to make .lib files, not .a files. + libext=lib + # Tell ltmain to make .dll files, not .so files. + shrext_cmds=".dll" + # FIXME: Setting linknames here is a bad hack. + archive_cmds_CXX='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames=' + archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then + $SED -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp; + else + $SED -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp; + fi~ + $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ + linknames=' + # The linker will not automatically build a static lib if we build a DLL. + # _LT_TAGVAR(old_archive_from_new_cmds, CXX)='true' + enable_shared_with_static_runtimes_CXX=yes + # Don't use ranlib + old_postinstall_cmds_CXX='chmod 644 $oldlib' + postlink_cmds_CXX='lt_outputfile="@OUTPUT@"~ + lt_tool_outputfile="@TOOL_OUTPUT@"~ + case $lt_outputfile in + *.exe|*.EXE) ;; + *) + lt_outputfile="$lt_outputfile.exe" + lt_tool_outputfile="$lt_tool_outputfile.exe" + ;; + esac~ + func_to_tool_file "$lt_outputfile"~ + if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then + $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; + $RM "$lt_outputfile.manifest"; + fi' + ;; + *) + # g++ + # _LT_TAGVAR(hardcode_libdir_flag_spec, CXX) is actually meaningless, + # as there is no search path for DLLs. + hardcode_libdir_flag_spec_CXX='-L$libdir' + export_dynamic_flag_spec_CXX='${wl}--export-all-symbols' + allow_undefined_flag_CXX=unsupported + always_export_symbols_CXX=no + enable_shared_with_static_runtimes_CXX=yes + + if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then + archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + # If the export-symbols file already is a .def file (1st line + # is EXPORTS), use it as is; otherwise, prepend... + archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then + cp $export_symbols $output_objdir/$soname.def; + else + echo EXPORTS > $output_objdir/$soname.def; + cat $export_symbols >> $output_objdir/$soname.def; + fi~ + $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + else + ld_shlibs_CXX=no + fi + ;; + esac + ;; + darwin* | rhapsody*) + + + archive_cmds_need_lc_CXX=no + hardcode_direct_CXX=no + hardcode_automatic_CXX=yes + hardcode_shlibpath_var_CXX=unsupported + if test "$lt_cv_ld_force_load" = "yes"; then + whole_archive_flag_spec_CXX='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`' + else + whole_archive_flag_spec_CXX='' + fi + link_all_deplibs_CXX=yes + allow_undefined_flag_CXX="$_lt_dar_allow_undefined" + case $cc_basename in + ifort*) _lt_dar_can_shared=yes ;; + *) _lt_dar_can_shared=$GCC ;; + esac + if test "$_lt_dar_can_shared" = "yes"; then + output_verbose_link_cmd=func_echo_all + archive_cmds_CXX="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" + module_cmds_CXX="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" + archive_expsym_cmds_CXX="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" + module_expsym_cmds_CXX="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" + if test "$lt_cv_apple_cc_single_mod" != "yes"; then + archive_cmds_CXX="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}" + archive_expsym_cmds_CXX="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}" + fi + + else + ld_shlibs_CXX=no + fi + + ;; + + dgux*) + case $cc_basename in + ec++*) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + ghcx*) + # Green Hills C++ Compiler + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + *) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + esac + ;; + + freebsd[12]*) + # C++ shared libraries reported to be fairly broken before + # switch to ELF + ld_shlibs_CXX=no + ;; + + freebsd-elf*) + archive_cmds_need_lc_CXX=no + ;; + + freebsd* | dragonfly*) + # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF + # conventions + ld_shlibs_CXX=yes + ;; + + gnu*) + ;; + + haiku*) + archive_cmds_CXX='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + link_all_deplibs_CXX=yes + ;; + + hpux9*) + hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir' + hardcode_libdir_separator_CXX=: + export_dynamic_flag_spec_CXX='${wl}-E' + hardcode_direct_CXX=yes + hardcode_minus_L_CXX=yes # Not in the search PATH, + # but as the default + # location of the library. + + case $cc_basename in + CC*) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + aCC*) + archive_cmds_CXX='$RM $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' + ;; + *) + if test "$GXX" = yes; then + archive_cmds_CXX='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + else + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + fi + ;; + esac + ;; + + hpux10*|hpux11*) + if test $with_gnu_ld = no; then + hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir' + hardcode_libdir_separator_CXX=: + + case $host_cpu in + hppa*64*|ia64*) + ;; + *) + export_dynamic_flag_spec_CXX='${wl}-E' + ;; + esac + fi + case $host_cpu in + hppa*64*|ia64*) + hardcode_direct_CXX=no + hardcode_shlibpath_var_CXX=no + ;; + *) + hardcode_direct_CXX=yes + hardcode_direct_absolute_CXX=yes + hardcode_minus_L_CXX=yes # Not in the search PATH, + # but as the default + # location of the library. + ;; + esac + + case $cc_basename in + CC*) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + aCC*) + case $host_cpu in + hppa*64*) + archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + ia64*) + archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + *) + archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + esac + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' + ;; + *) + if test "$GXX" = yes; then + if test $with_gnu_ld = no; then + case $host_cpu in + hppa*64*) + archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + ia64*) + archive_cmds_CXX='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + *) + archive_cmds_CXX='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + esac + fi + else + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + fi + ;; + esac + ;; + + interix[3-9]*) + hardcode_direct_CXX=no + hardcode_shlibpath_var_CXX=no + hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' + export_dynamic_flag_spec_CXX='${wl}-E' + # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. + # Instead, shared libraries are loaded at an image base (0x10000000 by + # default) and relocated if they conflict, which is a slow very memory + # consuming and fragmenting process. To avoid this, we pick a random, + # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link + # time. Moving up from 0x10000000 also allows more sbrk(2) space. + archive_cmds_CXX='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + archive_expsym_cmds_CXX='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + ;; + irix5* | irix6*) + case $cc_basename in + CC*) + # SGI C++ + archive_cmds_CXX='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + + # Archives containing C++ object files must be created using + # "CC -ar", where "CC" is the IRIX C++ compiler. This is + # necessary to make sure instantiated templates are included + # in the archive. + old_archive_cmds_CXX='$CC -ar -WR,-u -o $oldlib $oldobjs' + ;; + *) + if test "$GXX" = yes; then + if test "$with_gnu_ld" = no; then + archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + else + archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` -o $lib' + fi + fi + link_all_deplibs_CXX=yes + ;; + esac + hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator_CXX=: + inherit_rpath_CXX=yes + ;; + + linux* | k*bsd*-gnu | kopensolaris*-gnu) + case $cc_basename in + KCC*) + # Kuck and Associates, Inc. (KAI) C++ Compiler + + # KCC will only create a shared library if the output file + # ends with ".so" (or ".sl" for HP-UX), so rename the library + # to its proper name (with version) after linking. + archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' + archive_expsym_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib' + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' + + hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' + export_dynamic_flag_spec_CXX='${wl}--export-dynamic' + + # Archives containing C++ object files must be created using + # "CC -Bstatic", where "CC" is the KAI C++ compiler. + old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs' + ;; + icpc* | ecpc* ) + # Intel C++ + with_gnu_ld=yes + # version 8.0 and above of icpc choke on multiply defined symbols + # if we add $predep_objects and $postdep_objects, however 7.1 and + # earlier do not add the objects themselves. + case `$CC -V 2>&1` in + *"Version 7."*) + archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + ;; + *) # Version 8.0 or newer + tmp_idyn= + case $host_cpu in + ia64*) tmp_idyn=' -i_dynamic';; + esac + archive_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + ;; + esac + archive_cmds_need_lc_CXX=no + hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' + export_dynamic_flag_spec_CXX='${wl}--export-dynamic' + whole_archive_flag_spec_CXX='${wl}--whole-archive$convenience ${wl}--no-whole-archive' + ;; + pgCC* | pgcpp*) + # Portland Group C++ compiler + case `$CC -V` in + *pgCC\ [1-5].* | *pgcpp\ [1-5].*) + prelink_cmds_CXX='tpldir=Template.dir~ + rm -rf $tpldir~ + $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~ + compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"' + old_archive_cmds_CXX='tpldir=Template.dir~ + rm -rf $tpldir~ + $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~ + $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~ + $RANLIB $oldlib' + archive_cmds_CXX='tpldir=Template.dir~ + rm -rf $tpldir~ + $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ + $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' + archive_expsym_cmds_CXX='tpldir=Template.dir~ + rm -rf $tpldir~ + $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ + $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' + ;; + *) # Version 6 and above use weak symbols + archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' + archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' + ;; + esac + + hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir' + export_dynamic_flag_spec_CXX='${wl}--export-dynamic' + whole_archive_flag_spec_CXX='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + ;; + cxx*) + # Compaq C++ + archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols' + + runpath_var=LD_RUN_PATH + hardcode_libdir_flag_spec_CXX='-rpath $libdir' + hardcode_libdir_separator_CXX=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed' + ;; + xl* | mpixl* | bgxl*) + # IBM XL 8.0 on PPC, with GNU ld + hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' + export_dynamic_flag_spec_CXX='${wl}--export-dynamic' + archive_cmds_CXX='$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + if test "x$supports_anon_versioning" = xyes; then + archive_expsym_cmds_CXX='echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ + $CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' + fi + ;; + *) + case `$CC -V 2>&1 | sed 5q` in + *Sun\ C*) + # Sun C++ 5.9 + no_undefined_flag_CXX=' -zdefs' + archive_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + archive_expsym_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols' + hardcode_libdir_flag_spec_CXX='-R$libdir' + whole_archive_flag_spec_CXX='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + compiler_needs_object_CXX=yes + + # Not sure whether something based on + # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 + # would be better. + output_verbose_link_cmd='func_echo_all' + + # Archives containing C++ object files must be created using + # "CC -xar", where "CC" is the Sun C++ compiler. This is + # necessary to make sure instantiated templates are included + # in the archive. + old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs' + ;; + esac + ;; + esac + ;; + + lynxos*) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + + m88k*) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + + mvs*) + case $cc_basename in + cxx*) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + *) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + esac + ;; + + netbsd*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + archive_cmds_CXX='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags' + wlarc= + hardcode_libdir_flag_spec_CXX='-R$libdir' + hardcode_direct_CXX=yes + hardcode_shlibpath_var_CXX=no + fi + # Workaround some broken pre-1.5 toolchains + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"' + ;; + + *nto* | *qnx*) + ld_shlibs_CXX=yes + ;; + + openbsd2*) + # C++ shared libraries are fairly broken + ld_shlibs_CXX=no + ;; + + openbsd*) + if test -f /usr/libexec/ld.so; then + hardcode_direct_CXX=yes + hardcode_shlibpath_var_CXX=no + hardcode_direct_absolute_CXX=yes + archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' + hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib' + export_dynamic_flag_spec_CXX='${wl}-E' + whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + fi + output_verbose_link_cmd=func_echo_all + else + ld_shlibs_CXX=no + fi + ;; + + osf3* | osf4* | osf5*) + case $cc_basename in + KCC*) + # Kuck and Associates, Inc. (KAI) C++ Compiler + + # KCC will only create a shared library if the output file + # ends with ".so" (or ".sl" for HP-UX), so rename the library + # to its proper name (with version) after linking. + archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' + + hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' + hardcode_libdir_separator_CXX=: + + # Archives containing C++ object files must be created using + # the KAI C++ compiler. + case $host in + osf3*) old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs' ;; + *) old_archive_cmds_CXX='$CC -o $oldlib $oldobjs' ;; + esac + ;; + RCC*) + # Rational C++ 2.4.1 + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + cxx*) + case $host in + osf3*) + allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*' + archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && func_echo_all "${wl}-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' + ;; + *) + allow_undefined_flag_CXX=' -expect_unresolved \*' + archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + archive_expsym_cmds_CXX='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~ + echo "-hidden">> $lib.exp~ + $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~ + $RM $lib.exp' + hardcode_libdir_flag_spec_CXX='-rpath $libdir' + ;; + esac + + hardcode_libdir_separator_CXX=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' + ;; + *) + if test "$GXX" = yes && test "$with_gnu_ld" = no; then + allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*' + case $host in + osf3*) + archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + ;; + *) + archive_cmds_CXX='$CC -shared $pic_flag -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + ;; + esac + + hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator_CXX=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' + + else + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + fi + ;; + esac + ;; + + psos*) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + + sunos4*) + case $cc_basename in + CC*) + # Sun C++ 4.x + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + lcc*) + # Lucid + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + *) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + esac + ;; + + solaris*) + case $cc_basename in + CC* | sunCC*) + # Sun C++ 4.2, 5.x and Centerline C++ + archive_cmds_need_lc_CXX=yes + no_undefined_flag_CXX=' -zdefs' + archive_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + archive_expsym_cmds_CXX='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' + + hardcode_libdir_flag_spec_CXX='-R$libdir' + hardcode_shlibpath_var_CXX=no + case $host_os in + solaris2.[0-5] | solaris2.[0-5].*) ;; + *) + # The compiler driver will combine and reorder linker options, + # but understands `-z linker_flag'. + # Supported since Solaris 2.6 (maybe 2.5.1?) + whole_archive_flag_spec_CXX='-z allextract$convenience -z defaultextract' + ;; + esac + link_all_deplibs_CXX=yes + + output_verbose_link_cmd='func_echo_all' + + # Archives containing C++ object files must be created using + # "CC -xar", where "CC" is the Sun C++ compiler. This is + # necessary to make sure instantiated templates are included + # in the archive. + old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs' + ;; + gcx*) + # Green Hills C++ Compiler + archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' + + # The C++ compiler must be used to create the archive. + old_archive_cmds_CXX='$CC $LDFLAGS -archive -o $oldlib $oldobjs' + ;; + *) + # GNU C++ compiler with Solaris linker + if test "$GXX" = yes && test "$with_gnu_ld" = no; then + no_undefined_flag_CXX=' ${wl}-z ${wl}defs' + if $CC --version | $GREP -v '^2\.7' > /dev/null; then + archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' + archive_expsym_cmds_CXX='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -shared $pic_flag -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' + else + # g++ 2.7 appears to require `-G' NOT `-shared' on this + # platform. + archive_cmds_CXX='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' + archive_expsym_cmds_CXX='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' + fi + + hardcode_libdir_flag_spec_CXX='${wl}-R $wl$libdir' + case $host_os in + solaris2.[0-5] | solaris2.[0-5].*) ;; + *) + whole_archive_flag_spec_CXX='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' + ;; + esac + fi + ;; + esac + ;; + + sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) + no_undefined_flag_CXX='${wl}-z,text' + archive_cmds_need_lc_CXX=no + hardcode_shlibpath_var_CXX=no + runpath_var='LD_RUN_PATH' + + case $cc_basename in + CC*) + archive_cmds_CXX='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + archive_cmds_CXX='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + ;; + + sysv5* | sco3.2v5* | sco5v6*) + # Note: We can NOT use -z defs as we might desire, because we do not + # link with -lc, and that would cause any symbols used from libc to + # always be unresolved, which means just about no library would + # ever link correctly. If we're not using GNU ld we use -z text + # though, which does catch some bad symbols but isn't as heavy-handed + # as -z defs. + no_undefined_flag_CXX='${wl}-z,text' + allow_undefined_flag_CXX='${wl}-z,nodefs' + archive_cmds_need_lc_CXX=no + hardcode_shlibpath_var_CXX=no + hardcode_libdir_flag_spec_CXX='${wl}-R,$libdir' + hardcode_libdir_separator_CXX=':' + link_all_deplibs_CXX=yes + export_dynamic_flag_spec_CXX='${wl}-Bexport' + runpath_var='LD_RUN_PATH' + + case $cc_basename in + CC*) + archive_cmds_CXX='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + old_archive_cmds_CXX='$CC -Tprelink_objects $oldobjs~ + '"$old_archive_cmds_CXX" + reload_cmds_CXX='$CC -Tprelink_objects $reload_objs~ + '"$reload_cmds_CXX" + ;; + *) + archive_cmds_CXX='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + ;; + + tandem*) + case $cc_basename in + NCC*) + # NonStop-UX NCC 3.20 + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + *) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + esac + ;; + + vxworks*) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + + *) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + esac + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs_CXX" >&5 +$as_echo "$ld_shlibs_CXX" >&6; } + test "$ld_shlibs_CXX" = no && can_build_shared=no + + GCC_CXX="$GXX" + LD_CXX="$LD" + + ## CAVEAT EMPTOR: + ## There is no encapsulation within the following macros, do not change + ## the running order or otherwise move them around unless you know exactly + ## what you are doing... + # Dependencies to place before and after the object being linked: +predep_objects_CXX= +postdep_objects_CXX= +predeps_CXX= +postdeps_CXX= +compiler_lib_search_path_CXX= + +cat > conftest.$ac_ext <<_LT_EOF +class Foo +{ +public: + Foo (void) { a = 0; } +private: + int a; +}; +_LT_EOF + + +_lt_libdeps_save_CFLAGS=$CFLAGS +case "$CC $CFLAGS " in #( +*\ -flto*\ *) CFLAGS="$CFLAGS -fno-lto" ;; +*\ -fwhopr*\ *) CFLAGS="$CFLAGS -fno-whopr" ;; +esac + +if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + # Parse the compiler output and extract the necessary + # objects, libraries and library flags. + + # Sentinel used to keep track of whether or not we are before + # the conftest object file. + pre_test_object_deps_done=no + + for p in `eval "$output_verbose_link_cmd"`; do + case ${prev}${p} in + + -L* | -R* | -l*) + # Some compilers place space between "-{L,R}" and the path. + # Remove the space. + if test $p = "-L" || + test $p = "-R"; then + prev=$p + continue + fi + + # Expand the sysroot to ease extracting the directories later. + if test -z "$prev"; then + case $p in + -L*) func_stripname_cnf '-L' '' "$p"; prev=-L; p=$func_stripname_result ;; + -R*) func_stripname_cnf '-R' '' "$p"; prev=-R; p=$func_stripname_result ;; + -l*) func_stripname_cnf '-l' '' "$p"; prev=-l; p=$func_stripname_result ;; + esac + fi + case $p in + =*) func_stripname_cnf '=' '' "$p"; p=$lt_sysroot$func_stripname_result ;; + esac + if test "$pre_test_object_deps_done" = no; then + case ${prev} in + -L | -R) + # Internal compiler library paths should come after those + # provided the user. The postdeps already come after the + # user supplied libs so there is no need to process them. + if test -z "$compiler_lib_search_path_CXX"; then + compiler_lib_search_path_CXX="${prev}${p}" + else + compiler_lib_search_path_CXX="${compiler_lib_search_path_CXX} ${prev}${p}" + fi + ;; + # The "-l" case would never come before the object being + # linked, so don't bother handling this case. + esac + else + if test -z "$postdeps_CXX"; then + postdeps_CXX="${prev}${p}" + else + postdeps_CXX="${postdeps_CXX} ${prev}${p}" + fi + fi + prev= + ;; + + *.lto.$objext) ;; # Ignore GCC LTO objects + *.$objext) + # This assumes that the test object file only shows up + # once in the compiler output. + if test "$p" = "conftest.$objext"; then + pre_test_object_deps_done=yes + continue + fi + + if test "$pre_test_object_deps_done" = no; then + if test -z "$predep_objects_CXX"; then + predep_objects_CXX="$p" + else + predep_objects_CXX="$predep_objects_CXX $p" + fi + else + if test -z "$postdep_objects_CXX"; then + postdep_objects_CXX="$p" + else + postdep_objects_CXX="$postdep_objects_CXX $p" + fi + fi + ;; + + *) ;; # Ignore the rest. + + esac + done + + # Clean up. + rm -f a.out a.exe +else + echo "libtool.m4: error: problem compiling CXX test program" +fi + +$RM -f confest.$objext +CFLAGS=$_lt_libdeps_save_CFLAGS + +# PORTME: override above test on systems where it is broken +case $host_os in +interix[3-9]*) + # Interix 3.5 installs completely hosed .la files for C++, so rather than + # hack all around it, let's just trust "g++" to DTRT. + predep_objects_CXX= + postdep_objects_CXX= + postdeps_CXX= + ;; + +linux*) + case `$CC -V 2>&1 | sed 5q` in + *Sun\ C*) + # Sun C++ 5.9 + + # The more standards-conforming stlport4 library is + # incompatible with the Cstd library. Avoid specifying + # it if it's in CXXFLAGS. Ignore libCrun as + # -library=stlport4 depends on it. + case " $CXX $CXXFLAGS " in + *" -library=stlport4 "*) + solaris_use_stlport4=yes + ;; + esac + + if test "$solaris_use_stlport4" != yes; then + postdeps_CXX='-library=Cstd -library=Crun' + fi + ;; + esac + ;; + +solaris*) + case $cc_basename in + CC* | sunCC*) + # The more standards-conforming stlport4 library is + # incompatible with the Cstd library. Avoid specifying + # it if it's in CXXFLAGS. Ignore libCrun as + # -library=stlport4 depends on it. + case " $CXX $CXXFLAGS " in + *" -library=stlport4 "*) + solaris_use_stlport4=yes + ;; + esac + + # Adding this requires a known-good setup of shared libraries for + # Sun compiler versions before 5.6, else PIC objects from an old + # archive will be linked into the output, leading to subtle bugs. + if test "$solaris_use_stlport4" != yes; then + postdeps_CXX='-library=Cstd -library=Crun' + fi + ;; + esac + ;; +esac + + +case " $postdeps_CXX " in +*" -lc "*) archive_cmds_need_lc_CXX=no ;; +esac + compiler_lib_search_dirs_CXX= +if test -n "${compiler_lib_search_path_CXX}"; then + compiler_lib_search_dirs_CXX=`echo " ${compiler_lib_search_path_CXX}" | ${SED} -e 's! -L! !g' -e 's!^ !!'` +fi + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + lt_prog_compiler_wl_CXX= +lt_prog_compiler_pic_CXX= +lt_prog_compiler_static_CXX= + + + # C++ specific cases for pic, static, wl, etc. + if test "$GXX" = yes; then + lt_prog_compiler_wl_CXX='-Wl,' + lt_prog_compiler_static_CXX='-static' + + case $host_os in + aix*) + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + lt_prog_compiler_static_CXX='-Bstatic' + fi + ;; + + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + lt_prog_compiler_pic_CXX='-fPIC' + ;; + m68k) + # FIXME: we need at least 68020 code to build shared libraries, but + # adding the `-m68020' flag to GCC prevents building anything better, + # like `-m68040'. + lt_prog_compiler_pic_CXX='-m68020 -resident32 -malways-restore-a4' + ;; + esac + ;; + + beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) + # PIC is the default for these OSes. + ;; + mingw* | cygwin* | os2* | pw32* | cegcc*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + # Although the cygwin gcc ignores -fPIC, still need this for old-style + # (--disable-auto-import) libraries + lt_prog_compiler_pic_CXX='-DDLL_EXPORT' + ;; + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + lt_prog_compiler_pic_CXX='-fno-common' + ;; + *djgpp*) + # DJGPP does not support shared libraries at all + lt_prog_compiler_pic_CXX= + ;; + haiku*) + # PIC is the default for Haiku. + # The "-static" flag exists, but is broken. + lt_prog_compiler_static_CXX= + ;; + interix[3-9]*) + # Interix 3.x gcc -fpic/-fPIC options generate broken code. + # Instead, we relocate shared libraries at runtime. + ;; + sysv4*MP*) + if test -d /usr/nec; then + lt_prog_compiler_pic_CXX=-Kconform_pic + fi + ;; + hpux*) + # PIC is the default for 64-bit PA HP-UX, but not for 32-bit + # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag + # sets the default TLS model and affects inlining. + case $host_cpu in + hppa*64*) + ;; + *) + lt_prog_compiler_pic_CXX='-fPIC' + ;; + esac + ;; + *qnx* | *nto*) + # QNX uses GNU C++, but need to define -shared option too, otherwise + # it will coredump. + lt_prog_compiler_pic_CXX='-fPIC -shared' + ;; + *) + lt_prog_compiler_pic_CXX='-fPIC' + ;; + esac + else + case $host_os in + aix[4-9]*) + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + lt_prog_compiler_static_CXX='-Bstatic' + else + lt_prog_compiler_static_CXX='-bnso -bI:/lib/syscalls.exp' + fi + ;; + chorus*) + case $cc_basename in + cxch68*) + # Green Hills C++ Compiler + # _LT_TAGVAR(lt_prog_compiler_static, CXX)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a" + ;; + esac + ;; + mingw* | cygwin* | os2* | pw32* | cegcc*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + lt_prog_compiler_pic_CXX='-DDLL_EXPORT' + ;; + dgux*) + case $cc_basename in + ec++*) + lt_prog_compiler_pic_CXX='-KPIC' + ;; + ghcx*) + # Green Hills C++ Compiler + lt_prog_compiler_pic_CXX='-pic' + ;; + *) + ;; + esac + ;; + freebsd* | dragonfly*) + # FreeBSD uses GNU C++ + ;; + hpux9* | hpux10* | hpux11*) + case $cc_basename in + CC*) + lt_prog_compiler_wl_CXX='-Wl,' + lt_prog_compiler_static_CXX='${wl}-a ${wl}archive' + if test "$host_cpu" != ia64; then + lt_prog_compiler_pic_CXX='+Z' + fi + ;; + aCC*) + lt_prog_compiler_wl_CXX='-Wl,' + lt_prog_compiler_static_CXX='${wl}-a ${wl}archive' + case $host_cpu in + hppa*64*|ia64*) + # +Z the default + ;; + *) + lt_prog_compiler_pic_CXX='+Z' + ;; + esac + ;; + *) + ;; + esac + ;; + interix*) + # This is c89, which is MS Visual C++ (no shared libs) + # Anyone wants to do a port? + ;; + irix5* | irix6* | nonstopux*) + case $cc_basename in + CC*) + lt_prog_compiler_wl_CXX='-Wl,' + lt_prog_compiler_static_CXX='-non_shared' + # CC pic flag -KPIC is the default. + ;; + *) + ;; + esac + ;; + linux* | k*bsd*-gnu | kopensolaris*-gnu) + case $cc_basename in + KCC*) + # KAI C++ Compiler + lt_prog_compiler_wl_CXX='--backend -Wl,' + lt_prog_compiler_pic_CXX='-fPIC' + ;; + ecpc* ) + # old Intel C++ for x86_64 which still supported -KPIC. + lt_prog_compiler_wl_CXX='-Wl,' + lt_prog_compiler_pic_CXX='-KPIC' + lt_prog_compiler_static_CXX='-static' + ;; + icpc* ) + # Intel C++, used to be incompatible with GCC. + # ICC 10 doesn't accept -KPIC any more. + lt_prog_compiler_wl_CXX='-Wl,' + lt_prog_compiler_pic_CXX='-fPIC' + lt_prog_compiler_static_CXX='-static' + ;; + pgCC* | pgcpp*) + # Portland Group C++ compiler + lt_prog_compiler_wl_CXX='-Wl,' + lt_prog_compiler_pic_CXX='-fpic' + lt_prog_compiler_static_CXX='-Bstatic' + ;; + cxx*) + # Compaq C++ + # Make sure the PIC flag is empty. It appears that all Alpha + # Linux and Compaq Tru64 Unix objects are PIC. + lt_prog_compiler_pic_CXX= + lt_prog_compiler_static_CXX='-non_shared' + ;; + xlc* | xlC* | bgxl[cC]* | mpixl[cC]*) + # IBM XL 8.0, 9.0 on PPC and BlueGene + lt_prog_compiler_wl_CXX='-Wl,' + lt_prog_compiler_pic_CXX='-qpic' + lt_prog_compiler_static_CXX='-qstaticlink' + ;; + *) + case `$CC -V 2>&1 | sed 5q` in + *Sun\ C*) + # Sun C++ 5.9 + lt_prog_compiler_pic_CXX='-KPIC' + lt_prog_compiler_static_CXX='-Bstatic' + lt_prog_compiler_wl_CXX='-Qoption ld ' + ;; + esac + ;; + esac + ;; + lynxos*) + ;; + m88k*) + ;; + mvs*) + case $cc_basename in + cxx*) + lt_prog_compiler_pic_CXX='-W c,exportall' + ;; + *) + ;; + esac + ;; + netbsd* | netbsdelf*-gnu) + ;; + *qnx* | *nto*) + # QNX uses GNU C++, but need to define -shared option too, otherwise + # it will coredump. + lt_prog_compiler_pic_CXX='-fPIC -shared' + ;; + osf3* | osf4* | osf5*) + case $cc_basename in + KCC*) + lt_prog_compiler_wl_CXX='--backend -Wl,' + ;; + RCC*) + # Rational C++ 2.4.1 + lt_prog_compiler_pic_CXX='-pic' + ;; + cxx*) + # Digital/Compaq C++ + lt_prog_compiler_wl_CXX='-Wl,' + # Make sure the PIC flag is empty. It appears that all Alpha + # Linux and Compaq Tru64 Unix objects are PIC. + lt_prog_compiler_pic_CXX= + lt_prog_compiler_static_CXX='-non_shared' + ;; + *) + ;; + esac + ;; + psos*) + ;; + solaris*) + case $cc_basename in + CC* | sunCC*) + # Sun C++ 4.2, 5.x and Centerline C++ + lt_prog_compiler_pic_CXX='-KPIC' + lt_prog_compiler_static_CXX='-Bstatic' + lt_prog_compiler_wl_CXX='-Qoption ld ' + ;; + gcx*) + # Green Hills C++ Compiler + lt_prog_compiler_pic_CXX='-PIC' + ;; + *) + ;; + esac + ;; + sunos4*) + case $cc_basename in + CC*) + # Sun C++ 4.x + lt_prog_compiler_pic_CXX='-pic' + lt_prog_compiler_static_CXX='-Bstatic' + ;; + lcc*) + # Lucid + lt_prog_compiler_pic_CXX='-pic' + ;; + *) + ;; + esac + ;; + sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) + case $cc_basename in + CC*) + lt_prog_compiler_wl_CXX='-Wl,' + lt_prog_compiler_pic_CXX='-KPIC' + lt_prog_compiler_static_CXX='-Bstatic' + ;; + esac + ;; + tandem*) + case $cc_basename in + NCC*) + # NonStop-UX NCC 3.20 + lt_prog_compiler_pic_CXX='-KPIC' + ;; + *) + ;; + esac + ;; + vxworks*) + ;; + *) + lt_prog_compiler_can_build_shared_CXX=no + ;; + esac + fi + +case $host_os in + # For platforms which do not support PIC, -DPIC is meaningless: + *djgpp*) + lt_prog_compiler_pic_CXX= + ;; + *) + lt_prog_compiler_pic_CXX="$lt_prog_compiler_pic_CXX -DPIC" + ;; +esac + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5 +$as_echo_n "checking for $compiler option to produce PIC... " >&6; } +if ${lt_cv_prog_compiler_pic_CXX+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_pic_CXX=$lt_prog_compiler_pic_CXX +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_CXX" >&5 +$as_echo "$lt_cv_prog_compiler_pic_CXX" >&6; } +lt_prog_compiler_pic_CXX=$lt_cv_prog_compiler_pic_CXX + +# +# Check to make sure the PIC flag actually works. +# +if test -n "$lt_prog_compiler_pic_CXX"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works" >&5 +$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works... " >&6; } +if ${lt_cv_prog_compiler_pic_works_CXX+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_pic_works_CXX=no + ac_outfile=conftest.$ac_objext + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + lt_compiler_flag="$lt_prog_compiler_pic_CXX -DPIC" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + # The option is referenced via a variable to avoid confusing sed. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings other than the usual output. + $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then + lt_cv_prog_compiler_pic_works_CXX=yes + fi + fi + $RM conftest* + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works_CXX" >&5 +$as_echo "$lt_cv_prog_compiler_pic_works_CXX" >&6; } + +if test x"$lt_cv_prog_compiler_pic_works_CXX" = xyes; then + case $lt_prog_compiler_pic_CXX in + "" | " "*) ;; + *) lt_prog_compiler_pic_CXX=" $lt_prog_compiler_pic_CXX" ;; + esac +else + lt_prog_compiler_pic_CXX= + lt_prog_compiler_can_build_shared_CXX=no +fi + +fi + + + + + +# +# Check to make sure the static flag actually works. +# +wl=$lt_prog_compiler_wl_CXX eval lt_tmp_static_flag=\"$lt_prog_compiler_static_CXX\" +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5 +$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; } +if ${lt_cv_prog_compiler_static_works_CXX+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_static_works_CXX=no + save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS $lt_tmp_static_flag" + echo "$lt_simple_link_test_code" > conftest.$ac_ext + if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then + # The linker can only warn and ignore the option if not recognized + # So say no if there are warnings + if test -s conftest.err; then + # Append any errors to the config.log. + cat conftest.err 1>&5 + $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if diff conftest.exp conftest.er2 >/dev/null; then + lt_cv_prog_compiler_static_works_CXX=yes + fi + else + lt_cv_prog_compiler_static_works_CXX=yes + fi + fi + $RM -r conftest* + LDFLAGS="$save_LDFLAGS" + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works_CXX" >&5 +$as_echo "$lt_cv_prog_compiler_static_works_CXX" >&6; } + +if test x"$lt_cv_prog_compiler_static_works_CXX" = xyes; then + : +else + lt_prog_compiler_static_CXX= +fi + + + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 +$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } +if ${lt_cv_prog_compiler_c_o_CXX+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_c_o_CXX=no + $RM -r conftest 2>/dev/null + mkdir conftest + cd conftest + mkdir out + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + + lt_compiler_flag="-o out/conftest2.$ac_objext" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) + (eval "$lt_compile" 2>out/conftest.err) + ac_status=$? + cat out/conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s out/conftest2.$ac_objext + then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp + $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 + if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then + lt_cv_prog_compiler_c_o_CXX=yes + fi + fi + chmod u+w . 2>&5 + $RM conftest* + # SGI C++ compiler will create directory out/ii_files/ for + # template instantiation + test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files + $RM out/* && rmdir out + cd .. + $RM -r conftest + $RM conftest* + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o_CXX" >&5 +$as_echo "$lt_cv_prog_compiler_c_o_CXX" >&6; } + + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 +$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } +if ${lt_cv_prog_compiler_c_o_CXX+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_c_o_CXX=no + $RM -r conftest 2>/dev/null + mkdir conftest + cd conftest + mkdir out + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + + lt_compiler_flag="-o out/conftest2.$ac_objext" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) + (eval "$lt_compile" 2>out/conftest.err) + ac_status=$? + cat out/conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s out/conftest2.$ac_objext + then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp + $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 + if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then + lt_cv_prog_compiler_c_o_CXX=yes + fi + fi + chmod u+w . 2>&5 + $RM conftest* + # SGI C++ compiler will create directory out/ii_files/ for + # template instantiation + test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files + $RM out/* && rmdir out + cd .. + $RM -r conftest + $RM conftest* + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o_CXX" >&5 +$as_echo "$lt_cv_prog_compiler_c_o_CXX" >&6; } + + + + +hard_links="nottested" +if test "$lt_cv_prog_compiler_c_o_CXX" = no && test "$need_locks" != no; then + # do not overwrite the value of need_locks provided by the user + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5 +$as_echo_n "checking if we can lock with hard links... " >&6; } + hard_links=yes + $RM conftest* + ln conftest.a conftest.b 2>/dev/null && hard_links=no + touch conftest.a + ln conftest.a conftest.b 2>&5 || hard_links=no + ln conftest.a conftest.b 2>/dev/null && hard_links=no + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5 +$as_echo "$hard_links" >&6; } + if test "$hard_links" = no; then + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 +$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} + need_locks=warn + fi +else + need_locks=no +fi + + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5 +$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } + + export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + exclude_expsyms_CXX='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*' + case $host_os in + aix[4-9]*) + # If we're using GNU nm, then we don't want the "-C" option. + # -C means demangle to AIX nm, but means don't demangle with GNU nm + # Also, AIX nm treats weak defined symbols like other global defined + # symbols, whereas GNU nm marks them as "W". + if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then + export_symbols_cmds_CXX='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' + else + export_symbols_cmds_CXX='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' + fi + ;; + pw32*) + export_symbols_cmds_CXX="$ltdll_cmds" + ;; + cygwin* | mingw* | cegcc*) + case $cc_basename in + cl*) ;; + *) + export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols' + exclude_expsyms_CXX='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname' + ;; + esac + ;; + linux* | k*bsd*-gnu | gnu*) + link_all_deplibs_CXX=no + ;; + *) + export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + ;; + esac + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs_CXX" >&5 +$as_echo "$ld_shlibs_CXX" >&6; } +test "$ld_shlibs_CXX" = no && can_build_shared=no + +with_gnu_ld_CXX=$with_gnu_ld + + + + + + +# +# Do we need to explicitly link libc? +# +case "x$archive_cmds_need_lc_CXX" in +x|xyes) + # Assume -lc should be added + archive_cmds_need_lc_CXX=yes + + if test "$enable_shared" = yes && test "$GCC" = yes; then + case $archive_cmds_CXX in + *'~'*) + # FIXME: we may have to deal with multi-command sequences. + ;; + '$CC '*) + # Test whether the compiler implicitly links with -lc since on some + # systems, -lgcc has to come before -lc. If gcc already passes -lc + # to ld, don't add -lc before -lgcc. + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5 +$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; } +if ${lt_cv_archive_cmds_need_lc_CXX+:} false; then : + $as_echo_n "(cached) " >&6 +else + $RM conftest* + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } 2>conftest.err; then + soname=conftest + lib=conftest + libobjs=conftest.$ac_objext + deplibs= + wl=$lt_prog_compiler_wl_CXX + pic_flag=$lt_prog_compiler_pic_CXX + compiler_flags=-v + linker_flags=-v + verstring= + output_objdir=. + libname=conftest + lt_save_allow_undefined_flag=$allow_undefined_flag_CXX + allow_undefined_flag_CXX= + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds_CXX 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5 + (eval $archive_cmds_CXX 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + then + lt_cv_archive_cmds_need_lc_CXX=no + else + lt_cv_archive_cmds_need_lc_CXX=yes + fi + allow_undefined_flag_CXX=$lt_save_allow_undefined_flag + else + cat conftest.err 1>&5 + fi + $RM conftest* + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_archive_cmds_need_lc_CXX" >&5 +$as_echo "$lt_cv_archive_cmds_need_lc_CXX" >&6; } + archive_cmds_need_lc_CXX=$lt_cv_archive_cmds_need_lc_CXX + ;; + esac + fi + ;; +esac + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5 +$as_echo_n "checking dynamic linker characteristics... " >&6; } + +library_names_spec= +libname_spec='lib$name' +soname_spec= +shrext_cmds=".so" +postinstall_cmds= +postuninstall_cmds= +finish_cmds= +finish_eval= +shlibpath_var= +shlibpath_overrides_runpath=unknown +version_type=none +dynamic_linker="$host_os ld.so" +sys_lib_dlsearch_path_spec="/lib /usr/lib" +need_lib_prefix=unknown +hardcode_into_libs=no + +# when you set need_version to no, make sure it does not cause -set_version +# flags to be left without arguments +need_version=unknown + +case $host_os in +aix3*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' + shlibpath_var=LIBPATH + + # AIX 3 has no versioning support, so we append a major version to the name. + soname_spec='${libname}${release}${shared_ext}$major' + ;; + +aix[4-9]*) + version_type=linux + need_lib_prefix=no + need_version=no + hardcode_into_libs=yes + if test "$host_cpu" = ia64; then + # AIX 5 supports IA64 + library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + else + # With GCC up to 2.95.x, collect2 would create an import file + # for dependence libraries. The import file would start with + # the line `#! .'. This would cause the generated library to + # depend on `.', always an invalid library. This was fixed in + # development snapshots of GCC prior to 3.0. + case $host_os in + aix4 | aix4.[01] | aix4.[01].*) + if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' + echo ' yes ' + echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then + : + else + can_build_shared=no + fi + ;; + esac + # AIX (on Power*) has no versioning support, so currently we can not hardcode correct + # soname into executable. Probably we can add versioning support to + # collect2, so additional links can be useful in future. + if test "$aix_use_runtimelinking" = yes; then + # If using run time linking (on AIX 4.2 or later) use lib.so + # instead of lib.a to let people know that these are not + # typical AIX shared libraries. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + else + # We preserve .a as extension for shared libraries through AIX4.2 + # and later when we are not doing run time linking. + library_names_spec='${libname}${release}.a $libname.a' + soname_spec='${libname}${release}${shared_ext}$major' + fi + shlibpath_var=LIBPATH + fi + ;; + +amigaos*) + case $host_cpu in + powerpc) + # Since July 2007 AmigaOS4 officially supports .so libraries. + # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + ;; + m68k) + library_names_spec='$libname.ixlibrary $libname.a' + # Create ${libname}_ixlibrary.a entries in /sys/libs. + finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' + ;; + esac + ;; + +beos*) + library_names_spec='${libname}${shared_ext}' + dynamic_linker="$host_os ld.so" + shlibpath_var=LIBRARY_PATH + ;; + +bsdi[45]*) + version_type=linux + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" + sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" + # the default ld.so.conf also contains /usr/contrib/lib and + # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow + # libtool to hard-code these into programs + ;; + +cygwin* | mingw* | pw32* | cegcc*) + version_type=windows + shrext_cmds=".dll" + need_version=no + need_lib_prefix=no + + case $GCC,$cc_basename in + yes,*) + # gcc + library_names_spec='$libname.dll.a' + # DLL is installed to $(libdir)/../bin by postinstall_cmds + postinstall_cmds='base_file=`basename \${file}`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog $dir/$dlname \$dldir/$dlname~ + chmod a+x \$dldir/$dlname~ + if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then + eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; + fi' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $RM \$dlpath' + shlibpath_overrides_runpath=yes + + case $host_os in + cygwin*) + # Cygwin DLLs use 'cyg' prefix rather than 'lib' + soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + + ;; + mingw* | cegcc*) + # MinGW DLLs use traditional 'lib' prefix + soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + ;; + pw32*) + # pw32 DLLs use 'pw' prefix rather than 'lib' + library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + ;; + esac + dynamic_linker='Win32 ld.exe' + ;; + + *,cl*) + # Native MSVC + libname_spec='$name' + soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + library_names_spec='${libname}.dll.lib' + + case $build_os in + mingw*) + sys_lib_search_path_spec= + lt_save_ifs=$IFS + IFS=';' + for lt_path in $LIB + do + IFS=$lt_save_ifs + # Let DOS variable expansion print the short 8.3 style file name. + lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"` + sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path" + done + IFS=$lt_save_ifs + # Convert to MSYS style. + sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'` + ;; + cygwin*) + # Convert to unix form, then to dos form, then back to unix form + # but this time dos style (no spaces!) so that the unix form looks + # like /cygdrive/c/PROGRA~1:/cygdr... + sys_lib_search_path_spec=`cygpath --path --unix "$LIB"` + sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null` + sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + ;; + *) + sys_lib_search_path_spec="$LIB" + if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then + # It is most probably a Windows format PATH. + sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` + else + sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + fi + # FIXME: find the short name or the path components, as spaces are + # common. (e.g. "Program Files" -> "PROGRA~1") + ;; + esac + + # DLL is installed to $(libdir)/../bin by postinstall_cmds + postinstall_cmds='base_file=`basename \${file}`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog $dir/$dlname \$dldir/$dlname' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $RM \$dlpath' + shlibpath_overrides_runpath=yes + dynamic_linker='Win32 link.exe' + ;; + + *) + # Assume MSVC wrapper + library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' + dynamic_linker='Win32 ld.exe' + ;; + esac + # FIXME: first we should search . and the directory the executable is in + shlibpath_var=PATH + ;; + +darwin* | rhapsody*) + dynamic_linker="$host_os dyld" + version_type=darwin + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext' + soname_spec='${libname}${release}${major}$shared_ext' + shlibpath_overrides_runpath=yes + shlibpath_var=DYLD_LIBRARY_PATH + shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' + + sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' + ;; + +dgux*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +freebsd1*) + dynamic_linker=no + ;; + +freebsd* | dragonfly*) + # DragonFly does not have aout. When/if they implement a new + # versioning mechanism, adjust this. + if test -x /usr/bin/objformat; then + objformat=`/usr/bin/objformat` + else + case $host_os in + freebsd[123]*) objformat=aout ;; + *) objformat=elf ;; + esac + fi + version_type=freebsd-$objformat + case $version_type in + freebsd-elf*) + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' + need_version=no + need_lib_prefix=no + ;; + freebsd-*) + library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' + need_version=yes + ;; + esac + shlibpath_var=LD_LIBRARY_PATH + case $host_os in + freebsd2*) + shlibpath_overrides_runpath=yes + ;; + freebsd3.[01]* | freebsdelf3.[01]*) + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + freebsd3.[2-9]* | freebsdelf3.[2-9]* | \ + freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1) + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + *) # from 4.6 on, and DragonFly + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + esac + ;; + +gnu*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + +haiku*) + version_type=linux + need_lib_prefix=no + need_version=no + dynamic_linker="$host_os runtime_loader" + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LIBRARY_PATH + shlibpath_overrides_runpath=yes + sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib' + hardcode_into_libs=yes + ;; + +hpux9* | hpux10* | hpux11*) + # Give a soname corresponding to the major version so that dld.sl refuses to + # link against other versions. + version_type=sunos + need_lib_prefix=no + need_version=no + case $host_cpu in + ia64*) + shrext_cmds='.so' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.so" + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + if test "X$HPUX_IA64_MODE" = X32; then + sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" + else + sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" + fi + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + hppa*64*) + shrext_cmds='.sl' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.sl" + shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + *) + shrext_cmds='.sl' + dynamic_linker="$host_os dld.sl" + shlibpath_var=SHLIB_PATH + shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + ;; + esac + # HP-UX runs *really* slowly unless shared libraries are mode 555, ... + postinstall_cmds='chmod 555 $lib' + # or fails outright, so override atomically: + install_override_mode=555 + ;; + +interix[3-9]*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + +irix5* | irix6* | nonstopux*) + case $host_os in + nonstopux*) version_type=nonstopux ;; + *) + if test "$lt_cv_prog_gnu_ld" = yes; then + version_type=linux + else + version_type=irix + fi ;; + esac + need_lib_prefix=no + need_version=no + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' + case $host_os in + irix5* | nonstopux*) + libsuff= shlibsuff= + ;; + *) + case $LD in # libtool.m4 will add one of these switches to LD + *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") + libsuff= shlibsuff= libmagic=32-bit;; + *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") + libsuff=32 shlibsuff=N32 libmagic=N32;; + *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") + libsuff=64 shlibsuff=64 libmagic=64-bit;; + *) libsuff= shlibsuff= libmagic=never-match;; + esac + ;; + esac + shlibpath_var=LD_LIBRARY${shlibsuff}_PATH + shlibpath_overrides_runpath=no + sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" + sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" + hardcode_into_libs=yes + ;; + +# No shared lib support for Linux oldld, aout, or coff. +linux*oldld* | linux*aout* | linux*coff*) + dynamic_linker=no + ;; + +# This must be Linux ELF. +linux* | k*bsd*-gnu | kopensolaris*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + + # Some binutils ld are patched to set DT_RUNPATH + if ${lt_cv_shlibpath_overrides_runpath+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_shlibpath_overrides_runpath=no + save_LDFLAGS=$LDFLAGS + save_libdir=$libdir + eval "libdir=/foo; wl=\"$lt_prog_compiler_wl_CXX\"; \ + LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec_CXX\"" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_cxx_try_link "$LINENO"; then : + if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then : + lt_cv_shlibpath_overrides_runpath=yes +fi +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + LDFLAGS=$save_LDFLAGS + libdir=$save_libdir + +fi + + shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath + + # This implies no fast_install, which is unacceptable. + # Some rework will be needed to allow for fast_install + # before this can be enabled. + hardcode_into_libs=yes + + # Append ld.so.conf contents to the search path + if test -f /etc/ld.so.conf; then + lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '` + sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" + fi + + # We used to test for /lib/ld.so.1 and disable shared libraries on + # powerpc, because MkLinux only supported shared libraries with the + # GNU dynamic linker. Since this was broken with cross compilers, + # most powerpc-linux boxes support dynamic linking these days and + # people can always --disable-shared, the test was removed, and we + # assume the GNU/Linux dynamic linker is in use. + dynamic_linker='GNU/Linux ld.so' + ;; + +netbsdelf*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + dynamic_linker='NetBSD ld.elf_so' + ;; + +netbsd*) + version_type=sunos + need_lib_prefix=no + need_version=no + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + dynamic_linker='NetBSD (a.out) ld.so' + else + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + dynamic_linker='NetBSD ld.elf_so' + fi + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + +newsos6) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + ;; + +*nto* | *qnx*) + version_type=qnx + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + dynamic_linker='ldqnx.so' + ;; + +openbsd*) + version_type=sunos + sys_lib_dlsearch_path_spec="/usr/lib" + need_lib_prefix=no + # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. + case $host_os in + openbsd3.3 | openbsd3.3.*) need_version=yes ;; + *) need_version=no ;; + esac + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + shlibpath_var=LD_LIBRARY_PATH + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + case $host_os in + openbsd2.[89] | openbsd2.[89].*) + shlibpath_overrides_runpath=no + ;; + *) + shlibpath_overrides_runpath=yes + ;; + esac + else + shlibpath_overrides_runpath=yes + fi + ;; + +os2*) + libname_spec='$name' + shrext_cmds=".dll" + need_lib_prefix=no + library_names_spec='$libname${shared_ext} $libname.a' + dynamic_linker='OS/2 ld.exe' + shlibpath_var=LIBPATH + ;; + +osf3* | osf4* | osf5*) + version_type=osf + need_lib_prefix=no + need_version=no + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" + sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" + ;; + +rdos*) + dynamic_linker=no + ;; + +solaris*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + # ldd complains unless libraries are executable + postinstall_cmds='chmod +x $lib' + ;; + +sunos4*) + version_type=sunos + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + if test "$with_gnu_ld" = yes; then + need_lib_prefix=no + fi + need_version=yes + ;; + +sysv4 | sysv4.3*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + case $host_vendor in + sni) + shlibpath_overrides_runpath=no + need_lib_prefix=no + runpath_var=LD_RUN_PATH + ;; + siemens) + need_lib_prefix=no + ;; + motorola) + need_lib_prefix=no + need_version=no + shlibpath_overrides_runpath=no + sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' + ;; + esac + ;; + +sysv4*MP*) + if test -d /usr/nec ;then + version_type=linux + library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' + soname_spec='$libname${shared_ext}.$major' + shlibpath_var=LD_LIBRARY_PATH + fi + ;; + +sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) + version_type=freebsd-elf + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + if test "$with_gnu_ld" = yes; then + sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' + else + sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' + case $host_os in + sco3.2v5*) + sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" + ;; + esac + fi + sys_lib_dlsearch_path_spec='/usr/lib' + ;; + +tpf*) + # TPF is a cross-target only. Preferred cross-host = GNU/Linux. + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + +uts4*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +*) + dynamic_linker=no + ;; +esac +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5 +$as_echo "$dynamic_linker" >&6; } +test "$dynamic_linker" = no && can_build_shared=no + +variables_saved_for_relink="PATH $shlibpath_var $runpath_var" +if test "$GCC" = yes; then + variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" +fi + +if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then + sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" +fi +if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then + sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" +fi + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5 +$as_echo_n "checking how to hardcode library paths into programs... " >&6; } +hardcode_action_CXX= +if test -n "$hardcode_libdir_flag_spec_CXX" || + test -n "$runpath_var_CXX" || + test "X$hardcode_automatic_CXX" = "Xyes" ; then + + # We can hardcode non-existent directories. + if test "$hardcode_direct_CXX" != no && + # If the only mechanism to avoid hardcoding is shlibpath_var, we + # have to relink, otherwise we might link with an installed library + # when we should be linking with a yet-to-be-installed one + ## test "$_LT_TAGVAR(hardcode_shlibpath_var, CXX)" != no && + test "$hardcode_minus_L_CXX" != no; then + # Linking always hardcodes the temporary library directory. + hardcode_action_CXX=relink + else + # We can link without hardcoding, and we can hardcode nonexisting dirs. + hardcode_action_CXX=immediate + fi +else + # We cannot hardcode anything, or else we can only hardcode existing + # directories. + hardcode_action_CXX=unsupported +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action_CXX" >&5 +$as_echo "$hardcode_action_CXX" >&6; } + +if test "$hardcode_action_CXX" = relink || + test "$inherit_rpath_CXX" = yes; then + # Fast installation is not supported + enable_fast_install=no +elif test "$shlibpath_overrides_runpath" = yes || + test "$enable_shared" = no; then + # Fast installation is not necessary + enable_fast_install=needless +fi + + + + + + + + fi # test -n "$compiler" + + CC=$lt_save_CC + CFLAGS=$lt_save_CFLAGS + LDCXX=$LD + LD=$lt_save_LD + GCC=$lt_save_GCC + with_gnu_ld=$lt_save_with_gnu_ld + lt_cv_path_LDCXX=$lt_cv_path_LD + lt_cv_path_LD=$lt_save_path_LD + lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld + lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld +fi # test "$_lt_caught_CXX_error" != yes + +ac_ext=cpp +ac_cpp='$CXXCPP $CPPFLAGS' +ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_cxx_compiler_gnu + + + + + + + + + + + + + + ac_config_commands="$ac_config_commands libtool" + + + + +# Only expand once: + + + +ac_fn_cxx_check_decl "$LINENO" "strerror_r" "ac_cv_have_decl_strerror_r" "$ac_includes_default" +if test "x$ac_cv_have_decl_strerror_r" = xyes; then : + ac_have_decl=1 +else + ac_have_decl=0 +fi + +cat >>confdefs.h <<_ACEOF +#define HAVE_DECL_STRERROR_R $ac_have_decl +_ACEOF + +for ac_func in strerror_r +do : + ac_fn_cxx_check_func "$LINENO" "strerror_r" "ac_cv_func_strerror_r" +if test "x$ac_cv_func_strerror_r" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_STRERROR_R 1 +_ACEOF + +fi +done + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether strerror_r returns char *" >&5 +$as_echo_n "checking whether strerror_r returns char *... " >&6; } +if ${ac_cv_func_strerror_r_char_p+:} false; then : + $as_echo_n "(cached) " >&6 +else + + ac_cv_func_strerror_r_char_p=no + if test $ac_cv_have_decl_strerror_r = yes; then + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ + + char buf[100]; + char x = *strerror_r (0, buf, sizeof buf); + char *p = strerror_r (0, buf, sizeof buf); + return !p || x; + + ; + return 0; +} +_ACEOF +if ac_fn_cxx_try_compile "$LINENO"; then : + ac_cv_func_strerror_r_char_p=yes +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + else + # strerror_r is not declared. Choose between + # systems that have relatively inaccessible declarations for the + # function. BeOS and DEC UNIX 4.0 fall in this category, but the + # former has a strerror_r that returns char*, while the latter + # has a strerror_r that returns `int'. + # This test should segfault on the DEC system. + if test "$cross_compiling" = yes; then : + : +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$ac_includes_default + extern char *strerror_r (); +int +main () +{ +char buf[100]; + char x = *strerror_r (0, buf, sizeof buf); + return ! isalpha (x); + ; + return 0; +} +_ACEOF +if ac_fn_cxx_try_run "$LINENO"; then : + ac_cv_func_strerror_r_char_p=yes +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext +fi + + fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_strerror_r_char_p" >&5 +$as_echo "$ac_cv_func_strerror_r_char_p" >&6; } +if test $ac_cv_func_strerror_r_char_p = yes; then + +$as_echo "#define STRERROR_R_CHAR_P 1" >>confdefs.h + +fi + + if test x$ac_cv_func_strerror_r_char_p = xyes; then + HAVE_GNU_STRERROR_TRUE= + HAVE_GNU_STRERROR_FALSE='#' +else + HAVE_GNU_STRERROR_TRUE='#' + HAVE_GNU_STRERROR_FALSE= +fi + + + + + + + + + + + + + + +# Files: +DX_PROJECT=libzipper + +DX_CONFIG=Doxyfile + +DX_DOCDIR=doc + + +# Environment variables used inside doxygen.cfg: +DX_ENV="$DX_ENV SRCDIR='$srcdir'" + +DX_ENV="$DX_ENV PROJECT='$DX_PROJECT'" + +DX_ENV="$DX_ENV DOCDIR='$DX_DOCDIR'" + +DX_ENV="$DX_ENV VERSION='$PACKAGE_VERSION'" + + +# Doxygen itself: + + + + # Check whether --enable-doxygen-doc was given. +if test "${enable_doxygen_doc+set}" = set; then : + enableval=$enable_doxygen_doc; +case "$enableval" in +#( +y|Y|yes|Yes|YES) + DX_FLAG_doc=1 + + +;; #( +n|N|no|No|NO) + DX_FLAG_doc=0 + +;; #( +*) + as_fn_error $? "invalid value '$enableval' given to doxygen-doc" "$LINENO" 5 +;; +esac + +else + +DX_FLAG_doc=1 + + + +fi + +if test "$DX_FLAG_doc" = 1; then + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}doxygen", so it can be a program name with args. +set dummy ${ac_tool_prefix}doxygen; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_path_DX_DOXYGEN+:} false; then : + $as_echo_n "(cached) " >&6 +else + case $DX_DOXYGEN in + [\\/]* | ?:[\\/]*) + ac_cv_path_DX_DOXYGEN="$DX_DOXYGEN" # Let the user override the test with a path. + ;; + *) + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_path_DX_DOXYGEN="$as_dir/$ac_word$ac_exec_ext" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + + ;; +esac +fi +DX_DOXYGEN=$ac_cv_path_DX_DOXYGEN +if test -n "$DX_DOXYGEN"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DX_DOXYGEN" >&5 +$as_echo "$DX_DOXYGEN" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_path_DX_DOXYGEN"; then + ac_pt_DX_DOXYGEN=$DX_DOXYGEN + # Extract the first word of "doxygen", so it can be a program name with args. +set dummy doxygen; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_path_ac_pt_DX_DOXYGEN+:} false; then : + $as_echo_n "(cached) " >&6 +else + case $ac_pt_DX_DOXYGEN in + [\\/]* | ?:[\\/]*) + ac_cv_path_ac_pt_DX_DOXYGEN="$ac_pt_DX_DOXYGEN" # Let the user override the test with a path. + ;; + *) + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_path_ac_pt_DX_DOXYGEN="$as_dir/$ac_word$ac_exec_ext" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + + ;; +esac +fi +ac_pt_DX_DOXYGEN=$ac_cv_path_ac_pt_DX_DOXYGEN +if test -n "$ac_pt_DX_DOXYGEN"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_pt_DX_DOXYGEN" >&5 +$as_echo "$ac_pt_DX_DOXYGEN" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_pt_DX_DOXYGEN" = x; then + DX_DOXYGEN="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + DX_DOXYGEN=$ac_pt_DX_DOXYGEN + fi +else + DX_DOXYGEN="$ac_cv_path_DX_DOXYGEN" +fi + +if test "$DX_FLAG_doc$DX_DOXYGEN" = 1; then + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: doxygen not found - will not generate any doxygen documentation" >&5 +$as_echo "$as_me: WARNING: doxygen not found - will not generate any doxygen documentation" >&2;} + DX_FLAG_doc=0 + +fi + + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}perl", so it can be a program name with args. +set dummy ${ac_tool_prefix}perl; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_path_DX_PERL+:} false; then : + $as_echo_n "(cached) " >&6 +else + case $DX_PERL in + [\\/]* | ?:[\\/]*) + ac_cv_path_DX_PERL="$DX_PERL" # Let the user override the test with a path. + ;; + *) + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_path_DX_PERL="$as_dir/$ac_word$ac_exec_ext" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + + ;; +esac +fi +DX_PERL=$ac_cv_path_DX_PERL +if test -n "$DX_PERL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DX_PERL" >&5 +$as_echo "$DX_PERL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_path_DX_PERL"; then + ac_pt_DX_PERL=$DX_PERL + # Extract the first word of "perl", so it can be a program name with args. +set dummy perl; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_path_ac_pt_DX_PERL+:} false; then : + $as_echo_n "(cached) " >&6 +else + case $ac_pt_DX_PERL in + [\\/]* | ?:[\\/]*) + ac_cv_path_ac_pt_DX_PERL="$ac_pt_DX_PERL" # Let the user override the test with a path. + ;; + *) + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_path_ac_pt_DX_PERL="$as_dir/$ac_word$ac_exec_ext" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + + ;; +esac +fi +ac_pt_DX_PERL=$ac_cv_path_ac_pt_DX_PERL +if test -n "$ac_pt_DX_PERL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_pt_DX_PERL" >&5 +$as_echo "$ac_pt_DX_PERL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_pt_DX_PERL" = x; then + DX_PERL="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + DX_PERL=$ac_pt_DX_PERL + fi +else + DX_PERL="$ac_cv_path_DX_PERL" +fi + +if test "$DX_FLAG_doc$DX_PERL" = 1; then + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: perl not found - will not generate any doxygen documentation" >&5 +$as_echo "$as_me: WARNING: perl not found - will not generate any doxygen documentation" >&2;} + DX_FLAG_doc=0 + +fi + + : +fi +if test "$DX_FLAG_doc" = 1; then + if :; then + DX_COND_doc_TRUE= + DX_COND_doc_FALSE='#' +else + DX_COND_doc_TRUE='#' + DX_COND_doc_FALSE= +fi + + DX_ENV="$DX_ENV PERL_PATH='$DX_PERL'" + + : +else + if false; then + DX_COND_doc_TRUE= + DX_COND_doc_FALSE='#' +else + DX_COND_doc_TRUE='#' + DX_COND_doc_FALSE= +fi + + + : +fi + + +# Dot for graphics: + + + + # Check whether --enable-doxygen-dot was given. +if test "${enable_doxygen_dot+set}" = set; then : + enableval=$enable_doxygen_dot; +case "$enableval" in +#( +y|Y|yes|Yes|YES) + DX_FLAG_dot=1 + + +test "$DX_FLAG_doc" = "1" \ +|| as_fn_error $? "doxygen-dot requires doxygen-dot" "$LINENO" 5 + +;; #( +n|N|no|No|NO) + DX_FLAG_dot=0 + +;; #( +*) + as_fn_error $? "invalid value '$enableval' given to doxygen-dot" "$LINENO" 5 +;; +esac + +else + +DX_FLAG_dot=0 + + +test "$DX_FLAG_doc" = "1" || DX_FLAG_dot=0 + + + +fi + +if test "$DX_FLAG_dot" = 1; then + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}dot", so it can be a program name with args. +set dummy ${ac_tool_prefix}dot; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_path_DX_DOT+:} false; then : + $as_echo_n "(cached) " >&6 +else + case $DX_DOT in + [\\/]* | ?:[\\/]*) + ac_cv_path_DX_DOT="$DX_DOT" # Let the user override the test with a path. + ;; + *) + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_path_DX_DOT="$as_dir/$ac_word$ac_exec_ext" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + + ;; +esac +fi +DX_DOT=$ac_cv_path_DX_DOT +if test -n "$DX_DOT"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DX_DOT" >&5 +$as_echo "$DX_DOT" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_path_DX_DOT"; then + ac_pt_DX_DOT=$DX_DOT + # Extract the first word of "dot", so it can be a program name with args. +set dummy dot; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_path_ac_pt_DX_DOT+:} false; then : + $as_echo_n "(cached) " >&6 +else + case $ac_pt_DX_DOT in + [\\/]* | ?:[\\/]*) + ac_cv_path_ac_pt_DX_DOT="$ac_pt_DX_DOT" # Let the user override the test with a path. + ;; + *) + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_path_ac_pt_DX_DOT="$as_dir/$ac_word$ac_exec_ext" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + + ;; +esac +fi +ac_pt_DX_DOT=$ac_cv_path_ac_pt_DX_DOT +if test -n "$ac_pt_DX_DOT"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_pt_DX_DOT" >&5 +$as_echo "$ac_pt_DX_DOT" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_pt_DX_DOT" = x; then + DX_DOT="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + DX_DOT=$ac_pt_DX_DOT + fi +else + DX_DOT="$ac_cv_path_DX_DOT" +fi + +if test "$DX_FLAG_dot$DX_DOT" = 1; then + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: dot not found - will not generate graphics for doxygen documentation" >&5 +$as_echo "$as_me: WARNING: dot not found - will not generate graphics for doxygen documentation" >&2;} + DX_FLAG_dot=0 + +fi + + : +fi +if test "$DX_FLAG_dot" = 1; then + if :; then + DX_COND_dot_TRUE= + DX_COND_dot_FALSE='#' +else + DX_COND_dot_TRUE='#' + DX_COND_dot_FALSE= +fi + + DX_ENV="$DX_ENV HAVE_DOT='YES'" + + DX_ENV="$DX_ENV DOT_PATH='`expr ".$DX_DOT" : '\(\.\)[^/]*$' \| "x$DX_DOT" : 'x\(.*\)/[^/]*$'`'" + + : +else + if false; then + DX_COND_dot_TRUE= + DX_COND_dot_FALSE='#' +else + DX_COND_dot_TRUE='#' + DX_COND_dot_FALSE= +fi + + DX_ENV="$DX_ENV HAVE_DOT='NO'" + + : +fi + + +# Man pages generation: + + + + # Check whether --enable-doxygen-man was given. +if test "${enable_doxygen_man+set}" = set; then : + enableval=$enable_doxygen_man; +case "$enableval" in +#( +y|Y|yes|Yes|YES) + DX_FLAG_man=1 + + +test "$DX_FLAG_doc" = "1" \ +|| as_fn_error $? "doxygen-man requires doxygen-man" "$LINENO" 5 + +;; #( +n|N|no|No|NO) + DX_FLAG_man=0 + +;; #( +*) + as_fn_error $? "invalid value '$enableval' given to doxygen-man" "$LINENO" 5 +;; +esac + +else + +DX_FLAG_man=0 + + +test "$DX_FLAG_doc" = "1" || DX_FLAG_man=0 + + + +fi + +if test "$DX_FLAG_man" = 1; then + + : +fi +if test "$DX_FLAG_man" = 1; then + if :; then + DX_COND_man_TRUE= + DX_COND_man_FALSE='#' +else + DX_COND_man_TRUE='#' + DX_COND_man_FALSE= +fi + + DX_ENV="$DX_ENV GENERATE_MAN='YES'" + + : +else + if false; then + DX_COND_man_TRUE= + DX_COND_man_FALSE='#' +else + DX_COND_man_TRUE='#' + DX_COND_man_FALSE= +fi + + DX_ENV="$DX_ENV GENERATE_MAN='NO'" + + : +fi + + +# RTF file generation: + + + + # Check whether --enable-doxygen-rtf was given. +if test "${enable_doxygen_rtf+set}" = set; then : + enableval=$enable_doxygen_rtf; +case "$enableval" in +#( +y|Y|yes|Yes|YES) + DX_FLAG_rtf=1 + + +test "$DX_FLAG_doc" = "1" \ +|| as_fn_error $? "doxygen-rtf requires doxygen-rtf" "$LINENO" 5 + +;; #( +n|N|no|No|NO) + DX_FLAG_rtf=0 + +;; #( +*) + as_fn_error $? "invalid value '$enableval' given to doxygen-rtf" "$LINENO" 5 +;; +esac + +else + +DX_FLAG_rtf=0 + + +test "$DX_FLAG_doc" = "1" || DX_FLAG_rtf=0 + + + +fi + +if test "$DX_FLAG_rtf" = 1; then + + : +fi +if test "$DX_FLAG_rtf" = 1; then + if :; then + DX_COND_rtf_TRUE= + DX_COND_rtf_FALSE='#' +else + DX_COND_rtf_TRUE='#' + DX_COND_rtf_FALSE= +fi + + DX_ENV="$DX_ENV GENERATE_RTF='YES'" + + : +else + if false; then + DX_COND_rtf_TRUE= + DX_COND_rtf_FALSE='#' +else + DX_COND_rtf_TRUE='#' + DX_COND_rtf_FALSE= +fi + + DX_ENV="$DX_ENV GENERATE_RTF='NO'" + + : +fi + + +# XML file generation: + + + + # Check whether --enable-doxygen-xml was given. +if test "${enable_doxygen_xml+set}" = set; then : + enableval=$enable_doxygen_xml; +case "$enableval" in +#( +y|Y|yes|Yes|YES) + DX_FLAG_xml=1 + + +test "$DX_FLAG_doc" = "1" \ +|| as_fn_error $? "doxygen-xml requires doxygen-xml" "$LINENO" 5 + +;; #( +n|N|no|No|NO) + DX_FLAG_xml=0 + +;; #( +*) + as_fn_error $? "invalid value '$enableval' given to doxygen-xml" "$LINENO" 5 +;; +esac + +else + +DX_FLAG_xml=0 + + +test "$DX_FLAG_doc" = "1" || DX_FLAG_xml=0 + + + +fi + +if test "$DX_FLAG_xml" = 1; then + + : +fi +if test "$DX_FLAG_xml" = 1; then + if :; then + DX_COND_xml_TRUE= + DX_COND_xml_FALSE='#' +else + DX_COND_xml_TRUE='#' + DX_COND_xml_FALSE= +fi + + DX_ENV="$DX_ENV GENERATE_XML='YES'" + + : +else + if false; then + DX_COND_xml_TRUE= + DX_COND_xml_FALSE='#' +else + DX_COND_xml_TRUE='#' + DX_COND_xml_FALSE= +fi + + DX_ENV="$DX_ENV GENERATE_XML='NO'" + + : +fi + + +# (Compressed) HTML help generation: + + + + # Check whether --enable-doxygen-chm was given. +if test "${enable_doxygen_chm+set}" = set; then : + enableval=$enable_doxygen_chm; +case "$enableval" in +#( +y|Y|yes|Yes|YES) + DX_FLAG_chm=1 + + +test "$DX_FLAG_doc" = "1" \ +|| as_fn_error $? "doxygen-chm requires doxygen-chm" "$LINENO" 5 + +;; #( +n|N|no|No|NO) + DX_FLAG_chm=0 + +;; #( +*) + as_fn_error $? "invalid value '$enableval' given to doxygen-chm" "$LINENO" 5 +;; +esac + +else + +DX_FLAG_chm=0 + + +test "$DX_FLAG_doc" = "1" || DX_FLAG_chm=0 + + + +fi + +if test "$DX_FLAG_chm" = 1; then + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}hhc", so it can be a program name with args. +set dummy ${ac_tool_prefix}hhc; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_path_DX_HHC+:} false; then : + $as_echo_n "(cached) " >&6 +else + case $DX_HHC in + [\\/]* | ?:[\\/]*) + ac_cv_path_DX_HHC="$DX_HHC" # Let the user override the test with a path. + ;; + *) + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_path_DX_HHC="$as_dir/$ac_word$ac_exec_ext" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + + ;; +esac +fi +DX_HHC=$ac_cv_path_DX_HHC +if test -n "$DX_HHC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DX_HHC" >&5 +$as_echo "$DX_HHC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_path_DX_HHC"; then + ac_pt_DX_HHC=$DX_HHC + # Extract the first word of "hhc", so it can be a program name with args. +set dummy hhc; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_path_ac_pt_DX_HHC+:} false; then : + $as_echo_n "(cached) " >&6 +else + case $ac_pt_DX_HHC in + [\\/]* | ?:[\\/]*) + ac_cv_path_ac_pt_DX_HHC="$ac_pt_DX_HHC" # Let the user override the test with a path. + ;; + *) + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_path_ac_pt_DX_HHC="$as_dir/$ac_word$ac_exec_ext" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + + ;; +esac +fi +ac_pt_DX_HHC=$ac_cv_path_ac_pt_DX_HHC +if test -n "$ac_pt_DX_HHC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_pt_DX_HHC" >&5 +$as_echo "$ac_pt_DX_HHC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_pt_DX_HHC" = x; then + DX_HHC="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + DX_HHC=$ac_pt_DX_HHC + fi +else + DX_HHC="$ac_cv_path_DX_HHC" +fi + +if test "$DX_FLAG_chm$DX_HHC" = 1; then + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: hhc not found - will not generate doxygen compressed HTML help documentation" >&5 +$as_echo "$as_me: WARNING: hhc not found - will not generate doxygen compressed HTML help documentation" >&2;} + DX_FLAG_chm=0 + +fi + + : +fi +if test "$DX_FLAG_chm" = 1; then + if :; then + DX_COND_chm_TRUE= + DX_COND_chm_FALSE='#' +else + DX_COND_chm_TRUE='#' + DX_COND_chm_FALSE= +fi + + DX_ENV="$DX_ENV HHC_PATH='$DX_HHC'" + + DX_ENV="$DX_ENV GENERATE_HTML='YES'" + + DX_ENV="$DX_ENV GENERATE_HTMLHELP='YES'" + + : +else + if false; then + DX_COND_chm_TRUE= + DX_COND_chm_FALSE='#' +else + DX_COND_chm_TRUE='#' + DX_COND_chm_FALSE= +fi + + DX_ENV="$DX_ENV GENERATE_HTMLHELP='NO'" + + : +fi + + +# Seperate CHI file generation. + + + + # Check whether --enable-doxygen-chi was given. +if test "${enable_doxygen_chi+set}" = set; then : + enableval=$enable_doxygen_chi; +case "$enableval" in +#( +y|Y|yes|Yes|YES) + DX_FLAG_chi=1 + + +test "$DX_FLAG_chm" = "1" \ +|| as_fn_error $? "doxygen-chi requires doxygen-chi" "$LINENO" 5 + +;; #( +n|N|no|No|NO) + DX_FLAG_chi=0 + +;; #( +*) + as_fn_error $? "invalid value '$enableval' given to doxygen-chi" "$LINENO" 5 +;; +esac + +else + +DX_FLAG_chi=0 + + +test "$DX_FLAG_chm" = "1" || DX_FLAG_chi=0 + + + +fi + +if test "$DX_FLAG_chi" = 1; then + + : +fi +if test "$DX_FLAG_chi" = 1; then + if :; then + DX_COND_chi_TRUE= + DX_COND_chi_FALSE='#' +else + DX_COND_chi_TRUE='#' + DX_COND_chi_FALSE= +fi + + DX_ENV="$DX_ENV GENERATE_CHI='YES'" + + : +else + if false; then + DX_COND_chi_TRUE= + DX_COND_chi_FALSE='#' +else + DX_COND_chi_TRUE='#' + DX_COND_chi_FALSE= +fi + + DX_ENV="$DX_ENV GENERATE_CHI='NO'" + + : +fi + + +# Plain HTML pages generation: + + + + # Check whether --enable-doxygen-html was given. +if test "${enable_doxygen_html+set}" = set; then : + enableval=$enable_doxygen_html; +case "$enableval" in +#( +y|Y|yes|Yes|YES) + DX_FLAG_html=1 + + +test "$DX_FLAG_doc" = "1" \ +|| as_fn_error $? "doxygen-html requires doxygen-html" "$LINENO" 5 + +test "$DX_FLAG_chm" = "0" \ +|| as_fn_error $? "doxygen-html contradicts doxygen-html" "$LINENO" 5 + +;; #( +n|N|no|No|NO) + DX_FLAG_html=0 + +;; #( +*) + as_fn_error $? "invalid value '$enableval' given to doxygen-html" "$LINENO" 5 +;; +esac + +else + +DX_FLAG_html=1 + + +test "$DX_FLAG_doc" = "1" || DX_FLAG_html=0 + + +test "$DX_FLAG_chm" = "0" || DX_FLAG_html=0 + + + +fi + +if test "$DX_FLAG_html" = 1; then + + : +fi +if test "$DX_FLAG_html" = 1; then + if :; then + DX_COND_html_TRUE= + DX_COND_html_FALSE='#' +else + DX_COND_html_TRUE='#' + DX_COND_html_FALSE= +fi + + DX_ENV="$DX_ENV GENERATE_HTML='YES'" + + : +else + if false; then + DX_COND_html_TRUE= + DX_COND_html_FALSE='#' +else + DX_COND_html_TRUE='#' + DX_COND_html_FALSE= +fi + + test "$DX_FLAG_chm" = 1 || DX_ENV="$DX_ENV GENERATE_HTML='NO'" + + : +fi + + +# PostScript file generation: + + + + # Check whether --enable-doxygen-ps was given. +if test "${enable_doxygen_ps+set}" = set; then : + enableval=$enable_doxygen_ps; +case "$enableval" in +#( +y|Y|yes|Yes|YES) + DX_FLAG_ps=1 + + +test "$DX_FLAG_doc" = "1" \ +|| as_fn_error $? "doxygen-ps requires doxygen-ps" "$LINENO" 5 + +;; #( +n|N|no|No|NO) + DX_FLAG_ps=0 + +;; #( +*) + as_fn_error $? "invalid value '$enableval' given to doxygen-ps" "$LINENO" 5 +;; +esac + +else + +DX_FLAG_ps=0 + + +test "$DX_FLAG_doc" = "1" || DX_FLAG_ps=0 + + + +fi + +if test "$DX_FLAG_ps" = 1; then + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}latex", so it can be a program name with args. +set dummy ${ac_tool_prefix}latex; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_path_DX_LATEX+:} false; then : + $as_echo_n "(cached) " >&6 +else + case $DX_LATEX in + [\\/]* | ?:[\\/]*) + ac_cv_path_DX_LATEX="$DX_LATEX" # Let the user override the test with a path. + ;; + *) + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_path_DX_LATEX="$as_dir/$ac_word$ac_exec_ext" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + + ;; +esac +fi +DX_LATEX=$ac_cv_path_DX_LATEX +if test -n "$DX_LATEX"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DX_LATEX" >&5 +$as_echo "$DX_LATEX" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_path_DX_LATEX"; then + ac_pt_DX_LATEX=$DX_LATEX + # Extract the first word of "latex", so it can be a program name with args. +set dummy latex; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_path_ac_pt_DX_LATEX+:} false; then : + $as_echo_n "(cached) " >&6 +else + case $ac_pt_DX_LATEX in + [\\/]* | ?:[\\/]*) + ac_cv_path_ac_pt_DX_LATEX="$ac_pt_DX_LATEX" # Let the user override the test with a path. + ;; + *) + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_path_ac_pt_DX_LATEX="$as_dir/$ac_word$ac_exec_ext" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + + ;; +esac +fi +ac_pt_DX_LATEX=$ac_cv_path_ac_pt_DX_LATEX +if test -n "$ac_pt_DX_LATEX"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_pt_DX_LATEX" >&5 +$as_echo "$ac_pt_DX_LATEX" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_pt_DX_LATEX" = x; then + DX_LATEX="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + DX_LATEX=$ac_pt_DX_LATEX + fi +else + DX_LATEX="$ac_cv_path_DX_LATEX" +fi + +if test "$DX_FLAG_ps$DX_LATEX" = 1; then + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: latex not found - will not generate doxygen PostScript documentation" >&5 +$as_echo "$as_me: WARNING: latex not found - will not generate doxygen PostScript documentation" >&2;} + DX_FLAG_ps=0 + +fi + + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}makeindex", so it can be a program name with args. +set dummy ${ac_tool_prefix}makeindex; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_path_DX_MAKEINDEX+:} false; then : + $as_echo_n "(cached) " >&6 +else + case $DX_MAKEINDEX in + [\\/]* | ?:[\\/]*) + ac_cv_path_DX_MAKEINDEX="$DX_MAKEINDEX" # Let the user override the test with a path. + ;; + *) + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_path_DX_MAKEINDEX="$as_dir/$ac_word$ac_exec_ext" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + + ;; +esac +fi +DX_MAKEINDEX=$ac_cv_path_DX_MAKEINDEX +if test -n "$DX_MAKEINDEX"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DX_MAKEINDEX" >&5 +$as_echo "$DX_MAKEINDEX" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_path_DX_MAKEINDEX"; then + ac_pt_DX_MAKEINDEX=$DX_MAKEINDEX + # Extract the first word of "makeindex", so it can be a program name with args. +set dummy makeindex; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_path_ac_pt_DX_MAKEINDEX+:} false; then : + $as_echo_n "(cached) " >&6 +else + case $ac_pt_DX_MAKEINDEX in + [\\/]* | ?:[\\/]*) + ac_cv_path_ac_pt_DX_MAKEINDEX="$ac_pt_DX_MAKEINDEX" # Let the user override the test with a path. + ;; + *) + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_path_ac_pt_DX_MAKEINDEX="$as_dir/$ac_word$ac_exec_ext" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + + ;; +esac +fi +ac_pt_DX_MAKEINDEX=$ac_cv_path_ac_pt_DX_MAKEINDEX +if test -n "$ac_pt_DX_MAKEINDEX"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_pt_DX_MAKEINDEX" >&5 +$as_echo "$ac_pt_DX_MAKEINDEX" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_pt_DX_MAKEINDEX" = x; then + DX_MAKEINDEX="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + DX_MAKEINDEX=$ac_pt_DX_MAKEINDEX + fi +else + DX_MAKEINDEX="$ac_cv_path_DX_MAKEINDEX" +fi + +if test "$DX_FLAG_ps$DX_MAKEINDEX" = 1; then + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: makeindex not found - will not generate doxygen PostScript documentation" >&5 +$as_echo "$as_me: WARNING: makeindex not found - will not generate doxygen PostScript documentation" >&2;} + DX_FLAG_ps=0 + +fi + + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}dvips", so it can be a program name with args. +set dummy ${ac_tool_prefix}dvips; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_path_DX_DVIPS+:} false; then : + $as_echo_n "(cached) " >&6 +else + case $DX_DVIPS in + [\\/]* | ?:[\\/]*) + ac_cv_path_DX_DVIPS="$DX_DVIPS" # Let the user override the test with a path. + ;; + *) + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_path_DX_DVIPS="$as_dir/$ac_word$ac_exec_ext" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + + ;; +esac +fi +DX_DVIPS=$ac_cv_path_DX_DVIPS +if test -n "$DX_DVIPS"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DX_DVIPS" >&5 +$as_echo "$DX_DVIPS" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_path_DX_DVIPS"; then + ac_pt_DX_DVIPS=$DX_DVIPS + # Extract the first word of "dvips", so it can be a program name with args. +set dummy dvips; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_path_ac_pt_DX_DVIPS+:} false; then : + $as_echo_n "(cached) " >&6 +else + case $ac_pt_DX_DVIPS in + [\\/]* | ?:[\\/]*) + ac_cv_path_ac_pt_DX_DVIPS="$ac_pt_DX_DVIPS" # Let the user override the test with a path. + ;; + *) + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_path_ac_pt_DX_DVIPS="$as_dir/$ac_word$ac_exec_ext" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + + ;; +esac +fi +ac_pt_DX_DVIPS=$ac_cv_path_ac_pt_DX_DVIPS +if test -n "$ac_pt_DX_DVIPS"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_pt_DX_DVIPS" >&5 +$as_echo "$ac_pt_DX_DVIPS" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_pt_DX_DVIPS" = x; then + DX_DVIPS="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + DX_DVIPS=$ac_pt_DX_DVIPS + fi +else + DX_DVIPS="$ac_cv_path_DX_DVIPS" +fi + +if test "$DX_FLAG_ps$DX_DVIPS" = 1; then + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: dvips not found - will not generate doxygen PostScript documentation" >&5 +$as_echo "$as_me: WARNING: dvips not found - will not generate doxygen PostScript documentation" >&2;} + DX_FLAG_ps=0 + +fi + + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}egrep", so it can be a program name with args. +set dummy ${ac_tool_prefix}egrep; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_path_DX_EGREP+:} false; then : + $as_echo_n "(cached) " >&6 +else + case $DX_EGREP in + [\\/]* | ?:[\\/]*) + ac_cv_path_DX_EGREP="$DX_EGREP" # Let the user override the test with a path. + ;; + *) + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_path_DX_EGREP="$as_dir/$ac_word$ac_exec_ext" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + + ;; +esac +fi +DX_EGREP=$ac_cv_path_DX_EGREP +if test -n "$DX_EGREP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DX_EGREP" >&5 +$as_echo "$DX_EGREP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_path_DX_EGREP"; then + ac_pt_DX_EGREP=$DX_EGREP + # Extract the first word of "egrep", so it can be a program name with args. +set dummy egrep; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_path_ac_pt_DX_EGREP+:} false; then : + $as_echo_n "(cached) " >&6 +else + case $ac_pt_DX_EGREP in + [\\/]* | ?:[\\/]*) + ac_cv_path_ac_pt_DX_EGREP="$ac_pt_DX_EGREP" # Let the user override the test with a path. + ;; + *) + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_path_ac_pt_DX_EGREP="$as_dir/$ac_word$ac_exec_ext" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + + ;; +esac +fi +ac_pt_DX_EGREP=$ac_cv_path_ac_pt_DX_EGREP +if test -n "$ac_pt_DX_EGREP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_pt_DX_EGREP" >&5 +$as_echo "$ac_pt_DX_EGREP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_pt_DX_EGREP" = x; then + DX_EGREP="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + DX_EGREP=$ac_pt_DX_EGREP + fi +else + DX_EGREP="$ac_cv_path_DX_EGREP" +fi + +if test "$DX_FLAG_ps$DX_EGREP" = 1; then + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: egrep not found - will not generate doxygen PostScript documentation" >&5 +$as_echo "$as_me: WARNING: egrep not found - will not generate doxygen PostScript documentation" >&2;} + DX_FLAG_ps=0 + +fi + + : +fi +if test "$DX_FLAG_ps" = 1; then + if :; then + DX_COND_ps_TRUE= + DX_COND_ps_FALSE='#' +else + DX_COND_ps_TRUE='#' + DX_COND_ps_FALSE= +fi + + + : +else + if false; then + DX_COND_ps_TRUE= + DX_COND_ps_FALSE='#' +else + DX_COND_ps_TRUE='#' + DX_COND_ps_FALSE= +fi + + + : +fi + + +# PDF file generation: + + + + # Check whether --enable-doxygen-pdf was given. +if test "${enable_doxygen_pdf+set}" = set; then : + enableval=$enable_doxygen_pdf; +case "$enableval" in +#( +y|Y|yes|Yes|YES) + DX_FLAG_pdf=1 + + +test "$DX_FLAG_doc" = "1" \ +|| as_fn_error $? "doxygen-pdf requires doxygen-pdf" "$LINENO" 5 + +;; #( +n|N|no|No|NO) + DX_FLAG_pdf=0 + +;; #( +*) + as_fn_error $? "invalid value '$enableval' given to doxygen-pdf" "$LINENO" 5 +;; +esac + +else + +DX_FLAG_pdf=0 + + +test "$DX_FLAG_doc" = "1" || DX_FLAG_pdf=0 + + + +fi + +if test "$DX_FLAG_pdf" = 1; then + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}pdflatex", so it can be a program name with args. +set dummy ${ac_tool_prefix}pdflatex; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_path_DX_PDFLATEX+:} false; then : + $as_echo_n "(cached) " >&6 +else + case $DX_PDFLATEX in + [\\/]* | ?:[\\/]*) + ac_cv_path_DX_PDFLATEX="$DX_PDFLATEX" # Let the user override the test with a path. + ;; + *) + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_path_DX_PDFLATEX="$as_dir/$ac_word$ac_exec_ext" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + + ;; +esac +fi +DX_PDFLATEX=$ac_cv_path_DX_PDFLATEX +if test -n "$DX_PDFLATEX"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DX_PDFLATEX" >&5 +$as_echo "$DX_PDFLATEX" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_path_DX_PDFLATEX"; then + ac_pt_DX_PDFLATEX=$DX_PDFLATEX + # Extract the first word of "pdflatex", so it can be a program name with args. +set dummy pdflatex; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_path_ac_pt_DX_PDFLATEX+:} false; then : + $as_echo_n "(cached) " >&6 +else + case $ac_pt_DX_PDFLATEX in + [\\/]* | ?:[\\/]*) + ac_cv_path_ac_pt_DX_PDFLATEX="$ac_pt_DX_PDFLATEX" # Let the user override the test with a path. + ;; + *) + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_path_ac_pt_DX_PDFLATEX="$as_dir/$ac_word$ac_exec_ext" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + + ;; +esac +fi +ac_pt_DX_PDFLATEX=$ac_cv_path_ac_pt_DX_PDFLATEX +if test -n "$ac_pt_DX_PDFLATEX"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_pt_DX_PDFLATEX" >&5 +$as_echo "$ac_pt_DX_PDFLATEX" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_pt_DX_PDFLATEX" = x; then + DX_PDFLATEX="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + DX_PDFLATEX=$ac_pt_DX_PDFLATEX + fi +else + DX_PDFLATEX="$ac_cv_path_DX_PDFLATEX" +fi + +if test "$DX_FLAG_pdf$DX_PDFLATEX" = 1; then + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: pdflatex not found - will not generate doxygen PDF documentation" >&5 +$as_echo "$as_me: WARNING: pdflatex not found - will not generate doxygen PDF documentation" >&2;} + DX_FLAG_pdf=0 + +fi + + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}makeindex", so it can be a program name with args. +set dummy ${ac_tool_prefix}makeindex; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_path_DX_MAKEINDEX+:} false; then : + $as_echo_n "(cached) " >&6 +else + case $DX_MAKEINDEX in + [\\/]* | ?:[\\/]*) + ac_cv_path_DX_MAKEINDEX="$DX_MAKEINDEX" # Let the user override the test with a path. + ;; + *) + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_path_DX_MAKEINDEX="$as_dir/$ac_word$ac_exec_ext" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + + ;; +esac +fi +DX_MAKEINDEX=$ac_cv_path_DX_MAKEINDEX +if test -n "$DX_MAKEINDEX"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DX_MAKEINDEX" >&5 +$as_echo "$DX_MAKEINDEX" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_path_DX_MAKEINDEX"; then + ac_pt_DX_MAKEINDEX=$DX_MAKEINDEX + # Extract the first word of "makeindex", so it can be a program name with args. +set dummy makeindex; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_path_ac_pt_DX_MAKEINDEX+:} false; then : + $as_echo_n "(cached) " >&6 +else + case $ac_pt_DX_MAKEINDEX in + [\\/]* | ?:[\\/]*) + ac_cv_path_ac_pt_DX_MAKEINDEX="$ac_pt_DX_MAKEINDEX" # Let the user override the test with a path. + ;; + *) + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_path_ac_pt_DX_MAKEINDEX="$as_dir/$ac_word$ac_exec_ext" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + + ;; +esac +fi +ac_pt_DX_MAKEINDEX=$ac_cv_path_ac_pt_DX_MAKEINDEX +if test -n "$ac_pt_DX_MAKEINDEX"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_pt_DX_MAKEINDEX" >&5 +$as_echo "$ac_pt_DX_MAKEINDEX" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_pt_DX_MAKEINDEX" = x; then + DX_MAKEINDEX="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + DX_MAKEINDEX=$ac_pt_DX_MAKEINDEX + fi +else + DX_MAKEINDEX="$ac_cv_path_DX_MAKEINDEX" +fi + +if test "$DX_FLAG_pdf$DX_MAKEINDEX" = 1; then + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: makeindex not found - will not generate doxygen PDF documentation" >&5 +$as_echo "$as_me: WARNING: makeindex not found - will not generate doxygen PDF documentation" >&2;} + DX_FLAG_pdf=0 + +fi + + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}egrep", so it can be a program name with args. +set dummy ${ac_tool_prefix}egrep; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_path_DX_EGREP+:} false; then : + $as_echo_n "(cached) " >&6 +else + case $DX_EGREP in + [\\/]* | ?:[\\/]*) + ac_cv_path_DX_EGREP="$DX_EGREP" # Let the user override the test with a path. + ;; + *) + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_path_DX_EGREP="$as_dir/$ac_word$ac_exec_ext" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + + ;; +esac +fi +DX_EGREP=$ac_cv_path_DX_EGREP +if test -n "$DX_EGREP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DX_EGREP" >&5 +$as_echo "$DX_EGREP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_path_DX_EGREP"; then + ac_pt_DX_EGREP=$DX_EGREP + # Extract the first word of "egrep", so it can be a program name with args. +set dummy egrep; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_path_ac_pt_DX_EGREP+:} false; then : + $as_echo_n "(cached) " >&6 +else + case $ac_pt_DX_EGREP in + [\\/]* | ?:[\\/]*) + ac_cv_path_ac_pt_DX_EGREP="$ac_pt_DX_EGREP" # Let the user override the test with a path. + ;; + *) + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_path_ac_pt_DX_EGREP="$as_dir/$ac_word$ac_exec_ext" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + + ;; +esac +fi +ac_pt_DX_EGREP=$ac_cv_path_ac_pt_DX_EGREP +if test -n "$ac_pt_DX_EGREP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_pt_DX_EGREP" >&5 +$as_echo "$ac_pt_DX_EGREP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_pt_DX_EGREP" = x; then + DX_EGREP="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + DX_EGREP=$ac_pt_DX_EGREP + fi +else + DX_EGREP="$ac_cv_path_DX_EGREP" +fi + +if test "$DX_FLAG_pdf$DX_EGREP" = 1; then + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: egrep not found - will not generate doxygen PDF documentation" >&5 +$as_echo "$as_me: WARNING: egrep not found - will not generate doxygen PDF documentation" >&2;} + DX_FLAG_pdf=0 + +fi + + : +fi +if test "$DX_FLAG_pdf" = 1; then + if :; then + DX_COND_pdf_TRUE= + DX_COND_pdf_FALSE='#' +else + DX_COND_pdf_TRUE='#' + DX_COND_pdf_FALSE= +fi + + + : +else + if false; then + DX_COND_pdf_TRUE= + DX_COND_pdf_FALSE='#' +else + DX_COND_pdf_TRUE='#' + DX_COND_pdf_FALSE= +fi + + + : +fi + + +# LaTeX generation for PS and/or PDF: +if test "$DX_FLAG_ps" = 1 || test "$DX_FLAG_pdf" = 1; then + if :; then + DX_COND_latex_TRUE= + DX_COND_latex_FALSE='#' +else + DX_COND_latex_TRUE='#' + DX_COND_latex_FALSE= +fi + + DX_ENV="$DX_ENV GENERATE_LATEX='YES'" + +else + if false; then + DX_COND_latex_TRUE= + DX_COND_latex_FALSE='#' +else + DX_COND_latex_TRUE='#' + DX_COND_latex_FALSE= +fi + + DX_ENV="$DX_ENV GENERATE_LATEX='NO'" + +fi + +# Paper size for PS and/or PDF: + +case "$DOXYGEN_PAPER_SIZE" in +#( +"") + DOXYGEN_PAPER_SIZE="" + +;; #( +a4wide|a4|letter|legal|executive) + DX_ENV="$DX_ENV PAPER_SIZE='$DOXYGEN_PAPER_SIZE'" + +;; #( +*) + as_fn_error $? "unknown DOXYGEN_PAPER_SIZE='$DOXYGEN_PAPER_SIZE'" "$LINENO" 5 +;; +esac + +#For debugging: +#echo DX_FLAG_doc=$DX_FLAG_doc +#echo DX_FLAG_dot=$DX_FLAG_dot +#echo DX_FLAG_man=$DX_FLAG_man +#echo DX_FLAG_html=$DX_FLAG_html +#echo DX_FLAG_chm=$DX_FLAG_chm +#echo DX_FLAG_chi=$DX_FLAG_chi +#echo DX_FLAG_rtf=$DX_FLAG_rtf +#echo DX_FLAG_xml=$DX_FLAG_xml +#echo DX_FLAG_pdf=$DX_FLAG_pdf +#echo DX_FLAG_ps=$DX_FLAG_ps +#echo DX_ENV=$DX_ENV + + + + + + + + + +if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}pkg-config", so it can be a program name with args. +set dummy ${ac_tool_prefix}pkg-config; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_path_PKG_CONFIG+:} false; then : + $as_echo_n "(cached) " >&6 +else + case $PKG_CONFIG in + [\\/]* | ?:[\\/]*) + ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a path. + ;; + *) + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_path_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + + ;; +esac +fi +PKG_CONFIG=$ac_cv_path_PKG_CONFIG +if test -n "$PKG_CONFIG"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PKG_CONFIG" >&5 +$as_echo "$PKG_CONFIG" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_path_PKG_CONFIG"; then + ac_pt_PKG_CONFIG=$PKG_CONFIG + # Extract the first word of "pkg-config", so it can be a program name with args. +set dummy pkg-config; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_path_ac_pt_PKG_CONFIG+:} false; then : + $as_echo_n "(cached) " >&6 +else + case $ac_pt_PKG_CONFIG in + [\\/]* | ?:[\\/]*) + ac_cv_path_ac_pt_PKG_CONFIG="$ac_pt_PKG_CONFIG" # Let the user override the test with a path. + ;; + *) + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_path_ac_pt_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + + ;; +esac +fi +ac_pt_PKG_CONFIG=$ac_cv_path_ac_pt_PKG_CONFIG +if test -n "$ac_pt_PKG_CONFIG"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_pt_PKG_CONFIG" >&5 +$as_echo "$ac_pt_PKG_CONFIG" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_pt_PKG_CONFIG" = x; then + PKG_CONFIG="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + PKG_CONFIG=$ac_pt_PKG_CONFIG + fi +else + PKG_CONFIG="$ac_cv_path_PKG_CONFIG" +fi + +fi +if test -n "$PKG_CONFIG"; then + _pkg_min_version=0.9.0 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking pkg-config is at least version $_pkg_min_version" >&5 +$as_echo_n "checking pkg-config is at least version $_pkg_min_version... " >&6; } + if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + PKG_CONFIG="" + fi +fi + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ZLIB" >&5 +$as_echo_n "checking for ZLIB... " >&6; } + +if test -n "$ZLIB_CFLAGS"; then + pkg_cv_ZLIB_CFLAGS="$ZLIB_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"zlib >= 1.2.3\""; } >&5 + ($PKG_CONFIG --exists --print-errors "zlib >= 1.2.3") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_ZLIB_CFLAGS=`$PKG_CONFIG --cflags "zlib >= 1.2.3" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$ZLIB_LIBS"; then + pkg_cv_ZLIB_LIBS="$ZLIB_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"zlib >= 1.2.3\""; } >&5 + ($PKG_CONFIG --exists --print-errors "zlib >= 1.2.3") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_ZLIB_LIBS=`$PKG_CONFIG --libs "zlib >= 1.2.3" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + ZLIB_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "zlib >= 1.2.3" 2>&1` + else + ZLIB_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "zlib >= 1.2.3" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$ZLIB_PKG_ERRORS" >&5 + + as_fn_error $? "zlib 1.2.3 or newer not found." "$LINENO" 5 + +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + as_fn_error $? "zlib 1.2.3 or newer not found." "$LINENO" 5 + +else + ZLIB_CFLAGS=$pkg_cv_ZLIB_CFLAGS + ZLIB_LIBS=$pkg_cv_ZLIB_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + +cat >confcache <<\_ACEOF +# This file is a shell script that caches the results of configure +# tests run on this system so they can be shared between configure +# scripts and configure runs, see configure's option --config-cache. +# It is not useful on other systems. If it contains results you don't +# want to keep, you may remove or edit it. +# +# config.status only pays attention to the cache file if you give it +# the --recheck option to rerun configure. +# +# `ac_cv_env_foo' variables (set or unset) will be overridden when +# loading this file, other *unset* `ac_cv_foo' will be assigned the +# following values. + +_ACEOF + +# The following way of writing the cache mishandles newlines in values, +# but we know of no workaround that is simple, portable, and efficient. +# So, we kill variables containing newlines. +# Ultrix sh set writes to stderr and can't be redirected directly, +# and sets the high bit in the cache file unless we assign to the vars. +( + for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do + eval ac_val=\$$ac_var + case $ac_val in #( + *${as_nl}*) + case $ac_var in #( + *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 +$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; + esac + case $ac_var in #( + _ | IFS | as_nl) ;; #( + BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( + *) { eval $ac_var=; unset $ac_var;} ;; + esac ;; + esac + done + + (set) 2>&1 | + case $as_nl`(ac_space=' '; set) 2>&1` in #( + *${as_nl}ac_space=\ *) + # `set' does not quote correctly, so add quotes: double-quote + # substitution turns \\\\ into \\, and sed turns \\ into \. + sed -n \ + "s/'/'\\\\''/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" + ;; #( + *) + # `set' quotes correctly as required by POSIX, so do not add quotes. + sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" + ;; + esac | + sort +) | + sed ' + /^ac_cv_env_/b end + t clear + :clear + s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ + t end + s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ + :end' >>confcache +if diff "$cache_file" confcache >/dev/null 2>&1; then :; else + if test -w "$cache_file"; then + if test "x$cache_file" != "x/dev/null"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5 +$as_echo "$as_me: updating cache $cache_file" >&6;} + if test ! -f "$cache_file" || test -h "$cache_file"; then + cat confcache >"$cache_file" + else + case $cache_file in #( + */* | ?:*) + mv -f confcache "$cache_file"$$ && + mv -f "$cache_file"$$ "$cache_file" ;; #( + *) + mv -f confcache "$cache_file" ;; + esac + fi + fi + else + { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5 +$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;} + fi +fi +rm -f confcache + +test "x$prefix" = xNONE && prefix=$ac_default_prefix +# Let make expand exec_prefix. +test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' + +DEFS=-DHAVE_CONFIG_H + +ac_libobjs= +ac_ltlibobjs= +U= +for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue + # 1. Remove the extension, and $U if already installed. + ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' + ac_i=`$as_echo "$ac_i" | sed "$ac_script"` + # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR + # will be set to the directory where LIBOBJS objects are built. + as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext" + as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo' +done +LIBOBJS=$ac_libobjs + +LTLIBOBJS=$ac_ltlibobjs + + + if test -n "$EXEEXT"; then + am__EXEEXT_TRUE= + am__EXEEXT_FALSE='#' +else + am__EXEEXT_TRUE='#' + am__EXEEXT_FALSE= +fi + +if test -z "${MAINTAINER_MODE_TRUE}" && test -z "${MAINTAINER_MODE_FALSE}"; then + as_fn_error $? "conditional \"MAINTAINER_MODE\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then + as_fn_error $? "conditional \"AMDEP\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${am__fastdepCXX_TRUE}" && test -z "${am__fastdepCXX_FALSE}"; then + as_fn_error $? "conditional \"am__fastdepCXX\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then + as_fn_error $? "conditional \"am__fastdepCC\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${HAVE_GNU_STRERROR_TRUE}" && test -z "${HAVE_GNU_STRERROR_FALSE}"; then + as_fn_error $? "conditional \"HAVE_GNU_STRERROR\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${DX_COND_doc_TRUE}" && test -z "${DX_COND_doc_FALSE}"; then + as_fn_error $? "conditional \"DX_COND_doc\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${DX_COND_doc_TRUE}" && test -z "${DX_COND_doc_FALSE}"; then + as_fn_error $? "conditional \"DX_COND_doc\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${DX_COND_dot_TRUE}" && test -z "${DX_COND_dot_FALSE}"; then + as_fn_error $? "conditional \"DX_COND_dot\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${DX_COND_dot_TRUE}" && test -z "${DX_COND_dot_FALSE}"; then + as_fn_error $? "conditional \"DX_COND_dot\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${DX_COND_man_TRUE}" && test -z "${DX_COND_man_FALSE}"; then + as_fn_error $? "conditional \"DX_COND_man\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${DX_COND_man_TRUE}" && test -z "${DX_COND_man_FALSE}"; then + as_fn_error $? "conditional \"DX_COND_man\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${DX_COND_rtf_TRUE}" && test -z "${DX_COND_rtf_FALSE}"; then + as_fn_error $? "conditional \"DX_COND_rtf\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${DX_COND_rtf_TRUE}" && test -z "${DX_COND_rtf_FALSE}"; then + as_fn_error $? "conditional \"DX_COND_rtf\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${DX_COND_xml_TRUE}" && test -z "${DX_COND_xml_FALSE}"; then + as_fn_error $? "conditional \"DX_COND_xml\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${DX_COND_xml_TRUE}" && test -z "${DX_COND_xml_FALSE}"; then + as_fn_error $? "conditional \"DX_COND_xml\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${DX_COND_chm_TRUE}" && test -z "${DX_COND_chm_FALSE}"; then + as_fn_error $? "conditional \"DX_COND_chm\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${DX_COND_chm_TRUE}" && test -z "${DX_COND_chm_FALSE}"; then + as_fn_error $? "conditional \"DX_COND_chm\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${DX_COND_chi_TRUE}" && test -z "${DX_COND_chi_FALSE}"; then + as_fn_error $? "conditional \"DX_COND_chi\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${DX_COND_chi_TRUE}" && test -z "${DX_COND_chi_FALSE}"; then + as_fn_error $? "conditional \"DX_COND_chi\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${DX_COND_html_TRUE}" && test -z "${DX_COND_html_FALSE}"; then + as_fn_error $? "conditional \"DX_COND_html\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${DX_COND_html_TRUE}" && test -z "${DX_COND_html_FALSE}"; then + as_fn_error $? "conditional \"DX_COND_html\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${DX_COND_ps_TRUE}" && test -z "${DX_COND_ps_FALSE}"; then + as_fn_error $? "conditional \"DX_COND_ps\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${DX_COND_ps_TRUE}" && test -z "${DX_COND_ps_FALSE}"; then + as_fn_error $? "conditional \"DX_COND_ps\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${DX_COND_pdf_TRUE}" && test -z "${DX_COND_pdf_FALSE}"; then + as_fn_error $? "conditional \"DX_COND_pdf\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${DX_COND_pdf_TRUE}" && test -z "${DX_COND_pdf_FALSE}"; then + as_fn_error $? "conditional \"DX_COND_pdf\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${DX_COND_latex_TRUE}" && test -z "${DX_COND_latex_FALSE}"; then + as_fn_error $? "conditional \"DX_COND_latex\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${DX_COND_latex_TRUE}" && test -z "${DX_COND_latex_FALSE}"; then + as_fn_error $? "conditional \"DX_COND_latex\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi + +: "${CONFIG_STATUS=./config.status}" +ac_write_fail=0 +ac_clean_files_save=$ac_clean_files +ac_clean_files="$ac_clean_files $CONFIG_STATUS" +{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5 +$as_echo "$as_me: creating $CONFIG_STATUS" >&6;} +as_write_fail=0 +cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1 +#! $SHELL +# Generated by $as_me. +# Run this file to recreate the current configuration. +# Compiler output produced by configure, useful for debugging +# configure, is in config.log if it exists. + +debug=false +ac_cs_recheck=false +ac_cs_silent=false + +SHELL=\${CONFIG_SHELL-$SHELL} +export SHELL +_ASEOF +cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1 +## -------------------- ## +## M4sh Initialization. ## +## -------------------- ## + +# Be more Bourne compatible +DUALCASE=1; export DUALCASE # for MKS sh +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in #( + *posix*) : + set -o posix ;; #( + *) : + ;; +esac +fi + + +as_nl=' +' +export as_nl +# Printing a long string crashes Solaris 7 /usr/bin/printf. +as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo +# Prefer a ksh shell builtin over an external printf program on Solaris, +# but without wasting forks for bash or zsh. +if test -z "$BASH_VERSION$ZSH_VERSION" \ + && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='print -r --' + as_echo_n='print -rn --' +elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='printf %s\n' + as_echo_n='printf %s' +else + if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then + as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' + as_echo_n='/usr/ucb/echo -n' + else + as_echo_body='eval expr "X$1" : "X\\(.*\\)"' + as_echo_n_body='eval + arg=$1; + case $arg in #( + *"$as_nl"*) + expr "X$arg" : "X\\(.*\\)$as_nl"; + arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; + esac; + expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" + ' + export as_echo_n_body + as_echo_n='sh -c $as_echo_n_body as_echo' + fi + export as_echo_body + as_echo='sh -c $as_echo_body as_echo' +fi + +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + PATH_SEPARATOR=: + (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { + (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || + PATH_SEPARATOR=';' + } +fi + + +# IFS +# We need space, tab and new line, in precisely that order. Quoting is +# there to prevent editors from complaining about space-tab. +# (If _AS_PATH_WALK were called with IFS unset, it would disable word +# splitting by setting IFS to empty value.) +IFS=" "" $as_nl" + +# Find who we are. Look in the path if we contain no directory separator. +as_myself= +case $0 in #(( + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break + done +IFS=$as_save_IFS + + ;; +esac +# We did not find ourselves, most probably we were run as `sh COMMAND' +# in which case we are not to be found in the path. +if test "x$as_myself" = x; then + as_myself=$0 +fi +if test ! -f "$as_myself"; then + $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 + exit 1 +fi + +# Unset variables that we do not need and which cause bugs (e.g. in +# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" +# suppresses any "Segmentation fault" message there. '((' could +# trigger a bug in pdksh 5.2.14. +for as_var in BASH_ENV ENV MAIL MAILPATH +do eval test x\${$as_var+set} = xset \ + && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : +done +PS1='$ ' +PS2='> ' +PS4='+ ' + +# NLS nuisances. +LC_ALL=C +export LC_ALL +LANGUAGE=C +export LANGUAGE + +# CDPATH. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + + +# as_fn_error STATUS ERROR [LINENO LOG_FD] +# ---------------------------------------- +# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are +# provided, also output the error to LOG_FD, referencing LINENO. Then exit the +# script with STATUS, using 1 if that was 0. +as_fn_error () +{ + as_status=$1; test $as_status -eq 0 && as_status=1 + if test "$4"; then + as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 + fi + $as_echo "$as_me: error: $2" >&2 + as_fn_exit $as_status +} # as_fn_error + + +# as_fn_set_status STATUS +# ----------------------- +# Set $? to STATUS, without forking. +as_fn_set_status () +{ + return $1 +} # as_fn_set_status + +# as_fn_exit STATUS +# ----------------- +# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. +as_fn_exit () +{ + set +e + as_fn_set_status $1 + exit $1 +} # as_fn_exit + +# as_fn_unset VAR +# --------------- +# Portably unset VAR. +as_fn_unset () +{ + { eval $1=; unset $1;} +} +as_unset=as_fn_unset +# as_fn_append VAR VALUE +# ---------------------- +# Append the text in VALUE to the end of the definition contained in VAR. Take +# advantage of any shell optimizations that allow amortized linear growth over +# repeated appends, instead of the typical quadratic growth present in naive +# implementations. +if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : + eval 'as_fn_append () + { + eval $1+=\$2 + }' +else + as_fn_append () + { + eval $1=\$$1\$2 + } +fi # as_fn_append + +# as_fn_arith ARG... +# ------------------ +# Perform arithmetic evaluation on the ARGs, and store the result in the +# global $as_val. Take advantage of shells that can avoid forks. The arguments +# must be portable across $(()) and expr. +if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : + eval 'as_fn_arith () + { + as_val=$(( $* )) + }' +else + as_fn_arith () + { + as_val=`expr "$@" || test $? -eq 1` + } +fi # as_fn_arith + + +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr +else + as_expr=false +fi + +if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false +fi + +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then + as_dirname=dirname +else + as_dirname=false +fi + +as_me=`$as_basename -- "$0" || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ + s//\1/ + q + } + /^X\/\(\/\/\)$/{ + s//\1/ + q + } + /^X\/\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + +ECHO_C= ECHO_N= ECHO_T= +case `echo -n x` in #((((( +-n*) + case `echo 'xy\c'` in + *c*) ECHO_T=' ';; # ECHO_T is single tab character. + xy) ECHO_C='\c';; + *) echo `echo ksh88 bug on AIX 6.1` > /dev/null + ECHO_T=' ';; + esac;; +*) + ECHO_N='-n';; +esac + +rm -f conf$$ conf$$.exe conf$$.file +if test -d conf$$.dir; then + rm -f conf$$.dir/conf$$.file +else + rm -f conf$$.dir + mkdir conf$$.dir 2>/dev/null +fi +if (echo >conf$$.file) 2>/dev/null; then + if ln -s conf$$.file conf$$ 2>/dev/null; then + as_ln_s='ln -s' + # ... but there are two gotchas: + # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. + # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. + # In both cases, we have to default to `cp -p'. + ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || + as_ln_s='cp -p' + elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln + else + as_ln_s='cp -p' + fi +else + as_ln_s='cp -p' +fi +rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file +rmdir conf$$.dir 2>/dev/null + + +# as_fn_mkdir_p +# ------------- +# Create "$as_dir" as a directory, including parents if necessary. +as_fn_mkdir_p () +{ + + case $as_dir in #( + -*) as_dir=./$as_dir;; + esac + test -d "$as_dir" || eval $as_mkdir_p || { + as_dirs= + while :; do + case $as_dir in #( + *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( + *) as_qdir=$as_dir;; + esac + as_dirs="'$as_qdir' $as_dirs" + as_dir=`$as_dirname -- "$as_dir" || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + test -d "$as_dir" && break + done + test -z "$as_dirs" || eval "mkdir $as_dirs" + } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" + + +} # as_fn_mkdir_p +if mkdir -p . 2>/dev/null; then + as_mkdir_p='mkdir -p "$as_dir"' +else + test -d ./-p && rmdir ./-p + as_mkdir_p=false +fi + +if test -x / >/dev/null 2>&1; then + as_test_x='test -x' +else + if ls -dL / >/dev/null 2>&1; then + as_ls_L_option=L + else + as_ls_L_option= + fi + as_test_x=' + eval sh -c '\'' + if test -d "$1"; then + test -d "$1/."; + else + case $1 in #( + -*)set "./$1";; + esac; + case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #(( + ???[sx]*):;;*)false;;esac;fi + '\'' sh + ' +fi +as_executable_p=$as_test_x + +# Sed expression to map a string onto a valid CPP name. +as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" + +# Sed expression to map a string onto a valid variable name. +as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" + + +exec 6>&1 +## ----------------------------------- ## +## Main body of $CONFIG_STATUS script. ## +## ----------------------------------- ## +_ASEOF +test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1 + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +# Save the log message, to keep $0 and so on meaningful, and to +# report actual input values of CONFIG_FILES etc. instead of their +# values after options handling. +ac_log=" +This file was extended by libzipper $as_me 1.0.3, which was +generated by GNU Autoconf 2.68. Invocation command line was + + CONFIG_FILES = $CONFIG_FILES + CONFIG_HEADERS = $CONFIG_HEADERS + CONFIG_LINKS = $CONFIG_LINKS + CONFIG_COMMANDS = $CONFIG_COMMANDS + $ $0 $@ + +on `(hostname || uname -n) 2>/dev/null | sed 1q` +" + +_ACEOF + +case $ac_config_files in *" +"*) set x $ac_config_files; shift; ac_config_files=$*;; +esac + +case $ac_config_headers in *" +"*) set x $ac_config_headers; shift; ac_config_headers=$*;; +esac + + +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +# Files that config.status was made for. +config_files="$ac_config_files" +config_headers="$ac_config_headers" +config_commands="$ac_config_commands" + +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +ac_cs_usage="\ +\`$as_me' instantiates files and other configuration actions +from templates according to the current configuration. Unless the files +and actions are specified as TAGs, all are instantiated by default. + +Usage: $0 [OPTION]... [TAG]... + + -h, --help print this help, then exit + -V, --version print version number and configuration settings, then exit + --config print configuration, then exit + -q, --quiet, --silent + do not print progress messages + -d, --debug don't remove temporary files + --recheck update $as_me by reconfiguring in the same conditions + --file=FILE[:TEMPLATE] + instantiate the configuration file FILE + --header=FILE[:TEMPLATE] + instantiate the configuration header FILE + +Configuration files: +$config_files + +Configuration headers: +$config_headers + +Configuration commands: +$config_commands + +Report bugs to ." + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" +ac_cs_version="\\ +libzipper config.status 1.0.3 +configured by $0, generated by GNU Autoconf 2.68, + with options \\"\$ac_cs_config\\" + +Copyright (C) 2010 Free Software Foundation, Inc. +This config.status script is free software; the Free Software Foundation +gives unlimited permission to copy, distribute and modify it." + +ac_pwd='$ac_pwd' +srcdir='$srcdir' +INSTALL='$INSTALL' +MKDIR_P='$MKDIR_P' +AWK='$AWK' +test -n "\$AWK" || AWK=awk +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +# The default lists apply if the user does not specify any file. +ac_need_defaults=: +while test $# != 0 +do + case $1 in + --*=?*) + ac_option=`expr "X$1" : 'X\([^=]*\)='` + ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` + ac_shift=: + ;; + --*=) + ac_option=`expr "X$1" : 'X\([^=]*\)='` + ac_optarg= + ac_shift=: + ;; + *) + ac_option=$1 + ac_optarg=$2 + ac_shift=shift + ;; + esac + + case $ac_option in + # Handling of the options. + -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) + ac_cs_recheck=: ;; + --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) + $as_echo "$ac_cs_version"; exit ;; + --config | --confi | --conf | --con | --co | --c ) + $as_echo "$ac_cs_config"; exit ;; + --debug | --debu | --deb | --de | --d | -d ) + debug=: ;; + --file | --fil | --fi | --f ) + $ac_shift + case $ac_optarg in + *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; + '') as_fn_error $? "missing file argument" ;; + esac + as_fn_append CONFIG_FILES " '$ac_optarg'" + ac_need_defaults=false;; + --header | --heade | --head | --hea ) + $ac_shift + case $ac_optarg in + *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + as_fn_append CONFIG_HEADERS " '$ac_optarg'" + ac_need_defaults=false;; + --he | --h) + # Conflict between --help and --header + as_fn_error $? "ambiguous option: \`$1' +Try \`$0 --help' for more information.";; + --help | --hel | -h ) + $as_echo "$ac_cs_usage"; exit ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil | --si | --s) + ac_cs_silent=: ;; + + # This is an error. + -*) as_fn_error $? "unrecognized option: \`$1' +Try \`$0 --help' for more information." ;; + + *) as_fn_append ac_config_targets " $1" + ac_need_defaults=false ;; + + esac + shift +done + +ac_configure_extra_args= + +if $ac_cs_silent; then + exec 6>/dev/null + ac_configure_extra_args="$ac_configure_extra_args --silent" +fi + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +if \$ac_cs_recheck; then + set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion + shift + \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6 + CONFIG_SHELL='$SHELL' + export CONFIG_SHELL + exec "\$@" +fi + +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +exec 5>>config.log +{ + echo + sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX +## Running $as_me. ## +_ASBOX + $as_echo "$ac_log" +} >&5 + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +# +# INIT-COMMANDS +# +AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" + + +# The HP-UX ksh and POSIX shell print the target directory to stdout +# if CDPATH is set. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + +sed_quote_subst='$sed_quote_subst' +double_quote_subst='$double_quote_subst' +delay_variable_subst='$delay_variable_subst' +macro_version='`$ECHO "$macro_version" | $SED "$delay_single_quote_subst"`' +macro_revision='`$ECHO "$macro_revision" | $SED "$delay_single_quote_subst"`' +enable_shared='`$ECHO "$enable_shared" | $SED "$delay_single_quote_subst"`' +enable_static='`$ECHO "$enable_static" | $SED "$delay_single_quote_subst"`' +pic_mode='`$ECHO "$pic_mode" | $SED "$delay_single_quote_subst"`' +enable_fast_install='`$ECHO "$enable_fast_install" | $SED "$delay_single_quote_subst"`' +SHELL='`$ECHO "$SHELL" | $SED "$delay_single_quote_subst"`' +ECHO='`$ECHO "$ECHO" | $SED "$delay_single_quote_subst"`' +host_alias='`$ECHO "$host_alias" | $SED "$delay_single_quote_subst"`' +host='`$ECHO "$host" | $SED "$delay_single_quote_subst"`' +host_os='`$ECHO "$host_os" | $SED "$delay_single_quote_subst"`' +build_alias='`$ECHO "$build_alias" | $SED "$delay_single_quote_subst"`' +build='`$ECHO "$build" | $SED "$delay_single_quote_subst"`' +build_os='`$ECHO "$build_os" | $SED "$delay_single_quote_subst"`' +SED='`$ECHO "$SED" | $SED "$delay_single_quote_subst"`' +Xsed='`$ECHO "$Xsed" | $SED "$delay_single_quote_subst"`' +GREP='`$ECHO "$GREP" | $SED "$delay_single_quote_subst"`' +EGREP='`$ECHO "$EGREP" | $SED "$delay_single_quote_subst"`' +FGREP='`$ECHO "$FGREP" | $SED "$delay_single_quote_subst"`' +LD='`$ECHO "$LD" | $SED "$delay_single_quote_subst"`' +NM='`$ECHO "$NM" | $SED "$delay_single_quote_subst"`' +LN_S='`$ECHO "$LN_S" | $SED "$delay_single_quote_subst"`' +max_cmd_len='`$ECHO "$max_cmd_len" | $SED "$delay_single_quote_subst"`' +ac_objext='`$ECHO "$ac_objext" | $SED "$delay_single_quote_subst"`' +exeext='`$ECHO "$exeext" | $SED "$delay_single_quote_subst"`' +lt_unset='`$ECHO "$lt_unset" | $SED "$delay_single_quote_subst"`' +lt_SP2NL='`$ECHO "$lt_SP2NL" | $SED "$delay_single_quote_subst"`' +lt_NL2SP='`$ECHO "$lt_NL2SP" | $SED "$delay_single_quote_subst"`' +lt_cv_to_host_file_cmd='`$ECHO "$lt_cv_to_host_file_cmd" | $SED "$delay_single_quote_subst"`' +lt_cv_to_tool_file_cmd='`$ECHO "$lt_cv_to_tool_file_cmd" | $SED "$delay_single_quote_subst"`' +reload_flag='`$ECHO "$reload_flag" | $SED "$delay_single_quote_subst"`' +reload_cmds='`$ECHO "$reload_cmds" | $SED "$delay_single_quote_subst"`' +OBJDUMP='`$ECHO "$OBJDUMP" | $SED "$delay_single_quote_subst"`' +deplibs_check_method='`$ECHO "$deplibs_check_method" | $SED "$delay_single_quote_subst"`' +file_magic_cmd='`$ECHO "$file_magic_cmd" | $SED "$delay_single_quote_subst"`' +file_magic_glob='`$ECHO "$file_magic_glob" | $SED "$delay_single_quote_subst"`' +want_nocaseglob='`$ECHO "$want_nocaseglob" | $SED "$delay_single_quote_subst"`' +DLLTOOL='`$ECHO "$DLLTOOL" | $SED "$delay_single_quote_subst"`' +sharedlib_from_linklib_cmd='`$ECHO "$sharedlib_from_linklib_cmd" | $SED "$delay_single_quote_subst"`' +AR='`$ECHO "$AR" | $SED "$delay_single_quote_subst"`' +AR_FLAGS='`$ECHO "$AR_FLAGS" | $SED "$delay_single_quote_subst"`' +archiver_list_spec='`$ECHO "$archiver_list_spec" | $SED "$delay_single_quote_subst"`' +STRIP='`$ECHO "$STRIP" | $SED "$delay_single_quote_subst"`' +RANLIB='`$ECHO "$RANLIB" | $SED "$delay_single_quote_subst"`' +old_postinstall_cmds='`$ECHO "$old_postinstall_cmds" | $SED "$delay_single_quote_subst"`' +old_postuninstall_cmds='`$ECHO "$old_postuninstall_cmds" | $SED "$delay_single_quote_subst"`' +old_archive_cmds='`$ECHO "$old_archive_cmds" | $SED "$delay_single_quote_subst"`' +lock_old_archive_extraction='`$ECHO "$lock_old_archive_extraction" | $SED "$delay_single_quote_subst"`' +CC='`$ECHO "$CC" | $SED "$delay_single_quote_subst"`' +CFLAGS='`$ECHO "$CFLAGS" | $SED "$delay_single_quote_subst"`' +compiler='`$ECHO "$compiler" | $SED "$delay_single_quote_subst"`' +GCC='`$ECHO "$GCC" | $SED "$delay_single_quote_subst"`' +lt_cv_sys_global_symbol_pipe='`$ECHO "$lt_cv_sys_global_symbol_pipe" | $SED "$delay_single_quote_subst"`' +lt_cv_sys_global_symbol_to_cdecl='`$ECHO "$lt_cv_sys_global_symbol_to_cdecl" | $SED "$delay_single_quote_subst"`' +lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address" | $SED "$delay_single_quote_subst"`' +lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $SED "$delay_single_quote_subst"`' +nm_file_list_spec='`$ECHO "$nm_file_list_spec" | $SED "$delay_single_quote_subst"`' +lt_sysroot='`$ECHO "$lt_sysroot" | $SED "$delay_single_quote_subst"`' +objdir='`$ECHO "$objdir" | $SED "$delay_single_quote_subst"`' +MAGIC_CMD='`$ECHO "$MAGIC_CMD" | $SED "$delay_single_quote_subst"`' +lt_prog_compiler_no_builtin_flag='`$ECHO "$lt_prog_compiler_no_builtin_flag" | $SED "$delay_single_quote_subst"`' +lt_prog_compiler_pic='`$ECHO "$lt_prog_compiler_pic" | $SED "$delay_single_quote_subst"`' +lt_prog_compiler_wl='`$ECHO "$lt_prog_compiler_wl" | $SED "$delay_single_quote_subst"`' +lt_prog_compiler_static='`$ECHO "$lt_prog_compiler_static" | $SED "$delay_single_quote_subst"`' +lt_cv_prog_compiler_c_o='`$ECHO "$lt_cv_prog_compiler_c_o" | $SED "$delay_single_quote_subst"`' +need_locks='`$ECHO "$need_locks" | $SED "$delay_single_quote_subst"`' +MANIFEST_TOOL='`$ECHO "$MANIFEST_TOOL" | $SED "$delay_single_quote_subst"`' +DSYMUTIL='`$ECHO "$DSYMUTIL" | $SED "$delay_single_quote_subst"`' +NMEDIT='`$ECHO "$NMEDIT" | $SED "$delay_single_quote_subst"`' +LIPO='`$ECHO "$LIPO" | $SED "$delay_single_quote_subst"`' +OTOOL='`$ECHO "$OTOOL" | $SED "$delay_single_quote_subst"`' +OTOOL64='`$ECHO "$OTOOL64" | $SED "$delay_single_quote_subst"`' +libext='`$ECHO "$libext" | $SED "$delay_single_quote_subst"`' +shrext_cmds='`$ECHO "$shrext_cmds" | $SED "$delay_single_quote_subst"`' +extract_expsyms_cmds='`$ECHO "$extract_expsyms_cmds" | $SED "$delay_single_quote_subst"`' +archive_cmds_need_lc='`$ECHO "$archive_cmds_need_lc" | $SED "$delay_single_quote_subst"`' +enable_shared_with_static_runtimes='`$ECHO "$enable_shared_with_static_runtimes" | $SED "$delay_single_quote_subst"`' +export_dynamic_flag_spec='`$ECHO "$export_dynamic_flag_spec" | $SED "$delay_single_quote_subst"`' +whole_archive_flag_spec='`$ECHO "$whole_archive_flag_spec" | $SED "$delay_single_quote_subst"`' +compiler_needs_object='`$ECHO "$compiler_needs_object" | $SED "$delay_single_quote_subst"`' +old_archive_from_new_cmds='`$ECHO "$old_archive_from_new_cmds" | $SED "$delay_single_quote_subst"`' +old_archive_from_expsyms_cmds='`$ECHO "$old_archive_from_expsyms_cmds" | $SED "$delay_single_quote_subst"`' +archive_cmds='`$ECHO "$archive_cmds" | $SED "$delay_single_quote_subst"`' +archive_expsym_cmds='`$ECHO "$archive_expsym_cmds" | $SED "$delay_single_quote_subst"`' +module_cmds='`$ECHO "$module_cmds" | $SED "$delay_single_quote_subst"`' +module_expsym_cmds='`$ECHO "$module_expsym_cmds" | $SED "$delay_single_quote_subst"`' +with_gnu_ld='`$ECHO "$with_gnu_ld" | $SED "$delay_single_quote_subst"`' +allow_undefined_flag='`$ECHO "$allow_undefined_flag" | $SED "$delay_single_quote_subst"`' +no_undefined_flag='`$ECHO "$no_undefined_flag" | $SED "$delay_single_quote_subst"`' +hardcode_libdir_flag_spec='`$ECHO "$hardcode_libdir_flag_spec" | $SED "$delay_single_quote_subst"`' +hardcode_libdir_flag_spec_ld='`$ECHO "$hardcode_libdir_flag_spec_ld" | $SED "$delay_single_quote_subst"`' +hardcode_libdir_separator='`$ECHO "$hardcode_libdir_separator" | $SED "$delay_single_quote_subst"`' +hardcode_direct='`$ECHO "$hardcode_direct" | $SED "$delay_single_quote_subst"`' +hardcode_direct_absolute='`$ECHO "$hardcode_direct_absolute" | $SED "$delay_single_quote_subst"`' +hardcode_minus_L='`$ECHO "$hardcode_minus_L" | $SED "$delay_single_quote_subst"`' +hardcode_shlibpath_var='`$ECHO "$hardcode_shlibpath_var" | $SED "$delay_single_quote_subst"`' +hardcode_automatic='`$ECHO "$hardcode_automatic" | $SED "$delay_single_quote_subst"`' +inherit_rpath='`$ECHO "$inherit_rpath" | $SED "$delay_single_quote_subst"`' +link_all_deplibs='`$ECHO "$link_all_deplibs" | $SED "$delay_single_quote_subst"`' +always_export_symbols='`$ECHO "$always_export_symbols" | $SED "$delay_single_quote_subst"`' +export_symbols_cmds='`$ECHO "$export_symbols_cmds" | $SED "$delay_single_quote_subst"`' +exclude_expsyms='`$ECHO "$exclude_expsyms" | $SED "$delay_single_quote_subst"`' +include_expsyms='`$ECHO "$include_expsyms" | $SED "$delay_single_quote_subst"`' +prelink_cmds='`$ECHO "$prelink_cmds" | $SED "$delay_single_quote_subst"`' +postlink_cmds='`$ECHO "$postlink_cmds" | $SED "$delay_single_quote_subst"`' +file_list_spec='`$ECHO "$file_list_spec" | $SED "$delay_single_quote_subst"`' +variables_saved_for_relink='`$ECHO "$variables_saved_for_relink" | $SED "$delay_single_quote_subst"`' +need_lib_prefix='`$ECHO "$need_lib_prefix" | $SED "$delay_single_quote_subst"`' +need_version='`$ECHO "$need_version" | $SED "$delay_single_quote_subst"`' +version_type='`$ECHO "$version_type" | $SED "$delay_single_quote_subst"`' +runpath_var='`$ECHO "$runpath_var" | $SED "$delay_single_quote_subst"`' +shlibpath_var='`$ECHO "$shlibpath_var" | $SED "$delay_single_quote_subst"`' +shlibpath_overrides_runpath='`$ECHO "$shlibpath_overrides_runpath" | $SED "$delay_single_quote_subst"`' +libname_spec='`$ECHO "$libname_spec" | $SED "$delay_single_quote_subst"`' +library_names_spec='`$ECHO "$library_names_spec" | $SED "$delay_single_quote_subst"`' +soname_spec='`$ECHO "$soname_spec" | $SED "$delay_single_quote_subst"`' +install_override_mode='`$ECHO "$install_override_mode" | $SED "$delay_single_quote_subst"`' +postinstall_cmds='`$ECHO "$postinstall_cmds" | $SED "$delay_single_quote_subst"`' +postuninstall_cmds='`$ECHO "$postuninstall_cmds" | $SED "$delay_single_quote_subst"`' +finish_cmds='`$ECHO "$finish_cmds" | $SED "$delay_single_quote_subst"`' +finish_eval='`$ECHO "$finish_eval" | $SED "$delay_single_quote_subst"`' +hardcode_into_libs='`$ECHO "$hardcode_into_libs" | $SED "$delay_single_quote_subst"`' +sys_lib_search_path_spec='`$ECHO "$sys_lib_search_path_spec" | $SED "$delay_single_quote_subst"`' +sys_lib_dlsearch_path_spec='`$ECHO "$sys_lib_dlsearch_path_spec" | $SED "$delay_single_quote_subst"`' +hardcode_action='`$ECHO "$hardcode_action" | $SED "$delay_single_quote_subst"`' +enable_dlopen='`$ECHO "$enable_dlopen" | $SED "$delay_single_quote_subst"`' +enable_dlopen_self='`$ECHO "$enable_dlopen_self" | $SED "$delay_single_quote_subst"`' +enable_dlopen_self_static='`$ECHO "$enable_dlopen_self_static" | $SED "$delay_single_quote_subst"`' +old_striplib='`$ECHO "$old_striplib" | $SED "$delay_single_quote_subst"`' +striplib='`$ECHO "$striplib" | $SED "$delay_single_quote_subst"`' +compiler_lib_search_dirs='`$ECHO "$compiler_lib_search_dirs" | $SED "$delay_single_quote_subst"`' +predep_objects='`$ECHO "$predep_objects" | $SED "$delay_single_quote_subst"`' +postdep_objects='`$ECHO "$postdep_objects" | $SED "$delay_single_quote_subst"`' +predeps='`$ECHO "$predeps" | $SED "$delay_single_quote_subst"`' +postdeps='`$ECHO "$postdeps" | $SED "$delay_single_quote_subst"`' +compiler_lib_search_path='`$ECHO "$compiler_lib_search_path" | $SED "$delay_single_quote_subst"`' +LD_CXX='`$ECHO "$LD_CXX" | $SED "$delay_single_quote_subst"`' +reload_flag_CXX='`$ECHO "$reload_flag_CXX" | $SED "$delay_single_quote_subst"`' +reload_cmds_CXX='`$ECHO "$reload_cmds_CXX" | $SED "$delay_single_quote_subst"`' +old_archive_cmds_CXX='`$ECHO "$old_archive_cmds_CXX" | $SED "$delay_single_quote_subst"`' +compiler_CXX='`$ECHO "$compiler_CXX" | $SED "$delay_single_quote_subst"`' +GCC_CXX='`$ECHO "$GCC_CXX" | $SED "$delay_single_quote_subst"`' +lt_prog_compiler_no_builtin_flag_CXX='`$ECHO "$lt_prog_compiler_no_builtin_flag_CXX" | $SED "$delay_single_quote_subst"`' +lt_prog_compiler_pic_CXX='`$ECHO "$lt_prog_compiler_pic_CXX" | $SED "$delay_single_quote_subst"`' +lt_prog_compiler_wl_CXX='`$ECHO "$lt_prog_compiler_wl_CXX" | $SED "$delay_single_quote_subst"`' +lt_prog_compiler_static_CXX='`$ECHO "$lt_prog_compiler_static_CXX" | $SED "$delay_single_quote_subst"`' +lt_cv_prog_compiler_c_o_CXX='`$ECHO "$lt_cv_prog_compiler_c_o_CXX" | $SED "$delay_single_quote_subst"`' +archive_cmds_need_lc_CXX='`$ECHO "$archive_cmds_need_lc_CXX" | $SED "$delay_single_quote_subst"`' +enable_shared_with_static_runtimes_CXX='`$ECHO "$enable_shared_with_static_runtimes_CXX" | $SED "$delay_single_quote_subst"`' +export_dynamic_flag_spec_CXX='`$ECHO "$export_dynamic_flag_spec_CXX" | $SED "$delay_single_quote_subst"`' +whole_archive_flag_spec_CXX='`$ECHO "$whole_archive_flag_spec_CXX" | $SED "$delay_single_quote_subst"`' +compiler_needs_object_CXX='`$ECHO "$compiler_needs_object_CXX" | $SED "$delay_single_quote_subst"`' +old_archive_from_new_cmds_CXX='`$ECHO "$old_archive_from_new_cmds_CXX" | $SED "$delay_single_quote_subst"`' +old_archive_from_expsyms_cmds_CXX='`$ECHO "$old_archive_from_expsyms_cmds_CXX" | $SED "$delay_single_quote_subst"`' +archive_cmds_CXX='`$ECHO "$archive_cmds_CXX" | $SED "$delay_single_quote_subst"`' +archive_expsym_cmds_CXX='`$ECHO "$archive_expsym_cmds_CXX" | $SED "$delay_single_quote_subst"`' +module_cmds_CXX='`$ECHO "$module_cmds_CXX" | $SED "$delay_single_quote_subst"`' +module_expsym_cmds_CXX='`$ECHO "$module_expsym_cmds_CXX" | $SED "$delay_single_quote_subst"`' +with_gnu_ld_CXX='`$ECHO "$with_gnu_ld_CXX" | $SED "$delay_single_quote_subst"`' +allow_undefined_flag_CXX='`$ECHO "$allow_undefined_flag_CXX" | $SED "$delay_single_quote_subst"`' +no_undefined_flag_CXX='`$ECHO "$no_undefined_flag_CXX" | $SED "$delay_single_quote_subst"`' +hardcode_libdir_flag_spec_CXX='`$ECHO "$hardcode_libdir_flag_spec_CXX" | $SED "$delay_single_quote_subst"`' +hardcode_libdir_flag_spec_ld_CXX='`$ECHO "$hardcode_libdir_flag_spec_ld_CXX" | $SED "$delay_single_quote_subst"`' +hardcode_libdir_separator_CXX='`$ECHO "$hardcode_libdir_separator_CXX" | $SED "$delay_single_quote_subst"`' +hardcode_direct_CXX='`$ECHO "$hardcode_direct_CXX" | $SED "$delay_single_quote_subst"`' +hardcode_direct_absolute_CXX='`$ECHO "$hardcode_direct_absolute_CXX" | $SED "$delay_single_quote_subst"`' +hardcode_minus_L_CXX='`$ECHO "$hardcode_minus_L_CXX" | $SED "$delay_single_quote_subst"`' +hardcode_shlibpath_var_CXX='`$ECHO "$hardcode_shlibpath_var_CXX" | $SED "$delay_single_quote_subst"`' +hardcode_automatic_CXX='`$ECHO "$hardcode_automatic_CXX" | $SED "$delay_single_quote_subst"`' +inherit_rpath_CXX='`$ECHO "$inherit_rpath_CXX" | $SED "$delay_single_quote_subst"`' +link_all_deplibs_CXX='`$ECHO "$link_all_deplibs_CXX" | $SED "$delay_single_quote_subst"`' +always_export_symbols_CXX='`$ECHO "$always_export_symbols_CXX" | $SED "$delay_single_quote_subst"`' +export_symbols_cmds_CXX='`$ECHO "$export_symbols_cmds_CXX" | $SED "$delay_single_quote_subst"`' +exclude_expsyms_CXX='`$ECHO "$exclude_expsyms_CXX" | $SED "$delay_single_quote_subst"`' +include_expsyms_CXX='`$ECHO "$include_expsyms_CXX" | $SED "$delay_single_quote_subst"`' +prelink_cmds_CXX='`$ECHO "$prelink_cmds_CXX" | $SED "$delay_single_quote_subst"`' +postlink_cmds_CXX='`$ECHO "$postlink_cmds_CXX" | $SED "$delay_single_quote_subst"`' +file_list_spec_CXX='`$ECHO "$file_list_spec_CXX" | $SED "$delay_single_quote_subst"`' +hardcode_action_CXX='`$ECHO "$hardcode_action_CXX" | $SED "$delay_single_quote_subst"`' +compiler_lib_search_dirs_CXX='`$ECHO "$compiler_lib_search_dirs_CXX" | $SED "$delay_single_quote_subst"`' +predep_objects_CXX='`$ECHO "$predep_objects_CXX" | $SED "$delay_single_quote_subst"`' +postdep_objects_CXX='`$ECHO "$postdep_objects_CXX" | $SED "$delay_single_quote_subst"`' +predeps_CXX='`$ECHO "$predeps_CXX" | $SED "$delay_single_quote_subst"`' +postdeps_CXX='`$ECHO "$postdeps_CXX" | $SED "$delay_single_quote_subst"`' +compiler_lib_search_path_CXX='`$ECHO "$compiler_lib_search_path_CXX" | $SED "$delay_single_quote_subst"`' + +LTCC='$LTCC' +LTCFLAGS='$LTCFLAGS' +compiler='$compiler_DEFAULT' + +# A function that is used when there is no print builtin or printf. +func_fallback_echo () +{ + eval 'cat <<_LTECHO_EOF +\$1 +_LTECHO_EOF' +} + +# Quote evaled strings. +for var in SHELL \ +ECHO \ +SED \ +GREP \ +EGREP \ +FGREP \ +LD \ +NM \ +LN_S \ +lt_SP2NL \ +lt_NL2SP \ +reload_flag \ +OBJDUMP \ +deplibs_check_method \ +file_magic_cmd \ +file_magic_glob \ +want_nocaseglob \ +DLLTOOL \ +sharedlib_from_linklib_cmd \ +AR \ +AR_FLAGS \ +archiver_list_spec \ +STRIP \ +RANLIB \ +CC \ +CFLAGS \ +compiler \ +lt_cv_sys_global_symbol_pipe \ +lt_cv_sys_global_symbol_to_cdecl \ +lt_cv_sys_global_symbol_to_c_name_address \ +lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \ +nm_file_list_spec \ +lt_prog_compiler_no_builtin_flag \ +lt_prog_compiler_pic \ +lt_prog_compiler_wl \ +lt_prog_compiler_static \ +lt_cv_prog_compiler_c_o \ +need_locks \ +MANIFEST_TOOL \ +DSYMUTIL \ +NMEDIT \ +LIPO \ +OTOOL \ +OTOOL64 \ +shrext_cmds \ +export_dynamic_flag_spec \ +whole_archive_flag_spec \ +compiler_needs_object \ +with_gnu_ld \ +allow_undefined_flag \ +no_undefined_flag \ +hardcode_libdir_flag_spec \ +hardcode_libdir_flag_spec_ld \ +hardcode_libdir_separator \ +exclude_expsyms \ +include_expsyms \ +file_list_spec \ +variables_saved_for_relink \ +libname_spec \ +library_names_spec \ +soname_spec \ +install_override_mode \ +finish_eval \ +old_striplib \ +striplib \ +compiler_lib_search_dirs \ +predep_objects \ +postdep_objects \ +predeps \ +postdeps \ +compiler_lib_search_path \ +LD_CXX \ +reload_flag_CXX \ +compiler_CXX \ +lt_prog_compiler_no_builtin_flag_CXX \ +lt_prog_compiler_pic_CXX \ +lt_prog_compiler_wl_CXX \ +lt_prog_compiler_static_CXX \ +lt_cv_prog_compiler_c_o_CXX \ +export_dynamic_flag_spec_CXX \ +whole_archive_flag_spec_CXX \ +compiler_needs_object_CXX \ +with_gnu_ld_CXX \ +allow_undefined_flag_CXX \ +no_undefined_flag_CXX \ +hardcode_libdir_flag_spec_CXX \ +hardcode_libdir_flag_spec_ld_CXX \ +hardcode_libdir_separator_CXX \ +exclude_expsyms_CXX \ +include_expsyms_CXX \ +file_list_spec_CXX \ +compiler_lib_search_dirs_CXX \ +predep_objects_CXX \ +postdep_objects_CXX \ +predeps_CXX \ +postdeps_CXX \ +compiler_lib_search_path_CXX; do + case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in + *[\\\\\\\`\\"\\\$]*) + eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" + ;; + *) + eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" + ;; + esac +done + +# Double-quote double-evaled strings. +for var in reload_cmds \ +old_postinstall_cmds \ +old_postuninstall_cmds \ +old_archive_cmds \ +extract_expsyms_cmds \ +old_archive_from_new_cmds \ +old_archive_from_expsyms_cmds \ +archive_cmds \ +archive_expsym_cmds \ +module_cmds \ +module_expsym_cmds \ +export_symbols_cmds \ +prelink_cmds \ +postlink_cmds \ +postinstall_cmds \ +postuninstall_cmds \ +finish_cmds \ +sys_lib_search_path_spec \ +sys_lib_dlsearch_path_spec \ +reload_cmds_CXX \ +old_archive_cmds_CXX \ +old_archive_from_new_cmds_CXX \ +old_archive_from_expsyms_cmds_CXX \ +archive_cmds_CXX \ +archive_expsym_cmds_CXX \ +module_cmds_CXX \ +module_expsym_cmds_CXX \ +export_symbols_cmds_CXX \ +prelink_cmds_CXX \ +postlink_cmds_CXX; do + case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in + *[\\\\\\\`\\"\\\$]*) + eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" + ;; + *) + eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" + ;; + esac +done + +ac_aux_dir='$ac_aux_dir' +xsi_shell='$xsi_shell' +lt_shell_append='$lt_shell_append' + +# See if we are running on zsh, and set the options which allow our +# commands through without removal of \ escapes INIT. +if test -n "\${ZSH_VERSION+set}" ; then + setopt NO_GLOB_SUBST +fi + + + PACKAGE='$PACKAGE' + VERSION='$VERSION' + TIMESTAMP='$TIMESTAMP' + RM='$RM' + ofile='$ofile' + + + + + + +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 + +# Handling of arguments. +for ac_config_target in $ac_config_targets +do + case $ac_config_target in + "autoconfig.h") CONFIG_HEADERS="$CONFIG_HEADERS autoconfig.h" ;; + "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; + "Doxyfile") CONFIG_FILES="$CONFIG_FILES Doxyfile" ;; + "libzipper1.pc") CONFIG_FILES="$CONFIG_FILES libzipper1.pc" ;; + "zipper.1") CONFIG_FILES="$CONFIG_FILES zipper.1" ;; + "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; + "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;; + + *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;; + esac +done + + +# If the user did not use the arguments to specify the items to instantiate, +# then the envvar interface is used. Set only those that are not. +# We use the long form for the default assignment because of an extremely +# bizarre bug on SunOS 4.1.3. +if $ac_need_defaults; then + test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files + test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers + test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands +fi + +# Have a temporary directory for convenience. Make it in the build tree +# simply because there is no reason against having it here, and in addition, +# creating and moving files from /tmp can sometimes cause problems. +# Hook for its removal unless debugging. +# Note that there is a small window in which the directory will not be cleaned: +# after its creation but before its name has been assigned to `$tmp'. +$debug || +{ + tmp= ac_tmp= + trap 'exit_status=$? + : "${ac_tmp:=$tmp}" + { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status +' 0 + trap 'as_fn_exit 1' 1 2 13 15 +} +# Create a (secure) tmp directory for tmp files. + +{ + tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && + test -d "$tmp" +} || +{ + tmp=./conf$$-$RANDOM + (umask 077 && mkdir "$tmp") +} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5 +ac_tmp=$tmp + +# Set up the scripts for CONFIG_FILES section. +# No need to generate them if there are no CONFIG_FILES. +# This happens for instance with `./config.status config.h'. +if test -n "$CONFIG_FILES"; then + + +ac_cr=`echo X | tr X '\015'` +# On cygwin, bash can eat \r inside `` if the user requested igncr. +# But we know of no other shell where ac_cr would be empty at this +# point, so we can use a bashism as a fallback. +if test "x$ac_cr" = x; then + eval ac_cr=\$\'\\r\' +fi +ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' /dev/null` +if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then + ac_cs_awk_cr='\\r' +else + ac_cs_awk_cr=$ac_cr +fi + +echo 'BEGIN {' >"$ac_tmp/subs1.awk" && +_ACEOF + + +{ + echo "cat >conf$$subs.awk <<_ACEOF" && + echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' && + echo "_ACEOF" +} >conf$$subs.sh || + as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 +ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'` +ac_delim='%!_!# ' +for ac_last_try in false false false false false :; do + . ./conf$$subs.sh || + as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 + + ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` + if test $ac_delim_n = $ac_delim_num; then + break + elif $ac_last_try; then + as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 + else + ac_delim="$ac_delim!$ac_delim _$ac_delim!! " + fi +done +rm -f conf$$subs.sh + +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK && +_ACEOF +sed -n ' +h +s/^/S["/; s/!.*/"]=/ +p +g +s/^[^!]*!// +:repl +t repl +s/'"$ac_delim"'$// +t delim +:nl +h +s/\(.\{148\}\)..*/\1/ +t more1 +s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/ +p +n +b repl +:more1 +s/["\\]/\\&/g; s/^/"/; s/$/"\\/ +p +g +s/.\{148\}// +t nl +:delim +h +s/\(.\{148\}\)..*/\1/ +t more2 +s/["\\]/\\&/g; s/^/"/; s/$/"/ +p +b +:more2 +s/["\\]/\\&/g; s/^/"/; s/$/"\\/ +p +g +s/.\{148\}// +t delim +' >$CONFIG_STATUS || ac_write_fail=1 +rm -f conf$$subs.awk +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +_ACAWK +cat >>"\$ac_tmp/subs1.awk" <<_ACAWK && + for (key in S) S_is_set[key] = 1 + FS = "" + +} +{ + line = $ 0 + nfields = split(line, field, "@") + substed = 0 + len = length(field[1]) + for (i = 2; i < nfields; i++) { + key = field[i] + keylen = length(key) + if (S_is_set[key]) { + value = S[key] + line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3) + len += length(value) + length(field[++i]) + substed = 1 + } else + len += 1 + keylen + } + + print line +} + +_ACAWK +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then + sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g" +else + cat +fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \ + || as_fn_error $? "could not setup config files machinery" "$LINENO" 5 +_ACEOF + +# VPATH may cause trouble with some makes, so we remove sole $(srcdir), +# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and +# trailing colons and then remove the whole line if VPATH becomes empty +# (actually we leave an empty line to preserve line numbers). +if test "x$srcdir" = x.; then + ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{ +h +s/// +s/^/:/ +s/[ ]*$/:/ +s/:\$(srcdir):/:/g +s/:\${srcdir}:/:/g +s/:@srcdir@:/:/g +s/^:*// +s/:*$// +x +s/\(=[ ]*\).*/\1/ +G +s/\n// +s/^[^=]*=[ ]*$// +}' +fi + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +fi # test -n "$CONFIG_FILES" + +# Set up the scripts for CONFIG_HEADERS section. +# No need to generate them if there are no CONFIG_HEADERS. +# This happens for instance with `./config.status Makefile'. +if test -n "$CONFIG_HEADERS"; then +cat >"$ac_tmp/defines.awk" <<\_ACAWK || +BEGIN { +_ACEOF + +# Transform confdefs.h into an awk script `defines.awk', embedded as +# here-document in config.status, that substitutes the proper values into +# config.h.in to produce config.h. + +# Create a delimiter string that does not exist in confdefs.h, to ease +# handling of long lines. +ac_delim='%!_!# ' +for ac_last_try in false false :; do + ac_tt=`sed -n "/$ac_delim/p" confdefs.h` + if test -z "$ac_tt"; then + break + elif $ac_last_try; then + as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5 + else + ac_delim="$ac_delim!$ac_delim _$ac_delim!! " + fi +done + +# For the awk script, D is an array of macro values keyed by name, +# likewise P contains macro parameters if any. Preserve backslash +# newline sequences. + +ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]* +sed -n ' +s/.\{148\}/&'"$ac_delim"'/g +t rset +:rset +s/^[ ]*#[ ]*define[ ][ ]*/ / +t def +d +:def +s/\\$// +t bsnl +s/["\\]/\\&/g +s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ +D["\1"]=" \3"/p +s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2"/p +d +:bsnl +s/["\\]/\\&/g +s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ +D["\1"]=" \3\\\\\\n"\\/p +t cont +s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p +t cont +d +:cont +n +s/.\{148\}/&'"$ac_delim"'/g +t clear +:clear +s/\\$// +t bsnlc +s/["\\]/\\&/g; s/^/"/; s/$/"/p +d +:bsnlc +s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p +b cont +' >$CONFIG_STATUS || ac_write_fail=1 + +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 + for (key in D) D_is_set[key] = 1 + FS = "" +} +/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ { + line = \$ 0 + split(line, arg, " ") + if (arg[1] == "#") { + defundef = arg[2] + mac1 = arg[3] + } else { + defundef = substr(arg[1], 2) + mac1 = arg[2] + } + split(mac1, mac2, "(") #) + macro = mac2[1] + prefix = substr(line, 1, index(line, defundef) - 1) + if (D_is_set[macro]) { + # Preserve the white space surrounding the "#". + print prefix "define", macro P[macro] D[macro] + next + } else { + # Replace #undef with comments. This is necessary, for example, + # in the case of _POSIX_SOURCE, which is predefined and required + # on some systems where configure will not decide to define it. + if (defundef == "undef") { + print "/*", prefix defundef, macro, "*/" + next + } + } +} +{ print } +_ACAWK +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 + as_fn_error $? "could not setup config headers machinery" "$LINENO" 5 +fi # test -n "$CONFIG_HEADERS" + + +eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS" +shift +for ac_tag +do + case $ac_tag in + :[FHLC]) ac_mode=$ac_tag; continue;; + esac + case $ac_mode$ac_tag in + :[FHL]*:*);; + :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;; + :[FH]-) ac_tag=-:-;; + :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; + esac + ac_save_IFS=$IFS + IFS=: + set x $ac_tag + IFS=$ac_save_IFS + shift + ac_file=$1 + shift + + case $ac_mode in + :L) ac_source=$1;; + :[FH]) + ac_file_inputs= + for ac_f + do + case $ac_f in + -) ac_f="$ac_tmp/stdin";; + *) # Look for the file first in the build tree, then in the source tree + # (if the path is not absolute). The absolute path cannot be DOS-style, + # because $ac_f cannot contain `:'. + test -f "$ac_f" || + case $ac_f in + [\\/$]*) false;; + *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; + esac || + as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;; + esac + case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac + as_fn_append ac_file_inputs " '$ac_f'" + done + + # Let's still pretend it is `configure' which instantiates (i.e., don't + # use $as_me), people would be surprised to read: + # /* config.h. Generated by config.status. */ + configure_input='Generated from '` + $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g' + `' by configure.' + if test x"$ac_file" != x-; then + configure_input="$ac_file. $configure_input" + { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5 +$as_echo "$as_me: creating $ac_file" >&6;} + fi + # Neutralize special characters interpreted by sed in replacement strings. + case $configure_input in #( + *\&* | *\|* | *\\* ) + ac_sed_conf_input=`$as_echo "$configure_input" | + sed 's/[\\\\&|]/\\\\&/g'`;; #( + *) ac_sed_conf_input=$configure_input;; + esac + + case $ac_tag in + *:-:* | *:-) cat >"$ac_tmp/stdin" \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; + esac + ;; + esac + + ac_dir=`$as_dirname -- "$ac_file" || +$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$ac_file" : 'X\(//\)[^/]' \| \ + X"$ac_file" : 'X\(//\)$' \| \ + X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$ac_file" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + as_dir="$ac_dir"; as_fn_mkdir_p + ac_builddir=. + +case "$ac_dir" in +.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; +*) + ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` + # A ".." for each directory in $ac_dir_suffix. + ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` + case $ac_top_builddir_sub in + "") ac_top_builddir_sub=. ac_top_build_prefix= ;; + *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; + esac ;; +esac +ac_abs_top_builddir=$ac_pwd +ac_abs_builddir=$ac_pwd$ac_dir_suffix +# for backward compatibility: +ac_top_builddir=$ac_top_build_prefix + +case $srcdir in + .) # We are building in place. + ac_srcdir=. + ac_top_srcdir=$ac_top_builddir_sub + ac_abs_top_srcdir=$ac_pwd ;; + [\\/]* | ?:[\\/]* ) # Absolute name. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir + ac_abs_top_srcdir=$srcdir ;; + *) # Relative name. + ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_build_prefix$srcdir + ac_abs_top_srcdir=$ac_pwd/$srcdir ;; +esac +ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix + + + case $ac_mode in + :F) + # + # CONFIG_FILE + # + + case $INSTALL in + [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; + *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; + esac + ac_MKDIR_P=$MKDIR_P + case $MKDIR_P in + [\\/$]* | ?:[\\/]* ) ;; + */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;; + esac +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +# If the template does not know about datarootdir, expand it. +# FIXME: This hack should be removed a few years after 2.60. +ac_datarootdir_hack=; ac_datarootdir_seen= +ac_sed_dataroot=' +/datarootdir/ { + p + q +} +/@datadir@/p +/@docdir@/p +/@infodir@/p +/@localedir@/p +/@mandir@/p' +case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in +*datarootdir*) ac_datarootdir_seen=yes;; +*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 +$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 + ac_datarootdir_hack=' + s&@datadir@&$datadir&g + s&@docdir@&$docdir&g + s&@infodir@&$infodir&g + s&@localedir@&$localedir&g + s&@mandir@&$mandir&g + s&\\\${datarootdir}&$datarootdir&g' ;; +esac +_ACEOF + +# Neutralize VPATH when `$srcdir' = `.'. +# Shell code in configure.ac might set extrasub. +# FIXME: do we really want to maintain this feature? +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +ac_sed_extra="$ac_vpsub +$extrasub +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +:t +/@[a-zA-Z_][a-zA-Z_0-9]*@/!b +s|@configure_input@|$ac_sed_conf_input|;t t +s&@top_builddir@&$ac_top_builddir_sub&;t t +s&@top_build_prefix@&$ac_top_build_prefix&;t t +s&@srcdir@&$ac_srcdir&;t t +s&@abs_srcdir@&$ac_abs_srcdir&;t t +s&@top_srcdir@&$ac_top_srcdir&;t t +s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t +s&@builddir@&$ac_builddir&;t t +s&@abs_builddir@&$ac_abs_builddir&;t t +s&@abs_top_builddir@&$ac_abs_top_builddir&;t t +s&@INSTALL@&$ac_INSTALL&;t t +s&@MKDIR_P@&$ac_MKDIR_P&;t t +$ac_datarootdir_hack +" +eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \ + >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + +test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && + { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } && + { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \ + "$ac_tmp/out"`; test -z "$ac_out"; } && + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir' +which seems to be undefined. Please make sure it is defined" >&5 +$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' +which seems to be undefined. Please make sure it is defined" >&2;} + + rm -f "$ac_tmp/stdin" + case $ac_file in + -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";; + *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";; + esac \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + ;; + :H) + # + # CONFIG_HEADER + # + if test x"$ac_file" != x-; then + { + $as_echo "/* $configure_input */" \ + && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" + } >"$ac_tmp/config.h" \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then + { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5 +$as_echo "$as_me: $ac_file is unchanged" >&6;} + else + rm -f "$ac_file" + mv "$ac_tmp/config.h" "$ac_file" \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + fi + else + $as_echo "/* $configure_input */" \ + && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \ + || as_fn_error $? "could not create -" "$LINENO" 5 + fi +# Compute "$ac_file"'s index in $config_headers. +_am_arg="$ac_file" +_am_stamp_count=1 +for _am_header in $config_headers :; do + case $_am_header in + $_am_arg | $_am_arg:* ) + break ;; + * ) + _am_stamp_count=`expr $_am_stamp_count + 1` ;; + esac +done +echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" || +$as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$_am_arg" : 'X\(//\)[^/]' \| \ + X"$_am_arg" : 'X\(//\)$' \| \ + X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$_am_arg" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'`/stamp-h$_am_stamp_count + ;; + + :C) { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5 +$as_echo "$as_me: executing $ac_file commands" >&6;} + ;; + esac + + + case $ac_file$ac_mode in + "depfiles":C) test x"$AMDEP_TRUE" != x"" || { + # Autoconf 2.62 quotes --file arguments for eval, but not when files + # are listed without --file. Let's play safe and only enable the eval + # if we detect the quoting. + case $CONFIG_FILES in + *\'*) eval set x "$CONFIG_FILES" ;; + *) set x $CONFIG_FILES ;; + esac + shift + for mf + do + # Strip MF so we end up with the name of the file. + mf=`echo "$mf" | sed -e 's/:.*$//'` + # Check whether this is an Automake generated Makefile or not. + # We used to match only the files named `Makefile.in', but + # some people rename them; so instead we look at the file content. + # Grep'ing the first line is not enough: some people post-process + # each Makefile.in and add a new line on top of each file to say so. + # Grep'ing the whole file is not good either: AIX grep has a line + # limit of 2048, but all sed's we know have understand at least 4000. + if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then + dirpart=`$as_dirname -- "$mf" || +$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$mf" : 'X\(//\)[^/]' \| \ + X"$mf" : 'X\(//\)$' \| \ + X"$mf" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$mf" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + else + continue + fi + # Extract the definition of DEPDIR, am__include, and am__quote + # from the Makefile without running `make'. + DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` + test -z "$DEPDIR" && continue + am__include=`sed -n 's/^am__include = //p' < "$mf"` + test -z "am__include" && continue + am__quote=`sed -n 's/^am__quote = //p' < "$mf"` + # When using ansi2knr, U may be empty or an underscore; expand it + U=`sed -n 's/^U = //p' < "$mf"` + # Find all dependency output files, they are included files with + # $(DEPDIR) in their names. We invoke sed twice because it is the + # simplest approach to changing $(DEPDIR) to its actual value in the + # expansion. + for file in `sed -n " + s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ + sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do + # Make sure the directory exists. + test -f "$dirpart/$file" && continue + fdir=`$as_dirname -- "$file" || +$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$file" : 'X\(//\)[^/]' \| \ + X"$file" : 'X\(//\)$' \| \ + X"$file" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$file" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + as_dir=$dirpart/$fdir; as_fn_mkdir_p + # echo "creating $dirpart/$file" + echo '# dummy' > "$dirpart/$file" + done + done +} + ;; + "libtool":C) + + # See if we are running on zsh, and set the options which allow our + # commands through without removal of \ escapes. + if test -n "${ZSH_VERSION+set}" ; then + setopt NO_GLOB_SUBST + fi + + cfgfile="${ofile}T" + trap "$RM \"$cfgfile\"; exit 1" 1 2 15 + $RM "$cfgfile" + + cat <<_LT_EOF >> "$cfgfile" +#! $SHELL + +# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. +# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION +# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: +# NOTE: Changes made to this file will be lost: look at ltmain.sh. +# +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, +# 2006, 2007, 2008, 2009, 2010 Free Software Foundation, +# Inc. +# Written by Gordon Matzigkeit, 1996 +# +# This file is part of GNU Libtool. +# +# GNU Libtool is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# As a special exception to the GNU General Public License, +# if you distribute this file as part of a program or library that +# is built using GNU Libtool, you may include this file under the +# same distribution terms that you use for the rest of that program. +# +# GNU Libtool is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with GNU Libtool; see the file COPYING. If not, a copy +# can be downloaded from http://www.gnu.org/licenses/gpl.html, or +# obtained by writing to the Free Software Foundation, Inc., +# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + + +# The names of the tagged configurations supported by this script. +available_tags="CXX " + +# ### BEGIN LIBTOOL CONFIG + +# Which release of libtool.m4 was used? +macro_version=$macro_version +macro_revision=$macro_revision + +# Whether or not to build shared libraries. +build_libtool_libs=$enable_shared + +# Whether or not to build static libraries. +build_old_libs=$enable_static + +# What type of objects to build. +pic_mode=$pic_mode + +# Whether or not to optimize for fast installation. +fast_install=$enable_fast_install + +# Shell to use when invoking shell scripts. +SHELL=$lt_SHELL + +# An echo program that protects backslashes. +ECHO=$lt_ECHO + +# The host system. +host_alias=$host_alias +host=$host +host_os=$host_os + +# The build system. +build_alias=$build_alias +build=$build +build_os=$build_os + +# A sed program that does not truncate output. +SED=$lt_SED + +# Sed that helps us avoid accidentally triggering echo(1) options like -n. +Xsed="\$SED -e 1s/^X//" + +# A grep program that handles long lines. +GREP=$lt_GREP + +# An ERE matcher. +EGREP=$lt_EGREP + +# A literal string matcher. +FGREP=$lt_FGREP + +# A BSD- or MS-compatible name lister. +NM=$lt_NM + +# Whether we need soft or hard links. +LN_S=$lt_LN_S + +# What is the maximum length of a command? +max_cmd_len=$max_cmd_len + +# Object file suffix (normally "o"). +objext=$ac_objext + +# Executable file suffix (normally ""). +exeext=$exeext + +# whether the shell understands "unset". +lt_unset=$lt_unset + +# turn spaces into newlines. +SP2NL=$lt_lt_SP2NL + +# turn newlines into spaces. +NL2SP=$lt_lt_NL2SP + +# convert \$build file names to \$host format. +to_host_file_cmd=$lt_cv_to_host_file_cmd + +# convert \$build files to toolchain format. +to_tool_file_cmd=$lt_cv_to_tool_file_cmd + +# An object symbol dumper. +OBJDUMP=$lt_OBJDUMP + +# Method to check whether dependent libraries are shared objects. +deplibs_check_method=$lt_deplibs_check_method + +# Command to use when deplibs_check_method = "file_magic". +file_magic_cmd=$lt_file_magic_cmd + +# How to find potential files when deplibs_check_method = "file_magic". +file_magic_glob=$lt_file_magic_glob + +# Find potential files using nocaseglob when deplibs_check_method = "file_magic". +want_nocaseglob=$lt_want_nocaseglob + +# DLL creation program. +DLLTOOL=$lt_DLLTOOL + +# Command to associate shared and link libraries. +sharedlib_from_linklib_cmd=$lt_sharedlib_from_linklib_cmd + +# The archiver. +AR=$lt_AR + +# Flags to create an archive. +AR_FLAGS=$lt_AR_FLAGS + +# How to feed a file listing to the archiver. +archiver_list_spec=$lt_archiver_list_spec + +# A symbol stripping program. +STRIP=$lt_STRIP + +# Commands used to install an old-style archive. +RANLIB=$lt_RANLIB +old_postinstall_cmds=$lt_old_postinstall_cmds +old_postuninstall_cmds=$lt_old_postuninstall_cmds + +# Whether to use a lock for old archive extraction. +lock_old_archive_extraction=$lock_old_archive_extraction + +# A C compiler. +LTCC=$lt_CC + +# LTCC compiler flags. +LTCFLAGS=$lt_CFLAGS + +# Take the output of nm and produce a listing of raw symbols and C names. +global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe + +# Transform the output of nm in a proper C declaration. +global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl + +# Transform the output of nm in a C name address pair. +global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address + +# Transform the output of nm in a C name address pair when lib prefix is needed. +global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix + +# Specify filename containing input files for \$NM. +nm_file_list_spec=$lt_nm_file_list_spec + +# The root where to search for dependent libraries,and in which our libraries should be installed. +lt_sysroot=$lt_sysroot + +# The name of the directory that contains temporary libtool files. +objdir=$objdir + +# Used to examine libraries when file_magic_cmd begins with "file". +MAGIC_CMD=$MAGIC_CMD + +# Must we lock files when doing compilation? +need_locks=$lt_need_locks + +# Manifest tool. +MANIFEST_TOOL=$lt_MANIFEST_TOOL + +# Tool to manipulate archived DWARF debug symbol files on Mac OS X. +DSYMUTIL=$lt_DSYMUTIL + +# Tool to change global to local symbols on Mac OS X. +NMEDIT=$lt_NMEDIT + +# Tool to manipulate fat objects and archives on Mac OS X. +LIPO=$lt_LIPO + +# ldd/readelf like tool for Mach-O binaries on Mac OS X. +OTOOL=$lt_OTOOL + +# ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4. +OTOOL64=$lt_OTOOL64 + +# Old archive suffix (normally "a"). +libext=$libext + +# Shared library suffix (normally ".so"). +shrext_cmds=$lt_shrext_cmds + +# The commands to extract the exported symbol list from a shared archive. +extract_expsyms_cmds=$lt_extract_expsyms_cmds + +# Variables whose values should be saved in libtool wrapper scripts and +# restored at link time. +variables_saved_for_relink=$lt_variables_saved_for_relink + +# Do we need the "lib" prefix for modules? +need_lib_prefix=$need_lib_prefix + +# Do we need a version for libraries? +need_version=$need_version + +# Library versioning type. +version_type=$version_type + +# Shared library runtime path variable. +runpath_var=$runpath_var + +# Shared library path variable. +shlibpath_var=$shlibpath_var + +# Is shlibpath searched before the hard-coded library search path? +shlibpath_overrides_runpath=$shlibpath_overrides_runpath + +# Format of library name prefix. +libname_spec=$lt_libname_spec + +# List of archive names. First name is the real one, the rest are links. +# The last name is the one that the linker finds with -lNAME +library_names_spec=$lt_library_names_spec + +# The coded name of the library, if different from the real name. +soname_spec=$lt_soname_spec + +# Permission mode override for installation of shared libraries. +install_override_mode=$lt_install_override_mode + +# Command to use after installation of a shared archive. +postinstall_cmds=$lt_postinstall_cmds + +# Command to use after uninstallation of a shared archive. +postuninstall_cmds=$lt_postuninstall_cmds + +# Commands used to finish a libtool library installation in a directory. +finish_cmds=$lt_finish_cmds + +# As "finish_cmds", except a single script fragment to be evaled but +# not shown. +finish_eval=$lt_finish_eval + +# Whether we should hardcode library paths into libraries. +hardcode_into_libs=$hardcode_into_libs + +# Compile-time system search path for libraries. +sys_lib_search_path_spec=$lt_sys_lib_search_path_spec + +# Run-time system search path for libraries. +sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec + +# Whether dlopen is supported. +dlopen_support=$enable_dlopen + +# Whether dlopen of programs is supported. +dlopen_self=$enable_dlopen_self + +# Whether dlopen of statically linked programs is supported. +dlopen_self_static=$enable_dlopen_self_static + +# Commands to strip libraries. +old_striplib=$lt_old_striplib +striplib=$lt_striplib + + +# The linker used to build libraries. +LD=$lt_LD + +# How to create reloadable object files. +reload_flag=$lt_reload_flag +reload_cmds=$lt_reload_cmds + +# Commands used to build an old-style archive. +old_archive_cmds=$lt_old_archive_cmds + +# A language specific compiler. +CC=$lt_compiler + +# Is the compiler the GNU compiler? +with_gcc=$GCC + +# Compiler flag to turn off builtin functions. +no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag + +# Additional compiler flags for building library objects. +pic_flag=$lt_lt_prog_compiler_pic + +# How to pass a linker flag through the compiler. +wl=$lt_lt_prog_compiler_wl + +# Compiler flag to prevent dynamic linking. +link_static_flag=$lt_lt_prog_compiler_static + +# Does compiler simultaneously support -c and -o options? +compiler_c_o=$lt_lt_cv_prog_compiler_c_o + +# Whether or not to add -lc for building shared libraries. +build_libtool_need_lc=$archive_cmds_need_lc + +# Whether or not to disallow shared libs when runtime libs are static. +allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes + +# Compiler flag to allow reflexive dlopens. +export_dynamic_flag_spec=$lt_export_dynamic_flag_spec + +# Compiler flag to generate shared objects directly from archives. +whole_archive_flag_spec=$lt_whole_archive_flag_spec + +# Whether the compiler copes with passing no objects directly. +compiler_needs_object=$lt_compiler_needs_object + +# Create an old-style archive from a shared archive. +old_archive_from_new_cmds=$lt_old_archive_from_new_cmds + +# Create a temporary old-style archive to link instead of a shared archive. +old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds + +# Commands used to build a shared archive. +archive_cmds=$lt_archive_cmds +archive_expsym_cmds=$lt_archive_expsym_cmds + +# Commands used to build a loadable module if different from building +# a shared archive. +module_cmds=$lt_module_cmds +module_expsym_cmds=$lt_module_expsym_cmds + +# Whether we are building with GNU ld or not. +with_gnu_ld=$lt_with_gnu_ld + +# Flag that allows shared libraries with undefined symbols to be built. +allow_undefined_flag=$lt_allow_undefined_flag + +# Flag that enforces no undefined symbols. +no_undefined_flag=$lt_no_undefined_flag + +# Flag to hardcode \$libdir into a binary during linking. +# This must work even if \$libdir does not exist +hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec + +# If ld is used when linking, flag to hardcode \$libdir into a binary +# during linking. This must work even if \$libdir does not exist. +hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld + +# Whether we need a single "-rpath" flag with a separated argument. +hardcode_libdir_separator=$lt_hardcode_libdir_separator + +# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes +# DIR into the resulting binary. +hardcode_direct=$hardcode_direct + +# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes +# DIR into the resulting binary and the resulting library dependency is +# "absolute",i.e impossible to change by setting \${shlibpath_var} if the +# library is relocated. +hardcode_direct_absolute=$hardcode_direct_absolute + +# Set to "yes" if using the -LDIR flag during linking hardcodes DIR +# into the resulting binary. +hardcode_minus_L=$hardcode_minus_L + +# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR +# into the resulting binary. +hardcode_shlibpath_var=$hardcode_shlibpath_var + +# Set to "yes" if building a shared library automatically hardcodes DIR +# into the library and all subsequent libraries and executables linked +# against it. +hardcode_automatic=$hardcode_automatic + +# Set to yes if linker adds runtime paths of dependent libraries +# to runtime path list. +inherit_rpath=$inherit_rpath + +# Whether libtool must link a program against all its dependency libraries. +link_all_deplibs=$link_all_deplibs + +# Set to "yes" if exported symbols are required. +always_export_symbols=$always_export_symbols + +# The commands to list exported symbols. +export_symbols_cmds=$lt_export_symbols_cmds + +# Symbols that should not be listed in the preloaded symbols. +exclude_expsyms=$lt_exclude_expsyms + +# Symbols that must always be exported. +include_expsyms=$lt_include_expsyms + +# Commands necessary for linking programs (against libraries) with templates. +prelink_cmds=$lt_prelink_cmds + +# Commands necessary for finishing linking programs. +postlink_cmds=$lt_postlink_cmds + +# Specify filename containing input files. +file_list_spec=$lt_file_list_spec + +# How to hardcode a shared library path into an executable. +hardcode_action=$hardcode_action + +# The directories searched by this compiler when creating a shared library. +compiler_lib_search_dirs=$lt_compiler_lib_search_dirs + +# Dependencies to place before and after the objects being linked to +# create a shared library. +predep_objects=$lt_predep_objects +postdep_objects=$lt_postdep_objects +predeps=$lt_predeps +postdeps=$lt_postdeps + +# The library search path used internally by the compiler when linking +# a shared library. +compiler_lib_search_path=$lt_compiler_lib_search_path + +# ### END LIBTOOL CONFIG + +_LT_EOF + + case $host_os in + aix3*) + cat <<\_LT_EOF >> "$cfgfile" +# AIX sometimes has problems with the GCC collect2 program. For some +# reason, if we set the COLLECT_NAMES environment variable, the problems +# vanish in a puff of smoke. +if test "X${COLLECT_NAMES+set}" != Xset; then + COLLECT_NAMES= + export COLLECT_NAMES +fi +_LT_EOF + ;; + esac + + +ltmain="$ac_aux_dir/ltmain.sh" + + + # We use sed instead of cat because bash on DJGPP gets confused if + # if finds mixed CR/LF and LF-only lines. Since sed operates in + # text mode, it properly converts lines to CR/LF. This bash problem + # is reportedly fixed, but why not run on old versions too? + sed '$q' "$ltmain" >> "$cfgfile" \ + || (rm -f "$cfgfile"; exit 1) + + if test x"$xsi_shell" = xyes; then + sed -e '/^func_dirname ()$/,/^} # func_dirname /c\ +func_dirname ()\ +{\ +\ case ${1} in\ +\ */*) func_dirname_result="${1%/*}${2}" ;;\ +\ * ) func_dirname_result="${3}" ;;\ +\ esac\ +} # Extended-shell func_dirname implementation' "$cfgfile" > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") +test 0 -eq $? || _lt_function_replace_fail=: + + + sed -e '/^func_basename ()$/,/^} # func_basename /c\ +func_basename ()\ +{\ +\ func_basename_result="${1##*/}"\ +} # Extended-shell func_basename implementation' "$cfgfile" > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") +test 0 -eq $? || _lt_function_replace_fail=: + + + sed -e '/^func_dirname_and_basename ()$/,/^} # func_dirname_and_basename /c\ +func_dirname_and_basename ()\ +{\ +\ case ${1} in\ +\ */*) func_dirname_result="${1%/*}${2}" ;;\ +\ * ) func_dirname_result="${3}" ;;\ +\ esac\ +\ func_basename_result="${1##*/}"\ +} # Extended-shell func_dirname_and_basename implementation' "$cfgfile" > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") +test 0 -eq $? || _lt_function_replace_fail=: + + + sed -e '/^func_stripname ()$/,/^} # func_stripname /c\ +func_stripname ()\ +{\ +\ # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are\ +\ # positional parameters, so assign one to ordinary parameter first.\ +\ func_stripname_result=${3}\ +\ func_stripname_result=${func_stripname_result#"${1}"}\ +\ func_stripname_result=${func_stripname_result%"${2}"}\ +} # Extended-shell func_stripname implementation' "$cfgfile" > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") +test 0 -eq $? || _lt_function_replace_fail=: + + + sed -e '/^func_split_long_opt ()$/,/^} # func_split_long_opt /c\ +func_split_long_opt ()\ +{\ +\ func_split_long_opt_name=${1%%=*}\ +\ func_split_long_opt_arg=${1#*=}\ +} # Extended-shell func_split_long_opt implementation' "$cfgfile" > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") +test 0 -eq $? || _lt_function_replace_fail=: + + + sed -e '/^func_split_short_opt ()$/,/^} # func_split_short_opt /c\ +func_split_short_opt ()\ +{\ +\ func_split_short_opt_arg=${1#??}\ +\ func_split_short_opt_name=${1%"$func_split_short_opt_arg"}\ +} # Extended-shell func_split_short_opt implementation' "$cfgfile" > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") +test 0 -eq $? || _lt_function_replace_fail=: + + + sed -e '/^func_lo2o ()$/,/^} # func_lo2o /c\ +func_lo2o ()\ +{\ +\ case ${1} in\ +\ *.lo) func_lo2o_result=${1%.lo}.${objext} ;;\ +\ *) func_lo2o_result=${1} ;;\ +\ esac\ +} # Extended-shell func_lo2o implementation' "$cfgfile" > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") +test 0 -eq $? || _lt_function_replace_fail=: + + + sed -e '/^func_xform ()$/,/^} # func_xform /c\ +func_xform ()\ +{\ + func_xform_result=${1%.*}.lo\ +} # Extended-shell func_xform implementation' "$cfgfile" > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") +test 0 -eq $? || _lt_function_replace_fail=: + + + sed -e '/^func_arith ()$/,/^} # func_arith /c\ +func_arith ()\ +{\ + func_arith_result=$(( $* ))\ +} # Extended-shell func_arith implementation' "$cfgfile" > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") +test 0 -eq $? || _lt_function_replace_fail=: + + + sed -e '/^func_len ()$/,/^} # func_len /c\ +func_len ()\ +{\ + func_len_result=${#1}\ +} # Extended-shell func_len implementation' "$cfgfile" > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") +test 0 -eq $? || _lt_function_replace_fail=: + +fi + +if test x"$lt_shell_append" = xyes; then + sed -e '/^func_append ()$/,/^} # func_append /c\ +func_append ()\ +{\ + eval "${1}+=\\${2}"\ +} # Extended-shell func_append implementation' "$cfgfile" > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") +test 0 -eq $? || _lt_function_replace_fail=: + + + sed -e '/^func_append_quoted ()$/,/^} # func_append_quoted /c\ +func_append_quoted ()\ +{\ +\ func_quote_for_eval "${2}"\ +\ eval "${1}+=\\\\ \\$func_quote_for_eval_result"\ +} # Extended-shell func_append_quoted implementation' "$cfgfile" > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") +test 0 -eq $? || _lt_function_replace_fail=: + + + # Save a `func_append' function call where possible by direct use of '+=' + sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") + test 0 -eq $? || _lt_function_replace_fail=: +else + # Save a `func_append' function call even when '+=' is not available + sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") + test 0 -eq $? || _lt_function_replace_fail=: +fi + +if test x"$_lt_function_replace_fail" = x":"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Unable to substitute extended shell functions in $ofile" >&5 +$as_echo "$as_me: WARNING: Unable to substitute extended shell functions in $ofile" >&2;} +fi + + + mv -f "$cfgfile" "$ofile" || + (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") + chmod +x "$ofile" + + + cat <<_LT_EOF >> "$ofile" + +# ### BEGIN LIBTOOL TAG CONFIG: CXX + +# The linker used to build libraries. +LD=$lt_LD_CXX + +# How to create reloadable object files. +reload_flag=$lt_reload_flag_CXX +reload_cmds=$lt_reload_cmds_CXX + +# Commands used to build an old-style archive. +old_archive_cmds=$lt_old_archive_cmds_CXX + +# A language specific compiler. +CC=$lt_compiler_CXX + +# Is the compiler the GNU compiler? +with_gcc=$GCC_CXX + +# Compiler flag to turn off builtin functions. +no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_CXX + +# Additional compiler flags for building library objects. +pic_flag=$lt_lt_prog_compiler_pic_CXX + +# How to pass a linker flag through the compiler. +wl=$lt_lt_prog_compiler_wl_CXX + +# Compiler flag to prevent dynamic linking. +link_static_flag=$lt_lt_prog_compiler_static_CXX + +# Does compiler simultaneously support -c and -o options? +compiler_c_o=$lt_lt_cv_prog_compiler_c_o_CXX + +# Whether or not to add -lc for building shared libraries. +build_libtool_need_lc=$archive_cmds_need_lc_CXX + +# Whether or not to disallow shared libs when runtime libs are static. +allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_CXX + +# Compiler flag to allow reflexive dlopens. +export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_CXX + +# Compiler flag to generate shared objects directly from archives. +whole_archive_flag_spec=$lt_whole_archive_flag_spec_CXX + +# Whether the compiler copes with passing no objects directly. +compiler_needs_object=$lt_compiler_needs_object_CXX + +# Create an old-style archive from a shared archive. +old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_CXX + +# Create a temporary old-style archive to link instead of a shared archive. +old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_CXX + +# Commands used to build a shared archive. +archive_cmds=$lt_archive_cmds_CXX +archive_expsym_cmds=$lt_archive_expsym_cmds_CXX + +# Commands used to build a loadable module if different from building +# a shared archive. +module_cmds=$lt_module_cmds_CXX +module_expsym_cmds=$lt_module_expsym_cmds_CXX + +# Whether we are building with GNU ld or not. +with_gnu_ld=$lt_with_gnu_ld_CXX + +# Flag that allows shared libraries with undefined symbols to be built. +allow_undefined_flag=$lt_allow_undefined_flag_CXX + +# Flag that enforces no undefined symbols. +no_undefined_flag=$lt_no_undefined_flag_CXX + +# Flag to hardcode \$libdir into a binary during linking. +# This must work even if \$libdir does not exist +hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_CXX + +# If ld is used when linking, flag to hardcode \$libdir into a binary +# during linking. This must work even if \$libdir does not exist. +hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_CXX + +# Whether we need a single "-rpath" flag with a separated argument. +hardcode_libdir_separator=$lt_hardcode_libdir_separator_CXX + +# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes +# DIR into the resulting binary. +hardcode_direct=$hardcode_direct_CXX + +# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes +# DIR into the resulting binary and the resulting library dependency is +# "absolute",i.e impossible to change by setting \${shlibpath_var} if the +# library is relocated. +hardcode_direct_absolute=$hardcode_direct_absolute_CXX + +# Set to "yes" if using the -LDIR flag during linking hardcodes DIR +# into the resulting binary. +hardcode_minus_L=$hardcode_minus_L_CXX + +# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR +# into the resulting binary. +hardcode_shlibpath_var=$hardcode_shlibpath_var_CXX + +# Set to "yes" if building a shared library automatically hardcodes DIR +# into the library and all subsequent libraries and executables linked +# against it. +hardcode_automatic=$hardcode_automatic_CXX + +# Set to yes if linker adds runtime paths of dependent libraries +# to runtime path list. +inherit_rpath=$inherit_rpath_CXX + +# Whether libtool must link a program against all its dependency libraries. +link_all_deplibs=$link_all_deplibs_CXX + +# Set to "yes" if exported symbols are required. +always_export_symbols=$always_export_symbols_CXX + +# The commands to list exported symbols. +export_symbols_cmds=$lt_export_symbols_cmds_CXX + +# Symbols that should not be listed in the preloaded symbols. +exclude_expsyms=$lt_exclude_expsyms_CXX + +# Symbols that must always be exported. +include_expsyms=$lt_include_expsyms_CXX + +# Commands necessary for linking programs (against libraries) with templates. +prelink_cmds=$lt_prelink_cmds_CXX + +# Commands necessary for finishing linking programs. +postlink_cmds=$lt_postlink_cmds_CXX + +# Specify filename containing input files. +file_list_spec=$lt_file_list_spec_CXX + +# How to hardcode a shared library path into an executable. +hardcode_action=$hardcode_action_CXX + +# The directories searched by this compiler when creating a shared library. +compiler_lib_search_dirs=$lt_compiler_lib_search_dirs_CXX + +# Dependencies to place before and after the objects being linked to +# create a shared library. +predep_objects=$lt_predep_objects_CXX +postdep_objects=$lt_postdep_objects_CXX +predeps=$lt_predeps_CXX +postdeps=$lt_postdeps_CXX + +# The library search path used internally by the compiler when linking +# a shared library. +compiler_lib_search_path=$lt_compiler_lib_search_path_CXX + +# ### END LIBTOOL TAG CONFIG: CXX +_LT_EOF + + ;; + + esac +done # for ac_tag + + +as_fn_exit 0 +_ACEOF +ac_clean_files=$ac_clean_files_save + +test $ac_write_fail = 0 || + as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5 + + +# configure is writing to config.log, and then calls config.status. +# config.status does its own redirection, appending to config.log. +# Unfortunately, on DOS this fails, as config.log is still kept open +# by configure, so config.status won't be able to write to it; its +# output is simply discarded. So we exec the FD to /dev/null, +# effectively closing config.log, so it can be properly (re)opened and +# appended to by config.status. When coming back to configure, we +# need to make the FD available again. +if test "$no_create" != yes; then + ac_cs_success=: + ac_config_status_args= + test "$silent" = yes && + ac_config_status_args="$ac_config_status_args --quiet" + exec 5>/dev/null + $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false + exec 5>>config.log + # Use ||, not &&, to avoid exiting from the if with $? = 1, which + # would make configure fail if this is the last instruction. + $ac_cs_success || as_fn_exit 1 +fi +if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5 +$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;} +fi + + diff --git a/software/scsi2sd-util/libzipper-1.0.3/configure.ac b/software/scsi2sd-util/libzipper-1.0.3/configure.ac new file mode 100644 index 0000000..1ed643a --- /dev/null +++ b/software/scsi2sd-util/libzipper-1.0.3/configure.ac @@ -0,0 +1,53 @@ +# Copyright (C) 2011 Michael McMaster +# +# This file is part of libzipper. +# +# libzipper is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# libzipper is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with libzipper. If not, see . + +AC_INIT([libzipper], m4_esyscmd_s([cat VERSION]), [michael@codesrc.com]) +AC_CANONICAL_HOST +AC_CANONICAL_TARGET +AM_INIT_AUTOMAKE([foreign]) +AC_CONFIG_HEADERS([autoconfig.h]) +AC_CONFIG_FILES([Makefile Doxyfile libzipper1.pc zipper.1]) + +AM_MAINTAINER_MODE + +AC_SUBST([libzipper_version], m4_esyscmd_s([cat VERSION])) + +AC_PROG_CXX +AC_LANG([C++]) +AM_PROG_LIBTOOL + +AC_FUNC_STRERROR_R +AM_CONDITIONAL(HAVE_GNU_STRERROR,[test x$ac_cv_func_strerror_r_char_p = xyes]) + +DX_DOXYGEN_FEATURE([ON]) +DX_HTML_FEATURE([ON]) +DX_CHM_FEATURE(OFF) +DX_CHI_FEATURE(OFF) +DX_MAN_FEATURE(OFF) +DX_RTF_FEATURE(OFF) +DX_XML_FEATURE(OFF) +DX_PDF_FEATURE(OFF) +DX_PS_FEATURE(OFF) + +DX_INIT_DOXYGEN([libzipper], [Doxyfile], [doc]) + +PKG_CHECK_MODULES([ZLIB], [zlib >= 1.2.3],, + AC_MSG_ERROR([zlib 1.2.3 or newer not found.]) +) + +AC_OUTPUT + diff --git a/software/scsi2sd-util/libzipper-1.0.3/deflate.cc b/software/scsi2sd-util/libzipper-1.0.3/deflate.cc new file mode 100644 index 0000000..986f6d1 --- /dev/null +++ b/software/scsi2sd-util/libzipper-1.0.3/deflate.cc @@ -0,0 +1,213 @@ +// Copyright (C) 2011 Michael McMaster +// +// This file is part of libzipper. +// +// libzipper is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// libzipper is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with libzipper. If not, see . + +#include "zipper.hh" +#include "deflate.hh" +#include "util.hh" + +#include + +#include +#include + +using namespace zipper; + +namespace +{ + struct DeflateDeleter + { + public: + DeflateDeleter(z_stream* stream) : m_stream(stream) {} + ~DeflateDeleter() + { + deflateEnd(m_stream); + + } + private: + z_stream* m_stream; + }; + + struct InflateDeleter + { + public: + InflateDeleter(z_stream* stream) : m_stream(stream) {} + ~InflateDeleter() + { + inflateEnd(m_stream); + + } + private: + z_stream* m_stream; + }; + + enum Constants + { + ChunkSize = 64*1024, + WindowBits = 15 + }; +} + +void +zipper::deflate( + const Reader& reader, + const WriterPtr& writer, + zsize_t& writeOffset, + zsize_t& uncompressedSize, + zsize_t& compressedSize, + uint32_t& crc) +{ + uint8_t inChunk[ChunkSize]; + uint8_t outChunk[ChunkSize]; + + uncompressedSize = 0; + compressedSize = 0; + + z_stream stream; + stream.zalloc = NULL; + stream.zfree = NULL; + stream.opaque = NULL; + int zlibErr( + deflateInit2( + &stream, + Z_DEFAULT_COMPRESSION, + Z_DEFLATED, + -WindowBits, + MAX_MEM_LEVEL, + Z_DEFAULT_STRATEGY) + ); + + assert(zlibErr == Z_OK); + DeflateDeleter deleter(&stream); + stream.next_in = NULL; + stream.avail_in = 0; + bool finished(false); + + zsize_t pos(0); + zsize_t end(reader.getSize()); + crc = crc32(0, NULL, 0); + + while (!finished) + { + if ((stream.avail_in == 0) && (pos < end)) + { + stream.avail_in = + std::min(zsize_t(ChunkSize), end - pos); + reader.readData( + pos, stream.avail_in, &inChunk[0]); + stream.next_in = reinterpret_cast(&inChunk); + pos += stream.avail_in; + uncompressedSize += stream.avail_in; + crc = crc32(crc, stream.next_in, stream.avail_in); + } + + stream.next_out = reinterpret_cast(&outChunk); + stream.avail_out = sizeof(outChunk); + + finished = false; + zlibErr = deflate(&stream, (pos < end) ? Z_NO_FLUSH : Z_FINISH); + + if (zlibErr == Z_STREAM_END) + { + if (pos < end) + { + assert(!"zlib buffer unexpectedly empty"); + std::terminate(); + } + finished = true; + } + else if (zlibErr != Z_OK) + { + throw FormatException("Corrupt Data"); + } + + zsize_t bytesToWrite(sizeof(outChunk) - stream.avail_out); + writer->writeData(writeOffset, bytesToWrite, &outChunk[0]); + writeOffset += bytesToWrite; + compressedSize += bytesToWrite; + } +} + + +void +zipper::inflate( + const ReaderPtr& reader, + Writer& writer, + zsize_t& readOffset, + zsize_t readEnd, + zsize_t& writeOffset, + uint32_t& crc) +{ + uint8_t inChunk[ChunkSize]; + uint8_t outChunk[ChunkSize]; + + z_stream stream; + stream.zalloc = NULL; + stream.zfree = NULL; + stream.opaque = NULL; + int zlibErr(inflateInit2(&stream, -WindowBits)); + assert(zlibErr == Z_OK); + InflateDeleter deleter(&stream); + stream.next_in = NULL; + stream.avail_in = 0; + bool finished(false); + + zsize_t pos(readOffset); + crc = crc32(0, NULL, 0); + while (!finished) + { + if (stream.avail_in == 0) + { + stream.avail_in = std::min(zsize_t(ChunkSize), readEnd - pos); + if (stream.avail_in == 0) + { + break; + } + reader->readData(pos, stream.avail_in, &inChunk[0]); + stream.next_in = reinterpret_cast(&inChunk); + pos += stream.avail_in; + } + + stream.next_out = reinterpret_cast(&outChunk); + stream.avail_out = sizeof(outChunk); + + zlibErr = inflate(&stream, Z_SYNC_FLUSH); + + finished = false; + if (zlibErr == Z_STREAM_END) + { + finished = true; + } + else if (zlibErr != Z_OK) + { + throw FormatException("Corrupt Data"); + } + + zsize_t bytesToWrite(sizeof(outChunk) - stream.avail_out); + writer.writeData(writeOffset, bytesToWrite, &outChunk[0]); + writeOffset += bytesToWrite; + crc = crc32(crc, &outChunk[0], bytesToWrite); + } + if (!finished) + { + // Ran out of data to process + throw FormatException("Corrupt Data"); + } + + // We've read data that wasn't consumed! + readOffset = pos - stream.avail_in; +} + diff --git a/software/scsi2sd-util/libzipper-1.0.3/deflate.hh b/software/scsi2sd-util/libzipper-1.0.3/deflate.hh new file mode 100644 index 0000000..84e21e0 --- /dev/null +++ b/software/scsi2sd-util/libzipper-1.0.3/deflate.hh @@ -0,0 +1,40 @@ +// Copyright (C) 2011 Michael McMaster +// +// This file is part of libzipper. +// +// libzipper is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// libzipper is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with libzipper. If not, see . + +#include "zipper.hh" + +#include + +namespace zipper +{ + void deflate( + const Reader& reader, + const WriterPtr& writer, + zsize_t& writeOffset, + zsize_t& uncompressedSize, + zsize_t& compressedSize, + uint32_t& crc); + + void inflate( + const ReaderPtr& reader, + Writer& writer, + zsize_t& readOffset, + zsize_t readEnd, + zsize_t& writeOffset, + uint32_t& crc); +} + diff --git a/software/scsi2sd-util/libzipper-1.0.3/depcomp b/software/scsi2sd-util/libzipper-1.0.3/depcomp new file mode 100755 index 0000000..df8eea7 --- /dev/null +++ b/software/scsi2sd-util/libzipper-1.0.3/depcomp @@ -0,0 +1,630 @@ +#! /bin/sh +# depcomp - compile a program generating dependencies as side-effects + +scriptversion=2009-04-28.21; # UTC + +# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006, 2007, 2009 Free +# Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# Originally written by Alexandre Oliva . + +case $1 in + '') + echo "$0: No command. Try \`$0 --help' for more information." 1>&2 + exit 1; + ;; + -h | --h*) + cat <<\EOF +Usage: depcomp [--help] [--version] PROGRAM [ARGS] + +Run PROGRAMS ARGS to compile a file, generating dependencies +as side-effects. + +Environment variables: + depmode Dependency tracking mode. + source Source file read by `PROGRAMS ARGS'. + object Object file output by `PROGRAMS ARGS'. + DEPDIR directory where to store dependencies. + depfile Dependency file to output. + tmpdepfile Temporary file to use when outputing dependencies. + libtool Whether libtool is used (yes/no). + +Report bugs to . +EOF + exit $? + ;; + -v | --v*) + echo "depcomp $scriptversion" + exit $? + ;; +esac + +if test -z "$depmode" || test -z "$source" || test -z "$object"; then + echo "depcomp: Variables source, object and depmode must be set" 1>&2 + exit 1 +fi + +# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po. +depfile=${depfile-`echo "$object" | + sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`} +tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`} + +rm -f "$tmpdepfile" + +# Some modes work just like other modes, but use different flags. We +# parameterize here, but still list the modes in the big case below, +# to make depend.m4 easier to write. Note that we *cannot* use a case +# here, because this file can only contain one case statement. +if test "$depmode" = hp; then + # HP compiler uses -M and no extra arg. + gccflag=-M + depmode=gcc +fi + +if test "$depmode" = dashXmstdout; then + # This is just like dashmstdout with a different argument. + dashmflag=-xM + depmode=dashmstdout +fi + +cygpath_u="cygpath -u -f -" +if test "$depmode" = msvcmsys; then + # This is just like msvisualcpp but w/o cygpath translation. + # Just convert the backslash-escaped backslashes to single forward + # slashes to satisfy depend.m4 + cygpath_u="sed s,\\\\\\\\,/,g" + depmode=msvisualcpp +fi + +case "$depmode" in +gcc3) +## gcc 3 implements dependency tracking that does exactly what +## we want. Yay! Note: for some reason libtool 1.4 doesn't like +## it if -MD -MP comes after the -MF stuff. Hmm. +## Unfortunately, FreeBSD c89 acceptance of flags depends upon +## the command line argument order; so add the flags where they +## appear in depend2.am. Note that the slowdown incurred here +## affects only configure: in makefiles, %FASTDEP% shortcuts this. + for arg + do + case $arg in + -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;; + *) set fnord "$@" "$arg" ;; + esac + shift # fnord + shift # $arg + done + "$@" + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile" + exit $stat + fi + mv "$tmpdepfile" "$depfile" + ;; + +gcc) +## There are various ways to get dependency output from gcc. Here's +## why we pick this rather obscure method: +## - Don't want to use -MD because we'd like the dependencies to end +## up in a subdir. Having to rename by hand is ugly. +## (We might end up doing this anyway to support other compilers.) +## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like +## -MM, not -M (despite what the docs say). +## - Using -M directly means running the compiler twice (even worse +## than renaming). + if test -z "$gccflag"; then + gccflag=-MD, + fi + "$@" -Wp,"$gccflag$tmpdepfile" + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile" + exit $stat + fi + rm -f "$depfile" + echo "$object : \\" > "$depfile" + alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz +## The second -e expression handles DOS-style file names with drive letters. + sed -e 's/^[^:]*: / /' \ + -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile" +## This next piece of magic avoids the `deleted header file' problem. +## The problem is that when a header file which appears in a .P file +## is deleted, the dependency causes make to die (because there is +## typically no way to rebuild the header). We avoid this by adding +## dummy dependencies for each header file. Too bad gcc doesn't do +## this for us directly. + tr ' ' ' +' < "$tmpdepfile" | +## Some versions of gcc put a space before the `:'. On the theory +## that the space means something, we add a space to the output as +## well. +## Some versions of the HPUX 10.20 sed can't process this invocation +## correctly. Breaking it into two sed invocations is a workaround. + sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +hp) + # This case exists only to let depend.m4 do its work. It works by + # looking at the text of this script. This case will never be run, + # since it is checked for above. + exit 1 + ;; + +sgi) + if test "$libtool" = yes; then + "$@" "-Wp,-MDupdate,$tmpdepfile" + else + "$@" -MDupdate "$tmpdepfile" + fi + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile" + exit $stat + fi + rm -f "$depfile" + + if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files + echo "$object : \\" > "$depfile" + + # Clip off the initial element (the dependent). Don't try to be + # clever and replace this with sed code, as IRIX sed won't handle + # lines with more than a fixed number of characters (4096 in + # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines; + # the IRIX cc adds comments like `#:fec' to the end of the + # dependency line. + tr ' ' ' +' < "$tmpdepfile" \ + | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \ + tr ' +' ' ' >> "$depfile" + echo >> "$depfile" + + # The second pass generates a dummy entry for each header file. + tr ' ' ' +' < "$tmpdepfile" \ + | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \ + >> "$depfile" + else + # The sourcefile does not contain any dependencies, so just + # store a dummy comment line, to avoid errors with the Makefile + # "include basename.Plo" scheme. + echo "#dummy" > "$depfile" + fi + rm -f "$tmpdepfile" + ;; + +aix) + # The C for AIX Compiler uses -M and outputs the dependencies + # in a .u file. In older versions, this file always lives in the + # current directory. Also, the AIX compiler puts `$object:' at the + # start of each line; $object doesn't have directory information. + # Version 6 uses the directory in both cases. + dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` + test "x$dir" = "x$object" && dir= + base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` + if test "$libtool" = yes; then + tmpdepfile1=$dir$base.u + tmpdepfile2=$base.u + tmpdepfile3=$dir.libs/$base.u + "$@" -Wc,-M + else + tmpdepfile1=$dir$base.u + tmpdepfile2=$dir$base.u + tmpdepfile3=$dir$base.u + "$@" -M + fi + stat=$? + + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" + exit $stat + fi + + for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" + do + test -f "$tmpdepfile" && break + done + if test -f "$tmpdepfile"; then + # Each line is of the form `foo.o: dependent.h'. + # Do two passes, one to just change these to + # `$object: dependent.h' and one to simply `dependent.h:'. + sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile" + # That's a tab and a space in the []. + sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile" + else + # The sourcefile does not contain any dependencies, so just + # store a dummy comment line, to avoid errors with the Makefile + # "include basename.Plo" scheme. + echo "#dummy" > "$depfile" + fi + rm -f "$tmpdepfile" + ;; + +icc) + # Intel's C compiler understands `-MD -MF file'. However on + # icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c + # ICC 7.0 will fill foo.d with something like + # foo.o: sub/foo.c + # foo.o: sub/foo.h + # which is wrong. We want: + # sub/foo.o: sub/foo.c + # sub/foo.o: sub/foo.h + # sub/foo.c: + # sub/foo.h: + # ICC 7.1 will output + # foo.o: sub/foo.c sub/foo.h + # and will wrap long lines using \ : + # foo.o: sub/foo.c ... \ + # sub/foo.h ... \ + # ... + + "$@" -MD -MF "$tmpdepfile" + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile" + exit $stat + fi + rm -f "$depfile" + # Each line is of the form `foo.o: dependent.h', + # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'. + # Do two passes, one to just change these to + # `$object: dependent.h' and one to simply `dependent.h:'. + sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile" + # Some versions of the HPUX 10.20 sed can't process this invocation + # correctly. Breaking it into two sed invocations is a workaround. + sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" | + sed -e 's/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +hp2) + # The "hp" stanza above does not work with aCC (C++) and HP's ia64 + # compilers, which have integrated preprocessors. The correct option + # to use with these is +Maked; it writes dependencies to a file named + # 'foo.d', which lands next to the object file, wherever that + # happens to be. + # Much of this is similar to the tru64 case; see comments there. + dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` + test "x$dir" = "x$object" && dir= + base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` + if test "$libtool" = yes; then + tmpdepfile1=$dir$base.d + tmpdepfile2=$dir.libs/$base.d + "$@" -Wc,+Maked + else + tmpdepfile1=$dir$base.d + tmpdepfile2=$dir$base.d + "$@" +Maked + fi + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile1" "$tmpdepfile2" + exit $stat + fi + + for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" + do + test -f "$tmpdepfile" && break + done + if test -f "$tmpdepfile"; then + sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile" + # Add `dependent.h:' lines. + sed -ne '2,${ + s/^ *// + s/ \\*$// + s/$/:/ + p + }' "$tmpdepfile" >> "$depfile" + else + echo "#dummy" > "$depfile" + fi + rm -f "$tmpdepfile" "$tmpdepfile2" + ;; + +tru64) + # The Tru64 compiler uses -MD to generate dependencies as a side + # effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'. + # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put + # dependencies in `foo.d' instead, so we check for that too. + # Subdirectories are respected. + dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` + test "x$dir" = "x$object" && dir= + base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` + + if test "$libtool" = yes; then + # With Tru64 cc, shared objects can also be used to make a + # static library. This mechanism is used in libtool 1.4 series to + # handle both shared and static libraries in a single compilation. + # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d. + # + # With libtool 1.5 this exception was removed, and libtool now + # generates 2 separate objects for the 2 libraries. These two + # compilations output dependencies in $dir.libs/$base.o.d and + # in $dir$base.o.d. We have to check for both files, because + # one of the two compilations can be disabled. We should prefer + # $dir$base.o.d over $dir.libs/$base.o.d because the latter is + # automatically cleaned when .libs/ is deleted, while ignoring + # the former would cause a distcleancheck panic. + tmpdepfile1=$dir.libs/$base.lo.d # libtool 1.4 + tmpdepfile2=$dir$base.o.d # libtool 1.5 + tmpdepfile3=$dir.libs/$base.o.d # libtool 1.5 + tmpdepfile4=$dir.libs/$base.d # Compaq CCC V6.2-504 + "$@" -Wc,-MD + else + tmpdepfile1=$dir$base.o.d + tmpdepfile2=$dir$base.d + tmpdepfile3=$dir$base.d + tmpdepfile4=$dir$base.d + "$@" -MD + fi + + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4" + exit $stat + fi + + for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4" + do + test -f "$tmpdepfile" && break + done + if test -f "$tmpdepfile"; then + sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile" + # That's a tab and a space in the []. + sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile" + else + echo "#dummy" > "$depfile" + fi + rm -f "$tmpdepfile" + ;; + +#nosideeffect) + # This comment above is used by automake to tell side-effect + # dependency tracking mechanisms from slower ones. + +dashmstdout) + # Important note: in order to support this mode, a compiler *must* + # always write the preprocessed file to stdout, regardless of -o. + "$@" || exit $? + + # Remove the call to Libtool. + if test "$libtool" = yes; then + while test "X$1" != 'X--mode=compile'; do + shift + done + shift + fi + + # Remove `-o $object'. + IFS=" " + for arg + do + case $arg in + -o) + shift + ;; + $object) + shift + ;; + *) + set fnord "$@" "$arg" + shift # fnord + shift # $arg + ;; + esac + done + + test -z "$dashmflag" && dashmflag=-M + # Require at least two characters before searching for `:' + # in the target name. This is to cope with DOS-style filenames: + # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise. + "$@" $dashmflag | + sed 's:^[ ]*[^: ][^:][^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile" + rm -f "$depfile" + cat < "$tmpdepfile" > "$depfile" + tr ' ' ' +' < "$tmpdepfile" | \ +## Some versions of the HPUX 10.20 sed can't process this invocation +## correctly. Breaking it into two sed invocations is a workaround. + sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +dashXmstdout) + # This case only exists to satisfy depend.m4. It is never actually + # run, as this mode is specially recognized in the preamble. + exit 1 + ;; + +makedepend) + "$@" || exit $? + # Remove any Libtool call + if test "$libtool" = yes; then + while test "X$1" != 'X--mode=compile'; do + shift + done + shift + fi + # X makedepend + shift + cleared=no eat=no + for arg + do + case $cleared in + no) + set ""; shift + cleared=yes ;; + esac + if test $eat = yes; then + eat=no + continue + fi + case "$arg" in + -D*|-I*) + set fnord "$@" "$arg"; shift ;; + # Strip any option that makedepend may not understand. Remove + # the object too, otherwise makedepend will parse it as a source file. + -arch) + eat=yes ;; + -*|$object) + ;; + *) + set fnord "$@" "$arg"; shift ;; + esac + done + obj_suffix=`echo "$object" | sed 's/^.*\././'` + touch "$tmpdepfile" + ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@" + rm -f "$depfile" + cat < "$tmpdepfile" > "$depfile" + sed '1,2d' "$tmpdepfile" | tr ' ' ' +' | \ +## Some versions of the HPUX 10.20 sed can't process this invocation +## correctly. Breaking it into two sed invocations is a workaround. + sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" "$tmpdepfile".bak + ;; + +cpp) + # Important note: in order to support this mode, a compiler *must* + # always write the preprocessed file to stdout. + "$@" || exit $? + + # Remove the call to Libtool. + if test "$libtool" = yes; then + while test "X$1" != 'X--mode=compile'; do + shift + done + shift + fi + + # Remove `-o $object'. + IFS=" " + for arg + do + case $arg in + -o) + shift + ;; + $object) + shift + ;; + *) + set fnord "$@" "$arg" + shift # fnord + shift # $arg + ;; + esac + done + + "$@" -E | + sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \ + -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' | + sed '$ s: \\$::' > "$tmpdepfile" + rm -f "$depfile" + echo "$object : \\" > "$depfile" + cat < "$tmpdepfile" >> "$depfile" + sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +msvisualcpp) + # Important note: in order to support this mode, a compiler *must* + # always write the preprocessed file to stdout. + "$@" || exit $? + + # Remove the call to Libtool. + if test "$libtool" = yes; then + while test "X$1" != 'X--mode=compile'; do + shift + done + shift + fi + + IFS=" " + for arg + do + case "$arg" in + -o) + shift + ;; + $object) + shift + ;; + "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI") + set fnord "$@" + shift + shift + ;; + *) + set fnord "$@" "$arg" + shift + shift + ;; + esac + done + "$@" -E 2>/dev/null | + sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile" + rm -f "$depfile" + echo "$object : \\" > "$depfile" + sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile" + echo " " >> "$depfile" + sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +msvcmsys) + # This case exists only to let depend.m4 do its work. It works by + # looking at the text of this script. This case will never be run, + # since it is checked for above. + exit 1 + ;; + +none) + exec "$@" + ;; + +*) + echo "Unknown depmode $depmode" 1>&2 + exit 1 + ;; +esac + +exit 0 + +# Local Variables: +# mode: shell-script +# sh-indentation: 2 +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-time-zone: "UTC" +# time-stamp-end: "; # UTC" +# End: diff --git a/software/scsi2sd-util/libzipper-1.0.3/doxygen.am b/software/scsi2sd-util/libzipper-1.0.3/doxygen.am new file mode 100644 index 0000000..51be1c3 --- /dev/null +++ b/software/scsi2sd-util/libzipper-1.0.3/doxygen.am @@ -0,0 +1,202 @@ +## --------------------------------- ## +## Format-independent Doxygen rules. ## +## --------------------------------- ## + +DOXYGEN_INSTALL= + +if DX_COND_doc + +## ------------------------------- ## +## Rules specific for HTML output. ## +## ------------------------------- ## + +if DX_COND_html + +DX_CLEAN_HTML = @DX_DOCDIR@/html + +doxygen-install-html: + $(INSTALL) -d $(DESTDIR)$(docdir)/html; \ + $(INSTALL_DATA) @DX_DOCDIR@/html/* $(DESTDIR)$(docdir)/html; + +DOXYGEN_INSTALL+= doxygen-install-html + +endif DX_COND_html + +## ------------------------------ ## +## Rules specific for CHM output. ## +## ------------------------------ ## + +if DX_COND_chm + +DX_CLEAN_CHM = @DX_DOCDIR@/chm + +if DX_COND_chi + +DX_CLEAN_CHI = @DX_DOCDIR@/@PACKAGE@.chi + +endif DX_COND_chi + +doxygen-install-chm: + $(INSTALL) -d $(DESTDIR)$(docdir)/chm; \ + $(INSTALL_DATA) @DX_DOCDIR@/chm/* $(DESTDIR)$(docdir)/chm; + +DOXYGEN_INSTALL+= doxygen-install-chm + +endif DX_COND_chm + +## ------------------------------ ## +## Rules specific for MAN output. ## +## ------------------------------ ## + +if DX_COND_man + +DX_CLEAN_MAN = @DX_DOCDIR@/man + +doxygen-install-man: + $(INSTALL) -d $(DESTDIR)$(docdir)/man; \ + $(INSTALL_DATA) @DX_DOCDIR@/man/* $(DESTDIR)$(docdir)/man; + +DOXYGEN_INSTALL+= doxygen-install-man +endif DX_COND_man + +## ------------------------------ ## +## Rules specific for RTF output. ## +## ------------------------------ ## + +if DX_COND_rtf + +DX_CLEAN_RTF = @DX_DOCDIR@/rtf + +doxygen-install-rtf: + $(INSTALL) -d $(DESTDIR)$(docdir)/rtf; \ + $(INSTALL_DATA) @DX_DOCDIR@/rtf/* $(DESTDIR)$(docdir)/rtf; + +DOXYGEN_INSTALL+= doxygen-install-rtf +endif DX_COND_rtf + +## ------------------------------ ## +## Rules specific for XML output. ## +## ------------------------------ ## + +if DX_COND_xml + +DX_CLEAN_XML = @DX_DOCDIR@/xml + +doxygen-install-xml: + $(INSTALL) -d $(DESTDIR)$(docdir)/xml; \ + $(INSTALL_DATA) @DX_DOCDIR@/xml/* $(DESTDIR)$(docdir)/xml; + +DOXYGEN_INSTALL+= doxygen-install-xml + +endif DX_COND_xml + +## ----------------------------- ## +## Rules specific for PS output. ## +## ----------------------------- ## + +if DX_COND_ps + +DX_CLEAN_PS = @DX_DOCDIR@/@PACKAGE@.ps + +DX_PS_GOAL = doxygen-ps + +doxygen-ps: @DX_DOCDIR@/@PACKAGE@.ps + +@DX_DOCDIR@/@PACKAGE@.ps: @DX_DOCDIR@/@PACKAGE@.tag + cd @DX_DOCDIR@/latex; \ + rm -f *.aux *.toc *.idx *.ind *.ilg *.log *.out; \ + $(DX_LATEX) refman.tex; \ + $(MAKEINDEX_PATH) refman.idx; \ + $(DX_LATEX) refman.tex; \ + countdown=5; \ + while $(DX_EGREP) 'Rerun (LaTeX|to get cross-references right)' \ + refman.log > /dev/null 2>&1 \ + && test $$countdown -gt 0; do \ + $(DX_LATEX) refman.tex; \ + countdown=`expr $$countdown - 1`; \ + done; \ + $(DX_DVIPS) -o ../@PACKAGE@.ps refman.dvi + +doxygen-install-ps: + $(INSTALL_DATA) @DX_DOCDIR@/@PACKAGE@.ps $(DESTDIR)$(docdir); + +DOXYGEN_INSTALL+= doxygen-install-ps +endif DX_COND_ps + +## ------------------------------ ## +## Rules specific for PDF output. ## +## ------------------------------ ## + +if DX_COND_pdf + +DX_CLEAN_PDF = @DX_DOCDIR@/@PACKAGE@.pdf + +DX_PDF_GOAL = doxygen-pdf + +doxygen-pdf: @DX_DOCDIR@/@PACKAGE@.pdf + +@DX_DOCDIR@/@PACKAGE@.pdf: @DX_DOCDIR@/@PACKAGE@.tag + cd @DX_DOCDIR@/latex; \ + rm -f *.aux *.toc *.idx *.ind *.ilg *.log *.out; \ + $(DX_PDFLATEX) refman.tex; \ + $(DX_MAKEINDEX) refman.idx; \ + $(DX_PDFLATEX) refman.tex; \ + countdown=5; \ + while $(DX_EGREP) 'Rerun (LaTeX|to get cross-references right)' \ + refman.log > /dev/null 2>&1 \ + && test $$countdown -gt 0; do \ + $(DX_PDFLATEX) refman.tex; \ + countdown=`expr $$countdown - 1`; \ + done; \ + mv refman.pdf ../@PACKAGE@.pdf + +doxygen-install-pdf: + $(INSTALL_DATA) @DX_DOCDIR@/@PACKAGE@.pdf $(DESTDIR)$(docdir); + +DOXYGEN_INSTALL+= doxygen-install-pdf +endif DX_COND_pdf + +## ------------------------------------------------- ## +## Rules specific for LaTeX (shared for PS and PDF). ## +## ------------------------------------------------- ## + +if DX_COND_latex + +DX_CLEAN_LATEX = @DX_DOCDIR@/latex + +doxygen-install-latex: + $(INSTALL) -d $(DESTDIR)$(docdir)/latex; \ + $(INSTALL_DATA) @DX_DOCDIR@/latex/* $(DESTDIR)$(docdir)/latex; + +DOXYGEN_INSTALL+= doxygen-install-latex +endif DX_COND_latex + +.PHONY: doxygen-run doxygen-doc doxygen-install $(DX_PS_GOAL) $(DX_PDF_GOAL) + +.INTERMEDIATE: doxygen-run $(DX_PS_GOAL) $(DX_PDF_GOAL) + +doxygen-run: @DX_DOCDIR@/@PACKAGE@.tag + +doxygen-doc: doxygen-run $(DX_PS_GOAL) $(DX_PDF_GOAL) + +doxygen-install: $(DOXYGEN_INSTALL) + +@DX_DOCDIR@/@PACKAGE@.tag: $(DX_CONFIG) $(pkginclude_HEADERS) + rm -rf @DX_DOCDIR@ + $(DX_ENV) $(DX_DOXYGEN) $(DX_CONFIG) + +DX_CLEANFILES = \ + @DX_DOCDIR@/@PACKAGE@.tag \ + -r \ + $(DX_CLEAN_HTML) \ + $(DX_CLEAN_CHM) \ + $(DX_CLEAN_CHI) \ + $(DX_CLEAN_MAN) \ + $(DX_CLEAN_RTF) \ + $(DX_CLEAN_XML) \ + $(DX_CLEAN_PS) \ + $(DX_CLEAN_PDF) \ + $(DX_CLEAN_LATEX) + +endif DX_COND_doc + diff --git a/software/scsi2sd-util/libzipper-1.0.3/gzip.cc b/software/scsi2sd-util/libzipper-1.0.3/gzip.cc new file mode 100644 index 0000000..7ff1642 --- /dev/null +++ b/software/scsi2sd-util/libzipper-1.0.3/gzip.cc @@ -0,0 +1,270 @@ +// Copyright (C) 2011 Michael McMaster +// +// This file is part of libzipper. +// +// libzipper is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// libzipper is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with libzipper. If not, see . + +#include "zipper.hh" +#include "gzip.hh" +#include "util.hh" +#include "deflate.hh" + +#include +#include +#include +#include + +#include + +using namespace zipper; + +namespace +{ + size_t + findNull(const std::vector& zipData, size_t start) + { + if (start >= zipData.size()) + { + throw FormatException("Unexpected end-of-file"); + } + + while (zipData[start] != 0) + { + ++start; + if (start >= zipData.size()) + { + throw FormatException("Unexpected end-of-file"); + } + } + return start; + } + + class FileEntry : public CompressedFile + { + public: + FileEntry( + const ReaderPtr& reader, + zsize_t dataOffset, + const std::string& filename, + time_t modTime + ) : + m_reader(reader), + m_dataOffset(dataOffset), + m_fileName(filename) + { + m_modTime.tv_sec = modTime; + m_modTime.tv_usec = 0; + } + + virtual bool isDecompressSupported() const + { + return true; + } + + virtual const std::string& getPath() const + { + return m_fileName; + } + + virtual zsize_t getCompressedSize() const { return -1; } + virtual zsize_t getUncompressedSize() const { return -1; } + virtual const timeval& getModificationTime() const { return m_modTime; } + + virtual void decompress(Writer& writer) + { + zsize_t endCompressedBytes = m_reader->getSize() - 8; // CRC+ISIZE + zsize_t inPos(m_dataOffset); + zsize_t outPos(0); + uint32_t crc(0); + inflate( + m_reader, + writer, + inPos, + endCompressedBytes, + outPos, + crc); + + uint8_t crcBuffer[4]; + m_reader->readData(inPos, sizeof(crcBuffer), &crcBuffer[0]); + uint32_t savedCRC = read32_le(&crcBuffer[0]); + if (savedCRC != crc) + { + throw FormatException("Corrupt Data (CRC Failure)"); + } + } + + private: + ReaderPtr m_reader; + zsize_t m_dataOffset; + std::string m_fileName; + timeval m_modTime; + }; +} + +std::vector +zipper::ungzip(const ReaderPtr& reader) +{ + enum + { + MaxHeader = 64*1024 // Artifical limit to simplify code + }; + + if (!isGzip(reader)) + { + throw FormatException("Invalid gzip file"); + } + + std::vector header( + std::min(reader->getSize(), zsize_t(MaxHeader))); + reader->readData(0, header.size(), &header[0]); + + if (header[2] != 8) // "deflate" method + { + throw UnsupportedException("Unknown gzip compression method"); + } + + bool fextra = (header[3] & 4) != 0; + bool fname = (header[3] & 8) != 0; + bool fcomment = (header[3] & 0x10) != 0; + bool fhcrc = (header[3] & 2) != 0; + + time_t modTime = read32_le(&header[4]); + + size_t offset(10); + + if (fextra) + { + if (offset + 2 > header.size()) + { + throw FormatException("Unexpected end-of-file"); + } + uint16_t fextraBytes(read16_le(header, offset)); + offset += 2; + + offset += fextraBytes; + } + + std::string embeddedName(reader->getSourceName()); + if (fname) + { + size_t nullOffset(findNull(header, offset)); + embeddedName = + std::string( + reinterpret_cast(&header[offset]), nullOffset - offset); + offset = nullOffset + 1; + } + + if (fcomment) + { + size_t nullOffset(findNull(header, offset)); + offset = nullOffset + 1; + } + + if (fhcrc) + { + offset += 2; + } + + if (offset >= header.size()) + { + throw FormatException("Unexpected end-of-file"); + } + + std::vector result; + result.push_back( + CompressedFilePtr( + new FileEntry(reader, offset, embeddedName, modTime))); + + return result; +} + +bool +zipper::isGzip(const ReaderPtr& reader) +{ + enum Constants + { + MinFileBytes = 18, // Header + CRC + size + ID1 = 0x1f, + ID2 = 0x8b + }; + + bool isGzip(false); + if (reader->getSize() >= MinFileBytes) + { + uint8_t magic[2]; + reader->readData(0, sizeof(magic), &magic[0]); + isGzip = (magic[0] == ID1) && (magic[1] == ID2); + } + return isGzip; +} + +void +zipper::gzip( + const std::string& filename, + const Reader& reader, + const WriterPtr& writer) +{ + enum Constants + { + ChunkSize = 64*1024, + WindowBits = 15 + }; + + static uint8_t Header[] = + { + 0x1f, 0x8b, // ID + 0x08, // deflate + 0x8, // Flags (filename set) + 0x0, 0x0, 0x0, 0x0, // mtime + 0x0, // Extra flags + 0xff // OS + }; + + zsize_t outPos(writer->getSize()); + + // Write header + { + uint8_t buffer[ChunkSize]; + memcpy(buffer, Header, sizeof(Header)); + + write32_le(reader.getModTime().tv_sec, &buffer[4]); // modtime + + zsize_t pos(sizeof(Header)); + + zsize_t filenameSize(filename.size()); + if (filenameSize > (ChunkSize - pos - 1)) + { + filenameSize = ChunkSize - pos - 1; + } + std::copy(&filename[0], &filename[filenameSize], &buffer[pos]); + pos += filenameSize; + buffer[pos++] = '\0'; + + writer->writeData(outPos, pos, &buffer[0]); + outPos += pos; + } + + // Compress data + zsize_t uncompressedSize(0); + zsize_t compressedSize(0); + uint32_t crc(0); + deflate(reader, writer, outPos, uncompressedSize, compressedSize, crc); + + // Write trailer. + uint8_t trailer[8]; + write32_le(crc, &trailer[0]); + write32_le(reader.getSize(), &trailer[4]); + writer->writeData(outPos, sizeof(trailer), &trailer[0]); +} + diff --git a/software/scsi2sd-util/libzipper-1.0.3/gzip.hh b/software/scsi2sd-util/libzipper-1.0.3/gzip.hh new file mode 100644 index 0000000..9acf552 --- /dev/null +++ b/software/scsi2sd-util/libzipper-1.0.3/gzip.hh @@ -0,0 +1,33 @@ +// Copyright (C) 2011 Michael McMaster +// +// This file is part of libzipper. +// +// libzipper is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// libzipper is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with libzipper. If not, see . + +#include "zipper.hh" + +#include + +namespace zipper +{ + bool isGzip(const ReaderPtr& reader); + + void gzip( + const std::string& filename, + const Reader& reader, + const WriterPtr& writer); + + std::vector ungzip(const ReaderPtr& reader); +} + diff --git a/software/scsi2sd-util/libzipper-1.0.3/install-sh b/software/scsi2sd-util/libzipper-1.0.3/install-sh new file mode 100755 index 0000000..6781b98 --- /dev/null +++ b/software/scsi2sd-util/libzipper-1.0.3/install-sh @@ -0,0 +1,520 @@ +#!/bin/sh +# install - install a program, script, or datafile + +scriptversion=2009-04-28.21; # UTC + +# This originates from X11R5 (mit/util/scripts/install.sh), which was +# later released in X11R6 (xc/config/util/install.sh) with the +# following copyright and license. +# +# Copyright (C) 1994 X Consortium +# +# Permission is hereby granted, free of charge, to any person obtaining a copy +# of this software and associated documentation files (the "Software"), to +# deal in the Software without restriction, including without limitation the +# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or +# sell copies of the Software, and to permit persons to whom the Software is +# furnished to do so, subject to the following conditions: +# +# The above copyright notice and this permission notice shall be included in +# all copies or substantial portions of the Software. +# +# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN +# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC- +# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. +# +# Except as contained in this notice, the name of the X Consortium shall not +# be used in advertising or otherwise to promote the sale, use or other deal- +# ings in this Software without prior written authorization from the X Consor- +# tium. +# +# +# FSF changes to this file are in the public domain. +# +# Calling this script install-sh is preferred over install.sh, to prevent +# `make' implicit rules from creating a file called install from it +# when there is no Makefile. +# +# This script is compatible with the BSD install script, but was written +# from scratch. + +nl=' +' +IFS=" "" $nl" + +# set DOITPROG to echo to test this script + +# Don't use :- since 4.3BSD and earlier shells don't like it. +doit=${DOITPROG-} +if test -z "$doit"; then + doit_exec=exec +else + doit_exec=$doit +fi + +# Put in absolute file names if you don't have them in your path; +# or use environment vars. + +chgrpprog=${CHGRPPROG-chgrp} +chmodprog=${CHMODPROG-chmod} +chownprog=${CHOWNPROG-chown} +cmpprog=${CMPPROG-cmp} +cpprog=${CPPROG-cp} +mkdirprog=${MKDIRPROG-mkdir} +mvprog=${MVPROG-mv} +rmprog=${RMPROG-rm} +stripprog=${STRIPPROG-strip} + +posix_glob='?' +initialize_posix_glob=' + test "$posix_glob" != "?" || { + if (set -f) 2>/dev/null; then + posix_glob= + else + posix_glob=: + fi + } +' + +posix_mkdir= + +# Desired mode of installed file. +mode=0755 + +chgrpcmd= +chmodcmd=$chmodprog +chowncmd= +mvcmd=$mvprog +rmcmd="$rmprog -f" +stripcmd= + +src= +dst= +dir_arg= +dst_arg= + +copy_on_change=false +no_target_directory= + +usage="\ +Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE + or: $0 [OPTION]... SRCFILES... DIRECTORY + or: $0 [OPTION]... -t DIRECTORY SRCFILES... + or: $0 [OPTION]... -d DIRECTORIES... + +In the 1st form, copy SRCFILE to DSTFILE. +In the 2nd and 3rd, copy all SRCFILES to DIRECTORY. +In the 4th, create DIRECTORIES. + +Options: + --help display this help and exit. + --version display version info and exit. + + -c (ignored) + -C install only if different (preserve the last data modification time) + -d create directories instead of installing files. + -g GROUP $chgrpprog installed files to GROUP. + -m MODE $chmodprog installed files to MODE. + -o USER $chownprog installed files to USER. + -s $stripprog installed files. + -t DIRECTORY install into DIRECTORY. + -T report an error if DSTFILE is a directory. + +Environment variables override the default commands: + CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG + RMPROG STRIPPROG +" + +while test $# -ne 0; do + case $1 in + -c) ;; + + -C) copy_on_change=true;; + + -d) dir_arg=true;; + + -g) chgrpcmd="$chgrpprog $2" + shift;; + + --help) echo "$usage"; exit $?;; + + -m) mode=$2 + case $mode in + *' '* | *' '* | *' +'* | *'*'* | *'?'* | *'['*) + echo "$0: invalid mode: $mode" >&2 + exit 1;; + esac + shift;; + + -o) chowncmd="$chownprog $2" + shift;; + + -s) stripcmd=$stripprog;; + + -t) dst_arg=$2 + shift;; + + -T) no_target_directory=true;; + + --version) echo "$0 $scriptversion"; exit $?;; + + --) shift + break;; + + -*) echo "$0: invalid option: $1" >&2 + exit 1;; + + *) break;; + esac + shift +done + +if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then + # When -d is used, all remaining arguments are directories to create. + # When -t is used, the destination is already specified. + # Otherwise, the last argument is the destination. Remove it from $@. + for arg + do + if test -n "$dst_arg"; then + # $@ is not empty: it contains at least $arg. + set fnord "$@" "$dst_arg" + shift # fnord + fi + shift # arg + dst_arg=$arg + done +fi + +if test $# -eq 0; then + if test -z "$dir_arg"; then + echo "$0: no input file specified." >&2 + exit 1 + fi + # It's OK to call `install-sh -d' without argument. + # This can happen when creating conditional directories. + exit 0 +fi + +if test -z "$dir_arg"; then + trap '(exit $?); exit' 1 2 13 15 + + # Set umask so as not to create temps with too-generous modes. + # However, 'strip' requires both read and write access to temps. + case $mode in + # Optimize common cases. + *644) cp_umask=133;; + *755) cp_umask=22;; + + *[0-7]) + if test -z "$stripcmd"; then + u_plus_rw= + else + u_plus_rw='% 200' + fi + cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;; + *) + if test -z "$stripcmd"; then + u_plus_rw= + else + u_plus_rw=,u+rw + fi + cp_umask=$mode$u_plus_rw;; + esac +fi + +for src +do + # Protect names starting with `-'. + case $src in + -*) src=./$src;; + esac + + if test -n "$dir_arg"; then + dst=$src + dstdir=$dst + test -d "$dstdir" + dstdir_status=$? + else + + # Waiting for this to be detected by the "$cpprog $src $dsttmp" command + # might cause directories to be created, which would be especially bad + # if $src (and thus $dsttmp) contains '*'. + if test ! -f "$src" && test ! -d "$src"; then + echo "$0: $src does not exist." >&2 + exit 1 + fi + + if test -z "$dst_arg"; then + echo "$0: no destination specified." >&2 + exit 1 + fi + + dst=$dst_arg + # Protect names starting with `-'. + case $dst in + -*) dst=./$dst;; + esac + + # If destination is a directory, append the input filename; won't work + # if double slashes aren't ignored. + if test -d "$dst"; then + if test -n "$no_target_directory"; then + echo "$0: $dst_arg: Is a directory" >&2 + exit 1 + fi + dstdir=$dst + dst=$dstdir/`basename "$src"` + dstdir_status=0 + else + # Prefer dirname, but fall back on a substitute if dirname fails. + dstdir=` + (dirname "$dst") 2>/dev/null || + expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$dst" : 'X\(//\)[^/]' \| \ + X"$dst" : 'X\(//\)$' \| \ + X"$dst" : 'X\(/\)' \| . 2>/dev/null || + echo X"$dst" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q' + ` + + test -d "$dstdir" + dstdir_status=$? + fi + fi + + obsolete_mkdir_used=false + + if test $dstdir_status != 0; then + case $posix_mkdir in + '') + # Create intermediate dirs using mode 755 as modified by the umask. + # This is like FreeBSD 'install' as of 1997-10-28. + umask=`umask` + case $stripcmd.$umask in + # Optimize common cases. + *[2367][2367]) mkdir_umask=$umask;; + .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;; + + *[0-7]) + mkdir_umask=`expr $umask + 22 \ + - $umask % 100 % 40 + $umask % 20 \ + - $umask % 10 % 4 + $umask % 2 + `;; + *) mkdir_umask=$umask,go-w;; + esac + + # With -d, create the new directory with the user-specified mode. + # Otherwise, rely on $mkdir_umask. + if test -n "$dir_arg"; then + mkdir_mode=-m$mode + else + mkdir_mode= + fi + + posix_mkdir=false + case $umask in + *[123567][0-7][0-7]) + # POSIX mkdir -p sets u+wx bits regardless of umask, which + # is incompatible with FreeBSD 'install' when (umask & 300) != 0. + ;; + *) + tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$ + trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0 + + if (umask $mkdir_umask && + exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1 + then + if test -z "$dir_arg" || { + # Check for POSIX incompatibilities with -m. + # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or + # other-writeable bit of parent directory when it shouldn't. + # FreeBSD 6.1 mkdir -m -p sets mode of existing directory. + ls_ld_tmpdir=`ls -ld "$tmpdir"` + case $ls_ld_tmpdir in + d????-?r-*) different_mode=700;; + d????-?--*) different_mode=755;; + *) false;; + esac && + $mkdirprog -m$different_mode -p -- "$tmpdir" && { + ls_ld_tmpdir_1=`ls -ld "$tmpdir"` + test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1" + } + } + then posix_mkdir=: + fi + rmdir "$tmpdir/d" "$tmpdir" + else + # Remove any dirs left behind by ancient mkdir implementations. + rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null + fi + trap '' 0;; + esac;; + esac + + if + $posix_mkdir && ( + umask $mkdir_umask && + $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir" + ) + then : + else + + # The umask is ridiculous, or mkdir does not conform to POSIX, + # or it failed possibly due to a race condition. Create the + # directory the slow way, step by step, checking for races as we go. + + case $dstdir in + /*) prefix='/';; + -*) prefix='./';; + *) prefix='';; + esac + + eval "$initialize_posix_glob" + + oIFS=$IFS + IFS=/ + $posix_glob set -f + set fnord $dstdir + shift + $posix_glob set +f + IFS=$oIFS + + prefixes= + + for d + do + test -z "$d" && continue + + prefix=$prefix$d + if test -d "$prefix"; then + prefixes= + else + if $posix_mkdir; then + (umask=$mkdir_umask && + $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break + # Don't fail if two instances are running concurrently. + test -d "$prefix" || exit 1 + else + case $prefix in + *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;; + *) qprefix=$prefix;; + esac + prefixes="$prefixes '$qprefix'" + fi + fi + prefix=$prefix/ + done + + if test -n "$prefixes"; then + # Don't fail if two instances are running concurrently. + (umask $mkdir_umask && + eval "\$doit_exec \$mkdirprog $prefixes") || + test -d "$dstdir" || exit 1 + obsolete_mkdir_used=true + fi + fi + fi + + if test -n "$dir_arg"; then + { test -z "$chowncmd" || $doit $chowncmd "$dst"; } && + { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } && + { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false || + test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1 + else + + # Make a couple of temp file names in the proper directory. + dsttmp=$dstdir/_inst.$$_ + rmtmp=$dstdir/_rm.$$_ + + # Trap to clean up those temp files at exit. + trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0 + + # Copy the file name to the temp name. + (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") && + + # and set any options; do chmod last to preserve setuid bits. + # + # If any of these fail, we abort the whole thing. If we want to + # ignore errors from any of these, just make sure not to ignore + # errors from the above "$doit $cpprog $src $dsttmp" command. + # + { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } && + { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } && + { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } && + { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } && + + # If -C, don't bother to copy if it wouldn't change the file. + if $copy_on_change && + old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` && + new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` && + + eval "$initialize_posix_glob" && + $posix_glob set -f && + set X $old && old=:$2:$4:$5:$6 && + set X $new && new=:$2:$4:$5:$6 && + $posix_glob set +f && + + test "$old" = "$new" && + $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1 + then + rm -f "$dsttmp" + else + # Rename the file to the real destination. + $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null || + + # The rename failed, perhaps because mv can't rename something else + # to itself, or perhaps because mv is so ancient that it does not + # support -f. + { + # Now remove or move aside any old file at destination location. + # We try this two ways since rm can't unlink itself on some + # systems and the destination file might be busy for other + # reasons. In this case, the final cleanup might fail but the new + # file should still install successfully. + { + test ! -f "$dst" || + $doit $rmcmd -f "$dst" 2>/dev/null || + { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null && + { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; } + } || + { echo "$0: cannot unlink or rename $dst" >&2 + (exit 1); exit 1 + } + } && + + # Now rename the file to the real destination. + $doit $mvcmd "$dsttmp" "$dst" + } + fi || exit 1 + + trap '' 0 + fi +done + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-time-zone: "UTC" +# time-stamp-end: "; # UTC" +# End: diff --git a/software/scsi2sd-util/libzipper-1.0.3/libzipper1.pc.in b/software/scsi2sd-util/libzipper-1.0.3/libzipper1.pc.in new file mode 100644 index 0000000..f1b40c8 --- /dev/null +++ b/software/scsi2sd-util/libzipper-1.0.3/libzipper1.pc.in @@ -0,0 +1,11 @@ +prefix=@prefix@ +exec_prefix=@exec_prefix@ +libdir=@libdir@ +includedir=@includedir@ + +Name: libzipper +Description: libzipper offers a flexible C++ interface for reading compressed files in multiple formats. +Requires: zlib +Version: @libzipper_version@ +Libs: -L${libdir} -lzipper +Cflags: -I${includedir} diff --git a/software/scsi2sd-util/libzipper-1.0.3/ltmain.sh b/software/scsi2sd-util/libzipper-1.0.3/ltmain.sh new file mode 100755 index 0000000..c7bf234 --- /dev/null +++ b/software/scsi2sd-util/libzipper-1.0.3/ltmain.sh @@ -0,0 +1,9642 @@ + +# libtool (GNU libtool) 2.4 +# Written by Gordon Matzigkeit , 1996 + +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, +# 2007, 2008, 2009, 2010 Free Software Foundation, Inc. +# This is free software; see the source for copying conditions. There is NO +# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + +# GNU Libtool is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# As a special exception to the GNU General Public License, +# if you distribute this file as part of a program or library that +# is built using GNU Libtool, you may include this file under the +# same distribution terms that you use for the rest of that program. +# +# GNU Libtool is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with GNU Libtool; see the file COPYING. If not, a copy +# can be downloaded from http://www.gnu.org/licenses/gpl.html, +# or obtained by writing to the Free Software Foundation, Inc., +# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + +# Usage: $progname [OPTION]... [MODE-ARG]... +# +# Provide generalized library-building support services. +# +# --config show all configuration variables +# --debug enable verbose shell tracing +# -n, --dry-run display commands without modifying any files +# --features display basic configuration information and exit +# --mode=MODE use operation mode MODE +# --preserve-dup-deps don't remove duplicate dependency libraries +# --quiet, --silent don't print informational messages +# --no-quiet, --no-silent +# print informational messages (default) +# --tag=TAG use configuration variables from tag TAG +# -v, --verbose print more informational messages than default +# --no-verbose don't print the extra informational messages +# --version print version information +# -h, --help, --help-all print short, long, or detailed help message +# +# MODE must be one of the following: +# +# clean remove files from the build directory +# compile compile a source file into a libtool object +# execute automatically set library path, then run a program +# finish complete the installation of libtool libraries +# install install libraries or executables +# link create a library or an executable +# uninstall remove libraries from an installed directory +# +# MODE-ARGS vary depending on the MODE. When passed as first option, +# `--mode=MODE' may be abbreviated as `MODE' or a unique abbreviation of that. +# Try `$progname --help --mode=MODE' for a more detailed description of MODE. +# +# When reporting a bug, please describe a test case to reproduce it and +# include the following information: +# +# host-triplet: $host +# shell: $SHELL +# compiler: $LTCC +# compiler flags: $LTCFLAGS +# linker: $LD (gnu? $with_gnu_ld) +# $progname: (GNU libtool) 2.4 Debian-2.4-4 +# automake: $automake_version +# autoconf: $autoconf_version +# +# Report bugs to . +# GNU libtool home page: . +# General help using GNU software: . + +PROGRAM=libtool +PACKAGE=libtool +VERSION="2.4 Debian-2.4-4" +TIMESTAMP="" +package_revision=1.3293 + +# Be Bourne compatible +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac +fi +BIN_SH=xpg4; export BIN_SH # for Tru64 +DUALCASE=1; export DUALCASE # for MKS sh + +# A function that is used when there is no print builtin or printf. +func_fallback_echo () +{ + eval 'cat <<_LTECHO_EOF +$1 +_LTECHO_EOF' +} + +# NLS nuisances: We save the old values to restore during execute mode. +lt_user_locale= +lt_safe_locale= +for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES +do + eval "if test \"\${$lt_var+set}\" = set; then + save_$lt_var=\$$lt_var + $lt_var=C + export $lt_var + lt_user_locale=\"$lt_var=\\\$save_\$lt_var; \$lt_user_locale\" + lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\" + fi" +done +LC_ALL=C +LANGUAGE=C +export LANGUAGE LC_ALL + +$lt_unset CDPATH + + +# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh +# is ksh but when the shell is invoked as "sh" and the current value of +# the _XPG environment variable is not equal to 1 (one), the special +# positional parameter $0, within a function call, is the name of the +# function. +progpath="$0" + + + +: ${CP="cp -f"} +test "${ECHO+set}" = set || ECHO=${as_echo-'printf %s\n'} +: ${EGREP="/bin/grep -E"} +: ${FGREP="/bin/grep -F"} +: ${GREP="/bin/grep"} +: ${LN_S="ln -s"} +: ${MAKE="make"} +: ${MKDIR="mkdir"} +: ${MV="mv -f"} +: ${RM="rm -f"} +: ${SED="/bin/sed"} +: ${SHELL="${CONFIG_SHELL-/bin/sh}"} +: ${Xsed="$SED -e 1s/^X//"} + +# Global variables: +EXIT_SUCCESS=0 +EXIT_FAILURE=1 +EXIT_MISMATCH=63 # $? = 63 is used to indicate version mismatch to missing. +EXIT_SKIP=77 # $? = 77 is used to indicate a skipped test to automake. + +exit_status=$EXIT_SUCCESS + +# Make sure IFS has a sensible default +lt_nl=' +' +IFS=" $lt_nl" + +dirname="s,/[^/]*$,," +basename="s,^.*/,," + +# func_dirname file append nondir_replacement +# Compute the dirname of FILE. If nonempty, add APPEND to the result, +# otherwise set result to NONDIR_REPLACEMENT. +func_dirname () +{ + func_dirname_result=`$ECHO "${1}" | $SED "$dirname"` + if test "X$func_dirname_result" = "X${1}"; then + func_dirname_result="${3}" + else + func_dirname_result="$func_dirname_result${2}" + fi +} # func_dirname may be replaced by extended shell implementation + + +# func_basename file +func_basename () +{ + func_basename_result=`$ECHO "${1}" | $SED "$basename"` +} # func_basename may be replaced by extended shell implementation + + +# func_dirname_and_basename file append nondir_replacement +# perform func_basename and func_dirname in a single function +# call: +# dirname: Compute the dirname of FILE. If nonempty, +# add APPEND to the result, otherwise set result +# to NONDIR_REPLACEMENT. +# value returned in "$func_dirname_result" +# basename: Compute filename of FILE. +# value retuned in "$func_basename_result" +# Implementation must be kept synchronized with func_dirname +# and func_basename. For efficiency, we do not delegate to +# those functions but instead duplicate the functionality here. +func_dirname_and_basename () +{ + # Extract subdirectory from the argument. + func_dirname_result=`$ECHO "${1}" | $SED -e "$dirname"` + if test "X$func_dirname_result" = "X${1}"; then + func_dirname_result="${3}" + else + func_dirname_result="$func_dirname_result${2}" + fi + func_basename_result=`$ECHO "${1}" | $SED -e "$basename"` +} # func_dirname_and_basename may be replaced by extended shell implementation + + +# func_stripname prefix suffix name +# strip PREFIX and SUFFIX off of NAME. +# PREFIX and SUFFIX must not contain globbing or regex special +# characters, hashes, percent signs, but SUFFIX may contain a leading +# dot (in which case that matches only a dot). +# func_strip_suffix prefix name +func_stripname () +{ + case ${2} in + .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;; + *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;; + esac +} # func_stripname may be replaced by extended shell implementation + + +# These SED scripts presuppose an absolute path with a trailing slash. +pathcar='s,^/\([^/]*\).*$,\1,' +pathcdr='s,^/[^/]*,,' +removedotparts=':dotsl + s@/\./@/@g + t dotsl + s,/\.$,/,' +collapseslashes='s@/\{1,\}@/@g' +finalslash='s,/*$,/,' + +# func_normal_abspath PATH +# Remove doubled-up and trailing slashes, "." path components, +# and cancel out any ".." path components in PATH after making +# it an absolute path. +# value returned in "$func_normal_abspath_result" +func_normal_abspath () +{ + # Start from root dir and reassemble the path. + func_normal_abspath_result= + func_normal_abspath_tpath=$1 + func_normal_abspath_altnamespace= + case $func_normal_abspath_tpath in + "") + # Empty path, that just means $cwd. + func_stripname '' '/' "`pwd`" + func_normal_abspath_result=$func_stripname_result + return + ;; + # The next three entries are used to spot a run of precisely + # two leading slashes without using negated character classes; + # we take advantage of case's first-match behaviour. + ///*) + # Unusual form of absolute path, do nothing. + ;; + //*) + # Not necessarily an ordinary path; POSIX reserves leading '//' + # and for example Cygwin uses it to access remote file shares + # over CIFS/SMB, so we conserve a leading double slash if found. + func_normal_abspath_altnamespace=/ + ;; + /*) + # Absolute path, do nothing. + ;; + *) + # Relative path, prepend $cwd. + func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath + ;; + esac + # Cancel out all the simple stuff to save iterations. We also want + # the path to end with a slash for ease of parsing, so make sure + # there is one (and only one) here. + func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \ + -e "$removedotparts" -e "$collapseslashes" -e "$finalslash"` + while :; do + # Processed it all yet? + if test "$func_normal_abspath_tpath" = / ; then + # If we ascended to the root using ".." the result may be empty now. + if test -z "$func_normal_abspath_result" ; then + func_normal_abspath_result=/ + fi + break + fi + func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \ + -e "$pathcar"` + func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \ + -e "$pathcdr"` + # Figure out what to do with it + case $func_normal_abspath_tcomponent in + "") + # Trailing empty path component, ignore it. + ;; + ..) + # Parent dir; strip last assembled component from result. + func_dirname "$func_normal_abspath_result" + func_normal_abspath_result=$func_dirname_result + ;; + *) + # Actual path component, append it. + func_normal_abspath_result=$func_normal_abspath_result/$func_normal_abspath_tcomponent + ;; + esac + done + # Restore leading double-slash if one was found on entry. + func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result +} + +# func_relative_path SRCDIR DSTDIR +# generates a relative path from SRCDIR to DSTDIR, with a trailing +# slash if non-empty, suitable for immediately appending a filename +# without needing to append a separator. +# value returned in "$func_relative_path_result" +func_relative_path () +{ + func_relative_path_result= + func_normal_abspath "$1" + func_relative_path_tlibdir=$func_normal_abspath_result + func_normal_abspath "$2" + func_relative_path_tbindir=$func_normal_abspath_result + + # Ascend the tree starting from libdir + while :; do + # check if we have found a prefix of bindir + case $func_relative_path_tbindir in + $func_relative_path_tlibdir) + # found an exact match + func_relative_path_tcancelled= + break + ;; + $func_relative_path_tlibdir*) + # found a matching prefix + func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir" + func_relative_path_tcancelled=$func_stripname_result + if test -z "$func_relative_path_result"; then + func_relative_path_result=. + fi + break + ;; + *) + func_dirname $func_relative_path_tlibdir + func_relative_path_tlibdir=${func_dirname_result} + if test "x$func_relative_path_tlibdir" = x ; then + # Have to descend all the way to the root! + func_relative_path_result=../$func_relative_path_result + func_relative_path_tcancelled=$func_relative_path_tbindir + break + fi + func_relative_path_result=../$func_relative_path_result + ;; + esac + done + + # Now calculate path; take care to avoid doubling-up slashes. + func_stripname '' '/' "$func_relative_path_result" + func_relative_path_result=$func_stripname_result + func_stripname '/' '/' "$func_relative_path_tcancelled" + if test "x$func_stripname_result" != x ; then + func_relative_path_result=${func_relative_path_result}/${func_stripname_result} + fi + + # Normalisation. If bindir is libdir, return empty string, + # else relative path ending with a slash; either way, target + # file name can be directly appended. + if test ! -z "$func_relative_path_result"; then + func_stripname './' '' "$func_relative_path_result/" + func_relative_path_result=$func_stripname_result + fi +} + +# The name of this program: +func_dirname_and_basename "$progpath" +progname=$func_basename_result + +# Make sure we have an absolute path for reexecution: +case $progpath in + [\\/]*|[A-Za-z]:\\*) ;; + *[\\/]*) + progdir=$func_dirname_result + progdir=`cd "$progdir" && pwd` + progpath="$progdir/$progname" + ;; + *) + save_IFS="$IFS" + IFS=: + for progdir in $PATH; do + IFS="$save_IFS" + test -x "$progdir/$progname" && break + done + IFS="$save_IFS" + test -n "$progdir" || progdir=`pwd` + progpath="$progdir/$progname" + ;; +esac + +# Sed substitution that helps us do robust quoting. It backslashifies +# metacharacters that are still active within double-quoted strings. +Xsed="${SED}"' -e 1s/^X//' +sed_quote_subst='s/\([`"$\\]\)/\\\1/g' + +# Same as above, but do not quote variable references. +double_quote_subst='s/\(["`\\]\)/\\\1/g' + +# Sed substitution that turns a string into a regex matching for the +# string literally. +sed_make_literal_regex='s,[].[^$\\*\/],\\&,g' + +# Sed substitution that converts a w32 file name or path +# which contains forward slashes, into one that contains +# (escaped) backslashes. A very naive implementation. +lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g' + +# Re-`\' parameter expansions in output of double_quote_subst that were +# `\'-ed in input to the same. If an odd number of `\' preceded a '$' +# in input to double_quote_subst, that '$' was protected from expansion. +# Since each input `\' is now two `\'s, look for any number of runs of +# four `\'s followed by two `\'s and then a '$'. `\' that '$'. +bs='\\' +bs2='\\\\' +bs4='\\\\\\\\' +dollar='\$' +sed_double_backslash="\ + s/$bs4/&\\ +/g + s/^$bs2$dollar/$bs&/ + s/\\([^$bs]\\)$bs2$dollar/\\1$bs2$bs$dollar/g + s/\n//g" + +# Standard options: +opt_dry_run=false +opt_help=false +opt_quiet=false +opt_verbose=false +opt_warning=: + +# func_echo arg... +# Echo program name prefixed message, along with the current mode +# name if it has been set yet. +func_echo () +{ + $ECHO "$progname: ${opt_mode+$opt_mode: }$*" +} + +# func_verbose arg... +# Echo program name prefixed message in verbose mode only. +func_verbose () +{ + $opt_verbose && func_echo ${1+"$@"} + + # A bug in bash halts the script if the last line of a function + # fails when set -e is in force, so we need another command to + # work around that: + : +} + +# func_echo_all arg... +# Invoke $ECHO with all args, space-separated. +func_echo_all () +{ + $ECHO "$*" +} + +# func_error arg... +# Echo program name prefixed message to standard error. +func_error () +{ + $ECHO "$progname: ${opt_mode+$opt_mode: }"${1+"$@"} 1>&2 +} + +# func_warning arg... +# Echo program name prefixed warning message to standard error. +func_warning () +{ + $opt_warning && $ECHO "$progname: ${opt_mode+$opt_mode: }warning: "${1+"$@"} 1>&2 + + # bash bug again: + : +} + +# func_fatal_error arg... +# Echo program name prefixed message to standard error, and exit. +func_fatal_error () +{ + func_error ${1+"$@"} + exit $EXIT_FAILURE +} + +# func_fatal_help arg... +# Echo program name prefixed message to standard error, followed by +# a help hint, and exit. +func_fatal_help () +{ + func_error ${1+"$@"} + func_fatal_error "$help" +} +help="Try \`$progname --help' for more information." ## default + + +# func_grep expression filename +# Check whether EXPRESSION matches any line of FILENAME, without output. +func_grep () +{ + $GREP "$1" "$2" >/dev/null 2>&1 +} + + +# func_mkdir_p directory-path +# Make sure the entire path to DIRECTORY-PATH is available. +func_mkdir_p () +{ + my_directory_path="$1" + my_dir_list= + + if test -n "$my_directory_path" && test "$opt_dry_run" != ":"; then + + # Protect directory names starting with `-' + case $my_directory_path in + -*) my_directory_path="./$my_directory_path" ;; + esac + + # While some portion of DIR does not yet exist... + while test ! -d "$my_directory_path"; do + # ...make a list in topmost first order. Use a colon delimited + # list incase some portion of path contains whitespace. + my_dir_list="$my_directory_path:$my_dir_list" + + # If the last portion added has no slash in it, the list is done + case $my_directory_path in */*) ;; *) break ;; esac + + # ...otherwise throw away the child directory and loop + my_directory_path=`$ECHO "$my_directory_path" | $SED -e "$dirname"` + done + my_dir_list=`$ECHO "$my_dir_list" | $SED 's,:*$,,'` + + save_mkdir_p_IFS="$IFS"; IFS=':' + for my_dir in $my_dir_list; do + IFS="$save_mkdir_p_IFS" + # mkdir can fail with a `File exist' error if two processes + # try to create one of the directories concurrently. Don't + # stop in that case! + $MKDIR "$my_dir" 2>/dev/null || : + done + IFS="$save_mkdir_p_IFS" + + # Bail out if we (or some other process) failed to create a directory. + test -d "$my_directory_path" || \ + func_fatal_error "Failed to create \`$1'" + fi +} + + +# func_mktempdir [string] +# Make a temporary directory that won't clash with other running +# libtool processes, and avoids race conditions if possible. If +# given, STRING is the basename for that directory. +func_mktempdir () +{ + my_template="${TMPDIR-/tmp}/${1-$progname}" + + if test "$opt_dry_run" = ":"; then + # Return a directory name, but don't create it in dry-run mode + my_tmpdir="${my_template}-$$" + else + + # If mktemp works, use that first and foremost + my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null` + + if test ! -d "$my_tmpdir"; then + # Failing that, at least try and use $RANDOM to avoid a race + my_tmpdir="${my_template}-${RANDOM-0}$$" + + save_mktempdir_umask=`umask` + umask 0077 + $MKDIR "$my_tmpdir" + umask $save_mktempdir_umask + fi + + # If we're not in dry-run mode, bomb out on failure + test -d "$my_tmpdir" || \ + func_fatal_error "cannot create temporary directory \`$my_tmpdir'" + fi + + $ECHO "$my_tmpdir" +} + + +# func_quote_for_eval arg +# Aesthetically quote ARG to be evaled later. +# This function returns two values: FUNC_QUOTE_FOR_EVAL_RESULT +# is double-quoted, suitable for a subsequent eval, whereas +# FUNC_QUOTE_FOR_EVAL_UNQUOTED_RESULT has merely all characters +# which are still active within double quotes backslashified. +func_quote_for_eval () +{ + case $1 in + *[\\\`\"\$]*) + func_quote_for_eval_unquoted_result=`$ECHO "$1" | $SED "$sed_quote_subst"` ;; + *) + func_quote_for_eval_unquoted_result="$1" ;; + esac + + case $func_quote_for_eval_unquoted_result in + # Double-quote args containing shell metacharacters to delay + # word splitting, command substitution and and variable + # expansion for a subsequent eval. + # Many Bourne shells cannot handle close brackets correctly + # in scan sets, so we specify it separately. + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + func_quote_for_eval_result="\"$func_quote_for_eval_unquoted_result\"" + ;; + *) + func_quote_for_eval_result="$func_quote_for_eval_unquoted_result" + esac +} + + +# func_quote_for_expand arg +# Aesthetically quote ARG to be evaled later; same as above, +# but do not quote variable references. +func_quote_for_expand () +{ + case $1 in + *[\\\`\"]*) + my_arg=`$ECHO "$1" | $SED \ + -e "$double_quote_subst" -e "$sed_double_backslash"` ;; + *) + my_arg="$1" ;; + esac + + case $my_arg in + # Double-quote args containing shell metacharacters to delay + # word splitting and command substitution for a subsequent eval. + # Many Bourne shells cannot handle close brackets correctly + # in scan sets, so we specify it separately. + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + my_arg="\"$my_arg\"" + ;; + esac + + func_quote_for_expand_result="$my_arg" +} + + +# func_show_eval cmd [fail_exp] +# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is +# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP +# is given, then evaluate it. +func_show_eval () +{ + my_cmd="$1" + my_fail_exp="${2-:}" + + ${opt_silent-false} || { + func_quote_for_expand "$my_cmd" + eval "func_echo $func_quote_for_expand_result" + } + + if ${opt_dry_run-false}; then :; else + eval "$my_cmd" + my_status=$? + if test "$my_status" -eq 0; then :; else + eval "(exit $my_status); $my_fail_exp" + fi + fi +} + + +# func_show_eval_locale cmd [fail_exp] +# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is +# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP +# is given, then evaluate it. Use the saved locale for evaluation. +func_show_eval_locale () +{ + my_cmd="$1" + my_fail_exp="${2-:}" + + ${opt_silent-false} || { + func_quote_for_expand "$my_cmd" + eval "func_echo $func_quote_for_expand_result" + } + + if ${opt_dry_run-false}; then :; else + eval "$lt_user_locale + $my_cmd" + my_status=$? + eval "$lt_safe_locale" + if test "$my_status" -eq 0; then :; else + eval "(exit $my_status); $my_fail_exp" + fi + fi +} + +# func_tr_sh +# Turn $1 into a string suitable for a shell variable name. +# Result is stored in $func_tr_sh_result. All characters +# not in the set a-zA-Z0-9_ are replaced with '_'. Further, +# if $1 begins with a digit, a '_' is prepended as well. +func_tr_sh () +{ + case $1 in + [0-9]* | *[!a-zA-Z0-9_]*) + func_tr_sh_result=`$ECHO "$1" | $SED 's/^\([0-9]\)/_\1/; s/[^a-zA-Z0-9_]/_/g'` + ;; + * ) + func_tr_sh_result=$1 + ;; + esac +} + + +# func_version +# Echo version message to standard output and exit. +func_version () +{ + $opt_debug + + $SED -n '/(C)/!b go + :more + /\./!{ + N + s/\n# / / + b more + } + :go + /^# '$PROGRAM' (GNU /,/# warranty; / { + s/^# // + s/^# *$// + s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/ + p + }' < "$progpath" + exit $? +} + +# func_usage +# Echo short help message to standard output and exit. +func_usage () +{ + $opt_debug + + $SED -n '/^# Usage:/,/^# *.*--help/ { + s/^# // + s/^# *$// + s/\$progname/'$progname'/ + p + }' < "$progpath" + echo + $ECHO "run \`$progname --help | more' for full usage" + exit $? +} + +# func_help [NOEXIT] +# Echo long help message to standard output and exit, +# unless 'noexit' is passed as argument. +func_help () +{ + $opt_debug + + $SED -n '/^# Usage:/,/# Report bugs to/ { + :print + s/^# // + s/^# *$// + s*\$progname*'$progname'* + s*\$host*'"$host"'* + s*\$SHELL*'"$SHELL"'* + s*\$LTCC*'"$LTCC"'* + s*\$LTCFLAGS*'"$LTCFLAGS"'* + s*\$LD*'"$LD"'* + s/\$with_gnu_ld/'"$with_gnu_ld"'/ + s/\$automake_version/'"`(automake --version) 2>/dev/null |$SED 1q`"'/ + s/\$autoconf_version/'"`(autoconf --version) 2>/dev/null |$SED 1q`"'/ + p + d + } + /^# .* home page:/b print + /^# General help using/b print + ' < "$progpath" + ret=$? + if test -z "$1"; then + exit $ret + fi +} + +# func_missing_arg argname +# Echo program name prefixed message to standard error and set global +# exit_cmd. +func_missing_arg () +{ + $opt_debug + + func_error "missing argument for $1." + exit_cmd=exit +} + + +# func_split_short_opt shortopt +# Set func_split_short_opt_name and func_split_short_opt_arg shell +# variables after splitting SHORTOPT after the 2nd character. +func_split_short_opt () +{ + my_sed_short_opt='1s/^\(..\).*$/\1/;q' + my_sed_short_rest='1s/^..\(.*\)$/\1/;q' + + func_split_short_opt_name=`$ECHO "$1" | $SED "$my_sed_short_opt"` + func_split_short_opt_arg=`$ECHO "$1" | $SED "$my_sed_short_rest"` +} # func_split_short_opt may be replaced by extended shell implementation + + +# func_split_long_opt longopt +# Set func_split_long_opt_name and func_split_long_opt_arg shell +# variables after splitting LONGOPT at the `=' sign. +func_split_long_opt () +{ + my_sed_long_opt='1s/^\(--[^=]*\)=.*/\1/;q' + my_sed_long_arg='1s/^--[^=]*=//' + + func_split_long_opt_name=`$ECHO "$1" | $SED "$my_sed_long_opt"` + func_split_long_opt_arg=`$ECHO "$1" | $SED "$my_sed_long_arg"` +} # func_split_long_opt may be replaced by extended shell implementation + +exit_cmd=: + + + + + +magic="%%%MAGIC variable%%%" +magic_exe="%%%MAGIC EXE variable%%%" + +# Global variables. +nonopt= +preserve_args= +lo2o="s/\\.lo\$/.${objext}/" +o2lo="s/\\.${objext}\$/.lo/" +extracted_archives= +extracted_serial=0 + +# If this variable is set in any of the actions, the command in it +# will be execed at the end. This prevents here-documents from being +# left over by shells. +exec_cmd= + +# func_append var value +# Append VALUE to the end of shell variable VAR. +func_append () +{ + eval "${1}=\$${1}\${2}" +} # func_append may be replaced by extended shell implementation + +# func_append_quoted var value +# Quote VALUE and append to the end of shell variable VAR, separated +# by a space. +func_append_quoted () +{ + func_quote_for_eval "${2}" + eval "${1}=\$${1}\\ \$func_quote_for_eval_result" +} # func_append_quoted may be replaced by extended shell implementation + + +# func_arith arithmetic-term... +func_arith () +{ + func_arith_result=`expr "${@}"` +} # func_arith may be replaced by extended shell implementation + + +# func_len string +# STRING may not start with a hyphen. +func_len () +{ + func_len_result=`expr "${1}" : ".*" 2>/dev/null || echo $max_cmd_len` +} # func_len may be replaced by extended shell implementation + + +# func_lo2o object +func_lo2o () +{ + func_lo2o_result=`$ECHO "${1}" | $SED "$lo2o"` +} # func_lo2o may be replaced by extended shell implementation + + +# func_xform libobj-or-source +func_xform () +{ + func_xform_result=`$ECHO "${1}" | $SED 's/\.[^.]*$/.lo/'` +} # func_xform may be replaced by extended shell implementation + + +# func_fatal_configuration arg... +# Echo program name prefixed message to standard error, followed by +# a configuration failure hint, and exit. +func_fatal_configuration () +{ + func_error ${1+"$@"} + func_error "See the $PACKAGE documentation for more information." + func_fatal_error "Fatal configuration error." +} + + +# func_config +# Display the configuration for all the tags in this script. +func_config () +{ + re_begincf='^# ### BEGIN LIBTOOL' + re_endcf='^# ### END LIBTOOL' + + # Default configuration. + $SED "1,/$re_begincf CONFIG/d;/$re_endcf CONFIG/,\$d" < "$progpath" + + # Now print the configurations for the tags. + for tagname in $taglist; do + $SED -n "/$re_begincf TAG CONFIG: $tagname\$/,/$re_endcf TAG CONFIG: $tagname\$/p" < "$progpath" + done + + exit $? +} + +# func_features +# Display the features supported by this script. +func_features () +{ + echo "host: $host" + if test "$build_libtool_libs" = yes; then + echo "enable shared libraries" + else + echo "disable shared libraries" + fi + if test "$build_old_libs" = yes; then + echo "enable static libraries" + else + echo "disable static libraries" + fi + + exit $? +} + +# func_enable_tag tagname +# Verify that TAGNAME is valid, and either flag an error and exit, or +# enable the TAGNAME tag. We also add TAGNAME to the global $taglist +# variable here. +func_enable_tag () +{ + # Global variable: + tagname="$1" + + re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$" + re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$" + sed_extractcf="/$re_begincf/,/$re_endcf/p" + + # Validate tagname. + case $tagname in + *[!-_A-Za-z0-9,/]*) + func_fatal_error "invalid tag name: $tagname" + ;; + esac + + # Don't test for the "default" C tag, as we know it's + # there but not specially marked. + case $tagname in + CC) ;; + *) + if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then + taglist="$taglist $tagname" + + # Evaluate the configuration. Be careful to quote the path + # and the sed script, to avoid splitting on whitespace, but + # also don't use non-portable quotes within backquotes within + # quotes we have to do it in 2 steps: + extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"` + eval "$extractedcf" + else + func_error "ignoring unknown tag $tagname" + fi + ;; + esac +} + +# func_check_version_match +# Ensure that we are using m4 macros, and libtool script from the same +# release of libtool. +func_check_version_match () +{ + if test "$package_revision" != "$macro_revision"; then + if test "$VERSION" != "$macro_version"; then + if test -z "$macro_version"; then + cat >&2 <<_LT_EOF +$progname: Version mismatch error. This is $PACKAGE $VERSION, but the +$progname: definition of this LT_INIT comes from an older release. +$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION +$progname: and run autoconf again. +_LT_EOF + else + cat >&2 <<_LT_EOF +$progname: Version mismatch error. This is $PACKAGE $VERSION, but the +$progname: definition of this LT_INIT comes from $PACKAGE $macro_version. +$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION +$progname: and run autoconf again. +_LT_EOF + fi + else + cat >&2 <<_LT_EOF +$progname: Version mismatch error. This is $PACKAGE $VERSION, revision $package_revision, +$progname: but the definition of this LT_INIT comes from revision $macro_revision. +$progname: You should recreate aclocal.m4 with macros from revision $package_revision +$progname: of $PACKAGE $VERSION and run autoconf again. +_LT_EOF + fi + + exit $EXIT_MISMATCH + fi +} + + +# Shorthand for --mode=foo, only valid as the first argument +case $1 in +clean|clea|cle|cl) + shift; set dummy --mode clean ${1+"$@"}; shift + ;; +compile|compil|compi|comp|com|co|c) + shift; set dummy --mode compile ${1+"$@"}; shift + ;; +execute|execut|execu|exec|exe|ex|e) + shift; set dummy --mode execute ${1+"$@"}; shift + ;; +finish|finis|fini|fin|fi|f) + shift; set dummy --mode finish ${1+"$@"}; shift + ;; +install|instal|insta|inst|ins|in|i) + shift; set dummy --mode install ${1+"$@"}; shift + ;; +link|lin|li|l) + shift; set dummy --mode link ${1+"$@"}; shift + ;; +uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u) + shift; set dummy --mode uninstall ${1+"$@"}; shift + ;; +esac + + + +# Option defaults: +opt_debug=: +opt_dry_run=false +opt_config=false +opt_preserve_dup_deps=false +opt_features=false +opt_finish=false +opt_help=false +opt_help_all=false +opt_silent=: +opt_verbose=: +opt_silent=false +opt_verbose=false + + +# Parse options once, thoroughly. This comes as soon as possible in the +# script to make things like `--version' happen as quickly as we can. +{ + # this just eases exit handling + while test $# -gt 0; do + opt="$1" + shift + case $opt in + --debug|-x) opt_debug='set -x' + func_echo "enabling shell trace mode" + $opt_debug + ;; + --dry-run|--dryrun|-n) + opt_dry_run=: + ;; + --config) + opt_config=: +func_config + ;; + --dlopen|-dlopen) + optarg="$1" + opt_dlopen="${opt_dlopen+$opt_dlopen +}$optarg" + shift + ;; + --preserve-dup-deps) + opt_preserve_dup_deps=: + ;; + --features) + opt_features=: +func_features + ;; + --finish) + opt_finish=: +set dummy --mode finish ${1+"$@"}; shift + ;; + --help) + opt_help=: + ;; + --help-all) + opt_help_all=: +opt_help=': help-all' + ;; + --mode) + test $# = 0 && func_missing_arg $opt && break + optarg="$1" + opt_mode="$optarg" +case $optarg in + # Valid mode arguments: + clean|compile|execute|finish|install|link|relink|uninstall) ;; + + # Catch anything else as an error + *) func_error "invalid argument for $opt" + exit_cmd=exit + break + ;; +esac + shift + ;; + --no-silent|--no-quiet) + opt_silent=false +func_append preserve_args " $opt" + ;; + --no-verbose) + opt_verbose=false +func_append preserve_args " $opt" + ;; + --silent|--quiet) + opt_silent=: +func_append preserve_args " $opt" + opt_verbose=false + ;; + --verbose|-v) + opt_verbose=: +func_append preserve_args " $opt" +opt_silent=false + ;; + --tag) + test $# = 0 && func_missing_arg $opt && break + optarg="$1" + opt_tag="$optarg" +func_append preserve_args " $opt $optarg" +func_enable_tag "$optarg" + shift + ;; + + -\?|-h) func_usage ;; + --help) func_help ;; + --version) func_version ;; + + # Separate optargs to long options: + --*=*) + func_split_long_opt "$opt" + set dummy "$func_split_long_opt_name" "$func_split_long_opt_arg" ${1+"$@"} + shift + ;; + + # Separate non-argument short options: + -\?*|-h*|-n*|-v*) + func_split_short_opt "$opt" + set dummy "$func_split_short_opt_name" "-$func_split_short_opt_arg" ${1+"$@"} + shift + ;; + + --) break ;; + -*) func_fatal_help "unrecognized option \`$opt'" ;; + *) set dummy "$opt" ${1+"$@"}; shift; break ;; + esac + done + + # Validate options: + + # save first non-option argument + if test "$#" -gt 0; then + nonopt="$opt" + shift + fi + + # preserve --debug + test "$opt_debug" = : || func_append preserve_args " --debug" + + case $host in + *cygwin* | *mingw* | *pw32* | *cegcc*) + # don't eliminate duplications in $postdeps and $predeps + opt_duplicate_compiler_generated_deps=: + ;; + *) + opt_duplicate_compiler_generated_deps=$opt_preserve_dup_deps + ;; + esac + + $opt_help || { + # Sanity checks first: + func_check_version_match + + if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then + func_fatal_configuration "not configured to build any kind of library" + fi + + # Darwin sucks + eval std_shrext=\"$shrext_cmds\" + + # Only execute mode is allowed to have -dlopen flags. + if test -n "$opt_dlopen" && test "$opt_mode" != execute; then + func_error "unrecognized option \`-dlopen'" + $ECHO "$help" 1>&2 + exit $EXIT_FAILURE + fi + + # Change the help message to a mode-specific one. + generic_help="$help" + help="Try \`$progname --help --mode=$opt_mode' for more information." + } + + + # Bail if the options were screwed + $exit_cmd $EXIT_FAILURE +} + + + + +## ----------- ## +## Main. ## +## ----------- ## + +# func_lalib_p file +# True iff FILE is a libtool `.la' library or `.lo' object file. +# This function is only a basic sanity check; it will hardly flush out +# determined imposters. +func_lalib_p () +{ + test -f "$1" && + $SED -e 4q "$1" 2>/dev/null \ + | $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1 +} + +# func_lalib_unsafe_p file +# True iff FILE is a libtool `.la' library or `.lo' object file. +# This function implements the same check as func_lalib_p without +# resorting to external programs. To this end, it redirects stdin and +# closes it afterwards, without saving the original file descriptor. +# As a safety measure, use it only where a negative result would be +# fatal anyway. Works if `file' does not exist. +func_lalib_unsafe_p () +{ + lalib_p=no + if test -f "$1" && test -r "$1" && exec 5<&0 <"$1"; then + for lalib_p_l in 1 2 3 4 + do + read lalib_p_line + case "$lalib_p_line" in + \#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;; + esac + done + exec 0<&5 5<&- + fi + test "$lalib_p" = yes +} + +# func_ltwrapper_script_p file +# True iff FILE is a libtool wrapper script +# This function is only a basic sanity check; it will hardly flush out +# determined imposters. +func_ltwrapper_script_p () +{ + func_lalib_p "$1" +} + +# func_ltwrapper_executable_p file +# True iff FILE is a libtool wrapper executable +# This function is only a basic sanity check; it will hardly flush out +# determined imposters. +func_ltwrapper_executable_p () +{ + func_ltwrapper_exec_suffix= + case $1 in + *.exe) ;; + *) func_ltwrapper_exec_suffix=.exe ;; + esac + $GREP "$magic_exe" "$1$func_ltwrapper_exec_suffix" >/dev/null 2>&1 +} + +# func_ltwrapper_scriptname file +# Assumes file is an ltwrapper_executable +# uses $file to determine the appropriate filename for a +# temporary ltwrapper_script. +func_ltwrapper_scriptname () +{ + func_dirname_and_basename "$1" "" "." + func_stripname '' '.exe' "$func_basename_result" + func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper" +} + +# func_ltwrapper_p file +# True iff FILE is a libtool wrapper script or wrapper executable +# This function is only a basic sanity check; it will hardly flush out +# determined imposters. +func_ltwrapper_p () +{ + func_ltwrapper_script_p "$1" || func_ltwrapper_executable_p "$1" +} + + +# func_execute_cmds commands fail_cmd +# Execute tilde-delimited COMMANDS. +# If FAIL_CMD is given, eval that upon failure. +# FAIL_CMD may read-access the current command in variable CMD! +func_execute_cmds () +{ + $opt_debug + save_ifs=$IFS; IFS='~' + for cmd in $1; do + IFS=$save_ifs + eval cmd=\"$cmd\" + func_show_eval "$cmd" "${2-:}" + done + IFS=$save_ifs +} + + +# func_source file +# Source FILE, adding directory component if necessary. +# Note that it is not necessary on cygwin/mingw to append a dot to +# FILE even if both FILE and FILE.exe exist: automatic-append-.exe +# behavior happens only for exec(3), not for open(2)! Also, sourcing +# `FILE.' does not work on cygwin managed mounts. +func_source () +{ + $opt_debug + case $1 in + */* | *\\*) . "$1" ;; + *) . "./$1" ;; + esac +} + + +# func_resolve_sysroot PATH +# Replace a leading = in PATH with a sysroot. Store the result into +# func_resolve_sysroot_result +func_resolve_sysroot () +{ + func_resolve_sysroot_result=$1 + case $func_resolve_sysroot_result in + =*) + func_stripname '=' '' "$func_resolve_sysroot_result" + func_resolve_sysroot_result=$lt_sysroot$func_stripname_result + ;; + esac +} + +# func_replace_sysroot PATH +# If PATH begins with the sysroot, replace it with = and +# store the result into func_replace_sysroot_result. +func_replace_sysroot () +{ + case "$lt_sysroot:$1" in + ?*:"$lt_sysroot"*) + func_stripname "$lt_sysroot" '' "$1" + func_replace_sysroot_result="=$func_stripname_result" + ;; + *) + # Including no sysroot. + func_replace_sysroot_result=$1 + ;; + esac +} + +# func_infer_tag arg +# Infer tagged configuration to use if any are available and +# if one wasn't chosen via the "--tag" command line option. +# Only attempt this if the compiler in the base compile +# command doesn't match the default compiler. +# arg is usually of the form 'gcc ...' +func_infer_tag () +{ + $opt_debug + if test -n "$available_tags" && test -z "$tagname"; then + CC_quoted= + for arg in $CC; do + func_append_quoted CC_quoted "$arg" + done + CC_expanded=`func_echo_all $CC` + CC_quoted_expanded=`func_echo_all $CC_quoted` + case $@ in + # Blanks in the command may have been stripped by the calling shell, + # but not from the CC environment variable when configure was run. + " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \ + " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) ;; + # Blanks at the start of $base_compile will cause this to fail + # if we don't check for them as well. + *) + for z in $available_tags; do + if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then + # Evaluate the configuration. + eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`" + CC_quoted= + for arg in $CC; do + # Double-quote args containing other shell metacharacters. + func_append_quoted CC_quoted "$arg" + done + CC_expanded=`func_echo_all $CC` + CC_quoted_expanded=`func_echo_all $CC_quoted` + case "$@ " in + " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \ + " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) + # The compiler in the base compile command matches + # the one in the tagged configuration. + # Assume this is the tagged configuration we want. + tagname=$z + break + ;; + esac + fi + done + # If $tagname still isn't set, then no tagged configuration + # was found and let the user know that the "--tag" command + # line option must be used. + if test -z "$tagname"; then + func_echo "unable to infer tagged configuration" + func_fatal_error "specify a tag with \`--tag'" +# else +# func_verbose "using $tagname tagged configuration" + fi + ;; + esac + fi +} + + + +# func_write_libtool_object output_name pic_name nonpic_name +# Create a libtool object file (analogous to a ".la" file), +# but don't create it if we're doing a dry run. +func_write_libtool_object () +{ + write_libobj=${1} + if test "$build_libtool_libs" = yes; then + write_lobj=\'${2}\' + else + write_lobj=none + fi + + if test "$build_old_libs" = yes; then + write_oldobj=\'${3}\' + else + write_oldobj=none + fi + + $opt_dry_run || { + cat >${write_libobj}T </dev/null` + if test "$?" -eq 0 && test -n "${func_convert_core_file_wine_to_w32_tmp}"; then + func_convert_core_file_wine_to_w32_result=`$ECHO "$func_convert_core_file_wine_to_w32_tmp" | + $SED -e "$lt_sed_naive_backslashify"` + else + func_convert_core_file_wine_to_w32_result= + fi + fi +} +# end: func_convert_core_file_wine_to_w32 + + +# func_convert_core_path_wine_to_w32 ARG +# Helper function used by path conversion functions when $build is *nix, and +# $host is mingw, cygwin, or some other w32 environment. Relies on a correctly +# configured wine environment available, with the winepath program in $build's +# $PATH. Assumes ARG has no leading or trailing path separator characters. +# +# ARG is path to be converted from $build format to win32. +# Result is available in $func_convert_core_path_wine_to_w32_result. +# Unconvertible file (directory) names in ARG are skipped; if no directory names +# are convertible, then the result may be empty. +func_convert_core_path_wine_to_w32 () +{ + $opt_debug + # unfortunately, winepath doesn't convert paths, only file names + func_convert_core_path_wine_to_w32_result="" + if test -n "$1"; then + oldIFS=$IFS + IFS=: + for func_convert_core_path_wine_to_w32_f in $1; do + IFS=$oldIFS + func_convert_core_file_wine_to_w32 "$func_convert_core_path_wine_to_w32_f" + if test -n "$func_convert_core_file_wine_to_w32_result" ; then + if test -z "$func_convert_core_path_wine_to_w32_result"; then + func_convert_core_path_wine_to_w32_result="$func_convert_core_file_wine_to_w32_result" + else + func_append func_convert_core_path_wine_to_w32_result ";$func_convert_core_file_wine_to_w32_result" + fi + fi + done + IFS=$oldIFS + fi +} +# end: func_convert_core_path_wine_to_w32 + + +# func_cygpath ARGS... +# Wrapper around calling the cygpath program via LT_CYGPATH. This is used when +# when (1) $build is *nix and Cygwin is hosted via a wine environment; or (2) +# $build is MSYS and $host is Cygwin, or (3) $build is Cygwin. In case (1) or +# (2), returns the Cygwin file name or path in func_cygpath_result (input +# file name or path is assumed to be in w32 format, as previously converted +# from $build's *nix or MSYS format). In case (3), returns the w32 file name +# or path in func_cygpath_result (input file name or path is assumed to be in +# Cygwin format). Returns an empty string on error. +# +# ARGS are passed to cygpath, with the last one being the file name or path to +# be converted. +# +# Specify the absolute *nix (or w32) name to cygpath in the LT_CYGPATH +# environment variable; do not put it in $PATH. +func_cygpath () +{ + $opt_debug + if test -n "$LT_CYGPATH" && test -f "$LT_CYGPATH"; then + func_cygpath_result=`$LT_CYGPATH "$@" 2>/dev/null` + if test "$?" -ne 0; then + # on failure, ensure result is empty + func_cygpath_result= + fi + else + func_cygpath_result= + func_error "LT_CYGPATH is empty or specifies non-existent file: \`$LT_CYGPATH'" + fi +} +#end: func_cygpath + + +# func_convert_core_msys_to_w32 ARG +# Convert file name or path ARG from MSYS format to w32 format. Return +# result in func_convert_core_msys_to_w32_result. +func_convert_core_msys_to_w32 () +{ + $opt_debug + # awkward: cmd appends spaces to result + func_convert_core_msys_to_w32_result=`( cmd //c echo "$1" ) 2>/dev/null | + $SED -e 's/[ ]*$//' -e "$lt_sed_naive_backslashify"` +} +#end: func_convert_core_msys_to_w32 + + +# func_convert_file_check ARG1 ARG2 +# Verify that ARG1 (a file name in $build format) was converted to $host +# format in ARG2. Otherwise, emit an error message, but continue (resetting +# func_to_host_file_result to ARG1). +func_convert_file_check () +{ + $opt_debug + if test -z "$2" && test -n "$1" ; then + func_error "Could not determine host file name corresponding to" + func_error " \`$1'" + func_error "Continuing, but uninstalled executables may not work." + # Fallback: + func_to_host_file_result="$1" + fi +} +# end func_convert_file_check + + +# func_convert_path_check FROM_PATHSEP TO_PATHSEP FROM_PATH TO_PATH +# Verify that FROM_PATH (a path in $build format) was converted to $host +# format in TO_PATH. Otherwise, emit an error message, but continue, resetting +# func_to_host_file_result to a simplistic fallback value (see below). +func_convert_path_check () +{ + $opt_debug + if test -z "$4" && test -n "$3"; then + func_error "Could not determine the host path corresponding to" + func_error " \`$3'" + func_error "Continuing, but uninstalled executables may not work." + # Fallback. This is a deliberately simplistic "conversion" and + # should not be "improved". See libtool.info. + if test "x$1" != "x$2"; then + lt_replace_pathsep_chars="s|$1|$2|g" + func_to_host_path_result=`echo "$3" | + $SED -e "$lt_replace_pathsep_chars"` + else + func_to_host_path_result="$3" + fi + fi +} +# end func_convert_path_check + + +# func_convert_path_front_back_pathsep FRONTPAT BACKPAT REPL ORIG +# Modifies func_to_host_path_result by prepending REPL if ORIG matches FRONTPAT +# and appending REPL if ORIG matches BACKPAT. +func_convert_path_front_back_pathsep () +{ + $opt_debug + case $4 in + $1 ) func_to_host_path_result="$3$func_to_host_path_result" + ;; + esac + case $4 in + $2 ) func_append func_to_host_path_result "$3" + ;; + esac +} +# end func_convert_path_front_back_pathsep + + +################################################## +# $build to $host FILE NAME CONVERSION FUNCTIONS # +################################################## +# invoked via `$to_host_file_cmd ARG' +# +# In each case, ARG is the path to be converted from $build to $host format. +# Result will be available in $func_to_host_file_result. + + +# func_to_host_file ARG +# Converts the file name ARG from $build format to $host format. Return result +# in func_to_host_file_result. +func_to_host_file () +{ + $opt_debug + $to_host_file_cmd "$1" +} +# end func_to_host_file + + +# func_to_tool_file ARG LAZY +# converts the file name ARG from $build format to toolchain format. Return +# result in func_to_tool_file_result. If the conversion in use is listed +# in (the comma separated) LAZY, no conversion takes place. +func_to_tool_file () +{ + $opt_debug + case ,$2, in + *,"$to_tool_file_cmd",*) + func_to_tool_file_result=$1 + ;; + *) + $to_tool_file_cmd "$1" + func_to_tool_file_result=$func_to_host_file_result + ;; + esac +} +# end func_to_tool_file + + +# func_convert_file_noop ARG +# Copy ARG to func_to_host_file_result. +func_convert_file_noop () +{ + func_to_host_file_result="$1" +} +# end func_convert_file_noop + + +# func_convert_file_msys_to_w32 ARG +# Convert file name ARG from (mingw) MSYS to (mingw) w32 format; automatic +# conversion to w32 is not available inside the cwrapper. Returns result in +# func_to_host_file_result. +func_convert_file_msys_to_w32 () +{ + $opt_debug + func_to_host_file_result="$1" + if test -n "$1"; then + func_convert_core_msys_to_w32 "$1" + func_to_host_file_result="$func_convert_core_msys_to_w32_result" + fi + func_convert_file_check "$1" "$func_to_host_file_result" +} +# end func_convert_file_msys_to_w32 + + +# func_convert_file_cygwin_to_w32 ARG +# Convert file name ARG from Cygwin to w32 format. Returns result in +# func_to_host_file_result. +func_convert_file_cygwin_to_w32 () +{ + $opt_debug + func_to_host_file_result="$1" + if test -n "$1"; then + # because $build is cygwin, we call "the" cygpath in $PATH; no need to use + # LT_CYGPATH in this case. + func_to_host_file_result=`cygpath -m "$1"` + fi + func_convert_file_check "$1" "$func_to_host_file_result" +} +# end func_convert_file_cygwin_to_w32 + + +# func_convert_file_nix_to_w32 ARG +# Convert file name ARG from *nix to w32 format. Requires a wine environment +# and a working winepath. Returns result in func_to_host_file_result. +func_convert_file_nix_to_w32 () +{ + $opt_debug + func_to_host_file_result="$1" + if test -n "$1"; then + func_convert_core_file_wine_to_w32 "$1" + func_to_host_file_result="$func_convert_core_file_wine_to_w32_result" + fi + func_convert_file_check "$1" "$func_to_host_file_result" +} +# end func_convert_file_nix_to_w32 + + +# func_convert_file_msys_to_cygwin ARG +# Convert file name ARG from MSYS to Cygwin format. Requires LT_CYGPATH set. +# Returns result in func_to_host_file_result. +func_convert_file_msys_to_cygwin () +{ + $opt_debug + func_to_host_file_result="$1" + if test -n "$1"; then + func_convert_core_msys_to_w32 "$1" + func_cygpath -u "$func_convert_core_msys_to_w32_result" + func_to_host_file_result="$func_cygpath_result" + fi + func_convert_file_check "$1" "$func_to_host_file_result" +} +# end func_convert_file_msys_to_cygwin + + +# func_convert_file_nix_to_cygwin ARG +# Convert file name ARG from *nix to Cygwin format. Requires Cygwin installed +# in a wine environment, working winepath, and LT_CYGPATH set. Returns result +# in func_to_host_file_result. +func_convert_file_nix_to_cygwin () +{ + $opt_debug + func_to_host_file_result="$1" + if test -n "$1"; then + # convert from *nix to w32, then use cygpath to convert from w32 to cygwin. + func_convert_core_file_wine_to_w32 "$1" + func_cygpath -u "$func_convert_core_file_wine_to_w32_result" + func_to_host_file_result="$func_cygpath_result" + fi + func_convert_file_check "$1" "$func_to_host_file_result" +} +# end func_convert_file_nix_to_cygwin + + +############################################# +# $build to $host PATH CONVERSION FUNCTIONS # +############################################# +# invoked via `$to_host_path_cmd ARG' +# +# In each case, ARG is the path to be converted from $build to $host format. +# The result will be available in $func_to_host_path_result. +# +# Path separators are also converted from $build format to $host format. If +# ARG begins or ends with a path separator character, it is preserved (but +# converted to $host format) on output. +# +# All path conversion functions are named using the following convention: +# file name conversion function : func_convert_file_X_to_Y () +# path conversion function : func_convert_path_X_to_Y () +# where, for any given $build/$host combination the 'X_to_Y' value is the +# same. If conversion functions are added for new $build/$host combinations, +# the two new functions must follow this pattern, or func_init_to_host_path_cmd +# will break. + + +# func_init_to_host_path_cmd +# Ensures that function "pointer" variable $to_host_path_cmd is set to the +# appropriate value, based on the value of $to_host_file_cmd. +to_host_path_cmd= +func_init_to_host_path_cmd () +{ + $opt_debug + if test -z "$to_host_path_cmd"; then + func_stripname 'func_convert_file_' '' "$to_host_file_cmd" + to_host_path_cmd="func_convert_path_${func_stripname_result}" + fi +} + + +# func_to_host_path ARG +# Converts the path ARG from $build format to $host format. Return result +# in func_to_host_path_result. +func_to_host_path () +{ + $opt_debug + func_init_to_host_path_cmd + $to_host_path_cmd "$1" +} +# end func_to_host_path + + +# func_convert_path_noop ARG +# Copy ARG to func_to_host_path_result. +func_convert_path_noop () +{ + func_to_host_path_result="$1" +} +# end func_convert_path_noop + + +# func_convert_path_msys_to_w32 ARG +# Convert path ARG from (mingw) MSYS to (mingw) w32 format; automatic +# conversion to w32 is not available inside the cwrapper. Returns result in +# func_to_host_path_result. +func_convert_path_msys_to_w32 () +{ + $opt_debug + func_to_host_path_result="$1" + if test -n "$1"; then + # Remove leading and trailing path separator characters from ARG. MSYS + # behavior is inconsistent here; cygpath turns them into '.;' and ';.'; + # and winepath ignores them completely. + func_stripname : : "$1" + func_to_host_path_tmp1=$func_stripname_result + func_convert_core_msys_to_w32 "$func_to_host_path_tmp1" + func_to_host_path_result="$func_convert_core_msys_to_w32_result" + func_convert_path_check : ";" \ + "$func_to_host_path_tmp1" "$func_to_host_path_result" + func_convert_path_front_back_pathsep ":*" "*:" ";" "$1" + fi +} +# end func_convert_path_msys_to_w32 + + +# func_convert_path_cygwin_to_w32 ARG +# Convert path ARG from Cygwin to w32 format. Returns result in +# func_to_host_file_result. +func_convert_path_cygwin_to_w32 () +{ + $opt_debug + func_to_host_path_result="$1" + if test -n "$1"; then + # See func_convert_path_msys_to_w32: + func_stripname : : "$1" + func_to_host_path_tmp1=$func_stripname_result + func_to_host_path_result=`cygpath -m -p "$func_to_host_path_tmp1"` + func_convert_path_check : ";" \ + "$func_to_host_path_tmp1" "$func_to_host_path_result" + func_convert_path_front_back_pathsep ":*" "*:" ";" "$1" + fi +} +# end func_convert_path_cygwin_to_w32 + + +# func_convert_path_nix_to_w32 ARG +# Convert path ARG from *nix to w32 format. Requires a wine environment and +# a working winepath. Returns result in func_to_host_file_result. +func_convert_path_nix_to_w32 () +{ + $opt_debug + func_to_host_path_result="$1" + if test -n "$1"; then + # See func_convert_path_msys_to_w32: + func_stripname : : "$1" + func_to_host_path_tmp1=$func_stripname_result + func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1" + func_to_host_path_result="$func_convert_core_path_wine_to_w32_result" + func_convert_path_check : ";" \ + "$func_to_host_path_tmp1" "$func_to_host_path_result" + func_convert_path_front_back_pathsep ":*" "*:" ";" "$1" + fi +} +# end func_convert_path_nix_to_w32 + + +# func_convert_path_msys_to_cygwin ARG +# Convert path ARG from MSYS to Cygwin format. Requires LT_CYGPATH set. +# Returns result in func_to_host_file_result. +func_convert_path_msys_to_cygwin () +{ + $opt_debug + func_to_host_path_result="$1" + if test -n "$1"; then + # See func_convert_path_msys_to_w32: + func_stripname : : "$1" + func_to_host_path_tmp1=$func_stripname_result + func_convert_core_msys_to_w32 "$func_to_host_path_tmp1" + func_cygpath -u -p "$func_convert_core_msys_to_w32_result" + func_to_host_path_result="$func_cygpath_result" + func_convert_path_check : : \ + "$func_to_host_path_tmp1" "$func_to_host_path_result" + func_convert_path_front_back_pathsep ":*" "*:" : "$1" + fi +} +# end func_convert_path_msys_to_cygwin + + +# func_convert_path_nix_to_cygwin ARG +# Convert path ARG from *nix to Cygwin format. Requires Cygwin installed in a +# a wine environment, working winepath, and LT_CYGPATH set. Returns result in +# func_to_host_file_result. +func_convert_path_nix_to_cygwin () +{ + $opt_debug + func_to_host_path_result="$1" + if test -n "$1"; then + # Remove leading and trailing path separator characters from + # ARG. msys behavior is inconsistent here, cygpath turns them + # into '.;' and ';.', and winepath ignores them completely. + func_stripname : : "$1" + func_to_host_path_tmp1=$func_stripname_result + func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1" + func_cygpath -u -p "$func_convert_core_path_wine_to_w32_result" + func_to_host_path_result="$func_cygpath_result" + func_convert_path_check : : \ + "$func_to_host_path_tmp1" "$func_to_host_path_result" + func_convert_path_front_back_pathsep ":*" "*:" : "$1" + fi +} +# end func_convert_path_nix_to_cygwin + + +# func_mode_compile arg... +func_mode_compile () +{ + $opt_debug + # Get the compilation command and the source file. + base_compile= + srcfile="$nonopt" # always keep a non-empty value in "srcfile" + suppress_opt=yes + suppress_output= + arg_mode=normal + libobj= + later= + pie_flag= + + for arg + do + case $arg_mode in + arg ) + # do not "continue". Instead, add this to base_compile + lastarg="$arg" + arg_mode=normal + ;; + + target ) + libobj="$arg" + arg_mode=normal + continue + ;; + + normal ) + # Accept any command-line options. + case $arg in + -o) + test -n "$libobj" && \ + func_fatal_error "you cannot specify \`-o' more than once" + arg_mode=target + continue + ;; + + -pie | -fpie | -fPIE) + func_append pie_flag " $arg" + continue + ;; + + -shared | -static | -prefer-pic | -prefer-non-pic) + func_append later " $arg" + continue + ;; + + -no-suppress) + suppress_opt=no + continue + ;; + + -Xcompiler) + arg_mode=arg # the next one goes into the "base_compile" arg list + continue # The current "srcfile" will either be retained or + ;; # replaced later. I would guess that would be a bug. + + -Wc,*) + func_stripname '-Wc,' '' "$arg" + args=$func_stripname_result + lastarg= + save_ifs="$IFS"; IFS=',' + for arg in $args; do + IFS="$save_ifs" + func_append_quoted lastarg "$arg" + done + IFS="$save_ifs" + func_stripname ' ' '' "$lastarg" + lastarg=$func_stripname_result + + # Add the arguments to base_compile. + func_append base_compile " $lastarg" + continue + ;; + + *) + # Accept the current argument as the source file. + # The previous "srcfile" becomes the current argument. + # + lastarg="$srcfile" + srcfile="$arg" + ;; + esac # case $arg + ;; + esac # case $arg_mode + + # Aesthetically quote the previous argument. + func_append_quoted base_compile "$lastarg" + done # for arg + + case $arg_mode in + arg) + func_fatal_error "you must specify an argument for -Xcompile" + ;; + target) + func_fatal_error "you must specify a target with \`-o'" + ;; + *) + # Get the name of the library object. + test -z "$libobj" && { + func_basename "$srcfile" + libobj="$func_basename_result" + } + ;; + esac + + # Recognize several different file suffixes. + # If the user specifies -o file.o, it is replaced with file.lo + case $libobj in + *.[cCFSifmso] | \ + *.ada | *.adb | *.ads | *.asm | \ + *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \ + *.[fF][09]? | *.for | *.java | *.obj | *.sx | *.cu | *.cup) + func_xform "$libobj" + libobj=$func_xform_result + ;; + esac + + case $libobj in + *.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;; + *) + func_fatal_error "cannot determine name of library object from \`$libobj'" + ;; + esac + + func_infer_tag $base_compile + + for arg in $later; do + case $arg in + -shared) + test "$build_libtool_libs" != yes && \ + func_fatal_configuration "can not build a shared library" + build_old_libs=no + continue + ;; + + -static) + build_libtool_libs=no + build_old_libs=yes + continue + ;; + + -prefer-pic) + pic_mode=yes + continue + ;; + + -prefer-non-pic) + pic_mode=no + continue + ;; + esac + done + + func_quote_for_eval "$libobj" + test "X$libobj" != "X$func_quote_for_eval_result" \ + && $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"' &()|`$[]' \ + && func_warning "libobj name \`$libobj' may not contain shell special characters." + func_dirname_and_basename "$obj" "/" "" + objname="$func_basename_result" + xdir="$func_dirname_result" + lobj=${xdir}$objdir/$objname + + test -z "$base_compile" && \ + func_fatal_help "you must specify a compilation command" + + # Delete any leftover library objects. + if test "$build_old_libs" = yes; then + removelist="$obj $lobj $libobj ${libobj}T" + else + removelist="$lobj $libobj ${libobj}T" + fi + + # On Cygwin there's no "real" PIC flag so we must build both object types + case $host_os in + cygwin* | mingw* | pw32* | os2* | cegcc*) + pic_mode=default + ;; + esac + if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then + # non-PIC code in shared libraries is not supported + pic_mode=default + fi + + # Calculate the filename of the output object if compiler does + # not support -o with -c + if test "$compiler_c_o" = no; then + output_obj=`$ECHO "$srcfile" | $SED 's%^.*/%%; s%\.[^.]*$%%'`.${objext} + lockfile="$output_obj.lock" + else + output_obj= + need_locks=no + lockfile= + fi + + # Lock this critical section if it is needed + # We use this script file to make the link, it avoids creating a new file + if test "$need_locks" = yes; then + until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do + func_echo "Waiting for $lockfile to be removed" + sleep 2 + done + elif test "$need_locks" = warn; then + if test -f "$lockfile"; then + $ECHO "\ +*** ERROR, $lockfile exists and contains: +`cat $lockfile 2>/dev/null` + +This indicates that another process is trying to use the same +temporary object file, and libtool could not work around it because +your compiler does not support \`-c' and \`-o' together. If you +repeat this compilation, it may succeed, by chance, but you had better +avoid parallel builds (make -j) in this platform, or get a better +compiler." + + $opt_dry_run || $RM $removelist + exit $EXIT_FAILURE + fi + func_append removelist " $output_obj" + $ECHO "$srcfile" > "$lockfile" + fi + + $opt_dry_run || $RM $removelist + func_append removelist " $lockfile" + trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15 + + func_to_tool_file "$srcfile" func_convert_file_msys_to_w32 + srcfile=$func_to_tool_file_result + func_quote_for_eval "$srcfile" + qsrcfile=$func_quote_for_eval_result + + # Only build a PIC object if we are building libtool libraries. + if test "$build_libtool_libs" = yes; then + # Without this assignment, base_compile gets emptied. + fbsd_hideous_sh_bug=$base_compile + + if test "$pic_mode" != no; then + command="$base_compile $qsrcfile $pic_flag" + else + # Don't build PIC code + command="$base_compile $qsrcfile" + fi + + func_mkdir_p "$xdir$objdir" + + if test -z "$output_obj"; then + # Place PIC objects in $objdir + func_append command " -o $lobj" + fi + + func_show_eval_locale "$command" \ + 'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE' + + if test "$need_locks" = warn && + test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then + $ECHO "\ +*** ERROR, $lockfile contains: +`cat $lockfile 2>/dev/null` + +but it should contain: +$srcfile + +This indicates that another process is trying to use the same +temporary object file, and libtool could not work around it because +your compiler does not support \`-c' and \`-o' together. If you +repeat this compilation, it may succeed, by chance, but you had better +avoid parallel builds (make -j) in this platform, or get a better +compiler." + + $opt_dry_run || $RM $removelist + exit $EXIT_FAILURE + fi + + # Just move the object if needed, then go on to compile the next one + if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then + func_show_eval '$MV "$output_obj" "$lobj"' \ + 'error=$?; $opt_dry_run || $RM $removelist; exit $error' + fi + + # Allow error messages only from the first compilation. + if test "$suppress_opt" = yes; then + suppress_output=' >/dev/null 2>&1' + fi + fi + + # Only build a position-dependent object if we build old libraries. + if test "$build_old_libs" = yes; then + if test "$pic_mode" != yes; then + # Don't build PIC code + command="$base_compile $qsrcfile$pie_flag" + else + command="$base_compile $qsrcfile $pic_flag" + fi + if test "$compiler_c_o" = yes; then + func_append command " -o $obj" + fi + + # Suppress compiler output if we already did a PIC compilation. + func_append command "$suppress_output" + func_show_eval_locale "$command" \ + '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' + + if test "$need_locks" = warn && + test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then + $ECHO "\ +*** ERROR, $lockfile contains: +`cat $lockfile 2>/dev/null` + +but it should contain: +$srcfile + +This indicates that another process is trying to use the same +temporary object file, and libtool could not work around it because +your compiler does not support \`-c' and \`-o' together. If you +repeat this compilation, it may succeed, by chance, but you had better +avoid parallel builds (make -j) in this platform, or get a better +compiler." + + $opt_dry_run || $RM $removelist + exit $EXIT_FAILURE + fi + + # Just move the object if needed + if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then + func_show_eval '$MV "$output_obj" "$obj"' \ + 'error=$?; $opt_dry_run || $RM $removelist; exit $error' + fi + fi + + $opt_dry_run || { + func_write_libtool_object "$libobj" "$objdir/$objname" "$objname" + + # Unlock the critical section if it was locked + if test "$need_locks" != no; then + removelist=$lockfile + $RM "$lockfile" + fi + } + + exit $EXIT_SUCCESS +} + +$opt_help || { + test "$opt_mode" = compile && func_mode_compile ${1+"$@"} +} + +func_mode_help () +{ + # We need to display help for each of the modes. + case $opt_mode in + "") + # Generic help is extracted from the usage comments + # at the start of this file. + func_help + ;; + + clean) + $ECHO \ +"Usage: $progname [OPTION]... --mode=clean RM [RM-OPTION]... FILE... + +Remove files from the build directory. + +RM is the name of the program to use to delete files associated with each FILE +(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed +to RM. + +If FILE is a libtool library, object or program, all the files associated +with it are deleted. Otherwise, only FILE itself is deleted using RM." + ;; + + compile) + $ECHO \ +"Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE + +Compile a source file into a libtool library object. + +This mode accepts the following additional options: + + -o OUTPUT-FILE set the output file name to OUTPUT-FILE + -no-suppress do not suppress compiler output for multiple passes + -prefer-pic try to build PIC objects only + -prefer-non-pic try to build non-PIC objects only + -shared do not build a \`.o' file suitable for static linking + -static only build a \`.o' file suitable for static linking + -Wc,FLAG pass FLAG directly to the compiler + +COMPILE-COMMAND is a command to be used in creating a \`standard' object file +from the given SOURCEFILE. + +The output file name is determined by removing the directory component from +SOURCEFILE, then substituting the C source code suffix \`.c' with the +library object suffix, \`.lo'." + ;; + + execute) + $ECHO \ +"Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]... + +Automatically set library path, then run a program. + +This mode accepts the following additional options: + + -dlopen FILE add the directory containing FILE to the library path + +This mode sets the library path environment variable according to \`-dlopen' +flags. + +If any of the ARGS are libtool executable wrappers, then they are translated +into their corresponding uninstalled binary, and any of their required library +directories are added to the library path. + +Then, COMMAND is executed, with ARGS as arguments." + ;; + + finish) + $ECHO \ +"Usage: $progname [OPTION]... --mode=finish [LIBDIR]... + +Complete the installation of libtool libraries. + +Each LIBDIR is a directory that contains libtool libraries. + +The commands that this mode executes may require superuser privileges. Use +the \`--dry-run' option if you just want to see what would be executed." + ;; + + install) + $ECHO \ +"Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND... + +Install executables or libraries. + +INSTALL-COMMAND is the installation command. The first component should be +either the \`install' or \`cp' program. + +The following components of INSTALL-COMMAND are treated specially: + + -inst-prefix-dir PREFIX-DIR Use PREFIX-DIR as a staging area for installation + +The rest of the components are interpreted as arguments to that command (only +BSD-compatible install options are recognized)." + ;; + + link) + $ECHO \ +"Usage: $progname [OPTION]... --mode=link LINK-COMMAND... + +Link object files or libraries together to form another library, or to +create an executable program. + +LINK-COMMAND is a command using the C compiler that you would use to create +a program from several object files. + +The following components of LINK-COMMAND are treated specially: + + -all-static do not do any dynamic linking at all + -avoid-version do not add a version suffix if possible + -bindir BINDIR specify path to binaries directory (for systems where + libraries must be found in the PATH setting at runtime) + -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime + -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols + -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3) + -export-symbols SYMFILE + try to export only the symbols listed in SYMFILE + -export-symbols-regex REGEX + try to export only the symbols matching REGEX + -LLIBDIR search LIBDIR for required installed libraries + -lNAME OUTPUT-FILE requires the installed library libNAME + -module build a library that can dlopened + -no-fast-install disable the fast-install mode + -no-install link a not-installable executable + -no-undefined declare that a library does not refer to external symbols + -o OUTPUT-FILE create OUTPUT-FILE from the specified objects + -objectlist FILE Use a list of object files found in FILE to specify objects + -precious-files-regex REGEX + don't remove output files matching REGEX + -release RELEASE specify package release information + -rpath LIBDIR the created library will eventually be installed in LIBDIR + -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries + -shared only do dynamic linking of libtool libraries + -shrext SUFFIX override the standard shared library file extension + -static do not do any dynamic linking of uninstalled libtool libraries + -static-libtool-libs + do not do any dynamic linking of libtool libraries + -version-info CURRENT[:REVISION[:AGE]] + specify library version info [each variable defaults to 0] + -weak LIBNAME declare that the target provides the LIBNAME interface + -Wc,FLAG + -Xcompiler FLAG pass linker-specific FLAG directly to the compiler + -Wl,FLAG + -Xlinker FLAG pass linker-specific FLAG directly to the linker + -XCClinker FLAG pass link-specific FLAG to the compiler driver (CC) + +All other options (arguments beginning with \`-') are ignored. + +Every other argument is treated as a filename. Files ending in \`.la' are +treated as uninstalled libtool libraries, other files are standard or library +object files. + +If the OUTPUT-FILE ends in \`.la', then a libtool library is created, +only library objects (\`.lo' files) may be specified, and \`-rpath' is +required, except when creating a convenience library. + +If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created +using \`ar' and \`ranlib', or on Windows using \`lib'. + +If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file +is created, otherwise an executable program is created." + ;; + + uninstall) + $ECHO \ +"Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE... + +Remove libraries from an installation directory. + +RM is the name of the program to use to delete files associated with each FILE +(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed +to RM. + +If FILE is a libtool library, all the files associated with it are deleted. +Otherwise, only FILE itself is deleted using RM." + ;; + + *) + func_fatal_help "invalid operation mode \`$opt_mode'" + ;; + esac + + echo + $ECHO "Try \`$progname --help' for more information about other modes." +} + +# Now that we've collected a possible --mode arg, show help if necessary +if $opt_help; then + if test "$opt_help" = :; then + func_mode_help + else + { + func_help noexit + for opt_mode in compile link execute install finish uninstall clean; do + func_mode_help + done + } | sed -n '1p; 2,$s/^Usage:/ or: /p' + { + func_help noexit + for opt_mode in compile link execute install finish uninstall clean; do + echo + func_mode_help + done + } | + sed '1d + /^When reporting/,/^Report/{ + H + d + } + $x + /information about other modes/d + /more detailed .*MODE/d + s/^Usage:.*--mode=\([^ ]*\) .*/Description of \1 mode:/' + fi + exit $? +fi + + +# func_mode_execute arg... +func_mode_execute () +{ + $opt_debug + # The first argument is the command name. + cmd="$nonopt" + test -z "$cmd" && \ + func_fatal_help "you must specify a COMMAND" + + # Handle -dlopen flags immediately. + for file in $opt_dlopen; do + test -f "$file" \ + || func_fatal_help "\`$file' is not a file" + + dir= + case $file in + *.la) + func_resolve_sysroot "$file" + file=$func_resolve_sysroot_result + + # Check to see that this really is a libtool archive. + func_lalib_unsafe_p "$file" \ + || func_fatal_help "\`$lib' is not a valid libtool archive" + + # Read the libtool library. + dlname= + library_names= + func_source "$file" + + # Skip this library if it cannot be dlopened. + if test -z "$dlname"; then + # Warn if it was a shared library. + test -n "$library_names" && \ + func_warning "\`$file' was not linked with \`-export-dynamic'" + continue + fi + + func_dirname "$file" "" "." + dir="$func_dirname_result" + + if test -f "$dir/$objdir/$dlname"; then + func_append dir "/$objdir" + else + if test ! -f "$dir/$dlname"; then + func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" + fi + fi + ;; + + *.lo) + # Just add the directory containing the .lo file. + func_dirname "$file" "" "." + dir="$func_dirname_result" + ;; + + *) + func_warning "\`-dlopen' is ignored for non-libtool libraries and objects" + continue + ;; + esac + + # Get the absolute pathname. + absdir=`cd "$dir" && pwd` + test -n "$absdir" && dir="$absdir" + + # Now add the directory to shlibpath_var. + if eval "test -z \"\$$shlibpath_var\""; then + eval "$shlibpath_var=\"\$dir\"" + else + eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\"" + fi + done + + # This variable tells wrapper scripts just to set shlibpath_var + # rather than running their programs. + libtool_execute_magic="$magic" + + # Check if any of the arguments is a wrapper script. + args= + for file + do + case $file in + -* | *.la | *.lo ) ;; + *) + # Do a test to see if this is really a libtool program. + if func_ltwrapper_script_p "$file"; then + func_source "$file" + # Transform arg to wrapped name. + file="$progdir/$program" + elif func_ltwrapper_executable_p "$file"; then + func_ltwrapper_scriptname "$file" + func_source "$func_ltwrapper_scriptname_result" + # Transform arg to wrapped name. + file="$progdir/$program" + fi + ;; + esac + # Quote arguments (to preserve shell metacharacters). + func_append_quoted args "$file" + done + + if test "X$opt_dry_run" = Xfalse; then + if test -n "$shlibpath_var"; then + # Export the shlibpath_var. + eval "export $shlibpath_var" + fi + + # Restore saved environment variables + for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES + do + eval "if test \"\${save_$lt_var+set}\" = set; then + $lt_var=\$save_$lt_var; export $lt_var + else + $lt_unset $lt_var + fi" + done + + # Now prepare to actually exec the command. + exec_cmd="\$cmd$args" + else + # Display what would be done. + if test -n "$shlibpath_var"; then + eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\"" + echo "export $shlibpath_var" + fi + $ECHO "$cmd$args" + exit $EXIT_SUCCESS + fi +} + +test "$opt_mode" = execute && func_mode_execute ${1+"$@"} + + +# func_mode_finish arg... +func_mode_finish () +{ + $opt_debug + libs= + libdirs= + admincmds= + + for opt in "$nonopt" ${1+"$@"} + do + if test -d "$opt"; then + func_append libdirs " $opt" + + elif test -f "$opt"; then + if func_lalib_unsafe_p "$opt"; then + func_append libs " $opt" + else + func_warning "\`$opt' is not a valid libtool archive" + fi + + else + func_fatal_error "invalid argument \`$opt'" + fi + done + + if test -n "$libs"; then + if test -n "$lt_sysroot"; then + sysroot_regex=`$ECHO "$lt_sysroot" | $SED "$sed_make_literal_regex"` + sysroot_cmd="s/\([ ']\)$sysroot_regex/\1/g;" + else + sysroot_cmd= + fi + + # Remove sysroot references + if $opt_dry_run; then + for lib in $libs; do + echo "removing references to $lt_sysroot and \`=' prefixes from $lib" + done + else + tmpdir=`func_mktempdir` + for lib in $libs; do + sed -e "${sysroot_cmd} s/\([ ']-[LR]\)=/\1/g; s/\([ ']\)=/\1/g" $lib \ + > $tmpdir/tmp-la + mv -f $tmpdir/tmp-la $lib + done + ${RM}r "$tmpdir" + fi + fi + + if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then + for libdir in $libdirs; do + if test -n "$finish_cmds"; then + # Do each command in the finish commands. + func_execute_cmds "$finish_cmds" 'admincmds="$admincmds +'"$cmd"'"' + fi + if test -n "$finish_eval"; then + # Do the single finish_eval. + eval cmds=\"$finish_eval\" + $opt_dry_run || eval "$cmds" || func_append admincmds " + $cmds" + fi + done + fi + + # Exit here if they wanted silent mode. + $opt_silent && exit $EXIT_SUCCESS + + if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then + echo "----------------------------------------------------------------------" + echo "Libraries have been installed in:" + for libdir in $libdirs; do + $ECHO " $libdir" + done + echo + echo "If you ever happen to want to link against installed libraries" + echo "in a given directory, LIBDIR, you must either use libtool, and" + echo "specify the full pathname of the library, or use the \`-LLIBDIR'" + echo "flag during linking and do at least one of the following:" + if test -n "$shlibpath_var"; then + echo " - add LIBDIR to the \`$shlibpath_var' environment variable" + echo " during execution" + fi + if test -n "$runpath_var"; then + echo " - add LIBDIR to the \`$runpath_var' environment variable" + echo " during linking" + fi + if test -n "$hardcode_libdir_flag_spec"; then + libdir=LIBDIR + eval flag=\"$hardcode_libdir_flag_spec\" + + $ECHO " - use the \`$flag' linker flag" + fi + if test -n "$admincmds"; then + $ECHO " - have your system administrator run these commands:$admincmds" + fi + if test -f /etc/ld.so.conf; then + echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'" + fi + echo + + echo "See any operating system documentation about shared libraries for" + case $host in + solaris2.[6789]|solaris2.1[0-9]) + echo "more information, such as the ld(1), crle(1) and ld.so(8) manual" + echo "pages." + ;; + *) + echo "more information, such as the ld(1) and ld.so(8) manual pages." + ;; + esac + echo "----------------------------------------------------------------------" + fi + exit $EXIT_SUCCESS +} + +test "$opt_mode" = finish && func_mode_finish ${1+"$@"} + + +# func_mode_install arg... +func_mode_install () +{ + $opt_debug + # There may be an optional sh(1) argument at the beginning of + # install_prog (especially on Windows NT). + if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh || + # Allow the use of GNU shtool's install command. + case $nonopt in *shtool*) :;; *) false;; esac; then + # Aesthetically quote it. + func_quote_for_eval "$nonopt" + install_prog="$func_quote_for_eval_result " + arg=$1 + shift + else + install_prog= + arg=$nonopt + fi + + # The real first argument should be the name of the installation program. + # Aesthetically quote it. + func_quote_for_eval "$arg" + func_append install_prog "$func_quote_for_eval_result" + install_shared_prog=$install_prog + case " $install_prog " in + *[\\\ /]cp\ *) install_cp=: ;; + *) install_cp=false ;; + esac + + # We need to accept at least all the BSD install flags. + dest= + files= + opts= + prev= + install_type= + isdir=no + stripme= + no_mode=: + for arg + do + arg2= + if test -n "$dest"; then + func_append files " $dest" + dest=$arg + continue + fi + + case $arg in + -d) isdir=yes ;; + -f) + if $install_cp; then :; else + prev=$arg + fi + ;; + -g | -m | -o) + prev=$arg + ;; + -s) + stripme=" -s" + continue + ;; + -*) + ;; + *) + # If the previous option needed an argument, then skip it. + if test -n "$prev"; then + if test "x$prev" = x-m && test -n "$install_override_mode"; then + arg2=$install_override_mode + no_mode=false + fi + prev= + else + dest=$arg + continue + fi + ;; + esac + + # Aesthetically quote the argument. + func_quote_for_eval "$arg" + func_append install_prog " $func_quote_for_eval_result" + if test -n "$arg2"; then + func_quote_for_eval "$arg2" + fi + func_append install_shared_prog " $func_quote_for_eval_result" + done + + test -z "$install_prog" && \ + func_fatal_help "you must specify an install program" + + test -n "$prev" && \ + func_fatal_help "the \`$prev' option requires an argument" + + if test -n "$install_override_mode" && $no_mode; then + if $install_cp; then :; else + func_quote_for_eval "$install_override_mode" + func_append install_shared_prog " -m $func_quote_for_eval_result" + fi + fi + + if test -z "$files"; then + if test -z "$dest"; then + func_fatal_help "no file or destination specified" + else + func_fatal_help "you must specify a destination" + fi + fi + + # Strip any trailing slash from the destination. + func_stripname '' '/' "$dest" + dest=$func_stripname_result + + # Check to see that the destination is a directory. + test -d "$dest" && isdir=yes + if test "$isdir" = yes; then + destdir="$dest" + destname= + else + func_dirname_and_basename "$dest" "" "." + destdir="$func_dirname_result" + destname="$func_basename_result" + + # Not a directory, so check to see that there is only one file specified. + set dummy $files; shift + test "$#" -gt 1 && \ + func_fatal_help "\`$dest' is not a directory" + fi + case $destdir in + [\\/]* | [A-Za-z]:[\\/]*) ;; + *) + for file in $files; do + case $file in + *.lo) ;; + *) + func_fatal_help "\`$destdir' must be an absolute directory name" + ;; + esac + done + ;; + esac + + # This variable tells wrapper scripts just to set variables rather + # than running their programs. + libtool_install_magic="$magic" + + staticlibs= + future_libdirs= + current_libdirs= + for file in $files; do + + # Do each installation. + case $file in + *.$libext) + # Do the static libraries later. + func_append staticlibs " $file" + ;; + + *.la) + func_resolve_sysroot "$file" + file=$func_resolve_sysroot_result + + # Check to see that this really is a libtool archive. + func_lalib_unsafe_p "$file" \ + || func_fatal_help "\`$file' is not a valid libtool archive" + + library_names= + old_library= + relink_command= + func_source "$file" + + # Add the libdir to current_libdirs if it is the destination. + if test "X$destdir" = "X$libdir"; then + case "$current_libdirs " in + *" $libdir "*) ;; + *) func_append current_libdirs " $libdir" ;; + esac + else + # Note the libdir as a future libdir. + case "$future_libdirs " in + *" $libdir "*) ;; + *) func_append future_libdirs " $libdir" ;; + esac + fi + + func_dirname "$file" "/" "" + dir="$func_dirname_result" + func_append dir "$objdir" + + if test -n "$relink_command"; then + # Determine the prefix the user has applied to our future dir. + inst_prefix_dir=`$ECHO "$destdir" | $SED -e "s%$libdir\$%%"` + + # Don't allow the user to place us outside of our expected + # location b/c this prevents finding dependent libraries that + # are installed to the same prefix. + # At present, this check doesn't affect windows .dll's that + # are installed into $libdir/../bin (currently, that works fine) + # but it's something to keep an eye on. + test "$inst_prefix_dir" = "$destdir" && \ + func_fatal_error "error: cannot install \`$file' to a directory not ending in $libdir" + + if test -n "$inst_prefix_dir"; then + # Stick the inst_prefix_dir data into the link command. + relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"` + else + relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%%"` + fi + + func_warning "relinking \`$file'" + func_show_eval "$relink_command" \ + 'func_fatal_error "error: relink \`$file'\'' with the above command before installing it"' + fi + + # See the names of the shared library. + set dummy $library_names; shift + if test -n "$1"; then + realname="$1" + shift + + srcname="$realname" + test -n "$relink_command" && srcname="$realname"T + + # Install the shared library and build the symlinks. + func_show_eval "$install_shared_prog $dir/$srcname $destdir/$realname" \ + 'exit $?' + tstripme="$stripme" + case $host_os in + cygwin* | mingw* | pw32* | cegcc*) + case $realname in + *.dll.a) + tstripme="" + ;; + esac + ;; + esac + if test -n "$tstripme" && test -n "$striplib"; then + func_show_eval "$striplib $destdir/$realname" 'exit $?' + fi + + if test "$#" -gt 0; then + # Delete the old symlinks, and create new ones. + # Try `ln -sf' first, because the `ln' binary might depend on + # the symlink we replace! Solaris /bin/ln does not understand -f, + # so we also need to try rm && ln -s. + for linkname + do + test "$linkname" != "$realname" \ + && func_show_eval "(cd $destdir && { $LN_S -f $realname $linkname || { $RM $linkname && $LN_S $realname $linkname; }; })" + done + fi + + # Do each command in the postinstall commands. + lib="$destdir/$realname" + func_execute_cmds "$postinstall_cmds" 'exit $?' + fi + + # Install the pseudo-library for information purposes. + func_basename "$file" + name="$func_basename_result" + instname="$dir/$name"i + func_show_eval "$install_prog $instname $destdir/$name" 'exit $?' + + # Maybe install the static library, too. + test -n "$old_library" && func_append staticlibs " $dir/$old_library" + ;; + + *.lo) + # Install (i.e. copy) a libtool object. + + # Figure out destination file name, if it wasn't already specified. + if test -n "$destname"; then + destfile="$destdir/$destname" + else + func_basename "$file" + destfile="$func_basename_result" + destfile="$destdir/$destfile" + fi + + # Deduce the name of the destination old-style object file. + case $destfile in + *.lo) + func_lo2o "$destfile" + staticdest=$func_lo2o_result + ;; + *.$objext) + staticdest="$destfile" + destfile= + ;; + *) + func_fatal_help "cannot copy a libtool object to \`$destfile'" + ;; + esac + + # Install the libtool object if requested. + test -n "$destfile" && \ + func_show_eval "$install_prog $file $destfile" 'exit $?' + + # Install the old object if enabled. + if test "$build_old_libs" = yes; then + # Deduce the name of the old-style object file. + func_lo2o "$file" + staticobj=$func_lo2o_result + func_show_eval "$install_prog \$staticobj \$staticdest" 'exit $?' + fi + exit $EXIT_SUCCESS + ;; + + *) + # Figure out destination file name, if it wasn't already specified. + if test -n "$destname"; then + destfile="$destdir/$destname" + else + func_basename "$file" + destfile="$func_basename_result" + destfile="$destdir/$destfile" + fi + + # If the file is missing, and there is a .exe on the end, strip it + # because it is most likely a libtool script we actually want to + # install + stripped_ext="" + case $file in + *.exe) + if test ! -f "$file"; then + func_stripname '' '.exe' "$file" + file=$func_stripname_result + stripped_ext=".exe" + fi + ;; + esac + + # Do a test to see if this is really a libtool program. + case $host in + *cygwin* | *mingw*) + if func_ltwrapper_executable_p "$file"; then + func_ltwrapper_scriptname "$file" + wrapper=$func_ltwrapper_scriptname_result + else + func_stripname '' '.exe' "$file" + wrapper=$func_stripname_result + fi + ;; + *) + wrapper=$file + ;; + esac + if func_ltwrapper_script_p "$wrapper"; then + notinst_deplibs= + relink_command= + + func_source "$wrapper" + + # Check the variables that should have been set. + test -z "$generated_by_libtool_version" && \ + func_fatal_error "invalid libtool wrapper script \`$wrapper'" + + finalize=yes + for lib in $notinst_deplibs; do + # Check to see that each library is installed. + libdir= + if test -f "$lib"; then + func_source "$lib" + fi + libfile="$libdir/"`$ECHO "$lib" | $SED 's%^.*/%%g'` ### testsuite: skip nested quoting test + if test -n "$libdir" && test ! -f "$libfile"; then + func_warning "\`$lib' has not been installed in \`$libdir'" + finalize=no + fi + done + + relink_command= + func_source "$wrapper" + + outputname= + if test "$fast_install" = no && test -n "$relink_command"; then + $opt_dry_run || { + if test "$finalize" = yes; then + tmpdir=`func_mktempdir` + func_basename "$file$stripped_ext" + file="$func_basename_result" + outputname="$tmpdir/$file" + # Replace the output file specification. + relink_command=`$ECHO "$relink_command" | $SED 's%@OUTPUT@%'"$outputname"'%g'` + + $opt_silent || { + func_quote_for_expand "$relink_command" + eval "func_echo $func_quote_for_expand_result" + } + if eval "$relink_command"; then : + else + func_error "error: relink \`$file' with the above command before installing it" + $opt_dry_run || ${RM}r "$tmpdir" + continue + fi + file="$outputname" + else + func_warning "cannot relink \`$file'" + fi + } + else + # Install the binary that we compiled earlier. + file=`$ECHO "$file$stripped_ext" | $SED "s%\([^/]*\)$%$objdir/\1%"` + fi + fi + + # remove .exe since cygwin /usr/bin/install will append another + # one anyway + case $install_prog,$host in + */usr/bin/install*,*cygwin*) + case $file:$destfile in + *.exe:*.exe) + # this is ok + ;; + *.exe:*) + destfile=$destfile.exe + ;; + *:*.exe) + func_stripname '' '.exe' "$destfile" + destfile=$func_stripname_result + ;; + esac + ;; + esac + func_show_eval "$install_prog\$stripme \$file \$destfile" 'exit $?' + $opt_dry_run || if test -n "$outputname"; then + ${RM}r "$tmpdir" + fi + ;; + esac + done + + for file in $staticlibs; do + func_basename "$file" + name="$func_basename_result" + + # Set up the ranlib parameters. + oldlib="$destdir/$name" + + func_show_eval "$install_prog \$file \$oldlib" 'exit $?' + + if test -n "$stripme" && test -n "$old_striplib"; then + func_show_eval "$old_striplib $oldlib" 'exit $?' + fi + + # Do each command in the postinstall commands. + func_execute_cmds "$old_postinstall_cmds" 'exit $?' + done + + test -n "$future_libdirs" && \ + func_warning "remember to run \`$progname --finish$future_libdirs'" + + if test -n "$current_libdirs"; then + # Maybe just do a dry run. + $opt_dry_run && current_libdirs=" -n$current_libdirs" + exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs' + else + exit $EXIT_SUCCESS + fi +} + +test "$opt_mode" = install && func_mode_install ${1+"$@"} + + +# func_generate_dlsyms outputname originator pic_p +# Extract symbols from dlprefiles and create ${outputname}S.o with +# a dlpreopen symbol table. +func_generate_dlsyms () +{ + $opt_debug + my_outputname="$1" + my_originator="$2" + my_pic_p="${3-no}" + my_prefix=`$ECHO "$my_originator" | sed 's%[^a-zA-Z0-9]%_%g'` + my_dlsyms= + + if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then + if test -n "$NM" && test -n "$global_symbol_pipe"; then + my_dlsyms="${my_outputname}S.c" + else + func_error "not configured to extract global symbols from dlpreopened files" + fi + fi + + if test -n "$my_dlsyms"; then + case $my_dlsyms in + "") ;; + *.c) + # Discover the nlist of each of the dlfiles. + nlist="$output_objdir/${my_outputname}.nm" + + func_show_eval "$RM $nlist ${nlist}S ${nlist}T" + + # Parse the name list into a source file. + func_verbose "creating $output_objdir/$my_dlsyms" + + $opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\ +/* $my_dlsyms - symbol resolution table for \`$my_outputname' dlsym emulation. */ +/* Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION */ + +#ifdef __cplusplus +extern \"C\" { +#endif + +#if defined(__GNUC__) && (((__GNUC__ == 4) && (__GNUC_MINOR__ >= 4)) || (__GNUC__ > 4)) +#pragma GCC diagnostic ignored \"-Wstrict-prototypes\" +#endif + +/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ +#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE) +/* DATA imports from DLLs on WIN32 con't be const, because runtime + relocations are performed -- see ld's documentation on pseudo-relocs. */ +# define LT_DLSYM_CONST +#elif defined(__osf__) +/* This system does not cope well with relocations in const data. */ +# define LT_DLSYM_CONST +#else +# define LT_DLSYM_CONST const +#endif + +/* External symbol declarations for the compiler. */\ +" + + if test "$dlself" = yes; then + func_verbose "generating symbol list for \`$output'" + + $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist" + + # Add our own program objects to the symbol list. + progfiles=`$ECHO "$objs$old_deplibs" | $SP2NL | $SED "$lo2o" | $NL2SP` + for progfile in $progfiles; do + func_to_tool_file "$progfile" func_convert_file_msys_to_w32 + func_verbose "extracting global C symbols from \`$func_to_tool_file_result'" + $opt_dry_run || eval "$NM $func_to_tool_file_result | $global_symbol_pipe >> '$nlist'" + done + + if test -n "$exclude_expsyms"; then + $opt_dry_run || { + eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T' + eval '$MV "$nlist"T "$nlist"' + } + fi + + if test -n "$export_symbols_regex"; then + $opt_dry_run || { + eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T' + eval '$MV "$nlist"T "$nlist"' + } + fi + + # Prepare the list of exported symbols + if test -z "$export_symbols"; then + export_symbols="$output_objdir/$outputname.exp" + $opt_dry_run || { + $RM $export_symbols + eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"' + case $host in + *cygwin* | *mingw* | *cegcc* ) + eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' + eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"' + ;; + esac + } + else + $opt_dry_run || { + eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"' + eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T' + eval '$MV "$nlist"T "$nlist"' + case $host in + *cygwin* | *mingw* | *cegcc* ) + eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' + eval 'cat "$nlist" >> "$output_objdir/$outputname.def"' + ;; + esac + } + fi + fi + + for dlprefile in $dlprefiles; do + func_verbose "extracting global C symbols from \`$dlprefile'" + func_basename "$dlprefile" + name="$func_basename_result" + case $host in + *cygwin* | *mingw* | *cegcc* ) + # if an import library, we need to obtain dlname + if func_win32_import_lib_p "$dlprefile"; then + func_tr_sh "$dlprefile" + eval "curr_lafile=\$libfile_$func_tr_sh_result" + dlprefile_dlbasename="" + if test -n "$curr_lafile" && func_lalib_p "$curr_lafile"; then + # Use subshell, to avoid clobbering current variable values + dlprefile_dlname=`source "$curr_lafile" && echo "$dlname"` + if test -n "$dlprefile_dlname" ; then + func_basename "$dlprefile_dlname" + dlprefile_dlbasename="$func_basename_result" + else + # no lafile. user explicitly requested -dlpreopen . + $sharedlib_from_linklib_cmd "$dlprefile" + dlprefile_dlbasename=$sharedlib_from_linklib_result + fi + fi + $opt_dry_run || { + if test -n "$dlprefile_dlbasename" ; then + eval '$ECHO ": $dlprefile_dlbasename" >> "$nlist"' + else + func_warning "Could not compute DLL name from $name" + eval '$ECHO ": $name " >> "$nlist"' + fi + func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32 + eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe | + $SED -e '/I __imp/d' -e 's/I __nm_/D /;s/_nm__//' >> '$nlist'" + } + else # not an import lib + $opt_dry_run || { + eval '$ECHO ": $name " >> "$nlist"' + func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32 + eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'" + } + fi + ;; + *) + $opt_dry_run || { + eval '$ECHO ": $name " >> "$nlist"' + func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32 + eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'" + } + ;; + esac + done + + $opt_dry_run || { + # Make sure we have at least an empty file. + test -f "$nlist" || : > "$nlist" + + if test -n "$exclude_expsyms"; then + $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T + $MV "$nlist"T "$nlist" + fi + + # Try sorting and uniquifying the output. + if $GREP -v "^: " < "$nlist" | + if sort -k 3 /dev/null 2>&1; then + sort -k 3 + else + sort +2 + fi | + uniq > "$nlist"S; then + : + else + $GREP -v "^: " < "$nlist" > "$nlist"S + fi + + if test -f "$nlist"S; then + eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"' + else + echo '/* NONE */' >> "$output_objdir/$my_dlsyms" + fi + + echo >> "$output_objdir/$my_dlsyms" "\ + +/* The mapping between symbol names and symbols. */ +typedef struct { + const char *name; + void *address; +} lt_dlsymlist; +extern LT_DLSYM_CONST lt_dlsymlist +lt_${my_prefix}_LTX_preloaded_symbols[]; +LT_DLSYM_CONST lt_dlsymlist +lt_${my_prefix}_LTX_preloaded_symbols[] = +{\ + { \"$my_originator\", (void *) 0 }," + + case $need_lib_prefix in + no) + eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms" + ;; + *) + eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms" + ;; + esac + echo >> "$output_objdir/$my_dlsyms" "\ + {0, (void *) 0} +}; + +/* This works around a problem in FreeBSD linker */ +#ifdef FREEBSD_WORKAROUND +static const void *lt_preloaded_setup() { + return lt_${my_prefix}_LTX_preloaded_symbols; +} +#endif + +#ifdef __cplusplus +} +#endif\ +" + } # !$opt_dry_run + + pic_flag_for_symtable= + case "$compile_command " in + *" -static "*) ;; + *) + case $host in + # compiling the symbol table file with pic_flag works around + # a FreeBSD bug that causes programs to crash when -lm is + # linked before any other PIC object. But we must not use + # pic_flag when linking with -static. The problem exists in + # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1. + *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*) + pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;; + *-*-hpux*) + pic_flag_for_symtable=" $pic_flag" ;; + *) + if test "X$my_pic_p" != Xno; then + pic_flag_for_symtable=" $pic_flag" + fi + ;; + esac + ;; + esac + symtab_cflags= + for arg in $LTCFLAGS; do + case $arg in + -pie | -fpie | -fPIE) ;; + *) func_append symtab_cflags " $arg" ;; + esac + done + + # Now compile the dynamic symbol file. + func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?' + + # Clean up the generated files. + func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T"' + + # Transform the symbol file into the correct name. + symfileobj="$output_objdir/${my_outputname}S.$objext" + case $host in + *cygwin* | *mingw* | *cegcc* ) + if test -f "$output_objdir/$my_outputname.def"; then + compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` + finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` + else + compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"` + finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"` + fi + ;; + *) + compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"` + finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"` + ;; + esac + ;; + *) + func_fatal_error "unknown suffix for \`$my_dlsyms'" + ;; + esac + else + # We keep going just in case the user didn't refer to + # lt_preloaded_symbols. The linker will fail if global_symbol_pipe + # really was required. + + # Nullify the symbol file. + compile_command=`$ECHO "$compile_command" | $SED "s% @SYMFILE@%%"` + finalize_command=`$ECHO "$finalize_command" | $SED "s% @SYMFILE@%%"` + fi +} + +# func_win32_libid arg +# return the library type of file 'arg' +# +# Need a lot of goo to handle *both* DLLs and import libs +# Has to be a shell function in order to 'eat' the argument +# that is supplied when $file_magic_command is called. +# Despite the name, also deal with 64 bit binaries. +func_win32_libid () +{ + $opt_debug + win32_libid_type="unknown" + win32_fileres=`file -L $1 2>/dev/null` + case $win32_fileres in + *ar\ archive\ import\ library*) # definitely import + win32_libid_type="x86 archive import" + ;; + *ar\ archive*) # could be an import, or static + # Keep the egrep pattern in sync with the one in _LT_CHECK_MAGIC_METHOD. + if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | + $EGREP 'file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' >/dev/null; then + func_to_tool_file "$1" func_convert_file_msys_to_w32 + win32_nmres=`eval $NM -f posix -A \"$func_to_tool_file_result\" | + $SED -n -e ' + 1,100{ + / I /{ + s,.*,import, + p + q + } + }'` + case $win32_nmres in + import*) win32_libid_type="x86 archive import";; + *) win32_libid_type="x86 archive static";; + esac + fi + ;; + *DLL*) + win32_libid_type="x86 DLL" + ;; + *executable*) # but shell scripts are "executable" too... + case $win32_fileres in + *MS\ Windows\ PE\ Intel*) + win32_libid_type="x86 DLL" + ;; + esac + ;; + esac + $ECHO "$win32_libid_type" +} + +# func_cygming_dll_for_implib ARG +# +# Platform-specific function to extract the +# name of the DLL associated with the specified +# import library ARG. +# Invoked by eval'ing the libtool variable +# $sharedlib_from_linklib_cmd +# Result is available in the variable +# $sharedlib_from_linklib_result +func_cygming_dll_for_implib () +{ + $opt_debug + sharedlib_from_linklib_result=`$DLLTOOL --identify-strict --identify "$1"` +} + +# func_cygming_dll_for_implib_fallback_core SECTION_NAME LIBNAMEs +# +# The is the core of a fallback implementation of a +# platform-specific function to extract the name of the +# DLL associated with the specified import library LIBNAME. +# +# SECTION_NAME is either .idata$6 or .idata$7, depending +# on the platform and compiler that created the implib. +# +# Echos the name of the DLL associated with the +# specified import library. +func_cygming_dll_for_implib_fallback_core () +{ + $opt_debug + match_literal=`$ECHO "$1" | $SED "$sed_make_literal_regex"` + $OBJDUMP -s --section "$1" "$2" 2>/dev/null | + $SED '/^Contents of section '"$match_literal"':/{ + # Place marker at beginning of archive member dllname section + s/.*/====MARK====/ + p + d + } + # These lines can sometimes be longer than 43 characters, but + # are always uninteresting + /:[ ]*file format pe[i]\{,1\}-/d + /^In archive [^:]*:/d + # Ensure marker is printed + /^====MARK====/p + # Remove all lines with less than 43 characters + /^.\{43\}/!d + # From remaining lines, remove first 43 characters + s/^.\{43\}//' | + $SED -n ' + # Join marker and all lines until next marker into a single line + /^====MARK====/ b para + H + $ b para + b + :para + x + s/\n//g + # Remove the marker + s/^====MARK====// + # Remove trailing dots and whitespace + s/[\. \t]*$// + # Print + /./p' | + # we now have a list, one entry per line, of the stringified + # contents of the appropriate section of all members of the + # archive which possess that section. Heuristic: eliminate + # all those which have a first or second character that is + # a '.' (that is, objdump's representation of an unprintable + # character.) This should work for all archives with less than + # 0x302f exports -- but will fail for DLLs whose name actually + # begins with a literal '.' or a single character followed by + # a '.'. + # + # Of those that remain, print the first one. + $SED -e '/^\./d;/^.\./d;q' +} + +# func_cygming_gnu_implib_p ARG +# This predicate returns with zero status (TRUE) if +# ARG is a GNU/binutils-style import library. Returns +# with nonzero status (FALSE) otherwise. +func_cygming_gnu_implib_p () +{ + $opt_debug + func_to_tool_file "$1" func_convert_file_msys_to_w32 + func_cygming_gnu_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $EGREP ' (_head_[A-Za-z0-9_]+_[ad]l*|[A-Za-z0-9_]+_[ad]l*_iname)$'` + test -n "$func_cygming_gnu_implib_tmp" +} + +# func_cygming_ms_implib_p ARG +# This predicate returns with zero status (TRUE) if +# ARG is an MS-style import library. Returns +# with nonzero status (FALSE) otherwise. +func_cygming_ms_implib_p () +{ + $opt_debug + func_to_tool_file "$1" func_convert_file_msys_to_w32 + func_cygming_ms_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $GREP '_NULL_IMPORT_DESCRIPTOR'` + test -n "$func_cygming_ms_implib_tmp" +} + +# func_cygming_dll_for_implib_fallback ARG +# Platform-specific function to extract the +# name of the DLL associated with the specified +# import library ARG. +# +# This fallback implementation is for use when $DLLTOOL +# does not support the --identify-strict option. +# Invoked by eval'ing the libtool variable +# $sharedlib_from_linklib_cmd +# Result is available in the variable +# $sharedlib_from_linklib_result +func_cygming_dll_for_implib_fallback () +{ + $opt_debug + if func_cygming_gnu_implib_p "$1" ; then + # binutils import library + sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$7' "$1"` + elif func_cygming_ms_implib_p "$1" ; then + # ms-generated import library + sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$6' "$1"` + else + # unknown + sharedlib_from_linklib_result="" + fi +} + + +# func_extract_an_archive dir oldlib +func_extract_an_archive () +{ + $opt_debug + f_ex_an_ar_dir="$1"; shift + f_ex_an_ar_oldlib="$1" + if test "$lock_old_archive_extraction" = yes; then + lockfile=$f_ex_an_ar_oldlib.lock + until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do + func_echo "Waiting for $lockfile to be removed" + sleep 2 + done + fi + func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" \ + 'stat=$?; rm -f "$lockfile"; exit $stat' + if test "$lock_old_archive_extraction" = yes; then + $opt_dry_run || rm -f "$lockfile" + fi + if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then + : + else + func_fatal_error "object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib" + fi +} + + +# func_extract_archives gentop oldlib ... +func_extract_archives () +{ + $opt_debug + my_gentop="$1"; shift + my_oldlibs=${1+"$@"} + my_oldobjs="" + my_xlib="" + my_xabs="" + my_xdir="" + + for my_xlib in $my_oldlibs; do + # Extract the objects. + case $my_xlib in + [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;; + *) my_xabs=`pwd`"/$my_xlib" ;; + esac + func_basename "$my_xlib" + my_xlib="$func_basename_result" + my_xlib_u=$my_xlib + while :; do + case " $extracted_archives " in + *" $my_xlib_u "*) + func_arith $extracted_serial + 1 + extracted_serial=$func_arith_result + my_xlib_u=lt$extracted_serial-$my_xlib ;; + *) break ;; + esac + done + extracted_archives="$extracted_archives $my_xlib_u" + my_xdir="$my_gentop/$my_xlib_u" + + func_mkdir_p "$my_xdir" + + case $host in + *-darwin*) + func_verbose "Extracting $my_xabs" + # Do not bother doing anything if just a dry run + $opt_dry_run || { + darwin_orig_dir=`pwd` + cd $my_xdir || exit $? + darwin_archive=$my_xabs + darwin_curdir=`pwd` + darwin_base_archive=`basename "$darwin_archive"` + darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true` + if test -n "$darwin_arches"; then + darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'` + darwin_arch= + func_verbose "$darwin_base_archive has multiple architectures $darwin_arches" + for darwin_arch in $darwin_arches ; do + func_mkdir_p "unfat-$$/${darwin_base_archive}-${darwin_arch}" + $LIPO -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}" + cd "unfat-$$/${darwin_base_archive}-${darwin_arch}" + func_extract_an_archive "`pwd`" "${darwin_base_archive}" + cd "$darwin_curdir" + $RM "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" + done # $darwin_arches + ## Okay now we've a bunch of thin objects, gotta fatten them up :) + darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$basename" | sort -u` + darwin_file= + darwin_files= + for darwin_file in $darwin_filelist; do + darwin_files=`find unfat-$$ -name $darwin_file -print | sort | $NL2SP` + $LIPO -create -output "$darwin_file" $darwin_files + done # $darwin_filelist + $RM -rf unfat-$$ + cd "$darwin_orig_dir" + else + cd $darwin_orig_dir + func_extract_an_archive "$my_xdir" "$my_xabs" + fi # $darwin_arches + } # !$opt_dry_run + ;; + *) + func_extract_an_archive "$my_xdir" "$my_xabs" + ;; + esac + my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | sort | $NL2SP` + done + + func_extract_archives_result="$my_oldobjs" +} + + +# func_emit_wrapper [arg=no] +# +# Emit a libtool wrapper script on stdout. +# Don't directly open a file because we may want to +# incorporate the script contents within a cygwin/mingw +# wrapper executable. Must ONLY be called from within +# func_mode_link because it depends on a number of variables +# set therein. +# +# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR +# variable will take. If 'yes', then the emitted script +# will assume that the directory in which it is stored is +# the $objdir directory. This is a cygwin/mingw-specific +# behavior. +func_emit_wrapper () +{ + func_emit_wrapper_arg1=${1-no} + + $ECHO "\ +#! $SHELL + +# $output - temporary wrapper script for $objdir/$outputname +# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION +# +# The $output program cannot be directly executed until all the libtool +# libraries that it depends on are installed. +# +# This wrapper script should never be moved out of the build directory. +# If it is, it will not operate correctly. + +# Sed substitution that helps us do robust quoting. It backslashifies +# metacharacters that are still active within double-quoted strings. +sed_quote_subst='$sed_quote_subst' + +# Be Bourne compatible +if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which + # is contrary to our usage. Disable this feature. + alias -g '\${1+\"\$@\"}'='\"\$@\"' + setopt NO_GLOB_SUBST +else + case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac +fi +BIN_SH=xpg4; export BIN_SH # for Tru64 +DUALCASE=1; export DUALCASE # for MKS sh + +# The HP-UX ksh and POSIX shell print the target directory to stdout +# if CDPATH is set. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + +relink_command=\"$relink_command\" + +# This environment variable determines our operation mode. +if test \"\$libtool_install_magic\" = \"$magic\"; then + # install mode needs the following variables: + generated_by_libtool_version='$macro_version' + notinst_deplibs='$notinst_deplibs' +else + # When we are sourced in execute mode, \$file and \$ECHO are already set. + if test \"\$libtool_execute_magic\" != \"$magic\"; then + file=\"\$0\"" + + qECHO=`$ECHO "$ECHO" | $SED "$sed_quote_subst"` + $ECHO "\ + +# A function that is used when there is no print builtin or printf. +func_fallback_echo () +{ + eval 'cat <<_LTECHO_EOF +\$1 +_LTECHO_EOF' +} + ECHO=\"$qECHO\" + fi + +# Very basic option parsing. These options are (a) specific to +# the libtool wrapper, (b) are identical between the wrapper +# /script/ and the wrapper /executable/ which is used only on +# windows platforms, and (c) all begin with the string "--lt-" +# (application programs are unlikely to have options which match +# this pattern). +# +# There are only two supported options: --lt-debug and +# --lt-dump-script. There is, deliberately, no --lt-help. +# +# The first argument to this parsing function should be the +# script's $0 value, followed by "$@". +lt_option_debug= +func_parse_lt_options () +{ + lt_script_arg0=\$0 + shift + for lt_opt + do + case \"\$lt_opt\" in + --lt-debug) lt_option_debug=1 ;; + --lt-dump-script) + lt_dump_D=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%/[^/]*$%%'\` + test \"X\$lt_dump_D\" = \"X\$lt_script_arg0\" && lt_dump_D=. + lt_dump_F=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%^.*/%%'\` + cat \"\$lt_dump_D/\$lt_dump_F\" + exit 0 + ;; + --lt-*) + \$ECHO \"Unrecognized --lt- option: '\$lt_opt'\" 1>&2 + exit 1 + ;; + esac + done + + # Print the debug banner immediately: + if test -n \"\$lt_option_debug\"; then + echo \"${outputname}:${output}:\${LINENO}: libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\" 1>&2 + fi +} + +# Used when --lt-debug. Prints its arguments to stdout +# (redirection is the responsibility of the caller) +func_lt_dump_args () +{ + lt_dump_args_N=1; + for lt_arg + do + \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[\$lt_dump_args_N]: \$lt_arg\" + lt_dump_args_N=\`expr \$lt_dump_args_N + 1\` + done +} + +# Core function for launching the target application +func_exec_program_core () +{ +" + case $host in + # Backslashes separate directories on plain windows + *-*-mingw | *-*-os2* | *-cegcc*) + $ECHO "\ + if test -n \"\$lt_option_debug\"; then + \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir\\\\\$program\" 1>&2 + func_lt_dump_args \${1+\"\$@\"} 1>&2 + fi + exec \"\$progdir\\\\\$program\" \${1+\"\$@\"} +" + ;; + + *) + $ECHO "\ + if test -n \"\$lt_option_debug\"; then + \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir/\$program\" 1>&2 + func_lt_dump_args \${1+\"\$@\"} 1>&2 + fi + exec \"\$progdir/\$program\" \${1+\"\$@\"} +" + ;; + esac + $ECHO "\ + \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2 + exit 1 +} + +# A function to encapsulate launching the target application +# Strips options in the --lt-* namespace from \$@ and +# launches target application with the remaining arguments. +func_exec_program () +{ + for lt_wr_arg + do + case \$lt_wr_arg in + --lt-*) ;; + *) set x \"\$@\" \"\$lt_wr_arg\"; shift;; + esac + shift + done + func_exec_program_core \${1+\"\$@\"} +} + + # Parse options + func_parse_lt_options \"\$0\" \${1+\"\$@\"} + + # Find the directory that this script lives in. + thisdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*$%%'\` + test \"x\$thisdir\" = \"x\$file\" && thisdir=. + + # Follow symbolic links until we get to the real thisdir. + file=\`ls -ld \"\$file\" | $SED -n 's/.*-> //p'\` + while test -n \"\$file\"; do + destdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*\$%%'\` + + # If there was a directory component, then change thisdir. + if test \"x\$destdir\" != \"x\$file\"; then + case \"\$destdir\" in + [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;; + *) thisdir=\"\$thisdir/\$destdir\" ;; + esac + fi + + file=\`\$ECHO \"\$file\" | $SED 's%^.*/%%'\` + file=\`ls -ld \"\$thisdir/\$file\" | $SED -n 's/.*-> //p'\` + done + + # Usually 'no', except on cygwin/mingw when embedded into + # the cwrapper. + WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_arg1 + if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then + # special case for '.' + if test \"\$thisdir\" = \".\"; then + thisdir=\`pwd\` + fi + # remove .libs from thisdir + case \"\$thisdir\" in + *[\\\\/]$objdir ) thisdir=\`\$ECHO \"\$thisdir\" | $SED 's%[\\\\/][^\\\\/]*$%%'\` ;; + $objdir ) thisdir=. ;; + esac + fi + + # Try to get the absolute directory name. + absdir=\`cd \"\$thisdir\" && pwd\` + test -n \"\$absdir\" && thisdir=\"\$absdir\" +" + + if test "$fast_install" = yes; then + $ECHO "\ + program=lt-'$outputname'$exeext + progdir=\"\$thisdir/$objdir\" + + if test ! -f \"\$progdir/\$program\" || + { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\ + test \"X\$file\" != \"X\$progdir/\$program\"; }; then + + file=\"\$\$-\$program\" + + if test ! -d \"\$progdir\"; then + $MKDIR \"\$progdir\" + else + $RM \"\$progdir/\$file\" + fi" + + $ECHO "\ + + # relink executable if necessary + if test -n \"\$relink_command\"; then + if relink_command_output=\`eval \$relink_command 2>&1\`; then : + else + $ECHO \"\$relink_command_output\" >&2 + $RM \"\$progdir/\$file\" + exit 1 + fi + fi + + $MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null || + { $RM \"\$progdir/\$program\"; + $MV \"\$progdir/\$file\" \"\$progdir/\$program\"; } + $RM \"\$progdir/\$file\" + fi" + else + $ECHO "\ + program='$outputname' + progdir=\"\$thisdir/$objdir\" +" + fi + + $ECHO "\ + + if test -f \"\$progdir/\$program\"; then" + + # fixup the dll searchpath if we need to. + # + # Fix the DLL searchpath if we need to. Do this before prepending + # to shlibpath, because on Windows, both are PATH and uninstalled + # libraries must come first. + if test -n "$dllsearchpath"; then + $ECHO "\ + # Add the dll search path components to the executable PATH + PATH=$dllsearchpath:\$PATH +" + fi + + # Export our shlibpath_var if we have one. + if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then + $ECHO "\ + # Add our own library path to $shlibpath_var + $shlibpath_var=\"$temp_rpath\$$shlibpath_var\" + + # Some systems cannot cope with colon-terminated $shlibpath_var + # The second colon is a workaround for a bug in BeOS R4 sed + $shlibpath_var=\`\$ECHO \"\$$shlibpath_var\" | $SED 's/::*\$//'\` + + export $shlibpath_var +" + fi + + $ECHO "\ + if test \"\$libtool_execute_magic\" != \"$magic\"; then + # Run the actual program with our arguments. + func_exec_program \${1+\"\$@\"} + fi + else + # The program doesn't exist. + \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2 + \$ECHO \"This script is just a wrapper for \$program.\" 1>&2 + \$ECHO \"See the $PACKAGE documentation for more information.\" 1>&2 + exit 1 + fi +fi\ +" +} + + +# func_emit_cwrapperexe_src +# emit the source code for a wrapper executable on stdout +# Must ONLY be called from within func_mode_link because +# it depends on a number of variable set therein. +func_emit_cwrapperexe_src () +{ + cat < +#include +#ifdef _MSC_VER +# include +# include +# include +#else +# include +# include +# ifdef __CYGWIN__ +# include +# endif +#endif +#include +#include +#include +#include +#include +#include +#include +#include + +/* declarations of non-ANSI functions */ +#if defined(__MINGW32__) +# ifdef __STRICT_ANSI__ +int _putenv (const char *); +# endif +#elif defined(__CYGWIN__) +# ifdef __STRICT_ANSI__ +char *realpath (const char *, char *); +int putenv (char *); +int setenv (const char *, const char *, int); +# endif +/* #elif defined (other platforms) ... */ +#endif + +/* portability defines, excluding path handling macros */ +#if defined(_MSC_VER) +# define setmode _setmode +# define stat _stat +# define chmod _chmod +# define getcwd _getcwd +# define putenv _putenv +# define S_IXUSR _S_IEXEC +# ifndef _INTPTR_T_DEFINED +# define _INTPTR_T_DEFINED +# define intptr_t int +# endif +#elif defined(__MINGW32__) +# define setmode _setmode +# define stat _stat +# define chmod _chmod +# define getcwd _getcwd +# define putenv _putenv +#elif defined(__CYGWIN__) +# define HAVE_SETENV +# define FOPEN_WB "wb" +/* #elif defined (other platforms) ... */ +#endif + +#if defined(PATH_MAX) +# define LT_PATHMAX PATH_MAX +#elif defined(MAXPATHLEN) +# define LT_PATHMAX MAXPATHLEN +#else +# define LT_PATHMAX 1024 +#endif + +#ifndef S_IXOTH +# define S_IXOTH 0 +#endif +#ifndef S_IXGRP +# define S_IXGRP 0 +#endif + +/* path handling portability macros */ +#ifndef DIR_SEPARATOR +# define DIR_SEPARATOR '/' +# define PATH_SEPARATOR ':' +#endif + +#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \ + defined (__OS2__) +# define HAVE_DOS_BASED_FILE_SYSTEM +# define FOPEN_WB "wb" +# ifndef DIR_SEPARATOR_2 +# define DIR_SEPARATOR_2 '\\' +# endif +# ifndef PATH_SEPARATOR_2 +# define PATH_SEPARATOR_2 ';' +# endif +#endif + +#ifndef DIR_SEPARATOR_2 +# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR) +#else /* DIR_SEPARATOR_2 */ +# define IS_DIR_SEPARATOR(ch) \ + (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2)) +#endif /* DIR_SEPARATOR_2 */ + +#ifndef PATH_SEPARATOR_2 +# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR) +#else /* PATH_SEPARATOR_2 */ +# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2) +#endif /* PATH_SEPARATOR_2 */ + +#ifndef FOPEN_WB +# define FOPEN_WB "w" +#endif +#ifndef _O_BINARY +# define _O_BINARY 0 +#endif + +#define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type))) +#define XFREE(stale) do { \ + if (stale) { free ((void *) stale); stale = 0; } \ +} while (0) + +#if defined(LT_DEBUGWRAPPER) +static int lt_debug = 1; +#else +static int lt_debug = 0; +#endif + +const char *program_name = "libtool-wrapper"; /* in case xstrdup fails */ + +void *xmalloc (size_t num); +char *xstrdup (const char *string); +const char *base_name (const char *name); +char *find_executable (const char *wrapper); +char *chase_symlinks (const char *pathspec); +int make_executable (const char *path); +int check_executable (const char *path); +char *strendzap (char *str, const char *pat); +void lt_debugprintf (const char *file, int line, const char *fmt, ...); +void lt_fatal (const char *file, int line, const char *message, ...); +static const char *nonnull (const char *s); +static const char *nonempty (const char *s); +void lt_setenv (const char *name, const char *value); +char *lt_extend_str (const char *orig_value, const char *add, int to_end); +void lt_update_exe_path (const char *name, const char *value); +void lt_update_lib_path (const char *name, const char *value); +char **prepare_spawn (char **argv); +void lt_dump_script (FILE *f); +EOF + + cat <= 0) + && (st.st_mode & (S_IXUSR | S_IXGRP | S_IXOTH))) + return 1; + else + return 0; +} + +int +make_executable (const char *path) +{ + int rval = 0; + struct stat st; + + lt_debugprintf (__FILE__, __LINE__, "(make_executable): %s\n", + nonempty (path)); + if ((!path) || (!*path)) + return 0; + + if (stat (path, &st) >= 0) + { + rval = chmod (path, st.st_mode | S_IXOTH | S_IXGRP | S_IXUSR); + } + return rval; +} + +/* Searches for the full path of the wrapper. Returns + newly allocated full path name if found, NULL otherwise + Does not chase symlinks, even on platforms that support them. +*/ +char * +find_executable (const char *wrapper) +{ + int has_slash = 0; + const char *p; + const char *p_next; + /* static buffer for getcwd */ + char tmp[LT_PATHMAX + 1]; + int tmp_len; + char *concat_name; + + lt_debugprintf (__FILE__, __LINE__, "(find_executable): %s\n", + nonempty (wrapper)); + + if ((wrapper == NULL) || (*wrapper == '\0')) + return NULL; + + /* Absolute path? */ +#if defined (HAVE_DOS_BASED_FILE_SYSTEM) + if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':') + { + concat_name = xstrdup (wrapper); + if (check_executable (concat_name)) + return concat_name; + XFREE (concat_name); + } + else + { +#endif + if (IS_DIR_SEPARATOR (wrapper[0])) + { + concat_name = xstrdup (wrapper); + if (check_executable (concat_name)) + return concat_name; + XFREE (concat_name); + } +#if defined (HAVE_DOS_BASED_FILE_SYSTEM) + } +#endif + + for (p = wrapper; *p; p++) + if (*p == '/') + { + has_slash = 1; + break; + } + if (!has_slash) + { + /* no slashes; search PATH */ + const char *path = getenv ("PATH"); + if (path != NULL) + { + for (p = path; *p; p = p_next) + { + const char *q; + size_t p_len; + for (q = p; *q; q++) + if (IS_PATH_SEPARATOR (*q)) + break; + p_len = q - p; + p_next = (*q == '\0' ? q : q + 1); + if (p_len == 0) + { + /* empty path: current directory */ + if (getcwd (tmp, LT_PATHMAX) == NULL) + lt_fatal (__FILE__, __LINE__, "getcwd failed: %s", + nonnull (strerror (errno))); + tmp_len = strlen (tmp); + concat_name = + XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1); + memcpy (concat_name, tmp, tmp_len); + concat_name[tmp_len] = '/'; + strcpy (concat_name + tmp_len + 1, wrapper); + } + else + { + concat_name = + XMALLOC (char, p_len + 1 + strlen (wrapper) + 1); + memcpy (concat_name, p, p_len); + concat_name[p_len] = '/'; + strcpy (concat_name + p_len + 1, wrapper); + } + if (check_executable (concat_name)) + return concat_name; + XFREE (concat_name); + } + } + /* not found in PATH; assume curdir */ + } + /* Relative path | not found in path: prepend cwd */ + if (getcwd (tmp, LT_PATHMAX) == NULL) + lt_fatal (__FILE__, __LINE__, "getcwd failed: %s", + nonnull (strerror (errno))); + tmp_len = strlen (tmp); + concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1); + memcpy (concat_name, tmp, tmp_len); + concat_name[tmp_len] = '/'; + strcpy (concat_name + tmp_len + 1, wrapper); + + if (check_executable (concat_name)) + return concat_name; + XFREE (concat_name); + return NULL; +} + +char * +chase_symlinks (const char *pathspec) +{ +#ifndef S_ISLNK + return xstrdup (pathspec); +#else + char buf[LT_PATHMAX]; + struct stat s; + char *tmp_pathspec = xstrdup (pathspec); + char *p; + int has_symlinks = 0; + while (strlen (tmp_pathspec) && !has_symlinks) + { + lt_debugprintf (__FILE__, __LINE__, + "checking path component for symlinks: %s\n", + tmp_pathspec); + if (lstat (tmp_pathspec, &s) == 0) + { + if (S_ISLNK (s.st_mode) != 0) + { + has_symlinks = 1; + break; + } + + /* search backwards for last DIR_SEPARATOR */ + p = tmp_pathspec + strlen (tmp_pathspec) - 1; + while ((p > tmp_pathspec) && (!IS_DIR_SEPARATOR (*p))) + p--; + if ((p == tmp_pathspec) && (!IS_DIR_SEPARATOR (*p))) + { + /* no more DIR_SEPARATORS left */ + break; + } + *p = '\0'; + } + else + { + lt_fatal (__FILE__, __LINE__, + "error accessing file \"%s\": %s", + tmp_pathspec, nonnull (strerror (errno))); + } + } + XFREE (tmp_pathspec); + + if (!has_symlinks) + { + return xstrdup (pathspec); + } + + tmp_pathspec = realpath (pathspec, buf); + if (tmp_pathspec == 0) + { + lt_fatal (__FILE__, __LINE__, + "could not follow symlinks for %s", pathspec); + } + return xstrdup (tmp_pathspec); +#endif +} + +char * +strendzap (char *str, const char *pat) +{ + size_t len, patlen; + + assert (str != NULL); + assert (pat != NULL); + + len = strlen (str); + patlen = strlen (pat); + + if (patlen <= len) + { + str += len - patlen; + if (strcmp (str, pat) == 0) + *str = '\0'; + } + return str; +} + +void +lt_debugprintf (const char *file, int line, const char *fmt, ...) +{ + va_list args; + if (lt_debug) + { + (void) fprintf (stderr, "%s:%s:%d: ", program_name, file, line); + va_start (args, fmt); + (void) vfprintf (stderr, fmt, args); + va_end (args); + } +} + +static void +lt_error_core (int exit_status, const char *file, + int line, const char *mode, + const char *message, va_list ap) +{ + fprintf (stderr, "%s:%s:%d: %s: ", program_name, file, line, mode); + vfprintf (stderr, message, ap); + fprintf (stderr, ".\n"); + + if (exit_status >= 0) + exit (exit_status); +} + +void +lt_fatal (const char *file, int line, const char *message, ...) +{ + va_list ap; + va_start (ap, message); + lt_error_core (EXIT_FAILURE, file, line, "FATAL", message, ap); + va_end (ap); +} + +static const char * +nonnull (const char *s) +{ + return s ? s : "(null)"; +} + +static const char * +nonempty (const char *s) +{ + return (s && !*s) ? "(empty)" : nonnull (s); +} + +void +lt_setenv (const char *name, const char *value) +{ + lt_debugprintf (__FILE__, __LINE__, + "(lt_setenv) setting '%s' to '%s'\n", + nonnull (name), nonnull (value)); + { +#ifdef HAVE_SETENV + /* always make a copy, for consistency with !HAVE_SETENV */ + char *str = xstrdup (value); + setenv (name, str, 1); +#else + int len = strlen (name) + 1 + strlen (value) + 1; + char *str = XMALLOC (char, len); + sprintf (str, "%s=%s", name, value); + if (putenv (str) != EXIT_SUCCESS) + { + XFREE (str); + } +#endif + } +} + +char * +lt_extend_str (const char *orig_value, const char *add, int to_end) +{ + char *new_value; + if (orig_value && *orig_value) + { + int orig_value_len = strlen (orig_value); + int add_len = strlen (add); + new_value = XMALLOC (char, add_len + orig_value_len + 1); + if (to_end) + { + strcpy (new_value, orig_value); + strcpy (new_value + orig_value_len, add); + } + else + { + strcpy (new_value, add); + strcpy (new_value + add_len, orig_value); + } + } + else + { + new_value = xstrdup (add); + } + return new_value; +} + +void +lt_update_exe_path (const char *name, const char *value) +{ + lt_debugprintf (__FILE__, __LINE__, + "(lt_update_exe_path) modifying '%s' by prepending '%s'\n", + nonnull (name), nonnull (value)); + + if (name && *name && value && *value) + { + char *new_value = lt_extend_str (getenv (name), value, 0); + /* some systems can't cope with a ':'-terminated path #' */ + int len = strlen (new_value); + while (((len = strlen (new_value)) > 0) && IS_PATH_SEPARATOR (new_value[len-1])) + { + new_value[len-1] = '\0'; + } + lt_setenv (name, new_value); + XFREE (new_value); + } +} + +void +lt_update_lib_path (const char *name, const char *value) +{ + lt_debugprintf (__FILE__, __LINE__, + "(lt_update_lib_path) modifying '%s' by prepending '%s'\n", + nonnull (name), nonnull (value)); + + if (name && *name && value && *value) + { + char *new_value = lt_extend_str (getenv (name), value, 0); + lt_setenv (name, new_value); + XFREE (new_value); + } +} + +EOF + case $host_os in + mingw*) + cat <<"EOF" + +/* Prepares an argument vector before calling spawn(). + Note that spawn() does not by itself call the command interpreter + (getenv ("COMSPEC") != NULL ? getenv ("COMSPEC") : + ({ OSVERSIONINFO v; v.dwOSVersionInfoSize = sizeof(OSVERSIONINFO); + GetVersionEx(&v); + v.dwPlatformId == VER_PLATFORM_WIN32_NT; + }) ? "cmd.exe" : "command.com"). + Instead it simply concatenates the arguments, separated by ' ', and calls + CreateProcess(). We must quote the arguments since Win32 CreateProcess() + interprets characters like ' ', '\t', '\\', '"' (but not '<' and '>') in a + special way: + - Space and tab are interpreted as delimiters. They are not treated as + delimiters if they are surrounded by double quotes: "...". + - Unescaped double quotes are removed from the input. Their only effect is + that within double quotes, space and tab are treated like normal + characters. + - Backslashes not followed by double quotes are not special. + - But 2*n+1 backslashes followed by a double quote become + n backslashes followed by a double quote (n >= 0): + \" -> " + \\\" -> \" + \\\\\" -> \\" + */ +#define SHELL_SPECIAL_CHARS "\"\\ \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037" +#define SHELL_SPACE_CHARS " \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037" +char ** +prepare_spawn (char **argv) +{ + size_t argc; + char **new_argv; + size_t i; + + /* Count number of arguments. */ + for (argc = 0; argv[argc] != NULL; argc++) + ; + + /* Allocate new argument vector. */ + new_argv = XMALLOC (char *, argc + 1); + + /* Put quoted arguments into the new argument vector. */ + for (i = 0; i < argc; i++) + { + const char *string = argv[i]; + + if (string[0] == '\0') + new_argv[i] = xstrdup ("\"\""); + else if (strpbrk (string, SHELL_SPECIAL_CHARS) != NULL) + { + int quote_around = (strpbrk (string, SHELL_SPACE_CHARS) != NULL); + size_t length; + unsigned int backslashes; + const char *s; + char *quoted_string; + char *p; + + length = 0; + backslashes = 0; + if (quote_around) + length++; + for (s = string; *s != '\0'; s++) + { + char c = *s; + if (c == '"') + length += backslashes + 1; + length++; + if (c == '\\') + backslashes++; + else + backslashes = 0; + } + if (quote_around) + length += backslashes + 1; + + quoted_string = XMALLOC (char, length + 1); + + p = quoted_string; + backslashes = 0; + if (quote_around) + *p++ = '"'; + for (s = string; *s != '\0'; s++) + { + char c = *s; + if (c == '"') + { + unsigned int j; + for (j = backslashes + 1; j > 0; j--) + *p++ = '\\'; + } + *p++ = c; + if (c == '\\') + backslashes++; + else + backslashes = 0; + } + if (quote_around) + { + unsigned int j; + for (j = backslashes; j > 0; j--) + *p++ = '\\'; + *p++ = '"'; + } + *p = '\0'; + + new_argv[i] = quoted_string; + } + else + new_argv[i] = (char *) string; + } + new_argv[argc] = NULL; + + return new_argv; +} +EOF + ;; + esac + + cat <<"EOF" +void lt_dump_script (FILE* f) +{ +EOF + func_emit_wrapper yes | + $SED -e 's/\([\\"]\)/\\\1/g' \ + -e 's/^/ fputs ("/' -e 's/$/\\n", f);/' + + cat <<"EOF" +} +EOF +} +# end: func_emit_cwrapperexe_src + +# func_win32_import_lib_p ARG +# True if ARG is an import lib, as indicated by $file_magic_cmd +func_win32_import_lib_p () +{ + $opt_debug + case `eval $file_magic_cmd \"\$1\" 2>/dev/null | $SED -e 10q` in + *import*) : ;; + *) false ;; + esac +} + +# func_mode_link arg... +func_mode_link () +{ + $opt_debug + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) + # It is impossible to link a dll without this setting, and + # we shouldn't force the makefile maintainer to figure out + # which system we are compiling for in order to pass an extra + # flag for every libtool invocation. + # allow_undefined=no + + # FIXME: Unfortunately, there are problems with the above when trying + # to make a dll which has undefined symbols, in which case not + # even a static library is built. For now, we need to specify + # -no-undefined on the libtool link line when we can be certain + # that all symbols are satisfied, otherwise we get a static library. + allow_undefined=yes + ;; + *) + allow_undefined=yes + ;; + esac + libtool_args=$nonopt + base_compile="$nonopt $@" + compile_command=$nonopt + finalize_command=$nonopt + + compile_rpath= + finalize_rpath= + compile_shlibpath= + finalize_shlibpath= + convenience= + old_convenience= + deplibs= + old_deplibs= + compiler_flags= + linker_flags= + dllsearchpath= + lib_search_path=`pwd` + inst_prefix_dir= + new_inherited_linker_flags= + + avoid_version=no + bindir= + dlfiles= + dlprefiles= + dlself=no + export_dynamic=no + export_symbols= + export_symbols_regex= + generated= + libobjs= + ltlibs= + module=no + no_install=no + objs= + non_pic_objects= + precious_files_regex= + prefer_static_libs=no + preload=no + prev= + prevarg= + release= + rpath= + xrpath= + perm_rpath= + temp_rpath= + thread_safe=no + vinfo= + vinfo_number=no + weak_libs= + single_module="${wl}-single_module" + func_infer_tag $base_compile + + # We need to know -static, to get the right output filenames. + for arg + do + case $arg in + -shared) + test "$build_libtool_libs" != yes && \ + func_fatal_configuration "can not build a shared library" + build_old_libs=no + break + ;; + -all-static | -static | -static-libtool-libs) + case $arg in + -all-static) + if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then + func_warning "complete static linking is impossible in this configuration" + fi + if test -n "$link_static_flag"; then + dlopen_self=$dlopen_self_static + fi + prefer_static_libs=yes + ;; + -static) + if test -z "$pic_flag" && test -n "$link_static_flag"; then + dlopen_self=$dlopen_self_static + fi + prefer_static_libs=built + ;; + -static-libtool-libs) + if test -z "$pic_flag" && test -n "$link_static_flag"; then + dlopen_self=$dlopen_self_static + fi + prefer_static_libs=yes + ;; + esac + build_libtool_libs=no + build_old_libs=yes + break + ;; + esac + done + + # See if our shared archives depend on static archives. + test -n "$old_archive_from_new_cmds" && build_old_libs=yes + + # Go through the arguments, transforming them on the way. + while test "$#" -gt 0; do + arg="$1" + shift + func_quote_for_eval "$arg" + qarg=$func_quote_for_eval_unquoted_result + func_append libtool_args " $func_quote_for_eval_result" + + # If the previous option needs an argument, assign it. + if test -n "$prev"; then + case $prev in + output) + func_append compile_command " @OUTPUT@" + func_append finalize_command " @OUTPUT@" + ;; + esac + + case $prev in + bindir) + bindir="$arg" + prev= + continue + ;; + dlfiles|dlprefiles) + if test "$preload" = no; then + # Add the symbol object into the linking commands. + func_append compile_command " @SYMFILE@" + func_append finalize_command " @SYMFILE@" + preload=yes + fi + case $arg in + *.la | *.lo) ;; # We handle these cases below. + force) + if test "$dlself" = no; then + dlself=needless + export_dynamic=yes + fi + prev= + continue + ;; + self) + if test "$prev" = dlprefiles; then + dlself=yes + elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then + dlself=yes + else + dlself=needless + export_dynamic=yes + fi + prev= + continue + ;; + *) + if test "$prev" = dlfiles; then + func_append dlfiles " $arg" + else + func_append dlprefiles " $arg" + fi + prev= + continue + ;; + esac + ;; + expsyms) + export_symbols="$arg" + test -f "$arg" \ + || func_fatal_error "symbol file \`$arg' does not exist" + prev= + continue + ;; + expsyms_regex) + export_symbols_regex="$arg" + prev= + continue + ;; + framework) + case $host in + *-*-darwin*) + case "$deplibs " in + *" $qarg.ltframework "*) ;; + *) func_append deplibs " $qarg.ltframework" # this is fixed later + ;; + esac + ;; + esac + prev= + continue + ;; + inst_prefix) + inst_prefix_dir="$arg" + prev= + continue + ;; + objectlist) + if test -f "$arg"; then + save_arg=$arg + moreargs= + for fil in `cat "$save_arg"` + do +# func_append moreargs " $fil" + arg=$fil + # A libtool-controlled object. + + # Check to see that this really is a libtool object. + if func_lalib_unsafe_p "$arg"; then + pic_object= + non_pic_object= + + # Read the .lo file + func_source "$arg" + + if test -z "$pic_object" || + test -z "$non_pic_object" || + test "$pic_object" = none && + test "$non_pic_object" = none; then + func_fatal_error "cannot find name of object for \`$arg'" + fi + + # Extract subdirectory from the argument. + func_dirname "$arg" "/" "" + xdir="$func_dirname_result" + + if test "$pic_object" != none; then + # Prepend the subdirectory the object is found in. + pic_object="$xdir$pic_object" + + if test "$prev" = dlfiles; then + if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then + func_append dlfiles " $pic_object" + prev= + continue + else + # If libtool objects are unsupported, then we need to preload. + prev=dlprefiles + fi + fi + + # CHECK ME: I think I busted this. -Ossama + if test "$prev" = dlprefiles; then + # Preload the old-style object. + func_append dlprefiles " $pic_object" + prev= + fi + + # A PIC object. + func_append libobjs " $pic_object" + arg="$pic_object" + fi + + # Non-PIC object. + if test "$non_pic_object" != none; then + # Prepend the subdirectory the object is found in. + non_pic_object="$xdir$non_pic_object" + + # A standard non-PIC object + func_append non_pic_objects " $non_pic_object" + if test -z "$pic_object" || test "$pic_object" = none ; then + arg="$non_pic_object" + fi + else + # If the PIC object exists, use it instead. + # $xdir was prepended to $pic_object above. + non_pic_object="$pic_object" + func_append non_pic_objects " $non_pic_object" + fi + else + # Only an error if not doing a dry-run. + if $opt_dry_run; then + # Extract subdirectory from the argument. + func_dirname "$arg" "/" "" + xdir="$func_dirname_result" + + func_lo2o "$arg" + pic_object=$xdir$objdir/$func_lo2o_result + non_pic_object=$xdir$func_lo2o_result + func_append libobjs " $pic_object" + func_append non_pic_objects " $non_pic_object" + else + func_fatal_error "\`$arg' is not a valid libtool object" + fi + fi + done + else + func_fatal_error "link input file \`$arg' does not exist" + fi + arg=$save_arg + prev= + continue + ;; + precious_regex) + precious_files_regex="$arg" + prev= + continue + ;; + release) + release="-$arg" + prev= + continue + ;; + rpath | xrpath) + # We need an absolute path. + case $arg in + [\\/]* | [A-Za-z]:[\\/]*) ;; + *) + func_fatal_error "only absolute run-paths are allowed" + ;; + esac + if test "$prev" = rpath; then + case "$rpath " in + *" $arg "*) ;; + *) func_append rpath " $arg" ;; + esac + else + case "$xrpath " in + *" $arg "*) ;; + *) func_append xrpath " $arg" ;; + esac + fi + prev= + continue + ;; + shrext) + shrext_cmds="$arg" + prev= + continue + ;; + weak) + func_append weak_libs " $arg" + prev= + continue + ;; + xcclinker) + func_append linker_flags " $qarg" + func_append compiler_flags " $qarg" + prev= + func_append compile_command " $qarg" + func_append finalize_command " $qarg" + continue + ;; + xcompiler) + func_append compiler_flags " $qarg" + prev= + func_append compile_command " $qarg" + func_append finalize_command " $qarg" + continue + ;; + xlinker) + func_append linker_flags " $qarg" + func_append compiler_flags " $wl$qarg" + prev= + func_append compile_command " $wl$qarg" + func_append finalize_command " $wl$qarg" + continue + ;; + *) + eval "$prev=\"\$arg\"" + prev= + continue + ;; + esac + fi # test -n "$prev" + + prevarg="$arg" + + case $arg in + -all-static) + if test -n "$link_static_flag"; then + # See comment for -static flag below, for more details. + func_append compile_command " $link_static_flag" + func_append finalize_command " $link_static_flag" + fi + continue + ;; + + -allow-undefined) + # FIXME: remove this flag sometime in the future. + func_fatal_error "\`-allow-undefined' must not be used because it is the default" + ;; + + -avoid-version) + avoid_version=yes + continue + ;; + + -bindir) + prev=bindir + continue + ;; + + -dlopen) + prev=dlfiles + continue + ;; + + -dlpreopen) + prev=dlprefiles + continue + ;; + + -export-dynamic) + export_dynamic=yes + continue + ;; + + -export-symbols | -export-symbols-regex) + if test -n "$export_symbols" || test -n "$export_symbols_regex"; then + func_fatal_error "more than one -exported-symbols argument is not allowed" + fi + if test "X$arg" = "X-export-symbols"; then + prev=expsyms + else + prev=expsyms_regex + fi + continue + ;; + + -framework) + prev=framework + continue + ;; + + -inst-prefix-dir) + prev=inst_prefix + continue + ;; + + # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:* + # so, if we see these flags be careful not to treat them like -L + -L[A-Z][A-Z]*:*) + case $with_gcc/$host in + no/*-*-irix* | /*-*-irix*) + func_append compile_command " $arg" + func_append finalize_command " $arg" + ;; + esac + continue + ;; + + -L*) + func_stripname "-L" '' "$arg" + if test -z "$func_stripname_result"; then + if test "$#" -gt 0; then + func_fatal_error "require no space between \`-L' and \`$1'" + else + func_fatal_error "need path for \`-L' option" + fi + fi + func_resolve_sysroot "$func_stripname_result" + dir=$func_resolve_sysroot_result + # We need an absolute path. + case $dir in + [\\/]* | [A-Za-z]:[\\/]*) ;; + *) + absdir=`cd "$dir" && pwd` + test -z "$absdir" && \ + func_fatal_error "cannot determine absolute directory name of \`$dir'" + dir="$absdir" + ;; + esac + case "$deplibs " in + *" -L$dir "* | *" $arg "*) + # Will only happen for absolute or sysroot arguments + ;; + *) + # Preserve sysroot, but never include relative directories + case $dir in + [\\/]* | [A-Za-z]:[\\/]* | =*) func_append deplibs " $arg" ;; + *) func_append deplibs " -L$dir" ;; + esac + func_append lib_search_path " $dir" + ;; + esac + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) + testbindir=`$ECHO "$dir" | $SED 's*/lib$*/bin*'` + case :$dllsearchpath: in + *":$dir:"*) ;; + ::) dllsearchpath=$dir;; + *) func_append dllsearchpath ":$dir";; + esac + case :$dllsearchpath: in + *":$testbindir:"*) ;; + ::) dllsearchpath=$testbindir;; + *) func_append dllsearchpath ":$testbindir";; + esac + ;; + esac + continue + ;; + + -l*) + if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc* | *-*-haiku*) + # These systems don't actually have a C or math library (as such) + continue + ;; + *-*-os2*) + # These systems don't actually have a C library (as such) + test "X$arg" = "X-lc" && continue + ;; + *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) + # Do not include libc due to us having libc/libc_r. + test "X$arg" = "X-lc" && continue + ;; + *-*-rhapsody* | *-*-darwin1.[012]) + # Rhapsody C and math libraries are in the System framework + func_append deplibs " System.ltframework" + continue + ;; + *-*-sco3.2v5* | *-*-sco5v6*) + # Causes problems with __ctype + test "X$arg" = "X-lc" && continue + ;; + *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) + # Compiler inserts libc in the correct place for threads to work + test "X$arg" = "X-lc" && continue + ;; + esac + elif test "X$arg" = "X-lc_r"; then + case $host in + *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) + # Do not include libc_r directly, use -pthread flag. + continue + ;; + esac + fi + func_append deplibs " $arg" + continue + ;; + + -module) + module=yes + continue + ;; + + # Tru64 UNIX uses -model [arg] to determine the layout of C++ + # classes, name mangling, and exception handling. + # Darwin uses the -arch flag to determine output architecture. + -model|-arch|-isysroot|--sysroot) + func_append compiler_flags " $arg" + func_append compile_command " $arg" + func_append finalize_command " $arg" + prev=xcompiler + continue + ;; + + -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads) + func_append compiler_flags " $arg" + func_append compile_command " $arg" + func_append finalize_command " $arg" + case "$new_inherited_linker_flags " in + *" $arg "*) ;; + * ) func_append new_inherited_linker_flags " $arg" ;; + esac + continue + ;; + + -multi_module) + single_module="${wl}-multi_module" + continue + ;; + + -no-fast-install) + fast_install=no + continue + ;; + + -no-install) + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*) + # The PATH hackery in wrapper scripts is required on Windows + # and Darwin in order for the loader to find any dlls it needs. + func_warning "\`-no-install' is ignored for $host" + func_warning "assuming \`-no-fast-install' instead" + fast_install=no + ;; + *) no_install=yes ;; + esac + continue + ;; + + -no-undefined) + allow_undefined=no + continue + ;; + + -objectlist) + prev=objectlist + continue + ;; + + -o) prev=output ;; + + -precious-files-regex) + prev=precious_regex + continue + ;; + + -release) + prev=release + continue + ;; + + -rpath) + prev=rpath + continue + ;; + + -R) + prev=xrpath + continue + ;; + + -R*) + func_stripname '-R' '' "$arg" + dir=$func_stripname_result + # We need an absolute path. + case $dir in + [\\/]* | [A-Za-z]:[\\/]*) ;; + =*) + func_stripname '=' '' "$dir" + dir=$lt_sysroot$func_stripname_result + ;; + *) + func_fatal_error "only absolute run-paths are allowed" + ;; + esac + case "$xrpath " in + *" $dir "*) ;; + *) func_append xrpath " $dir" ;; + esac + continue + ;; + + -shared) + # The effects of -shared are defined in a previous loop. + continue + ;; + + -shrext) + prev=shrext + continue + ;; + + -static | -static-libtool-libs) + # The effects of -static are defined in a previous loop. + # We used to do the same as -all-static on platforms that + # didn't have a PIC flag, but the assumption that the effects + # would be equivalent was wrong. It would break on at least + # Digital Unix and AIX. + continue + ;; + + -thread-safe) + thread_safe=yes + continue + ;; + + -version-info) + prev=vinfo + continue + ;; + + -version-number) + prev=vinfo + vinfo_number=yes + continue + ;; + + -weak) + prev=weak + continue + ;; + + -Wc,*) + func_stripname '-Wc,' '' "$arg" + args=$func_stripname_result + arg= + save_ifs="$IFS"; IFS=',' + for flag in $args; do + IFS="$save_ifs" + func_quote_for_eval "$flag" + func_append arg " $func_quote_for_eval_result" + func_append compiler_flags " $func_quote_for_eval_result" + done + IFS="$save_ifs" + func_stripname ' ' '' "$arg" + arg=$func_stripname_result + ;; + + -Wl,*) + func_stripname '-Wl,' '' "$arg" + args=$func_stripname_result + arg= + save_ifs="$IFS"; IFS=',' + for flag in $args; do + IFS="$save_ifs" + func_quote_for_eval "$flag" + func_append arg " $wl$func_quote_for_eval_result" + func_append compiler_flags " $wl$func_quote_for_eval_result" + func_append linker_flags " $func_quote_for_eval_result" + done + IFS="$save_ifs" + func_stripname ' ' '' "$arg" + arg=$func_stripname_result + ;; + + -Xcompiler) + prev=xcompiler + continue + ;; + + -Xlinker) + prev=xlinker + continue + ;; + + -XCClinker) + prev=xcclinker + continue + ;; + + # -msg_* for osf cc + -msg_*) + func_quote_for_eval "$arg" + arg="$func_quote_for_eval_result" + ;; + + # Flags to be passed through unchanged, with rationale: + # -64, -mips[0-9] enable 64-bit mode for the SGI compiler + # -r[0-9][0-9]* specify processor for the SGI compiler + # -xarch=*, -xtarget=* enable 64-bit mode for the Sun compiler + # +DA*, +DD* enable 64-bit mode for the HP compiler + # -q* compiler args for the IBM compiler + # -m*, -t[45]*, -txscale* architecture-specific flags for GCC + # -F/path path to uninstalled frameworks, gcc on darwin + # -p, -pg, --coverage, -fprofile-* profiling flags for GCC + # @file GCC response files + # -tp=* Portland pgcc target processor selection + # --sysroot=* for sysroot support + # -O*, -flto*, -fwhopr*, -fuse-linker-plugin GCC link-time optimization + -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \ + -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*|-tp=*|--sysroot=*| \ + -O*|-flto*|-fwhopr*|-fuse-linker-plugin) + func_quote_for_eval "$arg" + arg="$func_quote_for_eval_result" + func_append compile_command " $arg" + func_append finalize_command " $arg" + func_append compiler_flags " $arg" + continue + ;; + + # Some other compiler flag. + -* | +*) + func_quote_for_eval "$arg" + arg="$func_quote_for_eval_result" + ;; + + *.$objext) + # A standard object. + func_append objs " $arg" + ;; + + *.lo) + # A libtool-controlled object. + + # Check to see that this really is a libtool object. + if func_lalib_unsafe_p "$arg"; then + pic_object= + non_pic_object= + + # Read the .lo file + func_source "$arg" + + if test -z "$pic_object" || + test -z "$non_pic_object" || + test "$pic_object" = none && + test "$non_pic_object" = none; then + func_fatal_error "cannot find name of object for \`$arg'" + fi + + # Extract subdirectory from the argument. + func_dirname "$arg" "/" "" + xdir="$func_dirname_result" + + if test "$pic_object" != none; then + # Prepend the subdirectory the object is found in. + pic_object="$xdir$pic_object" + + if test "$prev" = dlfiles; then + if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then + func_append dlfiles " $pic_object" + prev= + continue + else + # If libtool objects are unsupported, then we need to preload. + prev=dlprefiles + fi + fi + + # CHECK ME: I think I busted this. -Ossama + if test "$prev" = dlprefiles; then + # Preload the old-style object. + func_append dlprefiles " $pic_object" + prev= + fi + + # A PIC object. + func_append libobjs " $pic_object" + arg="$pic_object" + fi + + # Non-PIC object. + if test "$non_pic_object" != none; then + # Prepend the subdirectory the object is found in. + non_pic_object="$xdir$non_pic_object" + + # A standard non-PIC object + func_append non_pic_objects " $non_pic_object" + if test -z "$pic_object" || test "$pic_object" = none ; then + arg="$non_pic_object" + fi + else + # If the PIC object exists, use it instead. + # $xdir was prepended to $pic_object above. + non_pic_object="$pic_object" + func_append non_pic_objects " $non_pic_object" + fi + else + # Only an error if not doing a dry-run. + if $opt_dry_run; then + # Extract subdirectory from the argument. + func_dirname "$arg" "/" "" + xdir="$func_dirname_result" + + func_lo2o "$arg" + pic_object=$xdir$objdir/$func_lo2o_result + non_pic_object=$xdir$func_lo2o_result + func_append libobjs " $pic_object" + func_append non_pic_objects " $non_pic_object" + else + func_fatal_error "\`$arg' is not a valid libtool object" + fi + fi + ;; + + *.$libext) + # An archive. + func_append deplibs " $arg" + func_append old_deplibs " $arg" + continue + ;; + + *.la) + # A libtool-controlled library. + + func_resolve_sysroot "$arg" + if test "$prev" = dlfiles; then + # This library was specified with -dlopen. + func_append dlfiles " $func_resolve_sysroot_result" + prev= + elif test "$prev" = dlprefiles; then + # The library was specified with -dlpreopen. + func_append dlprefiles " $func_resolve_sysroot_result" + prev= + else + func_append deplibs " $func_resolve_sysroot_result" + fi + continue + ;; + + # Some other compiler argument. + *) + # Unknown arguments in both finalize_command and compile_command need + # to be aesthetically quoted because they are evaled later. + func_quote_for_eval "$arg" + arg="$func_quote_for_eval_result" + ;; + esac # arg + + # Now actually substitute the argument into the commands. + if test -n "$arg"; then + func_append compile_command " $arg" + func_append finalize_command " $arg" + fi + done # argument parsing loop + + test -n "$prev" && \ + func_fatal_help "the \`$prevarg' option requires an argument" + + if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then + eval arg=\"$export_dynamic_flag_spec\" + func_append compile_command " $arg" + func_append finalize_command " $arg" + fi + + oldlibs= + # calculate the name of the file, without its directory + func_basename "$output" + outputname="$func_basename_result" + libobjs_save="$libobjs" + + if test -n "$shlibpath_var"; then + # get the directories listed in $shlibpath_var + eval shlib_search_path=\`\$ECHO \"\${$shlibpath_var}\" \| \$SED \'s/:/ /g\'\` + else + shlib_search_path= + fi + eval sys_lib_search_path=\"$sys_lib_search_path_spec\" + eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\" + + func_dirname "$output" "/" "" + output_objdir="$func_dirname_result$objdir" + func_to_tool_file "$output_objdir/" + tool_output_objdir=$func_to_tool_file_result + # Create the object directory. + func_mkdir_p "$output_objdir" + + # Determine the type of output + case $output in + "") + func_fatal_help "you must specify an output file" + ;; + *.$libext) linkmode=oldlib ;; + *.lo | *.$objext) linkmode=obj ;; + *.la) linkmode=lib ;; + *) linkmode=prog ;; # Anything else should be a program. + esac + + specialdeplibs= + + libs= + # Find all interdependent deplibs by searching for libraries + # that are linked more than once (e.g. -la -lb -la) + for deplib in $deplibs; do + if $opt_preserve_dup_deps ; then + case "$libs " in + *" $deplib "*) func_append specialdeplibs " $deplib" ;; + esac + fi + func_append libs " $deplib" + done + + if test "$linkmode" = lib; then + libs="$predeps $libs $compiler_lib_search_path $postdeps" + + # Compute libraries that are listed more than once in $predeps + # $postdeps and mark them as special (i.e., whose duplicates are + # not to be eliminated). + pre_post_deps= + if $opt_duplicate_compiler_generated_deps; then + for pre_post_dep in $predeps $postdeps; do + case "$pre_post_deps " in + *" $pre_post_dep "*) func_append specialdeplibs " $pre_post_deps" ;; + esac + func_append pre_post_deps " $pre_post_dep" + done + fi + pre_post_deps= + fi + + deplibs= + newdependency_libs= + newlib_search_path= + need_relink=no # whether we're linking any uninstalled libtool libraries + notinst_deplibs= # not-installed libtool libraries + notinst_path= # paths that contain not-installed libtool libraries + + case $linkmode in + lib) + passes="conv dlpreopen link" + for file in $dlfiles $dlprefiles; do + case $file in + *.la) ;; + *) + func_fatal_help "libraries can \`-dlopen' only libtool libraries: $file" + ;; + esac + done + ;; + prog) + compile_deplibs= + finalize_deplibs= + alldeplibs=no + newdlfiles= + newdlprefiles= + passes="conv scan dlopen dlpreopen link" + ;; + *) passes="conv" + ;; + esac + + for pass in $passes; do + # The preopen pass in lib mode reverses $deplibs; put it back here + # so that -L comes before libs that need it for instance... + if test "$linkmode,$pass" = "lib,link"; then + ## FIXME: Find the place where the list is rebuilt in the wrong + ## order, and fix it there properly + tmp_deplibs= + for deplib in $deplibs; do + tmp_deplibs="$deplib $tmp_deplibs" + done + deplibs="$tmp_deplibs" + fi + + if test "$linkmode,$pass" = "lib,link" || + test "$linkmode,$pass" = "prog,scan"; then + libs="$deplibs" + deplibs= + fi + if test "$linkmode" = prog; then + case $pass in + dlopen) libs="$dlfiles" ;; + dlpreopen) libs="$dlprefiles" ;; + link) + libs="$deplibs %DEPLIBS%" + test "X$link_all_deplibs" != Xno && libs="$libs $dependency_libs" + ;; + esac + fi + if test "$linkmode,$pass" = "lib,dlpreopen"; then + # Collect and forward deplibs of preopened libtool libs + for lib in $dlprefiles; do + # Ignore non-libtool-libs + dependency_libs= + func_resolve_sysroot "$lib" + case $lib in + *.la) func_source "$func_resolve_sysroot_result" ;; + esac + + # Collect preopened libtool deplibs, except any this library + # has declared as weak libs + for deplib in $dependency_libs; do + func_basename "$deplib" + deplib_base=$func_basename_result + case " $weak_libs " in + *" $deplib_base "*) ;; + *) func_append deplibs " $deplib" ;; + esac + done + done + libs="$dlprefiles" + fi + if test "$pass" = dlopen; then + # Collect dlpreopened libraries + save_deplibs="$deplibs" + deplibs= + fi + + for deplib in $libs; do + lib= + found=no + case $deplib in + -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads) + if test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + func_append compiler_flags " $deplib" + if test "$linkmode" = lib ; then + case "$new_inherited_linker_flags " in + *" $deplib "*) ;; + * ) func_append new_inherited_linker_flags " $deplib" ;; + esac + fi + fi + continue + ;; + -l*) + if test "$linkmode" != lib && test "$linkmode" != prog; then + func_warning "\`-l' is ignored for archives/objects" + continue + fi + func_stripname '-l' '' "$deplib" + name=$func_stripname_result + if test "$linkmode" = lib; then + searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path" + else + searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path" + fi + for searchdir in $searchdirs; do + for search_ext in .la $std_shrext .so .a; do + # Search the libtool library + lib="$searchdir/lib${name}${search_ext}" + if test -f "$lib"; then + if test "$search_ext" = ".la"; then + found=yes + else + found=no + fi + break 2 + fi + done + done + if test "$found" != yes; then + # deplib doesn't seem to be a libtool library + if test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + deplibs="$deplib $deplibs" + test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" + fi + continue + else # deplib is a libtool library + # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib, + # We need to do some special things here, and not later. + if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then + case " $predeps $postdeps " in + *" $deplib "*) + if func_lalib_p "$lib"; then + library_names= + old_library= + func_source "$lib" + for l in $old_library $library_names; do + ll="$l" + done + if test "X$ll" = "X$old_library" ; then # only static version available + found=no + func_dirname "$lib" "" "." + ladir="$func_dirname_result" + lib=$ladir/$old_library + if test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + deplibs="$deplib $deplibs" + test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" + fi + continue + fi + fi + ;; + *) ;; + esac + fi + fi + ;; # -l + *.ltframework) + if test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + deplibs="$deplib $deplibs" + if test "$linkmode" = lib ; then + case "$new_inherited_linker_flags " in + *" $deplib "*) ;; + * ) func_append new_inherited_linker_flags " $deplib" ;; + esac + fi + fi + continue + ;; + -L*) + case $linkmode in + lib) + deplibs="$deplib $deplibs" + test "$pass" = conv && continue + newdependency_libs="$deplib $newdependency_libs" + func_stripname '-L' '' "$deplib" + func_resolve_sysroot "$func_stripname_result" + func_append newlib_search_path " $func_resolve_sysroot_result" + ;; + prog) + if test "$pass" = conv; then + deplibs="$deplib $deplibs" + continue + fi + if test "$pass" = scan; then + deplibs="$deplib $deplibs" + else + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + fi + func_stripname '-L' '' "$deplib" + func_resolve_sysroot "$func_stripname_result" + func_append newlib_search_path " $func_resolve_sysroot_result" + ;; + *) + func_warning "\`-L' is ignored for archives/objects" + ;; + esac # linkmode + continue + ;; # -L + -R*) + if test "$pass" = link; then + func_stripname '-R' '' "$deplib" + func_resolve_sysroot "$func_stripname_result" + dir=$func_resolve_sysroot_result + # Make sure the xrpath contains only unique directories. + case "$xrpath " in + *" $dir "*) ;; + *) func_append xrpath " $dir" ;; + esac + fi + deplibs="$deplib $deplibs" + continue + ;; + *.la) + func_resolve_sysroot "$deplib" + lib=$func_resolve_sysroot_result + ;; + *.$libext) + if test "$pass" = conv; then + deplibs="$deplib $deplibs" + continue + fi + case $linkmode in + lib) + # Linking convenience modules into shared libraries is allowed, + # but linking other static libraries is non-portable. + case " $dlpreconveniencelibs " in + *" $deplib "*) ;; + *) + valid_a_lib=no + case $deplibs_check_method in + match_pattern*) + set dummy $deplibs_check_method; shift + match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` + if eval "\$ECHO \"$deplib\"" 2>/dev/null | $SED 10q \ + | $EGREP "$match_pattern_regex" > /dev/null; then + valid_a_lib=yes + fi + ;; + pass_all) + valid_a_lib=yes + ;; + esac + if test "$valid_a_lib" != yes; then + echo + $ECHO "*** Warning: Trying to link with static lib archive $deplib." + echo "*** I have the capability to make that library automatically link in when" + echo "*** you link to this library. But I can only do this if you have a" + echo "*** shared version of the library, which you do not appear to have" + echo "*** because the file extensions .$libext of this argument makes me believe" + echo "*** that it is just a static archive that I should not use here." + else + echo + $ECHO "*** Warning: Linking the shared library $output against the" + $ECHO "*** static library $deplib is not portable!" + deplibs="$deplib $deplibs" + fi + ;; + esac + continue + ;; + prog) + if test "$pass" != link; then + deplibs="$deplib $deplibs" + else + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + fi + continue + ;; + esac # linkmode + ;; # *.$libext + *.lo | *.$objext) + if test "$pass" = conv; then + deplibs="$deplib $deplibs" + elif test "$linkmode" = prog; then + if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then + # If there is no dlopen support or we're linking statically, + # we need to preload. + func_append newdlprefiles " $deplib" + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + func_append newdlfiles " $deplib" + fi + fi + continue + ;; + %DEPLIBS%) + alldeplibs=yes + continue + ;; + esac # case $deplib + + if test "$found" = yes || test -f "$lib"; then : + else + func_fatal_error "cannot find the library \`$lib' or unhandled argument \`$deplib'" + fi + + # Check to see that this really is a libtool archive. + func_lalib_unsafe_p "$lib" \ + || func_fatal_error "\`$lib' is not a valid libtool archive" + + func_dirname "$lib" "" "." + ladir="$func_dirname_result" + + dlname= + dlopen= + dlpreopen= + libdir= + library_names= + old_library= + inherited_linker_flags= + # If the library was installed with an old release of libtool, + # it will not redefine variables installed, or shouldnotlink + installed=yes + shouldnotlink=no + avoidtemprpath= + + + # Read the .la file + func_source "$lib" + + # Convert "-framework foo" to "foo.ltframework" + if test -n "$inherited_linker_flags"; then + tmp_inherited_linker_flags=`$ECHO "$inherited_linker_flags" | $SED 's/-framework \([^ $]*\)/\1.ltframework/g'` + for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do + case " $new_inherited_linker_flags " in + *" $tmp_inherited_linker_flag "*) ;; + *) func_append new_inherited_linker_flags " $tmp_inherited_linker_flag";; + esac + done + fi + dependency_libs=`$ECHO " $dependency_libs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` + if test "$linkmode,$pass" = "lib,link" || + test "$linkmode,$pass" = "prog,scan" || + { test "$linkmode" != prog && test "$linkmode" != lib; }; then + test -n "$dlopen" && func_append dlfiles " $dlopen" + test -n "$dlpreopen" && func_append dlprefiles " $dlpreopen" + fi + + if test "$pass" = conv; then + # Only check for convenience libraries + deplibs="$lib $deplibs" + if test -z "$libdir"; then + if test -z "$old_library"; then + func_fatal_error "cannot find name of link library for \`$lib'" + fi + # It is a libtool convenience library, so add in its objects. + func_append convenience " $ladir/$objdir/$old_library" + func_append old_convenience " $ladir/$objdir/$old_library" + tmp_libs= + for deplib in $dependency_libs; do + deplibs="$deplib $deplibs" + if $opt_preserve_dup_deps ; then + case "$tmp_libs " in + *" $deplib "*) func_append specialdeplibs " $deplib" ;; + esac + fi + func_append tmp_libs " $deplib" + done + elif test "$linkmode" != prog && test "$linkmode" != lib; then + func_fatal_error "\`$lib' is not a convenience library" + fi + continue + fi # $pass = conv + + + # Get the name of the library we link against. + linklib= + if test -n "$old_library" && + { test "$prefer_static_libs" = yes || + test "$prefer_static_libs,$installed" = "built,no"; }; then + linklib=$old_library + else + for l in $old_library $library_names; do + linklib="$l" + done + fi + if test -z "$linklib"; then + func_fatal_error "cannot find name of link library for \`$lib'" + fi + + # This library was specified with -dlopen. + if test "$pass" = dlopen; then + if test -z "$libdir"; then + func_fatal_error "cannot -dlopen a convenience library: \`$lib'" + fi + if test -z "$dlname" || + test "$dlopen_support" != yes || + test "$build_libtool_libs" = no; then + # If there is no dlname, no dlopen support or we're linking + # statically, we need to preload. We also need to preload any + # dependent libraries so libltdl's deplib preloader doesn't + # bomb out in the load deplibs phase. + func_append dlprefiles " $lib $dependency_libs" + else + func_append newdlfiles " $lib" + fi + continue + fi # $pass = dlopen + + # We need an absolute path. + case $ladir in + [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;; + *) + abs_ladir=`cd "$ladir" && pwd` + if test -z "$abs_ladir"; then + func_warning "cannot determine absolute directory name of \`$ladir'" + func_warning "passing it literally to the linker, although it might fail" + abs_ladir="$ladir" + fi + ;; + esac + func_basename "$lib" + laname="$func_basename_result" + + # Find the relevant object directory and library name. + if test "X$installed" = Xyes; then + if test ! -f "$lt_sysroot$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then + func_warning "library \`$lib' was moved." + dir="$ladir" + absdir="$abs_ladir" + libdir="$abs_ladir" + else + dir="$lt_sysroot$libdir" + absdir="$lt_sysroot$libdir" + fi + test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes + else + if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then + dir="$ladir" + absdir="$abs_ladir" + # Remove this search path later + func_append notinst_path " $abs_ladir" + else + dir="$ladir/$objdir" + absdir="$abs_ladir/$objdir" + # Remove this search path later + func_append notinst_path " $abs_ladir" + fi + fi # $installed = yes + func_stripname 'lib' '.la' "$laname" + name=$func_stripname_result + + # This library was specified with -dlpreopen. + if test "$pass" = dlpreopen; then + if test -z "$libdir" && test "$linkmode" = prog; then + func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'" + fi + case "$host" in + # special handling for platforms with PE-DLLs. + *cygwin* | *mingw* | *cegcc* ) + # Linker will automatically link against shared library if both + # static and shared are present. Therefore, ensure we extract + # symbols from the import library if a shared library is present + # (otherwise, the dlopen module name will be incorrect). We do + # this by putting the import library name into $newdlprefiles. + # We recover the dlopen module name by 'saving' the la file + # name in a special purpose variable, and (later) extracting the + # dlname from the la file. + if test -n "$dlname"; then + func_tr_sh "$dir/$linklib" + eval "libfile_$func_tr_sh_result=\$abs_ladir/\$laname" + func_append newdlprefiles " $dir/$linklib" + else + func_append newdlprefiles " $dir/$old_library" + # Keep a list of preopened convenience libraries to check + # that they are being used correctly in the link pass. + test -z "$libdir" && \ + func_append dlpreconveniencelibs " $dir/$old_library" + fi + ;; + * ) + # Prefer using a static library (so that no silly _DYNAMIC symbols + # are required to link). + if test -n "$old_library"; then + func_append newdlprefiles " $dir/$old_library" + # Keep a list of preopened convenience libraries to check + # that they are being used correctly in the link pass. + test -z "$libdir" && \ + func_append dlpreconveniencelibs " $dir/$old_library" + # Otherwise, use the dlname, so that lt_dlopen finds it. + elif test -n "$dlname"; then + func_append newdlprefiles " $dir/$dlname" + else + func_append newdlprefiles " $dir/$linklib" + fi + ;; + esac + fi # $pass = dlpreopen + + if test -z "$libdir"; then + # Link the convenience library + if test "$linkmode" = lib; then + deplibs="$dir/$old_library $deplibs" + elif test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$dir/$old_library $compile_deplibs" + finalize_deplibs="$dir/$old_library $finalize_deplibs" + else + deplibs="$lib $deplibs" # used for prog,scan pass + fi + continue + fi + + + if test "$linkmode" = prog && test "$pass" != link; then + func_append newlib_search_path " $ladir" + deplibs="$lib $deplibs" + + linkalldeplibs=no + if test "$link_all_deplibs" != no || test -z "$library_names" || + test "$build_libtool_libs" = no; then + linkalldeplibs=yes + fi + + tmp_libs= + for deplib in $dependency_libs; do + case $deplib in + -L*) func_stripname '-L' '' "$deplib" + func_resolve_sysroot "$func_stripname_result" + func_append newlib_search_path " $func_resolve_sysroot_result" + ;; + esac + # Need to link against all dependency_libs? + if test "$linkalldeplibs" = yes; then + deplibs="$deplib $deplibs" + else + # Need to hardcode shared library paths + # or/and link against static libraries + newdependency_libs="$deplib $newdependency_libs" + fi + if $opt_preserve_dup_deps ; then + case "$tmp_libs " in + *" $deplib "*) func_append specialdeplibs " $deplib" ;; + esac + fi + func_append tmp_libs " $deplib" + done # for deplib + continue + fi # $linkmode = prog... + + if test "$linkmode,$pass" = "prog,link"; then + if test -n "$library_names" && + { { test "$prefer_static_libs" = no || + test "$prefer_static_libs,$installed" = "built,yes"; } || + test -z "$old_library"; }; then + # We need to hardcode the library path + if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then + # Make sure the rpath contains only unique directories. + case "$temp_rpath:" in + *"$absdir:"*) ;; + *) func_append temp_rpath "$absdir:" ;; + esac + fi + + # Hardcode the library path. + # Skip directories that are in the system default run-time + # search path. + case " $sys_lib_dlsearch_path " in + *" $absdir "*) ;; + *) + case "$compile_rpath " in + *" $absdir "*) ;; + *) func_append compile_rpath " $absdir" ;; + esac + ;; + esac + case " $sys_lib_dlsearch_path " in + *" $libdir "*) ;; + *) + case "$finalize_rpath " in + *" $libdir "*) ;; + *) func_append finalize_rpath " $libdir" ;; + esac + ;; + esac + fi # $linkmode,$pass = prog,link... + + if test "$alldeplibs" = yes && + { test "$deplibs_check_method" = pass_all || + { test "$build_libtool_libs" = yes && + test -n "$library_names"; }; }; then + # We only need to search for static libraries + continue + fi + fi + + link_static=no # Whether the deplib will be linked statically + use_static_libs=$prefer_static_libs + if test "$use_static_libs" = built && test "$installed" = yes; then + use_static_libs=no + fi + if test -n "$library_names" && + { test "$use_static_libs" = no || test -z "$old_library"; }; then + case $host in + *cygwin* | *mingw* | *cegcc*) + # No point in relinking DLLs because paths are not encoded + func_append notinst_deplibs " $lib" + need_relink=no + ;; + *) + if test "$installed" = no; then + func_append notinst_deplibs " $lib" + need_relink=yes + fi + ;; + esac + # This is a shared library + + # Warn about portability, can't link against -module's on some + # systems (darwin). Don't bleat about dlopened modules though! + dlopenmodule="" + for dlpremoduletest in $dlprefiles; do + if test "X$dlpremoduletest" = "X$lib"; then + dlopenmodule="$dlpremoduletest" + break + fi + done + if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then + echo + if test "$linkmode" = prog; then + $ECHO "*** Warning: Linking the executable $output against the loadable module" + else + $ECHO "*** Warning: Linking the shared library $output against the loadable module" + fi + $ECHO "*** $linklib is not portable!" + fi + if test "$linkmode" = lib && + test "$hardcode_into_libs" = yes; then + # Hardcode the library path. + # Skip directories that are in the system default run-time + # search path. + case " $sys_lib_dlsearch_path " in + *" $absdir "*) ;; + *) + case "$compile_rpath " in + *" $absdir "*) ;; + *) func_append compile_rpath " $absdir" ;; + esac + ;; + esac + case " $sys_lib_dlsearch_path " in + *" $libdir "*) ;; + *) + case "$finalize_rpath " in + *" $libdir "*) ;; + *) func_append finalize_rpath " $libdir" ;; + esac + ;; + esac + fi + + if test -n "$old_archive_from_expsyms_cmds"; then + # figure out the soname + set dummy $library_names + shift + realname="$1" + shift + libname=`eval "\\$ECHO \"$libname_spec\""` + # use dlname if we got it. it's perfectly good, no? + if test -n "$dlname"; then + soname="$dlname" + elif test -n "$soname_spec"; then + # bleh windows + case $host in + *cygwin* | mingw* | *cegcc*) + func_arith $current - $age + major=$func_arith_result + versuffix="-$major" + ;; + esac + eval soname=\"$soname_spec\" + else + soname="$realname" + fi + + # Make a new name for the extract_expsyms_cmds to use + soroot="$soname" + func_basename "$soroot" + soname="$func_basename_result" + func_stripname 'lib' '.dll' "$soname" + newlib=libimp-$func_stripname_result.a + + # If the library has no export list, then create one now + if test -f "$output_objdir/$soname-def"; then : + else + func_verbose "extracting exported symbol list from \`$soname'" + func_execute_cmds "$extract_expsyms_cmds" 'exit $?' + fi + + # Create $newlib + if test -f "$output_objdir/$newlib"; then :; else + func_verbose "generating import library for \`$soname'" + func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?' + fi + # make sure the library variables are pointing to the new library + dir=$output_objdir + linklib=$newlib + fi # test -n "$old_archive_from_expsyms_cmds" + + if test "$linkmode" = prog || test "$opt_mode" != relink; then + add_shlibpath= + add_dir= + add= + lib_linked=yes + case $hardcode_action in + immediate | unsupported) + if test "$hardcode_direct" = no; then + add="$dir/$linklib" + case $host in + *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;; + *-*-sysv4*uw2*) add_dir="-L$dir" ;; + *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \ + *-*-unixware7*) add_dir="-L$dir" ;; + *-*-darwin* ) + # if the lib is a (non-dlopened) module then we can not + # link against it, someone is ignoring the earlier warnings + if /usr/bin/file -L $add 2> /dev/null | + $GREP ": [^:]* bundle" >/dev/null ; then + if test "X$dlopenmodule" != "X$lib"; then + $ECHO "*** Warning: lib $linklib is a module, not a shared library" + if test -z "$old_library" ; then + echo + echo "*** And there doesn't seem to be a static archive available" + echo "*** The link will probably fail, sorry" + else + add="$dir/$old_library" + fi + elif test -n "$old_library"; then + add="$dir/$old_library" + fi + fi + esac + elif test "$hardcode_minus_L" = no; then + case $host in + *-*-sunos*) add_shlibpath="$dir" ;; + esac + add_dir="-L$dir" + add="-l$name" + elif test "$hardcode_shlibpath_var" = no; then + add_shlibpath="$dir" + add="-l$name" + else + lib_linked=no + fi + ;; + relink) + if test "$hardcode_direct" = yes && + test "$hardcode_direct_absolute" = no; then + add="$dir/$linklib" + elif test "$hardcode_minus_L" = yes; then + add_dir="-L$dir" + # Try looking first in the location we're being installed to. + if test -n "$inst_prefix_dir"; then + case $libdir in + [\\/]*) + func_append add_dir " -L$inst_prefix_dir$libdir" + ;; + esac + fi + add="-l$name" + elif test "$hardcode_shlibpath_var" = yes; then + add_shlibpath="$dir" + add="-l$name" + else + lib_linked=no + fi + ;; + *) lib_linked=no ;; + esac + + if test "$lib_linked" != yes; then + func_fatal_configuration "unsupported hardcode properties" + fi + + if test -n "$add_shlibpath"; then + case :$compile_shlibpath: in + *":$add_shlibpath:"*) ;; + *) func_append compile_shlibpath "$add_shlibpath:" ;; + esac + fi + if test "$linkmode" = prog; then + test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs" + test -n "$add" && compile_deplibs="$add $compile_deplibs" + else + test -n "$add_dir" && deplibs="$add_dir $deplibs" + test -n "$add" && deplibs="$add $deplibs" + if test "$hardcode_direct" != yes && + test "$hardcode_minus_L" != yes && + test "$hardcode_shlibpath_var" = yes; then + case :$finalize_shlibpath: in + *":$libdir:"*) ;; + *) func_append finalize_shlibpath "$libdir:" ;; + esac + fi + fi + fi + + if test "$linkmode" = prog || test "$opt_mode" = relink; then + add_shlibpath= + add_dir= + add= + # Finalize command for both is simple: just hardcode it. + if test "$hardcode_direct" = yes && + test "$hardcode_direct_absolute" = no; then + add="$libdir/$linklib" + elif test "$hardcode_minus_L" = yes; then + add_dir="-L$libdir" + add="-l$name" + elif test "$hardcode_shlibpath_var" = yes; then + case :$finalize_shlibpath: in + *":$libdir:"*) ;; + *) func_append finalize_shlibpath "$libdir:" ;; + esac + add="-l$name" + elif test "$hardcode_automatic" = yes; then + if test -n "$inst_prefix_dir" && + test -f "$inst_prefix_dir$libdir/$linklib" ; then + add="$inst_prefix_dir$libdir/$linklib" + else + add="$libdir/$linklib" + fi + else + # We cannot seem to hardcode it, guess we'll fake it. + add_dir="-L$libdir" + # Try looking first in the location we're being installed to. + if test -n "$inst_prefix_dir"; then + case $libdir in + [\\/]*) + func_append add_dir " -L$inst_prefix_dir$libdir" + ;; + esac + fi + add="-l$name" + fi + + if test "$linkmode" = prog; then + test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs" + test -n "$add" && finalize_deplibs="$add $finalize_deplibs" + else + test -n "$add_dir" && deplibs="$add_dir $deplibs" + test -n "$add" && deplibs="$add $deplibs" + fi + fi + elif test "$linkmode" = prog; then + # Here we assume that one of hardcode_direct or hardcode_minus_L + # is not unsupported. This is valid on all known static and + # shared platforms. + if test "$hardcode_direct" != unsupported; then + test -n "$old_library" && linklib="$old_library" + compile_deplibs="$dir/$linklib $compile_deplibs" + finalize_deplibs="$dir/$linklib $finalize_deplibs" + else + compile_deplibs="-l$name -L$dir $compile_deplibs" + finalize_deplibs="-l$name -L$dir $finalize_deplibs" + fi + elif test "$build_libtool_libs" = yes; then + # Not a shared library + if test "$deplibs_check_method" != pass_all; then + # We're trying link a shared library against a static one + # but the system doesn't support it. + + # Just print a warning and add the library to dependency_libs so + # that the program can be linked against the static library. + echo + $ECHO "*** Warning: This system can not link to static lib archive $lib." + echo "*** I have the capability to make that library automatically link in when" + echo "*** you link to this library. But I can only do this if you have a" + echo "*** shared version of the library, which you do not appear to have." + if test "$module" = yes; then + echo "*** But as you try to build a module library, libtool will still create " + echo "*** a static module, that should work as long as the dlopening application" + echo "*** is linked with the -dlopen flag to resolve symbols at runtime." + if test -z "$global_symbol_pipe"; then + echo + echo "*** However, this would only work if libtool was able to extract symbol" + echo "*** lists from a program, using \`nm' or equivalent, but libtool could" + echo "*** not find such a program. So, this module is probably useless." + echo "*** \`nm' from GNU binutils and a full rebuild may help." + fi + if test "$build_old_libs" = no; then + build_libtool_libs=module + build_old_libs=yes + else + build_libtool_libs=no + fi + fi + else + deplibs="$dir/$old_library $deplibs" + link_static=yes + fi + fi # link shared/static library? + + if test "$linkmode" = lib; then + if test -n "$dependency_libs" && + { test "$hardcode_into_libs" != yes || + test "$build_old_libs" = yes || + test "$link_static" = yes; }; then + # Extract -R from dependency_libs + temp_deplibs= + for libdir in $dependency_libs; do + case $libdir in + -R*) func_stripname '-R' '' "$libdir" + temp_xrpath=$func_stripname_result + case " $xrpath " in + *" $temp_xrpath "*) ;; + *) func_append xrpath " $temp_xrpath";; + esac;; + *) func_append temp_deplibs " $libdir";; + esac + done + dependency_libs="$temp_deplibs" + fi + + func_append newlib_search_path " $absdir" + # Link against this library + test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs" + # ... and its dependency_libs + tmp_libs= + for deplib in $dependency_libs; do + newdependency_libs="$deplib $newdependency_libs" + case $deplib in + -L*) func_stripname '-L' '' "$deplib" + func_resolve_sysroot "$func_stripname_result";; + *) func_resolve_sysroot "$deplib" ;; + esac + if $opt_preserve_dup_deps ; then + case "$tmp_libs " in + *" $func_resolve_sysroot_result "*) + func_append specialdeplibs " $func_resolve_sysroot_result" ;; + esac + fi + func_append tmp_libs " $func_resolve_sysroot_result" + done + + if test "$link_all_deplibs" != no; then + # Add the search paths of all dependency libraries + for deplib in $dependency_libs; do + path= + case $deplib in + -L*) path="$deplib" ;; + *.la) + func_resolve_sysroot "$deplib" + deplib=$func_resolve_sysroot_result + func_dirname "$deplib" "" "." + dir=$func_dirname_result + # We need an absolute path. + case $dir in + [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;; + *) + absdir=`cd "$dir" && pwd` + if test -z "$absdir"; then + func_warning "cannot determine absolute directory name of \`$dir'" + absdir="$dir" + fi + ;; + esac + if $GREP "^installed=no" $deplib > /dev/null; then + case $host in + *-*-darwin*) + depdepl= + eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib` + if test -n "$deplibrary_names" ; then + for tmp in $deplibrary_names ; do + depdepl=$tmp + done + if test -f "$absdir/$objdir/$depdepl" ; then + depdepl="$absdir/$objdir/$depdepl" + darwin_install_name=`${OTOOL} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'` + if test -z "$darwin_install_name"; then + darwin_install_name=`${OTOOL64} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'` + fi + func_append compiler_flags " ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}" + func_append linker_flags " -dylib_file ${darwin_install_name}:${depdepl}" + path= + fi + fi + ;; + *) + path="-L$absdir/$objdir" + ;; + esac + else + eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` + test -z "$libdir" && \ + func_fatal_error "\`$deplib' is not a valid libtool archive" + test "$absdir" != "$libdir" && \ + func_warning "\`$deplib' seems to be moved" + + path="-L$absdir" + fi + ;; + esac + case " $deplibs " in + *" $path "*) ;; + *) deplibs="$path $deplibs" ;; + esac + done + fi # link_all_deplibs != no + fi # linkmode = lib + done # for deplib in $libs + if test "$pass" = link; then + if test "$linkmode" = "prog"; then + compile_deplibs="$new_inherited_linker_flags $compile_deplibs" + finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs" + else + compiler_flags="$compiler_flags "`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` + fi + fi + dependency_libs="$newdependency_libs" + if test "$pass" = dlpreopen; then + # Link the dlpreopened libraries before other libraries + for deplib in $save_deplibs; do + deplibs="$deplib $deplibs" + done + fi + if test "$pass" != dlopen; then + if test "$pass" != conv; then + # Make sure lib_search_path contains only unique directories. + lib_search_path= + for dir in $newlib_search_path; do + case "$lib_search_path " in + *" $dir "*) ;; + *) func_append lib_search_path " $dir" ;; + esac + done + newlib_search_path= + fi + + if test "$linkmode,$pass" != "prog,link"; then + vars="deplibs" + else + vars="compile_deplibs finalize_deplibs" + fi + for var in $vars dependency_libs; do + # Add libraries to $var in reverse order + eval tmp_libs=\"\$$var\" + new_libs= + for deplib in $tmp_libs; do + # FIXME: Pedantically, this is the right thing to do, so + # that some nasty dependency loop isn't accidentally + # broken: + #new_libs="$deplib $new_libs" + # Pragmatically, this seems to cause very few problems in + # practice: + case $deplib in + -L*) new_libs="$deplib $new_libs" ;; + -R*) ;; + *) + # And here is the reason: when a library appears more + # than once as an explicit dependence of a library, or + # is implicitly linked in more than once by the + # compiler, it is considered special, and multiple + # occurrences thereof are not removed. Compare this + # with having the same library being listed as a + # dependency of multiple other libraries: in this case, + # we know (pedantically, we assume) the library does not + # need to be listed more than once, so we keep only the + # last copy. This is not always right, but it is rare + # enough that we require users that really mean to play + # such unportable linking tricks to link the library + # using -Wl,-lname, so that libtool does not consider it + # for duplicate removal. + case " $specialdeplibs " in + *" $deplib "*) new_libs="$deplib $new_libs" ;; + *) + case " $new_libs " in + *" $deplib "*) ;; + *) new_libs="$deplib $new_libs" ;; + esac + ;; + esac + ;; + esac + done + tmp_libs= + for deplib in $new_libs; do + case $deplib in + -L*) + case " $tmp_libs " in + *" $deplib "*) ;; + *) func_append tmp_libs " $deplib" ;; + esac + ;; + *) func_append tmp_libs " $deplib" ;; + esac + done + eval $var=\"$tmp_libs\" + done # for var + fi + # Last step: remove runtime libs from dependency_libs + # (they stay in deplibs) + tmp_libs= + for i in $dependency_libs ; do + case " $predeps $postdeps $compiler_lib_search_path " in + *" $i "*) + i="" + ;; + esac + if test -n "$i" ; then + func_append tmp_libs " $i" + fi + done + dependency_libs=$tmp_libs + done # for pass + if test "$linkmode" = prog; then + dlfiles="$newdlfiles" + fi + if test "$linkmode" = prog || test "$linkmode" = lib; then + dlprefiles="$newdlprefiles" + fi + + case $linkmode in + oldlib) + if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then + func_warning "\`-dlopen' is ignored for archives" + fi + + case " $deplibs" in + *\ -l* | *\ -L*) + func_warning "\`-l' and \`-L' are ignored for archives" ;; + esac + + test -n "$rpath" && \ + func_warning "\`-rpath' is ignored for archives" + + test -n "$xrpath" && \ + func_warning "\`-R' is ignored for archives" + + test -n "$vinfo" && \ + func_warning "\`-version-info/-version-number' is ignored for archives" + + test -n "$release" && \ + func_warning "\`-release' is ignored for archives" + + test -n "$export_symbols$export_symbols_regex" && \ + func_warning "\`-export-symbols' is ignored for archives" + + # Now set the variables for building old libraries. + build_libtool_libs=no + oldlibs="$output" + func_append objs "$old_deplibs" + ;; + + lib) + # Make sure we only generate libraries of the form `libNAME.la'. + case $outputname in + lib*) + func_stripname 'lib' '.la' "$outputname" + name=$func_stripname_result + eval shared_ext=\"$shrext_cmds\" + eval libname=\"$libname_spec\" + ;; + *) + test "$module" = no && \ + func_fatal_help "libtool library \`$output' must begin with \`lib'" + + if test "$need_lib_prefix" != no; then + # Add the "lib" prefix for modules if required + func_stripname '' '.la' "$outputname" + name=$func_stripname_result + eval shared_ext=\"$shrext_cmds\" + eval libname=\"$libname_spec\" + else + func_stripname '' '.la' "$outputname" + libname=$func_stripname_result + fi + ;; + esac + + if test -n "$objs"; then + if test "$deplibs_check_method" != pass_all; then + func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs" + else + echo + $ECHO "*** Warning: Linking the shared library $output against the non-libtool" + $ECHO "*** objects $objs is not portable!" + func_append libobjs " $objs" + fi + fi + + test "$dlself" != no && \ + func_warning "\`-dlopen self' is ignored for libtool libraries" + + set dummy $rpath + shift + test "$#" -gt 1 && \ + func_warning "ignoring multiple \`-rpath's for a libtool library" + + install_libdir="$1" + + oldlibs= + if test -z "$rpath"; then + if test "$build_libtool_libs" = yes; then + # Building a libtool convenience library. + # Some compilers have problems with a `.al' extension so + # convenience libraries should have the same extension an + # archive normally would. + oldlibs="$output_objdir/$libname.$libext $oldlibs" + build_libtool_libs=convenience + build_old_libs=yes + fi + + test -n "$vinfo" && \ + func_warning "\`-version-info/-version-number' is ignored for convenience libraries" + + test -n "$release" && \ + func_warning "\`-release' is ignored for convenience libraries" + else + + # Parse the version information argument. + save_ifs="$IFS"; IFS=':' + set dummy $vinfo 0 0 0 + shift + IFS="$save_ifs" + + test -n "$7" && \ + func_fatal_help "too many parameters to \`-version-info'" + + # convert absolute version numbers to libtool ages + # this retains compatibility with .la files and attempts + # to make the code below a bit more comprehensible + + case $vinfo_number in + yes) + number_major="$1" + number_minor="$2" + number_revision="$3" + # + # There are really only two kinds -- those that + # use the current revision as the major version + # and those that subtract age and use age as + # a minor version. But, then there is irix + # which has an extra 1 added just for fun + # + case $version_type in + darwin|linux|osf|windows|none) + func_arith $number_major + $number_minor + current=$func_arith_result + age="$number_minor" + revision="$number_revision" + ;; + freebsd-aout|freebsd-elf|qnx|sunos) + current="$number_major" + revision="$number_minor" + age="0" + ;; + irix|nonstopux) + func_arith $number_major + $number_minor + current=$func_arith_result + age="$number_minor" + revision="$number_minor" + lt_irix_increment=no + ;; + *) + func_fatal_configuration "$modename: unknown library version type \`$version_type'" + ;; + esac + ;; + no) + current="$1" + revision="$2" + age="$3" + ;; + esac + + # Check that each of the things are valid numbers. + case $current in + 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; + *) + func_error "CURRENT \`$current' must be a nonnegative integer" + func_fatal_error "\`$vinfo' is not valid version information" + ;; + esac + + case $revision in + 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; + *) + func_error "REVISION \`$revision' must be a nonnegative integer" + func_fatal_error "\`$vinfo' is not valid version information" + ;; + esac + + case $age in + 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; + *) + func_error "AGE \`$age' must be a nonnegative integer" + func_fatal_error "\`$vinfo' is not valid version information" + ;; + esac + + if test "$age" -gt "$current"; then + func_error "AGE \`$age' is greater than the current interface number \`$current'" + func_fatal_error "\`$vinfo' is not valid version information" + fi + + # Calculate the version variables. + major= + versuffix= + verstring= + case $version_type in + none) ;; + + darwin) + # Like Linux, but with the current version available in + # verstring for coding it into the library header + func_arith $current - $age + major=.$func_arith_result + versuffix="$major.$age.$revision" + # Darwin ld doesn't like 0 for these options... + func_arith $current + 1 + minor_current=$func_arith_result + xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision" + verstring="-compatibility_version $minor_current -current_version $minor_current.$revision" + ;; + + freebsd-aout) + major=".$current" + versuffix=".$current.$revision"; + ;; + + freebsd-elf) + major=".$current" + versuffix=".$current" + ;; + + irix | nonstopux) + if test "X$lt_irix_increment" = "Xno"; then + func_arith $current - $age + else + func_arith $current - $age + 1 + fi + major=$func_arith_result + + case $version_type in + nonstopux) verstring_prefix=nonstopux ;; + *) verstring_prefix=sgi ;; + esac + verstring="$verstring_prefix$major.$revision" + + # Add in all the interfaces that we are compatible with. + loop=$revision + while test "$loop" -ne 0; do + func_arith $revision - $loop + iface=$func_arith_result + func_arith $loop - 1 + loop=$func_arith_result + verstring="$verstring_prefix$major.$iface:$verstring" + done + + # Before this point, $major must not contain `.'. + major=.$major + versuffix="$major.$revision" + ;; + + linux) + func_arith $current - $age + major=.$func_arith_result + versuffix="$major.$age.$revision" + ;; + + osf) + func_arith $current - $age + major=.$func_arith_result + versuffix=".$current.$age.$revision" + verstring="$current.$age.$revision" + + # Add in all the interfaces that we are compatible with. + loop=$age + while test "$loop" -ne 0; do + func_arith $current - $loop + iface=$func_arith_result + func_arith $loop - 1 + loop=$func_arith_result + verstring="$verstring:${iface}.0" + done + + # Make executables depend on our current version. + func_append verstring ":${current}.0" + ;; + + qnx) + major=".$current" + versuffix=".$current" + ;; + + sunos) + major=".$current" + versuffix=".$current.$revision" + ;; + + windows) + # Use '-' rather than '.', since we only want one + # extension on DOS 8.3 filesystems. + func_arith $current - $age + major=$func_arith_result + versuffix="-$major" + ;; + + *) + func_fatal_configuration "unknown library version type \`$version_type'" + ;; + esac + + # Clear the version info if we defaulted, and they specified a release. + if test -z "$vinfo" && test -n "$release"; then + major= + case $version_type in + darwin) + # we can't check for "0.0" in archive_cmds due to quoting + # problems, so we reset it completely + verstring= + ;; + *) + verstring="0.0" + ;; + esac + if test "$need_version" = no; then + versuffix= + else + versuffix=".0.0" + fi + fi + + # Remove version info from name if versioning should be avoided + if test "$avoid_version" = yes && test "$need_version" = no; then + major= + versuffix= + verstring="" + fi + + # Check to see if the archive will have undefined symbols. + if test "$allow_undefined" = yes; then + if test "$allow_undefined_flag" = unsupported; then + func_warning "undefined symbols not allowed in $host shared libraries" + build_libtool_libs=no + build_old_libs=yes + fi + else + # Don't allow undefined symbols. + allow_undefined_flag="$no_undefined_flag" + fi + + fi + + func_generate_dlsyms "$libname" "$libname" "yes" + func_append libobjs " $symfileobj" + test "X$libobjs" = "X " && libobjs= + + if test "$opt_mode" != relink; then + # Remove our outputs, but don't remove object files since they + # may have been created when compiling PIC objects. + removelist= + tempremovelist=`$ECHO "$output_objdir/*"` + for p in $tempremovelist; do + case $p in + *.$objext | *.gcno) + ;; + $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*) + if test "X$precious_files_regex" != "X"; then + if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1 + then + continue + fi + fi + func_append removelist " $p" + ;; + *) ;; + esac + done + test -n "$removelist" && \ + func_show_eval "${RM}r \$removelist" + fi + + # Now set the variables for building old libraries. + if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then + func_append oldlibs " $output_objdir/$libname.$libext" + + # Transform .lo files to .o files. + oldobjs="$objs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; $lo2o" | $NL2SP` + fi + + # Eliminate all temporary directories. + #for path in $notinst_path; do + # lib_search_path=`$ECHO "$lib_search_path " | $SED "s% $path % %g"` + # deplibs=`$ECHO "$deplibs " | $SED "s% -L$path % %g"` + # dependency_libs=`$ECHO "$dependency_libs " | $SED "s% -L$path % %g"` + #done + + if test -n "$xrpath"; then + # If the user specified any rpath flags, then add them. + temp_xrpath= + for libdir in $xrpath; do + func_replace_sysroot "$libdir" + func_append temp_xrpath " -R$func_replace_sysroot_result" + case "$finalize_rpath " in + *" $libdir "*) ;; + *) func_append finalize_rpath " $libdir" ;; + esac + done + if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then + dependency_libs="$temp_xrpath $dependency_libs" + fi + fi + + # Make sure dlfiles contains only unique files that won't be dlpreopened + old_dlfiles="$dlfiles" + dlfiles= + for lib in $old_dlfiles; do + case " $dlprefiles $dlfiles " in + *" $lib "*) ;; + *) func_append dlfiles " $lib" ;; + esac + done + + # Make sure dlprefiles contains only unique files + old_dlprefiles="$dlprefiles" + dlprefiles= + for lib in $old_dlprefiles; do + case "$dlprefiles " in + *" $lib "*) ;; + *) func_append dlprefiles " $lib" ;; + esac + done + + if test "$build_libtool_libs" = yes; then + if test -n "$rpath"; then + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc* | *-*-haiku*) + # these systems don't actually have a c library (as such)! + ;; + *-*-rhapsody* | *-*-darwin1.[012]) + # Rhapsody C library is in the System framework + func_append deplibs " System.ltframework" + ;; + *-*-netbsd*) + # Don't link with libc until the a.out ld.so is fixed. + ;; + *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) + # Do not include libc due to us having libc/libc_r. + ;; + *-*-sco3.2v5* | *-*-sco5v6*) + # Causes problems with __ctype + ;; + *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) + # Compiler inserts libc in the correct place for threads to work + ;; + *) + # Add libc to deplibs on all other systems if necessary. + if test "$build_libtool_need_lc" = "yes"; then + func_append deplibs " -lc" + fi + ;; + esac + fi + + # Transform deplibs into only deplibs that can be linked in shared. + name_save=$name + libname_save=$libname + release_save=$release + versuffix_save=$versuffix + major_save=$major + # I'm not sure if I'm treating the release correctly. I think + # release should show up in the -l (ie -lgmp5) so we don't want to + # add it in twice. Is that correct? + release="" + versuffix="" + major="" + newdeplibs= + droppeddeps=no + case $deplibs_check_method in + pass_all) + # Don't check for shared/static. Everything works. + # This might be a little naive. We might want to check + # whether the library exists or not. But this is on + # osf3 & osf4 and I'm not really sure... Just + # implementing what was already the behavior. + newdeplibs=$deplibs + ;; + test_compile) + # This code stresses the "libraries are programs" paradigm to its + # limits. Maybe even breaks it. We compile a program, linking it + # against the deplibs as a proxy for the library. Then we can check + # whether they linked in statically or dynamically with ldd. + $opt_dry_run || $RM conftest.c + cat > conftest.c </dev/null` + $nocaseglob + else + potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null` + fi + for potent_lib in $potential_libs; do + # Follow soft links. + if ls -lLd "$potent_lib" 2>/dev/null | + $GREP " -> " >/dev/null; then + continue + fi + # The statement above tries to avoid entering an + # endless loop below, in case of cyclic links. + # We might still enter an endless loop, since a link + # loop can be closed while we follow links, + # but so what? + potlib="$potent_lib" + while test -h "$potlib" 2>/dev/null; do + potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'` + case $potliblink in + [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";; + *) potlib=`$ECHO "$potlib" | $SED 's,[^/]*$,,'`"$potliblink";; + esac + done + if eval $file_magic_cmd \"\$potlib\" 2>/dev/null | + $SED -e 10q | + $EGREP "$file_magic_regex" > /dev/null; then + func_append newdeplibs " $a_deplib" + a_deplib="" + break 2 + fi + done + done + fi + if test -n "$a_deplib" ; then + droppeddeps=yes + echo + $ECHO "*** Warning: linker path does not have real file for library $a_deplib." + echo "*** I have the capability to make that library automatically link in when" + echo "*** you link to this library. But I can only do this if you have a" + echo "*** shared version of the library, which you do not appear to have" + echo "*** because I did check the linker path looking for a file starting" + if test -z "$potlib" ; then + $ECHO "*** with $libname but no candidates were found. (...for file magic test)" + else + $ECHO "*** with $libname and none of the candidates passed a file format test" + $ECHO "*** using a file magic. Last file checked: $potlib" + fi + fi + ;; + *) + # Add a -L argument. + func_append newdeplibs " $a_deplib" + ;; + esac + done # Gone through all deplibs. + ;; + match_pattern*) + set dummy $deplibs_check_method; shift + match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` + for a_deplib in $deplibs; do + case $a_deplib in + -l*) + func_stripname -l '' "$a_deplib" + name=$func_stripname_result + if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then + case " $predeps $postdeps " in + *" $a_deplib "*) + func_append newdeplibs " $a_deplib" + a_deplib="" + ;; + esac + fi + if test -n "$a_deplib" ; then + libname=`eval "\\$ECHO \"$libname_spec\""` + for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do + potential_libs=`ls $i/$libname[.-]* 2>/dev/null` + for potent_lib in $potential_libs; do + potlib="$potent_lib" # see symlink-check above in file_magic test + if eval "\$ECHO \"$potent_lib\"" 2>/dev/null | $SED 10q | \ + $EGREP "$match_pattern_regex" > /dev/null; then + func_append newdeplibs " $a_deplib" + a_deplib="" + break 2 + fi + done + done + fi + if test -n "$a_deplib" ; then + droppeddeps=yes + echo + $ECHO "*** Warning: linker path does not have real file for library $a_deplib." + echo "*** I have the capability to make that library automatically link in when" + echo "*** you link to this library. But I can only do this if you have a" + echo "*** shared version of the library, which you do not appear to have" + echo "*** because I did check the linker path looking for a file starting" + if test -z "$potlib" ; then + $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)" + else + $ECHO "*** with $libname and none of the candidates passed a file format test" + $ECHO "*** using a regex pattern. Last file checked: $potlib" + fi + fi + ;; + *) + # Add a -L argument. + func_append newdeplibs " $a_deplib" + ;; + esac + done # Gone through all deplibs. + ;; + none | unknown | *) + newdeplibs="" + tmp_deplibs=`$ECHO " $deplibs" | $SED 's/ -lc$//; s/ -[LR][^ ]*//g'` + if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then + for i in $predeps $postdeps ; do + # can't use Xsed below, because $i might contain '/' + tmp_deplibs=`$ECHO " $tmp_deplibs" | $SED "s,$i,,"` + done + fi + case $tmp_deplibs in + *[!\ \ ]*) + echo + if test "X$deplibs_check_method" = "Xnone"; then + echo "*** Warning: inter-library dependencies are not supported in this platform." + else + echo "*** Warning: inter-library dependencies are not known to be supported." + fi + echo "*** All declared inter-library dependencies are being dropped." + droppeddeps=yes + ;; + esac + ;; + esac + versuffix=$versuffix_save + major=$major_save + release=$release_save + libname=$libname_save + name=$name_save + + case $host in + *-*-rhapsody* | *-*-darwin1.[012]) + # On Rhapsody replace the C library with the System framework + newdeplibs=`$ECHO " $newdeplibs" | $SED 's/ -lc / System.ltframework /'` + ;; + esac + + if test "$droppeddeps" = yes; then + if test "$module" = yes; then + echo + echo "*** Warning: libtool could not satisfy all declared inter-library" + $ECHO "*** dependencies of module $libname. Therefore, libtool will create" + echo "*** a static module, that should work as long as the dlopening" + echo "*** application is linked with the -dlopen flag." + if test -z "$global_symbol_pipe"; then + echo + echo "*** However, this would only work if libtool was able to extract symbol" + echo "*** lists from a program, using \`nm' or equivalent, but libtool could" + echo "*** not find such a program. So, this module is probably useless." + echo "*** \`nm' from GNU binutils and a full rebuild may help." + fi + if test "$build_old_libs" = no; then + oldlibs="$output_objdir/$libname.$libext" + build_libtool_libs=module + build_old_libs=yes + else + build_libtool_libs=no + fi + else + echo "*** The inter-library dependencies that have been dropped here will be" + echo "*** automatically added whenever a program is linked with this library" + echo "*** or is declared to -dlopen it." + + if test "$allow_undefined" = no; then + echo + echo "*** Since this library must not contain undefined symbols," + echo "*** because either the platform does not support them or" + echo "*** it was explicitly requested with -no-undefined," + echo "*** libtool will only create a static version of it." + if test "$build_old_libs" = no; then + oldlibs="$output_objdir/$libname.$libext" + build_libtool_libs=module + build_old_libs=yes + else + build_libtool_libs=no + fi + fi + fi + fi + # Done checking deplibs! + deplibs=$newdeplibs + fi + # Time to change all our "foo.ltframework" stuff back to "-framework foo" + case $host in + *-*-darwin*) + newdeplibs=`$ECHO " $newdeplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` + new_inherited_linker_flags=`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` + deplibs=`$ECHO " $deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` + ;; + esac + + # move library search paths that coincide with paths to not yet + # installed libraries to the beginning of the library search list + new_libs= + for path in $notinst_path; do + case " $new_libs " in + *" -L$path/$objdir "*) ;; + *) + case " $deplibs " in + *" -L$path/$objdir "*) + func_append new_libs " -L$path/$objdir" ;; + esac + ;; + esac + done + for deplib in $deplibs; do + case $deplib in + -L*) + case " $new_libs " in + *" $deplib "*) ;; + *) func_append new_libs " $deplib" ;; + esac + ;; + *) func_append new_libs " $deplib" ;; + esac + done + deplibs="$new_libs" + + # All the library-specific variables (install_libdir is set above). + library_names= + old_library= + dlname= + + # Test again, we may have decided not to build it any more + if test "$build_libtool_libs" = yes; then + if test "$hardcode_into_libs" = yes; then + # Hardcode the library paths + hardcode_libdirs= + dep_rpath= + rpath="$finalize_rpath" + test "$opt_mode" != relink && rpath="$compile_rpath$rpath" + for libdir in $rpath; do + if test -n "$hardcode_libdir_flag_spec"; then + if test -n "$hardcode_libdir_separator"; then + func_replace_sysroot "$libdir" + libdir=$func_replace_sysroot_result + if test -z "$hardcode_libdirs"; then + hardcode_libdirs="$libdir" + else + # Just accumulate the unique libdirs. + case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in + *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) + ;; + *) + func_append hardcode_libdirs "$hardcode_libdir_separator$libdir" + ;; + esac + fi + else + eval flag=\"$hardcode_libdir_flag_spec\" + func_append dep_rpath " $flag" + fi + elif test -n "$runpath_var"; then + case "$perm_rpath " in + *" $libdir "*) ;; + *) func_apped perm_rpath " $libdir" ;; + esac + fi + done + # Substitute the hardcoded libdirs into the rpath. + if test -n "$hardcode_libdir_separator" && + test -n "$hardcode_libdirs"; then + libdir="$hardcode_libdirs" + if test -n "$hardcode_libdir_flag_spec_ld"; then + eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\" + else + eval dep_rpath=\"$hardcode_libdir_flag_spec\" + fi + fi + if test -n "$runpath_var" && test -n "$perm_rpath"; then + # We should set the runpath_var. + rpath= + for dir in $perm_rpath; do + func_append rpath "$dir:" + done + eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var" + fi + test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs" + fi + + shlibpath="$finalize_shlibpath" + test "$opt_mode" != relink && shlibpath="$compile_shlibpath$shlibpath" + if test -n "$shlibpath"; then + eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var" + fi + + # Get the real and link names of the library. + eval shared_ext=\"$shrext_cmds\" + eval library_names=\"$library_names_spec\" + set dummy $library_names + shift + realname="$1" + shift + + if test -n "$soname_spec"; then + eval soname=\"$soname_spec\" + else + soname="$realname" + fi + if test -z "$dlname"; then + dlname=$soname + fi + + lib="$output_objdir/$realname" + linknames= + for link + do + func_append linknames " $link" + done + + # Use standard objects if they are pic + test -z "$pic_flag" && libobjs=`$ECHO "$libobjs" | $SP2NL | $SED "$lo2o" | $NL2SP` + test "X$libobjs" = "X " && libobjs= + + delfiles= + if test -n "$export_symbols" && test -n "$include_expsyms"; then + $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp" + export_symbols="$output_objdir/$libname.uexp" + func_append delfiles " $export_symbols" + fi + + orig_export_symbols= + case $host_os in + cygwin* | mingw* | cegcc*) + if test -n "$export_symbols" && test -z "$export_symbols_regex"; then + # exporting using user supplied symfile + if test "x`$SED 1q $export_symbols`" != xEXPORTS; then + # and it's NOT already a .def file. Must figure out + # which of the given symbols are data symbols and tag + # them as such. So, trigger use of export_symbols_cmds. + # export_symbols gets reassigned inside the "prepare + # the list of exported symbols" if statement, so the + # include_expsyms logic still works. + orig_export_symbols="$export_symbols" + export_symbols= + always_export_symbols=yes + fi + fi + ;; + esac + + # Prepare the list of exported symbols + if test -z "$export_symbols"; then + if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then + func_verbose "generating symbol list for \`$libname.la'" + export_symbols="$output_objdir/$libname.exp" + $opt_dry_run || $RM $export_symbols + cmds=$export_symbols_cmds + save_ifs="$IFS"; IFS='~' + for cmd1 in $cmds; do + IFS="$save_ifs" + # Take the normal branch if the nm_file_list_spec branch + # doesn't work or if tool conversion is not needed. + case $nm_file_list_spec~$to_tool_file_cmd in + *~func_convert_file_noop | *~func_convert_file_msys_to_w32 | ~*) + try_normal_branch=yes + eval cmd=\"$cmd1\" + func_len " $cmd" + len=$func_len_result + ;; + *) + try_normal_branch=no + ;; + esac + if test "$try_normal_branch" = yes \ + && { test "$len" -lt "$max_cmd_len" \ + || test "$max_cmd_len" -le -1; } + then + func_show_eval "$cmd" 'exit $?' + skipped_export=false + elif test -n "$nm_file_list_spec"; then + func_basename "$output" + output_la=$func_basename_result + save_libobjs=$libobjs + save_output=$output + output=${output_objdir}/${output_la}.nm + func_to_tool_file "$output" + libobjs=$nm_file_list_spec$func_to_tool_file_result + func_append delfiles " $output" + func_verbose "creating $NM input file list: $output" + for obj in $save_libobjs; do + func_to_tool_file "$obj" + $ECHO "$func_to_tool_file_result" + done > "$output" + eval cmd=\"$cmd1\" + func_show_eval "$cmd" 'exit $?' + output=$save_output + libobjs=$save_libobjs + skipped_export=false + else + # The command line is too long to execute in one step. + func_verbose "using reloadable object file for export list..." + skipped_export=: + # Break out early, otherwise skipped_export may be + # set to false by a later but shorter cmd. + break + fi + done + IFS="$save_ifs" + if test -n "$export_symbols_regex" && test "X$skipped_export" != "X:"; then + func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' + func_show_eval '$MV "${export_symbols}T" "$export_symbols"' + fi + fi + fi + + if test -n "$export_symbols" && test -n "$include_expsyms"; then + tmp_export_symbols="$export_symbols" + test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols" + $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"' + fi + + if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then + # The given exports_symbols file has to be filtered, so filter it. + func_verbose "filter symbol list for \`$libname.la' to tag DATA exports" + # FIXME: $output_objdir/$libname.filter potentially contains lots of + # 's' commands which not all seds can handle. GNU sed should be fine + # though. Also, the filter scales superlinearly with the number of + # global variables. join(1) would be nice here, but unfortunately + # isn't a blessed tool. + $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter + func_append delfiles " $export_symbols $output_objdir/$libname.filter" + export_symbols=$output_objdir/$libname.def + $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols + fi + + tmp_deplibs= + for test_deplib in $deplibs; do + case " $convenience " in + *" $test_deplib "*) ;; + *) + func_append tmp_deplibs " $test_deplib" + ;; + esac + done + deplibs="$tmp_deplibs" + + if test -n "$convenience"; then + if test -n "$whole_archive_flag_spec" && + test "$compiler_needs_object" = yes && + test -z "$libobjs"; then + # extract the archives, so we have objects to list. + # TODO: could optimize this to just extract one archive. + whole_archive_flag_spec= + fi + if test -n "$whole_archive_flag_spec"; then + save_libobjs=$libobjs + eval libobjs=\"\$libobjs $whole_archive_flag_spec\" + test "X$libobjs" = "X " && libobjs= + else + gentop="$output_objdir/${outputname}x" + func_append generated " $gentop" + + func_extract_archives $gentop $convenience + func_append libobjs " $func_extract_archives_result" + test "X$libobjs" = "X " && libobjs= + fi + fi + + if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then + eval flag=\"$thread_safe_flag_spec\" + func_append linker_flags " $flag" + fi + + # Make a backup of the uninstalled library when relinking + if test "$opt_mode" = relink; then + $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $? + fi + + # Do each of the archive commands. + if test "$module" = yes && test -n "$module_cmds" ; then + if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then + eval test_cmds=\"$module_expsym_cmds\" + cmds=$module_expsym_cmds + else + eval test_cmds=\"$module_cmds\" + cmds=$module_cmds + fi + else + if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then + eval test_cmds=\"$archive_expsym_cmds\" + cmds=$archive_expsym_cmds + else + eval test_cmds=\"$archive_cmds\" + cmds=$archive_cmds + fi + fi + + if test "X$skipped_export" != "X:" && + func_len " $test_cmds" && + len=$func_len_result && + test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then + : + else + # The command line is too long to link in one step, link piecewise + # or, if using GNU ld and skipped_export is not :, use a linker + # script. + + # Save the value of $output and $libobjs because we want to + # use them later. If we have whole_archive_flag_spec, we + # want to use save_libobjs as it was before + # whole_archive_flag_spec was expanded, because we can't + # assume the linker understands whole_archive_flag_spec. + # This may have to be revisited, in case too many + # convenience libraries get linked in and end up exceeding + # the spec. + if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then + save_libobjs=$libobjs + fi + save_output=$output + func_basename "$output" + output_la=$func_basename_result + + # Clear the reloadable object creation command queue and + # initialize k to one. + test_cmds= + concat_cmds= + objlist= + last_robj= + k=1 + + if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then + output=${output_objdir}/${output_la}.lnkscript + func_verbose "creating GNU ld script: $output" + echo 'INPUT (' > $output + for obj in $save_libobjs + do + func_to_tool_file "$obj" + $ECHO "$func_to_tool_file_result" >> $output + done + echo ')' >> $output + func_append delfiles " $output" + func_to_tool_file "$output" + output=$func_to_tool_file_result + elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then + output=${output_objdir}/${output_la}.lnk + func_verbose "creating linker input file list: $output" + : > $output + set x $save_libobjs + shift + firstobj= + if test "$compiler_needs_object" = yes; then + firstobj="$1 " + shift + fi + for obj + do + func_to_tool_file "$obj" + $ECHO "$func_to_tool_file_result" >> $output + done + func_append delfiles " $output" + func_to_tool_file "$output" + output=$firstobj\"$file_list_spec$func_to_tool_file_result\" + else + if test -n "$save_libobjs"; then + func_verbose "creating reloadable object files..." + output=$output_objdir/$output_la-${k}.$objext + eval test_cmds=\"$reload_cmds\" + func_len " $test_cmds" + len0=$func_len_result + len=$len0 + + # Loop over the list of objects to be linked. + for obj in $save_libobjs + do + func_len " $obj" + func_arith $len + $func_len_result + len=$func_arith_result + if test "X$objlist" = X || + test "$len" -lt "$max_cmd_len"; then + func_append objlist " $obj" + else + # The command $test_cmds is almost too long, add a + # command to the queue. + if test "$k" -eq 1 ; then + # The first file doesn't have a previous command to add. + reload_objs=$objlist + eval concat_cmds=\"$reload_cmds\" + else + # All subsequent reloadable object files will link in + # the last one created. + reload_objs="$objlist $last_robj" + eval concat_cmds=\"\$concat_cmds~$reload_cmds~\$RM $last_robj\" + fi + last_robj=$output_objdir/$output_la-${k}.$objext + func_arith $k + 1 + k=$func_arith_result + output=$output_objdir/$output_la-${k}.$objext + objlist=" $obj" + func_len " $last_robj" + func_arith $len0 + $func_len_result + len=$func_arith_result + fi + done + # Handle the remaining objects by creating one last + # reloadable object file. All subsequent reloadable object + # files will link in the last one created. + test -z "$concat_cmds" || concat_cmds=$concat_cmds~ + reload_objs="$objlist $last_robj" + eval concat_cmds=\"\${concat_cmds}$reload_cmds\" + if test -n "$last_robj"; then + eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\" + fi + func_append delfiles " $output" + + else + output= + fi + + if ${skipped_export-false}; then + func_verbose "generating symbol list for \`$libname.la'" + export_symbols="$output_objdir/$libname.exp" + $opt_dry_run || $RM $export_symbols + libobjs=$output + # Append the command to create the export file. + test -z "$concat_cmds" || concat_cmds=$concat_cmds~ + eval concat_cmds=\"\$concat_cmds$export_symbols_cmds\" + if test -n "$last_robj"; then + eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\" + fi + fi + + test -n "$save_libobjs" && + func_verbose "creating a temporary reloadable object file: $output" + + # Loop through the commands generated above and execute them. + save_ifs="$IFS"; IFS='~' + for cmd in $concat_cmds; do + IFS="$save_ifs" + $opt_silent || { + func_quote_for_expand "$cmd" + eval "func_echo $func_quote_for_expand_result" + } + $opt_dry_run || eval "$cmd" || { + lt_exit=$? + + # Restore the uninstalled library and exit + if test "$opt_mode" = relink; then + ( cd "$output_objdir" && \ + $RM "${realname}T" && \ + $MV "${realname}U" "$realname" ) + fi + + exit $lt_exit + } + done + IFS="$save_ifs" + + if test -n "$export_symbols_regex" && ${skipped_export-false}; then + func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' + func_show_eval '$MV "${export_symbols}T" "$export_symbols"' + fi + fi + + if ${skipped_export-false}; then + if test -n "$export_symbols" && test -n "$include_expsyms"; then + tmp_export_symbols="$export_symbols" + test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols" + $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"' + fi + + if test -n "$orig_export_symbols"; then + # The given exports_symbols file has to be filtered, so filter it. + func_verbose "filter symbol list for \`$libname.la' to tag DATA exports" + # FIXME: $output_objdir/$libname.filter potentially contains lots of + # 's' commands which not all seds can handle. GNU sed should be fine + # though. Also, the filter scales superlinearly with the number of + # global variables. join(1) would be nice here, but unfortunately + # isn't a blessed tool. + $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter + func_append delfiles " $export_symbols $output_objdir/$libname.filter" + export_symbols=$output_objdir/$libname.def + $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols + fi + fi + + libobjs=$output + # Restore the value of output. + output=$save_output + + if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then + eval libobjs=\"\$libobjs $whole_archive_flag_spec\" + test "X$libobjs" = "X " && libobjs= + fi + # Expand the library linking commands again to reset the + # value of $libobjs for piecewise linking. + + # Do each of the archive commands. + if test "$module" = yes && test -n "$module_cmds" ; then + if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then + cmds=$module_expsym_cmds + else + cmds=$module_cmds + fi + else + if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then + cmds=$archive_expsym_cmds + else + cmds=$archive_cmds + fi + fi + fi + + if test -n "$delfiles"; then + # Append the command to remove temporary files to $cmds. + eval cmds=\"\$cmds~\$RM $delfiles\" + fi + + # Add any objects from preloaded convenience libraries + if test -n "$dlprefiles"; then + gentop="$output_objdir/${outputname}x" + func_append generated " $gentop" + + func_extract_archives $gentop $dlprefiles + func_append libobjs " $func_extract_archives_result" + test "X$libobjs" = "X " && libobjs= + fi + + save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + eval cmd=\"$cmd\" + $opt_silent || { + func_quote_for_expand "$cmd" + eval "func_echo $func_quote_for_expand_result" + } + $opt_dry_run || eval "$cmd" || { + lt_exit=$? + + # Restore the uninstalled library and exit + if test "$opt_mode" = relink; then + ( cd "$output_objdir" && \ + $RM "${realname}T" && \ + $MV "${realname}U" "$realname" ) + fi + + exit $lt_exit + } + done + IFS="$save_ifs" + + # Restore the uninstalled library and exit + if test "$opt_mode" = relink; then + $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $? + + if test -n "$convenience"; then + if test -z "$whole_archive_flag_spec"; then + func_show_eval '${RM}r "$gentop"' + fi + fi + + exit $EXIT_SUCCESS + fi + + # Create links to the real library. + for linkname in $linknames; do + if test "$realname" != "$linkname"; then + func_show_eval '(cd "$output_objdir" && $RM "$linkname" && $LN_S "$realname" "$linkname")' 'exit $?' + fi + done + + # If -module or -export-dynamic was specified, set the dlname. + if test "$module" = yes || test "$export_dynamic" = yes; then + # On all known operating systems, these are identical. + dlname="$soname" + fi + fi + ;; + + obj) + if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then + func_warning "\`-dlopen' is ignored for objects" + fi + + case " $deplibs" in + *\ -l* | *\ -L*) + func_warning "\`-l' and \`-L' are ignored for objects" ;; + esac + + test -n "$rpath" && \ + func_warning "\`-rpath' is ignored for objects" + + test -n "$xrpath" && \ + func_warning "\`-R' is ignored for objects" + + test -n "$vinfo" && \ + func_warning "\`-version-info' is ignored for objects" + + test -n "$release" && \ + func_warning "\`-release' is ignored for objects" + + case $output in + *.lo) + test -n "$objs$old_deplibs" && \ + func_fatal_error "cannot build library object \`$output' from non-libtool objects" + + libobj=$output + func_lo2o "$libobj" + obj=$func_lo2o_result + ;; + *) + libobj= + obj="$output" + ;; + esac + + # Delete the old objects. + $opt_dry_run || $RM $obj $libobj + + # Objects from convenience libraries. This assumes + # single-version convenience libraries. Whenever we create + # different ones for PIC/non-PIC, this we'll have to duplicate + # the extraction. + reload_conv_objs= + gentop= + # reload_cmds runs $LD directly, so let us get rid of + # -Wl from whole_archive_flag_spec and hope we can get by with + # turning comma into space.. + wl= + + if test -n "$convenience"; then + if test -n "$whole_archive_flag_spec"; then + eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\" + reload_conv_objs=$reload_objs\ `$ECHO "$tmp_whole_archive_flags" | $SED 's|,| |g'` + else + gentop="$output_objdir/${obj}x" + func_append generated " $gentop" + + func_extract_archives $gentop $convenience + reload_conv_objs="$reload_objs $func_extract_archives_result" + fi + fi + + # If we're not building shared, we need to use non_pic_objs + test "$build_libtool_libs" != yes && libobjs="$non_pic_objects" + + # Create the old-style object. + reload_objs="$objs$old_deplibs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; /\.lib$/d; $lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test + + output="$obj" + func_execute_cmds "$reload_cmds" 'exit $?' + + # Exit if we aren't doing a library object file. + if test -z "$libobj"; then + if test -n "$gentop"; then + func_show_eval '${RM}r "$gentop"' + fi + + exit $EXIT_SUCCESS + fi + + if test "$build_libtool_libs" != yes; then + if test -n "$gentop"; then + func_show_eval '${RM}r "$gentop"' + fi + + # Create an invalid libtool object if no PIC, so that we don't + # accidentally link it into a program. + # $show "echo timestamp > $libobj" + # $opt_dry_run || eval "echo timestamp > $libobj" || exit $? + exit $EXIT_SUCCESS + fi + + if test -n "$pic_flag" || test "$pic_mode" != default; then + # Only do commands if we really have different PIC objects. + reload_objs="$libobjs $reload_conv_objs" + output="$libobj" + func_execute_cmds "$reload_cmds" 'exit $?' + fi + + if test -n "$gentop"; then + func_show_eval '${RM}r "$gentop"' + fi + + exit $EXIT_SUCCESS + ;; + + prog) + case $host in + *cygwin*) func_stripname '' '.exe' "$output" + output=$func_stripname_result.exe;; + esac + test -n "$vinfo" && \ + func_warning "\`-version-info' is ignored for programs" + + test -n "$release" && \ + func_warning "\`-release' is ignored for programs" + + test "$preload" = yes \ + && test "$dlopen_support" = unknown \ + && test "$dlopen_self" = unknown \ + && test "$dlopen_self_static" = unknown && \ + func_warning "\`LT_INIT([dlopen])' not used. Assuming no dlopen support." + + case $host in + *-*-rhapsody* | *-*-darwin1.[012]) + # On Rhapsody replace the C library is the System framework + compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's/ -lc / System.ltframework /'` + finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's/ -lc / System.ltframework /'` + ;; + esac + + case $host in + *-*-darwin*) + # Don't allow lazy linking, it breaks C++ global constructors + # But is supposedly fixed on 10.4 or later (yay!). + if test "$tagname" = CXX ; then + case ${MACOSX_DEPLOYMENT_TARGET-10.0} in + 10.[0123]) + func_append compile_command " ${wl}-bind_at_load" + func_append finalize_command " ${wl}-bind_at_load" + ;; + esac + fi + # Time to change all our "foo.ltframework" stuff back to "-framework foo" + compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` + finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` + ;; + esac + + + # move library search paths that coincide with paths to not yet + # installed libraries to the beginning of the library search list + new_libs= + for path in $notinst_path; do + case " $new_libs " in + *" -L$path/$objdir "*) ;; + *) + case " $compile_deplibs " in + *" -L$path/$objdir "*) + func_append new_libs " -L$path/$objdir" ;; + esac + ;; + esac + done + for deplib in $compile_deplibs; do + case $deplib in + -L*) + case " $new_libs " in + *" $deplib "*) ;; + *) func_append new_libs " $deplib" ;; + esac + ;; + *) func_append new_libs " $deplib" ;; + esac + done + compile_deplibs="$new_libs" + + + func_append compile_command " $compile_deplibs" + func_append finalize_command " $finalize_deplibs" + + if test -n "$rpath$xrpath"; then + # If the user specified any rpath flags, then add them. + for libdir in $rpath $xrpath; do + # This is the magic to use -rpath. + case "$finalize_rpath " in + *" $libdir "*) ;; + *) func_append finalize_rpath " $libdir" ;; + esac + done + fi + + # Now hardcode the library paths + rpath= + hardcode_libdirs= + for libdir in $compile_rpath $finalize_rpath; do + if test -n "$hardcode_libdir_flag_spec"; then + if test -n "$hardcode_libdir_separator"; then + if test -z "$hardcode_libdirs"; then + hardcode_libdirs="$libdir" + else + # Just accumulate the unique libdirs. + case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in + *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) + ;; + *) + func_append hardcode_libdirs "$hardcode_libdir_separator$libdir" + ;; + esac + fi + else + eval flag=\"$hardcode_libdir_flag_spec\" + func_append rpath " $flag" + fi + elif test -n "$runpath_var"; then + case "$perm_rpath " in + *" $libdir "*) ;; + *) func_append perm_rpath " $libdir" ;; + esac + fi + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) + testbindir=`${ECHO} "$libdir" | ${SED} -e 's*/lib$*/bin*'` + case :$dllsearchpath: in + *":$libdir:"*) ;; + ::) dllsearchpath=$libdir;; + *) func_append dllsearchpath ":$libdir";; + esac + case :$dllsearchpath: in + *":$testbindir:"*) ;; + ::) dllsearchpath=$testbindir;; + *) func_append dllsearchpath ":$testbindir";; + esac + ;; + esac + done + # Substitute the hardcoded libdirs into the rpath. + if test -n "$hardcode_libdir_separator" && + test -n "$hardcode_libdirs"; then + libdir="$hardcode_libdirs" + eval rpath=\" $hardcode_libdir_flag_spec\" + fi + compile_rpath="$rpath" + + rpath= + hardcode_libdirs= + for libdir in $finalize_rpath; do + if test -n "$hardcode_libdir_flag_spec"; then + if test -n "$hardcode_libdir_separator"; then + if test -z "$hardcode_libdirs"; then + hardcode_libdirs="$libdir" + else + # Just accumulate the unique libdirs. + case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in + *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) + ;; + *) + func_append hardcode_libdirs "$hardcode_libdir_separator$libdir" + ;; + esac + fi + else + eval flag=\"$hardcode_libdir_flag_spec\" + func_append rpath " $flag" + fi + elif test -n "$runpath_var"; then + case "$finalize_perm_rpath " in + *" $libdir "*) ;; + *) func_append finalize_perm_rpath " $libdir" ;; + esac + fi + done + # Substitute the hardcoded libdirs into the rpath. + if test -n "$hardcode_libdir_separator" && + test -n "$hardcode_libdirs"; then + libdir="$hardcode_libdirs" + eval rpath=\" $hardcode_libdir_flag_spec\" + fi + finalize_rpath="$rpath" + + if test -n "$libobjs" && test "$build_old_libs" = yes; then + # Transform all the library objects into standard objects. + compile_command=`$ECHO "$compile_command" | $SP2NL | $SED "$lo2o" | $NL2SP` + finalize_command=`$ECHO "$finalize_command" | $SP2NL | $SED "$lo2o" | $NL2SP` + fi + + func_generate_dlsyms "$outputname" "@PROGRAM@" "no" + + # template prelinking step + if test -n "$prelink_cmds"; then + func_execute_cmds "$prelink_cmds" 'exit $?' + fi + + wrappers_required=yes + case $host in + *cegcc* | *mingw32ce*) + # Disable wrappers for cegcc and mingw32ce hosts, we are cross compiling anyway. + wrappers_required=no + ;; + *cygwin* | *mingw* ) + if test "$build_libtool_libs" != yes; then + wrappers_required=no + fi + ;; + *) + if test "$need_relink" = no || test "$build_libtool_libs" != yes; then + wrappers_required=no + fi + ;; + esac + if test "$wrappers_required" = no; then + # Replace the output file specification. + compile_command=`$ECHO "$compile_command" | $SED 's%@OUTPUT@%'"$output"'%g'` + link_command="$compile_command$compile_rpath" + + # We have no uninstalled library dependencies, so finalize right now. + exit_status=0 + func_show_eval "$link_command" 'exit_status=$?' + + if test -n "$postlink_cmds"; then + func_to_tool_file "$output" + postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'` + func_execute_cmds "$postlink_cmds" 'exit $?' + fi + + # Delete the generated files. + if test -f "$output_objdir/${outputname}S.${objext}"; then + func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"' + fi + + exit $exit_status + fi + + if test -n "$compile_shlibpath$finalize_shlibpath"; then + compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command" + fi + if test -n "$finalize_shlibpath"; then + finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command" + fi + + compile_var= + finalize_var= + if test -n "$runpath_var"; then + if test -n "$perm_rpath"; then + # We should set the runpath_var. + rpath= + for dir in $perm_rpath; do + func_append rpath "$dir:" + done + compile_var="$runpath_var=\"$rpath\$$runpath_var\" " + fi + if test -n "$finalize_perm_rpath"; then + # We should set the runpath_var. + rpath= + for dir in $finalize_perm_rpath; do + func_append rpath "$dir:" + done + finalize_var="$runpath_var=\"$rpath\$$runpath_var\" " + fi + fi + + if test "$no_install" = yes; then + # We don't need to create a wrapper script. + link_command="$compile_var$compile_command$compile_rpath" + # Replace the output file specification. + link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output"'%g'` + # Delete the old output file. + $opt_dry_run || $RM $output + # Link the executable and exit + func_show_eval "$link_command" 'exit $?' + + if test -n "$postlink_cmds"; then + func_to_tool_file "$output" + postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'` + func_execute_cmds "$postlink_cmds" 'exit $?' + fi + + exit $EXIT_SUCCESS + fi + + if test "$hardcode_action" = relink; then + # Fast installation is not supported + link_command="$compile_var$compile_command$compile_rpath" + relink_command="$finalize_var$finalize_command$finalize_rpath" + + func_warning "this platform does not like uninstalled shared libraries" + func_warning "\`$output' will be relinked during installation" + else + if test "$fast_install" != no; then + link_command="$finalize_var$compile_command$finalize_rpath" + if test "$fast_install" = yes; then + relink_command=`$ECHO "$compile_var$compile_command$compile_rpath" | $SED 's%@OUTPUT@%\$progdir/\$file%g'` + else + # fast_install is set to needless + relink_command= + fi + else + link_command="$compile_var$compile_command$compile_rpath" + relink_command="$finalize_var$finalize_command$finalize_rpath" + fi + fi + + # Replace the output file specification. + link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'` + + # Delete the old output files. + $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname + + func_show_eval "$link_command" 'exit $?' + + if test -n "$postlink_cmds"; then + func_to_tool_file "$output_objdir/$outputname" + postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'` + func_execute_cmds "$postlink_cmds" 'exit $?' + fi + + # Now create the wrapper script. + func_verbose "creating $output" + + # Quote the relink command for shipping. + if test -n "$relink_command"; then + # Preserve any variables that may affect compiler behavior + for var in $variables_saved_for_relink; do + if eval test -z \"\${$var+set}\"; then + relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command" + elif eval var_value=\$$var; test -z "$var_value"; then + relink_command="$var=; export $var; $relink_command" + else + func_quote_for_eval "$var_value" + relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command" + fi + done + relink_command="(cd `pwd`; $relink_command)" + relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"` + fi + + # Only actually do things if not in dry run mode. + $opt_dry_run || { + # win32 will think the script is a binary if it has + # a .exe suffix, so we strip it off here. + case $output in + *.exe) func_stripname '' '.exe' "$output" + output=$func_stripname_result ;; + esac + # test for cygwin because mv fails w/o .exe extensions + case $host in + *cygwin*) + exeext=.exe + func_stripname '' '.exe' "$outputname" + outputname=$func_stripname_result ;; + *) exeext= ;; + esac + case $host in + *cygwin* | *mingw* ) + func_dirname_and_basename "$output" "" "." + output_name=$func_basename_result + output_path=$func_dirname_result + cwrappersource="$output_path/$objdir/lt-$output_name.c" + cwrapper="$output_path/$output_name.exe" + $RM $cwrappersource $cwrapper + trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15 + + func_emit_cwrapperexe_src > $cwrappersource + + # The wrapper executable is built using the $host compiler, + # because it contains $host paths and files. If cross- + # compiling, it, like the target executable, must be + # executed on the $host or under an emulation environment. + $opt_dry_run || { + $LTCC $LTCFLAGS -o $cwrapper $cwrappersource + $STRIP $cwrapper + } + + # Now, create the wrapper script for func_source use: + func_ltwrapper_scriptname $cwrapper + $RM $func_ltwrapper_scriptname_result + trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15 + $opt_dry_run || { + # note: this script will not be executed, so do not chmod. + if test "x$build" = "x$host" ; then + $cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result + else + func_emit_wrapper no > $func_ltwrapper_scriptname_result + fi + } + ;; + * ) + $RM $output + trap "$RM $output; exit $EXIT_FAILURE" 1 2 15 + + func_emit_wrapper no > $output + chmod +x $output + ;; + esac + } + exit $EXIT_SUCCESS + ;; + esac + + # See if we need to build an old-fashioned archive. + for oldlib in $oldlibs; do + + if test "$build_libtool_libs" = convenience; then + oldobjs="$libobjs_save $symfileobj" + addlibs="$convenience" + build_libtool_libs=no + else + if test "$build_libtool_libs" = module; then + oldobjs="$libobjs_save" + build_libtool_libs=no + else + oldobjs="$old_deplibs $non_pic_objects" + if test "$preload" = yes && test -f "$symfileobj"; then + func_append oldobjs " $symfileobj" + fi + fi + addlibs="$old_convenience" + fi + + if test -n "$addlibs"; then + gentop="$output_objdir/${outputname}x" + func_append generated " $gentop" + + func_extract_archives $gentop $addlibs + func_append oldobjs " $func_extract_archives_result" + fi + + # Do each command in the archive commands. + if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then + cmds=$old_archive_from_new_cmds + else + + # Add any objects from preloaded convenience libraries + if test -n "$dlprefiles"; then + gentop="$output_objdir/${outputname}x" + func_append generated " $gentop" + + func_extract_archives $gentop $dlprefiles + func_append oldobjs " $func_extract_archives_result" + fi + + # POSIX demands no paths to be encoded in archives. We have + # to avoid creating archives with duplicate basenames if we + # might have to extract them afterwards, e.g., when creating a + # static archive out of a convenience library, or when linking + # the entirety of a libtool archive into another (currently + # not supported by libtool). + if (for obj in $oldobjs + do + func_basename "$obj" + $ECHO "$func_basename_result" + done | sort | sort -uc >/dev/null 2>&1); then + : + else + echo "copying selected object files to avoid basename conflicts..." + gentop="$output_objdir/${outputname}x" + func_append generated " $gentop" + func_mkdir_p "$gentop" + save_oldobjs=$oldobjs + oldobjs= + counter=1 + for obj in $save_oldobjs + do + func_basename "$obj" + objbase="$func_basename_result" + case " $oldobjs " in + " ") oldobjs=$obj ;; + *[\ /]"$objbase "*) + while :; do + # Make sure we don't pick an alternate name that also + # overlaps. + newobj=lt$counter-$objbase + func_arith $counter + 1 + counter=$func_arith_result + case " $oldobjs " in + *[\ /]"$newobj "*) ;; + *) if test ! -f "$gentop/$newobj"; then break; fi ;; + esac + done + func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj" + func_append oldobjs " $gentop/$newobj" + ;; + *) func_append oldobjs " $obj" ;; + esac + done + fi + eval cmds=\"$old_archive_cmds\" + + func_len " $cmds" + len=$func_len_result + if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then + cmds=$old_archive_cmds + elif test -n "$archiver_list_spec"; then + func_verbose "using command file archive linking..." + for obj in $oldobjs + do + func_to_tool_file "$obj" + $ECHO "$func_to_tool_file_result" + done > $output_objdir/$libname.libcmd + func_to_tool_file "$output_objdir/$libname.libcmd" + oldobjs=" $archiver_list_spec$func_to_tool_file_result" + cmds=$old_archive_cmds + else + # the command line is too long to link in one step, link in parts + func_verbose "using piecewise archive linking..." + save_RANLIB=$RANLIB + RANLIB=: + objlist= + concat_cmds= + save_oldobjs=$oldobjs + oldobjs= + # Is there a better way of finding the last object in the list? + for obj in $save_oldobjs + do + last_oldobj=$obj + done + eval test_cmds=\"$old_archive_cmds\" + func_len " $test_cmds" + len0=$func_len_result + len=$len0 + for obj in $save_oldobjs + do + func_len " $obj" + func_arith $len + $func_len_result + len=$func_arith_result + func_append objlist " $obj" + if test "$len" -lt "$max_cmd_len"; then + : + else + # the above command should be used before it gets too long + oldobjs=$objlist + if test "$obj" = "$last_oldobj" ; then + RANLIB=$save_RANLIB + fi + test -z "$concat_cmds" || concat_cmds=$concat_cmds~ + eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\" + objlist= + len=$len0 + fi + done + RANLIB=$save_RANLIB + oldobjs=$objlist + if test "X$oldobjs" = "X" ; then + eval cmds=\"\$concat_cmds\" + else + eval cmds=\"\$concat_cmds~\$old_archive_cmds\" + fi + fi + fi + func_execute_cmds "$cmds" 'exit $?' + done + + test -n "$generated" && \ + func_show_eval "${RM}r$generated" + + # Now create the libtool archive. + case $output in + *.la) + old_library= + test "$build_old_libs" = yes && old_library="$libname.$libext" + func_verbose "creating $output" + + # Preserve any variables that may affect compiler behavior + for var in $variables_saved_for_relink; do + if eval test -z \"\${$var+set}\"; then + relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command" + elif eval var_value=\$$var; test -z "$var_value"; then + relink_command="$var=; export $var; $relink_command" + else + func_quote_for_eval "$var_value" + relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command" + fi + done + # Quote the link command for shipping. + relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)" + relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"` + if test "$hardcode_automatic" = yes ; then + relink_command= + fi + + # Only create the output if not a dry run. + $opt_dry_run || { + for installed in no yes; do + if test "$installed" = yes; then + if test -z "$install_libdir"; then + break + fi + output="$output_objdir/$outputname"i + # Replace all uninstalled libtool libraries with the installed ones + newdependency_libs= + for deplib in $dependency_libs; do + case $deplib in + *.la) + func_basename "$deplib" + name="$func_basename_result" + eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` + test -z "$libdir" && \ + func_fatal_error "\`$deplib' is not a valid libtool archive" + func_append newdependency_libs " ${lt_sysroot:+=}$libdir/$name" + ;; + -L*) + func_stripname -L '' "$deplib" + func_replace_sysroot "$func_stripname_result" + func_append newdependency_libs " -L$func_replace_sysroot_result" + ;; + -R*) + func_stripname -R '' "$deplib" + func_replace_sysroot "$func_stripname_result" + func_append newdependency_libs " -R$func_replace_sysroot_result" + ;; + *) func_append newdependency_libs " $deplib" ;; + esac + done + dependency_libs="$newdependency_libs" + newdlfiles= + + for lib in $dlfiles; do + case $lib in + *.la) + func_basename "$lib" + name="$func_basename_result" + eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` + test -z "$libdir" && \ + func_fatal_error "\`$lib' is not a valid libtool archive" + func_append newdlfiles " ${lt_sysroot:+=}$libdir/$name" + ;; + *) func_append newdlfiles " $lib" ;; + esac + done + dlfiles="$newdlfiles" + newdlprefiles= + for lib in $dlprefiles; do + case $lib in + *.la) + # Only pass preopened files to the pseudo-archive (for + # eventual linking with the app. that links it) if we + # didn't already link the preopened objects directly into + # the library: + func_basename "$lib" + name="$func_basename_result" + eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` + test -z "$libdir" && \ + func_fatal_error "\`$lib' is not a valid libtool archive" + func_append newdlprefiles " ${lt_sysroot:+=}$libdir/$name" + ;; + esac + done + dlprefiles="$newdlprefiles" + else + newdlfiles= + for lib in $dlfiles; do + case $lib in + [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; + *) abs=`pwd`"/$lib" ;; + esac + func_append newdlfiles " $abs" + done + dlfiles="$newdlfiles" + newdlprefiles= + for lib in $dlprefiles; do + case $lib in + [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; + *) abs=`pwd`"/$lib" ;; + esac + func_append newdlprefiles " $abs" + done + dlprefiles="$newdlprefiles" + fi + $RM $output + # place dlname in correct position for cygwin + # In fact, it would be nice if we could use this code for all target + # systems that can't hard-code library paths into their executables + # and that have no shared library path variable independent of PATH, + # but it turns out we can't easily determine that from inspecting + # libtool variables, so we have to hard-code the OSs to which it + # applies here; at the moment, that means platforms that use the PE + # object format with DLL files. See the long comment at the top of + # tests/bindir.at for full details. + tdlname=$dlname + case $host,$output,$installed,$module,$dlname in + *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll) + # If a -bindir argument was supplied, place the dll there. + if test "x$bindir" != x ; + then + func_relative_path "$install_libdir" "$bindir" + tdlname=$func_relative_path_result$dlname + else + # Otherwise fall back on heuristic. + tdlname=../bin/$dlname + fi + ;; + esac + $ECHO > $output "\ +# $outputname - a libtool library file +# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION +# +# Please DO NOT delete this file! +# It is necessary for linking the library. + +# The name that we can dlopen(3). +dlname='$tdlname' + +# Names of this library. +library_names='$library_names' + +# The name of the static archive. +old_library='$old_library' + +# Linker flags that can not go in dependency_libs. +inherited_linker_flags='$new_inherited_linker_flags' + +# Libraries that this one depends upon. +dependency_libs='$dependency_libs' + +# Names of additional weak libraries provided by this library +weak_library_names='$weak_libs' + +# Version information for $libname. +current=$current +age=$age +revision=$revision + +# Is this an already installed library? +installed=$installed + +# Should we warn about portability when linking against -modules? +shouldnotlink=$module + +# Files to dlopen/dlpreopen +dlopen='$dlfiles' +dlpreopen='$dlprefiles' + +# Directory that this library needs to be installed in: +libdir='$install_libdir'" + if test "$installed" = no && test "$need_relink" = yes; then + $ECHO >> $output "\ +relink_command=\"$relink_command\"" + fi + done + } + + # Do a symbolic link so that the libtool archive can be found in + # LD_LIBRARY_PATH before the program is installed. + func_show_eval '( cd "$output_objdir" && $RM "$outputname" && $LN_S "../$outputname" "$outputname" )' 'exit $?' + ;; + esac + exit $EXIT_SUCCESS +} + +{ test "$opt_mode" = link || test "$opt_mode" = relink; } && + func_mode_link ${1+"$@"} + + +# func_mode_uninstall arg... +func_mode_uninstall () +{ + $opt_debug + RM="$nonopt" + files= + rmforce= + exit_status=0 + + # This variable tells wrapper scripts just to set variables rather + # than running their programs. + libtool_install_magic="$magic" + + for arg + do + case $arg in + -f) func_append RM " $arg"; rmforce=yes ;; + -*) func_append RM " $arg" ;; + *) func_append files " $arg" ;; + esac + done + + test -z "$RM" && \ + func_fatal_help "you must specify an RM program" + + rmdirs= + + for file in $files; do + func_dirname "$file" "" "." + dir="$func_dirname_result" + if test "X$dir" = X.; then + odir="$objdir" + else + odir="$dir/$objdir" + fi + func_basename "$file" + name="$func_basename_result" + test "$opt_mode" = uninstall && odir="$dir" + + # Remember odir for removal later, being careful to avoid duplicates + if test "$opt_mode" = clean; then + case " $rmdirs " in + *" $odir "*) ;; + *) func_append rmdirs " $odir" ;; + esac + fi + + # Don't error if the file doesn't exist and rm -f was used. + if { test -L "$file"; } >/dev/null 2>&1 || + { test -h "$file"; } >/dev/null 2>&1 || + test -f "$file"; then + : + elif test -d "$file"; then + exit_status=1 + continue + elif test "$rmforce" = yes; then + continue + fi + + rmfiles="$file" + + case $name in + *.la) + # Possibly a libtool archive, so verify it. + if func_lalib_p "$file"; then + func_source $dir/$name + + # Delete the libtool libraries and symlinks. + for n in $library_names; do + func_append rmfiles " $odir/$n" + done + test -n "$old_library" && func_append rmfiles " $odir/$old_library" + + case "$opt_mode" in + clean) + case " $library_names " in + *" $dlname "*) ;; + *) test -n "$dlname" && func_append rmfiles " $odir/$dlname" ;; + esac + test -n "$libdir" && func_append rmfiles " $odir/$name $odir/${name}i" + ;; + uninstall) + if test -n "$library_names"; then + # Do each command in the postuninstall commands. + func_execute_cmds "$postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1' + fi + + if test -n "$old_library"; then + # Do each command in the old_postuninstall commands. + func_execute_cmds "$old_postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1' + fi + # FIXME: should reinstall the best remaining shared library. + ;; + esac + fi + ;; + + *.lo) + # Possibly a libtool object, so verify it. + if func_lalib_p "$file"; then + + # Read the .lo file + func_source $dir/$name + + # Add PIC object to the list of files to remove. + if test -n "$pic_object" && + test "$pic_object" != none; then + func_append rmfiles " $dir/$pic_object" + fi + + # Add non-PIC object to the list of files to remove. + if test -n "$non_pic_object" && + test "$non_pic_object" != none; then + func_append rmfiles " $dir/$non_pic_object" + fi + fi + ;; + + *) + if test "$opt_mode" = clean ; then + noexename=$name + case $file in + *.exe) + func_stripname '' '.exe' "$file" + file=$func_stripname_result + func_stripname '' '.exe' "$name" + noexename=$func_stripname_result + # $file with .exe has already been added to rmfiles, + # add $file without .exe + func_append rmfiles " $file" + ;; + esac + # Do a test to see if this is a libtool program. + if func_ltwrapper_p "$file"; then + if func_ltwrapper_executable_p "$file"; then + func_ltwrapper_scriptname "$file" + relink_command= + func_source $func_ltwrapper_scriptname_result + func_append rmfiles " $func_ltwrapper_scriptname_result" + else + relink_command= + func_source $dir/$noexename + fi + + # note $name still contains .exe if it was in $file originally + # as does the version of $file that was added into $rmfiles + func_append rmfiles " $odir/$name $odir/${name}S.${objext}" + if test "$fast_install" = yes && test -n "$relink_command"; then + func_append rmfiles " $odir/lt-$name" + fi + if test "X$noexename" != "X$name" ; then + func_append rmfiles " $odir/lt-${noexename}.c" + fi + fi + fi + ;; + esac + func_show_eval "$RM $rmfiles" 'exit_status=1' + done + + # Try to remove the ${objdir}s in the directories where we deleted files + for dir in $rmdirs; do + if test -d "$dir"; then + func_show_eval "rmdir $dir >/dev/null 2>&1" + fi + done + + exit $exit_status +} + +{ test "$opt_mode" = uninstall || test "$opt_mode" = clean; } && + func_mode_uninstall ${1+"$@"} + +test -z "$opt_mode" && { + help="$generic_help" + func_fatal_help "you must specify a MODE" +} + +test -z "$exec_cmd" && \ + func_fatal_help "invalid operation mode \`$opt_mode'" + +if test -n "$exec_cmd"; then + eval exec "$exec_cmd" + exit $EXIT_FAILURE +fi + +exit $exit_status + + +# The TAGs below are defined such that we never get into a situation +# in which we disable both kinds of libraries. Given conflicting +# choices, we go for a static library, that is the most portable, +# since we can't tell whether shared libraries were disabled because +# the user asked for that or because the platform doesn't support +# them. This is particularly important on AIX, because we don't +# support having both static and shared libraries enabled at the same +# time on that platform, so we default to a shared-only configuration. +# If a disable-shared tag is given, we'll fallback to a static-only +# configuration. But we'll never go from static-only to shared-only. + +# ### BEGIN LIBTOOL TAG CONFIG: disable-shared +build_libtool_libs=no +build_old_libs=yes +# ### END LIBTOOL TAG CONFIG: disable-shared + +# ### BEGIN LIBTOOL TAG CONFIG: disable-static +build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac` +# ### END LIBTOOL TAG CONFIG: disable-static + +# Local Variables: +# mode:shell-script +# sh-indentation:2 +# End: +# vi:sw=2 + diff --git a/software/scsi2sd-util/libzipper-1.0.3/missing b/software/scsi2sd-util/libzipper-1.0.3/missing new file mode 100755 index 0000000..28055d2 --- /dev/null +++ b/software/scsi2sd-util/libzipper-1.0.3/missing @@ -0,0 +1,376 @@ +#! /bin/sh +# Common stub for a few missing GNU programs while installing. + +scriptversion=2009-04-28.21; # UTC + +# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006, +# 2008, 2009 Free Software Foundation, Inc. +# Originally by Fran,cois Pinard , 1996. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +if test $# -eq 0; then + echo 1>&2 "Try \`$0 --help' for more information" + exit 1 +fi + +run=: +sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p' +sed_minuso='s/.* -o \([^ ]*\).*/\1/p' + +# In the cases where this matters, `missing' is being run in the +# srcdir already. +if test -f configure.ac; then + configure_ac=configure.ac +else + configure_ac=configure.in +fi + +msg="missing on your system" + +case $1 in +--run) + # Try to run requested program, and just exit if it succeeds. + run= + shift + "$@" && exit 0 + # Exit code 63 means version mismatch. This often happens + # when the user try to use an ancient version of a tool on + # a file that requires a minimum version. In this case we + # we should proceed has if the program had been absent, or + # if --run hadn't been passed. + if test $? = 63; then + run=: + msg="probably too old" + fi + ;; + + -h|--h|--he|--hel|--help) + echo "\ +$0 [OPTION]... PROGRAM [ARGUMENT]... + +Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an +error status if there is no known handling for PROGRAM. + +Options: + -h, --help display this help and exit + -v, --version output version information and exit + --run try to run the given command, and emulate it if it fails + +Supported PROGRAM values: + aclocal touch file \`aclocal.m4' + autoconf touch file \`configure' + autoheader touch file \`config.h.in' + autom4te touch the output file, or create a stub one + automake touch all \`Makefile.in' files + bison create \`y.tab.[ch]', if possible, from existing .[ch] + flex create \`lex.yy.c', if possible, from existing .c + help2man touch the output file + lex create \`lex.yy.c', if possible, from existing .c + makeinfo touch the output file + tar try tar, gnutar, gtar, then tar without non-portable flags + yacc create \`y.tab.[ch]', if possible, from existing .[ch] + +Version suffixes to PROGRAM as well as the prefixes \`gnu-', \`gnu', and +\`g' are ignored when checking the name. + +Send bug reports to ." + exit $? + ;; + + -v|--v|--ve|--ver|--vers|--versi|--versio|--version) + echo "missing $scriptversion (GNU Automake)" + exit $? + ;; + + -*) + echo 1>&2 "$0: Unknown \`$1' option" + echo 1>&2 "Try \`$0 --help' for more information" + exit 1 + ;; + +esac + +# normalize program name to check for. +program=`echo "$1" | sed ' + s/^gnu-//; t + s/^gnu//; t + s/^g//; t'` + +# Now exit if we have it, but it failed. Also exit now if we +# don't have it and --version was passed (most likely to detect +# the program). This is about non-GNU programs, so use $1 not +# $program. +case $1 in + lex*|yacc*) + # Not GNU programs, they don't have --version. + ;; + + tar*) + if test -n "$run"; then + echo 1>&2 "ERROR: \`tar' requires --run" + exit 1 + elif test "x$2" = "x--version" || test "x$2" = "x--help"; then + exit 1 + fi + ;; + + *) + if test -z "$run" && ($1 --version) > /dev/null 2>&1; then + # We have it, but it failed. + exit 1 + elif test "x$2" = "x--version" || test "x$2" = "x--help"; then + # Could not run --version or --help. This is probably someone + # running `$TOOL --version' or `$TOOL --help' to check whether + # $TOOL exists and not knowing $TOOL uses missing. + exit 1 + fi + ;; +esac + +# If it does not exist, or fails to run (possibly an outdated version), +# try to emulate it. +case $program in + aclocal*) + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified \`acinclude.m4' or \`${configure_ac}'. You might want + to install the \`Automake' and \`Perl' packages. Grab them from + any GNU archive site." + touch aclocal.m4 + ;; + + autoconf*) + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified \`${configure_ac}'. You might want to install the + \`Autoconf' and \`GNU m4' packages. Grab them from any GNU + archive site." + touch configure + ;; + + autoheader*) + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified \`acconfig.h' or \`${configure_ac}'. You might want + to install the \`Autoconf' and \`GNU m4' packages. Grab them + from any GNU archive site." + files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}` + test -z "$files" && files="config.h" + touch_files= + for f in $files; do + case $f in + *:*) touch_files="$touch_files "`echo "$f" | + sed -e 's/^[^:]*://' -e 's/:.*//'`;; + *) touch_files="$touch_files $f.in";; + esac + done + touch $touch_files + ;; + + automake*) + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'. + You might want to install the \`Automake' and \`Perl' packages. + Grab them from any GNU archive site." + find . -type f -name Makefile.am -print | + sed 's/\.am$/.in/' | + while read f; do touch "$f"; done + ;; + + autom4te*) + echo 1>&2 "\ +WARNING: \`$1' is needed, but is $msg. + You might have modified some files without having the + proper tools for further handling them. + You can get \`$1' as part of \`Autoconf' from any GNU + archive site." + + file=`echo "$*" | sed -n "$sed_output"` + test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` + if test -f "$file"; then + touch $file + else + test -z "$file" || exec >$file + echo "#! /bin/sh" + echo "# Created by GNU Automake missing as a replacement of" + echo "# $ $@" + echo "exit 0" + chmod +x $file + exit 1 + fi + ;; + + bison*|yacc*) + echo 1>&2 "\ +WARNING: \`$1' $msg. You should only need it if + you modified a \`.y' file. You may need the \`Bison' package + in order for those modifications to take effect. You can get + \`Bison' from any GNU archive site." + rm -f y.tab.c y.tab.h + if test $# -ne 1; then + eval LASTARG="\${$#}" + case $LASTARG in + *.y) + SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'` + if test -f "$SRCFILE"; then + cp "$SRCFILE" y.tab.c + fi + SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'` + if test -f "$SRCFILE"; then + cp "$SRCFILE" y.tab.h + fi + ;; + esac + fi + if test ! -f y.tab.h; then + echo >y.tab.h + fi + if test ! -f y.tab.c; then + echo 'main() { return 0; }' >y.tab.c + fi + ;; + + lex*|flex*) + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified a \`.l' file. You may need the \`Flex' package + in order for those modifications to take effect. You can get + \`Flex' from any GNU archive site." + rm -f lex.yy.c + if test $# -ne 1; then + eval LASTARG="\${$#}" + case $LASTARG in + *.l) + SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'` + if test -f "$SRCFILE"; then + cp "$SRCFILE" lex.yy.c + fi + ;; + esac + fi + if test ! -f lex.yy.c; then + echo 'main() { return 0; }' >lex.yy.c + fi + ;; + + help2man*) + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified a dependency of a manual page. You may need the + \`Help2man' package in order for those modifications to take + effect. You can get \`Help2man' from any GNU archive site." + + file=`echo "$*" | sed -n "$sed_output"` + test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` + if test -f "$file"; then + touch $file + else + test -z "$file" || exec >$file + echo ".ab help2man is required to generate this page" + exit $? + fi + ;; + + makeinfo*) + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified a \`.texi' or \`.texinfo' file, or any other file + indirectly affecting the aspect of the manual. The spurious + call might also be the consequence of using a buggy \`make' (AIX, + DU, IRIX). You might want to install the \`Texinfo' package or + the \`GNU make' package. Grab either from any GNU archive site." + # The file to touch is that specified with -o ... + file=`echo "$*" | sed -n "$sed_output"` + test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` + if test -z "$file"; then + # ... or it is the one specified with @setfilename ... + infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'` + file=`sed -n ' + /^@setfilename/{ + s/.* \([^ ]*\) *$/\1/ + p + q + }' $infile` + # ... or it is derived from the source name (dir/f.texi becomes f.info) + test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info + fi + # If the file does not exist, the user really needs makeinfo; + # let's fail without touching anything. + test -f $file || exit 1 + touch $file + ;; + + tar*) + shift + + # We have already tried tar in the generic part. + # Look for gnutar/gtar before invocation to avoid ugly error + # messages. + if (gnutar --version > /dev/null 2>&1); then + gnutar "$@" && exit 0 + fi + if (gtar --version > /dev/null 2>&1); then + gtar "$@" && exit 0 + fi + firstarg="$1" + if shift; then + case $firstarg in + *o*) + firstarg=`echo "$firstarg" | sed s/o//` + tar "$firstarg" "$@" && exit 0 + ;; + esac + case $firstarg in + *h*) + firstarg=`echo "$firstarg" | sed s/h//` + tar "$firstarg" "$@" && exit 0 + ;; + esac + fi + + echo 1>&2 "\ +WARNING: I can't seem to be able to run \`tar' with the given arguments. + You may want to install GNU tar or Free paxutils, or check the + command line arguments." + exit 1 + ;; + + *) + echo 1>&2 "\ +WARNING: \`$1' is needed, and is $msg. + You might have modified some files without having the + proper tools for further handling them. Check the \`README' file, + it often tells you about the needed prerequisites for installing + this package. You may also peek at any GNU archive site, in case + some other package would contain this missing \`$1' program." + exit 1 + ;; +esac + +exit 0 + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-time-zone: "UTC" +# time-stamp-end: "; # UTC" +# End: diff --git a/software/scsi2sd-util/libzipper-1.0.3/port/strerror_gnu.cc b/software/scsi2sd-util/libzipper-1.0.3/port/strerror_gnu.cc new file mode 100644 index 0000000..d41eddb --- /dev/null +++ b/software/scsi2sd-util/libzipper-1.0.3/port/strerror_gnu.cc @@ -0,0 +1,38 @@ +// Copyright (C) 2011 Michael McMaster +// +// This file is part of libzipper. +// +// libzipper is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// libzipper is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with libzipper. If not, see . + +#define _GNU_SOURCE + +#include "../strerror.hh" + +#include + +using namespace zipper; + +std::string +zipper::strerror(int errnum) +{ + char buf[1024]; + const char* message(NULL); + + // The GNU-specific strerror_r may use the provided buffer, OR a static + // buffer. + message = strerror_r(errnum, buf, sizeof(buf)); + + return std::string(message); +} + diff --git a/software/scsi2sd-util/libzipper-1.0.3/port/strerror_posix.cc b/software/scsi2sd-util/libzipper-1.0.3/port/strerror_posix.cc new file mode 100644 index 0000000..83f4f8f --- /dev/null +++ b/software/scsi2sd-util/libzipper-1.0.3/port/strerror_posix.cc @@ -0,0 +1,43 @@ +// Copyright (C) 2011 Michael McMaster +// +// This file is part of libzipper. +// +// libzipper is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// libzipper is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with libzipper. If not, see . + +#include "../strerror.hh" + +#include + +using namespace zipper; + +std::string +zipper::strerror(int errnum) +{ + char buf[1024]; + const char* message(NULL); + +#if (_POSIX_C_SOURCE >= 200112L || _XOPEN_SOURCE >= 600) + int error(strerror_r(errnum, buf, sizeof(buf))); + if (error != 0) + { + message = "Unknown error"; + } +#else + // Thread-unsafe fallback + message = ::strerror(errnum); +#endif + + return std::string(message); +} + diff --git a/software/scsi2sd-util/libzipper-1.0.3/split.hh b/software/scsi2sd-util/libzipper-1.0.3/split.hh new file mode 100644 index 0000000..be2f421 --- /dev/null +++ b/software/scsi2sd-util/libzipper-1.0.3/split.hh @@ -0,0 +1,58 @@ +// Copyright (C) 2011 Michael McMaster +// +// This file is part of libzipper. +// +// libzipper is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// libzipper is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with libzipper. If not, see . + +#ifndef zipper_split_hh +#define zipper_split_hh + +#include + +namespace zipper +{ + + template + void + split(const std::string& in, char delim, OutputIterator out) + { + std::string::size_type start(0); + std::string::size_type pos(0); + while (pos < in.size()) + { + if (in[pos] == delim) + { + if (pos != start) + { + *out = in.substr(start, pos - start); + ++out; + } + ++pos; + start = pos; + } + else + { + ++pos; + } + } + + if (pos != start) + { + *out = in.substr(start, pos - start); + ++out; + } + } +} + +#endif diff --git a/software/scsi2sd-util/libzipper-1.0.3/strerror.hh b/software/scsi2sd-util/libzipper-1.0.3/strerror.hh new file mode 100644 index 0000000..018a07c --- /dev/null +++ b/software/scsi2sd-util/libzipper-1.0.3/strerror.hh @@ -0,0 +1,29 @@ +// Copyright (C) 2011 Michael McMaster +// +// This file is part of libzipper. +// +// libzipper is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// libzipper is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with libzipper. If not, see . + +#ifndef zipper_strerror_hh +#define zipper_strerror_hh + +#include + +namespace zipper +{ + + std::string strerror(int errnum); +} + +#endif diff --git a/software/scsi2sd-util/libzipper-1.0.3/util.hh b/software/scsi2sd-util/libzipper-1.0.3/util.hh new file mode 100644 index 0000000..103b389 --- /dev/null +++ b/software/scsi2sd-util/libzipper-1.0.3/util.hh @@ -0,0 +1,98 @@ +// Copyright (C) 2011 Michael McMaster +// +// This file is part of libzipper. +// +// libzipper is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// libzipper is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with libzipper. If not, see . + +#ifndef zipper_util_hh +#define zipper_util_hh + +namespace zipper +{ + template + struct + dummy_delete + { + void operator()(T*) {} + }; + + template + uint32_t + read32_le(const T& inArray, size_t pos = 0) + { + // Read 4 bytes in little-endian order. + // Return results in host-endian. + return uint32_t( + inArray[pos] | + (uint32_t(inArray[pos+1]) << 8) | + (uint32_t(inArray[pos+2]) << 16) | + (uint32_t(inArray[pos+3]) << 24) + ); + } + + template + uint16_t + read16_le(const T& inArray, size_t pos = 0) + { + // Read 2 bytes in little-endian order. + // Return results in host-endian. + return uint16_t( + inArray[pos] | + (uint16_t(inArray[pos+1]) << 8) + ); + } + + template + void + write32_le(uint32_t value, T& outArray, size_t pos = 0) + { + // Write 4 bytes in little-endian order. + outArray[pos] = value & 0xff; + outArray[pos + 1] = (value >> 8) & 0xff; + outArray[pos + 2] = (value >> 16) & 0xff; + outArray[pos + 3] = (value >> 24) & 0xff; + } + + template + void + write32_le(uint32_t value, T* outArray, size_t pos = 0) + { + // Write 4 bytes in little-endian order. + outArray[pos] = value & 0xff; + outArray[pos + 1] = (value >> 8) & 0xff; + outArray[pos + 2] = (value >> 16) & 0xff; + outArray[pos + 3] = (value >> 24) & 0xff; + } + + template + void + write16_le(uint16_t value, T& outArray, size_t pos = 0) + { + // Write 4 bytes in little-endian order. + outArray[pos] = value & 0xff; + outArray[pos + 1] = (value >> 8); + } + + template + void + write16_le(uint16_t value, T* outArray, size_t pos = 0) + { + // Write 4 bytes in little-endian order. + outArray[pos] = value & 0xff; + outArray[pos + 1] = (value >> 8); + } +} + +#endif + diff --git a/software/scsi2sd-util/libzipper-1.0.3/zip.cc b/software/scsi2sd-util/libzipper-1.0.3/zip.cc new file mode 100644 index 0000000..1655072 --- /dev/null +++ b/software/scsi2sd-util/libzipper-1.0.3/zip.cc @@ -0,0 +1,572 @@ +// Copyright (C) 2011 Michael McMaster +// +// This file is part of libzipper. +// +// libzipper is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// libzipper is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with libzipper. If not, see . + +#include "zipper.hh" +#include "zip.hh" +#include "util.hh" +#include "deflate.hh" + + +#include +#include +#include + +#include +#include + +using namespace zipper; + +namespace +{ + time_t convertDosDateTime(uint16_t date, uint16_t time) + { + struct tm parts; + memset(&parts, 0, sizeof(parts)); + parts.tm_sec = time & 0x1F; + parts.tm_min = (time & 0x7E0) >> 5; + parts.tm_hour = (time >> 11); + parts.tm_mday = date & 0x1F; + parts.tm_mon = ((date & 0x1E0) >> 5) - 1; + parts.tm_year = (date >> 9) + 80; + return mktime(&parts); + } + + void convertDosDateTime(time_t in, uint16_t& date, uint16_t& time) + { + struct tm buf; + struct tm* parts(localtime_r(&in, &buf)); + + time = + parts->tm_sec + + (parts->tm_min << 5) + + (parts->tm_hour << 11); + + date = + parts->tm_mday + + ((parts->tm_mon + 1) << 5) + + ((parts->tm_year - 80) << 9); + } + + class FileEntry : public CompressedFile + { + public: + FileEntry( + const ReaderPtr& reader, + uint16_t versionNeeded, + uint16_t gpFlag, + uint16_t compressionMethod, + uint32_t crc, + zsize_t compressedSize, + zsize_t uncompressedSize, + time_t modTime, + zsize_t localHeaderOffset, + std::string fileName + ) : + m_reader(reader), + m_versionNeeded(versionNeeded), + m_gpFlag(gpFlag), + m_compressionMethod(compressionMethod), + m_crc(crc), + m_compressedSize(compressedSize), + m_uncompressedSize(uncompressedSize), + m_localHeaderOffset(localHeaderOffset), + m_fileName(fileName) + { + m_modTime.tv_sec = modTime; + m_modTime.tv_usec = 0; + } + + virtual bool isDecompressSupported() const + { + return ((m_versionNeeded & 0xf) <= 20) && + ((m_gpFlag & 0x1) == 0) && // Not encrypted + ((m_compressionMethod == 0) || (m_compressionMethod == 8)); + } + + virtual const std::string& getPath() const + { + return m_fileName; + } + + virtual zsize_t getCompressedSize() const { return m_compressedSize; } + virtual zsize_t getUncompressedSize() const + { + return m_uncompressedSize; + } + + virtual const timeval& getModificationTime() const { return m_modTime; } + + virtual void decompress(Writer& writer) + { + enum + { + Signature = 0x04034b50, + MinRecordBytes = 30, + ChunkSize = 64*1024 + }; + + std::vector localRecord(MinRecordBytes); + m_reader->readData( + m_localHeaderOffset, MinRecordBytes, &localRecord[0] + ); + if (read32_le(localRecord, 0) != Signature) + { + throw FormatException("Invalid local ZIP record"); + } + + // Don't trust the lengths for filename and extra content read from + // the central records. At least for extra, these DO differ for + // unknown reasons + zsize_t filenameLength(read16_le(localRecord, 26)); + zsize_t extraLength(read16_le(localRecord, 28)); + + zsize_t startCompressedBytes( + m_localHeaderOffset + + MinRecordBytes + + filenameLength + + extraLength + ); + + zsize_t endCompressedBytes( + startCompressedBytes + m_compressedSize + ); + + if (endCompressedBytes > m_reader->getSize()) + { + throw FormatException("Compressed file size is too long"); + } + + switch (m_compressionMethod) + { + case 0: // No compression + { + for (zsize_t pos(startCompressedBytes); + pos < endCompressedBytes; + pos += ChunkSize + ) + { + uint8_t buf[ChunkSize]; + zsize_t bytes( + std::min(zsize_t(ChunkSize), endCompressedBytes - pos) + ); + m_reader->readData(pos, bytes, &buf[0]); + writer.writeData(pos, bytes, &buf[0]); + } + }; break; + + case 8: // Deflate + { + uint32_t crc(0); + zsize_t inPos(startCompressedBytes); + zsize_t outPos(0); + inflate( + m_reader, + writer, + inPos, + endCompressedBytes, + outPos, + crc); + + if (m_gpFlag & 0x4) // CRC is after compressed data + { + uint8_t dataDescriptor[12]; + m_reader->readData( + inPos, sizeof(dataDescriptor), &dataDescriptor[0]); + m_crc = read32_le(dataDescriptor, 0); + m_compressedSize = read32_le(dataDescriptor, 4); + m_uncompressedSize = read32_le(dataDescriptor, 8); + } + + if (crc != m_crc) + { + throw FormatException("Corrupt Data (CRC failure)"); + } + + }; break; + default: + throw UnsupportedException("Unsupported compression scheme"); + }; + } + + private: + ReaderPtr m_reader; + uint16_t m_versionNeeded; + uint16_t m_gpFlag; + uint16_t m_compressionMethod; + uint32_t m_crc; + zsize_t m_compressedSize; + zsize_t m_uncompressedSize; + timeval m_modTime; + zsize_t m_localHeaderOffset; + std::string m_fileName; + }; + + bool readEndCentralDirectory( + const ReaderPtr& reader, + zsize_t& centralDirectoryBytes, + zsize_t& centralDirectoryOffset, + zsize_t& centralDirectoryEntries + ) + { + // Read the end of central directory record. This + // record enables us to find the remainding + // records without searching for record signatures. + + // TODO does not consider the Zip64 entries. + + enum + { + MinRecordBytes = 22, // Minimum size with no comment + MaxCommentBytes = 65535, // 2 bytes to store comment length + Signature = 0x06054b50 + }; + + zsize_t providerSize(reader->getSize()); + if (providerSize < MinRecordBytes) + { + throw FormatException("Too small"); + } + + size_t bufSize( + std::min(zsize_t(MinRecordBytes + MaxCommentBytes), providerSize) + ); + std::vector buffer(bufSize); + reader->readData(providerSize - bufSize, bufSize, &buffer[0]); + + // Need to search for this record, as it ends in a variable-length + // comment field. Search backwards, with the assumption that the + // comment doesn't exist, or is much smaller than the maximum + // length + + bool recordFound(false); + ssize_t pos(bufSize - MinRecordBytes); + for (; pos >= 0; --pos) + { + recordFound = (read32_le(buffer, pos) == Signature); + break; + } + + if (recordFound) + { + if (read16_le(buffer, pos + 4) != 0) + { + throw UnsupportedException("Spanned disks not supported"); + } + + centralDirectoryBytes = read32_le(buffer, pos + 12); + centralDirectoryOffset = read32_le(buffer, pos + 16); + centralDirectoryEntries = read16_le(buffer, pos + 10); + } + return recordFound; + } + + std::vector + readCentralDirectory(const ReaderPtr& reader) + { + enum Constants + { + MinRecordBytes = 46, + Signature = 0x02014b50 + }; + + zsize_t centralDirectoryBytes(0); + zsize_t centralDirectoryOffset(0); + zsize_t centralDirectoryEntries(0); + bool isZip( + readEndCentralDirectory( + reader, + centralDirectoryBytes, + centralDirectoryOffset, + centralDirectoryEntries + ) + ); + (void) isZip; // Avoid unused warning. + assert(isZip); + + std::vector buffer(centralDirectoryBytes); + reader->readData( + centralDirectoryOffset, + centralDirectoryBytes, + &buffer[0] + ); + + zsize_t pos(0); + std::vector entries; + while ((pos + MinRecordBytes) < buffer.size()) + { + if (read32_le(buffer, pos) != Signature) + { + // Unknown record type. + pos += 1; + continue; + } + + uint16_t versionNeeded(read16_le(buffer, pos + 6)); + uint16_t gpFlag(read16_le(buffer, pos + 8)); + uint16_t compressionMethod(read16_le(buffer, pos + 10)); + uint16_t modTime(read16_le(buffer, pos + 12)); + uint16_t modDate(read16_le(buffer, pos + 14)); + uint32_t crc(read32_le(buffer, pos + 16)); + uint32_t compressedSize(read32_le(buffer, pos + 20)); + uint32_t uncompressedSize(read32_le(buffer, pos + 24)); + size_t fileNameLen(read16_le(buffer, pos + 28)); + size_t extraLen(read16_le(buffer, pos + 30)); + size_t commentLen(read16_le(buffer, pos + 32)); + uint32_t localHeaderOffset(read32_le(buffer, pos + 42)); + + if ((fileNameLen + extraLen + commentLen + MinRecordBytes + pos) > + buffer.size() + ) + { + throw FormatException("File comments are too long"); + } + + std::string fileName( + &buffer[pos + MinRecordBytes], + &buffer[pos + MinRecordBytes + fileNameLen] + ); + + entries.push_back( + CompressedFilePtr( + new FileEntry( + reader, + versionNeeded, + gpFlag, + compressionMethod, + crc, + compressedSize, + uncompressedSize, + convertDosDateTime(modDate, modTime), + localHeaderOffset, + fileName + ) + ) + ); + + pos += MinRecordBytes + fileNameLen + extraLen + commentLen; + } + return entries; + } + +} + + +void +zipper::zip( + const std::string& filename, + const Reader& reader, + const WriterPtr& writer, + ZipFileRecord& outRecord) +{ + enum Constants + { + ChunkSize = 64*1024, + WindowBits = 15, + TimePos = 10 + }; + + static uint8_t Header[] = + { + 0x50, 0x4b, 0x03, 0x04, // Header + 20, // Version (2.0) + 0, // File attributes + 0,0, // gp flag. + 8,0, // deflate method + 0,0, // file time + 0,0, // file date + 0,0,0,0, // CRC32 + 0,0,0,0, // Compressed size + 0,0,0,0 // Uncompressed size + }; + + zsize_t outPos(writer->getSize()); + outRecord.localHeaderOffset = outPos; + outRecord.filename = filename; + + // Write header + { + uint8_t buffer[ChunkSize]; + memcpy(buffer, Header, sizeof(Header)); + zsize_t pos(sizeof(Header)); + + std::string::size_type filenameSize(filename.size()); + if (filenameSize > (ChunkSize - pos)) + { + filenameSize = ChunkSize - pos; + } + buffer[pos++] = filenameSize & 0xff; + buffer[pos++] = (filenameSize >> 8); + buffer[pos++] = 0; // extra field len + buffer[pos++] = 0; // extra field len + memcpy(buffer + pos, filename.data(), filenameSize); + pos += filenameSize; + writer->writeData(outPos, pos, &buffer[0]); + outPos += pos; + } + + // Write compressed data + deflate( + reader, + writer, + outPos, + outRecord.uncompressedSize, + outRecord.compressedSize, + outRecord.crc32); + + // Go back and complete the header. + convertDosDateTime( + reader.getModTime().tv_sec, outRecord.dosDate, outRecord.dosTime); + uint8_t trailer[16]; + write16_le(outRecord.dosTime, &trailer[0]); + write16_le(outRecord.dosDate, &trailer[2]); + write32_le(outRecord.crc32, &trailer[4]); + write32_le(outRecord.compressedSize, &trailer[8]); + write32_le(outRecord.uncompressedSize, &trailer[12]); + writer->writeData( + outRecord.localHeaderOffset + TimePos, sizeof(trailer), &trailer[0]); +} + +void +zipper::zipFinalise( + const std::vector& records, + const WriterPtr& writer) +{ + enum Constants + { + ChunkSize = 64*1024 + }; + + static uint8_t FileHeader[] = + { + 0x50, 0x4b, 0x01, 0x02, // Header + 20, 0x00, // Version (2.0) + 20, 0x00, // Version Needed to extract (2.0) + 0,0, // gp flag. + 8,0 // deflate method + }; + + zsize_t outPos(writer->getSize()); + uint32_t centralDirOffset(outPos); + + for (size_t i = 0; i < records.size(); ++i) + { + uint8_t buffer[ChunkSize]; + memcpy(buffer, FileHeader, sizeof(FileHeader)); + zsize_t pos(sizeof(FileHeader)); + + write16_le(records[i].dosTime, &buffer[pos]); + pos += 2; + write16_le(records[i].dosDate, &buffer[pos]); + pos += 2; + + write32_le(records[i].crc32, &buffer[pos]); + pos += 4; + + write32_le(records[i].compressedSize, &buffer[pos]); + pos += 4; + + write32_le(records[i].uncompressedSize, &buffer[pos]); + pos += 4; + + std::string::size_type filenameSize(records[i].filename.size()); + if (filenameSize > (ChunkSize - pos)) + { + filenameSize = ChunkSize - pos; + } + write16_le(filenameSize, &buffer[pos]); + pos += 2; + + write16_le(0, &buffer[pos]); // extra field len + pos += 2; + + write16_le(0, &buffer[pos]); // file comment len + pos += 2; + + write16_le(0, &buffer[pos]); // disk number + pos += 2; + + write16_le(0, &buffer[pos]); // internal file attributes + pos += 2; + + write32_le(0, &buffer[pos]); // external file attributes + pos += 4; + + write32_le(records[i].localHeaderOffset, &buffer[pos]); + pos += 4; + + memcpy(buffer + pos, records[i].filename.data(), filenameSize); + pos += filenameSize; + + writer->writeData(outPos, pos, &buffer[0]); + outPos += pos; + } + + uint32_t centralDirSize(writer->getSize() - centralDirOffset); + + { + // End-of-directory record. + static uint8_t EndDirectory[] = + { + 0x50, 0x4b, 0x05, 0x06, // Header + 0x00, 0x00, // Disk num + 0x00, 0x00 // Disk with central dir + }; + uint8_t buffer[ChunkSize]; + memcpy(buffer, EndDirectory, sizeof(EndDirectory)); + zsize_t pos(sizeof(EndDirectory)); + + write16_le(records.size(), &buffer[pos]); // Entries on this disk + pos += 2; + write16_le(records.size(), &buffer[pos]); // Total entries + pos += 2; + + write32_le(centralDirSize, &buffer[pos]); + pos += 4; + write32_le(centralDirOffset, &buffer[pos]); + pos += 4; + + write16_le(0, &buffer[pos]); // Zip comment length + pos += 2; + + writer->writeData(outPos, pos, &buffer[0]); + outPos += pos; + } +} + +std::vector +zipper::unzip(const ReaderPtr& reader) +{ + return readCentralDirectory(reader); +} + +bool +zipper::isZip(const ReaderPtr& reader) +{ + zsize_t centralDirectoryBytes(0); + zsize_t centralDirectoryOffset(0); + zsize_t centralDirectoryEntries(0); + bool result( + readEndCentralDirectory( + reader, + centralDirectoryBytes, + centralDirectoryOffset, + centralDirectoryEntries + ) + ); + return result; +} + diff --git a/software/scsi2sd-util/libzipper-1.0.3/zip.hh b/software/scsi2sd-util/libzipper-1.0.3/zip.hh new file mode 100644 index 0000000..94bb7d4 --- /dev/null +++ b/software/scsi2sd-util/libzipper-1.0.3/zip.hh @@ -0,0 +1,50 @@ +// Copyright (C) 2011 Michael McMaster +// +// This file is part of libzipper. +// +// libzipper is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// libzipper is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with libzipper. If not, see . + +#include "zipper.hh" + +#include +#include + +namespace zipper +{ + struct ZipFileRecord + { + zsize_t localHeaderOffset; + uint32_t crc32; + zsize_t compressedSize; + zsize_t uncompressedSize; + uint16_t dosDate; + uint16_t dosTime; + std::string filename; + }; + + void zip( + const std::string& filename, + const Reader& reader, + const WriterPtr& writer, + ZipFileRecord& outRecord); + + void zipFinalise( + const std::vector& records, + const WriterPtr& writer); + + bool isZip(const ReaderPtr& reader); + + std::vector unzip(const ReaderPtr& reader); +} + diff --git a/software/scsi2sd-util/libzipper-1.0.3/zipper.1.in b/software/scsi2sd-util/libzipper-1.0.3/zipper.1.in new file mode 100644 index 0000000..41b7ebb --- /dev/null +++ b/software/scsi2sd-util/libzipper-1.0.3/zipper.1.in @@ -0,0 +1,70 @@ +.TH ZIPPER 1 "2011-05-26" "libzipper @libzipper_version@" "User Commands" +.SH NAME +zipper \- compress and extract files from archives +.SH SYNOPSIS +.B zipper +{zip|gzip} +.I archive file [files...] +.PP +.B zipper +{unzip|gunzip} +.I archive +.SH DESCRIPTION +.I zipper +provides tools to manage compressed zip and gzip files. +.PP +.I zipper +stores the full path of the specified files when creating an archive, but +does not store any timestamp or permission information. +.PP +.I zipper +extracts files to the full path specified within the archive; the original +archive file is unchanged. +.I zipper +does not support restoring the original +file timestamps or permissions, even if such information is recorded in the +archive. +.SH COMMANDS +.TP +.B zip +Create a new zip archive +.TP +.B unzip +Extract all files from a zip archive. +.TP +.B gzip +Create a new gzip archive +.TP +.B gunzip +Extract the first file from the gzip archive. +.SH OPTIONS +.TP +.B archive +Filename of the compressed zip/gzip file. The special '-' filename is treated +as standard input/output. When creating a new archive, this file will +be overwritten indiscriminately. +.TP +.B files +A list of files to add into the archive. The special '-' filename is treated +as standard input/output. +.SH EXAMPLES +.TP +Create a zip file +zipper zip /tmp/foo.zip bar.txt baz.txt +.TP +Extract a gzip file +zipper gunzip /tmp/foo.gz +.SH CONFORMING TO +.I zipper +supports the DEFLATE algorithm described by RFC1951, and the gzip file format +described by RFC1952. +.SH BUGS +For gzip files, +.I zipper +is able to create an archive containing +multiple files, but can only extract the first file. +.SH SEE ALSO +.BR gunzip (1), +.BR gzip (1), +.BR unzip (1), +.BR zip (1) diff --git a/software/scsi2sd-util/libzipper-1.0.3/zipper.cc b/software/scsi2sd-util/libzipper-1.0.3/zipper.cc new file mode 100644 index 0000000..52c6c1c --- /dev/null +++ b/software/scsi2sd-util/libzipper-1.0.3/zipper.cc @@ -0,0 +1,195 @@ +// Copyright (C) 2011 Michael McMaster +// +// This file is part of libzipper. +// +// libzipper is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// libzipper is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with libzipper. If not, see . + +#include "zipper.hh" +#include "split.hh" +#include +#include "strerror.hh" + +#include +#include +#include +#include +#include +#include + +using namespace zipper; + +static std::string argv0; + +static void usage() +{ + std::cerr << + "libzipper Copyright (C) 2011 Michael McMaster \n" + "This program comes with ABSOLUTELY NO WARRANTY.\n" + "This is free software, and you are welcome to redistribute it\n" + "under certain conditions.\n\n" << + + "Usage: \n" << + argv0 << " {zip|gzip} archive file [files...]\n" << + argv0 << " {unzip|gunzip} archive" << std::endl; +} + +static WriterPtr +getWriter(const std::string& optionName) +{ + std::shared_ptr writer; + if (optionName == "-") + { + writer.reset(new FileWriter("stdout", 1, false)); + } + else + { + writer.reset(new FileWriter(optionName, 0660)); + } + return writer; +} + +static ReaderPtr +getReader(const std::string& optionName) +{ + std::shared_ptr reader; + if (optionName == "-") + { + reader.reset(new FileReader("stdin", 0, false)); + } + else + { + reader.reset(new FileReader(optionName)); + } + return reader; +} + +static void +command_zip(const std::deque& options) +{ + if (options.size() < 2) + { + usage(); + exit(EXIT_FAILURE); + } + + WriterPtr writer(getWriter(options[0])); + Compressor comp(Container_zip, writer); + for (size_t i = 1; i < options.size(); ++i) + { + ReaderPtr reader(getReader(options[i])); + comp.addFile(*reader); + } +} + +static void +command_gzip(const std::deque& options) +{ + if (options.size() != 2) + { + usage(); + exit(EXIT_FAILURE); + } + + WriterPtr writer(getWriter(options[0])); + Compressor comp(Container_gzip, writer); + for (size_t i = 1; i < options.size(); ++i) + { + ReaderPtr reader(getReader(options[i])); + comp.addFile(*reader); + } +} + +static void +command_extract(const std::deque& options) +{ + if (options.size() != 1) + { + usage(); + exit(EXIT_FAILURE); + } + + ReaderPtr reader(getReader(options[0])); + Decompressor decomp(reader); + std::vector entries(decomp.getEntries()); + for (size_t f = 0; f < entries.size(); ++f) + { + std::deque path; + split( + entries[f]->getPath(), + '/', + std::back_insert_iterator >(path)); + path.pop_back(); // Remove extracted file. + std::stringstream builtPath; + for (std::deque::iterator it(path.begin()); + it != path.end(); + ++it) + { + builtPath << *it; + int result(mkdir(builtPath.str().c_str(), 0775)); + if (result != 0 && errno != EEXIST) + { + std::string errMsg(zipper::strerror(errno)); + + std::stringstream message; + message << "Could not create directory " << + "\"" <getPath(), 0660, entries[f]->getModificationTime()); + entries[f]->decompress(writer); + } +} + +int main(int argc, char** argv) +{ + argv0 = argv[0]; + if (argc < 3) + { + usage(); + exit(EXIT_FAILURE); + } + + std::deque options; + for (int i = 1; i < argc; ++i) + { + options.push_back(argv[i]); + } + + std::string command(options[0]); + options.pop_front(); + if (command == "zip") + { + command_zip(options); + } + else if (command == "gzip") + { + command_gzip(options); + } + else if (command == "gunzip" || command == "unzip") + { + command_extract(options); + } + else + { + usage(); + exit(EXIT_FAILURE); + } + + return EXIT_SUCCESS; +} + diff --git a/software/scsi2sd-util/libzipper-1.0.3/zipper.hh b/software/scsi2sd-util/libzipper-1.0.3/zipper.hh new file mode 100644 index 0000000..50e6ec9 --- /dev/null +++ b/software/scsi2sd-util/libzipper-1.0.3/zipper.hh @@ -0,0 +1,591 @@ +// Copyright (C) 2011 Michael McMaster +// +// This file is part of libzipper. +// +// libzipper is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// libzipper is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with libzipper. If not, see . + +#ifndef zipper_hh +#define zipper_hh + +#include +#include +#include +#include + +#include + +#include // For mode_t +#include // For timeval + +/** +\mainpage libzipper C++ (de)compression library + +\section intro Introduction +libzipper offers a flexible C++ interface for reading compressed files +in multiple formats. + +Homepage + +libzipper aims to provide applications a transparent method of accessing +compressed data. eg. libzipper is suited to reading XML config files that +are compressed to save space. + +libzipper is not a general-purpose archive management library, as it +does not provide access to the filesystem attributes of each file. +(ie. libzipper does not support the concepts of file owner, group or +permissions. + +\section formats Supported Formats +
    +
  • gzip
    • +
  • zip
    • +
+ +\section example_read Reading a compressed file into memory +\code +#include +#include +#include + +class MemWriter : public zipper::Writer +{ +public: + std::vector data; + + virtual void writeData( + zsize_t offset, zsize_t bytes, const uint8_t* inData) + { + data.resize(std::max(offset + bytes, data.size())); + std::copy(inData, inData + bytes, &data[offset]); + } + virtual zsize_t getSize() const { return data.size(); } +}; + +std::vector readSavedGame(const std::string& filename) +{ + // open the compressed input file. FileReader will throw an + // exception if an IO error occurs. + zipper::FileReader reader(filename); + + MemWriter writer; + + zipper::Decompressor decomp(reader); + + std::vector entries(decomp.getEntries()); + + if (!entries.empty()) + { + // Uncompress the first file. Will pass-though data as-is if the + // file is not compressed. + entries.front()->decompress(writer); + } + return writer.data; +} + +\endcode + +\section example_write Writing compressed files. +\code +#include +#include +#include + +class MemReader : public zipper::Reader +{ +public: + MemReader(const vector& data) : m_data(data) {} + + virtual const std::string& getSourceName() const + { + static std::string Name("savedGame.dat"); + return Name; + } + + virtual const timeval& getModTime() const + { + return zipper::s_now; + } + + virtual zsize_t getSize() const { return m_data.size(); } + + virtual void readData(zsize_t offset, zsize_t bytes, uint8_t* dest) const + { + std::copy(&m_data[offset], &m_data[offset + bytes], dest); + } + +private: + std::vector m_data; +}; + +void writeSavedGame( + const std::string& filename, const std::vector& gameData) +{ + zipper::FileWriter writer(filename); + zipper::Compressor comp(zipper::Container_zip, writer); + comp.addFile(MemReader(gameData)); +} + +\endcode +*/ + +/// \namespace zipper +/// \brief The zipper namespace contains the libzipper public API. +namespace zipper +{ + /// \typedef zsize_t + /// zsize_t should be used exclusively when dealing with file offsets + /// and sizes to support large files (>4Gb). + /// + /// Unlike size_t on some systems, zsize_t will be 64bit when compiling for + /// a 32bit target. + typedef uint64_t zsize_t; + + /// \enum ContainerFormat + /// ContainerFormat enumerates the compressed archive formats supported + /// by libzipper. + /// + /// An application can determine the supported formats by iterating + /// over the Container_begin to Container_end range. eg. + /// \code + /// for (int i = Container_begin; i < Container_end; ++i) + /// { + /// const Container& container(getContainer(ContainerFormat(i))); + /// } + /// \endcode + enum ContainerFormat + { + /// Iteration marker + Container_begin = 0, + + /// No container (eg. plain text) + Container_none = 0, + + /// ZIP + Container_zip, + + /// gzip. + Container_gzip, + + /// Iteration marker + Container_end + }; + + /// \struct Container + /// Provides libzipper capability details for a compressed archive + /// format. + /// \see getContainer + struct Container + { + /// \enum CapabilityBits allows a bitmask to be specified with a + /// combination of boolean flags. + enum CapabilityBits + { + /// Compression bit is set if the format is usable with Compressor + Compression = 1, + + /// Decompression bit is set if the format is usable with + /// Decompressor + Decompression = 2, + + /// EmbeddedFilenames bit is set if CompressedFile::getPath() is + /// supported + EmbeddedFilenames = 4, + + /// Archive bit is set if multiple compressed files may exist in + /// a single container. + Archive = 8, + + /// FileSize bit is set if the uncompressed size for each + /// compressed file is recorded in the container. + FileSize = 16 + }; + + /// %Container Type + ContainerFormat format; + + /// %Container Internet Media Type (aka MIME type). + /// eg. "application/zip" + std::string mediaType; + + /// Bitmask comprised of CapabilityBits enum values. + uint32_t capabilities; + }; + + /// \brief When passed as a method parameter, it requests that the + /// current time be used instead. + extern const timeval s_now; + + /// \brief Returns the capability details of the given format. + const Container& getContainer(ContainerFormat format); + + /// \brief Base class for all exceptions thrown by libzipper + class Exception : public std::runtime_error + { + public: + /// Exception ctor + /// \param what A description of the error encountered. + Exception(const std::string& what); + }; + + /// \brief Exception thrown when the input data does not match + /// the expected Container format. + class FormatException : public Exception + { + public: + /// FormatException ctor + /// \param what A description of the error encountered. + FormatException(const std::string& what); + }; + + /// \brief Exception thrown when a Reader or Writer instance is unable + /// to satisfy an IO request due to an external error. + class IOException : public Exception + { + public: + /// IOException ctor + /// \param what A description of the error encountered. + IOException(const std::string& what); + }; + + /// \brief Exception thrown when an operation is requested on a compressed + /// archive that libzipper does not implement. + /// + /// This exception may be thrown even if libzipper advertises general + /// support for the Container format. eg. libzipper supports most + /// ZIP files, but an UnsupportedException will be thrown if given an + /// encrypted ZIP file. + class UnsupportedException : public Exception + { + public: + /// UnsupportedException ctor + /// \param what A description of the error encountered. + UnsupportedException(const std::string& what); + }; + + /// \brief Reader supplies input data to the compression/decompression + /// functions. + /// + /// Normally, an application using libzipper provides the Reader + /// implementation. The implementation could supply data from files, + /// in-memory buffers, or it could be generated on-the-fly. + /// + /// The Reader implementation must support random access, and must + /// determine at creation time the number of bytes available. The + /// Reader interface is not suitable for use with streaming data. + class Reader + { + public: + /// Reader dtor + virtual ~Reader(); + + /// Returns a name for this source of the data. + /// + /// For file-based Reader implementations, this would normally be + /// the input filename. + virtual const std::string& getSourceName() const = 0; + + /// Return the last-modified timestamp of the data. + /// If the special s_now value is returned, the current time should be + /// used instead. + virtual const timeval& getModTime() const = 0; + + /// Returns the number of bytes available via readData() + /// + /// \invariant getSize() is stable throughout the lifetime + /// of the Reader instance. + virtual zsize_t getSize() const = 0; + + /// Copies data into the dest buffer + /// + /// An exception must be thrown if it is not possible to copy the + /// requested data into the supplied buffer (eg. file IO error). + /// + /// \pre offset + bytes <= getSize() + /// + /// \param offset Number of bytes to skip at the front of the data + /// source. + /// \param bytes Number of bytes to copy + /// \param dest Destination buffer. + /// + virtual void readData( + zsize_t offset, zsize_t bytes, uint8_t* dest + ) const = 0; + + }; + + /// \brief FileReader is a file-based implementation of the Reader + /// interface. + class FileReader : public Reader + { + public: + /// Read data from the supplied file. + FileReader(const std::string& filename); + + /// Read data from the supplied file. + /// + /// \param filename The value used by getSourceName(). This name + /// is arbitary, and does not need to be related to fd. + /// + /// \param fd The descriptor to source data from. The descriptor + /// must be open for reading, blocking, and seekable (ie. lseek(2)). + /// + /// \param closeFd If true, fd will be closed by this object + /// when it is no longer needed. + FileReader(const std::string& filename, int fd, bool closeFd); + + /// FileReader dtor + virtual ~FileReader(); + + /// Inherited from Reader + virtual const std::string& getSourceName() const; + + /// Inherited from Reader + virtual const timeval& getModTime() const; + + /// Inherited from Reader + virtual zsize_t getSize() const; + + /// Inherited from Reader + virtual void readData( + zsize_t offset, zsize_t bytes, uint8_t* dest + ) const; + private: + FileReader(const FileReader&); + FileReader& operator=(const FileReader&); + + class FileReaderImpl; + FileReaderImpl* m_impl; + }; + + /// \typedef ReaderPtr + /// A shared pointer to a Reader + typedef std::shared_ptr ReaderPtr; + + /// \brief Writer accepts output data from the compression/decompression + /// functions. + /// + /// Normally, an application using libzipper provides the Writer + /// implementation. The implementation could write data to files, + /// in-memory buffers, or it could be simply discarded. + /// + /// The Writer implementation needs only to support sequential access. + class Writer + { + public: + /// Writer dtor + virtual ~Writer(); + + /// Returns the size of the written data. + virtual zsize_t getSize() const = 0; + + /// Accepts output from libzipper + /// + /// An exception must be thrown if it is not possible to accept + /// given data. (eg. file IO error). + /// + /// \param offset Number of bytes to skip at the front of the data + /// source. Skipped bytes will contain null characters if not already + /// assigned a value. + /// \param bytes Number of bytes in data + /// \param data Output from libzipper. + /// + virtual void writeData( + zsize_t offset, zsize_t bytes, const uint8_t* data + ) = 0; + }; + + /// \typedef WriterPtr + /// A shared pointer to a Writer + typedef std::shared_ptr WriterPtr; + + /// \brief FileWrter is a file-based implementation of the Writer + /// interface. + class FileWriter : public Writer + { + public: + /// Write data to the supplied file. + /// If the file already exists, it will be truncated. + /// If the file does not exist, it will be created with the + /// given permissions. + /// + /// \param filename The file to open for writing. + /// + /// \param createPermissions The permissions set on the file if it is to + /// be created. + /// + /// \param modTime Set a specific modification time on the created file. + /// If the special s_now value is provided, the current time will be + /// used. + /// + FileWriter( + const std::string& filename, + mode_t createPermissions = 0664, + const timeval& modTime = s_now); + + /// Write data to the supplied file. + /// + /// \param filename The filename reported in any exception error + /// messages. This name is arbitary, and does not need to be + /// related to fd. + /// + /// \param fd The descriptor to write data to. The descriptor + /// must be open for writing in blocking mode. + /// + /// \param closeFd If true, fd will be closed by this object + /// when it is no longer needed. + FileWriter(const std::string& filename, int fd, bool closeFd); + + /// FileWriter dtor + virtual ~FileWriter(); + + /// Inherited from Writer + virtual zsize_t getSize() const; + + /// Inherited from Writer + virtual void writeData( + zsize_t offset, zsize_t bytes, const uint8_t* data + ); + private: + FileWriter(const FileWriter&); + FileWriter& operator=(const FileWriter&); + + class FileWriterImpl; + FileWriterImpl* m_impl; + }; + + /// \brief CompressedFile represents an entry within a compressed archive. + /// + /// CompressedFile instances are created by Decompressor, and allow + /// selectively extracting the contents of an archive. + class CompressedFile + { + public: + /// CompressedFile dtor + virtual ~CompressedFile(); + + /// Return true if decompress is likely to succeed. + /// + /// isDecompressSupported may return false if libzipper doesn't know + /// how to deal with the compressed data. eg. encrypted files, + /// or ZIP files compressed with non-standard schemes. + virtual bool isDecompressSupported() const = 0; + + /// Decompress the file, and store the results via the given + /// writer object. + virtual void decompress(Writer& writer) = 0; + + /// Return the file path of the compressed file. + /// + /// Unix-style path separaters ('/') are returned, even if the + /// archive was created under an alternative OS. + virtual const std::string& getPath() const = 0; + + /// Return the compressed size of the file + /// + /// getCompressedSize() will return -1 of the FileSize capability + /// bit of the container is false. + virtual zsize_t getCompressedSize() const = 0; + + /// Return the uncompressed size of the file + /// + /// The decompress method will pass exactly this number of bytes + /// to the Writer. + /// + /// getUncompressedSize() will return -1 of the FileSize capability + /// bit of the container is false. + virtual zsize_t getUncompressedSize() const = 0; + + /// Return the modification time of the original file + virtual const timeval& getModificationTime() const = 0; + }; + /// \typedef CompressedFilePtr + /// A shared pointer to a CompressedFile + typedef std::shared_ptr CompressedFilePtr; + + /// \brief Decompressor detects the compressed archive type of the data, + /// and creates suitable CompressedFile instances to access the compressed + /// data. + class Decompressor + { + public: + /// Create a decompressor from the data made available by reader. + Decompressor(const ReaderPtr& reader); + + /// Create a decompressor from the data made available by reader. + /// + /// \param reader must remain in scope for the lifetime of the + /// Decompressor, and lifetime of any CompressedFile objects returned + /// from getEntries() + Decompressor(Reader& reader); + + /// Decompressor dtor + ~Decompressor(); + + /// Return the detected Container type of the compressed archive. + ContainerFormat getContainerFormat() const; + + /// Return CompressedFile entries to represent the file entries within + /// a compressed archive. + std::vector getEntries() const; + private: + Decompressor(const Decompressor&); + Decompressor& operator=(const Decompressor&); + + class DecompressorImpl; + DecompressorImpl* m_decompressor; + }; + + /// \brief Compressor creates a compressed archive from the supplied + /// Reader objects. + /// data. + class Compressor + { + public: + /// Create a Compressor to output the given compressed archived format + /// to writer. + /// \param writer destination of the compressed data + /// \param format determines the output archive file type to + /// create. + Compressor(ContainerFormat format, const WriterPtr& writer); + + /// Create a Compressor to output the given compressed archived format + /// to writer. + /// + /// \param writer is the destination of the compressed data. writer + /// must remain in scope for the lifetime of the Compressor. + /// \param format determines the output archive file type to + /// create. + Compressor(ContainerFormat format, Writer& writer); + + /// \brief Compressor dtor + /// + /// Additional data may be passed to writer (given in ctor) to close + /// the compressed archive. + ~Compressor(); + + /// Compress the data given by reader, and add it to the compressed + /// archive. + void addFile(const Reader& reader); + + class CompressorImpl; + private: + Compressor(const Compressor&); + Compressor& operator=(const Compressor&); + + CompressorImpl* m_compressor; + }; +} + +#endif + diff --git a/software/scsi2sd-util/scsi2sd-util.cc b/software/scsi2sd-util/scsi2sd-util.cc index e847707..4c4a682 100644 --- a/software/scsi2sd-util/scsi2sd-util.cc +++ b/software/scsi2sd-util/scsi2sd-util.cc @@ -29,6 +29,8 @@ #include #include +#include + #include "ConfigUtil.hh" #include "TargetPanel.hh" #include "SCSI2SD_Bootloader.hh" diff --git a/software/scsi2sd-util/zlib-1.2.8/CMakeLists.txt b/software/scsi2sd-util/zlib-1.2.8/CMakeLists.txt new file mode 100644 index 0000000..0c0247c --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/CMakeLists.txt @@ -0,0 +1,249 @@ +cmake_minimum_required(VERSION 2.4.4) +set(CMAKE_ALLOW_LOOSE_LOOP_CONSTRUCTS ON) + +project(zlib C) + +set(VERSION "1.2.8") + +option(ASM686 "Enable building i686 assembly implementation") +option(AMD64 "Enable building amd64 assembly implementation") + +set(INSTALL_BIN_DIR "${CMAKE_INSTALL_PREFIX}/bin" CACHE PATH "Installation directory for executables") +set(INSTALL_LIB_DIR "${CMAKE_INSTALL_PREFIX}/lib" CACHE PATH "Installation directory for libraries") +set(INSTALL_INC_DIR "${CMAKE_INSTALL_PREFIX}/include" CACHE PATH "Installation directory for headers") +set(INSTALL_MAN_DIR "${CMAKE_INSTALL_PREFIX}/share/man" CACHE PATH "Installation directory for manual pages") +set(INSTALL_PKGCONFIG_DIR "${CMAKE_INSTALL_PREFIX}/share/pkgconfig" CACHE PATH "Installation directory for pkgconfig (.pc) files") + +include(CheckTypeSize) +include(CheckFunctionExists) +include(CheckIncludeFile) +include(CheckCSourceCompiles) +enable_testing() + +check_include_file(sys/types.h HAVE_SYS_TYPES_H) +check_include_file(stdint.h HAVE_STDINT_H) +check_include_file(stddef.h HAVE_STDDEF_H) + +# +# Check to see if we have large file support +# +set(CMAKE_REQUIRED_DEFINITIONS -D_LARGEFILE64_SOURCE=1) +# We add these other definitions here because CheckTypeSize.cmake +# in CMake 2.4.x does not automatically do so and we want +# compatibility with CMake 2.4.x. +if(HAVE_SYS_TYPES_H) + list(APPEND CMAKE_REQUIRED_DEFINITIONS -DHAVE_SYS_TYPES_H) +endif() +if(HAVE_STDINT_H) + list(APPEND CMAKE_REQUIRED_DEFINITIONS -DHAVE_STDINT_H) +endif() +if(HAVE_STDDEF_H) + list(APPEND CMAKE_REQUIRED_DEFINITIONS -DHAVE_STDDEF_H) +endif() +check_type_size(off64_t OFF64_T) +if(HAVE_OFF64_T) + add_definitions(-D_LARGEFILE64_SOURCE=1) +endif() +set(CMAKE_REQUIRED_DEFINITIONS) # clear variable + +# +# Check for fseeko +# +check_function_exists(fseeko HAVE_FSEEKO) +if(NOT HAVE_FSEEKO) + add_definitions(-DNO_FSEEKO) +endif() + +# +# Check for unistd.h +# +check_include_file(unistd.h Z_HAVE_UNISTD_H) + +if(MSVC) + set(CMAKE_DEBUG_POSTFIX "d") + add_definitions(-D_CRT_SECURE_NO_DEPRECATE) + add_definitions(-D_CRT_NONSTDC_NO_DEPRECATE) + include_directories(${CMAKE_CURRENT_SOURCE_DIR}) +endif() + +if(NOT CMAKE_CURRENT_SOURCE_DIR STREQUAL CMAKE_CURRENT_BINARY_DIR) + # If we're doing an out of source build and the user has a zconf.h + # in their source tree... + if(EXISTS ${CMAKE_CURRENT_SOURCE_DIR}/zconf.h) + message(STATUS "Renaming") + message(STATUS " ${CMAKE_CURRENT_SOURCE_DIR}/zconf.h") + message(STATUS "to 'zconf.h.included' because this file is included with zlib") + message(STATUS "but CMake generates it automatically in the build directory.") + file(RENAME ${CMAKE_CURRENT_SOURCE_DIR}/zconf.h ${CMAKE_CURRENT_SOURCE_DIR}/zconf.h.included) + endif() +endif() + +set(ZLIB_PC ${CMAKE_CURRENT_BINARY_DIR}/zlib.pc) +configure_file( ${CMAKE_CURRENT_SOURCE_DIR}/zlib.pc.cmakein + ${ZLIB_PC} @ONLY) +configure_file( ${CMAKE_CURRENT_SOURCE_DIR}/zconf.h.cmakein + ${CMAKE_CURRENT_BINARY_DIR}/zconf.h @ONLY) +include_directories(${CMAKE_CURRENT_BINARY_DIR} ${CMAKE_SOURCE_DIR}) + + +#============================================================================ +# zlib +#============================================================================ + +set(ZLIB_PUBLIC_HDRS + ${CMAKE_CURRENT_BINARY_DIR}/zconf.h + zlib.h +) +set(ZLIB_PRIVATE_HDRS + crc32.h + deflate.h + gzguts.h + inffast.h + inffixed.h + inflate.h + inftrees.h + trees.h + zutil.h +) +set(ZLIB_SRCS + adler32.c + compress.c + crc32.c + deflate.c + gzclose.c + gzlib.c + gzread.c + gzwrite.c + inflate.c + infback.c + inftrees.c + inffast.c + trees.c + uncompr.c + zutil.c +) + +if(NOT MINGW) + set(ZLIB_DLL_SRCS + win32/zlib1.rc # If present will override custom build rule below. + ) +endif() + +if(CMAKE_COMPILER_IS_GNUCC) + if(ASM686) + set(ZLIB_ASMS contrib/asm686/match.S) + elseif (AMD64) + set(ZLIB_ASMS contrib/amd64/amd64-match.S) + endif () + + if(ZLIB_ASMS) + add_definitions(-DASMV) + set_source_files_properties(${ZLIB_ASMS} PROPERTIES LANGUAGE C COMPILE_FLAGS -DNO_UNDERLINE) + endif() +endif() + +if(MSVC) + if(ASM686) + ENABLE_LANGUAGE(ASM_MASM) + set(ZLIB_ASMS + contrib/masmx86/inffas32.asm + contrib/masmx86/match686.asm + ) + elseif (AMD64) + ENABLE_LANGUAGE(ASM_MASM) + set(ZLIB_ASMS + contrib/masmx64/gvmat64.asm + contrib/masmx64/inffasx64.asm + ) + endif() + + if(ZLIB_ASMS) + add_definitions(-DASMV -DASMINF) + endif() +endif() + +# parse the full version number from zlib.h and include in ZLIB_FULL_VERSION +file(READ ${CMAKE_CURRENT_SOURCE_DIR}/zlib.h _zlib_h_contents) +string(REGEX REPLACE ".*#define[ \t]+ZLIB_VERSION[ \t]+\"([-0-9A-Za-z.]+)\".*" + "\\1" ZLIB_FULL_VERSION ${_zlib_h_contents}) + +if(MINGW) + # This gets us DLL resource information when compiling on MinGW. + if(NOT CMAKE_RC_COMPILER) + set(CMAKE_RC_COMPILER windres.exe) + endif() + + add_custom_command(OUTPUT ${CMAKE_CURRENT_BINARY_DIR}/zlib1rc.obj + COMMAND ${CMAKE_RC_COMPILER} + -D GCC_WINDRES + -I ${CMAKE_CURRENT_SOURCE_DIR} + -I ${CMAKE_CURRENT_BINARY_DIR} + -o ${CMAKE_CURRENT_BINARY_DIR}/zlib1rc.obj + -i ${CMAKE_CURRENT_SOURCE_DIR}/win32/zlib1.rc) + set(ZLIB_DLL_SRCS ${CMAKE_CURRENT_BINARY_DIR}/zlib1rc.obj) +endif(MINGW) + +add_library(zlib SHARED ${ZLIB_SRCS} ${ZLIB_ASMS} ${ZLIB_DLL_SRCS} ${ZLIB_PUBLIC_HDRS} ${ZLIB_PRIVATE_HDRS}) +add_library(zlibstatic STATIC ${ZLIB_SRCS} ${ZLIB_ASMS} ${ZLIB_PUBLIC_HDRS} ${ZLIB_PRIVATE_HDRS}) +set_target_properties(zlib PROPERTIES DEFINE_SYMBOL ZLIB_DLL) +set_target_properties(zlib PROPERTIES SOVERSION 1) + +if(NOT CYGWIN) + # This property causes shared libraries on Linux to have the full version + # encoded into their final filename. We disable this on Cygwin because + # it causes cygz-${ZLIB_FULL_VERSION}.dll to be created when cygz.dll + # seems to be the default. + # + # This has no effect with MSVC, on that platform the version info for + # the DLL comes from the resource file win32/zlib1.rc + set_target_properties(zlib PROPERTIES VERSION ${ZLIB_FULL_VERSION}) +endif() + +if(UNIX) + # On unix-like platforms the library is almost always called libz + set_target_properties(zlib zlibstatic PROPERTIES OUTPUT_NAME z) + if(NOT APPLE) + set_target_properties(zlib PROPERTIES LINK_FLAGS "-Wl,--version-script,\"${CMAKE_CURRENT_SOURCE_DIR}/zlib.map\"") + endif() +elseif(BUILD_SHARED_LIBS AND WIN32) + # Creates zlib1.dll when building shared library version + set_target_properties(zlib PROPERTIES SUFFIX "1.dll") +endif() + +if(NOT SKIP_INSTALL_LIBRARIES AND NOT SKIP_INSTALL_ALL ) + install(TARGETS zlib zlibstatic + RUNTIME DESTINATION "${INSTALL_BIN_DIR}" + ARCHIVE DESTINATION "${INSTALL_LIB_DIR}" + LIBRARY DESTINATION "${INSTALL_LIB_DIR}" ) +endif() +if(NOT SKIP_INSTALL_HEADERS AND NOT SKIP_INSTALL_ALL ) + install(FILES ${ZLIB_PUBLIC_HDRS} DESTINATION "${INSTALL_INC_DIR}") +endif() +if(NOT SKIP_INSTALL_FILES AND NOT SKIP_INSTALL_ALL ) + install(FILES zlib.3 DESTINATION "${INSTALL_MAN_DIR}/man3") +endif() +if(NOT SKIP_INSTALL_FILES AND NOT SKIP_INSTALL_ALL ) + install(FILES ${ZLIB_PC} DESTINATION "${INSTALL_PKGCONFIG_DIR}") +endif() + +#============================================================================ +# Example binaries +#============================================================================ + +add_executable(example test/example.c) +target_link_libraries(example zlib) +add_test(example example) + +add_executable(minigzip test/minigzip.c) +target_link_libraries(minigzip zlib) + +if(HAVE_OFF64_T) + add_executable(example64 test/example.c) + target_link_libraries(example64 zlib) + set_target_properties(example64 PROPERTIES COMPILE_FLAGS "-D_FILE_OFFSET_BITS=64") + add_test(example64 example64) + + add_executable(minigzip64 test/minigzip.c) + target_link_libraries(minigzip64 zlib) + set_target_properties(minigzip64 PROPERTIES COMPILE_FLAGS "-D_FILE_OFFSET_BITS=64") +endif() diff --git a/software/scsi2sd-util/zlib-1.2.8/ChangeLog b/software/scsi2sd-util/zlib-1.2.8/ChangeLog new file mode 100644 index 0000000..f22aaba --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/ChangeLog @@ -0,0 +1,1472 @@ + + ChangeLog file for zlib + +Changes in 1.2.8 (28 Apr 2013) +- Update contrib/minizip/iowin32.c for Windows RT [Vollant] +- Do not force Z_CONST for C++ +- Clean up contrib/vstudio [Ro§] +- Correct spelling error in zlib.h +- Fix mixed line endings in contrib/vstudio + +Changes in 1.2.7.3 (13 Apr 2013) +- Fix version numbers and DLL names in contrib/vstudio/*/zlib.rc + +Changes in 1.2.7.2 (13 Apr 2013) +- Change check for a four-byte type back to hexadecimal +- Fix typo in win32/Makefile.msc +- Add casts in gzwrite.c for pointer differences + +Changes in 1.2.7.1 (24 Mar 2013) +- Replace use of unsafe string functions with snprintf if available +- Avoid including stddef.h on Windows for Z_SOLO compile [Niessink] +- Fix gzgetc undefine when Z_PREFIX set [Turk] +- Eliminate use of mktemp in Makefile (not always available) +- Fix bug in 'F' mode for gzopen() +- Add inflateGetDictionary() function +- Correct comment in deflate.h +- Use _snprintf for snprintf in Microsoft C +- On Darwin, only use /usr/bin/libtool if libtool is not Apple +- Delete "--version" file if created by "ar --version" [Richard G.] +- Fix configure check for veracity of compiler error return codes +- Fix CMake compilation of static lib for MSVC2010 x64 +- Remove unused variable in infback9.c +- Fix argument checks in gzlog_compress() and gzlog_write() +- Clean up the usage of z_const and respect const usage within zlib +- Clean up examples/gzlog.[ch] comparisons of different types +- Avoid shift equal to bits in type (caused endless loop) +- Fix unintialized value bug in gzputc() introduced by const patches +- Fix memory allocation error in examples/zran.c [Nor] +- Fix bug where gzopen(), gzclose() would write an empty file +- Fix bug in gzclose() when gzwrite() runs out of memory +- Check for input buffer malloc failure in examples/gzappend.c +- Add note to contrib/blast to use binary mode in stdio +- Fix comparisons of differently signed integers in contrib/blast +- Check for invalid code length codes in contrib/puff +- Fix serious but very rare decompression bug in inftrees.c +- Update inflateBack() comments, since inflate() can be faster +- Use underscored I/O function names for WINAPI_FAMILY +- Add _tr_flush_bits to the external symbols prefixed by --zprefix +- Add contrib/vstudio/vc10 pre-build step for static only +- Quote --version-script argument in CMakeLists.txt +- Don't specify --version-script on Apple platforms in CMakeLists.txt +- Fix casting error in contrib/testzlib/testzlib.c +- Fix types in contrib/minizip to match result of get_crc_table() +- Simplify contrib/vstudio/vc10 with 'd' suffix +- Add TOP support to win32/Makefile.msc +- Suport i686 and amd64 assembler builds in CMakeLists.txt +- Fix typos in the use of _LARGEFILE64_SOURCE in zconf.h +- Add vc11 and vc12 build files to contrib/vstudio +- Add gzvprintf() as an undocumented function in zlib +- Fix configure for Sun shell +- Remove runtime check in configure for four-byte integer type +- Add casts and consts to ease user conversion to C++ +- Add man pages for minizip and miniunzip +- In Makefile uninstall, don't rm if preceding cd fails +- Do not return Z_BUF_ERROR if deflateParam() has nothing to write + +Changes in 1.2.7 (2 May 2012) +- Replace use of memmove() with a simple copy for portability +- Test for existence of strerror +- Restore gzgetc_ for backward compatibility with 1.2.6 +- Fix build with non-GNU make on Solaris +- Require gcc 4.0 or later on Mac OS X to use the hidden attribute +- Include unistd.h for Watcom C +- Use __WATCOMC__ instead of __WATCOM__ +- Do not use the visibility attribute if NO_VIZ defined +- Improve the detection of no hidden visibility attribute +- Avoid using __int64 for gcc or solo compilation +- Cast to char * in gzprintf to avoid warnings [Zinser] +- Fix make_vms.com for VAX [Zinser] +- Don't use library or built-in byte swaps +- Simplify test and use of gcc hidden attribute +- Fix bug in gzclose_w() when gzwrite() fails to allocate memory +- Add "x" (O_EXCL) and "e" (O_CLOEXEC) modes support to gzopen() +- Fix bug in test/minigzip.c for configure --solo +- Fix contrib/vstudio project link errors [Mohanathas] +- Add ability to choose the builder in make_vms.com [Schweda] +- Add DESTDIR support to mingw32 win32/Makefile.gcc +- Fix comments in win32/Makefile.gcc for proper usage +- Allow overriding the default install locations for cmake +- Generate and install the pkg-config file with cmake +- Build both a static and a shared version of zlib with cmake +- Include version symbols for cmake builds +- If using cmake with MSVC, add the source directory to the includes +- Remove unneeded EXTRA_CFLAGS from win32/Makefile.gcc [Truta] +- Move obsolete emx makefile to old [Truta] +- Allow the use of -Wundef when compiling or using zlib +- Avoid the use of the -u option with mktemp +- Improve inflate() documentation on the use of Z_FINISH +- Recognize clang as gcc +- Add gzopen_w() in Windows for wide character path names +- Rename zconf.h in CMakeLists.txt to move it out of the way +- Add source directory in CMakeLists.txt for building examples +- Look in build directory for zlib.pc in CMakeLists.txt +- Remove gzflags from zlibvc.def in vc9 and vc10 +- Fix contrib/minizip compilation in the MinGW environment +- Update ./configure for Solaris, support --64 [Mooney] +- Remove -R. from Solaris shared build (possible security issue) +- Avoid race condition for parallel make (-j) running example +- Fix type mismatch between get_crc_table() and crc_table +- Fix parsing of version with "-" in CMakeLists.txt [Snider, Ziegler] +- Fix the path to zlib.map in CMakeLists.txt +- Force the native libtool in Mac OS X to avoid GNU libtool [Beebe] +- Add instructions to win32/Makefile.gcc for shared install [Torri] + +Changes in 1.2.6.1 (12 Feb 2012) +- Avoid the use of the Objective-C reserved name "id" +- Include io.h in gzguts.h for Microsoft compilers +- Fix problem with ./configure --prefix and gzgetc macro +- Include gz_header definition when compiling zlib solo +- Put gzflags() functionality back in zutil.c +- Avoid library header include in crc32.c for Z_SOLO +- Use name in GCC_CLASSIC as C compiler for coverage testing, if set +- Minor cleanup in contrib/minizip/zip.c [Vollant] +- Update make_vms.com [Zinser] +- Remove unnecessary gzgetc_ function +- Use optimized byte swap operations for Microsoft and GNU [Snyder] +- Fix minor typo in zlib.h comments [Rzesniowiecki] + +Changes in 1.2.6 (29 Jan 2012) +- Update the Pascal interface in contrib/pascal +- Fix function numbers for gzgetc_ in zlibvc.def files +- Fix configure.ac for contrib/minizip [Schiffer] +- Fix large-entry detection in minizip on 64-bit systems [Schiffer] +- Have ./configure use the compiler return code for error indication +- Fix CMakeLists.txt for cross compilation [McClure] +- Fix contrib/minizip/zip.c for 64-bit architectures [Dalsnes] +- Fix compilation of contrib/minizip on FreeBSD [Marquez] +- Correct suggested usages in win32/Makefile.msc [Shachar, Horvath] +- Include io.h for Turbo C / Borland C on all platforms [Truta] +- Make version explicit in contrib/minizip/configure.ac [Bosmans] +- Avoid warning for no encryption in contrib/minizip/zip.c [Vollant] +- Minor cleanup up contrib/minizip/unzip.c [Vollant] +- Fix bug when compiling minizip with C++ [Vollant] +- Protect for long name and extra fields in contrib/minizip [Vollant] +- Avoid some warnings in contrib/minizip [Vollant] +- Add -I../.. -L../.. to CFLAGS for minizip and miniunzip +- Add missing libs to minizip linker command +- Add support for VPATH builds in contrib/minizip +- Add an --enable-demos option to contrib/minizip/configure +- Add the generation of configure.log by ./configure +- Exit when required parameters not provided to win32/Makefile.gcc +- Have gzputc return the character written instead of the argument +- Use the -m option on ldconfig for BSD systems [Tobias] +- Correct in zlib.map when deflateResetKeep was added + +Changes in 1.2.5.3 (15 Jan 2012) +- Restore gzgetc function for binary compatibility +- Do not use _lseeki64 under Borland C++ [Truta] +- Update win32/Makefile.msc to build test/*.c [Truta] +- Remove old/visualc6 given CMakefile and other alternatives +- Update AS400 build files and documentation [Monnerat] +- Update win32/Makefile.gcc to build test/*.c [Truta] +- Permit stronger flushes after Z_BLOCK flushes +- Avoid extraneous empty blocks when doing empty flushes +- Permit Z_NULL arguments to deflatePending +- Allow deflatePrime() to insert bits in the middle of a stream +- Remove second empty static block for Z_PARTIAL_FLUSH +- Write out all of the available bits when using Z_BLOCK +- Insert the first two strings in the hash table after a flush + +Changes in 1.2.5.2 (17 Dec 2011) +- fix ld error: unable to find version dependency 'ZLIB_1.2.5' +- use relative symlinks for shared libs +- Avoid searching past window for Z_RLE strategy +- Assure that high-water mark initialization is always applied in deflate +- Add assertions to fill_window() in deflate.c to match comments +- Update python link in README +- Correct spelling error in gzread.c +- Fix bug in gzgets() for a concatenated empty gzip stream +- Correct error in comment for gz_make() +- Change gzread() and related to ignore junk after gzip streams +- Allow gzread() and related to continue after gzclearerr() +- Allow gzrewind() and gzseek() after a premature end-of-file +- Simplify gzseek() now that raw after gzip is ignored +- Change gzgetc() to a macro for speed (~40% speedup in testing) +- Fix gzclose() to return the actual error last encountered +- Always add large file support for windows +- Include zconf.h for windows large file support +- Include zconf.h.cmakein for windows large file support +- Update zconf.h.cmakein on make distclean +- Merge vestigial vsnprintf determination from zutil.h to gzguts.h +- Clarify how gzopen() appends in zlib.h comments +- Correct documentation of gzdirect() since junk at end now ignored +- Add a transparent write mode to gzopen() when 'T' is in the mode +- Update python link in zlib man page +- Get inffixed.h and MAKEFIXED result to match +- Add a ./config --solo option to make zlib subset with no libary use +- Add undocumented inflateResetKeep() function for CAB file decoding +- Add --cover option to ./configure for gcc coverage testing +- Add #define ZLIB_CONST option to use const in the z_stream interface +- Add comment to gzdopen() in zlib.h to use dup() when using fileno() +- Note behavior of uncompress() to provide as much data as it can +- Add files in contrib/minizip to aid in building libminizip +- Split off AR options in Makefile.in and configure +- Change ON macro to Z_ARG to avoid application conflicts +- Facilitate compilation with Borland C++ for pragmas and vsnprintf +- Include io.h for Turbo C / Borland C++ +- Move example.c and minigzip.c to test/ +- Simplify incomplete code table filling in inflate_table() +- Remove code from inflate.c and infback.c that is impossible to execute +- Test the inflate code with full coverage +- Allow deflateSetDictionary, inflateSetDictionary at any time (in raw) +- Add deflateResetKeep and fix inflateResetKeep to retain dictionary +- Fix gzwrite.c to accommodate reduced memory zlib compilation +- Have inflate() with Z_FINISH avoid the allocation of a window +- Do not set strm->adler when doing raw inflate +- Fix gzeof() to behave just like feof() when read is not past end of file +- Fix bug in gzread.c when end-of-file is reached +- Avoid use of Z_BUF_ERROR in gz* functions except for premature EOF +- Document gzread() capability to read concurrently written files +- Remove hard-coding of resource compiler in CMakeLists.txt [Blammo] + +Changes in 1.2.5.1 (10 Sep 2011) +- Update FAQ entry on shared builds (#13) +- Avoid symbolic argument to chmod in Makefile.in +- Fix bug and add consts in contrib/puff [Oberhumer] +- Update contrib/puff/zeros.raw test file to have all block types +- Add full coverage test for puff in contrib/puff/Makefile +- Fix static-only-build install in Makefile.in +- Fix bug in unzGetCurrentFileInfo() in contrib/minizip [Kuno] +- Add libz.a dependency to shared in Makefile.in for parallel builds +- Spell out "number" (instead of "nb") in zlib.h for total_in, total_out +- Replace $(...) with `...` in configure for non-bash sh [Bowler] +- Add darwin* to Darwin* and solaris* to SunOS\ 5* in configure [Groffen] +- Add solaris* to Linux* in configure to allow gcc use [Groffen] +- Add *bsd* to Linux* case in configure [Bar-Lev] +- Add inffast.obj to dependencies in win32/Makefile.msc +- Correct spelling error in deflate.h [Kohler] +- Change libzdll.a again to libz.dll.a (!) in win32/Makefile.gcc +- Add test to configure for GNU C looking for gcc in output of $cc -v +- Add zlib.pc generation to win32/Makefile.gcc [Weigelt] +- Fix bug in zlib.h for _FILE_OFFSET_BITS set and _LARGEFILE64_SOURCE not +- Add comment in zlib.h that adler32_combine with len2 < 0 makes no sense +- Make NO_DIVIDE option in adler32.c much faster (thanks to John Reiser) +- Make stronger test in zconf.h to include unistd.h for LFS +- Apply Darwin patches for 64-bit file offsets to contrib/minizip [Slack] +- Fix zlib.h LFS support when Z_PREFIX used +- Add updated as400 support (removed from old) [Monnerat] +- Avoid deflate sensitivity to volatile input data +- Avoid division in adler32_combine for NO_DIVIDE +- Clarify the use of Z_FINISH with deflateBound() amount of space +- Set binary for output file in puff.c +- Use u4 type for crc_table to avoid conversion warnings +- Apply casts in zlib.h to avoid conversion warnings +- Add OF to prototypes for adler32_combine_ and crc32_combine_ [Miller] +- Improve inflateSync() documentation to note indeterminancy +- Add deflatePending() function to return the amount of pending output +- Correct the spelling of "specification" in FAQ [Randers-Pehrson] +- Add a check in configure for stdarg.h, use for gzprintf() +- Check that pointers fit in ints when gzprint() compiled old style +- Add dummy name before $(SHAREDLIBV) in Makefile [Bar-Lev, Bowler] +- Delete line in configure that adds -L. libz.a to LDFLAGS [Weigelt] +- Add debug records in assmebler code [Londer] +- Update RFC references to use http://tools.ietf.org/html/... [Li] +- Add --archs option, use of libtool to configure for Mac OS X [Borstel] + +Changes in 1.2.5 (19 Apr 2010) +- Disable visibility attribute in win32/Makefile.gcc [Bar-Lev] +- Default to libdir as sharedlibdir in configure [Nieder] +- Update copyright dates on modified source files +- Update trees.c to be able to generate modified trees.h +- Exit configure for MinGW, suggesting win32/Makefile.gcc +- Check for NULL path in gz_open [Homurlu] + +Changes in 1.2.4.5 (18 Apr 2010) +- Set sharedlibdir in configure [Torok] +- Set LDFLAGS in Makefile.in [Bar-Lev] +- Avoid mkdir objs race condition in Makefile.in [Bowler] +- Add ZLIB_INTERNAL in front of internal inter-module functions and arrays +- Define ZLIB_INTERNAL to hide internal functions and arrays for GNU C +- Don't use hidden attribute when it is a warning generator (e.g. Solaris) + +Changes in 1.2.4.4 (18 Apr 2010) +- Fix CROSS_PREFIX executable testing, CHOST extract, mingw* [Torok] +- Undefine _LARGEFILE64_SOURCE in zconf.h if it is zero, but not if empty +- Try to use bash or ksh regardless of functionality of /bin/sh +- Fix configure incompatibility with NetBSD sh +- Remove attempt to run under bash or ksh since have better NetBSD fix +- Fix win32/Makefile.gcc for MinGW [Bar-Lev] +- Add diagnostic messages when using CROSS_PREFIX in configure +- Added --sharedlibdir option to configure [Weigelt] +- Use hidden visibility attribute when available [Frysinger] + +Changes in 1.2.4.3 (10 Apr 2010) +- Only use CROSS_PREFIX in configure for ar and ranlib if they exist +- Use CROSS_PREFIX for nm [Bar-Lev] +- Assume _LARGEFILE64_SOURCE defined is equivalent to true +- Avoid use of undefined symbols in #if with && and || +- Make *64 prototypes in gzguts.h consistent with functions +- Add -shared load option for MinGW in configure [Bowler] +- Move z_off64_t to public interface, use instead of off64_t +- Remove ! from shell test in configure (not portable to Solaris) +- Change +0 macro tests to -0 for possibly increased portability + +Changes in 1.2.4.2 (9 Apr 2010) +- Add consistent carriage returns to readme.txt's in masmx86 and masmx64 +- Really provide prototypes for *64 functions when building without LFS +- Only define unlink() in minigzip.c if unistd.h not included +- Update README to point to contrib/vstudio project files +- Move projects/vc6 to old/ and remove projects/ +- Include stdlib.h in minigzip.c for setmode() definition under WinCE +- Clean up assembler builds in win32/Makefile.msc [Rowe] +- Include sys/types.h for Microsoft for off_t definition +- Fix memory leak on error in gz_open() +- Symbolize nm as $NM in configure [Weigelt] +- Use TEST_LDSHARED instead of LDSHARED to link test programs [Weigelt] +- Add +0 to _FILE_OFFSET_BITS and _LFS64_LARGEFILE in case not defined +- Fix bug in gzeof() to take into account unused input data +- Avoid initialization of structures with variables in puff.c +- Updated win32/README-WIN32.txt [Rowe] + +Changes in 1.2.4.1 (28 Mar 2010) +- Remove the use of [a-z] constructs for sed in configure [gentoo 310225] +- Remove $(SHAREDLIB) from LIBS in Makefile.in [Creech] +- Restore "for debugging" comment on sprintf() in gzlib.c +- Remove fdopen for MVS from gzguts.h +- Put new README-WIN32.txt in win32 [Rowe] +- Add check for shell to configure and invoke another shell if needed +- Fix big fat stinking bug in gzseek() on uncompressed files +- Remove vestigial F_OPEN64 define in zutil.h +- Set and check the value of _LARGEFILE_SOURCE and _LARGEFILE64_SOURCE +- Avoid errors on non-LFS systems when applications define LFS macros +- Set EXE to ".exe" in configure for MINGW [Kahle] +- Match crc32() in crc32.c exactly to the prototype in zlib.h [Sherrill] +- Add prefix for cross-compilation in win32/makefile.gcc [Bar-Lev] +- Add DLL install in win32/makefile.gcc [Bar-Lev] +- Allow Linux* or linux* from uname in configure [Bar-Lev] +- Allow ldconfig to be redefined in configure and Makefile.in [Bar-Lev] +- Add cross-compilation prefixes to configure [Bar-Lev] +- Match type exactly in gz_load() invocation in gzread.c +- Match type exactly of zcalloc() in zutil.c to zlib.h alloc_func +- Provide prototypes for *64 functions when building zlib without LFS +- Don't use -lc when linking shared library on MinGW +- Remove errno.h check in configure and vestigial errno code in zutil.h + +Changes in 1.2.4 (14 Mar 2010) +- Fix VER3 extraction in configure for no fourth subversion +- Update zlib.3, add docs to Makefile.in to make .pdf out of it +- Add zlib.3.pdf to distribution +- Don't set error code in gzerror() if passed pointer is NULL +- Apply destination directory fixes to CMakeLists.txt [Lowman] +- Move #cmakedefine's to a new zconf.in.cmakein +- Restore zconf.h for builds that don't use configure or cmake +- Add distclean to dummy Makefile for convenience +- Update and improve INDEX, README, and FAQ +- Update CMakeLists.txt for the return of zconf.h [Lowman] +- Update contrib/vstudio/vc9 and vc10 [Vollant] +- Change libz.dll.a back to libzdll.a in win32/Makefile.gcc +- Apply license and readme changes to contrib/asm686 [Raiter] +- Check file name lengths and add -c option in minigzip.c [Li] +- Update contrib/amd64 and contrib/masmx86/ [Vollant] +- Avoid use of "eof" parameter in trees.c to not shadow library variable +- Update make_vms.com for removal of zlibdefs.h [Zinser] +- Update assembler code and vstudio projects in contrib [Vollant] +- Remove outdated assembler code contrib/masm686 and contrib/asm586 +- Remove old vc7 and vc8 from contrib/vstudio +- Update win32/Makefile.msc, add ZLIB_VER_SUBREVISION [Rowe] +- Fix memory leaks in gzclose_r() and gzclose_w(), file leak in gz_open() +- Add contrib/gcc_gvmat64 for longest_match and inflate_fast [Vollant] +- Remove *64 functions from win32/zlib.def (they're not 64-bit yet) +- Fix bug in void-returning vsprintf() case in gzwrite.c +- Fix name change from inflate.h in contrib/inflate86/inffas86.c +- Check if temporary file exists before removing in make_vms.com [Zinser] +- Fix make install and uninstall for --static option +- Fix usage of _MSC_VER in gzguts.h and zutil.h [Truta] +- Update readme.txt in contrib/masmx64 and masmx86 to assemble + +Changes in 1.2.3.9 (21 Feb 2010) +- Expunge gzio.c +- Move as400 build information to old +- Fix updates in contrib/minizip and contrib/vstudio +- Add const to vsnprintf test in configure to avoid warnings [Weigelt] +- Delete zconf.h (made by configure) [Weigelt] +- Change zconf.in.h to zconf.h.in per convention [Weigelt] +- Check for NULL buf in gzgets() +- Return empty string for gzgets() with len == 1 (like fgets()) +- Fix description of gzgets() in zlib.h for end-of-file, NULL return +- Update minizip to 1.1 [Vollant] +- Avoid MSVC loss of data warnings in gzread.c, gzwrite.c +- Note in zlib.h that gzerror() should be used to distinguish from EOF +- Remove use of snprintf() from gzlib.c +- Fix bug in gzseek() +- Update contrib/vstudio, adding vc9 and vc10 [Kuno, Vollant] +- Fix zconf.h generation in CMakeLists.txt [Lowman] +- Improve comments in zconf.h where modified by configure + +Changes in 1.2.3.8 (13 Feb 2010) +- Clean up text files (tabs, trailing whitespace, etc.) [Oberhumer] +- Use z_off64_t in gz_zero() and gz_skip() to match state->skip +- Avoid comparison problem when sizeof(int) == sizeof(z_off64_t) +- Revert to Makefile.in from 1.2.3.6 (live with the clutter) +- Fix missing error return in gzflush(), add zlib.h note +- Add *64 functions to zlib.map [Levin] +- Fix signed/unsigned comparison in gz_comp() +- Use SFLAGS when testing shared linking in configure +- Add --64 option to ./configure to use -m64 with gcc +- Fix ./configure --help to correctly name options +- Have make fail if a test fails [Levin] +- Avoid buffer overrun in contrib/masmx64/gvmat64.asm [Simpson] +- Remove assembler object files from contrib + +Changes in 1.2.3.7 (24 Jan 2010) +- Always gzopen() with O_LARGEFILE if available +- Fix gzdirect() to work immediately after gzopen() or gzdopen() +- Make gzdirect() more precise when the state changes while reading +- Improve zlib.h documentation in many places +- Catch memory allocation failure in gz_open() +- Complete close operation if seek forward in gzclose_w() fails +- Return Z_ERRNO from gzclose_r() if close() fails +- Return Z_STREAM_ERROR instead of EOF for gzclose() being passed NULL +- Return zero for gzwrite() errors to match zlib.h description +- Return -1 on gzputs() error to match zlib.h description +- Add zconf.in.h to allow recovery from configure modification [Weigelt] +- Fix static library permissions in Makefile.in [Weigelt] +- Avoid warnings in configure tests that hide functionality [Weigelt] +- Add *BSD and DragonFly to Linux case in configure [gentoo 123571] +- Change libzdll.a to libz.dll.a in win32/Makefile.gcc [gentoo 288212] +- Avoid access of uninitialized data for first inflateReset2 call [Gomes] +- Keep object files in subdirectories to reduce the clutter somewhat +- Remove default Makefile and zlibdefs.h, add dummy Makefile +- Add new external functions to Z_PREFIX, remove duplicates, z_z_ -> z_ +- Remove zlibdefs.h completely -- modify zconf.h instead + +Changes in 1.2.3.6 (17 Jan 2010) +- Avoid void * arithmetic in gzread.c and gzwrite.c +- Make compilers happier with const char * for gz_error message +- Avoid unused parameter warning in inflate.c +- Avoid signed-unsigned comparison warning in inflate.c +- Indent #pragma's for traditional C +- Fix usage of strwinerror() in glib.c, change to gz_strwinerror() +- Correct email address in configure for system options +- Update make_vms.com and add make_vms.com to contrib/minizip [Zinser] +- Update zlib.map [Brown] +- Fix Makefile.in for Solaris 10 make of example64 and minizip64 [Torok] +- Apply various fixes to CMakeLists.txt [Lowman] +- Add checks on len in gzread() and gzwrite() +- Add error message for no more room for gzungetc() +- Remove zlib version check in gzwrite() +- Defer compression of gzprintf() result until need to +- Use snprintf() in gzdopen() if available +- Remove USE_MMAP configuration determination (only used by minigzip) +- Remove examples/pigz.c (available separately) +- Update examples/gun.c to 1.6 + +Changes in 1.2.3.5 (8 Jan 2010) +- Add space after #if in zutil.h for some compilers +- Fix relatively harmless bug in deflate_fast() [Exarevsky] +- Fix same problem in deflate_slow() +- Add $(SHAREDLIBV) to LIBS in Makefile.in [Brown] +- Add deflate_rle() for faster Z_RLE strategy run-length encoding +- Add deflate_huff() for faster Z_HUFFMAN_ONLY encoding +- Change name of "write" variable in inffast.c to avoid library collisions +- Fix premature EOF from gzread() in gzio.c [Brown] +- Use zlib header window size if windowBits is 0 in inflateInit2() +- Remove compressBound() call in deflate.c to avoid linking compress.o +- Replace use of errno in gz* with functions, support WinCE [Alves] +- Provide alternative to perror() in minigzip.c for WinCE [Alves] +- Don't use _vsnprintf on later versions of MSVC [Lowman] +- Add CMake build script and input file [Lowman] +- Update contrib/minizip to 1.1 [Svensson, Vollant] +- Moved nintendods directory from contrib to . +- Replace gzio.c with a new set of routines with the same functionality +- Add gzbuffer(), gzoffset(), gzclose_r(), gzclose_w() as part of above +- Update contrib/minizip to 1.1b +- Change gzeof() to return 0 on error instead of -1 to agree with zlib.h + +Changes in 1.2.3.4 (21 Dec 2009) +- Use old school .SUFFIXES in Makefile.in for FreeBSD compatibility +- Update comments in configure and Makefile.in for default --shared +- Fix test -z's in configure [Marquess] +- Build examplesh and minigzipsh when not testing +- Change NULL's to Z_NULL's in deflate.c and in comments in zlib.h +- Import LDFLAGS from the environment in configure +- Fix configure to populate SFLAGS with discovered CFLAGS options +- Adapt make_vms.com to the new Makefile.in [Zinser] +- Add zlib2ansi script for C++ compilation [Marquess] +- Add _FILE_OFFSET_BITS=64 test to make test (when applicable) +- Add AMD64 assembler code for longest match to contrib [Teterin] +- Include options from $SFLAGS when doing $LDSHARED +- Simplify 64-bit file support by introducing z_off64_t type +- Make shared object files in objs directory to work around old Sun cc +- Use only three-part version number for Darwin shared compiles +- Add rc option to ar in Makefile.in for when ./configure not run +- Add -WI,-rpath,. to LDFLAGS for OSF 1 V4* +- Set LD_LIBRARYN32_PATH for SGI IRIX shared compile +- Protect against _FILE_OFFSET_BITS being defined when compiling zlib +- Rename Makefile.in targets allstatic to static and allshared to shared +- Fix static and shared Makefile.in targets to be independent +- Correct error return bug in gz_open() by setting state [Brown] +- Put spaces before ;;'s in configure for better sh compatibility +- Add pigz.c (parallel implementation of gzip) to examples/ +- Correct constant in crc32.c to UL [Leventhal] +- Reject negative lengths in crc32_combine() +- Add inflateReset2() function to work like inflateEnd()/inflateInit2() +- Include sys/types.h for _LARGEFILE64_SOURCE [Brown] +- Correct typo in doc/algorithm.txt [Janik] +- Fix bug in adler32_combine() [Zhu] +- Catch missing-end-of-block-code error in all inflates and in puff + Assures that random input to inflate eventually results in an error +- Added enough.c (calculation of ENOUGH for inftrees.h) to examples/ +- Update ENOUGH and its usage to reflect discovered bounds +- Fix gzerror() error report on empty input file [Brown] +- Add ush casts in trees.c to avoid pedantic runtime errors +- Fix typo in zlib.h uncompress() description [Reiss] +- Correct inflate() comments with regard to automatic header detection +- Remove deprecation comment on Z_PARTIAL_FLUSH (it stays) +- Put new version of gzlog (2.0) in examples with interruption recovery +- Add puff compile option to permit invalid distance-too-far streams +- Add puff TEST command options, ability to read piped input +- Prototype the *64 functions in zlib.h when _FILE_OFFSET_BITS == 64, but + _LARGEFILE64_SOURCE not defined +- Fix Z_FULL_FLUSH to truly erase the past by resetting s->strstart +- Fix deflateSetDictionary() to use all 32K for output consistency +- Remove extraneous #define MIN_LOOKAHEAD in deflate.c (in deflate.h) +- Clear bytes after deflate lookahead to avoid use of uninitialized data +- Change a limit in inftrees.c to be more transparent to Coverity Prevent +- Update win32/zlib.def with exported symbols from zlib.h +- Correct spelling errors in zlib.h [Willem, Sobrado] +- Allow Z_BLOCK for deflate() to force a new block +- Allow negative bits in inflatePrime() to delete existing bit buffer +- Add Z_TREES flush option to inflate() to return at end of trees +- Add inflateMark() to return current state information for random access +- Add Makefile for NintendoDS to contrib [Costa] +- Add -w in configure compile tests to avoid spurious warnings [Beucler] +- Fix typos in zlib.h comments for deflateSetDictionary() +- Fix EOF detection in transparent gzread() [Maier] + +Changes in 1.2.3.3 (2 October 2006) +- Make --shared the default for configure, add a --static option +- Add compile option to permit invalid distance-too-far streams +- Add inflateUndermine() function which is required to enable above +- Remove use of "this" variable name for C++ compatibility [Marquess] +- Add testing of shared library in make test, if shared library built +- Use ftello() and fseeko() if available instead of ftell() and fseek() +- Provide two versions of all functions that use the z_off_t type for + binary compatibility -- a normal version and a 64-bit offset version, + per the Large File Support Extension when _LARGEFILE64_SOURCE is + defined; use the 64-bit versions by default when _FILE_OFFSET_BITS + is defined to be 64 +- Add a --uname= option to configure to perhaps help with cross-compiling + +Changes in 1.2.3.2 (3 September 2006) +- Turn off silly Borland warnings [Hay] +- Use off64_t and define _LARGEFILE64_SOURCE when present +- Fix missing dependency on inffixed.h in Makefile.in +- Rig configure --shared to build both shared and static [Teredesai, Truta] +- Remove zconf.in.h and instead create a new zlibdefs.h file +- Fix contrib/minizip/unzip.c non-encrypted after encrypted [Vollant] +- Add treebuild.xml (see http://treebuild.metux.de/) [Weigelt] + +Changes in 1.2.3.1 (16 August 2006) +- Add watcom directory with OpenWatcom make files [Daniel] +- Remove #undef of FAR in zconf.in.h for MVS [Fedtke] +- Update make_vms.com [Zinser] +- Use -fPIC for shared build in configure [Teredesai, Nicholson] +- Use only major version number for libz.so on IRIX and OSF1 [Reinholdtsen] +- Use fdopen() (not _fdopen()) for Interix in zutil.h [BŠck] +- Add some FAQ entries about the contrib directory +- Update the MVS question in the FAQ +- Avoid extraneous reads after EOF in gzio.c [Brown] +- Correct spelling of "successfully" in gzio.c [Randers-Pehrson] +- Add comments to zlib.h about gzerror() usage [Brown] +- Set extra flags in gzip header in gzopen() like deflate() does +- Make configure options more compatible with double-dash conventions + [Weigelt] +- Clean up compilation under Solaris SunStudio cc [Rowe, Reinholdtsen] +- Fix uninstall target in Makefile.in [Truta] +- Add pkgconfig support [Weigelt] +- Use $(DESTDIR) macro in Makefile.in [Reinholdtsen, Weigelt] +- Replace set_data_type() with a more accurate detect_data_type() in + trees.c, according to the txtvsbin.txt document [Truta] +- Swap the order of #include and #include "zlib.h" in + gzio.c, example.c and minigzip.c [Truta] +- Shut up annoying VS2005 warnings about standard C deprecation [Rowe, + Truta] (where?) +- Fix target "clean" from win32/Makefile.bor [Truta] +- Create .pdb and .manifest files in win32/makefile.msc [Ziegler, Rowe] +- Update zlib www home address in win32/DLL_FAQ.txt [Truta] +- Update contrib/masmx86/inffas32.asm for VS2005 [Vollant, Van Wassenhove] +- Enable browse info in the "Debug" and "ASM Debug" configurations in + the Visual C++ 6 project, and set (non-ASM) "Debug" as default [Truta] +- Add pkgconfig support [Weigelt] +- Add ZLIB_VER_MAJOR, ZLIB_VER_MINOR and ZLIB_VER_REVISION in zlib.h, + for use in win32/zlib1.rc [Polushin, Rowe, Truta] +- Add a document that explains the new text detection scheme to + doc/txtvsbin.txt [Truta] +- Add rfc1950.txt, rfc1951.txt and rfc1952.txt to doc/ [Truta] +- Move algorithm.txt into doc/ [Truta] +- Synchronize FAQ with website +- Fix compressBound(), was low for some pathological cases [Fearnley] +- Take into account wrapper variations in deflateBound() +- Set examples/zpipe.c input and output to binary mode for Windows +- Update examples/zlib_how.html with new zpipe.c (also web site) +- Fix some warnings in examples/gzlog.c and examples/zran.c (it seems + that gcc became pickier in 4.0) +- Add zlib.map for Linux: "All symbols from zlib-1.1.4 remain + un-versioned, the patch adds versioning only for symbols introduced in + zlib-1.2.0 or later. It also declares as local those symbols which are + not designed to be exported." [Levin] +- Update Z_PREFIX list in zconf.in.h, add --zprefix option to configure +- Do not initialize global static by default in trees.c, add a response + NO_INIT_GLOBAL_POINTERS to initialize them if needed [Marquess] +- Don't use strerror() in gzio.c under WinCE [Yakimov] +- Don't use errno.h in zutil.h under WinCE [Yakimov] +- Move arguments for AR to its usage to allow replacing ar [Marot] +- Add HAVE_VISIBILITY_PRAGMA in zconf.in.h for Mozilla [Randers-Pehrson] +- Improve inflateInit() and inflateInit2() documentation +- Fix structure size comment in inflate.h +- Change configure help option from --h* to --help [Santos] + +Changes in 1.2.3 (18 July 2005) +- Apply security vulnerability fixes to contrib/infback9 as well +- Clean up some text files (carriage returns, trailing space) +- Update testzlib, vstudio, masmx64, and masmx86 in contrib [Vollant] + +Changes in 1.2.2.4 (11 July 2005) +- Add inflatePrime() function for starting inflation at bit boundary +- Avoid some Visual C warnings in deflate.c +- Avoid more silly Visual C warnings in inflate.c and inftrees.c for 64-bit + compile +- Fix some spelling errors in comments [Betts] +- Correct inflateInit2() error return documentation in zlib.h +- Add zran.c example of compressed data random access to examples + directory, shows use of inflatePrime() +- Fix cast for assignments to strm->state in inflate.c and infback.c +- Fix zlibCompileFlags() in zutil.c to use 1L for long shifts [Oberhumer] +- Move declarations of gf2 functions to right place in crc32.c [Oberhumer] +- Add cast in trees.c t avoid a warning [Oberhumer] +- Avoid some warnings in fitblk.c, gun.c, gzjoin.c in examples [Oberhumer] +- Update make_vms.com [Zinser] +- Initialize state->write in inflateReset() since copied in inflate_fast() +- Be more strict on incomplete code sets in inflate_table() and increase + ENOUGH and MAXD -- this repairs a possible security vulnerability for + invalid inflate input. Thanks to Tavis Ormandy and Markus Oberhumer for + discovering the vulnerability and providing test cases. +- Add ia64 support to configure for HP-UX [Smith] +- Add error return to gzread() for format or i/o error [Levin] +- Use malloc.h for OS/2 [Necasek] + +Changes in 1.2.2.3 (27 May 2005) +- Replace 1U constants in inflate.c and inftrees.c for 64-bit compile +- Typecast fread() return values in gzio.c [Vollant] +- Remove trailing space in minigzip.c outmode (VC++ can't deal with it) +- Fix crc check bug in gzread() after gzungetc() [Heiner] +- Add the deflateTune() function to adjust internal compression parameters +- Add a fast gzip decompressor, gun.c, to examples (use of inflateBack) +- Remove an incorrect assertion in examples/zpipe.c +- Add C++ wrapper in infback9.h [Donais] +- Fix bug in inflateCopy() when decoding fixed codes +- Note in zlib.h how much deflateSetDictionary() actually uses +- Remove USE_DICT_HEAD in deflate.c (would mess up inflate if used) +- Add _WIN32_WCE to define WIN32 in zconf.in.h [Spencer] +- Don't include stderr.h or errno.h for _WIN32_WCE in zutil.h [Spencer] +- Add gzdirect() function to indicate transparent reads +- Update contrib/minizip [Vollant] +- Fix compilation of deflate.c when both ASMV and FASTEST [Oberhumer] +- Add casts in crc32.c to avoid warnings [Oberhumer] +- Add contrib/masmx64 [Vollant] +- Update contrib/asm586, asm686, masmx86, testzlib, vstudio [Vollant] + +Changes in 1.2.2.2 (30 December 2004) +- Replace structure assignments in deflate.c and inflate.c with zmemcpy to + avoid implicit memcpy calls (portability for no-library compilation) +- Increase sprintf() buffer size in gzdopen() to allow for large numbers +- Add INFLATE_STRICT to check distances against zlib header +- Improve WinCE errno handling and comments [Chang] +- Remove comment about no gzip header processing in FAQ +- Add Z_FIXED strategy option to deflateInit2() to force fixed trees +- Add updated make_vms.com [Coghlan], update README +- Create a new "examples" directory, move gzappend.c there, add zpipe.c, + fitblk.c, gzlog.[ch], gzjoin.c, and zlib_how.html. +- Add FAQ entry and comments in deflate.c on uninitialized memory access +- Add Solaris 9 make options in configure [Gilbert] +- Allow strerror() usage in gzio.c for STDC +- Fix DecompressBuf in contrib/delphi/ZLib.pas [ManChesTer] +- Update contrib/masmx86/inffas32.asm and gvmat32.asm [Vollant] +- Use z_off_t for adler32_combine() and crc32_combine() lengths +- Make adler32() much faster for small len +- Use OS_CODE in deflate() default gzip header + +Changes in 1.2.2.1 (31 October 2004) +- Allow inflateSetDictionary() call for raw inflate +- Fix inflate header crc check bug for file names and comments +- Add deflateSetHeader() and gz_header structure for custom gzip headers +- Add inflateGetheader() to retrieve gzip headers +- Add crc32_combine() and adler32_combine() functions +- Add alloc_func, free_func, in_func, out_func to Z_PREFIX list +- Use zstreamp consistently in zlib.h (inflate_back functions) +- Remove GUNZIP condition from definition of inflate_mode in inflate.h + and in contrib/inflate86/inffast.S [Truta, Anderson] +- Add support for AMD64 in contrib/inflate86/inffas86.c [Anderson] +- Update projects/README.projects and projects/visualc6 [Truta] +- Update win32/DLL_FAQ.txt [Truta] +- Avoid warning under NO_GZCOMPRESS in gzio.c; fix typo [Truta] +- Deprecate Z_ASCII; use Z_TEXT instead [Truta] +- Use a new algorithm for setting strm->data_type in trees.c [Truta] +- Do not define an exit() prototype in zutil.c unless DEBUG defined +- Remove prototype of exit() from zutil.c, example.c, minigzip.c [Truta] +- Add comment in zlib.h for Z_NO_FLUSH parameter to deflate() +- Fix Darwin build version identification [Peterson] + +Changes in 1.2.2 (3 October 2004) +- Update zlib.h comments on gzip in-memory processing +- Set adler to 1 in inflateReset() to support Java test suite [Walles] +- Add contrib/dotzlib [Ravn] +- Update win32/DLL_FAQ.txt [Truta] +- Update contrib/minizip [Vollant] +- Move contrib/visual-basic.txt to old/ [Truta] +- Fix assembler builds in projects/visualc6/ [Truta] + +Changes in 1.2.1.2 (9 September 2004) +- Update INDEX file +- Fix trees.c to update strm->data_type (no one ever noticed!) +- Fix bug in error case in inflate.c, infback.c, and infback9.c [Brown] +- Add "volatile" to crc table flag declaration (for DYNAMIC_CRC_TABLE) +- Add limited multitasking protection to DYNAMIC_CRC_TABLE +- Add NO_vsnprintf for VMS in zutil.h [Mozilla] +- Don't declare strerror() under VMS [Mozilla] +- Add comment to DYNAMIC_CRC_TABLE to use get_crc_table() to initialize +- Update contrib/ada [Anisimkov] +- Update contrib/minizip [Vollant] +- Fix configure to not hardcode directories for Darwin [Peterson] +- Fix gzio.c to not return error on empty files [Brown] +- Fix indentation; update version in contrib/delphi/ZLib.pas and + contrib/pascal/zlibpas.pas [Truta] +- Update mkasm.bat in contrib/masmx86 [Truta] +- Update contrib/untgz [Truta] +- Add projects/README.projects [Truta] +- Add project for MS Visual C++ 6.0 in projects/visualc6 [Cadieux, Truta] +- Update win32/DLL_FAQ.txt [Truta] +- Update list of Z_PREFIX symbols in zconf.h [Randers-Pehrson, Truta] +- Remove an unnecessary assignment to curr in inftrees.c [Truta] +- Add OS/2 to exe builds in configure [Poltorak] +- Remove err dummy parameter in zlib.h [Kientzle] + +Changes in 1.2.1.1 (9 January 2004) +- Update email address in README +- Several FAQ updates +- Fix a big fat bug in inftrees.c that prevented decoding valid + dynamic blocks with only literals and no distance codes -- + Thanks to "Hot Emu" for the bug report and sample file +- Add a note to puff.c on no distance codes case. + +Changes in 1.2.1 (17 November 2003) +- Remove a tab in contrib/gzappend/gzappend.c +- Update some interfaces in contrib for new zlib functions +- Update zlib version number in some contrib entries +- Add Windows CE definition for ptrdiff_t in zutil.h [Mai, Truta] +- Support shared libraries on Hurd and KFreeBSD [Brown] +- Fix error in NO_DIVIDE option of adler32.c + +Changes in 1.2.0.8 (4 November 2003) +- Update version in contrib/delphi/ZLib.pas and contrib/pascal/zlibpas.pas +- Add experimental NO_DIVIDE #define in adler32.c + - Possibly faster on some processors (let me know if it is) +- Correct Z_BLOCK to not return on first inflate call if no wrap +- Fix strm->data_type on inflate() return to correctly indicate EOB +- Add deflatePrime() function for appending in the middle of a byte +- Add contrib/gzappend for an example of appending to a stream +- Update win32/DLL_FAQ.txt [Truta] +- Delete Turbo C comment in README [Truta] +- Improve some indentation in zconf.h [Truta] +- Fix infinite loop on bad input in configure script [Church] +- Fix gzeof() for concatenated gzip files [Johnson] +- Add example to contrib/visual-basic.txt [Michael B.] +- Add -p to mkdir's in Makefile.in [vda] +- Fix configure to properly detect presence or lack of printf functions +- Add AS400 support [Monnerat] +- Add a little Cygwin support [Wilson] + +Changes in 1.2.0.7 (21 September 2003) +- Correct some debug formats in contrib/infback9 +- Cast a type in a debug statement in trees.c +- Change search and replace delimiter in configure from % to # [Beebe] +- Update contrib/untgz to 0.2 with various fixes [Truta] +- Add build support for Amiga [Nikl] +- Remove some directories in old that have been updated to 1.2 +- Add dylib building for Mac OS X in configure and Makefile.in +- Remove old distribution stuff from Makefile +- Update README to point to DLL_FAQ.txt, and add comment on Mac OS X +- Update links in README + +Changes in 1.2.0.6 (13 September 2003) +- Minor FAQ updates +- Update contrib/minizip to 1.00 [Vollant] +- Remove test of gz functions in example.c when GZ_COMPRESS defined [Truta] +- Update POSTINC comment for 68060 [Nikl] +- Add contrib/infback9 with deflate64 decoding (unsupported) +- For MVS define NO_vsnprintf and undefine FAR [van Burik] +- Add pragma for fdopen on MVS [van Burik] + +Changes in 1.2.0.5 (8 September 2003) +- Add OF to inflateBackEnd() declaration in zlib.h +- Remember start when using gzdopen in the middle of a file +- Use internal off_t counters in gz* functions to properly handle seeks +- Perform more rigorous check for distance-too-far in inffast.c +- Add Z_BLOCK flush option to return from inflate at block boundary +- Set strm->data_type on return from inflate + - Indicate bits unused, if at block boundary, and if in last block +- Replace size_t with ptrdiff_t in crc32.c, and check for correct size +- Add condition so old NO_DEFLATE define still works for compatibility +- FAQ update regarding the Windows DLL [Truta] +- INDEX update: add qnx entry, remove aix entry [Truta] +- Install zlib.3 into mandir [Wilson] +- Move contrib/zlib_dll_FAQ.txt to win32/DLL_FAQ.txt; update [Truta] +- Adapt the zlib interface to the new DLL convention guidelines [Truta] +- Introduce ZLIB_WINAPI macro to allow the export of functions using + the WINAPI calling convention, for Visual Basic [Vollant, Truta] +- Update msdos and win32 scripts and makefiles [Truta] +- Export symbols by name, not by ordinal, in win32/zlib.def [Truta] +- Add contrib/ada [Anisimkov] +- Move asm files from contrib/vstudio/vc70_32 to contrib/asm386 [Truta] +- Rename contrib/asm386 to contrib/masmx86 [Truta, Vollant] +- Add contrib/masm686 [Truta] +- Fix offsets in contrib/inflate86 and contrib/masmx86/inffas32.asm + [Truta, Vollant] +- Update contrib/delphi; rename to contrib/pascal; add example [Truta] +- Remove contrib/delphi2; add a new contrib/delphi [Truta] +- Avoid inclusion of the nonstandard in contrib/iostream, + and fix some method prototypes [Truta] +- Fix the ZCR_SEED2 constant to avoid warnings in contrib/minizip + [Truta] +- Avoid the use of backslash (\) in contrib/minizip [Vollant] +- Fix file time handling in contrib/untgz; update makefiles [Truta] +- Update contrib/vstudio/vc70_32 to comply with the new DLL guidelines + [Vollant] +- Remove contrib/vstudio/vc15_16 [Vollant] +- Rename contrib/vstudio/vc70_32 to contrib/vstudio/vc7 [Truta] +- Update README.contrib [Truta] +- Invert the assignment order of match_head and s->prev[...] in + INSERT_STRING [Truta] +- Compare TOO_FAR with 32767 instead of 32768, to avoid 16-bit warnings + [Truta] +- Compare function pointers with 0, not with NULL or Z_NULL [Truta] +- Fix prototype of syncsearch in inflate.c [Truta] +- Introduce ASMINF macro to be enabled when using an ASM implementation + of inflate_fast [Truta] +- Change NO_DEFLATE to NO_GZCOMPRESS [Truta] +- Modify test_gzio in example.c to take a single file name as a + parameter [Truta] +- Exit the example.c program if gzopen fails [Truta] +- Add type casts around strlen in example.c [Truta] +- Remove casting to sizeof in minigzip.c; give a proper type + to the variable compared with SUFFIX_LEN [Truta] +- Update definitions of STDC and STDC99 in zconf.h [Truta] +- Synchronize zconf.h with the new Windows DLL interface [Truta] +- Use SYS16BIT instead of __32BIT__ to distinguish between + 16- and 32-bit platforms [Truta] +- Use far memory allocators in small 16-bit memory models for + Turbo C [Truta] +- Add info about the use of ASMV, ASMINF and ZLIB_WINAPI in + zlibCompileFlags [Truta] +- Cygwin has vsnprintf [Wilson] +- In Windows16, OS_CODE is 0, as in MSDOS [Truta] +- In Cygwin, OS_CODE is 3 (Unix), not 11 (Windows32) [Wilson] + +Changes in 1.2.0.4 (10 August 2003) +- Minor FAQ updates +- Be more strict when checking inflateInit2's windowBits parameter +- Change NO_GUNZIP compile option to NO_GZIP to cover deflate as well +- Add gzip wrapper option to deflateInit2 using windowBits +- Add updated QNX rule in configure and qnx directory [Bonnefoy] +- Make inflate distance-too-far checks more rigorous +- Clean up FAR usage in inflate +- Add casting to sizeof() in gzio.c and minigzip.c + +Changes in 1.2.0.3 (19 July 2003) +- Fix silly error in gzungetc() implementation [Vollant] +- Update contrib/minizip and contrib/vstudio [Vollant] +- Fix printf format in example.c +- Correct cdecl support in zconf.in.h [Anisimkov] +- Minor FAQ updates + +Changes in 1.2.0.2 (13 July 2003) +- Add ZLIB_VERNUM in zlib.h for numerical preprocessor comparisons +- Attempt to avoid warnings in crc32.c for pointer-int conversion +- Add AIX to configure, remove aix directory [Bakker] +- Add some casts to minigzip.c +- Improve checking after insecure sprintf() or vsprintf() calls +- Remove #elif's from crc32.c +- Change leave label to inf_leave in inflate.c and infback.c to avoid + library conflicts +- Remove inflate gzip decoding by default--only enable gzip decoding by + special request for stricter backward compatibility +- Add zlibCompileFlags() function to return compilation information +- More typecasting in deflate.c to avoid warnings +- Remove leading underscore from _Capital #defines [Truta] +- Fix configure to link shared library when testing +- Add some Windows CE target adjustments [Mai] +- Remove #define ZLIB_DLL in zconf.h [Vollant] +- Add zlib.3 [Rodgers] +- Update RFC URL in deflate.c and algorithm.txt [Mai] +- Add zlib_dll_FAQ.txt to contrib [Truta] +- Add UL to some constants [Truta] +- Update minizip and vstudio [Vollant] +- Remove vestigial NEED_DUMMY_RETURN from zconf.in.h +- Expand use of NO_DUMMY_DECL to avoid all dummy structures +- Added iostream3 to contrib [Schwardt] +- Replace rewind() with fseek() for WinCE [Truta] +- Improve setting of zlib format compression level flags + - Report 0 for huffman and rle strategies and for level == 0 or 1 + - Report 2 only for level == 6 +- Only deal with 64K limit when necessary at compile time [Truta] +- Allow TOO_FAR check to be turned off at compile time [Truta] +- Add gzclearerr() function [Souza] +- Add gzungetc() function + +Changes in 1.2.0.1 (17 March 2003) +- Add Z_RLE strategy for run-length encoding [Truta] + - When Z_RLE requested, restrict matches to distance one + - Update zlib.h, minigzip.c, gzopen(), gzdopen() for Z_RLE +- Correct FASTEST compilation to allow level == 0 +- Clean up what gets compiled for FASTEST +- Incorporate changes to zconf.in.h [Vollant] + - Refine detection of Turbo C need for dummy returns + - Refine ZLIB_DLL compilation + - Include additional header file on VMS for off_t typedef +- Try to use _vsnprintf where it supplants vsprintf [Vollant] +- Add some casts in inffast.c +- Enchance comments in zlib.h on what happens if gzprintf() tries to + write more than 4095 bytes before compression +- Remove unused state from inflateBackEnd() +- Remove exit(0) from minigzip.c, example.c +- Get rid of all those darn tabs +- Add "check" target to Makefile.in that does the same thing as "test" +- Add "mostlyclean" and "maintainer-clean" targets to Makefile.in +- Update contrib/inflate86 [Anderson] +- Update contrib/testzlib, contrib/vstudio, contrib/minizip [Vollant] +- Add msdos and win32 directories with makefiles [Truta] +- More additions and improvements to the FAQ + +Changes in 1.2.0 (9 March 2003) +- New and improved inflate code + - About 20% faster + - Does not allocate 32K window unless and until needed + - Automatically detects and decompresses gzip streams + - Raw inflate no longer needs an extra dummy byte at end + - Added inflateBack functions using a callback interface--even faster + than inflate, useful for file utilities (gzip, zip) + - Added inflateCopy() function to record state for random access on + externally generated deflate streams (e.g. in gzip files) + - More readable code (I hope) +- New and improved crc32() + - About 50% faster, thanks to suggestions from Rodney Brown +- Add deflateBound() and compressBound() functions +- Fix memory leak in deflateInit2() +- Permit setting dictionary for raw deflate (for parallel deflate) +- Fix const declaration for gzwrite() +- Check for some malloc() failures in gzio.c +- Fix bug in gzopen() on single-byte file 0x1f +- Fix bug in gzread() on concatenated file with 0x1f at end of buffer + and next buffer doesn't start with 0x8b +- Fix uncompress() to return Z_DATA_ERROR on truncated input +- Free memory at end of example.c +- Remove MAX #define in trees.c (conflicted with some libraries) +- Fix static const's in deflate.c, gzio.c, and zutil.[ch] +- Declare malloc() and free() in gzio.c if STDC not defined +- Use malloc() instead of calloc() in zutil.c if int big enough +- Define STDC for AIX +- Add aix/ with approach for compiling shared library on AIX +- Add HP-UX support for shared libraries in configure +- Add OpenUNIX support for shared libraries in configure +- Use $cc instead of gcc to build shared library +- Make prefix directory if needed when installing +- Correct Macintosh avoidance of typedef Byte in zconf.h +- Correct Turbo C memory allocation when under Linux +- Use libz.a instead of -lz in Makefile (assure use of compiled library) +- Update configure to check for snprintf or vsnprintf functions and their + return value, warn during make if using an insecure function +- Fix configure problem with compile-time knowledge of HAVE_UNISTD_H that + is lost when library is used--resolution is to build new zconf.h +- Documentation improvements (in zlib.h): + - Document raw deflate and inflate + - Update RFCs URL + - Point out that zlib and gzip formats are different + - Note that Z_BUF_ERROR is not fatal + - Document string limit for gzprintf() and possible buffer overflow + - Note requirement on avail_out when flushing + - Note permitted values of flush parameter of inflate() +- Add some FAQs (and even answers) to the FAQ +- Add contrib/inflate86/ for x86 faster inflate +- Add contrib/blast/ for PKWare Data Compression Library decompression +- Add contrib/puff/ simple inflate for deflate format description + +Changes in 1.1.4 (11 March 2002) +- ZFREE was repeated on same allocation on some error conditions. + This creates a security problem described in + http://www.zlib.org/advisory-2002-03-11.txt +- Returned incorrect error (Z_MEM_ERROR) on some invalid data +- Avoid accesses before window for invalid distances with inflate window + less than 32K. +- force windowBits > 8 to avoid a bug in the encoder for a window size + of 256 bytes. (A complete fix will be available in 1.1.5). + +Changes in 1.1.3 (9 July 1998) +- fix "an inflate input buffer bug that shows up on rare but persistent + occasions" (Mark) +- fix gzread and gztell for concatenated .gz files (Didier Le Botlan) +- fix gzseek(..., SEEK_SET) in write mode +- fix crc check after a gzeek (Frank Faubert) +- fix miniunzip when the last entry in a zip file is itself a zip file + (J Lillge) +- add contrib/asm586 and contrib/asm686 (Brian Raiter) + See http://www.muppetlabs.com/~breadbox/software/assembly.html +- add support for Delphi 3 in contrib/delphi (Bob Dellaca) +- add support for C++Builder 3 and Delphi 3 in contrib/delphi2 (Davide Moretti) +- do not exit prematurely in untgz if 0 at start of block (Magnus Holmgren) +- use macro EXTERN instead of extern to support DLL for BeOS (Sander Stoks) +- added a FAQ file + +- Support gzdopen on Mac with Metrowerks (Jason Linhart) +- Do not redefine Byte on Mac (Brad Pettit & Jason Linhart) +- define SEEK_END too if SEEK_SET is not defined (Albert Chin-A-Young) +- avoid some warnings with Borland C (Tom Tanner) +- fix a problem in contrib/minizip/zip.c for 16-bit MSDOS (Gilles Vollant) +- emulate utime() for WIN32 in contrib/untgz (Gilles Vollant) +- allow several arguments to configure (Tim Mooney, Frodo Looijaard) +- use libdir and includedir in Makefile.in (Tim Mooney) +- support shared libraries on OSF1 V4 (Tim Mooney) +- remove so_locations in "make clean" (Tim Mooney) +- fix maketree.c compilation error (Glenn, Mark) +- Python interface to zlib now in Python 1.5 (Jeremy Hylton) +- new Makefile.riscos (Rich Walker) +- initialize static descriptors in trees.c for embedded targets (Nick Smith) +- use "foo-gz" in example.c for RISCOS and VMS (Nick Smith) +- add the OS/2 files in Makefile.in too (Andrew Zabolotny) +- fix fdopen and halloc macros for Microsoft C 6.0 (Tom Lane) +- fix maketree.c to allow clean compilation of inffixed.h (Mark) +- fix parameter check in deflateCopy (Gunther Nikl) +- cleanup trees.c, use compressed_len only in debug mode (Christian Spieler) +- Many portability patches by Christian Spieler: + . zutil.c, zutil.h: added "const" for zmem* + . Make_vms.com: fixed some typos + . Make_vms.com: msdos/Makefile.*: removed zutil.h from some dependency lists + . msdos/Makefile.msc: remove "default rtl link library" info from obj files + . msdos/Makefile.*: use model-dependent name for the built zlib library + . msdos/Makefile.emx, nt/Makefile.emx, nt/Makefile.gcc: + new makefiles, for emx (DOS/OS2), emx&rsxnt and mingw32 (Windows 9x / NT) +- use define instead of typedef for Bytef also for MSC small/medium (Tom Lane) +- replace __far with _far for better portability (Christian Spieler, Tom Lane) +- fix test for errno.h in configure (Tim Newsham) + +Changes in 1.1.2 (19 March 98) +- added contrib/minzip, mini zip and unzip based on zlib (Gilles Vollant) + See http://www.winimage.com/zLibDll/unzip.html +- preinitialize the inflate tables for fixed codes, to make the code + completely thread safe (Mark) +- some simplifications and slight speed-up to the inflate code (Mark) +- fix gzeof on non-compressed files (Allan Schrum) +- add -std1 option in configure for OSF1 to fix gzprintf (Martin Mokrejs) +- use default value of 4K for Z_BUFSIZE for 16-bit MSDOS (Tim Wegner + Glenn) +- added os2/Makefile.def and os2/zlib.def (Andrew Zabolotny) +- add shared lib support for UNIX_SV4.2MP (MATSUURA Takanori) +- do not wrap extern "C" around system includes (Tom Lane) +- mention zlib binding for TCL in README (Andreas Kupries) +- added amiga/Makefile.pup for Amiga powerUP SAS/C PPC (Andreas Kleinert) +- allow "make install prefix=..." even after configure (Glenn Randers-Pehrson) +- allow "configure --prefix $HOME" (Tim Mooney) +- remove warnings in example.c and gzio.c (Glenn Randers-Pehrson) +- move Makefile.sas to amiga/Makefile.sas + +Changes in 1.1.1 (27 Feb 98) +- fix macros _tr_tally_* in deflate.h for debug mode (Glenn Randers-Pehrson) +- remove block truncation heuristic which had very marginal effect for zlib + (smaller lit_bufsize than in gzip 1.2.4) and degraded a little the + compression ratio on some files. This also allows inlining _tr_tally for + matches in deflate_slow. +- added msdos/Makefile.w32 for WIN32 Microsoft Visual C++ (Bob Frazier) + +Changes in 1.1.0 (24 Feb 98) +- do not return STREAM_END prematurely in inflate (John Bowler) +- revert to the zlib 1.0.8 inflate to avoid the gcc 2.8.0 bug (Jeremy Buhler) +- compile with -DFASTEST to get compression code optimized for speed only +- in minigzip, try mmap'ing the input file first (Miguel Albrecht) +- increase size of I/O buffers in minigzip.c and gzio.c (not a big gain + on Sun but significant on HP) + +- add a pointer to experimental unzip library in README (Gilles Vollant) +- initialize variable gcc in configure (Chris Herborth) + +Changes in 1.0.9 (17 Feb 1998) +- added gzputs and gzgets functions +- do not clear eof flag in gzseek (Mark Diekhans) +- fix gzseek for files in transparent mode (Mark Diekhans) +- do not assume that vsprintf returns the number of bytes written (Jens Krinke) +- replace EXPORT with ZEXPORT to avoid conflict with other programs +- added compress2 in zconf.h, zlib.def, zlib.dnt +- new asm code from Gilles Vollant in contrib/asm386 +- simplify the inflate code (Mark): + . Replace ZALLOC's in huft_build() with single ZALLOC in inflate_blocks_new() + . ZALLOC the length list in inflate_trees_fixed() instead of using stack + . ZALLOC the value area for huft_build() instead of using stack + . Simplify Z_FINISH check in inflate() + +- Avoid gcc 2.8.0 comparison bug a little differently than zlib 1.0.8 +- in inftrees.c, avoid cc -O bug on HP (Farshid Elahi) +- in zconf.h move the ZLIB_DLL stuff earlier to avoid problems with + the declaration of FAR (Gilles VOllant) +- install libz.so* with mode 755 (executable) instead of 644 (Marc Lehmann) +- read_buf buf parameter of type Bytef* instead of charf* +- zmemcpy parameters are of type Bytef*, not charf* (Joseph Strout) +- do not redeclare unlink in minigzip.c for WIN32 (John Bowler) +- fix check for presence of directories in "make install" (Ian Willis) + +Changes in 1.0.8 (27 Jan 1998) +- fixed offsets in contrib/asm386/gvmat32.asm (Gilles Vollant) +- fix gzgetc and gzputc for big endian systems (Markus Oberhumer) +- added compress2() to allow setting the compression level +- include sys/types.h to get off_t on some systems (Marc Lehmann & QingLong) +- use constant arrays for the static trees in trees.c instead of computing + them at run time (thanks to Ken Raeburn for this suggestion). To create + trees.h, compile with GEN_TREES_H and run "make test". +- check return code of example in "make test" and display result +- pass minigzip command line options to file_compress +- simplifying code of inflateSync to avoid gcc 2.8 bug + +- support CC="gcc -Wall" in configure -s (QingLong) +- avoid a flush caused by ftell in gzopen for write mode (Ken Raeburn) +- fix test for shared library support to avoid compiler warnings +- zlib.lib -> zlib.dll in msdos/zlib.rc (Gilles Vollant) +- check for TARGET_OS_MAC in addition to MACOS (Brad Pettit) +- do not use fdopen for Metrowerks on Mac (Brad Pettit)) +- add checks for gzputc and gzputc in example.c +- avoid warnings in gzio.c and deflate.c (Andreas Kleinert) +- use const for the CRC table (Ken Raeburn) +- fixed "make uninstall" for shared libraries +- use Tracev instead of Trace in infblock.c +- in example.c use correct compressed length for test_sync +- suppress +vnocompatwarnings in configure for HPUX (not always supported) + +Changes in 1.0.7 (20 Jan 1998) +- fix gzseek which was broken in write mode +- return error for gzseek to negative absolute position +- fix configure for Linux (Chun-Chung Chen) +- increase stack space for MSC (Tim Wegner) +- get_crc_table and inflateSyncPoint are EXPORTed (Gilles Vollant) +- define EXPORTVA for gzprintf (Gilles Vollant) +- added man page zlib.3 (Rick Rodgers) +- for contrib/untgz, fix makedir() and improve Makefile + +- check gzseek in write mode in example.c +- allocate extra buffer for seeks only if gzseek is actually called +- avoid signed/unsigned comparisons (Tim Wegner, Gilles Vollant) +- add inflateSyncPoint in zconf.h +- fix list of exported functions in nt/zlib.dnt and mdsos/zlib.def + +Changes in 1.0.6 (19 Jan 1998) +- add functions gzprintf, gzputc, gzgetc, gztell, gzeof, gzseek, gzrewind and + gzsetparams (thanks to Roland Giersig and Kevin Ruland for some of this code) +- Fix a deflate bug occurring only with compression level 0 (thanks to + Andy Buckler for finding this one). +- In minigzip, pass transparently also the first byte for .Z files. +- return Z_BUF_ERROR instead of Z_OK if output buffer full in uncompress() +- check Z_FINISH in inflate (thanks to Marc Schluper) +- Implement deflateCopy (thanks to Adam Costello) +- make static libraries by default in configure, add --shared option. +- move MSDOS or Windows specific files to directory msdos +- suppress the notion of partial flush to simplify the interface + (but the symbol Z_PARTIAL_FLUSH is kept for compatibility with 1.0.4) +- suppress history buffer provided by application to simplify the interface + (this feature was not implemented anyway in 1.0.4) +- next_in and avail_in must be initialized before calling inflateInit or + inflateInit2 +- add EXPORT in all exported functions (for Windows DLL) +- added Makefile.nt (thanks to Stephen Williams) +- added the unsupported "contrib" directory: + contrib/asm386/ by Gilles Vollant + 386 asm code replacing longest_match(). + contrib/iostream/ by Kevin Ruland + A C++ I/O streams interface to the zlib gz* functions + contrib/iostream2/ by Tyge Løvset + Another C++ I/O streams interface + contrib/untgz/ by "Pedro A. Aranda Guti\irrez" + A very simple tar.gz file extractor using zlib + contrib/visual-basic.txt by Carlos Rios + How to use compress(), uncompress() and the gz* functions from VB. +- pass params -f (filtered data), -h (huffman only), -1 to -9 (compression + level) in minigzip (thanks to Tom Lane) + +- use const for rommable constants in deflate +- added test for gzseek and gztell in example.c +- add undocumented function inflateSyncPoint() (hack for Paul Mackerras) +- add undocumented function zError to convert error code to string + (for Tim Smithers) +- Allow compilation of gzio with -DNO_DEFLATE to avoid the compression code. +- Use default memcpy for Symantec MSDOS compiler. +- Add EXPORT keyword for check_func (needed for Windows DLL) +- add current directory to LD_LIBRARY_PATH for "make test" +- create also a link for libz.so.1 +- added support for FUJITSU UXP/DS (thanks to Toshiaki Nomura) +- use $(SHAREDLIB) instead of libz.so in Makefile.in (for HPUX) +- added -soname for Linux in configure (Chun-Chung Chen, +- assign numbers to the exported functions in zlib.def (for Windows DLL) +- add advice in zlib.h for best usage of deflateSetDictionary +- work around compiler bug on Atari (cast Z_NULL in call of s->checkfn) +- allow compilation with ANSI keywords only enabled for TurboC in large model +- avoid "versionString"[0] (Borland bug) +- add NEED_DUMMY_RETURN for Borland +- use variable z_verbose for tracing in debug mode (L. Peter Deutsch). +- allow compilation with CC +- defined STDC for OS/2 (David Charlap) +- limit external names to 8 chars for MVS (Thomas Lund) +- in minigzip.c, use static buffers only for 16-bit systems +- fix suffix check for "minigzip -d foo.gz" +- do not return an error for the 2nd of two consecutive gzflush() (Felix Lee) +- use _fdopen instead of fdopen for MSC >= 6.0 (Thomas Fanslau) +- added makelcc.bat for lcc-win32 (Tom St Denis) +- in Makefile.dj2, use copy and del instead of install and rm (Frank Donahoe) +- Avoid expanded $Id$. Use "rcs -kb" or "cvs admin -kb" to avoid Id expansion. +- check for unistd.h in configure (for off_t) +- remove useless check parameter in inflate_blocks_free +- avoid useless assignment of s->check to itself in inflate_blocks_new +- do not flush twice in gzclose (thanks to Ken Raeburn) +- rename FOPEN as F_OPEN to avoid clash with /usr/include/sys/file.h +- use NO_ERRNO_H instead of enumeration of operating systems with errno.h +- work around buggy fclose on pipes for HP/UX +- support zlib DLL with BORLAND C++ 5.0 (thanks to Glenn Randers-Pehrson) +- fix configure if CC is already equal to gcc + +Changes in 1.0.5 (3 Jan 98) +- Fix inflate to terminate gracefully when fed corrupted or invalid data +- Use const for rommable constants in inflate +- Eliminate memory leaks on error conditions in inflate +- Removed some vestigial code in inflate +- Update web address in README + +Changes in 1.0.4 (24 Jul 96) +- In very rare conditions, deflate(s, Z_FINISH) could fail to produce an EOF + bit, so the decompressor could decompress all the correct data but went + on to attempt decompressing extra garbage data. This affected minigzip too. +- zlibVersion and gzerror return const char* (needed for DLL) +- port to RISCOS (no fdopen, no multiple dots, no unlink, no fileno) +- use z_error only for DEBUG (avoid problem with DLLs) + +Changes in 1.0.3 (2 Jul 96) +- use z_streamp instead of z_stream *, which is now a far pointer in MSDOS + small and medium models; this makes the library incompatible with previous + versions for these models. (No effect in large model or on other systems.) +- return OK instead of BUF_ERROR if previous deflate call returned with + avail_out as zero but there is nothing to do +- added memcmp for non STDC compilers +- define NO_DUMMY_DECL for more Mac compilers (.h files merged incorrectly) +- define __32BIT__ if __386__ or i386 is defined (pb. with Watcom and SCO) +- better check for 16-bit mode MSC (avoids problem with Symantec) + +Changes in 1.0.2 (23 May 96) +- added Windows DLL support +- added a function zlibVersion (for the DLL support) +- fixed declarations using Bytef in infutil.c (pb with MSDOS medium model) +- Bytef is define's instead of typedef'd only for Borland C +- avoid reading uninitialized memory in example.c +- mention in README that the zlib format is now RFC1950 +- updated Makefile.dj2 +- added algorithm.doc + +Changes in 1.0.1 (20 May 96) [1.0 skipped to avoid confusion] +- fix array overlay in deflate.c which sometimes caused bad compressed data +- fix inflate bug with empty stored block +- fix MSDOS medium model which was broken in 0.99 +- fix deflateParams() which could generated bad compressed data. +- Bytef is define'd instead of typedef'ed (work around Borland bug) +- added an INDEX file +- new makefiles for DJGPP (Makefile.dj2), 32-bit Borland (Makefile.b32), + Watcom (Makefile.wat), Amiga SAS/C (Makefile.sas) +- speed up adler32 for modern machines without auto-increment +- added -ansi for IRIX in configure +- static_init_done in trees.c is an int +- define unlink as delete for VMS +- fix configure for QNX +- add configure branch for SCO and HPUX +- avoid many warnings (unused variables, dead assignments, etc...) +- no fdopen for BeOS +- fix the Watcom fix for 32 bit mode (define FAR as empty) +- removed redefinition of Byte for MKWERKS +- work around an MWKERKS bug (incorrect merge of all .h files) + +Changes in 0.99 (27 Jan 96) +- allow preset dictionary shared between compressor and decompressor +- allow compression level 0 (no compression) +- add deflateParams in zlib.h: allow dynamic change of compression level + and compression strategy. +- test large buffers and deflateParams in example.c +- add optional "configure" to build zlib as a shared library +- suppress Makefile.qnx, use configure instead +- fixed deflate for 64-bit systems (detected on Cray) +- fixed inflate_blocks for 64-bit systems (detected on Alpha) +- declare Z_DEFLATED in zlib.h (possible parameter for deflateInit2) +- always return Z_BUF_ERROR when deflate() has nothing to do +- deflateInit and inflateInit are now macros to allow version checking +- prefix all global functions and types with z_ with -DZ_PREFIX +- make falloc completely reentrant (inftrees.c) +- fixed very unlikely race condition in ct_static_init +- free in reverse order of allocation to help memory manager +- use zlib-1.0/* instead of zlib/* inside the tar.gz +- make zlib warning-free with "gcc -O3 -Wall -Wwrite-strings -Wpointer-arith + -Wconversion -Wstrict-prototypes -Wmissing-prototypes" +- allow gzread on concatenated .gz files +- deflateEnd now returns Z_DATA_ERROR if it was premature +- deflate is finally (?) fully deterministic (no matches beyond end of input) +- Document Z_SYNC_FLUSH +- add uninstall in Makefile +- Check for __cpluplus in zlib.h +- Better test in ct_align for partial flush +- avoid harmless warnings for Borland C++ +- initialize hash_head in deflate.c +- avoid warning on fdopen (gzio.c) for HP cc -Aa +- include stdlib.h for STDC compilers +- include errno.h for Cray +- ignore error if ranlib doesn't exist +- call ranlib twice for NeXTSTEP +- use exec_prefix instead of prefix for libz.a +- renamed ct_* as _tr_* to avoid conflict with applications +- clear z->msg in inflateInit2 before any error return +- initialize opaque in example.c, gzio.c, deflate.c and inflate.c +- fixed typo in zconf.h (_GNUC__ => __GNUC__) +- check for WIN32 in zconf.h and zutil.c (avoid farmalloc in 32-bit mode) +- fix typo in Make_vms.com (f$trnlnm -> f$getsyi) +- in fcalloc, normalize pointer if size > 65520 bytes +- don't use special fcalloc for 32 bit Borland C++ +- use STDC instead of __GO32__ to avoid redeclaring exit, calloc, etc... +- use Z_BINARY instead of BINARY +- document that gzclose after gzdopen will close the file +- allow "a" as mode in gzopen. +- fix error checking in gzread +- allow skipping .gz extra-field on pipes +- added reference to Perl interface in README +- put the crc table in FAR data (I dislike more and more the medium model :) +- added get_crc_table +- added a dimension to all arrays (Borland C can't count). +- workaround Borland C bug in declaration of inflate_codes_new & inflate_fast +- guard against multiple inclusion of *.h (for precompiled header on Mac) +- Watcom C pretends to be Microsoft C small model even in 32 bit mode. +- don't use unsized arrays to avoid silly warnings by Visual C++: + warning C4746: 'inflate_mask' : unsized array treated as '__far' + (what's wrong with far data in far model?). +- define enum out of inflate_blocks_state to allow compilation with C++ + +Changes in 0.95 (16 Aug 95) +- fix MSDOS small and medium model (now easier to adapt to any compiler) +- inlined send_bits +- fix the final (:-) bug for deflate with flush (output was correct but + not completely flushed in rare occasions). +- default window size is same for compression and decompression + (it's now sufficient to set MAX_WBITS in zconf.h). +- voidp -> voidpf and voidnp -> voidp (for consistency with other + typedefs and because voidnp was not near in large model). + +Changes in 0.94 (13 Aug 95) +- support MSDOS medium model +- fix deflate with flush (could sometimes generate bad output) +- fix deflateReset (zlib header was incorrectly suppressed) +- added support for VMS +- allow a compression level in gzopen() +- gzflush now calls fflush +- For deflate with flush, flush even if no more input is provided. +- rename libgz.a as libz.a +- avoid complex expression in infcodes.c triggering Turbo C bug +- work around a problem with gcc on Alpha (in INSERT_STRING) +- don't use inline functions (problem with some gcc versions) +- allow renaming of Byte, uInt, etc... with #define. +- avoid warning about (unused) pointer before start of array in deflate.c +- avoid various warnings in gzio.c, example.c, infblock.c, adler32.c, zutil.c +- avoid reserved word 'new' in trees.c + +Changes in 0.93 (25 June 95) +- temporarily disable inline functions +- make deflate deterministic +- give enough lookahead for PARTIAL_FLUSH +- Set binary mode for stdin/stdout in minigzip.c for OS/2 +- don't even use signed char in inflate (not portable enough) +- fix inflate memory leak for segmented architectures + +Changes in 0.92 (3 May 95) +- don't assume that char is signed (problem on SGI) +- Clear bit buffer when starting a stored block +- no memcpy on Pyramid +- suppressed inftest.c +- optimized fill_window, put longest_match inline for gcc +- optimized inflate on stored blocks. +- untabify all sources to simplify patches + +Changes in 0.91 (2 May 95) +- Default MEM_LEVEL is 8 (not 9 for Unix) as documented in zlib.h +- Document the memory requirements in zconf.h +- added "make install" +- fix sync search logic in inflateSync +- deflate(Z_FULL_FLUSH) now works even if output buffer too short +- after inflateSync, don't scare people with just "lo world" +- added support for DJGPP + +Changes in 0.9 (1 May 95) +- don't assume that zalloc clears the allocated memory (the TurboC bug + was Mark's bug after all :) +- let again gzread copy uncompressed data unchanged (was working in 0.71) +- deflate(Z_FULL_FLUSH), inflateReset and inflateSync are now fully implemented +- added a test of inflateSync in example.c +- moved MAX_WBITS to zconf.h because users might want to change that. +- document explicitly that zalloc(64K) on MSDOS must return a normalized + pointer (zero offset) +- added Makefiles for Microsoft C, Turbo C, Borland C++ +- faster crc32() + +Changes in 0.8 (29 April 95) +- added fast inflate (inffast.c) +- deflate(Z_FINISH) now returns Z_STREAM_END when done. Warning: this + is incompatible with previous versions of zlib which returned Z_OK. +- work around a TurboC compiler bug (bad code for b << 0, see infutil.h) + (actually that was not a compiler bug, see 0.81 above) +- gzread no longer reads one extra byte in certain cases +- In gzio destroy(), don't reference a freed structure +- avoid many warnings for MSDOS +- avoid the ERROR symbol which is used by MS Windows + +Changes in 0.71 (14 April 95) +- Fixed more MSDOS compilation problems :( There is still a bug with + TurboC large model. + +Changes in 0.7 (14 April 95) +- Added full inflate support. +- Simplified the crc32() interface. The pre- and post-conditioning + (one's complement) is now done inside crc32(). WARNING: this is + incompatible with previous versions; see zlib.h for the new usage. + +Changes in 0.61 (12 April 95) +- workaround for a bug in TurboC. example and minigzip now work on MSDOS. + +Changes in 0.6 (11 April 95) +- added minigzip.c +- added gzdopen to reopen a file descriptor as gzFile +- added transparent reading of non-gziped files in gzread. +- fixed bug in gzread (don't read crc as data) +- fixed bug in destroy (gzio.c) (don't return Z_STREAM_END for gzclose). +- don't allocate big arrays in the stack (for MSDOS) +- fix some MSDOS compilation problems + +Changes in 0.5: +- do real compression in deflate.c. Z_PARTIAL_FLUSH is supported but + not yet Z_FULL_FLUSH. +- support decompression but only in a single step (forced Z_FINISH) +- added opaque object for zalloc and zfree. +- added deflateReset and inflateReset +- added a variable zlib_version for consistency checking. +- renamed the 'filter' parameter of deflateInit2 as 'strategy'. + Added Z_FILTERED and Z_HUFFMAN_ONLY constants. + +Changes in 0.4: +- avoid "zip" everywhere, use zlib instead of ziplib. +- suppress Z_BLOCK_FLUSH, interpret Z_PARTIAL_FLUSH as block flush + if compression method == 8. +- added adler32 and crc32 +- renamed deflateOptions as deflateInit2, call one or the other but not both +- added the method parameter for deflateInit2. +- added inflateInit2 +- simplied considerably deflateInit and inflateInit by not supporting + user-provided history buffer. This is supported only in deflateInit2 + and inflateInit2. + +Changes in 0.3: +- prefix all macro names with Z_ +- use Z_FINISH instead of deflateEnd to finish compression. +- added Z_HUFFMAN_ONLY +- added gzerror() diff --git a/software/scsi2sd-util/zlib-1.2.8/FAQ b/software/scsi2sd-util/zlib-1.2.8/FAQ new file mode 100644 index 0000000..99b7cf9 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/FAQ @@ -0,0 +1,368 @@ + + Frequently Asked Questions about zlib + + +If your question is not there, please check the zlib home page +http://zlib.net/ which may have more recent information. +The lastest zlib FAQ is at http://zlib.net/zlib_faq.html + + + 1. Is zlib Y2K-compliant? + + Yes. zlib doesn't handle dates. + + 2. Where can I get a Windows DLL version? + + The zlib sources can be compiled without change to produce a DLL. See the + file win32/DLL_FAQ.txt in the zlib distribution. Pointers to the + precompiled DLL are found in the zlib web site at http://zlib.net/ . + + 3. Where can I get a Visual Basic interface to zlib? + + See + * http://marknelson.us/1997/01/01/zlib-engine/ + * win32/DLL_FAQ.txt in the zlib distribution + + 4. compress() returns Z_BUF_ERROR. + + Make sure that before the call of compress(), the length of the compressed + buffer is equal to the available size of the compressed buffer and not + zero. For Visual Basic, check that this parameter is passed by reference + ("as any"), not by value ("as long"). + + 5. deflate() or inflate() returns Z_BUF_ERROR. + + Before making the call, make sure that avail_in and avail_out are not zero. + When setting the parameter flush equal to Z_FINISH, also make sure that + avail_out is big enough to allow processing all pending input. Note that a + Z_BUF_ERROR is not fatal--another call to deflate() or inflate() can be + made with more input or output space. A Z_BUF_ERROR may in fact be + unavoidable depending on how the functions are used, since it is not + possible to tell whether or not there is more output pending when + strm.avail_out returns with zero. See http://zlib.net/zlib_how.html for a + heavily annotated example. + + 6. Where's the zlib documentation (man pages, etc.)? + + It's in zlib.h . Examples of zlib usage are in the files test/example.c + and test/minigzip.c, with more in examples/ . + + 7. Why don't you use GNU autoconf or libtool or ...? + + Because we would like to keep zlib as a very small and simple package. + zlib is rather portable and doesn't need much configuration. + + 8. I found a bug in zlib. + + Most of the time, such problems are due to an incorrect usage of zlib. + Please try to reproduce the problem with a small program and send the + corresponding source to us at zlib@gzip.org . Do not send multi-megabyte + data files without prior agreement. + + 9. Why do I get "undefined reference to gzputc"? + + If "make test" produces something like + + example.o(.text+0x154): undefined reference to `gzputc' + + check that you don't have old files libz.* in /usr/lib, /usr/local/lib or + /usr/X11R6/lib. Remove any old versions, then do "make install". + +10. I need a Delphi interface to zlib. + + See the contrib/delphi directory in the zlib distribution. + +11. Can zlib handle .zip archives? + + Not by itself, no. See the directory contrib/minizip in the zlib + distribution. + +12. Can zlib handle .Z files? + + No, sorry. You have to spawn an uncompress or gunzip subprocess, or adapt + the code of uncompress on your own. + +13. How can I make a Unix shared library? + + By default a shared (and a static) library is built for Unix. So: + + make distclean + ./configure + make + +14. How do I install a shared zlib library on Unix? + + After the above, then: + + make install + + However, many flavors of Unix come with a shared zlib already installed. + Before going to the trouble of compiling a shared version of zlib and + trying to install it, you may want to check if it's already there! If you + can #include , it's there. The -lz option will probably link to + it. You can check the version at the top of zlib.h or with the + ZLIB_VERSION symbol defined in zlib.h . + +15. I have a question about OttoPDF. + + We are not the authors of OttoPDF. The real author is on the OttoPDF web + site: Joel Hainley, jhainley@myndkryme.com. + +16. Can zlib decode Flate data in an Adobe PDF file? + + Yes. See http://www.pdflib.com/ . To modify PDF forms, see + http://sourceforge.net/projects/acroformtool/ . + +17. Why am I getting this "register_frame_info not found" error on Solaris? + + After installing zlib 1.1.4 on Solaris 2.6, running applications using zlib + generates an error such as: + + ld.so.1: rpm: fatal: relocation error: file /usr/local/lib/libz.so: + symbol __register_frame_info: referenced symbol not found + + The symbol __register_frame_info is not part of zlib, it is generated by + the C compiler (cc or gcc). You must recompile applications using zlib + which have this problem. This problem is specific to Solaris. See + http://www.sunfreeware.com for Solaris versions of zlib and applications + using zlib. + +18. Why does gzip give an error on a file I make with compress/deflate? + + The compress and deflate functions produce data in the zlib format, which + is different and incompatible with the gzip format. The gz* functions in + zlib on the other hand use the gzip format. Both the zlib and gzip formats + use the same compressed data format internally, but have different headers + and trailers around the compressed data. + +19. Ok, so why are there two different formats? + + The gzip format was designed to retain the directory information about a + single file, such as the name and last modification date. The zlib format + on the other hand was designed for in-memory and communication channel + applications, and has a much more compact header and trailer and uses a + faster integrity check than gzip. + +20. Well that's nice, but how do I make a gzip file in memory? + + You can request that deflate write the gzip format instead of the zlib + format using deflateInit2(). You can also request that inflate decode the + gzip format using inflateInit2(). Read zlib.h for more details. + +21. Is zlib thread-safe? + + Yes. However any library routines that zlib uses and any application- + provided memory allocation routines must also be thread-safe. zlib's gz* + functions use stdio library routines, and most of zlib's functions use the + library memory allocation routines by default. zlib's *Init* functions + allow for the application to provide custom memory allocation routines. + + Of course, you should only operate on any given zlib or gzip stream from a + single thread at a time. + +22. Can I use zlib in my commercial application? + + Yes. Please read the license in zlib.h. + +23. Is zlib under the GNU license? + + No. Please read the license in zlib.h. + +24. The license says that altered source versions must be "plainly marked". So + what exactly do I need to do to meet that requirement? + + You need to change the ZLIB_VERSION and ZLIB_VERNUM #defines in zlib.h. In + particular, the final version number needs to be changed to "f", and an + identification string should be appended to ZLIB_VERSION. Version numbers + x.x.x.f are reserved for modifications to zlib by others than the zlib + maintainers. For example, if the version of the base zlib you are altering + is "1.2.3.4", then in zlib.h you should change ZLIB_VERNUM to 0x123f, and + ZLIB_VERSION to something like "1.2.3.f-zachary-mods-v3". You can also + update the version strings in deflate.c and inftrees.c. + + For altered source distributions, you should also note the origin and + nature of the changes in zlib.h, as well as in ChangeLog and README, along + with the dates of the alterations. The origin should include at least your + name (or your company's name), and an email address to contact for help or + issues with the library. + + Note that distributing a compiled zlib library along with zlib.h and + zconf.h is also a source distribution, and so you should change + ZLIB_VERSION and ZLIB_VERNUM and note the origin and nature of the changes + in zlib.h as you would for a full source distribution. + +25. Will zlib work on a big-endian or little-endian architecture, and can I + exchange compressed data between them? + + Yes and yes. + +26. Will zlib work on a 64-bit machine? + + Yes. It has been tested on 64-bit machines, and has no dependence on any + data types being limited to 32-bits in length. If you have any + difficulties, please provide a complete problem report to zlib@gzip.org + +27. Will zlib decompress data from the PKWare Data Compression Library? + + No. The PKWare DCL uses a completely different compressed data format than + does PKZIP and zlib. However, you can look in zlib's contrib/blast + directory for a possible solution to your problem. + +28. Can I access data randomly in a compressed stream? + + No, not without some preparation. If when compressing you periodically use + Z_FULL_FLUSH, carefully write all the pending data at those points, and + keep an index of those locations, then you can start decompression at those + points. You have to be careful to not use Z_FULL_FLUSH too often, since it + can significantly degrade compression. Alternatively, you can scan a + deflate stream once to generate an index, and then use that index for + random access. See examples/zran.c . + +29. Does zlib work on MVS, OS/390, CICS, etc.? + + It has in the past, but we have not heard of any recent evidence. There + were working ports of zlib 1.1.4 to MVS, but those links no longer work. + If you know of recent, successful applications of zlib on these operating + systems, please let us know. Thanks. + +30. Is there some simpler, easier to read version of inflate I can look at to + understand the deflate format? + + First off, you should read RFC 1951. Second, yes. Look in zlib's + contrib/puff directory. + +31. Does zlib infringe on any patents? + + As far as we know, no. In fact, that was originally the whole point behind + zlib. Look here for some more information: + + http://www.gzip.org/#faq11 + +32. Can zlib work with greater than 4 GB of data? + + Yes. inflate() and deflate() will process any amount of data correctly. + Each call of inflate() or deflate() is limited to input and output chunks + of the maximum value that can be stored in the compiler's "unsigned int" + type, but there is no limit to the number of chunks. Note however that the + strm.total_in and strm_total_out counters may be limited to 4 GB. These + counters are provided as a convenience and are not used internally by + inflate() or deflate(). The application can easily set up its own counters + updated after each call of inflate() or deflate() to count beyond 4 GB. + compress() and uncompress() may be limited to 4 GB, since they operate in a + single call. gzseek() and gztell() may be limited to 4 GB depending on how + zlib is compiled. See the zlibCompileFlags() function in zlib.h. + + The word "may" appears several times above since there is a 4 GB limit only + if the compiler's "long" type is 32 bits. If the compiler's "long" type is + 64 bits, then the limit is 16 exabytes. + +33. Does zlib have any security vulnerabilities? + + The only one that we are aware of is potentially in gzprintf(). If zlib is + compiled to use sprintf() or vsprintf(), then there is no protection + against a buffer overflow of an 8K string space (or other value as set by + gzbuffer()), other than the caller of gzprintf() assuring that the output + will not exceed 8K. On the other hand, if zlib is compiled to use + snprintf() or vsnprintf(), which should normally be the case, then there is + no vulnerability. The ./configure script will display warnings if an + insecure variation of sprintf() will be used by gzprintf(). Also the + zlibCompileFlags() function will return information on what variant of + sprintf() is used by gzprintf(). + + If you don't have snprintf() or vsnprintf() and would like one, you can + find a portable implementation here: + + http://www.ijs.si/software/snprintf/ + + Note that you should be using the most recent version of zlib. Versions + 1.1.3 and before were subject to a double-free vulnerability, and versions + 1.2.1 and 1.2.2 were subject to an access exception when decompressing + invalid compressed data. + +34. Is there a Java version of zlib? + + Probably what you want is to use zlib in Java. zlib is already included + as part of the Java SDK in the java.util.zip package. If you really want + a version of zlib written in the Java language, look on the zlib home + page for links: http://zlib.net/ . + +35. I get this or that compiler or source-code scanner warning when I crank it + up to maximally-pedantic. Can't you guys write proper code? + + Many years ago, we gave up attempting to avoid warnings on every compiler + in the universe. It just got to be a waste of time, and some compilers + were downright silly as well as contradicted each other. So now, we simply + make sure that the code always works. + +36. Valgrind (or some similar memory access checker) says that deflate is + performing a conditional jump that depends on an uninitialized value. + Isn't that a bug? + + No. That is intentional for performance reasons, and the output of deflate + is not affected. This only started showing up recently since zlib 1.2.x + uses malloc() by default for allocations, whereas earlier versions used + calloc(), which zeros out the allocated memory. Even though the code was + correct, versions 1.2.4 and later was changed to not stimulate these + checkers. + +37. Will zlib read the (insert any ancient or arcane format here) compressed + data format? + + Probably not. Look in the comp.compression FAQ for pointers to various + formats and associated software. + +38. How can I encrypt/decrypt zip files with zlib? + + zlib doesn't support encryption. The original PKZIP encryption is very + weak and can be broken with freely available programs. To get strong + encryption, use GnuPG, http://www.gnupg.org/ , which already includes zlib + compression. For PKZIP compatible "encryption", look at + http://www.info-zip.org/ + +39. What's the difference between the "gzip" and "deflate" HTTP 1.1 encodings? + + "gzip" is the gzip format, and "deflate" is the zlib format. They should + probably have called the second one "zlib" instead to avoid confusion with + the raw deflate compressed data format. While the HTTP 1.1 RFC 2616 + correctly points to the zlib specification in RFC 1950 for the "deflate" + transfer encoding, there have been reports of servers and browsers that + incorrectly produce or expect raw deflate data per the deflate + specification in RFC 1951, most notably Microsoft. So even though the + "deflate" transfer encoding using the zlib format would be the more + efficient approach (and in fact exactly what the zlib format was designed + for), using the "gzip" transfer encoding is probably more reliable due to + an unfortunate choice of name on the part of the HTTP 1.1 authors. + + Bottom line: use the gzip format for HTTP 1.1 encoding. + +40. Does zlib support the new "Deflate64" format introduced by PKWare? + + No. PKWare has apparently decided to keep that format proprietary, since + they have not documented it as they have previous compression formats. In + any case, the compression improvements are so modest compared to other more + modern approaches, that it's not worth the effort to implement. + +41. I'm having a problem with the zip functions in zlib, can you help? + + There are no zip functions in zlib. You are probably using minizip by + Giles Vollant, which is found in the contrib directory of zlib. It is not + part of zlib. In fact none of the stuff in contrib is part of zlib. The + files in there are not supported by the zlib authors. You need to contact + the authors of the respective contribution for help. + +42. The match.asm code in contrib is under the GNU General Public License. + Since it's part of zlib, doesn't that mean that all of zlib falls under the + GNU GPL? + + No. The files in contrib are not part of zlib. They were contributed by + other authors and are provided as a convenience to the user within the zlib + distribution. Each item in contrib has its own license. + +43. Is zlib subject to export controls? What is its ECCN? + + zlib is not subject to export controls, and so is classified as EAR99. + +44. Can you please sign these lengthy legal documents and fax them back to us + so that we can use your software in our product? + + No. Go away. Shoo. diff --git a/software/scsi2sd-util/zlib-1.2.8/INDEX b/software/scsi2sd-util/zlib-1.2.8/INDEX new file mode 100644 index 0000000..2ba0641 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/INDEX @@ -0,0 +1,68 @@ +CMakeLists.txt cmake build file +ChangeLog history of changes +FAQ Frequently Asked Questions about zlib +INDEX this file +Makefile dummy Makefile that tells you to ./configure +Makefile.in template for Unix Makefile +README guess what +configure configure script for Unix +make_vms.com makefile for VMS +test/example.c zlib usages examples for build testing +test/minigzip.c minimal gzip-like functionality for build testing +test/infcover.c inf*.c code coverage for build coverage testing +treebuild.xml XML description of source file dependencies +zconf.h.cmakein zconf.h template for cmake +zconf.h.in zconf.h template for configure +zlib.3 Man page for zlib +zlib.3.pdf Man page in PDF format +zlib.map Linux symbol information +zlib.pc.in Template for pkg-config descriptor +zlib.pc.cmakein zlib.pc template for cmake +zlib2ansi perl script to convert source files for C++ compilation + +amiga/ makefiles for Amiga SAS C +as400/ makefiles for AS/400 +doc/ documentation for formats and algorithms +msdos/ makefiles for MSDOS +nintendods/ makefile for Nintendo DS +old/ makefiles for various architectures and zlib documentation + files that have not yet been updated for zlib 1.2.x +qnx/ makefiles for QNX +watcom/ makefiles for OpenWatcom +win32/ makefiles for Windows + + zlib public header files (required for library use): +zconf.h +zlib.h + + private source files used to build the zlib library: +adler32.c +compress.c +crc32.c +crc32.h +deflate.c +deflate.h +gzclose.c +gzguts.h +gzlib.c +gzread.c +gzwrite.c +infback.c +inffast.c +inffast.h +inffixed.h +inflate.c +inflate.h +inftrees.c +inftrees.h +trees.c +trees.h +uncompr.c +zutil.c +zutil.h + + source files for sample programs +See examples/README.examples + + unsupported contributions by third parties +See contrib/README.contrib diff --git a/software/scsi2sd-util/zlib-1.2.8/Makefile b/software/scsi2sd-util/zlib-1.2.8/Makefile new file mode 100644 index 0000000..6bba86c --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/Makefile @@ -0,0 +1,5 @@ +all: + -@echo "Please use ./configure first. Thank you." + +distclean: + make -f Makefile.in distclean diff --git a/software/scsi2sd-util/zlib-1.2.8/Makefile.in b/software/scsi2sd-util/zlib-1.2.8/Makefile.in new file mode 100644 index 0000000..c61aa30 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/Makefile.in @@ -0,0 +1,288 @@ +# Makefile for zlib +# Copyright (C) 1995-2013 Jean-loup Gailly, Mark Adler +# For conditions of distribution and use, see copyright notice in zlib.h + +# To compile and test, type: +# ./configure; make test +# Normally configure builds both a static and a shared library. +# If you want to build just a static library, use: ./configure --static + +# To use the asm code, type: +# cp contrib/asm?86/match.S ./match.S +# make LOC=-DASMV OBJA=match.o + +# To install /usr/local/lib/libz.* and /usr/local/include/zlib.h, type: +# make install +# To install in $HOME instead of /usr/local, use: +# make install prefix=$HOME + +CC=cc + +CFLAGS=-O +#CFLAGS=-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7 +#CFLAGS=-g -DDEBUG +#CFLAGS=-O3 -Wall -Wwrite-strings -Wpointer-arith -Wconversion \ +# -Wstrict-prototypes -Wmissing-prototypes + +SFLAGS=-O +LDFLAGS= +TEST_LDFLAGS=-L. libz.a +LDSHARED=$(CC) +CPP=$(CC) -E + +STATICLIB=libz.a +SHAREDLIB=libz.so +SHAREDLIBV=libz.so.1.2.8 +SHAREDLIBM=libz.so.1 +LIBS=$(STATICLIB) $(SHAREDLIBV) + +AR=ar +ARFLAGS=rc +RANLIB=ranlib +LDCONFIG=ldconfig +LDSHAREDLIBC=-lc +TAR=tar +SHELL=/bin/sh +EXE= + +prefix = /usr/local +exec_prefix = ${prefix} +libdir = ${exec_prefix}/lib +sharedlibdir = ${libdir} +includedir = ${prefix}/include +mandir = ${prefix}/share/man +man3dir = ${mandir}/man3 +pkgconfigdir = ${libdir}/pkgconfig + +OBJZ = adler32.o crc32.o deflate.o infback.o inffast.o inflate.o inftrees.o trees.o zutil.o +OBJG = compress.o uncompr.o gzclose.o gzlib.o gzread.o gzwrite.o +OBJC = $(OBJZ) $(OBJG) + +PIC_OBJZ = adler32.lo crc32.lo deflate.lo infback.lo inffast.lo inflate.lo inftrees.lo trees.lo zutil.lo +PIC_OBJG = compress.lo uncompr.lo gzclose.lo gzlib.lo gzread.lo gzwrite.lo +PIC_OBJC = $(PIC_OBJZ) $(PIC_OBJG) + +# to use the asm code: make OBJA=match.o, PIC_OBJA=match.lo +OBJA = +PIC_OBJA = + +OBJS = $(OBJC) $(OBJA) + +PIC_OBJS = $(PIC_OBJC) $(PIC_OBJA) + +all: static shared + +static: example$(EXE) minigzip$(EXE) + +shared: examplesh$(EXE) minigzipsh$(EXE) + +all64: example64$(EXE) minigzip64$(EXE) + +check: test + +test: all teststatic testshared + +teststatic: static + @TMPST=tmpst_$$; \ + if echo hello world | ./minigzip | ./minigzip -d && ./example $$TMPST ; then \ + echo ' *** zlib test OK ***'; \ + else \ + echo ' *** zlib test FAILED ***'; false; \ + fi; \ + rm -f $$TMPST + +testshared: shared + @LD_LIBRARY_PATH=`pwd`:$(LD_LIBRARY_PATH) ; export LD_LIBRARY_PATH; \ + LD_LIBRARYN32_PATH=`pwd`:$(LD_LIBRARYN32_PATH) ; export LD_LIBRARYN32_PATH; \ + DYLD_LIBRARY_PATH=`pwd`:$(DYLD_LIBRARY_PATH) ; export DYLD_LIBRARY_PATH; \ + SHLIB_PATH=`pwd`:$(SHLIB_PATH) ; export SHLIB_PATH; \ + TMPSH=tmpsh_$$; \ + if echo hello world | ./minigzipsh | ./minigzipsh -d && ./examplesh $$TMPSH; then \ + echo ' *** zlib shared test OK ***'; \ + else \ + echo ' *** zlib shared test FAILED ***'; false; \ + fi; \ + rm -f $$TMPSH + +test64: all64 + @TMP64=tmp64_$$; \ + if echo hello world | ./minigzip64 | ./minigzip64 -d && ./example64 $$TMP64; then \ + echo ' *** zlib 64-bit test OK ***'; \ + else \ + echo ' *** zlib 64-bit test FAILED ***'; false; \ + fi; \ + rm -f $$TMP64 + +infcover.o: test/infcover.c zlib.h zconf.h + $(CC) $(CFLAGS) -I. -c -o $@ test/infcover.c + +infcover: infcover.o libz.a + $(CC) $(CFLAGS) -o $@ infcover.o libz.a + +cover: infcover + rm -f *.gcda + ./infcover + gcov inf*.c + +libz.a: $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + -@ ($(RANLIB) $@ || true) >/dev/null 2>&1 + +match.o: match.S + $(CPP) match.S > _match.s + $(CC) -c _match.s + mv _match.o match.o + rm -f _match.s + +match.lo: match.S + $(CPP) match.S > _match.s + $(CC) -c -fPIC _match.s + mv _match.o match.lo + rm -f _match.s + +example.o: test/example.c zlib.h zconf.h + $(CC) $(CFLAGS) -I. -c -o $@ test/example.c + +minigzip.o: test/minigzip.c zlib.h zconf.h + $(CC) $(CFLAGS) -I. -c -o $@ test/minigzip.c + +example64.o: test/example.c zlib.h zconf.h + $(CC) $(CFLAGS) -I. -D_FILE_OFFSET_BITS=64 -c -o $@ test/example.c + +minigzip64.o: test/minigzip.c zlib.h zconf.h + $(CC) $(CFLAGS) -I. -D_FILE_OFFSET_BITS=64 -c -o $@ test/minigzip.c + +.SUFFIXES: .lo + +.c.lo: + -@mkdir objs 2>/dev/null || test -d objs + $(CC) $(SFLAGS) -DPIC -c -o objs/$*.o $< + -@mv objs/$*.o $@ + +placebo $(SHAREDLIBV): $(PIC_OBJS) libz.a + $(LDSHARED) $(SFLAGS) -o $@ $(PIC_OBJS) $(LDSHAREDLIBC) $(LDFLAGS) + rm -f $(SHAREDLIB) $(SHAREDLIBM) + ln -s $@ $(SHAREDLIB) + ln -s $@ $(SHAREDLIBM) + -@rmdir objs + +example$(EXE): example.o $(STATICLIB) + $(CC) $(CFLAGS) -o $@ example.o $(TEST_LDFLAGS) + +minigzip$(EXE): minigzip.o $(STATICLIB) + $(CC) $(CFLAGS) -o $@ minigzip.o $(TEST_LDFLAGS) + +examplesh$(EXE): example.o $(SHAREDLIBV) + $(CC) $(CFLAGS) -o $@ example.o -L. $(SHAREDLIBV) + +minigzipsh$(EXE): minigzip.o $(SHAREDLIBV) + $(CC) $(CFLAGS) -o $@ minigzip.o -L. $(SHAREDLIBV) + +example64$(EXE): example64.o $(STATICLIB) + $(CC) $(CFLAGS) -o $@ example64.o $(TEST_LDFLAGS) + +minigzip64$(EXE): minigzip64.o $(STATICLIB) + $(CC) $(CFLAGS) -o $@ minigzip64.o $(TEST_LDFLAGS) + +install-libs: $(LIBS) + -@if [ ! -d $(DESTDIR)$(exec_prefix) ]; then mkdir -p $(DESTDIR)$(exec_prefix); fi + -@if [ ! -d $(DESTDIR)$(libdir) ]; then mkdir -p $(DESTDIR)$(libdir); fi + -@if [ ! -d $(DESTDIR)$(sharedlibdir) ]; then mkdir -p $(DESTDIR)$(sharedlibdir); fi + -@if [ ! -d $(DESTDIR)$(man3dir) ]; then mkdir -p $(DESTDIR)$(man3dir); fi + -@if [ ! -d $(DESTDIR)$(pkgconfigdir) ]; then mkdir -p $(DESTDIR)$(pkgconfigdir); fi + cp $(STATICLIB) $(DESTDIR)$(libdir) + chmod 644 $(DESTDIR)$(libdir)/$(STATICLIB) + -@($(RANLIB) $(DESTDIR)$(libdir)/libz.a || true) >/dev/null 2>&1 + -@if test -n "$(SHAREDLIBV)"; then \ + cp $(SHAREDLIBV) $(DESTDIR)$(sharedlibdir); \ + echo "cp $(SHAREDLIBV) $(DESTDIR)$(sharedlibdir)"; \ + chmod 755 $(DESTDIR)$(sharedlibdir)/$(SHAREDLIBV); \ + echo "chmod 755 $(DESTDIR)$(sharedlibdir)/$(SHAREDLIBV)"; \ + rm -f $(DESTDIR)$(sharedlibdir)/$(SHAREDLIB) $(DESTDIR)$(sharedlibdir)/$(SHAREDLIBM); \ + ln -s $(SHAREDLIBV) $(DESTDIR)$(sharedlibdir)/$(SHAREDLIB); \ + ln -s $(SHAREDLIBV) $(DESTDIR)$(sharedlibdir)/$(SHAREDLIBM); \ + ($(LDCONFIG) || true) >/dev/null 2>&1; \ + fi + cp zlib.3 $(DESTDIR)$(man3dir) + chmod 644 $(DESTDIR)$(man3dir)/zlib.3 + cp zlib.pc $(DESTDIR)$(pkgconfigdir) + chmod 644 $(DESTDIR)$(pkgconfigdir)/zlib.pc +# The ranlib in install is needed on NeXTSTEP which checks file times +# ldconfig is for Linux + +install: install-libs + -@if [ ! -d $(DESTDIR)$(includedir) ]; then mkdir -p $(DESTDIR)$(includedir); fi + cp zlib.h zconf.h $(DESTDIR)$(includedir) + chmod 644 $(DESTDIR)$(includedir)/zlib.h $(DESTDIR)$(includedir)/zconf.h + +uninstall: + cd $(DESTDIR)$(includedir) && rm -f zlib.h zconf.h + cd $(DESTDIR)$(libdir) && rm -f libz.a; \ + if test -n "$(SHAREDLIBV)" -a -f $(SHAREDLIBV); then \ + rm -f $(SHAREDLIBV) $(SHAREDLIB) $(SHAREDLIBM); \ + fi + cd $(DESTDIR)$(man3dir) && rm -f zlib.3 + cd $(DESTDIR)$(pkgconfigdir) && rm -f zlib.pc + +docs: zlib.3.pdf + +zlib.3.pdf: zlib.3 + groff -mandoc -f H -T ps zlib.3 | ps2pdf - zlib.3.pdf + +zconf.h.cmakein: zconf.h.in + -@ TEMPFILE=zconfh_$$; \ + echo "/#define ZCONF_H/ a\\\\\n#cmakedefine Z_PREFIX\\\\\n#cmakedefine Z_HAVE_UNISTD_H\n" >> $$TEMPFILE &&\ + sed -f $$TEMPFILE zconf.h.in > zconf.h.cmakein &&\ + touch -r zconf.h.in zconf.h.cmakein &&\ + rm $$TEMPFILE + +zconf: zconf.h.in + cp -p zconf.h.in zconf.h + +mostlyclean: clean +clean: + rm -f *.o *.lo *~ \ + example$(EXE) minigzip$(EXE) examplesh$(EXE) minigzipsh$(EXE) \ + example64$(EXE) minigzip64$(EXE) \ + infcover \ + libz.* foo.gz so_locations \ + _match.s maketree contrib/infback9/*.o + rm -rf objs + rm -f *.gcda *.gcno *.gcov + rm -f contrib/infback9/*.gcda contrib/infback9/*.gcno contrib/infback9/*.gcov + +maintainer-clean: distclean +distclean: clean zconf zconf.h.cmakein docs + rm -f Makefile zlib.pc configure.log + -@rm -f .DS_Store + -@printf 'all:\n\t-@echo "Please use ./configure first. Thank you."\n' > Makefile + -@printf '\ndistclean:\n\tmake -f Makefile.in distclean\n' >> Makefile + -@touch -r Makefile.in Makefile + +tags: + etags *.[ch] + +depend: + makedepend -- $(CFLAGS) -- *.[ch] + +# DO NOT DELETE THIS LINE -- make depend depends on it. + +adler32.o zutil.o: zutil.h zlib.h zconf.h +gzclose.o gzlib.o gzread.o gzwrite.o: zlib.h zconf.h gzguts.h +compress.o example.o minigzip.o uncompr.o: zlib.h zconf.h +crc32.o: zutil.h zlib.h zconf.h crc32.h +deflate.o: deflate.h zutil.h zlib.h zconf.h +infback.o inflate.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h inffixed.h +inffast.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h +inftrees.o: zutil.h zlib.h zconf.h inftrees.h +trees.o: deflate.h zutil.h zlib.h zconf.h trees.h + +adler32.lo zutil.lo: zutil.h zlib.h zconf.h +gzclose.lo gzlib.lo gzread.lo gzwrite.lo: zlib.h zconf.h gzguts.h +compress.lo example.lo minigzip.lo uncompr.lo: zlib.h zconf.h +crc32.lo: zutil.h zlib.h zconf.h crc32.h +deflate.lo: deflate.h zutil.h zlib.h zconf.h +infback.lo inflate.lo: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h inffixed.h +inffast.lo: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h +inftrees.lo: zutil.h zlib.h zconf.h inftrees.h +trees.lo: deflate.h zutil.h zlib.h zconf.h trees.h diff --git a/software/scsi2sd-util/zlib-1.2.8/README b/software/scsi2sd-util/zlib-1.2.8/README new file mode 100644 index 0000000..5ca9d12 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/README @@ -0,0 +1,115 @@ +ZLIB DATA COMPRESSION LIBRARY + +zlib 1.2.8 is a general purpose data compression library. All the code is +thread safe. The data format used by the zlib library is described by RFCs +(Request for Comments) 1950 to 1952 in the files +http://tools.ietf.org/html/rfc1950 (zlib format), rfc1951 (deflate format) and +rfc1952 (gzip format). + +All functions of the compression library are documented in the file zlib.h +(volunteer to write man pages welcome, contact zlib@gzip.org). A usage example +of the library is given in the file test/example.c which also tests that +the library is working correctly. Another example is given in the file +test/minigzip.c. The compression library itself is composed of all source +files in the root directory. + +To compile all files and run the test program, follow the instructions given at +the top of Makefile.in. In short "./configure; make test", and if that goes +well, "make install" should work for most flavors of Unix. For Windows, use +one of the special makefiles in win32/ or contrib/vstudio/ . For VMS, use +make_vms.com. + +Questions about zlib should be sent to , or to Gilles Vollant + for the Windows DLL version. The zlib home page is +http://zlib.net/ . Before reporting a problem, please check this site to +verify that you have the latest version of zlib; otherwise get the latest +version and check whether the problem still exists or not. + +PLEASE read the zlib FAQ http://zlib.net/zlib_faq.html before asking for help. + +Mark Nelson wrote an article about zlib for the Jan. 1997 +issue of Dr. Dobb's Journal; a copy of the article is available at +http://marknelson.us/1997/01/01/zlib-engine/ . + +The changes made in version 1.2.8 are documented in the file ChangeLog. + +Unsupported third party contributions are provided in directory contrib/ . + +zlib is available in Java using the java.util.zip package, documented at +http://java.sun.com/developer/technicalArticles/Programming/compression/ . + +A Perl interface to zlib written by Paul Marquess is available +at CPAN (Comprehensive Perl Archive Network) sites, including +http://search.cpan.org/~pmqs/IO-Compress-Zlib/ . + +A Python interface to zlib written by A.M. Kuchling is +available in Python 1.5 and later versions, see +http://docs.python.org/library/zlib.html . + +zlib is built into tcl: http://wiki.tcl.tk/4610 . + +An experimental package to read and write files in .zip format, written on top +of zlib by Gilles Vollant , is available in the +contrib/minizip directory of zlib. + + +Notes for some targets: + +- For Windows DLL versions, please see win32/DLL_FAQ.txt + +- For 64-bit Irix, deflate.c must be compiled without any optimization. With + -O, one libpng test fails. The test works in 32 bit mode (with the -n32 + compiler flag). The compiler bug has been reported to SGI. + +- zlib doesn't work with gcc 2.6.3 on a DEC 3000/300LX under OSF/1 2.1 it works + when compiled with cc. + +- On Digital Unix 4.0D (formely OSF/1) on AlphaServer, the cc option -std1 is + necessary to get gzprintf working correctly. This is done by configure. + +- zlib doesn't work on HP-UX 9.05 with some versions of /bin/cc. It works with + other compilers. Use "make test" to check your compiler. + +- gzdopen is not supported on RISCOS or BEOS. + +- For PalmOs, see http://palmzlib.sourceforge.net/ + + +Acknowledgments: + + The deflate format used by zlib was defined by Phil Katz. The deflate and + zlib specifications were written by L. Peter Deutsch. Thanks to all the + people who reported problems and suggested various improvements in zlib; they + are too numerous to cite here. + +Copyright notice: + + (C) 1995-2013 Jean-loup Gailly and Mark Adler + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. + + Jean-loup Gailly Mark Adler + jloup@gzip.org madler@alumni.caltech.edu + +If you use the zlib library in a product, we would appreciate *not* receiving +lengthy legal documents to sign. The sources are provided for free but without +warranty of any kind. The library has been entirely written by Jean-loup +Gailly and Mark Adler; it does not include third-party code. + +If you redistribute modified sources, we would appreciate that you include in +the file ChangeLog history information documenting your changes. Please read +the FAQ for more information on the distribution of modified source versions. diff --git a/software/scsi2sd-util/zlib-1.2.8/adler32.c b/software/scsi2sd-util/zlib-1.2.8/adler32.c new file mode 100644 index 0000000..a868f07 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/adler32.c @@ -0,0 +1,179 @@ +/* adler32.c -- compute the Adler-32 checksum of a data stream + * Copyright (C) 1995-2011 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* @(#) $Id$ */ + +#include "zutil.h" + +#define local static + +local uLong adler32_combine_ OF((uLong adler1, uLong adler2, z_off64_t len2)); + +#define BASE 65521 /* largest prime smaller than 65536 */ +#define NMAX 5552 +/* NMAX is the largest n such that 255n(n+1)/2 + (n+1)(BASE-1) <= 2^32-1 */ + +#define DO1(buf,i) {adler += (buf)[i]; sum2 += adler;} +#define DO2(buf,i) DO1(buf,i); DO1(buf,i+1); +#define DO4(buf,i) DO2(buf,i); DO2(buf,i+2); +#define DO8(buf,i) DO4(buf,i); DO4(buf,i+4); +#define DO16(buf) DO8(buf,0); DO8(buf,8); + +/* use NO_DIVIDE if your processor does not do division in hardware -- + try it both ways to see which is faster */ +#ifdef NO_DIVIDE +/* note that this assumes BASE is 65521, where 65536 % 65521 == 15 + (thank you to John Reiser for pointing this out) */ +# define CHOP(a) \ + do { \ + unsigned long tmp = a >> 16; \ + a &= 0xffffUL; \ + a += (tmp << 4) - tmp; \ + } while (0) +# define MOD28(a) \ + do { \ + CHOP(a); \ + if (a >= BASE) a -= BASE; \ + } while (0) +# define MOD(a) \ + do { \ + CHOP(a); \ + MOD28(a); \ + } while (0) +# define MOD63(a) \ + do { /* this assumes a is not negative */ \ + z_off64_t tmp = a >> 32; \ + a &= 0xffffffffL; \ + a += (tmp << 8) - (tmp << 5) + tmp; \ + tmp = a >> 16; \ + a &= 0xffffL; \ + a += (tmp << 4) - tmp; \ + tmp = a >> 16; \ + a &= 0xffffL; \ + a += (tmp << 4) - tmp; \ + if (a >= BASE) a -= BASE; \ + } while (0) +#else +# define MOD(a) a %= BASE +# define MOD28(a) a %= BASE +# define MOD63(a) a %= BASE +#endif + +/* ========================================================================= */ +uLong ZEXPORT adler32(adler, buf, len) + uLong adler; + const Bytef *buf; + uInt len; +{ + unsigned long sum2; + unsigned n; + + /* split Adler-32 into component sums */ + sum2 = (adler >> 16) & 0xffff; + adler &= 0xffff; + + /* in case user likes doing a byte at a time, keep it fast */ + if (len == 1) { + adler += buf[0]; + if (adler >= BASE) + adler -= BASE; + sum2 += adler; + if (sum2 >= BASE) + sum2 -= BASE; + return adler | (sum2 << 16); + } + + /* initial Adler-32 value (deferred check for len == 1 speed) */ + if (buf == Z_NULL) + return 1L; + + /* in case short lengths are provided, keep it somewhat fast */ + if (len < 16) { + while (len--) { + adler += *buf++; + sum2 += adler; + } + if (adler >= BASE) + adler -= BASE; + MOD28(sum2); /* only added so many BASE's */ + return adler | (sum2 << 16); + } + + /* do length NMAX blocks -- requires just one modulo operation */ + while (len >= NMAX) { + len -= NMAX; + n = NMAX / 16; /* NMAX is divisible by 16 */ + do { + DO16(buf); /* 16 sums unrolled */ + buf += 16; + } while (--n); + MOD(adler); + MOD(sum2); + } + + /* do remaining bytes (less than NMAX, still just one modulo) */ + if (len) { /* avoid modulos if none remaining */ + while (len >= 16) { + len -= 16; + DO16(buf); + buf += 16; + } + while (len--) { + adler += *buf++; + sum2 += adler; + } + MOD(adler); + MOD(sum2); + } + + /* return recombined sums */ + return adler | (sum2 << 16); +} + +/* ========================================================================= */ +local uLong adler32_combine_(adler1, adler2, len2) + uLong adler1; + uLong adler2; + z_off64_t len2; +{ + unsigned long sum1; + unsigned long sum2; + unsigned rem; + + /* for negative len, return invalid adler32 as a clue for debugging */ + if (len2 < 0) + return 0xffffffffUL; + + /* the derivation of this formula is left as an exercise for the reader */ + MOD63(len2); /* assumes len2 >= 0 */ + rem = (unsigned)len2; + sum1 = adler1 & 0xffff; + sum2 = rem * sum1; + MOD(sum2); + sum1 += (adler2 & 0xffff) + BASE - 1; + sum2 += ((adler1 >> 16) & 0xffff) + ((adler2 >> 16) & 0xffff) + BASE - rem; + if (sum1 >= BASE) sum1 -= BASE; + if (sum1 >= BASE) sum1 -= BASE; + if (sum2 >= (BASE << 1)) sum2 -= (BASE << 1); + if (sum2 >= BASE) sum2 -= BASE; + return sum1 | (sum2 << 16); +} + +/* ========================================================================= */ +uLong ZEXPORT adler32_combine(adler1, adler2, len2) + uLong adler1; + uLong adler2; + z_off_t len2; +{ + return adler32_combine_(adler1, adler2, len2); +} + +uLong ZEXPORT adler32_combine64(adler1, adler2, len2) + uLong adler1; + uLong adler2; + z_off64_t len2; +{ + return adler32_combine_(adler1, adler2, len2); +} diff --git a/software/scsi2sd-util/zlib-1.2.8/amiga/Makefile.pup b/software/scsi2sd-util/zlib-1.2.8/amiga/Makefile.pup new file mode 100644 index 0000000..8940c12 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/amiga/Makefile.pup @@ -0,0 +1,69 @@ +# Amiga powerUP (TM) Makefile +# makefile for libpng and SAS C V6.58/7.00 PPC compiler +# Copyright (C) 1998 by Andreas R. Kleinert + +LIBNAME = libzip.a + +CC = scppc +CFLAGS = NOSTKCHK NOSINT OPTIMIZE OPTGO OPTPEEP OPTINLOCAL OPTINL \ + OPTLOOP OPTRDEP=8 OPTDEP=8 OPTCOMP=8 NOVER +AR = ppc-amigaos-ar cr +RANLIB = ppc-amigaos-ranlib +LD = ppc-amigaos-ld -r +LDFLAGS = -o +LDLIBS = LIB:scppc.a LIB:end.o +RM = delete quiet + +OBJS = adler32.o compress.o crc32.o gzclose.o gzlib.o gzread.o gzwrite.o \ + uncompr.o deflate.o trees.o zutil.o inflate.o infback.o inftrees.o inffast.o + +TEST_OBJS = example.o minigzip.o + +all: example minigzip + +check: test +test: all + example + echo hello world | minigzip | minigzip -d + +$(LIBNAME): $(OBJS) + $(AR) $@ $(OBJS) + -$(RANLIB) $@ + +example: example.o $(LIBNAME) + $(LD) $(LDFLAGS) $@ LIB:c_ppc.o $@.o $(LIBNAME) $(LDLIBS) + +minigzip: minigzip.o $(LIBNAME) + $(LD) $(LDFLAGS) $@ LIB:c_ppc.o $@.o $(LIBNAME) $(LDLIBS) + +mostlyclean: clean +clean: + $(RM) *.o example minigzip $(LIBNAME) foo.gz + +zip: + zip -ul9 zlib README ChangeLog Makefile Make????.??? Makefile.?? \ + descrip.mms *.[ch] + +tgz: + cd ..; tar cfz zlib/zlib.tgz zlib/README zlib/ChangeLog zlib/Makefile \ + zlib/Make????.??? zlib/Makefile.?? zlib/descrip.mms zlib/*.[ch] + +# DO NOT DELETE THIS LINE -- make depend depends on it. + +adler32.o: zlib.h zconf.h +compress.o: zlib.h zconf.h +crc32.o: crc32.h zlib.h zconf.h +deflate.o: deflate.h zutil.h zlib.h zconf.h +example.o: zlib.h zconf.h +gzclose.o: zlib.h zconf.h gzguts.h +gzlib.o: zlib.h zconf.h gzguts.h +gzread.o: zlib.h zconf.h gzguts.h +gzwrite.o: zlib.h zconf.h gzguts.h +inffast.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h +inflate.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h +infback.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h +inftrees.o: zutil.h zlib.h zconf.h inftrees.h +minigzip.o: zlib.h zconf.h +trees.o: deflate.h zutil.h zlib.h zconf.h trees.h +uncompr.o: zlib.h zconf.h +zutil.o: zutil.h zlib.h zconf.h diff --git a/software/scsi2sd-util/zlib-1.2.8/amiga/Makefile.sas b/software/scsi2sd-util/zlib-1.2.8/amiga/Makefile.sas new file mode 100644 index 0000000..749e291 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/amiga/Makefile.sas @@ -0,0 +1,68 @@ +# SMakefile for zlib +# Modified from the standard UNIX Makefile Copyright Jean-loup Gailly +# Osma Ahvenlampi +# Amiga, SAS/C 6.56 & Smake + +CC=sc +CFLAGS=OPT +#CFLAGS=OPT CPU=68030 +#CFLAGS=DEBUG=LINE +LDFLAGS=LIB z.lib + +SCOPTIONS=OPTSCHED OPTINLINE OPTALIAS OPTTIME OPTINLOCAL STRMERGE \ + NOICONS PARMS=BOTH NOSTACKCHECK UTILLIB NOVERSION ERRORREXX \ + DEF=POSTINC + +OBJS = adler32.o compress.o crc32.o gzclose.o gzlib.o gzread.o gzwrite.o \ + uncompr.o deflate.o trees.o zutil.o inflate.o infback.o inftrees.o inffast.o + +TEST_OBJS = example.o minigzip.o + +all: SCOPTIONS example minigzip + +check: test +test: all + example + echo hello world | minigzip | minigzip -d + +install: z.lib + copy clone zlib.h zconf.h INCLUDE: + copy clone z.lib LIB: + +z.lib: $(OBJS) + oml z.lib r $(OBJS) + +example: example.o z.lib + $(CC) $(CFLAGS) LINK TO $@ example.o $(LDFLAGS) + +minigzip: minigzip.o z.lib + $(CC) $(CFLAGS) LINK TO $@ minigzip.o $(LDFLAGS) + +mostlyclean: clean +clean: + -delete force quiet example minigzip *.o z.lib foo.gz *.lnk SCOPTIONS + +SCOPTIONS: Makefile.sas + copy to $@ 64K on 16-bit machine: */ + if ((uLong)stream.avail_in != sourceLen) return Z_BUF_ERROR; +#endif + stream.next_out = dest; + stream.avail_out = (uInt)*destLen; + if ((uLong)stream.avail_out != *destLen) return Z_BUF_ERROR; + + stream.zalloc = (alloc_func)0; + stream.zfree = (free_func)0; + stream.opaque = (voidpf)0; + + err = deflateInit(&stream, level); + if (err != Z_OK) return err; + + err = deflate(&stream, Z_FINISH); + if (err != Z_STREAM_END) { + deflateEnd(&stream); + return err == Z_OK ? Z_BUF_ERROR : err; + } + *destLen = stream.total_out; + + err = deflateEnd(&stream); + return err; +} + +/* =========================================================================== + */ +int ZEXPORT compress (dest, destLen, source, sourceLen) + Bytef *dest; + uLongf *destLen; + const Bytef *source; + uLong sourceLen; +{ + return compress2(dest, destLen, source, sourceLen, Z_DEFAULT_COMPRESSION); +} + +/* =========================================================================== + If the default memLevel or windowBits for deflateInit() is changed, then + this function needs to be updated. + */ +uLong ZEXPORT compressBound (sourceLen) + uLong sourceLen; +{ + return sourceLen + (sourceLen >> 12) + (sourceLen >> 14) + + (sourceLen >> 25) + 13; +} diff --git a/software/scsi2sd-util/zlib-1.2.8/configure b/software/scsi2sd-util/zlib-1.2.8/configure new file mode 100755 index 0000000..b77a8a8 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/configure @@ -0,0 +1,831 @@ +#!/bin/sh +# configure script for zlib. +# +# Normally configure builds both a static and a shared library. +# If you want to build just a static library, use: ./configure --static +# +# To impose specific compiler or flags or install directory, use for example: +# prefix=$HOME CC=cc CFLAGS="-O4" ./configure +# or for csh/tcsh users: +# (setenv prefix $HOME; setenv CC cc; setenv CFLAGS "-O4"; ./configure) + +# Incorrect settings of CC or CFLAGS may prevent creating a shared library. +# If you have problems, try without defining CC and CFLAGS before reporting +# an error. + +# start off configure.log +echo -------------------- >> configure.log +echo $0 $* >> configure.log +date >> configure.log + +# set command prefix for cross-compilation +if [ -n "${CHOST}" ]; then + uname="`echo "${CHOST}" | sed -e 's/^[^-]*-\([^-]*\)$/\1/' -e 's/^[^-]*-[^-]*-\([^-]*\)$/\1/' -e 's/^[^-]*-[^-]*-\([^-]*\)-.*$/\1/'`" + CROSS_PREFIX="${CHOST}-" +fi + +# destination name for static library +STATICLIB=libz.a + +# extract zlib version numbers from zlib.h +VER=`sed -n -e '/VERSION "/s/.*"\(.*\)".*/\1/p' < zlib.h` +VER3=`sed -n -e '/VERSION "/s/.*"\([0-9]*\\.[0-9]*\\.[0-9]*\).*/\1/p' < zlib.h` +VER2=`sed -n -e '/VERSION "/s/.*"\([0-9]*\\.[0-9]*\)\\..*/\1/p' < zlib.h` +VER1=`sed -n -e '/VERSION "/s/.*"\([0-9]*\)\\..*/\1/p' < zlib.h` + +# establish commands for library building +if "${CROSS_PREFIX}ar" --version >/dev/null 2>/dev/null || test $? -lt 126; then + AR=${AR-"${CROSS_PREFIX}ar"} + test -n "${CROSS_PREFIX}" && echo Using ${AR} | tee -a configure.log +else + AR=${AR-"ar"} + test -n "${CROSS_PREFIX}" && echo Using ${AR} | tee -a configure.log +fi +ARFLAGS=${ARFLAGS-"rc"} +if "${CROSS_PREFIX}ranlib" --version >/dev/null 2>/dev/null || test $? -lt 126; then + RANLIB=${RANLIB-"${CROSS_PREFIX}ranlib"} + test -n "${CROSS_PREFIX}" && echo Using ${RANLIB} | tee -a configure.log +else + RANLIB=${RANLIB-"ranlib"} +fi +if "${CROSS_PREFIX}nm" --version >/dev/null 2>/dev/null || test $? -lt 126; then + NM=${NM-"${CROSS_PREFIX}nm"} + test -n "${CROSS_PREFIX}" && echo Using ${NM} | tee -a configure.log +else + NM=${NM-"nm"} +fi + +# set defaults before processing command line options +LDCONFIG=${LDCONFIG-"ldconfig"} +LDSHAREDLIBC="${LDSHAREDLIBC--lc}" +ARCHS= +prefix=${prefix-/usr/local} +exec_prefix=${exec_prefix-'${prefix}'} +libdir=${libdir-'${exec_prefix}/lib'} +sharedlibdir=${sharedlibdir-'${libdir}'} +includedir=${includedir-'${prefix}/include'} +mandir=${mandir-'${prefix}/share/man'} +shared_ext='.so' +shared=1 +solo=0 +cover=0 +zprefix=0 +zconst=0 +build64=0 +gcc=0 +old_cc="$CC" +old_cflags="$CFLAGS" +OBJC='$(OBJZ) $(OBJG)' +PIC_OBJC='$(PIC_OBJZ) $(PIC_OBJG)' + +# leave this script, optionally in a bad way +leave() +{ + if test "$*" != "0"; then + echo "** $0 aborting." | tee -a configure.log + fi + rm -f $test.[co] $test $test$shared_ext $test.gcno ./--version + echo -------------------- >> configure.log + echo >> configure.log + echo >> configure.log + exit $1 +} + +# process command line options +while test $# -ge 1 +do +case "$1" in + -h* | --help) + echo 'usage:' | tee -a configure.log + echo ' configure [--const] [--zprefix] [--prefix=PREFIX] [--eprefix=EXPREFIX]' | tee -a configure.log + echo ' [--static] [--64] [--libdir=LIBDIR] [--sharedlibdir=LIBDIR]' | tee -a configure.log + echo ' [--includedir=INCLUDEDIR] [--archs="-arch i386 -arch x86_64"]' | tee -a configure.log + exit 0 ;; + -p*=* | --prefix=*) prefix=`echo $1 | sed 's/.*=//'`; shift ;; + -e*=* | --eprefix=*) exec_prefix=`echo $1 | sed 's/.*=//'`; shift ;; + -l*=* | --libdir=*) libdir=`echo $1 | sed 's/.*=//'`; shift ;; + --sharedlibdir=*) sharedlibdir=`echo $1 | sed 's/.*=//'`; shift ;; + -i*=* | --includedir=*) includedir=`echo $1 | sed 's/.*=//'`;shift ;; + -u*=* | --uname=*) uname=`echo $1 | sed 's/.*=//'`;shift ;; + -p* | --prefix) prefix="$2"; shift; shift ;; + -e* | --eprefix) exec_prefix="$2"; shift; shift ;; + -l* | --libdir) libdir="$2"; shift; shift ;; + -i* | --includedir) includedir="$2"; shift; shift ;; + -s* | --shared | --enable-shared) shared=1; shift ;; + -t | --static) shared=0; shift ;; + --solo) solo=1; shift ;; + --cover) cover=1; shift ;; + -z* | --zprefix) zprefix=1; shift ;; + -6* | --64) build64=1; shift ;; + -a*=* | --archs=*) ARCHS=`echo $1 | sed 's/.*=//'`; shift ;; + --sysconfdir=*) echo "ignored option: --sysconfdir" | tee -a configure.log; shift ;; + --localstatedir=*) echo "ignored option: --localstatedir" | tee -a configure.log; shift ;; + -c* | --const) zconst=1; shift ;; + *) + echo "unknown option: $1" | tee -a configure.log + echo "$0 --help for help" | tee -a configure.log + leave 1;; + esac +done + +# temporary file name +test=ztest$$ + +# put arguments in log, also put test file in log if used in arguments +show() +{ + case "$*" in + *$test.c*) + echo === $test.c === >> configure.log + cat $test.c >> configure.log + echo === >> configure.log;; + esac + echo $* >> configure.log +} + +# check for gcc vs. cc and set compile and link flags based on the system identified by uname +cat > $test.c <&1` in + *gcc*) gcc=1 ;; +esac + +show $cc -c $test.c +if test "$gcc" -eq 1 && ($cc -c $test.c) >> configure.log 2>&1; then + echo ... using gcc >> configure.log + CC="$cc" + CFLAGS="${CFLAGS--O3} ${ARCHS}" + SFLAGS="${CFLAGS--O3} -fPIC" + LDFLAGS="${LDFLAGS} ${ARCHS}" + if test $build64 -eq 1; then + CFLAGS="${CFLAGS} -m64" + SFLAGS="${SFLAGS} -m64" + fi + if test "${ZLIBGCCWARN}" = "YES"; then + if test "$zconst" -eq 1; then + CFLAGS="${CFLAGS} -Wall -Wextra -Wcast-qual -pedantic -DZLIB_CONST" + else + CFLAGS="${CFLAGS} -Wall -Wextra -pedantic" + fi + fi + if test -z "$uname"; then + uname=`(uname -s || echo unknown) 2>/dev/null` + fi + case "$uname" in + Linux* | linux* | GNU | GNU/* | solaris*) + LDSHARED=${LDSHARED-"$cc -shared -Wl,-soname,libz.so.1,--version-script,zlib.map"} ;; + *BSD | *bsd* | DragonFly) + LDSHARED=${LDSHARED-"$cc -shared -Wl,-soname,libz.so.1,--version-script,zlib.map"} + LDCONFIG="ldconfig -m" ;; + CYGWIN* | Cygwin* | cygwin* | OS/2*) + EXE='.exe' ;; + MINGW* | mingw*) +# temporary bypass + rm -f $test.[co] $test $test$shared_ext + echo "Please use win32/Makefile.gcc instead." | tee -a configure.log + leave 1 + LDSHARED=${LDSHARED-"$cc -shared"} + LDSHAREDLIBC="" + EXE='.exe' ;; + QNX*) # This is for QNX6. I suppose that the QNX rule below is for QNX2,QNX4 + # (alain.bonnefoy@icbt.com) + LDSHARED=${LDSHARED-"$cc -shared -Wl,-hlibz.so.1"} ;; + HP-UX*) + LDSHARED=${LDSHARED-"$cc -shared $SFLAGS"} + case `(uname -m || echo unknown) 2>/dev/null` in + ia64) + shared_ext='.so' + SHAREDLIB='libz.so' ;; + *) + shared_ext='.sl' + SHAREDLIB='libz.sl' ;; + esac ;; + Darwin* | darwin*) + shared_ext='.dylib' + SHAREDLIB=libz$shared_ext + SHAREDLIBV=libz.$VER$shared_ext + SHAREDLIBM=libz.$VER1$shared_ext + LDSHARED=${LDSHARED-"$cc -dynamiclib -install_name $libdir/$SHAREDLIBM -compatibility_version $VER1 -current_version $VER3"} + if libtool -V 2>&1 | grep Apple > /dev/null; then + AR="libtool" + else + AR="/usr/bin/libtool" + fi + ARFLAGS="-o" ;; + *) LDSHARED=${LDSHARED-"$cc -shared"} ;; + esac +else + # find system name and corresponding cc options + CC=${CC-cc} + gcc=0 + echo ... using $CC >> configure.log + if test -z "$uname"; then + uname=`(uname -sr || echo unknown) 2>/dev/null` + fi + case "$uname" in + HP-UX*) SFLAGS=${CFLAGS-"-O +z"} + CFLAGS=${CFLAGS-"-O"} +# LDSHARED=${LDSHARED-"ld -b +vnocompatwarnings"} + LDSHARED=${LDSHARED-"ld -b"} + case `(uname -m || echo unknown) 2>/dev/null` in + ia64) + shared_ext='.so' + SHAREDLIB='libz.so' ;; + *) + shared_ext='.sl' + SHAREDLIB='libz.sl' ;; + esac ;; + IRIX*) SFLAGS=${CFLAGS-"-ansi -O2 -rpath ."} + CFLAGS=${CFLAGS-"-ansi -O2"} + LDSHARED=${LDSHARED-"cc -shared -Wl,-soname,libz.so.1"} ;; + OSF1\ V4*) SFLAGS=${CFLAGS-"-O -std1"} + CFLAGS=${CFLAGS-"-O -std1"} + LDFLAGS="${LDFLAGS} -Wl,-rpath,." + LDSHARED=${LDSHARED-"cc -shared -Wl,-soname,libz.so -Wl,-msym -Wl,-rpath,$(libdir) -Wl,-set_version,${VER}:1.0"} ;; + OSF1*) SFLAGS=${CFLAGS-"-O -std1"} + CFLAGS=${CFLAGS-"-O -std1"} + LDSHARED=${LDSHARED-"cc -shared -Wl,-soname,libz.so.1"} ;; + QNX*) SFLAGS=${CFLAGS-"-4 -O"} + CFLAGS=${CFLAGS-"-4 -O"} + LDSHARED=${LDSHARED-"cc"} + RANLIB=${RANLIB-"true"} + AR="cc" + ARFLAGS="-A" ;; + SCO_SV\ 3.2*) SFLAGS=${CFLAGS-"-O3 -dy -KPIC "} + CFLAGS=${CFLAGS-"-O3"} + LDSHARED=${LDSHARED-"cc -dy -KPIC -G"} ;; + SunOS\ 5* | solaris*) + LDSHARED=${LDSHARED-"cc -G -h libz$shared_ext.$VER1"} + SFLAGS=${CFLAGS-"-fast -KPIC"} + CFLAGS=${CFLAGS-"-fast"} + if test $build64 -eq 1; then + # old versions of SunPRO/Workshop/Studio don't support -m64, + # but newer ones do. Check for it. + flag64=`$CC -flags | egrep -- '^-m64'` + if test x"$flag64" != x"" ; then + CFLAGS="${CFLAGS} -m64" + SFLAGS="${SFLAGS} -m64" + else + case `(uname -m || echo unknown) 2>/dev/null` in + i86*) + SFLAGS="$SFLAGS -xarch=amd64" + CFLAGS="$CFLAGS -xarch=amd64" ;; + *) + SFLAGS="$SFLAGS -xarch=v9" + CFLAGS="$CFLAGS -xarch=v9" ;; + esac + fi + fi + ;; + SunOS\ 4*) SFLAGS=${CFLAGS-"-O2 -PIC"} + CFLAGS=${CFLAGS-"-O2"} + LDSHARED=${LDSHARED-"ld"} ;; + SunStudio\ 9*) SFLAGS=${CFLAGS-"-fast -xcode=pic32 -xtarget=ultra3 -xarch=v9b"} + CFLAGS=${CFLAGS-"-fast -xtarget=ultra3 -xarch=v9b"} + LDSHARED=${LDSHARED-"cc -xarch=v9b"} ;; + UNIX_System_V\ 4.2.0) + SFLAGS=${CFLAGS-"-KPIC -O"} + CFLAGS=${CFLAGS-"-O"} + LDSHARED=${LDSHARED-"cc -G"} ;; + UNIX_SV\ 4.2MP) + SFLAGS=${CFLAGS-"-Kconform_pic -O"} + CFLAGS=${CFLAGS-"-O"} + LDSHARED=${LDSHARED-"cc -G"} ;; + OpenUNIX\ 5) + SFLAGS=${CFLAGS-"-KPIC -O"} + CFLAGS=${CFLAGS-"-O"} + LDSHARED=${LDSHARED-"cc -G"} ;; + AIX*) # Courtesy of dbakker@arrayasolutions.com + SFLAGS=${CFLAGS-"-O -qmaxmem=8192"} + CFLAGS=${CFLAGS-"-O -qmaxmem=8192"} + LDSHARED=${LDSHARED-"xlc -G"} ;; + # send working options for other systems to zlib@gzip.org + *) SFLAGS=${CFLAGS-"-O"} + CFLAGS=${CFLAGS-"-O"} + LDSHARED=${LDSHARED-"cc -shared"} ;; + esac +fi + +# destination names for shared library if not defined above +SHAREDLIB=${SHAREDLIB-"libz$shared_ext"} +SHAREDLIBV=${SHAREDLIBV-"libz$shared_ext.$VER"} +SHAREDLIBM=${SHAREDLIBM-"libz$shared_ext.$VER1"} + +echo >> configure.log + +# define functions for testing compiler and library characteristics and logging the results + +cat > $test.c </dev/null; then + try() + { + show $* + test "`( $* ) 2>&1 | tee -a configure.log`" = "" + } + echo - using any output from compiler to indicate an error >> configure.log +else +try() +{ + show $* + ( $* ) >> configure.log 2>&1 + ret=$? + if test $ret -ne 0; then + echo "(exit code "$ret")" >> configure.log + fi + return $ret +} +fi + +tryboth() +{ + show $* + got=`( $* ) 2>&1` + ret=$? + printf %s "$got" >> configure.log + if test $ret -ne 0; then + return $ret + fi + test "$got" = "" +} + +cat > $test.c << EOF +int foo() { return 0; } +EOF +echo "Checking for obsessive-compulsive compiler options..." >> configure.log +if try $CC -c $CFLAGS $test.c; then + : +else + echo "Compiler error reporting is too harsh for $0 (perhaps remove -Werror)." | tee -a configure.log + leave 1 +fi + +echo >> configure.log + +# see if shared library build supported +cat > $test.c <> configure.log + show "$NM $test.o | grep _hello" + if test "`$NM $test.o | grep _hello | tee -a configure.log`" = ""; then + CPP="$CPP -DNO_UNDERLINE" + echo Checking for underline in external names... No. | tee -a configure.log + else + echo Checking for underline in external names... Yes. | tee -a configure.log + fi ;; +esac + +echo >> configure.log + +# check for large file support, and if none, check for fseeko() +cat > $test.c < +off64_t dummy = 0; +EOF +if try $CC -c $CFLAGS -D_LARGEFILE64_SOURCE=1 $test.c; then + CFLAGS="${CFLAGS} -D_LARGEFILE64_SOURCE=1" + SFLAGS="${SFLAGS} -D_LARGEFILE64_SOURCE=1" + ALL="${ALL} all64" + TEST="${TEST} test64" + echo "Checking for off64_t... Yes." | tee -a configure.log + echo "Checking for fseeko... Yes." | tee -a configure.log +else + echo "Checking for off64_t... No." | tee -a configure.log + echo >> configure.log + cat > $test.c < +int main(void) { + fseeko(NULL, 0, 0); + return 0; +} +EOF + if try $CC $CFLAGS -o $test $test.c; then + echo "Checking for fseeko... Yes." | tee -a configure.log + else + CFLAGS="${CFLAGS} -DNO_FSEEKO" + SFLAGS="${SFLAGS} -DNO_FSEEKO" + echo "Checking for fseeko... No." | tee -a configure.log + fi +fi + +echo >> configure.log + +# check for strerror() for use by gz* functions +cat > $test.c < +#include +int main() { return strlen(strerror(errno)); } +EOF +if try $CC $CFLAGS -o $test $test.c; then + echo "Checking for strerror... Yes." | tee -a configure.log +else + CFLAGS="${CFLAGS} -DNO_STRERROR" + SFLAGS="${SFLAGS} -DNO_STRERROR" + echo "Checking for strerror... No." | tee -a configure.log +fi + +# copy clean zconf.h for subsequent edits +cp -p zconf.h.in zconf.h + +echo >> configure.log + +# check for unistd.h and save result in zconf.h +cat > $test.c < +int main() { return 0; } +EOF +if try $CC -c $CFLAGS $test.c; then + sed < zconf.h "/^#ifdef HAVE_UNISTD_H.* may be/s/def HAVE_UNISTD_H\(.*\) may be/ 1\1 was/" > zconf.temp.h + mv zconf.temp.h zconf.h + echo "Checking for unistd.h... Yes." | tee -a configure.log +else + echo "Checking for unistd.h... No." | tee -a configure.log +fi + +echo >> configure.log + +# check for stdarg.h and save result in zconf.h +cat > $test.c < +int main() { return 0; } +EOF +if try $CC -c $CFLAGS $test.c; then + sed < zconf.h "/^#ifdef HAVE_STDARG_H.* may be/s/def HAVE_STDARG_H\(.*\) may be/ 1\1 was/" > zconf.temp.h + mv zconf.temp.h zconf.h + echo "Checking for stdarg.h... Yes." | tee -a configure.log +else + echo "Checking for stdarg.h... No." | tee -a configure.log +fi + +# if the z_ prefix was requested, save that in zconf.h +if test $zprefix -eq 1; then + sed < zconf.h "/#ifdef Z_PREFIX.* may be/s/def Z_PREFIX\(.*\) may be/ 1\1 was/" > zconf.temp.h + mv zconf.temp.h zconf.h + echo >> configure.log + echo "Using z_ prefix on all symbols." | tee -a configure.log +fi + +# if --solo compilation was requested, save that in zconf.h and remove gz stuff from object lists +if test $solo -eq 1; then + sed '/#define ZCONF_H/a\ +#define Z_SOLO + +' < zconf.h > zconf.temp.h + mv zconf.temp.h zconf.h +OBJC='$(OBJZ)' +PIC_OBJC='$(PIC_OBJZ)' +fi + +# if code coverage testing was requested, use older gcc if defined, e.g. "gcc-4.2" on Mac OS X +if test $cover -eq 1; then + CFLAGS="${CFLAGS} -fprofile-arcs -ftest-coverage" + if test -n "$GCC_CLASSIC"; then + CC=$GCC_CLASSIC + fi +fi + +echo >> configure.log + +# conduct a series of tests to resolve eight possible cases of using "vs" or "s" printf functions +# (using stdarg or not), with or without "n" (proving size of buffer), and with or without a +# return value. The most secure result is vsnprintf() with a return value. snprintf() with a +# return value is secure as well, but then gzprintf() will be limited to 20 arguments. +cat > $test.c < +#include +#include "zconf.h" +int main() +{ +#ifndef STDC + choke me +#endif + return 0; +} +EOF +if try $CC -c $CFLAGS $test.c; then + echo "Checking whether to use vs[n]printf() or s[n]printf()... using vs[n]printf()." | tee -a configure.log + + echo >> configure.log + cat > $test.c < +#include +int mytest(const char *fmt, ...) +{ + char buf[20]; + va_list ap; + va_start(ap, fmt); + vsnprintf(buf, sizeof(buf), fmt, ap); + va_end(ap); + return 0; +} +int main() +{ + return (mytest("Hello%d\n", 1)); +} +EOF + if try $CC $CFLAGS -o $test $test.c; then + echo "Checking for vsnprintf() in stdio.h... Yes." | tee -a configure.log + + echo >> configure.log + cat >$test.c < +#include +int mytest(const char *fmt, ...) +{ + int n; + char buf[20]; + va_list ap; + va_start(ap, fmt); + n = vsnprintf(buf, sizeof(buf), fmt, ap); + va_end(ap); + return n; +} +int main() +{ + return (mytest("Hello%d\n", 1)); +} +EOF + + if try $CC -c $CFLAGS $test.c; then + echo "Checking for return value of vsnprintf()... Yes." | tee -a configure.log + else + CFLAGS="$CFLAGS -DHAS_vsnprintf_void" + SFLAGS="$SFLAGS -DHAS_vsnprintf_void" + echo "Checking for return value of vsnprintf()... No." | tee -a configure.log + echo " WARNING: apparently vsnprintf() does not return a value. zlib" | tee -a configure.log + echo " can build but will be open to possible string-format security" | tee -a configure.log + echo " vulnerabilities." | tee -a configure.log + fi + else + CFLAGS="$CFLAGS -DNO_vsnprintf" + SFLAGS="$SFLAGS -DNO_vsnprintf" + echo "Checking for vsnprintf() in stdio.h... No." | tee -a configure.log + echo " WARNING: vsnprintf() not found, falling back to vsprintf(). zlib" | tee -a configure.log + echo " can build but will be open to possible buffer-overflow security" | tee -a configure.log + echo " vulnerabilities." | tee -a configure.log + + echo >> configure.log + cat >$test.c < +#include +int mytest(const char *fmt, ...) +{ + int n; + char buf[20]; + va_list ap; + va_start(ap, fmt); + n = vsprintf(buf, fmt, ap); + va_end(ap); + return n; +} +int main() +{ + return (mytest("Hello%d\n", 1)); +} +EOF + + if try $CC -c $CFLAGS $test.c; then + echo "Checking for return value of vsprintf()... Yes." | tee -a configure.log + else + CFLAGS="$CFLAGS -DHAS_vsprintf_void" + SFLAGS="$SFLAGS -DHAS_vsprintf_void" + echo "Checking for return value of vsprintf()... No." | tee -a configure.log + echo " WARNING: apparently vsprintf() does not return a value. zlib" | tee -a configure.log + echo " can build but will be open to possible string-format security" | tee -a configure.log + echo " vulnerabilities." | tee -a configure.log + fi + fi +else + echo "Checking whether to use vs[n]printf() or s[n]printf()... using s[n]printf()." | tee -a configure.log + + echo >> configure.log + cat >$test.c < +int mytest() +{ + char buf[20]; + snprintf(buf, sizeof(buf), "%s", "foo"); + return 0; +} +int main() +{ + return (mytest()); +} +EOF + + if try $CC $CFLAGS -o $test $test.c; then + echo "Checking for snprintf() in stdio.h... Yes." | tee -a configure.log + + echo >> configure.log + cat >$test.c < +int mytest() +{ + char buf[20]; + return snprintf(buf, sizeof(buf), "%s", "foo"); +} +int main() +{ + return (mytest()); +} +EOF + + if try $CC -c $CFLAGS $test.c; then + echo "Checking for return value of snprintf()... Yes." | tee -a configure.log + else + CFLAGS="$CFLAGS -DHAS_snprintf_void" + SFLAGS="$SFLAGS -DHAS_snprintf_void" + echo "Checking for return value of snprintf()... No." | tee -a configure.log + echo " WARNING: apparently snprintf() does not return a value. zlib" | tee -a configure.log + echo " can build but will be open to possible string-format security" | tee -a configure.log + echo " vulnerabilities." | tee -a configure.log + fi + else + CFLAGS="$CFLAGS -DNO_snprintf" + SFLAGS="$SFLAGS -DNO_snprintf" + echo "Checking for snprintf() in stdio.h... No." | tee -a configure.log + echo " WARNING: snprintf() not found, falling back to sprintf(). zlib" | tee -a configure.log + echo " can build but will be open to possible buffer-overflow security" | tee -a configure.log + echo " vulnerabilities." | tee -a configure.log + + echo >> configure.log + cat >$test.c < +int mytest() +{ + char buf[20]; + return sprintf(buf, "%s", "foo"); +} +int main() +{ + return (mytest()); +} +EOF + + if try $CC -c $CFLAGS $test.c; then + echo "Checking for return value of sprintf()... Yes." | tee -a configure.log + else + CFLAGS="$CFLAGS -DHAS_sprintf_void" + SFLAGS="$SFLAGS -DHAS_sprintf_void" + echo "Checking for return value of sprintf()... No." | tee -a configure.log + echo " WARNING: apparently sprintf() does not return a value. zlib" | tee -a configure.log + echo " can build but will be open to possible string-format security" | tee -a configure.log + echo " vulnerabilities." | tee -a configure.log + fi + fi +fi + +# see if we can hide zlib internal symbols that are linked between separate source files +if test "$gcc" -eq 1; then + echo >> configure.log + cat > $test.c <> configure.log +echo ALL = $ALL >> configure.log +echo AR = $AR >> configure.log +echo ARFLAGS = $ARFLAGS >> configure.log +echo CC = $CC >> configure.log +echo CFLAGS = $CFLAGS >> configure.log +echo CPP = $CPP >> configure.log +echo EXE = $EXE >> configure.log +echo LDCONFIG = $LDCONFIG >> configure.log +echo LDFLAGS = $LDFLAGS >> configure.log +echo LDSHARED = $LDSHARED >> configure.log +echo LDSHAREDLIBC = $LDSHAREDLIBC >> configure.log +echo OBJC = $OBJC >> configure.log +echo PIC_OBJC = $PIC_OBJC >> configure.log +echo RANLIB = $RANLIB >> configure.log +echo SFLAGS = $SFLAGS >> configure.log +echo SHAREDLIB = $SHAREDLIB >> configure.log +echo SHAREDLIBM = $SHAREDLIBM >> configure.log +echo SHAREDLIBV = $SHAREDLIBV >> configure.log +echo STATICLIB = $STATICLIB >> configure.log +echo TEST = $TEST >> configure.log +echo VER = $VER >> configure.log +echo Z_U4 = $Z_U4 >> configure.log +echo exec_prefix = $exec_prefix >> configure.log +echo includedir = $includedir >> configure.log +echo libdir = $libdir >> configure.log +echo mandir = $mandir >> configure.log +echo prefix = $prefix >> configure.log +echo sharedlibdir = $sharedlibdir >> configure.log +echo uname = $uname >> configure.log + +# udpate Makefile with the configure results +sed < Makefile.in " +/^CC *=/s#=.*#=$CC# +/^CFLAGS *=/s#=.*#=$CFLAGS# +/^SFLAGS *=/s#=.*#=$SFLAGS# +/^LDFLAGS *=/s#=.*#=$LDFLAGS# +/^LDSHARED *=/s#=.*#=$LDSHARED# +/^CPP *=/s#=.*#=$CPP# +/^STATICLIB *=/s#=.*#=$STATICLIB# +/^SHAREDLIB *=/s#=.*#=$SHAREDLIB# +/^SHAREDLIBV *=/s#=.*#=$SHAREDLIBV# +/^SHAREDLIBM *=/s#=.*#=$SHAREDLIBM# +/^AR *=/s#=.*#=$AR# +/^ARFLAGS *=/s#=.*#=$ARFLAGS# +/^RANLIB *=/s#=.*#=$RANLIB# +/^LDCONFIG *=/s#=.*#=$LDCONFIG# +/^LDSHAREDLIBC *=/s#=.*#=$LDSHAREDLIBC# +/^EXE *=/s#=.*#=$EXE# +/^prefix *=/s#=.*#=$prefix# +/^exec_prefix *=/s#=.*#=$exec_prefix# +/^libdir *=/s#=.*#=$libdir# +/^sharedlibdir *=/s#=.*#=$sharedlibdir# +/^includedir *=/s#=.*#=$includedir# +/^mandir *=/s#=.*#=$mandir# +/^OBJC *=/s#=.*#= $OBJC# +/^PIC_OBJC *=/s#=.*#= $PIC_OBJC# +/^all: */s#:.*#: $ALL# +/^test: */s#:.*#: $TEST# +" > Makefile + +# create zlib.pc with the configure results +sed < zlib.pc.in " +/^CC *=/s#=.*#=$CC# +/^CFLAGS *=/s#=.*#=$CFLAGS# +/^CPP *=/s#=.*#=$CPP# +/^LDSHARED *=/s#=.*#=$LDSHARED# +/^STATICLIB *=/s#=.*#=$STATICLIB# +/^SHAREDLIB *=/s#=.*#=$SHAREDLIB# +/^SHAREDLIBV *=/s#=.*#=$SHAREDLIBV# +/^SHAREDLIBM *=/s#=.*#=$SHAREDLIBM# +/^AR *=/s#=.*#=$AR# +/^ARFLAGS *=/s#=.*#=$ARFLAGS# +/^RANLIB *=/s#=.*#=$RANLIB# +/^EXE *=/s#=.*#=$EXE# +/^prefix *=/s#=.*#=$prefix# +/^exec_prefix *=/s#=.*#=$exec_prefix# +/^libdir *=/s#=.*#=$libdir# +/^sharedlibdir *=/s#=.*#=$sharedlibdir# +/^includedir *=/s#=.*#=$includedir# +/^mandir *=/s#=.*#=$mandir# +/^LDFLAGS *=/s#=.*#=$LDFLAGS# +" | sed -e " +s/\@VERSION\@/$VER/g; +" > zlib.pc + +# done +leave 0 diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/README.contrib b/software/scsi2sd-util/zlib-1.2.8/contrib/README.contrib new file mode 100644 index 0000000..c66349b --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/README.contrib @@ -0,0 +1,78 @@ +All files under this contrib directory are UNSUPPORTED. There were +provided by users of zlib and were not tested by the authors of zlib. +Use at your own risk. Please contact the authors of the contributions +for help about these, not the zlib authors. Thanks. + + +ada/ by Dmitriy Anisimkov + Support for Ada + See http://zlib-ada.sourceforge.net/ + +amd64/ by Mikhail Teterin + asm code for AMD64 + See patch at http://www.freebsd.org/cgi/query-pr.cgi?pr=bin/96393 + +asm686/ by Brian Raiter + asm code for Pentium and PPro/PII, using the AT&T (GNU as) syntax + See http://www.muppetlabs.com/~breadbox/software/assembly.html + +blast/ by Mark Adler + Decompressor for output of PKWare Data Compression Library (DCL) + +delphi/ by Cosmin Truta + Support for Delphi and C++ Builder + +dotzlib/ by Henrik Ravn + Support for Microsoft .Net and Visual C++ .Net + +gcc_gvmat64/by Gilles Vollant + GCC Version of x86 64-bit (AMD64 and Intel EM64t) code for x64 + assembler to replace longest_match() and inflate_fast() + +infback9/ by Mark Adler + Unsupported diffs to infback to decode the deflate64 format + +inflate86/ by Chris Anderson + Tuned x86 gcc asm code to replace inflate_fast() + +iostream/ by Kevin Ruland + A C++ I/O streams interface to the zlib gz* functions + +iostream2/ by Tyge Løvset + Another C++ I/O streams interface + +iostream3/ by Ludwig Schwardt + and Kevin Ruland + Yet another C++ I/O streams interface + +masmx64/ by Gilles Vollant + x86 64-bit (AMD64 and Intel EM64t) code for x64 assembler to + replace longest_match() and inflate_fast(), also masm x86 + 64-bits translation of Chris Anderson inflate_fast() + +masmx86/ by Gilles Vollant + x86 asm code to replace longest_match() and inflate_fast(), + for Visual C++ and MASM (32 bits). + Based on Brian Raiter (asm686) and Chris Anderson (inflate86) + +minizip/ by Gilles Vollant + Mini zip and unzip based on zlib + Includes Zip64 support by Mathias Svensson + See http://www.winimage.com/zLibDll/unzip.html + +pascal/ by Bob Dellaca et al. + Support for Pascal + +puff/ by Mark Adler + Small, low memory usage inflate. Also serves to provide an + unambiguous description of the deflate format. + +testzlib/ by Gilles Vollant + Example of the use of zlib + +untgz/ by Pedro A. Aranda Gutierrez + A very simple tar.gz file extractor using zlib + +vstudio/ by Gilles Vollant + Building a minizip-enhanced zlib with Microsoft Visual Studio + Includes vc11 from kreuzerkrieg and vc12 from davispuh diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/ada/buffer_demo.adb b/software/scsi2sd-util/zlib-1.2.8/contrib/ada/buffer_demo.adb new file mode 100644 index 0000000..46b8638 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/ada/buffer_demo.adb @@ -0,0 +1,106 @@ +---------------------------------------------------------------- +-- ZLib for Ada thick binding. -- +-- -- +-- Copyright (C) 2002-2004 Dmitriy Anisimkov -- +-- -- +-- Open source license information is in the zlib.ads file. -- +---------------------------------------------------------------- +-- +-- $Id: buffer_demo.adb,v 1.3 2004/09/06 06:55:35 vagul Exp $ + +-- This demo program provided by Dr Steve Sangwine +-- +-- Demonstration of a problem with Zlib-Ada (already fixed) when a buffer +-- of exactly the correct size is used for decompressed data, and the last +-- few bytes passed in to Zlib are checksum bytes. + +-- This program compresses a string of text, and then decompresses the +-- compressed text into a buffer of the same size as the original text. + +with Ada.Streams; use Ada.Streams; +with Ada.Text_IO; + +with ZLib; use ZLib; + +procedure Buffer_Demo is + EOL : Character renames ASCII.LF; + Text : constant String + := "Four score and seven years ago our fathers brought forth," & EOL & + "upon this continent, a new nation, conceived in liberty," & EOL & + "and dedicated to the proposition that `all men are created equal'."; + + Source : Stream_Element_Array (1 .. Text'Length); + for Source'Address use Text'Address; + +begin + Ada.Text_IO.Put (Text); + Ada.Text_IO.New_Line; + Ada.Text_IO.Put_Line + ("Uncompressed size : " & Positive'Image (Text'Length) & " bytes"); + + declare + Compressed_Data : Stream_Element_Array (1 .. Text'Length); + L : Stream_Element_Offset; + begin + Compress : declare + Compressor : Filter_Type; + I : Stream_Element_Offset; + begin + Deflate_Init (Compressor); + + -- Compress the whole of T at once. + + Translate (Compressor, Source, I, Compressed_Data, L, Finish); + pragma Assert (I = Source'Last); + + Close (Compressor); + + Ada.Text_IO.Put_Line + ("Compressed size : " + & Stream_Element_Offset'Image (L) & " bytes"); + end Compress; + + -- Now we decompress the data, passing short blocks of data to Zlib + -- (because this demonstrates the problem - the last block passed will + -- contain checksum information and there will be no output, only a + -- check inside Zlib that the checksum is correct). + + Decompress : declare + Decompressor : Filter_Type; + + Uncompressed_Data : Stream_Element_Array (1 .. Text'Length); + + Block_Size : constant := 4; + -- This makes sure that the last block contains + -- only Adler checksum data. + + P : Stream_Element_Offset := Compressed_Data'First - 1; + O : Stream_Element_Offset; + begin + Inflate_Init (Decompressor); + + loop + Translate + (Decompressor, + Compressed_Data + (P + 1 .. Stream_Element_Offset'Min (P + Block_Size, L)), + P, + Uncompressed_Data + (Total_Out (Decompressor) + 1 .. Uncompressed_Data'Last), + O, + No_Flush); + + Ada.Text_IO.Put_Line + ("Total in : " & Count'Image (Total_In (Decompressor)) & + ", out : " & Count'Image (Total_Out (Decompressor))); + + exit when P = L; + end loop; + + Ada.Text_IO.New_Line; + Ada.Text_IO.Put_Line + ("Decompressed text matches original text : " + & Boolean'Image (Uncompressed_Data = Source)); + end Decompress; + end; +end Buffer_Demo; diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/ada/mtest.adb b/software/scsi2sd-util/zlib-1.2.8/contrib/ada/mtest.adb new file mode 100644 index 0000000..c4dfd08 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/ada/mtest.adb @@ -0,0 +1,156 @@ +---------------------------------------------------------------- +-- ZLib for Ada thick binding. -- +-- -- +-- Copyright (C) 2002-2003 Dmitriy Anisimkov -- +-- -- +-- Open source license information is in the zlib.ads file. -- +---------------------------------------------------------------- +-- Continuous test for ZLib multithreading. If the test would fail +-- we should provide thread safe allocation routines for the Z_Stream. +-- +-- $Id: mtest.adb,v 1.4 2004/07/23 07:49:54 vagul Exp $ + +with ZLib; +with Ada.Streams; +with Ada.Numerics.Discrete_Random; +with Ada.Text_IO; +with Ada.Exceptions; +with Ada.Task_Identification; + +procedure MTest is + use Ada.Streams; + use ZLib; + + Stop : Boolean := False; + + pragma Atomic (Stop); + + subtype Visible_Symbols is Stream_Element range 16#20# .. 16#7E#; + + package Random_Elements is + new Ada.Numerics.Discrete_Random (Visible_Symbols); + + task type Test_Task; + + task body Test_Task is + Buffer : Stream_Element_Array (1 .. 100_000); + Gen : Random_Elements.Generator; + + Buffer_First : Stream_Element_Offset; + Compare_First : Stream_Element_Offset; + + Deflate : Filter_Type; + Inflate : Filter_Type; + + procedure Further (Item : in Stream_Element_Array); + + procedure Read_Buffer + (Item : out Ada.Streams.Stream_Element_Array; + Last : out Ada.Streams.Stream_Element_Offset); + + ------------- + -- Further -- + ------------- + + procedure Further (Item : in Stream_Element_Array) is + + procedure Compare (Item : in Stream_Element_Array); + + ------------- + -- Compare -- + ------------- + + procedure Compare (Item : in Stream_Element_Array) is + Next_First : Stream_Element_Offset := Compare_First + Item'Length; + begin + if Buffer (Compare_First .. Next_First - 1) /= Item then + raise Program_Error; + end if; + + Compare_First := Next_First; + end Compare; + + procedure Compare_Write is new ZLib.Write (Write => Compare); + begin + Compare_Write (Inflate, Item, No_Flush); + end Further; + + ----------------- + -- Read_Buffer -- + ----------------- + + procedure Read_Buffer + (Item : out Ada.Streams.Stream_Element_Array; + Last : out Ada.Streams.Stream_Element_Offset) + is + Buff_Diff : Stream_Element_Offset := Buffer'Last - Buffer_First; + Next_First : Stream_Element_Offset; + begin + if Item'Length <= Buff_Diff then + Last := Item'Last; + + Next_First := Buffer_First + Item'Length; + + Item := Buffer (Buffer_First .. Next_First - 1); + + Buffer_First := Next_First; + else + Last := Item'First + Buff_Diff; + Item (Item'First .. Last) := Buffer (Buffer_First .. Buffer'Last); + Buffer_First := Buffer'Last + 1; + end if; + end Read_Buffer; + + procedure Translate is new Generic_Translate + (Data_In => Read_Buffer, + Data_Out => Further); + + begin + Random_Elements.Reset (Gen); + + Buffer := (others => 20); + + Main : loop + for J in Buffer'Range loop + Buffer (J) := Random_Elements.Random (Gen); + + Deflate_Init (Deflate); + Inflate_Init (Inflate); + + Buffer_First := Buffer'First; + Compare_First := Buffer'First; + + Translate (Deflate); + + if Compare_First /= Buffer'Last + 1 then + raise Program_Error; + end if; + + Ada.Text_IO.Put_Line + (Ada.Task_Identification.Image + (Ada.Task_Identification.Current_Task) + & Stream_Element_Offset'Image (J) + & ZLib.Count'Image (Total_Out (Deflate))); + + Close (Deflate); + Close (Inflate); + + exit Main when Stop; + end loop; + end loop Main; + exception + when E : others => + Ada.Text_IO.Put_Line (Ada.Exceptions.Exception_Information (E)); + Stop := True; + end Test_Task; + + Test : array (1 .. 4) of Test_Task; + + pragma Unreferenced (Test); + + Dummy : Character; + +begin + Ada.Text_IO.Get_Immediate (Dummy); + Stop := True; +end MTest; diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/ada/read.adb b/software/scsi2sd-util/zlib-1.2.8/contrib/ada/read.adb new file mode 100644 index 0000000..1f2efbf --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/ada/read.adb @@ -0,0 +1,156 @@ +---------------------------------------------------------------- +-- ZLib for Ada thick binding. -- +-- -- +-- Copyright (C) 2002-2003 Dmitriy Anisimkov -- +-- -- +-- Open source license information is in the zlib.ads file. -- +---------------------------------------------------------------- + +-- $Id: read.adb,v 1.8 2004/05/31 10:53:40 vagul Exp $ + +-- Test/demo program for the generic read interface. + +with Ada.Numerics.Discrete_Random; +with Ada.Streams; +with Ada.Text_IO; + +with ZLib; + +procedure Read is + + use Ada.Streams; + + ------------------------------------ + -- Test configuration parameters -- + ------------------------------------ + + File_Size : Stream_Element_Offset := 100_000; + + Continuous : constant Boolean := False; + -- If this constant is True, the test would be repeated again and again, + -- with increment File_Size for every iteration. + + Header : constant ZLib.Header_Type := ZLib.Default; + -- Do not use Header other than Default in ZLib versions 1.1.4 and older. + + Init_Random : constant := 8; + -- We are using the same random sequence, in case of we catch bug, + -- so we would be able to reproduce it. + + -- End -- + + Pack_Size : Stream_Element_Offset; + Offset : Stream_Element_Offset; + + Filter : ZLib.Filter_Type; + + subtype Visible_Symbols + is Stream_Element range 16#20# .. 16#7E#; + + package Random_Elements is new + Ada.Numerics.Discrete_Random (Visible_Symbols); + + Gen : Random_Elements.Generator; + Period : constant Stream_Element_Offset := 200; + -- Period constant variable for random generator not to be very random. + -- Bigger period, harder random. + + Read_Buffer : Stream_Element_Array (1 .. 2048); + Read_First : Stream_Element_Offset; + Read_Last : Stream_Element_Offset; + + procedure Reset; + + procedure Read + (Item : out Stream_Element_Array; + Last : out Stream_Element_Offset); + -- this procedure is for generic instantiation of + -- ZLib.Read + -- reading data from the File_In. + + procedure Read is new ZLib.Read + (Read, + Read_Buffer, + Rest_First => Read_First, + Rest_Last => Read_Last); + + ---------- + -- Read -- + ---------- + + procedure Read + (Item : out Stream_Element_Array; + Last : out Stream_Element_Offset) is + begin + Last := Stream_Element_Offset'Min + (Item'Last, + Item'First + File_Size - Offset); + + for J in Item'First .. Last loop + if J < Item'First + Period then + Item (J) := Random_Elements.Random (Gen); + else + Item (J) := Item (J - Period); + end if; + + Offset := Offset + 1; + end loop; + end Read; + + ----------- + -- Reset -- + ----------- + + procedure Reset is + begin + Random_Elements.Reset (Gen, Init_Random); + Pack_Size := 0; + Offset := 1; + Read_First := Read_Buffer'Last + 1; + Read_Last := Read_Buffer'Last; + end Reset; + +begin + Ada.Text_IO.Put_Line ("ZLib " & ZLib.Version); + + loop + for Level in ZLib.Compression_Level'Range loop + + Ada.Text_IO.Put ("Level =" + & ZLib.Compression_Level'Image (Level)); + + -- Deflate using generic instantiation. + + ZLib.Deflate_Init + (Filter, + Level, + Header => Header); + + Reset; + + Ada.Text_IO.Put + (Stream_Element_Offset'Image (File_Size) & " ->"); + + loop + declare + Buffer : Stream_Element_Array (1 .. 1024); + Last : Stream_Element_Offset; + begin + Read (Filter, Buffer, Last); + + Pack_Size := Pack_Size + Last - Buffer'First + 1; + + exit when Last < Buffer'Last; + end; + end loop; + + Ada.Text_IO.Put_Line (Stream_Element_Offset'Image (Pack_Size)); + + ZLib.Close (Filter); + end loop; + + exit when not Continuous; + + File_Size := File_Size + 1; + end loop; +end Read; diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/ada/readme.txt b/software/scsi2sd-util/zlib-1.2.8/contrib/ada/readme.txt new file mode 100644 index 0000000..ce4d2ca --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/ada/readme.txt @@ -0,0 +1,65 @@ + ZLib for Ada thick binding (ZLib.Ada) + Release 1.3 + +ZLib.Ada is a thick binding interface to the popular ZLib data +compression library, available at http://www.gzip.org/zlib/. +It provides Ada-style access to the ZLib C library. + + + Here are the main changes since ZLib.Ada 1.2: + +- Attension: ZLib.Read generic routine have a initialization requirement + for Read_Last parameter now. It is a bit incompartible with previous version, + but extends functionality, we could use new parameters Allow_Read_Some and + Flush now. + +- Added Is_Open routines to ZLib and ZLib.Streams packages. + +- Add pragma Assert to check Stream_Element is 8 bit. + +- Fix extraction to buffer with exact known decompressed size. Error reported by + Steve Sangwine. + +- Fix definition of ULong (changed to unsigned_long), fix regression on 64 bits + computers. Patch provided by Pascal Obry. + +- Add Status_Error exception definition. + +- Add pragma Assertion that Ada.Streams.Stream_Element size is 8 bit. + + + How to build ZLib.Ada under GNAT + +You should have the ZLib library already build on your computer, before +building ZLib.Ada. Make the directory of ZLib.Ada sources current and +issue the command: + + gnatmake test -largs -L -lz + +Or use the GNAT project file build for GNAT 3.15 or later: + + gnatmake -Pzlib.gpr -L + + + How to build ZLib.Ada under Aonix ObjectAda for Win32 7.2.2 + +1. Make a project with all *.ads and *.adb files from the distribution. +2. Build the libz.a library from the ZLib C sources. +3. Rename libz.a to z.lib. +4. Add the library z.lib to the project. +5. Add the libc.lib library from the ObjectAda distribution to the project. +6. Build the executable using test.adb as a main procedure. + + + How to use ZLib.Ada + +The source files test.adb and read.adb are small demo programs that show +the main functionality of ZLib.Ada. + +The routines from the package specifications are commented. + + +Homepage: http://zlib-ada.sourceforge.net/ +Author: Dmitriy Anisimkov + +Contributors: Pascal Obry , Steve Sangwine diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/ada/test.adb b/software/scsi2sd-util/zlib-1.2.8/contrib/ada/test.adb new file mode 100644 index 0000000..90773ac --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/ada/test.adb @@ -0,0 +1,463 @@ +---------------------------------------------------------------- +-- ZLib for Ada thick binding. -- +-- -- +-- Copyright (C) 2002-2003 Dmitriy Anisimkov -- +-- -- +-- Open source license information is in the zlib.ads file. -- +---------------------------------------------------------------- + +-- $Id: test.adb,v 1.17 2003/08/12 12:13:30 vagul Exp $ + +-- The program has a few aims. +-- 1. Test ZLib.Ada95 thick binding functionality. +-- 2. Show the example of use main functionality of the ZLib.Ada95 binding. +-- 3. Build this program automatically compile all ZLib.Ada95 packages under +-- GNAT Ada95 compiler. + +with ZLib.Streams; +with Ada.Streams.Stream_IO; +with Ada.Numerics.Discrete_Random; + +with Ada.Text_IO; + +with Ada.Calendar; + +procedure Test is + + use Ada.Streams; + use Stream_IO; + + ------------------------------------ + -- Test configuration parameters -- + ------------------------------------ + + File_Size : Count := 100_000; + Continuous : constant Boolean := False; + + Header : constant ZLib.Header_Type := ZLib.Default; + -- ZLib.None; + -- ZLib.Auto; + -- ZLib.GZip; + -- Do not use Header other then Default in ZLib versions 1.1.4 + -- and older. + + Strategy : constant ZLib.Strategy_Type := ZLib.Default_Strategy; + Init_Random : constant := 10; + + -- End -- + + In_File_Name : constant String := "testzlib.in"; + -- Name of the input file + + Z_File_Name : constant String := "testzlib.zlb"; + -- Name of the compressed file. + + Out_File_Name : constant String := "testzlib.out"; + -- Name of the decompressed file. + + File_In : File_Type; + File_Out : File_Type; + File_Back : File_Type; + File_Z : ZLib.Streams.Stream_Type; + + Filter : ZLib.Filter_Type; + + Time_Stamp : Ada.Calendar.Time; + + procedure Generate_File; + -- Generate file of spetsified size with some random data. + -- The random data is repeatable, for the good compression. + + procedure Compare_Streams + (Left, Right : in out Root_Stream_Type'Class); + -- The procedure compearing data in 2 streams. + -- It is for compare data before and after compression/decompression. + + procedure Compare_Files (Left, Right : String); + -- Compare files. Based on the Compare_Streams. + + procedure Copy_Streams + (Source, Target : in out Root_Stream_Type'Class; + Buffer_Size : in Stream_Element_Offset := 1024); + -- Copying data from one stream to another. It is for test stream + -- interface of the library. + + procedure Data_In + (Item : out Stream_Element_Array; + Last : out Stream_Element_Offset); + -- this procedure is for generic instantiation of + -- ZLib.Generic_Translate. + -- reading data from the File_In. + + procedure Data_Out (Item : in Stream_Element_Array); + -- this procedure is for generic instantiation of + -- ZLib.Generic_Translate. + -- writing data to the File_Out. + + procedure Stamp; + -- Store the timestamp to the local variable. + + procedure Print_Statistic (Msg : String; Data_Size : ZLib.Count); + -- Print the time statistic with the message. + + procedure Translate is new ZLib.Generic_Translate + (Data_In => Data_In, + Data_Out => Data_Out); + -- This procedure is moving data from File_In to File_Out + -- with compression or decompression, depend on initialization of + -- Filter parameter. + + ------------------- + -- Compare_Files -- + ------------------- + + procedure Compare_Files (Left, Right : String) is + Left_File, Right_File : File_Type; + begin + Open (Left_File, In_File, Left); + Open (Right_File, In_File, Right); + Compare_Streams (Stream (Left_File).all, Stream (Right_File).all); + Close (Left_File); + Close (Right_File); + end Compare_Files; + + --------------------- + -- Compare_Streams -- + --------------------- + + procedure Compare_Streams + (Left, Right : in out Ada.Streams.Root_Stream_Type'Class) + is + Left_Buffer, Right_Buffer : Stream_Element_Array (0 .. 16#FFF#); + Left_Last, Right_Last : Stream_Element_Offset; + begin + loop + Read (Left, Left_Buffer, Left_Last); + Read (Right, Right_Buffer, Right_Last); + + if Left_Last /= Right_Last then + Ada.Text_IO.Put_Line ("Compare error :" + & Stream_Element_Offset'Image (Left_Last) + & " /= " + & Stream_Element_Offset'Image (Right_Last)); + + raise Constraint_Error; + + elsif Left_Buffer (0 .. Left_Last) + /= Right_Buffer (0 .. Right_Last) + then + Ada.Text_IO.Put_Line ("ERROR: IN and OUT files is not equal."); + raise Constraint_Error; + + end if; + + exit when Left_Last < Left_Buffer'Last; + end loop; + end Compare_Streams; + + ------------------ + -- Copy_Streams -- + ------------------ + + procedure Copy_Streams + (Source, Target : in out Ada.Streams.Root_Stream_Type'Class; + Buffer_Size : in Stream_Element_Offset := 1024) + is + Buffer : Stream_Element_Array (1 .. Buffer_Size); + Last : Stream_Element_Offset; + begin + loop + Read (Source, Buffer, Last); + Write (Target, Buffer (1 .. Last)); + + exit when Last < Buffer'Last; + end loop; + end Copy_Streams; + + ------------- + -- Data_In -- + ------------- + + procedure Data_In + (Item : out Stream_Element_Array; + Last : out Stream_Element_Offset) is + begin + Read (File_In, Item, Last); + end Data_In; + + -------------- + -- Data_Out -- + -------------- + + procedure Data_Out (Item : in Stream_Element_Array) is + begin + Write (File_Out, Item); + end Data_Out; + + ------------------- + -- Generate_File -- + ------------------- + + procedure Generate_File is + subtype Visible_Symbols is Stream_Element range 16#20# .. 16#7E#; + + package Random_Elements is + new Ada.Numerics.Discrete_Random (Visible_Symbols); + + Gen : Random_Elements.Generator; + Buffer : Stream_Element_Array := (1 .. 77 => 16#20#) & 10; + + Buffer_Count : constant Count := File_Size / Buffer'Length; + -- Number of same buffers in the packet. + + Density : constant Count := 30; -- from 0 to Buffer'Length - 2; + + procedure Fill_Buffer (J, D : in Count); + -- Change the part of the buffer. + + ----------------- + -- Fill_Buffer -- + ----------------- + + procedure Fill_Buffer (J, D : in Count) is + begin + for K in 0 .. D loop + Buffer + (Stream_Element_Offset ((J + K) mod (Buffer'Length - 1) + 1)) + := Random_Elements.Random (Gen); + + end loop; + end Fill_Buffer; + + begin + Random_Elements.Reset (Gen, Init_Random); + + Create (File_In, Out_File, In_File_Name); + + Fill_Buffer (1, Buffer'Length - 2); + + for J in 1 .. Buffer_Count loop + Write (File_In, Buffer); + + Fill_Buffer (J, Density); + end loop; + + -- fill remain size. + + Write + (File_In, + Buffer + (1 .. Stream_Element_Offset + (File_Size - Buffer'Length * Buffer_Count))); + + Flush (File_In); + Close (File_In); + end Generate_File; + + --------------------- + -- Print_Statistic -- + --------------------- + + procedure Print_Statistic (Msg : String; Data_Size : ZLib.Count) is + use Ada.Calendar; + use Ada.Text_IO; + + package Count_IO is new Integer_IO (ZLib.Count); + + Curr_Dur : Duration := Clock - Time_Stamp; + begin + Put (Msg); + + Set_Col (20); + Ada.Text_IO.Put ("size ="); + + Count_IO.Put + (Data_Size, + Width => Stream_IO.Count'Image (File_Size)'Length); + + Put_Line (" duration =" & Duration'Image (Curr_Dur)); + end Print_Statistic; + + ----------- + -- Stamp -- + ----------- + + procedure Stamp is + begin + Time_Stamp := Ada.Calendar.Clock; + end Stamp; + +begin + Ada.Text_IO.Put_Line ("ZLib " & ZLib.Version); + + loop + Generate_File; + + for Level in ZLib.Compression_Level'Range loop + + Ada.Text_IO.Put_Line ("Level =" + & ZLib.Compression_Level'Image (Level)); + + -- Test generic interface. + Open (File_In, In_File, In_File_Name); + Create (File_Out, Out_File, Z_File_Name); + + Stamp; + + -- Deflate using generic instantiation. + + ZLib.Deflate_Init + (Filter => Filter, + Level => Level, + Strategy => Strategy, + Header => Header); + + Translate (Filter); + Print_Statistic ("Generic compress", ZLib.Total_Out (Filter)); + ZLib.Close (Filter); + + Close (File_In); + Close (File_Out); + + Open (File_In, In_File, Z_File_Name); + Create (File_Out, Out_File, Out_File_Name); + + Stamp; + + -- Inflate using generic instantiation. + + ZLib.Inflate_Init (Filter, Header => Header); + + Translate (Filter); + Print_Statistic ("Generic decompress", ZLib.Total_Out (Filter)); + + ZLib.Close (Filter); + + Close (File_In); + Close (File_Out); + + Compare_Files (In_File_Name, Out_File_Name); + + -- Test stream interface. + + -- Compress to the back stream. + + Open (File_In, In_File, In_File_Name); + Create (File_Back, Out_File, Z_File_Name); + + Stamp; + + ZLib.Streams.Create + (Stream => File_Z, + Mode => ZLib.Streams.Out_Stream, + Back => ZLib.Streams.Stream_Access + (Stream (File_Back)), + Back_Compressed => True, + Level => Level, + Strategy => Strategy, + Header => Header); + + Copy_Streams + (Source => Stream (File_In).all, + Target => File_Z); + + -- Flushing internal buffers to the back stream. + + ZLib.Streams.Flush (File_Z, ZLib.Finish); + + Print_Statistic ("Write compress", + ZLib.Streams.Write_Total_Out (File_Z)); + + ZLib.Streams.Close (File_Z); + + Close (File_In); + Close (File_Back); + + -- Compare reading from original file and from + -- decompression stream. + + Open (File_In, In_File, In_File_Name); + Open (File_Back, In_File, Z_File_Name); + + ZLib.Streams.Create + (Stream => File_Z, + Mode => ZLib.Streams.In_Stream, + Back => ZLib.Streams.Stream_Access + (Stream (File_Back)), + Back_Compressed => True, + Header => Header); + + Stamp; + Compare_Streams (Stream (File_In).all, File_Z); + + Print_Statistic ("Read decompress", + ZLib.Streams.Read_Total_Out (File_Z)); + + ZLib.Streams.Close (File_Z); + Close (File_In); + Close (File_Back); + + -- Compress by reading from compression stream. + + Open (File_Back, In_File, In_File_Name); + Create (File_Out, Out_File, Z_File_Name); + + ZLib.Streams.Create + (Stream => File_Z, + Mode => ZLib.Streams.In_Stream, + Back => ZLib.Streams.Stream_Access + (Stream (File_Back)), + Back_Compressed => False, + Level => Level, + Strategy => Strategy, + Header => Header); + + Stamp; + Copy_Streams + (Source => File_Z, + Target => Stream (File_Out).all); + + Print_Statistic ("Read compress", + ZLib.Streams.Read_Total_Out (File_Z)); + + ZLib.Streams.Close (File_Z); + + Close (File_Out); + Close (File_Back); + + -- Decompress to decompression stream. + + Open (File_In, In_File, Z_File_Name); + Create (File_Back, Out_File, Out_File_Name); + + ZLib.Streams.Create + (Stream => File_Z, + Mode => ZLib.Streams.Out_Stream, + Back => ZLib.Streams.Stream_Access + (Stream (File_Back)), + Back_Compressed => False, + Header => Header); + + Stamp; + + Copy_Streams + (Source => Stream (File_In).all, + Target => File_Z); + + Print_Statistic ("Write decompress", + ZLib.Streams.Write_Total_Out (File_Z)); + + ZLib.Streams.Close (File_Z); + Close (File_In); + Close (File_Back); + + Compare_Files (In_File_Name, Out_File_Name); + end loop; + + Ada.Text_IO.Put_Line (Count'Image (File_Size) & " Ok."); + + exit when not Continuous; + + File_Size := File_Size + 1; + end loop; +end Test; diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/ada/zlib-streams.adb b/software/scsi2sd-util/zlib-1.2.8/contrib/ada/zlib-streams.adb new file mode 100644 index 0000000..b6497ba --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/ada/zlib-streams.adb @@ -0,0 +1,225 @@ +---------------------------------------------------------------- +-- ZLib for Ada thick binding. -- +-- -- +-- Copyright (C) 2002-2003 Dmitriy Anisimkov -- +-- -- +-- Open source license information is in the zlib.ads file. -- +---------------------------------------------------------------- + +-- $Id: zlib-streams.adb,v 1.10 2004/05/31 10:53:40 vagul Exp $ + +with Ada.Unchecked_Deallocation; + +package body ZLib.Streams is + + ----------- + -- Close -- + ----------- + + procedure Close (Stream : in out Stream_Type) is + procedure Free is new Ada.Unchecked_Deallocation + (Stream_Element_Array, Buffer_Access); + begin + if Stream.Mode = Out_Stream or Stream.Mode = Duplex then + -- We should flush the data written by the writer. + + Flush (Stream, Finish); + + Close (Stream.Writer); + end if; + + if Stream.Mode = In_Stream or Stream.Mode = Duplex then + Close (Stream.Reader); + Free (Stream.Buffer); + end if; + end Close; + + ------------ + -- Create -- + ------------ + + procedure Create + (Stream : out Stream_Type; + Mode : in Stream_Mode; + Back : in Stream_Access; + Back_Compressed : in Boolean; + Level : in Compression_Level := Default_Compression; + Strategy : in Strategy_Type := Default_Strategy; + Header : in Header_Type := Default; + Read_Buffer_Size : in Ada.Streams.Stream_Element_Offset + := Default_Buffer_Size; + Write_Buffer_Size : in Ada.Streams.Stream_Element_Offset + := Default_Buffer_Size) + is + + subtype Buffer_Subtype is Stream_Element_Array (1 .. Read_Buffer_Size); + + procedure Init_Filter + (Filter : in out Filter_Type; + Compress : in Boolean); + + ----------------- + -- Init_Filter -- + ----------------- + + procedure Init_Filter + (Filter : in out Filter_Type; + Compress : in Boolean) is + begin + if Compress then + Deflate_Init + (Filter, Level, Strategy, Header => Header); + else + Inflate_Init (Filter, Header => Header); + end if; + end Init_Filter; + + begin + Stream.Back := Back; + Stream.Mode := Mode; + + if Mode = Out_Stream or Mode = Duplex then + Init_Filter (Stream.Writer, Back_Compressed); + Stream.Buffer_Size := Write_Buffer_Size; + else + Stream.Buffer_Size := 0; + end if; + + if Mode = In_Stream or Mode = Duplex then + Init_Filter (Stream.Reader, not Back_Compressed); + + Stream.Buffer := new Buffer_Subtype; + Stream.Rest_First := Stream.Buffer'Last + 1; + Stream.Rest_Last := Stream.Buffer'Last; + end if; + end Create; + + ----------- + -- Flush -- + ----------- + + procedure Flush + (Stream : in out Stream_Type; + Mode : in Flush_Mode := Sync_Flush) + is + Buffer : Stream_Element_Array (1 .. Stream.Buffer_Size); + Last : Stream_Element_Offset; + begin + loop + Flush (Stream.Writer, Buffer, Last, Mode); + + Ada.Streams.Write (Stream.Back.all, Buffer (1 .. Last)); + + exit when Last < Buffer'Last; + end loop; + end Flush; + + ------------- + -- Is_Open -- + ------------- + + function Is_Open (Stream : Stream_Type) return Boolean is + begin + return Is_Open (Stream.Reader) or else Is_Open (Stream.Writer); + end Is_Open; + + ---------- + -- Read -- + ---------- + + procedure Read + (Stream : in out Stream_Type; + Item : out Stream_Element_Array; + Last : out Stream_Element_Offset) + is + + procedure Read + (Item : out Stream_Element_Array; + Last : out Stream_Element_Offset); + + ---------- + -- Read -- + ---------- + + procedure Read + (Item : out Stream_Element_Array; + Last : out Stream_Element_Offset) is + begin + Ada.Streams.Read (Stream.Back.all, Item, Last); + end Read; + + procedure Read is new ZLib.Read + (Read => Read, + Buffer => Stream.Buffer.all, + Rest_First => Stream.Rest_First, + Rest_Last => Stream.Rest_Last); + + begin + Read (Stream.Reader, Item, Last); + end Read; + + ------------------- + -- Read_Total_In -- + ------------------- + + function Read_Total_In (Stream : in Stream_Type) return Count is + begin + return Total_In (Stream.Reader); + end Read_Total_In; + + -------------------- + -- Read_Total_Out -- + -------------------- + + function Read_Total_Out (Stream : in Stream_Type) return Count is + begin + return Total_Out (Stream.Reader); + end Read_Total_Out; + + ----------- + -- Write -- + ----------- + + procedure Write + (Stream : in out Stream_Type; + Item : in Stream_Element_Array) + is + + procedure Write (Item : in Stream_Element_Array); + + ----------- + -- Write -- + ----------- + + procedure Write (Item : in Stream_Element_Array) is + begin + Ada.Streams.Write (Stream.Back.all, Item); + end Write; + + procedure Write is new ZLib.Write + (Write => Write, + Buffer_Size => Stream.Buffer_Size); + + begin + Write (Stream.Writer, Item, No_Flush); + end Write; + + -------------------- + -- Write_Total_In -- + -------------------- + + function Write_Total_In (Stream : in Stream_Type) return Count is + begin + return Total_In (Stream.Writer); + end Write_Total_In; + + --------------------- + -- Write_Total_Out -- + --------------------- + + function Write_Total_Out (Stream : in Stream_Type) return Count is + begin + return Total_Out (Stream.Writer); + end Write_Total_Out; + +end ZLib.Streams; diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/ada/zlib-streams.ads b/software/scsi2sd-util/zlib-1.2.8/contrib/ada/zlib-streams.ads new file mode 100644 index 0000000..f0193c6 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/ada/zlib-streams.ads @@ -0,0 +1,114 @@ +---------------------------------------------------------------- +-- ZLib for Ada thick binding. -- +-- -- +-- Copyright (C) 2002-2003 Dmitriy Anisimkov -- +-- -- +-- Open source license information is in the zlib.ads file. -- +---------------------------------------------------------------- + +-- $Id: zlib-streams.ads,v 1.12 2004/05/31 10:53:40 vagul Exp $ + +package ZLib.Streams is + + type Stream_Mode is (In_Stream, Out_Stream, Duplex); + + type Stream_Access is access all Ada.Streams.Root_Stream_Type'Class; + + type Stream_Type is + new Ada.Streams.Root_Stream_Type with private; + + procedure Read + (Stream : in out Stream_Type; + Item : out Ada.Streams.Stream_Element_Array; + Last : out Ada.Streams.Stream_Element_Offset); + + procedure Write + (Stream : in out Stream_Type; + Item : in Ada.Streams.Stream_Element_Array); + + procedure Flush + (Stream : in out Stream_Type; + Mode : in Flush_Mode := Sync_Flush); + -- Flush the written data to the back stream, + -- all data placed to the compressor is flushing to the Back stream. + -- Should not be used untill necessary, becouse it is decreasing + -- compression. + + function Read_Total_In (Stream : in Stream_Type) return Count; + pragma Inline (Read_Total_In); + -- Return total number of bytes read from back stream so far. + + function Read_Total_Out (Stream : in Stream_Type) return Count; + pragma Inline (Read_Total_Out); + -- Return total number of bytes read so far. + + function Write_Total_In (Stream : in Stream_Type) return Count; + pragma Inline (Write_Total_In); + -- Return total number of bytes written so far. + + function Write_Total_Out (Stream : in Stream_Type) return Count; + pragma Inline (Write_Total_Out); + -- Return total number of bytes written to the back stream. + + procedure Create + (Stream : out Stream_Type; + Mode : in Stream_Mode; + Back : in Stream_Access; + Back_Compressed : in Boolean; + Level : in Compression_Level := Default_Compression; + Strategy : in Strategy_Type := Default_Strategy; + Header : in Header_Type := Default; + Read_Buffer_Size : in Ada.Streams.Stream_Element_Offset + := Default_Buffer_Size; + Write_Buffer_Size : in Ada.Streams.Stream_Element_Offset + := Default_Buffer_Size); + -- Create the Comression/Decompression stream. + -- If mode is In_Stream then Write operation is disabled. + -- If mode is Out_Stream then Read operation is disabled. + + -- If Back_Compressed is true then + -- Data written to the Stream is compressing to the Back stream + -- and data read from the Stream is decompressed data from the Back stream. + + -- If Back_Compressed is false then + -- Data written to the Stream is decompressing to the Back stream + -- and data read from the Stream is compressed data from the Back stream. + + -- !!! When the Need_Header is False ZLib-Ada is using undocumented + -- ZLib 1.1.4 functionality to do not create/wait for ZLib headers. + + function Is_Open (Stream : Stream_Type) return Boolean; + + procedure Close (Stream : in out Stream_Type); + +private + + use Ada.Streams; + + type Buffer_Access is access all Stream_Element_Array; + + type Stream_Type + is new Root_Stream_Type with + record + Mode : Stream_Mode; + + Buffer : Buffer_Access; + Rest_First : Stream_Element_Offset; + Rest_Last : Stream_Element_Offset; + -- Buffer for Read operation. + -- We need to have this buffer in the record + -- becouse not all read data from back stream + -- could be processed during the read operation. + + Buffer_Size : Stream_Element_Offset; + -- Buffer size for write operation. + -- We do not need to have this buffer + -- in the record becouse all data could be + -- processed in the write operation. + + Back : Stream_Access; + Reader : Filter_Type; + Writer : Filter_Type; + end record; + +end ZLib.Streams; diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/ada/zlib-thin.adb b/software/scsi2sd-util/zlib-1.2.8/contrib/ada/zlib-thin.adb new file mode 100644 index 0000000..0ca4a71 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/ada/zlib-thin.adb @@ -0,0 +1,141 @@ +---------------------------------------------------------------- +-- ZLib for Ada thick binding. -- +-- -- +-- Copyright (C) 2002-2003 Dmitriy Anisimkov -- +-- -- +-- Open source license information is in the zlib.ads file. -- +---------------------------------------------------------------- + +-- $Id: zlib-thin.adb,v 1.8 2003/12/14 18:27:31 vagul Exp $ + +package body ZLib.Thin is + + ZLIB_VERSION : constant Chars_Ptr := zlibVersion; + + Z_Stream_Size : constant Int := Z_Stream'Size / System.Storage_Unit; + + -------------- + -- Avail_In -- + -------------- + + function Avail_In (Strm : in Z_Stream) return UInt is + begin + return Strm.Avail_In; + end Avail_In; + + --------------- + -- Avail_Out -- + --------------- + + function Avail_Out (Strm : in Z_Stream) return UInt is + begin + return Strm.Avail_Out; + end Avail_Out; + + ------------------ + -- Deflate_Init -- + ------------------ + + function Deflate_Init + (strm : Z_Streamp; + level : Int; + method : Int; + windowBits : Int; + memLevel : Int; + strategy : Int) + return Int is + begin + return deflateInit2 + (strm, + level, + method, + windowBits, + memLevel, + strategy, + ZLIB_VERSION, + Z_Stream_Size); + end Deflate_Init; + + ------------------ + -- Inflate_Init -- + ------------------ + + function Inflate_Init (strm : Z_Streamp; windowBits : Int) return Int is + begin + return inflateInit2 (strm, windowBits, ZLIB_VERSION, Z_Stream_Size); + end Inflate_Init; + + ------------------------ + -- Last_Error_Message -- + ------------------------ + + function Last_Error_Message (Strm : in Z_Stream) return String is + use Interfaces.C.Strings; + begin + if Strm.msg = Null_Ptr then + return ""; + else + return Value (Strm.msg); + end if; + end Last_Error_Message; + + ------------ + -- Set_In -- + ------------ + + procedure Set_In + (Strm : in out Z_Stream; + Buffer : in Voidp; + Size : in UInt) is + begin + Strm.Next_In := Buffer; + Strm.Avail_In := Size; + end Set_In; + + ------------------ + -- Set_Mem_Func -- + ------------------ + + procedure Set_Mem_Func + (Strm : in out Z_Stream; + Opaque : in Voidp; + Alloc : in alloc_func; + Free : in free_func) is + begin + Strm.opaque := Opaque; + Strm.zalloc := Alloc; + Strm.zfree := Free; + end Set_Mem_Func; + + ------------- + -- Set_Out -- + ------------- + + procedure Set_Out + (Strm : in out Z_Stream; + Buffer : in Voidp; + Size : in UInt) is + begin + Strm.Next_Out := Buffer; + Strm.Avail_Out := Size; + end Set_Out; + + -------------- + -- Total_In -- + -------------- + + function Total_In (Strm : in Z_Stream) return ULong is + begin + return Strm.Total_In; + end Total_In; + + --------------- + -- Total_Out -- + --------------- + + function Total_Out (Strm : in Z_Stream) return ULong is + begin + return Strm.Total_Out; + end Total_Out; + +end ZLib.Thin; diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/ada/zlib-thin.ads b/software/scsi2sd-util/zlib-1.2.8/contrib/ada/zlib-thin.ads new file mode 100644 index 0000000..d4407eb --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/ada/zlib-thin.ads @@ -0,0 +1,450 @@ +---------------------------------------------------------------- +-- ZLib for Ada thick binding. -- +-- -- +-- Copyright (C) 2002-2003 Dmitriy Anisimkov -- +-- -- +-- Open source license information is in the zlib.ads file. -- +---------------------------------------------------------------- + +-- $Id: zlib-thin.ads,v 1.11 2004/07/23 06:33:11 vagul Exp $ + +with Interfaces.C.Strings; + +with System; + +private package ZLib.Thin is + + -- From zconf.h + + MAX_MEM_LEVEL : constant := 9; -- zconf.h:105 + -- zconf.h:105 + MAX_WBITS : constant := 15; -- zconf.h:115 + -- 32K LZ77 window + -- zconf.h:115 + SEEK_SET : constant := 8#0000#; -- zconf.h:244 + -- Seek from beginning of file. + -- zconf.h:244 + SEEK_CUR : constant := 1; -- zconf.h:245 + -- Seek from current position. + -- zconf.h:245 + SEEK_END : constant := 2; -- zconf.h:246 + -- Set file pointer to EOF plus "offset" + -- zconf.h:246 + + type Byte is new Interfaces.C.unsigned_char; -- 8 bits + -- zconf.h:214 + type UInt is new Interfaces.C.unsigned; -- 16 bits or more + -- zconf.h:216 + type Int is new Interfaces.C.int; + + type ULong is new Interfaces.C.unsigned_long; -- 32 bits or more + -- zconf.h:217 + subtype Chars_Ptr is Interfaces.C.Strings.chars_ptr; + + type ULong_Access is access ULong; + type Int_Access is access Int; + + subtype Voidp is System.Address; -- zconf.h:232 + + subtype Byte_Access is Voidp; + + Nul : constant Voidp := System.Null_Address; + -- end from zconf + + Z_NO_FLUSH : constant := 8#0000#; -- zlib.h:125 + -- zlib.h:125 + Z_PARTIAL_FLUSH : constant := 1; -- zlib.h:126 + -- will be removed, use + -- Z_SYNC_FLUSH instead + -- zlib.h:126 + Z_SYNC_FLUSH : constant := 2; -- zlib.h:127 + -- zlib.h:127 + Z_FULL_FLUSH : constant := 3; -- zlib.h:128 + -- zlib.h:128 + Z_FINISH : constant := 4; -- zlib.h:129 + -- zlib.h:129 + Z_OK : constant := 8#0000#; -- zlib.h:132 + -- zlib.h:132 + Z_STREAM_END : constant := 1; -- zlib.h:133 + -- zlib.h:133 + Z_NEED_DICT : constant := 2; -- zlib.h:134 + -- zlib.h:134 + Z_ERRNO : constant := -1; -- zlib.h:135 + -- zlib.h:135 + Z_STREAM_ERROR : constant := -2; -- zlib.h:136 + -- zlib.h:136 + Z_DATA_ERROR : constant := -3; -- zlib.h:137 + -- zlib.h:137 + Z_MEM_ERROR : constant := -4; -- zlib.h:138 + -- zlib.h:138 + Z_BUF_ERROR : constant := -5; -- zlib.h:139 + -- zlib.h:139 + Z_VERSION_ERROR : constant := -6; -- zlib.h:140 + -- zlib.h:140 + Z_NO_COMPRESSION : constant := 8#0000#; -- zlib.h:145 + -- zlib.h:145 + Z_BEST_SPEED : constant := 1; -- zlib.h:146 + -- zlib.h:146 + Z_BEST_COMPRESSION : constant := 9; -- zlib.h:147 + -- zlib.h:147 + Z_DEFAULT_COMPRESSION : constant := -1; -- zlib.h:148 + -- zlib.h:148 + Z_FILTERED : constant := 1; -- zlib.h:151 + -- zlib.h:151 + Z_HUFFMAN_ONLY : constant := 2; -- zlib.h:152 + -- zlib.h:152 + Z_DEFAULT_STRATEGY : constant := 8#0000#; -- zlib.h:153 + -- zlib.h:153 + Z_BINARY : constant := 8#0000#; -- zlib.h:156 + -- zlib.h:156 + Z_ASCII : constant := 1; -- zlib.h:157 + -- zlib.h:157 + Z_UNKNOWN : constant := 2; -- zlib.h:158 + -- zlib.h:158 + Z_DEFLATED : constant := 8; -- zlib.h:161 + -- zlib.h:161 + Z_NULL : constant := 8#0000#; -- zlib.h:164 + -- for initializing zalloc, zfree, opaque + -- zlib.h:164 + type gzFile is new Voidp; -- zlib.h:646 + + type Z_Stream is private; + + type Z_Streamp is access all Z_Stream; -- zlib.h:89 + + type alloc_func is access function + (Opaque : Voidp; + Items : UInt; + Size : UInt) + return Voidp; -- zlib.h:63 + + type free_func is access procedure (opaque : Voidp; address : Voidp); + + function zlibVersion return Chars_Ptr; + + function Deflate (strm : Z_Streamp; flush : Int) return Int; + + function DeflateEnd (strm : Z_Streamp) return Int; + + function Inflate (strm : Z_Streamp; flush : Int) return Int; + + function InflateEnd (strm : Z_Streamp) return Int; + + function deflateSetDictionary + (strm : Z_Streamp; + dictionary : Byte_Access; + dictLength : UInt) + return Int; + + function deflateCopy (dest : Z_Streamp; source : Z_Streamp) return Int; + -- zlib.h:478 + + function deflateReset (strm : Z_Streamp) return Int; -- zlib.h:495 + + function deflateParams + (strm : Z_Streamp; + level : Int; + strategy : Int) + return Int; -- zlib.h:506 + + function inflateSetDictionary + (strm : Z_Streamp; + dictionary : Byte_Access; + dictLength : UInt) + return Int; -- zlib.h:548 + + function inflateSync (strm : Z_Streamp) return Int; -- zlib.h:565 + + function inflateReset (strm : Z_Streamp) return Int; -- zlib.h:580 + + function compress + (dest : Byte_Access; + destLen : ULong_Access; + source : Byte_Access; + sourceLen : ULong) + return Int; -- zlib.h:601 + + function compress2 + (dest : Byte_Access; + destLen : ULong_Access; + source : Byte_Access; + sourceLen : ULong; + level : Int) + return Int; -- zlib.h:615 + + function uncompress + (dest : Byte_Access; + destLen : ULong_Access; + source : Byte_Access; + sourceLen : ULong) + return Int; + + function gzopen (path : Chars_Ptr; mode : Chars_Ptr) return gzFile; + + function gzdopen (fd : Int; mode : Chars_Ptr) return gzFile; + + function gzsetparams + (file : gzFile; + level : Int; + strategy : Int) + return Int; + + function gzread + (file : gzFile; + buf : Voidp; + len : UInt) + return Int; + + function gzwrite + (file : in gzFile; + buf : in Voidp; + len : in UInt) + return Int; + + function gzprintf (file : in gzFile; format : in Chars_Ptr) return Int; + + function gzputs (file : in gzFile; s : in Chars_Ptr) return Int; + + function gzgets + (file : gzFile; + buf : Chars_Ptr; + len : Int) + return Chars_Ptr; + + function gzputc (file : gzFile; char : Int) return Int; + + function gzgetc (file : gzFile) return Int; + + function gzflush (file : gzFile; flush : Int) return Int; + + function gzseek + (file : gzFile; + offset : Int; + whence : Int) + return Int; + + function gzrewind (file : gzFile) return Int; + + function gztell (file : gzFile) return Int; + + function gzeof (file : gzFile) return Int; + + function gzclose (file : gzFile) return Int; + + function gzerror (file : gzFile; errnum : Int_Access) return Chars_Ptr; + + function adler32 + (adler : ULong; + buf : Byte_Access; + len : UInt) + return ULong; + + function crc32 + (crc : ULong; + buf : Byte_Access; + len : UInt) + return ULong; + + function deflateInit + (strm : Z_Streamp; + level : Int; + version : Chars_Ptr; + stream_size : Int) + return Int; + + function deflateInit2 + (strm : Z_Streamp; + level : Int; + method : Int; + windowBits : Int; + memLevel : Int; + strategy : Int; + version : Chars_Ptr; + stream_size : Int) + return Int; + + function Deflate_Init + (strm : Z_Streamp; + level : Int; + method : Int; + windowBits : Int; + memLevel : Int; + strategy : Int) + return Int; + pragma Inline (Deflate_Init); + + function inflateInit + (strm : Z_Streamp; + version : Chars_Ptr; + stream_size : Int) + return Int; + + function inflateInit2 + (strm : in Z_Streamp; + windowBits : in Int; + version : in Chars_Ptr; + stream_size : in Int) + return Int; + + function inflateBackInit + (strm : in Z_Streamp; + windowBits : in Int; + window : in Byte_Access; + version : in Chars_Ptr; + stream_size : in Int) + return Int; + -- Size of window have to be 2**windowBits. + + function Inflate_Init (strm : Z_Streamp; windowBits : Int) return Int; + pragma Inline (Inflate_Init); + + function zError (err : Int) return Chars_Ptr; + + function inflateSyncPoint (z : Z_Streamp) return Int; + + function get_crc_table return ULong_Access; + + -- Interface to the available fields of the z_stream structure. + -- The application must update next_in and avail_in when avail_in has + -- dropped to zero. It must update next_out and avail_out when avail_out + -- has dropped to zero. The application must initialize zalloc, zfree and + -- opaque before calling the init function. + + procedure Set_In + (Strm : in out Z_Stream; + Buffer : in Voidp; + Size : in UInt); + pragma Inline (Set_In); + + procedure Set_Out + (Strm : in out Z_Stream; + Buffer : in Voidp; + Size : in UInt); + pragma Inline (Set_Out); + + procedure Set_Mem_Func + (Strm : in out Z_Stream; + Opaque : in Voidp; + Alloc : in alloc_func; + Free : in free_func); + pragma Inline (Set_Mem_Func); + + function Last_Error_Message (Strm : in Z_Stream) return String; + pragma Inline (Last_Error_Message); + + function Avail_Out (Strm : in Z_Stream) return UInt; + pragma Inline (Avail_Out); + + function Avail_In (Strm : in Z_Stream) return UInt; + pragma Inline (Avail_In); + + function Total_In (Strm : in Z_Stream) return ULong; + pragma Inline (Total_In); + + function Total_Out (Strm : in Z_Stream) return ULong; + pragma Inline (Total_Out); + + function inflateCopy + (dest : in Z_Streamp; + Source : in Z_Streamp) + return Int; + + function compressBound (Source_Len : in ULong) return ULong; + + function deflateBound + (Strm : in Z_Streamp; + Source_Len : in ULong) + return ULong; + + function gzungetc (C : in Int; File : in gzFile) return Int; + + function zlibCompileFlags return ULong; + +private + + type Z_Stream is record -- zlib.h:68 + Next_In : Voidp := Nul; -- next input byte + Avail_In : UInt := 0; -- number of bytes available at next_in + Total_In : ULong := 0; -- total nb of input bytes read so far + Next_Out : Voidp := Nul; -- next output byte should be put there + Avail_Out : UInt := 0; -- remaining free space at next_out + Total_Out : ULong := 0; -- total nb of bytes output so far + msg : Chars_Ptr; -- last error message, NULL if no error + state : Voidp; -- not visible by applications + zalloc : alloc_func := null; -- used to allocate the internal state + zfree : free_func := null; -- used to free the internal state + opaque : Voidp; -- private data object passed to + -- zalloc and zfree + data_type : Int; -- best guess about the data type: + -- ascii or binary + adler : ULong; -- adler32 value of the uncompressed + -- data + reserved : ULong; -- reserved for future use + end record; + + pragma Convention (C, Z_Stream); + + pragma Import (C, zlibVersion, "zlibVersion"); + pragma Import (C, Deflate, "deflate"); + pragma Import (C, DeflateEnd, "deflateEnd"); + pragma Import (C, Inflate, "inflate"); + pragma Import (C, InflateEnd, "inflateEnd"); + pragma Import (C, deflateSetDictionary, "deflateSetDictionary"); + pragma Import (C, deflateCopy, "deflateCopy"); + pragma Import (C, deflateReset, "deflateReset"); + pragma Import (C, deflateParams, "deflateParams"); + pragma Import (C, inflateSetDictionary, "inflateSetDictionary"); + pragma Import (C, inflateSync, "inflateSync"); + pragma Import (C, inflateReset, "inflateReset"); + pragma Import (C, compress, "compress"); + pragma Import (C, compress2, "compress2"); + pragma Import (C, uncompress, "uncompress"); + pragma Import (C, gzopen, "gzopen"); + pragma Import (C, gzdopen, "gzdopen"); + pragma Import (C, gzsetparams, "gzsetparams"); + pragma Import (C, gzread, "gzread"); + pragma Import (C, gzwrite, "gzwrite"); + pragma Import (C, gzprintf, "gzprintf"); + pragma Import (C, gzputs, "gzputs"); + pragma Import (C, gzgets, "gzgets"); + pragma Import (C, gzputc, "gzputc"); + pragma Import (C, gzgetc, "gzgetc"); + pragma Import (C, gzflush, "gzflush"); + pragma Import (C, gzseek, "gzseek"); + pragma Import (C, gzrewind, "gzrewind"); + pragma Import (C, gztell, "gztell"); + pragma Import (C, gzeof, "gzeof"); + pragma Import (C, gzclose, "gzclose"); + pragma Import (C, gzerror, "gzerror"); + pragma Import (C, adler32, "adler32"); + pragma Import (C, crc32, "crc32"); + pragma Import (C, deflateInit, "deflateInit_"); + pragma Import (C, inflateInit, "inflateInit_"); + pragma Import (C, deflateInit2, "deflateInit2_"); + pragma Import (C, inflateInit2, "inflateInit2_"); + pragma Import (C, zError, "zError"); + pragma Import (C, inflateSyncPoint, "inflateSyncPoint"); + pragma Import (C, get_crc_table, "get_crc_table"); + + -- since zlib 1.2.0: + + pragma Import (C, inflateCopy, "inflateCopy"); + pragma Import (C, compressBound, "compressBound"); + pragma Import (C, deflateBound, "deflateBound"); + pragma Import (C, gzungetc, "gzungetc"); + pragma Import (C, zlibCompileFlags, "zlibCompileFlags"); + + pragma Import (C, inflateBackInit, "inflateBackInit_"); + + -- I stopped binding the inflateBack routines, becouse realize that + -- it does not support zlib and gzip headers for now, and have no + -- symmetric deflateBack routines. + -- ZLib-Ada is symmetric regarding deflate/inflate data transformation + -- and has a similar generic callback interface for the + -- deflate/inflate transformation based on the regular Deflate/Inflate + -- routines. + + -- pragma Import (C, inflateBack, "inflateBack"); + -- pragma Import (C, inflateBackEnd, "inflateBackEnd"); + +end ZLib.Thin; diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/ada/zlib.adb b/software/scsi2sd-util/zlib-1.2.8/contrib/ada/zlib.adb new file mode 100644 index 0000000..8b6fd68 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/ada/zlib.adb @@ -0,0 +1,701 @@ +---------------------------------------------------------------- +-- ZLib for Ada thick binding. -- +-- -- +-- Copyright (C) 2002-2004 Dmitriy Anisimkov -- +-- -- +-- Open source license information is in the zlib.ads file. -- +---------------------------------------------------------------- + +-- $Id: zlib.adb,v 1.31 2004/09/06 06:53:19 vagul Exp $ + +with Ada.Exceptions; +with Ada.Unchecked_Conversion; +with Ada.Unchecked_Deallocation; + +with Interfaces.C.Strings; + +with ZLib.Thin; + +package body ZLib is + + use type Thin.Int; + + type Z_Stream is new Thin.Z_Stream; + + type Return_Code_Enum is + (OK, + STREAM_END, + NEED_DICT, + ERRNO, + STREAM_ERROR, + DATA_ERROR, + MEM_ERROR, + BUF_ERROR, + VERSION_ERROR); + + type Flate_Step_Function is access + function (Strm : in Thin.Z_Streamp; Flush : in Thin.Int) return Thin.Int; + pragma Convention (C, Flate_Step_Function); + + type Flate_End_Function is access + function (Ctrm : in Thin.Z_Streamp) return Thin.Int; + pragma Convention (C, Flate_End_Function); + + type Flate_Type is record + Step : Flate_Step_Function; + Done : Flate_End_Function; + end record; + + subtype Footer_Array is Stream_Element_Array (1 .. 8); + + Simple_GZip_Header : constant Stream_Element_Array (1 .. 10) + := (16#1f#, 16#8b#, -- Magic header + 16#08#, -- Z_DEFLATED + 16#00#, -- Flags + 16#00#, 16#00#, 16#00#, 16#00#, -- Time + 16#00#, -- XFlags + 16#03# -- OS code + ); + -- The simplest gzip header is not for informational, but just for + -- gzip format compatibility. + -- Note that some code below is using assumption + -- Simple_GZip_Header'Last > Footer_Array'Last, so do not make + -- Simple_GZip_Header'Last <= Footer_Array'Last. + + Return_Code : constant array (Thin.Int range <>) of Return_Code_Enum + := (0 => OK, + 1 => STREAM_END, + 2 => NEED_DICT, + -1 => ERRNO, + -2 => STREAM_ERROR, + -3 => DATA_ERROR, + -4 => MEM_ERROR, + -5 => BUF_ERROR, + -6 => VERSION_ERROR); + + Flate : constant array (Boolean) of Flate_Type + := (True => (Step => Thin.Deflate'Access, + Done => Thin.DeflateEnd'Access), + False => (Step => Thin.Inflate'Access, + Done => Thin.InflateEnd'Access)); + + Flush_Finish : constant array (Boolean) of Flush_Mode + := (True => Finish, False => No_Flush); + + procedure Raise_Error (Stream : in Z_Stream); + pragma Inline (Raise_Error); + + procedure Raise_Error (Message : in String); + pragma Inline (Raise_Error); + + procedure Check_Error (Stream : in Z_Stream; Code : in Thin.Int); + + procedure Free is new Ada.Unchecked_Deallocation + (Z_Stream, Z_Stream_Access); + + function To_Thin_Access is new Ada.Unchecked_Conversion + (Z_Stream_Access, Thin.Z_Streamp); + + procedure Translate_GZip + (Filter : in out Filter_Type; + In_Data : in Ada.Streams.Stream_Element_Array; + In_Last : out Ada.Streams.Stream_Element_Offset; + Out_Data : out Ada.Streams.Stream_Element_Array; + Out_Last : out Ada.Streams.Stream_Element_Offset; + Flush : in Flush_Mode); + -- Separate translate routine for make gzip header. + + procedure Translate_Auto + (Filter : in out Filter_Type; + In_Data : in Ada.Streams.Stream_Element_Array; + In_Last : out Ada.Streams.Stream_Element_Offset; + Out_Data : out Ada.Streams.Stream_Element_Array; + Out_Last : out Ada.Streams.Stream_Element_Offset; + Flush : in Flush_Mode); + -- translate routine without additional headers. + + ----------------- + -- Check_Error -- + ----------------- + + procedure Check_Error (Stream : in Z_Stream; Code : in Thin.Int) is + use type Thin.Int; + begin + if Code /= Thin.Z_OK then + Raise_Error + (Return_Code_Enum'Image (Return_Code (Code)) + & ": " & Last_Error_Message (Stream)); + end if; + end Check_Error; + + ----------- + -- Close -- + ----------- + + procedure Close + (Filter : in out Filter_Type; + Ignore_Error : in Boolean := False) + is + Code : Thin.Int; + begin + if not Ignore_Error and then not Is_Open (Filter) then + raise Status_Error; + end if; + + Code := Flate (Filter.Compression).Done (To_Thin_Access (Filter.Strm)); + + if Ignore_Error or else Code = Thin.Z_OK then + Free (Filter.Strm); + else + declare + Error_Message : constant String + := Last_Error_Message (Filter.Strm.all); + begin + Free (Filter.Strm); + Ada.Exceptions.Raise_Exception + (ZLib_Error'Identity, + Return_Code_Enum'Image (Return_Code (Code)) + & ": " & Error_Message); + end; + end if; + end Close; + + ----------- + -- CRC32 -- + ----------- + + function CRC32 + (CRC : in Unsigned_32; + Data : in Ada.Streams.Stream_Element_Array) + return Unsigned_32 + is + use Thin; + begin + return Unsigned_32 (crc32 (ULong (CRC), + Data'Address, + Data'Length)); + end CRC32; + + procedure CRC32 + (CRC : in out Unsigned_32; + Data : in Ada.Streams.Stream_Element_Array) is + begin + CRC := CRC32 (CRC, Data); + end CRC32; + + ------------------ + -- Deflate_Init -- + ------------------ + + procedure Deflate_Init + (Filter : in out Filter_Type; + Level : in Compression_Level := Default_Compression; + Strategy : in Strategy_Type := Default_Strategy; + Method : in Compression_Method := Deflated; + Window_Bits : in Window_Bits_Type := Default_Window_Bits; + Memory_Level : in Memory_Level_Type := Default_Memory_Level; + Header : in Header_Type := Default) + is + use type Thin.Int; + Win_Bits : Thin.Int := Thin.Int (Window_Bits); + begin + if Is_Open (Filter) then + raise Status_Error; + end if; + + -- We allow ZLib to make header only in case of default header type. + -- Otherwise we would either do header by ourselfs, or do not do + -- header at all. + + if Header = None or else Header = GZip then + Win_Bits := -Win_Bits; + end if; + + -- For the GZip CRC calculation and make headers. + + if Header = GZip then + Filter.CRC := 0; + Filter.Offset := Simple_GZip_Header'First; + else + Filter.Offset := Simple_GZip_Header'Last + 1; + end if; + + Filter.Strm := new Z_Stream; + Filter.Compression := True; + Filter.Stream_End := False; + Filter.Header := Header; + + if Thin.Deflate_Init + (To_Thin_Access (Filter.Strm), + Level => Thin.Int (Level), + method => Thin.Int (Method), + windowBits => Win_Bits, + memLevel => Thin.Int (Memory_Level), + strategy => Thin.Int (Strategy)) /= Thin.Z_OK + then + Raise_Error (Filter.Strm.all); + end if; + end Deflate_Init; + + ----------- + -- Flush -- + ----------- + + procedure Flush + (Filter : in out Filter_Type; + Out_Data : out Ada.Streams.Stream_Element_Array; + Out_Last : out Ada.Streams.Stream_Element_Offset; + Flush : in Flush_Mode) + is + No_Data : Stream_Element_Array := (1 .. 0 => 0); + Last : Stream_Element_Offset; + begin + Translate (Filter, No_Data, Last, Out_Data, Out_Last, Flush); + end Flush; + + ----------------------- + -- Generic_Translate -- + ----------------------- + + procedure Generic_Translate + (Filter : in out ZLib.Filter_Type; + In_Buffer_Size : in Integer := Default_Buffer_Size; + Out_Buffer_Size : in Integer := Default_Buffer_Size) + is + In_Buffer : Stream_Element_Array + (1 .. Stream_Element_Offset (In_Buffer_Size)); + Out_Buffer : Stream_Element_Array + (1 .. Stream_Element_Offset (Out_Buffer_Size)); + Last : Stream_Element_Offset; + In_Last : Stream_Element_Offset; + In_First : Stream_Element_Offset; + Out_Last : Stream_Element_Offset; + begin + Main : loop + Data_In (In_Buffer, Last); + + In_First := In_Buffer'First; + + loop + Translate + (Filter => Filter, + In_Data => In_Buffer (In_First .. Last), + In_Last => In_Last, + Out_Data => Out_Buffer, + Out_Last => Out_Last, + Flush => Flush_Finish (Last < In_Buffer'First)); + + if Out_Buffer'First <= Out_Last then + Data_Out (Out_Buffer (Out_Buffer'First .. Out_Last)); + end if; + + exit Main when Stream_End (Filter); + + -- The end of in buffer. + + exit when In_Last = Last; + + In_First := In_Last + 1; + end loop; + end loop Main; + + end Generic_Translate; + + ------------------ + -- Inflate_Init -- + ------------------ + + procedure Inflate_Init + (Filter : in out Filter_Type; + Window_Bits : in Window_Bits_Type := Default_Window_Bits; + Header : in Header_Type := Default) + is + use type Thin.Int; + Win_Bits : Thin.Int := Thin.Int (Window_Bits); + + procedure Check_Version; + -- Check the latest header types compatibility. + + procedure Check_Version is + begin + if Version <= "1.1.4" then + Raise_Error + ("Inflate header type " & Header_Type'Image (Header) + & " incompatible with ZLib version " & Version); + end if; + end Check_Version; + + begin + if Is_Open (Filter) then + raise Status_Error; + end if; + + case Header is + when None => + Check_Version; + + -- Inflate data without headers determined + -- by negative Win_Bits. + + Win_Bits := -Win_Bits; + when GZip => + Check_Version; + + -- Inflate gzip data defined by flag 16. + + Win_Bits := Win_Bits + 16; + when Auto => + Check_Version; + + -- Inflate with automatic detection + -- of gzip or native header defined by flag 32. + + Win_Bits := Win_Bits + 32; + when Default => null; + end case; + + Filter.Strm := new Z_Stream; + Filter.Compression := False; + Filter.Stream_End := False; + Filter.Header := Header; + + if Thin.Inflate_Init + (To_Thin_Access (Filter.Strm), Win_Bits) /= Thin.Z_OK + then + Raise_Error (Filter.Strm.all); + end if; + end Inflate_Init; + + ------------- + -- Is_Open -- + ------------- + + function Is_Open (Filter : in Filter_Type) return Boolean is + begin + return Filter.Strm /= null; + end Is_Open; + + ----------------- + -- Raise_Error -- + ----------------- + + procedure Raise_Error (Message : in String) is + begin + Ada.Exceptions.Raise_Exception (ZLib_Error'Identity, Message); + end Raise_Error; + + procedure Raise_Error (Stream : in Z_Stream) is + begin + Raise_Error (Last_Error_Message (Stream)); + end Raise_Error; + + ---------- + -- Read -- + ---------- + + procedure Read + (Filter : in out Filter_Type; + Item : out Ada.Streams.Stream_Element_Array; + Last : out Ada.Streams.Stream_Element_Offset; + Flush : in Flush_Mode := No_Flush) + is + In_Last : Stream_Element_Offset; + Item_First : Ada.Streams.Stream_Element_Offset := Item'First; + V_Flush : Flush_Mode := Flush; + + begin + pragma Assert (Rest_First in Buffer'First .. Buffer'Last + 1); + pragma Assert (Rest_Last in Buffer'First - 1 .. Buffer'Last); + + loop + if Rest_Last = Buffer'First - 1 then + V_Flush := Finish; + + elsif Rest_First > Rest_Last then + Read (Buffer, Rest_Last); + Rest_First := Buffer'First; + + if Rest_Last < Buffer'First then + V_Flush := Finish; + end if; + end if; + + Translate + (Filter => Filter, + In_Data => Buffer (Rest_First .. Rest_Last), + In_Last => In_Last, + Out_Data => Item (Item_First .. Item'Last), + Out_Last => Last, + Flush => V_Flush); + + Rest_First := In_Last + 1; + + exit when Stream_End (Filter) + or else Last = Item'Last + or else (Last >= Item'First and then Allow_Read_Some); + + Item_First := Last + 1; + end loop; + end Read; + + ---------------- + -- Stream_End -- + ---------------- + + function Stream_End (Filter : in Filter_Type) return Boolean is + begin + if Filter.Header = GZip and Filter.Compression then + return Filter.Stream_End + and then Filter.Offset = Footer_Array'Last + 1; + else + return Filter.Stream_End; + end if; + end Stream_End; + + -------------- + -- Total_In -- + -------------- + + function Total_In (Filter : in Filter_Type) return Count is + begin + return Count (Thin.Total_In (To_Thin_Access (Filter.Strm).all)); + end Total_In; + + --------------- + -- Total_Out -- + --------------- + + function Total_Out (Filter : in Filter_Type) return Count is + begin + return Count (Thin.Total_Out (To_Thin_Access (Filter.Strm).all)); + end Total_Out; + + --------------- + -- Translate -- + --------------- + + procedure Translate + (Filter : in out Filter_Type; + In_Data : in Ada.Streams.Stream_Element_Array; + In_Last : out Ada.Streams.Stream_Element_Offset; + Out_Data : out Ada.Streams.Stream_Element_Array; + Out_Last : out Ada.Streams.Stream_Element_Offset; + Flush : in Flush_Mode) is + begin + if Filter.Header = GZip and then Filter.Compression then + Translate_GZip + (Filter => Filter, + In_Data => In_Data, + In_Last => In_Last, + Out_Data => Out_Data, + Out_Last => Out_Last, + Flush => Flush); + else + Translate_Auto + (Filter => Filter, + In_Data => In_Data, + In_Last => In_Last, + Out_Data => Out_Data, + Out_Last => Out_Last, + Flush => Flush); + end if; + end Translate; + + -------------------- + -- Translate_Auto -- + -------------------- + + procedure Translate_Auto + (Filter : in out Filter_Type; + In_Data : in Ada.Streams.Stream_Element_Array; + In_Last : out Ada.Streams.Stream_Element_Offset; + Out_Data : out Ada.Streams.Stream_Element_Array; + Out_Last : out Ada.Streams.Stream_Element_Offset; + Flush : in Flush_Mode) + is + use type Thin.Int; + Code : Thin.Int; + + begin + if not Is_Open (Filter) then + raise Status_Error; + end if; + + if Out_Data'Length = 0 and then In_Data'Length = 0 then + raise Constraint_Error; + end if; + + Set_Out (Filter.Strm.all, Out_Data'Address, Out_Data'Length); + Set_In (Filter.Strm.all, In_Data'Address, In_Data'Length); + + Code := Flate (Filter.Compression).Step + (To_Thin_Access (Filter.Strm), + Thin.Int (Flush)); + + if Code = Thin.Z_STREAM_END then + Filter.Stream_End := True; + else + Check_Error (Filter.Strm.all, Code); + end if; + + In_Last := In_Data'Last + - Stream_Element_Offset (Avail_In (Filter.Strm.all)); + Out_Last := Out_Data'Last + - Stream_Element_Offset (Avail_Out (Filter.Strm.all)); + end Translate_Auto; + + -------------------- + -- Translate_GZip -- + -------------------- + + procedure Translate_GZip + (Filter : in out Filter_Type; + In_Data : in Ada.Streams.Stream_Element_Array; + In_Last : out Ada.Streams.Stream_Element_Offset; + Out_Data : out Ada.Streams.Stream_Element_Array; + Out_Last : out Ada.Streams.Stream_Element_Offset; + Flush : in Flush_Mode) + is + Out_First : Stream_Element_Offset; + + procedure Add_Data (Data : in Stream_Element_Array); + -- Add data to stream from the Filter.Offset till necessary, + -- used for add gzip headr/footer. + + procedure Put_32 + (Item : in out Stream_Element_Array; + Data : in Unsigned_32); + pragma Inline (Put_32); + + -------------- + -- Add_Data -- + -------------- + + procedure Add_Data (Data : in Stream_Element_Array) is + Data_First : Stream_Element_Offset renames Filter.Offset; + Data_Last : Stream_Element_Offset; + Data_Len : Stream_Element_Offset; -- -1 + Out_Len : Stream_Element_Offset; -- -1 + begin + Out_First := Out_Last + 1; + + if Data_First > Data'Last then + return; + end if; + + Data_Len := Data'Last - Data_First; + Out_Len := Out_Data'Last - Out_First; + + if Data_Len <= Out_Len then + Out_Last := Out_First + Data_Len; + Data_Last := Data'Last; + else + Out_Last := Out_Data'Last; + Data_Last := Data_First + Out_Len; + end if; + + Out_Data (Out_First .. Out_Last) := Data (Data_First .. Data_Last); + + Data_First := Data_Last + 1; + Out_First := Out_Last + 1; + end Add_Data; + + ------------ + -- Put_32 -- + ------------ + + procedure Put_32 + (Item : in out Stream_Element_Array; + Data : in Unsigned_32) + is + D : Unsigned_32 := Data; + begin + for J in Item'First .. Item'First + 3 loop + Item (J) := Stream_Element (D and 16#FF#); + D := Shift_Right (D, 8); + end loop; + end Put_32; + + begin + Out_Last := Out_Data'First - 1; + + if not Filter.Stream_End then + Add_Data (Simple_GZip_Header); + + Translate_Auto + (Filter => Filter, + In_Data => In_Data, + In_Last => In_Last, + Out_Data => Out_Data (Out_First .. Out_Data'Last), + Out_Last => Out_Last, + Flush => Flush); + + CRC32 (Filter.CRC, In_Data (In_Data'First .. In_Last)); + end if; + + if Filter.Stream_End and then Out_Last <= Out_Data'Last then + -- This detection method would work only when + -- Simple_GZip_Header'Last > Footer_Array'Last + + if Filter.Offset = Simple_GZip_Header'Last + 1 then + Filter.Offset := Footer_Array'First; + end if; + + declare + Footer : Footer_Array; + begin + Put_32 (Footer, Filter.CRC); + Put_32 (Footer (Footer'First + 4 .. Footer'Last), + Unsigned_32 (Total_In (Filter))); + Add_Data (Footer); + end; + end if; + end Translate_GZip; + + ------------- + -- Version -- + ------------- + + function Version return String is + begin + return Interfaces.C.Strings.Value (Thin.zlibVersion); + end Version; + + ----------- + -- Write -- + ----------- + + procedure Write + (Filter : in out Filter_Type; + Item : in Ada.Streams.Stream_Element_Array; + Flush : in Flush_Mode := No_Flush) + is + Buffer : Stream_Element_Array (1 .. Buffer_Size); + In_Last : Stream_Element_Offset; + Out_Last : Stream_Element_Offset; + In_First : Stream_Element_Offset := Item'First; + begin + if Item'Length = 0 and Flush = No_Flush then + return; + end if; + + loop + Translate + (Filter => Filter, + In_Data => Item (In_First .. Item'Last), + In_Last => In_Last, + Out_Data => Buffer, + Out_Last => Out_Last, + Flush => Flush); + + if Out_Last >= Buffer'First then + Write (Buffer (1 .. Out_Last)); + end if; + + exit when In_Last = Item'Last or Stream_End (Filter); + + In_First := In_Last + 1; + end loop; + end Write; + +end ZLib; diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/ada/zlib.ads b/software/scsi2sd-util/zlib-1.2.8/contrib/ada/zlib.ads new file mode 100644 index 0000000..79ffc40 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/ada/zlib.ads @@ -0,0 +1,328 @@ +------------------------------------------------------------------------------ +-- ZLib for Ada thick binding. -- +-- -- +-- Copyright (C) 2002-2004 Dmitriy Anisimkov -- +-- -- +-- This library is free software; you can redistribute it and/or modify -- +-- it under the terms of the GNU General Public License as published by -- +-- the Free Software Foundation; either version 2 of the License, or (at -- +-- your option) any later version. -- +-- -- +-- This library is distributed in the hope that it will be useful, but -- +-- WITHOUT ANY WARRANTY; without even the implied warranty of -- +-- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -- +-- General Public License for more details. -- +-- -- +-- You should have received a copy of the GNU General Public License -- +-- along with this library; if not, write to the Free Software Foundation, -- +-- Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -- +-- -- +-- As a special exception, if other files instantiate generics from this -- +-- unit, or you link this unit with other files to produce an executable, -- +-- this unit does not by itself cause the resulting executable to be -- +-- covered by the GNU General Public License. This exception does not -- +-- however invalidate any other reasons why the executable file might be -- +-- covered by the GNU Public License. -- +------------------------------------------------------------------------------ + +-- $Id: zlib.ads,v 1.26 2004/09/06 06:53:19 vagul Exp $ + +with Ada.Streams; + +with Interfaces; + +package ZLib is + + ZLib_Error : exception; + Status_Error : exception; + + type Compression_Level is new Integer range -1 .. 9; + + type Flush_Mode is private; + + type Compression_Method is private; + + type Window_Bits_Type is new Integer range 8 .. 15; + + type Memory_Level_Type is new Integer range 1 .. 9; + + type Unsigned_32 is new Interfaces.Unsigned_32; + + type Strategy_Type is private; + + type Header_Type is (None, Auto, Default, GZip); + -- Header type usage have a some limitation for inflate. + -- See comment for Inflate_Init. + + subtype Count is Ada.Streams.Stream_Element_Count; + + Default_Memory_Level : constant Memory_Level_Type := 8; + Default_Window_Bits : constant Window_Bits_Type := 15; + + ---------------------------------- + -- Compression method constants -- + ---------------------------------- + + Deflated : constant Compression_Method; + -- Only one method allowed in this ZLib version + + --------------------------------- + -- Compression level constants -- + --------------------------------- + + No_Compression : constant Compression_Level := 0; + Best_Speed : constant Compression_Level := 1; + Best_Compression : constant Compression_Level := 9; + Default_Compression : constant Compression_Level := -1; + + -------------------------- + -- Flush mode constants -- + -------------------------- + + No_Flush : constant Flush_Mode; + -- Regular way for compression, no flush + + Partial_Flush : constant Flush_Mode; + -- Will be removed, use Z_SYNC_FLUSH instead + + Sync_Flush : constant Flush_Mode; + -- All pending output is flushed to the output buffer and the output + -- is aligned on a byte boundary, so that the decompressor can get all + -- input data available so far. (In particular avail_in is zero after the + -- call if enough output space has been provided before the call.) + -- Flushing may degrade compression for some compression algorithms and so + -- it should be used only when necessary. + + Block_Flush : constant Flush_Mode; + -- Z_BLOCK requests that inflate() stop + -- if and when it get to the next deflate block boundary. When decoding the + -- zlib or gzip format, this will cause inflate() to return immediately + -- after the header and before the first block. When doing a raw inflate, + -- inflate() will go ahead and process the first block, and will return + -- when it gets to the end of that block, or when it runs out of data. + + Full_Flush : constant Flush_Mode; + -- All output is flushed as with SYNC_FLUSH, and the compression state + -- is reset so that decompression can restart from this point if previous + -- compressed data has been damaged or if random access is desired. Using + -- Full_Flush too often can seriously degrade the compression. + + Finish : constant Flush_Mode; + -- Just for tell the compressor that input data is complete. + + ------------------------------------ + -- Compression strategy constants -- + ------------------------------------ + + -- RLE stategy could be used only in version 1.2.0 and later. + + Filtered : constant Strategy_Type; + Huffman_Only : constant Strategy_Type; + RLE : constant Strategy_Type; + Default_Strategy : constant Strategy_Type; + + Default_Buffer_Size : constant := 4096; + + type Filter_Type is tagged limited private; + -- The filter is for compression and for decompression. + -- The usage of the type is depend of its initialization. + + function Version return String; + pragma Inline (Version); + -- Return string representation of the ZLib version. + + procedure Deflate_Init + (Filter : in out Filter_Type; + Level : in Compression_Level := Default_Compression; + Strategy : in Strategy_Type := Default_Strategy; + Method : in Compression_Method := Deflated; + Window_Bits : in Window_Bits_Type := Default_Window_Bits; + Memory_Level : in Memory_Level_Type := Default_Memory_Level; + Header : in Header_Type := Default); + -- Compressor initialization. + -- When Header parameter is Auto or Default, then default zlib header + -- would be provided for compressed data. + -- When Header is GZip, then gzip header would be set instead of + -- default header. + -- When Header is None, no header would be set for compressed data. + + procedure Inflate_Init + (Filter : in out Filter_Type; + Window_Bits : in Window_Bits_Type := Default_Window_Bits; + Header : in Header_Type := Default); + -- Decompressor initialization. + -- Default header type mean that ZLib default header is expecting in the + -- input compressed stream. + -- Header type None mean that no header is expecting in the input stream. + -- GZip header type mean that GZip header is expecting in the + -- input compressed stream. + -- Auto header type mean that header type (GZip or Native) would be + -- detected automatically in the input stream. + -- Note that header types parameter values None, GZip and Auto are + -- supported for inflate routine only in ZLib versions 1.2.0.2 and later. + -- Deflate_Init is supporting all header types. + + function Is_Open (Filter : in Filter_Type) return Boolean; + pragma Inline (Is_Open); + -- Is the filter opened for compression or decompression. + + procedure Close + (Filter : in out Filter_Type; + Ignore_Error : in Boolean := False); + -- Closing the compression or decompressor. + -- If stream is closing before the complete and Ignore_Error is False, + -- The exception would be raised. + + generic + with procedure Data_In + (Item : out Ada.Streams.Stream_Element_Array; + Last : out Ada.Streams.Stream_Element_Offset); + with procedure Data_Out + (Item : in Ada.Streams.Stream_Element_Array); + procedure Generic_Translate + (Filter : in out Filter_Type; + In_Buffer_Size : in Integer := Default_Buffer_Size; + Out_Buffer_Size : in Integer := Default_Buffer_Size); + -- Compress/decompress data fetch from Data_In routine and pass the result + -- to the Data_Out routine. User should provide Data_In and Data_Out + -- for compression/decompression data flow. + -- Compression or decompression depend on Filter initialization. + + function Total_In (Filter : in Filter_Type) return Count; + pragma Inline (Total_In); + -- Returns total number of input bytes read so far + + function Total_Out (Filter : in Filter_Type) return Count; + pragma Inline (Total_Out); + -- Returns total number of bytes output so far + + function CRC32 + (CRC : in Unsigned_32; + Data : in Ada.Streams.Stream_Element_Array) + return Unsigned_32; + pragma Inline (CRC32); + -- Compute CRC32, it could be necessary for make gzip format + + procedure CRC32 + (CRC : in out Unsigned_32; + Data : in Ada.Streams.Stream_Element_Array); + pragma Inline (CRC32); + -- Compute CRC32, it could be necessary for make gzip format + + ------------------------------------------------- + -- Below is more complex low level routines. -- + ------------------------------------------------- + + procedure Translate + (Filter : in out Filter_Type; + In_Data : in Ada.Streams.Stream_Element_Array; + In_Last : out Ada.Streams.Stream_Element_Offset; + Out_Data : out Ada.Streams.Stream_Element_Array; + Out_Last : out Ada.Streams.Stream_Element_Offset; + Flush : in Flush_Mode); + -- Compress/decompress the In_Data buffer and place the result into + -- Out_Data. In_Last is the index of last element from In_Data accepted by + -- the Filter. Out_Last is the last element of the received data from + -- Filter. To tell the filter that incoming data are complete put the + -- Flush parameter to Finish. + + function Stream_End (Filter : in Filter_Type) return Boolean; + pragma Inline (Stream_End); + -- Return the true when the stream is complete. + + procedure Flush + (Filter : in out Filter_Type; + Out_Data : out Ada.Streams.Stream_Element_Array; + Out_Last : out Ada.Streams.Stream_Element_Offset; + Flush : in Flush_Mode); + pragma Inline (Flush); + -- Flushing the data from the compressor. + + generic + with procedure Write + (Item : in Ada.Streams.Stream_Element_Array); + -- User should provide this routine for accept + -- compressed/decompressed data. + + Buffer_Size : in Ada.Streams.Stream_Element_Offset + := Default_Buffer_Size; + -- Buffer size for Write user routine. + + procedure Write + (Filter : in out Filter_Type; + Item : in Ada.Streams.Stream_Element_Array; + Flush : in Flush_Mode := No_Flush); + -- Compress/Decompress data from Item to the generic parameter procedure + -- Write. Output buffer size could be set in Buffer_Size generic parameter. + + generic + with procedure Read + (Item : out Ada.Streams.Stream_Element_Array; + Last : out Ada.Streams.Stream_Element_Offset); + -- User should provide data for compression/decompression + -- thru this routine. + + Buffer : in out Ada.Streams.Stream_Element_Array; + -- Buffer for keep remaining data from the previous + -- back read. + + Rest_First, Rest_Last : in out Ada.Streams.Stream_Element_Offset; + -- Rest_First have to be initialized to Buffer'Last + 1 + -- Rest_Last have to be initialized to Buffer'Last + -- before usage. + + Allow_Read_Some : in Boolean := False; + -- Is it allowed to return Last < Item'Last before end of data. + + procedure Read + (Filter : in out Filter_Type; + Item : out Ada.Streams.Stream_Element_Array; + Last : out Ada.Streams.Stream_Element_Offset; + Flush : in Flush_Mode := No_Flush); + -- Compress/Decompress data from generic parameter procedure Read to the + -- Item. User should provide Buffer and initialized Rest_First, Rest_Last + -- indicators. If Allow_Read_Some is True, Read routines could return + -- Last < Item'Last only at end of stream. + +private + + use Ada.Streams; + + pragma Assert (Ada.Streams.Stream_Element'Size = 8); + pragma Assert (Ada.Streams.Stream_Element'Modulus = 2**8); + + type Flush_Mode is new Integer range 0 .. 5; + + type Compression_Method is new Integer range 8 .. 8; + + type Strategy_Type is new Integer range 0 .. 3; + + No_Flush : constant Flush_Mode := 0; + Partial_Flush : constant Flush_Mode := 1; + Sync_Flush : constant Flush_Mode := 2; + Full_Flush : constant Flush_Mode := 3; + Finish : constant Flush_Mode := 4; + Block_Flush : constant Flush_Mode := 5; + + Filtered : constant Strategy_Type := 1; + Huffman_Only : constant Strategy_Type := 2; + RLE : constant Strategy_Type := 3; + Default_Strategy : constant Strategy_Type := 0; + + Deflated : constant Compression_Method := 8; + + type Z_Stream; + + type Z_Stream_Access is access all Z_Stream; + + type Filter_Type is tagged limited record + Strm : Z_Stream_Access; + Compression : Boolean; + Stream_End : Boolean; + Header : Header_Type; + CRC : Unsigned_32; + Offset : Stream_Element_Offset; + -- Offset for gzip header/footer output. + end record; + +end ZLib; diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/ada/zlib.gpr b/software/scsi2sd-util/zlib-1.2.8/contrib/ada/zlib.gpr new file mode 100644 index 0000000..296b22a --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/ada/zlib.gpr @@ -0,0 +1,20 @@ +project Zlib is + + for Languages use ("Ada"); + for Source_Dirs use ("."); + for Object_Dir use "."; + for Main use ("test.adb", "mtest.adb", "read.adb", "buffer_demo"); + + package Compiler is + for Default_Switches ("ada") use ("-gnatwcfilopru", "-gnatVcdfimorst", "-gnatyabcefhiklmnoprst"); + end Compiler; + + package Linker is + for Default_Switches ("ada") use ("-lz"); + end Linker; + + package Builder is + for Default_Switches ("ada") use ("-s", "-gnatQ"); + end Builder; + +end Zlib; diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/amd64/amd64-match.S b/software/scsi2sd-util/zlib-1.2.8/contrib/amd64/amd64-match.S new file mode 100644 index 0000000..81d4a1c --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/amd64/amd64-match.S @@ -0,0 +1,452 @@ +/* + * match.S -- optimized version of longest_match() + * based on the similar work by Gilles Vollant, and Brian Raiter, written 1998 + * + * This is free software; you can redistribute it and/or modify it + * under the terms of the BSD License. Use by owners of Che Guevarra + * parafernalia is prohibited, where possible, and highly discouraged + * elsewhere. + */ + +#ifndef NO_UNDERLINE +# define match_init _match_init +# define longest_match _longest_match +#endif + +#define scanend ebx +#define scanendw bx +#define chainlenwmask edx /* high word: current chain len low word: s->wmask */ +#define curmatch rsi +#define curmatchd esi +#define windowbestlen r8 +#define scanalign r9 +#define scanalignd r9d +#define window r10 +#define bestlen r11 +#define bestlend r11d +#define scanstart r12d +#define scanstartw r12w +#define scan r13 +#define nicematch r14d +#define limit r15 +#define limitd r15d +#define prev rcx + +/* + * The 258 is a "magic number, not a parameter -- changing it + * breaks the hell loose + */ +#define MAX_MATCH (258) +#define MIN_MATCH (3) +#define MIN_LOOKAHEAD (MAX_MATCH + MIN_MATCH + 1) +#define MAX_MATCH_8 ((MAX_MATCH + 7) & ~7) + +/* stack frame offsets */ +#define LocalVarsSize (112) +#define _chainlenwmask ( 8-LocalVarsSize)(%rsp) +#define _windowbestlen (16-LocalVarsSize)(%rsp) +#define save_r14 (24-LocalVarsSize)(%rsp) +#define save_rsi (32-LocalVarsSize)(%rsp) +#define save_rbx (40-LocalVarsSize)(%rsp) +#define save_r12 (56-LocalVarsSize)(%rsp) +#define save_r13 (64-LocalVarsSize)(%rsp) +#define save_r15 (80-LocalVarsSize)(%rsp) + + +.globl match_init, longest_match + +/* + * On AMD64 the first argument of a function (in our case -- the pointer to + * deflate_state structure) is passed in %rdi, hence our offsets below are + * all off of that. + */ + +/* you can check the structure offset by running + +#include +#include +#include "deflate.h" + +void print_depl() +{ +deflate_state ds; +deflate_state *s=&ds; +printf("size pointer=%u\n",(int)sizeof(void*)); + +printf("#define dsWSize (%3u)(%%rdi)\n",(int)(((char*)&(s->w_size))-((char*)s))); +printf("#define dsWMask (%3u)(%%rdi)\n",(int)(((char*)&(s->w_mask))-((char*)s))); +printf("#define dsWindow (%3u)(%%rdi)\n",(int)(((char*)&(s->window))-((char*)s))); +printf("#define dsPrev (%3u)(%%rdi)\n",(int)(((char*)&(s->prev))-((char*)s))); +printf("#define dsMatchLen (%3u)(%%rdi)\n",(int)(((char*)&(s->match_length))-((char*)s))); +printf("#define dsPrevMatch (%3u)(%%rdi)\n",(int)(((char*)&(s->prev_match))-((char*)s))); +printf("#define dsStrStart (%3u)(%%rdi)\n",(int)(((char*)&(s->strstart))-((char*)s))); +printf("#define dsMatchStart (%3u)(%%rdi)\n",(int)(((char*)&(s->match_start))-((char*)s))); +printf("#define dsLookahead (%3u)(%%rdi)\n",(int)(((char*)&(s->lookahead))-((char*)s))); +printf("#define dsPrevLen (%3u)(%%rdi)\n",(int)(((char*)&(s->prev_length))-((char*)s))); +printf("#define dsMaxChainLen (%3u)(%%rdi)\n",(int)(((char*)&(s->max_chain_length))-((char*)s))); +printf("#define dsGoodMatch (%3u)(%%rdi)\n",(int)(((char*)&(s->good_match))-((char*)s))); +printf("#define dsNiceMatch (%3u)(%%rdi)\n",(int)(((char*)&(s->nice_match))-((char*)s))); +} + +*/ + + +/* + to compile for XCode 3.2 on MacOSX x86_64 + - run "gcc -g -c -DXCODE_MAC_X64_STRUCTURE amd64-match.S" + */ + + +#ifndef CURRENT_LINX_XCODE_MAC_X64_STRUCTURE +#define dsWSize ( 68)(%rdi) +#define dsWMask ( 76)(%rdi) +#define dsWindow ( 80)(%rdi) +#define dsPrev ( 96)(%rdi) +#define dsMatchLen (144)(%rdi) +#define dsPrevMatch (148)(%rdi) +#define dsStrStart (156)(%rdi) +#define dsMatchStart (160)(%rdi) +#define dsLookahead (164)(%rdi) +#define dsPrevLen (168)(%rdi) +#define dsMaxChainLen (172)(%rdi) +#define dsGoodMatch (188)(%rdi) +#define dsNiceMatch (192)(%rdi) + +#else + +#ifndef STRUCT_OFFSET +# define STRUCT_OFFSET (0) +#endif + + +#define dsWSize ( 56 + STRUCT_OFFSET)(%rdi) +#define dsWMask ( 64 + STRUCT_OFFSET)(%rdi) +#define dsWindow ( 72 + STRUCT_OFFSET)(%rdi) +#define dsPrev ( 88 + STRUCT_OFFSET)(%rdi) +#define dsMatchLen (136 + STRUCT_OFFSET)(%rdi) +#define dsPrevMatch (140 + STRUCT_OFFSET)(%rdi) +#define dsStrStart (148 + STRUCT_OFFSET)(%rdi) +#define dsMatchStart (152 + STRUCT_OFFSET)(%rdi) +#define dsLookahead (156 + STRUCT_OFFSET)(%rdi) +#define dsPrevLen (160 + STRUCT_OFFSET)(%rdi) +#define dsMaxChainLen (164 + STRUCT_OFFSET)(%rdi) +#define dsGoodMatch (180 + STRUCT_OFFSET)(%rdi) +#define dsNiceMatch (184 + STRUCT_OFFSET)(%rdi) + +#endif + + + + +.text + +/* uInt longest_match(deflate_state *deflatestate, IPos curmatch) */ + +longest_match: +/* + * Retrieve the function arguments. %curmatch will hold cur_match + * throughout the entire function (passed via rsi on amd64). + * rdi will hold the pointer to the deflate_state (first arg on amd64) + */ + mov %rsi, save_rsi + mov %rbx, save_rbx + mov %r12, save_r12 + mov %r13, save_r13 + mov %r14, save_r14 + mov %r15, save_r15 + +/* uInt wmask = s->w_mask; */ +/* unsigned chain_length = s->max_chain_length; */ +/* if (s->prev_length >= s->good_match) { */ +/* chain_length >>= 2; */ +/* } */ + + movl dsPrevLen, %eax + movl dsGoodMatch, %ebx + cmpl %ebx, %eax + movl dsWMask, %eax + movl dsMaxChainLen, %chainlenwmask + jl LastMatchGood + shrl $2, %chainlenwmask +LastMatchGood: + +/* chainlen is decremented once beforehand so that the function can */ +/* use the sign flag instead of the zero flag for the exit test. */ +/* It is then shifted into the high word, to make room for the wmask */ +/* value, which it will always accompany. */ + + decl %chainlenwmask + shll $16, %chainlenwmask + orl %eax, %chainlenwmask + +/* if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead; */ + + movl dsNiceMatch, %eax + movl dsLookahead, %ebx + cmpl %eax, %ebx + jl LookaheadLess + movl %eax, %ebx +LookaheadLess: movl %ebx, %nicematch + +/* register Bytef *scan = s->window + s->strstart; */ + + mov dsWindow, %window + movl dsStrStart, %limitd + lea (%limit, %window), %scan + +/* Determine how many bytes the scan ptr is off from being */ +/* dword-aligned. */ + + mov %scan, %scanalign + negl %scanalignd + andl $3, %scanalignd + +/* IPos limit = s->strstart > (IPos)MAX_DIST(s) ? */ +/* s->strstart - (IPos)MAX_DIST(s) : NIL; */ + + movl dsWSize, %eax + subl $MIN_LOOKAHEAD, %eax + xorl %ecx, %ecx + subl %eax, %limitd + cmovng %ecx, %limitd + +/* int best_len = s->prev_length; */ + + movl dsPrevLen, %bestlend + +/* Store the sum of s->window + best_len in %windowbestlen locally, and in memory. */ + + lea (%window, %bestlen), %windowbestlen + mov %windowbestlen, _windowbestlen + +/* register ush scan_start = *(ushf*)scan; */ +/* register ush scan_end = *(ushf*)(scan+best_len-1); */ +/* Posf *prev = s->prev; */ + + movzwl (%scan), %scanstart + movzwl -1(%scan, %bestlen), %scanend + mov dsPrev, %prev + +/* Jump into the main loop. */ + + movl %chainlenwmask, _chainlenwmask + jmp LoopEntry + +.balign 16 + +/* do { + * match = s->window + cur_match; + * if (*(ushf*)(match+best_len-1) != scan_end || + * *(ushf*)match != scan_start) continue; + * [...] + * } while ((cur_match = prev[cur_match & wmask]) > limit + * && --chain_length != 0); + * + * Here is the inner loop of the function. The function will spend the + * majority of its time in this loop, and majority of that time will + * be spent in the first ten instructions. + */ +LookupLoop: + andl %chainlenwmask, %curmatchd + movzwl (%prev, %curmatch, 2), %curmatchd + cmpl %limitd, %curmatchd + jbe LeaveNow + subl $0x00010000, %chainlenwmask + js LeaveNow +LoopEntry: cmpw -1(%windowbestlen, %curmatch), %scanendw + jne LookupLoop + cmpw %scanstartw, (%window, %curmatch) + jne LookupLoop + +/* Store the current value of chainlen. */ + movl %chainlenwmask, _chainlenwmask + +/* %scan is the string under scrutiny, and %prev to the string we */ +/* are hoping to match it up with. In actuality, %esi and %edi are */ +/* both pointed (MAX_MATCH_8 - scanalign) bytes ahead, and %edx is */ +/* initialized to -(MAX_MATCH_8 - scanalign). */ + + mov $(-MAX_MATCH_8), %rdx + lea (%curmatch, %window), %windowbestlen + lea MAX_MATCH_8(%windowbestlen, %scanalign), %windowbestlen + lea MAX_MATCH_8(%scan, %scanalign), %prev + +/* the prefetching below makes very little difference... */ + prefetcht1 (%windowbestlen, %rdx) + prefetcht1 (%prev, %rdx) + +/* + * Test the strings for equality, 8 bytes at a time. At the end, + * adjust %rdx so that it is offset to the exact byte that mismatched. + * + * It should be confessed that this loop usually does not represent + * much of the total running time. Replacing it with a more + * straightforward "rep cmpsb" would not drastically degrade + * performance -- unrolling it, for example, makes no difference. + */ + +#undef USE_SSE /* works, but is 6-7% slower, than non-SSE... */ + +LoopCmps: +#ifdef USE_SSE + /* Preload the SSE registers */ + movdqu (%windowbestlen, %rdx), %xmm1 + movdqu (%prev, %rdx), %xmm2 + pcmpeqb %xmm2, %xmm1 + movdqu 16(%windowbestlen, %rdx), %xmm3 + movdqu 16(%prev, %rdx), %xmm4 + pcmpeqb %xmm4, %xmm3 + movdqu 32(%windowbestlen, %rdx), %xmm5 + movdqu 32(%prev, %rdx), %xmm6 + pcmpeqb %xmm6, %xmm5 + movdqu 48(%windowbestlen, %rdx), %xmm7 + movdqu 48(%prev, %rdx), %xmm8 + pcmpeqb %xmm8, %xmm7 + + /* Check the comparisions' results */ + pmovmskb %xmm1, %rax + notw %ax + bsfw %ax, %ax + jnz LeaveLoopCmps + + /* this is the only iteration of the loop with a possibility of having + incremented rdx by 0x108 (each loop iteration add 16*4 = 0x40 + and (0x40*4)+8=0x108 */ + add $8, %rdx + jz LenMaximum + add $8, %rdx + + + pmovmskb %xmm3, %rax + notw %ax + bsfw %ax, %ax + jnz LeaveLoopCmps + + + add $16, %rdx + + + pmovmskb %xmm5, %rax + notw %ax + bsfw %ax, %ax + jnz LeaveLoopCmps + + add $16, %rdx + + + pmovmskb %xmm7, %rax + notw %ax + bsfw %ax, %ax + jnz LeaveLoopCmps + + add $16, %rdx + + jmp LoopCmps +LeaveLoopCmps: add %rax, %rdx +#else + mov (%windowbestlen, %rdx), %rax + xor (%prev, %rdx), %rax + jnz LeaveLoopCmps + + mov 8(%windowbestlen, %rdx), %rax + xor 8(%prev, %rdx), %rax + jnz LeaveLoopCmps8 + + mov 16(%windowbestlen, %rdx), %rax + xor 16(%prev, %rdx), %rax + jnz LeaveLoopCmps16 + + add $24, %rdx + jnz LoopCmps + jmp LenMaximum +# if 0 +/* + * This three-liner is tantalizingly simple, but bsf is a slow instruction, + * and the complicated alternative down below is quite a bit faster. Sad... + */ + +LeaveLoopCmps: bsf %rax, %rax /* find the first non-zero bit */ + shrl $3, %eax /* divide by 8 to get the byte */ + add %rax, %rdx +# else +LeaveLoopCmps16: + add $8, %rdx +LeaveLoopCmps8: + add $8, %rdx +LeaveLoopCmps: testl $0xFFFFFFFF, %eax /* Check the first 4 bytes */ + jnz Check16 + add $4, %rdx + shr $32, %rax +Check16: testw $0xFFFF, %ax + jnz LenLower + add $2, %rdx + shrl $16, %eax +LenLower: subb $1, %al + adc $0, %rdx +# endif +#endif + +/* Calculate the length of the match. If it is longer than MAX_MATCH, */ +/* then automatically accept it as the best possible match and leave. */ + + lea (%prev, %rdx), %rax + sub %scan, %rax + cmpl $MAX_MATCH, %eax + jge LenMaximum + +/* If the length of the match is not longer than the best match we */ +/* have so far, then forget it and return to the lookup loop. */ + + cmpl %bestlend, %eax + jg LongerMatch + mov _windowbestlen, %windowbestlen + mov dsPrev, %prev + movl _chainlenwmask, %edx + jmp LookupLoop + +/* s->match_start = cur_match; */ +/* best_len = len; */ +/* if (len >= nice_match) break; */ +/* scan_end = *(ushf*)(scan+best_len-1); */ + +LongerMatch: + movl %eax, %bestlend + movl %curmatchd, dsMatchStart + cmpl %nicematch, %eax + jge LeaveNow + + lea (%window, %bestlen), %windowbestlen + mov %windowbestlen, _windowbestlen + + movzwl -1(%scan, %rax), %scanend + mov dsPrev, %prev + movl _chainlenwmask, %chainlenwmask + jmp LookupLoop + +/* Accept the current string, with the maximum possible length. */ + +LenMaximum: + movl $MAX_MATCH, %bestlend + movl %curmatchd, dsMatchStart + +/* if ((uInt)best_len <= s->lookahead) return (uInt)best_len; */ +/* return s->lookahead; */ + +LeaveNow: + movl dsLookahead, %eax + cmpl %eax, %bestlend + cmovngl %bestlend, %eax +LookaheadRet: + +/* Restore the registers and return from whence we came. */ + + mov save_rsi, %rsi + mov save_rbx, %rbx + mov save_r12, %r12 + mov save_r13, %r13 + mov save_r14, %r14 + mov save_r15, %r15 + + ret + +match_init: ret diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/asm686/README.686 b/software/scsi2sd-util/zlib-1.2.8/contrib/asm686/README.686 new file mode 100644 index 0000000..a0bf3be --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/asm686/README.686 @@ -0,0 +1,51 @@ +This is a patched version of zlib, modified to use +Pentium-Pro-optimized assembly code in the deflation algorithm. The +files changed/added by this patch are: + +README.686 +match.S + +The speedup that this patch provides varies, depending on whether the +compiler used to build the original version of zlib falls afoul of the +PPro's speed traps. My own tests show a speedup of around 10-20% at +the default compression level, and 20-30% using -9, against a version +compiled using gcc 2.7.2.3. Your mileage may vary. + +Note that this code has been tailored for the PPro/PII in particular, +and will not perform particuarly well on a Pentium. + +If you are using an assembler other than GNU as, you will have to +translate match.S to use your assembler's syntax. (Have fun.) + +Brian Raiter +breadbox@muppetlabs.com +April, 1998 + + +Added for zlib 1.1.3: + +The patches come from +http://www.muppetlabs.com/~breadbox/software/assembly.html + +To compile zlib with this asm file, copy match.S to the zlib directory +then do: + +CFLAGS="-O3 -DASMV" ./configure +make OBJA=match.o + + +Update: + +I've been ignoring these assembly routines for years, believing that +gcc's generated code had caught up with it sometime around gcc 2.95 +and the major rearchitecting of the Pentium 4. However, I recently +learned that, despite what I believed, this code still has some life +in it. On the Pentium 4 and AMD64 chips, it continues to run about 8% +faster than the code produced by gcc 4.1. + +In acknowledgement of its continuing usefulness, I've altered the +license to match that of the rest of zlib. Share and Enjoy! + +Brian Raiter +breadbox@muppetlabs.com +April, 2007 diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/asm686/match.S b/software/scsi2sd-util/zlib-1.2.8/contrib/asm686/match.S new file mode 100644 index 0000000..fa42109 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/asm686/match.S @@ -0,0 +1,357 @@ +/* match.S -- x86 assembly version of the zlib longest_match() function. + * Optimized for the Intel 686 chips (PPro and later). + * + * Copyright (C) 1998, 2007 Brian Raiter + * + * This software is provided 'as-is', without any express or implied + * warranty. In no event will the author be held liable for any damages + * arising from the use of this software. + * + * Permission is granted to anyone to use this software for any purpose, + * including commercial applications, and to alter it and redistribute it + * freely, subject to the following restrictions: + * + * 1. The origin of this software must not be misrepresented; you must not + * claim that you wrote the original software. If you use this software + * in a product, an acknowledgment in the product documentation would be + * appreciated but is not required. + * 2. Altered source versions must be plainly marked as such, and must not be + * misrepresented as being the original software. + * 3. This notice may not be removed or altered from any source distribution. + */ + +#ifndef NO_UNDERLINE +#define match_init _match_init +#define longest_match _longest_match +#endif + +#define MAX_MATCH (258) +#define MIN_MATCH (3) +#define MIN_LOOKAHEAD (MAX_MATCH + MIN_MATCH + 1) +#define MAX_MATCH_8 ((MAX_MATCH + 7) & ~7) + +/* stack frame offsets */ + +#define chainlenwmask 0 /* high word: current chain len */ + /* low word: s->wmask */ +#define window 4 /* local copy of s->window */ +#define windowbestlen 8 /* s->window + bestlen */ +#define scanstart 16 /* first two bytes of string */ +#define scanend 12 /* last two bytes of string */ +#define scanalign 20 /* dword-misalignment of string */ +#define nicematch 24 /* a good enough match size */ +#define bestlen 28 /* size of best match so far */ +#define scan 32 /* ptr to string wanting match */ + +#define LocalVarsSize (36) +/* saved ebx 36 */ +/* saved edi 40 */ +/* saved esi 44 */ +/* saved ebp 48 */ +/* return address 52 */ +#define deflatestate 56 /* the function arguments */ +#define curmatch 60 + +/* All the +zlib1222add offsets are due to the addition of fields + * in zlib in the deflate_state structure since the asm code was first written + * (if you compile with zlib 1.0.4 or older, use "zlib1222add equ (-4)"). + * (if you compile with zlib between 1.0.5 and 1.2.2.1, use "zlib1222add equ 0"). + * if you compile with zlib 1.2.2.2 or later , use "zlib1222add equ 8"). + */ + +#define zlib1222add (8) + +#define dsWSize (36+zlib1222add) +#define dsWMask (44+zlib1222add) +#define dsWindow (48+zlib1222add) +#define dsPrev (56+zlib1222add) +#define dsMatchLen (88+zlib1222add) +#define dsPrevMatch (92+zlib1222add) +#define dsStrStart (100+zlib1222add) +#define dsMatchStart (104+zlib1222add) +#define dsLookahead (108+zlib1222add) +#define dsPrevLen (112+zlib1222add) +#define dsMaxChainLen (116+zlib1222add) +#define dsGoodMatch (132+zlib1222add) +#define dsNiceMatch (136+zlib1222add) + + +.file "match.S" + +.globl match_init, longest_match + +.text + +/* uInt longest_match(deflate_state *deflatestate, IPos curmatch) */ +.cfi_sections .debug_frame + +longest_match: + +.cfi_startproc +/* Save registers that the compiler may be using, and adjust %esp to */ +/* make room for our stack frame. */ + + pushl %ebp + .cfi_def_cfa_offset 8 + .cfi_offset ebp, -8 + pushl %edi + .cfi_def_cfa_offset 12 + pushl %esi + .cfi_def_cfa_offset 16 + pushl %ebx + .cfi_def_cfa_offset 20 + subl $LocalVarsSize, %esp + .cfi_def_cfa_offset LocalVarsSize+20 + +/* Retrieve the function arguments. %ecx will hold cur_match */ +/* throughout the entire function. %edx will hold the pointer to the */ +/* deflate_state structure during the function's setup (before */ +/* entering the main loop). */ + + movl deflatestate(%esp), %edx + movl curmatch(%esp), %ecx + +/* uInt wmask = s->w_mask; */ +/* unsigned chain_length = s->max_chain_length; */ +/* if (s->prev_length >= s->good_match) { */ +/* chain_length >>= 2; */ +/* } */ + + movl dsPrevLen(%edx), %eax + movl dsGoodMatch(%edx), %ebx + cmpl %ebx, %eax + movl dsWMask(%edx), %eax + movl dsMaxChainLen(%edx), %ebx + jl LastMatchGood + shrl $2, %ebx +LastMatchGood: + +/* chainlen is decremented once beforehand so that the function can */ +/* use the sign flag instead of the zero flag for the exit test. */ +/* It is then shifted into the high word, to make room for the wmask */ +/* value, which it will always accompany. */ + + decl %ebx + shll $16, %ebx + orl %eax, %ebx + movl %ebx, chainlenwmask(%esp) + +/* if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead; */ + + movl dsNiceMatch(%edx), %eax + movl dsLookahead(%edx), %ebx + cmpl %eax, %ebx + jl LookaheadLess + movl %eax, %ebx +LookaheadLess: movl %ebx, nicematch(%esp) + +/* register Bytef *scan = s->window + s->strstart; */ + + movl dsWindow(%edx), %esi + movl %esi, window(%esp) + movl dsStrStart(%edx), %ebp + lea (%esi,%ebp), %edi + movl %edi, scan(%esp) + +/* Determine how many bytes the scan ptr is off from being */ +/* dword-aligned. */ + + movl %edi, %eax + negl %eax + andl $3, %eax + movl %eax, scanalign(%esp) + +/* IPos limit = s->strstart > (IPos)MAX_DIST(s) ? */ +/* s->strstart - (IPos)MAX_DIST(s) : NIL; */ + + movl dsWSize(%edx), %eax + subl $MIN_LOOKAHEAD, %eax + subl %eax, %ebp + jg LimitPositive + xorl %ebp, %ebp +LimitPositive: + +/* int best_len = s->prev_length; */ + + movl dsPrevLen(%edx), %eax + movl %eax, bestlen(%esp) + +/* Store the sum of s->window + best_len in %esi locally, and in %esi. */ + + addl %eax, %esi + movl %esi, windowbestlen(%esp) + +/* register ush scan_start = *(ushf*)scan; */ +/* register ush scan_end = *(ushf*)(scan+best_len-1); */ +/* Posf *prev = s->prev; */ + + movzwl (%edi), %ebx + movl %ebx, scanstart(%esp) + movzwl -1(%edi,%eax), %ebx + movl %ebx, scanend(%esp) + movl dsPrev(%edx), %edi + +/* Jump into the main loop. */ + + movl chainlenwmask(%esp), %edx + jmp LoopEntry + +.balign 16 + +/* do { + * match = s->window + cur_match; + * if (*(ushf*)(match+best_len-1) != scan_end || + * *(ushf*)match != scan_start) continue; + * [...] + * } while ((cur_match = prev[cur_match & wmask]) > limit + * && --chain_length != 0); + * + * Here is the inner loop of the function. The function will spend the + * majority of its time in this loop, and majority of that time will + * be spent in the first ten instructions. + * + * Within this loop: + * %ebx = scanend + * %ecx = curmatch + * %edx = chainlenwmask - i.e., ((chainlen << 16) | wmask) + * %esi = windowbestlen - i.e., (window + bestlen) + * %edi = prev + * %ebp = limit + */ +LookupLoop: + andl %edx, %ecx + movzwl (%edi,%ecx,2), %ecx + cmpl %ebp, %ecx + jbe LeaveNow + subl $0x00010000, %edx + js LeaveNow +LoopEntry: movzwl -1(%esi,%ecx), %eax + cmpl %ebx, %eax + jnz LookupLoop + movl window(%esp), %eax + movzwl (%eax,%ecx), %eax + cmpl scanstart(%esp), %eax + jnz LookupLoop + +/* Store the current value of chainlen. */ + + movl %edx, chainlenwmask(%esp) + +/* Point %edi to the string under scrutiny, and %esi to the string we */ +/* are hoping to match it up with. In actuality, %esi and %edi are */ +/* both pointed (MAX_MATCH_8 - scanalign) bytes ahead, and %edx is */ +/* initialized to -(MAX_MATCH_8 - scanalign). */ + + movl window(%esp), %esi + movl scan(%esp), %edi + addl %ecx, %esi + movl scanalign(%esp), %eax + movl $(-MAX_MATCH_8), %edx + lea MAX_MATCH_8(%edi,%eax), %edi + lea MAX_MATCH_8(%esi,%eax), %esi + +/* Test the strings for equality, 8 bytes at a time. At the end, + * adjust %edx so that it is offset to the exact byte that mismatched. + * + * We already know at this point that the first three bytes of the + * strings match each other, and they can be safely passed over before + * starting the compare loop. So what this code does is skip over 0-3 + * bytes, as much as necessary in order to dword-align the %edi + * pointer. (%esi will still be misaligned three times out of four.) + * + * It should be confessed that this loop usually does not represent + * much of the total running time. Replacing it with a more + * straightforward "rep cmpsb" would not drastically degrade + * performance. + */ +LoopCmps: + movl (%esi,%edx), %eax + xorl (%edi,%edx), %eax + jnz LeaveLoopCmps + movl 4(%esi,%edx), %eax + xorl 4(%edi,%edx), %eax + jnz LeaveLoopCmps4 + addl $8, %edx + jnz LoopCmps + jmp LenMaximum +LeaveLoopCmps4: addl $4, %edx +LeaveLoopCmps: testl $0x0000FFFF, %eax + jnz LenLower + addl $2, %edx + shrl $16, %eax +LenLower: subb $1, %al + adcl $0, %edx + +/* Calculate the length of the match. If it is longer than MAX_MATCH, */ +/* then automatically accept it as the best possible match and leave. */ + + lea (%edi,%edx), %eax + movl scan(%esp), %edi + subl %edi, %eax + cmpl $MAX_MATCH, %eax + jge LenMaximum + +/* If the length of the match is not longer than the best match we */ +/* have so far, then forget it and return to the lookup loop. */ + + movl deflatestate(%esp), %edx + movl bestlen(%esp), %ebx + cmpl %ebx, %eax + jg LongerMatch + movl windowbestlen(%esp), %esi + movl dsPrev(%edx), %edi + movl scanend(%esp), %ebx + movl chainlenwmask(%esp), %edx + jmp LookupLoop + +/* s->match_start = cur_match; */ +/* best_len = len; */ +/* if (len >= nice_match) break; */ +/* scan_end = *(ushf*)(scan+best_len-1); */ + +LongerMatch: movl nicematch(%esp), %ebx + movl %eax, bestlen(%esp) + movl %ecx, dsMatchStart(%edx) + cmpl %ebx, %eax + jge LeaveNow + movl window(%esp), %esi + addl %eax, %esi + movl %esi, windowbestlen(%esp) + movzwl -1(%edi,%eax), %ebx + movl dsPrev(%edx), %edi + movl %ebx, scanend(%esp) + movl chainlenwmask(%esp), %edx + jmp LookupLoop + +/* Accept the current string, with the maximum possible length. */ + +LenMaximum: movl deflatestate(%esp), %edx + movl $MAX_MATCH, bestlen(%esp) + movl %ecx, dsMatchStart(%edx) + +/* if ((uInt)best_len <= s->lookahead) return (uInt)best_len; */ +/* return s->lookahead; */ + +LeaveNow: + movl deflatestate(%esp), %edx + movl bestlen(%esp), %ebx + movl dsLookahead(%edx), %eax + cmpl %eax, %ebx + jg LookaheadRet + movl %ebx, %eax +LookaheadRet: + +/* Restore the stack and return from whence we came. */ + + addl $LocalVarsSize, %esp + .cfi_def_cfa_offset 20 + popl %ebx + .cfi_def_cfa_offset 16 + popl %esi + .cfi_def_cfa_offset 12 + popl %edi + .cfi_def_cfa_offset 8 + popl %ebp + .cfi_def_cfa_offset 4 +.cfi_endproc +match_init: ret diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/blast/Makefile b/software/scsi2sd-util/zlib-1.2.8/contrib/blast/Makefile new file mode 100644 index 0000000..9be80ba --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/blast/Makefile @@ -0,0 +1,8 @@ +blast: blast.c blast.h + cc -DTEST -o blast blast.c + +test: blast + blast < test.pk | cmp - test.txt + +clean: + rm -f blast blast.o diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/blast/README b/software/scsi2sd-util/zlib-1.2.8/contrib/blast/README new file mode 100644 index 0000000..e3a60b3 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/blast/README @@ -0,0 +1,4 @@ +Read blast.h for purpose and usage. + +Mark Adler +madler@alumni.caltech.edu diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/blast/blast.c b/software/scsi2sd-util/zlib-1.2.8/contrib/blast/blast.c new file mode 100644 index 0000000..69ef0fe --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/blast/blast.c @@ -0,0 +1,446 @@ +/* blast.c + * Copyright (C) 2003, 2012 Mark Adler + * For conditions of distribution and use, see copyright notice in blast.h + * version 1.2, 24 Oct 2012 + * + * blast.c decompresses data compressed by the PKWare Compression Library. + * This function provides functionality similar to the explode() function of + * the PKWare library, hence the name "blast". + * + * This decompressor is based on the excellent format description provided by + * Ben Rudiak-Gould in comp.compression on August 13, 2001. Interestingly, the + * example Ben provided in the post is incorrect. The distance 110001 should + * instead be 111000. When corrected, the example byte stream becomes: + * + * 00 04 82 24 25 8f 80 7f + * + * which decompresses to "AIAIAIAIAIAIA" (without the quotes). + */ + +/* + * Change history: + * + * 1.0 12 Feb 2003 - First version + * 1.1 16 Feb 2003 - Fixed distance check for > 4 GB uncompressed data + * 1.2 24 Oct 2012 - Add note about using binary mode in stdio + * - Fix comparisons of differently signed integers + */ + +#include /* for setjmp(), longjmp(), and jmp_buf */ +#include "blast.h" /* prototype for blast() */ + +#define local static /* for local function definitions */ +#define MAXBITS 13 /* maximum code length */ +#define MAXWIN 4096 /* maximum window size */ + +/* input and output state */ +struct state { + /* input state */ + blast_in infun; /* input function provided by user */ + void *inhow; /* opaque information passed to infun() */ + unsigned char *in; /* next input location */ + unsigned left; /* available input at in */ + int bitbuf; /* bit buffer */ + int bitcnt; /* number of bits in bit buffer */ + + /* input limit error return state for bits() and decode() */ + jmp_buf env; + + /* output state */ + blast_out outfun; /* output function provided by user */ + void *outhow; /* opaque information passed to outfun() */ + unsigned next; /* index of next write location in out[] */ + int first; /* true to check distances (for first 4K) */ + unsigned char out[MAXWIN]; /* output buffer and sliding window */ +}; + +/* + * Return need bits from the input stream. This always leaves less than + * eight bits in the buffer. bits() works properly for need == 0. + * + * Format notes: + * + * - Bits are stored in bytes from the least significant bit to the most + * significant bit. Therefore bits are dropped from the bottom of the bit + * buffer, using shift right, and new bytes are appended to the top of the + * bit buffer, using shift left. + */ +local int bits(struct state *s, int need) +{ + int val; /* bit accumulator */ + + /* load at least need bits into val */ + val = s->bitbuf; + while (s->bitcnt < need) { + if (s->left == 0) { + s->left = s->infun(s->inhow, &(s->in)); + if (s->left == 0) longjmp(s->env, 1); /* out of input */ + } + val |= (int)(*(s->in)++) << s->bitcnt; /* load eight bits */ + s->left--; + s->bitcnt += 8; + } + + /* drop need bits and update buffer, always zero to seven bits left */ + s->bitbuf = val >> need; + s->bitcnt -= need; + + /* return need bits, zeroing the bits above that */ + return val & ((1 << need) - 1); +} + +/* + * Huffman code decoding tables. count[1..MAXBITS] is the number of symbols of + * each length, which for a canonical code are stepped through in order. + * symbol[] are the symbol values in canonical order, where the number of + * entries is the sum of the counts in count[]. The decoding process can be + * seen in the function decode() below. + */ +struct huffman { + short *count; /* number of symbols of each length */ + short *symbol; /* canonically ordered symbols */ +}; + +/* + * Decode a code from the stream s using huffman table h. Return the symbol or + * a negative value if there is an error. If all of the lengths are zero, i.e. + * an empty code, or if the code is incomplete and an invalid code is received, + * then -9 is returned after reading MAXBITS bits. + * + * Format notes: + * + * - The codes as stored in the compressed data are bit-reversed relative to + * a simple integer ordering of codes of the same lengths. Hence below the + * bits are pulled from the compressed data one at a time and used to + * build the code value reversed from what is in the stream in order to + * permit simple integer comparisons for decoding. + * + * - The first code for the shortest length is all ones. Subsequent codes of + * the same length are simply integer decrements of the previous code. When + * moving up a length, a one bit is appended to the code. For a complete + * code, the last code of the longest length will be all zeros. To support + * this ordering, the bits pulled during decoding are inverted to apply the + * more "natural" ordering starting with all zeros and incrementing. + */ +local int decode(struct state *s, struct huffman *h) +{ + int len; /* current number of bits in code */ + int code; /* len bits being decoded */ + int first; /* first code of length len */ + int count; /* number of codes of length len */ + int index; /* index of first code of length len in symbol table */ + int bitbuf; /* bits from stream */ + int left; /* bits left in next or left to process */ + short *next; /* next number of codes */ + + bitbuf = s->bitbuf; + left = s->bitcnt; + code = first = index = 0; + len = 1; + next = h->count + 1; + while (1) { + while (left--) { + code |= (bitbuf & 1) ^ 1; /* invert code */ + bitbuf >>= 1; + count = *next++; + if (code < first + count) { /* if length len, return symbol */ + s->bitbuf = bitbuf; + s->bitcnt = (s->bitcnt - len) & 7; + return h->symbol[index + (code - first)]; + } + index += count; /* else update for next length */ + first += count; + first <<= 1; + code <<= 1; + len++; + } + left = (MAXBITS+1) - len; + if (left == 0) break; + if (s->left == 0) { + s->left = s->infun(s->inhow, &(s->in)); + if (s->left == 0) longjmp(s->env, 1); /* out of input */ + } + bitbuf = *(s->in)++; + s->left--; + if (left > 8) left = 8; + } + return -9; /* ran out of codes */ +} + +/* + * Given a list of repeated code lengths rep[0..n-1], where each byte is a + * count (high four bits + 1) and a code length (low four bits), generate the + * list of code lengths. This compaction reduces the size of the object code. + * Then given the list of code lengths length[0..n-1] representing a canonical + * Huffman code for n symbols, construct the tables required to decode those + * codes. Those tables are the number of codes of each length, and the symbols + * sorted by length, retaining their original order within each length. The + * return value is zero for a complete code set, negative for an over- + * subscribed code set, and positive for an incomplete code set. The tables + * can be used if the return value is zero or positive, but they cannot be used + * if the return value is negative. If the return value is zero, it is not + * possible for decode() using that table to return an error--any stream of + * enough bits will resolve to a symbol. If the return value is positive, then + * it is possible for decode() using that table to return an error for received + * codes past the end of the incomplete lengths. + */ +local int construct(struct huffman *h, const unsigned char *rep, int n) +{ + int symbol; /* current symbol when stepping through length[] */ + int len; /* current length when stepping through h->count[] */ + int left; /* number of possible codes left of current length */ + short offs[MAXBITS+1]; /* offsets in symbol table for each length */ + short length[256]; /* code lengths */ + + /* convert compact repeat counts into symbol bit length list */ + symbol = 0; + do { + len = *rep++; + left = (len >> 4) + 1; + len &= 15; + do { + length[symbol++] = len; + } while (--left); + } while (--n); + n = symbol; + + /* count number of codes of each length */ + for (len = 0; len <= MAXBITS; len++) + h->count[len] = 0; + for (symbol = 0; symbol < n; symbol++) + (h->count[length[symbol]])++; /* assumes lengths are within bounds */ + if (h->count[0] == n) /* no codes! */ + return 0; /* complete, but decode() will fail */ + + /* check for an over-subscribed or incomplete set of lengths */ + left = 1; /* one possible code of zero length */ + for (len = 1; len <= MAXBITS; len++) { + left <<= 1; /* one more bit, double codes left */ + left -= h->count[len]; /* deduct count from possible codes */ + if (left < 0) return left; /* over-subscribed--return negative */ + } /* left > 0 means incomplete */ + + /* generate offsets into symbol table for each length for sorting */ + offs[1] = 0; + for (len = 1; len < MAXBITS; len++) + offs[len + 1] = offs[len] + h->count[len]; + + /* + * put symbols in table sorted by length, by symbol order within each + * length + */ + for (symbol = 0; symbol < n; symbol++) + if (length[symbol] != 0) + h->symbol[offs[length[symbol]]++] = symbol; + + /* return zero for complete set, positive for incomplete set */ + return left; +} + +/* + * Decode PKWare Compression Library stream. + * + * Format notes: + * + * - First byte is 0 if literals are uncoded or 1 if they are coded. Second + * byte is 4, 5, or 6 for the number of extra bits in the distance code. + * This is the base-2 logarithm of the dictionary size minus six. + * + * - Compressed data is a combination of literals and length/distance pairs + * terminated by an end code. Literals are either Huffman coded or + * uncoded bytes. A length/distance pair is a coded length followed by a + * coded distance to represent a string that occurs earlier in the + * uncompressed data that occurs again at the current location. + * + * - A bit preceding a literal or length/distance pair indicates which comes + * next, 0 for literals, 1 for length/distance. + * + * - If literals are uncoded, then the next eight bits are the literal, in the + * normal bit order in th stream, i.e. no bit-reversal is needed. Similarly, + * no bit reversal is needed for either the length extra bits or the distance + * extra bits. + * + * - Literal bytes are simply written to the output. A length/distance pair is + * an instruction to copy previously uncompressed bytes to the output. The + * copy is from distance bytes back in the output stream, copying for length + * bytes. + * + * - Distances pointing before the beginning of the output data are not + * permitted. + * + * - Overlapped copies, where the length is greater than the distance, are + * allowed and common. For example, a distance of one and a length of 518 + * simply copies the last byte 518 times. A distance of four and a length of + * twelve copies the last four bytes three times. A simple forward copy + * ignoring whether the length is greater than the distance or not implements + * this correctly. + */ +local int decomp(struct state *s) +{ + int lit; /* true if literals are coded */ + int dict; /* log2(dictionary size) - 6 */ + int symbol; /* decoded symbol, extra bits for distance */ + int len; /* length for copy */ + unsigned dist; /* distance for copy */ + int copy; /* copy counter */ + unsigned char *from, *to; /* copy pointers */ + static int virgin = 1; /* build tables once */ + static short litcnt[MAXBITS+1], litsym[256]; /* litcode memory */ + static short lencnt[MAXBITS+1], lensym[16]; /* lencode memory */ + static short distcnt[MAXBITS+1], distsym[64]; /* distcode memory */ + static struct huffman litcode = {litcnt, litsym}; /* length code */ + static struct huffman lencode = {lencnt, lensym}; /* length code */ + static struct huffman distcode = {distcnt, distsym};/* distance code */ + /* bit lengths of literal codes */ + static const unsigned char litlen[] = { + 11, 124, 8, 7, 28, 7, 188, 13, 76, 4, 10, 8, 12, 10, 12, 10, 8, 23, 8, + 9, 7, 6, 7, 8, 7, 6, 55, 8, 23, 24, 12, 11, 7, 9, 11, 12, 6, 7, 22, 5, + 7, 24, 6, 11, 9, 6, 7, 22, 7, 11, 38, 7, 9, 8, 25, 11, 8, 11, 9, 12, + 8, 12, 5, 38, 5, 38, 5, 11, 7, 5, 6, 21, 6, 10, 53, 8, 7, 24, 10, 27, + 44, 253, 253, 253, 252, 252, 252, 13, 12, 45, 12, 45, 12, 61, 12, 45, + 44, 173}; + /* bit lengths of length codes 0..15 */ + static const unsigned char lenlen[] = {2, 35, 36, 53, 38, 23}; + /* bit lengths of distance codes 0..63 */ + static const unsigned char distlen[] = {2, 20, 53, 230, 247, 151, 248}; + static const short base[16] = { /* base for length codes */ + 3, 2, 4, 5, 6, 7, 8, 9, 10, 12, 16, 24, 40, 72, 136, 264}; + static const char extra[16] = { /* extra bits for length codes */ + 0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 5, 6, 7, 8}; + + /* set up decoding tables (once--might not be thread-safe) */ + if (virgin) { + construct(&litcode, litlen, sizeof(litlen)); + construct(&lencode, lenlen, sizeof(lenlen)); + construct(&distcode, distlen, sizeof(distlen)); + virgin = 0; + } + + /* read header */ + lit = bits(s, 8); + if (lit > 1) return -1; + dict = bits(s, 8); + if (dict < 4 || dict > 6) return -2; + + /* decode literals and length/distance pairs */ + do { + if (bits(s, 1)) { + /* get length */ + symbol = decode(s, &lencode); + len = base[symbol] + bits(s, extra[symbol]); + if (len == 519) break; /* end code */ + + /* get distance */ + symbol = len == 2 ? 2 : dict; + dist = decode(s, &distcode) << symbol; + dist += bits(s, symbol); + dist++; + if (s->first && dist > s->next) + return -3; /* distance too far back */ + + /* copy length bytes from distance bytes back */ + do { + to = s->out + s->next; + from = to - dist; + copy = MAXWIN; + if (s->next < dist) { + from += copy; + copy = dist; + } + copy -= s->next; + if (copy > len) copy = len; + len -= copy; + s->next += copy; + do { + *to++ = *from++; + } while (--copy); + if (s->next == MAXWIN) { + if (s->outfun(s->outhow, s->out, s->next)) return 1; + s->next = 0; + s->first = 0; + } + } while (len != 0); + } + else { + /* get literal and write it */ + symbol = lit ? decode(s, &litcode) : bits(s, 8); + s->out[s->next++] = symbol; + if (s->next == MAXWIN) { + if (s->outfun(s->outhow, s->out, s->next)) return 1; + s->next = 0; + s->first = 0; + } + } + } while (1); + return 0; +} + +/* See comments in blast.h */ +int blast(blast_in infun, void *inhow, blast_out outfun, void *outhow) +{ + struct state s; /* input/output state */ + int err; /* return value */ + + /* initialize input state */ + s.infun = infun; + s.inhow = inhow; + s.left = 0; + s.bitbuf = 0; + s.bitcnt = 0; + + /* initialize output state */ + s.outfun = outfun; + s.outhow = outhow; + s.next = 0; + s.first = 1; + + /* return if bits() or decode() tries to read past available input */ + if (setjmp(s.env) != 0) /* if came back here via longjmp(), */ + err = 2; /* then skip decomp(), return error */ + else + err = decomp(&s); /* decompress */ + + /* write any leftover output and update the error code if needed */ + if (err != 1 && s.next && s.outfun(s.outhow, s.out, s.next) && err == 0) + err = 1; + return err; +} + +#ifdef TEST +/* Example of how to use blast() */ +#include +#include + +#define CHUNK 16384 + +local unsigned inf(void *how, unsigned char **buf) +{ + static unsigned char hold[CHUNK]; + + *buf = hold; + return fread(hold, 1, CHUNK, (FILE *)how); +} + +local int outf(void *how, unsigned char *buf, unsigned len) +{ + return fwrite(buf, 1, len, (FILE *)how) != len; +} + +/* Decompress a PKWare Compression Library stream from stdin to stdout */ +int main(void) +{ + int ret, n; + + /* decompress to stdout */ + ret = blast(inf, stdin, outf, stdout); + if (ret != 0) fprintf(stderr, "blast error: %d\n", ret); + + /* see if there are any leftover bytes */ + n = 0; + while (getchar() != EOF) n++; + if (n) fprintf(stderr, "blast warning: %d unused bytes of input\n", n); + + /* return blast() error code */ + return ret; +} +#endif diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/blast/blast.h b/software/scsi2sd-util/zlib-1.2.8/contrib/blast/blast.h new file mode 100644 index 0000000..658cfd3 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/blast/blast.h @@ -0,0 +1,75 @@ +/* blast.h -- interface for blast.c + Copyright (C) 2003, 2012 Mark Adler + version 1.2, 24 Oct 2012 + + This software is provided 'as-is', without any express or implied + warranty. In no event will the author be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. + + Mark Adler madler@alumni.caltech.edu + */ + + +/* + * blast() decompresses the PKWare Data Compression Library (DCL) compressed + * format. It provides the same functionality as the explode() function in + * that library. (Note: PKWare overused the "implode" verb, and the format + * used by their library implode() function is completely different and + * incompatible with the implode compression method supported by PKZIP.) + * + * The binary mode for stdio functions should be used to assure that the + * compressed data is not corrupted when read or written. For example: + * fopen(..., "rb") and fopen(..., "wb"). + */ + + +typedef unsigned (*blast_in)(void *how, unsigned char **buf); +typedef int (*blast_out)(void *how, unsigned char *buf, unsigned len); +/* Definitions for input/output functions passed to blast(). See below for + * what the provided functions need to do. + */ + + +int blast(blast_in infun, void *inhow, blast_out outfun, void *outhow); +/* Decompress input to output using the provided infun() and outfun() calls. + * On success, the return value of blast() is zero. If there is an error in + * the source data, i.e. it is not in the proper format, then a negative value + * is returned. If there is not enough input available or there is not enough + * output space, then a positive error is returned. + * + * The input function is invoked: len = infun(how, &buf), where buf is set by + * infun() to point to the input buffer, and infun() returns the number of + * available bytes there. If infun() returns zero, then blast() returns with + * an input error. (blast() only asks for input if it needs it.) inhow is for + * use by the application to pass an input descriptor to infun(), if desired. + * + * The output function is invoked: err = outfun(how, buf, len), where the bytes + * to be written are buf[0..len-1]. If err is not zero, then blast() returns + * with an output error. outfun() is always called with len <= 4096. outhow + * is for use by the application to pass an output descriptor to outfun(), if + * desired. + * + * The return codes are: + * + * 2: ran out of input before completing decompression + * 1: output error before completing decompression + * 0: successful decompression + * -1: literal flag not zero or one + * -2: dictionary size not in 4..6 + * -3: distance is too far back + * + * At the bottom of blast.c is an example program that uses blast() that can be + * compiled to produce a command-line decompression filter by defining TEST. + */ diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/blast/test.pk b/software/scsi2sd-util/zlib-1.2.8/contrib/blast/test.pk new file mode 100644 index 0000000..be10b2b Binary files /dev/null and b/software/scsi2sd-util/zlib-1.2.8/contrib/blast/test.pk differ diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/blast/test.txt b/software/scsi2sd-util/zlib-1.2.8/contrib/blast/test.txt new file mode 100644 index 0000000..bfdf1c5 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/blast/test.txt @@ -0,0 +1 @@ +AIAIAIAIAIAIA \ No newline at end of file diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/delphi/ZLib.pas b/software/scsi2sd-util/zlib-1.2.8/contrib/delphi/ZLib.pas new file mode 100644 index 0000000..a579974 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/delphi/ZLib.pas @@ -0,0 +1,557 @@ +{*******************************************************} +{ } +{ Borland Delphi Supplemental Components } +{ ZLIB Data Compression Interface Unit } +{ } +{ Copyright (c) 1997,99 Borland Corporation } +{ } +{*******************************************************} + +{ Updated for zlib 1.2.x by Cosmin Truta } + +unit ZLib; + +interface + +uses SysUtils, Classes; + +type + TAlloc = function (AppData: Pointer; Items, Size: Integer): Pointer; cdecl; + TFree = procedure (AppData, Block: Pointer); cdecl; + + // Internal structure. Ignore. + TZStreamRec = packed record + next_in: PChar; // next input byte + avail_in: Integer; // number of bytes available at next_in + total_in: Longint; // total nb of input bytes read so far + + next_out: PChar; // next output byte should be put here + avail_out: Integer; // remaining free space at next_out + total_out: Longint; // total nb of bytes output so far + + msg: PChar; // last error message, NULL if no error + internal: Pointer; // not visible by applications + + zalloc: TAlloc; // used to allocate the internal state + zfree: TFree; // used to free the internal state + AppData: Pointer; // private data object passed to zalloc and zfree + + data_type: Integer; // best guess about the data type: ascii or binary + adler: Longint; // adler32 value of the uncompressed data + reserved: Longint; // reserved for future use + end; + + // Abstract ancestor class + TCustomZlibStream = class(TStream) + private + FStrm: TStream; + FStrmPos: Integer; + FOnProgress: TNotifyEvent; + FZRec: TZStreamRec; + FBuffer: array [Word] of Char; + protected + procedure Progress(Sender: TObject); dynamic; + property OnProgress: TNotifyEvent read FOnProgress write FOnProgress; + constructor Create(Strm: TStream); + end; + +{ TCompressionStream compresses data on the fly as data is written to it, and + stores the compressed data to another stream. + + TCompressionStream is write-only and strictly sequential. Reading from the + stream will raise an exception. Using Seek to move the stream pointer + will raise an exception. + + Output data is cached internally, written to the output stream only when + the internal output buffer is full. All pending output data is flushed + when the stream is destroyed. + + The Position property returns the number of uncompressed bytes of + data that have been written to the stream so far. + + CompressionRate returns the on-the-fly percentage by which the original + data has been compressed: (1 - (CompressedBytes / UncompressedBytes)) * 100 + If raw data size = 100 and compressed data size = 25, the CompressionRate + is 75% + + The OnProgress event is called each time the output buffer is filled and + written to the output stream. This is useful for updating a progress + indicator when you are writing a large chunk of data to the compression + stream in a single call.} + + + TCompressionLevel = (clNone, clFastest, clDefault, clMax); + + TCompressionStream = class(TCustomZlibStream) + private + function GetCompressionRate: Single; + public + constructor Create(CompressionLevel: TCompressionLevel; Dest: TStream); + destructor Destroy; override; + function Read(var Buffer; Count: Longint): Longint; override; + function Write(const Buffer; Count: Longint): Longint; override; + function Seek(Offset: Longint; Origin: Word): Longint; override; + property CompressionRate: Single read GetCompressionRate; + property OnProgress; + end; + +{ TDecompressionStream decompresses data on the fly as data is read from it. + + Compressed data comes from a separate source stream. TDecompressionStream + is read-only and unidirectional; you can seek forward in the stream, but not + backwards. The special case of setting the stream position to zero is + allowed. Seeking forward decompresses data until the requested position in + the uncompressed data has been reached. Seeking backwards, seeking relative + to the end of the stream, requesting the size of the stream, and writing to + the stream will raise an exception. + + The Position property returns the number of bytes of uncompressed data that + have been read from the stream so far. + + The OnProgress event is called each time the internal input buffer of + compressed data is exhausted and the next block is read from the input stream. + This is useful for updating a progress indicator when you are reading a + large chunk of data from the decompression stream in a single call.} + + TDecompressionStream = class(TCustomZlibStream) + public + constructor Create(Source: TStream); + destructor Destroy; override; + function Read(var Buffer; Count: Longint): Longint; override; + function Write(const Buffer; Count: Longint): Longint; override; + function Seek(Offset: Longint; Origin: Word): Longint; override; + property OnProgress; + end; + + + +{ CompressBuf compresses data, buffer to buffer, in one call. + In: InBuf = ptr to compressed data + InBytes = number of bytes in InBuf + Out: OutBuf = ptr to newly allocated buffer containing decompressed data + OutBytes = number of bytes in OutBuf } +procedure CompressBuf(const InBuf: Pointer; InBytes: Integer; + out OutBuf: Pointer; out OutBytes: Integer); + + +{ DecompressBuf decompresses data, buffer to buffer, in one call. + In: InBuf = ptr to compressed data + InBytes = number of bytes in InBuf + OutEstimate = zero, or est. size of the decompressed data + Out: OutBuf = ptr to newly allocated buffer containing decompressed data + OutBytes = number of bytes in OutBuf } +procedure DecompressBuf(const InBuf: Pointer; InBytes: Integer; + OutEstimate: Integer; out OutBuf: Pointer; out OutBytes: Integer); + +{ DecompressToUserBuf decompresses data, buffer to buffer, in one call. + In: InBuf = ptr to compressed data + InBytes = number of bytes in InBuf + Out: OutBuf = ptr to user-allocated buffer to contain decompressed data + BufSize = number of bytes in OutBuf } +procedure DecompressToUserBuf(const InBuf: Pointer; InBytes: Integer; + const OutBuf: Pointer; BufSize: Integer); + +const + zlib_version = '1.2.8'; + +type + EZlibError = class(Exception); + ECompressionError = class(EZlibError); + EDecompressionError = class(EZlibError); + +implementation + +uses ZLibConst; + +const + Z_NO_FLUSH = 0; + Z_PARTIAL_FLUSH = 1; + Z_SYNC_FLUSH = 2; + Z_FULL_FLUSH = 3; + Z_FINISH = 4; + + Z_OK = 0; + Z_STREAM_END = 1; + Z_NEED_DICT = 2; + Z_ERRNO = (-1); + Z_STREAM_ERROR = (-2); + Z_DATA_ERROR = (-3); + Z_MEM_ERROR = (-4); + Z_BUF_ERROR = (-5); + Z_VERSION_ERROR = (-6); + + Z_NO_COMPRESSION = 0; + Z_BEST_SPEED = 1; + Z_BEST_COMPRESSION = 9; + Z_DEFAULT_COMPRESSION = (-1); + + Z_FILTERED = 1; + Z_HUFFMAN_ONLY = 2; + Z_RLE = 3; + Z_DEFAULT_STRATEGY = 0; + + Z_BINARY = 0; + Z_ASCII = 1; + Z_UNKNOWN = 2; + + Z_DEFLATED = 8; + + +{$L adler32.obj} +{$L compress.obj} +{$L crc32.obj} +{$L deflate.obj} +{$L infback.obj} +{$L inffast.obj} +{$L inflate.obj} +{$L inftrees.obj} +{$L trees.obj} +{$L uncompr.obj} +{$L zutil.obj} + +procedure adler32; external; +procedure compressBound; external; +procedure crc32; external; +procedure deflateInit2_; external; +procedure deflateParams; external; + +function _malloc(Size: Integer): Pointer; cdecl; +begin + Result := AllocMem(Size); +end; + +procedure _free(Block: Pointer); cdecl; +begin + FreeMem(Block); +end; + +procedure _memset(P: Pointer; B: Byte; count: Integer); cdecl; +begin + FillChar(P^, count, B); +end; + +procedure _memcpy(dest, source: Pointer; count: Integer); cdecl; +begin + Move(source^, dest^, count); +end; + + + +// deflate compresses data +function deflateInit_(var strm: TZStreamRec; level: Integer; version: PChar; + recsize: Integer): Integer; external; +function deflate(var strm: TZStreamRec; flush: Integer): Integer; external; +function deflateEnd(var strm: TZStreamRec): Integer; external; + +// inflate decompresses data +function inflateInit_(var strm: TZStreamRec; version: PChar; + recsize: Integer): Integer; external; +function inflate(var strm: TZStreamRec; flush: Integer): Integer; external; +function inflateEnd(var strm: TZStreamRec): Integer; external; +function inflateReset(var strm: TZStreamRec): Integer; external; + + +function zlibAllocMem(AppData: Pointer; Items, Size: Integer): Pointer; cdecl; +begin +// GetMem(Result, Items*Size); + Result := AllocMem(Items * Size); +end; + +procedure zlibFreeMem(AppData, Block: Pointer); cdecl; +begin + FreeMem(Block); +end; + +{function zlibCheck(code: Integer): Integer; +begin + Result := code; + if code < 0 then + raise EZlibError.Create('error'); //!! +end;} + +function CCheck(code: Integer): Integer; +begin + Result := code; + if code < 0 then + raise ECompressionError.Create('error'); //!! +end; + +function DCheck(code: Integer): Integer; +begin + Result := code; + if code < 0 then + raise EDecompressionError.Create('error'); //!! +end; + +procedure CompressBuf(const InBuf: Pointer; InBytes: Integer; + out OutBuf: Pointer; out OutBytes: Integer); +var + strm: TZStreamRec; + P: Pointer; +begin + FillChar(strm, sizeof(strm), 0); + strm.zalloc := zlibAllocMem; + strm.zfree := zlibFreeMem; + OutBytes := ((InBytes + (InBytes div 10) + 12) + 255) and not 255; + GetMem(OutBuf, OutBytes); + try + strm.next_in := InBuf; + strm.avail_in := InBytes; + strm.next_out := OutBuf; + strm.avail_out := OutBytes; + CCheck(deflateInit_(strm, Z_BEST_COMPRESSION, zlib_version, sizeof(strm))); + try + while CCheck(deflate(strm, Z_FINISH)) <> Z_STREAM_END do + begin + P := OutBuf; + Inc(OutBytes, 256); + ReallocMem(OutBuf, OutBytes); + strm.next_out := PChar(Integer(OutBuf) + (Integer(strm.next_out) - Integer(P))); + strm.avail_out := 256; + end; + finally + CCheck(deflateEnd(strm)); + end; + ReallocMem(OutBuf, strm.total_out); + OutBytes := strm.total_out; + except + FreeMem(OutBuf); + raise + end; +end; + + +procedure DecompressBuf(const InBuf: Pointer; InBytes: Integer; + OutEstimate: Integer; out OutBuf: Pointer; out OutBytes: Integer); +var + strm: TZStreamRec; + P: Pointer; + BufInc: Integer; +begin + FillChar(strm, sizeof(strm), 0); + strm.zalloc := zlibAllocMem; + strm.zfree := zlibFreeMem; + BufInc := (InBytes + 255) and not 255; + if OutEstimate = 0 then + OutBytes := BufInc + else + OutBytes := OutEstimate; + GetMem(OutBuf, OutBytes); + try + strm.next_in := InBuf; + strm.avail_in := InBytes; + strm.next_out := OutBuf; + strm.avail_out := OutBytes; + DCheck(inflateInit_(strm, zlib_version, sizeof(strm))); + try + while DCheck(inflate(strm, Z_NO_FLUSH)) <> Z_STREAM_END do + begin + P := OutBuf; + Inc(OutBytes, BufInc); + ReallocMem(OutBuf, OutBytes); + strm.next_out := PChar(Integer(OutBuf) + (Integer(strm.next_out) - Integer(P))); + strm.avail_out := BufInc; + end; + finally + DCheck(inflateEnd(strm)); + end; + ReallocMem(OutBuf, strm.total_out); + OutBytes := strm.total_out; + except + FreeMem(OutBuf); + raise + end; +end; + +procedure DecompressToUserBuf(const InBuf: Pointer; InBytes: Integer; + const OutBuf: Pointer; BufSize: Integer); +var + strm: TZStreamRec; +begin + FillChar(strm, sizeof(strm), 0); + strm.zalloc := zlibAllocMem; + strm.zfree := zlibFreeMem; + strm.next_in := InBuf; + strm.avail_in := InBytes; + strm.next_out := OutBuf; + strm.avail_out := BufSize; + DCheck(inflateInit_(strm, zlib_version, sizeof(strm))); + try + if DCheck(inflate(strm, Z_FINISH)) <> Z_STREAM_END then + raise EZlibError.CreateRes(@sTargetBufferTooSmall); + finally + DCheck(inflateEnd(strm)); + end; +end; + +// TCustomZlibStream + +constructor TCustomZLibStream.Create(Strm: TStream); +begin + inherited Create; + FStrm := Strm; + FStrmPos := Strm.Position; + FZRec.zalloc := zlibAllocMem; + FZRec.zfree := zlibFreeMem; +end; + +procedure TCustomZLibStream.Progress(Sender: TObject); +begin + if Assigned(FOnProgress) then FOnProgress(Sender); +end; + + +// TCompressionStream + +constructor TCompressionStream.Create(CompressionLevel: TCompressionLevel; + Dest: TStream); +const + Levels: array [TCompressionLevel] of ShortInt = + (Z_NO_COMPRESSION, Z_BEST_SPEED, Z_DEFAULT_COMPRESSION, Z_BEST_COMPRESSION); +begin + inherited Create(Dest); + FZRec.next_out := FBuffer; + FZRec.avail_out := sizeof(FBuffer); + CCheck(deflateInit_(FZRec, Levels[CompressionLevel], zlib_version, sizeof(FZRec))); +end; + +destructor TCompressionStream.Destroy; +begin + FZRec.next_in := nil; + FZRec.avail_in := 0; + try + if FStrm.Position <> FStrmPos then FStrm.Position := FStrmPos; + while (CCheck(deflate(FZRec, Z_FINISH)) <> Z_STREAM_END) + and (FZRec.avail_out = 0) do + begin + FStrm.WriteBuffer(FBuffer, sizeof(FBuffer)); + FZRec.next_out := FBuffer; + FZRec.avail_out := sizeof(FBuffer); + end; + if FZRec.avail_out < sizeof(FBuffer) then + FStrm.WriteBuffer(FBuffer, sizeof(FBuffer) - FZRec.avail_out); + finally + deflateEnd(FZRec); + end; + inherited Destroy; +end; + +function TCompressionStream.Read(var Buffer; Count: Longint): Longint; +begin + raise ECompressionError.CreateRes(@sInvalidStreamOp); +end; + +function TCompressionStream.Write(const Buffer; Count: Longint): Longint; +begin + FZRec.next_in := @Buffer; + FZRec.avail_in := Count; + if FStrm.Position <> FStrmPos then FStrm.Position := FStrmPos; + while (FZRec.avail_in > 0) do + begin + CCheck(deflate(FZRec, 0)); + if FZRec.avail_out = 0 then + begin + FStrm.WriteBuffer(FBuffer, sizeof(FBuffer)); + FZRec.next_out := FBuffer; + FZRec.avail_out := sizeof(FBuffer); + FStrmPos := FStrm.Position; + Progress(Self); + end; + end; + Result := Count; +end; + +function TCompressionStream.Seek(Offset: Longint; Origin: Word): Longint; +begin + if (Offset = 0) and (Origin = soFromCurrent) then + Result := FZRec.total_in + else + raise ECompressionError.CreateRes(@sInvalidStreamOp); +end; + +function TCompressionStream.GetCompressionRate: Single; +begin + if FZRec.total_in = 0 then + Result := 0 + else + Result := (1.0 - (FZRec.total_out / FZRec.total_in)) * 100.0; +end; + + +// TDecompressionStream + +constructor TDecompressionStream.Create(Source: TStream); +begin + inherited Create(Source); + FZRec.next_in := FBuffer; + FZRec.avail_in := 0; + DCheck(inflateInit_(FZRec, zlib_version, sizeof(FZRec))); +end; + +destructor TDecompressionStream.Destroy; +begin + FStrm.Seek(-FZRec.avail_in, 1); + inflateEnd(FZRec); + inherited Destroy; +end; + +function TDecompressionStream.Read(var Buffer; Count: Longint): Longint; +begin + FZRec.next_out := @Buffer; + FZRec.avail_out := Count; + if FStrm.Position <> FStrmPos then FStrm.Position := FStrmPos; + while (FZRec.avail_out > 0) do + begin + if FZRec.avail_in = 0 then + begin + FZRec.avail_in := FStrm.Read(FBuffer, sizeof(FBuffer)); + if FZRec.avail_in = 0 then + begin + Result := Count - FZRec.avail_out; + Exit; + end; + FZRec.next_in := FBuffer; + FStrmPos := FStrm.Position; + Progress(Self); + end; + CCheck(inflate(FZRec, 0)); + end; + Result := Count; +end; + +function TDecompressionStream.Write(const Buffer; Count: Longint): Longint; +begin + raise EDecompressionError.CreateRes(@sInvalidStreamOp); +end; + +function TDecompressionStream.Seek(Offset: Longint; Origin: Word): Longint; +var + I: Integer; + Buf: array [0..4095] of Char; +begin + if (Offset = 0) and (Origin = soFromBeginning) then + begin + DCheck(inflateReset(FZRec)); + FZRec.next_in := FBuffer; + FZRec.avail_in := 0; + FStrm.Position := 0; + FStrmPos := 0; + end + else if ( (Offset >= 0) and (Origin = soFromCurrent)) or + ( ((Offset - FZRec.total_out) > 0) and (Origin = soFromBeginning)) then + begin + if Origin = soFromBeginning then Dec(Offset, FZRec.total_out); + if Offset > 0 then + begin + for I := 1 to Offset div sizeof(Buf) do + ReadBuffer(Buf, sizeof(Buf)); + ReadBuffer(Buf, Offset mod sizeof(Buf)); + end; + end + else + raise EDecompressionError.CreateRes(@sInvalidStreamOp); + Result := FZRec.total_out; +end; + + +end. diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/delphi/ZLibConst.pas b/software/scsi2sd-util/zlib-1.2.8/contrib/delphi/ZLibConst.pas new file mode 100644 index 0000000..cdfe136 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/delphi/ZLibConst.pas @@ -0,0 +1,11 @@ +unit ZLibConst; + +interface + +resourcestring + sTargetBufferTooSmall = 'ZLib error: target buffer may be too small'; + sInvalidStreamOp = 'Invalid stream operation'; + +implementation + +end. diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/delphi/readme.txt b/software/scsi2sd-util/zlib-1.2.8/contrib/delphi/readme.txt new file mode 100644 index 0000000..2dc9a8b --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/delphi/readme.txt @@ -0,0 +1,76 @@ + +Overview +======== + +This directory contains an update to the ZLib interface unit, +distributed by Borland as a Delphi supplemental component. + +The original ZLib unit is Copyright (c) 1997,99 Borland Corp., +and is based on zlib version 1.0.4. There are a series of bugs +and security problems associated with that old zlib version, and +we recommend the users to update their ZLib unit. + + +Summary of modifications +======================== + +- Improved makefile, adapted to zlib version 1.2.1. + +- Some field types from TZStreamRec are changed from Integer to + Longint, for consistency with the zlib.h header, and for 64-bit + readiness. + +- The zlib_version constant is updated. + +- The new Z_RLE strategy has its corresponding symbolic constant. + +- The allocation and deallocation functions and function types + (TAlloc, TFree, zlibAllocMem and zlibFreeMem) are now cdecl, + and _malloc and _free are added as C RTL stubs. As a result, + the original C sources of zlib can be compiled out of the box, + and linked to the ZLib unit. + + +Suggestions for improvements +============================ + +Currently, the ZLib unit provides only a limited wrapper around +the zlib library, and much of the original zlib functionality is +missing. Handling compressed file formats like ZIP/GZIP or PNG +cannot be implemented without having this functionality. +Applications that handle these formats are either using their own, +duplicated code, or not using the ZLib unit at all. + +Here are a few suggestions: + +- Checksum class wrappers around adler32() and crc32(), similar + to the Java classes that implement the java.util.zip.Checksum + interface. + +- The ability to read and write raw deflate streams, without the + zlib stream header and trailer. Raw deflate streams are used + in the ZIP file format. + +- The ability to read and write gzip streams, used in the GZIP + file format, and normally produced by the gzip program. + +- The ability to select a different compression strategy, useful + to PNG and MNG image compression, and to multimedia compression + in general. Besides the compression level + + TCompressionLevel = (clNone, clFastest, clDefault, clMax); + + which, in fact, could have used the 'z' prefix and avoided + TColor-like symbols + + TCompressionLevel = (zcNone, zcFastest, zcDefault, zcMax); + + there could be a compression strategy + + TCompressionStrategy = (zsDefault, zsFiltered, zsHuffmanOnly, zsRle); + +- ZIP and GZIP stream handling via TStreams. + + +-- +Cosmin Truta diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/delphi/zlibd32.mak b/software/scsi2sd-util/zlib-1.2.8/contrib/delphi/zlibd32.mak new file mode 100644 index 0000000..9bb00b7 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/delphi/zlibd32.mak @@ -0,0 +1,99 @@ +# Makefile for zlib +# For use with Delphi and C++ Builder under Win32 +# Updated for zlib 1.2.x by Cosmin Truta + +# ------------ Borland C++ ------------ + +# This project uses the Delphi (fastcall/register) calling convention: +LOC = -DZEXPORT=__fastcall -DZEXPORTVA=__cdecl + +CC = bcc32 +LD = bcc32 +AR = tlib +# do not use "-pr" in CFLAGS +CFLAGS = -a -d -k- -O2 $(LOC) +LDFLAGS = + + +# variables +ZLIB_LIB = zlib.lib + +OBJ1 = adler32.obj compress.obj crc32.obj deflate.obj gzclose.obj gzlib.obj gzread.obj +OBJ2 = gzwrite.obj infback.obj inffast.obj inflate.obj inftrees.obj trees.obj uncompr.obj zutil.obj +OBJP1 = +adler32.obj+compress.obj+crc32.obj+deflate.obj+gzclose.obj+gzlib.obj+gzread.obj +OBJP2 = +gzwrite.obj+infback.obj+inffast.obj+inflate.obj+inftrees.obj+trees.obj+uncompr.obj+zutil.obj + + +# targets +all: $(ZLIB_LIB) example.exe minigzip.exe + +.c.obj: + $(CC) -c $(CFLAGS) $*.c + +adler32.obj: adler32.c zlib.h zconf.h + +compress.obj: compress.c zlib.h zconf.h + +crc32.obj: crc32.c zlib.h zconf.h crc32.h + +deflate.obj: deflate.c deflate.h zutil.h zlib.h zconf.h + +gzclose.obj: gzclose.c zlib.h zconf.h gzguts.h + +gzlib.obj: gzlib.c zlib.h zconf.h gzguts.h + +gzread.obj: gzread.c zlib.h zconf.h gzguts.h + +gzwrite.obj: gzwrite.c zlib.h zconf.h gzguts.h + +infback.obj: infback.c zutil.h zlib.h zconf.h inftrees.h inflate.h \ + inffast.h inffixed.h + +inffast.obj: inffast.c zutil.h zlib.h zconf.h inftrees.h inflate.h \ + inffast.h + +inflate.obj: inflate.c zutil.h zlib.h zconf.h inftrees.h inflate.h \ + inffast.h inffixed.h + +inftrees.obj: inftrees.c zutil.h zlib.h zconf.h inftrees.h + +trees.obj: trees.c zutil.h zlib.h zconf.h deflate.h trees.h + +uncompr.obj: uncompr.c zlib.h zconf.h + +zutil.obj: zutil.c zutil.h zlib.h zconf.h + +example.obj: test/example.c zlib.h zconf.h + +minigzip.obj: test/minigzip.c zlib.h zconf.h + + +# For the sake of the old Borland make, +# the command line is cut to fit in the MS-DOS 128 byte limit: +$(ZLIB_LIB): $(OBJ1) $(OBJ2) + -del $(ZLIB_LIB) + $(AR) $(ZLIB_LIB) $(OBJP1) + $(AR) $(ZLIB_LIB) $(OBJP2) + + +# testing +test: example.exe minigzip.exe + example + echo hello world | minigzip | minigzip -d + +example.exe: example.obj $(ZLIB_LIB) + $(LD) $(LDFLAGS) example.obj $(ZLIB_LIB) + +minigzip.exe: minigzip.obj $(ZLIB_LIB) + $(LD) $(LDFLAGS) minigzip.obj $(ZLIB_LIB) + + +# cleanup +clean: + -del *.obj + -del *.exe + -del *.lib + -del *.tds + -del zlib.bak + -del foo.gz + diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/dotzlib/DotZLib.build b/software/scsi2sd-util/zlib-1.2.8/contrib/dotzlib/DotZLib.build new file mode 100644 index 0000000..e69630c --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/dotzlib/DotZLib.build @@ -0,0 +1,33 @@ + + + A .Net wrapper library around ZLib1.dll + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + \ No newline at end of file diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/dotzlib/DotZLib.chm b/software/scsi2sd-util/zlib-1.2.8/contrib/dotzlib/DotZLib.chm new file mode 100644 index 0000000..f214a44 Binary files /dev/null and b/software/scsi2sd-util/zlib-1.2.8/contrib/dotzlib/DotZLib.chm differ diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/dotzlib/DotZLib.sln b/software/scsi2sd-util/zlib-1.2.8/contrib/dotzlib/DotZLib.sln new file mode 100644 index 0000000..5d533d6 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/dotzlib/DotZLib.sln @@ -0,0 +1,21 @@ +Microsoft Visual Studio Solution File, Format Version 8.00 +Project("{FAE04EC0-301F-11D3-BF4B-00C04F79EFBC}") = "DotZLib", "DotZLib\DotZLib.csproj", "{BB1EE0B1-1808-46CB-B786-949D91117FC5}" + ProjectSection(ProjectDependencies) = postProject + EndProjectSection +EndProject +Global + GlobalSection(SolutionConfiguration) = preSolution + Debug = Debug + Release = Release + EndGlobalSection + GlobalSection(ProjectConfiguration) = postSolution + {BB1EE0B1-1808-46CB-B786-949D91117FC5}.Debug.ActiveCfg = Debug|.NET + {BB1EE0B1-1808-46CB-B786-949D91117FC5}.Debug.Build.0 = Debug|.NET + {BB1EE0B1-1808-46CB-B786-949D91117FC5}.Release.ActiveCfg = Release|.NET + {BB1EE0B1-1808-46CB-B786-949D91117FC5}.Release.Build.0 = Release|.NET + EndGlobalSection + GlobalSection(ExtensibilityGlobals) = postSolution + EndGlobalSection + GlobalSection(ExtensibilityAddIns) = postSolution + EndGlobalSection +EndGlobal diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/dotzlib/DotZLib/AssemblyInfo.cs b/software/scsi2sd-util/zlib-1.2.8/contrib/dotzlib/DotZLib/AssemblyInfo.cs new file mode 100644 index 0000000..724c534 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/dotzlib/DotZLib/AssemblyInfo.cs @@ -0,0 +1,58 @@ +using System.Reflection; +using System.Runtime.CompilerServices; + +// +// General Information about an assembly is controlled through the following +// set of attributes. Change these attribute values to modify the information +// associated with an assembly. +// +[assembly: AssemblyTitle("DotZLib")] +[assembly: AssemblyDescription(".Net bindings for ZLib compression dll 1.2.x")] +[assembly: AssemblyConfiguration("")] +[assembly: AssemblyCompany("Henrik Ravn")] +[assembly: AssemblyProduct("")] +[assembly: AssemblyCopyright("(c) 2004 by Henrik Ravn")] +[assembly: AssemblyTrademark("")] +[assembly: AssemblyCulture("")] + +// +// Version information for an assembly consists of the following four values: +// +// Major Version +// Minor Version +// Build Number +// Revision +// +// You can specify all the values or you can default the Revision and Build Numbers +// by using the '*' as shown below: + +[assembly: AssemblyVersion("1.0.*")] + +// +// In order to sign your assembly you must specify a key to use. Refer to the +// Microsoft .NET Framework documentation for more information on assembly signing. +// +// Use the attributes below to control which key is used for signing. +// +// Notes: +// (*) If no key is specified, the assembly is not signed. +// (*) KeyName refers to a key that has been installed in the Crypto Service +// Provider (CSP) on your machine. KeyFile refers to a file which contains +// a key. +// (*) If the KeyFile and the KeyName values are both specified, the +// following processing occurs: +// (1) If the KeyName can be found in the CSP, that key is used. +// (2) If the KeyName does not exist and the KeyFile does exist, the key +// in the KeyFile is installed into the CSP and used. +// (*) In order to create a KeyFile, you can use the sn.exe (Strong Name) utility. +// When specifying the KeyFile, the location of the KeyFile should be +// relative to the project output directory which is +// %Project Directory%\obj\. For example, if your KeyFile is +// located in the project directory, you would specify the AssemblyKeyFile +// attribute as [assembly: AssemblyKeyFile("..\\..\\mykey.snk")] +// (*) Delay Signing is an advanced option - see the Microsoft .NET Framework +// documentation for more information on this. +// +[assembly: AssemblyDelaySign(false)] +[assembly: AssemblyKeyFile("")] +[assembly: AssemblyKeyName("")] diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/dotzlib/DotZLib/ChecksumImpl.cs b/software/scsi2sd-util/zlib-1.2.8/contrib/dotzlib/DotZLib/ChecksumImpl.cs new file mode 100644 index 0000000..b110dae --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/dotzlib/DotZLib/ChecksumImpl.cs @@ -0,0 +1,202 @@ +// +// © Copyright Henrik Ravn 2004 +// +// Use, modification and distribution are subject to the Boost Software License, Version 1.0. +// (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt) +// + +using System; +using System.Runtime.InteropServices; +using System.Text; + + +namespace DotZLib +{ + #region ChecksumGeneratorBase + /// + /// Implements the common functionality needed for all s + /// + /// + public abstract class ChecksumGeneratorBase : ChecksumGenerator + { + /// + /// The value of the current checksum + /// + protected uint _current; + + /// + /// Initializes a new instance of the checksum generator base - the current checksum is + /// set to zero + /// + public ChecksumGeneratorBase() + { + _current = 0; + } + + /// + /// Initializes a new instance of the checksum generator basewith a specified value + /// + /// The value to set the current checksum to + public ChecksumGeneratorBase(uint initialValue) + { + _current = initialValue; + } + + /// + /// Resets the current checksum to zero + /// + public void Reset() { _current = 0; } + + /// + /// Gets the current checksum value + /// + public uint Value { get { return _current; } } + + /// + /// Updates the current checksum with part of an array of bytes + /// + /// The data to update the checksum with + /// Where in data to start updating + /// The number of bytes from data to use + /// The sum of offset and count is larger than the length of data + /// data is a null reference + /// Offset or count is negative. + /// All the other Update methods are implmeneted in terms of this one. + /// This is therefore the only method a derived class has to implement + public abstract void Update(byte[] data, int offset, int count); + + /// + /// Updates the current checksum with an array of bytes. + /// + /// The data to update the checksum with + public void Update(byte[] data) + { + Update(data, 0, data.Length); + } + + /// + /// Updates the current checksum with the data from a string + /// + /// The string to update the checksum with + /// The characters in the string are converted by the UTF-8 encoding + public void Update(string data) + { + Update(Encoding.UTF8.GetBytes(data)); + } + + /// + /// Updates the current checksum with the data from a string, using a specific encoding + /// + /// The string to update the checksum with + /// The encoding to use + public void Update(string data, Encoding encoding) + { + Update(encoding.GetBytes(data)); + } + + } + #endregion + + #region CRC32 + /// + /// Implements a CRC32 checksum generator + /// + public sealed class CRC32Checksum : ChecksumGeneratorBase + { + #region DLL imports + + [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)] + private static extern uint crc32(uint crc, int data, uint length); + + #endregion + + /// + /// Initializes a new instance of the CRC32 checksum generator + /// + public CRC32Checksum() : base() {} + + /// + /// Initializes a new instance of the CRC32 checksum generator with a specified value + /// + /// The value to set the current checksum to + public CRC32Checksum(uint initialValue) : base(initialValue) {} + + /// + /// Updates the current checksum with part of an array of bytes + /// + /// The data to update the checksum with + /// Where in data to start updating + /// The number of bytes from data to use + /// The sum of offset and count is larger than the length of data + /// data is a null reference + /// Offset or count is negative. + public override void Update(byte[] data, int offset, int count) + { + if (offset < 0 || count < 0) throw new ArgumentOutOfRangeException(); + if ((offset+count) > data.Length) throw new ArgumentException(); + GCHandle hData = GCHandle.Alloc(data, GCHandleType.Pinned); + try + { + _current = crc32(_current, hData.AddrOfPinnedObject().ToInt32()+offset, (uint)count); + } + finally + { + hData.Free(); + } + } + + } + #endregion + + #region Adler + /// + /// Implements a checksum generator that computes the Adler checksum on data + /// + public sealed class AdlerChecksum : ChecksumGeneratorBase + { + #region DLL imports + + [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)] + private static extern uint adler32(uint adler, int data, uint length); + + #endregion + + /// + /// Initializes a new instance of the Adler checksum generator + /// + public AdlerChecksum() : base() {} + + /// + /// Initializes a new instance of the Adler checksum generator with a specified value + /// + /// The value to set the current checksum to + public AdlerChecksum(uint initialValue) : base(initialValue) {} + + /// + /// Updates the current checksum with part of an array of bytes + /// + /// The data to update the checksum with + /// Where in data to start updating + /// The number of bytes from data to use + /// The sum of offset and count is larger than the length of data + /// data is a null reference + /// Offset or count is negative. + public override void Update(byte[] data, int offset, int count) + { + if (offset < 0 || count < 0) throw new ArgumentOutOfRangeException(); + if ((offset+count) > data.Length) throw new ArgumentException(); + GCHandle hData = GCHandle.Alloc(data, GCHandleType.Pinned); + try + { + _current = adler32(_current, hData.AddrOfPinnedObject().ToInt32()+offset, (uint)count); + } + finally + { + hData.Free(); + } + } + + } + #endregion + +} \ No newline at end of file diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/dotzlib/DotZLib/CircularBuffer.cs b/software/scsi2sd-util/zlib-1.2.8/contrib/dotzlib/DotZLib/CircularBuffer.cs new file mode 100644 index 0000000..9c8d601 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/dotzlib/DotZLib/CircularBuffer.cs @@ -0,0 +1,83 @@ +// +// © Copyright Henrik Ravn 2004 +// +// Use, modification and distribution are subject to the Boost Software License, Version 1.0. +// (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt) +// + +using System; +using System.Diagnostics; + +namespace DotZLib +{ + + /// + /// This class implements a circular buffer + /// + internal class CircularBuffer + { + #region Private data + private int _capacity; + private int _head; + private int _tail; + private int _size; + private byte[] _buffer; + #endregion + + public CircularBuffer(int capacity) + { + Debug.Assert( capacity > 0 ); + _buffer = new byte[capacity]; + _capacity = capacity; + _head = 0; + _tail = 0; + _size = 0; + } + + public int Size { get { return _size; } } + + public int Put(byte[] source, int offset, int count) + { + Debug.Assert( count > 0 ); + int trueCount = Math.Min(count, _capacity - Size); + for (int i = 0; i < trueCount; ++i) + _buffer[(_tail+i) % _capacity] = source[offset+i]; + _tail += trueCount; + _tail %= _capacity; + _size += trueCount; + return trueCount; + } + + public bool Put(byte b) + { + if (Size == _capacity) // no room + return false; + _buffer[_tail++] = b; + _tail %= _capacity; + ++_size; + return true; + } + + public int Get(byte[] destination, int offset, int count) + { + int trueCount = Math.Min(count,Size); + for (int i = 0; i < trueCount; ++i) + destination[offset + i] = _buffer[(_head+i) % _capacity]; + _head += trueCount; + _head %= _capacity; + _size -= trueCount; + return trueCount; + } + + public int Get() + { + if (Size == 0) + return -1; + + int result = (int)_buffer[_head++ % _capacity]; + --_size; + return result; + } + + } +} diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/dotzlib/DotZLib/CodecBase.cs b/software/scsi2sd-util/zlib-1.2.8/contrib/dotzlib/DotZLib/CodecBase.cs new file mode 100644 index 0000000..b0eb78a --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/dotzlib/DotZLib/CodecBase.cs @@ -0,0 +1,198 @@ +// +// © Copyright Henrik Ravn 2004 +// +// Use, modification and distribution are subject to the Boost Software License, Version 1.0. +// (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt) +// + +using System; +using System.Runtime.InteropServices; + +namespace DotZLib +{ + /// + /// Implements the common functionality needed for all s + /// + public abstract class CodecBase : Codec, IDisposable + { + + #region Data members + + /// + /// Instance of the internal zlib buffer structure that is + /// passed to all functions in the zlib dll + /// + internal ZStream _ztream = new ZStream(); + + /// + /// True if the object instance has been disposed, false otherwise + /// + protected bool _isDisposed = false; + + /// + /// The size of the internal buffers + /// + protected const int kBufferSize = 16384; + + private byte[] _outBuffer = new byte[kBufferSize]; + private byte[] _inBuffer = new byte[kBufferSize]; + + private GCHandle _hInput; + private GCHandle _hOutput; + + private uint _checksum = 0; + + #endregion + + /// + /// Initializes a new instance of the CodeBase class. + /// + public CodecBase() + { + try + { + _hInput = GCHandle.Alloc(_inBuffer, GCHandleType.Pinned); + _hOutput = GCHandle.Alloc(_outBuffer, GCHandleType.Pinned); + } + catch (Exception) + { + CleanUp(false); + throw; + } + } + + + #region Codec Members + + /// + /// Occurs when more processed data are available. + /// + public event DataAvailableHandler DataAvailable; + + /// + /// Fires the event + /// + protected void OnDataAvailable() + { + if (_ztream.total_out > 0) + { + if (DataAvailable != null) + DataAvailable( _outBuffer, 0, (int)_ztream.total_out); + resetOutput(); + } + } + + /// + /// Adds more data to the codec to be processed. + /// + /// Byte array containing the data to be added to the codec + /// Adding data may, or may not, raise the DataAvailable event + public void Add(byte[] data) + { + Add(data,0,data.Length); + } + + /// + /// Adds more data to the codec to be processed. + /// + /// Byte array containing the data to be added to the codec + /// The index of the first byte to add from data + /// The number of bytes to add + /// Adding data may, or may not, raise the DataAvailable event + /// This must be implemented by a derived class + public abstract void Add(byte[] data, int offset, int count); + + /// + /// Finishes up any pending data that needs to be processed and handled. + /// + /// This must be implemented by a derived class + public abstract void Finish(); + + /// + /// Gets the checksum of the data that has been added so far + /// + public uint Checksum { get { return _checksum; } } + + #endregion + + #region Destructor & IDisposable stuff + + /// + /// Destroys this instance + /// + ~CodecBase() + { + CleanUp(false); + } + + /// + /// Releases any unmanaged resources and calls the method of the derived class + /// + public void Dispose() + { + CleanUp(true); + } + + /// + /// Performs any codec specific cleanup + /// + /// This must be implemented by a derived class + protected abstract void CleanUp(); + + // performs the release of the handles and calls the dereived CleanUp() + private void CleanUp(bool isDisposing) + { + if (!_isDisposed) + { + CleanUp(); + if (_hInput.IsAllocated) + _hInput.Free(); + if (_hOutput.IsAllocated) + _hOutput.Free(); + + _isDisposed = true; + } + } + + + #endregion + + #region Helper methods + + /// + /// Copies a number of bytes to the internal codec buffer - ready for proccesing + /// + /// The byte array that contains the data to copy + /// The index of the first byte to copy + /// The number of bytes to copy from data + protected void copyInput(byte[] data, int startIndex, int count) + { + Array.Copy(data, startIndex, _inBuffer,0, count); + _ztream.next_in = _hInput.AddrOfPinnedObject(); + _ztream.total_in = 0; + _ztream.avail_in = (uint)count; + + } + + /// + /// Resets the internal output buffers to a known state - ready for processing + /// + protected void resetOutput() + { + _ztream.total_out = 0; + _ztream.avail_out = kBufferSize; + _ztream.next_out = _hOutput.AddrOfPinnedObject(); + } + + /// + /// Updates the running checksum property + /// + /// The new checksum value + protected void setChecksum(uint newSum) + { + _checksum = newSum; + } + #endregion + + } +} diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/dotzlib/DotZLib/Deflater.cs b/software/scsi2sd-util/zlib-1.2.8/contrib/dotzlib/DotZLib/Deflater.cs new file mode 100644 index 0000000..9039f41 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/dotzlib/DotZLib/Deflater.cs @@ -0,0 +1,106 @@ +// +// © Copyright Henrik Ravn 2004 +// +// Use, modification and distribution are subject to the Boost Software License, Version 1.0. +// (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt) +// + +using System; +using System.Diagnostics; +using System.Runtime.InteropServices; + +namespace DotZLib +{ + + /// + /// Implements a data compressor, using the deflate algorithm in the ZLib dll + /// + public sealed class Deflater : CodecBase + { + #region Dll imports + [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl, CharSet=CharSet.Ansi)] + private static extern int deflateInit_(ref ZStream sz, int level, string vs, int size); + + [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)] + private static extern int deflate(ref ZStream sz, int flush); + + [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)] + private static extern int deflateReset(ref ZStream sz); + + [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)] + private static extern int deflateEnd(ref ZStream sz); + #endregion + + /// + /// Constructs an new instance of the Deflater + /// + /// The compression level to use for this Deflater + public Deflater(CompressLevel level) : base() + { + int retval = deflateInit_(ref _ztream, (int)level, Info.Version, Marshal.SizeOf(_ztream)); + if (retval != 0) + throw new ZLibException(retval, "Could not initialize deflater"); + + resetOutput(); + } + + /// + /// Adds more data to the codec to be processed. + /// + /// Byte array containing the data to be added to the codec + /// The index of the first byte to add from data + /// The number of bytes to add + /// Adding data may, or may not, raise the DataAvailable event + public override void Add(byte[] data, int offset, int count) + { + if (data == null) throw new ArgumentNullException(); + if (offset < 0 || count < 0) throw new ArgumentOutOfRangeException(); + if ((offset+count) > data.Length) throw new ArgumentException(); + + int total = count; + int inputIndex = offset; + int err = 0; + + while (err >= 0 && inputIndex < total) + { + copyInput(data, inputIndex, Math.Min(total - inputIndex, kBufferSize)); + while (err >= 0 && _ztream.avail_in > 0) + { + err = deflate(ref _ztream, (int)FlushTypes.None); + if (err == 0) + while (_ztream.avail_out == 0) + { + OnDataAvailable(); + err = deflate(ref _ztream, (int)FlushTypes.None); + } + inputIndex += (int)_ztream.total_in; + } + } + setChecksum( _ztream.adler ); + } + + + /// + /// Finishes up any pending data that needs to be processed and handled. + /// + public override void Finish() + { + int err; + do + { + err = deflate(ref _ztream, (int)FlushTypes.Finish); + OnDataAvailable(); + } + while (err == 0); + setChecksum( _ztream.adler ); + deflateReset(ref _ztream); + resetOutput(); + } + + /// + /// Closes the internal zlib deflate stream + /// + protected override void CleanUp() { deflateEnd(ref _ztream); } + + } +} diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/dotzlib/DotZLib/DotZLib.cs b/software/scsi2sd-util/zlib-1.2.8/contrib/dotzlib/DotZLib/DotZLib.cs new file mode 100644 index 0000000..90c7c3b --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/dotzlib/DotZLib/DotZLib.cs @@ -0,0 +1,288 @@ +// +// © Copyright Henrik Ravn 2004 +// +// Use, modification and distribution are subject to the Boost Software License, Version 1.0. +// (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt) +// + +using System; +using System.IO; +using System.Runtime.InteropServices; +using System.Text; + + +namespace DotZLib +{ + + #region Internal types + + /// + /// Defines constants for the various flush types used with zlib + /// + internal enum FlushTypes + { + None, Partial, Sync, Full, Finish, Block + } + + #region ZStream structure + // internal mapping of the zlib zstream structure for marshalling + [StructLayoutAttribute(LayoutKind.Sequential, Pack=4, Size=0, CharSet=CharSet.Ansi)] + internal struct ZStream + { + public IntPtr next_in; + public uint avail_in; + public uint total_in; + + public IntPtr next_out; + public uint avail_out; + public uint total_out; + + [MarshalAs(UnmanagedType.LPStr)] + string msg; + uint state; + + uint zalloc; + uint zfree; + uint opaque; + + int data_type; + public uint adler; + uint reserved; + } + + #endregion + + #endregion + + #region Public enums + /// + /// Defines constants for the available compression levels in zlib + /// + public enum CompressLevel : int + { + /// + /// The default compression level with a reasonable compromise between compression and speed + /// + Default = -1, + /// + /// No compression at all. The data are passed straight through. + /// + None = 0, + /// + /// The maximum compression rate available. + /// + Best = 9, + /// + /// The fastest available compression level. + /// + Fastest = 1 + } + #endregion + + #region Exception classes + /// + /// The exception that is thrown when an error occurs on the zlib dll + /// + public class ZLibException : ApplicationException + { + /// + /// Initializes a new instance of the class with a specified + /// error message and error code + /// + /// The zlib error code that caused the exception + /// A message that (hopefully) describes the error + public ZLibException(int errorCode, string msg) : base(String.Format("ZLib error {0} {1}", errorCode, msg)) + { + } + + /// + /// Initializes a new instance of the class with a specified + /// error code + /// + /// The zlib error code that caused the exception + public ZLibException(int errorCode) : base(String.Format("ZLib error {0}", errorCode)) + { + } + } + #endregion + + #region Interfaces + + /// + /// Declares methods and properties that enables a running checksum to be calculated + /// + public interface ChecksumGenerator + { + /// + /// Gets the current value of the checksum + /// + uint Value { get; } + + /// + /// Clears the current checksum to 0 + /// + void Reset(); + + /// + /// Updates the current checksum with an array of bytes + /// + /// The data to update the checksum with + void Update(byte[] data); + + /// + /// Updates the current checksum with part of an array of bytes + /// + /// The data to update the checksum with + /// Where in data to start updating + /// The number of bytes from data to use + /// The sum of offset and count is larger than the length of data + /// data is a null reference + /// Offset or count is negative. + void Update(byte[] data, int offset, int count); + + /// + /// Updates the current checksum with the data from a string + /// + /// The string to update the checksum with + /// The characters in the string are converted by the UTF-8 encoding + void Update(string data); + + /// + /// Updates the current checksum with the data from a string, using a specific encoding + /// + /// The string to update the checksum with + /// The encoding to use + void Update(string data, Encoding encoding); + } + + + /// + /// Represents the method that will be called from a codec when new data + /// are available. + /// + /// The byte array containing the processed data + /// The index of the first processed byte in data + /// The number of processed bytes available + /// On return from this method, the data may be overwritten, so grab it while you can. + /// You cannot assume that startIndex will be zero. + /// + public delegate void DataAvailableHandler(byte[] data, int startIndex, int count); + + /// + /// Declares methods and events for implementing compressors/decompressors + /// + public interface Codec + { + /// + /// Occurs when more processed data are available. + /// + event DataAvailableHandler DataAvailable; + + /// + /// Adds more data to the codec to be processed. + /// + /// Byte array containing the data to be added to the codec + /// Adding data may, or may not, raise the DataAvailable event + void Add(byte[] data); + + /// + /// Adds more data to the codec to be processed. + /// + /// Byte array containing the data to be added to the codec + /// The index of the first byte to add from data + /// The number of bytes to add + /// Adding data may, or may not, raise the DataAvailable event + void Add(byte[] data, int offset, int count); + + /// + /// Finishes up any pending data that needs to be processed and handled. + /// + void Finish(); + + /// + /// Gets the checksum of the data that has been added so far + /// + uint Checksum { get; } + + + } + + #endregion + + #region Classes + /// + /// Encapsulates general information about the ZLib library + /// + public class Info + { + #region DLL imports + [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)] + private static extern uint zlibCompileFlags(); + + [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)] + private static extern string zlibVersion(); + #endregion + + #region Private stuff + private uint _flags; + + // helper function that unpacks a bitsize mask + private static int bitSize(uint bits) + { + switch (bits) + { + case 0: return 16; + case 1: return 32; + case 2: return 64; + } + return -1; + } + #endregion + + /// + /// Constructs an instance of the Info class. + /// + public Info() + { + _flags = zlibCompileFlags(); + } + + /// + /// True if the library is compiled with debug info + /// + public bool HasDebugInfo { get { return 0 != (_flags & 0x100); } } + + /// + /// True if the library is compiled with assembly optimizations + /// + public bool UsesAssemblyCode { get { return 0 != (_flags & 0x200); } } + + /// + /// Gets the size of the unsigned int that was compiled into Zlib + /// + public int SizeOfUInt { get { return bitSize(_flags & 3); } } + + /// + /// Gets the size of the unsigned long that was compiled into Zlib + /// + public int SizeOfULong { get { return bitSize((_flags >> 2) & 3); } } + + /// + /// Gets the size of the pointers that were compiled into Zlib + /// + public int SizeOfPointer { get { return bitSize((_flags >> 4) & 3); } } + + /// + /// Gets the size of the z_off_t type that was compiled into Zlib + /// + public int SizeOfOffset { get { return bitSize((_flags >> 6) & 3); } } + + /// + /// Gets the version of ZLib as a string, e.g. "1.2.1" + /// + public static string Version { get { return zlibVersion(); } } + } + + #endregion + +} diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/dotzlib/DotZLib/DotZLib.csproj b/software/scsi2sd-util/zlib-1.2.8/contrib/dotzlib/DotZLib/DotZLib.csproj new file mode 100644 index 0000000..dea7fb1 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/dotzlib/DotZLib/DotZLib.csproj @@ -0,0 +1,141 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/dotzlib/DotZLib/GZipStream.cs b/software/scsi2sd-util/zlib-1.2.8/contrib/dotzlib/DotZLib/GZipStream.cs new file mode 100644 index 0000000..f0eada1 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/dotzlib/DotZLib/GZipStream.cs @@ -0,0 +1,301 @@ +// +// © Copyright Henrik Ravn 2004 +// +// Use, modification and distribution are subject to the Boost Software License, Version 1.0. +// (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt) +// + +using System; +using System.IO; +using System.Runtime.InteropServices; + +namespace DotZLib +{ + /// + /// Implements a compressed , in GZip (.gz) format. + /// + public class GZipStream : Stream, IDisposable + { + #region Dll Imports + [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl, CharSet=CharSet.Ansi)] + private static extern IntPtr gzopen(string name, string mode); + + [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)] + private static extern int gzclose(IntPtr gzFile); + + [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)] + private static extern int gzwrite(IntPtr gzFile, int data, int length); + + [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)] + private static extern int gzread(IntPtr gzFile, int data, int length); + + [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)] + private static extern int gzgetc(IntPtr gzFile); + + [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)] + private static extern int gzputc(IntPtr gzFile, int c); + + #endregion + + #region Private data + private IntPtr _gzFile; + private bool _isDisposed = false; + private bool _isWriting; + #endregion + + #region Constructors + /// + /// Creates a new file as a writeable GZipStream + /// + /// The name of the compressed file to create + /// The compression level to use when adding data + /// If an error occurred in the internal zlib function + public GZipStream(string fileName, CompressLevel level) + { + _isWriting = true; + _gzFile = gzopen(fileName, String.Format("wb{0}", (int)level)); + if (_gzFile == IntPtr.Zero) + throw new ZLibException(-1, "Could not open " + fileName); + } + + /// + /// Opens an existing file as a readable GZipStream + /// + /// The name of the file to open + /// If an error occurred in the internal zlib function + public GZipStream(string fileName) + { + _isWriting = false; + _gzFile = gzopen(fileName, "rb"); + if (_gzFile == IntPtr.Zero) + throw new ZLibException(-1, "Could not open " + fileName); + + } + #endregion + + #region Access properties + /// + /// Returns true of this stream can be read from, false otherwise + /// + public override bool CanRead + { + get + { + return !_isWriting; + } + } + + + /// + /// Returns false. + /// + public override bool CanSeek + { + get + { + return false; + } + } + + /// + /// Returns true if this tsream is writeable, false otherwise + /// + public override bool CanWrite + { + get + { + return _isWriting; + } + } + #endregion + + #region Destructor & IDispose stuff + + /// + /// Destroys this instance + /// + ~GZipStream() + { + cleanUp(false); + } + + /// + /// Closes the external file handle + /// + public void Dispose() + { + cleanUp(true); + } + + // Does the actual closing of the file handle. + private void cleanUp(bool isDisposing) + { + if (!_isDisposed) + { + gzclose(_gzFile); + _isDisposed = true; + } + } + #endregion + + #region Basic reading and writing + /// + /// Attempts to read a number of bytes from the stream. + /// + /// The destination data buffer + /// The index of the first destination byte in buffer + /// The number of bytes requested + /// The number of bytes read + /// If buffer is null + /// If count or offset are negative + /// If offset + count is > buffer.Length + /// If this stream is not readable. + /// If this stream has been disposed. + public override int Read(byte[] buffer, int offset, int count) + { + if (!CanRead) throw new NotSupportedException(); + if (buffer == null) throw new ArgumentNullException(); + if (offset < 0 || count < 0) throw new ArgumentOutOfRangeException(); + if ((offset+count) > buffer.Length) throw new ArgumentException(); + if (_isDisposed) throw new ObjectDisposedException("GZipStream"); + + GCHandle h = GCHandle.Alloc(buffer, GCHandleType.Pinned); + int result; + try + { + result = gzread(_gzFile, h.AddrOfPinnedObject().ToInt32() + offset, count); + if (result < 0) + throw new IOException(); + } + finally + { + h.Free(); + } + return result; + } + + /// + /// Attempts to read a single byte from the stream. + /// + /// The byte that was read, or -1 in case of error or End-Of-File + public override int ReadByte() + { + if (!CanRead) throw new NotSupportedException(); + if (_isDisposed) throw new ObjectDisposedException("GZipStream"); + return gzgetc(_gzFile); + } + + /// + /// Writes a number of bytes to the stream + /// + /// + /// + /// + /// If buffer is null + /// If count or offset are negative + /// If offset + count is > buffer.Length + /// If this stream is not writeable. + /// If this stream has been disposed. + public override void Write(byte[] buffer, int offset, int count) + { + if (!CanWrite) throw new NotSupportedException(); + if (buffer == null) throw new ArgumentNullException(); + if (offset < 0 || count < 0) throw new ArgumentOutOfRangeException(); + if ((offset+count) > buffer.Length) throw new ArgumentException(); + if (_isDisposed) throw new ObjectDisposedException("GZipStream"); + + GCHandle h = GCHandle.Alloc(buffer, GCHandleType.Pinned); + try + { + int result = gzwrite(_gzFile, h.AddrOfPinnedObject().ToInt32() + offset, count); + if (result < 0) + throw new IOException(); + } + finally + { + h.Free(); + } + } + + /// + /// Writes a single byte to the stream + /// + /// The byte to add to the stream. + /// If this stream is not writeable. + /// If this stream has been disposed. + public override void WriteByte(byte value) + { + if (!CanWrite) throw new NotSupportedException(); + if (_isDisposed) throw new ObjectDisposedException("GZipStream"); + + int result = gzputc(_gzFile, (int)value); + if (result < 0) + throw new IOException(); + } + #endregion + + #region Position & length stuff + /// + /// Not supported. + /// + /// + /// Always thrown + public override void SetLength(long value) + { + throw new NotSupportedException(); + } + + /// + /// Not suppported. + /// + /// + /// + /// + /// Always thrown + public override long Seek(long offset, SeekOrigin origin) + { + throw new NotSupportedException(); + } + + /// + /// Flushes the GZipStream. + /// + /// In this implementation, this method does nothing. This is because excessive + /// flushing may degrade the achievable compression rates. + public override void Flush() + { + // left empty on purpose + } + + /// + /// Gets/sets the current position in the GZipStream. Not suppported. + /// + /// In this implementation this property is not supported + /// Always thrown + public override long Position + { + get + { + throw new NotSupportedException(); + } + set + { + throw new NotSupportedException(); + } + } + + /// + /// Gets the size of the stream. Not suppported. + /// + /// In this implementation this property is not supported + /// Always thrown + public override long Length + { + get + { + throw new NotSupportedException(); + } + } + #endregion + } +} diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/dotzlib/DotZLib/Inflater.cs b/software/scsi2sd-util/zlib-1.2.8/contrib/dotzlib/DotZLib/Inflater.cs new file mode 100644 index 0000000..d295f26 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/dotzlib/DotZLib/Inflater.cs @@ -0,0 +1,105 @@ +// +// © Copyright Henrik Ravn 2004 +// +// Use, modification and distribution are subject to the Boost Software License, Version 1.0. +// (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt) +// + +using System; +using System.Diagnostics; +using System.Runtime.InteropServices; + +namespace DotZLib +{ + + /// + /// Implements a data decompressor, using the inflate algorithm in the ZLib dll + /// + public class Inflater : CodecBase + { + #region Dll imports + [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl, CharSet=CharSet.Ansi)] + private static extern int inflateInit_(ref ZStream sz, string vs, int size); + + [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)] + private static extern int inflate(ref ZStream sz, int flush); + + [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)] + private static extern int inflateReset(ref ZStream sz); + + [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)] + private static extern int inflateEnd(ref ZStream sz); + #endregion + + /// + /// Constructs an new instance of the Inflater + /// + public Inflater() : base() + { + int retval = inflateInit_(ref _ztream, Info.Version, Marshal.SizeOf(_ztream)); + if (retval != 0) + throw new ZLibException(retval, "Could not initialize inflater"); + + resetOutput(); + } + + + /// + /// Adds more data to the codec to be processed. + /// + /// Byte array containing the data to be added to the codec + /// The index of the first byte to add from data + /// The number of bytes to add + /// Adding data may, or may not, raise the DataAvailable event + public override void Add(byte[] data, int offset, int count) + { + if (data == null) throw new ArgumentNullException(); + if (offset < 0 || count < 0) throw new ArgumentOutOfRangeException(); + if ((offset+count) > data.Length) throw new ArgumentException(); + + int total = count; + int inputIndex = offset; + int err = 0; + + while (err >= 0 && inputIndex < total) + { + copyInput(data, inputIndex, Math.Min(total - inputIndex, kBufferSize)); + err = inflate(ref _ztream, (int)FlushTypes.None); + if (err == 0) + while (_ztream.avail_out == 0) + { + OnDataAvailable(); + err = inflate(ref _ztream, (int)FlushTypes.None); + } + + inputIndex += (int)_ztream.total_in; + } + setChecksum( _ztream.adler ); + } + + + /// + /// Finishes up any pending data that needs to be processed and handled. + /// + public override void Finish() + { + int err; + do + { + err = inflate(ref _ztream, (int)FlushTypes.Finish); + OnDataAvailable(); + } + while (err == 0); + setChecksum( _ztream.adler ); + inflateReset(ref _ztream); + resetOutput(); + } + + /// + /// Closes the internal zlib inflate stream + /// + protected override void CleanUp() { inflateEnd(ref _ztream); } + + + } +} diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/dotzlib/DotZLib/UnitTests.cs b/software/scsi2sd-util/zlib-1.2.8/contrib/dotzlib/DotZLib/UnitTests.cs new file mode 100644 index 0000000..1539461 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/dotzlib/DotZLib/UnitTests.cs @@ -0,0 +1,274 @@ +// +// © Copyright Henrik Ravn 2004 +// +// Use, modification and distribution are subject to the Boost Software License, Version 1.0. +// (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt) +// + +using System; +using System.Collections; +using System.IO; + +// uncomment the define below to include unit tests +//#define nunit +#if nunit +using NUnit.Framework; + +// Unit tests for the DotZLib class library +// ---------------------------------------- +// +// Use this with NUnit 2 from http://www.nunit.org +// + +namespace DotZLibTests +{ + using DotZLib; + + // helper methods + internal class Utils + { + public static bool byteArrEqual( byte[] lhs, byte[] rhs ) + { + if (lhs.Length != rhs.Length) + return false; + for (int i = lhs.Length-1; i >= 0; --i) + if (lhs[i] != rhs[i]) + return false; + return true; + } + + } + + + [TestFixture] + public class CircBufferTests + { + #region Circular buffer tests + [Test] + public void SinglePutGet() + { + CircularBuffer buf = new CircularBuffer(10); + Assert.AreEqual( 0, buf.Size ); + Assert.AreEqual( -1, buf.Get() ); + + Assert.IsTrue(buf.Put( 1 )); + Assert.AreEqual( 1, buf.Size ); + Assert.AreEqual( 1, buf.Get() ); + Assert.AreEqual( 0, buf.Size ); + Assert.AreEqual( -1, buf.Get() ); + } + + [Test] + public void BlockPutGet() + { + CircularBuffer buf = new CircularBuffer(10); + byte[] arr = {1,2,3,4,5,6,7,8,9,10}; + Assert.AreEqual( 10, buf.Put(arr,0,10) ); + Assert.AreEqual( 10, buf.Size ); + Assert.IsFalse( buf.Put(11) ); + Assert.AreEqual( 1, buf.Get() ); + Assert.IsTrue( buf.Put(11) ); + + byte[] arr2 = (byte[])arr.Clone(); + Assert.AreEqual( 9, buf.Get(arr2,1,9) ); + Assert.IsTrue( Utils.byteArrEqual(arr,arr2) ); + } + + #endregion + } + + [TestFixture] + public class ChecksumTests + { + #region CRC32 Tests + [Test] + public void CRC32_Null() + { + CRC32Checksum crc32 = new CRC32Checksum(); + Assert.AreEqual( 0, crc32.Value ); + + crc32 = new CRC32Checksum(1); + Assert.AreEqual( 1, crc32.Value ); + + crc32 = new CRC32Checksum(556); + Assert.AreEqual( 556, crc32.Value ); + } + + [Test] + public void CRC32_Data() + { + CRC32Checksum crc32 = new CRC32Checksum(); + byte[] data = { 1,2,3,4,5,6,7 }; + crc32.Update(data); + Assert.AreEqual( 0x70e46888, crc32.Value ); + + crc32 = new CRC32Checksum(); + crc32.Update("penguin"); + Assert.AreEqual( 0x0e5c1a120, crc32.Value ); + + crc32 = new CRC32Checksum(1); + crc32.Update("penguin"); + Assert.AreEqual(0x43b6aa94, crc32.Value); + + } + #endregion + + #region Adler tests + + [Test] + public void Adler_Null() + { + AdlerChecksum adler = new AdlerChecksum(); + Assert.AreEqual(0, adler.Value); + + adler = new AdlerChecksum(1); + Assert.AreEqual( 1, adler.Value ); + + adler = new AdlerChecksum(556); + Assert.AreEqual( 556, adler.Value ); + } + + [Test] + public void Adler_Data() + { + AdlerChecksum adler = new AdlerChecksum(1); + byte[] data = { 1,2,3,4,5,6,7 }; + adler.Update(data); + Assert.AreEqual( 0x5b001d, adler.Value ); + + adler = new AdlerChecksum(); + adler.Update("penguin"); + Assert.AreEqual(0x0bcf02f6, adler.Value ); + + adler = new AdlerChecksum(1); + adler.Update("penguin"); + Assert.AreEqual(0x0bd602f7, adler.Value); + + } + #endregion + } + + [TestFixture] + public class InfoTests + { + #region Info tests + [Test] + public void Info_Version() + { + Info info = new Info(); + Assert.AreEqual("1.2.8", Info.Version); + Assert.AreEqual(32, info.SizeOfUInt); + Assert.AreEqual(32, info.SizeOfULong); + Assert.AreEqual(32, info.SizeOfPointer); + Assert.AreEqual(32, info.SizeOfOffset); + } + #endregion + } + + [TestFixture] + public class DeflateInflateTests + { + #region Deflate tests + [Test] + public void Deflate_Init() + { + using (Deflater def = new Deflater(CompressLevel.Default)) + { + } + } + + private ArrayList compressedData = new ArrayList(); + private uint adler1; + + private ArrayList uncompressedData = new ArrayList(); + private uint adler2; + + public void CDataAvail(byte[] data, int startIndex, int count) + { + for (int i = 0; i < count; ++i) + compressedData.Add(data[i+startIndex]); + } + + [Test] + public void Deflate_Compress() + { + compressedData.Clear(); + + byte[] testData = new byte[35000]; + for (int i = 0; i < testData.Length; ++i) + testData[i] = 5; + + using (Deflater def = new Deflater((CompressLevel)5)) + { + def.DataAvailable += new DataAvailableHandler(CDataAvail); + def.Add(testData); + def.Finish(); + adler1 = def.Checksum; + } + } + #endregion + + #region Inflate tests + [Test] + public void Inflate_Init() + { + using (Inflater inf = new Inflater()) + { + } + } + + private void DDataAvail(byte[] data, int startIndex, int count) + { + for (int i = 0; i < count; ++i) + uncompressedData.Add(data[i+startIndex]); + } + + [Test] + public void Inflate_Expand() + { + uncompressedData.Clear(); + + using (Inflater inf = new Inflater()) + { + inf.DataAvailable += new DataAvailableHandler(DDataAvail); + inf.Add((byte[])compressedData.ToArray(typeof(byte))); + inf.Finish(); + adler2 = inf.Checksum; + } + Assert.AreEqual( adler1, adler2 ); + } + #endregion + } + + [TestFixture] + public class GZipStreamTests + { + #region GZipStream test + [Test] + public void GZipStream_WriteRead() + { + using (GZipStream gzOut = new GZipStream("gzstream.gz", CompressLevel.Best)) + { + BinaryWriter writer = new BinaryWriter(gzOut); + writer.Write("hi there"); + writer.Write(Math.PI); + writer.Write(42); + } + + using (GZipStream gzIn = new GZipStream("gzstream.gz")) + { + BinaryReader reader = new BinaryReader(gzIn); + string s = reader.ReadString(); + Assert.AreEqual("hi there",s); + double d = reader.ReadDouble(); + Assert.AreEqual(Math.PI, d); + int i = reader.ReadInt32(); + Assert.AreEqual(42,i); + } + + } + #endregion + } +} + +#endif diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/dotzlib/LICENSE_1_0.txt b/software/scsi2sd-util/zlib-1.2.8/contrib/dotzlib/LICENSE_1_0.txt new file mode 100644 index 0000000..127a5bc --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/dotzlib/LICENSE_1_0.txt @@ -0,0 +1,23 @@ +Boost Software License - Version 1.0 - August 17th, 2003 + +Permission is hereby granted, free of charge, to any person or organization +obtaining a copy of the software and accompanying documentation covered by +this license (the "Software") to use, reproduce, display, distribute, +execute, and transmit the Software, and to prepare derivative works of the +Software, and to permit third-parties to whom the Software is furnished to +do so, all subject to the following: + +The copyright notices in the Software and this entire statement, including +the above license grant, this restriction and the following disclaimer, +must be included in all copies of the Software, in whole or in part, and +all derivative works of the Software, unless such copies or derivative +works are solely in the form of machine-executable object code generated by +a source language processor. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE, TITLE AND NON-INFRINGEMENT. IN NO EVENT +SHALL THE COPYRIGHT HOLDERS OR ANYONE DISTRIBUTING THE SOFTWARE BE LIABLE +FOR ANY DAMAGES OR OTHER LIABILITY, WHETHER IN CONTRACT, TORT OR OTHERWISE, +ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER +DEALINGS IN THE SOFTWARE. \ No newline at end of file diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/dotzlib/readme.txt b/software/scsi2sd-util/zlib-1.2.8/contrib/dotzlib/readme.txt new file mode 100644 index 0000000..4d8c2dd --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/dotzlib/readme.txt @@ -0,0 +1,58 @@ +This directory contains a .Net wrapper class library for the ZLib1.dll + +The wrapper includes support for inflating/deflating memory buffers, +.Net streaming wrappers for the gz streams part of zlib, and wrappers +for the checksum parts of zlib. See DotZLib/UnitTests.cs for examples. + +Directory structure: +-------------------- + +LICENSE_1_0.txt - License file. +readme.txt - This file. +DotZLib.chm - Class library documentation +DotZLib.build - NAnt build file +DotZLib.sln - Microsoft Visual Studio 2003 solution file + +DotZLib\*.cs - Source files for the class library + +Unit tests: +----------- +The file DotZLib/UnitTests.cs contains unit tests for use with NUnit 2.1 or higher. +To include unit tests in the build, define nunit before building. + + +Build instructions: +------------------- + +1. Using Visual Studio.Net 2003: + Open DotZLib.sln in VS.Net and build from there. Output file (DotZLib.dll) + will be found ./DotZLib/bin/release or ./DotZLib/bin/debug, depending on + you are building the release or debug version of the library. Check + DotZLib/UnitTests.cs for instructions on how to include unit tests in the + build. + +2. Using NAnt: + Open a command prompt with access to the build environment and run nant + in the same directory as the DotZLib.build file. + You can define 2 properties on the nant command-line to control the build: + debug={true|false} to toggle between release/debug builds (default=true). + nunit={true|false} to include or esclude unit tests (default=true). + Also the target clean will remove binaries. + Output file (DotZLib.dll) will be found in either ./DotZLib/bin/release + or ./DotZLib/bin/debug, depending on whether you are building the release + or debug version of the library. + + Examples: + nant -D:debug=false -D:nunit=false + will build a release mode version of the library without unit tests. + nant + will build a debug version of the library with unit tests + nant clean + will remove all previously built files. + + +--------------------------------- +Copyright (c) Henrik Ravn 2004 + +Use, modification and distribution are subject to the Boost Software License, Version 1.0. +(See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt) diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/gcc_gvmat64/gvmat64.S b/software/scsi2sd-util/zlib-1.2.8/contrib/gcc_gvmat64/gvmat64.S new file mode 100644 index 0000000..23309fa --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/gcc_gvmat64/gvmat64.S @@ -0,0 +1,574 @@ +/* +;uInt longest_match_x64( +; deflate_state *s, +; IPos cur_match); // current match + +; gvmat64.S -- Asm portion of the optimized longest_match for 32 bits x86_64 +; (AMD64 on Athlon 64, Opteron, Phenom +; and Intel EM64T on Pentium 4 with EM64T, Pentium D, Core 2 Duo, Core I5/I7) +; this file is translation from gvmat64.asm to GCC 4.x (for Linux, Mac XCode) +; Copyright (C) 1995-2010 Jean-loup Gailly, Brian Raiter and Gilles Vollant. +; +; File written by Gilles Vollant, by converting to assembly the longest_match +; from Jean-loup Gailly in deflate.c of zLib and infoZip zip. +; and by taking inspiration on asm686 with masm, optimised assembly code +; from Brian Raiter, written 1998 +; +; This software is provided 'as-is', without any express or implied +; warranty. In no event will the authors be held liable for any damages +; arising from the use of this software. +; +; Permission is granted to anyone to use this software for any purpose, +; including commercial applications, and to alter it and redistribute it +; freely, subject to the following restrictions: +; +; 1. The origin of this software must not be misrepresented; you must not +; claim that you wrote the original software. If you use this software +; in a product, an acknowledgment in the product documentation would be +; appreciated but is not required. +; 2. Altered source versions must be plainly marked as such, and must not be +; misrepresented as being the original software +; 3. This notice may not be removed or altered from any source distribution. +; +; http://www.zlib.net +; http://www.winimage.com/zLibDll +; http://www.muppetlabs.com/~breadbox/software/assembly.html +; +; to compile this file for zLib, I use option: +; gcc -c -arch x86_64 gvmat64.S + + +;uInt longest_match(s, cur_match) +; deflate_state *s; +; IPos cur_match; // current match / +; +; with XCode for Mac, I had strange error with some jump on intel syntax +; this is why BEFORE_JMP and AFTER_JMP are used + */ + + +#define BEFORE_JMP .att_syntax +#define AFTER_JMP .intel_syntax noprefix + +#ifndef NO_UNDERLINE +# define match_init _match_init +# define longest_match _longest_match +#endif + +.intel_syntax noprefix + +.globl match_init, longest_match +.text +longest_match: + + + +#define LocalVarsSize 96 +/* +; register used : rax,rbx,rcx,rdx,rsi,rdi,r8,r9,r10,r11,r12 +; free register : r14,r15 +; register can be saved : rsp +*/ + +#define chainlenwmask (rsp + 8 - LocalVarsSize) +#define nicematch (rsp + 16 - LocalVarsSize) + +#define save_rdi (rsp + 24 - LocalVarsSize) +#define save_rsi (rsp + 32 - LocalVarsSize) +#define save_rbx (rsp + 40 - LocalVarsSize) +#define save_rbp (rsp + 48 - LocalVarsSize) +#define save_r12 (rsp + 56 - LocalVarsSize) +#define save_r13 (rsp + 64 - LocalVarsSize) +#define save_r14 (rsp + 72 - LocalVarsSize) +#define save_r15 (rsp + 80 - LocalVarsSize) + + +/* +; all the +4 offsets are due to the addition of pending_buf_size (in zlib +; in the deflate_state structure since the asm code was first written +; (if you compile with zlib 1.0.4 or older, remove the +4). +; Note : these value are good with a 8 bytes boundary pack structure +*/ + +#define MAX_MATCH 258 +#define MIN_MATCH 3 +#define MIN_LOOKAHEAD (MAX_MATCH+MIN_MATCH+1) + +/* +;;; Offsets for fields in the deflate_state structure. These numbers +;;; are calculated from the definition of deflate_state, with the +;;; assumption that the compiler will dword-align the fields. (Thus, +;;; changing the definition of deflate_state could easily cause this +;;; program to crash horribly, without so much as a warning at +;;; compile time. Sigh.) + +; all the +zlib1222add offsets are due to the addition of fields +; in zlib in the deflate_state structure since the asm code was first written +; (if you compile with zlib 1.0.4 or older, use "zlib1222add equ (-4)"). +; (if you compile with zlib between 1.0.5 and 1.2.2.1, use "zlib1222add equ 0"). +; if you compile with zlib 1.2.2.2 or later , use "zlib1222add equ 8"). +*/ + + + +/* you can check the structure offset by running + +#include +#include +#include "deflate.h" + +void print_depl() +{ +deflate_state ds; +deflate_state *s=&ds; +printf("size pointer=%u\n",(int)sizeof(void*)); + +printf("#define dsWSize %u\n",(int)(((char*)&(s->w_size))-((char*)s))); +printf("#define dsWMask %u\n",(int)(((char*)&(s->w_mask))-((char*)s))); +printf("#define dsWindow %u\n",(int)(((char*)&(s->window))-((char*)s))); +printf("#define dsPrev %u\n",(int)(((char*)&(s->prev))-((char*)s))); +printf("#define dsMatchLen %u\n",(int)(((char*)&(s->match_length))-((char*)s))); +printf("#define dsPrevMatch %u\n",(int)(((char*)&(s->prev_match))-((char*)s))); +printf("#define dsStrStart %u\n",(int)(((char*)&(s->strstart))-((char*)s))); +printf("#define dsMatchStart %u\n",(int)(((char*)&(s->match_start))-((char*)s))); +printf("#define dsLookahead %u\n",(int)(((char*)&(s->lookahead))-((char*)s))); +printf("#define dsPrevLen %u\n",(int)(((char*)&(s->prev_length))-((char*)s))); +printf("#define dsMaxChainLen %u\n",(int)(((char*)&(s->max_chain_length))-((char*)s))); +printf("#define dsGoodMatch %u\n",(int)(((char*)&(s->good_match))-((char*)s))); +printf("#define dsNiceMatch %u\n",(int)(((char*)&(s->nice_match))-((char*)s))); +} +*/ + +#define dsWSize 68 +#define dsWMask 76 +#define dsWindow 80 +#define dsPrev 96 +#define dsMatchLen 144 +#define dsPrevMatch 148 +#define dsStrStart 156 +#define dsMatchStart 160 +#define dsLookahead 164 +#define dsPrevLen 168 +#define dsMaxChainLen 172 +#define dsGoodMatch 188 +#define dsNiceMatch 192 + +#define window_size [ rcx + dsWSize] +#define WMask [ rcx + dsWMask] +#define window_ad [ rcx + dsWindow] +#define prev_ad [ rcx + dsPrev] +#define strstart [ rcx + dsStrStart] +#define match_start [ rcx + dsMatchStart] +#define Lookahead [ rcx + dsLookahead] //; 0ffffffffh on infozip +#define prev_length [ rcx + dsPrevLen] +#define max_chain_length [ rcx + dsMaxChainLen] +#define good_match [ rcx + dsGoodMatch] +#define nice_match [ rcx + dsNiceMatch] + +/* +; windows: +; parameter 1 in rcx(deflate state s), param 2 in rdx (cur match) + +; see http://weblogs.asp.net/oldnewthing/archive/2004/01/14/58579.aspx and +; http://msdn.microsoft.com/library/en-us/kmarch/hh/kmarch/64bitAMD_8e951dd2-ee77-4728-8702-55ce4b5dd24a.xml.asp +; +; All registers must be preserved across the call, except for +; rax, rcx, rdx, r8, r9, r10, and r11, which are scratch. + +; +; gcc on macosx-linux: +; see http://www.x86-64.org/documentation/abi-0.99.pdf +; param 1 in rdi, param 2 in rsi +; rbx, rsp, rbp, r12 to r15 must be preserved + +;;; Save registers that the compiler may be using, and adjust esp to +;;; make room for our stack frame. + + +;;; Retrieve the function arguments. r8d will hold cur_match +;;; throughout the entire function. edx will hold the pointer to the +;;; deflate_state structure during the function's setup (before +;;; entering the main loop. + +; ms: parameter 1 in rcx (deflate_state* s), param 2 in edx -> r8 (cur match) +; mac: param 1 in rdi, param 2 rsi +; this clear high 32 bits of r8, which can be garbage in both r8 and rdx +*/ + mov [save_rbx],rbx + mov [save_rbp],rbp + + + mov rcx,rdi + + mov r8d,esi + + + mov [save_r12],r12 + mov [save_r13],r13 + mov [save_r14],r14 + mov [save_r15],r15 + + +//;;; uInt wmask = s->w_mask; +//;;; unsigned chain_length = s->max_chain_length; +//;;; if (s->prev_length >= s->good_match) { +//;;; chain_length >>= 2; +//;;; } + + + mov edi, prev_length + mov esi, good_match + mov eax, WMask + mov ebx, max_chain_length + cmp edi, esi + jl LastMatchGood + shr ebx, 2 +LastMatchGood: + +//;;; chainlen is decremented once beforehand so that the function can +//;;; use the sign flag instead of the zero flag for the exit test. +//;;; It is then shifted into the high word, to make room for the wmask +//;;; value, which it will always accompany. + + dec ebx + shl ebx, 16 + or ebx, eax + +//;;; on zlib only +//;;; if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead; + + + + mov eax, nice_match + mov [chainlenwmask], ebx + mov r10d, Lookahead + cmp r10d, eax + cmovnl r10d, eax + mov [nicematch],r10d + + + +//;;; register Bytef *scan = s->window + s->strstart; + mov r10, window_ad + mov ebp, strstart + lea r13, [r10 + rbp] + +//;;; Determine how many bytes the scan ptr is off from being +//;;; dword-aligned. + + mov r9,r13 + neg r13 + and r13,3 + +//;;; IPos limit = s->strstart > (IPos)MAX_DIST(s) ? +//;;; s->strstart - (IPos)MAX_DIST(s) : NIL; + + + mov eax, window_size + sub eax, MIN_LOOKAHEAD + + + xor edi,edi + sub ebp, eax + + mov r11d, prev_length + + cmovng ebp,edi + +//;;; int best_len = s->prev_length; + + +//;;; Store the sum of s->window + best_len in esi locally, and in esi. + + lea rsi,[r10+r11] + +//;;; register ush scan_start = *(ushf*)scan; +//;;; register ush scan_end = *(ushf*)(scan+best_len-1); +//;;; Posf *prev = s->prev; + + movzx r12d,word ptr [r9] + movzx ebx, word ptr [r9 + r11 - 1] + + mov rdi, prev_ad + +//;;; Jump into the main loop. + + mov edx, [chainlenwmask] + + cmp bx,word ptr [rsi + r8 - 1] + jz LookupLoopIsZero + + + +LookupLoop1: + and r8d, edx + + movzx r8d, word ptr [rdi + r8*2] + cmp r8d, ebp + jbe LeaveNow + + + + sub edx, 0x00010000 + BEFORE_JMP + js LeaveNow + AFTER_JMP + +LoopEntry1: + cmp bx,word ptr [rsi + r8 - 1] + BEFORE_JMP + jz LookupLoopIsZero + AFTER_JMP + +LookupLoop2: + and r8d, edx + + movzx r8d, word ptr [rdi + r8*2] + cmp r8d, ebp + BEFORE_JMP + jbe LeaveNow + AFTER_JMP + sub edx, 0x00010000 + BEFORE_JMP + js LeaveNow + AFTER_JMP + +LoopEntry2: + cmp bx,word ptr [rsi + r8 - 1] + BEFORE_JMP + jz LookupLoopIsZero + AFTER_JMP + +LookupLoop4: + and r8d, edx + + movzx r8d, word ptr [rdi + r8*2] + cmp r8d, ebp + BEFORE_JMP + jbe LeaveNow + AFTER_JMP + sub edx, 0x00010000 + BEFORE_JMP + js LeaveNow + AFTER_JMP + +LoopEntry4: + + cmp bx,word ptr [rsi + r8 - 1] + BEFORE_JMP + jnz LookupLoop1 + jmp LookupLoopIsZero + AFTER_JMP +/* +;;; do { +;;; match = s->window + cur_match; +;;; if (*(ushf*)(match+best_len-1) != scan_end || +;;; *(ushf*)match != scan_start) continue; +;;; [...] +;;; } while ((cur_match = prev[cur_match & wmask]) > limit +;;; && --chain_length != 0); +;;; +;;; Here is the inner loop of the function. The function will spend the +;;; majority of its time in this loop, and majority of that time will +;;; be spent in the first ten instructions. +;;; +;;; Within this loop: +;;; ebx = scanend +;;; r8d = curmatch +;;; edx = chainlenwmask - i.e., ((chainlen << 16) | wmask) +;;; esi = windowbestlen - i.e., (window + bestlen) +;;; edi = prev +;;; ebp = limit +*/ +.balign 16 +LookupLoop: + and r8d, edx + + movzx r8d, word ptr [rdi + r8*2] + cmp r8d, ebp + BEFORE_JMP + jbe LeaveNow + AFTER_JMP + sub edx, 0x00010000 + BEFORE_JMP + js LeaveNow + AFTER_JMP + +LoopEntry: + + cmp bx,word ptr [rsi + r8 - 1] + BEFORE_JMP + jnz LookupLoop1 + AFTER_JMP +LookupLoopIsZero: + cmp r12w, word ptr [r10 + r8] + BEFORE_JMP + jnz LookupLoop1 + AFTER_JMP + + +//;;; Store the current value of chainlen. + mov [chainlenwmask], edx +/* +;;; Point edi to the string under scrutiny, and esi to the string we +;;; are hoping to match it up with. In actuality, esi and edi are +;;; both pointed (MAX_MATCH_8 - scanalign) bytes ahead, and edx is +;;; initialized to -(MAX_MATCH_8 - scanalign). +*/ + lea rsi,[r8+r10] + mov rdx, 0xfffffffffffffef8 //; -(MAX_MATCH_8) + lea rsi, [rsi + r13 + 0x0108] //;MAX_MATCH_8] + lea rdi, [r9 + r13 + 0x0108] //;MAX_MATCH_8] + + prefetcht1 [rsi+rdx] + prefetcht1 [rdi+rdx] + +/* +;;; Test the strings for equality, 8 bytes at a time. At the end, +;;; adjust rdx so that it is offset to the exact byte that mismatched. +;;; +;;; We already know at this point that the first three bytes of the +;;; strings match each other, and they can be safely passed over before +;;; starting the compare loop. So what this code does is skip over 0-3 +;;; bytes, as much as necessary in order to dword-align the edi +;;; pointer. (rsi will still be misaligned three times out of four.) +;;; +;;; It should be confessed that this loop usually does not represent +;;; much of the total running time. Replacing it with a more +;;; straightforward "rep cmpsb" would not drastically degrade +;;; performance. +*/ + +LoopCmps: + mov rax, [rsi + rdx] + xor rax, [rdi + rdx] + jnz LeaveLoopCmps + + mov rax, [rsi + rdx + 8] + xor rax, [rdi + rdx + 8] + jnz LeaveLoopCmps8 + + + mov rax, [rsi + rdx + 8+8] + xor rax, [rdi + rdx + 8+8] + jnz LeaveLoopCmps16 + + add rdx,8+8+8 + + BEFORE_JMP + jnz LoopCmps + jmp LenMaximum + AFTER_JMP + +LeaveLoopCmps16: add rdx,8 +LeaveLoopCmps8: add rdx,8 +LeaveLoopCmps: + + test eax, 0x0000FFFF + jnz LenLower + + test eax,0xffffffff + + jnz LenLower32 + + add rdx,4 + shr rax,32 + or ax,ax + BEFORE_JMP + jnz LenLower + AFTER_JMP + +LenLower32: + shr eax,16 + add rdx,2 + +LenLower: + sub al, 1 + adc rdx, 0 +//;;; Calculate the length of the match. If it is longer than MAX_MATCH, +//;;; then automatically accept it as the best possible match and leave. + + lea rax, [rdi + rdx] + sub rax, r9 + cmp eax, MAX_MATCH + BEFORE_JMP + jge LenMaximum + AFTER_JMP +/* +;;; If the length of the match is not longer than the best match we +;;; have so far, then forget it and return to the lookup loop. +;/////////////////////////////////// +*/ + cmp eax, r11d + jg LongerMatch + + lea rsi,[r10+r11] + + mov rdi, prev_ad + mov edx, [chainlenwmask] + BEFORE_JMP + jmp LookupLoop + AFTER_JMP +/* +;;; s->match_start = cur_match; +;;; best_len = len; +;;; if (len >= nice_match) break; +;;; scan_end = *(ushf*)(scan+best_len-1); +*/ +LongerMatch: + mov r11d, eax + mov match_start, r8d + cmp eax, [nicematch] + BEFORE_JMP + jge LeaveNow + AFTER_JMP + + lea rsi,[r10+rax] + + movzx ebx, word ptr [r9 + rax - 1] + mov rdi, prev_ad + mov edx, [chainlenwmask] + BEFORE_JMP + jmp LookupLoop + AFTER_JMP + +//;;; Accept the current string, with the maximum possible length. + +LenMaximum: + mov r11d,MAX_MATCH + mov match_start, r8d + +//;;; if ((uInt)best_len <= s->lookahead) return (uInt)best_len; +//;;; return s->lookahead; + +LeaveNow: + mov eax, Lookahead + cmp r11d, eax + cmovng eax, r11d + + + +//;;; Restore the stack and return from whence we came. + + +// mov rsi,[save_rsi] +// mov rdi,[save_rdi] + mov rbx,[save_rbx] + mov rbp,[save_rbp] + mov r12,[save_r12] + mov r13,[save_r13] + mov r14,[save_r14] + mov r15,[save_r15] + + + ret 0 +//; please don't remove this string ! +//; Your can freely use gvmat64 in any free or commercial app +//; but it is far better don't remove the string in the binary! + // db 0dh,0ah,"asm686 with masm, optimised assembly code from Brian Raiter, written 1998, converted to amd 64 by Gilles Vollant 2005",0dh,0ah,0 + + +match_init: + ret 0 + + diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/infback9/README b/software/scsi2sd-util/zlib-1.2.8/contrib/infback9/README new file mode 100644 index 0000000..e75ed13 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/infback9/README @@ -0,0 +1 @@ +See infback9.h for what this is and how to use it. diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/infback9/infback9.c b/software/scsi2sd-util/zlib-1.2.8/contrib/infback9/infback9.c new file mode 100644 index 0000000..05fb3e3 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/infback9/infback9.c @@ -0,0 +1,615 @@ +/* infback9.c -- inflate deflate64 data using a call-back interface + * Copyright (C) 1995-2008 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +#include "zutil.h" +#include "infback9.h" +#include "inftree9.h" +#include "inflate9.h" + +#define WSIZE 65536UL + +/* + strm provides memory allocation functions in zalloc and zfree, or + Z_NULL to use the library memory allocation functions. + + window is a user-supplied window and output buffer that is 64K bytes. + */ +int ZEXPORT inflateBack9Init_(strm, window, version, stream_size) +z_stream FAR *strm; +unsigned char FAR *window; +const char *version; +int stream_size; +{ + struct inflate_state FAR *state; + + if (version == Z_NULL || version[0] != ZLIB_VERSION[0] || + stream_size != (int)(sizeof(z_stream))) + return Z_VERSION_ERROR; + if (strm == Z_NULL || window == Z_NULL) + return Z_STREAM_ERROR; + strm->msg = Z_NULL; /* in case we return an error */ + if (strm->zalloc == (alloc_func)0) { + strm->zalloc = zcalloc; + strm->opaque = (voidpf)0; + } + if (strm->zfree == (free_func)0) strm->zfree = zcfree; + state = (struct inflate_state FAR *)ZALLOC(strm, 1, + sizeof(struct inflate_state)); + if (state == Z_NULL) return Z_MEM_ERROR; + Tracev((stderr, "inflate: allocated\n")); + strm->state = (voidpf)state; + state->window = window; + return Z_OK; +} + +/* + Build and output length and distance decoding tables for fixed code + decoding. + */ +#ifdef MAKEFIXED +#include + +void makefixed9(void) +{ + unsigned sym, bits, low, size; + code *next, *lenfix, *distfix; + struct inflate_state state; + code fixed[544]; + + /* literal/length table */ + sym = 0; + while (sym < 144) state.lens[sym++] = 8; + while (sym < 256) state.lens[sym++] = 9; + while (sym < 280) state.lens[sym++] = 7; + while (sym < 288) state.lens[sym++] = 8; + next = fixed; + lenfix = next; + bits = 9; + inflate_table9(LENS, state.lens, 288, &(next), &(bits), state.work); + + /* distance table */ + sym = 0; + while (sym < 32) state.lens[sym++] = 5; + distfix = next; + bits = 5; + inflate_table9(DISTS, state.lens, 32, &(next), &(bits), state.work); + + /* write tables */ + puts(" /* inffix9.h -- table for decoding deflate64 fixed codes"); + puts(" * Generated automatically by makefixed9()."); + puts(" */"); + puts(""); + puts(" /* WARNING: this file should *not* be used by applications."); + puts(" It is part of the implementation of this library and is"); + puts(" subject to change. Applications should only use zlib.h."); + puts(" */"); + puts(""); + size = 1U << 9; + printf(" static const code lenfix[%u] = {", size); + low = 0; + for (;;) { + if ((low % 6) == 0) printf("\n "); + printf("{%u,%u,%d}", lenfix[low].op, lenfix[low].bits, + lenfix[low].val); + if (++low == size) break; + putchar(','); + } + puts("\n };"); + size = 1U << 5; + printf("\n static const code distfix[%u] = {", size); + low = 0; + for (;;) { + if ((low % 5) == 0) printf("\n "); + printf("{%u,%u,%d}", distfix[low].op, distfix[low].bits, + distfix[low].val); + if (++low == size) break; + putchar(','); + } + puts("\n };"); +} +#endif /* MAKEFIXED */ + +/* Macros for inflateBack(): */ + +/* Clear the input bit accumulator */ +#define INITBITS() \ + do { \ + hold = 0; \ + bits = 0; \ + } while (0) + +/* Assure that some input is available. If input is requested, but denied, + then return a Z_BUF_ERROR from inflateBack(). */ +#define PULL() \ + do { \ + if (have == 0) { \ + have = in(in_desc, &next); \ + if (have == 0) { \ + next = Z_NULL; \ + ret = Z_BUF_ERROR; \ + goto inf_leave; \ + } \ + } \ + } while (0) + +/* Get a byte of input into the bit accumulator, or return from inflateBack() + with an error if there is no input available. */ +#define PULLBYTE() \ + do { \ + PULL(); \ + have--; \ + hold += (unsigned long)(*next++) << bits; \ + bits += 8; \ + } while (0) + +/* Assure that there are at least n bits in the bit accumulator. If there is + not enough available input to do that, then return from inflateBack() with + an error. */ +#define NEEDBITS(n) \ + do { \ + while (bits < (unsigned)(n)) \ + PULLBYTE(); \ + } while (0) + +/* Return the low n bits of the bit accumulator (n <= 16) */ +#define BITS(n) \ + ((unsigned)hold & ((1U << (n)) - 1)) + +/* Remove n bits from the bit accumulator */ +#define DROPBITS(n) \ + do { \ + hold >>= (n); \ + bits -= (unsigned)(n); \ + } while (0) + +/* Remove zero to seven bits as needed to go to a byte boundary */ +#define BYTEBITS() \ + do { \ + hold >>= bits & 7; \ + bits -= bits & 7; \ + } while (0) + +/* Assure that some output space is available, by writing out the window + if it's full. If the write fails, return from inflateBack() with a + Z_BUF_ERROR. */ +#define ROOM() \ + do { \ + if (left == 0) { \ + put = window; \ + left = WSIZE; \ + wrap = 1; \ + if (out(out_desc, put, (unsigned)left)) { \ + ret = Z_BUF_ERROR; \ + goto inf_leave; \ + } \ + } \ + } while (0) + +/* + strm provides the memory allocation functions and window buffer on input, + and provides information on the unused input on return. For Z_DATA_ERROR + returns, strm will also provide an error message. + + in() and out() are the call-back input and output functions. When + inflateBack() needs more input, it calls in(). When inflateBack() has + filled the window with output, or when it completes with data in the + window, it calls out() to write out the data. The application must not + change the provided input until in() is called again or inflateBack() + returns. The application must not change the window/output buffer until + inflateBack() returns. + + in() and out() are called with a descriptor parameter provided in the + inflateBack() call. This parameter can be a structure that provides the + information required to do the read or write, as well as accumulated + information on the input and output such as totals and check values. + + in() should return zero on failure. out() should return non-zero on + failure. If either in() or out() fails, than inflateBack() returns a + Z_BUF_ERROR. strm->next_in can be checked for Z_NULL to see whether it + was in() or out() that caused in the error. Otherwise, inflateBack() + returns Z_STREAM_END on success, Z_DATA_ERROR for an deflate format + error, or Z_MEM_ERROR if it could not allocate memory for the state. + inflateBack() can also return Z_STREAM_ERROR if the input parameters + are not correct, i.e. strm is Z_NULL or the state was not initialized. + */ +int ZEXPORT inflateBack9(strm, in, in_desc, out, out_desc) +z_stream FAR *strm; +in_func in; +void FAR *in_desc; +out_func out; +void FAR *out_desc; +{ + struct inflate_state FAR *state; + z_const unsigned char FAR *next; /* next input */ + unsigned char FAR *put; /* next output */ + unsigned have; /* available input */ + unsigned long left; /* available output */ + inflate_mode mode; /* current inflate mode */ + int lastblock; /* true if processing last block */ + int wrap; /* true if the window has wrapped */ + unsigned char FAR *window; /* allocated sliding window, if needed */ + unsigned long hold; /* bit buffer */ + unsigned bits; /* bits in bit buffer */ + unsigned extra; /* extra bits needed */ + unsigned long length; /* literal or length of data to copy */ + unsigned long offset; /* distance back to copy string from */ + unsigned long copy; /* number of stored or match bytes to copy */ + unsigned char FAR *from; /* where to copy match bytes from */ + code const FAR *lencode; /* starting table for length/literal codes */ + code const FAR *distcode; /* starting table for distance codes */ + unsigned lenbits; /* index bits for lencode */ + unsigned distbits; /* index bits for distcode */ + code here; /* current decoding table entry */ + code last; /* parent table entry */ + unsigned len; /* length to copy for repeats, bits to drop */ + int ret; /* return code */ + static const unsigned short order[19] = /* permutation of code lengths */ + {16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15}; +#include "inffix9.h" + + /* Check that the strm exists and that the state was initialized */ + if (strm == Z_NULL || strm->state == Z_NULL) + return Z_STREAM_ERROR; + state = (struct inflate_state FAR *)strm->state; + + /* Reset the state */ + strm->msg = Z_NULL; + mode = TYPE; + lastblock = 0; + wrap = 0; + window = state->window; + next = strm->next_in; + have = next != Z_NULL ? strm->avail_in : 0; + hold = 0; + bits = 0; + put = window; + left = WSIZE; + lencode = Z_NULL; + distcode = Z_NULL; + + /* Inflate until end of block marked as last */ + for (;;) + switch (mode) { + case TYPE: + /* determine and dispatch block type */ + if (lastblock) { + BYTEBITS(); + mode = DONE; + break; + } + NEEDBITS(3); + lastblock = BITS(1); + DROPBITS(1); + switch (BITS(2)) { + case 0: /* stored block */ + Tracev((stderr, "inflate: stored block%s\n", + lastblock ? " (last)" : "")); + mode = STORED; + break; + case 1: /* fixed block */ + lencode = lenfix; + lenbits = 9; + distcode = distfix; + distbits = 5; + Tracev((stderr, "inflate: fixed codes block%s\n", + lastblock ? " (last)" : "")); + mode = LEN; /* decode codes */ + break; + case 2: /* dynamic block */ + Tracev((stderr, "inflate: dynamic codes block%s\n", + lastblock ? " (last)" : "")); + mode = TABLE; + break; + case 3: + strm->msg = (char *)"invalid block type"; + mode = BAD; + } + DROPBITS(2); + break; + + case STORED: + /* get and verify stored block length */ + BYTEBITS(); /* go to byte boundary */ + NEEDBITS(32); + if ((hold & 0xffff) != ((hold >> 16) ^ 0xffff)) { + strm->msg = (char *)"invalid stored block lengths"; + mode = BAD; + break; + } + length = (unsigned)hold & 0xffff; + Tracev((stderr, "inflate: stored length %lu\n", + length)); + INITBITS(); + + /* copy stored block from input to output */ + while (length != 0) { + copy = length; + PULL(); + ROOM(); + if (copy > have) copy = have; + if (copy > left) copy = left; + zmemcpy(put, next, copy); + have -= copy; + next += copy; + left -= copy; + put += copy; + length -= copy; + } + Tracev((stderr, "inflate: stored end\n")); + mode = TYPE; + break; + + case TABLE: + /* get dynamic table entries descriptor */ + NEEDBITS(14); + state->nlen = BITS(5) + 257; + DROPBITS(5); + state->ndist = BITS(5) + 1; + DROPBITS(5); + state->ncode = BITS(4) + 4; + DROPBITS(4); + if (state->nlen > 286) { + strm->msg = (char *)"too many length symbols"; + mode = BAD; + break; + } + Tracev((stderr, "inflate: table sizes ok\n")); + + /* get code length code lengths (not a typo) */ + state->have = 0; + while (state->have < state->ncode) { + NEEDBITS(3); + state->lens[order[state->have++]] = (unsigned short)BITS(3); + DROPBITS(3); + } + while (state->have < 19) + state->lens[order[state->have++]] = 0; + state->next = state->codes; + lencode = (code const FAR *)(state->next); + lenbits = 7; + ret = inflate_table9(CODES, state->lens, 19, &(state->next), + &(lenbits), state->work); + if (ret) { + strm->msg = (char *)"invalid code lengths set"; + mode = BAD; + break; + } + Tracev((stderr, "inflate: code lengths ok\n")); + + /* get length and distance code code lengths */ + state->have = 0; + while (state->have < state->nlen + state->ndist) { + for (;;) { + here = lencode[BITS(lenbits)]; + if ((unsigned)(here.bits) <= bits) break; + PULLBYTE(); + } + if (here.val < 16) { + NEEDBITS(here.bits); + DROPBITS(here.bits); + state->lens[state->have++] = here.val; + } + else { + if (here.val == 16) { + NEEDBITS(here.bits + 2); + DROPBITS(here.bits); + if (state->have == 0) { + strm->msg = (char *)"invalid bit length repeat"; + mode = BAD; + break; + } + len = (unsigned)(state->lens[state->have - 1]); + copy = 3 + BITS(2); + DROPBITS(2); + } + else if (here.val == 17) { + NEEDBITS(here.bits + 3); + DROPBITS(here.bits); + len = 0; + copy = 3 + BITS(3); + DROPBITS(3); + } + else { + NEEDBITS(here.bits + 7); + DROPBITS(here.bits); + len = 0; + copy = 11 + BITS(7); + DROPBITS(7); + } + if (state->have + copy > state->nlen + state->ndist) { + strm->msg = (char *)"invalid bit length repeat"; + mode = BAD; + break; + } + while (copy--) + state->lens[state->have++] = (unsigned short)len; + } + } + + /* handle error breaks in while */ + if (mode == BAD) break; + + /* check for end-of-block code (better have one) */ + if (state->lens[256] == 0) { + strm->msg = (char *)"invalid code -- missing end-of-block"; + mode = BAD; + break; + } + + /* build code tables -- note: do not change the lenbits or distbits + values here (9 and 6) without reading the comments in inftree9.h + concerning the ENOUGH constants, which depend on those values */ + state->next = state->codes; + lencode = (code const FAR *)(state->next); + lenbits = 9; + ret = inflate_table9(LENS, state->lens, state->nlen, + &(state->next), &(lenbits), state->work); + if (ret) { + strm->msg = (char *)"invalid literal/lengths set"; + mode = BAD; + break; + } + distcode = (code const FAR *)(state->next); + distbits = 6; + ret = inflate_table9(DISTS, state->lens + state->nlen, + state->ndist, &(state->next), &(distbits), + state->work); + if (ret) { + strm->msg = (char *)"invalid distances set"; + mode = BAD; + break; + } + Tracev((stderr, "inflate: codes ok\n")); + mode = LEN; + + case LEN: + /* get a literal, length, or end-of-block code */ + for (;;) { + here = lencode[BITS(lenbits)]; + if ((unsigned)(here.bits) <= bits) break; + PULLBYTE(); + } + if (here.op && (here.op & 0xf0) == 0) { + last = here; + for (;;) { + here = lencode[last.val + + (BITS(last.bits + last.op) >> last.bits)]; + if ((unsigned)(last.bits + here.bits) <= bits) break; + PULLBYTE(); + } + DROPBITS(last.bits); + } + DROPBITS(here.bits); + length = (unsigned)here.val; + + /* process literal */ + if (here.op == 0) { + Tracevv((stderr, here.val >= 0x20 && here.val < 0x7f ? + "inflate: literal '%c'\n" : + "inflate: literal 0x%02x\n", here.val)); + ROOM(); + *put++ = (unsigned char)(length); + left--; + mode = LEN; + break; + } + + /* process end of block */ + if (here.op & 32) { + Tracevv((stderr, "inflate: end of block\n")); + mode = TYPE; + break; + } + + /* invalid code */ + if (here.op & 64) { + strm->msg = (char *)"invalid literal/length code"; + mode = BAD; + break; + } + + /* length code -- get extra bits, if any */ + extra = (unsigned)(here.op) & 31; + if (extra != 0) { + NEEDBITS(extra); + length += BITS(extra); + DROPBITS(extra); + } + Tracevv((stderr, "inflate: length %lu\n", length)); + + /* get distance code */ + for (;;) { + here = distcode[BITS(distbits)]; + if ((unsigned)(here.bits) <= bits) break; + PULLBYTE(); + } + if ((here.op & 0xf0) == 0) { + last = here; + for (;;) { + here = distcode[last.val + + (BITS(last.bits + last.op) >> last.bits)]; + if ((unsigned)(last.bits + here.bits) <= bits) break; + PULLBYTE(); + } + DROPBITS(last.bits); + } + DROPBITS(here.bits); + if (here.op & 64) { + strm->msg = (char *)"invalid distance code"; + mode = BAD; + break; + } + offset = (unsigned)here.val; + + /* get distance extra bits, if any */ + extra = (unsigned)(here.op) & 15; + if (extra != 0) { + NEEDBITS(extra); + offset += BITS(extra); + DROPBITS(extra); + } + if (offset > WSIZE - (wrap ? 0: left)) { + strm->msg = (char *)"invalid distance too far back"; + mode = BAD; + break; + } + Tracevv((stderr, "inflate: distance %lu\n", offset)); + + /* copy match from window to output */ + do { + ROOM(); + copy = WSIZE - offset; + if (copy < left) { + from = put + copy; + copy = left - copy; + } + else { + from = put - offset; + copy = left; + } + if (copy > length) copy = length; + length -= copy; + left -= copy; + do { + *put++ = *from++; + } while (--copy); + } while (length != 0); + break; + + case DONE: + /* inflate stream terminated properly -- write leftover output */ + ret = Z_STREAM_END; + if (left < WSIZE) { + if (out(out_desc, window, (unsigned)(WSIZE - left))) + ret = Z_BUF_ERROR; + } + goto inf_leave; + + case BAD: + ret = Z_DATA_ERROR; + goto inf_leave; + + default: /* can't happen, but makes compilers happy */ + ret = Z_STREAM_ERROR; + goto inf_leave; + } + + /* Return unused input */ + inf_leave: + strm->next_in = next; + strm->avail_in = have; + return ret; +} + +int ZEXPORT inflateBack9End(strm) +z_stream FAR *strm; +{ + if (strm == Z_NULL || strm->state == Z_NULL || strm->zfree == (free_func)0) + return Z_STREAM_ERROR; + ZFREE(strm, strm->state); + strm->state = Z_NULL; + Tracev((stderr, "inflate: end\n")); + return Z_OK; +} diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/infback9/infback9.h b/software/scsi2sd-util/zlib-1.2.8/contrib/infback9/infback9.h new file mode 100644 index 0000000..1073c0a --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/infback9/infback9.h @@ -0,0 +1,37 @@ +/* infback9.h -- header for using inflateBack9 functions + * Copyright (C) 2003 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* + * This header file and associated patches provide a decoder for PKWare's + * undocumented deflate64 compression method (method 9). Use with infback9.c, + * inftree9.h, inftree9.c, and inffix9.h. These patches are not supported. + * This should be compiled with zlib, since it uses zutil.h and zutil.o. + * This code has not yet been tested on 16-bit architectures. See the + * comments in zlib.h for inflateBack() usage. These functions are used + * identically, except that there is no windowBits parameter, and a 64K + * window must be provided. Also if int's are 16 bits, then a zero for + * the third parameter of the "out" function actually means 65536UL. + * zlib.h must be included before this header file. + */ + +#ifdef __cplusplus +extern "C" { +#endif + +ZEXTERN int ZEXPORT inflateBack9 OF((z_stream FAR *strm, + in_func in, void FAR *in_desc, + out_func out, void FAR *out_desc)); +ZEXTERN int ZEXPORT inflateBack9End OF((z_stream FAR *strm)); +ZEXTERN int ZEXPORT inflateBack9Init_ OF((z_stream FAR *strm, + unsigned char FAR *window, + const char *version, + int stream_size)); +#define inflateBack9Init(strm, window) \ + inflateBack9Init_((strm), (window), \ + ZLIB_VERSION, sizeof(z_stream)) + +#ifdef __cplusplus +} +#endif diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/infback9/inffix9.h b/software/scsi2sd-util/zlib-1.2.8/contrib/infback9/inffix9.h new file mode 100644 index 0000000..ee5671d --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/infback9/inffix9.h @@ -0,0 +1,107 @@ + /* inffix9.h -- table for decoding deflate64 fixed codes + * Generated automatically by makefixed9(). + */ + + /* WARNING: this file should *not* be used by applications. + It is part of the implementation of this library and is + subject to change. Applications should only use zlib.h. + */ + + static const code lenfix[512] = { + {96,7,0},{0,8,80},{0,8,16},{132,8,115},{130,7,31},{0,8,112}, + {0,8,48},{0,9,192},{128,7,10},{0,8,96},{0,8,32},{0,9,160}, + {0,8,0},{0,8,128},{0,8,64},{0,9,224},{128,7,6},{0,8,88}, + {0,8,24},{0,9,144},{131,7,59},{0,8,120},{0,8,56},{0,9,208}, + {129,7,17},{0,8,104},{0,8,40},{0,9,176},{0,8,8},{0,8,136}, + {0,8,72},{0,9,240},{128,7,4},{0,8,84},{0,8,20},{133,8,227}, + {131,7,43},{0,8,116},{0,8,52},{0,9,200},{129,7,13},{0,8,100}, + {0,8,36},{0,9,168},{0,8,4},{0,8,132},{0,8,68},{0,9,232}, + {128,7,8},{0,8,92},{0,8,28},{0,9,152},{132,7,83},{0,8,124}, + {0,8,60},{0,9,216},{130,7,23},{0,8,108},{0,8,44},{0,9,184}, + {0,8,12},{0,8,140},{0,8,76},{0,9,248},{128,7,3},{0,8,82}, + {0,8,18},{133,8,163},{131,7,35},{0,8,114},{0,8,50},{0,9,196}, + {129,7,11},{0,8,98},{0,8,34},{0,9,164},{0,8,2},{0,8,130}, + {0,8,66},{0,9,228},{128,7,7},{0,8,90},{0,8,26},{0,9,148}, + {132,7,67},{0,8,122},{0,8,58},{0,9,212},{130,7,19},{0,8,106}, + {0,8,42},{0,9,180},{0,8,10},{0,8,138},{0,8,74},{0,9,244}, + {128,7,5},{0,8,86},{0,8,22},{65,8,0},{131,7,51},{0,8,118}, + {0,8,54},{0,9,204},{129,7,15},{0,8,102},{0,8,38},{0,9,172}, + {0,8,6},{0,8,134},{0,8,70},{0,9,236},{128,7,9},{0,8,94}, + {0,8,30},{0,9,156},{132,7,99},{0,8,126},{0,8,62},{0,9,220}, + {130,7,27},{0,8,110},{0,8,46},{0,9,188},{0,8,14},{0,8,142}, + {0,8,78},{0,9,252},{96,7,0},{0,8,81},{0,8,17},{133,8,131}, + {130,7,31},{0,8,113},{0,8,49},{0,9,194},{128,7,10},{0,8,97}, + {0,8,33},{0,9,162},{0,8,1},{0,8,129},{0,8,65},{0,9,226}, + {128,7,6},{0,8,89},{0,8,25},{0,9,146},{131,7,59},{0,8,121}, + {0,8,57},{0,9,210},{129,7,17},{0,8,105},{0,8,41},{0,9,178}, + {0,8,9},{0,8,137},{0,8,73},{0,9,242},{128,7,4},{0,8,85}, + {0,8,21},{144,8,3},{131,7,43},{0,8,117},{0,8,53},{0,9,202}, + {129,7,13},{0,8,101},{0,8,37},{0,9,170},{0,8,5},{0,8,133}, + {0,8,69},{0,9,234},{128,7,8},{0,8,93},{0,8,29},{0,9,154}, + {132,7,83},{0,8,125},{0,8,61},{0,9,218},{130,7,23},{0,8,109}, + {0,8,45},{0,9,186},{0,8,13},{0,8,141},{0,8,77},{0,9,250}, + {128,7,3},{0,8,83},{0,8,19},{133,8,195},{131,7,35},{0,8,115}, + {0,8,51},{0,9,198},{129,7,11},{0,8,99},{0,8,35},{0,9,166}, + {0,8,3},{0,8,131},{0,8,67},{0,9,230},{128,7,7},{0,8,91}, + {0,8,27},{0,9,150},{132,7,67},{0,8,123},{0,8,59},{0,9,214}, + {130,7,19},{0,8,107},{0,8,43},{0,9,182},{0,8,11},{0,8,139}, + {0,8,75},{0,9,246},{128,7,5},{0,8,87},{0,8,23},{77,8,0}, + {131,7,51},{0,8,119},{0,8,55},{0,9,206},{129,7,15},{0,8,103}, + {0,8,39},{0,9,174},{0,8,7},{0,8,135},{0,8,71},{0,9,238}, + {128,7,9},{0,8,95},{0,8,31},{0,9,158},{132,7,99},{0,8,127}, + {0,8,63},{0,9,222},{130,7,27},{0,8,111},{0,8,47},{0,9,190}, + {0,8,15},{0,8,143},{0,8,79},{0,9,254},{96,7,0},{0,8,80}, + {0,8,16},{132,8,115},{130,7,31},{0,8,112},{0,8,48},{0,9,193}, + {128,7,10},{0,8,96},{0,8,32},{0,9,161},{0,8,0},{0,8,128}, + {0,8,64},{0,9,225},{128,7,6},{0,8,88},{0,8,24},{0,9,145}, + {131,7,59},{0,8,120},{0,8,56},{0,9,209},{129,7,17},{0,8,104}, + {0,8,40},{0,9,177},{0,8,8},{0,8,136},{0,8,72},{0,9,241}, + {128,7,4},{0,8,84},{0,8,20},{133,8,227},{131,7,43},{0,8,116}, + {0,8,52},{0,9,201},{129,7,13},{0,8,100},{0,8,36},{0,9,169}, + {0,8,4},{0,8,132},{0,8,68},{0,9,233},{128,7,8},{0,8,92}, + {0,8,28},{0,9,153},{132,7,83},{0,8,124},{0,8,60},{0,9,217}, + {130,7,23},{0,8,108},{0,8,44},{0,9,185},{0,8,12},{0,8,140}, + {0,8,76},{0,9,249},{128,7,3},{0,8,82},{0,8,18},{133,8,163}, + {131,7,35},{0,8,114},{0,8,50},{0,9,197},{129,7,11},{0,8,98}, + {0,8,34},{0,9,165},{0,8,2},{0,8,130},{0,8,66},{0,9,229}, + {128,7,7},{0,8,90},{0,8,26},{0,9,149},{132,7,67},{0,8,122}, + {0,8,58},{0,9,213},{130,7,19},{0,8,106},{0,8,42},{0,9,181}, + {0,8,10},{0,8,138},{0,8,74},{0,9,245},{128,7,5},{0,8,86}, + {0,8,22},{65,8,0},{131,7,51},{0,8,118},{0,8,54},{0,9,205}, + {129,7,15},{0,8,102},{0,8,38},{0,9,173},{0,8,6},{0,8,134}, + {0,8,70},{0,9,237},{128,7,9},{0,8,94},{0,8,30},{0,9,157}, + {132,7,99},{0,8,126},{0,8,62},{0,9,221},{130,7,27},{0,8,110}, + {0,8,46},{0,9,189},{0,8,14},{0,8,142},{0,8,78},{0,9,253}, + {96,7,0},{0,8,81},{0,8,17},{133,8,131},{130,7,31},{0,8,113}, + {0,8,49},{0,9,195},{128,7,10},{0,8,97},{0,8,33},{0,9,163}, + {0,8,1},{0,8,129},{0,8,65},{0,9,227},{128,7,6},{0,8,89}, + {0,8,25},{0,9,147},{131,7,59},{0,8,121},{0,8,57},{0,9,211}, + {129,7,17},{0,8,105},{0,8,41},{0,9,179},{0,8,9},{0,8,137}, + {0,8,73},{0,9,243},{128,7,4},{0,8,85},{0,8,21},{144,8,3}, + {131,7,43},{0,8,117},{0,8,53},{0,9,203},{129,7,13},{0,8,101}, + {0,8,37},{0,9,171},{0,8,5},{0,8,133},{0,8,69},{0,9,235}, + {128,7,8},{0,8,93},{0,8,29},{0,9,155},{132,7,83},{0,8,125}, + {0,8,61},{0,9,219},{130,7,23},{0,8,109},{0,8,45},{0,9,187}, + {0,8,13},{0,8,141},{0,8,77},{0,9,251},{128,7,3},{0,8,83}, + {0,8,19},{133,8,195},{131,7,35},{0,8,115},{0,8,51},{0,9,199}, + {129,7,11},{0,8,99},{0,8,35},{0,9,167},{0,8,3},{0,8,131}, + {0,8,67},{0,9,231},{128,7,7},{0,8,91},{0,8,27},{0,9,151}, + {132,7,67},{0,8,123},{0,8,59},{0,9,215},{130,7,19},{0,8,107}, + {0,8,43},{0,9,183},{0,8,11},{0,8,139},{0,8,75},{0,9,247}, + {128,7,5},{0,8,87},{0,8,23},{77,8,0},{131,7,51},{0,8,119}, + {0,8,55},{0,9,207},{129,7,15},{0,8,103},{0,8,39},{0,9,175}, + {0,8,7},{0,8,135},{0,8,71},{0,9,239},{128,7,9},{0,8,95}, + {0,8,31},{0,9,159},{132,7,99},{0,8,127},{0,8,63},{0,9,223}, + {130,7,27},{0,8,111},{0,8,47},{0,9,191},{0,8,15},{0,8,143}, + {0,8,79},{0,9,255} + }; + + static const code distfix[32] = { + {128,5,1},{135,5,257},{131,5,17},{139,5,4097},{129,5,5}, + {137,5,1025},{133,5,65},{141,5,16385},{128,5,3},{136,5,513}, + {132,5,33},{140,5,8193},{130,5,9},{138,5,2049},{134,5,129}, + {142,5,32769},{128,5,2},{135,5,385},{131,5,25},{139,5,6145}, + {129,5,7},{137,5,1537},{133,5,97},{141,5,24577},{128,5,4}, + {136,5,769},{132,5,49},{140,5,12289},{130,5,13},{138,5,3073}, + {134,5,193},{142,5,49153} + }; diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/infback9/inflate9.h b/software/scsi2sd-util/zlib-1.2.8/contrib/infback9/inflate9.h new file mode 100644 index 0000000..ee9a793 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/infback9/inflate9.h @@ -0,0 +1,47 @@ +/* inflate9.h -- internal inflate state definition + * Copyright (C) 1995-2003 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* WARNING: this file should *not* be used by applications. It is + part of the implementation of the compression library and is + subject to change. Applications should only use zlib.h. + */ + +/* Possible inflate modes between inflate() calls */ +typedef enum { + TYPE, /* i: waiting for type bits, including last-flag bit */ + STORED, /* i: waiting for stored size (length and complement) */ + TABLE, /* i: waiting for dynamic block table lengths */ + LEN, /* i: waiting for length/lit code */ + DONE, /* finished check, done -- remain here until reset */ + BAD /* got a data error -- remain here until reset */ +} inflate_mode; + +/* + State transitions between above modes - + + (most modes can go to the BAD mode -- not shown for clarity) + + Read deflate blocks: + TYPE -> STORED or TABLE or LEN or DONE + STORED -> TYPE + TABLE -> LENLENS -> CODELENS -> LEN + Read deflate codes: + LEN -> LEN or TYPE + */ + +/* state maintained between inflate() calls. Approximately 7K bytes. */ +struct inflate_state { + /* sliding window */ + unsigned char FAR *window; /* allocated sliding window, if needed */ + /* dynamic table building */ + unsigned ncode; /* number of code length code lengths */ + unsigned nlen; /* number of length code lengths */ + unsigned ndist; /* number of distance code lengths */ + unsigned have; /* number of code lengths in lens[] */ + code FAR *next; /* next available space in codes[] */ + unsigned short lens[320]; /* temporary storage for code lengths */ + unsigned short work[288]; /* work area for code table building */ + code codes[ENOUGH]; /* space for code tables */ +}; diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/infback9/inftree9.c b/software/scsi2sd-util/zlib-1.2.8/contrib/infback9/inftree9.c new file mode 100644 index 0000000..4a73ad2 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/infback9/inftree9.c @@ -0,0 +1,324 @@ +/* inftree9.c -- generate Huffman trees for efficient decoding + * Copyright (C) 1995-2013 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +#include "zutil.h" +#include "inftree9.h" + +#define MAXBITS 15 + +const char inflate9_copyright[] = + " inflate9 1.2.8 Copyright 1995-2013 Mark Adler "; +/* + If you use the zlib library in a product, an acknowledgment is welcome + in the documentation of your product. If for some reason you cannot + include such an acknowledgment, I would appreciate that you keep this + copyright string in the executable of your product. + */ + +/* + Build a set of tables to decode the provided canonical Huffman code. + The code lengths are lens[0..codes-1]. The result starts at *table, + whose indices are 0..2^bits-1. work is a writable array of at least + lens shorts, which is used as a work area. type is the type of code + to be generated, CODES, LENS, or DISTS. On return, zero is success, + -1 is an invalid code, and +1 means that ENOUGH isn't enough. table + on return points to the next available entry's address. bits is the + requested root table index bits, and on return it is the actual root + table index bits. It will differ if the request is greater than the + longest code or if it is less than the shortest code. + */ +int inflate_table9(type, lens, codes, table, bits, work) +codetype type; +unsigned short FAR *lens; +unsigned codes; +code FAR * FAR *table; +unsigned FAR *bits; +unsigned short FAR *work; +{ + unsigned len; /* a code's length in bits */ + unsigned sym; /* index of code symbols */ + unsigned min, max; /* minimum and maximum code lengths */ + unsigned root; /* number of index bits for root table */ + unsigned curr; /* number of index bits for current table */ + unsigned drop; /* code bits to drop for sub-table */ + int left; /* number of prefix codes available */ + unsigned used; /* code entries in table used */ + unsigned huff; /* Huffman code */ + unsigned incr; /* for incrementing code, index */ + unsigned fill; /* index for replicating entries */ + unsigned low; /* low bits for current root entry */ + unsigned mask; /* mask for low root bits */ + code this; /* table entry for duplication */ + code FAR *next; /* next available space in table */ + const unsigned short FAR *base; /* base value table to use */ + const unsigned short FAR *extra; /* extra bits table to use */ + int end; /* use base and extra for symbol > end */ + unsigned short count[MAXBITS+1]; /* number of codes of each length */ + unsigned short offs[MAXBITS+1]; /* offsets in table for each length */ + static const unsigned short lbase[31] = { /* Length codes 257..285 base */ + 3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 15, 17, + 19, 23, 27, 31, 35, 43, 51, 59, 67, 83, 99, 115, + 131, 163, 195, 227, 3, 0, 0}; + static const unsigned short lext[31] = { /* Length codes 257..285 extra */ + 128, 128, 128, 128, 128, 128, 128, 128, 129, 129, 129, 129, + 130, 130, 130, 130, 131, 131, 131, 131, 132, 132, 132, 132, + 133, 133, 133, 133, 144, 72, 78}; + static const unsigned short dbase[32] = { /* Distance codes 0..31 base */ + 1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, + 65, 97, 129, 193, 257, 385, 513, 769, 1025, 1537, 2049, 3073, + 4097, 6145, 8193, 12289, 16385, 24577, 32769, 49153}; + static const unsigned short dext[32] = { /* Distance codes 0..31 extra */ + 128, 128, 128, 128, 129, 129, 130, 130, 131, 131, 132, 132, + 133, 133, 134, 134, 135, 135, 136, 136, 137, 137, 138, 138, + 139, 139, 140, 140, 141, 141, 142, 142}; + + /* + Process a set of code lengths to create a canonical Huffman code. The + code lengths are lens[0..codes-1]. Each length corresponds to the + symbols 0..codes-1. The Huffman code is generated by first sorting the + symbols by length from short to long, and retaining the symbol order + for codes with equal lengths. Then the code starts with all zero bits + for the first code of the shortest length, and the codes are integer + increments for the same length, and zeros are appended as the length + increases. For the deflate format, these bits are stored backwards + from their more natural integer increment ordering, and so when the + decoding tables are built in the large loop below, the integer codes + are incremented backwards. + + This routine assumes, but does not check, that all of the entries in + lens[] are in the range 0..MAXBITS. The caller must assure this. + 1..MAXBITS is interpreted as that code length. zero means that that + symbol does not occur in this code. + + The codes are sorted by computing a count of codes for each length, + creating from that a table of starting indices for each length in the + sorted table, and then entering the symbols in order in the sorted + table. The sorted table is work[], with that space being provided by + the caller. + + The length counts are used for other purposes as well, i.e. finding + the minimum and maximum length codes, determining if there are any + codes at all, checking for a valid set of lengths, and looking ahead + at length counts to determine sub-table sizes when building the + decoding tables. + */ + + /* accumulate lengths for codes (assumes lens[] all in 0..MAXBITS) */ + for (len = 0; len <= MAXBITS; len++) + count[len] = 0; + for (sym = 0; sym < codes; sym++) + count[lens[sym]]++; + + /* bound code lengths, force root to be within code lengths */ + root = *bits; + for (max = MAXBITS; max >= 1; max--) + if (count[max] != 0) break; + if (root > max) root = max; + if (max == 0) return -1; /* no codes! */ + for (min = 1; min <= MAXBITS; min++) + if (count[min] != 0) break; + if (root < min) root = min; + + /* check for an over-subscribed or incomplete set of lengths */ + left = 1; + for (len = 1; len <= MAXBITS; len++) { + left <<= 1; + left -= count[len]; + if (left < 0) return -1; /* over-subscribed */ + } + if (left > 0 && (type == CODES || max != 1)) + return -1; /* incomplete set */ + + /* generate offsets into symbol table for each length for sorting */ + offs[1] = 0; + for (len = 1; len < MAXBITS; len++) + offs[len + 1] = offs[len] + count[len]; + + /* sort symbols by length, by symbol order within each length */ + for (sym = 0; sym < codes; sym++) + if (lens[sym] != 0) work[offs[lens[sym]]++] = (unsigned short)sym; + + /* + Create and fill in decoding tables. In this loop, the table being + filled is at next and has curr index bits. The code being used is huff + with length len. That code is converted to an index by dropping drop + bits off of the bottom. For codes where len is less than drop + curr, + those top drop + curr - len bits are incremented through all values to + fill the table with replicated entries. + + root is the number of index bits for the root table. When len exceeds + root, sub-tables are created pointed to by the root entry with an index + of the low root bits of huff. This is saved in low to check for when a + new sub-table should be started. drop is zero when the root table is + being filled, and drop is root when sub-tables are being filled. + + When a new sub-table is needed, it is necessary to look ahead in the + code lengths to determine what size sub-table is needed. The length + counts are used for this, and so count[] is decremented as codes are + entered in the tables. + + used keeps track of how many table entries have been allocated from the + provided *table space. It is checked for LENS and DIST tables against + the constants ENOUGH_LENS and ENOUGH_DISTS to guard against changes in + the initial root table size constants. See the comments in inftree9.h + for more information. + + sym increments through all symbols, and the loop terminates when + all codes of length max, i.e. all codes, have been processed. This + routine permits incomplete codes, so another loop after this one fills + in the rest of the decoding tables with invalid code markers. + */ + + /* set up for code type */ + switch (type) { + case CODES: + base = extra = work; /* dummy value--not used */ + end = 19; + break; + case LENS: + base = lbase; + base -= 257; + extra = lext; + extra -= 257; + end = 256; + break; + default: /* DISTS */ + base = dbase; + extra = dext; + end = -1; + } + + /* initialize state for loop */ + huff = 0; /* starting code */ + sym = 0; /* starting code symbol */ + len = min; /* starting code length */ + next = *table; /* current table to fill in */ + curr = root; /* current table index bits */ + drop = 0; /* current bits to drop from code for index */ + low = (unsigned)(-1); /* trigger new sub-table when len > root */ + used = 1U << root; /* use root table entries */ + mask = used - 1; /* mask for comparing low */ + + /* check available table space */ + if ((type == LENS && used >= ENOUGH_LENS) || + (type == DISTS && used >= ENOUGH_DISTS)) + return 1; + + /* process all codes and make table entries */ + for (;;) { + /* create table entry */ + this.bits = (unsigned char)(len - drop); + if ((int)(work[sym]) < end) { + this.op = (unsigned char)0; + this.val = work[sym]; + } + else if ((int)(work[sym]) > end) { + this.op = (unsigned char)(extra[work[sym]]); + this.val = base[work[sym]]; + } + else { + this.op = (unsigned char)(32 + 64); /* end of block */ + this.val = 0; + } + + /* replicate for those indices with low len bits equal to huff */ + incr = 1U << (len - drop); + fill = 1U << curr; + do { + fill -= incr; + next[(huff >> drop) + fill] = this; + } while (fill != 0); + + /* backwards increment the len-bit code huff */ + incr = 1U << (len - 1); + while (huff & incr) + incr >>= 1; + if (incr != 0) { + huff &= incr - 1; + huff += incr; + } + else + huff = 0; + + /* go to next symbol, update count, len */ + sym++; + if (--(count[len]) == 0) { + if (len == max) break; + len = lens[work[sym]]; + } + + /* create new sub-table if needed */ + if (len > root && (huff & mask) != low) { + /* if first time, transition to sub-tables */ + if (drop == 0) + drop = root; + + /* increment past last table */ + next += 1U << curr; + + /* determine length of next table */ + curr = len - drop; + left = (int)(1 << curr); + while (curr + drop < max) { + left -= count[curr + drop]; + if (left <= 0) break; + curr++; + left <<= 1; + } + + /* check for enough space */ + used += 1U << curr; + if ((type == LENS && used >= ENOUGH_LENS) || + (type == DISTS && used >= ENOUGH_DISTS)) + return 1; + + /* point entry in root table to sub-table */ + low = huff & mask; + (*table)[low].op = (unsigned char)curr; + (*table)[low].bits = (unsigned char)root; + (*table)[low].val = (unsigned short)(next - *table); + } + } + + /* + Fill in rest of table for incomplete codes. This loop is similar to the + loop above in incrementing huff for table indices. It is assumed that + len is equal to curr + drop, so there is no loop needed to increment + through high index bits. When the current sub-table is filled, the loop + drops back to the root table to fill in any remaining entries there. + */ + this.op = (unsigned char)64; /* invalid code marker */ + this.bits = (unsigned char)(len - drop); + this.val = (unsigned short)0; + while (huff != 0) { + /* when done with sub-table, drop back to root table */ + if (drop != 0 && (huff & mask) != low) { + drop = 0; + len = root; + next = *table; + curr = root; + this.bits = (unsigned char)len; + } + + /* put invalid code marker in table */ + next[huff >> drop] = this; + + /* backwards increment the len-bit code huff */ + incr = 1U << (len - 1); + while (huff & incr) + incr >>= 1; + if (incr != 0) { + huff &= incr - 1; + huff += incr; + } + else + huff = 0; + } + + /* set return parameters */ + *table += used; + *bits = root; + return 0; +} diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/infback9/inftree9.h b/software/scsi2sd-util/zlib-1.2.8/contrib/infback9/inftree9.h new file mode 100644 index 0000000..5ab21f0 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/infback9/inftree9.h @@ -0,0 +1,61 @@ +/* inftree9.h -- header to use inftree9.c + * Copyright (C) 1995-2008 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* WARNING: this file should *not* be used by applications. It is + part of the implementation of the compression library and is + subject to change. Applications should only use zlib.h. + */ + +/* Structure for decoding tables. Each entry provides either the + information needed to do the operation requested by the code that + indexed that table entry, or it provides a pointer to another + table that indexes more bits of the code. op indicates whether + the entry is a pointer to another table, a literal, a length or + distance, an end-of-block, or an invalid code. For a table + pointer, the low four bits of op is the number of index bits of + that table. For a length or distance, the low four bits of op + is the number of extra bits to get after the code. bits is + the number of bits in this code or part of the code to drop off + of the bit buffer. val is the actual byte to output in the case + of a literal, the base length or distance, or the offset from + the current table to the next table. Each entry is four bytes. */ +typedef struct { + unsigned char op; /* operation, extra bits, table bits */ + unsigned char bits; /* bits in this part of the code */ + unsigned short val; /* offset in table or code value */ +} code; + +/* op values as set by inflate_table(): + 00000000 - literal + 0000tttt - table link, tttt != 0 is the number of table index bits + 100eeeee - length or distance, eeee is the number of extra bits + 01100000 - end of block + 01000000 - invalid code + */ + +/* Maximum size of the dynamic table. The maximum number of code structures is + 1446, which is the sum of 852 for literal/length codes and 594 for distance + codes. These values were found by exhaustive searches using the program + examples/enough.c found in the zlib distribtution. The arguments to that + program are the number of symbols, the initial root table size, and the + maximum bit length of a code. "enough 286 9 15" for literal/length codes + returns returns 852, and "enough 32 6 15" for distance codes returns 594. + The initial root table size (9 or 6) is found in the fifth argument of the + inflate_table() calls in infback9.c. If the root table size is changed, + then these maximum sizes would be need to be recalculated and updated. */ +#define ENOUGH_LENS 852 +#define ENOUGH_DISTS 594 +#define ENOUGH (ENOUGH_LENS+ENOUGH_DISTS) + +/* Type of code to build for inflate_table9() */ +typedef enum { + CODES, + LENS, + DISTS +} codetype; + +extern int inflate_table9 OF((codetype type, unsigned short FAR *lens, + unsigned codes, code FAR * FAR *table, + unsigned FAR *bits, unsigned short FAR *work)); diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/inflate86/inffas86.c b/software/scsi2sd-util/zlib-1.2.8/contrib/inflate86/inffas86.c new file mode 100644 index 0000000..7292f67 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/inflate86/inffas86.c @@ -0,0 +1,1157 @@ +/* inffas86.c is a hand tuned assembler version of + * + * inffast.c -- fast decoding + * Copyright (C) 1995-2003 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + * + * Copyright (C) 2003 Chris Anderson + * Please use the copyright conditions above. + * + * Dec-29-2003 -- I added AMD64 inflate asm support. This version is also + * slightly quicker on x86 systems because, instead of using rep movsb to copy + * data, it uses rep movsw, which moves data in 2-byte chunks instead of single + * bytes. I've tested the AMD64 code on a Fedora Core 1 + the x86_64 updates + * from http://fedora.linux.duke.edu/fc1_x86_64 + * which is running on an Athlon 64 3000+ / Gigabyte GA-K8VT800M system with + * 1GB ram. The 64-bit version is about 4% faster than the 32-bit version, + * when decompressing mozilla-source-1.3.tar.gz. + * + * Mar-13-2003 -- Most of this is derived from inffast.S which is derived from + * the gcc -S output of zlib-1.2.0/inffast.c. Zlib-1.2.0 is in beta release at + * the moment. I have successfully compiled and tested this code with gcc2.96, + * gcc3.2, icc5.0, msvc6.0. It is very close to the speed of inffast.S + * compiled with gcc -DNO_MMX, but inffast.S is still faster on the P3 with MMX + * enabled. I will attempt to merge the MMX code into this version. Newer + * versions of this and inffast.S can be found at + * http://www.eetbeetee.com/zlib/ and http://www.charm.net/~christop/zlib/ + */ + +#include "zutil.h" +#include "inftrees.h" +#include "inflate.h" +#include "inffast.h" + +/* Mark Adler's comments from inffast.c: */ + +/* + Decode literal, length, and distance codes and write out the resulting + literal and match bytes until either not enough input or output is + available, an end-of-block is encountered, or a data error is encountered. + When large enough input and output buffers are supplied to inflate(), for + example, a 16K input buffer and a 64K output buffer, more than 95% of the + inflate execution time is spent in this routine. + + Entry assumptions: + + state->mode == LEN + strm->avail_in >= 6 + strm->avail_out >= 258 + start >= strm->avail_out + state->bits < 8 + + On return, state->mode is one of: + + LEN -- ran out of enough output space or enough available input + TYPE -- reached end of block code, inflate() to interpret next block + BAD -- error in block data + + Notes: + + - The maximum input bits used by a length/distance pair is 15 bits for the + length code, 5 bits for the length extra, 15 bits for the distance code, + and 13 bits for the distance extra. This totals 48 bits, or six bytes. + Therefore if strm->avail_in >= 6, then there is enough input to avoid + checking for available input while decoding. + + - The maximum bytes that a single length/distance pair can output is 258 + bytes, which is the maximum length that can be coded. inflate_fast() + requires strm->avail_out >= 258 for each loop to avoid checking for + output space. + */ +void inflate_fast(strm, start) +z_streamp strm; +unsigned start; /* inflate()'s starting value for strm->avail_out */ +{ + struct inflate_state FAR *state; + struct inffast_ar { +/* 64 32 x86 x86_64 */ +/* ar offset register */ +/* 0 0 */ void *esp; /* esp save */ +/* 8 4 */ void *ebp; /* ebp save */ +/* 16 8 */ unsigned char FAR *in; /* esi rsi local strm->next_in */ +/* 24 12 */ unsigned char FAR *last; /* r9 while in < last */ +/* 32 16 */ unsigned char FAR *out; /* edi rdi local strm->next_out */ +/* 40 20 */ unsigned char FAR *beg; /* inflate()'s init next_out */ +/* 48 24 */ unsigned char FAR *end; /* r10 while out < end */ +/* 56 28 */ unsigned char FAR *window;/* size of window, wsize!=0 */ +/* 64 32 */ code const FAR *lcode; /* ebp rbp local strm->lencode */ +/* 72 36 */ code const FAR *dcode; /* r11 local strm->distcode */ +/* 80 40 */ unsigned long hold; /* edx rdx local strm->hold */ +/* 88 44 */ unsigned bits; /* ebx rbx local strm->bits */ +/* 92 48 */ unsigned wsize; /* window size */ +/* 96 52 */ unsigned write; /* window write index */ +/*100 56 */ unsigned lmask; /* r12 mask for lcode */ +/*104 60 */ unsigned dmask; /* r13 mask for dcode */ +/*108 64 */ unsigned len; /* r14 match length */ +/*112 68 */ unsigned dist; /* r15 match distance */ +/*116 72 */ unsigned status; /* set when state chng*/ + } ar; + +#if defined( __GNUC__ ) && defined( __amd64__ ) && ! defined( __i386 ) +#define PAD_AVAIL_IN 6 +#define PAD_AVAIL_OUT 258 +#else +#define PAD_AVAIL_IN 5 +#define PAD_AVAIL_OUT 257 +#endif + + /* copy state to local variables */ + state = (struct inflate_state FAR *)strm->state; + ar.in = strm->next_in; + ar.last = ar.in + (strm->avail_in - PAD_AVAIL_IN); + ar.out = strm->next_out; + ar.beg = ar.out - (start - strm->avail_out); + ar.end = ar.out + (strm->avail_out - PAD_AVAIL_OUT); + ar.wsize = state->wsize; + ar.write = state->wnext; + ar.window = state->window; + ar.hold = state->hold; + ar.bits = state->bits; + ar.lcode = state->lencode; + ar.dcode = state->distcode; + ar.lmask = (1U << state->lenbits) - 1; + ar.dmask = (1U << state->distbits) - 1; + + /* decode literals and length/distances until end-of-block or not enough + input data or output space */ + + /* align in on 1/2 hold size boundary */ + while (((unsigned long)(void *)ar.in & (sizeof(ar.hold) / 2 - 1)) != 0) { + ar.hold += (unsigned long)*ar.in++ << ar.bits; + ar.bits += 8; + } + +#if defined( __GNUC__ ) && defined( __amd64__ ) && ! defined( __i386 ) + __asm__ __volatile__ ( +" leaq %0, %%rax\n" +" movq %%rbp, 8(%%rax)\n" /* save regs rbp and rsp */ +" movq %%rsp, (%%rax)\n" +" movq %%rax, %%rsp\n" /* make rsp point to &ar */ +" movq 16(%%rsp), %%rsi\n" /* rsi = in */ +" movq 32(%%rsp), %%rdi\n" /* rdi = out */ +" movq 24(%%rsp), %%r9\n" /* r9 = last */ +" movq 48(%%rsp), %%r10\n" /* r10 = end */ +" movq 64(%%rsp), %%rbp\n" /* rbp = lcode */ +" movq 72(%%rsp), %%r11\n" /* r11 = dcode */ +" movq 80(%%rsp), %%rdx\n" /* rdx = hold */ +" movl 88(%%rsp), %%ebx\n" /* ebx = bits */ +" movl 100(%%rsp), %%r12d\n" /* r12d = lmask */ +" movl 104(%%rsp), %%r13d\n" /* r13d = dmask */ + /* r14d = len */ + /* r15d = dist */ +" cld\n" +" cmpq %%rdi, %%r10\n" +" je .L_one_time\n" /* if only one decode left */ +" cmpq %%rsi, %%r9\n" +" je .L_one_time\n" +" jmp .L_do_loop\n" + +".L_one_time:\n" +" movq %%r12, %%r8\n" /* r8 = lmask */ +" cmpb $32, %%bl\n" +" ja .L_get_length_code_one_time\n" + +" lodsl\n" /* eax = *(uint *)in++ */ +" movb %%bl, %%cl\n" /* cl = bits, needs it for shifting */ +" addb $32, %%bl\n" /* bits += 32 */ +" shlq %%cl, %%rax\n" +" orq %%rax, %%rdx\n" /* hold |= *((uint *)in)++ << bits */ +" jmp .L_get_length_code_one_time\n" + +".align 32,0x90\n" +".L_while_test:\n" +" cmpq %%rdi, %%r10\n" +" jbe .L_break_loop\n" +" cmpq %%rsi, %%r9\n" +" jbe .L_break_loop\n" + +".L_do_loop:\n" +" movq %%r12, %%r8\n" /* r8 = lmask */ +" cmpb $32, %%bl\n" +" ja .L_get_length_code\n" /* if (32 < bits) */ + +" lodsl\n" /* eax = *(uint *)in++ */ +" movb %%bl, %%cl\n" /* cl = bits, needs it for shifting */ +" addb $32, %%bl\n" /* bits += 32 */ +" shlq %%cl, %%rax\n" +" orq %%rax, %%rdx\n" /* hold |= *((uint *)in)++ << bits */ + +".L_get_length_code:\n" +" andq %%rdx, %%r8\n" /* r8 &= hold */ +" movl (%%rbp,%%r8,4), %%eax\n" /* eax = lcode[hold & lmask] */ + +" movb %%ah, %%cl\n" /* cl = this.bits */ +" subb %%ah, %%bl\n" /* bits -= this.bits */ +" shrq %%cl, %%rdx\n" /* hold >>= this.bits */ + +" testb %%al, %%al\n" +" jnz .L_test_for_length_base\n" /* if (op != 0) 45.7% */ + +" movq %%r12, %%r8\n" /* r8 = lmask */ +" shrl $16, %%eax\n" /* output this.val char */ +" stosb\n" + +".L_get_length_code_one_time:\n" +" andq %%rdx, %%r8\n" /* r8 &= hold */ +" movl (%%rbp,%%r8,4), %%eax\n" /* eax = lcode[hold & lmask] */ + +".L_dolen:\n" +" movb %%ah, %%cl\n" /* cl = this.bits */ +" subb %%ah, %%bl\n" /* bits -= this.bits */ +" shrq %%cl, %%rdx\n" /* hold >>= this.bits */ + +" testb %%al, %%al\n" +" jnz .L_test_for_length_base\n" /* if (op != 0) 45.7% */ + +" shrl $16, %%eax\n" /* output this.val char */ +" stosb\n" +" jmp .L_while_test\n" + +".align 32,0x90\n" +".L_test_for_length_base:\n" +" movl %%eax, %%r14d\n" /* len = this */ +" shrl $16, %%r14d\n" /* len = this.val */ +" movb %%al, %%cl\n" + +" testb $16, %%al\n" +" jz .L_test_for_second_level_length\n" /* if ((op & 16) == 0) 8% */ +" andb $15, %%cl\n" /* op &= 15 */ +" jz .L_decode_distance\n" /* if (!op) */ + +".L_add_bits_to_len:\n" +" subb %%cl, %%bl\n" +" xorl %%eax, %%eax\n" +" incl %%eax\n" +" shll %%cl, %%eax\n" +" decl %%eax\n" +" andl %%edx, %%eax\n" /* eax &= hold */ +" shrq %%cl, %%rdx\n" +" addl %%eax, %%r14d\n" /* len += hold & mask[op] */ + +".L_decode_distance:\n" +" movq %%r13, %%r8\n" /* r8 = dmask */ +" cmpb $32, %%bl\n" +" ja .L_get_distance_code\n" /* if (32 < bits) */ + +" lodsl\n" /* eax = *(uint *)in++ */ +" movb %%bl, %%cl\n" /* cl = bits, needs it for shifting */ +" addb $32, %%bl\n" /* bits += 32 */ +" shlq %%cl, %%rax\n" +" orq %%rax, %%rdx\n" /* hold |= *((uint *)in)++ << bits */ + +".L_get_distance_code:\n" +" andq %%rdx, %%r8\n" /* r8 &= hold */ +" movl (%%r11,%%r8,4), %%eax\n" /* eax = dcode[hold & dmask] */ + +".L_dodist:\n" +" movl %%eax, %%r15d\n" /* dist = this */ +" shrl $16, %%r15d\n" /* dist = this.val */ +" movb %%ah, %%cl\n" +" subb %%ah, %%bl\n" /* bits -= this.bits */ +" shrq %%cl, %%rdx\n" /* hold >>= this.bits */ +" movb %%al, %%cl\n" /* cl = this.op */ + +" testb $16, %%al\n" /* if ((op & 16) == 0) */ +" jz .L_test_for_second_level_dist\n" +" andb $15, %%cl\n" /* op &= 15 */ +" jz .L_check_dist_one\n" + +".L_add_bits_to_dist:\n" +" subb %%cl, %%bl\n" +" xorl %%eax, %%eax\n" +" incl %%eax\n" +" shll %%cl, %%eax\n" +" decl %%eax\n" /* (1 << op) - 1 */ +" andl %%edx, %%eax\n" /* eax &= hold */ +" shrq %%cl, %%rdx\n" +" addl %%eax, %%r15d\n" /* dist += hold & ((1 << op) - 1) */ + +".L_check_window:\n" +" movq %%rsi, %%r8\n" /* save in so from can use it's reg */ +" movq %%rdi, %%rax\n" +" subq 40(%%rsp), %%rax\n" /* nbytes = out - beg */ + +" cmpl %%r15d, %%eax\n" +" jb .L_clip_window\n" /* if (dist > nbytes) 4.2% */ + +" movl %%r14d, %%ecx\n" /* ecx = len */ +" movq %%rdi, %%rsi\n" +" subq %%r15, %%rsi\n" /* from = out - dist */ + +" sarl %%ecx\n" +" jnc .L_copy_two\n" /* if len % 2 == 0 */ + +" rep movsw\n" +" movb (%%rsi), %%al\n" +" movb %%al, (%%rdi)\n" +" incq %%rdi\n" + +" movq %%r8, %%rsi\n" /* move in back to %rsi, toss from */ +" jmp .L_while_test\n" + +".L_copy_two:\n" +" rep movsw\n" +" movq %%r8, %%rsi\n" /* move in back to %rsi, toss from */ +" jmp .L_while_test\n" + +".align 32,0x90\n" +".L_check_dist_one:\n" +" cmpl $1, %%r15d\n" /* if dist 1, is a memset */ +" jne .L_check_window\n" +" cmpq %%rdi, 40(%%rsp)\n" /* if out == beg, outside window */ +" je .L_check_window\n" + +" movl %%r14d, %%ecx\n" /* ecx = len */ +" movb -1(%%rdi), %%al\n" +" movb %%al, %%ah\n" + +" sarl %%ecx\n" +" jnc .L_set_two\n" +" movb %%al, (%%rdi)\n" +" incq %%rdi\n" + +".L_set_two:\n" +" rep stosw\n" +" jmp .L_while_test\n" + +".align 32,0x90\n" +".L_test_for_second_level_length:\n" +" testb $64, %%al\n" +" jnz .L_test_for_end_of_block\n" /* if ((op & 64) != 0) */ + +" xorl %%eax, %%eax\n" +" incl %%eax\n" +" shll %%cl, %%eax\n" +" decl %%eax\n" +" andl %%edx, %%eax\n" /* eax &= hold */ +" addl %%r14d, %%eax\n" /* eax += len */ +" movl (%%rbp,%%rax,4), %%eax\n" /* eax = lcode[val+(hold&mask[op])]*/ +" jmp .L_dolen\n" + +".align 32,0x90\n" +".L_test_for_second_level_dist:\n" +" testb $64, %%al\n" +" jnz .L_invalid_distance_code\n" /* if ((op & 64) != 0) */ + +" xorl %%eax, %%eax\n" +" incl %%eax\n" +" shll %%cl, %%eax\n" +" decl %%eax\n" +" andl %%edx, %%eax\n" /* eax &= hold */ +" addl %%r15d, %%eax\n" /* eax += dist */ +" movl (%%r11,%%rax,4), %%eax\n" /* eax = dcode[val+(hold&mask[op])]*/ +" jmp .L_dodist\n" + +".align 32,0x90\n" +".L_clip_window:\n" +" movl %%eax, %%ecx\n" /* ecx = nbytes */ +" movl 92(%%rsp), %%eax\n" /* eax = wsize, prepare for dist cmp */ +" negl %%ecx\n" /* nbytes = -nbytes */ + +" cmpl %%r15d, %%eax\n" +" jb .L_invalid_distance_too_far\n" /* if (dist > wsize) */ + +" addl %%r15d, %%ecx\n" /* nbytes = dist - nbytes */ +" cmpl $0, 96(%%rsp)\n" +" jne .L_wrap_around_window\n" /* if (write != 0) */ + +" movq 56(%%rsp), %%rsi\n" /* from = window */ +" subl %%ecx, %%eax\n" /* eax -= nbytes */ +" addq %%rax, %%rsi\n" /* from += wsize - nbytes */ + +" movl %%r14d, %%eax\n" /* eax = len */ +" cmpl %%ecx, %%r14d\n" +" jbe .L_do_copy\n" /* if (nbytes >= len) */ + +" subl %%ecx, %%eax\n" /* eax -= nbytes */ +" rep movsb\n" +" movq %%rdi, %%rsi\n" +" subq %%r15, %%rsi\n" /* from = &out[ -dist ] */ +" jmp .L_do_copy\n" + +".align 32,0x90\n" +".L_wrap_around_window:\n" +" movl 96(%%rsp), %%eax\n" /* eax = write */ +" cmpl %%eax, %%ecx\n" +" jbe .L_contiguous_in_window\n" /* if (write >= nbytes) */ + +" movl 92(%%rsp), %%esi\n" /* from = wsize */ +" addq 56(%%rsp), %%rsi\n" /* from += window */ +" addq %%rax, %%rsi\n" /* from += write */ +" subq %%rcx, %%rsi\n" /* from -= nbytes */ +" subl %%eax, %%ecx\n" /* nbytes -= write */ + +" movl %%r14d, %%eax\n" /* eax = len */ +" cmpl %%ecx, %%eax\n" +" jbe .L_do_copy\n" /* if (nbytes >= len) */ + +" subl %%ecx, %%eax\n" /* len -= nbytes */ +" rep movsb\n" +" movq 56(%%rsp), %%rsi\n" /* from = window */ +" movl 96(%%rsp), %%ecx\n" /* nbytes = write */ +" cmpl %%ecx, %%eax\n" +" jbe .L_do_copy\n" /* if (nbytes >= len) */ + +" subl %%ecx, %%eax\n" /* len -= nbytes */ +" rep movsb\n" +" movq %%rdi, %%rsi\n" +" subq %%r15, %%rsi\n" /* from = out - dist */ +" jmp .L_do_copy\n" + +".align 32,0x90\n" +".L_contiguous_in_window:\n" +" movq 56(%%rsp), %%rsi\n" /* rsi = window */ +" addq %%rax, %%rsi\n" +" subq %%rcx, %%rsi\n" /* from += write - nbytes */ + +" movl %%r14d, %%eax\n" /* eax = len */ +" cmpl %%ecx, %%eax\n" +" jbe .L_do_copy\n" /* if (nbytes >= len) */ + +" subl %%ecx, %%eax\n" /* len -= nbytes */ +" rep movsb\n" +" movq %%rdi, %%rsi\n" +" subq %%r15, %%rsi\n" /* from = out - dist */ +" jmp .L_do_copy\n" /* if (nbytes >= len) */ + +".align 32,0x90\n" +".L_do_copy:\n" +" movl %%eax, %%ecx\n" /* ecx = len */ +" rep movsb\n" + +" movq %%r8, %%rsi\n" /* move in back to %esi, toss from */ +" jmp .L_while_test\n" + +".L_test_for_end_of_block:\n" +" testb $32, %%al\n" +" jz .L_invalid_literal_length_code\n" +" movl $1, 116(%%rsp)\n" +" jmp .L_break_loop_with_status\n" + +".L_invalid_literal_length_code:\n" +" movl $2, 116(%%rsp)\n" +" jmp .L_break_loop_with_status\n" + +".L_invalid_distance_code:\n" +" movl $3, 116(%%rsp)\n" +" jmp .L_break_loop_with_status\n" + +".L_invalid_distance_too_far:\n" +" movl $4, 116(%%rsp)\n" +" jmp .L_break_loop_with_status\n" + +".L_break_loop:\n" +" movl $0, 116(%%rsp)\n" + +".L_break_loop_with_status:\n" +/* put in, out, bits, and hold back into ar and pop esp */ +" movq %%rsi, 16(%%rsp)\n" /* in */ +" movq %%rdi, 32(%%rsp)\n" /* out */ +" movl %%ebx, 88(%%rsp)\n" /* bits */ +" movq %%rdx, 80(%%rsp)\n" /* hold */ +" movq (%%rsp), %%rax\n" /* restore rbp and rsp */ +" movq 8(%%rsp), %%rbp\n" +" movq %%rax, %%rsp\n" + : + : "m" (ar) + : "memory", "%rax", "%rbx", "%rcx", "%rdx", "%rsi", "%rdi", + "%r8", "%r9", "%r10", "%r11", "%r12", "%r13", "%r14", "%r15" + ); +#elif ( defined( __GNUC__ ) || defined( __ICC ) ) && defined( __i386 ) + __asm__ __volatile__ ( +" leal %0, %%eax\n" +" movl %%esp, (%%eax)\n" /* save esp, ebp */ +" movl %%ebp, 4(%%eax)\n" +" movl %%eax, %%esp\n" +" movl 8(%%esp), %%esi\n" /* esi = in */ +" movl 16(%%esp), %%edi\n" /* edi = out */ +" movl 40(%%esp), %%edx\n" /* edx = hold */ +" movl 44(%%esp), %%ebx\n" /* ebx = bits */ +" movl 32(%%esp), %%ebp\n" /* ebp = lcode */ + +" cld\n" +" jmp .L_do_loop\n" + +".align 32,0x90\n" +".L_while_test:\n" +" cmpl %%edi, 24(%%esp)\n" /* out < end */ +" jbe .L_break_loop\n" +" cmpl %%esi, 12(%%esp)\n" /* in < last */ +" jbe .L_break_loop\n" + +".L_do_loop:\n" +" cmpb $15, %%bl\n" +" ja .L_get_length_code\n" /* if (15 < bits) */ + +" xorl %%eax, %%eax\n" +" lodsw\n" /* al = *(ushort *)in++ */ +" movb %%bl, %%cl\n" /* cl = bits, needs it for shifting */ +" addb $16, %%bl\n" /* bits += 16 */ +" shll %%cl, %%eax\n" +" orl %%eax, %%edx\n" /* hold |= *((ushort *)in)++ << bits */ + +".L_get_length_code:\n" +" movl 56(%%esp), %%eax\n" /* eax = lmask */ +" andl %%edx, %%eax\n" /* eax &= hold */ +" movl (%%ebp,%%eax,4), %%eax\n" /* eax = lcode[hold & lmask] */ + +".L_dolen:\n" +" movb %%ah, %%cl\n" /* cl = this.bits */ +" subb %%ah, %%bl\n" /* bits -= this.bits */ +" shrl %%cl, %%edx\n" /* hold >>= this.bits */ + +" testb %%al, %%al\n" +" jnz .L_test_for_length_base\n" /* if (op != 0) 45.7% */ + +" shrl $16, %%eax\n" /* output this.val char */ +" stosb\n" +" jmp .L_while_test\n" + +".align 32,0x90\n" +".L_test_for_length_base:\n" +" movl %%eax, %%ecx\n" /* len = this */ +" shrl $16, %%ecx\n" /* len = this.val */ +" movl %%ecx, 64(%%esp)\n" /* save len */ +" movb %%al, %%cl\n" + +" testb $16, %%al\n" +" jz .L_test_for_second_level_length\n" /* if ((op & 16) == 0) 8% */ +" andb $15, %%cl\n" /* op &= 15 */ +" jz .L_decode_distance\n" /* if (!op) */ +" cmpb %%cl, %%bl\n" +" jae .L_add_bits_to_len\n" /* if (op <= bits) */ + +" movb %%cl, %%ch\n" /* stash op in ch, freeing cl */ +" xorl %%eax, %%eax\n" +" lodsw\n" /* al = *(ushort *)in++ */ +" movb %%bl, %%cl\n" /* cl = bits, needs it for shifting */ +" addb $16, %%bl\n" /* bits += 16 */ +" shll %%cl, %%eax\n" +" orl %%eax, %%edx\n" /* hold |= *((ushort *)in)++ << bits */ +" movb %%ch, %%cl\n" /* move op back to ecx */ + +".L_add_bits_to_len:\n" +" subb %%cl, %%bl\n" +" xorl %%eax, %%eax\n" +" incl %%eax\n" +" shll %%cl, %%eax\n" +" decl %%eax\n" +" andl %%edx, %%eax\n" /* eax &= hold */ +" shrl %%cl, %%edx\n" +" addl %%eax, 64(%%esp)\n" /* len += hold & mask[op] */ + +".L_decode_distance:\n" +" cmpb $15, %%bl\n" +" ja .L_get_distance_code\n" /* if (15 < bits) */ + +" xorl %%eax, %%eax\n" +" lodsw\n" /* al = *(ushort *)in++ */ +" movb %%bl, %%cl\n" /* cl = bits, needs it for shifting */ +" addb $16, %%bl\n" /* bits += 16 */ +" shll %%cl, %%eax\n" +" orl %%eax, %%edx\n" /* hold |= *((ushort *)in)++ << bits */ + +".L_get_distance_code:\n" +" movl 60(%%esp), %%eax\n" /* eax = dmask */ +" movl 36(%%esp), %%ecx\n" /* ecx = dcode */ +" andl %%edx, %%eax\n" /* eax &= hold */ +" movl (%%ecx,%%eax,4), %%eax\n"/* eax = dcode[hold & dmask] */ + +".L_dodist:\n" +" movl %%eax, %%ebp\n" /* dist = this */ +" shrl $16, %%ebp\n" /* dist = this.val */ +" movb %%ah, %%cl\n" +" subb %%ah, %%bl\n" /* bits -= this.bits */ +" shrl %%cl, %%edx\n" /* hold >>= this.bits */ +" movb %%al, %%cl\n" /* cl = this.op */ + +" testb $16, %%al\n" /* if ((op & 16) == 0) */ +" jz .L_test_for_second_level_dist\n" +" andb $15, %%cl\n" /* op &= 15 */ +" jz .L_check_dist_one\n" +" cmpb %%cl, %%bl\n" +" jae .L_add_bits_to_dist\n" /* if (op <= bits) 97.6% */ + +" movb %%cl, %%ch\n" /* stash op in ch, freeing cl */ +" xorl %%eax, %%eax\n" +" lodsw\n" /* al = *(ushort *)in++ */ +" movb %%bl, %%cl\n" /* cl = bits, needs it for shifting */ +" addb $16, %%bl\n" /* bits += 16 */ +" shll %%cl, %%eax\n" +" orl %%eax, %%edx\n" /* hold |= *((ushort *)in)++ << bits */ +" movb %%ch, %%cl\n" /* move op back to ecx */ + +".L_add_bits_to_dist:\n" +" subb %%cl, %%bl\n" +" xorl %%eax, %%eax\n" +" incl %%eax\n" +" shll %%cl, %%eax\n" +" decl %%eax\n" /* (1 << op) - 1 */ +" andl %%edx, %%eax\n" /* eax &= hold */ +" shrl %%cl, %%edx\n" +" addl %%eax, %%ebp\n" /* dist += hold & ((1 << op) - 1) */ + +".L_check_window:\n" +" movl %%esi, 8(%%esp)\n" /* save in so from can use it's reg */ +" movl %%edi, %%eax\n" +" subl 20(%%esp), %%eax\n" /* nbytes = out - beg */ + +" cmpl %%ebp, %%eax\n" +" jb .L_clip_window\n" /* if (dist > nbytes) 4.2% */ + +" movl 64(%%esp), %%ecx\n" /* ecx = len */ +" movl %%edi, %%esi\n" +" subl %%ebp, %%esi\n" /* from = out - dist */ + +" sarl %%ecx\n" +" jnc .L_copy_two\n" /* if len % 2 == 0 */ + +" rep movsw\n" +" movb (%%esi), %%al\n" +" movb %%al, (%%edi)\n" +" incl %%edi\n" + +" movl 8(%%esp), %%esi\n" /* move in back to %esi, toss from */ +" movl 32(%%esp), %%ebp\n" /* ebp = lcode */ +" jmp .L_while_test\n" + +".L_copy_two:\n" +" rep movsw\n" +" movl 8(%%esp), %%esi\n" /* move in back to %esi, toss from */ +" movl 32(%%esp), %%ebp\n" /* ebp = lcode */ +" jmp .L_while_test\n" + +".align 32,0x90\n" +".L_check_dist_one:\n" +" cmpl $1, %%ebp\n" /* if dist 1, is a memset */ +" jne .L_check_window\n" +" cmpl %%edi, 20(%%esp)\n" +" je .L_check_window\n" /* out == beg, if outside window */ + +" movl 64(%%esp), %%ecx\n" /* ecx = len */ +" movb -1(%%edi), %%al\n" +" movb %%al, %%ah\n" + +" sarl %%ecx\n" +" jnc .L_set_two\n" +" movb %%al, (%%edi)\n" +" incl %%edi\n" + +".L_set_two:\n" +" rep stosw\n" +" movl 32(%%esp), %%ebp\n" /* ebp = lcode */ +" jmp .L_while_test\n" + +".align 32,0x90\n" +".L_test_for_second_level_length:\n" +" testb $64, %%al\n" +" jnz .L_test_for_end_of_block\n" /* if ((op & 64) != 0) */ + +" xorl %%eax, %%eax\n" +" incl %%eax\n" +" shll %%cl, %%eax\n" +" decl %%eax\n" +" andl %%edx, %%eax\n" /* eax &= hold */ +" addl 64(%%esp), %%eax\n" /* eax += len */ +" movl (%%ebp,%%eax,4), %%eax\n" /* eax = lcode[val+(hold&mask[op])]*/ +" jmp .L_dolen\n" + +".align 32,0x90\n" +".L_test_for_second_level_dist:\n" +" testb $64, %%al\n" +" jnz .L_invalid_distance_code\n" /* if ((op & 64) != 0) */ + +" xorl %%eax, %%eax\n" +" incl %%eax\n" +" shll %%cl, %%eax\n" +" decl %%eax\n" +" andl %%edx, %%eax\n" /* eax &= hold */ +" addl %%ebp, %%eax\n" /* eax += dist */ +" movl 36(%%esp), %%ecx\n" /* ecx = dcode */ +" movl (%%ecx,%%eax,4), %%eax\n" /* eax = dcode[val+(hold&mask[op])]*/ +" jmp .L_dodist\n" + +".align 32,0x90\n" +".L_clip_window:\n" +" movl %%eax, %%ecx\n" +" movl 48(%%esp), %%eax\n" /* eax = wsize */ +" negl %%ecx\n" /* nbytes = -nbytes */ +" movl 28(%%esp), %%esi\n" /* from = window */ + +" cmpl %%ebp, %%eax\n" +" jb .L_invalid_distance_too_far\n" /* if (dist > wsize) */ + +" addl %%ebp, %%ecx\n" /* nbytes = dist - nbytes */ +" cmpl $0, 52(%%esp)\n" +" jne .L_wrap_around_window\n" /* if (write != 0) */ + +" subl %%ecx, %%eax\n" +" addl %%eax, %%esi\n" /* from += wsize - nbytes */ + +" movl 64(%%esp), %%eax\n" /* eax = len */ +" cmpl %%ecx, %%eax\n" +" jbe .L_do_copy\n" /* if (nbytes >= len) */ + +" subl %%ecx, %%eax\n" /* len -= nbytes */ +" rep movsb\n" +" movl %%edi, %%esi\n" +" subl %%ebp, %%esi\n" /* from = out - dist */ +" jmp .L_do_copy\n" + +".align 32,0x90\n" +".L_wrap_around_window:\n" +" movl 52(%%esp), %%eax\n" /* eax = write */ +" cmpl %%eax, %%ecx\n" +" jbe .L_contiguous_in_window\n" /* if (write >= nbytes) */ + +" addl 48(%%esp), %%esi\n" /* from += wsize */ +" addl %%eax, %%esi\n" /* from += write */ +" subl %%ecx, %%esi\n" /* from -= nbytes */ +" subl %%eax, %%ecx\n" /* nbytes -= write */ + +" movl 64(%%esp), %%eax\n" /* eax = len */ +" cmpl %%ecx, %%eax\n" +" jbe .L_do_copy\n" /* if (nbytes >= len) */ + +" subl %%ecx, %%eax\n" /* len -= nbytes */ +" rep movsb\n" +" movl 28(%%esp), %%esi\n" /* from = window */ +" movl 52(%%esp), %%ecx\n" /* nbytes = write */ +" cmpl %%ecx, %%eax\n" +" jbe .L_do_copy\n" /* if (nbytes >= len) */ + +" subl %%ecx, %%eax\n" /* len -= nbytes */ +" rep movsb\n" +" movl %%edi, %%esi\n" +" subl %%ebp, %%esi\n" /* from = out - dist */ +" jmp .L_do_copy\n" + +".align 32,0x90\n" +".L_contiguous_in_window:\n" +" addl %%eax, %%esi\n" +" subl %%ecx, %%esi\n" /* from += write - nbytes */ + +" movl 64(%%esp), %%eax\n" /* eax = len */ +" cmpl %%ecx, %%eax\n" +" jbe .L_do_copy\n" /* if (nbytes >= len) */ + +" subl %%ecx, %%eax\n" /* len -= nbytes */ +" rep movsb\n" +" movl %%edi, %%esi\n" +" subl %%ebp, %%esi\n" /* from = out - dist */ +" jmp .L_do_copy\n" /* if (nbytes >= len) */ + +".align 32,0x90\n" +".L_do_copy:\n" +" movl %%eax, %%ecx\n" +" rep movsb\n" + +" movl 8(%%esp), %%esi\n" /* move in back to %esi, toss from */ +" movl 32(%%esp), %%ebp\n" /* ebp = lcode */ +" jmp .L_while_test\n" + +".L_test_for_end_of_block:\n" +" testb $32, %%al\n" +" jz .L_invalid_literal_length_code\n" +" movl $1, 72(%%esp)\n" +" jmp .L_break_loop_with_status\n" + +".L_invalid_literal_length_code:\n" +" movl $2, 72(%%esp)\n" +" jmp .L_break_loop_with_status\n" + +".L_invalid_distance_code:\n" +" movl $3, 72(%%esp)\n" +" jmp .L_break_loop_with_status\n" + +".L_invalid_distance_too_far:\n" +" movl 8(%%esp), %%esi\n" +" movl $4, 72(%%esp)\n" +" jmp .L_break_loop_with_status\n" + +".L_break_loop:\n" +" movl $0, 72(%%esp)\n" + +".L_break_loop_with_status:\n" +/* put in, out, bits, and hold back into ar and pop esp */ +" movl %%esi, 8(%%esp)\n" /* save in */ +" movl %%edi, 16(%%esp)\n" /* save out */ +" movl %%ebx, 44(%%esp)\n" /* save bits */ +" movl %%edx, 40(%%esp)\n" /* save hold */ +" movl 4(%%esp), %%ebp\n" /* restore esp, ebp */ +" movl (%%esp), %%esp\n" + : + : "m" (ar) + : "memory", "%eax", "%ebx", "%ecx", "%edx", "%esi", "%edi" + ); +#elif defined( _MSC_VER ) && ! defined( _M_AMD64 ) + __asm { + lea eax, ar + mov [eax], esp /* save esp, ebp */ + mov [eax+4], ebp + mov esp, eax + mov esi, [esp+8] /* esi = in */ + mov edi, [esp+16] /* edi = out */ + mov edx, [esp+40] /* edx = hold */ + mov ebx, [esp+44] /* ebx = bits */ + mov ebp, [esp+32] /* ebp = lcode */ + + cld + jmp L_do_loop + +ALIGN 4 +L_while_test: + cmp [esp+24], edi + jbe L_break_loop + cmp [esp+12], esi + jbe L_break_loop + +L_do_loop: + cmp bl, 15 + ja L_get_length_code /* if (15 < bits) */ + + xor eax, eax + lodsw /* al = *(ushort *)in++ */ + mov cl, bl /* cl = bits, needs it for shifting */ + add bl, 16 /* bits += 16 */ + shl eax, cl + or edx, eax /* hold |= *((ushort *)in)++ << bits */ + +L_get_length_code: + mov eax, [esp+56] /* eax = lmask */ + and eax, edx /* eax &= hold */ + mov eax, [ebp+eax*4] /* eax = lcode[hold & lmask] */ + +L_dolen: + mov cl, ah /* cl = this.bits */ + sub bl, ah /* bits -= this.bits */ + shr edx, cl /* hold >>= this.bits */ + + test al, al + jnz L_test_for_length_base /* if (op != 0) 45.7% */ + + shr eax, 16 /* output this.val char */ + stosb + jmp L_while_test + +ALIGN 4 +L_test_for_length_base: + mov ecx, eax /* len = this */ + shr ecx, 16 /* len = this.val */ + mov [esp+64], ecx /* save len */ + mov cl, al + + test al, 16 + jz L_test_for_second_level_length /* if ((op & 16) == 0) 8% */ + and cl, 15 /* op &= 15 */ + jz L_decode_distance /* if (!op) */ + cmp bl, cl + jae L_add_bits_to_len /* if (op <= bits) */ + + mov ch, cl /* stash op in ch, freeing cl */ + xor eax, eax + lodsw /* al = *(ushort *)in++ */ + mov cl, bl /* cl = bits, needs it for shifting */ + add bl, 16 /* bits += 16 */ + shl eax, cl + or edx, eax /* hold |= *((ushort *)in)++ << bits */ + mov cl, ch /* move op back to ecx */ + +L_add_bits_to_len: + sub bl, cl + xor eax, eax + inc eax + shl eax, cl + dec eax + and eax, edx /* eax &= hold */ + shr edx, cl + add [esp+64], eax /* len += hold & mask[op] */ + +L_decode_distance: + cmp bl, 15 + ja L_get_distance_code /* if (15 < bits) */ + + xor eax, eax + lodsw /* al = *(ushort *)in++ */ + mov cl, bl /* cl = bits, needs it for shifting */ + add bl, 16 /* bits += 16 */ + shl eax, cl + or edx, eax /* hold |= *((ushort *)in)++ << bits */ + +L_get_distance_code: + mov eax, [esp+60] /* eax = dmask */ + mov ecx, [esp+36] /* ecx = dcode */ + and eax, edx /* eax &= hold */ + mov eax, [ecx+eax*4]/* eax = dcode[hold & dmask] */ + +L_dodist: + mov ebp, eax /* dist = this */ + shr ebp, 16 /* dist = this.val */ + mov cl, ah + sub bl, ah /* bits -= this.bits */ + shr edx, cl /* hold >>= this.bits */ + mov cl, al /* cl = this.op */ + + test al, 16 /* if ((op & 16) == 0) */ + jz L_test_for_second_level_dist + and cl, 15 /* op &= 15 */ + jz L_check_dist_one + cmp bl, cl + jae L_add_bits_to_dist /* if (op <= bits) 97.6% */ + + mov ch, cl /* stash op in ch, freeing cl */ + xor eax, eax + lodsw /* al = *(ushort *)in++ */ + mov cl, bl /* cl = bits, needs it for shifting */ + add bl, 16 /* bits += 16 */ + shl eax, cl + or edx, eax /* hold |= *((ushort *)in)++ << bits */ + mov cl, ch /* move op back to ecx */ + +L_add_bits_to_dist: + sub bl, cl + xor eax, eax + inc eax + shl eax, cl + dec eax /* (1 << op) - 1 */ + and eax, edx /* eax &= hold */ + shr edx, cl + add ebp, eax /* dist += hold & ((1 << op) - 1) */ + +L_check_window: + mov [esp+8], esi /* save in so from can use it's reg */ + mov eax, edi + sub eax, [esp+20] /* nbytes = out - beg */ + + cmp eax, ebp + jb L_clip_window /* if (dist > nbytes) 4.2% */ + + mov ecx, [esp+64] /* ecx = len */ + mov esi, edi + sub esi, ebp /* from = out - dist */ + + sar ecx, 1 + jnc L_copy_two + + rep movsw + mov al, [esi] + mov [edi], al + inc edi + + mov esi, [esp+8] /* move in back to %esi, toss from */ + mov ebp, [esp+32] /* ebp = lcode */ + jmp L_while_test + +L_copy_two: + rep movsw + mov esi, [esp+8] /* move in back to %esi, toss from */ + mov ebp, [esp+32] /* ebp = lcode */ + jmp L_while_test + +ALIGN 4 +L_check_dist_one: + cmp ebp, 1 /* if dist 1, is a memset */ + jne L_check_window + cmp [esp+20], edi + je L_check_window /* out == beg, if outside window */ + + mov ecx, [esp+64] /* ecx = len */ + mov al, [edi-1] + mov ah, al + + sar ecx, 1 + jnc L_set_two + mov [edi], al /* memset out with from[-1] */ + inc edi + +L_set_two: + rep stosw + mov ebp, [esp+32] /* ebp = lcode */ + jmp L_while_test + +ALIGN 4 +L_test_for_second_level_length: + test al, 64 + jnz L_test_for_end_of_block /* if ((op & 64) != 0) */ + + xor eax, eax + inc eax + shl eax, cl + dec eax + and eax, edx /* eax &= hold */ + add eax, [esp+64] /* eax += len */ + mov eax, [ebp+eax*4] /* eax = lcode[val+(hold&mask[op])]*/ + jmp L_dolen + +ALIGN 4 +L_test_for_second_level_dist: + test al, 64 + jnz L_invalid_distance_code /* if ((op & 64) != 0) */ + + xor eax, eax + inc eax + shl eax, cl + dec eax + and eax, edx /* eax &= hold */ + add eax, ebp /* eax += dist */ + mov ecx, [esp+36] /* ecx = dcode */ + mov eax, [ecx+eax*4] /* eax = dcode[val+(hold&mask[op])]*/ + jmp L_dodist + +ALIGN 4 +L_clip_window: + mov ecx, eax + mov eax, [esp+48] /* eax = wsize */ + neg ecx /* nbytes = -nbytes */ + mov esi, [esp+28] /* from = window */ + + cmp eax, ebp + jb L_invalid_distance_too_far /* if (dist > wsize) */ + + add ecx, ebp /* nbytes = dist - nbytes */ + cmp dword ptr [esp+52], 0 + jne L_wrap_around_window /* if (write != 0) */ + + sub eax, ecx + add esi, eax /* from += wsize - nbytes */ + + mov eax, [esp+64] /* eax = len */ + cmp eax, ecx + jbe L_do_copy /* if (nbytes >= len) */ + + sub eax, ecx /* len -= nbytes */ + rep movsb + mov esi, edi + sub esi, ebp /* from = out - dist */ + jmp L_do_copy + +ALIGN 4 +L_wrap_around_window: + mov eax, [esp+52] /* eax = write */ + cmp ecx, eax + jbe L_contiguous_in_window /* if (write >= nbytes) */ + + add esi, [esp+48] /* from += wsize */ + add esi, eax /* from += write */ + sub esi, ecx /* from -= nbytes */ + sub ecx, eax /* nbytes -= write */ + + mov eax, [esp+64] /* eax = len */ + cmp eax, ecx + jbe L_do_copy /* if (nbytes >= len) */ + + sub eax, ecx /* len -= nbytes */ + rep movsb + mov esi, [esp+28] /* from = window */ + mov ecx, [esp+52] /* nbytes = write */ + cmp eax, ecx + jbe L_do_copy /* if (nbytes >= len) */ + + sub eax, ecx /* len -= nbytes */ + rep movsb + mov esi, edi + sub esi, ebp /* from = out - dist */ + jmp L_do_copy + +ALIGN 4 +L_contiguous_in_window: + add esi, eax + sub esi, ecx /* from += write - nbytes */ + + mov eax, [esp+64] /* eax = len */ + cmp eax, ecx + jbe L_do_copy /* if (nbytes >= len) */ + + sub eax, ecx /* len -= nbytes */ + rep movsb + mov esi, edi + sub esi, ebp /* from = out - dist */ + jmp L_do_copy + +ALIGN 4 +L_do_copy: + mov ecx, eax + rep movsb + + mov esi, [esp+8] /* move in back to %esi, toss from */ + mov ebp, [esp+32] /* ebp = lcode */ + jmp L_while_test + +L_test_for_end_of_block: + test al, 32 + jz L_invalid_literal_length_code + mov dword ptr [esp+72], 1 + jmp L_break_loop_with_status + +L_invalid_literal_length_code: + mov dword ptr [esp+72], 2 + jmp L_break_loop_with_status + +L_invalid_distance_code: + mov dword ptr [esp+72], 3 + jmp L_break_loop_with_status + +L_invalid_distance_too_far: + mov esi, [esp+4] + mov dword ptr [esp+72], 4 + jmp L_break_loop_with_status + +L_break_loop: + mov dword ptr [esp+72], 0 + +L_break_loop_with_status: +/* put in, out, bits, and hold back into ar and pop esp */ + mov [esp+8], esi /* save in */ + mov [esp+16], edi /* save out */ + mov [esp+44], ebx /* save bits */ + mov [esp+40], edx /* save hold */ + mov ebp, [esp+4] /* restore esp, ebp */ + mov esp, [esp] + } +#else +#error "x86 architecture not defined" +#endif + + if (ar.status > 1) { + if (ar.status == 2) + strm->msg = "invalid literal/length code"; + else if (ar.status == 3) + strm->msg = "invalid distance code"; + else + strm->msg = "invalid distance too far back"; + state->mode = BAD; + } + else if ( ar.status == 1 ) { + state->mode = TYPE; + } + + /* return unused bytes (on entry, bits < 8, so in won't go too far back) */ + ar.len = ar.bits >> 3; + ar.in -= ar.len; + ar.bits -= ar.len << 3; + ar.hold &= (1U << ar.bits) - 1; + + /* update state and return */ + strm->next_in = ar.in; + strm->next_out = ar.out; + strm->avail_in = (unsigned)(ar.in < ar.last ? + PAD_AVAIL_IN + (ar.last - ar.in) : + PAD_AVAIL_IN - (ar.in - ar.last)); + strm->avail_out = (unsigned)(ar.out < ar.end ? + PAD_AVAIL_OUT + (ar.end - ar.out) : + PAD_AVAIL_OUT - (ar.out - ar.end)); + state->hold = ar.hold; + state->bits = ar.bits; + return; +} + diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/inflate86/inffast.S b/software/scsi2sd-util/zlib-1.2.8/contrib/inflate86/inffast.S new file mode 100644 index 0000000..2245a29 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/inflate86/inffast.S @@ -0,0 +1,1368 @@ +/* + * inffast.S is a hand tuned assembler version of: + * + * inffast.c -- fast decoding + * Copyright (C) 1995-2003 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + * + * Copyright (C) 2003 Chris Anderson + * Please use the copyright conditions above. + * + * This version (Jan-23-2003) of inflate_fast was coded and tested under + * GNU/Linux on a pentium 3, using the gcc-3.2 compiler distribution. On that + * machine, I found that gzip style archives decompressed about 20% faster than + * the gcc-3.2 -O3 -fomit-frame-pointer compiled version. Your results will + * depend on how large of a buffer is used for z_stream.next_in & next_out + * (8K-32K worked best for my 256K cpu cache) and how much overhead there is in + * stream processing I/O and crc32/addler32. In my case, this routine used + * 70% of the cpu time and crc32 used 20%. + * + * I am confident that this version will work in the general case, but I have + * not tested a wide variety of datasets or a wide variety of platforms. + * + * Jan-24-2003 -- Added -DUSE_MMX define for slightly faster inflating. + * It should be a runtime flag instead of compile time flag... + * + * Jan-26-2003 -- Added runtime check for MMX support with cpuid instruction. + * With -DUSE_MMX, only MMX code is compiled. With -DNO_MMX, only non-MMX code + * is compiled. Without either option, runtime detection is enabled. Runtime + * detection should work on all modern cpus and the recomended algorithm (flip + * ID bit on eflags and then use the cpuid instruction) is used in many + * multimedia applications. Tested under win2k with gcc-2.95 and gas-2.12 + * distributed with cygwin3. Compiling with gcc-2.95 -c inffast.S -o + * inffast.obj generates a COFF object which can then be linked with MSVC++ + * compiled code. Tested under FreeBSD 4.7 with gcc-2.95. + * + * Jan-28-2003 -- Tested Athlon XP... MMX mode is slower than no MMX (and + * slower than compiler generated code). Adjusted cpuid check to use the MMX + * code only for Pentiums < P4 until I have more data on the P4. Speed + * improvment is only about 15% on the Athlon when compared with code generated + * with MSVC++. Not sure yet, but I think the P4 will also be slower using the + * MMX mode because many of it's x86 ALU instructions execute in .5 cycles and + * have less latency than MMX ops. Added code to buffer the last 11 bytes of + * the input stream since the MMX code grabs bits in chunks of 32, which + * differs from the inffast.c algorithm. I don't think there would have been + * read overruns where a page boundary was crossed (a segfault), but there + * could have been overruns when next_in ends on unaligned memory (unintialized + * memory read). + * + * Mar-13-2003 -- P4 MMX is slightly slower than P4 NO_MMX. I created a C + * version of the non-MMX code so that it doesn't depend on zstrm and zstate + * structure offsets which are hard coded in this file. This was last tested + * with zlib-1.2.0 which is currently in beta testing, newer versions of this + * and inffas86.c can be found at http://www.eetbeetee.com/zlib/ and + * http://www.charm.net/~christop/zlib/ + */ + + +/* + * if you have underscore linking problems (_inflate_fast undefined), try + * using -DGAS_COFF + */ +#if ! defined( GAS_COFF ) && ! defined( GAS_ELF ) + +#if defined( WIN32 ) || defined( __CYGWIN__ ) +#define GAS_COFF /* windows object format */ +#else +#define GAS_ELF +#endif + +#endif /* ! GAS_COFF && ! GAS_ELF */ + + +#if defined( GAS_COFF ) + +/* coff externals have underscores */ +#define inflate_fast _inflate_fast +#define inflate_fast_use_mmx _inflate_fast_use_mmx + +#endif /* GAS_COFF */ + + +.file "inffast.S" + +.globl inflate_fast + +.text +.align 4,0 +.L_invalid_literal_length_code_msg: +.string "invalid literal/length code" + +.align 4,0 +.L_invalid_distance_code_msg: +.string "invalid distance code" + +.align 4,0 +.L_invalid_distance_too_far_msg: +.string "invalid distance too far back" + +#if ! defined( NO_MMX ) +.align 4,0 +.L_mask: /* mask[N] = ( 1 << N ) - 1 */ +.long 0 +.long 1 +.long 3 +.long 7 +.long 15 +.long 31 +.long 63 +.long 127 +.long 255 +.long 511 +.long 1023 +.long 2047 +.long 4095 +.long 8191 +.long 16383 +.long 32767 +.long 65535 +.long 131071 +.long 262143 +.long 524287 +.long 1048575 +.long 2097151 +.long 4194303 +.long 8388607 +.long 16777215 +.long 33554431 +.long 67108863 +.long 134217727 +.long 268435455 +.long 536870911 +.long 1073741823 +.long 2147483647 +.long 4294967295 +#endif /* NO_MMX */ + +.text + +/* + * struct z_stream offsets, in zlib.h + */ +#define next_in_strm 0 /* strm->next_in */ +#define avail_in_strm 4 /* strm->avail_in */ +#define next_out_strm 12 /* strm->next_out */ +#define avail_out_strm 16 /* strm->avail_out */ +#define msg_strm 24 /* strm->msg */ +#define state_strm 28 /* strm->state */ + +/* + * struct inflate_state offsets, in inflate.h + */ +#define mode_state 0 /* state->mode */ +#define wsize_state 32 /* state->wsize */ +#define write_state 40 /* state->write */ +#define window_state 44 /* state->window */ +#define hold_state 48 /* state->hold */ +#define bits_state 52 /* state->bits */ +#define lencode_state 68 /* state->lencode */ +#define distcode_state 72 /* state->distcode */ +#define lenbits_state 76 /* state->lenbits */ +#define distbits_state 80 /* state->distbits */ + +/* + * inflate_fast's activation record + */ +#define local_var_size 64 /* how much local space for vars */ +#define strm_sp 88 /* first arg: z_stream * (local_var_size + 24) */ +#define start_sp 92 /* second arg: unsigned int (local_var_size + 28) */ + +/* + * offsets for local vars on stack + */ +#define out 60 /* unsigned char* */ +#define window 56 /* unsigned char* */ +#define wsize 52 /* unsigned int */ +#define write 48 /* unsigned int */ +#define in 44 /* unsigned char* */ +#define beg 40 /* unsigned char* */ +#define buf 28 /* char[ 12 ] */ +#define len 24 /* unsigned int */ +#define last 20 /* unsigned char* */ +#define end 16 /* unsigned char* */ +#define dcode 12 /* code* */ +#define lcode 8 /* code* */ +#define dmask 4 /* unsigned int */ +#define lmask 0 /* unsigned int */ + +/* + * typedef enum inflate_mode consts, in inflate.h + */ +#define INFLATE_MODE_TYPE 11 /* state->mode flags enum-ed in inflate.h */ +#define INFLATE_MODE_BAD 26 + + +#if ! defined( USE_MMX ) && ! defined( NO_MMX ) + +#define RUN_TIME_MMX + +#define CHECK_MMX 1 +#define DO_USE_MMX 2 +#define DONT_USE_MMX 3 + +.globl inflate_fast_use_mmx + +.data + +.align 4,0 +inflate_fast_use_mmx: /* integer flag for run time control 1=check,2=mmx,3=no */ +.long CHECK_MMX + +#if defined( GAS_ELF ) +/* elf info */ +.type inflate_fast_use_mmx,@object +.size inflate_fast_use_mmx,4 +#endif + +#endif /* RUN_TIME_MMX */ + +#if defined( GAS_COFF ) +/* coff info: scl 2 = extern, type 32 = function */ +.def inflate_fast; .scl 2; .type 32; .endef +#endif + +.text + +.align 32,0x90 +inflate_fast: + pushl %edi + pushl %esi + pushl %ebp + pushl %ebx + pushf /* save eflags (strm_sp, state_sp assumes this is 32 bits) */ + subl $local_var_size, %esp + cld + +#define strm_r %esi +#define state_r %edi + + movl strm_sp(%esp), strm_r + movl state_strm(strm_r), state_r + + /* in = strm->next_in; + * out = strm->next_out; + * last = in + strm->avail_in - 11; + * beg = out - (start - strm->avail_out); + * end = out + (strm->avail_out - 257); + */ + movl avail_in_strm(strm_r), %edx + movl next_in_strm(strm_r), %eax + + addl %eax, %edx /* avail_in += next_in */ + subl $11, %edx /* avail_in -= 11 */ + + movl %eax, in(%esp) + movl %edx, last(%esp) + + movl start_sp(%esp), %ebp + movl avail_out_strm(strm_r), %ecx + movl next_out_strm(strm_r), %ebx + + subl %ecx, %ebp /* start -= avail_out */ + negl %ebp /* start = -start */ + addl %ebx, %ebp /* start += next_out */ + + subl $257, %ecx /* avail_out -= 257 */ + addl %ebx, %ecx /* avail_out += out */ + + movl %ebx, out(%esp) + movl %ebp, beg(%esp) + movl %ecx, end(%esp) + + /* wsize = state->wsize; + * write = state->write; + * window = state->window; + * hold = state->hold; + * bits = state->bits; + * lcode = state->lencode; + * dcode = state->distcode; + * lmask = ( 1 << state->lenbits ) - 1; + * dmask = ( 1 << state->distbits ) - 1; + */ + + movl lencode_state(state_r), %eax + movl distcode_state(state_r), %ecx + + movl %eax, lcode(%esp) + movl %ecx, dcode(%esp) + + movl $1, %eax + movl lenbits_state(state_r), %ecx + shll %cl, %eax + decl %eax + movl %eax, lmask(%esp) + + movl $1, %eax + movl distbits_state(state_r), %ecx + shll %cl, %eax + decl %eax + movl %eax, dmask(%esp) + + movl wsize_state(state_r), %eax + movl write_state(state_r), %ecx + movl window_state(state_r), %edx + + movl %eax, wsize(%esp) + movl %ecx, write(%esp) + movl %edx, window(%esp) + + movl hold_state(state_r), %ebp + movl bits_state(state_r), %ebx + +#undef strm_r +#undef state_r + +#define in_r %esi +#define from_r %esi +#define out_r %edi + + movl in(%esp), in_r + movl last(%esp), %ecx + cmpl in_r, %ecx + ja .L_align_long /* if in < last */ + + addl $11, %ecx /* ecx = &in[ avail_in ] */ + subl in_r, %ecx /* ecx = avail_in */ + movl $12, %eax + subl %ecx, %eax /* eax = 12 - avail_in */ + leal buf(%esp), %edi + rep movsb /* memcpy( buf, in, avail_in ) */ + movl %eax, %ecx + xorl %eax, %eax + rep stosb /* memset( &buf[ avail_in ], 0, 12 - avail_in ) */ + leal buf(%esp), in_r /* in = buf */ + movl in_r, last(%esp) /* last = in, do just one iteration */ + jmp .L_is_aligned + + /* align in_r on long boundary */ +.L_align_long: + testl $3, in_r + jz .L_is_aligned + xorl %eax, %eax + movb (in_r), %al + incl in_r + movl %ebx, %ecx + addl $8, %ebx + shll %cl, %eax + orl %eax, %ebp + jmp .L_align_long + +.L_is_aligned: + movl out(%esp), out_r + +#if defined( NO_MMX ) + jmp .L_do_loop +#endif + +#if defined( USE_MMX ) + jmp .L_init_mmx +#endif + +/*** Runtime MMX check ***/ + +#if defined( RUN_TIME_MMX ) +.L_check_mmx: + cmpl $DO_USE_MMX, inflate_fast_use_mmx + je .L_init_mmx + ja .L_do_loop /* > 2 */ + + pushl %eax + pushl %ebx + pushl %ecx + pushl %edx + pushf + movl (%esp), %eax /* copy eflags to eax */ + xorl $0x200000, (%esp) /* try toggling ID bit of eflags (bit 21) + * to see if cpu supports cpuid... + * ID bit method not supported by NexGen but + * bios may load a cpuid instruction and + * cpuid may be disabled on Cyrix 5-6x86 */ + popf + pushf + popl %edx /* copy new eflags to edx */ + xorl %eax, %edx /* test if ID bit is flipped */ + jz .L_dont_use_mmx /* not flipped if zero */ + xorl %eax, %eax + cpuid + cmpl $0x756e6547, %ebx /* check for GenuineIntel in ebx,ecx,edx */ + jne .L_dont_use_mmx + cmpl $0x6c65746e, %ecx + jne .L_dont_use_mmx + cmpl $0x49656e69, %edx + jne .L_dont_use_mmx + movl $1, %eax + cpuid /* get cpu features */ + shrl $8, %eax + andl $15, %eax + cmpl $6, %eax /* check for Pentium family, is 0xf for P4 */ + jne .L_dont_use_mmx + testl $0x800000, %edx /* test if MMX feature is set (bit 23) */ + jnz .L_use_mmx + jmp .L_dont_use_mmx +.L_use_mmx: + movl $DO_USE_MMX, inflate_fast_use_mmx + jmp .L_check_mmx_pop +.L_dont_use_mmx: + movl $DONT_USE_MMX, inflate_fast_use_mmx +.L_check_mmx_pop: + popl %edx + popl %ecx + popl %ebx + popl %eax + jmp .L_check_mmx +#endif + + +/*** Non-MMX code ***/ + +#if defined ( NO_MMX ) || defined( RUN_TIME_MMX ) + +#define hold_r %ebp +#define bits_r %bl +#define bitslong_r %ebx + +.align 32,0x90 +.L_while_test: + /* while (in < last && out < end) + */ + cmpl out_r, end(%esp) + jbe .L_break_loop /* if (out >= end) */ + + cmpl in_r, last(%esp) + jbe .L_break_loop + +.L_do_loop: + /* regs: %esi = in, %ebp = hold, %bl = bits, %edi = out + * + * do { + * if (bits < 15) { + * hold |= *((unsigned short *)in)++ << bits; + * bits += 16 + * } + * this = lcode[hold & lmask] + */ + cmpb $15, bits_r + ja .L_get_length_code /* if (15 < bits) */ + + xorl %eax, %eax + lodsw /* al = *(ushort *)in++ */ + movb bits_r, %cl /* cl = bits, needs it for shifting */ + addb $16, bits_r /* bits += 16 */ + shll %cl, %eax + orl %eax, hold_r /* hold |= *((ushort *)in)++ << bits */ + +.L_get_length_code: + movl lmask(%esp), %edx /* edx = lmask */ + movl lcode(%esp), %ecx /* ecx = lcode */ + andl hold_r, %edx /* edx &= hold */ + movl (%ecx,%edx,4), %eax /* eax = lcode[hold & lmask] */ + +.L_dolen: + /* regs: %esi = in, %ebp = hold, %bl = bits, %edi = out + * + * dolen: + * bits -= this.bits; + * hold >>= this.bits + */ + movb %ah, %cl /* cl = this.bits */ + subb %ah, bits_r /* bits -= this.bits */ + shrl %cl, hold_r /* hold >>= this.bits */ + + /* check if op is a literal + * if (op == 0) { + * PUP(out) = this.val; + * } + */ + testb %al, %al + jnz .L_test_for_length_base /* if (op != 0) 45.7% */ + + shrl $16, %eax /* output this.val char */ + stosb + jmp .L_while_test + +.L_test_for_length_base: + /* regs: %esi = in, %ebp = hold, %bl = bits, %edi = out, %edx = len + * + * else if (op & 16) { + * len = this.val + * op &= 15 + * if (op) { + * if (op > bits) { + * hold |= *((unsigned short *)in)++ << bits; + * bits += 16 + * } + * len += hold & mask[op]; + * bits -= op; + * hold >>= op; + * } + */ +#define len_r %edx + movl %eax, len_r /* len = this */ + shrl $16, len_r /* len = this.val */ + movb %al, %cl + + testb $16, %al + jz .L_test_for_second_level_length /* if ((op & 16) == 0) 8% */ + andb $15, %cl /* op &= 15 */ + jz .L_save_len /* if (!op) */ + cmpb %cl, bits_r + jae .L_add_bits_to_len /* if (op <= bits) */ + + movb %cl, %ch /* stash op in ch, freeing cl */ + xorl %eax, %eax + lodsw /* al = *(ushort *)in++ */ + movb bits_r, %cl /* cl = bits, needs it for shifting */ + addb $16, bits_r /* bits += 16 */ + shll %cl, %eax + orl %eax, hold_r /* hold |= *((ushort *)in)++ << bits */ + movb %ch, %cl /* move op back to ecx */ + +.L_add_bits_to_len: + movl $1, %eax + shll %cl, %eax + decl %eax + subb %cl, bits_r + andl hold_r, %eax /* eax &= hold */ + shrl %cl, hold_r + addl %eax, len_r /* len += hold & mask[op] */ + +.L_save_len: + movl len_r, len(%esp) /* save len */ +#undef len_r + +.L_decode_distance: + /* regs: %esi = in, %ebp = hold, %bl = bits, %edi = out, %edx = dist + * + * if (bits < 15) { + * hold |= *((unsigned short *)in)++ << bits; + * bits += 16 + * } + * this = dcode[hold & dmask]; + * dodist: + * bits -= this.bits; + * hold >>= this.bits; + * op = this.op; + */ + + cmpb $15, bits_r + ja .L_get_distance_code /* if (15 < bits) */ + + xorl %eax, %eax + lodsw /* al = *(ushort *)in++ */ + movb bits_r, %cl /* cl = bits, needs it for shifting */ + addb $16, bits_r /* bits += 16 */ + shll %cl, %eax + orl %eax, hold_r /* hold |= *((ushort *)in)++ << bits */ + +.L_get_distance_code: + movl dmask(%esp), %edx /* edx = dmask */ + movl dcode(%esp), %ecx /* ecx = dcode */ + andl hold_r, %edx /* edx &= hold */ + movl (%ecx,%edx,4), %eax /* eax = dcode[hold & dmask] */ + +#define dist_r %edx +.L_dodist: + movl %eax, dist_r /* dist = this */ + shrl $16, dist_r /* dist = this.val */ + movb %ah, %cl + subb %ah, bits_r /* bits -= this.bits */ + shrl %cl, hold_r /* hold >>= this.bits */ + + /* if (op & 16) { + * dist = this.val + * op &= 15 + * if (op > bits) { + * hold |= *((unsigned short *)in)++ << bits; + * bits += 16 + * } + * dist += hold & mask[op]; + * bits -= op; + * hold >>= op; + */ + movb %al, %cl /* cl = this.op */ + + testb $16, %al /* if ((op & 16) == 0) */ + jz .L_test_for_second_level_dist + andb $15, %cl /* op &= 15 */ + jz .L_check_dist_one + cmpb %cl, bits_r + jae .L_add_bits_to_dist /* if (op <= bits) 97.6% */ + + movb %cl, %ch /* stash op in ch, freeing cl */ + xorl %eax, %eax + lodsw /* al = *(ushort *)in++ */ + movb bits_r, %cl /* cl = bits, needs it for shifting */ + addb $16, bits_r /* bits += 16 */ + shll %cl, %eax + orl %eax, hold_r /* hold |= *((ushort *)in)++ << bits */ + movb %ch, %cl /* move op back to ecx */ + +.L_add_bits_to_dist: + movl $1, %eax + shll %cl, %eax + decl %eax /* (1 << op) - 1 */ + subb %cl, bits_r + andl hold_r, %eax /* eax &= hold */ + shrl %cl, hold_r + addl %eax, dist_r /* dist += hold & ((1 << op) - 1) */ + jmp .L_check_window + +.L_check_window: + /* regs: %esi = from, %ebp = hold, %bl = bits, %edi = out, %edx = dist + * %ecx = nbytes + * + * nbytes = out - beg; + * if (dist <= nbytes) { + * from = out - dist; + * do { + * PUP(out) = PUP(from); + * } while (--len > 0) { + * } + */ + + movl in_r, in(%esp) /* save in so from can use it's reg */ + movl out_r, %eax + subl beg(%esp), %eax /* nbytes = out - beg */ + + cmpl dist_r, %eax + jb .L_clip_window /* if (dist > nbytes) 4.2% */ + + movl len(%esp), %ecx + movl out_r, from_r + subl dist_r, from_r /* from = out - dist */ + + subl $3, %ecx + movb (from_r), %al + movb %al, (out_r) + movb 1(from_r), %al + movb 2(from_r), %dl + addl $3, from_r + movb %al, 1(out_r) + movb %dl, 2(out_r) + addl $3, out_r + rep movsb + + movl in(%esp), in_r /* move in back to %esi, toss from */ + jmp .L_while_test + +.align 16,0x90 +.L_check_dist_one: + cmpl $1, dist_r + jne .L_check_window + cmpl out_r, beg(%esp) + je .L_check_window + + decl out_r + movl len(%esp), %ecx + movb (out_r), %al + subl $3, %ecx + + movb %al, 1(out_r) + movb %al, 2(out_r) + movb %al, 3(out_r) + addl $4, out_r + rep stosb + + jmp .L_while_test + +.align 16,0x90 +.L_test_for_second_level_length: + /* else if ((op & 64) == 0) { + * this = lcode[this.val + (hold & mask[op])]; + * } + */ + testb $64, %al + jnz .L_test_for_end_of_block /* if ((op & 64) != 0) */ + + movl $1, %eax + shll %cl, %eax + decl %eax + andl hold_r, %eax /* eax &= hold */ + addl %edx, %eax /* eax += this.val */ + movl lcode(%esp), %edx /* edx = lcode */ + movl (%edx,%eax,4), %eax /* eax = lcode[val + (hold&mask[op])] */ + jmp .L_dolen + +.align 16,0x90 +.L_test_for_second_level_dist: + /* else if ((op & 64) == 0) { + * this = dcode[this.val + (hold & mask[op])]; + * } + */ + testb $64, %al + jnz .L_invalid_distance_code /* if ((op & 64) != 0) */ + + movl $1, %eax + shll %cl, %eax + decl %eax + andl hold_r, %eax /* eax &= hold */ + addl %edx, %eax /* eax += this.val */ + movl dcode(%esp), %edx /* edx = dcode */ + movl (%edx,%eax,4), %eax /* eax = dcode[val + (hold&mask[op])] */ + jmp .L_dodist + +.align 16,0x90 +.L_clip_window: + /* regs: %esi = from, %ebp = hold, %bl = bits, %edi = out, %edx = dist + * %ecx = nbytes + * + * else { + * if (dist > wsize) { + * invalid distance + * } + * from = window; + * nbytes = dist - nbytes; + * if (write == 0) { + * from += wsize - nbytes; + */ +#define nbytes_r %ecx + movl %eax, nbytes_r + movl wsize(%esp), %eax /* prepare for dist compare */ + negl nbytes_r /* nbytes = -nbytes */ + movl window(%esp), from_r /* from = window */ + + cmpl dist_r, %eax + jb .L_invalid_distance_too_far /* if (dist > wsize) */ + + addl dist_r, nbytes_r /* nbytes = dist - nbytes */ + cmpl $0, write(%esp) + jne .L_wrap_around_window /* if (write != 0) */ + + subl nbytes_r, %eax + addl %eax, from_r /* from += wsize - nbytes */ + + /* regs: %esi = from, %ebp = hold, %bl = bits, %edi = out, %edx = dist + * %ecx = nbytes, %eax = len + * + * if (nbytes < len) { + * len -= nbytes; + * do { + * PUP(out) = PUP(from); + * } while (--nbytes); + * from = out - dist; + * } + * } + */ +#define len_r %eax + movl len(%esp), len_r + cmpl nbytes_r, len_r + jbe .L_do_copy1 /* if (nbytes >= len) */ + + subl nbytes_r, len_r /* len -= nbytes */ + rep movsb + movl out_r, from_r + subl dist_r, from_r /* from = out - dist */ + jmp .L_do_copy1 + + cmpl nbytes_r, len_r + jbe .L_do_copy1 /* if (nbytes >= len) */ + + subl nbytes_r, len_r /* len -= nbytes */ + rep movsb + movl out_r, from_r + subl dist_r, from_r /* from = out - dist */ + jmp .L_do_copy1 + +.L_wrap_around_window: + /* regs: %esi = from, %ebp = hold, %bl = bits, %edi = out, %edx = dist + * %ecx = nbytes, %eax = write, %eax = len + * + * else if (write < nbytes) { + * from += wsize + write - nbytes; + * nbytes -= write; + * if (nbytes < len) { + * len -= nbytes; + * do { + * PUP(out) = PUP(from); + * } while (--nbytes); + * from = window; + * nbytes = write; + * if (nbytes < len) { + * len -= nbytes; + * do { + * PUP(out) = PUP(from); + * } while(--nbytes); + * from = out - dist; + * } + * } + * } + */ +#define write_r %eax + movl write(%esp), write_r + cmpl write_r, nbytes_r + jbe .L_contiguous_in_window /* if (write >= nbytes) */ + + addl wsize(%esp), from_r + addl write_r, from_r + subl nbytes_r, from_r /* from += wsize + write - nbytes */ + subl write_r, nbytes_r /* nbytes -= write */ +#undef write_r + + movl len(%esp), len_r + cmpl nbytes_r, len_r + jbe .L_do_copy1 /* if (nbytes >= len) */ + + subl nbytes_r, len_r /* len -= nbytes */ + rep movsb + movl window(%esp), from_r /* from = window */ + movl write(%esp), nbytes_r /* nbytes = write */ + cmpl nbytes_r, len_r + jbe .L_do_copy1 /* if (nbytes >= len) */ + + subl nbytes_r, len_r /* len -= nbytes */ + rep movsb + movl out_r, from_r + subl dist_r, from_r /* from = out - dist */ + jmp .L_do_copy1 + +.L_contiguous_in_window: + /* regs: %esi = from, %ebp = hold, %bl = bits, %edi = out, %edx = dist + * %ecx = nbytes, %eax = write, %eax = len + * + * else { + * from += write - nbytes; + * if (nbytes < len) { + * len -= nbytes; + * do { + * PUP(out) = PUP(from); + * } while (--nbytes); + * from = out - dist; + * } + * } + */ +#define write_r %eax + addl write_r, from_r + subl nbytes_r, from_r /* from += write - nbytes */ +#undef write_r + + movl len(%esp), len_r + cmpl nbytes_r, len_r + jbe .L_do_copy1 /* if (nbytes >= len) */ + + subl nbytes_r, len_r /* len -= nbytes */ + rep movsb + movl out_r, from_r + subl dist_r, from_r /* from = out - dist */ + +.L_do_copy1: + /* regs: %esi = from, %esi = in, %ebp = hold, %bl = bits, %edi = out + * %eax = len + * + * while (len > 0) { + * PUP(out) = PUP(from); + * len--; + * } + * } + * } while (in < last && out < end); + */ +#undef nbytes_r +#define in_r %esi + movl len_r, %ecx + rep movsb + + movl in(%esp), in_r /* move in back to %esi, toss from */ + jmp .L_while_test + +#undef len_r +#undef dist_r + +#endif /* NO_MMX || RUN_TIME_MMX */ + + +/*** MMX code ***/ + +#if defined( USE_MMX ) || defined( RUN_TIME_MMX ) + +.align 32,0x90 +.L_init_mmx: + emms + +#undef bits_r +#undef bitslong_r +#define bitslong_r %ebp +#define hold_mm %mm0 + movd %ebp, hold_mm + movl %ebx, bitslong_r + +#define used_mm %mm1 +#define dmask2_mm %mm2 +#define lmask2_mm %mm3 +#define lmask_mm %mm4 +#define dmask_mm %mm5 +#define tmp_mm %mm6 + + movd lmask(%esp), lmask_mm + movq lmask_mm, lmask2_mm + movd dmask(%esp), dmask_mm + movq dmask_mm, dmask2_mm + pxor used_mm, used_mm + movl lcode(%esp), %ebx /* ebx = lcode */ + jmp .L_do_loop_mmx + +.align 32,0x90 +.L_while_test_mmx: + /* while (in < last && out < end) + */ + cmpl out_r, end(%esp) + jbe .L_break_loop /* if (out >= end) */ + + cmpl in_r, last(%esp) + jbe .L_break_loop + +.L_do_loop_mmx: + psrlq used_mm, hold_mm /* hold_mm >>= last bit length */ + + cmpl $32, bitslong_r + ja .L_get_length_code_mmx /* if (32 < bits) */ + + movd bitslong_r, tmp_mm + movd (in_r), %mm7 + addl $4, in_r + psllq tmp_mm, %mm7 + addl $32, bitslong_r + por %mm7, hold_mm /* hold_mm |= *((uint *)in)++ << bits */ + +.L_get_length_code_mmx: + pand hold_mm, lmask_mm + movd lmask_mm, %eax + movq lmask2_mm, lmask_mm + movl (%ebx,%eax,4), %eax /* eax = lcode[hold & lmask] */ + +.L_dolen_mmx: + movzbl %ah, %ecx /* ecx = this.bits */ + movd %ecx, used_mm + subl %ecx, bitslong_r /* bits -= this.bits */ + + testb %al, %al + jnz .L_test_for_length_base_mmx /* if (op != 0) 45.7% */ + + shrl $16, %eax /* output this.val char */ + stosb + jmp .L_while_test_mmx + +.L_test_for_length_base_mmx: +#define len_r %edx + movl %eax, len_r /* len = this */ + shrl $16, len_r /* len = this.val */ + + testb $16, %al + jz .L_test_for_second_level_length_mmx /* if ((op & 16) == 0) 8% */ + andl $15, %eax /* op &= 15 */ + jz .L_decode_distance_mmx /* if (!op) */ + + psrlq used_mm, hold_mm /* hold_mm >>= last bit length */ + movd %eax, used_mm + movd hold_mm, %ecx + subl %eax, bitslong_r + andl .L_mask(,%eax,4), %ecx + addl %ecx, len_r /* len += hold & mask[op] */ + +.L_decode_distance_mmx: + psrlq used_mm, hold_mm /* hold_mm >>= last bit length */ + + cmpl $32, bitslong_r + ja .L_get_dist_code_mmx /* if (32 < bits) */ + + movd bitslong_r, tmp_mm + movd (in_r), %mm7 + addl $4, in_r + psllq tmp_mm, %mm7 + addl $32, bitslong_r + por %mm7, hold_mm /* hold_mm |= *((uint *)in)++ << bits */ + +.L_get_dist_code_mmx: + movl dcode(%esp), %ebx /* ebx = dcode */ + pand hold_mm, dmask_mm + movd dmask_mm, %eax + movq dmask2_mm, dmask_mm + movl (%ebx,%eax,4), %eax /* eax = dcode[hold & lmask] */ + +.L_dodist_mmx: +#define dist_r %ebx + movzbl %ah, %ecx /* ecx = this.bits */ + movl %eax, dist_r + shrl $16, dist_r /* dist = this.val */ + subl %ecx, bitslong_r /* bits -= this.bits */ + movd %ecx, used_mm + + testb $16, %al /* if ((op & 16) == 0) */ + jz .L_test_for_second_level_dist_mmx + andl $15, %eax /* op &= 15 */ + jz .L_check_dist_one_mmx + +.L_add_bits_to_dist_mmx: + psrlq used_mm, hold_mm /* hold_mm >>= last bit length */ + movd %eax, used_mm /* save bit length of current op */ + movd hold_mm, %ecx /* get the next bits on input stream */ + subl %eax, bitslong_r /* bits -= op bits */ + andl .L_mask(,%eax,4), %ecx /* ecx = hold & mask[op] */ + addl %ecx, dist_r /* dist += hold & mask[op] */ + +.L_check_window_mmx: + movl in_r, in(%esp) /* save in so from can use it's reg */ + movl out_r, %eax + subl beg(%esp), %eax /* nbytes = out - beg */ + + cmpl dist_r, %eax + jb .L_clip_window_mmx /* if (dist > nbytes) 4.2% */ + + movl len_r, %ecx + movl out_r, from_r + subl dist_r, from_r /* from = out - dist */ + + subl $3, %ecx + movb (from_r), %al + movb %al, (out_r) + movb 1(from_r), %al + movb 2(from_r), %dl + addl $3, from_r + movb %al, 1(out_r) + movb %dl, 2(out_r) + addl $3, out_r + rep movsb + + movl in(%esp), in_r /* move in back to %esi, toss from */ + movl lcode(%esp), %ebx /* move lcode back to %ebx, toss dist */ + jmp .L_while_test_mmx + +.align 16,0x90 +.L_check_dist_one_mmx: + cmpl $1, dist_r + jne .L_check_window_mmx + cmpl out_r, beg(%esp) + je .L_check_window_mmx + + decl out_r + movl len_r, %ecx + movb (out_r), %al + subl $3, %ecx + + movb %al, 1(out_r) + movb %al, 2(out_r) + movb %al, 3(out_r) + addl $4, out_r + rep stosb + + movl lcode(%esp), %ebx /* move lcode back to %ebx, toss dist */ + jmp .L_while_test_mmx + +.align 16,0x90 +.L_test_for_second_level_length_mmx: + testb $64, %al + jnz .L_test_for_end_of_block /* if ((op & 64) != 0) */ + + andl $15, %eax + psrlq used_mm, hold_mm /* hold_mm >>= last bit length */ + movd hold_mm, %ecx + andl .L_mask(,%eax,4), %ecx + addl len_r, %ecx + movl (%ebx,%ecx,4), %eax /* eax = lcode[hold & lmask] */ + jmp .L_dolen_mmx + +.align 16,0x90 +.L_test_for_second_level_dist_mmx: + testb $64, %al + jnz .L_invalid_distance_code /* if ((op & 64) != 0) */ + + andl $15, %eax + psrlq used_mm, hold_mm /* hold_mm >>= last bit length */ + movd hold_mm, %ecx + andl .L_mask(,%eax,4), %ecx + movl dcode(%esp), %eax /* ecx = dcode */ + addl dist_r, %ecx + movl (%eax,%ecx,4), %eax /* eax = lcode[hold & lmask] */ + jmp .L_dodist_mmx + +.align 16,0x90 +.L_clip_window_mmx: +#define nbytes_r %ecx + movl %eax, nbytes_r + movl wsize(%esp), %eax /* prepare for dist compare */ + negl nbytes_r /* nbytes = -nbytes */ + movl window(%esp), from_r /* from = window */ + + cmpl dist_r, %eax + jb .L_invalid_distance_too_far /* if (dist > wsize) */ + + addl dist_r, nbytes_r /* nbytes = dist - nbytes */ + cmpl $0, write(%esp) + jne .L_wrap_around_window_mmx /* if (write != 0) */ + + subl nbytes_r, %eax + addl %eax, from_r /* from += wsize - nbytes */ + + cmpl nbytes_r, len_r + jbe .L_do_copy1_mmx /* if (nbytes >= len) */ + + subl nbytes_r, len_r /* len -= nbytes */ + rep movsb + movl out_r, from_r + subl dist_r, from_r /* from = out - dist */ + jmp .L_do_copy1_mmx + + cmpl nbytes_r, len_r + jbe .L_do_copy1_mmx /* if (nbytes >= len) */ + + subl nbytes_r, len_r /* len -= nbytes */ + rep movsb + movl out_r, from_r + subl dist_r, from_r /* from = out - dist */ + jmp .L_do_copy1_mmx + +.L_wrap_around_window_mmx: +#define write_r %eax + movl write(%esp), write_r + cmpl write_r, nbytes_r + jbe .L_contiguous_in_window_mmx /* if (write >= nbytes) */ + + addl wsize(%esp), from_r + addl write_r, from_r + subl nbytes_r, from_r /* from += wsize + write - nbytes */ + subl write_r, nbytes_r /* nbytes -= write */ +#undef write_r + + cmpl nbytes_r, len_r + jbe .L_do_copy1_mmx /* if (nbytes >= len) */ + + subl nbytes_r, len_r /* len -= nbytes */ + rep movsb + movl window(%esp), from_r /* from = window */ + movl write(%esp), nbytes_r /* nbytes = write */ + cmpl nbytes_r, len_r + jbe .L_do_copy1_mmx /* if (nbytes >= len) */ + + subl nbytes_r, len_r /* len -= nbytes */ + rep movsb + movl out_r, from_r + subl dist_r, from_r /* from = out - dist */ + jmp .L_do_copy1_mmx + +.L_contiguous_in_window_mmx: +#define write_r %eax + addl write_r, from_r + subl nbytes_r, from_r /* from += write - nbytes */ +#undef write_r + + cmpl nbytes_r, len_r + jbe .L_do_copy1_mmx /* if (nbytes >= len) */ + + subl nbytes_r, len_r /* len -= nbytes */ + rep movsb + movl out_r, from_r + subl dist_r, from_r /* from = out - dist */ + +.L_do_copy1_mmx: +#undef nbytes_r +#define in_r %esi + movl len_r, %ecx + rep movsb + + movl in(%esp), in_r /* move in back to %esi, toss from */ + movl lcode(%esp), %ebx /* move lcode back to %ebx, toss dist */ + jmp .L_while_test_mmx + +#undef hold_r +#undef bitslong_r + +#endif /* USE_MMX || RUN_TIME_MMX */ + + +/*** USE_MMX, NO_MMX, and RUNTIME_MMX from here on ***/ + +.L_invalid_distance_code: + /* else { + * strm->msg = "invalid distance code"; + * state->mode = BAD; + * } + */ + movl $.L_invalid_distance_code_msg, %ecx + movl $INFLATE_MODE_BAD, %edx + jmp .L_update_stream_state + +.L_test_for_end_of_block: + /* else if (op & 32) { + * state->mode = TYPE; + * break; + * } + */ + testb $32, %al + jz .L_invalid_literal_length_code /* if ((op & 32) == 0) */ + + movl $0, %ecx + movl $INFLATE_MODE_TYPE, %edx + jmp .L_update_stream_state + +.L_invalid_literal_length_code: + /* else { + * strm->msg = "invalid literal/length code"; + * state->mode = BAD; + * } + */ + movl $.L_invalid_literal_length_code_msg, %ecx + movl $INFLATE_MODE_BAD, %edx + jmp .L_update_stream_state + +.L_invalid_distance_too_far: + /* strm->msg = "invalid distance too far back"; + * state->mode = BAD; + */ + movl in(%esp), in_r /* from_r has in's reg, put in back */ + movl $.L_invalid_distance_too_far_msg, %ecx + movl $INFLATE_MODE_BAD, %edx + jmp .L_update_stream_state + +.L_update_stream_state: + /* set strm->msg = %ecx, strm->state->mode = %edx */ + movl strm_sp(%esp), %eax + testl %ecx, %ecx /* if (msg != NULL) */ + jz .L_skip_msg + movl %ecx, msg_strm(%eax) /* strm->msg = msg */ +.L_skip_msg: + movl state_strm(%eax), %eax /* state = strm->state */ + movl %edx, mode_state(%eax) /* state->mode = edx (BAD | TYPE) */ + jmp .L_break_loop + +.align 32,0x90 +.L_break_loop: + +/* + * Regs: + * + * bits = %ebp when mmx, and in %ebx when non-mmx + * hold = %hold_mm when mmx, and in %ebp when non-mmx + * in = %esi + * out = %edi + */ + +#if defined( USE_MMX ) || defined( RUN_TIME_MMX ) + +#if defined( RUN_TIME_MMX ) + + cmpl $DO_USE_MMX, inflate_fast_use_mmx + jne .L_update_next_in + +#endif /* RUN_TIME_MMX */ + + movl %ebp, %ebx + +.L_update_next_in: + +#endif + +#define strm_r %eax +#define state_r %edx + + /* len = bits >> 3; + * in -= len; + * bits -= len << 3; + * hold &= (1U << bits) - 1; + * state->hold = hold; + * state->bits = bits; + * strm->next_in = in; + * strm->next_out = out; + */ + movl strm_sp(%esp), strm_r + movl %ebx, %ecx + movl state_strm(strm_r), state_r + shrl $3, %ecx + subl %ecx, in_r + shll $3, %ecx + subl %ecx, %ebx + movl out_r, next_out_strm(strm_r) + movl %ebx, bits_state(state_r) + movl %ebx, %ecx + + leal buf(%esp), %ebx + cmpl %ebx, last(%esp) + jne .L_buf_not_used /* if buf != last */ + + subl %ebx, in_r /* in -= buf */ + movl next_in_strm(strm_r), %ebx + movl %ebx, last(%esp) /* last = strm->next_in */ + addl %ebx, in_r /* in += strm->next_in */ + movl avail_in_strm(strm_r), %ebx + subl $11, %ebx + addl %ebx, last(%esp) /* last = &strm->next_in[ avail_in - 11 ] */ + +.L_buf_not_used: + movl in_r, next_in_strm(strm_r) + + movl $1, %ebx + shll %cl, %ebx + decl %ebx + +#if defined( USE_MMX ) || defined( RUN_TIME_MMX ) + +#if defined( RUN_TIME_MMX ) + + cmpl $DO_USE_MMX, inflate_fast_use_mmx + jne .L_update_hold + +#endif /* RUN_TIME_MMX */ + + psrlq used_mm, hold_mm /* hold_mm >>= last bit length */ + movd hold_mm, %ebp + + emms + +.L_update_hold: + +#endif /* USE_MMX || RUN_TIME_MMX */ + + andl %ebx, %ebp + movl %ebp, hold_state(state_r) + +#define last_r %ebx + + /* strm->avail_in = in < last ? 11 + (last - in) : 11 - (in - last) */ + movl last(%esp), last_r + cmpl in_r, last_r + jbe .L_last_is_smaller /* if (in >= last) */ + + subl in_r, last_r /* last -= in */ + addl $11, last_r /* last += 11 */ + movl last_r, avail_in_strm(strm_r) + jmp .L_fixup_out +.L_last_is_smaller: + subl last_r, in_r /* in -= last */ + negl in_r /* in = -in */ + addl $11, in_r /* in += 11 */ + movl in_r, avail_in_strm(strm_r) + +#undef last_r +#define end_r %ebx + +.L_fixup_out: + /* strm->avail_out = out < end ? 257 + (end - out) : 257 - (out - end)*/ + movl end(%esp), end_r + cmpl out_r, end_r + jbe .L_end_is_smaller /* if (out >= end) */ + + subl out_r, end_r /* end -= out */ + addl $257, end_r /* end += 257 */ + movl end_r, avail_out_strm(strm_r) + jmp .L_done +.L_end_is_smaller: + subl end_r, out_r /* out -= end */ + negl out_r /* out = -out */ + addl $257, out_r /* out += 257 */ + movl out_r, avail_out_strm(strm_r) + +#undef end_r +#undef strm_r +#undef state_r + +.L_done: + addl $local_var_size, %esp + popf + popl %ebx + popl %ebp + popl %esi + popl %edi + ret + +#if defined( GAS_ELF ) +/* elf info */ +.type inflate_fast,@function +.size inflate_fast,.-inflate_fast +#endif diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/iostream/test.cpp b/software/scsi2sd-util/zlib-1.2.8/contrib/iostream/test.cpp new file mode 100644 index 0000000..7d265b3 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/iostream/test.cpp @@ -0,0 +1,24 @@ + +#include "zfstream.h" + +int main() { + + // Construct a stream object with this filebuffer. Anything sent + // to this stream will go to standard out. + gzofstream os( 1, ios::out ); + + // This text is getting compressed and sent to stdout. + // To prove this, run 'test | zcat'. + os << "Hello, Mommy" << endl; + + os << setcompressionlevel( Z_NO_COMPRESSION ); + os << "hello, hello, hi, ho!" << endl; + + setcompressionlevel( os, Z_DEFAULT_COMPRESSION ) + << "I'm compressing again" << endl; + + os.close(); + + return 0; + +} diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/iostream/zfstream.cpp b/software/scsi2sd-util/zlib-1.2.8/contrib/iostream/zfstream.cpp new file mode 100644 index 0000000..d0cd85f --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/iostream/zfstream.cpp @@ -0,0 +1,329 @@ + +#include "zfstream.h" + +gzfilebuf::gzfilebuf() : + file(NULL), + mode(0), + own_file_descriptor(0) +{ } + +gzfilebuf::~gzfilebuf() { + + sync(); + if ( own_file_descriptor ) + close(); + +} + +gzfilebuf *gzfilebuf::open( const char *name, + int io_mode ) { + + if ( is_open() ) + return NULL; + + char char_mode[10]; + char *p = char_mode; + + if ( io_mode & ios::in ) { + mode = ios::in; + *p++ = 'r'; + } else if ( io_mode & ios::app ) { + mode = ios::app; + *p++ = 'a'; + } else { + mode = ios::out; + *p++ = 'w'; + } + + if ( io_mode & ios::binary ) { + mode |= ios::binary; + *p++ = 'b'; + } + + // Hard code the compression level + if ( io_mode & (ios::out|ios::app )) { + *p++ = '9'; + } + + // Put the end-of-string indicator + *p = '\0'; + + if ( (file = gzopen(name, char_mode)) == NULL ) + return NULL; + + own_file_descriptor = 1; + + return this; + +} + +gzfilebuf *gzfilebuf::attach( int file_descriptor, + int io_mode ) { + + if ( is_open() ) + return NULL; + + char char_mode[10]; + char *p = char_mode; + + if ( io_mode & ios::in ) { + mode = ios::in; + *p++ = 'r'; + } else if ( io_mode & ios::app ) { + mode = ios::app; + *p++ = 'a'; + } else { + mode = ios::out; + *p++ = 'w'; + } + + if ( io_mode & ios::binary ) { + mode |= ios::binary; + *p++ = 'b'; + } + + // Hard code the compression level + if ( io_mode & (ios::out|ios::app )) { + *p++ = '9'; + } + + // Put the end-of-string indicator + *p = '\0'; + + if ( (file = gzdopen(file_descriptor, char_mode)) == NULL ) + return NULL; + + own_file_descriptor = 0; + + return this; + +} + +gzfilebuf *gzfilebuf::close() { + + if ( is_open() ) { + + sync(); + gzclose( file ); + file = NULL; + + } + + return this; + +} + +int gzfilebuf::setcompressionlevel( int comp_level ) { + + return gzsetparams(file, comp_level, -2); + +} + +int gzfilebuf::setcompressionstrategy( int comp_strategy ) { + + return gzsetparams(file, -2, comp_strategy); + +} + + +streampos gzfilebuf::seekoff( streamoff off, ios::seek_dir dir, int which ) { + + return streampos(EOF); + +} + +int gzfilebuf::underflow() { + + // If the file hasn't been opened for reading, error. + if ( !is_open() || !(mode & ios::in) ) + return EOF; + + // if a buffer doesn't exists, allocate one. + if ( !base() ) { + + if ( (allocate()) == EOF ) + return EOF; + setp(0,0); + + } else { + + if ( in_avail() ) + return (unsigned char) *gptr(); + + if ( out_waiting() ) { + if ( flushbuf() == EOF ) + return EOF; + } + + } + + // Attempt to fill the buffer. + + int result = fillbuf(); + if ( result == EOF ) { + // disable get area + setg(0,0,0); + return EOF; + } + + return (unsigned char) *gptr(); + +} + +int gzfilebuf::overflow( int c ) { + + if ( !is_open() || !(mode & ios::out) ) + return EOF; + + if ( !base() ) { + if ( allocate() == EOF ) + return EOF; + setg(0,0,0); + } else { + if (in_avail()) { + return EOF; + } + if (out_waiting()) { + if (flushbuf() == EOF) + return EOF; + } + } + + int bl = blen(); + setp( base(), base() + bl); + + if ( c != EOF ) { + + *pptr() = c; + pbump(1); + + } + + return 0; + +} + +int gzfilebuf::sync() { + + if ( !is_open() ) + return EOF; + + if ( out_waiting() ) + return flushbuf(); + + return 0; + +} + +int gzfilebuf::flushbuf() { + + int n; + char *q; + + q = pbase(); + n = pptr() - q; + + if ( gzwrite( file, q, n) < n ) + return EOF; + + setp(0,0); + + return 0; + +} + +int gzfilebuf::fillbuf() { + + int required; + char *p; + + p = base(); + + required = blen(); + + int t = gzread( file, p, required ); + + if ( t <= 0) return EOF; + + setg( base(), base(), base()+t); + + return t; + +} + +gzfilestream_common::gzfilestream_common() : + ios( gzfilestream_common::rdbuf() ) +{ } + +gzfilestream_common::~gzfilestream_common() +{ } + +void gzfilestream_common::attach( int fd, int io_mode ) { + + if ( !buffer.attach( fd, io_mode) ) + clear( ios::failbit | ios::badbit ); + else + clear(); + +} + +void gzfilestream_common::open( const char *name, int io_mode ) { + + if ( !buffer.open( name, io_mode ) ) + clear( ios::failbit | ios::badbit ); + else + clear(); + +} + +void gzfilestream_common::close() { + + if ( !buffer.close() ) + clear( ios::failbit | ios::badbit ); + +} + +gzfilebuf *gzfilestream_common::rdbuf() +{ + return &buffer; +} + +gzifstream::gzifstream() : + ios( gzfilestream_common::rdbuf() ) +{ + clear( ios::badbit ); +} + +gzifstream::gzifstream( const char *name, int io_mode ) : + ios( gzfilestream_common::rdbuf() ) +{ + gzfilestream_common::open( name, io_mode ); +} + +gzifstream::gzifstream( int fd, int io_mode ) : + ios( gzfilestream_common::rdbuf() ) +{ + gzfilestream_common::attach( fd, io_mode ); +} + +gzifstream::~gzifstream() { } + +gzofstream::gzofstream() : + ios( gzfilestream_common::rdbuf() ) +{ + clear( ios::badbit ); +} + +gzofstream::gzofstream( const char *name, int io_mode ) : + ios( gzfilestream_common::rdbuf() ) +{ + gzfilestream_common::open( name, io_mode ); +} + +gzofstream::gzofstream( int fd, int io_mode ) : + ios( gzfilestream_common::rdbuf() ) +{ + gzfilestream_common::attach( fd, io_mode ); +} + +gzofstream::~gzofstream() { } diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/iostream/zfstream.h b/software/scsi2sd-util/zlib-1.2.8/contrib/iostream/zfstream.h new file mode 100644 index 0000000..ed79098 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/iostream/zfstream.h @@ -0,0 +1,128 @@ + +#ifndef zfstream_h +#define zfstream_h + +#include +#include "zlib.h" + +class gzfilebuf : public streambuf { + +public: + + gzfilebuf( ); + virtual ~gzfilebuf(); + + gzfilebuf *open( const char *name, int io_mode ); + gzfilebuf *attach( int file_descriptor, int io_mode ); + gzfilebuf *close(); + + int setcompressionlevel( int comp_level ); + int setcompressionstrategy( int comp_strategy ); + + inline int is_open() const { return (file !=NULL); } + + virtual streampos seekoff( streamoff, ios::seek_dir, int ); + + virtual int sync(); + +protected: + + virtual int underflow(); + virtual int overflow( int = EOF ); + +private: + + gzFile file; + short mode; + short own_file_descriptor; + + int flushbuf(); + int fillbuf(); + +}; + +class gzfilestream_common : virtual public ios { + + friend class gzifstream; + friend class gzofstream; + friend gzofstream &setcompressionlevel( gzofstream &, int ); + friend gzofstream &setcompressionstrategy( gzofstream &, int ); + +public: + virtual ~gzfilestream_common(); + + void attach( int fd, int io_mode ); + void open( const char *name, int io_mode ); + void close(); + +protected: + gzfilestream_common(); + +private: + gzfilebuf *rdbuf(); + + gzfilebuf buffer; + +}; + +class gzifstream : public gzfilestream_common, public istream { + +public: + + gzifstream(); + gzifstream( const char *name, int io_mode = ios::in ); + gzifstream( int fd, int io_mode = ios::in ); + + virtual ~gzifstream(); + +}; + +class gzofstream : public gzfilestream_common, public ostream { + +public: + + gzofstream(); + gzofstream( const char *name, int io_mode = ios::out ); + gzofstream( int fd, int io_mode = ios::out ); + + virtual ~gzofstream(); + +}; + +template class gzomanip { + friend gzofstream &operator<<(gzofstream &, const gzomanip &); +public: + gzomanip(gzofstream &(*f)(gzofstream &, T), T v) : func(f), val(v) { } +private: + gzofstream &(*func)(gzofstream &, T); + T val; +}; + +template gzofstream &operator<<(gzofstream &s, const gzomanip &m) +{ + return (*m.func)(s, m.val); +} + +inline gzofstream &setcompressionlevel( gzofstream &s, int l ) +{ + (s.rdbuf())->setcompressionlevel(l); + return s; +} + +inline gzofstream &setcompressionstrategy( gzofstream &s, int l ) +{ + (s.rdbuf())->setcompressionstrategy(l); + return s; +} + +inline gzomanip setcompressionlevel(int l) +{ + return gzomanip(&setcompressionlevel,l); +} + +inline gzomanip setcompressionstrategy(int l) +{ + return gzomanip(&setcompressionstrategy,l); +} + +#endif diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/iostream2/zstream.h b/software/scsi2sd-util/zlib-1.2.8/contrib/iostream2/zstream.h new file mode 100644 index 0000000..43d2332 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/iostream2/zstream.h @@ -0,0 +1,307 @@ +/* + * + * Copyright (c) 1997 + * Christian Michelsen Research AS + * Advanced Computing + * Fantoftvegen 38, 5036 BERGEN, Norway + * http://www.cmr.no + * + * Permission to use, copy, modify, distribute and sell this software + * and its documentation for any purpose is hereby granted without fee, + * provided that the above copyright notice appear in all copies and + * that both that copyright notice and this permission notice appear + * in supporting documentation. Christian Michelsen Research AS makes no + * representations about the suitability of this software for any + * purpose. It is provided "as is" without express or implied warranty. + * + */ + +#ifndef ZSTREAM__H +#define ZSTREAM__H + +/* + * zstream.h - C++ interface to the 'zlib' general purpose compression library + * $Id: zstream.h 1.1 1997-06-25 12:00:56+02 tyge Exp tyge $ + */ + +#include +#include +#include +#include "zlib.h" + +#if defined(_WIN32) +# include +# include +# define SET_BINARY_MODE(file) setmode(fileno(file), O_BINARY) +#else +# define SET_BINARY_MODE(file) +#endif + +class zstringlen { +public: + zstringlen(class izstream&); + zstringlen(class ozstream&, const char*); + size_t value() const { return val.word; } +private: + struct Val { unsigned char byte; size_t word; } val; +}; + +// ----------------------------- izstream ----------------------------- + +class izstream +{ + public: + izstream() : m_fp(0) {} + izstream(FILE* fp) : m_fp(0) { open(fp); } + izstream(const char* name) : m_fp(0) { open(name); } + ~izstream() { close(); } + + /* Opens a gzip (.gz) file for reading. + * open() can be used to read a file which is not in gzip format; + * in this case read() will directly read from the file without + * decompression. errno can be checked to distinguish two error + * cases (if errno is zero, the zlib error is Z_MEM_ERROR). + */ + void open(const char* name) { + if (m_fp) close(); + m_fp = ::gzopen(name, "rb"); + } + + void open(FILE* fp) { + SET_BINARY_MODE(fp); + if (m_fp) close(); + m_fp = ::gzdopen(fileno(fp), "rb"); + } + + /* Flushes all pending input if necessary, closes the compressed file + * and deallocates all the (de)compression state. The return value is + * the zlib error number (see function error() below). + */ + int close() { + int r = ::gzclose(m_fp); + m_fp = 0; return r; + } + + /* Binary read the given number of bytes from the compressed file. + */ + int read(void* buf, size_t len) { + return ::gzread(m_fp, buf, len); + } + + /* Returns the error message for the last error which occurred on the + * given compressed file. errnum is set to zlib error number. If an + * error occurred in the file system and not in the compression library, + * errnum is set to Z_ERRNO and the application may consult errno + * to get the exact error code. + */ + const char* error(int* errnum) { + return ::gzerror(m_fp, errnum); + } + + gzFile fp() { return m_fp; } + + private: + gzFile m_fp; +}; + +/* + * Binary read the given (array of) object(s) from the compressed file. + * If the input file was not in gzip format, read() copies the objects number + * of bytes into the buffer. + * returns the number of uncompressed bytes actually read + * (0 for end of file, -1 for error). + */ +template +inline int read(izstream& zs, T* x, Items items) { + return ::gzread(zs.fp(), x, items*sizeof(T)); +} + +/* + * Binary input with the '>' operator. + */ +template +inline izstream& operator>(izstream& zs, T& x) { + ::gzread(zs.fp(), &x, sizeof(T)); + return zs; +} + + +inline zstringlen::zstringlen(izstream& zs) { + zs > val.byte; + if (val.byte == 255) zs > val.word; + else val.word = val.byte; +} + +/* + * Read length of string + the string with the '>' operator. + */ +inline izstream& operator>(izstream& zs, char* x) { + zstringlen len(zs); + ::gzread(zs.fp(), x, len.value()); + x[len.value()] = '\0'; + return zs; +} + +inline char* read_string(izstream& zs) { + zstringlen len(zs); + char* x = new char[len.value()+1]; + ::gzread(zs.fp(), x, len.value()); + x[len.value()] = '\0'; + return x; +} + +// ----------------------------- ozstream ----------------------------- + +class ozstream +{ + public: + ozstream() : m_fp(0), m_os(0) { + } + ozstream(FILE* fp, int level = Z_DEFAULT_COMPRESSION) + : m_fp(0), m_os(0) { + open(fp, level); + } + ozstream(const char* name, int level = Z_DEFAULT_COMPRESSION) + : m_fp(0), m_os(0) { + open(name, level); + } + ~ozstream() { + close(); + } + + /* Opens a gzip (.gz) file for writing. + * The compression level parameter should be in 0..9 + * errno can be checked to distinguish two error cases + * (if errno is zero, the zlib error is Z_MEM_ERROR). + */ + void open(const char* name, int level = Z_DEFAULT_COMPRESSION) { + char mode[4] = "wb\0"; + if (level != Z_DEFAULT_COMPRESSION) mode[2] = '0'+level; + if (m_fp) close(); + m_fp = ::gzopen(name, mode); + } + + /* open from a FILE pointer. + */ + void open(FILE* fp, int level = Z_DEFAULT_COMPRESSION) { + SET_BINARY_MODE(fp); + char mode[4] = "wb\0"; + if (level != Z_DEFAULT_COMPRESSION) mode[2] = '0'+level; + if (m_fp) close(); + m_fp = ::gzdopen(fileno(fp), mode); + } + + /* Flushes all pending output if necessary, closes the compressed file + * and deallocates all the (de)compression state. The return value is + * the zlib error number (see function error() below). + */ + int close() { + if (m_os) { + ::gzwrite(m_fp, m_os->str(), m_os->pcount()); + delete[] m_os->str(); delete m_os; m_os = 0; + } + int r = ::gzclose(m_fp); m_fp = 0; return r; + } + + /* Binary write the given number of bytes into the compressed file. + */ + int write(const void* buf, size_t len) { + return ::gzwrite(m_fp, (voidp) buf, len); + } + + /* Flushes all pending output into the compressed file. The parameter + * _flush is as in the deflate() function. The return value is the zlib + * error number (see function gzerror below). flush() returns Z_OK if + * the flush_ parameter is Z_FINISH and all output could be flushed. + * flush() should be called only when strictly necessary because it can + * degrade compression. + */ + int flush(int _flush) { + os_flush(); + return ::gzflush(m_fp, _flush); + } + + /* Returns the error message for the last error which occurred on the + * given compressed file. errnum is set to zlib error number. If an + * error occurred in the file system and not in the compression library, + * errnum is set to Z_ERRNO and the application may consult errno + * to get the exact error code. + */ + const char* error(int* errnum) { + return ::gzerror(m_fp, errnum); + } + + gzFile fp() { return m_fp; } + + ostream& os() { + if (m_os == 0) m_os = new ostrstream; + return *m_os; + } + + void os_flush() { + if (m_os && m_os->pcount()>0) { + ostrstream* oss = new ostrstream; + oss->fill(m_os->fill()); + oss->flags(m_os->flags()); + oss->precision(m_os->precision()); + oss->width(m_os->width()); + ::gzwrite(m_fp, m_os->str(), m_os->pcount()); + delete[] m_os->str(); delete m_os; m_os = oss; + } + } + + private: + gzFile m_fp; + ostrstream* m_os; +}; + +/* + * Binary write the given (array of) object(s) into the compressed file. + * returns the number of uncompressed bytes actually written + * (0 in case of error). + */ +template +inline int write(ozstream& zs, const T* x, Items items) { + return ::gzwrite(zs.fp(), (voidp) x, items*sizeof(T)); +} + +/* + * Binary output with the '<' operator. + */ +template +inline ozstream& operator<(ozstream& zs, const T& x) { + ::gzwrite(zs.fp(), (voidp) &x, sizeof(T)); + return zs; +} + +inline zstringlen::zstringlen(ozstream& zs, const char* x) { + val.byte = 255; val.word = ::strlen(x); + if (val.word < 255) zs < (val.byte = val.word); + else zs < val; +} + +/* + * Write length of string + the string with the '<' operator. + */ +inline ozstream& operator<(ozstream& zs, const char* x) { + zstringlen len(zs, x); + ::gzwrite(zs.fp(), (voidp) x, len.value()); + return zs; +} + +#ifdef _MSC_VER +inline ozstream& operator<(ozstream& zs, char* const& x) { + return zs < (const char*) x; +} +#endif + +/* + * Ascii write with the << operator; + */ +template +inline ostream& operator<<(ozstream& zs, const T& x) { + zs.os_flush(); + return zs.os() << x; +} + +#endif diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/iostream2/zstream_test.cpp b/software/scsi2sd-util/zlib-1.2.8/contrib/iostream2/zstream_test.cpp new file mode 100644 index 0000000..6273f62 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/iostream2/zstream_test.cpp @@ -0,0 +1,25 @@ +#include "zstream.h" +#include +#include +#include + +void main() { + char h[256] = "Hello"; + char* g = "Goodbye"; + ozstream out("temp.gz"); + out < "This works well" < h < g; + out.close(); + + izstream in("temp.gz"); // read it back + char *x = read_string(in), *y = new char[256], z[256]; + in > y > z; + in.close(); + cout << x << endl << y << endl << z << endl; + + out.open("temp.gz"); // try ascii output; zcat temp.gz to see the results + out << setw(50) << setfill('#') << setprecision(20) << x << endl << y << endl << z << endl; + out << z << endl << y << endl << x << endl; + out << 1.1234567890123456789 << endl; + + delete[] x; delete[] y; +} diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/iostream3/README b/software/scsi2sd-util/zlib-1.2.8/contrib/iostream3/README new file mode 100644 index 0000000..f7b319a --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/iostream3/README @@ -0,0 +1,35 @@ +These classes provide a C++ stream interface to the zlib library. It allows you +to do things like: + + gzofstream outf("blah.gz"); + outf << "These go into the gzip file " << 123 << endl; + +It does this by deriving a specialized stream buffer for gzipped files, which is +the way Stroustrup would have done it. :-> + +The gzifstream and gzofstream classes were originally written by Kevin Ruland +and made available in the zlib contrib/iostream directory. The older version still +compiles under gcc 2.xx, but not under gcc 3.xx, which sparked the development of +this version. + +The new classes are as standard-compliant as possible, closely following the +approach of the standard library's fstream classes. It compiles under gcc versions +3.2 and 3.3, but not under gcc 2.xx. This is mainly due to changes in the standard +library naming scheme. The new version of gzifstream/gzofstream/gzfilebuf differs +from the previous one in the following respects: +- added showmanyc +- added setbuf, with support for unbuffered output via setbuf(0,0) +- a few bug fixes of stream behavior +- gzipped output file opened with default compression level instead of maximum level +- setcompressionlevel()/strategy() members replaced by single setcompression() + +The code is provided "as is", with the permission to use, copy, modify, distribute +and sell it for any purpose without fee. + +Ludwig Schwardt + + +DSP Lab +Electrical & Electronic Engineering Department +University of Stellenbosch +South Africa diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/iostream3/TODO b/software/scsi2sd-util/zlib-1.2.8/contrib/iostream3/TODO new file mode 100644 index 0000000..7032f97 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/iostream3/TODO @@ -0,0 +1,17 @@ +Possible upgrades to gzfilebuf: + +- The ability to do putback (e.g. putbackfail) + +- The ability to seek (zlib supports this, but could be slow/tricky) + +- Simultaneous read/write access (does it make sense?) + +- Support for ios_base::ate open mode + +- Locale support? + +- Check public interface to see which calls give problems + (due to dependence on library internals) + +- Override operator<<(ostream&, gzfilebuf*) to allow direct copying + of stream buffer to stream ( i.e. os << is.rdbuf(); ) diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/iostream3/test.cc b/software/scsi2sd-util/zlib-1.2.8/contrib/iostream3/test.cc new file mode 100644 index 0000000..9423533 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/iostream3/test.cc @@ -0,0 +1,50 @@ +/* + * Test program for gzifstream and gzofstream + * + * by Ludwig Schwardt + * original version by Kevin Ruland + */ + +#include "zfstream.h" +#include // for cout + +int main() { + + gzofstream outf; + gzifstream inf; + char buf[80]; + + outf.open("test1.txt.gz"); + outf << "The quick brown fox sidestepped the lazy canine\n" + << 1.3 << "\nPlan " << 9 << std::endl; + outf.close(); + std::cout << "Wrote the following message to 'test1.txt.gz' (check with zcat or zless):\n" + << "The quick brown fox sidestepped the lazy canine\n" + << 1.3 << "\nPlan " << 9 << std::endl; + + std::cout << "\nReading 'test1.txt.gz' (buffered) produces:\n"; + inf.open("test1.txt.gz"); + while (inf.getline(buf,80,'\n')) { + std::cout << buf << "\t(" << inf.rdbuf()->in_avail() << " chars left in buffer)\n"; + } + inf.close(); + + outf.rdbuf()->pubsetbuf(0,0); + outf.open("test2.txt.gz"); + outf << setcompression(Z_NO_COMPRESSION) + << "The quick brown fox sidestepped the lazy canine\n" + << 1.3 << "\nPlan " << 9 << std::endl; + outf.close(); + std::cout << "\nWrote the same message to 'test2.txt.gz' in uncompressed form"; + + std::cout << "\nReading 'test2.txt.gz' (unbuffered) produces:\n"; + inf.rdbuf()->pubsetbuf(0,0); + inf.open("test2.txt.gz"); + while (inf.getline(buf,80,'\n')) { + std::cout << buf << "\t(" << inf.rdbuf()->in_avail() << " chars left in buffer)\n"; + } + inf.close(); + + return 0; + +} diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/iostream3/zfstream.cc b/software/scsi2sd-util/zlib-1.2.8/contrib/iostream3/zfstream.cc new file mode 100644 index 0000000..94eb933 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/iostream3/zfstream.cc @@ -0,0 +1,479 @@ +/* + * A C++ I/O streams interface to the zlib gz* functions + * + * by Ludwig Schwardt + * original version by Kevin Ruland + * + * This version is standard-compliant and compatible with gcc 3.x. + */ + +#include "zfstream.h" +#include // for strcpy, strcat, strlen (mode strings) +#include // for BUFSIZ + +// Internal buffer sizes (default and "unbuffered" versions) +#define BIGBUFSIZE BUFSIZ +#define SMALLBUFSIZE 1 + +/*****************************************************************************/ + +// Default constructor +gzfilebuf::gzfilebuf() +: file(NULL), io_mode(std::ios_base::openmode(0)), own_fd(false), + buffer(NULL), buffer_size(BIGBUFSIZE), own_buffer(true) +{ + // No buffers to start with + this->disable_buffer(); +} + +// Destructor +gzfilebuf::~gzfilebuf() +{ + // Sync output buffer and close only if responsible for file + // (i.e. attached streams should be left open at this stage) + this->sync(); + if (own_fd) + this->close(); + // Make sure internal buffer is deallocated + this->disable_buffer(); +} + +// Set compression level and strategy +int +gzfilebuf::setcompression(int comp_level, + int comp_strategy) +{ + return gzsetparams(file, comp_level, comp_strategy); +} + +// Open gzipped file +gzfilebuf* +gzfilebuf::open(const char *name, + std::ios_base::openmode mode) +{ + // Fail if file already open + if (this->is_open()) + return NULL; + // Don't support simultaneous read/write access (yet) + if ((mode & std::ios_base::in) && (mode & std::ios_base::out)) + return NULL; + + // Build mode string for gzopen and check it [27.8.1.3.2] + char char_mode[6] = "\0\0\0\0\0"; + if (!this->open_mode(mode, char_mode)) + return NULL; + + // Attempt to open file + if ((file = gzopen(name, char_mode)) == NULL) + return NULL; + + // On success, allocate internal buffer and set flags + this->enable_buffer(); + io_mode = mode; + own_fd = true; + return this; +} + +// Attach to gzipped file +gzfilebuf* +gzfilebuf::attach(int fd, + std::ios_base::openmode mode) +{ + // Fail if file already open + if (this->is_open()) + return NULL; + // Don't support simultaneous read/write access (yet) + if ((mode & std::ios_base::in) && (mode & std::ios_base::out)) + return NULL; + + // Build mode string for gzdopen and check it [27.8.1.3.2] + char char_mode[6] = "\0\0\0\0\0"; + if (!this->open_mode(mode, char_mode)) + return NULL; + + // Attempt to attach to file + if ((file = gzdopen(fd, char_mode)) == NULL) + return NULL; + + // On success, allocate internal buffer and set flags + this->enable_buffer(); + io_mode = mode; + own_fd = false; + return this; +} + +// Close gzipped file +gzfilebuf* +gzfilebuf::close() +{ + // Fail immediately if no file is open + if (!this->is_open()) + return NULL; + // Assume success + gzfilebuf* retval = this; + // Attempt to sync and close gzipped file + if (this->sync() == -1) + retval = NULL; + if (gzclose(file) < 0) + retval = NULL; + // File is now gone anyway (postcondition [27.8.1.3.8]) + file = NULL; + own_fd = false; + // Destroy internal buffer if it exists + this->disable_buffer(); + return retval; +} + +/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */ + +// Convert int open mode to mode string +bool +gzfilebuf::open_mode(std::ios_base::openmode mode, + char* c_mode) const +{ + bool testb = mode & std::ios_base::binary; + bool testi = mode & std::ios_base::in; + bool testo = mode & std::ios_base::out; + bool testt = mode & std::ios_base::trunc; + bool testa = mode & std::ios_base::app; + + // Check for valid flag combinations - see [27.8.1.3.2] (Table 92) + // Original zfstream hardcoded the compression level to maximum here... + // Double the time for less than 1% size improvement seems + // excessive though - keeping it at the default level + // To change back, just append "9" to the next three mode strings + if (!testi && testo && !testt && !testa) + strcpy(c_mode, "w"); + if (!testi && testo && !testt && testa) + strcpy(c_mode, "a"); + if (!testi && testo && testt && !testa) + strcpy(c_mode, "w"); + if (testi && !testo && !testt && !testa) + strcpy(c_mode, "r"); + // No read/write mode yet +// if (testi && testo && !testt && !testa) +// strcpy(c_mode, "r+"); +// if (testi && testo && testt && !testa) +// strcpy(c_mode, "w+"); + + // Mode string should be empty for invalid combination of flags + if (strlen(c_mode) == 0) + return false; + if (testb) + strcat(c_mode, "b"); + return true; +} + +// Determine number of characters in internal get buffer +std::streamsize +gzfilebuf::showmanyc() +{ + // Calls to underflow will fail if file not opened for reading + if (!this->is_open() || !(io_mode & std::ios_base::in)) + return -1; + // Make sure get area is in use + if (this->gptr() && (this->gptr() < this->egptr())) + return std::streamsize(this->egptr() - this->gptr()); + else + return 0; +} + +// Fill get area from gzipped file +gzfilebuf::int_type +gzfilebuf::underflow() +{ + // If something is left in the get area by chance, return it + // (this shouldn't normally happen, as underflow is only supposed + // to be called when gptr >= egptr, but it serves as error check) + if (this->gptr() && (this->gptr() < this->egptr())) + return traits_type::to_int_type(*(this->gptr())); + + // If the file hasn't been opened for reading, produce error + if (!this->is_open() || !(io_mode & std::ios_base::in)) + return traits_type::eof(); + + // Attempt to fill internal buffer from gzipped file + // (buffer must be guaranteed to exist...) + int bytes_read = gzread(file, buffer, buffer_size); + // Indicates error or EOF + if (bytes_read <= 0) + { + // Reset get area + this->setg(buffer, buffer, buffer); + return traits_type::eof(); + } + // Make all bytes read from file available as get area + this->setg(buffer, buffer, buffer + bytes_read); + + // Return next character in get area + return traits_type::to_int_type(*(this->gptr())); +} + +// Write put area to gzipped file +gzfilebuf::int_type +gzfilebuf::overflow(int_type c) +{ + // Determine whether put area is in use + if (this->pbase()) + { + // Double-check pointer range + if (this->pptr() > this->epptr() || this->pptr() < this->pbase()) + return traits_type::eof(); + // Add extra character to buffer if not EOF + if (!traits_type::eq_int_type(c, traits_type::eof())) + { + *(this->pptr()) = traits_type::to_char_type(c); + this->pbump(1); + } + // Number of characters to write to file + int bytes_to_write = this->pptr() - this->pbase(); + // Overflow doesn't fail if nothing is to be written + if (bytes_to_write > 0) + { + // If the file hasn't been opened for writing, produce error + if (!this->is_open() || !(io_mode & std::ios_base::out)) + return traits_type::eof(); + // If gzipped file won't accept all bytes written to it, fail + if (gzwrite(file, this->pbase(), bytes_to_write) != bytes_to_write) + return traits_type::eof(); + // Reset next pointer to point to pbase on success + this->pbump(-bytes_to_write); + } + } + // Write extra character to file if not EOF + else if (!traits_type::eq_int_type(c, traits_type::eof())) + { + // If the file hasn't been opened for writing, produce error + if (!this->is_open() || !(io_mode & std::ios_base::out)) + return traits_type::eof(); + // Impromptu char buffer (allows "unbuffered" output) + char_type last_char = traits_type::to_char_type(c); + // If gzipped file won't accept this character, fail + if (gzwrite(file, &last_char, 1) != 1) + return traits_type::eof(); + } + + // If you got here, you have succeeded (even if c was EOF) + // The return value should therefore be non-EOF + if (traits_type::eq_int_type(c, traits_type::eof())) + return traits_type::not_eof(c); + else + return c; +} + +// Assign new buffer +std::streambuf* +gzfilebuf::setbuf(char_type* p, + std::streamsize n) +{ + // First make sure stuff is sync'ed, for safety + if (this->sync() == -1) + return NULL; + // If buffering is turned off on purpose via setbuf(0,0), still allocate one... + // "Unbuffered" only really refers to put [27.8.1.4.10], while get needs at + // least a buffer of size 1 (very inefficient though, therefore make it bigger?) + // This follows from [27.5.2.4.3]/12 (gptr needs to point at something, it seems) + if (!p || !n) + { + // Replace existing buffer (if any) with small internal buffer + this->disable_buffer(); + buffer = NULL; + buffer_size = 0; + own_buffer = true; + this->enable_buffer(); + } + else + { + // Replace existing buffer (if any) with external buffer + this->disable_buffer(); + buffer = p; + buffer_size = n; + own_buffer = false; + this->enable_buffer(); + } + return this; +} + +// Write put area to gzipped file (i.e. ensures that put area is empty) +int +gzfilebuf::sync() +{ + return traits_type::eq_int_type(this->overflow(), traits_type::eof()) ? -1 : 0; +} + +/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */ + +// Allocate internal buffer +void +gzfilebuf::enable_buffer() +{ + // If internal buffer required, allocate one + if (own_buffer && !buffer) + { + // Check for buffered vs. "unbuffered" + if (buffer_size > 0) + { + // Allocate internal buffer + buffer = new char_type[buffer_size]; + // Get area starts empty and will be expanded by underflow as need arises + this->setg(buffer, buffer, buffer); + // Setup entire internal buffer as put area. + // The one-past-end pointer actually points to the last element of the buffer, + // so that overflow(c) can safely add the extra character c to the sequence. + // These pointers remain in place for the duration of the buffer + this->setp(buffer, buffer + buffer_size - 1); + } + else + { + // Even in "unbuffered" case, (small?) get buffer is still required + buffer_size = SMALLBUFSIZE; + buffer = new char_type[buffer_size]; + this->setg(buffer, buffer, buffer); + // "Unbuffered" means no put buffer + this->setp(0, 0); + } + } + else + { + // If buffer already allocated, reset buffer pointers just to make sure no + // stale chars are lying around + this->setg(buffer, buffer, buffer); + this->setp(buffer, buffer + buffer_size - 1); + } +} + +// Destroy internal buffer +void +gzfilebuf::disable_buffer() +{ + // If internal buffer exists, deallocate it + if (own_buffer && buffer) + { + // Preserve unbuffered status by zeroing size + if (!this->pbase()) + buffer_size = 0; + delete[] buffer; + buffer = NULL; + this->setg(0, 0, 0); + this->setp(0, 0); + } + else + { + // Reset buffer pointers to initial state if external buffer exists + this->setg(buffer, buffer, buffer); + if (buffer) + this->setp(buffer, buffer + buffer_size - 1); + else + this->setp(0, 0); + } +} + +/*****************************************************************************/ + +// Default constructor initializes stream buffer +gzifstream::gzifstream() +: std::istream(NULL), sb() +{ this->init(&sb); } + +// Initialize stream buffer and open file +gzifstream::gzifstream(const char* name, + std::ios_base::openmode mode) +: std::istream(NULL), sb() +{ + this->init(&sb); + this->open(name, mode); +} + +// Initialize stream buffer and attach to file +gzifstream::gzifstream(int fd, + std::ios_base::openmode mode) +: std::istream(NULL), sb() +{ + this->init(&sb); + this->attach(fd, mode); +} + +// Open file and go into fail() state if unsuccessful +void +gzifstream::open(const char* name, + std::ios_base::openmode mode) +{ + if (!sb.open(name, mode | std::ios_base::in)) + this->setstate(std::ios_base::failbit); + else + this->clear(); +} + +// Attach to file and go into fail() state if unsuccessful +void +gzifstream::attach(int fd, + std::ios_base::openmode mode) +{ + if (!sb.attach(fd, mode | std::ios_base::in)) + this->setstate(std::ios_base::failbit); + else + this->clear(); +} + +// Close file +void +gzifstream::close() +{ + if (!sb.close()) + this->setstate(std::ios_base::failbit); +} + +/*****************************************************************************/ + +// Default constructor initializes stream buffer +gzofstream::gzofstream() +: std::ostream(NULL), sb() +{ this->init(&sb); } + +// Initialize stream buffer and open file +gzofstream::gzofstream(const char* name, + std::ios_base::openmode mode) +: std::ostream(NULL), sb() +{ + this->init(&sb); + this->open(name, mode); +} + +// Initialize stream buffer and attach to file +gzofstream::gzofstream(int fd, + std::ios_base::openmode mode) +: std::ostream(NULL), sb() +{ + this->init(&sb); + this->attach(fd, mode); +} + +// Open file and go into fail() state if unsuccessful +void +gzofstream::open(const char* name, + std::ios_base::openmode mode) +{ + if (!sb.open(name, mode | std::ios_base::out)) + this->setstate(std::ios_base::failbit); + else + this->clear(); +} + +// Attach to file and go into fail() state if unsuccessful +void +gzofstream::attach(int fd, + std::ios_base::openmode mode) +{ + if (!sb.attach(fd, mode | std::ios_base::out)) + this->setstate(std::ios_base::failbit); + else + this->clear(); +} + +// Close file +void +gzofstream::close() +{ + if (!sb.close()) + this->setstate(std::ios_base::failbit); +} diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/iostream3/zfstream.h b/software/scsi2sd-util/zlib-1.2.8/contrib/iostream3/zfstream.h new file mode 100644 index 0000000..8574479 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/iostream3/zfstream.h @@ -0,0 +1,466 @@ +/* + * A C++ I/O streams interface to the zlib gz* functions + * + * by Ludwig Schwardt + * original version by Kevin Ruland + * + * This version is standard-compliant and compatible with gcc 3.x. + */ + +#ifndef ZFSTREAM_H +#define ZFSTREAM_H + +#include // not iostream, since we don't need cin/cout +#include +#include "zlib.h" + +/*****************************************************************************/ + +/** + * @brief Gzipped file stream buffer class. + * + * This class implements basic_filebuf for gzipped files. It doesn't yet support + * seeking (allowed by zlib but slow/limited), putback and read/write access + * (tricky). Otherwise, it attempts to be a drop-in replacement for the standard + * file streambuf. +*/ +class gzfilebuf : public std::streambuf +{ +public: + // Default constructor. + gzfilebuf(); + + // Destructor. + virtual + ~gzfilebuf(); + + /** + * @brief Set compression level and strategy on the fly. + * @param comp_level Compression level (see zlib.h for allowed values) + * @param comp_strategy Compression strategy (see zlib.h for allowed values) + * @return Z_OK on success, Z_STREAM_ERROR otherwise. + * + * Unfortunately, these parameters cannot be modified separately, as the + * previous zfstream version assumed. Since the strategy is seldom changed, + * it can default and setcompression(level) then becomes like the old + * setcompressionlevel(level). + */ + int + setcompression(int comp_level, + int comp_strategy = Z_DEFAULT_STRATEGY); + + /** + * @brief Check if file is open. + * @return True if file is open. + */ + bool + is_open() const { return (file != NULL); } + + /** + * @brief Open gzipped file. + * @param name File name. + * @param mode Open mode flags. + * @return @c this on success, NULL on failure. + */ + gzfilebuf* + open(const char* name, + std::ios_base::openmode mode); + + /** + * @brief Attach to already open gzipped file. + * @param fd File descriptor. + * @param mode Open mode flags. + * @return @c this on success, NULL on failure. + */ + gzfilebuf* + attach(int fd, + std::ios_base::openmode mode); + + /** + * @brief Close gzipped file. + * @return @c this on success, NULL on failure. + */ + gzfilebuf* + close(); + +protected: + /** + * @brief Convert ios open mode int to mode string used by zlib. + * @return True if valid mode flag combination. + */ + bool + open_mode(std::ios_base::openmode mode, + char* c_mode) const; + + /** + * @brief Number of characters available in stream buffer. + * @return Number of characters. + * + * This indicates number of characters in get area of stream buffer. + * These characters can be read without accessing the gzipped file. + */ + virtual std::streamsize + showmanyc(); + + /** + * @brief Fill get area from gzipped file. + * @return First character in get area on success, EOF on error. + * + * This actually reads characters from gzipped file to stream + * buffer. Always buffered. + */ + virtual int_type + underflow(); + + /** + * @brief Write put area to gzipped file. + * @param c Extra character to add to buffer contents. + * @return Non-EOF on success, EOF on error. + * + * This actually writes characters in stream buffer to + * gzipped file. With unbuffered output this is done one + * character at a time. + */ + virtual int_type + overflow(int_type c = traits_type::eof()); + + /** + * @brief Installs external stream buffer. + * @param p Pointer to char buffer. + * @param n Size of external buffer. + * @return @c this on success, NULL on failure. + * + * Call setbuf(0,0) to enable unbuffered output. + */ + virtual std::streambuf* + setbuf(char_type* p, + std::streamsize n); + + /** + * @brief Flush stream buffer to file. + * @return 0 on success, -1 on error. + * + * This calls underflow(EOF) to do the job. + */ + virtual int + sync(); + +// +// Some future enhancements +// +// virtual int_type uflow(); +// virtual int_type pbackfail(int_type c = traits_type::eof()); +// virtual pos_type +// seekoff(off_type off, +// std::ios_base::seekdir way, +// std::ios_base::openmode mode = std::ios_base::in|std::ios_base::out); +// virtual pos_type +// seekpos(pos_type sp, +// std::ios_base::openmode mode = std::ios_base::in|std::ios_base::out); + +private: + /** + * @brief Allocate internal buffer. + * + * This function is safe to call multiple times. It will ensure + * that a proper internal buffer exists if it is required. If the + * buffer already exists or is external, the buffer pointers will be + * reset to their original state. + */ + void + enable_buffer(); + + /** + * @brief Destroy internal buffer. + * + * This function is safe to call multiple times. It will ensure + * that the internal buffer is deallocated if it exists. In any + * case, it will also reset the buffer pointers. + */ + void + disable_buffer(); + + /** + * Underlying file pointer. + */ + gzFile file; + + /** + * Mode in which file was opened. + */ + std::ios_base::openmode io_mode; + + /** + * @brief True if this object owns file descriptor. + * + * This makes the class responsible for closing the file + * upon destruction. + */ + bool own_fd; + + /** + * @brief Stream buffer. + * + * For simplicity this remains allocated on the free store for the + * entire life span of the gzfilebuf object, unless replaced by setbuf. + */ + char_type* buffer; + + /** + * @brief Stream buffer size. + * + * Defaults to system default buffer size (typically 8192 bytes). + * Modified by setbuf. + */ + std::streamsize buffer_size; + + /** + * @brief True if this object owns stream buffer. + * + * This makes the class responsible for deleting the buffer + * upon destruction. + */ + bool own_buffer; +}; + +/*****************************************************************************/ + +/** + * @brief Gzipped file input stream class. + * + * This class implements ifstream for gzipped files. Seeking and putback + * is not supported yet. +*/ +class gzifstream : public std::istream +{ +public: + // Default constructor + gzifstream(); + + /** + * @brief Construct stream on gzipped file to be opened. + * @param name File name. + * @param mode Open mode flags (forced to contain ios::in). + */ + explicit + gzifstream(const char* name, + std::ios_base::openmode mode = std::ios_base::in); + + /** + * @brief Construct stream on already open gzipped file. + * @param fd File descriptor. + * @param mode Open mode flags (forced to contain ios::in). + */ + explicit + gzifstream(int fd, + std::ios_base::openmode mode = std::ios_base::in); + + /** + * Obtain underlying stream buffer. + */ + gzfilebuf* + rdbuf() const + { return const_cast(&sb); } + + /** + * @brief Check if file is open. + * @return True if file is open. + */ + bool + is_open() { return sb.is_open(); } + + /** + * @brief Open gzipped file. + * @param name File name. + * @param mode Open mode flags (forced to contain ios::in). + * + * Stream will be in state good() if file opens successfully; + * otherwise in state fail(). This differs from the behavior of + * ifstream, which never sets the state to good() and therefore + * won't allow you to reuse the stream for a second file unless + * you manually clear() the state. The choice is a matter of + * convenience. + */ + void + open(const char* name, + std::ios_base::openmode mode = std::ios_base::in); + + /** + * @brief Attach to already open gzipped file. + * @param fd File descriptor. + * @param mode Open mode flags (forced to contain ios::in). + * + * Stream will be in state good() if attach succeeded; otherwise + * in state fail(). + */ + void + attach(int fd, + std::ios_base::openmode mode = std::ios_base::in); + + /** + * @brief Close gzipped file. + * + * Stream will be in state fail() if close failed. + */ + void + close(); + +private: + /** + * Underlying stream buffer. + */ + gzfilebuf sb; +}; + +/*****************************************************************************/ + +/** + * @brief Gzipped file output stream class. + * + * This class implements ofstream for gzipped files. Seeking and putback + * is not supported yet. +*/ +class gzofstream : public std::ostream +{ +public: + // Default constructor + gzofstream(); + + /** + * @brief Construct stream on gzipped file to be opened. + * @param name File name. + * @param mode Open mode flags (forced to contain ios::out). + */ + explicit + gzofstream(const char* name, + std::ios_base::openmode mode = std::ios_base::out); + + /** + * @brief Construct stream on already open gzipped file. + * @param fd File descriptor. + * @param mode Open mode flags (forced to contain ios::out). + */ + explicit + gzofstream(int fd, + std::ios_base::openmode mode = std::ios_base::out); + + /** + * Obtain underlying stream buffer. + */ + gzfilebuf* + rdbuf() const + { return const_cast(&sb); } + + /** + * @brief Check if file is open. + * @return True if file is open. + */ + bool + is_open() { return sb.is_open(); } + + /** + * @brief Open gzipped file. + * @param name File name. + * @param mode Open mode flags (forced to contain ios::out). + * + * Stream will be in state good() if file opens successfully; + * otherwise in state fail(). This differs from the behavior of + * ofstream, which never sets the state to good() and therefore + * won't allow you to reuse the stream for a second file unless + * you manually clear() the state. The choice is a matter of + * convenience. + */ + void + open(const char* name, + std::ios_base::openmode mode = std::ios_base::out); + + /** + * @brief Attach to already open gzipped file. + * @param fd File descriptor. + * @param mode Open mode flags (forced to contain ios::out). + * + * Stream will be in state good() if attach succeeded; otherwise + * in state fail(). + */ + void + attach(int fd, + std::ios_base::openmode mode = std::ios_base::out); + + /** + * @brief Close gzipped file. + * + * Stream will be in state fail() if close failed. + */ + void + close(); + +private: + /** + * Underlying stream buffer. + */ + gzfilebuf sb; +}; + +/*****************************************************************************/ + +/** + * @brief Gzipped file output stream manipulator class. + * + * This class defines a two-argument manipulator for gzofstream. It is used + * as base for the setcompression(int,int) manipulator. +*/ +template + class gzomanip2 + { + public: + // Allows insertor to peek at internals + template + friend gzofstream& + operator<<(gzofstream&, + const gzomanip2&); + + // Constructor + gzomanip2(gzofstream& (*f)(gzofstream&, T1, T2), + T1 v1, + T2 v2); + private: + // Underlying manipulator function + gzofstream& + (*func)(gzofstream&, T1, T2); + + // Arguments for manipulator function + T1 val1; + T2 val2; + }; + +/*****************************************************************************/ + +// Manipulator function thunks through to stream buffer +inline gzofstream& +setcompression(gzofstream &gzs, int l, int s = Z_DEFAULT_STRATEGY) +{ + (gzs.rdbuf())->setcompression(l, s); + return gzs; +} + +// Manipulator constructor stores arguments +template + inline + gzomanip2::gzomanip2(gzofstream &(*f)(gzofstream &, T1, T2), + T1 v1, + T2 v2) + : func(f), val1(v1), val2(v2) + { } + +// Insertor applies underlying manipulator function to stream +template + inline gzofstream& + operator<<(gzofstream& s, const gzomanip2& m) + { return (*m.func)(s, m.val1, m.val2); } + +// Insert this onto stream to simplify setting of compression level +inline gzomanip2 +setcompression(int l, int s = Z_DEFAULT_STRATEGY) +{ return gzomanip2(&setcompression, l, s); } + +#endif // ZFSTREAM_H diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/masmx64/bld_ml64.bat b/software/scsi2sd-util/zlib-1.2.8/contrib/masmx64/bld_ml64.bat new file mode 100644 index 0000000..f74bcef --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/masmx64/bld_ml64.bat @@ -0,0 +1,2 @@ +ml64.exe /Flinffasx64 /c /Zi inffasx64.asm +ml64.exe /Flgvmat64 /c /Zi gvmat64.asm diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/masmx64/gvmat64.asm b/software/scsi2sd-util/zlib-1.2.8/contrib/masmx64/gvmat64.asm new file mode 100644 index 0000000..c1817f1 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/masmx64/gvmat64.asm @@ -0,0 +1,553 @@ +;uInt longest_match_x64( +; deflate_state *s, +; IPos cur_match); /* current match */ + +; gvmat64.asm -- Asm portion of the optimized longest_match for 32 bits x86_64 +; (AMD64 on Athlon 64, Opteron, Phenom +; and Intel EM64T on Pentium 4 with EM64T, Pentium D, Core 2 Duo, Core I5/I7) +; Copyright (C) 1995-2010 Jean-loup Gailly, Brian Raiter and Gilles Vollant. +; +; File written by Gilles Vollant, by converting to assembly the longest_match +; from Jean-loup Gailly in deflate.c of zLib and infoZip zip. +; +; and by taking inspiration on asm686 with masm, optimised assembly code +; from Brian Raiter, written 1998 +; +; This software is provided 'as-is', without any express or implied +; warranty. In no event will the authors be held liable for any damages +; arising from the use of this software. +; +; Permission is granted to anyone to use this software for any purpose, +; including commercial applications, and to alter it and redistribute it +; freely, subject to the following restrictions: +; +; 1. The origin of this software must not be misrepresented; you must not +; claim that you wrote the original software. If you use this software +; in a product, an acknowledgment in the product documentation would be +; appreciated but is not required. +; 2. Altered source versions must be plainly marked as such, and must not be +; misrepresented as being the original software +; 3. This notice may not be removed or altered from any source distribution. +; +; +; +; http://www.zlib.net +; http://www.winimage.com/zLibDll +; http://www.muppetlabs.com/~breadbox/software/assembly.html +; +; to compile this file for infozip Zip, I use option: +; ml64.exe /Flgvmat64 /c /Zi /DINFOZIP gvmat64.asm +; +; to compile this file for zLib, I use option: +; ml64.exe /Flgvmat64 /c /Zi gvmat64.asm +; Be carrefull to adapt zlib1222add below to your version of zLib +; (if you use a version of zLib before 1.0.4 or after 1.2.2.2, change +; value of zlib1222add later) +; +; This file compile with Microsoft Macro Assembler (x64) for AMD64 +; +; ml64.exe is given with Visual Studio 2005/2008/2010 and Windows WDK +; +; (you can get Windows WDK with ml64 for AMD64 from +; http://www.microsoft.com/whdc/Devtools/wdk/default.mspx for low price) +; + + +;uInt longest_match(s, cur_match) +; deflate_state *s; +; IPos cur_match; /* current match */ +.code +longest_match PROC + + +;LocalVarsSize equ 88 + LocalVarsSize equ 72 + +; register used : rax,rbx,rcx,rdx,rsi,rdi,r8,r9,r10,r11,r12 +; free register : r14,r15 +; register can be saved : rsp + + chainlenwmask equ rsp + 8 - LocalVarsSize ; high word: current chain len + ; low word: s->wmask +;window equ rsp + xx - LocalVarsSize ; local copy of s->window ; stored in r10 +;windowbestlen equ rsp + xx - LocalVarsSize ; s->window + bestlen , use r10+r11 +;scanstart equ rsp + xx - LocalVarsSize ; first two bytes of string ; stored in r12w +;scanend equ rsp + xx - LocalVarsSize ; last two bytes of string use ebx +;scanalign equ rsp + xx - LocalVarsSize ; dword-misalignment of string r13 +;bestlen equ rsp + xx - LocalVarsSize ; size of best match so far -> r11d +;scan equ rsp + xx - LocalVarsSize ; ptr to string wanting match -> r9 +IFDEF INFOZIP +ELSE + nicematch equ (rsp + 16 - LocalVarsSize) ; a good enough match size +ENDIF + +save_rdi equ rsp + 24 - LocalVarsSize +save_rsi equ rsp + 32 - LocalVarsSize +save_rbx equ rsp + 40 - LocalVarsSize +save_rbp equ rsp + 48 - LocalVarsSize +save_r12 equ rsp + 56 - LocalVarsSize +save_r13 equ rsp + 64 - LocalVarsSize +;save_r14 equ rsp + 72 - LocalVarsSize +;save_r15 equ rsp + 80 - LocalVarsSize + + +; summary of register usage +; scanend ebx +; scanendw bx +; chainlenwmask edx +; curmatch rsi +; curmatchd esi +; windowbestlen r8 +; scanalign r9 +; scanalignd r9d +; window r10 +; bestlen r11 +; bestlend r11d +; scanstart r12d +; scanstartw r12w +; scan r13 +; nicematch r14d +; limit r15 +; limitd r15d +; prev rcx + +; all the +4 offsets are due to the addition of pending_buf_size (in zlib +; in the deflate_state structure since the asm code was first written +; (if you compile with zlib 1.0.4 or older, remove the +4). +; Note : these value are good with a 8 bytes boundary pack structure + + + MAX_MATCH equ 258 + MIN_MATCH equ 3 + MIN_LOOKAHEAD equ (MAX_MATCH+MIN_MATCH+1) + + +;;; Offsets for fields in the deflate_state structure. These numbers +;;; are calculated from the definition of deflate_state, with the +;;; assumption that the compiler will dword-align the fields. (Thus, +;;; changing the definition of deflate_state could easily cause this +;;; program to crash horribly, without so much as a warning at +;;; compile time. Sigh.) + +; all the +zlib1222add offsets are due to the addition of fields +; in zlib in the deflate_state structure since the asm code was first written +; (if you compile with zlib 1.0.4 or older, use "zlib1222add equ (-4)"). +; (if you compile with zlib between 1.0.5 and 1.2.2.1, use "zlib1222add equ 0"). +; if you compile with zlib 1.2.2.2 or later , use "zlib1222add equ 8"). + + +IFDEF INFOZIP + +_DATA SEGMENT +COMM window_size:DWORD +; WMask ; 7fff +COMM window:BYTE:010040H +COMM prev:WORD:08000H +; MatchLen : unused +; PrevMatch : unused +COMM strstart:DWORD +COMM match_start:DWORD +; Lookahead : ignore +COMM prev_length:DWORD ; PrevLen +COMM max_chain_length:DWORD +COMM good_match:DWORD +COMM nice_match:DWORD +prev_ad equ OFFSET prev +window_ad equ OFFSET window +nicematch equ nice_match +_DATA ENDS +WMask equ 07fffh + +ELSE + + IFNDEF zlib1222add + zlib1222add equ 8 + ENDIF +dsWSize equ 56+zlib1222add+(zlib1222add/2) +dsWMask equ 64+zlib1222add+(zlib1222add/2) +dsWindow equ 72+zlib1222add +dsPrev equ 88+zlib1222add +dsMatchLen equ 128+zlib1222add +dsPrevMatch equ 132+zlib1222add +dsStrStart equ 140+zlib1222add +dsMatchStart equ 144+zlib1222add +dsLookahead equ 148+zlib1222add +dsPrevLen equ 152+zlib1222add +dsMaxChainLen equ 156+zlib1222add +dsGoodMatch equ 172+zlib1222add +dsNiceMatch equ 176+zlib1222add + +window_size equ [ rcx + dsWSize] +WMask equ [ rcx + dsWMask] +window_ad equ [ rcx + dsWindow] +prev_ad equ [ rcx + dsPrev] +strstart equ [ rcx + dsStrStart] +match_start equ [ rcx + dsMatchStart] +Lookahead equ [ rcx + dsLookahead] ; 0ffffffffh on infozip +prev_length equ [ rcx + dsPrevLen] +max_chain_length equ [ rcx + dsMaxChainLen] +good_match equ [ rcx + dsGoodMatch] +nice_match equ [ rcx + dsNiceMatch] +ENDIF + +; parameter 1 in r8(deflate state s), param 2 in rdx (cur match) + +; see http://weblogs.asp.net/oldnewthing/archive/2004/01/14/58579.aspx and +; http://msdn.microsoft.com/library/en-us/kmarch/hh/kmarch/64bitAMD_8e951dd2-ee77-4728-8702-55ce4b5dd24a.xml.asp +; +; All registers must be preserved across the call, except for +; rax, rcx, rdx, r8, r9, r10, and r11, which are scratch. + + + +;;; Save registers that the compiler may be using, and adjust esp to +;;; make room for our stack frame. + + +;;; Retrieve the function arguments. r8d will hold cur_match +;;; throughout the entire function. edx will hold the pointer to the +;;; deflate_state structure during the function's setup (before +;;; entering the main loop. + +; parameter 1 in rcx (deflate_state* s), param 2 in edx -> r8 (cur match) + +; this clear high 32 bits of r8, which can be garbage in both r8 and rdx + + mov [save_rdi],rdi + mov [save_rsi],rsi + mov [save_rbx],rbx + mov [save_rbp],rbp +IFDEF INFOZIP + mov r8d,ecx +ELSE + mov r8d,edx +ENDIF + mov [save_r12],r12 + mov [save_r13],r13 +; mov [save_r14],r14 +; mov [save_r15],r15 + + +;;; uInt wmask = s->w_mask; +;;; unsigned chain_length = s->max_chain_length; +;;; if (s->prev_length >= s->good_match) { +;;; chain_length >>= 2; +;;; } + + mov edi, prev_length + mov esi, good_match + mov eax, WMask + mov ebx, max_chain_length + cmp edi, esi + jl LastMatchGood + shr ebx, 2 +LastMatchGood: + +;;; chainlen is decremented once beforehand so that the function can +;;; use the sign flag instead of the zero flag for the exit test. +;;; It is then shifted into the high word, to make room for the wmask +;;; value, which it will always accompany. + + dec ebx + shl ebx, 16 + or ebx, eax + +;;; on zlib only +;;; if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead; + +IFDEF INFOZIP + mov [chainlenwmask], ebx +; on infozip nice_match = [nice_match] +ELSE + mov eax, nice_match + mov [chainlenwmask], ebx + mov r10d, Lookahead + cmp r10d, eax + cmovnl r10d, eax + mov [nicematch],r10d +ENDIF + +;;; register Bytef *scan = s->window + s->strstart; + mov r10, window_ad + mov ebp, strstart + lea r13, [r10 + rbp] + +;;; Determine how many bytes the scan ptr is off from being +;;; dword-aligned. + + mov r9,r13 + neg r13 + and r13,3 + +;;; IPos limit = s->strstart > (IPos)MAX_DIST(s) ? +;;; s->strstart - (IPos)MAX_DIST(s) : NIL; +IFDEF INFOZIP + mov eax,07efah ; MAX_DIST = (WSIZE-MIN_LOOKAHEAD) (0x8000-(3+8+1)) +ELSE + mov eax, window_size + sub eax, MIN_LOOKAHEAD +ENDIF + xor edi,edi + sub ebp, eax + + mov r11d, prev_length + + cmovng ebp,edi + +;;; int best_len = s->prev_length; + + +;;; Store the sum of s->window + best_len in esi locally, and in esi. + + lea rsi,[r10+r11] + +;;; register ush scan_start = *(ushf*)scan; +;;; register ush scan_end = *(ushf*)(scan+best_len-1); +;;; Posf *prev = s->prev; + + movzx r12d,word ptr [r9] + movzx ebx, word ptr [r9 + r11 - 1] + + mov rdi, prev_ad + +;;; Jump into the main loop. + + mov edx, [chainlenwmask] + + cmp bx,word ptr [rsi + r8 - 1] + jz LookupLoopIsZero + +LookupLoop1: + and r8d, edx + + movzx r8d, word ptr [rdi + r8*2] + cmp r8d, ebp + jbe LeaveNow + sub edx, 00010000h + js LeaveNow + +LoopEntry1: + cmp bx,word ptr [rsi + r8 - 1] + jz LookupLoopIsZero + +LookupLoop2: + and r8d, edx + + movzx r8d, word ptr [rdi + r8*2] + cmp r8d, ebp + jbe LeaveNow + sub edx, 00010000h + js LeaveNow + +LoopEntry2: + cmp bx,word ptr [rsi + r8 - 1] + jz LookupLoopIsZero + +LookupLoop4: + and r8d, edx + + movzx r8d, word ptr [rdi + r8*2] + cmp r8d, ebp + jbe LeaveNow + sub edx, 00010000h + js LeaveNow + +LoopEntry4: + + cmp bx,word ptr [rsi + r8 - 1] + jnz LookupLoop1 + jmp LookupLoopIsZero + + +;;; do { +;;; match = s->window + cur_match; +;;; if (*(ushf*)(match+best_len-1) != scan_end || +;;; *(ushf*)match != scan_start) continue; +;;; [...] +;;; } while ((cur_match = prev[cur_match & wmask]) > limit +;;; && --chain_length != 0); +;;; +;;; Here is the inner loop of the function. The function will spend the +;;; majority of its time in this loop, and majority of that time will +;;; be spent in the first ten instructions. +;;; +;;; Within this loop: +;;; ebx = scanend +;;; r8d = curmatch +;;; edx = chainlenwmask - i.e., ((chainlen << 16) | wmask) +;;; esi = windowbestlen - i.e., (window + bestlen) +;;; edi = prev +;;; ebp = limit + +LookupLoop: + and r8d, edx + + movzx r8d, word ptr [rdi + r8*2] + cmp r8d, ebp + jbe LeaveNow + sub edx, 00010000h + js LeaveNow + +LoopEntry: + + cmp bx,word ptr [rsi + r8 - 1] + jnz LookupLoop1 +LookupLoopIsZero: + cmp r12w, word ptr [r10 + r8] + jnz LookupLoop1 + + +;;; Store the current value of chainlen. + mov [chainlenwmask], edx + +;;; Point edi to the string under scrutiny, and esi to the string we +;;; are hoping to match it up with. In actuality, esi and edi are +;;; both pointed (MAX_MATCH_8 - scanalign) bytes ahead, and edx is +;;; initialized to -(MAX_MATCH_8 - scanalign). + + lea rsi,[r8+r10] + mov rdx, 0fffffffffffffef8h; -(MAX_MATCH_8) + lea rsi, [rsi + r13 + 0108h] ;MAX_MATCH_8] + lea rdi, [r9 + r13 + 0108h] ;MAX_MATCH_8] + + prefetcht1 [rsi+rdx] + prefetcht1 [rdi+rdx] + + +;;; Test the strings for equality, 8 bytes at a time. At the end, +;;; adjust rdx so that it is offset to the exact byte that mismatched. +;;; +;;; We already know at this point that the first three bytes of the +;;; strings match each other, and they can be safely passed over before +;;; starting the compare loop. So what this code does is skip over 0-3 +;;; bytes, as much as necessary in order to dword-align the edi +;;; pointer. (rsi will still be misaligned three times out of four.) +;;; +;;; It should be confessed that this loop usually does not represent +;;; much of the total running time. Replacing it with a more +;;; straightforward "rep cmpsb" would not drastically degrade +;;; performance. + + +LoopCmps: + mov rax, [rsi + rdx] + xor rax, [rdi + rdx] + jnz LeaveLoopCmps + + mov rax, [rsi + rdx + 8] + xor rax, [rdi + rdx + 8] + jnz LeaveLoopCmps8 + + + mov rax, [rsi + rdx + 8+8] + xor rax, [rdi + rdx + 8+8] + jnz LeaveLoopCmps16 + + add rdx,8+8+8 + + jnz short LoopCmps + jmp short LenMaximum +LeaveLoopCmps16: add rdx,8 +LeaveLoopCmps8: add rdx,8 +LeaveLoopCmps: + + test eax, 0000FFFFh + jnz LenLower + + test eax,0ffffffffh + + jnz LenLower32 + + add rdx,4 + shr rax,32 + or ax,ax + jnz LenLower + +LenLower32: + shr eax,16 + add rdx,2 +LenLower: sub al, 1 + adc rdx, 0 +;;; Calculate the length of the match. If it is longer than MAX_MATCH, +;;; then automatically accept it as the best possible match and leave. + + lea rax, [rdi + rdx] + sub rax, r9 + cmp eax, MAX_MATCH + jge LenMaximum + +;;; If the length of the match is not longer than the best match we +;;; have so far, then forget it and return to the lookup loop. +;/////////////////////////////////// + + cmp eax, r11d + jg LongerMatch + + lea rsi,[r10+r11] + + mov rdi, prev_ad + mov edx, [chainlenwmask] + jmp LookupLoop + +;;; s->match_start = cur_match; +;;; best_len = len; +;;; if (len >= nice_match) break; +;;; scan_end = *(ushf*)(scan+best_len-1); + +LongerMatch: + mov r11d, eax + mov match_start, r8d + cmp eax, [nicematch] + jge LeaveNow + + lea rsi,[r10+rax] + + movzx ebx, word ptr [r9 + rax - 1] + mov rdi, prev_ad + mov edx, [chainlenwmask] + jmp LookupLoop + +;;; Accept the current string, with the maximum possible length. + +LenMaximum: + mov r11d,MAX_MATCH + mov match_start, r8d + +;;; if ((uInt)best_len <= s->lookahead) return (uInt)best_len; +;;; return s->lookahead; + +LeaveNow: +IFDEF INFOZIP + mov eax,r11d +ELSE + mov eax, Lookahead + cmp r11d, eax + cmovng eax, r11d +ENDIF + +;;; Restore the stack and return from whence we came. + + + mov rsi,[save_rsi] + mov rdi,[save_rdi] + mov rbx,[save_rbx] + mov rbp,[save_rbp] + mov r12,[save_r12] + mov r13,[save_r13] +; mov r14,[save_r14] +; mov r15,[save_r15] + + + ret 0 +; please don't remove this string ! +; Your can freely use gvmat64 in any free or commercial app +; but it is far better don't remove the string in the binary! + db 0dh,0ah,"asm686 with masm, optimised assembly code from Brian Raiter, written 1998, converted to amd 64 by Gilles Vollant 2005",0dh,0ah,0 +longest_match ENDP + +match_init PROC + ret 0 +match_init ENDP + + +END diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/masmx64/inffas8664.c b/software/scsi2sd-util/zlib-1.2.8/contrib/masmx64/inffas8664.c new file mode 100644 index 0000000..aa861a3 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/masmx64/inffas8664.c @@ -0,0 +1,186 @@ +/* inffas8664.c is a hand tuned assembler version of inffast.c - fast decoding + * version for AMD64 on Windows using Microsoft C compiler + * + * Copyright (C) 1995-2003 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + * + * Copyright (C) 2003 Chris Anderson + * Please use the copyright conditions above. + * + * 2005 - Adaptation to Microsoft C Compiler for AMD64 by Gilles Vollant + * + * inffas8664.c call function inffas8664fnc in inffasx64.asm + * inffasx64.asm is automatically convert from AMD64 portion of inffas86.c + * + * Dec-29-2003 -- I added AMD64 inflate asm support. This version is also + * slightly quicker on x86 systems because, instead of using rep movsb to copy + * data, it uses rep movsw, which moves data in 2-byte chunks instead of single + * bytes. I've tested the AMD64 code on a Fedora Core 1 + the x86_64 updates + * from http://fedora.linux.duke.edu/fc1_x86_64 + * which is running on an Athlon 64 3000+ / Gigabyte GA-K8VT800M system with + * 1GB ram. The 64-bit version is about 4% faster than the 32-bit version, + * when decompressing mozilla-source-1.3.tar.gz. + * + * Mar-13-2003 -- Most of this is derived from inffast.S which is derived from + * the gcc -S output of zlib-1.2.0/inffast.c. Zlib-1.2.0 is in beta release at + * the moment. I have successfully compiled and tested this code with gcc2.96, + * gcc3.2, icc5.0, msvc6.0. It is very close to the speed of inffast.S + * compiled with gcc -DNO_MMX, but inffast.S is still faster on the P3 with MMX + * enabled. I will attempt to merge the MMX code into this version. Newer + * versions of this and inffast.S can be found at + * http://www.eetbeetee.com/zlib/ and http://www.charm.net/~christop/zlib/ + * + */ + +#include +#include "zutil.h" +#include "inftrees.h" +#include "inflate.h" +#include "inffast.h" + +/* Mark Adler's comments from inffast.c: */ + +/* + Decode literal, length, and distance codes and write out the resulting + literal and match bytes until either not enough input or output is + available, an end-of-block is encountered, or a data error is encountered. + When large enough input and output buffers are supplied to inflate(), for + example, a 16K input buffer and a 64K output buffer, more than 95% of the + inflate execution time is spent in this routine. + + Entry assumptions: + + state->mode == LEN + strm->avail_in >= 6 + strm->avail_out >= 258 + start >= strm->avail_out + state->bits < 8 + + On return, state->mode is one of: + + LEN -- ran out of enough output space or enough available input + TYPE -- reached end of block code, inflate() to interpret next block + BAD -- error in block data + + Notes: + + - The maximum input bits used by a length/distance pair is 15 bits for the + length code, 5 bits for the length extra, 15 bits for the distance code, + and 13 bits for the distance extra. This totals 48 bits, or six bytes. + Therefore if strm->avail_in >= 6, then there is enough input to avoid + checking for available input while decoding. + + - The maximum bytes that a single length/distance pair can output is 258 + bytes, which is the maximum length that can be coded. inflate_fast() + requires strm->avail_out >= 258 for each loop to avoid checking for + output space. + */ + + + + typedef struct inffast_ar { +/* 64 32 x86 x86_64 */ +/* ar offset register */ +/* 0 0 */ void *esp; /* esp save */ +/* 8 4 */ void *ebp; /* ebp save */ +/* 16 8 */ unsigned char FAR *in; /* esi rsi local strm->next_in */ +/* 24 12 */ unsigned char FAR *last; /* r9 while in < last */ +/* 32 16 */ unsigned char FAR *out; /* edi rdi local strm->next_out */ +/* 40 20 */ unsigned char FAR *beg; /* inflate()'s init next_out */ +/* 48 24 */ unsigned char FAR *end; /* r10 while out < end */ +/* 56 28 */ unsigned char FAR *window;/* size of window, wsize!=0 */ +/* 64 32 */ code const FAR *lcode; /* ebp rbp local strm->lencode */ +/* 72 36 */ code const FAR *dcode; /* r11 local strm->distcode */ +/* 80 40 */ size_t /*unsigned long */hold; /* edx rdx local strm->hold */ +/* 88 44 */ unsigned bits; /* ebx rbx local strm->bits */ +/* 92 48 */ unsigned wsize; /* window size */ +/* 96 52 */ unsigned write; /* window write index */ +/*100 56 */ unsigned lmask; /* r12 mask for lcode */ +/*104 60 */ unsigned dmask; /* r13 mask for dcode */ +/*108 64 */ unsigned len; /* r14 match length */ +/*112 68 */ unsigned dist; /* r15 match distance */ +/*116 72 */ unsigned status; /* set when state chng*/ + } type_ar; +#ifdef ASMINF + +void inflate_fast(strm, start) +z_streamp strm; +unsigned start; /* inflate()'s starting value for strm->avail_out */ +{ + struct inflate_state FAR *state; + type_ar ar; + void inffas8664fnc(struct inffast_ar * par); + + + +#if (defined( __GNUC__ ) && defined( __amd64__ ) && ! defined( __i386 )) || (defined(_MSC_VER) && defined(_M_AMD64)) +#define PAD_AVAIL_IN 6 +#define PAD_AVAIL_OUT 258 +#else +#define PAD_AVAIL_IN 5 +#define PAD_AVAIL_OUT 257 +#endif + + /* copy state to local variables */ + state = (struct inflate_state FAR *)strm->state; + + ar.in = strm->next_in; + ar.last = ar.in + (strm->avail_in - PAD_AVAIL_IN); + ar.out = strm->next_out; + ar.beg = ar.out - (start - strm->avail_out); + ar.end = ar.out + (strm->avail_out - PAD_AVAIL_OUT); + ar.wsize = state->wsize; + ar.write = state->wnext; + ar.window = state->window; + ar.hold = state->hold; + ar.bits = state->bits; + ar.lcode = state->lencode; + ar.dcode = state->distcode; + ar.lmask = (1U << state->lenbits) - 1; + ar.dmask = (1U << state->distbits) - 1; + + /* decode literals and length/distances until end-of-block or not enough + input data or output space */ + + /* align in on 1/2 hold size boundary */ + while (((size_t)(void *)ar.in & (sizeof(ar.hold) / 2 - 1)) != 0) { + ar.hold += (unsigned long)*ar.in++ << ar.bits; + ar.bits += 8; + } + + inffas8664fnc(&ar); + + if (ar.status > 1) { + if (ar.status == 2) + strm->msg = "invalid literal/length code"; + else if (ar.status == 3) + strm->msg = "invalid distance code"; + else + strm->msg = "invalid distance too far back"; + state->mode = BAD; + } + else if ( ar.status == 1 ) { + state->mode = TYPE; + } + + /* return unused bytes (on entry, bits < 8, so in won't go too far back) */ + ar.len = ar.bits >> 3; + ar.in -= ar.len; + ar.bits -= ar.len << 3; + ar.hold &= (1U << ar.bits) - 1; + + /* update state and return */ + strm->next_in = ar.in; + strm->next_out = ar.out; + strm->avail_in = (unsigned)(ar.in < ar.last ? + PAD_AVAIL_IN + (ar.last - ar.in) : + PAD_AVAIL_IN - (ar.in - ar.last)); + strm->avail_out = (unsigned)(ar.out < ar.end ? + PAD_AVAIL_OUT + (ar.end - ar.out) : + PAD_AVAIL_OUT - (ar.out - ar.end)); + state->hold = (unsigned long)ar.hold; + state->bits = ar.bits; + return; +} + +#endif diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/masmx64/inffasx64.asm b/software/scsi2sd-util/zlib-1.2.8/contrib/masmx64/inffasx64.asm new file mode 100644 index 0000000..41ec823 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/masmx64/inffasx64.asm @@ -0,0 +1,396 @@ +; inffasx64.asm is a hand tuned assembler version of inffast.c - fast decoding +; version for AMD64 on Windows using Microsoft C compiler +; +; inffasx64.asm is automatically convert from AMD64 portion of inffas86.c +; inffasx64.asm is called by inffas8664.c, which contain more info. + + +; to compile this file, I use option +; ml64.exe /Flinffasx64 /c /Zi inffasx64.asm +; with Microsoft Macro Assembler (x64) for AMD64 +; + +; This file compile with Microsoft Macro Assembler (x64) for AMD64 +; +; ml64.exe is given with Visual Studio 2005/2008/2010 and Windows WDK +; +; (you can get Windows WDK with ml64 for AMD64 from +; http://www.microsoft.com/whdc/Devtools/wdk/default.mspx for low price) +; + + +.code +inffas8664fnc PROC + +; see http://weblogs.asp.net/oldnewthing/archive/2004/01/14/58579.aspx and +; http://msdn.microsoft.com/library/en-us/kmarch/hh/kmarch/64bitAMD_8e951dd2-ee77-4728-8702-55ce4b5dd24a.xml.asp +; +; All registers must be preserved across the call, except for +; rax, rcx, rdx, r8, r-9, r10, and r11, which are scratch. + + + mov [rsp-8],rsi + mov [rsp-16],rdi + mov [rsp-24],r12 + mov [rsp-32],r13 + mov [rsp-40],r14 + mov [rsp-48],r15 + mov [rsp-56],rbx + + mov rax,rcx + + mov [rax+8], rbp ; /* save regs rbp and rsp */ + mov [rax], rsp + + mov rsp, rax ; /* make rsp point to &ar */ + + mov rsi, [rsp+16] ; /* rsi = in */ + mov rdi, [rsp+32] ; /* rdi = out */ + mov r9, [rsp+24] ; /* r9 = last */ + mov r10, [rsp+48] ; /* r10 = end */ + mov rbp, [rsp+64] ; /* rbp = lcode */ + mov r11, [rsp+72] ; /* r11 = dcode */ + mov rdx, [rsp+80] ; /* rdx = hold */ + mov ebx, [rsp+88] ; /* ebx = bits */ + mov r12d, [rsp+100] ; /* r12d = lmask */ + mov r13d, [rsp+104] ; /* r13d = dmask */ + ; /* r14d = len */ + ; /* r15d = dist */ + + + cld + cmp r10, rdi + je L_one_time ; /* if only one decode left */ + cmp r9, rsi + + jne L_do_loop + + +L_one_time: + mov r8, r12 ; /* r8 = lmask */ + cmp bl, 32 + ja L_get_length_code_one_time + + lodsd ; /* eax = *(uint *)in++ */ + mov cl, bl ; /* cl = bits, needs it for shifting */ + add bl, 32 ; /* bits += 32 */ + shl rax, cl + or rdx, rax ; /* hold |= *((uint *)in)++ << bits */ + jmp L_get_length_code_one_time + +ALIGN 4 +L_while_test: + cmp r10, rdi + jbe L_break_loop + cmp r9, rsi + jbe L_break_loop + +L_do_loop: + mov r8, r12 ; /* r8 = lmask */ + cmp bl, 32 + ja L_get_length_code ; /* if (32 < bits) */ + + lodsd ; /* eax = *(uint *)in++ */ + mov cl, bl ; /* cl = bits, needs it for shifting */ + add bl, 32 ; /* bits += 32 */ + shl rax, cl + or rdx, rax ; /* hold |= *((uint *)in)++ << bits */ + +L_get_length_code: + and r8, rdx ; /* r8 &= hold */ + mov eax, [rbp+r8*4] ; /* eax = lcode[hold & lmask] */ + + mov cl, ah ; /* cl = this.bits */ + sub bl, ah ; /* bits -= this.bits */ + shr rdx, cl ; /* hold >>= this.bits */ + + test al, al + jnz L_test_for_length_base ; /* if (op != 0) 45.7% */ + + mov r8, r12 ; /* r8 = lmask */ + shr eax, 16 ; /* output this.val char */ + stosb + +L_get_length_code_one_time: + and r8, rdx ; /* r8 &= hold */ + mov eax, [rbp+r8*4] ; /* eax = lcode[hold & lmask] */ + +L_dolen: + mov cl, ah ; /* cl = this.bits */ + sub bl, ah ; /* bits -= this.bits */ + shr rdx, cl ; /* hold >>= this.bits */ + + test al, al + jnz L_test_for_length_base ; /* if (op != 0) 45.7% */ + + shr eax, 16 ; /* output this.val char */ + stosb + jmp L_while_test + +ALIGN 4 +L_test_for_length_base: + mov r14d, eax ; /* len = this */ + shr r14d, 16 ; /* len = this.val */ + mov cl, al + + test al, 16 + jz L_test_for_second_level_length ; /* if ((op & 16) == 0) 8% */ + and cl, 15 ; /* op &= 15 */ + jz L_decode_distance ; /* if (!op) */ + +L_add_bits_to_len: + sub bl, cl + xor eax, eax + inc eax + shl eax, cl + dec eax + and eax, edx ; /* eax &= hold */ + shr rdx, cl + add r14d, eax ; /* len += hold & mask[op] */ + +L_decode_distance: + mov r8, r13 ; /* r8 = dmask */ + cmp bl, 32 + ja L_get_distance_code ; /* if (32 < bits) */ + + lodsd ; /* eax = *(uint *)in++ */ + mov cl, bl ; /* cl = bits, needs it for shifting */ + add bl, 32 ; /* bits += 32 */ + shl rax, cl + or rdx, rax ; /* hold |= *((uint *)in)++ << bits */ + +L_get_distance_code: + and r8, rdx ; /* r8 &= hold */ + mov eax, [r11+r8*4] ; /* eax = dcode[hold & dmask] */ + +L_dodist: + mov r15d, eax ; /* dist = this */ + shr r15d, 16 ; /* dist = this.val */ + mov cl, ah + sub bl, ah ; /* bits -= this.bits */ + shr rdx, cl ; /* hold >>= this.bits */ + mov cl, al ; /* cl = this.op */ + + test al, 16 ; /* if ((op & 16) == 0) */ + jz L_test_for_second_level_dist + and cl, 15 ; /* op &= 15 */ + jz L_check_dist_one + +L_add_bits_to_dist: + sub bl, cl + xor eax, eax + inc eax + shl eax, cl + dec eax ; /* (1 << op) - 1 */ + and eax, edx ; /* eax &= hold */ + shr rdx, cl + add r15d, eax ; /* dist += hold & ((1 << op) - 1) */ + +L_check_window: + mov r8, rsi ; /* save in so from can use it's reg */ + mov rax, rdi + sub rax, [rsp+40] ; /* nbytes = out - beg */ + + cmp eax, r15d + jb L_clip_window ; /* if (dist > nbytes) 4.2% */ + + mov ecx, r14d ; /* ecx = len */ + mov rsi, rdi + sub rsi, r15 ; /* from = out - dist */ + + sar ecx, 1 + jnc L_copy_two ; /* if len % 2 == 0 */ + + rep movsw + mov al, [rsi] + mov [rdi], al + inc rdi + + mov rsi, r8 ; /* move in back to %rsi, toss from */ + jmp L_while_test + +L_copy_two: + rep movsw + mov rsi, r8 ; /* move in back to %rsi, toss from */ + jmp L_while_test + +ALIGN 4 +L_check_dist_one: + cmp r15d, 1 ; /* if dist 1, is a memset */ + jne L_check_window + cmp [rsp+40], rdi ; /* if out == beg, outside window */ + je L_check_window + + mov ecx, r14d ; /* ecx = len */ + mov al, [rdi-1] + mov ah, al + + sar ecx, 1 + jnc L_set_two + mov [rdi], al + inc rdi + +L_set_two: + rep stosw + jmp L_while_test + +ALIGN 4 +L_test_for_second_level_length: + test al, 64 + jnz L_test_for_end_of_block ; /* if ((op & 64) != 0) */ + + xor eax, eax + inc eax + shl eax, cl + dec eax + and eax, edx ; /* eax &= hold */ + add eax, r14d ; /* eax += len */ + mov eax, [rbp+rax*4] ; /* eax = lcode[val+(hold&mask[op])]*/ + jmp L_dolen + +ALIGN 4 +L_test_for_second_level_dist: + test al, 64 + jnz L_invalid_distance_code ; /* if ((op & 64) != 0) */ + + xor eax, eax + inc eax + shl eax, cl + dec eax + and eax, edx ; /* eax &= hold */ + add eax, r15d ; /* eax += dist */ + mov eax, [r11+rax*4] ; /* eax = dcode[val+(hold&mask[op])]*/ + jmp L_dodist + +ALIGN 4 +L_clip_window: + mov ecx, eax ; /* ecx = nbytes */ + mov eax, [rsp+92] ; /* eax = wsize, prepare for dist cmp */ + neg ecx ; /* nbytes = -nbytes */ + + cmp eax, r15d + jb L_invalid_distance_too_far ; /* if (dist > wsize) */ + + add ecx, r15d ; /* nbytes = dist - nbytes */ + cmp dword ptr [rsp+96], 0 + jne L_wrap_around_window ; /* if (write != 0) */ + + mov rsi, [rsp+56] ; /* from = window */ + sub eax, ecx ; /* eax -= nbytes */ + add rsi, rax ; /* from += wsize - nbytes */ + + mov eax, r14d ; /* eax = len */ + cmp r14d, ecx + jbe L_do_copy ; /* if (nbytes >= len) */ + + sub eax, ecx ; /* eax -= nbytes */ + rep movsb + mov rsi, rdi + sub rsi, r15 ; /* from = &out[ -dist ] */ + jmp L_do_copy + +ALIGN 4 +L_wrap_around_window: + mov eax, [rsp+96] ; /* eax = write */ + cmp ecx, eax + jbe L_contiguous_in_window ; /* if (write >= nbytes) */ + + mov esi, [rsp+92] ; /* from = wsize */ + add rsi, [rsp+56] ; /* from += window */ + add rsi, rax ; /* from += write */ + sub rsi, rcx ; /* from -= nbytes */ + sub ecx, eax ; /* nbytes -= write */ + + mov eax, r14d ; /* eax = len */ + cmp eax, ecx + jbe L_do_copy ; /* if (nbytes >= len) */ + + sub eax, ecx ; /* len -= nbytes */ + rep movsb + mov rsi, [rsp+56] ; /* from = window */ + mov ecx, [rsp+96] ; /* nbytes = write */ + cmp eax, ecx + jbe L_do_copy ; /* if (nbytes >= len) */ + + sub eax, ecx ; /* len -= nbytes */ + rep movsb + mov rsi, rdi + sub rsi, r15 ; /* from = out - dist */ + jmp L_do_copy + +ALIGN 4 +L_contiguous_in_window: + mov rsi, [rsp+56] ; /* rsi = window */ + add rsi, rax + sub rsi, rcx ; /* from += write - nbytes */ + + mov eax, r14d ; /* eax = len */ + cmp eax, ecx + jbe L_do_copy ; /* if (nbytes >= len) */ + + sub eax, ecx ; /* len -= nbytes */ + rep movsb + mov rsi, rdi + sub rsi, r15 ; /* from = out - dist */ + jmp L_do_copy ; /* if (nbytes >= len) */ + +ALIGN 4 +L_do_copy: + mov ecx, eax ; /* ecx = len */ + rep movsb + + mov rsi, r8 ; /* move in back to %esi, toss from */ + jmp L_while_test + +L_test_for_end_of_block: + test al, 32 + jz L_invalid_literal_length_code + mov dword ptr [rsp+116], 1 + jmp L_break_loop_with_status + +L_invalid_literal_length_code: + mov dword ptr [rsp+116], 2 + jmp L_break_loop_with_status + +L_invalid_distance_code: + mov dword ptr [rsp+116], 3 + jmp L_break_loop_with_status + +L_invalid_distance_too_far: + mov dword ptr [rsp+116], 4 + jmp L_break_loop_with_status + +L_break_loop: + mov dword ptr [rsp+116], 0 + +L_break_loop_with_status: +; /* put in, out, bits, and hold back into ar and pop esp */ + mov [rsp+16], rsi ; /* in */ + mov [rsp+32], rdi ; /* out */ + mov [rsp+88], ebx ; /* bits */ + mov [rsp+80], rdx ; /* hold */ + + mov rax, [rsp] ; /* restore rbp and rsp */ + mov rbp, [rsp+8] + mov rsp, rax + + + + mov rsi,[rsp-8] + mov rdi,[rsp-16] + mov r12,[rsp-24] + mov r13,[rsp-32] + mov r14,[rsp-40] + mov r15,[rsp-48] + mov rbx,[rsp-56] + + ret 0 +; : +; : "m" (ar) +; : "memory", "%rax", "%rbx", "%rcx", "%rdx", "%rsi", "%rdi", +; "%r8", "%r9", "%r10", "%r11", "%r12", "%r13", "%r14", "%r15" +; ); + +inffas8664fnc ENDP +;_TEXT ENDS +END diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/masmx64/readme.txt b/software/scsi2sd-util/zlib-1.2.8/contrib/masmx64/readme.txt new file mode 100644 index 0000000..652571c --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/masmx64/readme.txt @@ -0,0 +1,31 @@ +Summary +------- +This directory contains ASM implementations of the functions +longest_match() and inflate_fast(), for 64 bits x86 (both AMD64 and Intel EM64t), +for use with Microsoft Macro Assembler (x64) for AMD64 and Microsoft C++ 64 bits. + +gvmat64.asm is written by Gilles Vollant (2005), by using Brian Raiter 686/32 bits + assembly optimized version from Jean-loup Gailly original longest_match function + +inffasx64.asm and inffas8664.c were written by Chris Anderson, by optimizing + original function from Mark Adler + +Use instructions +---------------- +Assemble the .asm files using MASM and put the object files into the zlib source +directory. You can also get object files here: + + http://www.winimage.com/zLibDll/zlib124_masm_obj.zip + +define ASMV and ASMINF in your project. Include inffas8664.c in your source tree, +and inffasx64.obj and gvmat64.obj as object to link. + + +Build instructions +------------------ +run bld_64.bat with Microsoft Macro Assembler (x64) for AMD64 (ml64.exe) + +ml64.exe is given with Visual Studio 2005, Windows 2003 server DDK + +You can get Windows 2003 server DDK with ml64 and cl for AMD64 from + http://www.microsoft.com/whdc/devtools/ddk/default.mspx for low price) diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/masmx86/bld_ml32.bat b/software/scsi2sd-util/zlib-1.2.8/contrib/masmx86/bld_ml32.bat new file mode 100644 index 0000000..fcf5755 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/masmx86/bld_ml32.bat @@ -0,0 +1,2 @@ +ml /coff /Zi /c /Flmatch686.lst match686.asm +ml /coff /Zi /c /Flinffas32.lst inffas32.asm diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/masmx86/inffas32.asm b/software/scsi2sd-util/zlib-1.2.8/contrib/masmx86/inffas32.asm new file mode 100644 index 0000000..cb37a81 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/masmx86/inffas32.asm @@ -0,0 +1,1080 @@ +;/* inffas32.asm is a hand tuned assembler version of inffast.c -- fast decoding +; * +; * inffas32.asm is derivated from inffas86.c, with translation of assembly code +; * +; * Copyright (C) 1995-2003 Mark Adler +; * For conditions of distribution and use, see copyright notice in zlib.h +; * +; * Copyright (C) 2003 Chris Anderson +; * Please use the copyright conditions above. +; * +; * Mar-13-2003 -- Most of this is derived from inffast.S which is derived from +; * the gcc -S output of zlib-1.2.0/inffast.c. Zlib-1.2.0 is in beta release at +; * the moment. I have successfully compiled and tested this code with gcc2.96, +; * gcc3.2, icc5.0, msvc6.0. It is very close to the speed of inffast.S +; * compiled with gcc -DNO_MMX, but inffast.S is still faster on the P3 with MMX +; * enabled. I will attempt to merge the MMX code into this version. Newer +; * versions of this and inffast.S can be found at +; * http://www.eetbeetee.com/zlib/ and http://www.charm.net/~christop/zlib/ +; * +; * 2005 : modification by Gilles Vollant +; */ +; For Visual C++ 4.x and higher and ML 6.x and higher +; ml.exe is in directory \MASM611C of Win95 DDK +; ml.exe is also distributed in http://www.masm32.com/masmdl.htm +; and in VC++2003 toolkit at http://msdn.microsoft.com/visualc/vctoolkit2003/ +; +; +; compile with command line option +; ml /coff /Zi /c /Flinffas32.lst inffas32.asm + +; if you define NO_GZIP (see inflate.h), compile with +; ml /coff /Zi /c /Flinffas32.lst /DNO_GUNZIP inffas32.asm + + +; zlib122sup is 0 fort zlib 1.2.2.1 and lower +; zlib122sup is 8 fort zlib 1.2.2.2 and more (with addition of dmax and head +; in inflate_state in inflate.h) +zlib1222sup equ 8 + + +IFDEF GUNZIP + INFLATE_MODE_TYPE equ 11 + INFLATE_MODE_BAD equ 26 +ELSE + IFNDEF NO_GUNZIP + INFLATE_MODE_TYPE equ 11 + INFLATE_MODE_BAD equ 26 + ELSE + INFLATE_MODE_TYPE equ 3 + INFLATE_MODE_BAD equ 17 + ENDIF +ENDIF + + +; 75 "inffast.S" +;FILE "inffast.S" + +;;;GLOBAL _inflate_fast + +;;;SECTION .text + + + + .586p + .mmx + + name inflate_fast_x86 + .MODEL FLAT + +_DATA segment +inflate_fast_use_mmx: + dd 1 + + +_TEXT segment + + + +ALIGN 4 + db 'Fast decoding Code from Chris Anderson' + db 0 + +ALIGN 4 +invalid_literal_length_code_msg: + db 'invalid literal/length code' + db 0 + +ALIGN 4 +invalid_distance_code_msg: + db 'invalid distance code' + db 0 + +ALIGN 4 +invalid_distance_too_far_msg: + db 'invalid distance too far back' + db 0 + + +ALIGN 4 +inflate_fast_mask: +dd 0 +dd 1 +dd 3 +dd 7 +dd 15 +dd 31 +dd 63 +dd 127 +dd 255 +dd 511 +dd 1023 +dd 2047 +dd 4095 +dd 8191 +dd 16383 +dd 32767 +dd 65535 +dd 131071 +dd 262143 +dd 524287 +dd 1048575 +dd 2097151 +dd 4194303 +dd 8388607 +dd 16777215 +dd 33554431 +dd 67108863 +dd 134217727 +dd 268435455 +dd 536870911 +dd 1073741823 +dd 2147483647 +dd 4294967295 + + +mode_state equ 0 ;/* state->mode */ +wsize_state equ (32+zlib1222sup) ;/* state->wsize */ +write_state equ (36+4+zlib1222sup) ;/* state->write */ +window_state equ (40+4+zlib1222sup) ;/* state->window */ +hold_state equ (44+4+zlib1222sup) ;/* state->hold */ +bits_state equ (48+4+zlib1222sup) ;/* state->bits */ +lencode_state equ (64+4+zlib1222sup) ;/* state->lencode */ +distcode_state equ (68+4+zlib1222sup) ;/* state->distcode */ +lenbits_state equ (72+4+zlib1222sup) ;/* state->lenbits */ +distbits_state equ (76+4+zlib1222sup) ;/* state->distbits */ + + +;;SECTION .text +; 205 "inffast.S" +;GLOBAL inflate_fast_use_mmx + +;SECTION .data + + +; GLOBAL inflate_fast_use_mmx:object +;.size inflate_fast_use_mmx, 4 +; 226 "inffast.S" +;SECTION .text + +ALIGN 4 +_inflate_fast proc near +.FPO (16, 4, 0, 0, 1, 0) + push edi + push esi + push ebp + push ebx + pushfd + sub esp,64 + cld + + + + + mov esi, [esp+88] + mov edi, [esi+28] + + + + + + + + mov edx, [esi+4] + mov eax, [esi+0] + + add edx,eax + sub edx,11 + + mov [esp+44],eax + mov [esp+20],edx + + mov ebp, [esp+92] + mov ecx, [esi+16] + mov ebx, [esi+12] + + sub ebp,ecx + neg ebp + add ebp,ebx + + sub ecx,257 + add ecx,ebx + + mov [esp+60],ebx + mov [esp+40],ebp + mov [esp+16],ecx +; 285 "inffast.S" + mov eax, [edi+lencode_state] + mov ecx, [edi+distcode_state] + + mov [esp+8],eax + mov [esp+12],ecx + + mov eax,1 + mov ecx, [edi+lenbits_state] + shl eax,cl + dec eax + mov [esp+0],eax + + mov eax,1 + mov ecx, [edi+distbits_state] + shl eax,cl + dec eax + mov [esp+4],eax + + mov eax, [edi+wsize_state] + mov ecx, [edi+write_state] + mov edx, [edi+window_state] + + mov [esp+52],eax + mov [esp+48],ecx + mov [esp+56],edx + + mov ebp, [edi+hold_state] + mov ebx, [edi+bits_state] +; 321 "inffast.S" + mov esi, [esp+44] + mov ecx, [esp+20] + cmp ecx,esi + ja L_align_long + + add ecx,11 + sub ecx,esi + mov eax,12 + sub eax,ecx + lea edi, [esp+28] + rep movsb + mov ecx,eax + xor eax,eax + rep stosb + lea esi, [esp+28] + mov [esp+20],esi + jmp L_is_aligned + + +L_align_long: + test esi,3 + jz L_is_aligned + xor eax,eax + mov al, [esi] + inc esi + mov ecx,ebx + add ebx,8 + shl eax,cl + or ebp,eax + jmp L_align_long + +L_is_aligned: + mov edi, [esp+60] +; 366 "inffast.S" +L_check_mmx: + cmp dword ptr [inflate_fast_use_mmx],2 + je L_init_mmx + ja L_do_loop + + push eax + push ebx + push ecx + push edx + pushfd + mov eax, [esp] + xor dword ptr [esp],0200000h + + + + + popfd + pushfd + pop edx + xor edx,eax + jz L_dont_use_mmx + xor eax,eax + cpuid + cmp ebx,0756e6547h + jne L_dont_use_mmx + cmp ecx,06c65746eh + jne L_dont_use_mmx + cmp edx,049656e69h + jne L_dont_use_mmx + mov eax,1 + cpuid + shr eax,8 + and eax,15 + cmp eax,6 + jne L_dont_use_mmx + test edx,0800000h + jnz L_use_mmx + jmp L_dont_use_mmx +L_use_mmx: + mov dword ptr [inflate_fast_use_mmx],2 + jmp L_check_mmx_pop +L_dont_use_mmx: + mov dword ptr [inflate_fast_use_mmx],3 +L_check_mmx_pop: + pop edx + pop ecx + pop ebx + pop eax + jmp L_check_mmx +; 426 "inffast.S" +ALIGN 4 +L_do_loop: +; 437 "inffast.S" + cmp bl,15 + ja L_get_length_code + + xor eax,eax + lodsw + mov cl,bl + add bl,16 + shl eax,cl + or ebp,eax + +L_get_length_code: + mov edx, [esp+0] + mov ecx, [esp+8] + and edx,ebp + mov eax, [ecx+edx*4] + +L_dolen: + + + + + + + mov cl,ah + sub bl,ah + shr ebp,cl + + + + + + + test al,al + jnz L_test_for_length_base + + shr eax,16 + stosb + +L_while_test: + + + cmp [esp+16],edi + jbe L_break_loop + + cmp [esp+20],esi + ja L_do_loop + jmp L_break_loop + +L_test_for_length_base: +; 502 "inffast.S" + mov edx,eax + shr edx,16 + mov cl,al + + test al,16 + jz L_test_for_second_level_length + and cl,15 + jz L_save_len + cmp bl,cl + jae L_add_bits_to_len + + mov ch,cl + xor eax,eax + lodsw + mov cl,bl + add bl,16 + shl eax,cl + or ebp,eax + mov cl,ch + +L_add_bits_to_len: + mov eax,1 + shl eax,cl + dec eax + sub bl,cl + and eax,ebp + shr ebp,cl + add edx,eax + +L_save_len: + mov [esp+24],edx + + +L_decode_distance: +; 549 "inffast.S" + cmp bl,15 + ja L_get_distance_code + + xor eax,eax + lodsw + mov cl,bl + add bl,16 + shl eax,cl + or ebp,eax + +L_get_distance_code: + mov edx, [esp+4] + mov ecx, [esp+12] + and edx,ebp + mov eax, [ecx+edx*4] + + +L_dodist: + mov edx,eax + shr edx,16 + mov cl,ah + sub bl,ah + shr ebp,cl +; 584 "inffast.S" + mov cl,al + + test al,16 + jz L_test_for_second_level_dist + and cl,15 + jz L_check_dist_one + cmp bl,cl + jae L_add_bits_to_dist + + mov ch,cl + xor eax,eax + lodsw + mov cl,bl + add bl,16 + shl eax,cl + or ebp,eax + mov cl,ch + +L_add_bits_to_dist: + mov eax,1 + shl eax,cl + dec eax + sub bl,cl + and eax,ebp + shr ebp,cl + add edx,eax + jmp L_check_window + +L_check_window: +; 625 "inffast.S" + mov [esp+44],esi + mov eax,edi + sub eax, [esp+40] + + cmp eax,edx + jb L_clip_window + + mov ecx, [esp+24] + mov esi,edi + sub esi,edx + + sub ecx,3 + mov al, [esi] + mov [edi],al + mov al, [esi+1] + mov dl, [esi+2] + add esi,3 + mov [edi+1],al + mov [edi+2],dl + add edi,3 + rep movsb + + mov esi, [esp+44] + jmp L_while_test + +ALIGN 4 +L_check_dist_one: + cmp edx,1 + jne L_check_window + cmp [esp+40],edi + je L_check_window + + dec edi + mov ecx, [esp+24] + mov al, [edi] + sub ecx,3 + + mov [edi+1],al + mov [edi+2],al + mov [edi+3],al + add edi,4 + rep stosb + + jmp L_while_test + +ALIGN 4 +L_test_for_second_level_length: + + + + + test al,64 + jnz L_test_for_end_of_block + + mov eax,1 + shl eax,cl + dec eax + and eax,ebp + add eax,edx + mov edx, [esp+8] + mov eax, [edx+eax*4] + jmp L_dolen + +ALIGN 4 +L_test_for_second_level_dist: + + + + + test al,64 + jnz L_invalid_distance_code + + mov eax,1 + shl eax,cl + dec eax + and eax,ebp + add eax,edx + mov edx, [esp+12] + mov eax, [edx+eax*4] + jmp L_dodist + +ALIGN 4 +L_clip_window: +; 721 "inffast.S" + mov ecx,eax + mov eax, [esp+52] + neg ecx + mov esi, [esp+56] + + cmp eax,edx + jb L_invalid_distance_too_far + + add ecx,edx + cmp dword ptr [esp+48],0 + jne L_wrap_around_window + + sub eax,ecx + add esi,eax +; 749 "inffast.S" + mov eax, [esp+24] + cmp eax,ecx + jbe L_do_copy1 + + sub eax,ecx + rep movsb + mov esi,edi + sub esi,edx + jmp L_do_copy1 + + cmp eax,ecx + jbe L_do_copy1 + + sub eax,ecx + rep movsb + mov esi,edi + sub esi,edx + jmp L_do_copy1 + +L_wrap_around_window: +; 793 "inffast.S" + mov eax, [esp+48] + cmp ecx,eax + jbe L_contiguous_in_window + + add esi, [esp+52] + add esi,eax + sub esi,ecx + sub ecx,eax + + + mov eax, [esp+24] + cmp eax,ecx + jbe L_do_copy1 + + sub eax,ecx + rep movsb + mov esi, [esp+56] + mov ecx, [esp+48] + cmp eax,ecx + jbe L_do_copy1 + + sub eax,ecx + rep movsb + mov esi,edi + sub esi,edx + jmp L_do_copy1 + +L_contiguous_in_window: +; 836 "inffast.S" + add esi,eax + sub esi,ecx + + + mov eax, [esp+24] + cmp eax,ecx + jbe L_do_copy1 + + sub eax,ecx + rep movsb + mov esi,edi + sub esi,edx + +L_do_copy1: +; 862 "inffast.S" + mov ecx,eax + rep movsb + + mov esi, [esp+44] + jmp L_while_test +; 878 "inffast.S" +ALIGN 4 +L_init_mmx: + emms + + + + + + movd mm0,ebp + mov ebp,ebx +; 896 "inffast.S" + movd mm4,dword ptr [esp+0] + movq mm3,mm4 + movd mm5,dword ptr [esp+4] + movq mm2,mm5 + pxor mm1,mm1 + mov ebx, [esp+8] + jmp L_do_loop_mmx + +ALIGN 4 +L_do_loop_mmx: + psrlq mm0,mm1 + + cmp ebp,32 + ja L_get_length_code_mmx + + movd mm6,ebp + movd mm7,dword ptr [esi] + add esi,4 + psllq mm7,mm6 + add ebp,32 + por mm0,mm7 + +L_get_length_code_mmx: + pand mm4,mm0 + movd eax,mm4 + movq mm4,mm3 + mov eax, [ebx+eax*4] + +L_dolen_mmx: + movzx ecx,ah + movd mm1,ecx + sub ebp,ecx + + test al,al + jnz L_test_for_length_base_mmx + + shr eax,16 + stosb + +L_while_test_mmx: + + + cmp [esp+16],edi + jbe L_break_loop + + cmp [esp+20],esi + ja L_do_loop_mmx + jmp L_break_loop + +L_test_for_length_base_mmx: + + mov edx,eax + shr edx,16 + + test al,16 + jz L_test_for_second_level_length_mmx + and eax,15 + jz L_decode_distance_mmx + + psrlq mm0,mm1 + movd mm1,eax + movd ecx,mm0 + sub ebp,eax + and ecx, [inflate_fast_mask+eax*4] + add edx,ecx + +L_decode_distance_mmx: + psrlq mm0,mm1 + + cmp ebp,32 + ja L_get_dist_code_mmx + + movd mm6,ebp + movd mm7,dword ptr [esi] + add esi,4 + psllq mm7,mm6 + add ebp,32 + por mm0,mm7 + +L_get_dist_code_mmx: + mov ebx, [esp+12] + pand mm5,mm0 + movd eax,mm5 + movq mm5,mm2 + mov eax, [ebx+eax*4] + +L_dodist_mmx: + + movzx ecx,ah + mov ebx,eax + shr ebx,16 + sub ebp,ecx + movd mm1,ecx + + test al,16 + jz L_test_for_second_level_dist_mmx + and eax,15 + jz L_check_dist_one_mmx + +L_add_bits_to_dist_mmx: + psrlq mm0,mm1 + movd mm1,eax + movd ecx,mm0 + sub ebp,eax + and ecx, [inflate_fast_mask+eax*4] + add ebx,ecx + +L_check_window_mmx: + mov [esp+44],esi + mov eax,edi + sub eax, [esp+40] + + cmp eax,ebx + jb L_clip_window_mmx + + mov ecx,edx + mov esi,edi + sub esi,ebx + + sub ecx,3 + mov al, [esi] + mov [edi],al + mov al, [esi+1] + mov dl, [esi+2] + add esi,3 + mov [edi+1],al + mov [edi+2],dl + add edi,3 + rep movsb + + mov esi, [esp+44] + mov ebx, [esp+8] + jmp L_while_test_mmx + +ALIGN 4 +L_check_dist_one_mmx: + cmp ebx,1 + jne L_check_window_mmx + cmp [esp+40],edi + je L_check_window_mmx + + dec edi + mov ecx,edx + mov al, [edi] + sub ecx,3 + + mov [edi+1],al + mov [edi+2],al + mov [edi+3],al + add edi,4 + rep stosb + + mov ebx, [esp+8] + jmp L_while_test_mmx + +ALIGN 4 +L_test_for_second_level_length_mmx: + test al,64 + jnz L_test_for_end_of_block + + and eax,15 + psrlq mm0,mm1 + movd ecx,mm0 + and ecx, [inflate_fast_mask+eax*4] + add ecx,edx + mov eax, [ebx+ecx*4] + jmp L_dolen_mmx + +ALIGN 4 +L_test_for_second_level_dist_mmx: + test al,64 + jnz L_invalid_distance_code + + and eax,15 + psrlq mm0,mm1 + movd ecx,mm0 + and ecx, [inflate_fast_mask+eax*4] + mov eax, [esp+12] + add ecx,ebx + mov eax, [eax+ecx*4] + jmp L_dodist_mmx + +ALIGN 4 +L_clip_window_mmx: + + mov ecx,eax + mov eax, [esp+52] + neg ecx + mov esi, [esp+56] + + cmp eax,ebx + jb L_invalid_distance_too_far + + add ecx,ebx + cmp dword ptr [esp+48],0 + jne L_wrap_around_window_mmx + + sub eax,ecx + add esi,eax + + cmp edx,ecx + jbe L_do_copy1_mmx + + sub edx,ecx + rep movsb + mov esi,edi + sub esi,ebx + jmp L_do_copy1_mmx + + cmp edx,ecx + jbe L_do_copy1_mmx + + sub edx,ecx + rep movsb + mov esi,edi + sub esi,ebx + jmp L_do_copy1_mmx + +L_wrap_around_window_mmx: + + mov eax, [esp+48] + cmp ecx,eax + jbe L_contiguous_in_window_mmx + + add esi, [esp+52] + add esi,eax + sub esi,ecx + sub ecx,eax + + + cmp edx,ecx + jbe L_do_copy1_mmx + + sub edx,ecx + rep movsb + mov esi, [esp+56] + mov ecx, [esp+48] + cmp edx,ecx + jbe L_do_copy1_mmx + + sub edx,ecx + rep movsb + mov esi,edi + sub esi,ebx + jmp L_do_copy1_mmx + +L_contiguous_in_window_mmx: + + add esi,eax + sub esi,ecx + + + cmp edx,ecx + jbe L_do_copy1_mmx + + sub edx,ecx + rep movsb + mov esi,edi + sub esi,ebx + +L_do_copy1_mmx: + + + mov ecx,edx + rep movsb + + mov esi, [esp+44] + mov ebx, [esp+8] + jmp L_while_test_mmx +; 1174 "inffast.S" +L_invalid_distance_code: + + + + + + mov ecx, invalid_distance_code_msg + mov edx,INFLATE_MODE_BAD + jmp L_update_stream_state + +L_test_for_end_of_block: + + + + + + test al,32 + jz L_invalid_literal_length_code + + mov ecx,0 + mov edx,INFLATE_MODE_TYPE + jmp L_update_stream_state + +L_invalid_literal_length_code: + + + + + + mov ecx, invalid_literal_length_code_msg + mov edx,INFLATE_MODE_BAD + jmp L_update_stream_state + +L_invalid_distance_too_far: + + + + mov esi, [esp+44] + mov ecx, invalid_distance_too_far_msg + mov edx,INFLATE_MODE_BAD + jmp L_update_stream_state + +L_update_stream_state: + + mov eax, [esp+88] + test ecx,ecx + jz L_skip_msg + mov [eax+24],ecx +L_skip_msg: + mov eax, [eax+28] + mov [eax+mode_state],edx + jmp L_break_loop + +ALIGN 4 +L_break_loop: +; 1243 "inffast.S" + cmp dword ptr [inflate_fast_use_mmx],2 + jne L_update_next_in + + + + mov ebx,ebp + +L_update_next_in: +; 1266 "inffast.S" + mov eax, [esp+88] + mov ecx,ebx + mov edx, [eax+28] + shr ecx,3 + sub esi,ecx + shl ecx,3 + sub ebx,ecx + mov [eax+12],edi + mov [edx+bits_state],ebx + mov ecx,ebx + + lea ebx, [esp+28] + cmp [esp+20],ebx + jne L_buf_not_used + + sub esi,ebx + mov ebx, [eax+0] + mov [esp+20],ebx + add esi,ebx + mov ebx, [eax+4] + sub ebx,11 + add [esp+20],ebx + +L_buf_not_used: + mov [eax+0],esi + + mov ebx,1 + shl ebx,cl + dec ebx + + + + + + cmp dword ptr [inflate_fast_use_mmx],2 + jne L_update_hold + + + + psrlq mm0,mm1 + movd ebp,mm0 + + emms + +L_update_hold: + + + + and ebp,ebx + mov [edx+hold_state],ebp + + + + + mov ebx, [esp+20] + cmp ebx,esi + jbe L_last_is_smaller + + sub ebx,esi + add ebx,11 + mov [eax+4],ebx + jmp L_fixup_out +L_last_is_smaller: + sub esi,ebx + neg esi + add esi,11 + mov [eax+4],esi + + + + +L_fixup_out: + + mov ebx, [esp+16] + cmp ebx,edi + jbe L_end_is_smaller + + sub ebx,edi + add ebx,257 + mov [eax+16],ebx + jmp L_done +L_end_is_smaller: + sub edi,ebx + neg edi + add edi,257 + mov [eax+16],edi + + + + + +L_done: + add esp,64 + popfd + pop ebx + pop ebp + pop esi + pop edi + ret +_inflate_fast endp + +_TEXT ends +end diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/masmx86/match686.asm b/software/scsi2sd-util/zlib-1.2.8/contrib/masmx86/match686.asm new file mode 100644 index 0000000..69e0eed --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/masmx86/match686.asm @@ -0,0 +1,479 @@ +; match686.asm -- Asm portion of the optimized longest_match for 32 bits x86 +; Copyright (C) 1995-1996 Jean-loup Gailly, Brian Raiter and Gilles Vollant. +; File written by Gilles Vollant, by converting match686.S from Brian Raiter +; for MASM. This is as assembly version of longest_match +; from Jean-loup Gailly in deflate.c +; +; http://www.zlib.net +; http://www.winimage.com/zLibDll +; http://www.muppetlabs.com/~breadbox/software/assembly.html +; +; For Visual C++ 4.x and higher and ML 6.x and higher +; ml.exe is distributed in +; http://www.microsoft.com/downloads/details.aspx?FamilyID=7a1c9da0-0510-44a2-b042-7ef370530c64 +; +; this file contain two implementation of longest_match +; +; this longest_match was written by Brian raiter (1998), optimized for Pentium Pro +; (and the faster known version of match_init on modern Core 2 Duo and AMD Phenom) +; +; for using an assembly version of longest_match, you need define ASMV in project +; +; compile the asm file running +; ml /coff /Zi /c /Flmatch686.lst match686.asm +; and do not include match686.obj in your project +; +; note: contrib of zLib 1.2.3 and earlier contained both a deprecated version for +; Pentium (prior Pentium Pro) and this version for Pentium Pro and modern processor +; with autoselect (with cpu detection code) +; if you want support the old pentium optimization, you can still use these version +; +; this file is not optimized for old pentium, but it compatible with all x86 32 bits +; processor (starting 80386) +; +; +; see below : zlib1222add must be adjuster if you use a zlib version < 1.2.2.2 + +;uInt longest_match(s, cur_match) +; deflate_state *s; +; IPos cur_match; /* current match */ + + NbStack equ 76 + cur_match equ dword ptr[esp+NbStack-0] + str_s equ dword ptr[esp+NbStack-4] +; 5 dword on top (ret,ebp,esi,edi,ebx) + adrret equ dword ptr[esp+NbStack-8] + pushebp equ dword ptr[esp+NbStack-12] + pushedi equ dword ptr[esp+NbStack-16] + pushesi equ dword ptr[esp+NbStack-20] + pushebx equ dword ptr[esp+NbStack-24] + + chain_length equ dword ptr [esp+NbStack-28] + limit equ dword ptr [esp+NbStack-32] + best_len equ dword ptr [esp+NbStack-36] + window equ dword ptr [esp+NbStack-40] + prev equ dword ptr [esp+NbStack-44] + scan_start equ word ptr [esp+NbStack-48] + wmask equ dword ptr [esp+NbStack-52] + match_start_ptr equ dword ptr [esp+NbStack-56] + nice_match equ dword ptr [esp+NbStack-60] + scan equ dword ptr [esp+NbStack-64] + + windowlen equ dword ptr [esp+NbStack-68] + match_start equ dword ptr [esp+NbStack-72] + strend equ dword ptr [esp+NbStack-76] + NbStackAdd equ (NbStack-24) + + .386p + + name gvmatch + .MODEL FLAT + + + +; all the +zlib1222add offsets are due to the addition of fields +; in zlib in the deflate_state structure since the asm code was first written +; (if you compile with zlib 1.0.4 or older, use "zlib1222add equ (-4)"). +; (if you compile with zlib between 1.0.5 and 1.2.2.1, use "zlib1222add equ 0"). +; if you compile with zlib 1.2.2.2 or later , use "zlib1222add equ 8"). + + zlib1222add equ 8 + +; Note : these value are good with a 8 bytes boundary pack structure + dep_chain_length equ 74h+zlib1222add + dep_window equ 30h+zlib1222add + dep_strstart equ 64h+zlib1222add + dep_prev_length equ 70h+zlib1222add + dep_nice_match equ 88h+zlib1222add + dep_w_size equ 24h+zlib1222add + dep_prev equ 38h+zlib1222add + dep_w_mask equ 2ch+zlib1222add + dep_good_match equ 84h+zlib1222add + dep_match_start equ 68h+zlib1222add + dep_lookahead equ 6ch+zlib1222add + + +_TEXT segment + +IFDEF NOUNDERLINE + public longest_match + public match_init +ELSE + public _longest_match + public _match_init +ENDIF + + MAX_MATCH equ 258 + MIN_MATCH equ 3 + MIN_LOOKAHEAD equ (MAX_MATCH+MIN_MATCH+1) + + + +MAX_MATCH equ 258 +MIN_MATCH equ 3 +MIN_LOOKAHEAD equ (MAX_MATCH + MIN_MATCH + 1) +MAX_MATCH_8_ equ ((MAX_MATCH + 7) AND 0FFF0h) + + +;;; stack frame offsets + +chainlenwmask equ esp + 0 ; high word: current chain len + ; low word: s->wmask +window equ esp + 4 ; local copy of s->window +windowbestlen equ esp + 8 ; s->window + bestlen +scanstart equ esp + 16 ; first two bytes of string +scanend equ esp + 12 ; last two bytes of string +scanalign equ esp + 20 ; dword-misalignment of string +nicematch equ esp + 24 ; a good enough match size +bestlen equ esp + 28 ; size of best match so far +scan equ esp + 32 ; ptr to string wanting match + +LocalVarsSize equ 36 +; saved ebx byte esp + 36 +; saved edi byte esp + 40 +; saved esi byte esp + 44 +; saved ebp byte esp + 48 +; return address byte esp + 52 +deflatestate equ esp + 56 ; the function arguments +curmatch equ esp + 60 + +;;; Offsets for fields in the deflate_state structure. These numbers +;;; are calculated from the definition of deflate_state, with the +;;; assumption that the compiler will dword-align the fields. (Thus, +;;; changing the definition of deflate_state could easily cause this +;;; program to crash horribly, without so much as a warning at +;;; compile time. Sigh.) + +dsWSize equ 36+zlib1222add +dsWMask equ 44+zlib1222add +dsWindow equ 48+zlib1222add +dsPrev equ 56+zlib1222add +dsMatchLen equ 88+zlib1222add +dsPrevMatch equ 92+zlib1222add +dsStrStart equ 100+zlib1222add +dsMatchStart equ 104+zlib1222add +dsLookahead equ 108+zlib1222add +dsPrevLen equ 112+zlib1222add +dsMaxChainLen equ 116+zlib1222add +dsGoodMatch equ 132+zlib1222add +dsNiceMatch equ 136+zlib1222add + + +;;; match686.asm -- Pentium-Pro-optimized version of longest_match() +;;; Written for zlib 1.1.2 +;;; Copyright (C) 1998 Brian Raiter +;;; You can look at http://www.muppetlabs.com/~breadbox/software/assembly.html +;;; +;; +;; This software is provided 'as-is', without any express or implied +;; warranty. In no event will the authors be held liable for any damages +;; arising from the use of this software. +;; +;; Permission is granted to anyone to use this software for any purpose, +;; including commercial applications, and to alter it and redistribute it +;; freely, subject to the following restrictions: +;; +;; 1. The origin of this software must not be misrepresented; you must not +;; claim that you wrote the original software. If you use this software +;; in a product, an acknowledgment in the product documentation would be +;; appreciated but is not required. +;; 2. Altered source versions must be plainly marked as such, and must not be +;; misrepresented as being the original software +;; 3. This notice may not be removed or altered from any source distribution. +;; + +;GLOBAL _longest_match, _match_init + + +;SECTION .text + +;;; uInt longest_match(deflate_state *deflatestate, IPos curmatch) + +;_longest_match: + IFDEF NOUNDERLINE + longest_match proc near + ELSE + _longest_match proc near + ENDIF +.FPO (9, 4, 0, 0, 1, 0) + +;;; Save registers that the compiler may be using, and adjust esp to +;;; make room for our stack frame. + + push ebp + push edi + push esi + push ebx + sub esp, LocalVarsSize + +;;; Retrieve the function arguments. ecx will hold cur_match +;;; throughout the entire function. edx will hold the pointer to the +;;; deflate_state structure during the function's setup (before +;;; entering the main loop. + + mov edx, [deflatestate] + mov ecx, [curmatch] + +;;; uInt wmask = s->w_mask; +;;; unsigned chain_length = s->max_chain_length; +;;; if (s->prev_length >= s->good_match) { +;;; chain_length >>= 2; +;;; } + + mov eax, [edx + dsPrevLen] + mov ebx, [edx + dsGoodMatch] + cmp eax, ebx + mov eax, [edx + dsWMask] + mov ebx, [edx + dsMaxChainLen] + jl LastMatchGood + shr ebx, 2 +LastMatchGood: + +;;; chainlen is decremented once beforehand so that the function can +;;; use the sign flag instead of the zero flag for the exit test. +;;; It is then shifted into the high word, to make room for the wmask +;;; value, which it will always accompany. + + dec ebx + shl ebx, 16 + or ebx, eax + mov [chainlenwmask], ebx + +;;; if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead; + + mov eax, [edx + dsNiceMatch] + mov ebx, [edx + dsLookahead] + cmp ebx, eax + jl LookaheadLess + mov ebx, eax +LookaheadLess: mov [nicematch], ebx + +;;; register Bytef *scan = s->window + s->strstart; + + mov esi, [edx + dsWindow] + mov [window], esi + mov ebp, [edx + dsStrStart] + lea edi, [esi + ebp] + mov [scan], edi + +;;; Determine how many bytes the scan ptr is off from being +;;; dword-aligned. + + mov eax, edi + neg eax + and eax, 3 + mov [scanalign], eax + +;;; IPos limit = s->strstart > (IPos)MAX_DIST(s) ? +;;; s->strstart - (IPos)MAX_DIST(s) : NIL; + + mov eax, [edx + dsWSize] + sub eax, MIN_LOOKAHEAD + sub ebp, eax + jg LimitPositive + xor ebp, ebp +LimitPositive: + +;;; int best_len = s->prev_length; + + mov eax, [edx + dsPrevLen] + mov [bestlen], eax + +;;; Store the sum of s->window + best_len in esi locally, and in esi. + + add esi, eax + mov [windowbestlen], esi + +;;; register ush scan_start = *(ushf*)scan; +;;; register ush scan_end = *(ushf*)(scan+best_len-1); +;;; Posf *prev = s->prev; + + movzx ebx, word ptr [edi] + mov [scanstart], ebx + movzx ebx, word ptr [edi + eax - 1] + mov [scanend], ebx + mov edi, [edx + dsPrev] + +;;; Jump into the main loop. + + mov edx, [chainlenwmask] + jmp short LoopEntry + +align 4 + +;;; do { +;;; match = s->window + cur_match; +;;; if (*(ushf*)(match+best_len-1) != scan_end || +;;; *(ushf*)match != scan_start) continue; +;;; [...] +;;; } while ((cur_match = prev[cur_match & wmask]) > limit +;;; && --chain_length != 0); +;;; +;;; Here is the inner loop of the function. The function will spend the +;;; majority of its time in this loop, and majority of that time will +;;; be spent in the first ten instructions. +;;; +;;; Within this loop: +;;; ebx = scanend +;;; ecx = curmatch +;;; edx = chainlenwmask - i.e., ((chainlen << 16) | wmask) +;;; esi = windowbestlen - i.e., (window + bestlen) +;;; edi = prev +;;; ebp = limit + +LookupLoop: + and ecx, edx + movzx ecx, word ptr [edi + ecx*2] + cmp ecx, ebp + jbe LeaveNow + sub edx, 00010000h + js LeaveNow +LoopEntry: movzx eax, word ptr [esi + ecx - 1] + cmp eax, ebx + jnz LookupLoop + mov eax, [window] + movzx eax, word ptr [eax + ecx] + cmp eax, [scanstart] + jnz LookupLoop + +;;; Store the current value of chainlen. + + mov [chainlenwmask], edx + +;;; Point edi to the string under scrutiny, and esi to the string we +;;; are hoping to match it up with. In actuality, esi and edi are +;;; both pointed (MAX_MATCH_8 - scanalign) bytes ahead, and edx is +;;; initialized to -(MAX_MATCH_8 - scanalign). + + mov esi, [window] + mov edi, [scan] + add esi, ecx + mov eax, [scanalign] + mov edx, 0fffffef8h; -(MAX_MATCH_8) + lea edi, [edi + eax + 0108h] ;MAX_MATCH_8] + lea esi, [esi + eax + 0108h] ;MAX_MATCH_8] + +;;; Test the strings for equality, 8 bytes at a time. At the end, +;;; adjust edx so that it is offset to the exact byte that mismatched. +;;; +;;; We already know at this point that the first three bytes of the +;;; strings match each other, and they can be safely passed over before +;;; starting the compare loop. So what this code does is skip over 0-3 +;;; bytes, as much as necessary in order to dword-align the edi +;;; pointer. (esi will still be misaligned three times out of four.) +;;; +;;; It should be confessed that this loop usually does not represent +;;; much of the total running time. Replacing it with a more +;;; straightforward "rep cmpsb" would not drastically degrade +;;; performance. + +LoopCmps: + mov eax, [esi + edx] + xor eax, [edi + edx] + jnz LeaveLoopCmps + mov eax, [esi + edx + 4] + xor eax, [edi + edx + 4] + jnz LeaveLoopCmps4 + add edx, 8 + jnz LoopCmps + jmp short LenMaximum +LeaveLoopCmps4: add edx, 4 +LeaveLoopCmps: test eax, 0000FFFFh + jnz LenLower + add edx, 2 + shr eax, 16 +LenLower: sub al, 1 + adc edx, 0 + +;;; Calculate the length of the match. If it is longer than MAX_MATCH, +;;; then automatically accept it as the best possible match and leave. + + lea eax, [edi + edx] + mov edi, [scan] + sub eax, edi + cmp eax, MAX_MATCH + jge LenMaximum + +;;; If the length of the match is not longer than the best match we +;;; have so far, then forget it and return to the lookup loop. + + mov edx, [deflatestate] + mov ebx, [bestlen] + cmp eax, ebx + jg LongerMatch + mov esi, [windowbestlen] + mov edi, [edx + dsPrev] + mov ebx, [scanend] + mov edx, [chainlenwmask] + jmp LookupLoop + +;;; s->match_start = cur_match; +;;; best_len = len; +;;; if (len >= nice_match) break; +;;; scan_end = *(ushf*)(scan+best_len-1); + +LongerMatch: mov ebx, [nicematch] + mov [bestlen], eax + mov [edx + dsMatchStart], ecx + cmp eax, ebx + jge LeaveNow + mov esi, [window] + add esi, eax + mov [windowbestlen], esi + movzx ebx, word ptr [edi + eax - 1] + mov edi, [edx + dsPrev] + mov [scanend], ebx + mov edx, [chainlenwmask] + jmp LookupLoop + +;;; Accept the current string, with the maximum possible length. + +LenMaximum: mov edx, [deflatestate] + mov dword ptr [bestlen], MAX_MATCH + mov [edx + dsMatchStart], ecx + +;;; if ((uInt)best_len <= s->lookahead) return (uInt)best_len; +;;; return s->lookahead; + +LeaveNow: + mov edx, [deflatestate] + mov ebx, [bestlen] + mov eax, [edx + dsLookahead] + cmp ebx, eax + jg LookaheadRet + mov eax, ebx +LookaheadRet: + +;;; Restore the stack and return from whence we came. + + add esp, LocalVarsSize + pop ebx + pop esi + pop edi + pop ebp + + ret +; please don't remove this string ! +; Your can freely use match686 in any free or commercial app if you don't remove the string in the binary! + db 0dh,0ah,"asm686 with masm, optimised assembly code from Brian Raiter, written 1998",0dh,0ah + + + IFDEF NOUNDERLINE + longest_match endp + ELSE + _longest_match endp + ENDIF + + IFDEF NOUNDERLINE + match_init proc near + ret + match_init endp + ELSE + _match_init proc near + ret + _match_init endp + ENDIF + + +_TEXT ends +end diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/masmx86/readme.txt b/software/scsi2sd-util/zlib-1.2.8/contrib/masmx86/readme.txt new file mode 100644 index 0000000..3f88886 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/masmx86/readme.txt @@ -0,0 +1,27 @@ + +Summary +------- +This directory contains ASM implementations of the functions +longest_match() and inflate_fast(). + + +Use instructions +---------------- +Assemble using MASM, and copy the object files into the zlib source +directory, then run the appropriate makefile, as suggested below. You can +donwload MASM from here: + + http://www.microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=7a1c9da0-0510-44a2-b042-7ef370530c64 + +You can also get objects files here: + + http://www.winimage.com/zLibDll/zlib124_masm_obj.zip + +Build instructions +------------------ +* With Microsoft C and MASM: +nmake -f win32/Makefile.msc LOC="-DASMV -DASMINF" OBJA="match686.obj inffas32.obj" + +* With Borland C and TASM: +make -f win32/Makefile.bor LOCAL_ZLIB="-DASMV -DASMINF" OBJA="match686.obj inffas32.obj" OBJPA="+match686c.obj+match686.obj+inffas32.obj" + diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/minizip/Makefile b/software/scsi2sd-util/zlib-1.2.8/contrib/minizip/Makefile new file mode 100644 index 0000000..84eaad2 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/minizip/Makefile @@ -0,0 +1,25 @@ +CC=cc +CFLAGS=-O -I../.. + +UNZ_OBJS = miniunz.o unzip.o ioapi.o ../../libz.a +ZIP_OBJS = minizip.o zip.o ioapi.o ../../libz.a + +.c.o: + $(CC) -c $(CFLAGS) $*.c + +all: miniunz minizip + +miniunz: $(UNZ_OBJS) + $(CC) $(CFLAGS) -o $@ $(UNZ_OBJS) + +minizip: $(ZIP_OBJS) + $(CC) $(CFLAGS) -o $@ $(ZIP_OBJS) + +test: miniunz minizip + ./minizip test readme.txt + ./miniunz -l test.zip + mv readme.txt readme.old + ./miniunz test.zip + +clean: + /bin/rm -f *.o *~ minizip miniunz diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/minizip/Makefile.am b/software/scsi2sd-util/zlib-1.2.8/contrib/minizip/Makefile.am new file mode 100644 index 0000000..d343011 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/minizip/Makefile.am @@ -0,0 +1,45 @@ +lib_LTLIBRARIES = libminizip.la + +if COND_DEMOS +bin_PROGRAMS = miniunzip minizip +endif + +zlib_top_srcdir = $(top_srcdir)/../.. +zlib_top_builddir = $(top_builddir)/../.. + +AM_CPPFLAGS = -I$(zlib_top_srcdir) +AM_LDFLAGS = -L$(zlib_top_builddir) + +if WIN32 +iowin32_src = iowin32.c +iowin32_h = iowin32.h +endif + +libminizip_la_SOURCES = \ + ioapi.c \ + mztools.c \ + unzip.c \ + zip.c \ + ${iowin32_src} + +libminizip_la_LDFLAGS = $(AM_LDFLAGS) -version-info 1:0:0 -lz + +minizip_includedir = $(includedir)/minizip +minizip_include_HEADERS = \ + crypt.h \ + ioapi.h \ + mztools.h \ + unzip.h \ + zip.h \ + ${iowin32_h} + +pkgconfigdir = $(libdir)/pkgconfig +pkgconfig_DATA = minizip.pc + +EXTRA_PROGRAMS = miniunzip minizip + +miniunzip_SOURCES = miniunz.c +miniunzip_LDADD = libminizip.la + +minizip_SOURCES = minizip.c +minizip_LDADD = libminizip.la -lz diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/minizip/MiniZip64_Changes.txt b/software/scsi2sd-util/zlib-1.2.8/contrib/minizip/MiniZip64_Changes.txt new file mode 100644 index 0000000..13a1bd9 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/minizip/MiniZip64_Changes.txt @@ -0,0 +1,6 @@ + +MiniZip 1.1 was derrived from MiniZip at version 1.01f + +Change in 1.0 (Okt 2009) + - **TODO - Add history** + diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/minizip/MiniZip64_info.txt b/software/scsi2sd-util/zlib-1.2.8/contrib/minizip/MiniZip64_info.txt new file mode 100644 index 0000000..57d7152 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/minizip/MiniZip64_info.txt @@ -0,0 +1,74 @@ +MiniZip - Copyright (c) 1998-2010 - by Gilles Vollant - version 1.1 64 bits from Mathias Svensson + +Introduction +--------------------- +MiniZip 1.1 is built from MiniZip 1.0 by Gilles Vollant ( http://www.winimage.com/zLibDll/minizip.html ) + +When adding ZIP64 support into minizip it would result into risk of breaking compatibility with minizip 1.0. +All possible work was done for compatibility. + + +Background +--------------------- +When adding ZIP64 support Mathias Svensson found that Even Rouault have added ZIP64 +support for unzip.c into minizip for a open source project called gdal ( http://www.gdal.org/ ) + +That was used as a starting point. And after that ZIP64 support was added to zip.c +some refactoring and code cleanup was also done. + + +Changed from MiniZip 1.0 to MiniZip 1.1 +--------------------------------------- +* Added ZIP64 support for unzip ( by Even Rouault ) +* Added ZIP64 support for zip ( by Mathias Svensson ) +* Reverted some changed that Even Rouault did. +* Bunch of patches received from Gulles Vollant that he received for MiniZip from various users. +* Added unzip patch for BZIP Compression method (patch create by Daniel Borca) +* Added BZIP Compress method for zip +* Did some refactoring and code cleanup + + +Credits + + Gilles Vollant - Original MiniZip author + Even Rouault - ZIP64 unzip Support + Daniel Borca - BZip Compression method support in unzip + Mathias Svensson - ZIP64 zip support + Mathias Svensson - BZip Compression method support in zip + + Resources + + ZipLayout http://result42.com/projects/ZipFileLayout + Command line tool for Windows that shows the layout and information of the headers in a zip archive. + Used when debugging and validating the creation of zip files using MiniZip64 + + + ZIP App Note http://www.pkware.com/documents/casestudies/APPNOTE.TXT + Zip File specification + + +Notes. + * To be able to use BZip compression method in zip64.c or unzip64.c the BZIP2 lib is needed and HAVE_BZIP2 need to be defined. + +License +---------------------------------------------------------- + Condition of use and distribution are the same than zlib : + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. + +---------------------------------------------------------- + diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/minizip/configure.ac b/software/scsi2sd-util/zlib-1.2.8/contrib/minizip/configure.ac new file mode 100644 index 0000000..827a4e0 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/minizip/configure.ac @@ -0,0 +1,32 @@ +# -*- Autoconf -*- +# Process this file with autoconf to produce a configure script. + +AC_INIT([minizip], [1.2.8], [bugzilla.redhat.com]) +AC_CONFIG_SRCDIR([minizip.c]) +AM_INIT_AUTOMAKE([foreign]) +LT_INIT + +AC_MSG_CHECKING([whether to build example programs]) +AC_ARG_ENABLE([demos], AC_HELP_STRING([--enable-demos], [build example programs])) +AM_CONDITIONAL([COND_DEMOS], [test "$enable_demos" = yes]) +if test "$enable_demos" = yes +then + AC_MSG_RESULT([yes]) +else + AC_MSG_RESULT([no]) +fi + +case "${host}" in + *-mingw* | mingw*) + WIN32="yes" + ;; + *) + ;; +esac +AM_CONDITIONAL([WIN32], [test "${WIN32}" = "yes"]) + + +AC_SUBST([HAVE_UNISTD_H], [0]) +AC_CHECK_HEADER([unistd.h], [HAVE_UNISTD_H=1], []) +AC_CONFIG_FILES([Makefile minizip.pc]) +AC_OUTPUT diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/minizip/crypt.h b/software/scsi2sd-util/zlib-1.2.8/contrib/minizip/crypt.h new file mode 100644 index 0000000..1e9e820 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/minizip/crypt.h @@ -0,0 +1,131 @@ +/* crypt.h -- base code for crypt/uncrypt ZIPfile + + + Version 1.01e, February 12th, 2005 + + Copyright (C) 1998-2005 Gilles Vollant + + This code is a modified version of crypting code in Infozip distribution + + The encryption/decryption parts of this source code (as opposed to the + non-echoing password parts) were originally written in Europe. The + whole source package can be freely distributed, including from the USA. + (Prior to January 2000, re-export from the US was a violation of US law.) + + This encryption code is a direct transcription of the algorithm from + Roger Schlafly, described by Phil Katz in the file appnote.txt. This + file (appnote.txt) is distributed with the PKZIP program (even in the + version without encryption capabilities). + + If you don't need crypting in your application, just define symbols + NOCRYPT and NOUNCRYPT. + + This code support the "Traditional PKWARE Encryption". + + The new AES encryption added on Zip format by Winzip (see the page + http://www.winzip.com/aes_info.htm ) and PKWare PKZip 5.x Strong + Encryption is not supported. +*/ + +#define CRC32(c, b) ((*(pcrc_32_tab+(((int)(c) ^ (b)) & 0xff))) ^ ((c) >> 8)) + +/*********************************************************************** + * Return the next byte in the pseudo-random sequence + */ +static int decrypt_byte(unsigned long* pkeys, const z_crc_t* pcrc_32_tab) +{ + unsigned temp; /* POTENTIAL BUG: temp*(temp^1) may overflow in an + * unpredictable manner on 16-bit systems; not a problem + * with any known compiler so far, though */ + + temp = ((unsigned)(*(pkeys+2)) & 0xffff) | 2; + return (int)(((temp * (temp ^ 1)) >> 8) & 0xff); +} + +/*********************************************************************** + * Update the encryption keys with the next byte of plain text + */ +static int update_keys(unsigned long* pkeys,const z_crc_t* pcrc_32_tab,int c) +{ + (*(pkeys+0)) = CRC32((*(pkeys+0)), c); + (*(pkeys+1)) += (*(pkeys+0)) & 0xff; + (*(pkeys+1)) = (*(pkeys+1)) * 134775813L + 1; + { + register int keyshift = (int)((*(pkeys+1)) >> 24); + (*(pkeys+2)) = CRC32((*(pkeys+2)), keyshift); + } + return c; +} + + +/*********************************************************************** + * Initialize the encryption keys and the random header according to + * the given password. + */ +static void init_keys(const char* passwd,unsigned long* pkeys,const z_crc_t* pcrc_32_tab) +{ + *(pkeys+0) = 305419896L; + *(pkeys+1) = 591751049L; + *(pkeys+2) = 878082192L; + while (*passwd != '\0') { + update_keys(pkeys,pcrc_32_tab,(int)*passwd); + passwd++; + } +} + +#define zdecode(pkeys,pcrc_32_tab,c) \ + (update_keys(pkeys,pcrc_32_tab,c ^= decrypt_byte(pkeys,pcrc_32_tab))) + +#define zencode(pkeys,pcrc_32_tab,c,t) \ + (t=decrypt_byte(pkeys,pcrc_32_tab), update_keys(pkeys,pcrc_32_tab,c), t^(c)) + +#ifdef INCLUDECRYPTINGCODE_IFCRYPTALLOWED + +#define RAND_HEAD_LEN 12 + /* "last resort" source for second part of crypt seed pattern */ +# ifndef ZCR_SEED2 +# define ZCR_SEED2 3141592654UL /* use PI as default pattern */ +# endif + +static int crypthead(const char* passwd, /* password string */ + unsigned char* buf, /* where to write header */ + int bufSize, + unsigned long* pkeys, + const z_crc_t* pcrc_32_tab, + unsigned long crcForCrypting) +{ + int n; /* index in random header */ + int t; /* temporary */ + int c; /* random byte */ + unsigned char header[RAND_HEAD_LEN-2]; /* random header */ + static unsigned calls = 0; /* ensure different random header each time */ + + if (bufSize> 7) & 0xff; + header[n] = (unsigned char)zencode(pkeys, pcrc_32_tab, c, t); + } + /* Encrypt random header (last two bytes is high word of crc) */ + init_keys(passwd, pkeys, pcrc_32_tab); + for (n = 0; n < RAND_HEAD_LEN-2; n++) + { + buf[n] = (unsigned char)zencode(pkeys, pcrc_32_tab, header[n], t); + } + buf[n++] = (unsigned char)zencode(pkeys, pcrc_32_tab, (int)(crcForCrypting >> 16) & 0xff, t); + buf[n++] = (unsigned char)zencode(pkeys, pcrc_32_tab, (int)(crcForCrypting >> 24) & 0xff, t); + return n; +} + +#endif diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/minizip/ioapi.c b/software/scsi2sd-util/zlib-1.2.8/contrib/minizip/ioapi.c new file mode 100644 index 0000000..7f5c191 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/minizip/ioapi.c @@ -0,0 +1,247 @@ +/* ioapi.h -- IO base function header for compress/uncompress .zip + part of the MiniZip project - ( http://www.winimage.com/zLibDll/minizip.html ) + + Copyright (C) 1998-2010 Gilles Vollant (minizip) ( http://www.winimage.com/zLibDll/minizip.html ) + + Modifications for Zip64 support + Copyright (C) 2009-2010 Mathias Svensson ( http://result42.com ) + + For more info read MiniZip_info.txt + +*/ + +#if defined(_WIN32) && (!(defined(_CRT_SECURE_NO_WARNINGS))) + #define _CRT_SECURE_NO_WARNINGS +#endif + +#if defined(__APPLE__) || defined(IOAPI_NO_64) +// In darwin and perhaps other BSD variants off_t is a 64 bit value, hence no need for specific 64 bit functions +#define FOPEN_FUNC(filename, mode) fopen(filename, mode) +#define FTELLO_FUNC(stream) ftello(stream) +#define FSEEKO_FUNC(stream, offset, origin) fseeko(stream, offset, origin) +#else +#define FOPEN_FUNC(filename, mode) fopen64(filename, mode) +#define FTELLO_FUNC(stream) ftello64(stream) +#define FSEEKO_FUNC(stream, offset, origin) fseeko64(stream, offset, origin) +#endif + + +#include "ioapi.h" + +voidpf call_zopen64 (const zlib_filefunc64_32_def* pfilefunc,const void*filename,int mode) +{ + if (pfilefunc->zfile_func64.zopen64_file != NULL) + return (*(pfilefunc->zfile_func64.zopen64_file)) (pfilefunc->zfile_func64.opaque,filename,mode); + else + { + return (*(pfilefunc->zopen32_file))(pfilefunc->zfile_func64.opaque,(const char*)filename,mode); + } +} + +long call_zseek64 (const zlib_filefunc64_32_def* pfilefunc,voidpf filestream, ZPOS64_T offset, int origin) +{ + if (pfilefunc->zfile_func64.zseek64_file != NULL) + return (*(pfilefunc->zfile_func64.zseek64_file)) (pfilefunc->zfile_func64.opaque,filestream,offset,origin); + else + { + uLong offsetTruncated = (uLong)offset; + if (offsetTruncated != offset) + return -1; + else + return (*(pfilefunc->zseek32_file))(pfilefunc->zfile_func64.opaque,filestream,offsetTruncated,origin); + } +} + +ZPOS64_T call_ztell64 (const zlib_filefunc64_32_def* pfilefunc,voidpf filestream) +{ + if (pfilefunc->zfile_func64.zseek64_file != NULL) + return (*(pfilefunc->zfile_func64.ztell64_file)) (pfilefunc->zfile_func64.opaque,filestream); + else + { + uLong tell_uLong = (*(pfilefunc->ztell32_file))(pfilefunc->zfile_func64.opaque,filestream); + if ((tell_uLong) == MAXU32) + return (ZPOS64_T)-1; + else + return tell_uLong; + } +} + +void fill_zlib_filefunc64_32_def_from_filefunc32(zlib_filefunc64_32_def* p_filefunc64_32,const zlib_filefunc_def* p_filefunc32) +{ + p_filefunc64_32->zfile_func64.zopen64_file = NULL; + p_filefunc64_32->zopen32_file = p_filefunc32->zopen_file; + p_filefunc64_32->zfile_func64.zerror_file = p_filefunc32->zerror_file; + p_filefunc64_32->zfile_func64.zread_file = p_filefunc32->zread_file; + p_filefunc64_32->zfile_func64.zwrite_file = p_filefunc32->zwrite_file; + p_filefunc64_32->zfile_func64.ztell64_file = NULL; + p_filefunc64_32->zfile_func64.zseek64_file = NULL; + p_filefunc64_32->zfile_func64.zclose_file = p_filefunc32->zclose_file; + p_filefunc64_32->zfile_func64.zerror_file = p_filefunc32->zerror_file; + p_filefunc64_32->zfile_func64.opaque = p_filefunc32->opaque; + p_filefunc64_32->zseek32_file = p_filefunc32->zseek_file; + p_filefunc64_32->ztell32_file = p_filefunc32->ztell_file; +} + + + +static voidpf ZCALLBACK fopen_file_func OF((voidpf opaque, const char* filename, int mode)); +static uLong ZCALLBACK fread_file_func OF((voidpf opaque, voidpf stream, void* buf, uLong size)); +static uLong ZCALLBACK fwrite_file_func OF((voidpf opaque, voidpf stream, const void* buf,uLong size)); +static ZPOS64_T ZCALLBACK ftell64_file_func OF((voidpf opaque, voidpf stream)); +static long ZCALLBACK fseek64_file_func OF((voidpf opaque, voidpf stream, ZPOS64_T offset, int origin)); +static int ZCALLBACK fclose_file_func OF((voidpf opaque, voidpf stream)); +static int ZCALLBACK ferror_file_func OF((voidpf opaque, voidpf stream)); + +static voidpf ZCALLBACK fopen_file_func (voidpf opaque, const char* filename, int mode) +{ + FILE* file = NULL; + const char* mode_fopen = NULL; + if ((mode & ZLIB_FILEFUNC_MODE_READWRITEFILTER)==ZLIB_FILEFUNC_MODE_READ) + mode_fopen = "rb"; + else + if (mode & ZLIB_FILEFUNC_MODE_EXISTING) + mode_fopen = "r+b"; + else + if (mode & ZLIB_FILEFUNC_MODE_CREATE) + mode_fopen = "wb"; + + if ((filename!=NULL) && (mode_fopen != NULL)) + file = fopen(filename, mode_fopen); + return file; +} + +static voidpf ZCALLBACK fopen64_file_func (voidpf opaque, const void* filename, int mode) +{ + FILE* file = NULL; + const char* mode_fopen = NULL; + if ((mode & ZLIB_FILEFUNC_MODE_READWRITEFILTER)==ZLIB_FILEFUNC_MODE_READ) + mode_fopen = "rb"; + else + if (mode & ZLIB_FILEFUNC_MODE_EXISTING) + mode_fopen = "r+b"; + else + if (mode & ZLIB_FILEFUNC_MODE_CREATE) + mode_fopen = "wb"; + + if ((filename!=NULL) && (mode_fopen != NULL)) + file = FOPEN_FUNC((const char*)filename, mode_fopen); + return file; +} + + +static uLong ZCALLBACK fread_file_func (voidpf opaque, voidpf stream, void* buf, uLong size) +{ + uLong ret; + ret = (uLong)fread(buf, 1, (size_t)size, (FILE *)stream); + return ret; +} + +static uLong ZCALLBACK fwrite_file_func (voidpf opaque, voidpf stream, const void* buf, uLong size) +{ + uLong ret; + ret = (uLong)fwrite(buf, 1, (size_t)size, (FILE *)stream); + return ret; +} + +static long ZCALLBACK ftell_file_func (voidpf opaque, voidpf stream) +{ + long ret; + ret = ftell((FILE *)stream); + return ret; +} + + +static ZPOS64_T ZCALLBACK ftell64_file_func (voidpf opaque, voidpf stream) +{ + ZPOS64_T ret; + ret = FTELLO_FUNC((FILE *)stream); + return ret; +} + +static long ZCALLBACK fseek_file_func (voidpf opaque, voidpf stream, uLong offset, int origin) +{ + int fseek_origin=0; + long ret; + switch (origin) + { + case ZLIB_FILEFUNC_SEEK_CUR : + fseek_origin = SEEK_CUR; + break; + case ZLIB_FILEFUNC_SEEK_END : + fseek_origin = SEEK_END; + break; + case ZLIB_FILEFUNC_SEEK_SET : + fseek_origin = SEEK_SET; + break; + default: return -1; + } + ret = 0; + if (fseek((FILE *)stream, offset, fseek_origin) != 0) + ret = -1; + return ret; +} + +static long ZCALLBACK fseek64_file_func (voidpf opaque, voidpf stream, ZPOS64_T offset, int origin) +{ + int fseek_origin=0; + long ret; + switch (origin) + { + case ZLIB_FILEFUNC_SEEK_CUR : + fseek_origin = SEEK_CUR; + break; + case ZLIB_FILEFUNC_SEEK_END : + fseek_origin = SEEK_END; + break; + case ZLIB_FILEFUNC_SEEK_SET : + fseek_origin = SEEK_SET; + break; + default: return -1; + } + ret = 0; + + if(FSEEKO_FUNC((FILE *)stream, offset, fseek_origin) != 0) + ret = -1; + + return ret; +} + + +static int ZCALLBACK fclose_file_func (voidpf opaque, voidpf stream) +{ + int ret; + ret = fclose((FILE *)stream); + return ret; +} + +static int ZCALLBACK ferror_file_func (voidpf opaque, voidpf stream) +{ + int ret; + ret = ferror((FILE *)stream); + return ret; +} + +void fill_fopen_filefunc (pzlib_filefunc_def) + zlib_filefunc_def* pzlib_filefunc_def; +{ + pzlib_filefunc_def->zopen_file = fopen_file_func; + pzlib_filefunc_def->zread_file = fread_file_func; + pzlib_filefunc_def->zwrite_file = fwrite_file_func; + pzlib_filefunc_def->ztell_file = ftell_file_func; + pzlib_filefunc_def->zseek_file = fseek_file_func; + pzlib_filefunc_def->zclose_file = fclose_file_func; + pzlib_filefunc_def->zerror_file = ferror_file_func; + pzlib_filefunc_def->opaque = NULL; +} + +void fill_fopen64_filefunc (zlib_filefunc64_def* pzlib_filefunc_def) +{ + pzlib_filefunc_def->zopen64_file = fopen64_file_func; + pzlib_filefunc_def->zread_file = fread_file_func; + pzlib_filefunc_def->zwrite_file = fwrite_file_func; + pzlib_filefunc_def->ztell64_file = ftell64_file_func; + pzlib_filefunc_def->zseek64_file = fseek64_file_func; + pzlib_filefunc_def->zclose_file = fclose_file_func; + pzlib_filefunc_def->zerror_file = ferror_file_func; + pzlib_filefunc_def->opaque = NULL; +} diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/minizip/ioapi.h b/software/scsi2sd-util/zlib-1.2.8/contrib/minizip/ioapi.h new file mode 100644 index 0000000..8dcbdb0 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/minizip/ioapi.h @@ -0,0 +1,208 @@ +/* ioapi.h -- IO base function header for compress/uncompress .zip + part of the MiniZip project - ( http://www.winimage.com/zLibDll/minizip.html ) + + Copyright (C) 1998-2010 Gilles Vollant (minizip) ( http://www.winimage.com/zLibDll/minizip.html ) + + Modifications for Zip64 support + Copyright (C) 2009-2010 Mathias Svensson ( http://result42.com ) + + For more info read MiniZip_info.txt + + Changes + + Oct-2009 - Defined ZPOS64_T to fpos_t on windows and u_int64_t on linux. (might need to find a better why for this) + Oct-2009 - Change to fseeko64, ftello64 and fopen64 so large files would work on linux. + More if/def section may be needed to support other platforms + Oct-2009 - Defined fxxxx64 calls to normal fopen/ftell/fseek so they would compile on windows. + (but you should use iowin32.c for windows instead) + +*/ + +#ifndef _ZLIBIOAPI64_H +#define _ZLIBIOAPI64_H + +#if (!defined(_WIN32)) && (!defined(WIN32)) && (!defined(__APPLE__)) + + // Linux needs this to support file operation on files larger then 4+GB + // But might need better if/def to select just the platforms that needs them. + + #ifndef __USE_FILE_OFFSET64 + #define __USE_FILE_OFFSET64 + #endif + #ifndef __USE_LARGEFILE64 + #define __USE_LARGEFILE64 + #endif + #ifndef _LARGEFILE64_SOURCE + #define _LARGEFILE64_SOURCE + #endif + #ifndef _FILE_OFFSET_BIT + #define _FILE_OFFSET_BIT 64 + #endif + +#endif + +#include +#include +#include "zlib.h" + +#if defined(USE_FILE32API) +#define fopen64 fopen +#define ftello64 ftell +#define fseeko64 fseek +#else +#ifdef __FreeBSD__ +#define fopen64 fopen +#define ftello64 ftello +#define fseeko64 fseeko +#endif +#ifdef _MSC_VER + #define fopen64 fopen + #if (_MSC_VER >= 1400) && (!(defined(NO_MSCVER_FILE64_FUNC))) + #define ftello64 _ftelli64 + #define fseeko64 _fseeki64 + #else // old MSC + #define ftello64 ftell + #define fseeko64 fseek + #endif +#endif +#endif + +/* +#ifndef ZPOS64_T + #ifdef _WIN32 + #define ZPOS64_T fpos_t + #else + #include + #define ZPOS64_T uint64_t + #endif +#endif +*/ + +#ifdef HAVE_MINIZIP64_CONF_H +#include "mz64conf.h" +#endif + +/* a type choosen by DEFINE */ +#ifdef HAVE_64BIT_INT_CUSTOM +typedef 64BIT_INT_CUSTOM_TYPE ZPOS64_T; +#else +#ifdef HAS_STDINT_H +#include "stdint.h" +typedef uint64_t ZPOS64_T; +#else + +/* Maximum unsigned 32-bit value used as placeholder for zip64 */ +#define MAXU32 0xffffffff + +#if defined(_MSC_VER) || defined(__BORLANDC__) +typedef unsigned __int64 ZPOS64_T; +#else +typedef unsigned long long int ZPOS64_T; +#endif +#endif +#endif + + + +#ifdef __cplusplus +extern "C" { +#endif + + +#define ZLIB_FILEFUNC_SEEK_CUR (1) +#define ZLIB_FILEFUNC_SEEK_END (2) +#define ZLIB_FILEFUNC_SEEK_SET (0) + +#define ZLIB_FILEFUNC_MODE_READ (1) +#define ZLIB_FILEFUNC_MODE_WRITE (2) +#define ZLIB_FILEFUNC_MODE_READWRITEFILTER (3) + +#define ZLIB_FILEFUNC_MODE_EXISTING (4) +#define ZLIB_FILEFUNC_MODE_CREATE (8) + + +#ifndef ZCALLBACK + #if (defined(WIN32) || defined(_WIN32) || defined (WINDOWS) || defined (_WINDOWS)) && defined(CALLBACK) && defined (USEWINDOWS_CALLBACK) + #define ZCALLBACK CALLBACK + #else + #define ZCALLBACK + #endif +#endif + + + + +typedef voidpf (ZCALLBACK *open_file_func) OF((voidpf opaque, const char* filename, int mode)); +typedef uLong (ZCALLBACK *read_file_func) OF((voidpf opaque, voidpf stream, void* buf, uLong size)); +typedef uLong (ZCALLBACK *write_file_func) OF((voidpf opaque, voidpf stream, const void* buf, uLong size)); +typedef int (ZCALLBACK *close_file_func) OF((voidpf opaque, voidpf stream)); +typedef int (ZCALLBACK *testerror_file_func) OF((voidpf opaque, voidpf stream)); + +typedef long (ZCALLBACK *tell_file_func) OF((voidpf opaque, voidpf stream)); +typedef long (ZCALLBACK *seek_file_func) OF((voidpf opaque, voidpf stream, uLong offset, int origin)); + + +/* here is the "old" 32 bits structure structure */ +typedef struct zlib_filefunc_def_s +{ + open_file_func zopen_file; + read_file_func zread_file; + write_file_func zwrite_file; + tell_file_func ztell_file; + seek_file_func zseek_file; + close_file_func zclose_file; + testerror_file_func zerror_file; + voidpf opaque; +} zlib_filefunc_def; + +typedef ZPOS64_T (ZCALLBACK *tell64_file_func) OF((voidpf opaque, voidpf stream)); +typedef long (ZCALLBACK *seek64_file_func) OF((voidpf opaque, voidpf stream, ZPOS64_T offset, int origin)); +typedef voidpf (ZCALLBACK *open64_file_func) OF((voidpf opaque, const void* filename, int mode)); + +typedef struct zlib_filefunc64_def_s +{ + open64_file_func zopen64_file; + read_file_func zread_file; + write_file_func zwrite_file; + tell64_file_func ztell64_file; + seek64_file_func zseek64_file; + close_file_func zclose_file; + testerror_file_func zerror_file; + voidpf opaque; +} zlib_filefunc64_def; + +void fill_fopen64_filefunc OF((zlib_filefunc64_def* pzlib_filefunc_def)); +void fill_fopen_filefunc OF((zlib_filefunc_def* pzlib_filefunc_def)); + +/* now internal definition, only for zip.c and unzip.h */ +typedef struct zlib_filefunc64_32_def_s +{ + zlib_filefunc64_def zfile_func64; + open_file_func zopen32_file; + tell_file_func ztell32_file; + seek_file_func zseek32_file; +} zlib_filefunc64_32_def; + + +#define ZREAD64(filefunc,filestream,buf,size) ((*((filefunc).zfile_func64.zread_file)) ((filefunc).zfile_func64.opaque,filestream,buf,size)) +#define ZWRITE64(filefunc,filestream,buf,size) ((*((filefunc).zfile_func64.zwrite_file)) ((filefunc).zfile_func64.opaque,filestream,buf,size)) +//#define ZTELL64(filefunc,filestream) ((*((filefunc).ztell64_file)) ((filefunc).opaque,filestream)) +//#define ZSEEK64(filefunc,filestream,pos,mode) ((*((filefunc).zseek64_file)) ((filefunc).opaque,filestream,pos,mode)) +#define ZCLOSE64(filefunc,filestream) ((*((filefunc).zfile_func64.zclose_file)) ((filefunc).zfile_func64.opaque,filestream)) +#define ZERROR64(filefunc,filestream) ((*((filefunc).zfile_func64.zerror_file)) ((filefunc).zfile_func64.opaque,filestream)) + +voidpf call_zopen64 OF((const zlib_filefunc64_32_def* pfilefunc,const void*filename,int mode)); +long call_zseek64 OF((const zlib_filefunc64_32_def* pfilefunc,voidpf filestream, ZPOS64_T offset, int origin)); +ZPOS64_T call_ztell64 OF((const zlib_filefunc64_32_def* pfilefunc,voidpf filestream)); + +void fill_zlib_filefunc64_32_def_from_filefunc32(zlib_filefunc64_32_def* p_filefunc64_32,const zlib_filefunc_def* p_filefunc32); + +#define ZOPEN64(filefunc,filename,mode) (call_zopen64((&(filefunc)),(filename),(mode))) +#define ZTELL64(filefunc,filestream) (call_ztell64((&(filefunc)),(filestream))) +#define ZSEEK64(filefunc,filestream,pos,mode) (call_zseek64((&(filefunc)),(filestream),(pos),(mode))) + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/minizip/iowin32.c b/software/scsi2sd-util/zlib-1.2.8/contrib/minizip/iowin32.c new file mode 100644 index 0000000..a46d96c --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/minizip/iowin32.c @@ -0,0 +1,461 @@ +/* iowin32.c -- IO base function header for compress/uncompress .zip + Version 1.1, February 14h, 2010 + part of the MiniZip project - ( http://www.winimage.com/zLibDll/minizip.html ) + + Copyright (C) 1998-2010 Gilles Vollant (minizip) ( http://www.winimage.com/zLibDll/minizip.html ) + + Modifications for Zip64 support + Copyright (C) 2009-2010 Mathias Svensson ( http://result42.com ) + + For more info read MiniZip_info.txt + +*/ + +#include + +#include "zlib.h" +#include "ioapi.h" +#include "iowin32.h" + +#ifndef INVALID_HANDLE_VALUE +#define INVALID_HANDLE_VALUE (0xFFFFFFFF) +#endif + +#ifndef INVALID_SET_FILE_POINTER +#define INVALID_SET_FILE_POINTER ((DWORD)-1) +#endif + + +#if defined(WINAPI_FAMILY_PARTITION) && (!(defined(IOWIN32_USING_WINRT_API))) +#if WINAPI_FAMILY_PARTITION(WINAPI_PARTITION_APP) +#define IOWIN32_USING_WINRT_API 1 +#endif +#endif + +voidpf ZCALLBACK win32_open_file_func OF((voidpf opaque, const char* filename, int mode)); +uLong ZCALLBACK win32_read_file_func OF((voidpf opaque, voidpf stream, void* buf, uLong size)); +uLong ZCALLBACK win32_write_file_func OF((voidpf opaque, voidpf stream, const void* buf, uLong size)); +ZPOS64_T ZCALLBACK win32_tell64_file_func OF((voidpf opaque, voidpf stream)); +long ZCALLBACK win32_seek64_file_func OF((voidpf opaque, voidpf stream, ZPOS64_T offset, int origin)); +int ZCALLBACK win32_close_file_func OF((voidpf opaque, voidpf stream)); +int ZCALLBACK win32_error_file_func OF((voidpf opaque, voidpf stream)); + +typedef struct +{ + HANDLE hf; + int error; +} WIN32FILE_IOWIN; + + +static void win32_translate_open_mode(int mode, + DWORD* lpdwDesiredAccess, + DWORD* lpdwCreationDisposition, + DWORD* lpdwShareMode, + DWORD* lpdwFlagsAndAttributes) +{ + *lpdwDesiredAccess = *lpdwShareMode = *lpdwFlagsAndAttributes = *lpdwCreationDisposition = 0; + + if ((mode & ZLIB_FILEFUNC_MODE_READWRITEFILTER)==ZLIB_FILEFUNC_MODE_READ) + { + *lpdwDesiredAccess = GENERIC_READ; + *lpdwCreationDisposition = OPEN_EXISTING; + *lpdwShareMode = FILE_SHARE_READ; + } + else if (mode & ZLIB_FILEFUNC_MODE_EXISTING) + { + *lpdwDesiredAccess = GENERIC_WRITE | GENERIC_READ; + *lpdwCreationDisposition = OPEN_EXISTING; + } + else if (mode & ZLIB_FILEFUNC_MODE_CREATE) + { + *lpdwDesiredAccess = GENERIC_WRITE | GENERIC_READ; + *lpdwCreationDisposition = CREATE_ALWAYS; + } +} + +static voidpf win32_build_iowin(HANDLE hFile) +{ + voidpf ret=NULL; + + if ((hFile != NULL) && (hFile != INVALID_HANDLE_VALUE)) + { + WIN32FILE_IOWIN w32fiow; + w32fiow.hf = hFile; + w32fiow.error = 0; + ret = malloc(sizeof(WIN32FILE_IOWIN)); + + if (ret==NULL) + CloseHandle(hFile); + else + *((WIN32FILE_IOWIN*)ret) = w32fiow; + } + return ret; +} + +voidpf ZCALLBACK win32_open64_file_func (voidpf opaque,const void* filename,int mode) +{ + const char* mode_fopen = NULL; + DWORD dwDesiredAccess,dwCreationDisposition,dwShareMode,dwFlagsAndAttributes ; + HANDLE hFile = NULL; + + win32_translate_open_mode(mode,&dwDesiredAccess,&dwCreationDisposition,&dwShareMode,&dwFlagsAndAttributes); + +#ifdef IOWIN32_USING_WINRT_API +#ifdef UNICODE + if ((filename!=NULL) && (dwDesiredAccess != 0)) + hFile = CreateFile2((LPCTSTR)filename, dwDesiredAccess, dwShareMode, dwCreationDisposition, NULL); +#else + if ((filename!=NULL) && (dwDesiredAccess != 0)) + { + WCHAR filenameW[FILENAME_MAX + 0x200 + 1]; + MultiByteToWideChar(CP_ACP,0,(const char*)filename,-1,filenameW,FILENAME_MAX + 0x200); + hFile = CreateFile2(filenameW, dwDesiredAccess, dwShareMode, dwCreationDisposition, NULL); + } +#endif +#else + if ((filename!=NULL) && (dwDesiredAccess != 0)) + hFile = CreateFile((LPCTSTR)filename, dwDesiredAccess, dwShareMode, NULL, dwCreationDisposition, dwFlagsAndAttributes, NULL); +#endif + + return win32_build_iowin(hFile); +} + + +voidpf ZCALLBACK win32_open64_file_funcA (voidpf opaque,const void* filename,int mode) +{ + const char* mode_fopen = NULL; + DWORD dwDesiredAccess,dwCreationDisposition,dwShareMode,dwFlagsAndAttributes ; + HANDLE hFile = NULL; + + win32_translate_open_mode(mode,&dwDesiredAccess,&dwCreationDisposition,&dwShareMode,&dwFlagsAndAttributes); + +#ifdef IOWIN32_USING_WINRT_API + if ((filename!=NULL) && (dwDesiredAccess != 0)) + { + WCHAR filenameW[FILENAME_MAX + 0x200 + 1]; + MultiByteToWideChar(CP_ACP,0,(const char*)filename,-1,filenameW,FILENAME_MAX + 0x200); + hFile = CreateFile2(filenameW, dwDesiredAccess, dwShareMode, dwCreationDisposition, NULL); + } +#else + if ((filename!=NULL) && (dwDesiredAccess != 0)) + hFile = CreateFileA((LPCSTR)filename, dwDesiredAccess, dwShareMode, NULL, dwCreationDisposition, dwFlagsAndAttributes, NULL); +#endif + + return win32_build_iowin(hFile); +} + + +voidpf ZCALLBACK win32_open64_file_funcW (voidpf opaque,const void* filename,int mode) +{ + const char* mode_fopen = NULL; + DWORD dwDesiredAccess,dwCreationDisposition,dwShareMode,dwFlagsAndAttributes ; + HANDLE hFile = NULL; + + win32_translate_open_mode(mode,&dwDesiredAccess,&dwCreationDisposition,&dwShareMode,&dwFlagsAndAttributes); + +#ifdef IOWIN32_USING_WINRT_API + if ((filename!=NULL) && (dwDesiredAccess != 0)) + hFile = CreateFile2((LPCWSTR)filename, dwDesiredAccess, dwShareMode, dwCreationDisposition,NULL); +#else + if ((filename!=NULL) && (dwDesiredAccess != 0)) + hFile = CreateFileW((LPCWSTR)filename, dwDesiredAccess, dwShareMode, NULL, dwCreationDisposition, dwFlagsAndAttributes, NULL); +#endif + + return win32_build_iowin(hFile); +} + + +voidpf ZCALLBACK win32_open_file_func (voidpf opaque,const char* filename,int mode) +{ + const char* mode_fopen = NULL; + DWORD dwDesiredAccess,dwCreationDisposition,dwShareMode,dwFlagsAndAttributes ; + HANDLE hFile = NULL; + + win32_translate_open_mode(mode,&dwDesiredAccess,&dwCreationDisposition,&dwShareMode,&dwFlagsAndAttributes); + +#ifdef IOWIN32_USING_WINRT_API +#ifdef UNICODE + if ((filename!=NULL) && (dwDesiredAccess != 0)) + hFile = CreateFile2((LPCTSTR)filename, dwDesiredAccess, dwShareMode, dwCreationDisposition, NULL); +#else + if ((filename!=NULL) && (dwDesiredAccess != 0)) + { + WCHAR filenameW[FILENAME_MAX + 0x200 + 1]; + MultiByteToWideChar(CP_ACP,0,(const char*)filename,-1,filenameW,FILENAME_MAX + 0x200); + hFile = CreateFile2(filenameW, dwDesiredAccess, dwShareMode, dwCreationDisposition, NULL); + } +#endif +#else + if ((filename!=NULL) && (dwDesiredAccess != 0)) + hFile = CreateFile((LPCTSTR)filename, dwDesiredAccess, dwShareMode, NULL, dwCreationDisposition, dwFlagsAndAttributes, NULL); +#endif + + return win32_build_iowin(hFile); +} + + +uLong ZCALLBACK win32_read_file_func (voidpf opaque, voidpf stream, void* buf,uLong size) +{ + uLong ret=0; + HANDLE hFile = NULL; + if (stream!=NULL) + hFile = ((WIN32FILE_IOWIN*)stream) -> hf; + + if (hFile != NULL) + { + if (!ReadFile(hFile, buf, size, &ret, NULL)) + { + DWORD dwErr = GetLastError(); + if (dwErr == ERROR_HANDLE_EOF) + dwErr = 0; + ((WIN32FILE_IOWIN*)stream) -> error=(int)dwErr; + } + } + + return ret; +} + + +uLong ZCALLBACK win32_write_file_func (voidpf opaque,voidpf stream,const void* buf,uLong size) +{ + uLong ret=0; + HANDLE hFile = NULL; + if (stream!=NULL) + hFile = ((WIN32FILE_IOWIN*)stream) -> hf; + + if (hFile != NULL) + { + if (!WriteFile(hFile, buf, size, &ret, NULL)) + { + DWORD dwErr = GetLastError(); + if (dwErr == ERROR_HANDLE_EOF) + dwErr = 0; + ((WIN32FILE_IOWIN*)stream) -> error=(int)dwErr; + } + } + + return ret; +} + +static BOOL MySetFilePointerEx(HANDLE hFile, LARGE_INTEGER pos, LARGE_INTEGER *newPos, DWORD dwMoveMethod) +{ +#ifdef IOWIN32_USING_WINRT_API + return SetFilePointerEx(hFile, pos, newPos, dwMoveMethod); +#else + LONG lHigh = pos.HighPart; + DWORD dwNewPos = SetFilePointer(hFile, pos.LowPart, &lHigh, FILE_CURRENT); + BOOL fOk = TRUE; + if (dwNewPos == 0xFFFFFFFF) + if (GetLastError() != NO_ERROR) + fOk = FALSE; + if ((newPos != NULL) && (fOk)) + { + newPos->LowPart = dwNewPos; + newPos->HighPart = lHigh; + } + return fOk; +#endif +} + +long ZCALLBACK win32_tell_file_func (voidpf opaque,voidpf stream) +{ + long ret=-1; + HANDLE hFile = NULL; + if (stream!=NULL) + hFile = ((WIN32FILE_IOWIN*)stream) -> hf; + if (hFile != NULL) + { + LARGE_INTEGER pos; + pos.QuadPart = 0; + + if (!MySetFilePointerEx(hFile, pos, &pos, FILE_CURRENT)) + { + DWORD dwErr = GetLastError(); + ((WIN32FILE_IOWIN*)stream) -> error=(int)dwErr; + ret = -1; + } + else + ret=(long)pos.LowPart; + } + return ret; +} + +ZPOS64_T ZCALLBACK win32_tell64_file_func (voidpf opaque, voidpf stream) +{ + ZPOS64_T ret= (ZPOS64_T)-1; + HANDLE hFile = NULL; + if (stream!=NULL) + hFile = ((WIN32FILE_IOWIN*)stream)->hf; + + if (hFile) + { + LARGE_INTEGER pos; + pos.QuadPart = 0; + + if (!MySetFilePointerEx(hFile, pos, &pos, FILE_CURRENT)) + { + DWORD dwErr = GetLastError(); + ((WIN32FILE_IOWIN*)stream) -> error=(int)dwErr; + ret = (ZPOS64_T)-1; + } + else + ret=pos.QuadPart; + } + return ret; +} + + +long ZCALLBACK win32_seek_file_func (voidpf opaque,voidpf stream,uLong offset,int origin) +{ + DWORD dwMoveMethod=0xFFFFFFFF; + HANDLE hFile = NULL; + + long ret=-1; + if (stream!=NULL) + hFile = ((WIN32FILE_IOWIN*)stream) -> hf; + switch (origin) + { + case ZLIB_FILEFUNC_SEEK_CUR : + dwMoveMethod = FILE_CURRENT; + break; + case ZLIB_FILEFUNC_SEEK_END : + dwMoveMethod = FILE_END; + break; + case ZLIB_FILEFUNC_SEEK_SET : + dwMoveMethod = FILE_BEGIN; + break; + default: return -1; + } + + if (hFile != NULL) + { + LARGE_INTEGER pos; + pos.QuadPart = offset; + if (!MySetFilePointerEx(hFile, pos, NULL, dwMoveMethod)) + { + DWORD dwErr = GetLastError(); + ((WIN32FILE_IOWIN*)stream) -> error=(int)dwErr; + ret = -1; + } + else + ret=0; + } + return ret; +} + +long ZCALLBACK win32_seek64_file_func (voidpf opaque, voidpf stream,ZPOS64_T offset,int origin) +{ + DWORD dwMoveMethod=0xFFFFFFFF; + HANDLE hFile = NULL; + long ret=-1; + + if (stream!=NULL) + hFile = ((WIN32FILE_IOWIN*)stream)->hf; + + switch (origin) + { + case ZLIB_FILEFUNC_SEEK_CUR : + dwMoveMethod = FILE_CURRENT; + break; + case ZLIB_FILEFUNC_SEEK_END : + dwMoveMethod = FILE_END; + break; + case ZLIB_FILEFUNC_SEEK_SET : + dwMoveMethod = FILE_BEGIN; + break; + default: return -1; + } + + if (hFile) + { + LARGE_INTEGER pos; + pos.QuadPart = offset; + if (!MySetFilePointerEx(hFile, pos, NULL, FILE_CURRENT)) + { + DWORD dwErr = GetLastError(); + ((WIN32FILE_IOWIN*)stream) -> error=(int)dwErr; + ret = -1; + } + else + ret=0; + } + return ret; +} + +int ZCALLBACK win32_close_file_func (voidpf opaque, voidpf stream) +{ + int ret=-1; + + if (stream!=NULL) + { + HANDLE hFile; + hFile = ((WIN32FILE_IOWIN*)stream) -> hf; + if (hFile != NULL) + { + CloseHandle(hFile); + ret=0; + } + free(stream); + } + return ret; +} + +int ZCALLBACK win32_error_file_func (voidpf opaque,voidpf stream) +{ + int ret=-1; + if (stream!=NULL) + { + ret = ((WIN32FILE_IOWIN*)stream) -> error; + } + return ret; +} + +void fill_win32_filefunc (zlib_filefunc_def* pzlib_filefunc_def) +{ + pzlib_filefunc_def->zopen_file = win32_open_file_func; + pzlib_filefunc_def->zread_file = win32_read_file_func; + pzlib_filefunc_def->zwrite_file = win32_write_file_func; + pzlib_filefunc_def->ztell_file = win32_tell_file_func; + pzlib_filefunc_def->zseek_file = win32_seek_file_func; + pzlib_filefunc_def->zclose_file = win32_close_file_func; + pzlib_filefunc_def->zerror_file = win32_error_file_func; + pzlib_filefunc_def->opaque = NULL; +} + +void fill_win32_filefunc64(zlib_filefunc64_def* pzlib_filefunc_def) +{ + pzlib_filefunc_def->zopen64_file = win32_open64_file_func; + pzlib_filefunc_def->zread_file = win32_read_file_func; + pzlib_filefunc_def->zwrite_file = win32_write_file_func; + pzlib_filefunc_def->ztell64_file = win32_tell64_file_func; + pzlib_filefunc_def->zseek64_file = win32_seek64_file_func; + pzlib_filefunc_def->zclose_file = win32_close_file_func; + pzlib_filefunc_def->zerror_file = win32_error_file_func; + pzlib_filefunc_def->opaque = NULL; +} + + +void fill_win32_filefunc64A(zlib_filefunc64_def* pzlib_filefunc_def) +{ + pzlib_filefunc_def->zopen64_file = win32_open64_file_funcA; + pzlib_filefunc_def->zread_file = win32_read_file_func; + pzlib_filefunc_def->zwrite_file = win32_write_file_func; + pzlib_filefunc_def->ztell64_file = win32_tell64_file_func; + pzlib_filefunc_def->zseek64_file = win32_seek64_file_func; + pzlib_filefunc_def->zclose_file = win32_close_file_func; + pzlib_filefunc_def->zerror_file = win32_error_file_func; + pzlib_filefunc_def->opaque = NULL; +} + + +void fill_win32_filefunc64W(zlib_filefunc64_def* pzlib_filefunc_def) +{ + pzlib_filefunc_def->zopen64_file = win32_open64_file_funcW; + pzlib_filefunc_def->zread_file = win32_read_file_func; + pzlib_filefunc_def->zwrite_file = win32_write_file_func; + pzlib_filefunc_def->ztell64_file = win32_tell64_file_func; + pzlib_filefunc_def->zseek64_file = win32_seek64_file_func; + pzlib_filefunc_def->zclose_file = win32_close_file_func; + pzlib_filefunc_def->zerror_file = win32_error_file_func; + pzlib_filefunc_def->opaque = NULL; +} diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/minizip/iowin32.h b/software/scsi2sd-util/zlib-1.2.8/contrib/minizip/iowin32.h new file mode 100644 index 0000000..0ca0969 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/minizip/iowin32.h @@ -0,0 +1,28 @@ +/* iowin32.h -- IO base function header for compress/uncompress .zip + Version 1.1, February 14h, 2010 + part of the MiniZip project - ( http://www.winimage.com/zLibDll/minizip.html ) + + Copyright (C) 1998-2010 Gilles Vollant (minizip) ( http://www.winimage.com/zLibDll/minizip.html ) + + Modifications for Zip64 support + Copyright (C) 2009-2010 Mathias Svensson ( http://result42.com ) + + For more info read MiniZip_info.txt + +*/ + +#include + + +#ifdef __cplusplus +extern "C" { +#endif + +void fill_win32_filefunc OF((zlib_filefunc_def* pzlib_filefunc_def)); +void fill_win32_filefunc64 OF((zlib_filefunc64_def* pzlib_filefunc_def)); +void fill_win32_filefunc64A OF((zlib_filefunc64_def* pzlib_filefunc_def)); +void fill_win32_filefunc64W OF((zlib_filefunc64_def* pzlib_filefunc_def)); + +#ifdef __cplusplus +} +#endif diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/minizip/make_vms.com b/software/scsi2sd-util/zlib-1.2.8/contrib/minizip/make_vms.com new file mode 100644 index 0000000..9ac13a9 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/minizip/make_vms.com @@ -0,0 +1,25 @@ +$ if f$search("ioapi.h_orig") .eqs. "" then copy ioapi.h ioapi.h_orig +$ open/write zdef vmsdefs.h +$ copy sys$input: zdef +$ deck +#define unix +#define fill_zlib_filefunc64_32_def_from_filefunc32 fillzffunc64from +#define Write_Zip64EndOfCentralDirectoryLocator Write_Zip64EoDLocator +#define Write_Zip64EndOfCentralDirectoryRecord Write_Zip64EoDRecord +#define Write_EndOfCentralDirectoryRecord Write_EoDRecord +$ eod +$ close zdef +$ copy vmsdefs.h,ioapi.h_orig ioapi.h +$ cc/include=[--]/prefix=all ioapi.c +$ cc/include=[--]/prefix=all miniunz.c +$ cc/include=[--]/prefix=all unzip.c +$ cc/include=[--]/prefix=all minizip.c +$ cc/include=[--]/prefix=all zip.c +$ link miniunz,unzip,ioapi,[--]libz.olb/lib +$ link minizip,zip,ioapi,[--]libz.olb/lib +$ mcr []minizip test minizip_info.txt +$ mcr []miniunz -l test.zip +$ rename minizip_info.txt; minizip_info.txt_old +$ mcr []miniunz test.zip +$ delete test.zip;* +$exit diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/minizip/miniunz.c b/software/scsi2sd-util/zlib-1.2.8/contrib/minizip/miniunz.c new file mode 100644 index 0000000..3d65401 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/minizip/miniunz.c @@ -0,0 +1,660 @@ +/* + miniunz.c + Version 1.1, February 14h, 2010 + sample part of the MiniZip project - ( http://www.winimage.com/zLibDll/minizip.html ) + + Copyright (C) 1998-2010 Gilles Vollant (minizip) ( http://www.winimage.com/zLibDll/minizip.html ) + + Modifications of Unzip for Zip64 + Copyright (C) 2007-2008 Even Rouault + + Modifications for Zip64 support on both zip and unzip + Copyright (C) 2009-2010 Mathias Svensson ( http://result42.com ) +*/ + +#if (!defined(_WIN32)) && (!defined(WIN32)) && (!defined(__APPLE__)) + #ifndef __USE_FILE_OFFSET64 + #define __USE_FILE_OFFSET64 + #endif + #ifndef __USE_LARGEFILE64 + #define __USE_LARGEFILE64 + #endif + #ifndef _LARGEFILE64_SOURCE + #define _LARGEFILE64_SOURCE + #endif + #ifndef _FILE_OFFSET_BIT + #define _FILE_OFFSET_BIT 64 + #endif +#endif + +#ifdef __APPLE__ +// In darwin and perhaps other BSD variants off_t is a 64 bit value, hence no need for specific 64 bit functions +#define FOPEN_FUNC(filename, mode) fopen(filename, mode) +#define FTELLO_FUNC(stream) ftello(stream) +#define FSEEKO_FUNC(stream, offset, origin) fseeko(stream, offset, origin) +#else +#define FOPEN_FUNC(filename, mode) fopen64(filename, mode) +#define FTELLO_FUNC(stream) ftello64(stream) +#define FSEEKO_FUNC(stream, offset, origin) fseeko64(stream, offset, origin) +#endif + + +#include +#include +#include +#include +#include +#include + +#ifdef _WIN32 +# include +# include +#else +# include +# include +#endif + + +#include "unzip.h" + +#define CASESENSITIVITY (0) +#define WRITEBUFFERSIZE (8192) +#define MAXFILENAME (256) + +#ifdef _WIN32 +#define USEWIN32IOAPI +#include "iowin32.h" +#endif +/* + mini unzip, demo of unzip package + + usage : + Usage : miniunz [-exvlo] file.zip [file_to_extract] [-d extractdir] + + list the file in the zipfile, and print the content of FILE_ID.ZIP or README.TXT + if it exists +*/ + + +/* change_file_date : change the date/time of a file + filename : the filename of the file where date/time must be modified + dosdate : the new date at the MSDos format (4 bytes) + tmu_date : the SAME new date at the tm_unz format */ +void change_file_date(filename,dosdate,tmu_date) + const char *filename; + uLong dosdate; + tm_unz tmu_date; +{ +#ifdef _WIN32 + HANDLE hFile; + FILETIME ftm,ftLocal,ftCreate,ftLastAcc,ftLastWrite; + + hFile = CreateFileA(filename,GENERIC_READ | GENERIC_WRITE, + 0,NULL,OPEN_EXISTING,0,NULL); + GetFileTime(hFile,&ftCreate,&ftLastAcc,&ftLastWrite); + DosDateTimeToFileTime((WORD)(dosdate>>16),(WORD)dosdate,&ftLocal); + LocalFileTimeToFileTime(&ftLocal,&ftm); + SetFileTime(hFile,&ftm,&ftLastAcc,&ftm); + CloseHandle(hFile); +#else +#ifdef unix || __APPLE__ + struct utimbuf ut; + struct tm newdate; + newdate.tm_sec = tmu_date.tm_sec; + newdate.tm_min=tmu_date.tm_min; + newdate.tm_hour=tmu_date.tm_hour; + newdate.tm_mday=tmu_date.tm_mday; + newdate.tm_mon=tmu_date.tm_mon; + if (tmu_date.tm_year > 1900) + newdate.tm_year=tmu_date.tm_year - 1900; + else + newdate.tm_year=tmu_date.tm_year ; + newdate.tm_isdst=-1; + + ut.actime=ut.modtime=mktime(&newdate); + utime(filename,&ut); +#endif +#endif +} + + +/* mymkdir and change_file_date are not 100 % portable + As I don't know well Unix, I wait feedback for the unix portion */ + +int mymkdir(dirname) + const char* dirname; +{ + int ret=0; +#ifdef _WIN32 + ret = _mkdir(dirname); +#elif unix + ret = mkdir (dirname,0775); +#elif __APPLE__ + ret = mkdir (dirname,0775); +#endif + return ret; +} + +int makedir (newdir) + char *newdir; +{ + char *buffer ; + char *p; + int len = (int)strlen(newdir); + + if (len <= 0) + return 0; + + buffer = (char*)malloc(len+1); + if (buffer==NULL) + { + printf("Error allocating memory\n"); + return UNZ_INTERNALERROR; + } + strcpy(buffer,newdir); + + if (buffer[len-1] == '/') { + buffer[len-1] = '\0'; + } + if (mymkdir(buffer) == 0) + { + free(buffer); + return 1; + } + + p = buffer+1; + while (1) + { + char hold; + + while(*p && *p != '\\' && *p != '/') + p++; + hold = *p; + *p = 0; + if ((mymkdir(buffer) == -1) && (errno == ENOENT)) + { + printf("couldn't create directory %s\n",buffer); + free(buffer); + return 0; + } + if (hold == 0) + break; + *p++ = hold; + } + free(buffer); + return 1; +} + +void do_banner() +{ + printf("MiniUnz 1.01b, demo of zLib + Unz package written by Gilles Vollant\n"); + printf("more info at http://www.winimage.com/zLibDll/unzip.html\n\n"); +} + +void do_help() +{ + printf("Usage : miniunz [-e] [-x] [-v] [-l] [-o] [-p password] file.zip [file_to_extr.] [-d extractdir]\n\n" \ + " -e Extract without pathname (junk paths)\n" \ + " -x Extract with pathname\n" \ + " -v list files\n" \ + " -l list files\n" \ + " -d directory to extract into\n" \ + " -o overwrite files without prompting\n" \ + " -p extract crypted file using password\n\n"); +} + +void Display64BitsSize(ZPOS64_T n, int size_char) +{ + /* to avoid compatibility problem , we do here the conversion */ + char number[21]; + int offset=19; + int pos_string = 19; + number[20]=0; + for (;;) { + number[offset]=(char)((n%10)+'0'); + if (number[offset] != '0') + pos_string=offset; + n/=10; + if (offset==0) + break; + offset--; + } + { + int size_display_string = 19-pos_string; + while (size_char > size_display_string) + { + size_char--; + printf(" "); + } + } + + printf("%s",&number[pos_string]); +} + +int do_list(uf) + unzFile uf; +{ + uLong i; + unz_global_info64 gi; + int err; + + err = unzGetGlobalInfo64(uf,&gi); + if (err!=UNZ_OK) + printf("error %d with zipfile in unzGetGlobalInfo \n",err); + printf(" Length Method Size Ratio Date Time CRC-32 Name\n"); + printf(" ------ ------ ---- ----- ---- ---- ------ ----\n"); + for (i=0;i0) + ratio = (uLong)((file_info.compressed_size*100)/file_info.uncompressed_size); + + /* display a '*' if the file is crypted */ + if ((file_info.flag & 1) != 0) + charCrypt='*'; + + if (file_info.compression_method==0) + string_method="Stored"; + else + if (file_info.compression_method==Z_DEFLATED) + { + uInt iLevel=(uInt)((file_info.flag & 0x6)/2); + if (iLevel==0) + string_method="Defl:N"; + else if (iLevel==1) + string_method="Defl:X"; + else if ((iLevel==2) || (iLevel==3)) + string_method="Defl:F"; /* 2:fast , 3 : extra fast*/ + } + else + if (file_info.compression_method==Z_BZIP2ED) + { + string_method="BZip2 "; + } + else + string_method="Unkn. "; + + Display64BitsSize(file_info.uncompressed_size,7); + printf(" %6s%c",string_method,charCrypt); + Display64BitsSize(file_info.compressed_size,7); + printf(" %3lu%% %2.2lu-%2.2lu-%2.2lu %2.2lu:%2.2lu %8.8lx %s\n", + ratio, + (uLong)file_info.tmu_date.tm_mon + 1, + (uLong)file_info.tmu_date.tm_mday, + (uLong)file_info.tmu_date.tm_year % 100, + (uLong)file_info.tmu_date.tm_hour,(uLong)file_info.tmu_date.tm_min, + (uLong)file_info.crc,filename_inzip); + if ((i+1)='a') && (rep<='z')) + rep -= 0x20; + } + while ((rep!='Y') && (rep!='N') && (rep!='A')); + } + + if (rep == 'N') + skip = 1; + + if (rep == 'A') + *popt_overwrite=1; + } + + if ((skip==0) && (err==UNZ_OK)) + { + fout=FOPEN_FUNC(write_filename,"wb"); + /* some zipfile don't contain directory alone before file */ + if ((fout==NULL) && ((*popt_extract_without_path)==0) && + (filename_withoutpath!=(char*)filename_inzip)) + { + char c=*(filename_withoutpath-1); + *(filename_withoutpath-1)='\0'; + makedir(write_filename); + *(filename_withoutpath-1)=c; + fout=FOPEN_FUNC(write_filename,"wb"); + } + + if (fout==NULL) + { + printf("error opening %s\n",write_filename); + } + } + + if (fout!=NULL) + { + printf(" extracting: %s\n",write_filename); + + do + { + err = unzReadCurrentFile(uf,buf,size_buf); + if (err<0) + { + printf("error %d with zipfile in unzReadCurrentFile\n",err); + break; + } + if (err>0) + if (fwrite(buf,err,1,fout)!=1) + { + printf("error in writing extracted file\n"); + err=UNZ_ERRNO; + break; + } + } + while (err>0); + if (fout) + fclose(fout); + + if (err==0) + change_file_date(write_filename,file_info.dosDate, + file_info.tmu_date); + } + + if (err==UNZ_OK) + { + err = unzCloseCurrentFile (uf); + if (err!=UNZ_OK) + { + printf("error %d with zipfile in unzCloseCurrentFile\n",err); + } + } + else + unzCloseCurrentFile(uf); /* don't lose the error */ + } + + free(buf); + return err; +} + + +int do_extract(uf,opt_extract_without_path,opt_overwrite,password) + unzFile uf; + int opt_extract_without_path; + int opt_overwrite; + const char* password; +{ + uLong i; + unz_global_info64 gi; + int err; + FILE* fout=NULL; + + err = unzGetGlobalInfo64(uf,&gi); + if (err!=UNZ_OK) + printf("error %d with zipfile in unzGetGlobalInfo \n",err); + + for (i=0;i insert n+1 empty lines +.\" for manpage-specific macros, see man(7) +.SH NAME +miniunzip - uncompress and examine ZIP archives +.SH SYNOPSIS +.B miniunzip +.RI [ -exvlo ] +zipfile [ files_to_extract ] [-d tempdir] +.SH DESCRIPTION +.B minizip +is a simple tool which allows the extraction of compressed file +archives in the ZIP format used by the MS-DOS utility PKZIP. It was +written as a demonstration of the +.IR zlib (3) +library and therefore lack many of the features of the +.IR unzip (1) +program. +.SH OPTIONS +A number of options are supported. With the exception of +.BI \-d\ tempdir +these must be supplied before any +other arguments and are: +.TP +.BI \-l\ ,\ \-\-v +List the files in the archive without extracting them. +.TP +.B \-o +Overwrite files without prompting for confirmation. +.TP +.B \-x +Extract files (default). +.PP +The +.I zipfile +argument is the name of the archive to process. The next argument can be used +to specify a single file to extract from the archive. + +Lastly, the following option can be specified at the end of the command-line: +.TP +.BI \-d\ tempdir +Extract the archive in the directory +.I tempdir +rather than the current directory. +.SH SEE ALSO +.BR minizip (1), +.BR zlib (3), +.BR unzip (1). +.SH AUTHOR +This program was written by Gilles Vollant. This manual page was +written by Mark Brown . The -d tempdir option +was added by Dirk Eddelbuettel . diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/minizip/minizip.1 b/software/scsi2sd-util/zlib-1.2.8/contrib/minizip/minizip.1 new file mode 100644 index 0000000..1154484 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/minizip/minizip.1 @@ -0,0 +1,46 @@ +.\" Hey, EMACS: -*- nroff -*- +.TH minizip 1 "May 2, 2001" +.\" Please adjust this date whenever revising the manpage. +.\" +.\" Some roff macros, for reference: +.\" .nh disable hyphenation +.\" .hy enable hyphenation +.\" .ad l left justify +.\" .ad b justify to both left and right margins +.\" .nf disable filling +.\" .fi enable filling +.\" .br insert line break +.\" .sp insert n+1 empty lines +.\" for manpage-specific macros, see man(7) +.SH NAME +minizip - create ZIP archives +.SH SYNOPSIS +.B minizip +.RI [ -o ] +zipfile [ " files" ... ] +.SH DESCRIPTION +.B minizip +is a simple tool which allows the creation of compressed file archives +in the ZIP format used by the MS-DOS utility PKZIP. It was written as +a demonstration of the +.IR zlib (3) +library and therefore lack many of the features of the +.IR zip (1) +program. +.SH OPTIONS +The first argument supplied is the name of the ZIP archive to create or +.RI -o +in which case it is ignored and the second argument treated as the +name of the ZIP file. If the ZIP file already exists it will be +overwritten. +.PP +Subsequent arguments specify a list of files to place in the ZIP +archive. If none are specified then an empty archive will be created. +.SH SEE ALSO +.BR miniunzip (1), +.BR zlib (3), +.BR zip (1). +.SH AUTHOR +This program was written by Gilles Vollant. This manual page was +written by Mark Brown . + diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/minizip/minizip.c b/software/scsi2sd-util/zlib-1.2.8/contrib/minizip/minizip.c new file mode 100644 index 0000000..4288962 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/minizip/minizip.c @@ -0,0 +1,520 @@ +/* + minizip.c + Version 1.1, February 14h, 2010 + sample part of the MiniZip project - ( http://www.winimage.com/zLibDll/minizip.html ) + + Copyright (C) 1998-2010 Gilles Vollant (minizip) ( http://www.winimage.com/zLibDll/minizip.html ) + + Modifications of Unzip for Zip64 + Copyright (C) 2007-2008 Even Rouault + + Modifications for Zip64 support on both zip and unzip + Copyright (C) 2009-2010 Mathias Svensson ( http://result42.com ) +*/ + + +#if (!defined(_WIN32)) && (!defined(WIN32)) && (!defined(__APPLE__)) + #ifndef __USE_FILE_OFFSET64 + #define __USE_FILE_OFFSET64 + #endif + #ifndef __USE_LARGEFILE64 + #define __USE_LARGEFILE64 + #endif + #ifndef _LARGEFILE64_SOURCE + #define _LARGEFILE64_SOURCE + #endif + #ifndef _FILE_OFFSET_BIT + #define _FILE_OFFSET_BIT 64 + #endif +#endif + +#ifdef __APPLE__ +// In darwin and perhaps other BSD variants off_t is a 64 bit value, hence no need for specific 64 bit functions +#define FOPEN_FUNC(filename, mode) fopen(filename, mode) +#define FTELLO_FUNC(stream) ftello(stream) +#define FSEEKO_FUNC(stream, offset, origin) fseeko(stream, offset, origin) +#else +#define FOPEN_FUNC(filename, mode) fopen64(filename, mode) +#define FTELLO_FUNC(stream) ftello64(stream) +#define FSEEKO_FUNC(stream, offset, origin) fseeko64(stream, offset, origin) +#endif + + + +#include +#include +#include +#include +#include +#include + +#ifdef _WIN32 +# include +# include +#else +# include +# include +# include +# include +#endif + +#include "zip.h" + +#ifdef _WIN32 + #define USEWIN32IOAPI + #include "iowin32.h" +#endif + + + +#define WRITEBUFFERSIZE (16384) +#define MAXFILENAME (256) + +#ifdef _WIN32 +uLong filetime(f, tmzip, dt) + char *f; /* name of file to get info on */ + tm_zip *tmzip; /* return value: access, modific. and creation times */ + uLong *dt; /* dostime */ +{ + int ret = 0; + { + FILETIME ftLocal; + HANDLE hFind; + WIN32_FIND_DATAA ff32; + + hFind = FindFirstFileA(f,&ff32); + if (hFind != INVALID_HANDLE_VALUE) + { + FileTimeToLocalFileTime(&(ff32.ftLastWriteTime),&ftLocal); + FileTimeToDosDateTime(&ftLocal,((LPWORD)dt)+1,((LPWORD)dt)+0); + FindClose(hFind); + ret = 1; + } + } + return ret; +} +#else +#ifdef unix || __APPLE__ +uLong filetime(f, tmzip, dt) + char *f; /* name of file to get info on */ + tm_zip *tmzip; /* return value: access, modific. and creation times */ + uLong *dt; /* dostime */ +{ + int ret=0; + struct stat s; /* results of stat() */ + struct tm* filedate; + time_t tm_t=0; + + if (strcmp(f,"-")!=0) + { + char name[MAXFILENAME+1]; + int len = strlen(f); + if (len > MAXFILENAME) + len = MAXFILENAME; + + strncpy(name, f,MAXFILENAME-1); + /* strncpy doesnt append the trailing NULL, of the string is too long. */ + name[ MAXFILENAME ] = '\0'; + + if (name[len - 1] == '/') + name[len - 1] = '\0'; + /* not all systems allow stat'ing a file with / appended */ + if (stat(name,&s)==0) + { + tm_t = s.st_mtime; + ret = 1; + } + } + filedate = localtime(&tm_t); + + tmzip->tm_sec = filedate->tm_sec; + tmzip->tm_min = filedate->tm_min; + tmzip->tm_hour = filedate->tm_hour; + tmzip->tm_mday = filedate->tm_mday; + tmzip->tm_mon = filedate->tm_mon ; + tmzip->tm_year = filedate->tm_year; + + return ret; +} +#else +uLong filetime(f, tmzip, dt) + char *f; /* name of file to get info on */ + tm_zip *tmzip; /* return value: access, modific. and creation times */ + uLong *dt; /* dostime */ +{ + return 0; +} +#endif +#endif + + + + +int check_exist_file(filename) + const char* filename; +{ + FILE* ftestexist; + int ret = 1; + ftestexist = FOPEN_FUNC(filename,"rb"); + if (ftestexist==NULL) + ret = 0; + else + fclose(ftestexist); + return ret; +} + +void do_banner() +{ + printf("MiniZip 1.1, demo of zLib + MiniZip64 package, written by Gilles Vollant\n"); + printf("more info on MiniZip at http://www.winimage.com/zLibDll/minizip.html\n\n"); +} + +void do_help() +{ + printf("Usage : minizip [-o] [-a] [-0 to -9] [-p password] [-j] file.zip [files_to_add]\n\n" \ + " -o Overwrite existing file.zip\n" \ + " -a Append to existing file.zip\n" \ + " -0 Store only\n" \ + " -1 Compress faster\n" \ + " -9 Compress better\n\n" \ + " -j exclude path. store only the file name.\n\n"); +} + +/* calculate the CRC32 of a file, + because to encrypt a file, we need known the CRC32 of the file before */ +int getFileCrc(const char* filenameinzip,void*buf,unsigned long size_buf,unsigned long* result_crc) +{ + unsigned long calculate_crc=0; + int err=ZIP_OK; + FILE * fin = FOPEN_FUNC(filenameinzip,"rb"); + + unsigned long size_read = 0; + unsigned long total_read = 0; + if (fin==NULL) + { + err = ZIP_ERRNO; + } + + if (err == ZIP_OK) + do + { + err = ZIP_OK; + size_read = (int)fread(buf,1,size_buf,fin); + if (size_read < size_buf) + if (feof(fin)==0) + { + printf("error in reading %s\n",filenameinzip); + err = ZIP_ERRNO; + } + + if (size_read>0) + calculate_crc = crc32(calculate_crc,buf,size_read); + total_read += size_read; + + } while ((err == ZIP_OK) && (size_read>0)); + + if (fin) + fclose(fin); + + *result_crc=calculate_crc; + printf("file %s crc %lx\n", filenameinzip, calculate_crc); + return err; +} + +int isLargeFile(const char* filename) +{ + int largeFile = 0; + ZPOS64_T pos = 0; + FILE* pFile = FOPEN_FUNC(filename, "rb"); + + if(pFile != NULL) + { + int n = FSEEKO_FUNC(pFile, 0, SEEK_END); + pos = FTELLO_FUNC(pFile); + + printf("File : %s is %lld bytes\n", filename, pos); + + if(pos >= 0xffffffff) + largeFile = 1; + + fclose(pFile); + } + + return largeFile; +} + +int main(argc,argv) + int argc; + char *argv[]; +{ + int i; + int opt_overwrite=0; + int opt_compress_level=Z_DEFAULT_COMPRESSION; + int opt_exclude_path=0; + int zipfilenamearg = 0; + char filename_try[MAXFILENAME+16]; + int zipok; + int err=0; + int size_buf=0; + void* buf=NULL; + const char* password=NULL; + + + do_banner(); + if (argc==1) + { + do_help(); + return 0; + } + else + { + for (i=1;i='0') && (c<='9')) + opt_compress_level = c-'0'; + if ((c=='j') || (c=='J')) + opt_exclude_path = 1; + + if (((c=='p') || (c=='P')) && (i+1='a') && (rep<='z')) + rep -= 0x20; + } + while ((rep!='Y') && (rep!='N') && (rep!='A')); + if (rep=='N') + zipok = 0; + if (rep=='A') + opt_overwrite = 2; + } + } + + if (zipok==1) + { + zipFile zf; + int errclose; +# ifdef USEWIN32IOAPI + zlib_filefunc64_def ffunc; + fill_win32_filefunc64A(&ffunc); + zf = zipOpen2_64(filename_try,(opt_overwrite==2) ? 2 : 0,NULL,&ffunc); +# else + zf = zipOpen64(filename_try,(opt_overwrite==2) ? 2 : 0); +# endif + + if (zf == NULL) + { + printf("error opening %s\n",filename_try); + err= ZIP_ERRNO; + } + else + printf("creating %s\n",filename_try); + + for (i=zipfilenamearg+1;(i='0') || (argv[i][1]<='9'))) && + (strlen(argv[i]) == 2))) + { + FILE * fin; + int size_read; + const char* filenameinzip = argv[i]; + const char *savefilenameinzip; + zip_fileinfo zi; + unsigned long crcFile=0; + int zip64 = 0; + + zi.tmz_date.tm_sec = zi.tmz_date.tm_min = zi.tmz_date.tm_hour = + zi.tmz_date.tm_mday = zi.tmz_date.tm_mon = zi.tmz_date.tm_year = 0; + zi.dosDate = 0; + zi.internal_fa = 0; + zi.external_fa = 0; + filetime(filenameinzip,&zi.tmz_date,&zi.dosDate); + +/* + err = zipOpenNewFileInZip(zf,filenameinzip,&zi, + NULL,0,NULL,0,NULL / * comment * /, + (opt_compress_level != 0) ? Z_DEFLATED : 0, + opt_compress_level); +*/ + if ((password != NULL) && (err==ZIP_OK)) + err = getFileCrc(filenameinzip,buf,size_buf,&crcFile); + + zip64 = isLargeFile(filenameinzip); + + /* The path name saved, should not include a leading slash. */ + /*if it did, windows/xp and dynazip couldn't read the zip file. */ + savefilenameinzip = filenameinzip; + while( savefilenameinzip[0] == '\\' || savefilenameinzip[0] == '/' ) + { + savefilenameinzip++; + } + + /*should the zip file contain any path at all?*/ + if( opt_exclude_path ) + { + const char *tmpptr; + const char *lastslash = 0; + for( tmpptr = savefilenameinzip; *tmpptr; tmpptr++) + { + if( *tmpptr == '\\' || *tmpptr == '/') + { + lastslash = tmpptr; + } + } + if( lastslash != NULL ) + { + savefilenameinzip = lastslash+1; // base filename follows last slash. + } + } + + /**/ + err = zipOpenNewFileInZip3_64(zf,savefilenameinzip,&zi, + NULL,0,NULL,0,NULL /* comment*/, + (opt_compress_level != 0) ? Z_DEFLATED : 0, + opt_compress_level,0, + /* -MAX_WBITS, DEF_MEM_LEVEL, Z_DEFAULT_STRATEGY, */ + -MAX_WBITS, DEF_MEM_LEVEL, Z_DEFAULT_STRATEGY, + password,crcFile, zip64); + + if (err != ZIP_OK) + printf("error in opening %s in zipfile\n",filenameinzip); + else + { + fin = FOPEN_FUNC(filenameinzip,"rb"); + if (fin==NULL) + { + err=ZIP_ERRNO; + printf("error in opening %s for reading\n",filenameinzip); + } + } + + if (err == ZIP_OK) + do + { + err = ZIP_OK; + size_read = (int)fread(buf,1,size_buf,fin); + if (size_read < size_buf) + if (feof(fin)==0) + { + printf("error in reading %s\n",filenameinzip); + err = ZIP_ERRNO; + } + + if (size_read>0) + { + err = zipWriteInFileInZip (zf,buf,size_read); + if (err<0) + { + printf("error in writing %s in the zipfile\n", + filenameinzip); + } + + } + } while ((err == ZIP_OK) && (size_read>0)); + + if (fin) + fclose(fin); + + if (err<0) + err=ZIP_ERRNO; + else + { + err = zipCloseFileInZip(zf); + if (err!=ZIP_OK) + printf("error in closing %s in the zipfile\n", + filenameinzip); + } + } + } + errclose = zipClose(zf,NULL); + if (errclose != ZIP_OK) + printf("error in closing %s\n",filename_try); + } + else + { + do_help(); + } + + free(buf); + return 0; +} diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/minizip/minizip.pc.in b/software/scsi2sd-util/zlib-1.2.8/contrib/minizip/minizip.pc.in new file mode 100644 index 0000000..69b5b7f --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/minizip/minizip.pc.in @@ -0,0 +1,12 @@ +prefix=@prefix@ +exec_prefix=@exec_prefix@ +libdir=@libdir@ +includedir=@includedir@/minizip + +Name: minizip +Description: Minizip zip file manipulation library +Requires: +Version: @PACKAGE_VERSION@ +Libs: -L${libdir} -lminizip +Libs.private: -lz +Cflags: -I${includedir} diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/minizip/mztools.c b/software/scsi2sd-util/zlib-1.2.8/contrib/minizip/mztools.c new file mode 100644 index 0000000..96891c2 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/minizip/mztools.c @@ -0,0 +1,291 @@ +/* + Additional tools for Minizip + Code: Xavier Roche '2004 + License: Same as ZLIB (www.gzip.org) +*/ + +/* Code */ +#include +#include +#include +#include "zlib.h" +#include "unzip.h" + +#define READ_8(adr) ((unsigned char)*(adr)) +#define READ_16(adr) ( READ_8(adr) | (READ_8(adr+1) << 8) ) +#define READ_32(adr) ( READ_16(adr) | (READ_16((adr)+2) << 16) ) + +#define WRITE_8(buff, n) do { \ + *((unsigned char*)(buff)) = (unsigned char) ((n) & 0xff); \ +} while(0) +#define WRITE_16(buff, n) do { \ + WRITE_8((unsigned char*)(buff), n); \ + WRITE_8(((unsigned char*)(buff)) + 1, (n) >> 8); \ +} while(0) +#define WRITE_32(buff, n) do { \ + WRITE_16((unsigned char*)(buff), (n) & 0xffff); \ + WRITE_16((unsigned char*)(buff) + 2, (n) >> 16); \ +} while(0) + +extern int ZEXPORT unzRepair(file, fileOut, fileOutTmp, nRecovered, bytesRecovered) +const char* file; +const char* fileOut; +const char* fileOutTmp; +uLong* nRecovered; +uLong* bytesRecovered; +{ + int err = Z_OK; + FILE* fpZip = fopen(file, "rb"); + FILE* fpOut = fopen(fileOut, "wb"); + FILE* fpOutCD = fopen(fileOutTmp, "wb"); + if (fpZip != NULL && fpOut != NULL) { + int entries = 0; + uLong totalBytes = 0; + char header[30]; + char filename[1024]; + char extra[1024]; + int offset = 0; + int offsetCD = 0; + while ( fread(header, 1, 30, fpZip) == 30 ) { + int currentOffset = offset; + + /* File entry */ + if (READ_32(header) == 0x04034b50) { + unsigned int version = READ_16(header + 4); + unsigned int gpflag = READ_16(header + 6); + unsigned int method = READ_16(header + 8); + unsigned int filetime = READ_16(header + 10); + unsigned int filedate = READ_16(header + 12); + unsigned int crc = READ_32(header + 14); /* crc */ + unsigned int cpsize = READ_32(header + 18); /* compressed size */ + unsigned int uncpsize = READ_32(header + 22); /* uncompressed sz */ + unsigned int fnsize = READ_16(header + 26); /* file name length */ + unsigned int extsize = READ_16(header + 28); /* extra field length */ + filename[0] = extra[0] = '\0'; + + /* Header */ + if (fwrite(header, 1, 30, fpOut) == 30) { + offset += 30; + } else { + err = Z_ERRNO; + break; + } + + /* Filename */ + if (fnsize > 0) { + if (fnsize < sizeof(filename)) { + if (fread(filename, 1, fnsize, fpZip) == fnsize) { + if (fwrite(filename, 1, fnsize, fpOut) == fnsize) { + offset += fnsize; + } else { + err = Z_ERRNO; + break; + } + } else { + err = Z_ERRNO; + break; + } + } else { + err = Z_ERRNO; + break; + } + } else { + err = Z_STREAM_ERROR; + break; + } + + /* Extra field */ + if (extsize > 0) { + if (extsize < sizeof(extra)) { + if (fread(extra, 1, extsize, fpZip) == extsize) { + if (fwrite(extra, 1, extsize, fpOut) == extsize) { + offset += extsize; + } else { + err = Z_ERRNO; + break; + } + } else { + err = Z_ERRNO; + break; + } + } else { + err = Z_ERRNO; + break; + } + } + + /* Data */ + { + int dataSize = cpsize; + if (dataSize == 0) { + dataSize = uncpsize; + } + if (dataSize > 0) { + char* data = malloc(dataSize); + if (data != NULL) { + if ((int)fread(data, 1, dataSize, fpZip) == dataSize) { + if ((int)fwrite(data, 1, dataSize, fpOut) == dataSize) { + offset += dataSize; + totalBytes += dataSize; + } else { + err = Z_ERRNO; + } + } else { + err = Z_ERRNO; + } + free(data); + if (err != Z_OK) { + break; + } + } else { + err = Z_MEM_ERROR; + break; + } + } + } + + /* Central directory entry */ + { + char header[46]; + char* comment = ""; + int comsize = (int) strlen(comment); + WRITE_32(header, 0x02014b50); + WRITE_16(header + 4, version); + WRITE_16(header + 6, version); + WRITE_16(header + 8, gpflag); + WRITE_16(header + 10, method); + WRITE_16(header + 12, filetime); + WRITE_16(header + 14, filedate); + WRITE_32(header + 16, crc); + WRITE_32(header + 20, cpsize); + WRITE_32(header + 24, uncpsize); + WRITE_16(header + 28, fnsize); + WRITE_16(header + 30, extsize); + WRITE_16(header + 32, comsize); + WRITE_16(header + 34, 0); /* disk # */ + WRITE_16(header + 36, 0); /* int attrb */ + WRITE_32(header + 38, 0); /* ext attrb */ + WRITE_32(header + 42, currentOffset); + /* Header */ + if (fwrite(header, 1, 46, fpOutCD) == 46) { + offsetCD += 46; + + /* Filename */ + if (fnsize > 0) { + if (fwrite(filename, 1, fnsize, fpOutCD) == fnsize) { + offsetCD += fnsize; + } else { + err = Z_ERRNO; + break; + } + } else { + err = Z_STREAM_ERROR; + break; + } + + /* Extra field */ + if (extsize > 0) { + if (fwrite(extra, 1, extsize, fpOutCD) == extsize) { + offsetCD += extsize; + } else { + err = Z_ERRNO; + break; + } + } + + /* Comment field */ + if (comsize > 0) { + if ((int)fwrite(comment, 1, comsize, fpOutCD) == comsize) { + offsetCD += comsize; + } else { + err = Z_ERRNO; + break; + } + } + + + } else { + err = Z_ERRNO; + break; + } + } + + /* Success */ + entries++; + + } else { + break; + } + } + + /* Final central directory */ + { + int entriesZip = entries; + char header[22]; + char* comment = ""; // "ZIP File recovered by zlib/minizip/mztools"; + int comsize = (int) strlen(comment); + if (entriesZip > 0xffff) { + entriesZip = 0xffff; + } + WRITE_32(header, 0x06054b50); + WRITE_16(header + 4, 0); /* disk # */ + WRITE_16(header + 6, 0); /* disk # */ + WRITE_16(header + 8, entriesZip); /* hack */ + WRITE_16(header + 10, entriesZip); /* hack */ + WRITE_32(header + 12, offsetCD); /* size of CD */ + WRITE_32(header + 16, offset); /* offset to CD */ + WRITE_16(header + 20, comsize); /* comment */ + + /* Header */ + if (fwrite(header, 1, 22, fpOutCD) == 22) { + + /* Comment field */ + if (comsize > 0) { + if ((int)fwrite(comment, 1, comsize, fpOutCD) != comsize) { + err = Z_ERRNO; + } + } + + } else { + err = Z_ERRNO; + } + } + + /* Final merge (file + central directory) */ + fclose(fpOutCD); + if (err == Z_OK) { + fpOutCD = fopen(fileOutTmp, "rb"); + if (fpOutCD != NULL) { + int nRead; + char buffer[8192]; + while ( (nRead = (int)fread(buffer, 1, sizeof(buffer), fpOutCD)) > 0) { + if ((int)fwrite(buffer, 1, nRead, fpOut) != nRead) { + err = Z_ERRNO; + break; + } + } + fclose(fpOutCD); + } + } + + /* Close */ + fclose(fpZip); + fclose(fpOut); + + /* Wipe temporary file */ + (void)remove(fileOutTmp); + + /* Number of recovered entries */ + if (err == Z_OK) { + if (nRecovered != NULL) { + *nRecovered = entries; + } + if (bytesRecovered != NULL) { + *bytesRecovered = totalBytes; + } + } + } else { + err = Z_STREAM_ERROR; + } + return err; +} diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/minizip/mztools.h b/software/scsi2sd-util/zlib-1.2.8/contrib/minizip/mztools.h new file mode 100644 index 0000000..a49a426 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/minizip/mztools.h @@ -0,0 +1,37 @@ +/* + Additional tools for Minizip + Code: Xavier Roche '2004 + License: Same as ZLIB (www.gzip.org) +*/ + +#ifndef _zip_tools_H +#define _zip_tools_H + +#ifdef __cplusplus +extern "C" { +#endif + +#ifndef _ZLIB_H +#include "zlib.h" +#endif + +#include "unzip.h" + +/* Repair a ZIP file (missing central directory) + file: file to recover + fileOut: output file after recovery + fileOutTmp: temporary file name used for recovery +*/ +extern int ZEXPORT unzRepair(const char* file, + const char* fileOut, + const char* fileOutTmp, + uLong* nRecovered, + uLong* bytesRecovered); + + +#ifdef __cplusplus +} +#endif + + +#endif diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/minizip/unzip.c b/software/scsi2sd-util/zlib-1.2.8/contrib/minizip/unzip.c new file mode 100644 index 0000000..9093504 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/minizip/unzip.c @@ -0,0 +1,2125 @@ +/* unzip.c -- IO for uncompress .zip files using zlib + Version 1.1, February 14h, 2010 + part of the MiniZip project - ( http://www.winimage.com/zLibDll/minizip.html ) + + Copyright (C) 1998-2010 Gilles Vollant (minizip) ( http://www.winimage.com/zLibDll/minizip.html ) + + Modifications of Unzip for Zip64 + Copyright (C) 2007-2008 Even Rouault + + Modifications for Zip64 support on both zip and unzip + Copyright (C) 2009-2010 Mathias Svensson ( http://result42.com ) + + For more info read MiniZip_info.txt + + + ------------------------------------------------------------------------------------ + Decryption code comes from crypt.c by Info-ZIP but has been greatly reduced in terms of + compatibility with older software. The following is from the original crypt.c. + Code woven in by Terry Thorsen 1/2003. + + Copyright (c) 1990-2000 Info-ZIP. All rights reserved. + + See the accompanying file LICENSE, version 2000-Apr-09 or later + (the contents of which are also included in zip.h) for terms of use. + If, for some reason, all these files are missing, the Info-ZIP license + also may be found at: ftp://ftp.info-zip.org/pub/infozip/license.html + + crypt.c (full version) by Info-ZIP. Last revised: [see crypt.h] + + The encryption/decryption parts of this source code (as opposed to the + non-echoing password parts) were originally written in Europe. The + whole source package can be freely distributed, including from the USA. + (Prior to January 2000, re-export from the US was a violation of US law.) + + This encryption code is a direct transcription of the algorithm from + Roger Schlafly, described by Phil Katz in the file appnote.txt. This + file (appnote.txt) is distributed with the PKZIP program (even in the + version without encryption capabilities). + + ------------------------------------------------------------------------------------ + + Changes in unzip.c + + 2007-2008 - Even Rouault - Addition of cpl_unzGetCurrentFileZStreamPos + 2007-2008 - Even Rouault - Decoration of symbol names unz* -> cpl_unz* + 2007-2008 - Even Rouault - Remove old C style function prototypes + 2007-2008 - Even Rouault - Add unzip support for ZIP64 + + Copyright (C) 2007-2008 Even Rouault + + + Oct-2009 - Mathias Svensson - Removed cpl_* from symbol names (Even Rouault added them but since this is now moved to a new project (minizip64) I renamed them again). + Oct-2009 - Mathias Svensson - Fixed problem if uncompressed size was > 4G and compressed size was <4G + should only read the compressed/uncompressed size from the Zip64 format if + the size from normal header was 0xFFFFFFFF + Oct-2009 - Mathias Svensson - Applied some bug fixes from paches recived from Gilles Vollant + Oct-2009 - Mathias Svensson - Applied support to unzip files with compression mathod BZIP2 (bzip2 lib is required) + Patch created by Daniel Borca + + Jan-2010 - back to unzip and minizip 1.0 name scheme, with compatibility layer + + Copyright (C) 1998 - 2010 Gilles Vollant, Even Rouault, Mathias Svensson + +*/ + + +#include +#include +#include + +#ifndef NOUNCRYPT + #define NOUNCRYPT +#endif + +#include "zlib.h" +#include "unzip.h" + +#ifdef STDC +# include +# include +# include +#endif +#ifdef NO_ERRNO_H + extern int errno; +#else +# include +#endif + + +#ifndef local +# define local static +#endif +/* compile with -Dlocal if your debugger can't find static symbols */ + + +#ifndef CASESENSITIVITYDEFAULT_NO +# if !defined(unix) && !defined(CASESENSITIVITYDEFAULT_YES) +# define CASESENSITIVITYDEFAULT_NO +# endif +#endif + + +#ifndef UNZ_BUFSIZE +#define UNZ_BUFSIZE (16384) +#endif + +#ifndef UNZ_MAXFILENAMEINZIP +#define UNZ_MAXFILENAMEINZIP (256) +#endif + +#ifndef ALLOC +# define ALLOC(size) (malloc(size)) +#endif +#ifndef TRYFREE +# define TRYFREE(p) {if (p) free(p);} +#endif + +#define SIZECENTRALDIRITEM (0x2e) +#define SIZEZIPLOCALHEADER (0x1e) + + +const char unz_copyright[] = + " unzip 1.01 Copyright 1998-2004 Gilles Vollant - http://www.winimage.com/zLibDll"; + +/* unz_file_info_interntal contain internal info about a file in zipfile*/ +typedef struct unz_file_info64_internal_s +{ + ZPOS64_T offset_curfile;/* relative offset of local header 8 bytes */ +} unz_file_info64_internal; + + +/* file_in_zip_read_info_s contain internal information about a file in zipfile, + when reading and decompress it */ +typedef struct +{ + char *read_buffer; /* internal buffer for compressed data */ + z_stream stream; /* zLib stream structure for inflate */ + +#ifdef HAVE_BZIP2 + bz_stream bstream; /* bzLib stream structure for bziped */ +#endif + + ZPOS64_T pos_in_zipfile; /* position in byte on the zipfile, for fseek*/ + uLong stream_initialised; /* flag set if stream structure is initialised*/ + + ZPOS64_T offset_local_extrafield;/* offset of the local extra field */ + uInt size_local_extrafield;/* size of the local extra field */ + ZPOS64_T pos_local_extrafield; /* position in the local extra field in read*/ + ZPOS64_T total_out_64; + + uLong crc32; /* crc32 of all data uncompressed */ + uLong crc32_wait; /* crc32 we must obtain after decompress all */ + ZPOS64_T rest_read_compressed; /* number of byte to be decompressed */ + ZPOS64_T rest_read_uncompressed;/*number of byte to be obtained after decomp*/ + zlib_filefunc64_32_def z_filefunc; + voidpf filestream; /* io structore of the zipfile */ + uLong compression_method; /* compression method (0==store) */ + ZPOS64_T byte_before_the_zipfile;/* byte before the zipfile, (>0 for sfx)*/ + int raw; +} file_in_zip64_read_info_s; + + +/* unz64_s contain internal information about the zipfile +*/ +typedef struct +{ + zlib_filefunc64_32_def z_filefunc; + int is64bitOpenFunction; + voidpf filestream; /* io structore of the zipfile */ + unz_global_info64 gi; /* public global information */ + ZPOS64_T byte_before_the_zipfile;/* byte before the zipfile, (>0 for sfx)*/ + ZPOS64_T num_file; /* number of the current file in the zipfile*/ + ZPOS64_T pos_in_central_dir; /* pos of the current file in the central dir*/ + ZPOS64_T current_file_ok; /* flag about the usability of the current file*/ + ZPOS64_T central_pos; /* position of the beginning of the central dir*/ + + ZPOS64_T size_central_dir; /* size of the central directory */ + ZPOS64_T offset_central_dir; /* offset of start of central directory with + respect to the starting disk number */ + + unz_file_info64 cur_file_info; /* public info about the current file in zip*/ + unz_file_info64_internal cur_file_info_internal; /* private info about it*/ + file_in_zip64_read_info_s* pfile_in_zip_read; /* structure about the current + file if we are decompressing it */ + int encrypted; + + int isZip64; + +# ifndef NOUNCRYPT + unsigned long keys[3]; /* keys defining the pseudo-random sequence */ + const z_crc_t* pcrc_32_tab; +# endif +} unz64_s; + + +#ifndef NOUNCRYPT +#include "crypt.h" +#endif + +/* =========================================================================== + Read a byte from a gz_stream; update next_in and avail_in. Return EOF + for end of file. + IN assertion: the stream s has been sucessfully opened for reading. +*/ + + +local int unz64local_getByte OF(( + const zlib_filefunc64_32_def* pzlib_filefunc_def, + voidpf filestream, + int *pi)); + +local int unz64local_getByte(const zlib_filefunc64_32_def* pzlib_filefunc_def, voidpf filestream, int *pi) +{ + unsigned char c; + int err = (int)ZREAD64(*pzlib_filefunc_def,filestream,&c,1); + if (err==1) + { + *pi = (int)c; + return UNZ_OK; + } + else + { + if (ZERROR64(*pzlib_filefunc_def,filestream)) + return UNZ_ERRNO; + else + return UNZ_EOF; + } +} + + +/* =========================================================================== + Reads a long in LSB order from the given gz_stream. Sets +*/ +local int unz64local_getShort OF(( + const zlib_filefunc64_32_def* pzlib_filefunc_def, + voidpf filestream, + uLong *pX)); + +local int unz64local_getShort (const zlib_filefunc64_32_def* pzlib_filefunc_def, + voidpf filestream, + uLong *pX) +{ + uLong x ; + int i = 0; + int err; + + err = unz64local_getByte(pzlib_filefunc_def,filestream,&i); + x = (uLong)i; + + if (err==UNZ_OK) + err = unz64local_getByte(pzlib_filefunc_def,filestream,&i); + x |= ((uLong)i)<<8; + + if (err==UNZ_OK) + *pX = x; + else + *pX = 0; + return err; +} + +local int unz64local_getLong OF(( + const zlib_filefunc64_32_def* pzlib_filefunc_def, + voidpf filestream, + uLong *pX)); + +local int unz64local_getLong (const zlib_filefunc64_32_def* pzlib_filefunc_def, + voidpf filestream, + uLong *pX) +{ + uLong x ; + int i = 0; + int err; + + err = unz64local_getByte(pzlib_filefunc_def,filestream,&i); + x = (uLong)i; + + if (err==UNZ_OK) + err = unz64local_getByte(pzlib_filefunc_def,filestream,&i); + x |= ((uLong)i)<<8; + + if (err==UNZ_OK) + err = unz64local_getByte(pzlib_filefunc_def,filestream,&i); + x |= ((uLong)i)<<16; + + if (err==UNZ_OK) + err = unz64local_getByte(pzlib_filefunc_def,filestream,&i); + x += ((uLong)i)<<24; + + if (err==UNZ_OK) + *pX = x; + else + *pX = 0; + return err; +} + +local int unz64local_getLong64 OF(( + const zlib_filefunc64_32_def* pzlib_filefunc_def, + voidpf filestream, + ZPOS64_T *pX)); + + +local int unz64local_getLong64 (const zlib_filefunc64_32_def* pzlib_filefunc_def, + voidpf filestream, + ZPOS64_T *pX) +{ + ZPOS64_T x ; + int i = 0; + int err; + + err = unz64local_getByte(pzlib_filefunc_def,filestream,&i); + x = (ZPOS64_T)i; + + if (err==UNZ_OK) + err = unz64local_getByte(pzlib_filefunc_def,filestream,&i); + x |= ((ZPOS64_T)i)<<8; + + if (err==UNZ_OK) + err = unz64local_getByte(pzlib_filefunc_def,filestream,&i); + x |= ((ZPOS64_T)i)<<16; + + if (err==UNZ_OK) + err = unz64local_getByte(pzlib_filefunc_def,filestream,&i); + x |= ((ZPOS64_T)i)<<24; + + if (err==UNZ_OK) + err = unz64local_getByte(pzlib_filefunc_def,filestream,&i); + x |= ((ZPOS64_T)i)<<32; + + if (err==UNZ_OK) + err = unz64local_getByte(pzlib_filefunc_def,filestream,&i); + x |= ((ZPOS64_T)i)<<40; + + if (err==UNZ_OK) + err = unz64local_getByte(pzlib_filefunc_def,filestream,&i); + x |= ((ZPOS64_T)i)<<48; + + if (err==UNZ_OK) + err = unz64local_getByte(pzlib_filefunc_def,filestream,&i); + x |= ((ZPOS64_T)i)<<56; + + if (err==UNZ_OK) + *pX = x; + else + *pX = 0; + return err; +} + +/* My own strcmpi / strcasecmp */ +local int strcmpcasenosensitive_internal (const char* fileName1, const char* fileName2) +{ + for (;;) + { + char c1=*(fileName1++); + char c2=*(fileName2++); + if ((c1>='a') && (c1<='z')) + c1 -= 0x20; + if ((c2>='a') && (c2<='z')) + c2 -= 0x20; + if (c1=='\0') + return ((c2=='\0') ? 0 : -1); + if (c2=='\0') + return 1; + if (c1c2) + return 1; + } +} + + +#ifdef CASESENSITIVITYDEFAULT_NO +#define CASESENSITIVITYDEFAULTVALUE 2 +#else +#define CASESENSITIVITYDEFAULTVALUE 1 +#endif + +#ifndef STRCMPCASENOSENTIVEFUNCTION +#define STRCMPCASENOSENTIVEFUNCTION strcmpcasenosensitive_internal +#endif + +/* + Compare two filename (fileName1,fileName2). + If iCaseSenisivity = 1, comparision is case sensitivity (like strcmp) + If iCaseSenisivity = 2, comparision is not case sensitivity (like strcmpi + or strcasecmp) + If iCaseSenisivity = 0, case sensitivity is defaut of your operating system + (like 1 on Unix, 2 on Windows) + +*/ +extern int ZEXPORT unzStringFileNameCompare (const char* fileName1, + const char* fileName2, + int iCaseSensitivity) + +{ + if (iCaseSensitivity==0) + iCaseSensitivity=CASESENSITIVITYDEFAULTVALUE; + + if (iCaseSensitivity==1) + return strcmp(fileName1,fileName2); + + return STRCMPCASENOSENTIVEFUNCTION(fileName1,fileName2); +} + +#ifndef BUFREADCOMMENT +#define BUFREADCOMMENT (0x400) +#endif + +/* + Locate the Central directory of a zipfile (at the end, just before + the global comment) +*/ +local ZPOS64_T unz64local_SearchCentralDir OF((const zlib_filefunc64_32_def* pzlib_filefunc_def, voidpf filestream)); +local ZPOS64_T unz64local_SearchCentralDir(const zlib_filefunc64_32_def* pzlib_filefunc_def, voidpf filestream) +{ + unsigned char* buf; + ZPOS64_T uSizeFile; + ZPOS64_T uBackRead; + ZPOS64_T uMaxBack=0xffff; /* maximum size of global comment */ + ZPOS64_T uPosFound=0; + + if (ZSEEK64(*pzlib_filefunc_def,filestream,0,ZLIB_FILEFUNC_SEEK_END) != 0) + return 0; + + + uSizeFile = ZTELL64(*pzlib_filefunc_def,filestream); + + if (uMaxBack>uSizeFile) + uMaxBack = uSizeFile; + + buf = (unsigned char*)ALLOC(BUFREADCOMMENT+4); + if (buf==NULL) + return 0; + + uBackRead = 4; + while (uBackReaduMaxBack) + uBackRead = uMaxBack; + else + uBackRead+=BUFREADCOMMENT; + uReadPos = uSizeFile-uBackRead ; + + uReadSize = ((BUFREADCOMMENT+4) < (uSizeFile-uReadPos)) ? + (BUFREADCOMMENT+4) : (uLong)(uSizeFile-uReadPos); + if (ZSEEK64(*pzlib_filefunc_def,filestream,uReadPos,ZLIB_FILEFUNC_SEEK_SET)!=0) + break; + + if (ZREAD64(*pzlib_filefunc_def,filestream,buf,uReadSize)!=uReadSize) + break; + + for (i=(int)uReadSize-3; (i--)>0;) + if (((*(buf+i))==0x50) && ((*(buf+i+1))==0x4b) && + ((*(buf+i+2))==0x05) && ((*(buf+i+3))==0x06)) + { + uPosFound = uReadPos+i; + break; + } + + if (uPosFound!=0) + break; + } + TRYFREE(buf); + return uPosFound; +} + + +/* + Locate the Central directory 64 of a zipfile (at the end, just before + the global comment) +*/ +local ZPOS64_T unz64local_SearchCentralDir64 OF(( + const zlib_filefunc64_32_def* pzlib_filefunc_def, + voidpf filestream)); + +local ZPOS64_T unz64local_SearchCentralDir64(const zlib_filefunc64_32_def* pzlib_filefunc_def, + voidpf filestream) +{ + unsigned char* buf; + ZPOS64_T uSizeFile; + ZPOS64_T uBackRead; + ZPOS64_T uMaxBack=0xffff; /* maximum size of global comment */ + ZPOS64_T uPosFound=0; + uLong uL; + ZPOS64_T relativeOffset; + + if (ZSEEK64(*pzlib_filefunc_def,filestream,0,ZLIB_FILEFUNC_SEEK_END) != 0) + return 0; + + + uSizeFile = ZTELL64(*pzlib_filefunc_def,filestream); + + if (uMaxBack>uSizeFile) + uMaxBack = uSizeFile; + + buf = (unsigned char*)ALLOC(BUFREADCOMMENT+4); + if (buf==NULL) + return 0; + + uBackRead = 4; + while (uBackReaduMaxBack) + uBackRead = uMaxBack; + else + uBackRead+=BUFREADCOMMENT; + uReadPos = uSizeFile-uBackRead ; + + uReadSize = ((BUFREADCOMMENT+4) < (uSizeFile-uReadPos)) ? + (BUFREADCOMMENT+4) : (uLong)(uSizeFile-uReadPos); + if (ZSEEK64(*pzlib_filefunc_def,filestream,uReadPos,ZLIB_FILEFUNC_SEEK_SET)!=0) + break; + + if (ZREAD64(*pzlib_filefunc_def,filestream,buf,uReadSize)!=uReadSize) + break; + + for (i=(int)uReadSize-3; (i--)>0;) + if (((*(buf+i))==0x50) && ((*(buf+i+1))==0x4b) && + ((*(buf+i+2))==0x06) && ((*(buf+i+3))==0x07)) + { + uPosFound = uReadPos+i; + break; + } + + if (uPosFound!=0) + break; + } + TRYFREE(buf); + if (uPosFound == 0) + return 0; + + /* Zip64 end of central directory locator */ + if (ZSEEK64(*pzlib_filefunc_def,filestream, uPosFound,ZLIB_FILEFUNC_SEEK_SET)!=0) + return 0; + + /* the signature, already checked */ + if (unz64local_getLong(pzlib_filefunc_def,filestream,&uL)!=UNZ_OK) + return 0; + + /* number of the disk with the start of the zip64 end of central directory */ + if (unz64local_getLong(pzlib_filefunc_def,filestream,&uL)!=UNZ_OK) + return 0; + if (uL != 0) + return 0; + + /* relative offset of the zip64 end of central directory record */ + if (unz64local_getLong64(pzlib_filefunc_def,filestream,&relativeOffset)!=UNZ_OK) + return 0; + + /* total number of disks */ + if (unz64local_getLong(pzlib_filefunc_def,filestream,&uL)!=UNZ_OK) + return 0; + if (uL != 1) + return 0; + + /* Goto end of central directory record */ + if (ZSEEK64(*pzlib_filefunc_def,filestream, relativeOffset,ZLIB_FILEFUNC_SEEK_SET)!=0) + return 0; + + /* the signature */ + if (unz64local_getLong(pzlib_filefunc_def,filestream,&uL)!=UNZ_OK) + return 0; + + if (uL != 0x06064b50) + return 0; + + return relativeOffset; +} + +/* + Open a Zip file. path contain the full pathname (by example, + on a Windows NT computer "c:\\test\\zlib114.zip" or on an Unix computer + "zlib/zlib114.zip". + If the zipfile cannot be opened (file doesn't exist or in not valid), the + return value is NULL. + Else, the return value is a unzFile Handle, usable with other function + of this unzip package. +*/ +local unzFile unzOpenInternal (const void *path, + zlib_filefunc64_32_def* pzlib_filefunc64_32_def, + int is64bitOpenFunction) +{ + unz64_s us; + unz64_s *s; + ZPOS64_T central_pos; + uLong uL; + + uLong number_disk; /* number of the current dist, used for + spaning ZIP, unsupported, always 0*/ + uLong number_disk_with_CD; /* number the the disk with central dir, used + for spaning ZIP, unsupported, always 0*/ + ZPOS64_T number_entry_CD; /* total number of entries in + the central dir + (same than number_entry on nospan) */ + + int err=UNZ_OK; + + if (unz_copyright[0]!=' ') + return NULL; + + us.z_filefunc.zseek32_file = NULL; + us.z_filefunc.ztell32_file = NULL; + if (pzlib_filefunc64_32_def==NULL) + fill_fopen64_filefunc(&us.z_filefunc.zfile_func64); + else + us.z_filefunc = *pzlib_filefunc64_32_def; + us.is64bitOpenFunction = is64bitOpenFunction; + + + + us.filestream = ZOPEN64(us.z_filefunc, + path, + ZLIB_FILEFUNC_MODE_READ | + ZLIB_FILEFUNC_MODE_EXISTING); + if (us.filestream==NULL) + return NULL; + + central_pos = unz64local_SearchCentralDir64(&us.z_filefunc,us.filestream); + if (central_pos) + { + uLong uS; + ZPOS64_T uL64; + + us.isZip64 = 1; + + if (ZSEEK64(us.z_filefunc, us.filestream, + central_pos,ZLIB_FILEFUNC_SEEK_SET)!=0) + err=UNZ_ERRNO; + + /* the signature, already checked */ + if (unz64local_getLong(&us.z_filefunc, us.filestream,&uL)!=UNZ_OK) + err=UNZ_ERRNO; + + /* size of zip64 end of central directory record */ + if (unz64local_getLong64(&us.z_filefunc, us.filestream,&uL64)!=UNZ_OK) + err=UNZ_ERRNO; + + /* version made by */ + if (unz64local_getShort(&us.z_filefunc, us.filestream,&uS)!=UNZ_OK) + err=UNZ_ERRNO; + + /* version needed to extract */ + if (unz64local_getShort(&us.z_filefunc, us.filestream,&uS)!=UNZ_OK) + err=UNZ_ERRNO; + + /* number of this disk */ + if (unz64local_getLong(&us.z_filefunc, us.filestream,&number_disk)!=UNZ_OK) + err=UNZ_ERRNO; + + /* number of the disk with the start of the central directory */ + if (unz64local_getLong(&us.z_filefunc, us.filestream,&number_disk_with_CD)!=UNZ_OK) + err=UNZ_ERRNO; + + /* total number of entries in the central directory on this disk */ + if (unz64local_getLong64(&us.z_filefunc, us.filestream,&us.gi.number_entry)!=UNZ_OK) + err=UNZ_ERRNO; + + /* total number of entries in the central directory */ + if (unz64local_getLong64(&us.z_filefunc, us.filestream,&number_entry_CD)!=UNZ_OK) + err=UNZ_ERRNO; + + if ((number_entry_CD!=us.gi.number_entry) || + (number_disk_with_CD!=0) || + (number_disk!=0)) + err=UNZ_BADZIPFILE; + + /* size of the central directory */ + if (unz64local_getLong64(&us.z_filefunc, us.filestream,&us.size_central_dir)!=UNZ_OK) + err=UNZ_ERRNO; + + /* offset of start of central directory with respect to the + starting disk number */ + if (unz64local_getLong64(&us.z_filefunc, us.filestream,&us.offset_central_dir)!=UNZ_OK) + err=UNZ_ERRNO; + + us.gi.size_comment = 0; + } + else + { + central_pos = unz64local_SearchCentralDir(&us.z_filefunc,us.filestream); + if (central_pos==0) + err=UNZ_ERRNO; + + us.isZip64 = 0; + + if (ZSEEK64(us.z_filefunc, us.filestream, + central_pos,ZLIB_FILEFUNC_SEEK_SET)!=0) + err=UNZ_ERRNO; + + /* the signature, already checked */ + if (unz64local_getLong(&us.z_filefunc, us.filestream,&uL)!=UNZ_OK) + err=UNZ_ERRNO; + + /* number of this disk */ + if (unz64local_getShort(&us.z_filefunc, us.filestream,&number_disk)!=UNZ_OK) + err=UNZ_ERRNO; + + /* number of the disk with the start of the central directory */ + if (unz64local_getShort(&us.z_filefunc, us.filestream,&number_disk_with_CD)!=UNZ_OK) + err=UNZ_ERRNO; + + /* total number of entries in the central dir on this disk */ + if (unz64local_getShort(&us.z_filefunc, us.filestream,&uL)!=UNZ_OK) + err=UNZ_ERRNO; + us.gi.number_entry = uL; + + /* total number of entries in the central dir */ + if (unz64local_getShort(&us.z_filefunc, us.filestream,&uL)!=UNZ_OK) + err=UNZ_ERRNO; + number_entry_CD = uL; + + if ((number_entry_CD!=us.gi.number_entry) || + (number_disk_with_CD!=0) || + (number_disk!=0)) + err=UNZ_BADZIPFILE; + + /* size of the central directory */ + if (unz64local_getLong(&us.z_filefunc, us.filestream,&uL)!=UNZ_OK) + err=UNZ_ERRNO; + us.size_central_dir = uL; + + /* offset of start of central directory with respect to the + starting disk number */ + if (unz64local_getLong(&us.z_filefunc, us.filestream,&uL)!=UNZ_OK) + err=UNZ_ERRNO; + us.offset_central_dir = uL; + + /* zipfile comment length */ + if (unz64local_getShort(&us.z_filefunc, us.filestream,&us.gi.size_comment)!=UNZ_OK) + err=UNZ_ERRNO; + } + + if ((central_pospfile_in_zip_read!=NULL) + unzCloseCurrentFile(file); + + ZCLOSE64(s->z_filefunc, s->filestream); + TRYFREE(s); + return UNZ_OK; +} + + +/* + Write info about the ZipFile in the *pglobal_info structure. + No preparation of the structure is needed + return UNZ_OK if there is no problem. */ +extern int ZEXPORT unzGetGlobalInfo64 (unzFile file, unz_global_info64* pglobal_info) +{ + unz64_s* s; + if (file==NULL) + return UNZ_PARAMERROR; + s=(unz64_s*)file; + *pglobal_info=s->gi; + return UNZ_OK; +} + +extern int ZEXPORT unzGetGlobalInfo (unzFile file, unz_global_info* pglobal_info32) +{ + unz64_s* s; + if (file==NULL) + return UNZ_PARAMERROR; + s=(unz64_s*)file; + /* to do : check if number_entry is not truncated */ + pglobal_info32->number_entry = (uLong)s->gi.number_entry; + pglobal_info32->size_comment = s->gi.size_comment; + return UNZ_OK; +} +/* + Translate date/time from Dos format to tm_unz (readable more easilty) +*/ +local void unz64local_DosDateToTmuDate (ZPOS64_T ulDosDate, tm_unz* ptm) +{ + ZPOS64_T uDate; + uDate = (ZPOS64_T)(ulDosDate>>16); + ptm->tm_mday = (uInt)(uDate&0x1f) ; + ptm->tm_mon = (uInt)((((uDate)&0x1E0)/0x20)-1) ; + ptm->tm_year = (uInt)(((uDate&0x0FE00)/0x0200)+1980) ; + + ptm->tm_hour = (uInt) ((ulDosDate &0xF800)/0x800); + ptm->tm_min = (uInt) ((ulDosDate&0x7E0)/0x20) ; + ptm->tm_sec = (uInt) (2*(ulDosDate&0x1f)) ; +} + +/* + Get Info about the current file in the zipfile, with internal only info +*/ +local int unz64local_GetCurrentFileInfoInternal OF((unzFile file, + unz_file_info64 *pfile_info, + unz_file_info64_internal + *pfile_info_internal, + char *szFileName, + uLong fileNameBufferSize, + void *extraField, + uLong extraFieldBufferSize, + char *szComment, + uLong commentBufferSize)); + +local int unz64local_GetCurrentFileInfoInternal (unzFile file, + unz_file_info64 *pfile_info, + unz_file_info64_internal + *pfile_info_internal, + char *szFileName, + uLong fileNameBufferSize, + void *extraField, + uLong extraFieldBufferSize, + char *szComment, + uLong commentBufferSize) +{ + unz64_s* s; + unz_file_info64 file_info; + unz_file_info64_internal file_info_internal; + int err=UNZ_OK; + uLong uMagic; + long lSeek=0; + uLong uL; + + if (file==NULL) + return UNZ_PARAMERROR; + s=(unz64_s*)file; + if (ZSEEK64(s->z_filefunc, s->filestream, + s->pos_in_central_dir+s->byte_before_the_zipfile, + ZLIB_FILEFUNC_SEEK_SET)!=0) + err=UNZ_ERRNO; + + + /* we check the magic */ + if (err==UNZ_OK) + { + if (unz64local_getLong(&s->z_filefunc, s->filestream,&uMagic) != UNZ_OK) + err=UNZ_ERRNO; + else if (uMagic!=0x02014b50) + err=UNZ_BADZIPFILE; + } + + if (unz64local_getShort(&s->z_filefunc, s->filestream,&file_info.version) != UNZ_OK) + err=UNZ_ERRNO; + + if (unz64local_getShort(&s->z_filefunc, s->filestream,&file_info.version_needed) != UNZ_OK) + err=UNZ_ERRNO; + + if (unz64local_getShort(&s->z_filefunc, s->filestream,&file_info.flag) != UNZ_OK) + err=UNZ_ERRNO; + + if (unz64local_getShort(&s->z_filefunc, s->filestream,&file_info.compression_method) != UNZ_OK) + err=UNZ_ERRNO; + + if (unz64local_getLong(&s->z_filefunc, s->filestream,&file_info.dosDate) != UNZ_OK) + err=UNZ_ERRNO; + + unz64local_DosDateToTmuDate(file_info.dosDate,&file_info.tmu_date); + + if (unz64local_getLong(&s->z_filefunc, s->filestream,&file_info.crc) != UNZ_OK) + err=UNZ_ERRNO; + + if (unz64local_getLong(&s->z_filefunc, s->filestream,&uL) != UNZ_OK) + err=UNZ_ERRNO; + file_info.compressed_size = uL; + + if (unz64local_getLong(&s->z_filefunc, s->filestream,&uL) != UNZ_OK) + err=UNZ_ERRNO; + file_info.uncompressed_size = uL; + + if (unz64local_getShort(&s->z_filefunc, s->filestream,&file_info.size_filename) != UNZ_OK) + err=UNZ_ERRNO; + + if (unz64local_getShort(&s->z_filefunc, s->filestream,&file_info.size_file_extra) != UNZ_OK) + err=UNZ_ERRNO; + + if (unz64local_getShort(&s->z_filefunc, s->filestream,&file_info.size_file_comment) != UNZ_OK) + err=UNZ_ERRNO; + + if (unz64local_getShort(&s->z_filefunc, s->filestream,&file_info.disk_num_start) != UNZ_OK) + err=UNZ_ERRNO; + + if (unz64local_getShort(&s->z_filefunc, s->filestream,&file_info.internal_fa) != UNZ_OK) + err=UNZ_ERRNO; + + if (unz64local_getLong(&s->z_filefunc, s->filestream,&file_info.external_fa) != UNZ_OK) + err=UNZ_ERRNO; + + // relative offset of local header + if (unz64local_getLong(&s->z_filefunc, s->filestream,&uL) != UNZ_OK) + err=UNZ_ERRNO; + file_info_internal.offset_curfile = uL; + + lSeek+=file_info.size_filename; + if ((err==UNZ_OK) && (szFileName!=NULL)) + { + uLong uSizeRead ; + if (file_info.size_filename0) && (fileNameBufferSize>0)) + if (ZREAD64(s->z_filefunc, s->filestream,szFileName,uSizeRead)!=uSizeRead) + err=UNZ_ERRNO; + lSeek -= uSizeRead; + } + + // Read extrafield + if ((err==UNZ_OK) && (extraField!=NULL)) + { + ZPOS64_T uSizeRead ; + if (file_info.size_file_extraz_filefunc, s->filestream,lSeek,ZLIB_FILEFUNC_SEEK_CUR)==0) + lSeek=0; + else + err=UNZ_ERRNO; + } + + if ((file_info.size_file_extra>0) && (extraFieldBufferSize>0)) + if (ZREAD64(s->z_filefunc, s->filestream,extraField,(uLong)uSizeRead)!=uSizeRead) + err=UNZ_ERRNO; + + lSeek += file_info.size_file_extra - (uLong)uSizeRead; + } + else + lSeek += file_info.size_file_extra; + + + if ((err==UNZ_OK) && (file_info.size_file_extra != 0)) + { + uLong acc = 0; + + // since lSeek now points to after the extra field we need to move back + lSeek -= file_info.size_file_extra; + + if (lSeek!=0) + { + if (ZSEEK64(s->z_filefunc, s->filestream,lSeek,ZLIB_FILEFUNC_SEEK_CUR)==0) + lSeek=0; + else + err=UNZ_ERRNO; + } + + while(acc < file_info.size_file_extra) + { + uLong headerId; + uLong dataSize; + + if (unz64local_getShort(&s->z_filefunc, s->filestream,&headerId) != UNZ_OK) + err=UNZ_ERRNO; + + if (unz64local_getShort(&s->z_filefunc, s->filestream,&dataSize) != UNZ_OK) + err=UNZ_ERRNO; + + /* ZIP64 extra fields */ + if (headerId == 0x0001) + { + uLong uL; + + if(file_info.uncompressed_size == MAXU32) + { + if (unz64local_getLong64(&s->z_filefunc, s->filestream,&file_info.uncompressed_size) != UNZ_OK) + err=UNZ_ERRNO; + } + + if(file_info.compressed_size == MAXU32) + { + if (unz64local_getLong64(&s->z_filefunc, s->filestream,&file_info.compressed_size) != UNZ_OK) + err=UNZ_ERRNO; + } + + if(file_info_internal.offset_curfile == MAXU32) + { + /* Relative Header offset */ + if (unz64local_getLong64(&s->z_filefunc, s->filestream,&file_info_internal.offset_curfile) != UNZ_OK) + err=UNZ_ERRNO; + } + + if(file_info.disk_num_start == MAXU32) + { + /* Disk Start Number */ + if (unz64local_getLong(&s->z_filefunc, s->filestream,&uL) != UNZ_OK) + err=UNZ_ERRNO; + } + + } + else + { + if (ZSEEK64(s->z_filefunc, s->filestream,dataSize,ZLIB_FILEFUNC_SEEK_CUR)!=0) + err=UNZ_ERRNO; + } + + acc += 2 + 2 + dataSize; + } + } + + if ((err==UNZ_OK) && (szComment!=NULL)) + { + uLong uSizeRead ; + if (file_info.size_file_commentz_filefunc, s->filestream,lSeek,ZLIB_FILEFUNC_SEEK_CUR)==0) + lSeek=0; + else + err=UNZ_ERRNO; + } + + if ((file_info.size_file_comment>0) && (commentBufferSize>0)) + if (ZREAD64(s->z_filefunc, s->filestream,szComment,uSizeRead)!=uSizeRead) + err=UNZ_ERRNO; + lSeek+=file_info.size_file_comment - uSizeRead; + } + else + lSeek+=file_info.size_file_comment; + + + if ((err==UNZ_OK) && (pfile_info!=NULL)) + *pfile_info=file_info; + + if ((err==UNZ_OK) && (pfile_info_internal!=NULL)) + *pfile_info_internal=file_info_internal; + + return err; +} + + + +/* + Write info about the ZipFile in the *pglobal_info structure. + No preparation of the structure is needed + return UNZ_OK if there is no problem. +*/ +extern int ZEXPORT unzGetCurrentFileInfo64 (unzFile file, + unz_file_info64 * pfile_info, + char * szFileName, uLong fileNameBufferSize, + void *extraField, uLong extraFieldBufferSize, + char* szComment, uLong commentBufferSize) +{ + return unz64local_GetCurrentFileInfoInternal(file,pfile_info,NULL, + szFileName,fileNameBufferSize, + extraField,extraFieldBufferSize, + szComment,commentBufferSize); +} + +extern int ZEXPORT unzGetCurrentFileInfo (unzFile file, + unz_file_info * pfile_info, + char * szFileName, uLong fileNameBufferSize, + void *extraField, uLong extraFieldBufferSize, + char* szComment, uLong commentBufferSize) +{ + int err; + unz_file_info64 file_info64; + err = unz64local_GetCurrentFileInfoInternal(file,&file_info64,NULL, + szFileName,fileNameBufferSize, + extraField,extraFieldBufferSize, + szComment,commentBufferSize); + if ((err==UNZ_OK) && (pfile_info != NULL)) + { + pfile_info->version = file_info64.version; + pfile_info->version_needed = file_info64.version_needed; + pfile_info->flag = file_info64.flag; + pfile_info->compression_method = file_info64.compression_method; + pfile_info->dosDate = file_info64.dosDate; + pfile_info->crc = file_info64.crc; + + pfile_info->size_filename = file_info64.size_filename; + pfile_info->size_file_extra = file_info64.size_file_extra; + pfile_info->size_file_comment = file_info64.size_file_comment; + + pfile_info->disk_num_start = file_info64.disk_num_start; + pfile_info->internal_fa = file_info64.internal_fa; + pfile_info->external_fa = file_info64.external_fa; + + pfile_info->tmu_date = file_info64.tmu_date, + + + pfile_info->compressed_size = (uLong)file_info64.compressed_size; + pfile_info->uncompressed_size = (uLong)file_info64.uncompressed_size; + + } + return err; +} +/* + Set the current file of the zipfile to the first file. + return UNZ_OK if there is no problem +*/ +extern int ZEXPORT unzGoToFirstFile (unzFile file) +{ + int err=UNZ_OK; + unz64_s* s; + if (file==NULL) + return UNZ_PARAMERROR; + s=(unz64_s*)file; + s->pos_in_central_dir=s->offset_central_dir; + s->num_file=0; + err=unz64local_GetCurrentFileInfoInternal(file,&s->cur_file_info, + &s->cur_file_info_internal, + NULL,0,NULL,0,NULL,0); + s->current_file_ok = (err == UNZ_OK); + return err; +} + +/* + Set the current file of the zipfile to the next file. + return UNZ_OK if there is no problem + return UNZ_END_OF_LIST_OF_FILE if the actual file was the latest. +*/ +extern int ZEXPORT unzGoToNextFile (unzFile file) +{ + unz64_s* s; + int err; + + if (file==NULL) + return UNZ_PARAMERROR; + s=(unz64_s*)file; + if (!s->current_file_ok) + return UNZ_END_OF_LIST_OF_FILE; + if (s->gi.number_entry != 0xffff) /* 2^16 files overflow hack */ + if (s->num_file+1==s->gi.number_entry) + return UNZ_END_OF_LIST_OF_FILE; + + s->pos_in_central_dir += SIZECENTRALDIRITEM + s->cur_file_info.size_filename + + s->cur_file_info.size_file_extra + s->cur_file_info.size_file_comment ; + s->num_file++; + err = unz64local_GetCurrentFileInfoInternal(file,&s->cur_file_info, + &s->cur_file_info_internal, + NULL,0,NULL,0,NULL,0); + s->current_file_ok = (err == UNZ_OK); + return err; +} + + +/* + Try locate the file szFileName in the zipfile. + For the iCaseSensitivity signification, see unzStringFileNameCompare + + return value : + UNZ_OK if the file is found. It becomes the current file. + UNZ_END_OF_LIST_OF_FILE if the file is not found +*/ +extern int ZEXPORT unzLocateFile (unzFile file, const char *szFileName, int iCaseSensitivity) +{ + unz64_s* s; + int err; + + /* We remember the 'current' position in the file so that we can jump + * back there if we fail. + */ + unz_file_info64 cur_file_infoSaved; + unz_file_info64_internal cur_file_info_internalSaved; + ZPOS64_T num_fileSaved; + ZPOS64_T pos_in_central_dirSaved; + + + if (file==NULL) + return UNZ_PARAMERROR; + + if (strlen(szFileName)>=UNZ_MAXFILENAMEINZIP) + return UNZ_PARAMERROR; + + s=(unz64_s*)file; + if (!s->current_file_ok) + return UNZ_END_OF_LIST_OF_FILE; + + /* Save the current state */ + num_fileSaved = s->num_file; + pos_in_central_dirSaved = s->pos_in_central_dir; + cur_file_infoSaved = s->cur_file_info; + cur_file_info_internalSaved = s->cur_file_info_internal; + + err = unzGoToFirstFile(file); + + while (err == UNZ_OK) + { + char szCurrentFileName[UNZ_MAXFILENAMEINZIP+1]; + err = unzGetCurrentFileInfo64(file,NULL, + szCurrentFileName,sizeof(szCurrentFileName)-1, + NULL,0,NULL,0); + if (err == UNZ_OK) + { + if (unzStringFileNameCompare(szCurrentFileName, + szFileName,iCaseSensitivity)==0) + return UNZ_OK; + err = unzGoToNextFile(file); + } + } + + /* We failed, so restore the state of the 'current file' to where we + * were. + */ + s->num_file = num_fileSaved ; + s->pos_in_central_dir = pos_in_central_dirSaved ; + s->cur_file_info = cur_file_infoSaved; + s->cur_file_info_internal = cur_file_info_internalSaved; + return err; +} + + +/* +/////////////////////////////////////////// +// Contributed by Ryan Haksi (mailto://cryogen@infoserve.net) +// I need random access +// +// Further optimization could be realized by adding an ability +// to cache the directory in memory. The goal being a single +// comprehensive file read to put the file I need in a memory. +*/ + +/* +typedef struct unz_file_pos_s +{ + ZPOS64_T pos_in_zip_directory; // offset in file + ZPOS64_T num_of_file; // # of file +} unz_file_pos; +*/ + +extern int ZEXPORT unzGetFilePos64(unzFile file, unz64_file_pos* file_pos) +{ + unz64_s* s; + + if (file==NULL || file_pos==NULL) + return UNZ_PARAMERROR; + s=(unz64_s*)file; + if (!s->current_file_ok) + return UNZ_END_OF_LIST_OF_FILE; + + file_pos->pos_in_zip_directory = s->pos_in_central_dir; + file_pos->num_of_file = s->num_file; + + return UNZ_OK; +} + +extern int ZEXPORT unzGetFilePos( + unzFile file, + unz_file_pos* file_pos) +{ + unz64_file_pos file_pos64; + int err = unzGetFilePos64(file,&file_pos64); + if (err==UNZ_OK) + { + file_pos->pos_in_zip_directory = (uLong)file_pos64.pos_in_zip_directory; + file_pos->num_of_file = (uLong)file_pos64.num_of_file; + } + return err; +} + +extern int ZEXPORT unzGoToFilePos64(unzFile file, const unz64_file_pos* file_pos) +{ + unz64_s* s; + int err; + + if (file==NULL || file_pos==NULL) + return UNZ_PARAMERROR; + s=(unz64_s*)file; + + /* jump to the right spot */ + s->pos_in_central_dir = file_pos->pos_in_zip_directory; + s->num_file = file_pos->num_of_file; + + /* set the current file */ + err = unz64local_GetCurrentFileInfoInternal(file,&s->cur_file_info, + &s->cur_file_info_internal, + NULL,0,NULL,0,NULL,0); + /* return results */ + s->current_file_ok = (err == UNZ_OK); + return err; +} + +extern int ZEXPORT unzGoToFilePos( + unzFile file, + unz_file_pos* file_pos) +{ + unz64_file_pos file_pos64; + if (file_pos == NULL) + return UNZ_PARAMERROR; + + file_pos64.pos_in_zip_directory = file_pos->pos_in_zip_directory; + file_pos64.num_of_file = file_pos->num_of_file; + return unzGoToFilePos64(file,&file_pos64); +} + +/* +// Unzip Helper Functions - should be here? +/////////////////////////////////////////// +*/ + +/* + Read the local header of the current zipfile + Check the coherency of the local header and info in the end of central + directory about this file + store in *piSizeVar the size of extra info in local header + (filename and size of extra field data) +*/ +local int unz64local_CheckCurrentFileCoherencyHeader (unz64_s* s, uInt* piSizeVar, + ZPOS64_T * poffset_local_extrafield, + uInt * psize_local_extrafield) +{ + uLong uMagic,uData,uFlags; + uLong size_filename; + uLong size_extra_field; + int err=UNZ_OK; + + *piSizeVar = 0; + *poffset_local_extrafield = 0; + *psize_local_extrafield = 0; + + if (ZSEEK64(s->z_filefunc, s->filestream,s->cur_file_info_internal.offset_curfile + + s->byte_before_the_zipfile,ZLIB_FILEFUNC_SEEK_SET)!=0) + return UNZ_ERRNO; + + + if (err==UNZ_OK) + { + if (unz64local_getLong(&s->z_filefunc, s->filestream,&uMagic) != UNZ_OK) + err=UNZ_ERRNO; + else if (uMagic!=0x04034b50) + err=UNZ_BADZIPFILE; + } + + if (unz64local_getShort(&s->z_filefunc, s->filestream,&uData) != UNZ_OK) + err=UNZ_ERRNO; +/* + else if ((err==UNZ_OK) && (uData!=s->cur_file_info.wVersion)) + err=UNZ_BADZIPFILE; +*/ + if (unz64local_getShort(&s->z_filefunc, s->filestream,&uFlags) != UNZ_OK) + err=UNZ_ERRNO; + + if (unz64local_getShort(&s->z_filefunc, s->filestream,&uData) != UNZ_OK) + err=UNZ_ERRNO; + else if ((err==UNZ_OK) && (uData!=s->cur_file_info.compression_method)) + err=UNZ_BADZIPFILE; + + if ((err==UNZ_OK) && (s->cur_file_info.compression_method!=0) && +/* #ifdef HAVE_BZIP2 */ + (s->cur_file_info.compression_method!=Z_BZIP2ED) && +/* #endif */ + (s->cur_file_info.compression_method!=Z_DEFLATED)) + err=UNZ_BADZIPFILE; + + if (unz64local_getLong(&s->z_filefunc, s->filestream,&uData) != UNZ_OK) /* date/time */ + err=UNZ_ERRNO; + + if (unz64local_getLong(&s->z_filefunc, s->filestream,&uData) != UNZ_OK) /* crc */ + err=UNZ_ERRNO; + else if ((err==UNZ_OK) && (uData!=s->cur_file_info.crc) && ((uFlags & 8)==0)) + err=UNZ_BADZIPFILE; + + if (unz64local_getLong(&s->z_filefunc, s->filestream,&uData) != UNZ_OK) /* size compr */ + err=UNZ_ERRNO; + else if (uData != 0xFFFFFFFF && (err==UNZ_OK) && (uData!=s->cur_file_info.compressed_size) && ((uFlags & 8)==0)) + err=UNZ_BADZIPFILE; + + if (unz64local_getLong(&s->z_filefunc, s->filestream,&uData) != UNZ_OK) /* size uncompr */ + err=UNZ_ERRNO; + else if (uData != 0xFFFFFFFF && (err==UNZ_OK) && (uData!=s->cur_file_info.uncompressed_size) && ((uFlags & 8)==0)) + err=UNZ_BADZIPFILE; + + if (unz64local_getShort(&s->z_filefunc, s->filestream,&size_filename) != UNZ_OK) + err=UNZ_ERRNO; + else if ((err==UNZ_OK) && (size_filename!=s->cur_file_info.size_filename)) + err=UNZ_BADZIPFILE; + + *piSizeVar += (uInt)size_filename; + + if (unz64local_getShort(&s->z_filefunc, s->filestream,&size_extra_field) != UNZ_OK) + err=UNZ_ERRNO; + *poffset_local_extrafield= s->cur_file_info_internal.offset_curfile + + SIZEZIPLOCALHEADER + size_filename; + *psize_local_extrafield = (uInt)size_extra_field; + + *piSizeVar += (uInt)size_extra_field; + + return err; +} + +/* + Open for reading data the current file in the zipfile. + If there is no error and the file is opened, the return value is UNZ_OK. +*/ +extern int ZEXPORT unzOpenCurrentFile3 (unzFile file, int* method, + int* level, int raw, const char* password) +{ + int err=UNZ_OK; + uInt iSizeVar; + unz64_s* s; + file_in_zip64_read_info_s* pfile_in_zip_read_info; + ZPOS64_T offset_local_extrafield; /* offset of the local extra field */ + uInt size_local_extrafield; /* size of the local extra field */ +# ifndef NOUNCRYPT + char source[12]; +# else + if (password != NULL) + return UNZ_PARAMERROR; +# endif + + if (file==NULL) + return UNZ_PARAMERROR; + s=(unz64_s*)file; + if (!s->current_file_ok) + return UNZ_PARAMERROR; + + if (s->pfile_in_zip_read != NULL) + unzCloseCurrentFile(file); + + if (unz64local_CheckCurrentFileCoherencyHeader(s,&iSizeVar, &offset_local_extrafield,&size_local_extrafield)!=UNZ_OK) + return UNZ_BADZIPFILE; + + pfile_in_zip_read_info = (file_in_zip64_read_info_s*)ALLOC(sizeof(file_in_zip64_read_info_s)); + if (pfile_in_zip_read_info==NULL) + return UNZ_INTERNALERROR; + + pfile_in_zip_read_info->read_buffer=(char*)ALLOC(UNZ_BUFSIZE); + pfile_in_zip_read_info->offset_local_extrafield = offset_local_extrafield; + pfile_in_zip_read_info->size_local_extrafield = size_local_extrafield; + pfile_in_zip_read_info->pos_local_extrafield=0; + pfile_in_zip_read_info->raw=raw; + + if (pfile_in_zip_read_info->read_buffer==NULL) + { + TRYFREE(pfile_in_zip_read_info); + return UNZ_INTERNALERROR; + } + + pfile_in_zip_read_info->stream_initialised=0; + + if (method!=NULL) + *method = (int)s->cur_file_info.compression_method; + + if (level!=NULL) + { + *level = 6; + switch (s->cur_file_info.flag & 0x06) + { + case 6 : *level = 1; break; + case 4 : *level = 2; break; + case 2 : *level = 9; break; + } + } + + if ((s->cur_file_info.compression_method!=0) && +/* #ifdef HAVE_BZIP2 */ + (s->cur_file_info.compression_method!=Z_BZIP2ED) && +/* #endif */ + (s->cur_file_info.compression_method!=Z_DEFLATED)) + + err=UNZ_BADZIPFILE; + + pfile_in_zip_read_info->crc32_wait=s->cur_file_info.crc; + pfile_in_zip_read_info->crc32=0; + pfile_in_zip_read_info->total_out_64=0; + pfile_in_zip_read_info->compression_method = s->cur_file_info.compression_method; + pfile_in_zip_read_info->filestream=s->filestream; + pfile_in_zip_read_info->z_filefunc=s->z_filefunc; + pfile_in_zip_read_info->byte_before_the_zipfile=s->byte_before_the_zipfile; + + pfile_in_zip_read_info->stream.total_out = 0; + + if ((s->cur_file_info.compression_method==Z_BZIP2ED) && (!raw)) + { +#ifdef HAVE_BZIP2 + pfile_in_zip_read_info->bstream.bzalloc = (void *(*) (void *, int, int))0; + pfile_in_zip_read_info->bstream.bzfree = (free_func)0; + pfile_in_zip_read_info->bstream.opaque = (voidpf)0; + pfile_in_zip_read_info->bstream.state = (voidpf)0; + + pfile_in_zip_read_info->stream.zalloc = (alloc_func)0; + pfile_in_zip_read_info->stream.zfree = (free_func)0; + pfile_in_zip_read_info->stream.opaque = (voidpf)0; + pfile_in_zip_read_info->stream.next_in = (voidpf)0; + pfile_in_zip_read_info->stream.avail_in = 0; + + err=BZ2_bzDecompressInit(&pfile_in_zip_read_info->bstream, 0, 0); + if (err == Z_OK) + pfile_in_zip_read_info->stream_initialised=Z_BZIP2ED; + else + { + TRYFREE(pfile_in_zip_read_info); + return err; + } +#else + pfile_in_zip_read_info->raw=1; +#endif + } + else if ((s->cur_file_info.compression_method==Z_DEFLATED) && (!raw)) + { + pfile_in_zip_read_info->stream.zalloc = (alloc_func)0; + pfile_in_zip_read_info->stream.zfree = (free_func)0; + pfile_in_zip_read_info->stream.opaque = (voidpf)0; + pfile_in_zip_read_info->stream.next_in = 0; + pfile_in_zip_read_info->stream.avail_in = 0; + + err=inflateInit2(&pfile_in_zip_read_info->stream, -MAX_WBITS); + if (err == Z_OK) + pfile_in_zip_read_info->stream_initialised=Z_DEFLATED; + else + { + TRYFREE(pfile_in_zip_read_info); + return err; + } + /* windowBits is passed < 0 to tell that there is no zlib header. + * Note that in this case inflate *requires* an extra "dummy" byte + * after the compressed stream in order to complete decompression and + * return Z_STREAM_END. + * In unzip, i don't wait absolutely Z_STREAM_END because I known the + * size of both compressed and uncompressed data + */ + } + pfile_in_zip_read_info->rest_read_compressed = + s->cur_file_info.compressed_size ; + pfile_in_zip_read_info->rest_read_uncompressed = + s->cur_file_info.uncompressed_size ; + + + pfile_in_zip_read_info->pos_in_zipfile = + s->cur_file_info_internal.offset_curfile + SIZEZIPLOCALHEADER + + iSizeVar; + + pfile_in_zip_read_info->stream.avail_in = (uInt)0; + + s->pfile_in_zip_read = pfile_in_zip_read_info; + s->encrypted = 0; + +# ifndef NOUNCRYPT + if (password != NULL) + { + int i; + s->pcrc_32_tab = get_crc_table(); + init_keys(password,s->keys,s->pcrc_32_tab); + if (ZSEEK64(s->z_filefunc, s->filestream, + s->pfile_in_zip_read->pos_in_zipfile + + s->pfile_in_zip_read->byte_before_the_zipfile, + SEEK_SET)!=0) + return UNZ_INTERNALERROR; + if(ZREAD64(s->z_filefunc, s->filestream,source, 12)<12) + return UNZ_INTERNALERROR; + + for (i = 0; i<12; i++) + zdecode(s->keys,s->pcrc_32_tab,source[i]); + + s->pfile_in_zip_read->pos_in_zipfile+=12; + s->encrypted=1; + } +# endif + + + return UNZ_OK; +} + +extern int ZEXPORT unzOpenCurrentFile (unzFile file) +{ + return unzOpenCurrentFile3(file, NULL, NULL, 0, NULL); +} + +extern int ZEXPORT unzOpenCurrentFilePassword (unzFile file, const char* password) +{ + return unzOpenCurrentFile3(file, NULL, NULL, 0, password); +} + +extern int ZEXPORT unzOpenCurrentFile2 (unzFile file, int* method, int* level, int raw) +{ + return unzOpenCurrentFile3(file, method, level, raw, NULL); +} + +/** Addition for GDAL : START */ + +extern ZPOS64_T ZEXPORT unzGetCurrentFileZStreamPos64( unzFile file) +{ + unz64_s* s; + file_in_zip64_read_info_s* pfile_in_zip_read_info; + s=(unz64_s*)file; + if (file==NULL) + return 0; //UNZ_PARAMERROR; + pfile_in_zip_read_info=s->pfile_in_zip_read; + if (pfile_in_zip_read_info==NULL) + return 0; //UNZ_PARAMERROR; + return pfile_in_zip_read_info->pos_in_zipfile + + pfile_in_zip_read_info->byte_before_the_zipfile; +} + +/** Addition for GDAL : END */ + +/* + Read bytes from the current file. + buf contain buffer where data must be copied + len the size of buf. + + return the number of byte copied if somes bytes are copied + return 0 if the end of file was reached + return <0 with error code if there is an error + (UNZ_ERRNO for IO error, or zLib error for uncompress error) +*/ +extern int ZEXPORT unzReadCurrentFile (unzFile file, voidp buf, unsigned len) +{ + int err=UNZ_OK; + uInt iRead = 0; + unz64_s* s; + file_in_zip64_read_info_s* pfile_in_zip_read_info; + if (file==NULL) + return UNZ_PARAMERROR; + s=(unz64_s*)file; + pfile_in_zip_read_info=s->pfile_in_zip_read; + + if (pfile_in_zip_read_info==NULL) + return UNZ_PARAMERROR; + + + if (pfile_in_zip_read_info->read_buffer == NULL) + return UNZ_END_OF_LIST_OF_FILE; + if (len==0) + return 0; + + pfile_in_zip_read_info->stream.next_out = (Bytef*)buf; + + pfile_in_zip_read_info->stream.avail_out = (uInt)len; + + if ((len>pfile_in_zip_read_info->rest_read_uncompressed) && + (!(pfile_in_zip_read_info->raw))) + pfile_in_zip_read_info->stream.avail_out = + (uInt)pfile_in_zip_read_info->rest_read_uncompressed; + + if ((len>pfile_in_zip_read_info->rest_read_compressed+ + pfile_in_zip_read_info->stream.avail_in) && + (pfile_in_zip_read_info->raw)) + pfile_in_zip_read_info->stream.avail_out = + (uInt)pfile_in_zip_read_info->rest_read_compressed+ + pfile_in_zip_read_info->stream.avail_in; + + while (pfile_in_zip_read_info->stream.avail_out>0) + { + if ((pfile_in_zip_read_info->stream.avail_in==0) && + (pfile_in_zip_read_info->rest_read_compressed>0)) + { + uInt uReadThis = UNZ_BUFSIZE; + if (pfile_in_zip_read_info->rest_read_compressedrest_read_compressed; + if (uReadThis == 0) + return UNZ_EOF; + if (ZSEEK64(pfile_in_zip_read_info->z_filefunc, + pfile_in_zip_read_info->filestream, + pfile_in_zip_read_info->pos_in_zipfile + + pfile_in_zip_read_info->byte_before_the_zipfile, + ZLIB_FILEFUNC_SEEK_SET)!=0) + return UNZ_ERRNO; + if (ZREAD64(pfile_in_zip_read_info->z_filefunc, + pfile_in_zip_read_info->filestream, + pfile_in_zip_read_info->read_buffer, + uReadThis)!=uReadThis) + return UNZ_ERRNO; + + +# ifndef NOUNCRYPT + if(s->encrypted) + { + uInt i; + for(i=0;iread_buffer[i] = + zdecode(s->keys,s->pcrc_32_tab, + pfile_in_zip_read_info->read_buffer[i]); + } +# endif + + + pfile_in_zip_read_info->pos_in_zipfile += uReadThis; + + pfile_in_zip_read_info->rest_read_compressed-=uReadThis; + + pfile_in_zip_read_info->stream.next_in = + (Bytef*)pfile_in_zip_read_info->read_buffer; + pfile_in_zip_read_info->stream.avail_in = (uInt)uReadThis; + } + + if ((pfile_in_zip_read_info->compression_method==0) || (pfile_in_zip_read_info->raw)) + { + uInt uDoCopy,i ; + + if ((pfile_in_zip_read_info->stream.avail_in == 0) && + (pfile_in_zip_read_info->rest_read_compressed == 0)) + return (iRead==0) ? UNZ_EOF : iRead; + + if (pfile_in_zip_read_info->stream.avail_out < + pfile_in_zip_read_info->stream.avail_in) + uDoCopy = pfile_in_zip_read_info->stream.avail_out ; + else + uDoCopy = pfile_in_zip_read_info->stream.avail_in ; + + for (i=0;istream.next_out+i) = + *(pfile_in_zip_read_info->stream.next_in+i); + + pfile_in_zip_read_info->total_out_64 = pfile_in_zip_read_info->total_out_64 + uDoCopy; + + pfile_in_zip_read_info->crc32 = crc32(pfile_in_zip_read_info->crc32, + pfile_in_zip_read_info->stream.next_out, + uDoCopy); + pfile_in_zip_read_info->rest_read_uncompressed-=uDoCopy; + pfile_in_zip_read_info->stream.avail_in -= uDoCopy; + pfile_in_zip_read_info->stream.avail_out -= uDoCopy; + pfile_in_zip_read_info->stream.next_out += uDoCopy; + pfile_in_zip_read_info->stream.next_in += uDoCopy; + pfile_in_zip_read_info->stream.total_out += uDoCopy; + iRead += uDoCopy; + } + else if (pfile_in_zip_read_info->compression_method==Z_BZIP2ED) + { +#ifdef HAVE_BZIP2 + uLong uTotalOutBefore,uTotalOutAfter; + const Bytef *bufBefore; + uLong uOutThis; + + pfile_in_zip_read_info->bstream.next_in = (char*)pfile_in_zip_read_info->stream.next_in; + pfile_in_zip_read_info->bstream.avail_in = pfile_in_zip_read_info->stream.avail_in; + pfile_in_zip_read_info->bstream.total_in_lo32 = pfile_in_zip_read_info->stream.total_in; + pfile_in_zip_read_info->bstream.total_in_hi32 = 0; + pfile_in_zip_read_info->bstream.next_out = (char*)pfile_in_zip_read_info->stream.next_out; + pfile_in_zip_read_info->bstream.avail_out = pfile_in_zip_read_info->stream.avail_out; + pfile_in_zip_read_info->bstream.total_out_lo32 = pfile_in_zip_read_info->stream.total_out; + pfile_in_zip_read_info->bstream.total_out_hi32 = 0; + + uTotalOutBefore = pfile_in_zip_read_info->bstream.total_out_lo32; + bufBefore = (const Bytef *)pfile_in_zip_read_info->bstream.next_out; + + err=BZ2_bzDecompress(&pfile_in_zip_read_info->bstream); + + uTotalOutAfter = pfile_in_zip_read_info->bstream.total_out_lo32; + uOutThis = uTotalOutAfter-uTotalOutBefore; + + pfile_in_zip_read_info->total_out_64 = pfile_in_zip_read_info->total_out_64 + uOutThis; + + pfile_in_zip_read_info->crc32 = crc32(pfile_in_zip_read_info->crc32,bufBefore, (uInt)(uOutThis)); + pfile_in_zip_read_info->rest_read_uncompressed -= uOutThis; + iRead += (uInt)(uTotalOutAfter - uTotalOutBefore); + + pfile_in_zip_read_info->stream.next_in = (Bytef*)pfile_in_zip_read_info->bstream.next_in; + pfile_in_zip_read_info->stream.avail_in = pfile_in_zip_read_info->bstream.avail_in; + pfile_in_zip_read_info->stream.total_in = pfile_in_zip_read_info->bstream.total_in_lo32; + pfile_in_zip_read_info->stream.next_out = (Bytef*)pfile_in_zip_read_info->bstream.next_out; + pfile_in_zip_read_info->stream.avail_out = pfile_in_zip_read_info->bstream.avail_out; + pfile_in_zip_read_info->stream.total_out = pfile_in_zip_read_info->bstream.total_out_lo32; + + if (err==BZ_STREAM_END) + return (iRead==0) ? UNZ_EOF : iRead; + if (err!=BZ_OK) + break; +#endif + } // end Z_BZIP2ED + else + { + ZPOS64_T uTotalOutBefore,uTotalOutAfter; + const Bytef *bufBefore; + ZPOS64_T uOutThis; + int flush=Z_SYNC_FLUSH; + + uTotalOutBefore = pfile_in_zip_read_info->stream.total_out; + bufBefore = pfile_in_zip_read_info->stream.next_out; + + /* + if ((pfile_in_zip_read_info->rest_read_uncompressed == + pfile_in_zip_read_info->stream.avail_out) && + (pfile_in_zip_read_info->rest_read_compressed == 0)) + flush = Z_FINISH; + */ + err=inflate(&pfile_in_zip_read_info->stream,flush); + + if ((err>=0) && (pfile_in_zip_read_info->stream.msg!=NULL)) + err = Z_DATA_ERROR; + + uTotalOutAfter = pfile_in_zip_read_info->stream.total_out; + uOutThis = uTotalOutAfter-uTotalOutBefore; + + pfile_in_zip_read_info->total_out_64 = pfile_in_zip_read_info->total_out_64 + uOutThis; + + pfile_in_zip_read_info->crc32 = + crc32(pfile_in_zip_read_info->crc32,bufBefore, + (uInt)(uOutThis)); + + pfile_in_zip_read_info->rest_read_uncompressed -= + uOutThis; + + iRead += (uInt)(uTotalOutAfter - uTotalOutBefore); + + if (err==Z_STREAM_END) + return (iRead==0) ? UNZ_EOF : iRead; + if (err!=Z_OK) + break; + } + } + + if (err==Z_OK) + return iRead; + return err; +} + + +/* + Give the current position in uncompressed data +*/ +extern z_off_t ZEXPORT unztell (unzFile file) +{ + unz64_s* s; + file_in_zip64_read_info_s* pfile_in_zip_read_info; + if (file==NULL) + return UNZ_PARAMERROR; + s=(unz64_s*)file; + pfile_in_zip_read_info=s->pfile_in_zip_read; + + if (pfile_in_zip_read_info==NULL) + return UNZ_PARAMERROR; + + return (z_off_t)pfile_in_zip_read_info->stream.total_out; +} + +extern ZPOS64_T ZEXPORT unztell64 (unzFile file) +{ + + unz64_s* s; + file_in_zip64_read_info_s* pfile_in_zip_read_info; + if (file==NULL) + return (ZPOS64_T)-1; + s=(unz64_s*)file; + pfile_in_zip_read_info=s->pfile_in_zip_read; + + if (pfile_in_zip_read_info==NULL) + return (ZPOS64_T)-1; + + return pfile_in_zip_read_info->total_out_64; +} + + +/* + return 1 if the end of file was reached, 0 elsewhere +*/ +extern int ZEXPORT unzeof (unzFile file) +{ + unz64_s* s; + file_in_zip64_read_info_s* pfile_in_zip_read_info; + if (file==NULL) + return UNZ_PARAMERROR; + s=(unz64_s*)file; + pfile_in_zip_read_info=s->pfile_in_zip_read; + + if (pfile_in_zip_read_info==NULL) + return UNZ_PARAMERROR; + + if (pfile_in_zip_read_info->rest_read_uncompressed == 0) + return 1; + else + return 0; +} + + + +/* +Read extra field from the current file (opened by unzOpenCurrentFile) +This is the local-header version of the extra field (sometimes, there is +more info in the local-header version than in the central-header) + + if buf==NULL, it return the size of the local extra field that can be read + + if buf!=NULL, len is the size of the buffer, the extra header is copied in + buf. + the return value is the number of bytes copied in buf, or (if <0) + the error code +*/ +extern int ZEXPORT unzGetLocalExtrafield (unzFile file, voidp buf, unsigned len) +{ + unz64_s* s; + file_in_zip64_read_info_s* pfile_in_zip_read_info; + uInt read_now; + ZPOS64_T size_to_read; + + if (file==NULL) + return UNZ_PARAMERROR; + s=(unz64_s*)file; + pfile_in_zip_read_info=s->pfile_in_zip_read; + + if (pfile_in_zip_read_info==NULL) + return UNZ_PARAMERROR; + + size_to_read = (pfile_in_zip_read_info->size_local_extrafield - + pfile_in_zip_read_info->pos_local_extrafield); + + if (buf==NULL) + return (int)size_to_read; + + if (len>size_to_read) + read_now = (uInt)size_to_read; + else + read_now = (uInt)len ; + + if (read_now==0) + return 0; + + if (ZSEEK64(pfile_in_zip_read_info->z_filefunc, + pfile_in_zip_read_info->filestream, + pfile_in_zip_read_info->offset_local_extrafield + + pfile_in_zip_read_info->pos_local_extrafield, + ZLIB_FILEFUNC_SEEK_SET)!=0) + return UNZ_ERRNO; + + if (ZREAD64(pfile_in_zip_read_info->z_filefunc, + pfile_in_zip_read_info->filestream, + buf,read_now)!=read_now) + return UNZ_ERRNO; + + return (int)read_now; +} + +/* + Close the file in zip opened with unzOpenCurrentFile + Return UNZ_CRCERROR if all the file was read but the CRC is not good +*/ +extern int ZEXPORT unzCloseCurrentFile (unzFile file) +{ + int err=UNZ_OK; + + unz64_s* s; + file_in_zip64_read_info_s* pfile_in_zip_read_info; + if (file==NULL) + return UNZ_PARAMERROR; + s=(unz64_s*)file; + pfile_in_zip_read_info=s->pfile_in_zip_read; + + if (pfile_in_zip_read_info==NULL) + return UNZ_PARAMERROR; + + + if ((pfile_in_zip_read_info->rest_read_uncompressed == 0) && + (!pfile_in_zip_read_info->raw)) + { + if (pfile_in_zip_read_info->crc32 != pfile_in_zip_read_info->crc32_wait) + err=UNZ_CRCERROR; + } + + + TRYFREE(pfile_in_zip_read_info->read_buffer); + pfile_in_zip_read_info->read_buffer = NULL; + if (pfile_in_zip_read_info->stream_initialised == Z_DEFLATED) + inflateEnd(&pfile_in_zip_read_info->stream); +#ifdef HAVE_BZIP2 + else if (pfile_in_zip_read_info->stream_initialised == Z_BZIP2ED) + BZ2_bzDecompressEnd(&pfile_in_zip_read_info->bstream); +#endif + + + pfile_in_zip_read_info->stream_initialised = 0; + TRYFREE(pfile_in_zip_read_info); + + s->pfile_in_zip_read=NULL; + + return err; +} + + +/* + Get the global comment string of the ZipFile, in the szComment buffer. + uSizeBuf is the size of the szComment buffer. + return the number of byte copied or an error code <0 +*/ +extern int ZEXPORT unzGetGlobalComment (unzFile file, char * szComment, uLong uSizeBuf) +{ + unz64_s* s; + uLong uReadThis ; + if (file==NULL) + return (int)UNZ_PARAMERROR; + s=(unz64_s*)file; + + uReadThis = uSizeBuf; + if (uReadThis>s->gi.size_comment) + uReadThis = s->gi.size_comment; + + if (ZSEEK64(s->z_filefunc,s->filestream,s->central_pos+22,ZLIB_FILEFUNC_SEEK_SET)!=0) + return UNZ_ERRNO; + + if (uReadThis>0) + { + *szComment='\0'; + if (ZREAD64(s->z_filefunc,s->filestream,szComment,uReadThis)!=uReadThis) + return UNZ_ERRNO; + } + + if ((szComment != NULL) && (uSizeBuf > s->gi.size_comment)) + *(szComment+s->gi.size_comment)='\0'; + return (int)uReadThis; +} + +/* Additions by RX '2004 */ +extern ZPOS64_T ZEXPORT unzGetOffset64(unzFile file) +{ + unz64_s* s; + + if (file==NULL) + return 0; //UNZ_PARAMERROR; + s=(unz64_s*)file; + if (!s->current_file_ok) + return 0; + if (s->gi.number_entry != 0 && s->gi.number_entry != 0xffff) + if (s->num_file==s->gi.number_entry) + return 0; + return s->pos_in_central_dir; +} + +extern uLong ZEXPORT unzGetOffset (unzFile file) +{ + ZPOS64_T offset64; + + if (file==NULL) + return 0; //UNZ_PARAMERROR; + offset64 = unzGetOffset64(file); + return (uLong)offset64; +} + +extern int ZEXPORT unzSetOffset64(unzFile file, ZPOS64_T pos) +{ + unz64_s* s; + int err; + + if (file==NULL) + return UNZ_PARAMERROR; + s=(unz64_s*)file; + + s->pos_in_central_dir = pos; + s->num_file = s->gi.number_entry; /* hack */ + err = unz64local_GetCurrentFileInfoInternal(file,&s->cur_file_info, + &s->cur_file_info_internal, + NULL,0,NULL,0,NULL,0); + s->current_file_ok = (err == UNZ_OK); + return err; +} + +extern int ZEXPORT unzSetOffset (unzFile file, uLong pos) +{ + return unzSetOffset64(file,pos); +} diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/minizip/unzip.h b/software/scsi2sd-util/zlib-1.2.8/contrib/minizip/unzip.h new file mode 100644 index 0000000..2104e39 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/minizip/unzip.h @@ -0,0 +1,437 @@ +/* unzip.h -- IO for uncompress .zip files using zlib + Version 1.1, February 14h, 2010 + part of the MiniZip project - ( http://www.winimage.com/zLibDll/minizip.html ) + + Copyright (C) 1998-2010 Gilles Vollant (minizip) ( http://www.winimage.com/zLibDll/minizip.html ) + + Modifications of Unzip for Zip64 + Copyright (C) 2007-2008 Even Rouault + + Modifications for Zip64 support on both zip and unzip + Copyright (C) 2009-2010 Mathias Svensson ( http://result42.com ) + + For more info read MiniZip_info.txt + + --------------------------------------------------------------------------------- + + Condition of use and distribution are the same than zlib : + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. + + --------------------------------------------------------------------------------- + + Changes + + See header of unzip64.c + +*/ + +#ifndef _unz64_H +#define _unz64_H + +#ifdef __cplusplus +extern "C" { +#endif + +#ifndef _ZLIB_H +#include "zlib.h" +#endif + +#ifndef _ZLIBIOAPI_H +#include "ioapi.h" +#endif + +#ifdef HAVE_BZIP2 +#include "bzlib.h" +#endif + +#define Z_BZIP2ED 12 + +#if defined(STRICTUNZIP) || defined(STRICTZIPUNZIP) +/* like the STRICT of WIN32, we define a pointer that cannot be converted + from (void*) without cast */ +typedef struct TagunzFile__ { int unused; } unzFile__; +typedef unzFile__ *unzFile; +#else +typedef voidp unzFile; +#endif + + +#define UNZ_OK (0) +#define UNZ_END_OF_LIST_OF_FILE (-100) +#define UNZ_ERRNO (Z_ERRNO) +#define UNZ_EOF (0) +#define UNZ_PARAMERROR (-102) +#define UNZ_BADZIPFILE (-103) +#define UNZ_INTERNALERROR (-104) +#define UNZ_CRCERROR (-105) + +/* tm_unz contain date/time info */ +typedef struct tm_unz_s +{ + uInt tm_sec; /* seconds after the minute - [0,59] */ + uInt tm_min; /* minutes after the hour - [0,59] */ + uInt tm_hour; /* hours since midnight - [0,23] */ + uInt tm_mday; /* day of the month - [1,31] */ + uInt tm_mon; /* months since January - [0,11] */ + uInt tm_year; /* years - [1980..2044] */ +} tm_unz; + +/* unz_global_info structure contain global data about the ZIPfile + These data comes from the end of central dir */ +typedef struct unz_global_info64_s +{ + ZPOS64_T number_entry; /* total number of entries in + the central dir on this disk */ + uLong size_comment; /* size of the global comment of the zipfile */ +} unz_global_info64; + +typedef struct unz_global_info_s +{ + uLong number_entry; /* total number of entries in + the central dir on this disk */ + uLong size_comment; /* size of the global comment of the zipfile */ +} unz_global_info; + +/* unz_file_info contain information about a file in the zipfile */ +typedef struct unz_file_info64_s +{ + uLong version; /* version made by 2 bytes */ + uLong version_needed; /* version needed to extract 2 bytes */ + uLong flag; /* general purpose bit flag 2 bytes */ + uLong compression_method; /* compression method 2 bytes */ + uLong dosDate; /* last mod file date in Dos fmt 4 bytes */ + uLong crc; /* crc-32 4 bytes */ + ZPOS64_T compressed_size; /* compressed size 8 bytes */ + ZPOS64_T uncompressed_size; /* uncompressed size 8 bytes */ + uLong size_filename; /* filename length 2 bytes */ + uLong size_file_extra; /* extra field length 2 bytes */ + uLong size_file_comment; /* file comment length 2 bytes */ + + uLong disk_num_start; /* disk number start 2 bytes */ + uLong internal_fa; /* internal file attributes 2 bytes */ + uLong external_fa; /* external file attributes 4 bytes */ + + tm_unz tmu_date; +} unz_file_info64; + +typedef struct unz_file_info_s +{ + uLong version; /* version made by 2 bytes */ + uLong version_needed; /* version needed to extract 2 bytes */ + uLong flag; /* general purpose bit flag 2 bytes */ + uLong compression_method; /* compression method 2 bytes */ + uLong dosDate; /* last mod file date in Dos fmt 4 bytes */ + uLong crc; /* crc-32 4 bytes */ + uLong compressed_size; /* compressed size 4 bytes */ + uLong uncompressed_size; /* uncompressed size 4 bytes */ + uLong size_filename; /* filename length 2 bytes */ + uLong size_file_extra; /* extra field length 2 bytes */ + uLong size_file_comment; /* file comment length 2 bytes */ + + uLong disk_num_start; /* disk number start 2 bytes */ + uLong internal_fa; /* internal file attributes 2 bytes */ + uLong external_fa; /* external file attributes 4 bytes */ + + tm_unz tmu_date; +} unz_file_info; + +extern int ZEXPORT unzStringFileNameCompare OF ((const char* fileName1, + const char* fileName2, + int iCaseSensitivity)); +/* + Compare two filename (fileName1,fileName2). + If iCaseSenisivity = 1, comparision is case sensitivity (like strcmp) + If iCaseSenisivity = 2, comparision is not case sensitivity (like strcmpi + or strcasecmp) + If iCaseSenisivity = 0, case sensitivity is defaut of your operating system + (like 1 on Unix, 2 on Windows) +*/ + + +extern unzFile ZEXPORT unzOpen OF((const char *path)); +extern unzFile ZEXPORT unzOpen64 OF((const void *path)); +/* + Open a Zip file. path contain the full pathname (by example, + on a Windows XP computer "c:\\zlib\\zlib113.zip" or on an Unix computer + "zlib/zlib113.zip". + If the zipfile cannot be opened (file don't exist or in not valid), the + return value is NULL. + Else, the return value is a unzFile Handle, usable with other function + of this unzip package. + the "64" function take a const void* pointer, because the path is just the + value passed to the open64_file_func callback. + Under Windows, if UNICODE is defined, using fill_fopen64_filefunc, the path + is a pointer to a wide unicode string (LPCTSTR is LPCWSTR), so const char* + does not describe the reality +*/ + + +extern unzFile ZEXPORT unzOpen2 OF((const char *path, + zlib_filefunc_def* pzlib_filefunc_def)); +/* + Open a Zip file, like unzOpen, but provide a set of file low level API + for read/write the zip file (see ioapi.h) +*/ + +extern unzFile ZEXPORT unzOpen2_64 OF((const void *path, + zlib_filefunc64_def* pzlib_filefunc_def)); +/* + Open a Zip file, like unz64Open, but provide a set of file low level API + for read/write the zip file (see ioapi.h) +*/ + +extern int ZEXPORT unzClose OF((unzFile file)); +/* + Close a ZipFile opened with unzOpen. + If there is files inside the .Zip opened with unzOpenCurrentFile (see later), + these files MUST be closed with unzCloseCurrentFile before call unzClose. + return UNZ_OK if there is no problem. */ + +extern int ZEXPORT unzGetGlobalInfo OF((unzFile file, + unz_global_info *pglobal_info)); + +extern int ZEXPORT unzGetGlobalInfo64 OF((unzFile file, + unz_global_info64 *pglobal_info)); +/* + Write info about the ZipFile in the *pglobal_info structure. + No preparation of the structure is needed + return UNZ_OK if there is no problem. */ + + +extern int ZEXPORT unzGetGlobalComment OF((unzFile file, + char *szComment, + uLong uSizeBuf)); +/* + Get the global comment string of the ZipFile, in the szComment buffer. + uSizeBuf is the size of the szComment buffer. + return the number of byte copied or an error code <0 +*/ + + +/***************************************************************************/ +/* Unzip package allow you browse the directory of the zipfile */ + +extern int ZEXPORT unzGoToFirstFile OF((unzFile file)); +/* + Set the current file of the zipfile to the first file. + return UNZ_OK if there is no problem +*/ + +extern int ZEXPORT unzGoToNextFile OF((unzFile file)); +/* + Set the current file of the zipfile to the next file. + return UNZ_OK if there is no problem + return UNZ_END_OF_LIST_OF_FILE if the actual file was the latest. +*/ + +extern int ZEXPORT unzLocateFile OF((unzFile file, + const char *szFileName, + int iCaseSensitivity)); +/* + Try locate the file szFileName in the zipfile. + For the iCaseSensitivity signification, see unzStringFileNameCompare + + return value : + UNZ_OK if the file is found. It becomes the current file. + UNZ_END_OF_LIST_OF_FILE if the file is not found +*/ + + +/* ****************************************** */ +/* Ryan supplied functions */ +/* unz_file_info contain information about a file in the zipfile */ +typedef struct unz_file_pos_s +{ + uLong pos_in_zip_directory; /* offset in zip file directory */ + uLong num_of_file; /* # of file */ +} unz_file_pos; + +extern int ZEXPORT unzGetFilePos( + unzFile file, + unz_file_pos* file_pos); + +extern int ZEXPORT unzGoToFilePos( + unzFile file, + unz_file_pos* file_pos); + +typedef struct unz64_file_pos_s +{ + ZPOS64_T pos_in_zip_directory; /* offset in zip file directory */ + ZPOS64_T num_of_file; /* # of file */ +} unz64_file_pos; + +extern int ZEXPORT unzGetFilePos64( + unzFile file, + unz64_file_pos* file_pos); + +extern int ZEXPORT unzGoToFilePos64( + unzFile file, + const unz64_file_pos* file_pos); + +/* ****************************************** */ + +extern int ZEXPORT unzGetCurrentFileInfo64 OF((unzFile file, + unz_file_info64 *pfile_info, + char *szFileName, + uLong fileNameBufferSize, + void *extraField, + uLong extraFieldBufferSize, + char *szComment, + uLong commentBufferSize)); + +extern int ZEXPORT unzGetCurrentFileInfo OF((unzFile file, + unz_file_info *pfile_info, + char *szFileName, + uLong fileNameBufferSize, + void *extraField, + uLong extraFieldBufferSize, + char *szComment, + uLong commentBufferSize)); +/* + Get Info about the current file + if pfile_info!=NULL, the *pfile_info structure will contain somes info about + the current file + if szFileName!=NULL, the filemane string will be copied in szFileName + (fileNameBufferSize is the size of the buffer) + if extraField!=NULL, the extra field information will be copied in extraField + (extraFieldBufferSize is the size of the buffer). + This is the Central-header version of the extra field + if szComment!=NULL, the comment string of the file will be copied in szComment + (commentBufferSize is the size of the buffer) +*/ + + +/** Addition for GDAL : START */ + +extern ZPOS64_T ZEXPORT unzGetCurrentFileZStreamPos64 OF((unzFile file)); + +/** Addition for GDAL : END */ + + +/***************************************************************************/ +/* for reading the content of the current zipfile, you can open it, read data + from it, and close it (you can close it before reading all the file) + */ + +extern int ZEXPORT unzOpenCurrentFile OF((unzFile file)); +/* + Open for reading data the current file in the zipfile. + If there is no error, the return value is UNZ_OK. +*/ + +extern int ZEXPORT unzOpenCurrentFilePassword OF((unzFile file, + const char* password)); +/* + Open for reading data the current file in the zipfile. + password is a crypting password + If there is no error, the return value is UNZ_OK. +*/ + +extern int ZEXPORT unzOpenCurrentFile2 OF((unzFile file, + int* method, + int* level, + int raw)); +/* + Same than unzOpenCurrentFile, but open for read raw the file (not uncompress) + if raw==1 + *method will receive method of compression, *level will receive level of + compression + note : you can set level parameter as NULL (if you did not want known level, + but you CANNOT set method parameter as NULL +*/ + +extern int ZEXPORT unzOpenCurrentFile3 OF((unzFile file, + int* method, + int* level, + int raw, + const char* password)); +/* + Same than unzOpenCurrentFile, but open for read raw the file (not uncompress) + if raw==1 + *method will receive method of compression, *level will receive level of + compression + note : you can set level parameter as NULL (if you did not want known level, + but you CANNOT set method parameter as NULL +*/ + + +extern int ZEXPORT unzCloseCurrentFile OF((unzFile file)); +/* + Close the file in zip opened with unzOpenCurrentFile + Return UNZ_CRCERROR if all the file was read but the CRC is not good +*/ + +extern int ZEXPORT unzReadCurrentFile OF((unzFile file, + voidp buf, + unsigned len)); +/* + Read bytes from the current file (opened by unzOpenCurrentFile) + buf contain buffer where data must be copied + len the size of buf. + + return the number of byte copied if somes bytes are copied + return 0 if the end of file was reached + return <0 with error code if there is an error + (UNZ_ERRNO for IO error, or zLib error for uncompress error) +*/ + +extern z_off_t ZEXPORT unztell OF((unzFile file)); + +extern ZPOS64_T ZEXPORT unztell64 OF((unzFile file)); +/* + Give the current position in uncompressed data +*/ + +extern int ZEXPORT unzeof OF((unzFile file)); +/* + return 1 if the end of file was reached, 0 elsewhere +*/ + +extern int ZEXPORT unzGetLocalExtrafield OF((unzFile file, + voidp buf, + unsigned len)); +/* + Read extra field from the current file (opened by unzOpenCurrentFile) + This is the local-header version of the extra field (sometimes, there is + more info in the local-header version than in the central-header) + + if buf==NULL, it return the size of the local extra field + + if buf!=NULL, len is the size of the buffer, the extra header is copied in + buf. + the return value is the number of bytes copied in buf, or (if <0) + the error code +*/ + +/***************************************************************************/ + +/* Get the current file offset */ +extern ZPOS64_T ZEXPORT unzGetOffset64 (unzFile file); +extern uLong ZEXPORT unzGetOffset (unzFile file); + +/* Set the current file offset */ +extern int ZEXPORT unzSetOffset64 (unzFile file, ZPOS64_T pos); +extern int ZEXPORT unzSetOffset (unzFile file, uLong pos); + + + +#ifdef __cplusplus +} +#endif + +#endif /* _unz64_H */ diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/minizip/zip.c b/software/scsi2sd-util/zlib-1.2.8/contrib/minizip/zip.c new file mode 100644 index 0000000..ea54853 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/minizip/zip.c @@ -0,0 +1,2007 @@ +/* zip.c -- IO on .zip files using zlib + Version 1.1, February 14h, 2010 + part of the MiniZip project - ( http://www.winimage.com/zLibDll/minizip.html ) + + Copyright (C) 1998-2010 Gilles Vollant (minizip) ( http://www.winimage.com/zLibDll/minizip.html ) + + Modifications for Zip64 support + Copyright (C) 2009-2010 Mathias Svensson ( http://result42.com ) + + For more info read MiniZip_info.txt + + Changes + Oct-2009 - Mathias Svensson - Remove old C style function prototypes + Oct-2009 - Mathias Svensson - Added Zip64 Support when creating new file archives + Oct-2009 - Mathias Svensson - Did some code cleanup and refactoring to get better overview of some functions. + Oct-2009 - Mathias Svensson - Added zipRemoveExtraInfoBlock to strip extra field data from its ZIP64 data + It is used when recreting zip archive with RAW when deleting items from a zip. + ZIP64 data is automaticly added to items that needs it, and existing ZIP64 data need to be removed. + Oct-2009 - Mathias Svensson - Added support for BZIP2 as compression mode (bzip2 lib is required) + Jan-2010 - back to unzip and minizip 1.0 name scheme, with compatibility layer + +*/ + + +#include +#include +#include +#include +#include "zlib.h" +#include "zip.h" + +#ifdef STDC +# include +# include +# include +#endif +#ifdef NO_ERRNO_H + extern int errno; +#else +# include +#endif + + +#ifndef local +# define local static +#endif +/* compile with -Dlocal if your debugger can't find static symbols */ + +#ifndef VERSIONMADEBY +# define VERSIONMADEBY (0x0) /* platform depedent */ +#endif + +#ifndef Z_BUFSIZE +#define Z_BUFSIZE (64*1024) //(16384) +#endif + +#ifndef Z_MAXFILENAMEINZIP +#define Z_MAXFILENAMEINZIP (256) +#endif + +#ifndef ALLOC +# define ALLOC(size) (malloc(size)) +#endif +#ifndef TRYFREE +# define TRYFREE(p) {if (p) free(p);} +#endif + +/* +#define SIZECENTRALDIRITEM (0x2e) +#define SIZEZIPLOCALHEADER (0x1e) +*/ + +/* I've found an old Unix (a SunOS 4.1.3_U1) without all SEEK_* defined.... */ + + +// NOT sure that this work on ALL platform +#define MAKEULONG64(a, b) ((ZPOS64_T)(((unsigned long)(a)) | ((ZPOS64_T)((unsigned long)(b))) << 32)) + +#ifndef SEEK_CUR +#define SEEK_CUR 1 +#endif + +#ifndef SEEK_END +#define SEEK_END 2 +#endif + +#ifndef SEEK_SET +#define SEEK_SET 0 +#endif + +#ifndef DEF_MEM_LEVEL +#if MAX_MEM_LEVEL >= 8 +# define DEF_MEM_LEVEL 8 +#else +# define DEF_MEM_LEVEL MAX_MEM_LEVEL +#endif +#endif +const char zip_copyright[] =" zip 1.01 Copyright 1998-2004 Gilles Vollant - http://www.winimage.com/zLibDll"; + + +#define SIZEDATA_INDATABLOCK (4096-(4*4)) + +#define LOCALHEADERMAGIC (0x04034b50) +#define CENTRALHEADERMAGIC (0x02014b50) +#define ENDHEADERMAGIC (0x06054b50) +#define ZIP64ENDHEADERMAGIC (0x6064b50) +#define ZIP64ENDLOCHEADERMAGIC (0x7064b50) + +#define FLAG_LOCALHEADER_OFFSET (0x06) +#define CRC_LOCALHEADER_OFFSET (0x0e) + +#define SIZECENTRALHEADER (0x2e) /* 46 */ + +typedef struct linkedlist_datablock_internal_s +{ + struct linkedlist_datablock_internal_s* next_datablock; + uLong avail_in_this_block; + uLong filled_in_this_block; + uLong unused; /* for future use and alignement */ + unsigned char data[SIZEDATA_INDATABLOCK]; +} linkedlist_datablock_internal; + +typedef struct linkedlist_data_s +{ + linkedlist_datablock_internal* first_block; + linkedlist_datablock_internal* last_block; +} linkedlist_data; + + +typedef struct +{ + z_stream stream; /* zLib stream structure for inflate */ +#ifdef HAVE_BZIP2 + bz_stream bstream; /* bzLib stream structure for bziped */ +#endif + + int stream_initialised; /* 1 is stream is initialised */ + uInt pos_in_buffered_data; /* last written byte in buffered_data */ + + ZPOS64_T pos_local_header; /* offset of the local header of the file + currenty writing */ + char* central_header; /* central header data for the current file */ + uLong size_centralExtra; + uLong size_centralheader; /* size of the central header for cur file */ + uLong size_centralExtraFree; /* Extra bytes allocated to the centralheader but that are not used */ + uLong flag; /* flag of the file currently writing */ + + int method; /* compression method of file currenty wr.*/ + int raw; /* 1 for directly writing raw data */ + Byte buffered_data[Z_BUFSIZE];/* buffer contain compressed data to be writ*/ + uLong dosDate; + uLong crc32; + int encrypt; + int zip64; /* Add ZIP64 extened information in the extra field */ + ZPOS64_T pos_zip64extrainfo; + ZPOS64_T totalCompressedData; + ZPOS64_T totalUncompressedData; +#ifndef NOCRYPT + unsigned long keys[3]; /* keys defining the pseudo-random sequence */ + const z_crc_t* pcrc_32_tab; + int crypt_header_size; +#endif +} curfile64_info; + +typedef struct +{ + zlib_filefunc64_32_def z_filefunc; + voidpf filestream; /* io structore of the zipfile */ + linkedlist_data central_dir;/* datablock with central dir in construction*/ + int in_opened_file_inzip; /* 1 if a file in the zip is currently writ.*/ + curfile64_info ci; /* info on the file curretly writing */ + + ZPOS64_T begin_pos; /* position of the beginning of the zipfile */ + ZPOS64_T add_position_when_writting_offset; + ZPOS64_T number_entry; + +#ifndef NO_ADDFILEINEXISTINGZIP + char *globalcomment; +#endif + +} zip64_internal; + + +#ifndef NOCRYPT +#define INCLUDECRYPTINGCODE_IFCRYPTALLOWED +#include "crypt.h" +#endif + +local linkedlist_datablock_internal* allocate_new_datablock() +{ + linkedlist_datablock_internal* ldi; + ldi = (linkedlist_datablock_internal*) + ALLOC(sizeof(linkedlist_datablock_internal)); + if (ldi!=NULL) + { + ldi->next_datablock = NULL ; + ldi->filled_in_this_block = 0 ; + ldi->avail_in_this_block = SIZEDATA_INDATABLOCK ; + } + return ldi; +} + +local void free_datablock(linkedlist_datablock_internal* ldi) +{ + while (ldi!=NULL) + { + linkedlist_datablock_internal* ldinext = ldi->next_datablock; + TRYFREE(ldi); + ldi = ldinext; + } +} + +local void init_linkedlist(linkedlist_data* ll) +{ + ll->first_block = ll->last_block = NULL; +} + +local void free_linkedlist(linkedlist_data* ll) +{ + free_datablock(ll->first_block); + ll->first_block = ll->last_block = NULL; +} + + +local int add_data_in_datablock(linkedlist_data* ll, const void* buf, uLong len) +{ + linkedlist_datablock_internal* ldi; + const unsigned char* from_copy; + + if (ll==NULL) + return ZIP_INTERNALERROR; + + if (ll->last_block == NULL) + { + ll->first_block = ll->last_block = allocate_new_datablock(); + if (ll->first_block == NULL) + return ZIP_INTERNALERROR; + } + + ldi = ll->last_block; + from_copy = (unsigned char*)buf; + + while (len>0) + { + uInt copy_this; + uInt i; + unsigned char* to_copy; + + if (ldi->avail_in_this_block==0) + { + ldi->next_datablock = allocate_new_datablock(); + if (ldi->next_datablock == NULL) + return ZIP_INTERNALERROR; + ldi = ldi->next_datablock ; + ll->last_block = ldi; + } + + if (ldi->avail_in_this_block < len) + copy_this = (uInt)ldi->avail_in_this_block; + else + copy_this = (uInt)len; + + to_copy = &(ldi->data[ldi->filled_in_this_block]); + + for (i=0;ifilled_in_this_block += copy_this; + ldi->avail_in_this_block -= copy_this; + from_copy += copy_this ; + len -= copy_this; + } + return ZIP_OK; +} + + + +/****************************************************************************/ + +#ifndef NO_ADDFILEINEXISTINGZIP +/* =========================================================================== + Inputs a long in LSB order to the given file + nbByte == 1, 2 ,4 or 8 (byte, short or long, ZPOS64_T) +*/ + +local int zip64local_putValue OF((const zlib_filefunc64_32_def* pzlib_filefunc_def, voidpf filestream, ZPOS64_T x, int nbByte)); +local int zip64local_putValue (const zlib_filefunc64_32_def* pzlib_filefunc_def, voidpf filestream, ZPOS64_T x, int nbByte) +{ + unsigned char buf[8]; + int n; + for (n = 0; n < nbByte; n++) + { + buf[n] = (unsigned char)(x & 0xff); + x >>= 8; + } + if (x != 0) + { /* data overflow - hack for ZIP64 (X Roche) */ + for (n = 0; n < nbByte; n++) + { + buf[n] = 0xff; + } + } + + if (ZWRITE64(*pzlib_filefunc_def,filestream,buf,nbByte)!=(uLong)nbByte) + return ZIP_ERRNO; + else + return ZIP_OK; +} + +local void zip64local_putValue_inmemory OF((void* dest, ZPOS64_T x, int nbByte)); +local void zip64local_putValue_inmemory (void* dest, ZPOS64_T x, int nbByte) +{ + unsigned char* buf=(unsigned char*)dest; + int n; + for (n = 0; n < nbByte; n++) { + buf[n] = (unsigned char)(x & 0xff); + x >>= 8; + } + + if (x != 0) + { /* data overflow - hack for ZIP64 */ + for (n = 0; n < nbByte; n++) + { + buf[n] = 0xff; + } + } +} + +/****************************************************************************/ + + +local uLong zip64local_TmzDateToDosDate(const tm_zip* ptm) +{ + uLong year = (uLong)ptm->tm_year; + if (year>=1980) + year-=1980; + else if (year>=80) + year-=80; + return + (uLong) (((ptm->tm_mday) + (32 * (ptm->tm_mon+1)) + (512 * year)) << 16) | + ((ptm->tm_sec/2) + (32* ptm->tm_min) + (2048 * (uLong)ptm->tm_hour)); +} + + +/****************************************************************************/ + +local int zip64local_getByte OF((const zlib_filefunc64_32_def* pzlib_filefunc_def, voidpf filestream, int *pi)); + +local int zip64local_getByte(const zlib_filefunc64_32_def* pzlib_filefunc_def,voidpf filestream,int* pi) +{ + unsigned char c; + int err = (int)ZREAD64(*pzlib_filefunc_def,filestream,&c,1); + if (err==1) + { + *pi = (int)c; + return ZIP_OK; + } + else + { + if (ZERROR64(*pzlib_filefunc_def,filestream)) + return ZIP_ERRNO; + else + return ZIP_EOF; + } +} + + +/* =========================================================================== + Reads a long in LSB order from the given gz_stream. Sets +*/ +local int zip64local_getShort OF((const zlib_filefunc64_32_def* pzlib_filefunc_def, voidpf filestream, uLong *pX)); + +local int zip64local_getShort (const zlib_filefunc64_32_def* pzlib_filefunc_def, voidpf filestream, uLong* pX) +{ + uLong x ; + int i = 0; + int err; + + err = zip64local_getByte(pzlib_filefunc_def,filestream,&i); + x = (uLong)i; + + if (err==ZIP_OK) + err = zip64local_getByte(pzlib_filefunc_def,filestream,&i); + x += ((uLong)i)<<8; + + if (err==ZIP_OK) + *pX = x; + else + *pX = 0; + return err; +} + +local int zip64local_getLong OF((const zlib_filefunc64_32_def* pzlib_filefunc_def, voidpf filestream, uLong *pX)); + +local int zip64local_getLong (const zlib_filefunc64_32_def* pzlib_filefunc_def, voidpf filestream, uLong* pX) +{ + uLong x ; + int i = 0; + int err; + + err = zip64local_getByte(pzlib_filefunc_def,filestream,&i); + x = (uLong)i; + + if (err==ZIP_OK) + err = zip64local_getByte(pzlib_filefunc_def,filestream,&i); + x += ((uLong)i)<<8; + + if (err==ZIP_OK) + err = zip64local_getByte(pzlib_filefunc_def,filestream,&i); + x += ((uLong)i)<<16; + + if (err==ZIP_OK) + err = zip64local_getByte(pzlib_filefunc_def,filestream,&i); + x += ((uLong)i)<<24; + + if (err==ZIP_OK) + *pX = x; + else + *pX = 0; + return err; +} + +local int zip64local_getLong64 OF((const zlib_filefunc64_32_def* pzlib_filefunc_def, voidpf filestream, ZPOS64_T *pX)); + + +local int zip64local_getLong64 (const zlib_filefunc64_32_def* pzlib_filefunc_def, voidpf filestream, ZPOS64_T *pX) +{ + ZPOS64_T x; + int i = 0; + int err; + + err = zip64local_getByte(pzlib_filefunc_def,filestream,&i); + x = (ZPOS64_T)i; + + if (err==ZIP_OK) + err = zip64local_getByte(pzlib_filefunc_def,filestream,&i); + x += ((ZPOS64_T)i)<<8; + + if (err==ZIP_OK) + err = zip64local_getByte(pzlib_filefunc_def,filestream,&i); + x += ((ZPOS64_T)i)<<16; + + if (err==ZIP_OK) + err = zip64local_getByte(pzlib_filefunc_def,filestream,&i); + x += ((ZPOS64_T)i)<<24; + + if (err==ZIP_OK) + err = zip64local_getByte(pzlib_filefunc_def,filestream,&i); + x += ((ZPOS64_T)i)<<32; + + if (err==ZIP_OK) + err = zip64local_getByte(pzlib_filefunc_def,filestream,&i); + x += ((ZPOS64_T)i)<<40; + + if (err==ZIP_OK) + err = zip64local_getByte(pzlib_filefunc_def,filestream,&i); + x += ((ZPOS64_T)i)<<48; + + if (err==ZIP_OK) + err = zip64local_getByte(pzlib_filefunc_def,filestream,&i); + x += ((ZPOS64_T)i)<<56; + + if (err==ZIP_OK) + *pX = x; + else + *pX = 0; + + return err; +} + +#ifndef BUFREADCOMMENT +#define BUFREADCOMMENT (0x400) +#endif +/* + Locate the Central directory of a zipfile (at the end, just before + the global comment) +*/ +local ZPOS64_T zip64local_SearchCentralDir OF((const zlib_filefunc64_32_def* pzlib_filefunc_def, voidpf filestream)); + +local ZPOS64_T zip64local_SearchCentralDir(const zlib_filefunc64_32_def* pzlib_filefunc_def, voidpf filestream) +{ + unsigned char* buf; + ZPOS64_T uSizeFile; + ZPOS64_T uBackRead; + ZPOS64_T uMaxBack=0xffff; /* maximum size of global comment */ + ZPOS64_T uPosFound=0; + + if (ZSEEK64(*pzlib_filefunc_def,filestream,0,ZLIB_FILEFUNC_SEEK_END) != 0) + return 0; + + + uSizeFile = ZTELL64(*pzlib_filefunc_def,filestream); + + if (uMaxBack>uSizeFile) + uMaxBack = uSizeFile; + + buf = (unsigned char*)ALLOC(BUFREADCOMMENT+4); + if (buf==NULL) + return 0; + + uBackRead = 4; + while (uBackReaduMaxBack) + uBackRead = uMaxBack; + else + uBackRead+=BUFREADCOMMENT; + uReadPos = uSizeFile-uBackRead ; + + uReadSize = ((BUFREADCOMMENT+4) < (uSizeFile-uReadPos)) ? + (BUFREADCOMMENT+4) : (uLong)(uSizeFile-uReadPos); + if (ZSEEK64(*pzlib_filefunc_def,filestream,uReadPos,ZLIB_FILEFUNC_SEEK_SET)!=0) + break; + + if (ZREAD64(*pzlib_filefunc_def,filestream,buf,uReadSize)!=uReadSize) + break; + + for (i=(int)uReadSize-3; (i--)>0;) + if (((*(buf+i))==0x50) && ((*(buf+i+1))==0x4b) && + ((*(buf+i+2))==0x05) && ((*(buf+i+3))==0x06)) + { + uPosFound = uReadPos+i; + break; + } + + if (uPosFound!=0) + break; + } + TRYFREE(buf); + return uPosFound; +} + +/* +Locate the End of Zip64 Central directory locator and from there find the CD of a zipfile (at the end, just before +the global comment) +*/ +local ZPOS64_T zip64local_SearchCentralDir64 OF((const zlib_filefunc64_32_def* pzlib_filefunc_def, voidpf filestream)); + +local ZPOS64_T zip64local_SearchCentralDir64(const zlib_filefunc64_32_def* pzlib_filefunc_def, voidpf filestream) +{ + unsigned char* buf; + ZPOS64_T uSizeFile; + ZPOS64_T uBackRead; + ZPOS64_T uMaxBack=0xffff; /* maximum size of global comment */ + ZPOS64_T uPosFound=0; + uLong uL; + ZPOS64_T relativeOffset; + + if (ZSEEK64(*pzlib_filefunc_def,filestream,0,ZLIB_FILEFUNC_SEEK_END) != 0) + return 0; + + uSizeFile = ZTELL64(*pzlib_filefunc_def,filestream); + + if (uMaxBack>uSizeFile) + uMaxBack = uSizeFile; + + buf = (unsigned char*)ALLOC(BUFREADCOMMENT+4); + if (buf==NULL) + return 0; + + uBackRead = 4; + while (uBackReaduMaxBack) + uBackRead = uMaxBack; + else + uBackRead+=BUFREADCOMMENT; + uReadPos = uSizeFile-uBackRead ; + + uReadSize = ((BUFREADCOMMENT+4) < (uSizeFile-uReadPos)) ? + (BUFREADCOMMENT+4) : (uLong)(uSizeFile-uReadPos); + if (ZSEEK64(*pzlib_filefunc_def,filestream,uReadPos,ZLIB_FILEFUNC_SEEK_SET)!=0) + break; + + if (ZREAD64(*pzlib_filefunc_def,filestream,buf,uReadSize)!=uReadSize) + break; + + for (i=(int)uReadSize-3; (i--)>0;) + { + // Signature "0x07064b50" Zip64 end of central directory locater + if (((*(buf+i))==0x50) && ((*(buf+i+1))==0x4b) && ((*(buf+i+2))==0x06) && ((*(buf+i+3))==0x07)) + { + uPosFound = uReadPos+i; + break; + } + } + + if (uPosFound!=0) + break; + } + + TRYFREE(buf); + if (uPosFound == 0) + return 0; + + /* Zip64 end of central directory locator */ + if (ZSEEK64(*pzlib_filefunc_def,filestream, uPosFound,ZLIB_FILEFUNC_SEEK_SET)!=0) + return 0; + + /* the signature, already checked */ + if (zip64local_getLong(pzlib_filefunc_def,filestream,&uL)!=ZIP_OK) + return 0; + + /* number of the disk with the start of the zip64 end of central directory */ + if (zip64local_getLong(pzlib_filefunc_def,filestream,&uL)!=ZIP_OK) + return 0; + if (uL != 0) + return 0; + + /* relative offset of the zip64 end of central directory record */ + if (zip64local_getLong64(pzlib_filefunc_def,filestream,&relativeOffset)!=ZIP_OK) + return 0; + + /* total number of disks */ + if (zip64local_getLong(pzlib_filefunc_def,filestream,&uL)!=ZIP_OK) + return 0; + if (uL != 1) + return 0; + + /* Goto Zip64 end of central directory record */ + if (ZSEEK64(*pzlib_filefunc_def,filestream, relativeOffset,ZLIB_FILEFUNC_SEEK_SET)!=0) + return 0; + + /* the signature */ + if (zip64local_getLong(pzlib_filefunc_def,filestream,&uL)!=ZIP_OK) + return 0; + + if (uL != 0x06064b50) // signature of 'Zip64 end of central directory' + return 0; + + return relativeOffset; +} + +int LoadCentralDirectoryRecord(zip64_internal* pziinit) +{ + int err=ZIP_OK; + ZPOS64_T byte_before_the_zipfile;/* byte before the zipfile, (>0 for sfx)*/ + + ZPOS64_T size_central_dir; /* size of the central directory */ + ZPOS64_T offset_central_dir; /* offset of start of central directory */ + ZPOS64_T central_pos; + uLong uL; + + uLong number_disk; /* number of the current dist, used for + spaning ZIP, unsupported, always 0*/ + uLong number_disk_with_CD; /* number the the disk with central dir, used + for spaning ZIP, unsupported, always 0*/ + ZPOS64_T number_entry; + ZPOS64_T number_entry_CD; /* total number of entries in + the central dir + (same than number_entry on nospan) */ + uLong VersionMadeBy; + uLong VersionNeeded; + uLong size_comment; + + int hasZIP64Record = 0; + + // check first if we find a ZIP64 record + central_pos = zip64local_SearchCentralDir64(&pziinit->z_filefunc,pziinit->filestream); + if(central_pos > 0) + { + hasZIP64Record = 1; + } + else if(central_pos == 0) + { + central_pos = zip64local_SearchCentralDir(&pziinit->z_filefunc,pziinit->filestream); + } + +/* disable to allow appending to empty ZIP archive + if (central_pos==0) + err=ZIP_ERRNO; +*/ + + if(hasZIP64Record) + { + ZPOS64_T sizeEndOfCentralDirectory; + if (ZSEEK64(pziinit->z_filefunc, pziinit->filestream, central_pos, ZLIB_FILEFUNC_SEEK_SET) != 0) + err=ZIP_ERRNO; + + /* the signature, already checked */ + if (zip64local_getLong(&pziinit->z_filefunc, pziinit->filestream,&uL)!=ZIP_OK) + err=ZIP_ERRNO; + + /* size of zip64 end of central directory record */ + if (zip64local_getLong64(&pziinit->z_filefunc, pziinit->filestream, &sizeEndOfCentralDirectory)!=ZIP_OK) + err=ZIP_ERRNO; + + /* version made by */ + if (zip64local_getShort(&pziinit->z_filefunc, pziinit->filestream, &VersionMadeBy)!=ZIP_OK) + err=ZIP_ERRNO; + + /* version needed to extract */ + if (zip64local_getShort(&pziinit->z_filefunc, pziinit->filestream, &VersionNeeded)!=ZIP_OK) + err=ZIP_ERRNO; + + /* number of this disk */ + if (zip64local_getLong(&pziinit->z_filefunc, pziinit->filestream,&number_disk)!=ZIP_OK) + err=ZIP_ERRNO; + + /* number of the disk with the start of the central directory */ + if (zip64local_getLong(&pziinit->z_filefunc, pziinit->filestream,&number_disk_with_CD)!=ZIP_OK) + err=ZIP_ERRNO; + + /* total number of entries in the central directory on this disk */ + if (zip64local_getLong64(&pziinit->z_filefunc, pziinit->filestream, &number_entry)!=ZIP_OK) + err=ZIP_ERRNO; + + /* total number of entries in the central directory */ + if (zip64local_getLong64(&pziinit->z_filefunc, pziinit->filestream,&number_entry_CD)!=ZIP_OK) + err=ZIP_ERRNO; + + if ((number_entry_CD!=number_entry) || (number_disk_with_CD!=0) || (number_disk!=0)) + err=ZIP_BADZIPFILE; + + /* size of the central directory */ + if (zip64local_getLong64(&pziinit->z_filefunc, pziinit->filestream,&size_central_dir)!=ZIP_OK) + err=ZIP_ERRNO; + + /* offset of start of central directory with respect to the + starting disk number */ + if (zip64local_getLong64(&pziinit->z_filefunc, pziinit->filestream,&offset_central_dir)!=ZIP_OK) + err=ZIP_ERRNO; + + // TODO.. + // read the comment from the standard central header. + size_comment = 0; + } + else + { + // Read End of central Directory info + if (ZSEEK64(pziinit->z_filefunc, pziinit->filestream, central_pos,ZLIB_FILEFUNC_SEEK_SET)!=0) + err=ZIP_ERRNO; + + /* the signature, already checked */ + if (zip64local_getLong(&pziinit->z_filefunc, pziinit->filestream,&uL)!=ZIP_OK) + err=ZIP_ERRNO; + + /* number of this disk */ + if (zip64local_getShort(&pziinit->z_filefunc, pziinit->filestream,&number_disk)!=ZIP_OK) + err=ZIP_ERRNO; + + /* number of the disk with the start of the central directory */ + if (zip64local_getShort(&pziinit->z_filefunc, pziinit->filestream,&number_disk_with_CD)!=ZIP_OK) + err=ZIP_ERRNO; + + /* total number of entries in the central dir on this disk */ + number_entry = 0; + if (zip64local_getShort(&pziinit->z_filefunc, pziinit->filestream, &uL)!=ZIP_OK) + err=ZIP_ERRNO; + else + number_entry = uL; + + /* total number of entries in the central dir */ + number_entry_CD = 0; + if (zip64local_getShort(&pziinit->z_filefunc, pziinit->filestream, &uL)!=ZIP_OK) + err=ZIP_ERRNO; + else + number_entry_CD = uL; + + if ((number_entry_CD!=number_entry) || (number_disk_with_CD!=0) || (number_disk!=0)) + err=ZIP_BADZIPFILE; + + /* size of the central directory */ + size_central_dir = 0; + if (zip64local_getLong(&pziinit->z_filefunc, pziinit->filestream, &uL)!=ZIP_OK) + err=ZIP_ERRNO; + else + size_central_dir = uL; + + /* offset of start of central directory with respect to the starting disk number */ + offset_central_dir = 0; + if (zip64local_getLong(&pziinit->z_filefunc, pziinit->filestream, &uL)!=ZIP_OK) + err=ZIP_ERRNO; + else + offset_central_dir = uL; + + + /* zipfile global comment length */ + if (zip64local_getShort(&pziinit->z_filefunc, pziinit->filestream, &size_comment)!=ZIP_OK) + err=ZIP_ERRNO; + } + + if ((central_posz_filefunc, pziinit->filestream); + return ZIP_ERRNO; + } + + if (size_comment>0) + { + pziinit->globalcomment = (char*)ALLOC(size_comment+1); + if (pziinit->globalcomment) + { + size_comment = ZREAD64(pziinit->z_filefunc, pziinit->filestream, pziinit->globalcomment,size_comment); + pziinit->globalcomment[size_comment]=0; + } + } + + byte_before_the_zipfile = central_pos - (offset_central_dir+size_central_dir); + pziinit->add_position_when_writting_offset = byte_before_the_zipfile; + + { + ZPOS64_T size_central_dir_to_read = size_central_dir; + size_t buf_size = SIZEDATA_INDATABLOCK; + void* buf_read = (void*)ALLOC(buf_size); + if (ZSEEK64(pziinit->z_filefunc, pziinit->filestream, offset_central_dir + byte_before_the_zipfile, ZLIB_FILEFUNC_SEEK_SET) != 0) + err=ZIP_ERRNO; + + while ((size_central_dir_to_read>0) && (err==ZIP_OK)) + { + ZPOS64_T read_this = SIZEDATA_INDATABLOCK; + if (read_this > size_central_dir_to_read) + read_this = size_central_dir_to_read; + + if (ZREAD64(pziinit->z_filefunc, pziinit->filestream,buf_read,(uLong)read_this) != read_this) + err=ZIP_ERRNO; + + if (err==ZIP_OK) + err = add_data_in_datablock(&pziinit->central_dir,buf_read, (uLong)read_this); + + size_central_dir_to_read-=read_this; + } + TRYFREE(buf_read); + } + pziinit->begin_pos = byte_before_the_zipfile; + pziinit->number_entry = number_entry_CD; + + if (ZSEEK64(pziinit->z_filefunc, pziinit->filestream, offset_central_dir+byte_before_the_zipfile,ZLIB_FILEFUNC_SEEK_SET) != 0) + err=ZIP_ERRNO; + + return err; +} + + +#endif /* !NO_ADDFILEINEXISTINGZIP*/ + + +/************************************************************/ +extern zipFile ZEXPORT zipOpen3 (const void *pathname, int append, zipcharpc* globalcomment, zlib_filefunc64_32_def* pzlib_filefunc64_32_def) +{ + zip64_internal ziinit; + zip64_internal* zi; + int err=ZIP_OK; + + ziinit.z_filefunc.zseek32_file = NULL; + ziinit.z_filefunc.ztell32_file = NULL; + if (pzlib_filefunc64_32_def==NULL) + fill_fopen64_filefunc(&ziinit.z_filefunc.zfile_func64); + else + ziinit.z_filefunc = *pzlib_filefunc64_32_def; + + ziinit.filestream = ZOPEN64(ziinit.z_filefunc, + pathname, + (append == APPEND_STATUS_CREATE) ? + (ZLIB_FILEFUNC_MODE_READ | ZLIB_FILEFUNC_MODE_WRITE | ZLIB_FILEFUNC_MODE_CREATE) : + (ZLIB_FILEFUNC_MODE_READ | ZLIB_FILEFUNC_MODE_WRITE | ZLIB_FILEFUNC_MODE_EXISTING)); + + if (ziinit.filestream == NULL) + return NULL; + + if (append == APPEND_STATUS_CREATEAFTER) + ZSEEK64(ziinit.z_filefunc,ziinit.filestream,0,SEEK_END); + + ziinit.begin_pos = ZTELL64(ziinit.z_filefunc,ziinit.filestream); + ziinit.in_opened_file_inzip = 0; + ziinit.ci.stream_initialised = 0; + ziinit.number_entry = 0; + ziinit.add_position_when_writting_offset = 0; + init_linkedlist(&(ziinit.central_dir)); + + + + zi = (zip64_internal*)ALLOC(sizeof(zip64_internal)); + if (zi==NULL) + { + ZCLOSE64(ziinit.z_filefunc,ziinit.filestream); + return NULL; + } + + /* now we add file in a zipfile */ +# ifndef NO_ADDFILEINEXISTINGZIP + ziinit.globalcomment = NULL; + if (append == APPEND_STATUS_ADDINZIP) + { + // Read and Cache Central Directory Records + err = LoadCentralDirectoryRecord(&ziinit); + } + + if (globalcomment) + { + *globalcomment = ziinit.globalcomment; + } +# endif /* !NO_ADDFILEINEXISTINGZIP*/ + + if (err != ZIP_OK) + { +# ifndef NO_ADDFILEINEXISTINGZIP + TRYFREE(ziinit.globalcomment); +# endif /* !NO_ADDFILEINEXISTINGZIP*/ + TRYFREE(zi); + return NULL; + } + else + { + *zi = ziinit; + return (zipFile)zi; + } +} + +extern zipFile ZEXPORT zipOpen2 (const char *pathname, int append, zipcharpc* globalcomment, zlib_filefunc_def* pzlib_filefunc32_def) +{ + if (pzlib_filefunc32_def != NULL) + { + zlib_filefunc64_32_def zlib_filefunc64_32_def_fill; + fill_zlib_filefunc64_32_def_from_filefunc32(&zlib_filefunc64_32_def_fill,pzlib_filefunc32_def); + return zipOpen3(pathname, append, globalcomment, &zlib_filefunc64_32_def_fill); + } + else + return zipOpen3(pathname, append, globalcomment, NULL); +} + +extern zipFile ZEXPORT zipOpen2_64 (const void *pathname, int append, zipcharpc* globalcomment, zlib_filefunc64_def* pzlib_filefunc_def) +{ + if (pzlib_filefunc_def != NULL) + { + zlib_filefunc64_32_def zlib_filefunc64_32_def_fill; + zlib_filefunc64_32_def_fill.zfile_func64 = *pzlib_filefunc_def; + zlib_filefunc64_32_def_fill.ztell32_file = NULL; + zlib_filefunc64_32_def_fill.zseek32_file = NULL; + return zipOpen3(pathname, append, globalcomment, &zlib_filefunc64_32_def_fill); + } + else + return zipOpen3(pathname, append, globalcomment, NULL); +} + + + +extern zipFile ZEXPORT zipOpen (const char* pathname, int append) +{ + return zipOpen3((const void*)pathname,append,NULL,NULL); +} + +extern zipFile ZEXPORT zipOpen64 (const void* pathname, int append) +{ + return zipOpen3(pathname,append,NULL,NULL); +} + +int Write_LocalFileHeader(zip64_internal* zi, const char* filename, uInt size_extrafield_local, const void* extrafield_local) +{ + /* write the local header */ + int err; + uInt size_filename = (uInt)strlen(filename); + uInt size_extrafield = size_extrafield_local; + + err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)LOCALHEADERMAGIC, 4); + + if (err==ZIP_OK) + { + if(zi->ci.zip64) + err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)45,2);/* version needed to extract */ + else + err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)20,2);/* version needed to extract */ + } + + if (err==ZIP_OK) + err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)zi->ci.flag,2); + + if (err==ZIP_OK) + err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)zi->ci.method,2); + + if (err==ZIP_OK) + err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)zi->ci.dosDate,4); + + // CRC / Compressed size / Uncompressed size will be filled in later and rewritten later + if (err==ZIP_OK) + err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)0,4); /* crc 32, unknown */ + if (err==ZIP_OK) + { + if(zi->ci.zip64) + err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)0xFFFFFFFF,4); /* compressed size, unknown */ + else + err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)0,4); /* compressed size, unknown */ + } + if (err==ZIP_OK) + { + if(zi->ci.zip64) + err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)0xFFFFFFFF,4); /* uncompressed size, unknown */ + else + err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)0,4); /* uncompressed size, unknown */ + } + + if (err==ZIP_OK) + err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)size_filename,2); + + if(zi->ci.zip64) + { + size_extrafield += 20; + } + + if (err==ZIP_OK) + err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)size_extrafield,2); + + if ((err==ZIP_OK) && (size_filename > 0)) + { + if (ZWRITE64(zi->z_filefunc,zi->filestream,filename,size_filename)!=size_filename) + err = ZIP_ERRNO; + } + + if ((err==ZIP_OK) && (size_extrafield_local > 0)) + { + if (ZWRITE64(zi->z_filefunc, zi->filestream, extrafield_local, size_extrafield_local) != size_extrafield_local) + err = ZIP_ERRNO; + } + + + if ((err==ZIP_OK) && (zi->ci.zip64)) + { + // write the Zip64 extended info + short HeaderID = 1; + short DataSize = 16; + ZPOS64_T CompressedSize = 0; + ZPOS64_T UncompressedSize = 0; + + // Remember position of Zip64 extended info for the local file header. (needed when we update size after done with file) + zi->ci.pos_zip64extrainfo = ZTELL64(zi->z_filefunc,zi->filestream); + + err = zip64local_putValue(&zi->z_filefunc, zi->filestream, (short)HeaderID,2); + err = zip64local_putValue(&zi->z_filefunc, zi->filestream, (short)DataSize,2); + + err = zip64local_putValue(&zi->z_filefunc, zi->filestream, (ZPOS64_T)UncompressedSize,8); + err = zip64local_putValue(&zi->z_filefunc, zi->filestream, (ZPOS64_T)CompressedSize,8); + } + + return err; +} + +/* + NOTE. + When writing RAW the ZIP64 extended information in extrafield_local and extrafield_global needs to be stripped + before calling this function it can be done with zipRemoveExtraInfoBlock + + It is not done here because then we need to realloc a new buffer since parameters are 'const' and I want to minimize + unnecessary allocations. + */ +extern int ZEXPORT zipOpenNewFileInZip4_64 (zipFile file, const char* filename, const zip_fileinfo* zipfi, + const void* extrafield_local, uInt size_extrafield_local, + const void* extrafield_global, uInt size_extrafield_global, + const char* comment, int method, int level, int raw, + int windowBits,int memLevel, int strategy, + const char* password, uLong crcForCrypting, + uLong versionMadeBy, uLong flagBase, int zip64) +{ + zip64_internal* zi; + uInt size_filename; + uInt size_comment; + uInt i; + int err = ZIP_OK; + +# ifdef NOCRYPT + (crcForCrypting); + if (password != NULL) + return ZIP_PARAMERROR; +# endif + + if (file == NULL) + return ZIP_PARAMERROR; + +#ifdef HAVE_BZIP2 + if ((method!=0) && (method!=Z_DEFLATED) && (method!=Z_BZIP2ED)) + return ZIP_PARAMERROR; +#else + if ((method!=0) && (method!=Z_DEFLATED)) + return ZIP_PARAMERROR; +#endif + + zi = (zip64_internal*)file; + + if (zi->in_opened_file_inzip == 1) + { + err = zipCloseFileInZip (file); + if (err != ZIP_OK) + return err; + } + + if (filename==NULL) + filename="-"; + + if (comment==NULL) + size_comment = 0; + else + size_comment = (uInt)strlen(comment); + + size_filename = (uInt)strlen(filename); + + if (zipfi == NULL) + zi->ci.dosDate = 0; + else + { + if (zipfi->dosDate != 0) + zi->ci.dosDate = zipfi->dosDate; + else + zi->ci.dosDate = zip64local_TmzDateToDosDate(&zipfi->tmz_date); + } + + zi->ci.flag = flagBase; + if ((level==8) || (level==9)) + zi->ci.flag |= 2; + if (level==2) + zi->ci.flag |= 4; + if (level==1) + zi->ci.flag |= 6; + if (password != NULL) + zi->ci.flag |= 1; + + zi->ci.crc32 = 0; + zi->ci.method = method; + zi->ci.encrypt = 0; + zi->ci.stream_initialised = 0; + zi->ci.pos_in_buffered_data = 0; + zi->ci.raw = raw; + zi->ci.pos_local_header = ZTELL64(zi->z_filefunc,zi->filestream); + + zi->ci.size_centralheader = SIZECENTRALHEADER + size_filename + size_extrafield_global + size_comment; + zi->ci.size_centralExtraFree = 32; // Extra space we have reserved in case we need to add ZIP64 extra info data + + zi->ci.central_header = (char*)ALLOC((uInt)zi->ci.size_centralheader + zi->ci.size_centralExtraFree); + + zi->ci.size_centralExtra = size_extrafield_global; + zip64local_putValue_inmemory(zi->ci.central_header,(uLong)CENTRALHEADERMAGIC,4); + /* version info */ + zip64local_putValue_inmemory(zi->ci.central_header+4,(uLong)versionMadeBy,2); + zip64local_putValue_inmemory(zi->ci.central_header+6,(uLong)20,2); + zip64local_putValue_inmemory(zi->ci.central_header+8,(uLong)zi->ci.flag,2); + zip64local_putValue_inmemory(zi->ci.central_header+10,(uLong)zi->ci.method,2); + zip64local_putValue_inmemory(zi->ci.central_header+12,(uLong)zi->ci.dosDate,4); + zip64local_putValue_inmemory(zi->ci.central_header+16,(uLong)0,4); /*crc*/ + zip64local_putValue_inmemory(zi->ci.central_header+20,(uLong)0,4); /*compr size*/ + zip64local_putValue_inmemory(zi->ci.central_header+24,(uLong)0,4); /*uncompr size*/ + zip64local_putValue_inmemory(zi->ci.central_header+28,(uLong)size_filename,2); + zip64local_putValue_inmemory(zi->ci.central_header+30,(uLong)size_extrafield_global,2); + zip64local_putValue_inmemory(zi->ci.central_header+32,(uLong)size_comment,2); + zip64local_putValue_inmemory(zi->ci.central_header+34,(uLong)0,2); /*disk nm start*/ + + if (zipfi==NULL) + zip64local_putValue_inmemory(zi->ci.central_header+36,(uLong)0,2); + else + zip64local_putValue_inmemory(zi->ci.central_header+36,(uLong)zipfi->internal_fa,2); + + if (zipfi==NULL) + zip64local_putValue_inmemory(zi->ci.central_header+38,(uLong)0,4); + else + zip64local_putValue_inmemory(zi->ci.central_header+38,(uLong)zipfi->external_fa,4); + + if(zi->ci.pos_local_header >= 0xffffffff) + zip64local_putValue_inmemory(zi->ci.central_header+42,(uLong)0xffffffff,4); + else + zip64local_putValue_inmemory(zi->ci.central_header+42,(uLong)zi->ci.pos_local_header - zi->add_position_when_writting_offset,4); + + for (i=0;ici.central_header+SIZECENTRALHEADER+i) = *(filename+i); + + for (i=0;ici.central_header+SIZECENTRALHEADER+size_filename+i) = + *(((const char*)extrafield_global)+i); + + for (i=0;ici.central_header+SIZECENTRALHEADER+size_filename+ + size_extrafield_global+i) = *(comment+i); + if (zi->ci.central_header == NULL) + return ZIP_INTERNALERROR; + + zi->ci.zip64 = zip64; + zi->ci.totalCompressedData = 0; + zi->ci.totalUncompressedData = 0; + zi->ci.pos_zip64extrainfo = 0; + + err = Write_LocalFileHeader(zi, filename, size_extrafield_local, extrafield_local); + +#ifdef HAVE_BZIP2 + zi->ci.bstream.avail_in = (uInt)0; + zi->ci.bstream.avail_out = (uInt)Z_BUFSIZE; + zi->ci.bstream.next_out = (char*)zi->ci.buffered_data; + zi->ci.bstream.total_in_hi32 = 0; + zi->ci.bstream.total_in_lo32 = 0; + zi->ci.bstream.total_out_hi32 = 0; + zi->ci.bstream.total_out_lo32 = 0; +#endif + + zi->ci.stream.avail_in = (uInt)0; + zi->ci.stream.avail_out = (uInt)Z_BUFSIZE; + zi->ci.stream.next_out = zi->ci.buffered_data; + zi->ci.stream.total_in = 0; + zi->ci.stream.total_out = 0; + zi->ci.stream.data_type = Z_BINARY; + +#ifdef HAVE_BZIP2 + if ((err==ZIP_OK) && (zi->ci.method == Z_DEFLATED || zi->ci.method == Z_BZIP2ED) && (!zi->ci.raw)) +#else + if ((err==ZIP_OK) && (zi->ci.method == Z_DEFLATED) && (!zi->ci.raw)) +#endif + { + if(zi->ci.method == Z_DEFLATED) + { + zi->ci.stream.zalloc = (alloc_func)0; + zi->ci.stream.zfree = (free_func)0; + zi->ci.stream.opaque = (voidpf)0; + + if (windowBits>0) + windowBits = -windowBits; + + err = deflateInit2(&zi->ci.stream, level, Z_DEFLATED, windowBits, memLevel, strategy); + + if (err==Z_OK) + zi->ci.stream_initialised = Z_DEFLATED; + } + else if(zi->ci.method == Z_BZIP2ED) + { +#ifdef HAVE_BZIP2 + // Init BZip stuff here + zi->ci.bstream.bzalloc = 0; + zi->ci.bstream.bzfree = 0; + zi->ci.bstream.opaque = (voidpf)0; + + err = BZ2_bzCompressInit(&zi->ci.bstream, level, 0,35); + if(err == BZ_OK) + zi->ci.stream_initialised = Z_BZIP2ED; +#endif + } + + } + +# ifndef NOCRYPT + zi->ci.crypt_header_size = 0; + if ((err==Z_OK) && (password != NULL)) + { + unsigned char bufHead[RAND_HEAD_LEN]; + unsigned int sizeHead; + zi->ci.encrypt = 1; + zi->ci.pcrc_32_tab = get_crc_table(); + /*init_keys(password,zi->ci.keys,zi->ci.pcrc_32_tab);*/ + + sizeHead=crypthead(password,bufHead,RAND_HEAD_LEN,zi->ci.keys,zi->ci.pcrc_32_tab,crcForCrypting); + zi->ci.crypt_header_size = sizeHead; + + if (ZWRITE64(zi->z_filefunc,zi->filestream,bufHead,sizeHead) != sizeHead) + err = ZIP_ERRNO; + } +# endif + + if (err==Z_OK) + zi->in_opened_file_inzip = 1; + return err; +} + +extern int ZEXPORT zipOpenNewFileInZip4 (zipFile file, const char* filename, const zip_fileinfo* zipfi, + const void* extrafield_local, uInt size_extrafield_local, + const void* extrafield_global, uInt size_extrafield_global, + const char* comment, int method, int level, int raw, + int windowBits,int memLevel, int strategy, + const char* password, uLong crcForCrypting, + uLong versionMadeBy, uLong flagBase) +{ + return zipOpenNewFileInZip4_64 (file, filename, zipfi, + extrafield_local, size_extrafield_local, + extrafield_global, size_extrafield_global, + comment, method, level, raw, + windowBits, memLevel, strategy, + password, crcForCrypting, versionMadeBy, flagBase, 0); +} + +extern int ZEXPORT zipOpenNewFileInZip3 (zipFile file, const char* filename, const zip_fileinfo* zipfi, + const void* extrafield_local, uInt size_extrafield_local, + const void* extrafield_global, uInt size_extrafield_global, + const char* comment, int method, int level, int raw, + int windowBits,int memLevel, int strategy, + const char* password, uLong crcForCrypting) +{ + return zipOpenNewFileInZip4_64 (file, filename, zipfi, + extrafield_local, size_extrafield_local, + extrafield_global, size_extrafield_global, + comment, method, level, raw, + windowBits, memLevel, strategy, + password, crcForCrypting, VERSIONMADEBY, 0, 0); +} + +extern int ZEXPORT zipOpenNewFileInZip3_64(zipFile file, const char* filename, const zip_fileinfo* zipfi, + const void* extrafield_local, uInt size_extrafield_local, + const void* extrafield_global, uInt size_extrafield_global, + const char* comment, int method, int level, int raw, + int windowBits,int memLevel, int strategy, + const char* password, uLong crcForCrypting, int zip64) +{ + return zipOpenNewFileInZip4_64 (file, filename, zipfi, + extrafield_local, size_extrafield_local, + extrafield_global, size_extrafield_global, + comment, method, level, raw, + windowBits, memLevel, strategy, + password, crcForCrypting, VERSIONMADEBY, 0, zip64); +} + +extern int ZEXPORT zipOpenNewFileInZip2(zipFile file, const char* filename, const zip_fileinfo* zipfi, + const void* extrafield_local, uInt size_extrafield_local, + const void* extrafield_global, uInt size_extrafield_global, + const char* comment, int method, int level, int raw) +{ + return zipOpenNewFileInZip4_64 (file, filename, zipfi, + extrafield_local, size_extrafield_local, + extrafield_global, size_extrafield_global, + comment, method, level, raw, + -MAX_WBITS, DEF_MEM_LEVEL, Z_DEFAULT_STRATEGY, + NULL, 0, VERSIONMADEBY, 0, 0); +} + +extern int ZEXPORT zipOpenNewFileInZip2_64(zipFile file, const char* filename, const zip_fileinfo* zipfi, + const void* extrafield_local, uInt size_extrafield_local, + const void* extrafield_global, uInt size_extrafield_global, + const char* comment, int method, int level, int raw, int zip64) +{ + return zipOpenNewFileInZip4_64 (file, filename, zipfi, + extrafield_local, size_extrafield_local, + extrafield_global, size_extrafield_global, + comment, method, level, raw, + -MAX_WBITS, DEF_MEM_LEVEL, Z_DEFAULT_STRATEGY, + NULL, 0, VERSIONMADEBY, 0, zip64); +} + +extern int ZEXPORT zipOpenNewFileInZip64 (zipFile file, const char* filename, const zip_fileinfo* zipfi, + const void* extrafield_local, uInt size_extrafield_local, + const void*extrafield_global, uInt size_extrafield_global, + const char* comment, int method, int level, int zip64) +{ + return zipOpenNewFileInZip4_64 (file, filename, zipfi, + extrafield_local, size_extrafield_local, + extrafield_global, size_extrafield_global, + comment, method, level, 0, + -MAX_WBITS, DEF_MEM_LEVEL, Z_DEFAULT_STRATEGY, + NULL, 0, VERSIONMADEBY, 0, zip64); +} + +extern int ZEXPORT zipOpenNewFileInZip (zipFile file, const char* filename, const zip_fileinfo* zipfi, + const void* extrafield_local, uInt size_extrafield_local, + const void*extrafield_global, uInt size_extrafield_global, + const char* comment, int method, int level) +{ + return zipOpenNewFileInZip4_64 (file, filename, zipfi, + extrafield_local, size_extrafield_local, + extrafield_global, size_extrafield_global, + comment, method, level, 0, + -MAX_WBITS, DEF_MEM_LEVEL, Z_DEFAULT_STRATEGY, + NULL, 0, VERSIONMADEBY, 0, 0); +} + +local int zip64FlushWriteBuffer(zip64_internal* zi) +{ + int err=ZIP_OK; + + if (zi->ci.encrypt != 0) + { +#ifndef NOCRYPT + uInt i; + int t; + for (i=0;ici.pos_in_buffered_data;i++) + zi->ci.buffered_data[i] = zencode(zi->ci.keys, zi->ci.pcrc_32_tab, zi->ci.buffered_data[i],t); +#endif + } + + if (ZWRITE64(zi->z_filefunc,zi->filestream,zi->ci.buffered_data,zi->ci.pos_in_buffered_data) != zi->ci.pos_in_buffered_data) + err = ZIP_ERRNO; + + zi->ci.totalCompressedData += zi->ci.pos_in_buffered_data; + +#ifdef HAVE_BZIP2 + if(zi->ci.method == Z_BZIP2ED) + { + zi->ci.totalUncompressedData += zi->ci.bstream.total_in_lo32; + zi->ci.bstream.total_in_lo32 = 0; + zi->ci.bstream.total_in_hi32 = 0; + } + else +#endif + { + zi->ci.totalUncompressedData += zi->ci.stream.total_in; + zi->ci.stream.total_in = 0; + } + + + zi->ci.pos_in_buffered_data = 0; + + return err; +} + +extern int ZEXPORT zipWriteInFileInZip (zipFile file,const void* buf,unsigned int len) +{ + zip64_internal* zi; + int err=ZIP_OK; + + if (file == NULL) + return ZIP_PARAMERROR; + zi = (zip64_internal*)file; + + if (zi->in_opened_file_inzip == 0) + return ZIP_PARAMERROR; + + zi->ci.crc32 = crc32(zi->ci.crc32,buf,(uInt)len); + +#ifdef HAVE_BZIP2 + if(zi->ci.method == Z_BZIP2ED && (!zi->ci.raw)) + { + zi->ci.bstream.next_in = (void*)buf; + zi->ci.bstream.avail_in = len; + err = BZ_RUN_OK; + + while ((err==BZ_RUN_OK) && (zi->ci.bstream.avail_in>0)) + { + if (zi->ci.bstream.avail_out == 0) + { + if (zip64FlushWriteBuffer(zi) == ZIP_ERRNO) + err = ZIP_ERRNO; + zi->ci.bstream.avail_out = (uInt)Z_BUFSIZE; + zi->ci.bstream.next_out = (char*)zi->ci.buffered_data; + } + + + if(err != BZ_RUN_OK) + break; + + if ((zi->ci.method == Z_BZIP2ED) && (!zi->ci.raw)) + { + uLong uTotalOutBefore_lo = zi->ci.bstream.total_out_lo32; +// uLong uTotalOutBefore_hi = zi->ci.bstream.total_out_hi32; + err=BZ2_bzCompress(&zi->ci.bstream, BZ_RUN); + + zi->ci.pos_in_buffered_data += (uInt)(zi->ci.bstream.total_out_lo32 - uTotalOutBefore_lo) ; + } + } + + if(err == BZ_RUN_OK) + err = ZIP_OK; + } + else +#endif + { + zi->ci.stream.next_in = (Bytef*)buf; + zi->ci.stream.avail_in = len; + + while ((err==ZIP_OK) && (zi->ci.stream.avail_in>0)) + { + if (zi->ci.stream.avail_out == 0) + { + if (zip64FlushWriteBuffer(zi) == ZIP_ERRNO) + err = ZIP_ERRNO; + zi->ci.stream.avail_out = (uInt)Z_BUFSIZE; + zi->ci.stream.next_out = zi->ci.buffered_data; + } + + + if(err != ZIP_OK) + break; + + if ((zi->ci.method == Z_DEFLATED) && (!zi->ci.raw)) + { + uLong uTotalOutBefore = zi->ci.stream.total_out; + err=deflate(&zi->ci.stream, Z_NO_FLUSH); + if(uTotalOutBefore > zi->ci.stream.total_out) + { + int bBreak = 0; + bBreak++; + } + + zi->ci.pos_in_buffered_data += (uInt)(zi->ci.stream.total_out - uTotalOutBefore) ; + } + else + { + uInt copy_this,i; + if (zi->ci.stream.avail_in < zi->ci.stream.avail_out) + copy_this = zi->ci.stream.avail_in; + else + copy_this = zi->ci.stream.avail_out; + + for (i = 0; i < copy_this; i++) + *(((char*)zi->ci.stream.next_out)+i) = + *(((const char*)zi->ci.stream.next_in)+i); + { + zi->ci.stream.avail_in -= copy_this; + zi->ci.stream.avail_out-= copy_this; + zi->ci.stream.next_in+= copy_this; + zi->ci.stream.next_out+= copy_this; + zi->ci.stream.total_in+= copy_this; + zi->ci.stream.total_out+= copy_this; + zi->ci.pos_in_buffered_data += copy_this; + } + } + }// while(...) + } + + return err; +} + +extern int ZEXPORT zipCloseFileInZipRaw (zipFile file, uLong uncompressed_size, uLong crc32) +{ + return zipCloseFileInZipRaw64 (file, uncompressed_size, crc32); +} + +extern int ZEXPORT zipCloseFileInZipRaw64 (zipFile file, ZPOS64_T uncompressed_size, uLong crc32) +{ + zip64_internal* zi; + ZPOS64_T compressed_size; + uLong invalidValue = 0xffffffff; + short datasize = 0; + int err=ZIP_OK; + + if (file == NULL) + return ZIP_PARAMERROR; + zi = (zip64_internal*)file; + + if (zi->in_opened_file_inzip == 0) + return ZIP_PARAMERROR; + zi->ci.stream.avail_in = 0; + + if ((zi->ci.method == Z_DEFLATED) && (!zi->ci.raw)) + { + while (err==ZIP_OK) + { + uLong uTotalOutBefore; + if (zi->ci.stream.avail_out == 0) + { + if (zip64FlushWriteBuffer(zi) == ZIP_ERRNO) + err = ZIP_ERRNO; + zi->ci.stream.avail_out = (uInt)Z_BUFSIZE; + zi->ci.stream.next_out = zi->ci.buffered_data; + } + uTotalOutBefore = zi->ci.stream.total_out; + err=deflate(&zi->ci.stream, Z_FINISH); + zi->ci.pos_in_buffered_data += (uInt)(zi->ci.stream.total_out - uTotalOutBefore) ; + } + } + else if ((zi->ci.method == Z_BZIP2ED) && (!zi->ci.raw)) + { +#ifdef HAVE_BZIP2 + err = BZ_FINISH_OK; + while (err==BZ_FINISH_OK) + { + uLong uTotalOutBefore; + if (zi->ci.bstream.avail_out == 0) + { + if (zip64FlushWriteBuffer(zi) == ZIP_ERRNO) + err = ZIP_ERRNO; + zi->ci.bstream.avail_out = (uInt)Z_BUFSIZE; + zi->ci.bstream.next_out = (char*)zi->ci.buffered_data; + } + uTotalOutBefore = zi->ci.bstream.total_out_lo32; + err=BZ2_bzCompress(&zi->ci.bstream, BZ_FINISH); + if(err == BZ_STREAM_END) + err = Z_STREAM_END; + + zi->ci.pos_in_buffered_data += (uInt)(zi->ci.bstream.total_out_lo32 - uTotalOutBefore); + } + + if(err == BZ_FINISH_OK) + err = ZIP_OK; +#endif + } + + if (err==Z_STREAM_END) + err=ZIP_OK; /* this is normal */ + + if ((zi->ci.pos_in_buffered_data>0) && (err==ZIP_OK)) + { + if (zip64FlushWriteBuffer(zi)==ZIP_ERRNO) + err = ZIP_ERRNO; + } + + if ((zi->ci.method == Z_DEFLATED) && (!zi->ci.raw)) + { + int tmp_err = deflateEnd(&zi->ci.stream); + if (err == ZIP_OK) + err = tmp_err; + zi->ci.stream_initialised = 0; + } +#ifdef HAVE_BZIP2 + else if((zi->ci.method == Z_BZIP2ED) && (!zi->ci.raw)) + { + int tmperr = BZ2_bzCompressEnd(&zi->ci.bstream); + if (err==ZIP_OK) + err = tmperr; + zi->ci.stream_initialised = 0; + } +#endif + + if (!zi->ci.raw) + { + crc32 = (uLong)zi->ci.crc32; + uncompressed_size = zi->ci.totalUncompressedData; + } + compressed_size = zi->ci.totalCompressedData; + +# ifndef NOCRYPT + compressed_size += zi->ci.crypt_header_size; +# endif + + // update Current Item crc and sizes, + if(compressed_size >= 0xffffffff || uncompressed_size >= 0xffffffff || zi->ci.pos_local_header >= 0xffffffff) + { + /*version Made by*/ + zip64local_putValue_inmemory(zi->ci.central_header+4,(uLong)45,2); + /*version needed*/ + zip64local_putValue_inmemory(zi->ci.central_header+6,(uLong)45,2); + + } + + zip64local_putValue_inmemory(zi->ci.central_header+16,crc32,4); /*crc*/ + + + if(compressed_size >= 0xffffffff) + zip64local_putValue_inmemory(zi->ci.central_header+20, invalidValue,4); /*compr size*/ + else + zip64local_putValue_inmemory(zi->ci.central_header+20, compressed_size,4); /*compr size*/ + + /// set internal file attributes field + if (zi->ci.stream.data_type == Z_ASCII) + zip64local_putValue_inmemory(zi->ci.central_header+36,(uLong)Z_ASCII,2); + + if(uncompressed_size >= 0xffffffff) + zip64local_putValue_inmemory(zi->ci.central_header+24, invalidValue,4); /*uncompr size*/ + else + zip64local_putValue_inmemory(zi->ci.central_header+24, uncompressed_size,4); /*uncompr size*/ + + // Add ZIP64 extra info field for uncompressed size + if(uncompressed_size >= 0xffffffff) + datasize += 8; + + // Add ZIP64 extra info field for compressed size + if(compressed_size >= 0xffffffff) + datasize += 8; + + // Add ZIP64 extra info field for relative offset to local file header of current file + if(zi->ci.pos_local_header >= 0xffffffff) + datasize += 8; + + if(datasize > 0) + { + char* p = NULL; + + if((uLong)(datasize + 4) > zi->ci.size_centralExtraFree) + { + // we can not write more data to the buffer that we have room for. + return ZIP_BADZIPFILE; + } + + p = zi->ci.central_header + zi->ci.size_centralheader; + + // Add Extra Information Header for 'ZIP64 information' + zip64local_putValue_inmemory(p, 0x0001, 2); // HeaderID + p += 2; + zip64local_putValue_inmemory(p, datasize, 2); // DataSize + p += 2; + + if(uncompressed_size >= 0xffffffff) + { + zip64local_putValue_inmemory(p, uncompressed_size, 8); + p += 8; + } + + if(compressed_size >= 0xffffffff) + { + zip64local_putValue_inmemory(p, compressed_size, 8); + p += 8; + } + + if(zi->ci.pos_local_header >= 0xffffffff) + { + zip64local_putValue_inmemory(p, zi->ci.pos_local_header, 8); + p += 8; + } + + // Update how much extra free space we got in the memory buffer + // and increase the centralheader size so the new ZIP64 fields are included + // ( 4 below is the size of HeaderID and DataSize field ) + zi->ci.size_centralExtraFree -= datasize + 4; + zi->ci.size_centralheader += datasize + 4; + + // Update the extra info size field + zi->ci.size_centralExtra += datasize + 4; + zip64local_putValue_inmemory(zi->ci.central_header+30,(uLong)zi->ci.size_centralExtra,2); + } + + if (err==ZIP_OK) + err = add_data_in_datablock(&zi->central_dir, zi->ci.central_header, (uLong)zi->ci.size_centralheader); + + free(zi->ci.central_header); + + if (err==ZIP_OK) + { + // Update the LocalFileHeader with the new values. + + ZPOS64_T cur_pos_inzip = ZTELL64(zi->z_filefunc,zi->filestream); + + if (ZSEEK64(zi->z_filefunc,zi->filestream, zi->ci.pos_local_header + 14,ZLIB_FILEFUNC_SEEK_SET)!=0) + err = ZIP_ERRNO; + + if (err==ZIP_OK) + err = zip64local_putValue(&zi->z_filefunc,zi->filestream,crc32,4); /* crc 32, unknown */ + + if(uncompressed_size >= 0xffffffff || compressed_size >= 0xffffffff ) + { + if(zi->ci.pos_zip64extrainfo > 0) + { + // Update the size in the ZIP64 extended field. + if (ZSEEK64(zi->z_filefunc,zi->filestream, zi->ci.pos_zip64extrainfo + 4,ZLIB_FILEFUNC_SEEK_SET)!=0) + err = ZIP_ERRNO; + + if (err==ZIP_OK) /* compressed size, unknown */ + err = zip64local_putValue(&zi->z_filefunc, zi->filestream, uncompressed_size, 8); + + if (err==ZIP_OK) /* uncompressed size, unknown */ + err = zip64local_putValue(&zi->z_filefunc, zi->filestream, compressed_size, 8); + } + else + err = ZIP_BADZIPFILE; // Caller passed zip64 = 0, so no room for zip64 info -> fatal + } + else + { + if (err==ZIP_OK) /* compressed size, unknown */ + err = zip64local_putValue(&zi->z_filefunc,zi->filestream,compressed_size,4); + + if (err==ZIP_OK) /* uncompressed size, unknown */ + err = zip64local_putValue(&zi->z_filefunc,zi->filestream,uncompressed_size,4); + } + + if (ZSEEK64(zi->z_filefunc,zi->filestream, cur_pos_inzip,ZLIB_FILEFUNC_SEEK_SET)!=0) + err = ZIP_ERRNO; + } + + zi->number_entry ++; + zi->in_opened_file_inzip = 0; + + return err; +} + +extern int ZEXPORT zipCloseFileInZip (zipFile file) +{ + return zipCloseFileInZipRaw (file,0,0); +} + +int Write_Zip64EndOfCentralDirectoryLocator(zip64_internal* zi, ZPOS64_T zip64eocd_pos_inzip) +{ + int err = ZIP_OK; + ZPOS64_T pos = zip64eocd_pos_inzip - zi->add_position_when_writting_offset; + + err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)ZIP64ENDLOCHEADERMAGIC,4); + + /*num disks*/ + if (err==ZIP_OK) /* number of the disk with the start of the central directory */ + err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)0,4); + + /*relative offset*/ + if (err==ZIP_OK) /* Relative offset to the Zip64EndOfCentralDirectory */ + err = zip64local_putValue(&zi->z_filefunc,zi->filestream, pos,8); + + /*total disks*/ /* Do not support spawning of disk so always say 1 here*/ + if (err==ZIP_OK) /* number of the disk with the start of the central directory */ + err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)1,4); + + return err; +} + +int Write_Zip64EndOfCentralDirectoryRecord(zip64_internal* zi, uLong size_centraldir, ZPOS64_T centraldir_pos_inzip) +{ + int err = ZIP_OK; + + uLong Zip64DataSize = 44; + + err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)ZIP64ENDHEADERMAGIC,4); + + if (err==ZIP_OK) /* size of this 'zip64 end of central directory' */ + err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(ZPOS64_T)Zip64DataSize,8); // why ZPOS64_T of this ? + + if (err==ZIP_OK) /* version made by */ + err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)45,2); + + if (err==ZIP_OK) /* version needed */ + err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)45,2); + + if (err==ZIP_OK) /* number of this disk */ + err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)0,4); + + if (err==ZIP_OK) /* number of the disk with the start of the central directory */ + err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)0,4); + + if (err==ZIP_OK) /* total number of entries in the central dir on this disk */ + err = zip64local_putValue(&zi->z_filefunc, zi->filestream, zi->number_entry, 8); + + if (err==ZIP_OK) /* total number of entries in the central dir */ + err = zip64local_putValue(&zi->z_filefunc, zi->filestream, zi->number_entry, 8); + + if (err==ZIP_OK) /* size of the central directory */ + err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(ZPOS64_T)size_centraldir,8); + + if (err==ZIP_OK) /* offset of start of central directory with respect to the starting disk number */ + { + ZPOS64_T pos = centraldir_pos_inzip - zi->add_position_when_writting_offset; + err = zip64local_putValue(&zi->z_filefunc,zi->filestream, (ZPOS64_T)pos,8); + } + return err; +} +int Write_EndOfCentralDirectoryRecord(zip64_internal* zi, uLong size_centraldir, ZPOS64_T centraldir_pos_inzip) +{ + int err = ZIP_OK; + + /*signature*/ + err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)ENDHEADERMAGIC,4); + + if (err==ZIP_OK) /* number of this disk */ + err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)0,2); + + if (err==ZIP_OK) /* number of the disk with the start of the central directory */ + err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)0,2); + + if (err==ZIP_OK) /* total number of entries in the central dir on this disk */ + { + { + if(zi->number_entry >= 0xFFFF) + err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)0xffff,2); // use value in ZIP64 record + else + err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)zi->number_entry,2); + } + } + + if (err==ZIP_OK) /* total number of entries in the central dir */ + { + if(zi->number_entry >= 0xFFFF) + err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)0xffff,2); // use value in ZIP64 record + else + err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)zi->number_entry,2); + } + + if (err==ZIP_OK) /* size of the central directory */ + err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)size_centraldir,4); + + if (err==ZIP_OK) /* offset of start of central directory with respect to the starting disk number */ + { + ZPOS64_T pos = centraldir_pos_inzip - zi->add_position_when_writting_offset; + if(pos >= 0xffffffff) + { + err = zip64local_putValue(&zi->z_filefunc,zi->filestream, (uLong)0xffffffff,4); + } + else + err = zip64local_putValue(&zi->z_filefunc,zi->filestream, (uLong)(centraldir_pos_inzip - zi->add_position_when_writting_offset),4); + } + + return err; +} + +int Write_GlobalComment(zip64_internal* zi, const char* global_comment) +{ + int err = ZIP_OK; + uInt size_global_comment = 0; + + if(global_comment != NULL) + size_global_comment = (uInt)strlen(global_comment); + + err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)size_global_comment,2); + + if (err == ZIP_OK && size_global_comment > 0) + { + if (ZWRITE64(zi->z_filefunc,zi->filestream, global_comment, size_global_comment) != size_global_comment) + err = ZIP_ERRNO; + } + return err; +} + +extern int ZEXPORT zipClose (zipFile file, const char* global_comment) +{ + zip64_internal* zi; + int err = 0; + uLong size_centraldir = 0; + ZPOS64_T centraldir_pos_inzip; + ZPOS64_T pos; + + if (file == NULL) + return ZIP_PARAMERROR; + + zi = (zip64_internal*)file; + + if (zi->in_opened_file_inzip == 1) + { + err = zipCloseFileInZip (file); + } + +#ifndef NO_ADDFILEINEXISTINGZIP + if (global_comment==NULL) + global_comment = zi->globalcomment; +#endif + + centraldir_pos_inzip = ZTELL64(zi->z_filefunc,zi->filestream); + + if (err==ZIP_OK) + { + linkedlist_datablock_internal* ldi = zi->central_dir.first_block; + while (ldi!=NULL) + { + if ((err==ZIP_OK) && (ldi->filled_in_this_block>0)) + { + if (ZWRITE64(zi->z_filefunc,zi->filestream, ldi->data, ldi->filled_in_this_block) != ldi->filled_in_this_block) + err = ZIP_ERRNO; + } + + size_centraldir += ldi->filled_in_this_block; + ldi = ldi->next_datablock; + } + } + free_linkedlist(&(zi->central_dir)); + + pos = centraldir_pos_inzip - zi->add_position_when_writting_offset; + if(pos >= 0xffffffff || zi->number_entry > 0xFFFF) + { + ZPOS64_T Zip64EOCDpos = ZTELL64(zi->z_filefunc,zi->filestream); + Write_Zip64EndOfCentralDirectoryRecord(zi, size_centraldir, centraldir_pos_inzip); + + Write_Zip64EndOfCentralDirectoryLocator(zi, Zip64EOCDpos); + } + + if (err==ZIP_OK) + err = Write_EndOfCentralDirectoryRecord(zi, size_centraldir, centraldir_pos_inzip); + + if(err == ZIP_OK) + err = Write_GlobalComment(zi, global_comment); + + if (ZCLOSE64(zi->z_filefunc,zi->filestream) != 0) + if (err == ZIP_OK) + err = ZIP_ERRNO; + +#ifndef NO_ADDFILEINEXISTINGZIP + TRYFREE(zi->globalcomment); +#endif + TRYFREE(zi); + + return err; +} + +extern int ZEXPORT zipRemoveExtraInfoBlock (char* pData, int* dataLen, short sHeader) +{ + char* p = pData; + int size = 0; + char* pNewHeader; + char* pTmp; + short header; + short dataSize; + + int retVal = ZIP_OK; + + if(pData == NULL || *dataLen < 4) + return ZIP_PARAMERROR; + + pNewHeader = (char*)ALLOC(*dataLen); + pTmp = pNewHeader; + + while(p < (pData + *dataLen)) + { + header = *(short*)p; + dataSize = *(((short*)p)+1); + + if( header == sHeader ) // Header found. + { + p += dataSize + 4; // skip it. do not copy to temp buffer + } + else + { + // Extra Info block should not be removed, So copy it to the temp buffer. + memcpy(pTmp, p, dataSize + 4); + p += dataSize + 4; + size += dataSize + 4; + } + + } + + if(size < *dataLen) + { + // clean old extra info block. + memset(pData,0, *dataLen); + + // copy the new extra info block over the old + if(size > 0) + memcpy(pData, pNewHeader, size); + + // set the new extra info size + *dataLen = size; + + retVal = ZIP_OK; + } + else + retVal = ZIP_ERRNO; + + TRYFREE(pNewHeader); + + return retVal; +} diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/minizip/zip.h b/software/scsi2sd-util/zlib-1.2.8/contrib/minizip/zip.h new file mode 100644 index 0000000..8aaebb6 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/minizip/zip.h @@ -0,0 +1,362 @@ +/* zip.h -- IO on .zip files using zlib + Version 1.1, February 14h, 2010 + part of the MiniZip project - ( http://www.winimage.com/zLibDll/minizip.html ) + + Copyright (C) 1998-2010 Gilles Vollant (minizip) ( http://www.winimage.com/zLibDll/minizip.html ) + + Modifications for Zip64 support + Copyright (C) 2009-2010 Mathias Svensson ( http://result42.com ) + + For more info read MiniZip_info.txt + + --------------------------------------------------------------------------- + + Condition of use and distribution are the same than zlib : + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. + + --------------------------------------------------------------------------- + + Changes + + See header of zip.h + +*/ + +#ifndef _zip12_H +#define _zip12_H + +#ifdef __cplusplus +extern "C" { +#endif + +//#define HAVE_BZIP2 + +#ifndef _ZLIB_H +#include "zlib.h" +#endif + +#ifndef _ZLIBIOAPI_H +#include "ioapi.h" +#endif + +#ifdef HAVE_BZIP2 +#include "bzlib.h" +#endif + +#define Z_BZIP2ED 12 + +#if defined(STRICTZIP) || defined(STRICTZIPUNZIP) +/* like the STRICT of WIN32, we define a pointer that cannot be converted + from (void*) without cast */ +typedef struct TagzipFile__ { int unused; } zipFile__; +typedef zipFile__ *zipFile; +#else +typedef voidp zipFile; +#endif + +#define ZIP_OK (0) +#define ZIP_EOF (0) +#define ZIP_ERRNO (Z_ERRNO) +#define ZIP_PARAMERROR (-102) +#define ZIP_BADZIPFILE (-103) +#define ZIP_INTERNALERROR (-104) + +#ifndef DEF_MEM_LEVEL +# if MAX_MEM_LEVEL >= 8 +# define DEF_MEM_LEVEL 8 +# else +# define DEF_MEM_LEVEL MAX_MEM_LEVEL +# endif +#endif +/* default memLevel */ + +/* tm_zip contain date/time info */ +typedef struct tm_zip_s +{ + uInt tm_sec; /* seconds after the minute - [0,59] */ + uInt tm_min; /* minutes after the hour - [0,59] */ + uInt tm_hour; /* hours since midnight - [0,23] */ + uInt tm_mday; /* day of the month - [1,31] */ + uInt tm_mon; /* months since January - [0,11] */ + uInt tm_year; /* years - [1980..2044] */ +} tm_zip; + +typedef struct +{ + tm_zip tmz_date; /* date in understandable format */ + uLong dosDate; /* if dos_date == 0, tmu_date is used */ +/* uLong flag; */ /* general purpose bit flag 2 bytes */ + + uLong internal_fa; /* internal file attributes 2 bytes */ + uLong external_fa; /* external file attributes 4 bytes */ +} zip_fileinfo; + +typedef const char* zipcharpc; + + +#define APPEND_STATUS_CREATE (0) +#define APPEND_STATUS_CREATEAFTER (1) +#define APPEND_STATUS_ADDINZIP (2) + +extern zipFile ZEXPORT zipOpen OF((const char *pathname, int append)); +extern zipFile ZEXPORT zipOpen64 OF((const void *pathname, int append)); +/* + Create a zipfile. + pathname contain on Windows XP a filename like "c:\\zlib\\zlib113.zip" or on + an Unix computer "zlib/zlib113.zip". + if the file pathname exist and append==APPEND_STATUS_CREATEAFTER, the zip + will be created at the end of the file. + (useful if the file contain a self extractor code) + if the file pathname exist and append==APPEND_STATUS_ADDINZIP, we will + add files in existing zip (be sure you don't add file that doesn't exist) + If the zipfile cannot be opened, the return value is NULL. + Else, the return value is a zipFile Handle, usable with other function + of this zip package. +*/ + +/* Note : there is no delete function into a zipfile. + If you want delete file into a zipfile, you must open a zipfile, and create another + Of couse, you can use RAW reading and writing to copy the file you did not want delte +*/ + +extern zipFile ZEXPORT zipOpen2 OF((const char *pathname, + int append, + zipcharpc* globalcomment, + zlib_filefunc_def* pzlib_filefunc_def)); + +extern zipFile ZEXPORT zipOpen2_64 OF((const void *pathname, + int append, + zipcharpc* globalcomment, + zlib_filefunc64_def* pzlib_filefunc_def)); + +extern int ZEXPORT zipOpenNewFileInZip OF((zipFile file, + const char* filename, + const zip_fileinfo* zipfi, + const void* extrafield_local, + uInt size_extrafield_local, + const void* extrafield_global, + uInt size_extrafield_global, + const char* comment, + int method, + int level)); + +extern int ZEXPORT zipOpenNewFileInZip64 OF((zipFile file, + const char* filename, + const zip_fileinfo* zipfi, + const void* extrafield_local, + uInt size_extrafield_local, + const void* extrafield_global, + uInt size_extrafield_global, + const char* comment, + int method, + int level, + int zip64)); + +/* + Open a file in the ZIP for writing. + filename : the filename in zip (if NULL, '-' without quote will be used + *zipfi contain supplemental information + if extrafield_local!=NULL and size_extrafield_local>0, extrafield_local + contains the extrafield data the the local header + if extrafield_global!=NULL and size_extrafield_global>0, extrafield_global + contains the extrafield data the the local header + if comment != NULL, comment contain the comment string + method contain the compression method (0 for store, Z_DEFLATED for deflate) + level contain the level of compression (can be Z_DEFAULT_COMPRESSION) + zip64 is set to 1 if a zip64 extended information block should be added to the local file header. + this MUST be '1' if the uncompressed size is >= 0xffffffff. + +*/ + + +extern int ZEXPORT zipOpenNewFileInZip2 OF((zipFile file, + const char* filename, + const zip_fileinfo* zipfi, + const void* extrafield_local, + uInt size_extrafield_local, + const void* extrafield_global, + uInt size_extrafield_global, + const char* comment, + int method, + int level, + int raw)); + + +extern int ZEXPORT zipOpenNewFileInZip2_64 OF((zipFile file, + const char* filename, + const zip_fileinfo* zipfi, + const void* extrafield_local, + uInt size_extrafield_local, + const void* extrafield_global, + uInt size_extrafield_global, + const char* comment, + int method, + int level, + int raw, + int zip64)); +/* + Same than zipOpenNewFileInZip, except if raw=1, we write raw file + */ + +extern int ZEXPORT zipOpenNewFileInZip3 OF((zipFile file, + const char* filename, + const zip_fileinfo* zipfi, + const void* extrafield_local, + uInt size_extrafield_local, + const void* extrafield_global, + uInt size_extrafield_global, + const char* comment, + int method, + int level, + int raw, + int windowBits, + int memLevel, + int strategy, + const char* password, + uLong crcForCrypting)); + +extern int ZEXPORT zipOpenNewFileInZip3_64 OF((zipFile file, + const char* filename, + const zip_fileinfo* zipfi, + const void* extrafield_local, + uInt size_extrafield_local, + const void* extrafield_global, + uInt size_extrafield_global, + const char* comment, + int method, + int level, + int raw, + int windowBits, + int memLevel, + int strategy, + const char* password, + uLong crcForCrypting, + int zip64 + )); + +/* + Same than zipOpenNewFileInZip2, except + windowBits,memLevel,,strategy : see parameter strategy in deflateInit2 + password : crypting password (NULL for no crypting) + crcForCrypting : crc of file to compress (needed for crypting) + */ + +extern int ZEXPORT zipOpenNewFileInZip4 OF((zipFile file, + const char* filename, + const zip_fileinfo* zipfi, + const void* extrafield_local, + uInt size_extrafield_local, + const void* extrafield_global, + uInt size_extrafield_global, + const char* comment, + int method, + int level, + int raw, + int windowBits, + int memLevel, + int strategy, + const char* password, + uLong crcForCrypting, + uLong versionMadeBy, + uLong flagBase + )); + + +extern int ZEXPORT zipOpenNewFileInZip4_64 OF((zipFile file, + const char* filename, + const zip_fileinfo* zipfi, + const void* extrafield_local, + uInt size_extrafield_local, + const void* extrafield_global, + uInt size_extrafield_global, + const char* comment, + int method, + int level, + int raw, + int windowBits, + int memLevel, + int strategy, + const char* password, + uLong crcForCrypting, + uLong versionMadeBy, + uLong flagBase, + int zip64 + )); +/* + Same than zipOpenNewFileInZip4, except + versionMadeBy : value for Version made by field + flag : value for flag field (compression level info will be added) + */ + + +extern int ZEXPORT zipWriteInFileInZip OF((zipFile file, + const void* buf, + unsigned len)); +/* + Write data in the zipfile +*/ + +extern int ZEXPORT zipCloseFileInZip OF((zipFile file)); +/* + Close the current file in the zipfile +*/ + +extern int ZEXPORT zipCloseFileInZipRaw OF((zipFile file, + uLong uncompressed_size, + uLong crc32)); + +extern int ZEXPORT zipCloseFileInZipRaw64 OF((zipFile file, + ZPOS64_T uncompressed_size, + uLong crc32)); + +/* + Close the current file in the zipfile, for file opened with + parameter raw=1 in zipOpenNewFileInZip2 + uncompressed_size and crc32 are value for the uncompressed size +*/ + +extern int ZEXPORT zipClose OF((zipFile file, + const char* global_comment)); +/* + Close the zipfile +*/ + + +extern int ZEXPORT zipRemoveExtraInfoBlock OF((char* pData, int* dataLen, short sHeader)); +/* + zipRemoveExtraInfoBlock - Added by Mathias Svensson + + Remove extra information block from a extra information data for the local file header or central directory header + + It is needed to remove ZIP64 extra information blocks when before data is written if using RAW mode. + + 0x0001 is the signature header for the ZIP64 extra information blocks + + usage. + Remove ZIP64 Extra information from a central director extra field data + zipRemoveExtraInfoBlock(pCenDirExtraFieldData, &nCenDirExtraFieldDataLen, 0x0001); + + Remove ZIP64 Extra information from a Local File Header extra field data + zipRemoveExtraInfoBlock(pLocalHeaderExtraFieldData, &nLocalHeaderExtraFieldDataLen, 0x0001); +*/ + +#ifdef __cplusplus +} +#endif + +#endif /* _zip64_H */ diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/pascal/example.pas b/software/scsi2sd-util/zlib-1.2.8/contrib/pascal/example.pas new file mode 100644 index 0000000..5518b36 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/pascal/example.pas @@ -0,0 +1,599 @@ +(* example.c -- usage example of the zlib compression library + * Copyright (C) 1995-2003 Jean-loup Gailly. + * For conditions of distribution and use, see copyright notice in zlib.h + * + * Pascal translation + * Copyright (C) 1998 by Jacques Nomssi Nzali. + * For conditions of distribution and use, see copyright notice in readme.txt + * + * Adaptation to the zlibpas interface + * Copyright (C) 2003 by Cosmin Truta. + * For conditions of distribution and use, see copyright notice in readme.txt + *) + +program example; + +{$DEFINE TEST_COMPRESS} +{DO NOT $DEFINE TEST_GZIO} +{$DEFINE TEST_DEFLATE} +{$DEFINE TEST_INFLATE} +{$DEFINE TEST_FLUSH} +{$DEFINE TEST_SYNC} +{$DEFINE TEST_DICT} + +uses SysUtils, zlibpas; + +const TESTFILE = 'foo.gz'; + +(* "hello world" would be more standard, but the repeated "hello" + * stresses the compression code better, sorry... + *) +const hello: PChar = 'hello, hello!'; + +const dictionary: PChar = 'hello'; + +var dictId: LongInt; (* Adler32 value of the dictionary *) + +procedure CHECK_ERR(err: Integer; msg: String); +begin + if err <> Z_OK then + begin + WriteLn(msg, ' error: ', err); + Halt(1); + end; +end; + +procedure EXIT_ERR(const msg: String); +begin + WriteLn('Error: ', msg); + Halt(1); +end; + +(* =========================================================================== + * Test compress and uncompress + *) +{$IFDEF TEST_COMPRESS} +procedure test_compress(compr: Pointer; comprLen: LongInt; + uncompr: Pointer; uncomprLen: LongInt); +var err: Integer; + len: LongInt; +begin + len := StrLen(hello)+1; + + err := compress(compr, comprLen, hello, len); + CHECK_ERR(err, 'compress'); + + StrCopy(PChar(uncompr), 'garbage'); + + err := uncompress(uncompr, uncomprLen, compr, comprLen); + CHECK_ERR(err, 'uncompress'); + + if StrComp(PChar(uncompr), hello) <> 0 then + EXIT_ERR('bad uncompress') + else + WriteLn('uncompress(): ', PChar(uncompr)); +end; +{$ENDIF} + +(* =========================================================================== + * Test read/write of .gz files + *) +{$IFDEF TEST_GZIO} +procedure test_gzio(const fname: PChar; (* compressed file name *) + uncompr: Pointer; + uncomprLen: LongInt); +var err: Integer; + len: Integer; + zfile: gzFile; + pos: LongInt; +begin + len := StrLen(hello)+1; + + zfile := gzopen(fname, 'wb'); + if zfile = NIL then + begin + WriteLn('gzopen error'); + Halt(1); + end; + gzputc(zfile, 'h'); + if gzputs(zfile, 'ello') <> 4 then + begin + WriteLn('gzputs err: ', gzerror(zfile, err)); + Halt(1); + end; + {$IFDEF GZ_FORMAT_STRING} + if gzprintf(zfile, ', %s!', 'hello') <> 8 then + begin + WriteLn('gzprintf err: ', gzerror(zfile, err)); + Halt(1); + end; + {$ELSE} + if gzputs(zfile, ', hello!') <> 8 then + begin + WriteLn('gzputs err: ', gzerror(zfile, err)); + Halt(1); + end; + {$ENDIF} + gzseek(zfile, 1, SEEK_CUR); (* add one zero byte *) + gzclose(zfile); + + zfile := gzopen(fname, 'rb'); + if zfile = NIL then + begin + WriteLn('gzopen error'); + Halt(1); + end; + + StrCopy(PChar(uncompr), 'garbage'); + + if gzread(zfile, uncompr, uncomprLen) <> len then + begin + WriteLn('gzread err: ', gzerror(zfile, err)); + Halt(1); + end; + if StrComp(PChar(uncompr), hello) <> 0 then + begin + WriteLn('bad gzread: ', PChar(uncompr)); + Halt(1); + end + else + WriteLn('gzread(): ', PChar(uncompr)); + + pos := gzseek(zfile, -8, SEEK_CUR); + if (pos <> 6) or (gztell(zfile) <> pos) then + begin + WriteLn('gzseek error, pos=', pos, ', gztell=', gztell(zfile)); + Halt(1); + end; + + if gzgetc(zfile) <> ' ' then + begin + WriteLn('gzgetc error'); + Halt(1); + end; + + if gzungetc(' ', zfile) <> ' ' then + begin + WriteLn('gzungetc error'); + Halt(1); + end; + + gzgets(zfile, PChar(uncompr), uncomprLen); + uncomprLen := StrLen(PChar(uncompr)); + if uncomprLen <> 7 then (* " hello!" *) + begin + WriteLn('gzgets err after gzseek: ', gzerror(zfile, err)); + Halt(1); + end; + if StrComp(PChar(uncompr), hello + 6) <> 0 then + begin + WriteLn('bad gzgets after gzseek'); + Halt(1); + end + else + WriteLn('gzgets() after gzseek: ', PChar(uncompr)); + + gzclose(zfile); +end; +{$ENDIF} + +(* =========================================================================== + * Test deflate with small buffers + *) +{$IFDEF TEST_DEFLATE} +procedure test_deflate(compr: Pointer; comprLen: LongInt); +var c_stream: z_stream; (* compression stream *) + err: Integer; + len: LongInt; +begin + len := StrLen(hello)+1; + + c_stream.zalloc := NIL; + c_stream.zfree := NIL; + c_stream.opaque := NIL; + + err := deflateInit(c_stream, Z_DEFAULT_COMPRESSION); + CHECK_ERR(err, 'deflateInit'); + + c_stream.next_in := hello; + c_stream.next_out := compr; + + while (c_stream.total_in <> len) and + (c_stream.total_out < comprLen) do + begin + c_stream.avail_out := 1; { force small buffers } + c_stream.avail_in := 1; + err := deflate(c_stream, Z_NO_FLUSH); + CHECK_ERR(err, 'deflate'); + end; + + (* Finish the stream, still forcing small buffers: *) + while TRUE do + begin + c_stream.avail_out := 1; + err := deflate(c_stream, Z_FINISH); + if err = Z_STREAM_END then + break; + CHECK_ERR(err, 'deflate'); + end; + + err := deflateEnd(c_stream); + CHECK_ERR(err, 'deflateEnd'); +end; +{$ENDIF} + +(* =========================================================================== + * Test inflate with small buffers + *) +{$IFDEF TEST_INFLATE} +procedure test_inflate(compr: Pointer; comprLen : LongInt; + uncompr: Pointer; uncomprLen : LongInt); +var err: Integer; + d_stream: z_stream; (* decompression stream *) +begin + StrCopy(PChar(uncompr), 'garbage'); + + d_stream.zalloc := NIL; + d_stream.zfree := NIL; + d_stream.opaque := NIL; + + d_stream.next_in := compr; + d_stream.avail_in := 0; + d_stream.next_out := uncompr; + + err := inflateInit(d_stream); + CHECK_ERR(err, 'inflateInit'); + + while (d_stream.total_out < uncomprLen) and + (d_stream.total_in < comprLen) do + begin + d_stream.avail_out := 1; (* force small buffers *) + d_stream.avail_in := 1; + err := inflate(d_stream, Z_NO_FLUSH); + if err = Z_STREAM_END then + break; + CHECK_ERR(err, 'inflate'); + end; + + err := inflateEnd(d_stream); + CHECK_ERR(err, 'inflateEnd'); + + if StrComp(PChar(uncompr), hello) <> 0 then + EXIT_ERR('bad inflate') + else + WriteLn('inflate(): ', PChar(uncompr)); +end; +{$ENDIF} + +(* =========================================================================== + * Test deflate with large buffers and dynamic change of compression level + *) +{$IFDEF TEST_DEFLATE} +procedure test_large_deflate(compr: Pointer; comprLen: LongInt; + uncompr: Pointer; uncomprLen: LongInt); +var c_stream: z_stream; (* compression stream *) + err: Integer; +begin + c_stream.zalloc := NIL; + c_stream.zfree := NIL; + c_stream.opaque := NIL; + + err := deflateInit(c_stream, Z_BEST_SPEED); + CHECK_ERR(err, 'deflateInit'); + + c_stream.next_out := compr; + c_stream.avail_out := Integer(comprLen); + + (* At this point, uncompr is still mostly zeroes, so it should compress + * very well: + *) + c_stream.next_in := uncompr; + c_stream.avail_in := Integer(uncomprLen); + err := deflate(c_stream, Z_NO_FLUSH); + CHECK_ERR(err, 'deflate'); + if c_stream.avail_in <> 0 then + EXIT_ERR('deflate not greedy'); + + (* Feed in already compressed data and switch to no compression: *) + deflateParams(c_stream, Z_NO_COMPRESSION, Z_DEFAULT_STRATEGY); + c_stream.next_in := compr; + c_stream.avail_in := Integer(comprLen div 2); + err := deflate(c_stream, Z_NO_FLUSH); + CHECK_ERR(err, 'deflate'); + + (* Switch back to compressing mode: *) + deflateParams(c_stream, Z_BEST_COMPRESSION, Z_FILTERED); + c_stream.next_in := uncompr; + c_stream.avail_in := Integer(uncomprLen); + err := deflate(c_stream, Z_NO_FLUSH); + CHECK_ERR(err, 'deflate'); + + err := deflate(c_stream, Z_FINISH); + if err <> Z_STREAM_END then + EXIT_ERR('deflate should report Z_STREAM_END'); + + err := deflateEnd(c_stream); + CHECK_ERR(err, 'deflateEnd'); +end; +{$ENDIF} + +(* =========================================================================== + * Test inflate with large buffers + *) +{$IFDEF TEST_INFLATE} +procedure test_large_inflate(compr: Pointer; comprLen: LongInt; + uncompr: Pointer; uncomprLen: LongInt); +var err: Integer; + d_stream: z_stream; (* decompression stream *) +begin + StrCopy(PChar(uncompr), 'garbage'); + + d_stream.zalloc := NIL; + d_stream.zfree := NIL; + d_stream.opaque := NIL; + + d_stream.next_in := compr; + d_stream.avail_in := Integer(comprLen); + + err := inflateInit(d_stream); + CHECK_ERR(err, 'inflateInit'); + + while TRUE do + begin + d_stream.next_out := uncompr; (* discard the output *) + d_stream.avail_out := Integer(uncomprLen); + err := inflate(d_stream, Z_NO_FLUSH); + if err = Z_STREAM_END then + break; + CHECK_ERR(err, 'large inflate'); + end; + + err := inflateEnd(d_stream); + CHECK_ERR(err, 'inflateEnd'); + + if d_stream.total_out <> 2 * uncomprLen + comprLen div 2 then + begin + WriteLn('bad large inflate: ', d_stream.total_out); + Halt(1); + end + else + WriteLn('large_inflate(): OK'); +end; +{$ENDIF} + +(* =========================================================================== + * Test deflate with full flush + *) +{$IFDEF TEST_FLUSH} +procedure test_flush(compr: Pointer; var comprLen : LongInt); +var c_stream: z_stream; (* compression stream *) + err: Integer; + len: Integer; +begin + len := StrLen(hello)+1; + + c_stream.zalloc := NIL; + c_stream.zfree := NIL; + c_stream.opaque := NIL; + + err := deflateInit(c_stream, Z_DEFAULT_COMPRESSION); + CHECK_ERR(err, 'deflateInit'); + + c_stream.next_in := hello; + c_stream.next_out := compr; + c_stream.avail_in := 3; + c_stream.avail_out := Integer(comprLen); + err := deflate(c_stream, Z_FULL_FLUSH); + CHECK_ERR(err, 'deflate'); + + Inc(PByteArray(compr)^[3]); (* force an error in first compressed block *) + c_stream.avail_in := len - 3; + + err := deflate(c_stream, Z_FINISH); + if err <> Z_STREAM_END then + CHECK_ERR(err, 'deflate'); + + err := deflateEnd(c_stream); + CHECK_ERR(err, 'deflateEnd'); + + comprLen := c_stream.total_out; +end; +{$ENDIF} + +(* =========================================================================== + * Test inflateSync() + *) +{$IFDEF TEST_SYNC} +procedure test_sync(compr: Pointer; comprLen: LongInt; + uncompr: Pointer; uncomprLen : LongInt); +var err: Integer; + d_stream: z_stream; (* decompression stream *) +begin + StrCopy(PChar(uncompr), 'garbage'); + + d_stream.zalloc := NIL; + d_stream.zfree := NIL; + d_stream.opaque := NIL; + + d_stream.next_in := compr; + d_stream.avail_in := 2; (* just read the zlib header *) + + err := inflateInit(d_stream); + CHECK_ERR(err, 'inflateInit'); + + d_stream.next_out := uncompr; + d_stream.avail_out := Integer(uncomprLen); + + inflate(d_stream, Z_NO_FLUSH); + CHECK_ERR(err, 'inflate'); + + d_stream.avail_in := Integer(comprLen-2); (* read all compressed data *) + err := inflateSync(d_stream); (* but skip the damaged part *) + CHECK_ERR(err, 'inflateSync'); + + err := inflate(d_stream, Z_FINISH); + if err <> Z_DATA_ERROR then + EXIT_ERR('inflate should report DATA_ERROR'); + (* Because of incorrect adler32 *) + + err := inflateEnd(d_stream); + CHECK_ERR(err, 'inflateEnd'); + + WriteLn('after inflateSync(): hel', PChar(uncompr)); +end; +{$ENDIF} + +(* =========================================================================== + * Test deflate with preset dictionary + *) +{$IFDEF TEST_DICT} +procedure test_dict_deflate(compr: Pointer; comprLen: LongInt); +var c_stream: z_stream; (* compression stream *) + err: Integer; +begin + c_stream.zalloc := NIL; + c_stream.zfree := NIL; + c_stream.opaque := NIL; + + err := deflateInit(c_stream, Z_BEST_COMPRESSION); + CHECK_ERR(err, 'deflateInit'); + + err := deflateSetDictionary(c_stream, dictionary, StrLen(dictionary)); + CHECK_ERR(err, 'deflateSetDictionary'); + + dictId := c_stream.adler; + c_stream.next_out := compr; + c_stream.avail_out := Integer(comprLen); + + c_stream.next_in := hello; + c_stream.avail_in := StrLen(hello)+1; + + err := deflate(c_stream, Z_FINISH); + if err <> Z_STREAM_END then + EXIT_ERR('deflate should report Z_STREAM_END'); + + err := deflateEnd(c_stream); + CHECK_ERR(err, 'deflateEnd'); +end; +{$ENDIF} + +(* =========================================================================== + * Test inflate with a preset dictionary + *) +{$IFDEF TEST_DICT} +procedure test_dict_inflate(compr: Pointer; comprLen: LongInt; + uncompr: Pointer; uncomprLen: LongInt); +var err: Integer; + d_stream: z_stream; (* decompression stream *) +begin + StrCopy(PChar(uncompr), 'garbage'); + + d_stream.zalloc := NIL; + d_stream.zfree := NIL; + d_stream.opaque := NIL; + + d_stream.next_in := compr; + d_stream.avail_in := Integer(comprLen); + + err := inflateInit(d_stream); + CHECK_ERR(err, 'inflateInit'); + + d_stream.next_out := uncompr; + d_stream.avail_out := Integer(uncomprLen); + + while TRUE do + begin + err := inflate(d_stream, Z_NO_FLUSH); + if err = Z_STREAM_END then + break; + if err = Z_NEED_DICT then + begin + if d_stream.adler <> dictId then + EXIT_ERR('unexpected dictionary'); + err := inflateSetDictionary(d_stream, dictionary, StrLen(dictionary)); + end; + CHECK_ERR(err, 'inflate with dict'); + end; + + err := inflateEnd(d_stream); + CHECK_ERR(err, 'inflateEnd'); + + if StrComp(PChar(uncompr), hello) <> 0 then + EXIT_ERR('bad inflate with dict') + else + WriteLn('inflate with dictionary: ', PChar(uncompr)); +end; +{$ENDIF} + +var compr, uncompr: Pointer; + comprLen, uncomprLen: LongInt; + +begin + if zlibVersion^ <> ZLIB_VERSION[1] then + EXIT_ERR('Incompatible zlib version'); + + WriteLn('zlib version: ', zlibVersion); + WriteLn('zlib compile flags: ', Format('0x%x', [zlibCompileFlags])); + + comprLen := 10000 * SizeOf(Integer); (* don't overflow on MSDOS *) + uncomprLen := comprLen; + GetMem(compr, comprLen); + GetMem(uncompr, uncomprLen); + if (compr = NIL) or (uncompr = NIL) then + EXIT_ERR('Out of memory'); + (* compr and uncompr are cleared to avoid reading uninitialized + * data and to ensure that uncompr compresses well. + *) + FillChar(compr^, comprLen, 0); + FillChar(uncompr^, uncomprLen, 0); + + {$IFDEF TEST_COMPRESS} + WriteLn('** Testing compress'); + test_compress(compr, comprLen, uncompr, uncomprLen); + {$ENDIF} + + {$IFDEF TEST_GZIO} + WriteLn('** Testing gzio'); + if ParamCount >= 1 then + test_gzio(ParamStr(1), uncompr, uncomprLen) + else + test_gzio(TESTFILE, uncompr, uncomprLen); + {$ENDIF} + + {$IFDEF TEST_DEFLATE} + WriteLn('** Testing deflate with small buffers'); + test_deflate(compr, comprLen); + {$ENDIF} + {$IFDEF TEST_INFLATE} + WriteLn('** Testing inflate with small buffers'); + test_inflate(compr, comprLen, uncompr, uncomprLen); + {$ENDIF} + + {$IFDEF TEST_DEFLATE} + WriteLn('** Testing deflate with large buffers'); + test_large_deflate(compr, comprLen, uncompr, uncomprLen); + {$ENDIF} + {$IFDEF TEST_INFLATE} + WriteLn('** Testing inflate with large buffers'); + test_large_inflate(compr, comprLen, uncompr, uncomprLen); + {$ENDIF} + + {$IFDEF TEST_FLUSH} + WriteLn('** Testing deflate with full flush'); + test_flush(compr, comprLen); + {$ENDIF} + {$IFDEF TEST_SYNC} + WriteLn('** Testing inflateSync'); + test_sync(compr, comprLen, uncompr, uncomprLen); + {$ENDIF} + comprLen := uncomprLen; + + {$IFDEF TEST_DICT} + WriteLn('** Testing deflate and inflate with preset dictionary'); + test_dict_deflate(compr, comprLen); + test_dict_inflate(compr, comprLen, uncompr, uncomprLen); + {$ENDIF} + + FreeMem(compr, comprLen); + FreeMem(uncompr, uncomprLen); +end. diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/pascal/readme.txt b/software/scsi2sd-util/zlib-1.2.8/contrib/pascal/readme.txt new file mode 100644 index 0000000..60e87c8 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/pascal/readme.txt @@ -0,0 +1,76 @@ + +This directory contains a Pascal (Delphi, Kylix) interface to the +zlib data compression library. + + +Directory listing +================= + +zlibd32.mak makefile for Borland C++ +example.pas usage example of zlib +zlibpas.pas the Pascal interface to zlib +readme.txt this file + + +Compatibility notes +=================== + +- Although the name "zlib" would have been more normal for the + zlibpas unit, this name is already taken by Borland's ZLib unit. + This is somehow unfortunate, because that unit is not a genuine + interface to the full-fledged zlib functionality, but a suite of + class wrappers around zlib streams. Other essential features, + such as checksums, are missing. + It would have been more appropriate for that unit to have a name + like "ZStreams", or something similar. + +- The C and zlib-supplied types int, uInt, long, uLong, etc. are + translated directly into Pascal types of similar sizes (Integer, + LongInt, etc.), to avoid namespace pollution. In particular, + there is no conversion of unsigned int into a Pascal unsigned + integer. The Word type is non-portable and has the same size + (16 bits) both in a 16-bit and in a 32-bit environment, unlike + Integer. Even if there is a 32-bit Cardinal type, there is no + real need for unsigned int in zlib under a 32-bit environment. + +- Except for the callbacks, the zlib function interfaces are + assuming the calling convention normally used in Pascal + (__pascal for DOS and Windows16, __fastcall for Windows32). + Since the cdecl keyword is used, the old Turbo Pascal does + not work with this interface. + +- The gz* function interfaces are not translated, to avoid + interfacing problems with the C runtime library. Besides, + gzprintf(gzFile file, const char *format, ...) + cannot be translated into Pascal. + + +Legal issues +============ + +The zlibpas interface is: + Copyright (C) 1995-2003 Jean-loup Gailly and Mark Adler. + Copyright (C) 1998 by Bob Dellaca. + Copyright (C) 2003 by Cosmin Truta. + +The example program is: + Copyright (C) 1995-2003 by Jean-loup Gailly. + Copyright (C) 1998,1999,2000 by Jacques Nomssi Nzali. + Copyright (C) 2003 by Cosmin Truta. + + This software is provided 'as-is', without any express or implied + warranty. In no event will the author be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. + diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/pascal/zlibd32.mak b/software/scsi2sd-util/zlib-1.2.8/contrib/pascal/zlibd32.mak new file mode 100644 index 0000000..9bb00b7 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/pascal/zlibd32.mak @@ -0,0 +1,99 @@ +# Makefile for zlib +# For use with Delphi and C++ Builder under Win32 +# Updated for zlib 1.2.x by Cosmin Truta + +# ------------ Borland C++ ------------ + +# This project uses the Delphi (fastcall/register) calling convention: +LOC = -DZEXPORT=__fastcall -DZEXPORTVA=__cdecl + +CC = bcc32 +LD = bcc32 +AR = tlib +# do not use "-pr" in CFLAGS +CFLAGS = -a -d -k- -O2 $(LOC) +LDFLAGS = + + +# variables +ZLIB_LIB = zlib.lib + +OBJ1 = adler32.obj compress.obj crc32.obj deflate.obj gzclose.obj gzlib.obj gzread.obj +OBJ2 = gzwrite.obj infback.obj inffast.obj inflate.obj inftrees.obj trees.obj uncompr.obj zutil.obj +OBJP1 = +adler32.obj+compress.obj+crc32.obj+deflate.obj+gzclose.obj+gzlib.obj+gzread.obj +OBJP2 = +gzwrite.obj+infback.obj+inffast.obj+inflate.obj+inftrees.obj+trees.obj+uncompr.obj+zutil.obj + + +# targets +all: $(ZLIB_LIB) example.exe minigzip.exe + +.c.obj: + $(CC) -c $(CFLAGS) $*.c + +adler32.obj: adler32.c zlib.h zconf.h + +compress.obj: compress.c zlib.h zconf.h + +crc32.obj: crc32.c zlib.h zconf.h crc32.h + +deflate.obj: deflate.c deflate.h zutil.h zlib.h zconf.h + +gzclose.obj: gzclose.c zlib.h zconf.h gzguts.h + +gzlib.obj: gzlib.c zlib.h zconf.h gzguts.h + +gzread.obj: gzread.c zlib.h zconf.h gzguts.h + +gzwrite.obj: gzwrite.c zlib.h zconf.h gzguts.h + +infback.obj: infback.c zutil.h zlib.h zconf.h inftrees.h inflate.h \ + inffast.h inffixed.h + +inffast.obj: inffast.c zutil.h zlib.h zconf.h inftrees.h inflate.h \ + inffast.h + +inflate.obj: inflate.c zutil.h zlib.h zconf.h inftrees.h inflate.h \ + inffast.h inffixed.h + +inftrees.obj: inftrees.c zutil.h zlib.h zconf.h inftrees.h + +trees.obj: trees.c zutil.h zlib.h zconf.h deflate.h trees.h + +uncompr.obj: uncompr.c zlib.h zconf.h + +zutil.obj: zutil.c zutil.h zlib.h zconf.h + +example.obj: test/example.c zlib.h zconf.h + +minigzip.obj: test/minigzip.c zlib.h zconf.h + + +# For the sake of the old Borland make, +# the command line is cut to fit in the MS-DOS 128 byte limit: +$(ZLIB_LIB): $(OBJ1) $(OBJ2) + -del $(ZLIB_LIB) + $(AR) $(ZLIB_LIB) $(OBJP1) + $(AR) $(ZLIB_LIB) $(OBJP2) + + +# testing +test: example.exe minigzip.exe + example + echo hello world | minigzip | minigzip -d + +example.exe: example.obj $(ZLIB_LIB) + $(LD) $(LDFLAGS) example.obj $(ZLIB_LIB) + +minigzip.exe: minigzip.obj $(ZLIB_LIB) + $(LD) $(LDFLAGS) minigzip.obj $(ZLIB_LIB) + + +# cleanup +clean: + -del *.obj + -del *.exe + -del *.lib + -del *.tds + -del zlib.bak + -del foo.gz + diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/pascal/zlibpas.pas b/software/scsi2sd-util/zlib-1.2.8/contrib/pascal/zlibpas.pas new file mode 100644 index 0000000..e6a0782 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/pascal/zlibpas.pas @@ -0,0 +1,276 @@ +(* zlibpas -- Pascal interface to the zlib data compression library + * + * Copyright (C) 2003 Cosmin Truta. + * Derived from original sources by Bob Dellaca. + * For conditions of distribution and use, see copyright notice in readme.txt + *) + +unit zlibpas; + +interface + +const + ZLIB_VERSION = '1.2.8'; + ZLIB_VERNUM = $1280; + +type + alloc_func = function(opaque: Pointer; items, size: Integer): Pointer; + cdecl; + free_func = procedure(opaque, address: Pointer); + cdecl; + + in_func = function(opaque: Pointer; var buf: PByte): Integer; + cdecl; + out_func = function(opaque: Pointer; buf: PByte; size: Integer): Integer; + cdecl; + + z_streamp = ^z_stream; + z_stream = packed record + next_in: PChar; (* next input byte *) + avail_in: Integer; (* number of bytes available at next_in *) + total_in: LongInt; (* total nb of input bytes read so far *) + + next_out: PChar; (* next output byte should be put there *) + avail_out: Integer; (* remaining free space at next_out *) + total_out: LongInt; (* total nb of bytes output so far *) + + msg: PChar; (* last error message, NULL if no error *) + state: Pointer; (* not visible by applications *) + + zalloc: alloc_func; (* used to allocate the internal state *) + zfree: free_func; (* used to free the internal state *) + opaque: Pointer; (* private data object passed to zalloc and zfree *) + + data_type: Integer; (* best guess about the data type: ascii or binary *) + adler: LongInt; (* adler32 value of the uncompressed data *) + reserved: LongInt; (* reserved for future use *) + end; + + gz_headerp = ^gz_header; + gz_header = packed record + text: Integer; (* true if compressed data believed to be text *) + time: LongInt; (* modification time *) + xflags: Integer; (* extra flags (not used when writing a gzip file) *) + os: Integer; (* operating system *) + extra: PChar; (* pointer to extra field or Z_NULL if none *) + extra_len: Integer; (* extra field length (valid if extra != Z_NULL) *) + extra_max: Integer; (* space at extra (only when reading header) *) + name: PChar; (* pointer to zero-terminated file name or Z_NULL *) + name_max: Integer; (* space at name (only when reading header) *) + comment: PChar; (* pointer to zero-terminated comment or Z_NULL *) + comm_max: Integer; (* space at comment (only when reading header) *) + hcrc: Integer; (* true if there was or will be a header crc *) + done: Integer; (* true when done reading gzip header *) + end; + +(* constants *) +const + Z_NO_FLUSH = 0; + Z_PARTIAL_FLUSH = 1; + Z_SYNC_FLUSH = 2; + Z_FULL_FLUSH = 3; + Z_FINISH = 4; + Z_BLOCK = 5; + Z_TREES = 6; + + Z_OK = 0; + Z_STREAM_END = 1; + Z_NEED_DICT = 2; + Z_ERRNO = -1; + Z_STREAM_ERROR = -2; + Z_DATA_ERROR = -3; + Z_MEM_ERROR = -4; + Z_BUF_ERROR = -5; + Z_VERSION_ERROR = -6; + + Z_NO_COMPRESSION = 0; + Z_BEST_SPEED = 1; + Z_BEST_COMPRESSION = 9; + Z_DEFAULT_COMPRESSION = -1; + + Z_FILTERED = 1; + Z_HUFFMAN_ONLY = 2; + Z_RLE = 3; + Z_FIXED = 4; + Z_DEFAULT_STRATEGY = 0; + + Z_BINARY = 0; + Z_TEXT = 1; + Z_ASCII = 1; + Z_UNKNOWN = 2; + + Z_DEFLATED = 8; + +(* basic functions *) +function zlibVersion: PChar; +function deflateInit(var strm: z_stream; level: Integer): Integer; +function deflate(var strm: z_stream; flush: Integer): Integer; +function deflateEnd(var strm: z_stream): Integer; +function inflateInit(var strm: z_stream): Integer; +function inflate(var strm: z_stream; flush: Integer): Integer; +function inflateEnd(var strm: z_stream): Integer; + +(* advanced functions *) +function deflateInit2(var strm: z_stream; level, method, windowBits, + memLevel, strategy: Integer): Integer; +function deflateSetDictionary(var strm: z_stream; const dictionary: PChar; + dictLength: Integer): Integer; +function deflateCopy(var dest, source: z_stream): Integer; +function deflateReset(var strm: z_stream): Integer; +function deflateParams(var strm: z_stream; level, strategy: Integer): Integer; +function deflateTune(var strm: z_stream; good_length, max_lazy, nice_length, max_chain: Integer): Integer; +function deflateBound(var strm: z_stream; sourceLen: LongInt): LongInt; +function deflatePending(var strm: z_stream; var pending: Integer; var bits: Integer): Integer; +function deflatePrime(var strm: z_stream; bits, value: Integer): Integer; +function deflateSetHeader(var strm: z_stream; head: gz_header): Integer; +function inflateInit2(var strm: z_stream; windowBits: Integer): Integer; +function inflateSetDictionary(var strm: z_stream; const dictionary: PChar; + dictLength: Integer): Integer; +function inflateSync(var strm: z_stream): Integer; +function inflateCopy(var dest, source: z_stream): Integer; +function inflateReset(var strm: z_stream): Integer; +function inflateReset2(var strm: z_stream; windowBits: Integer): Integer; +function inflatePrime(var strm: z_stream; bits, value: Integer): Integer; +function inflateMark(var strm: z_stream): LongInt; +function inflateGetHeader(var strm: z_stream; var head: gz_header): Integer; +function inflateBackInit(var strm: z_stream; + windowBits: Integer; window: PChar): Integer; +function inflateBack(var strm: z_stream; in_fn: in_func; in_desc: Pointer; + out_fn: out_func; out_desc: Pointer): Integer; +function inflateBackEnd(var strm: z_stream): Integer; +function zlibCompileFlags: LongInt; + +(* utility functions *) +function compress(dest: PChar; var destLen: LongInt; + const source: PChar; sourceLen: LongInt): Integer; +function compress2(dest: PChar; var destLen: LongInt; + const source: PChar; sourceLen: LongInt; + level: Integer): Integer; +function compressBound(sourceLen: LongInt): LongInt; +function uncompress(dest: PChar; var destLen: LongInt; + const source: PChar; sourceLen: LongInt): Integer; + +(* checksum functions *) +function adler32(adler: LongInt; const buf: PChar; len: Integer): LongInt; +function adler32_combine(adler1, adler2, len2: LongInt): LongInt; +function crc32(crc: LongInt; const buf: PChar; len: Integer): LongInt; +function crc32_combine(crc1, crc2, len2: LongInt): LongInt; + +(* various hacks, don't look :) *) +function deflateInit_(var strm: z_stream; level: Integer; + const version: PChar; stream_size: Integer): Integer; +function inflateInit_(var strm: z_stream; const version: PChar; + stream_size: Integer): Integer; +function deflateInit2_(var strm: z_stream; + level, method, windowBits, memLevel, strategy: Integer; + const version: PChar; stream_size: Integer): Integer; +function inflateInit2_(var strm: z_stream; windowBits: Integer; + const version: PChar; stream_size: Integer): Integer; +function inflateBackInit_(var strm: z_stream; + windowBits: Integer; window: PChar; + const version: PChar; stream_size: Integer): Integer; + + +implementation + +{$L adler32.obj} +{$L compress.obj} +{$L crc32.obj} +{$L deflate.obj} +{$L infback.obj} +{$L inffast.obj} +{$L inflate.obj} +{$L inftrees.obj} +{$L trees.obj} +{$L uncompr.obj} +{$L zutil.obj} + +function adler32; external; +function adler32_combine; external; +function compress; external; +function compress2; external; +function compressBound; external; +function crc32; external; +function crc32_combine; external; +function deflate; external; +function deflateBound; external; +function deflateCopy; external; +function deflateEnd; external; +function deflateInit_; external; +function deflateInit2_; external; +function deflateParams; external; +function deflatePending; external; +function deflatePrime; external; +function deflateReset; external; +function deflateSetDictionary; external; +function deflateSetHeader; external; +function deflateTune; external; +function inflate; external; +function inflateBack; external; +function inflateBackEnd; external; +function inflateBackInit_; external; +function inflateCopy; external; +function inflateEnd; external; +function inflateGetHeader; external; +function inflateInit_; external; +function inflateInit2_; external; +function inflateMark; external; +function inflatePrime; external; +function inflateReset; external; +function inflateReset2; external; +function inflateSetDictionary; external; +function inflateSync; external; +function uncompress; external; +function zlibCompileFlags; external; +function zlibVersion; external; + +function deflateInit(var strm: z_stream; level: Integer): Integer; +begin + Result := deflateInit_(strm, level, ZLIB_VERSION, sizeof(z_stream)); +end; + +function deflateInit2(var strm: z_stream; level, method, windowBits, memLevel, + strategy: Integer): Integer; +begin + Result := deflateInit2_(strm, level, method, windowBits, memLevel, strategy, + ZLIB_VERSION, sizeof(z_stream)); +end; + +function inflateInit(var strm: z_stream): Integer; +begin + Result := inflateInit_(strm, ZLIB_VERSION, sizeof(z_stream)); +end; + +function inflateInit2(var strm: z_stream; windowBits: Integer): Integer; +begin + Result := inflateInit2_(strm, windowBits, ZLIB_VERSION, sizeof(z_stream)); +end; + +function inflateBackInit(var strm: z_stream; + windowBits: Integer; window: PChar): Integer; +begin + Result := inflateBackInit_(strm, windowBits, window, + ZLIB_VERSION, sizeof(z_stream)); +end; + +function _malloc(Size: Integer): Pointer; cdecl; +begin + GetMem(Result, Size); +end; + +procedure _free(Block: Pointer); cdecl; +begin + FreeMem(Block); +end; + +procedure _memset(P: Pointer; B: Byte; count: Integer); cdecl; +begin + FillChar(P^, count, B); +end; + +procedure _memcpy(dest, source: Pointer; count: Integer); cdecl; +begin + Move(source^, dest^, count); +end; + +end. diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/puff/Makefile b/software/scsi2sd-util/zlib-1.2.8/contrib/puff/Makefile new file mode 100644 index 0000000..0e2594c --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/puff/Makefile @@ -0,0 +1,42 @@ +CFLAGS=-O + +puff: puff.o pufftest.o + +puff.o: puff.h + +pufftest.o: puff.h + +test: puff + puff zeros.raw + +puft: puff.c puff.h pufftest.o + cc -fprofile-arcs -ftest-coverage -o puft puff.c pufftest.o + +# puff full coverage test (should say 100%) +cov: puft + @rm -f *.gcov *.gcda + @puft -w zeros.raw 2>&1 | cat > /dev/null + @echo '04' | xxd -r -p | puft 2> /dev/null || test $$? -eq 2 + @echo '00' | xxd -r -p | puft 2> /dev/null || test $$? -eq 2 + @echo '00 00 00 00 00' | xxd -r -p | puft 2> /dev/null || test $$? -eq 254 + @echo '00 01 00 fe ff' | xxd -r -p | puft 2> /dev/null || test $$? -eq 2 + @echo '01 01 00 fe ff 0a' | xxd -r -p | puft -f 2>&1 | cat > /dev/null + @echo '02 7e ff ff' | xxd -r -p | puft 2> /dev/null || test $$? -eq 246 + @echo '02' | xxd -r -p | puft 2> /dev/null || test $$? -eq 2 + @echo '04 80 49 92 24 49 92 24 0f b4 ff ff c3 04' | xxd -r -p | puft 2> /dev/null || test $$? -eq 2 + @echo '04 80 49 92 24 49 92 24 71 ff ff 93 11 00' | xxd -r -p | puft 2> /dev/null || test $$? -eq 249 + @echo '04 c0 81 08 00 00 00 00 20 7f eb 0b 00 00' | xxd -r -p | puft 2> /dev/null || test $$? -eq 246 + @echo '0b 00 00' | xxd -r -p | puft -f 2>&1 | cat > /dev/null + @echo '1a 07' | xxd -r -p | puft 2> /dev/null || test $$? -eq 246 + @echo '0c c0 81 00 00 00 00 00 90 ff 6b 04' | xxd -r -p | puft 2> /dev/null || test $$? -eq 245 + @puft -f zeros.raw 2>&1 | cat > /dev/null + @echo 'fc 00 00' | xxd -r -p | puft 2> /dev/null || test $$? -eq 253 + @echo '04 00 fe ff' | xxd -r -p | puft 2> /dev/null || test $$? -eq 252 + @echo '04 00 24 49' | xxd -r -p | puft 2> /dev/null || test $$? -eq 251 + @echo '04 80 49 92 24 49 92 24 0f b4 ff ff c3 84' | xxd -r -p | puft 2> /dev/null || test $$? -eq 248 + @echo '04 00 24 e9 ff ff' | xxd -r -p | puft 2> /dev/null || test $$? -eq 250 + @echo '04 00 24 e9 ff 6d' | xxd -r -p | puft 2> /dev/null || test $$? -eq 247 + @gcov -n puff.c + +clean: + rm -f puff puft *.o *.gc* diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/puff/README b/software/scsi2sd-util/zlib-1.2.8/contrib/puff/README new file mode 100644 index 0000000..bbc4cb5 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/puff/README @@ -0,0 +1,63 @@ +Puff -- A Simple Inflate +3 Mar 2003 +Mark Adler +madler@alumni.caltech.edu + +What this is -- + +puff.c provides the routine puff() to decompress the deflate data format. It +does so more slowly than zlib, but the code is about one-fifth the size of the +inflate code in zlib, and written to be very easy to read. + +Why I wrote this -- + +puff.c was written to document the deflate format unambiguously, by virtue of +being working C code. It is meant to supplement RFC 1951, which formally +describes the deflate format. I have received many questions on details of the +deflate format, and I hope that reading this code will answer those questions. +puff.c is heavily commented with details of the deflate format, especially +those little nooks and cranies of the format that might not be obvious from a +specification. + +puff.c may also be useful in applications where code size or memory usage is a +very limited resource, and speed is not as important. + +How to use it -- + +Well, most likely you should just be reading puff.c and using zlib for actual +applications, but if you must ... + +Include puff.h in your code, which provides this prototype: + +int puff(unsigned char *dest, /* pointer to destination pointer */ + unsigned long *destlen, /* amount of output space */ + unsigned char *source, /* pointer to source data pointer */ + unsigned long *sourcelen); /* amount of input available */ + +Then you can call puff() to decompress a deflate stream that is in memory in +its entirety at source, to a sufficiently sized block of memory for the +decompressed data at dest. puff() is the only external symbol in puff.c The +only C library functions that puff.c needs are setjmp() and longjmp(), which +are used to simplify error checking in the code to improve readabilty. puff.c +does no memory allocation, and uses less than 2K bytes off of the stack. + +If destlen is not enough space for the uncompressed data, then inflate will +return an error without writing more than destlen bytes. Note that this means +that in order to decompress the deflate data successfully, you need to know +the size of the uncompressed data ahead of time. + +If needed, puff() can determine the size of the uncompressed data with no +output space. This is done by passing dest equal to (unsigned char *)0. Then +the initial value of *destlen is ignored and *destlen is set to the length of +the uncompressed data. So if the size of the uncompressed data is not known, +then two passes of puff() can be used--first to determine the size, and second +to do the actual inflation after allocating the appropriate memory. Not +pretty, but it works. (This is one of the reasons you should be using zlib.) + +The deflate format is self-terminating. If the deflate stream does not end +in *sourcelen bytes, puff() will return an error without reading at or past +endsource. + +On return, *sourcelen is updated to the amount of input data consumed, and +*destlen is updated to the size of the uncompressed data. See the comments +in puff.c for the possible return codes for puff(). diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/puff/puff.c b/software/scsi2sd-util/zlib-1.2.8/contrib/puff/puff.c new file mode 100644 index 0000000..ba58483 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/puff/puff.c @@ -0,0 +1,840 @@ +/* + * puff.c + * Copyright (C) 2002-2013 Mark Adler + * For conditions of distribution and use, see copyright notice in puff.h + * version 2.3, 21 Jan 2013 + * + * puff.c is a simple inflate written to be an unambiguous way to specify the + * deflate format. It is not written for speed but rather simplicity. As a + * side benefit, this code might actually be useful when small code is more + * important than speed, such as bootstrap applications. For typical deflate + * data, zlib's inflate() is about four times as fast as puff(). zlib's + * inflate compiles to around 20K on my machine, whereas puff.c compiles to + * around 4K on my machine (a PowerPC using GNU cc). If the faster decode() + * function here is used, then puff() is only twice as slow as zlib's + * inflate(). + * + * All dynamically allocated memory comes from the stack. The stack required + * is less than 2K bytes. This code is compatible with 16-bit int's and + * assumes that long's are at least 32 bits. puff.c uses the short data type, + * assumed to be 16 bits, for arrays in order to to conserve memory. The code + * works whether integers are stored big endian or little endian. + * + * In the comments below are "Format notes" that describe the inflate process + * and document some of the less obvious aspects of the format. This source + * code is meant to supplement RFC 1951, which formally describes the deflate + * format: + * + * http://www.zlib.org/rfc-deflate.html + */ + +/* + * Change history: + * + * 1.0 10 Feb 2002 - First version + * 1.1 17 Feb 2002 - Clarifications of some comments and notes + * - Update puff() dest and source pointers on negative + * errors to facilitate debugging deflators + * - Remove longest from struct huffman -- not needed + * - Simplify offs[] index in construct() + * - Add input size and checking, using longjmp() to + * maintain easy readability + * - Use short data type for large arrays + * - Use pointers instead of long to specify source and + * destination sizes to avoid arbitrary 4 GB limits + * 1.2 17 Mar 2002 - Add faster version of decode(), doubles speed (!), + * but leave simple version for readabilty + * - Make sure invalid distances detected if pointers + * are 16 bits + * - Fix fixed codes table error + * - Provide a scanning mode for determining size of + * uncompressed data + * 1.3 20 Mar 2002 - Go back to lengths for puff() parameters [Gailly] + * - Add a puff.h file for the interface + * - Add braces in puff() for else do [Gailly] + * - Use indexes instead of pointers for readability + * 1.4 31 Mar 2002 - Simplify construct() code set check + * - Fix some comments + * - Add FIXLCODES #define + * 1.5 6 Apr 2002 - Minor comment fixes + * 1.6 7 Aug 2002 - Minor format changes + * 1.7 3 Mar 2003 - Added test code for distribution + * - Added zlib-like license + * 1.8 9 Jan 2004 - Added some comments on no distance codes case + * 1.9 21 Feb 2008 - Fix bug on 16-bit integer architectures [Pohland] + * - Catch missing end-of-block symbol error + * 2.0 25 Jul 2008 - Add #define to permit distance too far back + * - Add option in TEST code for puff to write the data + * - Add option in TEST code to skip input bytes + * - Allow TEST code to read from piped stdin + * 2.1 4 Apr 2010 - Avoid variable initialization for happier compilers + * - Avoid unsigned comparisons for even happier compilers + * 2.2 25 Apr 2010 - Fix bug in variable initializations [Oberhumer] + * - Add const where appropriate [Oberhumer] + * - Split if's and ?'s for coverage testing + * - Break out test code to separate file + * - Move NIL to puff.h + * - Allow incomplete code only if single code length is 1 + * - Add full code coverage test to Makefile + * 2.3 21 Jan 2013 - Check for invalid code length codes in dynamic blocks + */ + +#include /* for setjmp(), longjmp(), and jmp_buf */ +#include "puff.h" /* prototype for puff() */ + +#define local static /* for local function definitions */ + +/* + * Maximums for allocations and loops. It is not useful to change these -- + * they are fixed by the deflate format. + */ +#define MAXBITS 15 /* maximum bits in a code */ +#define MAXLCODES 286 /* maximum number of literal/length codes */ +#define MAXDCODES 30 /* maximum number of distance codes */ +#define MAXCODES (MAXLCODES+MAXDCODES) /* maximum codes lengths to read */ +#define FIXLCODES 288 /* number of fixed literal/length codes */ + +/* input and output state */ +struct state { + /* output state */ + unsigned char *out; /* output buffer */ + unsigned long outlen; /* available space at out */ + unsigned long outcnt; /* bytes written to out so far */ + + /* input state */ + const unsigned char *in; /* input buffer */ + unsigned long inlen; /* available input at in */ + unsigned long incnt; /* bytes read so far */ + int bitbuf; /* bit buffer */ + int bitcnt; /* number of bits in bit buffer */ + + /* input limit error return state for bits() and decode() */ + jmp_buf env; +}; + +/* + * Return need bits from the input stream. This always leaves less than + * eight bits in the buffer. bits() works properly for need == 0. + * + * Format notes: + * + * - Bits are stored in bytes from the least significant bit to the most + * significant bit. Therefore bits are dropped from the bottom of the bit + * buffer, using shift right, and new bytes are appended to the top of the + * bit buffer, using shift left. + */ +local int bits(struct state *s, int need) +{ + long val; /* bit accumulator (can use up to 20 bits) */ + + /* load at least need bits into val */ + val = s->bitbuf; + while (s->bitcnt < need) { + if (s->incnt == s->inlen) + longjmp(s->env, 1); /* out of input */ + val |= (long)(s->in[s->incnt++]) << s->bitcnt; /* load eight bits */ + s->bitcnt += 8; + } + + /* drop need bits and update buffer, always zero to seven bits left */ + s->bitbuf = (int)(val >> need); + s->bitcnt -= need; + + /* return need bits, zeroing the bits above that */ + return (int)(val & ((1L << need) - 1)); +} + +/* + * Process a stored block. + * + * Format notes: + * + * - After the two-bit stored block type (00), the stored block length and + * stored bytes are byte-aligned for fast copying. Therefore any leftover + * bits in the byte that has the last bit of the type, as many as seven, are + * discarded. The value of the discarded bits are not defined and should not + * be checked against any expectation. + * + * - The second inverted copy of the stored block length does not have to be + * checked, but it's probably a good idea to do so anyway. + * + * - A stored block can have zero length. This is sometimes used to byte-align + * subsets of the compressed data for random access or partial recovery. + */ +local int stored(struct state *s) +{ + unsigned len; /* length of stored block */ + + /* discard leftover bits from current byte (assumes s->bitcnt < 8) */ + s->bitbuf = 0; + s->bitcnt = 0; + + /* get length and check against its one's complement */ + if (s->incnt + 4 > s->inlen) + return 2; /* not enough input */ + len = s->in[s->incnt++]; + len |= s->in[s->incnt++] << 8; + if (s->in[s->incnt++] != (~len & 0xff) || + s->in[s->incnt++] != ((~len >> 8) & 0xff)) + return -2; /* didn't match complement! */ + + /* copy len bytes from in to out */ + if (s->incnt + len > s->inlen) + return 2; /* not enough input */ + if (s->out != NIL) { + if (s->outcnt + len > s->outlen) + return 1; /* not enough output space */ + while (len--) + s->out[s->outcnt++] = s->in[s->incnt++]; + } + else { /* just scanning */ + s->outcnt += len; + s->incnt += len; + } + + /* done with a valid stored block */ + return 0; +} + +/* + * Huffman code decoding tables. count[1..MAXBITS] is the number of symbols of + * each length, which for a canonical code are stepped through in order. + * symbol[] are the symbol values in canonical order, where the number of + * entries is the sum of the counts in count[]. The decoding process can be + * seen in the function decode() below. + */ +struct huffman { + short *count; /* number of symbols of each length */ + short *symbol; /* canonically ordered symbols */ +}; + +/* + * Decode a code from the stream s using huffman table h. Return the symbol or + * a negative value if there is an error. If all of the lengths are zero, i.e. + * an empty code, or if the code is incomplete and an invalid code is received, + * then -10 is returned after reading MAXBITS bits. + * + * Format notes: + * + * - The codes as stored in the compressed data are bit-reversed relative to + * a simple integer ordering of codes of the same lengths. Hence below the + * bits are pulled from the compressed data one at a time and used to + * build the code value reversed from what is in the stream in order to + * permit simple integer comparisons for decoding. A table-based decoding + * scheme (as used in zlib) does not need to do this reversal. + * + * - The first code for the shortest length is all zeros. Subsequent codes of + * the same length are simply integer increments of the previous code. When + * moving up a length, a zero bit is appended to the code. For a complete + * code, the last code of the longest length will be all ones. + * + * - Incomplete codes are handled by this decoder, since they are permitted + * in the deflate format. See the format notes for fixed() and dynamic(). + */ +#ifdef SLOW +local int decode(struct state *s, const struct huffman *h) +{ + int len; /* current number of bits in code */ + int code; /* len bits being decoded */ + int first; /* first code of length len */ + int count; /* number of codes of length len */ + int index; /* index of first code of length len in symbol table */ + + code = first = index = 0; + for (len = 1; len <= MAXBITS; len++) { + code |= bits(s, 1); /* get next bit */ + count = h->count[len]; + if (code - count < first) /* if length len, return symbol */ + return h->symbol[index + (code - first)]; + index += count; /* else update for next length */ + first += count; + first <<= 1; + code <<= 1; + } + return -10; /* ran out of codes */ +} + +/* + * A faster version of decode() for real applications of this code. It's not + * as readable, but it makes puff() twice as fast. And it only makes the code + * a few percent larger. + */ +#else /* !SLOW */ +local int decode(struct state *s, const struct huffman *h) +{ + int len; /* current number of bits in code */ + int code; /* len bits being decoded */ + int first; /* first code of length len */ + int count; /* number of codes of length len */ + int index; /* index of first code of length len in symbol table */ + int bitbuf; /* bits from stream */ + int left; /* bits left in next or left to process */ + short *next; /* next number of codes */ + + bitbuf = s->bitbuf; + left = s->bitcnt; + code = first = index = 0; + len = 1; + next = h->count + 1; + while (1) { + while (left--) { + code |= bitbuf & 1; + bitbuf >>= 1; + count = *next++; + if (code - count < first) { /* if length len, return symbol */ + s->bitbuf = bitbuf; + s->bitcnt = (s->bitcnt - len) & 7; + return h->symbol[index + (code - first)]; + } + index += count; /* else update for next length */ + first += count; + first <<= 1; + code <<= 1; + len++; + } + left = (MAXBITS+1) - len; + if (left == 0) + break; + if (s->incnt == s->inlen) + longjmp(s->env, 1); /* out of input */ + bitbuf = s->in[s->incnt++]; + if (left > 8) + left = 8; + } + return -10; /* ran out of codes */ +} +#endif /* SLOW */ + +/* + * Given the list of code lengths length[0..n-1] representing a canonical + * Huffman code for n symbols, construct the tables required to decode those + * codes. Those tables are the number of codes of each length, and the symbols + * sorted by length, retaining their original order within each length. The + * return value is zero for a complete code set, negative for an over- + * subscribed code set, and positive for an incomplete code set. The tables + * can be used if the return value is zero or positive, but they cannot be used + * if the return value is negative. If the return value is zero, it is not + * possible for decode() using that table to return an error--any stream of + * enough bits will resolve to a symbol. If the return value is positive, then + * it is possible for decode() using that table to return an error for received + * codes past the end of the incomplete lengths. + * + * Not used by decode(), but used for error checking, h->count[0] is the number + * of the n symbols not in the code. So n - h->count[0] is the number of + * codes. This is useful for checking for incomplete codes that have more than + * one symbol, which is an error in a dynamic block. + * + * Assumption: for all i in 0..n-1, 0 <= length[i] <= MAXBITS + * This is assured by the construction of the length arrays in dynamic() and + * fixed() and is not verified by construct(). + * + * Format notes: + * + * - Permitted and expected examples of incomplete codes are one of the fixed + * codes and any code with a single symbol which in deflate is coded as one + * bit instead of zero bits. See the format notes for fixed() and dynamic(). + * + * - Within a given code length, the symbols are kept in ascending order for + * the code bits definition. + */ +local int construct(struct huffman *h, const short *length, int n) +{ + int symbol; /* current symbol when stepping through length[] */ + int len; /* current length when stepping through h->count[] */ + int left; /* number of possible codes left of current length */ + short offs[MAXBITS+1]; /* offsets in symbol table for each length */ + + /* count number of codes of each length */ + for (len = 0; len <= MAXBITS; len++) + h->count[len] = 0; + for (symbol = 0; symbol < n; symbol++) + (h->count[length[symbol]])++; /* assumes lengths are within bounds */ + if (h->count[0] == n) /* no codes! */ + return 0; /* complete, but decode() will fail */ + + /* check for an over-subscribed or incomplete set of lengths */ + left = 1; /* one possible code of zero length */ + for (len = 1; len <= MAXBITS; len++) { + left <<= 1; /* one more bit, double codes left */ + left -= h->count[len]; /* deduct count from possible codes */ + if (left < 0) + return left; /* over-subscribed--return negative */ + } /* left > 0 means incomplete */ + + /* generate offsets into symbol table for each length for sorting */ + offs[1] = 0; + for (len = 1; len < MAXBITS; len++) + offs[len + 1] = offs[len] + h->count[len]; + + /* + * put symbols in table sorted by length, by symbol order within each + * length + */ + for (symbol = 0; symbol < n; symbol++) + if (length[symbol] != 0) + h->symbol[offs[length[symbol]]++] = symbol; + + /* return zero for complete set, positive for incomplete set */ + return left; +} + +/* + * Decode literal/length and distance codes until an end-of-block code. + * + * Format notes: + * + * - Compressed data that is after the block type if fixed or after the code + * description if dynamic is a combination of literals and length/distance + * pairs terminated by and end-of-block code. Literals are simply Huffman + * coded bytes. A length/distance pair is a coded length followed by a + * coded distance to represent a string that occurs earlier in the + * uncompressed data that occurs again at the current location. + * + * - Literals, lengths, and the end-of-block code are combined into a single + * code of up to 286 symbols. They are 256 literals (0..255), 29 length + * symbols (257..285), and the end-of-block symbol (256). + * + * - There are 256 possible lengths (3..258), and so 29 symbols are not enough + * to represent all of those. Lengths 3..10 and 258 are in fact represented + * by just a length symbol. Lengths 11..257 are represented as a symbol and + * some number of extra bits that are added as an integer to the base length + * of the length symbol. The number of extra bits is determined by the base + * length symbol. These are in the static arrays below, lens[] for the base + * lengths and lext[] for the corresponding number of extra bits. + * + * - The reason that 258 gets its own symbol is that the longest length is used + * often in highly redundant files. Note that 258 can also be coded as the + * base value 227 plus the maximum extra value of 31. While a good deflate + * should never do this, it is not an error, and should be decoded properly. + * + * - If a length is decoded, including its extra bits if any, then it is + * followed a distance code. There are up to 30 distance symbols. Again + * there are many more possible distances (1..32768), so extra bits are added + * to a base value represented by the symbol. The distances 1..4 get their + * own symbol, but the rest require extra bits. The base distances and + * corresponding number of extra bits are below in the static arrays dist[] + * and dext[]. + * + * - Literal bytes are simply written to the output. A length/distance pair is + * an instruction to copy previously uncompressed bytes to the output. The + * copy is from distance bytes back in the output stream, copying for length + * bytes. + * + * - Distances pointing before the beginning of the output data are not + * permitted. + * + * - Overlapped copies, where the length is greater than the distance, are + * allowed and common. For example, a distance of one and a length of 258 + * simply copies the last byte 258 times. A distance of four and a length of + * twelve copies the last four bytes three times. A simple forward copy + * ignoring whether the length is greater than the distance or not implements + * this correctly. You should not use memcpy() since its behavior is not + * defined for overlapped arrays. You should not use memmove() or bcopy() + * since though their behavior -is- defined for overlapping arrays, it is + * defined to do the wrong thing in this case. + */ +local int codes(struct state *s, + const struct huffman *lencode, + const struct huffman *distcode) +{ + int symbol; /* decoded symbol */ + int len; /* length for copy */ + unsigned dist; /* distance for copy */ + static const short lens[29] = { /* Size base for length codes 257..285 */ + 3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 15, 17, 19, 23, 27, 31, + 35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258}; + static const short lext[29] = { /* Extra bits for length codes 257..285 */ + 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 2, 2, 2, 2, + 3, 3, 3, 3, 4, 4, 4, 4, 5, 5, 5, 5, 0}; + static const short dists[30] = { /* Offset base for distance codes 0..29 */ + 1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193, + 257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145, + 8193, 12289, 16385, 24577}; + static const short dext[30] = { /* Extra bits for distance codes 0..29 */ + 0, 0, 0, 0, 1, 1, 2, 2, 3, 3, 4, 4, 5, 5, 6, 6, + 7, 7, 8, 8, 9, 9, 10, 10, 11, 11, + 12, 12, 13, 13}; + + /* decode literals and length/distance pairs */ + do { + symbol = decode(s, lencode); + if (symbol < 0) + return symbol; /* invalid symbol */ + if (symbol < 256) { /* literal: symbol is the byte */ + /* write out the literal */ + if (s->out != NIL) { + if (s->outcnt == s->outlen) + return 1; + s->out[s->outcnt] = symbol; + } + s->outcnt++; + } + else if (symbol > 256) { /* length */ + /* get and compute length */ + symbol -= 257; + if (symbol >= 29) + return -10; /* invalid fixed code */ + len = lens[symbol] + bits(s, lext[symbol]); + + /* get and check distance */ + symbol = decode(s, distcode); + if (symbol < 0) + return symbol; /* invalid symbol */ + dist = dists[symbol] + bits(s, dext[symbol]); +#ifndef INFLATE_ALLOW_INVALID_DISTANCE_TOOFAR_ARRR + if (dist > s->outcnt) + return -11; /* distance too far back */ +#endif + + /* copy length bytes from distance bytes back */ + if (s->out != NIL) { + if (s->outcnt + len > s->outlen) + return 1; + while (len--) { + s->out[s->outcnt] = +#ifdef INFLATE_ALLOW_INVALID_DISTANCE_TOOFAR_ARRR + dist > s->outcnt ? + 0 : +#endif + s->out[s->outcnt - dist]; + s->outcnt++; + } + } + else + s->outcnt += len; + } + } while (symbol != 256); /* end of block symbol */ + + /* done with a valid fixed or dynamic block */ + return 0; +} + +/* + * Process a fixed codes block. + * + * Format notes: + * + * - This block type can be useful for compressing small amounts of data for + * which the size of the code descriptions in a dynamic block exceeds the + * benefit of custom codes for that block. For fixed codes, no bits are + * spent on code descriptions. Instead the code lengths for literal/length + * codes and distance codes are fixed. The specific lengths for each symbol + * can be seen in the "for" loops below. + * + * - The literal/length code is complete, but has two symbols that are invalid + * and should result in an error if received. This cannot be implemented + * simply as an incomplete code since those two symbols are in the "middle" + * of the code. They are eight bits long and the longest literal/length\ + * code is nine bits. Therefore the code must be constructed with those + * symbols, and the invalid symbols must be detected after decoding. + * + * - The fixed distance codes also have two invalid symbols that should result + * in an error if received. Since all of the distance codes are the same + * length, this can be implemented as an incomplete code. Then the invalid + * codes are detected while decoding. + */ +local int fixed(struct state *s) +{ + static int virgin = 1; + static short lencnt[MAXBITS+1], lensym[FIXLCODES]; + static short distcnt[MAXBITS+1], distsym[MAXDCODES]; + static struct huffman lencode, distcode; + + /* build fixed huffman tables if first call (may not be thread safe) */ + if (virgin) { + int symbol; + short lengths[FIXLCODES]; + + /* construct lencode and distcode */ + lencode.count = lencnt; + lencode.symbol = lensym; + distcode.count = distcnt; + distcode.symbol = distsym; + + /* literal/length table */ + for (symbol = 0; symbol < 144; symbol++) + lengths[symbol] = 8; + for (; symbol < 256; symbol++) + lengths[symbol] = 9; + for (; symbol < 280; symbol++) + lengths[symbol] = 7; + for (; symbol < FIXLCODES; symbol++) + lengths[symbol] = 8; + construct(&lencode, lengths, FIXLCODES); + + /* distance table */ + for (symbol = 0; symbol < MAXDCODES; symbol++) + lengths[symbol] = 5; + construct(&distcode, lengths, MAXDCODES); + + /* do this just once */ + virgin = 0; + } + + /* decode data until end-of-block code */ + return codes(s, &lencode, &distcode); +} + +/* + * Process a dynamic codes block. + * + * Format notes: + * + * - A dynamic block starts with a description of the literal/length and + * distance codes for that block. New dynamic blocks allow the compressor to + * rapidly adapt to changing data with new codes optimized for that data. + * + * - The codes used by the deflate format are "canonical", which means that + * the actual bits of the codes are generated in an unambiguous way simply + * from the number of bits in each code. Therefore the code descriptions + * are simply a list of code lengths for each symbol. + * + * - The code lengths are stored in order for the symbols, so lengths are + * provided for each of the literal/length symbols, and for each of the + * distance symbols. + * + * - If a symbol is not used in the block, this is represented by a zero as + * as the code length. This does not mean a zero-length code, but rather + * that no code should be created for this symbol. There is no way in the + * deflate format to represent a zero-length code. + * + * - The maximum number of bits in a code is 15, so the possible lengths for + * any code are 1..15. + * + * - The fact that a length of zero is not permitted for a code has an + * interesting consequence. Normally if only one symbol is used for a given + * code, then in fact that code could be represented with zero bits. However + * in deflate, that code has to be at least one bit. So for example, if + * only a single distance base symbol appears in a block, then it will be + * represented by a single code of length one, in particular one 0 bit. This + * is an incomplete code, since if a 1 bit is received, it has no meaning, + * and should result in an error. So incomplete distance codes of one symbol + * should be permitted, and the receipt of invalid codes should be handled. + * + * - It is also possible to have a single literal/length code, but that code + * must be the end-of-block code, since every dynamic block has one. This + * is not the most efficient way to create an empty block (an empty fixed + * block is fewer bits), but it is allowed by the format. So incomplete + * literal/length codes of one symbol should also be permitted. + * + * - If there are only literal codes and no lengths, then there are no distance + * codes. This is represented by one distance code with zero bits. + * + * - The list of up to 286 length/literal lengths and up to 30 distance lengths + * are themselves compressed using Huffman codes and run-length encoding. In + * the list of code lengths, a 0 symbol means no code, a 1..15 symbol means + * that length, and the symbols 16, 17, and 18 are run-length instructions. + * Each of 16, 17, and 18 are follwed by extra bits to define the length of + * the run. 16 copies the last length 3 to 6 times. 17 represents 3 to 10 + * zero lengths, and 18 represents 11 to 138 zero lengths. Unused symbols + * are common, hence the special coding for zero lengths. + * + * - The symbols for 0..18 are Huffman coded, and so that code must be + * described first. This is simply a sequence of up to 19 three-bit values + * representing no code (0) or the code length for that symbol (1..7). + * + * - A dynamic block starts with three fixed-size counts from which is computed + * the number of literal/length code lengths, the number of distance code + * lengths, and the number of code length code lengths (ok, you come up with + * a better name!) in the code descriptions. For the literal/length and + * distance codes, lengths after those provided are considered zero, i.e. no + * code. The code length code lengths are received in a permuted order (see + * the order[] array below) to make a short code length code length list more + * likely. As it turns out, very short and very long codes are less likely + * to be seen in a dynamic code description, hence what may appear initially + * to be a peculiar ordering. + * + * - Given the number of literal/length code lengths (nlen) and distance code + * lengths (ndist), then they are treated as one long list of nlen + ndist + * code lengths. Therefore run-length coding can and often does cross the + * boundary between the two sets of lengths. + * + * - So to summarize, the code description at the start of a dynamic block is + * three counts for the number of code lengths for the literal/length codes, + * the distance codes, and the code length codes. This is followed by the + * code length code lengths, three bits each. This is used to construct the + * code length code which is used to read the remainder of the lengths. Then + * the literal/length code lengths and distance lengths are read as a single + * set of lengths using the code length codes. Codes are constructed from + * the resulting two sets of lengths, and then finally you can start + * decoding actual compressed data in the block. + * + * - For reference, a "typical" size for the code description in a dynamic + * block is around 80 bytes. + */ +local int dynamic(struct state *s) +{ + int nlen, ndist, ncode; /* number of lengths in descriptor */ + int index; /* index of lengths[] */ + int err; /* construct() return value */ + short lengths[MAXCODES]; /* descriptor code lengths */ + short lencnt[MAXBITS+1], lensym[MAXLCODES]; /* lencode memory */ + short distcnt[MAXBITS+1], distsym[MAXDCODES]; /* distcode memory */ + struct huffman lencode, distcode; /* length and distance codes */ + static const short order[19] = /* permutation of code length codes */ + {16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15}; + + /* construct lencode and distcode */ + lencode.count = lencnt; + lencode.symbol = lensym; + distcode.count = distcnt; + distcode.symbol = distsym; + + /* get number of lengths in each table, check lengths */ + nlen = bits(s, 5) + 257; + ndist = bits(s, 5) + 1; + ncode = bits(s, 4) + 4; + if (nlen > MAXLCODES || ndist > MAXDCODES) + return -3; /* bad counts */ + + /* read code length code lengths (really), missing lengths are zero */ + for (index = 0; index < ncode; index++) + lengths[order[index]] = bits(s, 3); + for (; index < 19; index++) + lengths[order[index]] = 0; + + /* build huffman table for code lengths codes (use lencode temporarily) */ + err = construct(&lencode, lengths, 19); + if (err != 0) /* require complete code set here */ + return -4; + + /* read length/literal and distance code length tables */ + index = 0; + while (index < nlen + ndist) { + int symbol; /* decoded value */ + int len; /* last length to repeat */ + + symbol = decode(s, &lencode); + if (symbol < 0) + return symbol; /* invalid symbol */ + if (symbol < 16) /* length in 0..15 */ + lengths[index++] = symbol; + else { /* repeat instruction */ + len = 0; /* assume repeating zeros */ + if (symbol == 16) { /* repeat last length 3..6 times */ + if (index == 0) + return -5; /* no last length! */ + len = lengths[index - 1]; /* last length */ + symbol = 3 + bits(s, 2); + } + else if (symbol == 17) /* repeat zero 3..10 times */ + symbol = 3 + bits(s, 3); + else /* == 18, repeat zero 11..138 times */ + symbol = 11 + bits(s, 7); + if (index + symbol > nlen + ndist) + return -6; /* too many lengths! */ + while (symbol--) /* repeat last or zero symbol times */ + lengths[index++] = len; + } + } + + /* check for end-of-block code -- there better be one! */ + if (lengths[256] == 0) + return -9; + + /* build huffman table for literal/length codes */ + err = construct(&lencode, lengths, nlen); + if (err && (err < 0 || nlen != lencode.count[0] + lencode.count[1])) + return -7; /* incomplete code ok only for single length 1 code */ + + /* build huffman table for distance codes */ + err = construct(&distcode, lengths + nlen, ndist); + if (err && (err < 0 || ndist != distcode.count[0] + distcode.count[1])) + return -8; /* incomplete code ok only for single length 1 code */ + + /* decode data until end-of-block code */ + return codes(s, &lencode, &distcode); +} + +/* + * Inflate source to dest. On return, destlen and sourcelen are updated to the + * size of the uncompressed data and the size of the deflate data respectively. + * On success, the return value of puff() is zero. If there is an error in the + * source data, i.e. it is not in the deflate format, then a negative value is + * returned. If there is not enough input available or there is not enough + * output space, then a positive error is returned. In that case, destlen and + * sourcelen are not updated to facilitate retrying from the beginning with the + * provision of more input data or more output space. In the case of invalid + * inflate data (a negative error), the dest and source pointers are updated to + * facilitate the debugging of deflators. + * + * puff() also has a mode to determine the size of the uncompressed output with + * no output written. For this dest must be (unsigned char *)0. In this case, + * the input value of *destlen is ignored, and on return *destlen is set to the + * size of the uncompressed output. + * + * The return codes are: + * + * 2: available inflate data did not terminate + * 1: output space exhausted before completing inflate + * 0: successful inflate + * -1: invalid block type (type == 3) + * -2: stored block length did not match one's complement + * -3: dynamic block code description: too many length or distance codes + * -4: dynamic block code description: code lengths codes incomplete + * -5: dynamic block code description: repeat lengths with no first length + * -6: dynamic block code description: repeat more than specified lengths + * -7: dynamic block code description: invalid literal/length code lengths + * -8: dynamic block code description: invalid distance code lengths + * -9: dynamic block code description: missing end-of-block code + * -10: invalid literal/length or distance code in fixed or dynamic block + * -11: distance is too far back in fixed or dynamic block + * + * Format notes: + * + * - Three bits are read for each block to determine the kind of block and + * whether or not it is the last block. Then the block is decoded and the + * process repeated if it was not the last block. + * + * - The leftover bits in the last byte of the deflate data after the last + * block (if it was a fixed or dynamic block) are undefined and have no + * expected values to check. + */ +int puff(unsigned char *dest, /* pointer to destination pointer */ + unsigned long *destlen, /* amount of output space */ + const unsigned char *source, /* pointer to source data pointer */ + unsigned long *sourcelen) /* amount of input available */ +{ + struct state s; /* input/output state */ + int last, type; /* block information */ + int err; /* return value */ + + /* initialize output state */ + s.out = dest; + s.outlen = *destlen; /* ignored if dest is NIL */ + s.outcnt = 0; + + /* initialize input state */ + s.in = source; + s.inlen = *sourcelen; + s.incnt = 0; + s.bitbuf = 0; + s.bitcnt = 0; + + /* return if bits() or decode() tries to read past available input */ + if (setjmp(s.env) != 0) /* if came back here via longjmp() */ + err = 2; /* then skip do-loop, return error */ + else { + /* process blocks until last block or error */ + do { + last = bits(&s, 1); /* one if last block */ + type = bits(&s, 2); /* block type 0..3 */ + err = type == 0 ? + stored(&s) : + (type == 1 ? + fixed(&s) : + (type == 2 ? + dynamic(&s) : + -1)); /* type == 3, invalid */ + if (err != 0) + break; /* return with error */ + } while (!last); + } + + /* update the lengths and return */ + if (err <= 0) { + *destlen = s.outcnt; + *sourcelen = s.incnt; + } + return err; +} diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/puff/puff.h b/software/scsi2sd-util/zlib-1.2.8/contrib/puff/puff.h new file mode 100644 index 0000000..e23a245 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/puff/puff.h @@ -0,0 +1,35 @@ +/* puff.h + Copyright (C) 2002-2013 Mark Adler, all rights reserved + version 2.3, 21 Jan 2013 + + This software is provided 'as-is', without any express or implied + warranty. In no event will the author be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. + + Mark Adler madler@alumni.caltech.edu + */ + + +/* + * See puff.c for purpose and usage. + */ +#ifndef NIL +# define NIL ((unsigned char *)0) /* for no output option */ +#endif + +int puff(unsigned char *dest, /* pointer to destination pointer */ + unsigned long *destlen, /* amount of output space */ + const unsigned char *source, /* pointer to source data pointer */ + unsigned long *sourcelen); /* amount of input available */ diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/puff/pufftest.c b/software/scsi2sd-util/zlib-1.2.8/contrib/puff/pufftest.c new file mode 100644 index 0000000..7764814 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/puff/pufftest.c @@ -0,0 +1,165 @@ +/* + * pufftest.c + * Copyright (C) 2002-2013 Mark Adler + * For conditions of distribution and use, see copyright notice in puff.h + * version 2.3, 21 Jan 2013 + */ + +/* Example of how to use puff(). + + Usage: puff [-w] [-f] [-nnn] file + ... | puff [-w] [-f] [-nnn] + + where file is the input file with deflate data, nnn is the number of bytes + of input to skip before inflating (e.g. to skip a zlib or gzip header), and + -w is used to write the decompressed data to stdout. -f is for coverage + testing, and causes pufftest to fail with not enough output space (-f does + a write like -w, so -w is not required). */ + +#include +#include +#include "puff.h" + +#if defined(MSDOS) || defined(OS2) || defined(WIN32) || defined(__CYGWIN__) +# include +# include +# define SET_BINARY_MODE(file) setmode(fileno(file), O_BINARY) +#else +# define SET_BINARY_MODE(file) +#endif + +#define local static + +/* Return size times approximately the cube root of 2, keeping the result as 1, + 3, or 5 times a power of 2 -- the result is always > size, until the result + is the maximum value of an unsigned long, where it remains. This is useful + to keep reallocations less than ~33% over the actual data. */ +local size_t bythirds(size_t size) +{ + int n; + size_t m; + + m = size; + for (n = 0; m; n++) + m >>= 1; + if (n < 3) + return size + 1; + n -= 3; + m = size >> n; + m += m == 6 ? 2 : 1; + m <<= n; + return m > size ? m : (size_t)(-1); +} + +/* Read the input file *name, or stdin if name is NULL, into allocated memory. + Reallocate to larger buffers until the entire file is read in. Return a + pointer to the allocated data, or NULL if there was a memory allocation + failure. *len is the number of bytes of data read from the input file (even + if load() returns NULL). If the input file was empty or could not be opened + or read, *len is zero. */ +local void *load(const char *name, size_t *len) +{ + size_t size; + void *buf, *swap; + FILE *in; + + *len = 0; + buf = malloc(size = 4096); + if (buf == NULL) + return NULL; + in = name == NULL ? stdin : fopen(name, "rb"); + if (in != NULL) { + for (;;) { + *len += fread((char *)buf + *len, 1, size - *len, in); + if (*len < size) break; + size = bythirds(size); + if (size == *len || (swap = realloc(buf, size)) == NULL) { + free(buf); + buf = NULL; + break; + } + buf = swap; + } + fclose(in); + } + return buf; +} + +int main(int argc, char **argv) +{ + int ret, put = 0, fail = 0; + unsigned skip = 0; + char *arg, *name = NULL; + unsigned char *source = NULL, *dest; + size_t len = 0; + unsigned long sourcelen, destlen; + + /* process arguments */ + while (arg = *++argv, --argc) + if (arg[0] == '-') { + if (arg[1] == 'w' && arg[2] == 0) + put = 1; + else if (arg[1] == 'f' && arg[2] == 0) + fail = 1, put = 1; + else if (arg[1] >= '0' && arg[1] <= '9') + skip = (unsigned)atoi(arg + 1); + else { + fprintf(stderr, "invalid option %s\n", arg); + return 3; + } + } + else if (name != NULL) { + fprintf(stderr, "only one file name allowed\n"); + return 3; + } + else + name = arg; + source = load(name, &len); + if (source == NULL) { + fprintf(stderr, "memory allocation failure\n"); + return 4; + } + if (len == 0) { + fprintf(stderr, "could not read %s, or it was empty\n", + name == NULL ? "" : name); + free(source); + return 3; + } + if (skip >= len) { + fprintf(stderr, "skip request of %d leaves no input\n", skip); + free(source); + return 3; + } + + /* test inflate data with offset skip */ + len -= skip; + sourcelen = (unsigned long)len; + ret = puff(NIL, &destlen, source + skip, &sourcelen); + if (ret) + fprintf(stderr, "puff() failed with return code %d\n", ret); + else { + fprintf(stderr, "puff() succeeded uncompressing %lu bytes\n", destlen); + if (sourcelen < len) fprintf(stderr, "%lu compressed bytes unused\n", + len - sourcelen); + } + + /* if requested, inflate again and write decompressd data to stdout */ + if (put && ret == 0) { + if (fail) + destlen >>= 1; + dest = malloc(destlen); + if (dest == NULL) { + fprintf(stderr, "memory allocation failure\n"); + free(source); + return 4; + } + puff(dest, &destlen, source + skip, &sourcelen); + SET_BINARY_MODE(stdout); + fwrite(dest, 1, destlen, stdout); + free(dest); + } + + /* clean up */ + free(source); + return ret; +} diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/puff/zeros.raw b/software/scsi2sd-util/zlib-1.2.8/contrib/puff/zeros.raw new file mode 100644 index 0000000..0a90e76 Binary files /dev/null and b/software/scsi2sd-util/zlib-1.2.8/contrib/puff/zeros.raw differ diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/testzlib/testzlib.c b/software/scsi2sd-util/zlib-1.2.8/contrib/testzlib/testzlib.c new file mode 100644 index 0000000..8626c92 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/testzlib/testzlib.c @@ -0,0 +1,275 @@ +#include +#include +#include + +#include "zlib.h" + + +void MyDoMinus64(LARGE_INTEGER *R,LARGE_INTEGER A,LARGE_INTEGER B) +{ + R->HighPart = A.HighPart - B.HighPart; + if (A.LowPart >= B.LowPart) + R->LowPart = A.LowPart - B.LowPart; + else + { + R->LowPart = A.LowPart - B.LowPart; + R->HighPart --; + } +} + +#ifdef _M_X64 +// see http://msdn2.microsoft.com/library/twchhe95(en-us,vs.80).aspx for __rdtsc +unsigned __int64 __rdtsc(void); +void BeginCountRdtsc(LARGE_INTEGER * pbeginTime64) +{ + // printf("rdtsc = %I64x\n",__rdtsc()); + pbeginTime64->QuadPart=__rdtsc(); +} + +LARGE_INTEGER GetResRdtsc(LARGE_INTEGER beginTime64,BOOL fComputeTimeQueryPerf) +{ + LARGE_INTEGER LIres; + unsigned _int64 res=__rdtsc()-((unsigned _int64)(beginTime64.QuadPart)); + LIres.QuadPart=res; + // printf("rdtsc = %I64x\n",__rdtsc()); + return LIres; +} +#else +#ifdef _M_IX86 +void myGetRDTSC32(LARGE_INTEGER * pbeginTime64) +{ + DWORD dwEdx,dwEax; + _asm + { + rdtsc + mov dwEax,eax + mov dwEdx,edx + } + pbeginTime64->LowPart=dwEax; + pbeginTime64->HighPart=dwEdx; +} + +void BeginCountRdtsc(LARGE_INTEGER * pbeginTime64) +{ + myGetRDTSC32(pbeginTime64); +} + +LARGE_INTEGER GetResRdtsc(LARGE_INTEGER beginTime64,BOOL fComputeTimeQueryPerf) +{ + LARGE_INTEGER LIres,endTime64; + myGetRDTSC32(&endTime64); + + LIres.LowPart=LIres.HighPart=0; + MyDoMinus64(&LIres,endTime64,beginTime64); + return LIres; +} +#else +void myGetRDTSC32(LARGE_INTEGER * pbeginTime64) +{ +} + +void BeginCountRdtsc(LARGE_INTEGER * pbeginTime64) +{ +} + +LARGE_INTEGER GetResRdtsc(LARGE_INTEGER beginTime64,BOOL fComputeTimeQueryPerf) +{ + LARGE_INTEGER lr; + lr.QuadPart=0; + return lr; +} +#endif +#endif + +void BeginCountPerfCounter(LARGE_INTEGER * pbeginTime64,BOOL fComputeTimeQueryPerf) +{ + if ((!fComputeTimeQueryPerf) || (!QueryPerformanceCounter(pbeginTime64))) + { + pbeginTime64->LowPart = GetTickCount(); + pbeginTime64->HighPart = 0; + } +} + +DWORD GetMsecSincePerfCounter(LARGE_INTEGER beginTime64,BOOL fComputeTimeQueryPerf) +{ + LARGE_INTEGER endTime64,ticksPerSecond,ticks; + DWORDLONG ticksShifted,tickSecShifted; + DWORD dwLog=16+0; + DWORD dwRet; + if ((!fComputeTimeQueryPerf) || (!QueryPerformanceCounter(&endTime64))) + dwRet = (GetTickCount() - beginTime64.LowPart)*1; + else + { + MyDoMinus64(&ticks,endTime64,beginTime64); + QueryPerformanceFrequency(&ticksPerSecond); + + + { + ticksShifted = Int64ShrlMod32(*(DWORDLONG*)&ticks,dwLog); + tickSecShifted = Int64ShrlMod32(*(DWORDLONG*)&ticksPerSecond,dwLog); + + } + + dwRet = (DWORD)((((DWORD)ticksShifted)*1000)/(DWORD)(tickSecShifted)); + dwRet *=1; + } + return dwRet; +} + +int ReadFileMemory(const char* filename,long* plFileSize,unsigned char** pFilePtr) +{ + FILE* stream; + unsigned char* ptr; + int retVal=1; + stream=fopen(filename, "rb"); + if (stream==NULL) + return 0; + + fseek(stream,0,SEEK_END); + + *plFileSize=ftell(stream); + fseek(stream,0,SEEK_SET); + ptr=malloc((*plFileSize)+1); + if (ptr==NULL) + retVal=0; + else + { + if (fread(ptr, 1, *plFileSize,stream) != (*plFileSize)) + retVal=0; + } + fclose(stream); + *pFilePtr=ptr; + return retVal; +} + +int main(int argc, char *argv[]) +{ + int BlockSizeCompress=0x8000; + int BlockSizeUncompress=0x8000; + int cprLevel=Z_DEFAULT_COMPRESSION ; + long lFileSize; + unsigned char* FilePtr; + long lBufferSizeCpr; + long lBufferSizeUncpr; + long lCompressedSize=0; + unsigned char* CprPtr; + unsigned char* UncprPtr; + long lSizeCpr,lSizeUncpr; + DWORD dwGetTick,dwMsecQP; + LARGE_INTEGER li_qp,li_rdtsc,dwResRdtsc; + + if (argc<=1) + { + printf("run TestZlib [BlockSizeCompress] [BlockSizeUncompress] [compres. level]\n"); + return 0; + } + + if (ReadFileMemory(argv[1],&lFileSize,&FilePtr)==0) + { + printf("error reading %s\n",argv[1]); + return 1; + } + else printf("file %s read, %u bytes\n",argv[1],lFileSize); + + if (argc>=3) + BlockSizeCompress=atol(argv[2]); + + if (argc>=4) + BlockSizeUncompress=atol(argv[3]); + + if (argc>=5) + cprLevel=(int)atol(argv[4]); + + lBufferSizeCpr = lFileSize + (lFileSize/0x10) + 0x200; + lBufferSizeUncpr = lBufferSizeCpr; + + CprPtr=(unsigned char*)malloc(lBufferSizeCpr + BlockSizeCompress); + + BeginCountPerfCounter(&li_qp,TRUE); + dwGetTick=GetTickCount(); + BeginCountRdtsc(&li_rdtsc); + { + z_stream zcpr; + int ret=Z_OK; + long lOrigToDo = lFileSize; + long lOrigDone = 0; + int step=0; + memset(&zcpr,0,sizeof(z_stream)); + deflateInit(&zcpr,cprLevel); + + zcpr.next_in = FilePtr; + zcpr.next_out = CprPtr; + + + do + { + long all_read_before = zcpr.total_in; + zcpr.avail_in = min(lOrigToDo,BlockSizeCompress); + zcpr.avail_out = BlockSizeCompress; + ret=deflate(&zcpr,(zcpr.avail_in==lOrigToDo) ? Z_FINISH : Z_SYNC_FLUSH); + lOrigDone += (zcpr.total_in-all_read_before); + lOrigToDo -= (zcpr.total_in-all_read_before); + step++; + } while (ret==Z_OK); + + lSizeCpr=zcpr.total_out; + deflateEnd(&zcpr); + dwGetTick=GetTickCount()-dwGetTick; + dwMsecQP=GetMsecSincePerfCounter(li_qp,TRUE); + dwResRdtsc=GetResRdtsc(li_rdtsc,TRUE); + printf("total compress size = %u, in %u step\n",lSizeCpr,step); + printf("time = %u msec = %f sec\n",dwGetTick,dwGetTick/(double)1000.); + printf("defcpr time QP = %u msec = %f sec\n",dwMsecQP,dwMsecQP/(double)1000.); + printf("defcpr result rdtsc = %I64x\n\n",dwResRdtsc.QuadPart); + } + + CprPtr=(unsigned char*)realloc(CprPtr,lSizeCpr); + UncprPtr=(unsigned char*)malloc(lBufferSizeUncpr + BlockSizeUncompress); + + BeginCountPerfCounter(&li_qp,TRUE); + dwGetTick=GetTickCount(); + BeginCountRdtsc(&li_rdtsc); + { + z_stream zcpr; + int ret=Z_OK; + long lOrigToDo = lSizeCpr; + long lOrigDone = 0; + int step=0; + memset(&zcpr,0,sizeof(z_stream)); + inflateInit(&zcpr); + + zcpr.next_in = CprPtr; + zcpr.next_out = UncprPtr; + + + do + { + long all_read_before = zcpr.total_in; + zcpr.avail_in = min(lOrigToDo,BlockSizeUncompress); + zcpr.avail_out = BlockSizeUncompress; + ret=inflate(&zcpr,Z_SYNC_FLUSH); + lOrigDone += (zcpr.total_in-all_read_before); + lOrigToDo -= (zcpr.total_in-all_read_before); + step++; + } while (ret==Z_OK); + + lSizeUncpr=zcpr.total_out; + inflateEnd(&zcpr); + dwGetTick=GetTickCount()-dwGetTick; + dwMsecQP=GetMsecSincePerfCounter(li_qp,TRUE); + dwResRdtsc=GetResRdtsc(li_rdtsc,TRUE); + printf("total uncompress size = %u, in %u step\n",lSizeUncpr,step); + printf("time = %u msec = %f sec\n",dwGetTick,dwGetTick/(double)1000.); + printf("uncpr time QP = %u msec = %f sec\n",dwMsecQP,dwMsecQP/(double)1000.); + printf("uncpr result rdtsc = %I64x\n\n",dwResRdtsc.QuadPart); + } + + if (lSizeUncpr==lFileSize) + { + if (memcmp(FilePtr,UncprPtr,lFileSize)==0) + printf("compare ok\n"); + + } + + return 0; +} diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/testzlib/testzlib.txt b/software/scsi2sd-util/zlib-1.2.8/contrib/testzlib/testzlib.txt new file mode 100644 index 0000000..e508bb2 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/testzlib/testzlib.txt @@ -0,0 +1,10 @@ +To build testzLib with Visual Studio 2005: + +copy to a directory file from : +- root of zLib tree +- contrib/testzlib +- contrib/masmx86 +- contrib/masmx64 +- contrib/vstudio/vc7 + +and open testzlib8.sln \ No newline at end of file diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/untgz/Makefile b/software/scsi2sd-util/zlib-1.2.8/contrib/untgz/Makefile new file mode 100644 index 0000000..b54266f --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/untgz/Makefile @@ -0,0 +1,14 @@ +CC=cc +CFLAGS=-g + +untgz: untgz.o ../../libz.a + $(CC) $(CFLAGS) -o untgz untgz.o -L../.. -lz + +untgz.o: untgz.c ../../zlib.h + $(CC) $(CFLAGS) -c -I../.. untgz.c + +../../libz.a: + cd ../..; ./configure; make + +clean: + rm -f untgz untgz.o *~ diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/untgz/Makefile.msc b/software/scsi2sd-util/zlib-1.2.8/contrib/untgz/Makefile.msc new file mode 100644 index 0000000..77b8602 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/untgz/Makefile.msc @@ -0,0 +1,17 @@ +CC=cl +CFLAGS=-MD + +untgz.exe: untgz.obj ..\..\zlib.lib + $(CC) $(CFLAGS) untgz.obj ..\..\zlib.lib + +untgz.obj: untgz.c ..\..\zlib.h + $(CC) $(CFLAGS) -c -I..\.. untgz.c + +..\..\zlib.lib: + cd ..\.. + $(MAKE) -f win32\makefile.msc + cd contrib\untgz + +clean: + -del untgz.obj + -del untgz.exe diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/untgz/untgz.c b/software/scsi2sd-util/zlib-1.2.8/contrib/untgz/untgz.c new file mode 100644 index 0000000..2c391e5 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/untgz/untgz.c @@ -0,0 +1,674 @@ +/* + * untgz.c -- Display contents and extract files from a gzip'd TAR file + * + * written by Pedro A. Aranda Gutierrez + * adaptation to Unix by Jean-loup Gailly + * various fixes by Cosmin Truta + */ + +#include +#include +#include +#include +#include + +#include "zlib.h" + +#ifdef unix +# include +#else +# include +# include +#endif + +#ifdef WIN32 +#include +# ifndef F_OK +# define F_OK 0 +# endif +# define mkdir(dirname,mode) _mkdir(dirname) +# ifdef _MSC_VER +# define access(path,mode) _access(path,mode) +# define chmod(path,mode) _chmod(path,mode) +# define strdup(str) _strdup(str) +# endif +#else +# include +#endif + + +/* values used in typeflag field */ + +#define REGTYPE '0' /* regular file */ +#define AREGTYPE '\0' /* regular file */ +#define LNKTYPE '1' /* link */ +#define SYMTYPE '2' /* reserved */ +#define CHRTYPE '3' /* character special */ +#define BLKTYPE '4' /* block special */ +#define DIRTYPE '5' /* directory */ +#define FIFOTYPE '6' /* FIFO special */ +#define CONTTYPE '7' /* reserved */ + +/* GNU tar extensions */ + +#define GNUTYPE_DUMPDIR 'D' /* file names from dumped directory */ +#define GNUTYPE_LONGLINK 'K' /* long link name */ +#define GNUTYPE_LONGNAME 'L' /* long file name */ +#define GNUTYPE_MULTIVOL 'M' /* continuation of file from another volume */ +#define GNUTYPE_NAMES 'N' /* file name that does not fit into main hdr */ +#define GNUTYPE_SPARSE 'S' /* sparse file */ +#define GNUTYPE_VOLHDR 'V' /* tape/volume header */ + + +/* tar header */ + +#define BLOCKSIZE 512 +#define SHORTNAMESIZE 100 + +struct tar_header +{ /* byte offset */ + char name[100]; /* 0 */ + char mode[8]; /* 100 */ + char uid[8]; /* 108 */ + char gid[8]; /* 116 */ + char size[12]; /* 124 */ + char mtime[12]; /* 136 */ + char chksum[8]; /* 148 */ + char typeflag; /* 156 */ + char linkname[100]; /* 157 */ + char magic[6]; /* 257 */ + char version[2]; /* 263 */ + char uname[32]; /* 265 */ + char gname[32]; /* 297 */ + char devmajor[8]; /* 329 */ + char devminor[8]; /* 337 */ + char prefix[155]; /* 345 */ + /* 500 */ +}; + +union tar_buffer +{ + char buffer[BLOCKSIZE]; + struct tar_header header; +}; + +struct attr_item +{ + struct attr_item *next; + char *fname; + int mode; + time_t time; +}; + +enum { TGZ_EXTRACT, TGZ_LIST, TGZ_INVALID }; + +char *TGZfname OF((const char *)); +void TGZnotfound OF((const char *)); + +int getoct OF((char *, int)); +char *strtime OF((time_t *)); +int setfiletime OF((char *, time_t)); +void push_attr OF((struct attr_item **, char *, int, time_t)); +void restore_attr OF((struct attr_item **)); + +int ExprMatch OF((char *, char *)); + +int makedir OF((char *)); +int matchname OF((int, int, char **, char *)); + +void error OF((const char *)); +int tar OF((gzFile, int, int, int, char **)); + +void help OF((int)); +int main OF((int, char **)); + +char *prog; + +const char *TGZsuffix[] = { "\0", ".tar", ".tar.gz", ".taz", ".tgz", NULL }; + +/* return the file name of the TGZ archive */ +/* or NULL if it does not exist */ + +char *TGZfname (const char *arcname) +{ + static char buffer[1024]; + int origlen,i; + + strcpy(buffer,arcname); + origlen = strlen(buffer); + + for (i=0; TGZsuffix[i]; i++) + { + strcpy(buffer+origlen,TGZsuffix[i]); + if (access(buffer,F_OK) == 0) + return buffer; + } + return NULL; +} + + +/* error message for the filename */ + +void TGZnotfound (const char *arcname) +{ + int i; + + fprintf(stderr,"%s: Couldn't find ",prog); + for (i=0;TGZsuffix[i];i++) + fprintf(stderr,(TGZsuffix[i+1]) ? "%s%s, " : "or %s%s\n", + arcname, + TGZsuffix[i]); + exit(1); +} + + +/* convert octal digits to int */ +/* on error return -1 */ + +int getoct (char *p,int width) +{ + int result = 0; + char c; + + while (width--) + { + c = *p++; + if (c == 0) + break; + if (c == ' ') + continue; + if (c < '0' || c > '7') + return -1; + result = result * 8 + (c - '0'); + } + return result; +} + + +/* convert time_t to string */ +/* use the "YYYY/MM/DD hh:mm:ss" format */ + +char *strtime (time_t *t) +{ + struct tm *local; + static char result[32]; + + local = localtime(t); + sprintf(result,"%4d/%02d/%02d %02d:%02d:%02d", + local->tm_year+1900, local->tm_mon+1, local->tm_mday, + local->tm_hour, local->tm_min, local->tm_sec); + return result; +} + + +/* set file time */ + +int setfiletime (char *fname,time_t ftime) +{ +#ifdef WIN32 + static int isWinNT = -1; + SYSTEMTIME st; + FILETIME locft, modft; + struct tm *loctm; + HANDLE hFile; + int result; + + loctm = localtime(&ftime); + if (loctm == NULL) + return -1; + + st.wYear = (WORD)loctm->tm_year + 1900; + st.wMonth = (WORD)loctm->tm_mon + 1; + st.wDayOfWeek = (WORD)loctm->tm_wday; + st.wDay = (WORD)loctm->tm_mday; + st.wHour = (WORD)loctm->tm_hour; + st.wMinute = (WORD)loctm->tm_min; + st.wSecond = (WORD)loctm->tm_sec; + st.wMilliseconds = 0; + if (!SystemTimeToFileTime(&st, &locft) || + !LocalFileTimeToFileTime(&locft, &modft)) + return -1; + + if (isWinNT < 0) + isWinNT = (GetVersion() < 0x80000000) ? 1 : 0; + hFile = CreateFile(fname, GENERIC_WRITE, 0, NULL, OPEN_EXISTING, + (isWinNT ? FILE_FLAG_BACKUP_SEMANTICS : 0), + NULL); + if (hFile == INVALID_HANDLE_VALUE) + return -1; + result = SetFileTime(hFile, NULL, NULL, &modft) ? 0 : -1; + CloseHandle(hFile); + return result; +#else + struct utimbuf settime; + + settime.actime = settime.modtime = ftime; + return utime(fname,&settime); +#endif +} + + +/* push file attributes */ + +void push_attr(struct attr_item **list,char *fname,int mode,time_t time) +{ + struct attr_item *item; + + item = (struct attr_item *)malloc(sizeof(struct attr_item)); + if (item == NULL) + error("Out of memory"); + item->fname = strdup(fname); + item->mode = mode; + item->time = time; + item->next = *list; + *list = item; +} + + +/* restore file attributes */ + +void restore_attr(struct attr_item **list) +{ + struct attr_item *item, *prev; + + for (item = *list; item != NULL; ) + { + setfiletime(item->fname,item->time); + chmod(item->fname,item->mode); + prev = item; + item = item->next; + free(prev); + } + *list = NULL; +} + + +/* match regular expression */ + +#define ISSPECIAL(c) (((c) == '*') || ((c) == '/')) + +int ExprMatch (char *string,char *expr) +{ + while (1) + { + if (ISSPECIAL(*expr)) + { + if (*expr == '/') + { + if (*string != '\\' && *string != '/') + return 0; + string ++; expr++; + } + else if (*expr == '*') + { + if (*expr ++ == 0) + return 1; + while (*++string != *expr) + if (*string == 0) + return 0; + } + } + else + { + if (*string != *expr) + return 0; + if (*expr++ == 0) + return 1; + string++; + } + } +} + + +/* recursive mkdir */ +/* abort on ENOENT; ignore other errors like "directory already exists" */ +/* return 1 if OK */ +/* 0 on error */ + +int makedir (char *newdir) +{ + char *buffer = strdup(newdir); + char *p; + int len = strlen(buffer); + + if (len <= 0) { + free(buffer); + return 0; + } + if (buffer[len-1] == '/') { + buffer[len-1] = '\0'; + } + if (mkdir(buffer, 0755) == 0) + { + free(buffer); + return 1; + } + + p = buffer+1; + while (1) + { + char hold; + + while(*p && *p != '\\' && *p != '/') + p++; + hold = *p; + *p = 0; + if ((mkdir(buffer, 0755) == -1) && (errno == ENOENT)) + { + fprintf(stderr,"%s: Couldn't create directory %s\n",prog,buffer); + free(buffer); + return 0; + } + if (hold == 0) + break; + *p++ = hold; + } + free(buffer); + return 1; +} + + +int matchname (int arg,int argc,char **argv,char *fname) +{ + if (arg == argc) /* no arguments given (untgz tgzarchive) */ + return 1; + + while (arg < argc) + if (ExprMatch(fname,argv[arg++])) + return 1; + + return 0; /* ignore this for the moment being */ +} + + +/* tar file list or extract */ + +int tar (gzFile in,int action,int arg,int argc,char **argv) +{ + union tar_buffer buffer; + int len; + int err; + int getheader = 1; + int remaining = 0; + FILE *outfile = NULL; + char fname[BLOCKSIZE]; + int tarmode; + time_t tartime; + struct attr_item *attributes = NULL; + + if (action == TGZ_LIST) + printf(" date time size file\n" + " ---------- -------- --------- -------------------------------------\n"); + while (1) + { + len = gzread(in, &buffer, BLOCKSIZE); + if (len < 0) + error(gzerror(in, &err)); + /* + * Always expect complete blocks to process + * the tar information. + */ + if (len != BLOCKSIZE) + { + action = TGZ_INVALID; /* force error exit */ + remaining = 0; /* force I/O cleanup */ + } + + /* + * If we have to get a tar header + */ + if (getheader >= 1) + { + /* + * if we met the end of the tar + * or the end-of-tar block, + * we are done + */ + if (len == 0 || buffer.header.name[0] == 0) + break; + + tarmode = getoct(buffer.header.mode,8); + tartime = (time_t)getoct(buffer.header.mtime,12); + if (tarmode == -1 || tartime == (time_t)-1) + { + buffer.header.name[0] = 0; + action = TGZ_INVALID; + } + + if (getheader == 1) + { + strncpy(fname,buffer.header.name,SHORTNAMESIZE); + if (fname[SHORTNAMESIZE-1] != 0) + fname[SHORTNAMESIZE] = 0; + } + else + { + /* + * The file name is longer than SHORTNAMESIZE + */ + if (strncmp(fname,buffer.header.name,SHORTNAMESIZE-1) != 0) + error("bad long name"); + getheader = 1; + } + + /* + * Act according to the type flag + */ + switch (buffer.header.typeflag) + { + case DIRTYPE: + if (action == TGZ_LIST) + printf(" %s %s\n",strtime(&tartime),fname); + if (action == TGZ_EXTRACT) + { + makedir(fname); + push_attr(&attributes,fname,tarmode,tartime); + } + break; + case REGTYPE: + case AREGTYPE: + remaining = getoct(buffer.header.size,12); + if (remaining == -1) + { + action = TGZ_INVALID; + break; + } + if (action == TGZ_LIST) + printf(" %s %9d %s\n",strtime(&tartime),remaining,fname); + else if (action == TGZ_EXTRACT) + { + if (matchname(arg,argc,argv,fname)) + { + outfile = fopen(fname,"wb"); + if (outfile == NULL) { + /* try creating directory */ + char *p = strrchr(fname, '/'); + if (p != NULL) { + *p = '\0'; + makedir(fname); + *p = '/'; + outfile = fopen(fname,"wb"); + } + } + if (outfile != NULL) + printf("Extracting %s\n",fname); + else + fprintf(stderr, "%s: Couldn't create %s",prog,fname); + } + else + outfile = NULL; + } + getheader = 0; + break; + case GNUTYPE_LONGLINK: + case GNUTYPE_LONGNAME: + remaining = getoct(buffer.header.size,12); + if (remaining < 0 || remaining >= BLOCKSIZE) + { + action = TGZ_INVALID; + break; + } + len = gzread(in, fname, BLOCKSIZE); + if (len < 0) + error(gzerror(in, &err)); + if (fname[BLOCKSIZE-1] != 0 || (int)strlen(fname) > remaining) + { + action = TGZ_INVALID; + break; + } + getheader = 2; + break; + default: + if (action == TGZ_LIST) + printf(" %s <---> %s\n",strtime(&tartime),fname); + break; + } + } + else + { + unsigned int bytes = (remaining > BLOCKSIZE) ? BLOCKSIZE : remaining; + + if (outfile != NULL) + { + if (fwrite(&buffer,sizeof(char),bytes,outfile) != bytes) + { + fprintf(stderr, + "%s: Error writing %s -- skipping\n",prog,fname); + fclose(outfile); + outfile = NULL; + remove(fname); + } + } + remaining -= bytes; + } + + if (remaining == 0) + { + getheader = 1; + if (outfile != NULL) + { + fclose(outfile); + outfile = NULL; + if (action != TGZ_INVALID) + push_attr(&attributes,fname,tarmode,tartime); + } + } + + /* + * Abandon if errors are found + */ + if (action == TGZ_INVALID) + { + error("broken archive"); + break; + } + } + + /* + * Restore file modes and time stamps + */ + restore_attr(&attributes); + + if (gzclose(in) != Z_OK) + error("failed gzclose"); + + return 0; +} + + +/* ============================================================ */ + +void help(int exitval) +{ + printf("untgz version 0.2.1\n" + " using zlib version %s\n\n", + zlibVersion()); + printf("Usage: untgz file.tgz extract all files\n" + " untgz file.tgz fname ... extract selected files\n" + " untgz -l file.tgz list archive contents\n" + " untgz -h display this help\n"); + exit(exitval); +} + +void error(const char *msg) +{ + fprintf(stderr, "%s: %s\n", prog, msg); + exit(1); +} + + +/* ============================================================ */ + +#if defined(WIN32) && defined(__GNUC__) +int _CRT_glob = 0; /* disable argument globbing in MinGW */ +#endif + +int main(int argc,char **argv) +{ + int action = TGZ_EXTRACT; + int arg = 1; + char *TGZfile; + gzFile *f; + + prog = strrchr(argv[0],'\\'); + if (prog == NULL) + { + prog = strrchr(argv[0],'/'); + if (prog == NULL) + { + prog = strrchr(argv[0],':'); + if (prog == NULL) + prog = argv[0]; + else + prog++; + } + else + prog++; + } + else + prog++; + + if (argc == 1) + help(0); + + if (strcmp(argv[arg],"-l") == 0) + { + action = TGZ_LIST; + if (argc == ++arg) + help(0); + } + else if (strcmp(argv[arg],"-h") == 0) + { + help(0); + } + + if ((TGZfile = TGZfname(argv[arg])) == NULL) + TGZnotfound(argv[arg]); + + ++arg; + if ((action == TGZ_LIST) && (arg != argc)) + help(1); + +/* + * Process the TGZ file + */ + switch(action) + { + case TGZ_LIST: + case TGZ_EXTRACT: + f = gzopen(TGZfile,"rb"); + if (f == NULL) + { + fprintf(stderr,"%s: Couldn't gzopen %s\n",prog,TGZfile); + return 1; + } + exit(tar(f, action, arg, argc, argv)); + break; + + default: + error("Unknown option"); + exit(1); + } + + return 0; +} diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/vstudio/readme.txt b/software/scsi2sd-util/zlib-1.2.8/contrib/vstudio/readme.txt new file mode 100644 index 0000000..04b8baa --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/vstudio/readme.txt @@ -0,0 +1,65 @@ +Building instructions for the DLL versions of Zlib 1.2.8 +======================================================== + +This directory contains projects that build zlib and minizip using +Microsoft Visual C++ 9.0/10.0. + +You don't need to build these projects yourself. You can download the +binaries from: + http://www.winimage.com/zLibDll + +More information can be found at this site. + + + + + +Build instructions for Visual Studio 2008 (32 bits or 64 bits) +-------------------------------------------------------------- +- Uncompress current zlib, including all contrib/* files +- Compile assembly code (with Visual Studio Command Prompt) by running: + bld_ml64.bat (in contrib\masmx64) + bld_ml32.bat (in contrib\masmx86) +- Open contrib\vstudio\vc9\zlibvc.sln with Microsoft Visual C++ 2008 +- Or run: vcbuild /rebuild contrib\vstudio\vc9\zlibvc.sln "Release|Win32" + +Build instructions for Visual Studio 2010 (32 bits or 64 bits) +-------------------------------------------------------------- +- Uncompress current zlib, including all contrib/* files +- Open contrib\vstudio\vc10\zlibvc.sln with Microsoft Visual C++ 2010 + +Build instructions for Visual Studio 2012 (32 bits or 64 bits) +-------------------------------------------------------------- +- Uncompress current zlib, including all contrib/* files +- Open contrib\vstudio\vc11\zlibvc.sln with Microsoft Visual C++ 2012 + + +Important +--------- +- To use zlibwapi.dll in your application, you must define the + macro ZLIB_WINAPI when compiling your application's source files. + + +Additional notes +---------------- +- This DLL, named zlibwapi.dll, is compatible to the old zlib.dll built + by Gilles Vollant from the zlib 1.1.x sources, and distributed at + http://www.winimage.com/zLibDll + It uses the WINAPI calling convention for the exported functions, and + includes the minizip functionality. If your application needs that + particular build of zlib.dll, you can rename zlibwapi.dll to zlib.dll. + +- The new DLL was renamed because there exist several incompatible + versions of zlib.dll on the Internet. + +- There is also an official DLL build of zlib, named zlib1.dll. This one + is exporting the functions using the CDECL convention. See the file + win32\DLL_FAQ.txt found in this zlib distribution. + +- There used to be a ZLIB_DLL macro in zlib 1.1.x, but now this symbol + has a slightly different effect. To avoid compatibility problems, do + not define it here. + + +Gilles Vollant +info@winimage.com diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/vstudio/vc10/miniunz.vcxproj b/software/scsi2sd-util/zlib-1.2.8/contrib/vstudio/vc10/miniunz.vcxproj new file mode 100644 index 0000000..1b36242 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/vstudio/vc10/miniunz.vcxproj @@ -0,0 +1,310 @@ + + + + + Debug + Itanium + + + Debug + Win32 + + + Debug + x64 + + + Release + Itanium + + + Release + Win32 + + + Release + x64 + + + + {C52F9E7B-498A-42BE-8DB4-85A15694382A} + Win32Proj + + + + Application + MultiByte + + + Application + MultiByte + + + Application + MultiByte + + + Application + MultiByte + + + Application + MultiByte + + + Application + MultiByte + + + + + + + + + + + + + + + + + + + + + + + + + <_ProjectFileVersion>10.0.30128.1 + x86\MiniUnzip$(Configuration)\ + x86\MiniUnzip$(Configuration)\Tmp\ + true + false + x86\MiniUnzip$(Configuration)\ + x86\MiniUnzip$(Configuration)\Tmp\ + false + false + x64\MiniUnzip$(Configuration)\ + x64\MiniUnzip$(Configuration)\Tmp\ + true + false + ia64\MiniUnzip$(Configuration)\ + ia64\MiniUnzip$(Configuration)\Tmp\ + true + false + x64\MiniUnzip$(Configuration)\ + x64\MiniUnzip$(Configuration)\Tmp\ + false + false + ia64\MiniUnzip$(Configuration)\ + ia64\MiniUnzip$(Configuration)\Tmp\ + false + false + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + + + + Disabled + ..\..\..;..\..\minizip;%(AdditionalIncludeDirectories) + WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;_DEBUG;_CONSOLE;%(PreprocessorDefinitions) + true + Default + MultiThreadedDebug + false + + + $(IntDir) + Level3 + EditAndContinue + + + x86\ZlibDllDebug\zlibwapi.lib;%(AdditionalDependencies) + $(OutDir)miniunz.exe + true + $(OutDir)miniunz.pdb + Console + false + + + MachineX86 + + + + + MaxSpeed + OnlyExplicitInline + true + ..\..\..;..\..\minizip;%(AdditionalIncludeDirectories) + WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;NDEBUG;_CONSOLE;%(PreprocessorDefinitions) + true + Default + MultiThreaded + false + true + + + $(IntDir) + Level3 + ProgramDatabase + + + x86\ZlibDllRelease\zlibwapi.lib;%(AdditionalDependencies) + $(OutDir)miniunz.exe + true + Console + true + true + false + + + MachineX86 + + + + + X64 + + + Disabled + ..\..\..;..\..\minizip;%(AdditionalIncludeDirectories) + _CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;_DEBUG;_CONSOLE;WIN64;%(PreprocessorDefinitions) + true + Default + MultiThreadedDebugDLL + false + + + $(IntDir) + Level3 + ProgramDatabase + + + x64\ZlibDllDebug\zlibwapi.lib;%(AdditionalDependencies) + $(OutDir)miniunz.exe + true + $(OutDir)miniunz.pdb + Console + MachineX64 + + + + + Itanium + + + Disabled + ..\..\..;..\..\minizip;%(AdditionalIncludeDirectories) + _CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;_DEBUG;_CONSOLE;WIN64;%(PreprocessorDefinitions) + true + Default + MultiThreadedDebugDLL + false + + + $(IntDir) + Level3 + ProgramDatabase + + + ia64\ZlibDllDebug\zlibwapi.lib;%(AdditionalDependencies) + $(OutDir)miniunz.exe + true + $(OutDir)miniunz.pdb + Console + MachineIA64 + + + + + X64 + + + MaxSpeed + OnlyExplicitInline + true + ..\..\..;..\..\minizip;%(AdditionalIncludeDirectories) + _CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;NDEBUG;_CONSOLE;WIN64;%(PreprocessorDefinitions) + true + Default + MultiThreadedDLL + false + true + + + $(IntDir) + Level3 + ProgramDatabase + + + x64\ZlibDllRelease\zlibwapi.lib;%(AdditionalDependencies) + $(OutDir)miniunz.exe + true + Console + true + true + MachineX64 + + + + + Itanium + + + MaxSpeed + OnlyExplicitInline + true + ..\..\..;..\..\minizip;%(AdditionalIncludeDirectories) + _CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;NDEBUG;_CONSOLE;WIN64;%(PreprocessorDefinitions) + true + Default + MultiThreadedDLL + false + true + + + $(IntDir) + Level3 + ProgramDatabase + + + ia64\ZlibDllRelease\zlibwapi.lib;%(AdditionalDependencies) + $(OutDir)miniunz.exe + true + Console + true + true + MachineIA64 + + + + + + + + {8fd826f8-3739-44e6-8cc8-997122e53b8d} + + + + + + \ No newline at end of file diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/vstudio/vc10/miniunz.vcxproj.filters b/software/scsi2sd-util/zlib-1.2.8/contrib/vstudio/vc10/miniunz.vcxproj.filters new file mode 100644 index 0000000..0bd1221 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/vstudio/vc10/miniunz.vcxproj.filters @@ -0,0 +1,22 @@ + + + + + {048af943-022b-4db6-beeb-a54c34774ee2} + cpp;c;cxx;def;odl;idl;hpj;bat;asm + + + {c1d600d2-888f-4aea-b73e-8b0dd9befa0c} + h;hpp;hxx;hm;inl;inc + + + {0844199a-966b-4f19-81db-1e0125e141b9} + rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe + + + + + Source Files + + + \ No newline at end of file diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/vstudio/vc10/minizip.vcxproj b/software/scsi2sd-util/zlib-1.2.8/contrib/vstudio/vc10/minizip.vcxproj new file mode 100644 index 0000000..ccd3651 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/vstudio/vc10/minizip.vcxproj @@ -0,0 +1,307 @@ + + + + + Debug + Itanium + + + Debug + Win32 + + + Debug + x64 + + + Release + Itanium + + + Release + Win32 + + + Release + x64 + + + + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B} + Win32Proj + + + + Application + MultiByte + + + Application + MultiByte + + + Application + MultiByte + + + Application + MultiByte + + + Application + MultiByte + + + Application + MultiByte + + + + + + + + + + + + + + + + + + + + + + + + + <_ProjectFileVersion>10.0.30128.1 + x86\MiniZip$(Configuration)\ + x86\MiniZip$(Configuration)\Tmp\ + true + false + x86\MiniZip$(Configuration)\ + x86\MiniZip$(Configuration)\Tmp\ + false + x64\$(Configuration)\ + x64\$(Configuration)\ + true + false + ia64\$(Configuration)\ + ia64\$(Configuration)\ + true + false + x64\$(Configuration)\ + x64\$(Configuration)\ + false + ia64\$(Configuration)\ + ia64\$(Configuration)\ + false + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + + + + Disabled + ..\..\..;..\..\minizip;%(AdditionalIncludeDirectories) + WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;_DEBUG;_CONSOLE;%(PreprocessorDefinitions) + true + Default + MultiThreadedDebug + false + + + $(IntDir) + Level3 + EditAndContinue + + + x86\ZlibDllDebug\zlibwapi.lib;%(AdditionalDependencies) + $(OutDir)minizip.exe + true + $(OutDir)minizip.pdb + Console + false + + + MachineX86 + + + + + MaxSpeed + OnlyExplicitInline + true + ..\..\..;..\..\minizip;%(AdditionalIncludeDirectories) + WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;NDEBUG;_CONSOLE;%(PreprocessorDefinitions) + true + Default + MultiThreaded + false + true + + + $(IntDir) + Level3 + ProgramDatabase + + + x86\ZlibDllRelease\zlibwapi.lib;%(AdditionalDependencies) + $(OutDir)minizip.exe + true + Console + true + true + false + + + MachineX86 + + + + + X64 + + + Disabled + ..\..\..;..\..\minizip;%(AdditionalIncludeDirectories) + _CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;_DEBUG;_CONSOLE;WIN64;%(PreprocessorDefinitions) + true + Default + MultiThreadedDebugDLL + false + + + $(IntDir) + Level3 + ProgramDatabase + + + x64\ZlibDllDebug\zlibwapi.lib;%(AdditionalDependencies) + $(OutDir)minizip.exe + true + $(OutDir)minizip.pdb + Console + MachineX64 + + + + + Itanium + + + Disabled + ..\..\..;..\..\minizip;%(AdditionalIncludeDirectories) + _CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;_DEBUG;_CONSOLE;WIN64;%(PreprocessorDefinitions) + true + Default + MultiThreadedDebugDLL + false + + + $(IntDir) + Level3 + ProgramDatabase + + + ia64\ZlibDllDebug\zlibwapi.lib;%(AdditionalDependencies) + $(OutDir)minizip.exe + true + $(OutDir)minizip.pdb + Console + MachineIA64 + + + + + X64 + + + MaxSpeed + OnlyExplicitInline + true + ..\..\..;..\..\minizip;%(AdditionalIncludeDirectories) + _CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;NDEBUG;_CONSOLE;WIN64;%(PreprocessorDefinitions) + true + Default + MultiThreadedDLL + false + true + + + $(IntDir) + Level3 + ProgramDatabase + + + x64\ZlibDllRelease\zlibwapi.lib;%(AdditionalDependencies) + $(OutDir)minizip.exe + true + Console + true + true + MachineX64 + + + + + Itanium + + + MaxSpeed + OnlyExplicitInline + true + ..\..\..;..\..\minizip;%(AdditionalIncludeDirectories) + _CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;NDEBUG;_CONSOLE;WIN64;%(PreprocessorDefinitions) + true + Default + MultiThreadedDLL + false + true + + + $(IntDir) + Level3 + ProgramDatabase + + + ia64\ZlibDllRelease\zlibwapi.lib;%(AdditionalDependencies) + $(OutDir)minizip.exe + true + Console + true + true + MachineIA64 + + + + + + + + {8fd826f8-3739-44e6-8cc8-997122e53b8d} + + + + + + \ No newline at end of file diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/vstudio/vc10/minizip.vcxproj.filters b/software/scsi2sd-util/zlib-1.2.8/contrib/vstudio/vc10/minizip.vcxproj.filters new file mode 100644 index 0000000..7076d76 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/vstudio/vc10/minizip.vcxproj.filters @@ -0,0 +1,22 @@ + + + + + {c0419b40-bf50-40da-b153-ff74215b79de} + cpp;c;cxx;def;odl;idl;hpj;bat;asm + + + {bb87b070-735b-478e-92ce-7383abb2f36c} + h;hpp;hxx;hm;inl;inc + + + {f46ab6a6-548f-43cb-ae96-681abb5bd5db} + rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe + + + + + Source Files + + + \ No newline at end of file diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/vstudio/vc10/testzlib.vcxproj b/software/scsi2sd-util/zlib-1.2.8/contrib/vstudio/vc10/testzlib.vcxproj new file mode 100644 index 0000000..476b8ea --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/vstudio/vc10/testzlib.vcxproj @@ -0,0 +1,420 @@ + + + + + Debug + Itanium + + + Debug + Win32 + + + Debug + x64 + + + ReleaseWithoutAsm + Itanium + + + ReleaseWithoutAsm + Win32 + + + ReleaseWithoutAsm + x64 + + + Release + Itanium + + + Release + Win32 + + + Release + x64 + + + + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B} + testzlib + Win32Proj + + + + Application + MultiByte + true + + + Application + MultiByte + true + + + Application + MultiByte + + + Application + MultiByte + true + + + Application + MultiByte + true + + + Application + MultiByte + + + Application + true + + + Application + true + + + Application + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + <_ProjectFileVersion>10.0.30128.1 + x86\TestZlib$(Configuration)\ + x86\TestZlib$(Configuration)\Tmp\ + true + false + x86\TestZlib$(Configuration)\ + x86\TestZlib$(Configuration)\Tmp\ + false + false + x86\TestZlib$(Configuration)\ + x86\TestZlib$(Configuration)\Tmp\ + false + false + x64\TestZlib$(Configuration)\ + x64\TestZlib$(Configuration)\Tmp\ + false + ia64\TestZlib$(Configuration)\ + ia64\TestZlib$(Configuration)\Tmp\ + true + false + x64\TestZlib$(Configuration)\ + x64\TestZlib$(Configuration)\Tmp\ + false + ia64\TestZlib$(Configuration)\ + ia64\TestZlib$(Configuration)\Tmp\ + false + false + x64\TestZlib$(Configuration)\ + x64\TestZlib$(Configuration)\Tmp\ + false + ia64\TestZlib$(Configuration)\ + ia64\TestZlib$(Configuration)\Tmp\ + false + false + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + + + + Disabled + ..\..\..;%(AdditionalIncludeDirectories) + ASMV;ASMINF;WIN32;ZLIB_WINAPI;_DEBUG;_CONSOLE;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;%(PreprocessorDefinitions) + true + Default + MultiThreadedDebug + false + + + AssemblyAndSourceCode + $(IntDir) + Level3 + EditAndContinue + + + ..\..\masmx86\match686.obj;..\..\masmx86\inffas32.obj;%(AdditionalDependencies) + $(OutDir)testzlib.exe + true + $(OutDir)testzlib.pdb + Console + false + + + MachineX86 + + + + + MaxSpeed + OnlyExplicitInline + true + ..\..\..;%(AdditionalIncludeDirectories) + WIN32;ZLIB_WINAPI;NDEBUG;_CONSOLE;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;%(PreprocessorDefinitions) + true + Default + MultiThreaded + false + true + + + $(IntDir) + Level3 + ProgramDatabase + + + $(OutDir)testzlib.exe + true + Console + true + true + false + + + MachineX86 + + + + + MaxSpeed + OnlyExplicitInline + true + ..\..\..;%(AdditionalIncludeDirectories) + ASMV;ASMINF;WIN32;ZLIB_WINAPI;NDEBUG;_CONSOLE;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;%(PreprocessorDefinitions) + true + Default + MultiThreaded + false + true + + + $(IntDir) + Level3 + ProgramDatabase + + + ..\..\masmx86\match686.obj;..\..\masmx86\inffas32.obj;%(AdditionalDependencies) + $(OutDir)testzlib.exe + true + Console + true + true + false + + + MachineX86 + + + + + ..\..\..;%(AdditionalIncludeDirectories) + ASMV;ASMINF;WIN32;ZLIB_WINAPI;_DEBUG;_CONSOLE;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;%(PreprocessorDefinitions) + Default + MultiThreadedDebugDLL + false + $(IntDir) + + + ..\..\masmx64\gvmat64.obj;..\..\masmx64\inffasx64.obj;%(AdditionalDependencies) + + + + + Itanium + + + Disabled + ..\..\..;%(AdditionalIncludeDirectories) + ZLIB_WINAPI;_DEBUG;_CONSOLE;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;WIN64;%(PreprocessorDefinitions) + true + Default + MultiThreadedDebugDLL + false + + + AssemblyAndSourceCode + $(IntDir) + Level3 + ProgramDatabase + + + $(OutDir)testzlib.exe + true + $(OutDir)testzlib.pdb + Console + MachineIA64 + + + + + ..\..\..;%(AdditionalIncludeDirectories) + WIN32;ZLIB_WINAPI;NDEBUG;_CONSOLE;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;%(PreprocessorDefinitions) + Default + MultiThreadedDLL + false + $(IntDir) + + + %(AdditionalDependencies) + + + + + Itanium + + + MaxSpeed + OnlyExplicitInline + true + ..\..\..;%(AdditionalIncludeDirectories) + ZLIB_WINAPI;NDEBUG;_CONSOLE;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;WIN64;%(PreprocessorDefinitions) + true + Default + MultiThreadedDLL + false + true + + + $(IntDir) + Level3 + ProgramDatabase + + + $(OutDir)testzlib.exe + true + Console + true + true + MachineIA64 + + + + + ..\..\..;%(AdditionalIncludeDirectories) + ASMV;ASMINF;WIN32;ZLIB_WINAPI;NDEBUG;_CONSOLE;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;%(PreprocessorDefinitions) + Default + MultiThreadedDLL + false + $(IntDir) + + + ..\..\masmx64\gvmat64.obj;..\..\masmx64\inffasx64.obj;%(AdditionalDependencies) + + + + + Itanium + + + MaxSpeed + OnlyExplicitInline + true + ..\..\..;%(AdditionalIncludeDirectories) + ZLIB_WINAPI;NDEBUG;_CONSOLE;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;WIN64;%(PreprocessorDefinitions) + true + Default + MultiThreadedDLL + false + true + + + $(IntDir) + Level3 + ProgramDatabase + + + $(OutDir)testzlib.exe + true + Console + true + true + MachineIA64 + + + + + + + + + + true + true + true + true + true + true + + + + + + + + + + + + + \ No newline at end of file diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/vstudio/vc10/testzlib.vcxproj.filters b/software/scsi2sd-util/zlib-1.2.8/contrib/vstudio/vc10/testzlib.vcxproj.filters new file mode 100644 index 0000000..3276491 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/vstudio/vc10/testzlib.vcxproj.filters @@ -0,0 +1,58 @@ + + + + + {c1f6a2e3-5da5-4955-8653-310d3efe05a9} + cpp;c;cxx;def;odl;idl;hpj;bat;asm + + + {c2aaffdc-2c95-4d6f-8466-4bec5890af2c} + h;hpp;hxx;hm;inl;inc + + + {c274fe07-05f2-461c-964b-f6341e4e7eb5} + rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe + + + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + \ No newline at end of file diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/vstudio/vc10/testzlibdll.vcxproj b/software/scsi2sd-util/zlib-1.2.8/contrib/vstudio/vc10/testzlibdll.vcxproj new file mode 100644 index 0000000..8e38876 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/vstudio/vc10/testzlibdll.vcxproj @@ -0,0 +1,310 @@ + + + + + Debug + Itanium + + + Debug + Win32 + + + Debug + x64 + + + Release + Itanium + + + Release + Win32 + + + Release + x64 + + + + {C52F9E7B-498A-42BE-8DB4-85A15694366A} + Win32Proj + + + + Application + MultiByte + + + Application + MultiByte + + + Application + MultiByte + + + Application + MultiByte + + + Application + MultiByte + + + Application + MultiByte + + + + + + + + + + + + + + + + + + + + + + + + + <_ProjectFileVersion>10.0.30128.1 + x86\TestZlibDll$(Configuration)\ + x86\TestZlibDll$(Configuration)\Tmp\ + true + false + x86\TestZlibDll$(Configuration)\ + x86\TestZlibDll$(Configuration)\Tmp\ + false + false + x64\TestZlibDll$(Configuration)\ + x64\TestZlibDll$(Configuration)\Tmp\ + true + false + ia64\TestZlibDll$(Configuration)\ + ia64\TestZlibDll$(Configuration)\Tmp\ + true + false + x64\TestZlibDll$(Configuration)\ + x64\TestZlibDll$(Configuration)\Tmp\ + false + false + ia64\TestZlibDll$(Configuration)\ + ia64\TestZlibDll$(Configuration)\Tmp\ + false + false + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + + + + Disabled + ..\..\..;..\..\minizip;%(AdditionalIncludeDirectories) + WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;_DEBUG;_CONSOLE;%(PreprocessorDefinitions) + true + Default + MultiThreadedDebug + false + + + $(IntDir) + Level3 + EditAndContinue + + + x86\ZlibDllDebug\zlibwapi.lib;%(AdditionalDependencies) + $(OutDir)testzlibdll.exe + true + $(OutDir)testzlib.pdb + Console + false + + + MachineX86 + + + + + MaxSpeed + OnlyExplicitInline + true + ..\..\..;..\..\minizip;%(AdditionalIncludeDirectories) + WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;NDEBUG;_CONSOLE;%(PreprocessorDefinitions) + true + Default + MultiThreaded + false + true + + + $(IntDir) + Level3 + ProgramDatabase + + + x86\ZlibDllRelease\zlibwapi.lib;%(AdditionalDependencies) + $(OutDir)testzlibdll.exe + true + Console + true + true + false + + + MachineX86 + + + + + X64 + + + Disabled + ..\..\..;..\..\minizip;%(AdditionalIncludeDirectories) + _CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;_DEBUG;_CONSOLE;WIN64;%(PreprocessorDefinitions) + true + Default + MultiThreadedDebugDLL + false + + + $(IntDir) + Level3 + ProgramDatabase + + + x64\ZlibDllDebug\zlibwapi.lib;%(AdditionalDependencies) + $(OutDir)testzlibdll.exe + true + $(OutDir)testzlib.pdb + Console + MachineX64 + + + + + Itanium + + + Disabled + ..\..\..;..\..\minizip;%(AdditionalIncludeDirectories) + _CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;_DEBUG;_CONSOLE;WIN64;%(PreprocessorDefinitions) + true + Default + MultiThreadedDebugDLL + false + + + $(IntDir) + Level3 + ProgramDatabase + + + ia64\ZlibDllDebug\zlibwapi.lib;%(AdditionalDependencies) + $(OutDir)testzlibdll.exe + true + $(OutDir)testzlib.pdb + Console + MachineIA64 + + + + + X64 + + + MaxSpeed + OnlyExplicitInline + true + ..\..\..;..\..\minizip;%(AdditionalIncludeDirectories) + _CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;NDEBUG;_CONSOLE;WIN64;%(PreprocessorDefinitions) + true + Default + MultiThreadedDLL + false + true + + + $(IntDir) + Level3 + ProgramDatabase + + + x64\ZlibDllRelease\zlibwapi.lib;%(AdditionalDependencies) + $(OutDir)testzlibdll.exe + true + Console + true + true + MachineX64 + + + + + Itanium + + + MaxSpeed + OnlyExplicitInline + true + ..\..\..;..\..\minizip;%(AdditionalIncludeDirectories) + _CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;NDEBUG;_CONSOLE;WIN64;%(PreprocessorDefinitions) + true + Default + MultiThreadedDLL + false + true + + + $(IntDir) + Level3 + ProgramDatabase + + + ia64\ZlibDllRelease\zlibwapi.lib;%(AdditionalDependencies) + $(OutDir)testzlibdll.exe + true + Console + true + true + MachineIA64 + + + + + + + + {8fd826f8-3739-44e6-8cc8-997122e53b8d} + + + + + + \ No newline at end of file diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/vstudio/vc10/testzlibdll.vcxproj.filters b/software/scsi2sd-util/zlib-1.2.8/contrib/vstudio/vc10/testzlibdll.vcxproj.filters new file mode 100644 index 0000000..ab87f09 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/vstudio/vc10/testzlibdll.vcxproj.filters @@ -0,0 +1,22 @@ + + + + + {fa61a89f-93fc-4c89-b29e-36224b7592f4} + cpp;c;cxx;def;odl;idl;hpj;bat;asm + + + {d4b85da0-2ba2-4934-b57f-e2584e3848ee} + h;hpp;hxx;hm;inl;inc + + + {e573e075-00bd-4a7d-bd67-a8cc9bfc5aca} + rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe + + + + + Source Files + + + \ No newline at end of file diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/vstudio/vc10/zlib.rc b/software/scsi2sd-util/zlib-1.2.8/contrib/vstudio/vc10/zlib.rc new file mode 100644 index 0000000..d42f191 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/vstudio/vc10/zlib.rc @@ -0,0 +1,32 @@ +#include + +#define IDR_VERSION1 1 +IDR_VERSION1 VERSIONINFO MOVEABLE IMPURE LOADONCALL DISCARDABLE + FILEVERSION 1,2,8,0 + PRODUCTVERSION 1,2,8,0 + FILEFLAGSMASK VS_FFI_FILEFLAGSMASK + FILEFLAGS 0 + FILEOS VOS_DOS_WINDOWS32 + FILETYPE VFT_DLL + FILESUBTYPE 0 // not used +BEGIN + BLOCK "StringFileInfo" + BEGIN + BLOCK "040904E4" + //language ID = U.S. English, char set = Windows, Multilingual + + BEGIN + VALUE "FileDescription", "zlib data compression and ZIP file I/O library\0" + VALUE "FileVersion", "1.2.8\0" + VALUE "InternalName", "zlib\0" + VALUE "OriginalFilename", "zlibwapi.dll\0" + VALUE "ProductName", "ZLib.DLL\0" + VALUE "Comments","DLL support by Alessandro Iacopetti & Gilles Vollant\0" + VALUE "LegalCopyright", "(C) 1995-2013 Jean-loup Gailly & Mark Adler\0" + END + END + BLOCK "VarFileInfo" + BEGIN + VALUE "Translation", 0x0409, 1252 + END +END diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/vstudio/vc10/zlibstat.vcxproj b/software/scsi2sd-util/zlib-1.2.8/contrib/vstudio/vc10/zlibstat.vcxproj new file mode 100644 index 0000000..45389a3 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/vstudio/vc10/zlibstat.vcxproj @@ -0,0 +1,473 @@ + + + + + Debug + Itanium + + + Debug + Win32 + + + Debug + x64 + + + ReleaseWithoutAsm + Itanium + + + ReleaseWithoutAsm + Win32 + + + ReleaseWithoutAsm + x64 + + + Release + Itanium + + + Release + Win32 + + + Release + x64 + + + + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8} + + + + StaticLibrary + false + + + StaticLibrary + false + + + StaticLibrary + false + + + StaticLibrary + false + + + StaticLibrary + false + + + StaticLibrary + false + + + StaticLibrary + false + + + StaticLibrary + false + + + StaticLibrary + false + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + <_ProjectFileVersion>10.0.30128.1 + x86\ZlibStat$(Configuration)\ + x86\ZlibStat$(Configuration)\Tmp\ + x86\ZlibStat$(Configuration)\ + x86\ZlibStat$(Configuration)\Tmp\ + x86\ZlibStat$(Configuration)\ + x86\ZlibStat$(Configuration)\Tmp\ + x64\ZlibStat$(Configuration)\ + x64\ZlibStat$(Configuration)\Tmp\ + ia64\ZlibStat$(Configuration)\ + ia64\ZlibStat$(Configuration)\Tmp\ + x64\ZlibStat$(Configuration)\ + x64\ZlibStat$(Configuration)\Tmp\ + ia64\ZlibStat$(Configuration)\ + ia64\ZlibStat$(Configuration)\Tmp\ + x64\ZlibStat$(Configuration)\ + x64\ZlibStat$(Configuration)\Tmp\ + ia64\ZlibStat$(Configuration)\ + ia64\ZlibStat$(Configuration)\Tmp\ + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + + + + Disabled + ..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories) + WIN32;ZLIB_WINAPI;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;%(PreprocessorDefinitions) + + + MultiThreadedDebug + false + $(IntDir)zlibstat.pch + $(IntDir) + $(IntDir) + $(OutDir) + Level3 + true + OldStyle + + + 0x040c + + + /MACHINE:X86 /NODEFAULTLIB %(AdditionalOptions) + $(OutDir)zlibstat.lib + true + + + cd ..\..\masmx86 +bld_ml32.bat + + + + + OnlyExplicitInline + ..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories) + WIN32;ZLIB_WINAPI;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;ASMV;ASMINF;%(PreprocessorDefinitions) + true + + + MultiThreaded + false + true + $(IntDir)zlibstat.pch + $(IntDir) + $(IntDir) + $(OutDir) + Level3 + true + + + 0x040c + + + /MACHINE:X86 /NODEFAULTLIB %(AdditionalOptions) + ..\..\masmx86\match686.obj;..\..\masmx86\inffas32.obj;%(AdditionalDependencies) + $(OutDir)zlibstat.lib + true + + + cd ..\..\masmx86 +bld_ml32.bat + + + + + OnlyExplicitInline + ..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories) + WIN32;ZLIB_WINAPI;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;%(PreprocessorDefinitions) + true + + + MultiThreaded + false + true + $(IntDir)zlibstat.pch + $(IntDir) + $(IntDir) + $(OutDir) + Level3 + true + + + 0x040c + + + /MACHINE:X86 /NODEFAULTLIB %(AdditionalOptions) + $(OutDir)zlibstat.lib + true + + + + + X64 + + + Disabled + ..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories) + ZLIB_WINAPI;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;WIN64;%(PreprocessorDefinitions) + + + MultiThreadedDebugDLL + false + $(IntDir)zlibstat.pch + $(IntDir) + $(IntDir) + $(OutDir) + Level3 + true + OldStyle + + + 0x040c + + + /MACHINE:AMD64 /NODEFAULTLIB %(AdditionalOptions) + $(OutDir)zlibstat.lib + true + + + cd ..\..\masmx64 +bld_ml64.bat + + + + + Itanium + + + Disabled + ..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories) + ZLIB_WINAPI;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;WIN64;%(PreprocessorDefinitions) + + + MultiThreadedDebugDLL + false + $(IntDir)zlibstat.pch + $(IntDir) + $(IntDir) + $(OutDir) + Level3 + true + OldStyle + + + 0x040c + + + /MACHINE:IA64 /NODEFAULTLIB %(AdditionalOptions) + $(OutDir)zlibstat.lib + true + + + + + X64 + + + OnlyExplicitInline + ..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories) + ZLIB_WINAPI;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;ASMV;ASMINF;WIN64;%(PreprocessorDefinitions) + true + + + MultiThreadedDLL + false + true + $(IntDir)zlibstat.pch + $(IntDir) + $(IntDir) + $(OutDir) + Level3 + true + + + 0x040c + + + /MACHINE:AMD64 /NODEFAULTLIB %(AdditionalOptions) + ..\..\masmx64\gvmat64.obj;..\..\masmx64\inffasx64.obj;%(AdditionalDependencies) + $(OutDir)zlibstat.lib + true + + + cd ..\..\masmx64 +bld_ml64.bat + + + + + Itanium + + + OnlyExplicitInline + ..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories) + ZLIB_WINAPI;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;WIN64;%(PreprocessorDefinitions) + true + + + MultiThreadedDLL + false + true + $(IntDir)zlibstat.pch + $(IntDir) + $(IntDir) + $(OutDir) + Level3 + true + + + 0x040c + + + /MACHINE:IA64 /NODEFAULTLIB %(AdditionalOptions) + $(OutDir)zlibstat.lib + true + + + + + X64 + + + OnlyExplicitInline + ..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories) + ZLIB_WINAPI;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;WIN64;%(PreprocessorDefinitions) + true + + + MultiThreadedDLL + false + true + $(IntDir)zlibstat.pch + $(IntDir) + $(IntDir) + $(OutDir) + Level3 + true + + + 0x040c + + + /MACHINE:AMD64 /NODEFAULTLIB %(AdditionalOptions) + $(OutDir)zlibstat.lib + true + + + + + Itanium + + + OnlyExplicitInline + ..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories) + ZLIB_WINAPI;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;WIN64;%(PreprocessorDefinitions) + true + + + MultiThreadedDLL + false + true + $(IntDir)zlibstat.pch + $(IntDir) + $(IntDir) + $(OutDir) + Level3 + true + + + 0x040c + + + /MACHINE:IA64 /NODEFAULTLIB %(AdditionalOptions) + $(OutDir)zlibstat.lib + true + + + + + + + + + + + + + + true + true + true + true + true + true + + + + + + + + + + + + + + + + + + + + + \ No newline at end of file diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/vstudio/vc10/zlibstat.vcxproj.filters b/software/scsi2sd-util/zlib-1.2.8/contrib/vstudio/vc10/zlibstat.vcxproj.filters new file mode 100644 index 0000000..0c8b250 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/vstudio/vc10/zlibstat.vcxproj.filters @@ -0,0 +1,77 @@ + + + + + {174213f6-7f66-4ae8-a3a8-a1e0a1e6ffdd} + + + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + + + Source Files + + + + + Source Files + + + \ No newline at end of file diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/vstudio/vc10/zlibvc.def b/software/scsi2sd-util/zlib-1.2.8/contrib/vstudio/vc10/zlibvc.def new file mode 100644 index 0000000..980fed3 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/vstudio/vc10/zlibvc.def @@ -0,0 +1,143 @@ +LIBRARY +; zlib data compression and ZIP file I/O library + +VERSION 1.2.8 + +EXPORTS + adler32 @1 + compress @2 + crc32 @3 + deflate @4 + deflateCopy @5 + deflateEnd @6 + deflateInit2_ @7 + deflateInit_ @8 + deflateParams @9 + deflateReset @10 + deflateSetDictionary @11 + gzclose @12 + gzdopen @13 + gzerror @14 + gzflush @15 + gzopen @16 + gzread @17 + gzwrite @18 + inflate @19 + inflateEnd @20 + inflateInit2_ @21 + inflateInit_ @22 + inflateReset @23 + inflateSetDictionary @24 + inflateSync @25 + uncompress @26 + zlibVersion @27 + gzprintf @28 + gzputc @29 + gzgetc @30 + gzseek @31 + gzrewind @32 + gztell @33 + gzeof @34 + gzsetparams @35 + zError @36 + inflateSyncPoint @37 + get_crc_table @38 + compress2 @39 + gzputs @40 + gzgets @41 + inflateCopy @42 + inflateBackInit_ @43 + inflateBack @44 + inflateBackEnd @45 + compressBound @46 + deflateBound @47 + gzclearerr @48 + gzungetc @49 + zlibCompileFlags @50 + deflatePrime @51 + deflatePending @52 + + unzOpen @61 + unzClose @62 + unzGetGlobalInfo @63 + unzGetCurrentFileInfo @64 + unzGoToFirstFile @65 + unzGoToNextFile @66 + unzOpenCurrentFile @67 + unzReadCurrentFile @68 + unzOpenCurrentFile3 @69 + unztell @70 + unzeof @71 + unzCloseCurrentFile @72 + unzGetGlobalComment @73 + unzStringFileNameCompare @74 + unzLocateFile @75 + unzGetLocalExtrafield @76 + unzOpen2 @77 + unzOpenCurrentFile2 @78 + unzOpenCurrentFilePassword @79 + + zipOpen @80 + zipOpenNewFileInZip @81 + zipWriteInFileInZip @82 + zipCloseFileInZip @83 + zipClose @84 + zipOpenNewFileInZip2 @86 + zipCloseFileInZipRaw @87 + zipOpen2 @88 + zipOpenNewFileInZip3 @89 + + unzGetFilePos @100 + unzGoToFilePos @101 + + fill_win32_filefunc @110 + +; zlibwapi v1.2.4 added: + fill_win32_filefunc64 @111 + fill_win32_filefunc64A @112 + fill_win32_filefunc64W @113 + + unzOpen64 @120 + unzOpen2_64 @121 + unzGetGlobalInfo64 @122 + unzGetCurrentFileInfo64 @124 + unzGetCurrentFileZStreamPos64 @125 + unztell64 @126 + unzGetFilePos64 @127 + unzGoToFilePos64 @128 + + zipOpen64 @130 + zipOpen2_64 @131 + zipOpenNewFileInZip64 @132 + zipOpenNewFileInZip2_64 @133 + zipOpenNewFileInZip3_64 @134 + zipOpenNewFileInZip4_64 @135 + zipCloseFileInZipRaw64 @136 + +; zlib1 v1.2.4 added: + adler32_combine @140 + crc32_combine @142 + deflateSetHeader @144 + deflateTune @145 + gzbuffer @146 + gzclose_r @147 + gzclose_w @148 + gzdirect @149 + gzoffset @150 + inflateGetHeader @156 + inflateMark @157 + inflatePrime @158 + inflateReset2 @159 + inflateUndermine @160 + +; zlib1 v1.2.6 added: + gzgetc_ @161 + inflateResetKeep @163 + deflateResetKeep @164 + +; zlib1 v1.2.7 added: + gzopen_w @165 + +; zlib1 v1.2.8 added: + inflateGetDictionary @166 + gzvprintf @167 diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/vstudio/vc10/zlibvc.sln b/software/scsi2sd-util/zlib-1.2.8/contrib/vstudio/vc10/zlibvc.sln new file mode 100644 index 0000000..649f40c --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/vstudio/vc10/zlibvc.sln @@ -0,0 +1,135 @@ + +Microsoft Visual Studio Solution File, Format Version 11.00 +# Visual Studio 2010 +Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "zlibvc", "zlibvc.vcxproj", "{8FD826F8-3739-44E6-8CC8-997122E53B8D}" +EndProject +Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "zlibstat", "zlibstat.vcxproj", "{745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}" +EndProject +Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "testzlib", "testzlib.vcxproj", "{AA6666AA-E09F-4135-9C0C-4FE50C3C654B}" +EndProject +Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "testzlibdll", "testzlibdll.vcxproj", "{C52F9E7B-498A-42BE-8DB4-85A15694366A}" +EndProject +Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "minizip", "minizip.vcxproj", "{48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}" +EndProject +Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "miniunz", "miniunz.vcxproj", "{C52F9E7B-498A-42BE-8DB4-85A15694382A}" +EndProject +Global + GlobalSection(SolutionConfigurationPlatforms) = preSolution + Debug|Itanium = Debug|Itanium + Debug|Win32 = Debug|Win32 + Debug|x64 = Debug|x64 + Release|Itanium = Release|Itanium + Release|Win32 = Release|Win32 + Release|x64 = Release|x64 + ReleaseWithoutAsm|Itanium = ReleaseWithoutAsm|Itanium + ReleaseWithoutAsm|Win32 = ReleaseWithoutAsm|Win32 + ReleaseWithoutAsm|x64 = ReleaseWithoutAsm|x64 + EndGlobalSection + GlobalSection(ProjectConfigurationPlatforms) = postSolution + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Debug|Itanium.ActiveCfg = Debug|Itanium + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Debug|Itanium.Build.0 = Debug|Itanium + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Debug|Win32.ActiveCfg = Debug|Win32 + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Debug|Win32.Build.0 = Debug|Win32 + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Debug|x64.ActiveCfg = Debug|x64 + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Debug|x64.Build.0 = Debug|x64 + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Release|Itanium.ActiveCfg = Release|Itanium + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Release|Itanium.Build.0 = Release|Itanium + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Release|Win32.ActiveCfg = Release|Win32 + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Release|Win32.Build.0 = Release|Win32 + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Release|x64.ActiveCfg = Release|x64 + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Release|x64.Build.0 = Release|x64 + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.ReleaseWithoutAsm|Itanium.ActiveCfg = ReleaseWithoutAsm|Itanium + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.ReleaseWithoutAsm|Itanium.Build.0 = ReleaseWithoutAsm|Itanium + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.ReleaseWithoutAsm|Win32.ActiveCfg = ReleaseWithoutAsm|Win32 + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.ReleaseWithoutAsm|Win32.Build.0 = ReleaseWithoutAsm|Win32 + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.ReleaseWithoutAsm|x64.ActiveCfg = ReleaseWithoutAsm|x64 + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.ReleaseWithoutAsm|x64.Build.0 = ReleaseWithoutAsm|x64 + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Debug|Itanium.ActiveCfg = Debug|Itanium + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Debug|Itanium.Build.0 = Debug|Itanium + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Debug|Win32.ActiveCfg = Debug|Win32 + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Debug|Win32.Build.0 = Debug|Win32 + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Debug|x64.ActiveCfg = Debug|x64 + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Debug|x64.Build.0 = Debug|x64 + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Release|Itanium.ActiveCfg = Release|Itanium + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Release|Itanium.Build.0 = Release|Itanium + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Release|Win32.ActiveCfg = Release|Win32 + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Release|Win32.Build.0 = Release|Win32 + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Release|x64.ActiveCfg = Release|x64 + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Release|x64.Build.0 = Release|x64 + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.ReleaseWithoutAsm|Itanium.ActiveCfg = ReleaseWithoutAsm|Itanium + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.ReleaseWithoutAsm|Itanium.Build.0 = ReleaseWithoutAsm|Itanium + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.ReleaseWithoutAsm|Win32.ActiveCfg = ReleaseWithoutAsm|Win32 + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.ReleaseWithoutAsm|Win32.Build.0 = ReleaseWithoutAsm|Win32 + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.ReleaseWithoutAsm|x64.ActiveCfg = ReleaseWithoutAsm|x64 + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.ReleaseWithoutAsm|x64.Build.0 = ReleaseWithoutAsm|x64 + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Debug|Itanium.ActiveCfg = Debug|Itanium + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Debug|Itanium.Build.0 = Debug|Itanium + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Debug|Win32.ActiveCfg = Debug|Win32 + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Debug|Win32.Build.0 = Debug|Win32 + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Debug|x64.ActiveCfg = Debug|x64 + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Debug|x64.Build.0 = Debug|x64 + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Release|Itanium.ActiveCfg = Release|Itanium + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Release|Itanium.Build.0 = Release|Itanium + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Release|Win32.ActiveCfg = Release|Win32 + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Release|Win32.Build.0 = Release|Win32 + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Release|x64.ActiveCfg = Release|x64 + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Release|x64.Build.0 = Release|x64 + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|Itanium.ActiveCfg = ReleaseWithoutAsm|Itanium + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|Itanium.Build.0 = ReleaseWithoutAsm|Itanium + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|Win32.ActiveCfg = ReleaseWithoutAsm|Win32 + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|Win32.Build.0 = ReleaseWithoutAsm|Win32 + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|x64.ActiveCfg = ReleaseWithoutAsm|x64 + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|x64.Build.0 = ReleaseWithoutAsm|x64 + {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Debug|Itanium.ActiveCfg = Debug|Itanium + {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Debug|Itanium.Build.0 = Debug|Itanium + {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Debug|Win32.ActiveCfg = Debug|Win32 + {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Debug|Win32.Build.0 = Debug|Win32 + {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Debug|x64.ActiveCfg = Debug|x64 + {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Debug|x64.Build.0 = Debug|x64 + {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Release|Itanium.ActiveCfg = Release|Itanium + {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Release|Itanium.Build.0 = Release|Itanium + {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Release|Win32.ActiveCfg = Release|Win32 + {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Release|Win32.Build.0 = Release|Win32 + {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Release|x64.ActiveCfg = Release|x64 + {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Release|x64.Build.0 = Release|x64 + {C52F9E7B-498A-42BE-8DB4-85A15694366A}.ReleaseWithoutAsm|Itanium.ActiveCfg = Release|Itanium + {C52F9E7B-498A-42BE-8DB4-85A15694366A}.ReleaseWithoutAsm|Itanium.Build.0 = Release|Itanium + {C52F9E7B-498A-42BE-8DB4-85A15694366A}.ReleaseWithoutAsm|Win32.ActiveCfg = Release|Win32 + {C52F9E7B-498A-42BE-8DB4-85A15694366A}.ReleaseWithoutAsm|x64.ActiveCfg = Release|x64 + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Debug|Itanium.ActiveCfg = Debug|Itanium + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Debug|Itanium.Build.0 = Debug|Itanium + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Debug|Win32.ActiveCfg = Debug|Win32 + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Debug|Win32.Build.0 = Debug|Win32 + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Debug|x64.ActiveCfg = Debug|x64 + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Debug|x64.Build.0 = Debug|x64 + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Release|Itanium.ActiveCfg = Release|Itanium + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Release|Itanium.Build.0 = Release|Itanium + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Release|Win32.ActiveCfg = Release|Win32 + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Release|Win32.Build.0 = Release|Win32 + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Release|x64.ActiveCfg = Release|x64 + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Release|x64.Build.0 = Release|x64 + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|Itanium.ActiveCfg = Release|Itanium + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|Itanium.Build.0 = Release|Itanium + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|Win32.ActiveCfg = Release|Win32 + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|x64.ActiveCfg = Release|x64 + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Debug|Itanium.ActiveCfg = Debug|Itanium + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Debug|Itanium.Build.0 = Debug|Itanium + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Debug|Win32.ActiveCfg = Debug|Win32 + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Debug|Win32.Build.0 = Debug|Win32 + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Debug|x64.ActiveCfg = Debug|x64 + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Debug|x64.Build.0 = Debug|x64 + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Release|Itanium.ActiveCfg = Release|Itanium + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Release|Itanium.Build.0 = Release|Itanium + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Release|Win32.ActiveCfg = Release|Win32 + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Release|Win32.Build.0 = Release|Win32 + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Release|x64.ActiveCfg = Release|x64 + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Release|x64.Build.0 = Release|x64 + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.ReleaseWithoutAsm|Itanium.ActiveCfg = Release|Itanium + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.ReleaseWithoutAsm|Itanium.Build.0 = Release|Itanium + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.ReleaseWithoutAsm|Win32.ActiveCfg = Release|Win32 + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.ReleaseWithoutAsm|x64.ActiveCfg = Release|x64 + EndGlobalSection + GlobalSection(SolutionProperties) = preSolution + HideSolutionNode = FALSE + EndGlobalSection +EndGlobal diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/vstudio/vc10/zlibvc.vcxproj b/software/scsi2sd-util/zlib-1.2.8/contrib/vstudio/vc10/zlibvc.vcxproj new file mode 100644 index 0000000..7d7c49a --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/vstudio/vc10/zlibvc.vcxproj @@ -0,0 +1,657 @@ + + + + + Debug + Itanium + + + Debug + Win32 + + + Debug + x64 + + + ReleaseWithoutAsm + Itanium + + + ReleaseWithoutAsm + Win32 + + + ReleaseWithoutAsm + x64 + + + Release + Itanium + + + Release + Win32 + + + Release + x64 + + + + {8FD826F8-3739-44E6-8CC8-997122E53B8D} + + + + DynamicLibrary + false + true + + + DynamicLibrary + false + true + + + DynamicLibrary + false + + + DynamicLibrary + false + true + + + DynamicLibrary + false + true + + + DynamicLibrary + false + + + DynamicLibrary + false + true + + + DynamicLibrary + false + true + + + DynamicLibrary + false + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + <_ProjectFileVersion>10.0.30128.1 + x86\ZlibDll$(Configuration)\ + x86\ZlibDll$(Configuration)\Tmp\ + true + false + x86\ZlibDll$(Configuration)\ + x86\ZlibDll$(Configuration)\Tmp\ + false + false + x86\ZlibDll$(Configuration)\ + x86\ZlibDll$(Configuration)\Tmp\ + false + false + x64\ZlibDll$(Configuration)\ + x64\ZlibDll$(Configuration)\Tmp\ + true + false + ia64\ZlibDll$(Configuration)\ + ia64\ZlibDll$(Configuration)\Tmp\ + true + false + x64\ZlibDll$(Configuration)\ + x64\ZlibDll$(Configuration)\Tmp\ + false + false + ia64\ZlibDll$(Configuration)\ + ia64\ZlibDll$(Configuration)\Tmp\ + false + false + x64\ZlibDll$(Configuration)\ + x64\ZlibDll$(Configuration)\Tmp\ + false + false + ia64\ZlibDll$(Configuration)\ + ia64\ZlibDll$(Configuration)\Tmp\ + false + false + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + zlibwapid + zlibwapi + zlibwapi + zlibwapid + zlibwapi + zlibwapi + + + + _DEBUG;%(PreprocessorDefinitions) + true + true + Win32 + $(OutDir)zlibvc.tlb + + + Disabled + ..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories) + WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;ZLIB_WINAPI;ASMV;ASMINF;%(PreprocessorDefinitions) + + + MultiThreadedDebug + false + $(IntDir)zlibvc.pch + $(IntDir) + $(IntDir) + $(OutDir) + + + Level3 + true + EditAndContinue + + + _DEBUG;%(PreprocessorDefinitions) + 0x040c + + + /MACHINE:I386 %(AdditionalOptions) + ..\..\masmx86\match686.obj;..\..\masmx86\inffas32.obj;%(AdditionalDependencies) + true + .\zlibvc.def + true + true + Windows + false + + + + + cd ..\..\masmx86 +bld_ml32.bat + + + + + NDEBUG;%(PreprocessorDefinitions) + true + true + Win32 + $(OutDir)zlibvc.tlb + + + OnlyExplicitInline + ..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories) + WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;ZLIB_WINAPI;%(PreprocessorDefinitions) + true + + + MultiThreadedDLL + false + true + $(IntDir)zlibvc.pch + All + $(IntDir) + $(IntDir) + $(OutDir) + + + Level3 + true + + + NDEBUG;%(PreprocessorDefinitions) + 0x040c + + + /MACHINE:I386 %(AdditionalOptions) + true + false + .\zlibvc.def + true + Windows + false + + + + + + + NDEBUG;%(PreprocessorDefinitions) + true + true + Win32 + $(OutDir)zlibvc.tlb + + + OnlyExplicitInline + ..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories) + WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;ZLIB_WINAPI;ASMV;ASMINF;%(PreprocessorDefinitions) + true + + + MultiThreaded + false + true + $(IntDir)zlibvc.pch + All + $(IntDir) + $(IntDir) + $(OutDir) + + + Level3 + true + + + NDEBUG;%(PreprocessorDefinitions) + 0x040c + + + /MACHINE:I386 %(AdditionalOptions) + ..\..\masmx86\match686.obj;..\..\masmx86\inffas32.obj;%(AdditionalDependencies) + true + false + .\zlibvc.def + true + Windows + false + + + + + cd ..\..\masmx86 +bld_ml32.bat + + + + + _DEBUG;%(PreprocessorDefinitions) + true + true + X64 + $(OutDir)zlibvc.tlb + + + Disabled + ..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories) + WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;ZLIB_WINAPI;ASMV;ASMINF;WIN64;%(PreprocessorDefinitions) + + + MultiThreadedDebugDLL + false + $(IntDir)zlibvc.pch + $(IntDir) + $(IntDir) + $(OutDir) + + + Level3 + true + ProgramDatabase + + + _DEBUG;%(PreprocessorDefinitions) + 0x040c + + + ..\..\masmx64\gvmat64.obj;..\..\masmx64\inffasx64.obj;%(AdditionalDependencies) + true + .\zlibvc.def + true + true + Windows + MachineX64 + + + cd ..\..\masmx64 +bld_ml64.bat + + + + + _DEBUG;%(PreprocessorDefinitions) + true + true + Itanium + $(OutDir)zlibvc.tlb + + + Disabled + ..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories) + WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;ZLIB_WINAPI;WIN64;%(PreprocessorDefinitions) + + + MultiThreadedDebugDLL + false + $(IntDir)zlibvc.pch + $(IntDir) + $(IntDir) + $(OutDir) + + + Level3 + true + ProgramDatabase + + + _DEBUG;%(PreprocessorDefinitions) + 0x040c + + + $(OutDir)zlibwapi.dll + true + .\zlibvc.def + true + $(OutDir)zlibwapi.pdb + true + $(OutDir)zlibwapi.map + Windows + $(OutDir)zlibwapi.lib + MachineIA64 + + + + + NDEBUG;%(PreprocessorDefinitions) + true + true + X64 + $(OutDir)zlibvc.tlb + + + OnlyExplicitInline + ..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories) + WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;ZLIB_WINAPI;WIN64;%(PreprocessorDefinitions) + true + + + MultiThreadedDLL + false + true + $(IntDir)zlibvc.pch + All + $(IntDir) + $(IntDir) + $(OutDir) + + + Level3 + true + + + NDEBUG;%(PreprocessorDefinitions) + 0x040c + + + true + false + .\zlibvc.def + true + Windows + MachineX64 + + + + + NDEBUG;%(PreprocessorDefinitions) + true + true + Itanium + $(OutDir)zlibvc.tlb + + + OnlyExplicitInline + ..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories) + WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;ZLIB_WINAPI;WIN64;%(PreprocessorDefinitions) + true + + + MultiThreadedDLL + false + true + $(IntDir)zlibvc.pch + All + $(IntDir) + $(IntDir) + $(OutDir) + + + Level3 + true + + + NDEBUG;%(PreprocessorDefinitions) + 0x040c + + + $(OutDir)zlibwapi.dll + true + false + .\zlibvc.def + $(OutDir)zlibwapi.pdb + true + $(OutDir)zlibwapi.map + Windows + $(OutDir)zlibwapi.lib + MachineIA64 + + + + + NDEBUG;%(PreprocessorDefinitions) + true + true + X64 + $(OutDir)zlibvc.tlb + + + OnlyExplicitInline + ..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories) + _CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;ZLIB_WINAPI;ASMV;ASMINF;WIN64;%(PreprocessorDefinitions) + true + + + MultiThreadedDLL + false + true + $(IntDir)zlibvc.pch + All + $(IntDir) + $(IntDir) + $(OutDir) + + + Level3 + true + + + NDEBUG;%(PreprocessorDefinitions) + 0x040c + + + ..\..\masmx64\gvmat64.obj;..\..\masmx64\inffasx64.obj;%(AdditionalDependencies) + true + false + .\zlibvc.def + true + Windows + MachineX64 + + + cd ..\..\masmx64 +bld_ml64.bat + + + + + NDEBUG;%(PreprocessorDefinitions) + true + true + Itanium + $(OutDir)zlibvc.tlb + + + OnlyExplicitInline + ..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories) + _CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;ZLIB_WINAPI;WIN64;%(PreprocessorDefinitions) + true + + + MultiThreadedDLL + false + true + $(IntDir)zlibvc.pch + All + $(IntDir) + $(IntDir) + $(OutDir) + + + Level3 + true + + + NDEBUG;%(PreprocessorDefinitions) + 0x040c + + + $(OutDir)zlibwapi.dll + true + false + .\zlibvc.def + $(OutDir)zlibwapi.pdb + true + $(OutDir)zlibwapi.map + Windows + $(OutDir)zlibwapi.lib + MachineIA64 + + + + + + + + + + + + + + true + true + true + true + true + true + + + + + + + + + + %(AdditionalIncludeDirectories) + ZLIB_INTERNAL;%(PreprocessorDefinitions) + %(AdditionalIncludeDirectories) + ZLIB_INTERNAL;%(PreprocessorDefinitions) + %(AdditionalIncludeDirectories) + ZLIB_INTERNAL;%(PreprocessorDefinitions) + + + %(AdditionalIncludeDirectories) + ZLIB_INTERNAL;%(PreprocessorDefinitions) + %(AdditionalIncludeDirectories) + ZLIB_INTERNAL;%(PreprocessorDefinitions) + %(AdditionalIncludeDirectories) + ZLIB_INTERNAL;%(PreprocessorDefinitions) + + + + + + + + + + + + + + + + + + + + + + + + \ No newline at end of file diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/vstudio/vc10/zlibvc.vcxproj.filters b/software/scsi2sd-util/zlib-1.2.8/contrib/vstudio/vc10/zlibvc.vcxproj.filters new file mode 100644 index 0000000..2278682 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/vstudio/vc10/zlibvc.vcxproj.filters @@ -0,0 +1,118 @@ + + + + + {07934a85-8b61-443d-a0ee-b2eedb74f3cd} + cpp;c;cxx;rc;def;r;odl;hpj;bat;for;f90 + + + {1d99675b-433d-4a21-9e50-ed4ab8b19762} + h;hpp;hxx;hm;inl;fi;fd + + + {431c0958-fa71-44d0-9084-2d19d100c0cc} + ico;cur;bmp;dlg;rc2;rct;bin;cnt;rtf;gif;jpg;jpeg;jpe + + + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + Source Files + + + + + Source Files + + + + + Source Files + + + + + Header Files + + + Header Files + + + Header Files + + + Header Files + + + Header Files + + + Header Files + + + Header Files + + + Header Files + + + Header Files + + + \ No newline at end of file diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/vstudio/vc11/miniunz.vcxproj b/software/scsi2sd-util/zlib-1.2.8/contrib/vstudio/vc11/miniunz.vcxproj new file mode 100644 index 0000000..99be63d --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/vstudio/vc11/miniunz.vcxproj @@ -0,0 +1,314 @@ + + + + + Debug + Itanium + + + Debug + Win32 + + + Debug + x64 + + + Release + Itanium + + + Release + Win32 + + + Release + x64 + + + + {C52F9E7B-498A-42BE-8DB4-85A15694382A} + Win32Proj + + + + Application + MultiByte + v110 + + + Application + Unicode + v110 + + + Application + MultiByte + + + Application + MultiByte + + + Application + MultiByte + v110 + + + Application + MultiByte + v110 + + + + + + + + + + + + + + + + + + + + + + + + + <_ProjectFileVersion>10.0.30128.1 + x86\MiniUnzip$(Configuration)\ + x86\MiniUnzip$(Configuration)\Tmp\ + true + false + x86\MiniUnzip$(Configuration)\ + x86\MiniUnzip$(Configuration)\Tmp\ + false + false + x64\MiniUnzip$(Configuration)\ + x64\MiniUnzip$(Configuration)\Tmp\ + true + false + ia64\MiniUnzip$(Configuration)\ + ia64\MiniUnzip$(Configuration)\Tmp\ + true + false + x64\MiniUnzip$(Configuration)\ + x64\MiniUnzip$(Configuration)\Tmp\ + false + false + ia64\MiniUnzip$(Configuration)\ + ia64\MiniUnzip$(Configuration)\Tmp\ + false + false + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + + + + Disabled + ..\..\..;..\..\minizip;%(AdditionalIncludeDirectories) + WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;_DEBUG;_CONSOLE;%(PreprocessorDefinitions) + true + Default + MultiThreadedDebugDLL + false + + + $(IntDir) + Level3 + ProgramDatabase + + + x86\ZlibDllDebug\zlibwapi.lib;%(AdditionalDependencies) + $(OutDir)miniunz.exe + true + $(OutDir)miniunz.pdb + Console + false + + + MachineX86 + + + + + MaxSpeed + OnlyExplicitInline + true + ..\..\..;..\..\minizip;%(AdditionalIncludeDirectories) + WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;NDEBUG;_CONSOLE;%(PreprocessorDefinitions) + true + Default + MultiThreaded + false + true + + + $(IntDir) + Level3 + ProgramDatabase + + + x86\ZlibDllRelease\zlibwapi.lib;%(AdditionalDependencies) + $(OutDir)miniunz.exe + true + Console + true + true + false + + + MachineX86 + + + + + X64 + + + Disabled + ..\..\..;..\..\minizip;%(AdditionalIncludeDirectories) + _CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;_DEBUG;_CONSOLE;WIN64;%(PreprocessorDefinitions) + true + Default + MultiThreadedDebugDLL + false + + + $(IntDir) + Level3 + ProgramDatabase + + + x64\ZlibDllDebug\zlibwapi.lib;%(AdditionalDependencies) + $(OutDir)miniunz.exe + true + $(OutDir)miniunz.pdb + Console + MachineX64 + + + + + Itanium + + + Disabled + ..\..\..;..\..\minizip;%(AdditionalIncludeDirectories) + _CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;_DEBUG;_CONSOLE;WIN64;%(PreprocessorDefinitions) + true + Default + MultiThreadedDebugDLL + false + + + $(IntDir) + Level3 + ProgramDatabase + + + ia64\ZlibDllDebug\zlibwapi.lib;%(AdditionalDependencies) + $(OutDir)miniunz.exe + true + $(OutDir)miniunz.pdb + Console + MachineIA64 + + + + + X64 + + + MaxSpeed + OnlyExplicitInline + true + ..\..\..;..\..\minizip;%(AdditionalIncludeDirectories) + _CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;NDEBUG;_CONSOLE;WIN64;%(PreprocessorDefinitions) + true + Default + MultiThreadedDLL + false + true + + + $(IntDir) + Level3 + ProgramDatabase + + + x64\ZlibDllRelease\zlibwapi.lib;%(AdditionalDependencies) + $(OutDir)miniunz.exe + true + Console + true + true + MachineX64 + + + + + Itanium + + + MaxSpeed + OnlyExplicitInline + true + ..\..\..;..\..\minizip;%(AdditionalIncludeDirectories) + _CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;NDEBUG;_CONSOLE;WIN64;%(PreprocessorDefinitions) + true + Default + MultiThreadedDLL + false + true + + + $(IntDir) + Level3 + ProgramDatabase + + + ia64\ZlibDllRelease\zlibwapi.lib;%(AdditionalDependencies) + $(OutDir)miniunz.exe + true + Console + true + true + MachineIA64 + + + + + + + + {8fd826f8-3739-44e6-8cc8-997122e53b8d} + + + + + + \ No newline at end of file diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/vstudio/vc11/minizip.vcxproj b/software/scsi2sd-util/zlib-1.2.8/contrib/vstudio/vc11/minizip.vcxproj new file mode 100644 index 0000000..d6e98f4 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/vstudio/vc11/minizip.vcxproj @@ -0,0 +1,311 @@ + + + + + Debug + Itanium + + + Debug + Win32 + + + Debug + x64 + + + Release + Itanium + + + Release + Win32 + + + Release + x64 + + + + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B} + Win32Proj + + + + Application + MultiByte + v110 + + + Application + Unicode + v110 + + + Application + MultiByte + + + Application + MultiByte + + + Application + MultiByte + v110 + + + Application + MultiByte + v110 + + + + + + + + + + + + + + + + + + + + + + + + + <_ProjectFileVersion>10.0.30128.1 + x86\MiniZip$(Configuration)\ + x86\MiniZip$(Configuration)\Tmp\ + true + false + x86\MiniZip$(Configuration)\ + x86\MiniZip$(Configuration)\Tmp\ + false + x64\$(Configuration)\ + x64\$(Configuration)\ + true + false + ia64\$(Configuration)\ + ia64\$(Configuration)\ + true + false + x64\$(Configuration)\ + x64\$(Configuration)\ + false + ia64\$(Configuration)\ + ia64\$(Configuration)\ + false + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + + + + Disabled + ..\..\..;..\..\minizip;%(AdditionalIncludeDirectories) + WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;_DEBUG;_CONSOLE;%(PreprocessorDefinitions) + true + Default + MultiThreadedDebugDLL + false + + + $(IntDir) + Level3 + ProgramDatabase + + + x86\ZlibDllDebug\zlibwapi.lib;%(AdditionalDependencies) + $(OutDir)minizip.exe + true + $(OutDir)minizip.pdb + Console + false + + + MachineX86 + + + + + MaxSpeed + OnlyExplicitInline + true + ..\..\..;..\..\minizip;%(AdditionalIncludeDirectories) + WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;NDEBUG;_CONSOLE;%(PreprocessorDefinitions) + true + Default + MultiThreaded + false + true + + + $(IntDir) + Level3 + ProgramDatabase + + + x86\ZlibDllRelease\zlibwapi.lib;%(AdditionalDependencies) + $(OutDir)minizip.exe + true + Console + true + true + false + + + MachineX86 + + + + + X64 + + + Disabled + ..\..\..;..\..\minizip;%(AdditionalIncludeDirectories) + _CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;_DEBUG;_CONSOLE;WIN64;%(PreprocessorDefinitions) + true + Default + MultiThreadedDebugDLL + false + + + $(IntDir) + Level3 + ProgramDatabase + + + x64\ZlibDllDebug\zlibwapi.lib;%(AdditionalDependencies) + $(OutDir)minizip.exe + true + $(OutDir)minizip.pdb + Console + MachineX64 + + + + + Itanium + + + Disabled + ..\..\..;..\..\minizip;%(AdditionalIncludeDirectories) + _CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;_DEBUG;_CONSOLE;WIN64;%(PreprocessorDefinitions) + true + Default + MultiThreadedDebugDLL + false + + + $(IntDir) + Level3 + ProgramDatabase + + + ia64\ZlibDllDebug\zlibwapi.lib;%(AdditionalDependencies) + $(OutDir)minizip.exe + true + $(OutDir)minizip.pdb + Console + MachineIA64 + + + + + X64 + + + MaxSpeed + OnlyExplicitInline + true + ..\..\..;..\..\minizip;%(AdditionalIncludeDirectories) + _CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;NDEBUG;_CONSOLE;WIN64;%(PreprocessorDefinitions) + true + Default + MultiThreadedDLL + false + true + + + $(IntDir) + Level3 + ProgramDatabase + + + x64\ZlibDllRelease\zlibwapi.lib;%(AdditionalDependencies) + $(OutDir)minizip.exe + true + Console + true + true + MachineX64 + + + + + Itanium + + + MaxSpeed + OnlyExplicitInline + true + ..\..\..;..\..\minizip;%(AdditionalIncludeDirectories) + _CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;NDEBUG;_CONSOLE;WIN64;%(PreprocessorDefinitions) + true + Default + MultiThreadedDLL + false + true + + + $(IntDir) + Level3 + ProgramDatabase + + + ia64\ZlibDllRelease\zlibwapi.lib;%(AdditionalDependencies) + $(OutDir)minizip.exe + true + Console + true + true + MachineIA64 + + + + + + + + {8fd826f8-3739-44e6-8cc8-997122e53b8d} + + + + + + \ No newline at end of file diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/vstudio/vc11/testzlib.vcxproj b/software/scsi2sd-util/zlib-1.2.8/contrib/vstudio/vc11/testzlib.vcxproj new file mode 100644 index 0000000..0115dd1 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/vstudio/vc11/testzlib.vcxproj @@ -0,0 +1,426 @@ + + + + + Debug + Itanium + + + Debug + Win32 + + + Debug + x64 + + + ReleaseWithoutAsm + Itanium + + + ReleaseWithoutAsm + Win32 + + + ReleaseWithoutAsm + x64 + + + Release + Itanium + + + Release + Win32 + + + Release + x64 + + + + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B} + testzlib + Win32Proj + + + + Application + MultiByte + true + v110 + + + Application + MultiByte + true + v110 + + + Application + Unicode + v110 + + + Application + MultiByte + true + + + Application + MultiByte + true + + + Application + MultiByte + + + Application + true + v110 + + + Application + true + v110 + + + Application + v110 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + <_ProjectFileVersion>10.0.30128.1 + x86\TestZlib$(Configuration)\ + x86\TestZlib$(Configuration)\Tmp\ + true + false + x86\TestZlib$(Configuration)\ + x86\TestZlib$(Configuration)\Tmp\ + false + false + x86\TestZlib$(Configuration)\ + x86\TestZlib$(Configuration)\Tmp\ + false + false + x64\TestZlib$(Configuration)\ + x64\TestZlib$(Configuration)\Tmp\ + false + ia64\TestZlib$(Configuration)\ + ia64\TestZlib$(Configuration)\Tmp\ + true + false + x64\TestZlib$(Configuration)\ + x64\TestZlib$(Configuration)\Tmp\ + false + ia64\TestZlib$(Configuration)\ + ia64\TestZlib$(Configuration)\Tmp\ + false + false + x64\TestZlib$(Configuration)\ + x64\TestZlib$(Configuration)\Tmp\ + false + ia64\TestZlib$(Configuration)\ + ia64\TestZlib$(Configuration)\Tmp\ + false + false + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + + + + Disabled + ..\..\..;%(AdditionalIncludeDirectories) + ASMV;ASMINF;WIN32;ZLIB_WINAPI;_DEBUG;_CONSOLE;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;%(PreprocessorDefinitions) + true + Default + MultiThreadedDebugDLL + false + + + AssemblyAndSourceCode + $(IntDir) + Level3 + ProgramDatabase + + + ..\..\masmx86\match686.obj;..\..\masmx86\inffas32.obj;%(AdditionalDependencies) + $(OutDir)testzlib.exe + true + $(OutDir)testzlib.pdb + Console + false + + + MachineX86 + + + + + MaxSpeed + OnlyExplicitInline + true + ..\..\..;%(AdditionalIncludeDirectories) + WIN32;ZLIB_WINAPI;NDEBUG;_CONSOLE;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;%(PreprocessorDefinitions) + true + Default + MultiThreaded + false + true + + + $(IntDir) + Level3 + ProgramDatabase + + + $(OutDir)testzlib.exe + true + Console + true + true + false + + + MachineX86 + + + + + MaxSpeed + OnlyExplicitInline + true + ..\..\..;%(AdditionalIncludeDirectories) + ASMV;ASMINF;WIN32;ZLIB_WINAPI;NDEBUG;_CONSOLE;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;%(PreprocessorDefinitions) + true + Default + MultiThreaded + false + true + + + $(IntDir) + Level3 + ProgramDatabase + + + ..\..\masmx86\match686.obj;..\..\masmx86\inffas32.obj;%(AdditionalDependencies) + $(OutDir)testzlib.exe + true + Console + true + true + false + + + MachineX86 + + + + + ..\..\..;%(AdditionalIncludeDirectories) + ASMV;ASMINF;WIN32;ZLIB_WINAPI;_DEBUG;_CONSOLE;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;%(PreprocessorDefinitions) + Default + MultiThreadedDebugDLL + false + $(IntDir) + + + ..\..\masmx64\gvmat64.obj;..\..\masmx64\inffasx64.obj;%(AdditionalDependencies) + + + + + Itanium + + + Disabled + ..\..\..;%(AdditionalIncludeDirectories) + ZLIB_WINAPI;_DEBUG;_CONSOLE;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;WIN64;%(PreprocessorDefinitions) + true + Default + MultiThreadedDebugDLL + false + + + AssemblyAndSourceCode + $(IntDir) + Level3 + ProgramDatabase + + + $(OutDir)testzlib.exe + true + $(OutDir)testzlib.pdb + Console + MachineIA64 + + + + + ..\..\..;%(AdditionalIncludeDirectories) + WIN32;ZLIB_WINAPI;NDEBUG;_CONSOLE;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;%(PreprocessorDefinitions) + Default + MultiThreadedDLL + false + $(IntDir) + + + %(AdditionalDependencies) + + + + + Itanium + + + MaxSpeed + OnlyExplicitInline + true + ..\..\..;%(AdditionalIncludeDirectories) + ZLIB_WINAPI;NDEBUG;_CONSOLE;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;WIN64;%(PreprocessorDefinitions) + true + Default + MultiThreadedDLL + false + true + + + $(IntDir) + Level3 + ProgramDatabase + + + $(OutDir)testzlib.exe + true + Console + true + true + MachineIA64 + + + + + ..\..\..;%(AdditionalIncludeDirectories) + ASMV;ASMINF;WIN32;ZLIB_WINAPI;NDEBUG;_CONSOLE;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;%(PreprocessorDefinitions) + Default + MultiThreadedDLL + false + $(IntDir) + + + ..\..\masmx64\gvmat64.obj;..\..\masmx64\inffasx64.obj;%(AdditionalDependencies) + + + + + Itanium + + + MaxSpeed + OnlyExplicitInline + true + ..\..\..;%(AdditionalIncludeDirectories) + ZLIB_WINAPI;NDEBUG;_CONSOLE;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;WIN64;%(PreprocessorDefinitions) + true + Default + MultiThreadedDLL + false + true + + + $(IntDir) + Level3 + ProgramDatabase + + + $(OutDir)testzlib.exe + true + Console + true + true + MachineIA64 + + + + + + + + + + true + true + true + true + true + true + + + + + + + + + + + + + \ No newline at end of file diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/vstudio/vc11/testzlibdll.vcxproj b/software/scsi2sd-util/zlib-1.2.8/contrib/vstudio/vc11/testzlibdll.vcxproj new file mode 100644 index 0000000..9d36336 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/vstudio/vc11/testzlibdll.vcxproj @@ -0,0 +1,314 @@ + + + + + Debug + Itanium + + + Debug + Win32 + + + Debug + x64 + + + Release + Itanium + + + Release + Win32 + + + Release + x64 + + + + {C52F9E7B-498A-42BE-8DB4-85A15694366A} + Win32Proj + + + + Application + MultiByte + v110 + + + Application + Unicode + v110 + + + Application + MultiByte + + + Application + MultiByte + + + Application + MultiByte + v110 + + + Application + MultiByte + v110 + + + + + + + + + + + + + + + + + + + + + + + + + <_ProjectFileVersion>10.0.30128.1 + x86\TestZlibDll$(Configuration)\ + x86\TestZlibDll$(Configuration)\Tmp\ + true + false + x86\TestZlibDll$(Configuration)\ + x86\TestZlibDll$(Configuration)\Tmp\ + false + false + x64\TestZlibDll$(Configuration)\ + x64\TestZlibDll$(Configuration)\Tmp\ + true + false + ia64\TestZlibDll$(Configuration)\ + ia64\TestZlibDll$(Configuration)\Tmp\ + true + false + x64\TestZlibDll$(Configuration)\ + x64\TestZlibDll$(Configuration)\Tmp\ + false + false + ia64\TestZlibDll$(Configuration)\ + ia64\TestZlibDll$(Configuration)\Tmp\ + false + false + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + + + + Disabled + ..\..\..;..\..\minizip;%(AdditionalIncludeDirectories) + WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;_DEBUG;_CONSOLE;%(PreprocessorDefinitions) + true + Default + MultiThreadedDebugDLL + false + + + $(IntDir) + Level3 + ProgramDatabase + + + x86\ZlibDllDebug\zlibwapi.lib;%(AdditionalDependencies) + $(OutDir)testzlibdll.exe + true + $(OutDir)testzlib.pdb + Console + false + + + MachineX86 + + + + + MaxSpeed + OnlyExplicitInline + true + ..\..\..;..\..\minizip;%(AdditionalIncludeDirectories) + WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;NDEBUG;_CONSOLE;%(PreprocessorDefinitions) + true + Default + MultiThreaded + false + true + + + $(IntDir) + Level3 + ProgramDatabase + + + x86\ZlibDllRelease\zlibwapi.lib;%(AdditionalDependencies) + $(OutDir)testzlibdll.exe + true + Console + true + true + false + + + MachineX86 + + + + + X64 + + + Disabled + ..\..\..;..\..\minizip;%(AdditionalIncludeDirectories) + _CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;_DEBUG;_CONSOLE;WIN64;%(PreprocessorDefinitions) + true + Default + MultiThreadedDebugDLL + false + + + $(IntDir) + Level3 + ProgramDatabase + + + x64\ZlibDllDebug\zlibwapi.lib;%(AdditionalDependencies) + $(OutDir)testzlibdll.exe + true + $(OutDir)testzlib.pdb + Console + MachineX64 + + + + + Itanium + + + Disabled + ..\..\..;..\..\minizip;%(AdditionalIncludeDirectories) + _CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;_DEBUG;_CONSOLE;WIN64;%(PreprocessorDefinitions) + true + Default + MultiThreadedDebugDLL + false + + + $(IntDir) + Level3 + ProgramDatabase + + + ia64\ZlibDllDebug\zlibwapi.lib;%(AdditionalDependencies) + $(OutDir)testzlibdll.exe + true + $(OutDir)testzlib.pdb + Console + MachineIA64 + + + + + X64 + + + MaxSpeed + OnlyExplicitInline + true + ..\..\..;..\..\minizip;%(AdditionalIncludeDirectories) + _CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;NDEBUG;_CONSOLE;WIN64;%(PreprocessorDefinitions) + true + Default + MultiThreadedDLL + false + true + + + $(IntDir) + Level3 + ProgramDatabase + + + x64\ZlibDllRelease\zlibwapi.lib;%(AdditionalDependencies) + $(OutDir)testzlibdll.exe + true + Console + true + true + MachineX64 + + + + + Itanium + + + MaxSpeed + OnlyExplicitInline + true + ..\..\..;..\..\minizip;%(AdditionalIncludeDirectories) + _CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;NDEBUG;_CONSOLE;WIN64;%(PreprocessorDefinitions) + true + Default + MultiThreadedDLL + false + true + + + $(IntDir) + Level3 + ProgramDatabase + + + ia64\ZlibDllRelease\zlibwapi.lib;%(AdditionalDependencies) + $(OutDir)testzlibdll.exe + true + Console + true + true + MachineIA64 + + + + + + + + {8fd826f8-3739-44e6-8cc8-997122e53b8d} + + + + + + \ No newline at end of file diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/vstudio/vc11/zlib.rc b/software/scsi2sd-util/zlib-1.2.8/contrib/vstudio/vc11/zlib.rc new file mode 100644 index 0000000..d42f191 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/vstudio/vc11/zlib.rc @@ -0,0 +1,32 @@ +#include + +#define IDR_VERSION1 1 +IDR_VERSION1 VERSIONINFO MOVEABLE IMPURE LOADONCALL DISCARDABLE + FILEVERSION 1,2,8,0 + PRODUCTVERSION 1,2,8,0 + FILEFLAGSMASK VS_FFI_FILEFLAGSMASK + FILEFLAGS 0 + FILEOS VOS_DOS_WINDOWS32 + FILETYPE VFT_DLL + FILESUBTYPE 0 // not used +BEGIN + BLOCK "StringFileInfo" + BEGIN + BLOCK "040904E4" + //language ID = U.S. English, char set = Windows, Multilingual + + BEGIN + VALUE "FileDescription", "zlib data compression and ZIP file I/O library\0" + VALUE "FileVersion", "1.2.8\0" + VALUE "InternalName", "zlib\0" + VALUE "OriginalFilename", "zlibwapi.dll\0" + VALUE "ProductName", "ZLib.DLL\0" + VALUE "Comments","DLL support by Alessandro Iacopetti & Gilles Vollant\0" + VALUE "LegalCopyright", "(C) 1995-2013 Jean-loup Gailly & Mark Adler\0" + END + END + BLOCK "VarFileInfo" + BEGIN + VALUE "Translation", 0x0409, 1252 + END +END diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/vstudio/vc11/zlibstat.vcxproj b/software/scsi2sd-util/zlib-1.2.8/contrib/vstudio/vc11/zlibstat.vcxproj new file mode 100644 index 0000000..64b4d86 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/vstudio/vc11/zlibstat.vcxproj @@ -0,0 +1,464 @@ + + + + + Debug + Itanium + + + Debug + Win32 + + + Debug + x64 + + + ReleaseWithoutAsm + Itanium + + + ReleaseWithoutAsm + Win32 + + + ReleaseWithoutAsm + x64 + + + Release + Itanium + + + Release + Win32 + + + Release + x64 + + + + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8} + + + + StaticLibrary + false + v110 + + + StaticLibrary + false + v110 + + + StaticLibrary + false + v110 + Unicode + + + StaticLibrary + false + + + StaticLibrary + false + + + StaticLibrary + false + + + StaticLibrary + false + v110 + + + StaticLibrary + false + v110 + + + StaticLibrary + false + v110 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + <_ProjectFileVersion>10.0.30128.1 + x86\ZlibStat$(Configuration)\ + x86\ZlibStat$(Configuration)\Tmp\ + x86\ZlibStat$(Configuration)\ + x86\ZlibStat$(Configuration)\Tmp\ + x86\ZlibStat$(Configuration)\ + x86\ZlibStat$(Configuration)\Tmp\ + x64\ZlibStat$(Configuration)\ + x64\ZlibStat$(Configuration)\Tmp\ + ia64\ZlibStat$(Configuration)\ + ia64\ZlibStat$(Configuration)\Tmp\ + x64\ZlibStat$(Configuration)\ + x64\ZlibStat$(Configuration)\Tmp\ + ia64\ZlibStat$(Configuration)\ + ia64\ZlibStat$(Configuration)\Tmp\ + x64\ZlibStat$(Configuration)\ + x64\ZlibStat$(Configuration)\Tmp\ + ia64\ZlibStat$(Configuration)\ + ia64\ZlibStat$(Configuration)\Tmp\ + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + + + + Disabled + ..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories) + WIN32;ZLIB_WINAPI;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;%(PreprocessorDefinitions) + + + MultiThreadedDebugDLL + false + $(IntDir)zlibstat.pch + $(IntDir) + $(IntDir) + $(OutDir) + Level3 + true + OldStyle + + + 0x040c + + + /MACHINE:X86 /NODEFAULTLIB %(AdditionalOptions) + $(OutDir)zlibstat.lib + true + + + + + OnlyExplicitInline + ..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories) + WIN32;ZLIB_WINAPI;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;ASMV;ASMINF;%(PreprocessorDefinitions) + true + + + MultiThreaded + false + true + $(IntDir)zlibstat.pch + $(IntDir) + $(IntDir) + $(OutDir) + Level3 + true + + + 0x040c + + + /MACHINE:X86 /NODEFAULTLIB %(AdditionalOptions) + ..\..\masmx86\match686.obj;..\..\masmx86\inffas32.obj;%(AdditionalDependencies) + $(OutDir)zlibstat.lib + true + + + + + OnlyExplicitInline + ..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories) + WIN32;ZLIB_WINAPI;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;%(PreprocessorDefinitions) + true + + + MultiThreaded + false + true + $(IntDir)zlibstat.pch + $(IntDir) + $(IntDir) + $(OutDir) + Level3 + true + + + 0x040c + + + /MACHINE:X86 /NODEFAULTLIB %(AdditionalOptions) + $(OutDir)zlibstat.lib + true + + + + + X64 + + + Disabled + ..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories) + ZLIB_WINAPI;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;WIN64;%(PreprocessorDefinitions) + + + MultiThreadedDebugDLL + false + $(IntDir)zlibstat.pch + $(IntDir) + $(IntDir) + $(OutDir) + Level3 + true + OldStyle + + + 0x040c + + + /MACHINE:AMD64 /NODEFAULTLIB %(AdditionalOptions) + $(OutDir)zlibstat.lib + true + + + + + Itanium + + + Disabled + ..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories) + ZLIB_WINAPI;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;WIN64;%(PreprocessorDefinitions) + + + MultiThreadedDebugDLL + false + $(IntDir)zlibstat.pch + $(IntDir) + $(IntDir) + $(OutDir) + Level3 + true + OldStyle + + + 0x040c + + + /MACHINE:IA64 /NODEFAULTLIB %(AdditionalOptions) + $(OutDir)zlibstat.lib + true + + + + + X64 + + + OnlyExplicitInline + ..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories) + ZLIB_WINAPI;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;ASMV;ASMINF;WIN64;%(PreprocessorDefinitions) + true + + + MultiThreadedDLL + false + true + $(IntDir)zlibstat.pch + $(IntDir) + $(IntDir) + $(OutDir) + Level3 + true + + + 0x040c + + + /MACHINE:AMD64 /NODEFAULTLIB %(AdditionalOptions) + ..\..\masmx64\gvmat64.obj;..\..\masmx64\inffasx64.obj;%(AdditionalDependencies) + $(OutDir)zlibstat.lib + true + + + + + Itanium + + + OnlyExplicitInline + ..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories) + ZLIB_WINAPI;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;WIN64;%(PreprocessorDefinitions) + true + + + MultiThreadedDLL + false + true + $(IntDir)zlibstat.pch + $(IntDir) + $(IntDir) + $(OutDir) + Level3 + true + + + 0x040c + + + /MACHINE:IA64 /NODEFAULTLIB %(AdditionalOptions) + $(OutDir)zlibstat.lib + true + + + + + X64 + + + OnlyExplicitInline + ..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories) + ZLIB_WINAPI;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;WIN64;%(PreprocessorDefinitions) + true + + + MultiThreadedDLL + false + true + $(IntDir)zlibstat.pch + $(IntDir) + $(IntDir) + $(OutDir) + Level3 + true + + + 0x040c + + + /MACHINE:AMD64 /NODEFAULTLIB %(AdditionalOptions) + $(OutDir)zlibstat.lib + true + + + + + Itanium + + + OnlyExplicitInline + ..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories) + ZLIB_WINAPI;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;WIN64;%(PreprocessorDefinitions) + true + + + MultiThreadedDLL + false + true + $(IntDir)zlibstat.pch + $(IntDir) + $(IntDir) + $(OutDir) + Level3 + true + + + 0x040c + + + /MACHINE:IA64 /NODEFAULTLIB %(AdditionalOptions) + $(OutDir)zlibstat.lib + true + + + + + + + + + + + + + + true + true + true + true + true + true + + + + + + + + + + + + + + + + + + + + + \ No newline at end of file diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/vstudio/vc11/zlibvc.def b/software/scsi2sd-util/zlib-1.2.8/contrib/vstudio/vc11/zlibvc.def new file mode 100644 index 0000000..980fed3 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/vstudio/vc11/zlibvc.def @@ -0,0 +1,143 @@ +LIBRARY +; zlib data compression and ZIP file I/O library + +VERSION 1.2.8 + +EXPORTS + adler32 @1 + compress @2 + crc32 @3 + deflate @4 + deflateCopy @5 + deflateEnd @6 + deflateInit2_ @7 + deflateInit_ @8 + deflateParams @9 + deflateReset @10 + deflateSetDictionary @11 + gzclose @12 + gzdopen @13 + gzerror @14 + gzflush @15 + gzopen @16 + gzread @17 + gzwrite @18 + inflate @19 + inflateEnd @20 + inflateInit2_ @21 + inflateInit_ @22 + inflateReset @23 + inflateSetDictionary @24 + inflateSync @25 + uncompress @26 + zlibVersion @27 + gzprintf @28 + gzputc @29 + gzgetc @30 + gzseek @31 + gzrewind @32 + gztell @33 + gzeof @34 + gzsetparams @35 + zError @36 + inflateSyncPoint @37 + get_crc_table @38 + compress2 @39 + gzputs @40 + gzgets @41 + inflateCopy @42 + inflateBackInit_ @43 + inflateBack @44 + inflateBackEnd @45 + compressBound @46 + deflateBound @47 + gzclearerr @48 + gzungetc @49 + zlibCompileFlags @50 + deflatePrime @51 + deflatePending @52 + + unzOpen @61 + unzClose @62 + unzGetGlobalInfo @63 + unzGetCurrentFileInfo @64 + unzGoToFirstFile @65 + unzGoToNextFile @66 + unzOpenCurrentFile @67 + unzReadCurrentFile @68 + unzOpenCurrentFile3 @69 + unztell @70 + unzeof @71 + unzCloseCurrentFile @72 + unzGetGlobalComment @73 + unzStringFileNameCompare @74 + unzLocateFile @75 + unzGetLocalExtrafield @76 + unzOpen2 @77 + unzOpenCurrentFile2 @78 + unzOpenCurrentFilePassword @79 + + zipOpen @80 + zipOpenNewFileInZip @81 + zipWriteInFileInZip @82 + zipCloseFileInZip @83 + zipClose @84 + zipOpenNewFileInZip2 @86 + zipCloseFileInZipRaw @87 + zipOpen2 @88 + zipOpenNewFileInZip3 @89 + + unzGetFilePos @100 + unzGoToFilePos @101 + + fill_win32_filefunc @110 + +; zlibwapi v1.2.4 added: + fill_win32_filefunc64 @111 + fill_win32_filefunc64A @112 + fill_win32_filefunc64W @113 + + unzOpen64 @120 + unzOpen2_64 @121 + unzGetGlobalInfo64 @122 + unzGetCurrentFileInfo64 @124 + unzGetCurrentFileZStreamPos64 @125 + unztell64 @126 + unzGetFilePos64 @127 + unzGoToFilePos64 @128 + + zipOpen64 @130 + zipOpen2_64 @131 + zipOpenNewFileInZip64 @132 + zipOpenNewFileInZip2_64 @133 + zipOpenNewFileInZip3_64 @134 + zipOpenNewFileInZip4_64 @135 + zipCloseFileInZipRaw64 @136 + +; zlib1 v1.2.4 added: + adler32_combine @140 + crc32_combine @142 + deflateSetHeader @144 + deflateTune @145 + gzbuffer @146 + gzclose_r @147 + gzclose_w @148 + gzdirect @149 + gzoffset @150 + inflateGetHeader @156 + inflateMark @157 + inflatePrime @158 + inflateReset2 @159 + inflateUndermine @160 + +; zlib1 v1.2.6 added: + gzgetc_ @161 + inflateResetKeep @163 + deflateResetKeep @164 + +; zlib1 v1.2.7 added: + gzopen_w @165 + +; zlib1 v1.2.8 added: + inflateGetDictionary @166 + gzvprintf @167 diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/vstudio/vc11/zlibvc.sln b/software/scsi2sd-util/zlib-1.2.8/contrib/vstudio/vc11/zlibvc.sln new file mode 100644 index 0000000..b7e3812 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/vstudio/vc11/zlibvc.sln @@ -0,0 +1,117 @@ + +Microsoft Visual Studio Solution File, Format Version 12.00 +# Visual Studio 2012 +Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "zlibvc", "zlibvc.vcxproj", "{8FD826F8-3739-44E6-8CC8-997122E53B8D}" +EndProject +Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "zlibstat", "zlibstat.vcxproj", "{745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}" +EndProject +Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "testzlib", "testzlib.vcxproj", "{AA6666AA-E09F-4135-9C0C-4FE50C3C654B}" +EndProject +Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "testzlibdll", "testzlibdll.vcxproj", "{C52F9E7B-498A-42BE-8DB4-85A15694366A}" +EndProject +Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "minizip", "minizip.vcxproj", "{48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}" +EndProject +Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "miniunz", "miniunz.vcxproj", "{C52F9E7B-498A-42BE-8DB4-85A15694382A}" +EndProject +Global + GlobalSection(SolutionConfigurationPlatforms) = preSolution + Debug|Itanium = Debug|Itanium + Debug|Win32 = Debug|Win32 + Debug|x64 = Debug|x64 + Release|Itanium = Release|Itanium + Release|Win32 = Release|Win32 + Release|x64 = Release|x64 + ReleaseWithoutAsm|Itanium = ReleaseWithoutAsm|Itanium + ReleaseWithoutAsm|Win32 = ReleaseWithoutAsm|Win32 + ReleaseWithoutAsm|x64 = ReleaseWithoutAsm|x64 + EndGlobalSection + GlobalSection(ProjectConfigurationPlatforms) = postSolution + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Debug|Itanium.ActiveCfg = Debug|Win32 + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Debug|Win32.ActiveCfg = Debug|Win32 + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Debug|Win32.Build.0 = Debug|Win32 + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Debug|x64.ActiveCfg = Debug|x64 + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Debug|x64.Build.0 = Debug|x64 + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Release|Itanium.ActiveCfg = Release|Win32 + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Release|Win32.ActiveCfg = Release|Win32 + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Release|Win32.Build.0 = Release|Win32 + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Release|x64.ActiveCfg = Release|x64 + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Release|x64.Build.0 = Release|x64 + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.ReleaseWithoutAsm|Itanium.ActiveCfg = ReleaseWithoutAsm|Win32 + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.ReleaseWithoutAsm|Win32.ActiveCfg = ReleaseWithoutAsm|Win32 + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.ReleaseWithoutAsm|Win32.Build.0 = ReleaseWithoutAsm|Win32 + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.ReleaseWithoutAsm|x64.ActiveCfg = ReleaseWithoutAsm|x64 + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.ReleaseWithoutAsm|x64.Build.0 = ReleaseWithoutAsm|x64 + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Debug|Itanium.ActiveCfg = Debug|Win32 + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Debug|Win32.ActiveCfg = Debug|Win32 + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Debug|Win32.Build.0 = Debug|Win32 + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Debug|x64.ActiveCfg = Debug|x64 + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Debug|x64.Build.0 = Debug|x64 + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Release|Itanium.ActiveCfg = Release|Win32 + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Release|Win32.ActiveCfg = Release|Win32 + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Release|Win32.Build.0 = Release|Win32 + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Release|x64.ActiveCfg = Release|x64 + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Release|x64.Build.0 = Release|x64 + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.ReleaseWithoutAsm|Itanium.ActiveCfg = ReleaseWithoutAsm|Win32 + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.ReleaseWithoutAsm|Win32.ActiveCfg = ReleaseWithoutAsm|Win32 + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.ReleaseWithoutAsm|Win32.Build.0 = ReleaseWithoutAsm|Win32 + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.ReleaseWithoutAsm|x64.ActiveCfg = ReleaseWithoutAsm|x64 + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.ReleaseWithoutAsm|x64.Build.0 = ReleaseWithoutAsm|x64 + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Debug|Itanium.ActiveCfg = Debug|Win32 + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Debug|Win32.ActiveCfg = Debug|Win32 + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Debug|Win32.Build.0 = Debug|Win32 + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Debug|x64.ActiveCfg = Debug|x64 + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Debug|x64.Build.0 = Debug|x64 + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Release|Itanium.ActiveCfg = Release|Win32 + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Release|Win32.ActiveCfg = Release|Win32 + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Release|Win32.Build.0 = Release|Win32 + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Release|x64.ActiveCfg = Release|x64 + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Release|x64.Build.0 = Release|x64 + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|Itanium.ActiveCfg = ReleaseWithoutAsm|Win32 + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|Win32.ActiveCfg = ReleaseWithoutAsm|Win32 + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|Win32.Build.0 = ReleaseWithoutAsm|Win32 + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|x64.ActiveCfg = ReleaseWithoutAsm|x64 + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|x64.Build.0 = ReleaseWithoutAsm|x64 + {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Debug|Itanium.ActiveCfg = Debug|Win32 + {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Debug|Win32.ActiveCfg = Debug|Win32 + {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Debug|Win32.Build.0 = Debug|Win32 + {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Debug|x64.ActiveCfg = Debug|x64 + {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Debug|x64.Build.0 = Debug|x64 + {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Release|Itanium.ActiveCfg = Release|Win32 + {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Release|Win32.ActiveCfg = Release|Win32 + {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Release|Win32.Build.0 = Release|Win32 + {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Release|x64.ActiveCfg = Release|x64 + {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Release|x64.Build.0 = Release|x64 + {C52F9E7B-498A-42BE-8DB4-85A15694366A}.ReleaseWithoutAsm|Itanium.ActiveCfg = Release|Win32 + {C52F9E7B-498A-42BE-8DB4-85A15694366A}.ReleaseWithoutAsm|Win32.ActiveCfg = Release|Win32 + {C52F9E7B-498A-42BE-8DB4-85A15694366A}.ReleaseWithoutAsm|x64.ActiveCfg = Release|x64 + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Debug|Itanium.ActiveCfg = Debug|Win32 + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Debug|Win32.ActiveCfg = Debug|Win32 + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Debug|Win32.Build.0 = Debug|Win32 + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Debug|x64.ActiveCfg = Debug|x64 + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Debug|x64.Build.0 = Debug|x64 + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Release|Itanium.ActiveCfg = Release|Win32 + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Release|Win32.ActiveCfg = Release|Win32 + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Release|Win32.Build.0 = Release|Win32 + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Release|x64.ActiveCfg = Release|x64 + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Release|x64.Build.0 = Release|x64 + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|Itanium.ActiveCfg = Release|Win32 + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|Win32.ActiveCfg = Release|Win32 + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|x64.ActiveCfg = Release|x64 + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Debug|Itanium.ActiveCfg = Debug|Win32 + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Debug|Win32.ActiveCfg = Debug|Win32 + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Debug|Win32.Build.0 = Debug|Win32 + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Debug|x64.ActiveCfg = Debug|x64 + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Debug|x64.Build.0 = Debug|x64 + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Release|Itanium.ActiveCfg = Release|Win32 + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Release|Win32.ActiveCfg = Release|Win32 + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Release|Win32.Build.0 = Release|Win32 + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Release|x64.ActiveCfg = Release|x64 + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Release|x64.Build.0 = Release|x64 + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.ReleaseWithoutAsm|Itanium.ActiveCfg = Release|Win32 + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.ReleaseWithoutAsm|Win32.ActiveCfg = Release|Win32 + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.ReleaseWithoutAsm|x64.ActiveCfg = Release|x64 + EndGlobalSection + GlobalSection(SolutionProperties) = preSolution + HideSolutionNode = FALSE + EndGlobalSection +EndGlobal diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/vstudio/vc11/zlibvc.vcxproj b/software/scsi2sd-util/zlib-1.2.8/contrib/vstudio/vc11/zlibvc.vcxproj new file mode 100644 index 0000000..c4cffcc --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/vstudio/vc11/zlibvc.vcxproj @@ -0,0 +1,688 @@ + + + + + Debug + Itanium + + + Debug + Win32 + + + Debug + x64 + + + ReleaseWithoutAsm + Itanium + + + ReleaseWithoutAsm + Win32 + + + ReleaseWithoutAsm + x64 + + + Release + Itanium + + + Release + Win32 + + + Release + x64 + + + + {8FD826F8-3739-44E6-8CC8-997122E53B8D} + + + + DynamicLibrary + false + true + v110 + + + DynamicLibrary + false + true + v110 + + + DynamicLibrary + false + v110 + Unicode + + + DynamicLibrary + false + true + + + DynamicLibrary + false + true + + + DynamicLibrary + false + + + DynamicLibrary + false + true + v110 + + + DynamicLibrary + false + true + v110 + + + DynamicLibrary + false + v110 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + <_ProjectFileVersion>10.0.30128.1 + x86\ZlibDll$(Configuration)\ + x86\ZlibDll$(Configuration)\Tmp\ + true + false + x86\ZlibDll$(Configuration)\ + x86\ZlibDll$(Configuration)\Tmp\ + false + false + x86\ZlibDll$(Configuration)\ + x86\ZlibDll$(Configuration)\Tmp\ + false + false + x64\ZlibDll$(Configuration)\ + x64\ZlibDll$(Configuration)\Tmp\ + true + false + ia64\ZlibDll$(Configuration)\ + ia64\ZlibDll$(Configuration)\Tmp\ + true + false + x64\ZlibDll$(Configuration)\ + x64\ZlibDll$(Configuration)\Tmp\ + false + false + ia64\ZlibDll$(Configuration)\ + ia64\ZlibDll$(Configuration)\Tmp\ + false + false + x64\ZlibDll$(Configuration)\ + x64\ZlibDll$(Configuration)\Tmp\ + false + false + ia64\ZlibDll$(Configuration)\ + ia64\ZlibDll$(Configuration)\Tmp\ + false + false + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + AllRules.ruleset + + + zlibwapi + zlibwapi + zlibwapi + zlibwapi + zlibwapi + zlibwapi + + + + _DEBUG;%(PreprocessorDefinitions) + true + true + Win32 + $(OutDir)zlibvc.tlb + + + Disabled + ..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories) + WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;ZLIB_WINAPI;ASMV;ASMINF;%(PreprocessorDefinitions) + + + MultiThreadedDebugDLL + false + $(IntDir)zlibvc.pch + $(IntDir) + $(IntDir) + $(OutDir) + + + Level3 + true + ProgramDatabase + + + _DEBUG;%(PreprocessorDefinitions) + 0x040c + + + /MACHINE:I386 %(AdditionalOptions) + ..\..\masmx86\match686.obj;..\..\masmx86\inffas32.obj;%(AdditionalDependencies) + $(OutDir)zlibwapi.dll + true + .\zlibvc.def + true + $(OutDir)zlibwapi.pdb + true + $(OutDir)zlibwapi.map + Windows + false + + + $(OutDir)zlibwapi.lib + + + cd ..\..\masmx86 +bld_ml32.bat + + + + + NDEBUG;%(PreprocessorDefinitions) + true + true + Win32 + $(OutDir)zlibvc.tlb + + + OnlyExplicitInline + ..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories) + WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;ZLIB_WINAPI;%(PreprocessorDefinitions) + true + + + MultiThreadedDLL + false + true + $(IntDir)zlibvc.pch + All + $(IntDir) + $(IntDir) + $(OutDir) + + + Level3 + true + + + NDEBUG;%(PreprocessorDefinitions) + 0x040c + + + /MACHINE:I386 %(AdditionalOptions) + $(OutDir)zlibwapi.dll + true + false + .\zlibvc.def + $(OutDir)zlibwapi.pdb + true + $(OutDir)zlibwapi.map + Windows + false + + + $(OutDir)zlibwapi.lib + + + + + NDEBUG;%(PreprocessorDefinitions) + true + true + Win32 + $(OutDir)zlibvc.tlb + + + OnlyExplicitInline + ..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories) + WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;ZLIB_WINAPI;ASMV;ASMINF;%(PreprocessorDefinitions) + true + + + MultiThreaded + false + true + $(IntDir)zlibvc.pch + All + $(IntDir) + $(IntDir) + $(OutDir) + + + Level3 + true + + + NDEBUG;%(PreprocessorDefinitions) + 0x040c + + + /MACHINE:I386 %(AdditionalOptions) + ..\..\masmx86\match686.obj;..\..\masmx86\inffas32.obj;%(AdditionalDependencies) + $(OutDir)zlibwapi.dll + true + false + .\zlibvc.def + $(OutDir)zlibwapi.pdb + true + $(OutDir)zlibwapi.map + Windows + false + + + $(OutDir)zlibwapi.lib + + + cd ..\..\masmx86 +bld_ml32.bat + + + + + _DEBUG;%(PreprocessorDefinitions) + true + true + X64 + $(OutDir)zlibvc.tlb + + + Disabled + ..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories) + WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;ZLIB_WINAPI;ASMV;ASMINF;WIN64;%(PreprocessorDefinitions) + + + MultiThreadedDebugDLL + false + $(IntDir)zlibvc.pch + $(IntDir) + $(IntDir) + $(OutDir) + + + Level3 + true + ProgramDatabase + + + _DEBUG;%(PreprocessorDefinitions) + 0x040c + + + ..\..\masmx64\gvmat64.obj;..\..\masmx64\inffasx64.obj;%(AdditionalDependencies) + $(OutDir)zlibwapi.dll + true + .\zlibvc.def + true + $(OutDir)zlibwapi.pdb + true + $(OutDir)zlibwapi.map + Windows + $(OutDir)zlibwapi.lib + MachineX64 + + + cd ..\..\contrib\masmx64 +bld_ml64.bat + + + + + _DEBUG;%(PreprocessorDefinitions) + true + true + Itanium + $(OutDir)zlibvc.tlb + + + Disabled + ..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories) + WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;ZLIB_WINAPI;WIN64;%(PreprocessorDefinitions) + + + MultiThreadedDebugDLL + false + $(IntDir)zlibvc.pch + $(IntDir) + $(IntDir) + $(OutDir) + + + Level3 + true + ProgramDatabase + + + _DEBUG;%(PreprocessorDefinitions) + 0x040c + + + $(OutDir)zlibwapi.dll + true + .\zlibvc.def + true + $(OutDir)zlibwapi.pdb + true + $(OutDir)zlibwapi.map + Windows + $(OutDir)zlibwapi.lib + MachineIA64 + + + + + NDEBUG;%(PreprocessorDefinitions) + true + true + X64 + $(OutDir)zlibvc.tlb + + + OnlyExplicitInline + ..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories) + WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;ZLIB_WINAPI;WIN64;%(PreprocessorDefinitions) + true + + + MultiThreadedDLL + false + true + $(IntDir)zlibvc.pch + All + $(IntDir) + $(IntDir) + $(OutDir) + + + Level3 + true + + + NDEBUG;%(PreprocessorDefinitions) + 0x040c + + + $(OutDir)zlibwapi.dll + true + false + .\zlibvc.def + $(OutDir)zlibwapi.pdb + true + $(OutDir)zlibwapi.map + Windows + $(OutDir)zlibwapi.lib + MachineX64 + + + + + NDEBUG;%(PreprocessorDefinitions) + true + true + Itanium + $(OutDir)zlibvc.tlb + + + OnlyExplicitInline + ..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories) + WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;ZLIB_WINAPI;WIN64;%(PreprocessorDefinitions) + true + + + MultiThreadedDLL + false + true + $(IntDir)zlibvc.pch + All + $(IntDir) + $(IntDir) + $(OutDir) + + + Level3 + true + + + NDEBUG;%(PreprocessorDefinitions) + 0x040c + + + $(OutDir)zlibwapi.dll + true + false + .\zlibvc.def + $(OutDir)zlibwapi.pdb + true + $(OutDir)zlibwapi.map + Windows + $(OutDir)zlibwapi.lib + MachineIA64 + + + + + NDEBUG;%(PreprocessorDefinitions) + true + true + X64 + $(OutDir)zlibvc.tlb + + + OnlyExplicitInline + ..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories) + _CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;ZLIB_WINAPI;ASMV;ASMINF;WIN64;%(PreprocessorDefinitions) + true + + + MultiThreadedDLL + false + true + $(IntDir)zlibvc.pch + All + $(IntDir) + $(IntDir) + $(OutDir) + + + Level3 + true + + + NDEBUG;%(PreprocessorDefinitions) + 0x040c + + + ..\..\masmx64\gvmat64.obj;..\..\masmx64\inffasx64.obj;%(AdditionalDependencies) + $(OutDir)zlibwapi.dll + true + false + .\zlibvc.def + $(OutDir)zlibwapi.pdb + true + $(OutDir)zlibwapi.map + Windows + $(OutDir)zlibwapi.lib + MachineX64 + + + cd ..\..\masmx64 +bld_ml64.bat + + + + + NDEBUG;%(PreprocessorDefinitions) + true + true + Itanium + $(OutDir)zlibvc.tlb + + + OnlyExplicitInline + ..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories) + _CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;ZLIB_WINAPI;WIN64;%(PreprocessorDefinitions) + true + + + MultiThreadedDLL + false + true + $(IntDir)zlibvc.pch + All + $(IntDir) + $(IntDir) + $(OutDir) + + + Level3 + true + + + NDEBUG;%(PreprocessorDefinitions) + 0x040c + + + $(OutDir)zlibwapi.dll + true + false + .\zlibvc.def + $(OutDir)zlibwapi.pdb + true + $(OutDir)zlibwapi.map + Windows + $(OutDir)zlibwapi.lib + MachineIA64 + + + + + + + + + + + + + + true + true + true + true + true + true + + + + + + + + + + %(AdditionalIncludeDirectories) + ZLIB_INTERNAL;%(PreprocessorDefinitions) + %(AdditionalIncludeDirectories) + ZLIB_INTERNAL;%(PreprocessorDefinitions) + %(AdditionalIncludeDirectories) + ZLIB_INTERNAL;%(PreprocessorDefinitions) + + + %(AdditionalIncludeDirectories) + ZLIB_INTERNAL;%(PreprocessorDefinitions) + %(AdditionalIncludeDirectories) + ZLIB_INTERNAL;%(PreprocessorDefinitions) + %(AdditionalIncludeDirectories) + ZLIB_INTERNAL;%(PreprocessorDefinitions) + + + + + + + + + + + + + + + + + + + + + + + + \ No newline at end of file diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/vstudio/vc9/miniunz.vcproj b/software/scsi2sd-util/zlib-1.2.8/contrib/vstudio/vc9/miniunz.vcproj new file mode 100644 index 0000000..038a9e5 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/vstudio/vc9/miniunz.vcproj @@ -0,0 +1,565 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/vstudio/vc9/minizip.vcproj b/software/scsi2sd-util/zlib-1.2.8/contrib/vstudio/vc9/minizip.vcproj new file mode 100644 index 0000000..ad40239 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/vstudio/vc9/minizip.vcproj @@ -0,0 +1,562 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/vstudio/vc9/testzlib.vcproj b/software/scsi2sd-util/zlib-1.2.8/contrib/vstudio/vc9/testzlib.vcproj new file mode 100644 index 0000000..c9f19d2 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/vstudio/vc9/testzlib.vcproj @@ -0,0 +1,852 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/vstudio/vc9/testzlibdll.vcproj b/software/scsi2sd-util/zlib-1.2.8/contrib/vstudio/vc9/testzlibdll.vcproj new file mode 100644 index 0000000..d7530fd --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/vstudio/vc9/testzlibdll.vcproj @@ -0,0 +1,565 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/vstudio/vc9/zlib.rc b/software/scsi2sd-util/zlib-1.2.8/contrib/vstudio/vc9/zlib.rc new file mode 100644 index 0000000..d42f191 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/vstudio/vc9/zlib.rc @@ -0,0 +1,32 @@ +#include + +#define IDR_VERSION1 1 +IDR_VERSION1 VERSIONINFO MOVEABLE IMPURE LOADONCALL DISCARDABLE + FILEVERSION 1,2,8,0 + PRODUCTVERSION 1,2,8,0 + FILEFLAGSMASK VS_FFI_FILEFLAGSMASK + FILEFLAGS 0 + FILEOS VOS_DOS_WINDOWS32 + FILETYPE VFT_DLL + FILESUBTYPE 0 // not used +BEGIN + BLOCK "StringFileInfo" + BEGIN + BLOCK "040904E4" + //language ID = U.S. English, char set = Windows, Multilingual + + BEGIN + VALUE "FileDescription", "zlib data compression and ZIP file I/O library\0" + VALUE "FileVersion", "1.2.8\0" + VALUE "InternalName", "zlib\0" + VALUE "OriginalFilename", "zlibwapi.dll\0" + VALUE "ProductName", "ZLib.DLL\0" + VALUE "Comments","DLL support by Alessandro Iacopetti & Gilles Vollant\0" + VALUE "LegalCopyright", "(C) 1995-2013 Jean-loup Gailly & Mark Adler\0" + END + END + BLOCK "VarFileInfo" + BEGIN + VALUE "Translation", 0x0409, 1252 + END +END diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/vstudio/vc9/zlibstat.vcproj b/software/scsi2sd-util/zlib-1.2.8/contrib/vstudio/vc9/zlibstat.vcproj new file mode 100644 index 0000000..d4ffb46 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/vstudio/vc9/zlibstat.vcproj @@ -0,0 +1,835 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/vstudio/vc9/zlibvc.def b/software/scsi2sd-util/zlib-1.2.8/contrib/vstudio/vc9/zlibvc.def new file mode 100644 index 0000000..980fed3 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/vstudio/vc9/zlibvc.def @@ -0,0 +1,143 @@ +LIBRARY +; zlib data compression and ZIP file I/O library + +VERSION 1.2.8 + +EXPORTS + adler32 @1 + compress @2 + crc32 @3 + deflate @4 + deflateCopy @5 + deflateEnd @6 + deflateInit2_ @7 + deflateInit_ @8 + deflateParams @9 + deflateReset @10 + deflateSetDictionary @11 + gzclose @12 + gzdopen @13 + gzerror @14 + gzflush @15 + gzopen @16 + gzread @17 + gzwrite @18 + inflate @19 + inflateEnd @20 + inflateInit2_ @21 + inflateInit_ @22 + inflateReset @23 + inflateSetDictionary @24 + inflateSync @25 + uncompress @26 + zlibVersion @27 + gzprintf @28 + gzputc @29 + gzgetc @30 + gzseek @31 + gzrewind @32 + gztell @33 + gzeof @34 + gzsetparams @35 + zError @36 + inflateSyncPoint @37 + get_crc_table @38 + compress2 @39 + gzputs @40 + gzgets @41 + inflateCopy @42 + inflateBackInit_ @43 + inflateBack @44 + inflateBackEnd @45 + compressBound @46 + deflateBound @47 + gzclearerr @48 + gzungetc @49 + zlibCompileFlags @50 + deflatePrime @51 + deflatePending @52 + + unzOpen @61 + unzClose @62 + unzGetGlobalInfo @63 + unzGetCurrentFileInfo @64 + unzGoToFirstFile @65 + unzGoToNextFile @66 + unzOpenCurrentFile @67 + unzReadCurrentFile @68 + unzOpenCurrentFile3 @69 + unztell @70 + unzeof @71 + unzCloseCurrentFile @72 + unzGetGlobalComment @73 + unzStringFileNameCompare @74 + unzLocateFile @75 + unzGetLocalExtrafield @76 + unzOpen2 @77 + unzOpenCurrentFile2 @78 + unzOpenCurrentFilePassword @79 + + zipOpen @80 + zipOpenNewFileInZip @81 + zipWriteInFileInZip @82 + zipCloseFileInZip @83 + zipClose @84 + zipOpenNewFileInZip2 @86 + zipCloseFileInZipRaw @87 + zipOpen2 @88 + zipOpenNewFileInZip3 @89 + + unzGetFilePos @100 + unzGoToFilePos @101 + + fill_win32_filefunc @110 + +; zlibwapi v1.2.4 added: + fill_win32_filefunc64 @111 + fill_win32_filefunc64A @112 + fill_win32_filefunc64W @113 + + unzOpen64 @120 + unzOpen2_64 @121 + unzGetGlobalInfo64 @122 + unzGetCurrentFileInfo64 @124 + unzGetCurrentFileZStreamPos64 @125 + unztell64 @126 + unzGetFilePos64 @127 + unzGoToFilePos64 @128 + + zipOpen64 @130 + zipOpen2_64 @131 + zipOpenNewFileInZip64 @132 + zipOpenNewFileInZip2_64 @133 + zipOpenNewFileInZip3_64 @134 + zipOpenNewFileInZip4_64 @135 + zipCloseFileInZipRaw64 @136 + +; zlib1 v1.2.4 added: + adler32_combine @140 + crc32_combine @142 + deflateSetHeader @144 + deflateTune @145 + gzbuffer @146 + gzclose_r @147 + gzclose_w @148 + gzdirect @149 + gzoffset @150 + inflateGetHeader @156 + inflateMark @157 + inflatePrime @158 + inflateReset2 @159 + inflateUndermine @160 + +; zlib1 v1.2.6 added: + gzgetc_ @161 + inflateResetKeep @163 + deflateResetKeep @164 + +; zlib1 v1.2.7 added: + gzopen_w @165 + +; zlib1 v1.2.8 added: + inflateGetDictionary @166 + gzvprintf @167 diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/vstudio/vc9/zlibvc.sln b/software/scsi2sd-util/zlib-1.2.8/contrib/vstudio/vc9/zlibvc.sln new file mode 100644 index 0000000..75c64c3 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/vstudio/vc9/zlibvc.sln @@ -0,0 +1,144 @@ + +Microsoft Visual Studio Solution File, Format Version 10.00 +# Visual Studio 2008 +Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "zlibvc", "zlibvc.vcproj", "{8FD826F8-3739-44E6-8CC8-997122E53B8D}" +EndProject +Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "zlibstat", "zlibstat.vcproj", "{745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}" +EndProject +Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "testzlib", "testzlib.vcproj", "{AA6666AA-E09F-4135-9C0C-4FE50C3C654B}" +EndProject +Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "TestZlibDll", "testzlibdll.vcproj", "{C52F9E7B-498A-42BE-8DB4-85A15694366A}" + ProjectSection(ProjectDependencies) = postProject + {8FD826F8-3739-44E6-8CC8-997122E53B8D} = {8FD826F8-3739-44E6-8CC8-997122E53B8D} + EndProjectSection +EndProject +Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "minizip", "minizip.vcproj", "{48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}" + ProjectSection(ProjectDependencies) = postProject + {8FD826F8-3739-44E6-8CC8-997122E53B8D} = {8FD826F8-3739-44E6-8CC8-997122E53B8D} + EndProjectSection +EndProject +Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "miniunz", "miniunz.vcproj", "{C52F9E7B-498A-42BE-8DB4-85A15694382A}" + ProjectSection(ProjectDependencies) = postProject + {8FD826F8-3739-44E6-8CC8-997122E53B8D} = {8FD826F8-3739-44E6-8CC8-997122E53B8D} + EndProjectSection +EndProject +Global + GlobalSection(SolutionConfigurationPlatforms) = preSolution + Debug|Itanium = Debug|Itanium + Debug|Win32 = Debug|Win32 + Debug|x64 = Debug|x64 + Release|Itanium = Release|Itanium + Release|Win32 = Release|Win32 + Release|x64 = Release|x64 + ReleaseWithoutAsm|Itanium = ReleaseWithoutAsm|Itanium + ReleaseWithoutAsm|Win32 = ReleaseWithoutAsm|Win32 + ReleaseWithoutAsm|x64 = ReleaseWithoutAsm|x64 + EndGlobalSection + GlobalSection(ProjectConfigurationPlatforms) = postSolution + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Debug|Itanium.ActiveCfg = Debug|Itanium + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Debug|Itanium.Build.0 = Debug|Itanium + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Debug|Win32.ActiveCfg = Debug|Win32 + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Debug|Win32.Build.0 = Debug|Win32 + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Debug|x64.ActiveCfg = Debug|x64 + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Debug|x64.Build.0 = Debug|x64 + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Release|Itanium.ActiveCfg = Release|Itanium + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Release|Itanium.Build.0 = Release|Itanium + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Release|Win32.ActiveCfg = Release|Win32 + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Release|Win32.Build.0 = Release|Win32 + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Release|x64.ActiveCfg = Release|x64 + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Release|x64.Build.0 = Release|x64 + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.ReleaseWithoutAsm|Itanium.ActiveCfg = ReleaseWithoutAsm|Itanium + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.ReleaseWithoutAsm|Itanium.Build.0 = ReleaseWithoutAsm|Itanium + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.ReleaseWithoutAsm|Win32.ActiveCfg = ReleaseWithoutAsm|Win32 + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.ReleaseWithoutAsm|Win32.Build.0 = ReleaseWithoutAsm|Win32 + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.ReleaseWithoutAsm|x64.ActiveCfg = ReleaseWithoutAsm|x64 + {8FD826F8-3739-44E6-8CC8-997122E53B8D}.ReleaseWithoutAsm|x64.Build.0 = ReleaseWithoutAsm|x64 + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Debug|Itanium.ActiveCfg = Debug|Itanium + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Debug|Itanium.Build.0 = Debug|Itanium + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Debug|Win32.ActiveCfg = Debug|Win32 + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Debug|Win32.Build.0 = Debug|Win32 + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Debug|x64.ActiveCfg = Debug|x64 + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Debug|x64.Build.0 = Debug|x64 + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Release|Itanium.ActiveCfg = Release|Itanium + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Release|Itanium.Build.0 = Release|Itanium + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Release|Win32.ActiveCfg = Release|Win32 + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Release|Win32.Build.0 = Release|Win32 + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Release|x64.ActiveCfg = Release|x64 + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Release|x64.Build.0 = Release|x64 + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.ReleaseWithoutAsm|Itanium.ActiveCfg = ReleaseWithoutAsm|Itanium + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.ReleaseWithoutAsm|Itanium.Build.0 = ReleaseWithoutAsm|Itanium + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.ReleaseWithoutAsm|Win32.ActiveCfg = ReleaseWithoutAsm|Win32 + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.ReleaseWithoutAsm|Win32.Build.0 = ReleaseWithoutAsm|Win32 + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.ReleaseWithoutAsm|x64.ActiveCfg = ReleaseWithoutAsm|x64 + {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.ReleaseWithoutAsm|x64.Build.0 = ReleaseWithoutAsm|x64 + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Debug|Itanium.ActiveCfg = Debug|Itanium + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Debug|Itanium.Build.0 = Debug|Itanium + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Debug|Win32.ActiveCfg = Debug|Win32 + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Debug|Win32.Build.0 = Debug|Win32 + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Debug|x64.ActiveCfg = Debug|x64 + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Debug|x64.Build.0 = Debug|x64 + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Release|Itanium.ActiveCfg = Release|Itanium + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Release|Itanium.Build.0 = Release|Itanium + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Release|Win32.ActiveCfg = Release|Win32 + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Release|Win32.Build.0 = Release|Win32 + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Release|x64.ActiveCfg = Release|x64 + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Release|x64.Build.0 = Release|x64 + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|Itanium.ActiveCfg = ReleaseWithoutAsm|Itanium + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|Itanium.Build.0 = ReleaseWithoutAsm|Itanium + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|Win32.ActiveCfg = ReleaseWithoutAsm|Win32 + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|Win32.Build.0 = ReleaseWithoutAsm|Win32 + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|x64.ActiveCfg = ReleaseWithoutAsm|x64 + {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|x64.Build.0 = ReleaseWithoutAsm|x64 + {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Debug|Itanium.ActiveCfg = Debug|Itanium + {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Debug|Itanium.Build.0 = Debug|Itanium + {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Debug|Win32.ActiveCfg = Debug|Win32 + {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Debug|Win32.Build.0 = Debug|Win32 + {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Debug|x64.ActiveCfg = Debug|x64 + {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Debug|x64.Build.0 = Debug|x64 + {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Release|Itanium.ActiveCfg = Release|Itanium + {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Release|Itanium.Build.0 = Release|Itanium + {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Release|Win32.ActiveCfg = Release|Win32 + {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Release|Win32.Build.0 = Release|Win32 + {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Release|x64.ActiveCfg = Release|x64 + {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Release|x64.Build.0 = Release|x64 + {C52F9E7B-498A-42BE-8DB4-85A15694366A}.ReleaseWithoutAsm|Itanium.ActiveCfg = Release|Itanium + {C52F9E7B-498A-42BE-8DB4-85A15694366A}.ReleaseWithoutAsm|Itanium.Build.0 = Release|Itanium + {C52F9E7B-498A-42BE-8DB4-85A15694366A}.ReleaseWithoutAsm|Win32.ActiveCfg = Release|Win32 + {C52F9E7B-498A-42BE-8DB4-85A15694366A}.ReleaseWithoutAsm|x64.ActiveCfg = Release|x64 + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Debug|Itanium.ActiveCfg = Debug|Itanium + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Debug|Itanium.Build.0 = Debug|Itanium + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Debug|Win32.ActiveCfg = Debug|Win32 + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Debug|Win32.Build.0 = Debug|Win32 + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Debug|x64.ActiveCfg = Debug|x64 + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Debug|x64.Build.0 = Debug|x64 + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Release|Itanium.ActiveCfg = Release|Itanium + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Release|Itanium.Build.0 = Release|Itanium + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Release|Win32.ActiveCfg = Release|Win32 + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Release|Win32.Build.0 = Release|Win32 + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Release|x64.ActiveCfg = Release|x64 + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Release|x64.Build.0 = Release|x64 + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|Itanium.ActiveCfg = Release|Itanium + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|Itanium.Build.0 = Release|Itanium + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|Win32.ActiveCfg = Release|Win32 + {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|x64.ActiveCfg = Release|x64 + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Debug|Itanium.ActiveCfg = Debug|Itanium + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Debug|Itanium.Build.0 = Debug|Itanium + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Debug|Win32.ActiveCfg = Debug|Win32 + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Debug|Win32.Build.0 = Debug|Win32 + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Debug|x64.ActiveCfg = Debug|x64 + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Debug|x64.Build.0 = Debug|x64 + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Release|Itanium.ActiveCfg = Release|Itanium + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Release|Itanium.Build.0 = Release|Itanium + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Release|Win32.ActiveCfg = Release|Win32 + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Release|Win32.Build.0 = Release|Win32 + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Release|x64.ActiveCfg = Release|x64 + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Release|x64.Build.0 = Release|x64 + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.ReleaseWithoutAsm|Itanium.ActiveCfg = Release|Itanium + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.ReleaseWithoutAsm|Itanium.Build.0 = Release|Itanium + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.ReleaseWithoutAsm|Win32.ActiveCfg = Release|Win32 + {C52F9E7B-498A-42BE-8DB4-85A15694382A}.ReleaseWithoutAsm|x64.ActiveCfg = Release|x64 + EndGlobalSection + GlobalSection(SolutionProperties) = preSolution + HideSolutionNode = FALSE + EndGlobalSection +EndGlobal diff --git a/software/scsi2sd-util/zlib-1.2.8/contrib/vstudio/vc9/zlibvc.vcproj b/software/scsi2sd-util/zlib-1.2.8/contrib/vstudio/vc9/zlibvc.vcproj new file mode 100644 index 0000000..95bb241 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/contrib/vstudio/vc9/zlibvc.vcproj @@ -0,0 +1,1156 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/software/scsi2sd-util/zlib-1.2.8/crc32.c b/software/scsi2sd-util/zlib-1.2.8/crc32.c new file mode 100644 index 0000000..979a719 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/crc32.c @@ -0,0 +1,425 @@ +/* crc32.c -- compute the CRC-32 of a data stream + * Copyright (C) 1995-2006, 2010, 2011, 2012 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + * + * Thanks to Rodney Brown for his contribution of faster + * CRC methods: exclusive-oring 32 bits of data at a time, and pre-computing + * tables for updating the shift register in one step with three exclusive-ors + * instead of four steps with four exclusive-ors. This results in about a + * factor of two increase in speed on a Power PC G4 (PPC7455) using gcc -O3. + */ + +/* @(#) $Id$ */ + +/* + Note on the use of DYNAMIC_CRC_TABLE: there is no mutex or semaphore + protection on the static variables used to control the first-use generation + of the crc tables. Therefore, if you #define DYNAMIC_CRC_TABLE, you should + first call get_crc_table() to initialize the tables before allowing more than + one thread to use crc32(). + + DYNAMIC_CRC_TABLE and MAKECRCH can be #defined to write out crc32.h. + */ + +#ifdef MAKECRCH +# include +# ifndef DYNAMIC_CRC_TABLE +# define DYNAMIC_CRC_TABLE +# endif /* !DYNAMIC_CRC_TABLE */ +#endif /* MAKECRCH */ + +#include "zutil.h" /* for STDC and FAR definitions */ + +#define local static + +/* Definitions for doing the crc four data bytes at a time. */ +#if !defined(NOBYFOUR) && defined(Z_U4) +# define BYFOUR +#endif +#ifdef BYFOUR + local unsigned long crc32_little OF((unsigned long, + const unsigned char FAR *, unsigned)); + local unsigned long crc32_big OF((unsigned long, + const unsigned char FAR *, unsigned)); +# define TBLS 8 +#else +# define TBLS 1 +#endif /* BYFOUR */ + +/* Local functions for crc concatenation */ +local unsigned long gf2_matrix_times OF((unsigned long *mat, + unsigned long vec)); +local void gf2_matrix_square OF((unsigned long *square, unsigned long *mat)); +local uLong crc32_combine_ OF((uLong crc1, uLong crc2, z_off64_t len2)); + + +#ifdef DYNAMIC_CRC_TABLE + +local volatile int crc_table_empty = 1; +local z_crc_t FAR crc_table[TBLS][256]; +local void make_crc_table OF((void)); +#ifdef MAKECRCH + local void write_table OF((FILE *, const z_crc_t FAR *)); +#endif /* MAKECRCH */ +/* + Generate tables for a byte-wise 32-bit CRC calculation on the polynomial: + x^32+x^26+x^23+x^22+x^16+x^12+x^11+x^10+x^8+x^7+x^5+x^4+x^2+x+1. + + Polynomials over GF(2) are represented in binary, one bit per coefficient, + with the lowest powers in the most significant bit. Then adding polynomials + is just exclusive-or, and multiplying a polynomial by x is a right shift by + one. If we call the above polynomial p, and represent a byte as the + polynomial q, also with the lowest power in the most significant bit (so the + byte 0xb1 is the polynomial x^7+x^3+x+1), then the CRC is (q*x^32) mod p, + where a mod b means the remainder after dividing a by b. + + This calculation is done using the shift-register method of multiplying and + taking the remainder. The register is initialized to zero, and for each + incoming bit, x^32 is added mod p to the register if the bit is a one (where + x^32 mod p is p+x^32 = x^26+...+1), and the register is multiplied mod p by + x (which is shifting right by one and adding x^32 mod p if the bit shifted + out is a one). We start with the highest power (least significant bit) of + q and repeat for all eight bits of q. + + The first table is simply the CRC of all possible eight bit values. This is + all the information needed to generate CRCs on data a byte at a time for all + combinations of CRC register values and incoming bytes. The remaining tables + allow for word-at-a-time CRC calculation for both big-endian and little- + endian machines, where a word is four bytes. +*/ +local void make_crc_table() +{ + z_crc_t c; + int n, k; + z_crc_t poly; /* polynomial exclusive-or pattern */ + /* terms of polynomial defining this crc (except x^32): */ + static volatile int first = 1; /* flag to limit concurrent making */ + static const unsigned char p[] = {0,1,2,4,5,7,8,10,11,12,16,22,23,26}; + + /* See if another task is already doing this (not thread-safe, but better + than nothing -- significantly reduces duration of vulnerability in + case the advice about DYNAMIC_CRC_TABLE is ignored) */ + if (first) { + first = 0; + + /* make exclusive-or pattern from polynomial (0xedb88320UL) */ + poly = 0; + for (n = 0; n < (int)(sizeof(p)/sizeof(unsigned char)); n++) + poly |= (z_crc_t)1 << (31 - p[n]); + + /* generate a crc for every 8-bit value */ + for (n = 0; n < 256; n++) { + c = (z_crc_t)n; + for (k = 0; k < 8; k++) + c = c & 1 ? poly ^ (c >> 1) : c >> 1; + crc_table[0][n] = c; + } + +#ifdef BYFOUR + /* generate crc for each value followed by one, two, and three zeros, + and then the byte reversal of those as well as the first table */ + for (n = 0; n < 256; n++) { + c = crc_table[0][n]; + crc_table[4][n] = ZSWAP32(c); + for (k = 1; k < 4; k++) { + c = crc_table[0][c & 0xff] ^ (c >> 8); + crc_table[k][n] = c; + crc_table[k + 4][n] = ZSWAP32(c); + } + } +#endif /* BYFOUR */ + + crc_table_empty = 0; + } + else { /* not first */ + /* wait for the other guy to finish (not efficient, but rare) */ + while (crc_table_empty) + ; + } + +#ifdef MAKECRCH + /* write out CRC tables to crc32.h */ + { + FILE *out; + + out = fopen("crc32.h", "w"); + if (out == NULL) return; + fprintf(out, "/* crc32.h -- tables for rapid CRC calculation\n"); + fprintf(out, " * Generated automatically by crc32.c\n */\n\n"); + fprintf(out, "local const z_crc_t FAR "); + fprintf(out, "crc_table[TBLS][256] =\n{\n {\n"); + write_table(out, crc_table[0]); +# ifdef BYFOUR + fprintf(out, "#ifdef BYFOUR\n"); + for (k = 1; k < 8; k++) { + fprintf(out, " },\n {\n"); + write_table(out, crc_table[k]); + } + fprintf(out, "#endif\n"); +# endif /* BYFOUR */ + fprintf(out, " }\n};\n"); + fclose(out); + } +#endif /* MAKECRCH */ +} + +#ifdef MAKECRCH +local void write_table(out, table) + FILE *out; + const z_crc_t FAR *table; +{ + int n; + + for (n = 0; n < 256; n++) + fprintf(out, "%s0x%08lxUL%s", n % 5 ? "" : " ", + (unsigned long)(table[n]), + n == 255 ? "\n" : (n % 5 == 4 ? ",\n" : ", ")); +} +#endif /* MAKECRCH */ + +#else /* !DYNAMIC_CRC_TABLE */ +/* ======================================================================== + * Tables of CRC-32s of all single-byte values, made by make_crc_table(). + */ +#include "crc32.h" +#endif /* DYNAMIC_CRC_TABLE */ + +/* ========================================================================= + * This function can be used by asm versions of crc32() + */ +const z_crc_t FAR * ZEXPORT get_crc_table() +{ +#ifdef DYNAMIC_CRC_TABLE + if (crc_table_empty) + make_crc_table(); +#endif /* DYNAMIC_CRC_TABLE */ + return (const z_crc_t FAR *)crc_table; +} + +/* ========================================================================= */ +#define DO1 crc = crc_table[0][((int)crc ^ (*buf++)) & 0xff] ^ (crc >> 8) +#define DO8 DO1; DO1; DO1; DO1; DO1; DO1; DO1; DO1 + +/* ========================================================================= */ +unsigned long ZEXPORT crc32(crc, buf, len) + unsigned long crc; + const unsigned char FAR *buf; + uInt len; +{ + if (buf == Z_NULL) return 0UL; + +#ifdef DYNAMIC_CRC_TABLE + if (crc_table_empty) + make_crc_table(); +#endif /* DYNAMIC_CRC_TABLE */ + +#ifdef BYFOUR + if (sizeof(void *) == sizeof(ptrdiff_t)) { + z_crc_t endian; + + endian = 1; + if (*((unsigned char *)(&endian))) + return crc32_little(crc, buf, len); + else + return crc32_big(crc, buf, len); + } +#endif /* BYFOUR */ + crc = crc ^ 0xffffffffUL; + while (len >= 8) { + DO8; + len -= 8; + } + if (len) do { + DO1; + } while (--len); + return crc ^ 0xffffffffUL; +} + +#ifdef BYFOUR + +/* ========================================================================= */ +#define DOLIT4 c ^= *buf4++; \ + c = crc_table[3][c & 0xff] ^ crc_table[2][(c >> 8) & 0xff] ^ \ + crc_table[1][(c >> 16) & 0xff] ^ crc_table[0][c >> 24] +#define DOLIT32 DOLIT4; DOLIT4; DOLIT4; DOLIT4; DOLIT4; DOLIT4; DOLIT4; DOLIT4 + +/* ========================================================================= */ +local unsigned long crc32_little(crc, buf, len) + unsigned long crc; + const unsigned char FAR *buf; + unsigned len; +{ + register z_crc_t c; + register const z_crc_t FAR *buf4; + + c = (z_crc_t)crc; + c = ~c; + while (len && ((ptrdiff_t)buf & 3)) { + c = crc_table[0][(c ^ *buf++) & 0xff] ^ (c >> 8); + len--; + } + + buf4 = (const z_crc_t FAR *)(const void FAR *)buf; + while (len >= 32) { + DOLIT32; + len -= 32; + } + while (len >= 4) { + DOLIT4; + len -= 4; + } + buf = (const unsigned char FAR *)buf4; + + if (len) do { + c = crc_table[0][(c ^ *buf++) & 0xff] ^ (c >> 8); + } while (--len); + c = ~c; + return (unsigned long)c; +} + +/* ========================================================================= */ +#define DOBIG4 c ^= *++buf4; \ + c = crc_table[4][c & 0xff] ^ crc_table[5][(c >> 8) & 0xff] ^ \ + crc_table[6][(c >> 16) & 0xff] ^ crc_table[7][c >> 24] +#define DOBIG32 DOBIG4; DOBIG4; DOBIG4; DOBIG4; DOBIG4; DOBIG4; DOBIG4; DOBIG4 + +/* ========================================================================= */ +local unsigned long crc32_big(crc, buf, len) + unsigned long crc; + const unsigned char FAR *buf; + unsigned len; +{ + register z_crc_t c; + register const z_crc_t FAR *buf4; + + c = ZSWAP32((z_crc_t)crc); + c = ~c; + while (len && ((ptrdiff_t)buf & 3)) { + c = crc_table[4][(c >> 24) ^ *buf++] ^ (c << 8); + len--; + } + + buf4 = (const z_crc_t FAR *)(const void FAR *)buf; + buf4--; + while (len >= 32) { + DOBIG32; + len -= 32; + } + while (len >= 4) { + DOBIG4; + len -= 4; + } + buf4++; + buf = (const unsigned char FAR *)buf4; + + if (len) do { + c = crc_table[4][(c >> 24) ^ *buf++] ^ (c << 8); + } while (--len); + c = ~c; + return (unsigned long)(ZSWAP32(c)); +} + +#endif /* BYFOUR */ + +#define GF2_DIM 32 /* dimension of GF(2) vectors (length of CRC) */ + +/* ========================================================================= */ +local unsigned long gf2_matrix_times(mat, vec) + unsigned long *mat; + unsigned long vec; +{ + unsigned long sum; + + sum = 0; + while (vec) { + if (vec & 1) + sum ^= *mat; + vec >>= 1; + mat++; + } + return sum; +} + +/* ========================================================================= */ +local void gf2_matrix_square(square, mat) + unsigned long *square; + unsigned long *mat; +{ + int n; + + for (n = 0; n < GF2_DIM; n++) + square[n] = gf2_matrix_times(mat, mat[n]); +} + +/* ========================================================================= */ +local uLong crc32_combine_(crc1, crc2, len2) + uLong crc1; + uLong crc2; + z_off64_t len2; +{ + int n; + unsigned long row; + unsigned long even[GF2_DIM]; /* even-power-of-two zeros operator */ + unsigned long odd[GF2_DIM]; /* odd-power-of-two zeros operator */ + + /* degenerate case (also disallow negative lengths) */ + if (len2 <= 0) + return crc1; + + /* put operator for one zero bit in odd */ + odd[0] = 0xedb88320UL; /* CRC-32 polynomial */ + row = 1; + for (n = 1; n < GF2_DIM; n++) { + odd[n] = row; + row <<= 1; + } + + /* put operator for two zero bits in even */ + gf2_matrix_square(even, odd); + + /* put operator for four zero bits in odd */ + gf2_matrix_square(odd, even); + + /* apply len2 zeros to crc1 (first square will put the operator for one + zero byte, eight zero bits, in even) */ + do { + /* apply zeros operator for this bit of len2 */ + gf2_matrix_square(even, odd); + if (len2 & 1) + crc1 = gf2_matrix_times(even, crc1); + len2 >>= 1; + + /* if no more bits set, then done */ + if (len2 == 0) + break; + + /* another iteration of the loop with odd and even swapped */ + gf2_matrix_square(odd, even); + if (len2 & 1) + crc1 = gf2_matrix_times(odd, crc1); + len2 >>= 1; + + /* if no more bits set, then done */ + } while (len2 != 0); + + /* return combined crc */ + crc1 ^= crc2; + return crc1; +} + +/* ========================================================================= */ +uLong ZEXPORT crc32_combine(crc1, crc2, len2) + uLong crc1; + uLong crc2; + z_off_t len2; +{ + return crc32_combine_(crc1, crc2, len2); +} + +uLong ZEXPORT crc32_combine64(crc1, crc2, len2) + uLong crc1; + uLong crc2; + z_off64_t len2; +{ + return crc32_combine_(crc1, crc2, len2); +} diff --git a/software/scsi2sd-util/zlib-1.2.8/crc32.h b/software/scsi2sd-util/zlib-1.2.8/crc32.h new file mode 100644 index 0000000..9e0c778 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/crc32.h @@ -0,0 +1,441 @@ +/* crc32.h -- tables for rapid CRC calculation + * Generated automatically by crc32.c + */ + +local const z_crc_t FAR crc_table[TBLS][256] = +{ + { + 0x00000000UL, 0x77073096UL, 0xee0e612cUL, 0x990951baUL, 0x076dc419UL, + 0x706af48fUL, 0xe963a535UL, 0x9e6495a3UL, 0x0edb8832UL, 0x79dcb8a4UL, + 0xe0d5e91eUL, 0x97d2d988UL, 0x09b64c2bUL, 0x7eb17cbdUL, 0xe7b82d07UL, + 0x90bf1d91UL, 0x1db71064UL, 0x6ab020f2UL, 0xf3b97148UL, 0x84be41deUL, + 0x1adad47dUL, 0x6ddde4ebUL, 0xf4d4b551UL, 0x83d385c7UL, 0x136c9856UL, + 0x646ba8c0UL, 0xfd62f97aUL, 0x8a65c9ecUL, 0x14015c4fUL, 0x63066cd9UL, + 0xfa0f3d63UL, 0x8d080df5UL, 0x3b6e20c8UL, 0x4c69105eUL, 0xd56041e4UL, + 0xa2677172UL, 0x3c03e4d1UL, 0x4b04d447UL, 0xd20d85fdUL, 0xa50ab56bUL, + 0x35b5a8faUL, 0x42b2986cUL, 0xdbbbc9d6UL, 0xacbcf940UL, 0x32d86ce3UL, + 0x45df5c75UL, 0xdcd60dcfUL, 0xabd13d59UL, 0x26d930acUL, 0x51de003aUL, + 0xc8d75180UL, 0xbfd06116UL, 0x21b4f4b5UL, 0x56b3c423UL, 0xcfba9599UL, + 0xb8bda50fUL, 0x2802b89eUL, 0x5f058808UL, 0xc60cd9b2UL, 0xb10be924UL, + 0x2f6f7c87UL, 0x58684c11UL, 0xc1611dabUL, 0xb6662d3dUL, 0x76dc4190UL, + 0x01db7106UL, 0x98d220bcUL, 0xefd5102aUL, 0x71b18589UL, 0x06b6b51fUL, + 0x9fbfe4a5UL, 0xe8b8d433UL, 0x7807c9a2UL, 0x0f00f934UL, 0x9609a88eUL, + 0xe10e9818UL, 0x7f6a0dbbUL, 0x086d3d2dUL, 0x91646c97UL, 0xe6635c01UL, + 0x6b6b51f4UL, 0x1c6c6162UL, 0x856530d8UL, 0xf262004eUL, 0x6c0695edUL, + 0x1b01a57bUL, 0x8208f4c1UL, 0xf50fc457UL, 0x65b0d9c6UL, 0x12b7e950UL, + 0x8bbeb8eaUL, 0xfcb9887cUL, 0x62dd1ddfUL, 0x15da2d49UL, 0x8cd37cf3UL, + 0xfbd44c65UL, 0x4db26158UL, 0x3ab551ceUL, 0xa3bc0074UL, 0xd4bb30e2UL, + 0x4adfa541UL, 0x3dd895d7UL, 0xa4d1c46dUL, 0xd3d6f4fbUL, 0x4369e96aUL, + 0x346ed9fcUL, 0xad678846UL, 0xda60b8d0UL, 0x44042d73UL, 0x33031de5UL, + 0xaa0a4c5fUL, 0xdd0d7cc9UL, 0x5005713cUL, 0x270241aaUL, 0xbe0b1010UL, + 0xc90c2086UL, 0x5768b525UL, 0x206f85b3UL, 0xb966d409UL, 0xce61e49fUL, + 0x5edef90eUL, 0x29d9c998UL, 0xb0d09822UL, 0xc7d7a8b4UL, 0x59b33d17UL, + 0x2eb40d81UL, 0xb7bd5c3bUL, 0xc0ba6cadUL, 0xedb88320UL, 0x9abfb3b6UL, + 0x03b6e20cUL, 0x74b1d29aUL, 0xead54739UL, 0x9dd277afUL, 0x04db2615UL, + 0x73dc1683UL, 0xe3630b12UL, 0x94643b84UL, 0x0d6d6a3eUL, 0x7a6a5aa8UL, + 0xe40ecf0bUL, 0x9309ff9dUL, 0x0a00ae27UL, 0x7d079eb1UL, 0xf00f9344UL, + 0x8708a3d2UL, 0x1e01f268UL, 0x6906c2feUL, 0xf762575dUL, 0x806567cbUL, + 0x196c3671UL, 0x6e6b06e7UL, 0xfed41b76UL, 0x89d32be0UL, 0x10da7a5aUL, + 0x67dd4accUL, 0xf9b9df6fUL, 0x8ebeeff9UL, 0x17b7be43UL, 0x60b08ed5UL, + 0xd6d6a3e8UL, 0xa1d1937eUL, 0x38d8c2c4UL, 0x4fdff252UL, 0xd1bb67f1UL, + 0xa6bc5767UL, 0x3fb506ddUL, 0x48b2364bUL, 0xd80d2bdaUL, 0xaf0a1b4cUL, + 0x36034af6UL, 0x41047a60UL, 0xdf60efc3UL, 0xa867df55UL, 0x316e8eefUL, + 0x4669be79UL, 0xcb61b38cUL, 0xbc66831aUL, 0x256fd2a0UL, 0x5268e236UL, + 0xcc0c7795UL, 0xbb0b4703UL, 0x220216b9UL, 0x5505262fUL, 0xc5ba3bbeUL, + 0xb2bd0b28UL, 0x2bb45a92UL, 0x5cb36a04UL, 0xc2d7ffa7UL, 0xb5d0cf31UL, + 0x2cd99e8bUL, 0x5bdeae1dUL, 0x9b64c2b0UL, 0xec63f226UL, 0x756aa39cUL, + 0x026d930aUL, 0x9c0906a9UL, 0xeb0e363fUL, 0x72076785UL, 0x05005713UL, + 0x95bf4a82UL, 0xe2b87a14UL, 0x7bb12baeUL, 0x0cb61b38UL, 0x92d28e9bUL, + 0xe5d5be0dUL, 0x7cdcefb7UL, 0x0bdbdf21UL, 0x86d3d2d4UL, 0xf1d4e242UL, + 0x68ddb3f8UL, 0x1fda836eUL, 0x81be16cdUL, 0xf6b9265bUL, 0x6fb077e1UL, + 0x18b74777UL, 0x88085ae6UL, 0xff0f6a70UL, 0x66063bcaUL, 0x11010b5cUL, + 0x8f659effUL, 0xf862ae69UL, 0x616bffd3UL, 0x166ccf45UL, 0xa00ae278UL, + 0xd70dd2eeUL, 0x4e048354UL, 0x3903b3c2UL, 0xa7672661UL, 0xd06016f7UL, + 0x4969474dUL, 0x3e6e77dbUL, 0xaed16a4aUL, 0xd9d65adcUL, 0x40df0b66UL, + 0x37d83bf0UL, 0xa9bcae53UL, 0xdebb9ec5UL, 0x47b2cf7fUL, 0x30b5ffe9UL, + 0xbdbdf21cUL, 0xcabac28aUL, 0x53b39330UL, 0x24b4a3a6UL, 0xbad03605UL, + 0xcdd70693UL, 0x54de5729UL, 0x23d967bfUL, 0xb3667a2eUL, 0xc4614ab8UL, + 0x5d681b02UL, 0x2a6f2b94UL, 0xb40bbe37UL, 0xc30c8ea1UL, 0x5a05df1bUL, + 0x2d02ef8dUL +#ifdef BYFOUR + }, + { + 0x00000000UL, 0x191b3141UL, 0x32366282UL, 0x2b2d53c3UL, 0x646cc504UL, + 0x7d77f445UL, 0x565aa786UL, 0x4f4196c7UL, 0xc8d98a08UL, 0xd1c2bb49UL, + 0xfaefe88aUL, 0xe3f4d9cbUL, 0xacb54f0cUL, 0xb5ae7e4dUL, 0x9e832d8eUL, + 0x87981ccfUL, 0x4ac21251UL, 0x53d92310UL, 0x78f470d3UL, 0x61ef4192UL, + 0x2eaed755UL, 0x37b5e614UL, 0x1c98b5d7UL, 0x05838496UL, 0x821b9859UL, + 0x9b00a918UL, 0xb02dfadbUL, 0xa936cb9aUL, 0xe6775d5dUL, 0xff6c6c1cUL, + 0xd4413fdfUL, 0xcd5a0e9eUL, 0x958424a2UL, 0x8c9f15e3UL, 0xa7b24620UL, + 0xbea97761UL, 0xf1e8e1a6UL, 0xe8f3d0e7UL, 0xc3de8324UL, 0xdac5b265UL, + 0x5d5daeaaUL, 0x44469febUL, 0x6f6bcc28UL, 0x7670fd69UL, 0x39316baeUL, + 0x202a5aefUL, 0x0b07092cUL, 0x121c386dUL, 0xdf4636f3UL, 0xc65d07b2UL, + 0xed705471UL, 0xf46b6530UL, 0xbb2af3f7UL, 0xa231c2b6UL, 0x891c9175UL, + 0x9007a034UL, 0x179fbcfbUL, 0x0e848dbaUL, 0x25a9de79UL, 0x3cb2ef38UL, + 0x73f379ffUL, 0x6ae848beUL, 0x41c51b7dUL, 0x58de2a3cUL, 0xf0794f05UL, + 0xe9627e44UL, 0xc24f2d87UL, 0xdb541cc6UL, 0x94158a01UL, 0x8d0ebb40UL, + 0xa623e883UL, 0xbf38d9c2UL, 0x38a0c50dUL, 0x21bbf44cUL, 0x0a96a78fUL, + 0x138d96ceUL, 0x5ccc0009UL, 0x45d73148UL, 0x6efa628bUL, 0x77e153caUL, + 0xbabb5d54UL, 0xa3a06c15UL, 0x888d3fd6UL, 0x91960e97UL, 0xded79850UL, + 0xc7cca911UL, 0xece1fad2UL, 0xf5facb93UL, 0x7262d75cUL, 0x6b79e61dUL, + 0x4054b5deUL, 0x594f849fUL, 0x160e1258UL, 0x0f152319UL, 0x243870daUL, + 0x3d23419bUL, 0x65fd6ba7UL, 0x7ce65ae6UL, 0x57cb0925UL, 0x4ed03864UL, + 0x0191aea3UL, 0x188a9fe2UL, 0x33a7cc21UL, 0x2abcfd60UL, 0xad24e1afUL, + 0xb43fd0eeUL, 0x9f12832dUL, 0x8609b26cUL, 0xc94824abUL, 0xd05315eaUL, + 0xfb7e4629UL, 0xe2657768UL, 0x2f3f79f6UL, 0x362448b7UL, 0x1d091b74UL, + 0x04122a35UL, 0x4b53bcf2UL, 0x52488db3UL, 0x7965de70UL, 0x607eef31UL, + 0xe7e6f3feUL, 0xfefdc2bfUL, 0xd5d0917cUL, 0xcccba03dUL, 0x838a36faUL, + 0x9a9107bbUL, 0xb1bc5478UL, 0xa8a76539UL, 0x3b83984bUL, 0x2298a90aUL, + 0x09b5fac9UL, 0x10aecb88UL, 0x5fef5d4fUL, 0x46f46c0eUL, 0x6dd93fcdUL, + 0x74c20e8cUL, 0xf35a1243UL, 0xea412302UL, 0xc16c70c1UL, 0xd8774180UL, + 0x9736d747UL, 0x8e2de606UL, 0xa500b5c5UL, 0xbc1b8484UL, 0x71418a1aUL, + 0x685abb5bUL, 0x4377e898UL, 0x5a6cd9d9UL, 0x152d4f1eUL, 0x0c367e5fUL, + 0x271b2d9cUL, 0x3e001cddUL, 0xb9980012UL, 0xa0833153UL, 0x8bae6290UL, + 0x92b553d1UL, 0xddf4c516UL, 0xc4eff457UL, 0xefc2a794UL, 0xf6d996d5UL, + 0xae07bce9UL, 0xb71c8da8UL, 0x9c31de6bUL, 0x852aef2aUL, 0xca6b79edUL, + 0xd37048acUL, 0xf85d1b6fUL, 0xe1462a2eUL, 0x66de36e1UL, 0x7fc507a0UL, + 0x54e85463UL, 0x4df36522UL, 0x02b2f3e5UL, 0x1ba9c2a4UL, 0x30849167UL, + 0x299fa026UL, 0xe4c5aeb8UL, 0xfdde9ff9UL, 0xd6f3cc3aUL, 0xcfe8fd7bUL, + 0x80a96bbcUL, 0x99b25afdUL, 0xb29f093eUL, 0xab84387fUL, 0x2c1c24b0UL, + 0x350715f1UL, 0x1e2a4632UL, 0x07317773UL, 0x4870e1b4UL, 0x516bd0f5UL, + 0x7a468336UL, 0x635db277UL, 0xcbfad74eUL, 0xd2e1e60fUL, 0xf9ccb5ccUL, + 0xe0d7848dUL, 0xaf96124aUL, 0xb68d230bUL, 0x9da070c8UL, 0x84bb4189UL, + 0x03235d46UL, 0x1a386c07UL, 0x31153fc4UL, 0x280e0e85UL, 0x674f9842UL, + 0x7e54a903UL, 0x5579fac0UL, 0x4c62cb81UL, 0x8138c51fUL, 0x9823f45eUL, + 0xb30ea79dUL, 0xaa1596dcUL, 0xe554001bUL, 0xfc4f315aUL, 0xd7626299UL, + 0xce7953d8UL, 0x49e14f17UL, 0x50fa7e56UL, 0x7bd72d95UL, 0x62cc1cd4UL, + 0x2d8d8a13UL, 0x3496bb52UL, 0x1fbbe891UL, 0x06a0d9d0UL, 0x5e7ef3ecUL, + 0x4765c2adUL, 0x6c48916eUL, 0x7553a02fUL, 0x3a1236e8UL, 0x230907a9UL, + 0x0824546aUL, 0x113f652bUL, 0x96a779e4UL, 0x8fbc48a5UL, 0xa4911b66UL, + 0xbd8a2a27UL, 0xf2cbbce0UL, 0xebd08da1UL, 0xc0fdde62UL, 0xd9e6ef23UL, + 0x14bce1bdUL, 0x0da7d0fcUL, 0x268a833fUL, 0x3f91b27eUL, 0x70d024b9UL, + 0x69cb15f8UL, 0x42e6463bUL, 0x5bfd777aUL, 0xdc656bb5UL, 0xc57e5af4UL, + 0xee530937UL, 0xf7483876UL, 0xb809aeb1UL, 0xa1129ff0UL, 0x8a3fcc33UL, + 0x9324fd72UL + }, + { + 0x00000000UL, 0x01c26a37UL, 0x0384d46eUL, 0x0246be59UL, 0x0709a8dcUL, + 0x06cbc2ebUL, 0x048d7cb2UL, 0x054f1685UL, 0x0e1351b8UL, 0x0fd13b8fUL, + 0x0d9785d6UL, 0x0c55efe1UL, 0x091af964UL, 0x08d89353UL, 0x0a9e2d0aUL, + 0x0b5c473dUL, 0x1c26a370UL, 0x1de4c947UL, 0x1fa2771eUL, 0x1e601d29UL, + 0x1b2f0bacUL, 0x1aed619bUL, 0x18abdfc2UL, 0x1969b5f5UL, 0x1235f2c8UL, + 0x13f798ffUL, 0x11b126a6UL, 0x10734c91UL, 0x153c5a14UL, 0x14fe3023UL, + 0x16b88e7aUL, 0x177ae44dUL, 0x384d46e0UL, 0x398f2cd7UL, 0x3bc9928eUL, + 0x3a0bf8b9UL, 0x3f44ee3cUL, 0x3e86840bUL, 0x3cc03a52UL, 0x3d025065UL, + 0x365e1758UL, 0x379c7d6fUL, 0x35dac336UL, 0x3418a901UL, 0x3157bf84UL, + 0x3095d5b3UL, 0x32d36beaUL, 0x331101ddUL, 0x246be590UL, 0x25a98fa7UL, + 0x27ef31feUL, 0x262d5bc9UL, 0x23624d4cUL, 0x22a0277bUL, 0x20e69922UL, + 0x2124f315UL, 0x2a78b428UL, 0x2bbade1fUL, 0x29fc6046UL, 0x283e0a71UL, + 0x2d711cf4UL, 0x2cb376c3UL, 0x2ef5c89aUL, 0x2f37a2adUL, 0x709a8dc0UL, + 0x7158e7f7UL, 0x731e59aeUL, 0x72dc3399UL, 0x7793251cUL, 0x76514f2bUL, + 0x7417f172UL, 0x75d59b45UL, 0x7e89dc78UL, 0x7f4bb64fUL, 0x7d0d0816UL, + 0x7ccf6221UL, 0x798074a4UL, 0x78421e93UL, 0x7a04a0caUL, 0x7bc6cafdUL, + 0x6cbc2eb0UL, 0x6d7e4487UL, 0x6f38fadeUL, 0x6efa90e9UL, 0x6bb5866cUL, + 0x6a77ec5bUL, 0x68315202UL, 0x69f33835UL, 0x62af7f08UL, 0x636d153fUL, + 0x612bab66UL, 0x60e9c151UL, 0x65a6d7d4UL, 0x6464bde3UL, 0x662203baUL, + 0x67e0698dUL, 0x48d7cb20UL, 0x4915a117UL, 0x4b531f4eUL, 0x4a917579UL, + 0x4fde63fcUL, 0x4e1c09cbUL, 0x4c5ab792UL, 0x4d98dda5UL, 0x46c49a98UL, + 0x4706f0afUL, 0x45404ef6UL, 0x448224c1UL, 0x41cd3244UL, 0x400f5873UL, + 0x4249e62aUL, 0x438b8c1dUL, 0x54f16850UL, 0x55330267UL, 0x5775bc3eUL, + 0x56b7d609UL, 0x53f8c08cUL, 0x523aaabbUL, 0x507c14e2UL, 0x51be7ed5UL, + 0x5ae239e8UL, 0x5b2053dfUL, 0x5966ed86UL, 0x58a487b1UL, 0x5deb9134UL, + 0x5c29fb03UL, 0x5e6f455aUL, 0x5fad2f6dUL, 0xe1351b80UL, 0xe0f771b7UL, + 0xe2b1cfeeUL, 0xe373a5d9UL, 0xe63cb35cUL, 0xe7fed96bUL, 0xe5b86732UL, + 0xe47a0d05UL, 0xef264a38UL, 0xeee4200fUL, 0xeca29e56UL, 0xed60f461UL, + 0xe82fe2e4UL, 0xe9ed88d3UL, 0xebab368aUL, 0xea695cbdUL, 0xfd13b8f0UL, + 0xfcd1d2c7UL, 0xfe976c9eUL, 0xff5506a9UL, 0xfa1a102cUL, 0xfbd87a1bUL, + 0xf99ec442UL, 0xf85cae75UL, 0xf300e948UL, 0xf2c2837fUL, 0xf0843d26UL, + 0xf1465711UL, 0xf4094194UL, 0xf5cb2ba3UL, 0xf78d95faUL, 0xf64fffcdUL, + 0xd9785d60UL, 0xd8ba3757UL, 0xdafc890eUL, 0xdb3ee339UL, 0xde71f5bcUL, + 0xdfb39f8bUL, 0xddf521d2UL, 0xdc374be5UL, 0xd76b0cd8UL, 0xd6a966efUL, + 0xd4efd8b6UL, 0xd52db281UL, 0xd062a404UL, 0xd1a0ce33UL, 0xd3e6706aUL, + 0xd2241a5dUL, 0xc55efe10UL, 0xc49c9427UL, 0xc6da2a7eUL, 0xc7184049UL, + 0xc25756ccUL, 0xc3953cfbUL, 0xc1d382a2UL, 0xc011e895UL, 0xcb4dafa8UL, + 0xca8fc59fUL, 0xc8c97bc6UL, 0xc90b11f1UL, 0xcc440774UL, 0xcd866d43UL, + 0xcfc0d31aUL, 0xce02b92dUL, 0x91af9640UL, 0x906dfc77UL, 0x922b422eUL, + 0x93e92819UL, 0x96a63e9cUL, 0x976454abUL, 0x9522eaf2UL, 0x94e080c5UL, + 0x9fbcc7f8UL, 0x9e7eadcfUL, 0x9c381396UL, 0x9dfa79a1UL, 0x98b56f24UL, + 0x99770513UL, 0x9b31bb4aUL, 0x9af3d17dUL, 0x8d893530UL, 0x8c4b5f07UL, + 0x8e0de15eUL, 0x8fcf8b69UL, 0x8a809decUL, 0x8b42f7dbUL, 0x89044982UL, + 0x88c623b5UL, 0x839a6488UL, 0x82580ebfUL, 0x801eb0e6UL, 0x81dcdad1UL, + 0x8493cc54UL, 0x8551a663UL, 0x8717183aUL, 0x86d5720dUL, 0xa9e2d0a0UL, + 0xa820ba97UL, 0xaa6604ceUL, 0xaba46ef9UL, 0xaeeb787cUL, 0xaf29124bUL, + 0xad6fac12UL, 0xacadc625UL, 0xa7f18118UL, 0xa633eb2fUL, 0xa4755576UL, + 0xa5b73f41UL, 0xa0f829c4UL, 0xa13a43f3UL, 0xa37cfdaaUL, 0xa2be979dUL, + 0xb5c473d0UL, 0xb40619e7UL, 0xb640a7beUL, 0xb782cd89UL, 0xb2cddb0cUL, + 0xb30fb13bUL, 0xb1490f62UL, 0xb08b6555UL, 0xbbd72268UL, 0xba15485fUL, + 0xb853f606UL, 0xb9919c31UL, 0xbcde8ab4UL, 0xbd1ce083UL, 0xbf5a5edaUL, + 0xbe9834edUL + }, + { + 0x00000000UL, 0xb8bc6765UL, 0xaa09c88bUL, 0x12b5afeeUL, 0x8f629757UL, + 0x37def032UL, 0x256b5fdcUL, 0x9dd738b9UL, 0xc5b428efUL, 0x7d084f8aUL, + 0x6fbde064UL, 0xd7018701UL, 0x4ad6bfb8UL, 0xf26ad8ddUL, 0xe0df7733UL, + 0x58631056UL, 0x5019579fUL, 0xe8a530faUL, 0xfa109f14UL, 0x42acf871UL, + 0xdf7bc0c8UL, 0x67c7a7adUL, 0x75720843UL, 0xcdce6f26UL, 0x95ad7f70UL, + 0x2d111815UL, 0x3fa4b7fbUL, 0x8718d09eUL, 0x1acfe827UL, 0xa2738f42UL, + 0xb0c620acUL, 0x087a47c9UL, 0xa032af3eUL, 0x188ec85bUL, 0x0a3b67b5UL, + 0xb28700d0UL, 0x2f503869UL, 0x97ec5f0cUL, 0x8559f0e2UL, 0x3de59787UL, + 0x658687d1UL, 0xdd3ae0b4UL, 0xcf8f4f5aUL, 0x7733283fUL, 0xeae41086UL, + 0x525877e3UL, 0x40edd80dUL, 0xf851bf68UL, 0xf02bf8a1UL, 0x48979fc4UL, + 0x5a22302aUL, 0xe29e574fUL, 0x7f496ff6UL, 0xc7f50893UL, 0xd540a77dUL, + 0x6dfcc018UL, 0x359fd04eUL, 0x8d23b72bUL, 0x9f9618c5UL, 0x272a7fa0UL, + 0xbafd4719UL, 0x0241207cUL, 0x10f48f92UL, 0xa848e8f7UL, 0x9b14583dUL, + 0x23a83f58UL, 0x311d90b6UL, 0x89a1f7d3UL, 0x1476cf6aUL, 0xaccaa80fUL, + 0xbe7f07e1UL, 0x06c36084UL, 0x5ea070d2UL, 0xe61c17b7UL, 0xf4a9b859UL, + 0x4c15df3cUL, 0xd1c2e785UL, 0x697e80e0UL, 0x7bcb2f0eUL, 0xc377486bUL, + 0xcb0d0fa2UL, 0x73b168c7UL, 0x6104c729UL, 0xd9b8a04cUL, 0x446f98f5UL, + 0xfcd3ff90UL, 0xee66507eUL, 0x56da371bUL, 0x0eb9274dUL, 0xb6054028UL, + 0xa4b0efc6UL, 0x1c0c88a3UL, 0x81dbb01aUL, 0x3967d77fUL, 0x2bd27891UL, + 0x936e1ff4UL, 0x3b26f703UL, 0x839a9066UL, 0x912f3f88UL, 0x299358edUL, + 0xb4446054UL, 0x0cf80731UL, 0x1e4da8dfUL, 0xa6f1cfbaUL, 0xfe92dfecUL, + 0x462eb889UL, 0x549b1767UL, 0xec277002UL, 0x71f048bbUL, 0xc94c2fdeUL, + 0xdbf98030UL, 0x6345e755UL, 0x6b3fa09cUL, 0xd383c7f9UL, 0xc1366817UL, + 0x798a0f72UL, 0xe45d37cbUL, 0x5ce150aeUL, 0x4e54ff40UL, 0xf6e89825UL, + 0xae8b8873UL, 0x1637ef16UL, 0x048240f8UL, 0xbc3e279dUL, 0x21e91f24UL, + 0x99557841UL, 0x8be0d7afUL, 0x335cb0caUL, 0xed59b63bUL, 0x55e5d15eUL, + 0x47507eb0UL, 0xffec19d5UL, 0x623b216cUL, 0xda874609UL, 0xc832e9e7UL, + 0x708e8e82UL, 0x28ed9ed4UL, 0x9051f9b1UL, 0x82e4565fUL, 0x3a58313aUL, + 0xa78f0983UL, 0x1f336ee6UL, 0x0d86c108UL, 0xb53aa66dUL, 0xbd40e1a4UL, + 0x05fc86c1UL, 0x1749292fUL, 0xaff54e4aUL, 0x322276f3UL, 0x8a9e1196UL, + 0x982bbe78UL, 0x2097d91dUL, 0x78f4c94bUL, 0xc048ae2eUL, 0xd2fd01c0UL, + 0x6a4166a5UL, 0xf7965e1cUL, 0x4f2a3979UL, 0x5d9f9697UL, 0xe523f1f2UL, + 0x4d6b1905UL, 0xf5d77e60UL, 0xe762d18eUL, 0x5fdeb6ebUL, 0xc2098e52UL, + 0x7ab5e937UL, 0x680046d9UL, 0xd0bc21bcUL, 0x88df31eaUL, 0x3063568fUL, + 0x22d6f961UL, 0x9a6a9e04UL, 0x07bda6bdUL, 0xbf01c1d8UL, 0xadb46e36UL, + 0x15080953UL, 0x1d724e9aUL, 0xa5ce29ffUL, 0xb77b8611UL, 0x0fc7e174UL, + 0x9210d9cdUL, 0x2aacbea8UL, 0x38191146UL, 0x80a57623UL, 0xd8c66675UL, + 0x607a0110UL, 0x72cfaefeUL, 0xca73c99bUL, 0x57a4f122UL, 0xef189647UL, + 0xfdad39a9UL, 0x45115eccUL, 0x764dee06UL, 0xcef18963UL, 0xdc44268dUL, + 0x64f841e8UL, 0xf92f7951UL, 0x41931e34UL, 0x5326b1daUL, 0xeb9ad6bfUL, + 0xb3f9c6e9UL, 0x0b45a18cUL, 0x19f00e62UL, 0xa14c6907UL, 0x3c9b51beUL, + 0x842736dbUL, 0x96929935UL, 0x2e2efe50UL, 0x2654b999UL, 0x9ee8defcUL, + 0x8c5d7112UL, 0x34e11677UL, 0xa9362eceUL, 0x118a49abUL, 0x033fe645UL, + 0xbb838120UL, 0xe3e09176UL, 0x5b5cf613UL, 0x49e959fdUL, 0xf1553e98UL, + 0x6c820621UL, 0xd43e6144UL, 0xc68bceaaUL, 0x7e37a9cfUL, 0xd67f4138UL, + 0x6ec3265dUL, 0x7c7689b3UL, 0xc4caeed6UL, 0x591dd66fUL, 0xe1a1b10aUL, + 0xf3141ee4UL, 0x4ba87981UL, 0x13cb69d7UL, 0xab770eb2UL, 0xb9c2a15cUL, + 0x017ec639UL, 0x9ca9fe80UL, 0x241599e5UL, 0x36a0360bUL, 0x8e1c516eUL, + 0x866616a7UL, 0x3eda71c2UL, 0x2c6fde2cUL, 0x94d3b949UL, 0x090481f0UL, + 0xb1b8e695UL, 0xa30d497bUL, 0x1bb12e1eUL, 0x43d23e48UL, 0xfb6e592dUL, + 0xe9dbf6c3UL, 0x516791a6UL, 0xccb0a91fUL, 0x740cce7aUL, 0x66b96194UL, + 0xde0506f1UL + }, + { + 0x00000000UL, 0x96300777UL, 0x2c610eeeUL, 0xba510999UL, 0x19c46d07UL, + 0x8ff46a70UL, 0x35a563e9UL, 0xa395649eUL, 0x3288db0eUL, 0xa4b8dc79UL, + 0x1ee9d5e0UL, 0x88d9d297UL, 0x2b4cb609UL, 0xbd7cb17eUL, 0x072db8e7UL, + 0x911dbf90UL, 0x6410b71dUL, 0xf220b06aUL, 0x4871b9f3UL, 0xde41be84UL, + 0x7dd4da1aUL, 0xebe4dd6dUL, 0x51b5d4f4UL, 0xc785d383UL, 0x56986c13UL, + 0xc0a86b64UL, 0x7af962fdUL, 0xecc9658aUL, 0x4f5c0114UL, 0xd96c0663UL, + 0x633d0ffaUL, 0xf50d088dUL, 0xc8206e3bUL, 0x5e10694cUL, 0xe44160d5UL, + 0x727167a2UL, 0xd1e4033cUL, 0x47d4044bUL, 0xfd850dd2UL, 0x6bb50aa5UL, + 0xfaa8b535UL, 0x6c98b242UL, 0xd6c9bbdbUL, 0x40f9bcacUL, 0xe36cd832UL, + 0x755cdf45UL, 0xcf0dd6dcUL, 0x593dd1abUL, 0xac30d926UL, 0x3a00de51UL, + 0x8051d7c8UL, 0x1661d0bfUL, 0xb5f4b421UL, 0x23c4b356UL, 0x9995bacfUL, + 0x0fa5bdb8UL, 0x9eb80228UL, 0x0888055fUL, 0xb2d90cc6UL, 0x24e90bb1UL, + 0x877c6f2fUL, 0x114c6858UL, 0xab1d61c1UL, 0x3d2d66b6UL, 0x9041dc76UL, + 0x0671db01UL, 0xbc20d298UL, 0x2a10d5efUL, 0x8985b171UL, 0x1fb5b606UL, + 0xa5e4bf9fUL, 0x33d4b8e8UL, 0xa2c90778UL, 0x34f9000fUL, 0x8ea80996UL, + 0x18980ee1UL, 0xbb0d6a7fUL, 0x2d3d6d08UL, 0x976c6491UL, 0x015c63e6UL, + 0xf4516b6bUL, 0x62616c1cUL, 0xd8306585UL, 0x4e0062f2UL, 0xed95066cUL, + 0x7ba5011bUL, 0xc1f40882UL, 0x57c40ff5UL, 0xc6d9b065UL, 0x50e9b712UL, + 0xeab8be8bUL, 0x7c88b9fcUL, 0xdf1ddd62UL, 0x492dda15UL, 0xf37cd38cUL, + 0x654cd4fbUL, 0x5861b24dUL, 0xce51b53aUL, 0x7400bca3UL, 0xe230bbd4UL, + 0x41a5df4aUL, 0xd795d83dUL, 0x6dc4d1a4UL, 0xfbf4d6d3UL, 0x6ae96943UL, + 0xfcd96e34UL, 0x468867adUL, 0xd0b860daUL, 0x732d0444UL, 0xe51d0333UL, + 0x5f4c0aaaUL, 0xc97c0dddUL, 0x3c710550UL, 0xaa410227UL, 0x10100bbeUL, + 0x86200cc9UL, 0x25b56857UL, 0xb3856f20UL, 0x09d466b9UL, 0x9fe461ceUL, + 0x0ef9de5eUL, 0x98c9d929UL, 0x2298d0b0UL, 0xb4a8d7c7UL, 0x173db359UL, + 0x810db42eUL, 0x3b5cbdb7UL, 0xad6cbac0UL, 0x2083b8edUL, 0xb6b3bf9aUL, + 0x0ce2b603UL, 0x9ad2b174UL, 0x3947d5eaUL, 0xaf77d29dUL, 0x1526db04UL, + 0x8316dc73UL, 0x120b63e3UL, 0x843b6494UL, 0x3e6a6d0dUL, 0xa85a6a7aUL, + 0x0bcf0ee4UL, 0x9dff0993UL, 0x27ae000aUL, 0xb19e077dUL, 0x44930ff0UL, + 0xd2a30887UL, 0x68f2011eUL, 0xfec20669UL, 0x5d5762f7UL, 0xcb676580UL, + 0x71366c19UL, 0xe7066b6eUL, 0x761bd4feUL, 0xe02bd389UL, 0x5a7ada10UL, + 0xcc4add67UL, 0x6fdfb9f9UL, 0xf9efbe8eUL, 0x43beb717UL, 0xd58eb060UL, + 0xe8a3d6d6UL, 0x7e93d1a1UL, 0xc4c2d838UL, 0x52f2df4fUL, 0xf167bbd1UL, + 0x6757bca6UL, 0xdd06b53fUL, 0x4b36b248UL, 0xda2b0dd8UL, 0x4c1b0aafUL, + 0xf64a0336UL, 0x607a0441UL, 0xc3ef60dfUL, 0x55df67a8UL, 0xef8e6e31UL, + 0x79be6946UL, 0x8cb361cbUL, 0x1a8366bcUL, 0xa0d26f25UL, 0x36e26852UL, + 0x95770cccUL, 0x03470bbbUL, 0xb9160222UL, 0x2f260555UL, 0xbe3bbac5UL, + 0x280bbdb2UL, 0x925ab42bUL, 0x046ab35cUL, 0xa7ffd7c2UL, 0x31cfd0b5UL, + 0x8b9ed92cUL, 0x1daede5bUL, 0xb0c2649bUL, 0x26f263ecUL, 0x9ca36a75UL, + 0x0a936d02UL, 0xa906099cUL, 0x3f360eebUL, 0x85670772UL, 0x13570005UL, + 0x824abf95UL, 0x147ab8e2UL, 0xae2bb17bUL, 0x381bb60cUL, 0x9b8ed292UL, + 0x0dbed5e5UL, 0xb7efdc7cUL, 0x21dfdb0bUL, 0xd4d2d386UL, 0x42e2d4f1UL, + 0xf8b3dd68UL, 0x6e83da1fUL, 0xcd16be81UL, 0x5b26b9f6UL, 0xe177b06fUL, + 0x7747b718UL, 0xe65a0888UL, 0x706a0fffUL, 0xca3b0666UL, 0x5c0b0111UL, + 0xff9e658fUL, 0x69ae62f8UL, 0xd3ff6b61UL, 0x45cf6c16UL, 0x78e20aa0UL, + 0xeed20dd7UL, 0x5483044eUL, 0xc2b30339UL, 0x612667a7UL, 0xf71660d0UL, + 0x4d476949UL, 0xdb776e3eUL, 0x4a6ad1aeUL, 0xdc5ad6d9UL, 0x660bdf40UL, + 0xf03bd837UL, 0x53aebca9UL, 0xc59ebbdeUL, 0x7fcfb247UL, 0xe9ffb530UL, + 0x1cf2bdbdUL, 0x8ac2bacaUL, 0x3093b353UL, 0xa6a3b424UL, 0x0536d0baUL, + 0x9306d7cdUL, 0x2957de54UL, 0xbf67d923UL, 0x2e7a66b3UL, 0xb84a61c4UL, + 0x021b685dUL, 0x942b6f2aUL, 0x37be0bb4UL, 0xa18e0cc3UL, 0x1bdf055aUL, + 0x8def022dUL + }, + { + 0x00000000UL, 0x41311b19UL, 0x82623632UL, 0xc3532d2bUL, 0x04c56c64UL, + 0x45f4777dUL, 0x86a75a56UL, 0xc796414fUL, 0x088ad9c8UL, 0x49bbc2d1UL, + 0x8ae8effaUL, 0xcbd9f4e3UL, 0x0c4fb5acUL, 0x4d7eaeb5UL, 0x8e2d839eUL, + 0xcf1c9887UL, 0x5112c24aUL, 0x1023d953UL, 0xd370f478UL, 0x9241ef61UL, + 0x55d7ae2eUL, 0x14e6b537UL, 0xd7b5981cUL, 0x96848305UL, 0x59981b82UL, + 0x18a9009bUL, 0xdbfa2db0UL, 0x9acb36a9UL, 0x5d5d77e6UL, 0x1c6c6cffUL, + 0xdf3f41d4UL, 0x9e0e5acdUL, 0xa2248495UL, 0xe3159f8cUL, 0x2046b2a7UL, + 0x6177a9beUL, 0xa6e1e8f1UL, 0xe7d0f3e8UL, 0x2483dec3UL, 0x65b2c5daUL, + 0xaaae5d5dUL, 0xeb9f4644UL, 0x28cc6b6fUL, 0x69fd7076UL, 0xae6b3139UL, + 0xef5a2a20UL, 0x2c09070bUL, 0x6d381c12UL, 0xf33646dfUL, 0xb2075dc6UL, + 0x715470edUL, 0x30656bf4UL, 0xf7f32abbUL, 0xb6c231a2UL, 0x75911c89UL, + 0x34a00790UL, 0xfbbc9f17UL, 0xba8d840eUL, 0x79dea925UL, 0x38efb23cUL, + 0xff79f373UL, 0xbe48e86aUL, 0x7d1bc541UL, 0x3c2ade58UL, 0x054f79f0UL, + 0x447e62e9UL, 0x872d4fc2UL, 0xc61c54dbUL, 0x018a1594UL, 0x40bb0e8dUL, + 0x83e823a6UL, 0xc2d938bfUL, 0x0dc5a038UL, 0x4cf4bb21UL, 0x8fa7960aUL, + 0xce968d13UL, 0x0900cc5cUL, 0x4831d745UL, 0x8b62fa6eUL, 0xca53e177UL, + 0x545dbbbaUL, 0x156ca0a3UL, 0xd63f8d88UL, 0x970e9691UL, 0x5098d7deUL, + 0x11a9ccc7UL, 0xd2fae1ecUL, 0x93cbfaf5UL, 0x5cd76272UL, 0x1de6796bUL, + 0xdeb55440UL, 0x9f844f59UL, 0x58120e16UL, 0x1923150fUL, 0xda703824UL, + 0x9b41233dUL, 0xa76bfd65UL, 0xe65ae67cUL, 0x2509cb57UL, 0x6438d04eUL, + 0xa3ae9101UL, 0xe29f8a18UL, 0x21cca733UL, 0x60fdbc2aUL, 0xafe124adUL, + 0xeed03fb4UL, 0x2d83129fUL, 0x6cb20986UL, 0xab2448c9UL, 0xea1553d0UL, + 0x29467efbUL, 0x687765e2UL, 0xf6793f2fUL, 0xb7482436UL, 0x741b091dUL, + 0x352a1204UL, 0xf2bc534bUL, 0xb38d4852UL, 0x70de6579UL, 0x31ef7e60UL, + 0xfef3e6e7UL, 0xbfc2fdfeUL, 0x7c91d0d5UL, 0x3da0cbccUL, 0xfa368a83UL, + 0xbb07919aUL, 0x7854bcb1UL, 0x3965a7a8UL, 0x4b98833bUL, 0x0aa99822UL, + 0xc9fab509UL, 0x88cbae10UL, 0x4f5def5fUL, 0x0e6cf446UL, 0xcd3fd96dUL, + 0x8c0ec274UL, 0x43125af3UL, 0x022341eaUL, 0xc1706cc1UL, 0x804177d8UL, + 0x47d73697UL, 0x06e62d8eUL, 0xc5b500a5UL, 0x84841bbcUL, 0x1a8a4171UL, + 0x5bbb5a68UL, 0x98e87743UL, 0xd9d96c5aUL, 0x1e4f2d15UL, 0x5f7e360cUL, + 0x9c2d1b27UL, 0xdd1c003eUL, 0x120098b9UL, 0x533183a0UL, 0x9062ae8bUL, + 0xd153b592UL, 0x16c5f4ddUL, 0x57f4efc4UL, 0x94a7c2efUL, 0xd596d9f6UL, + 0xe9bc07aeUL, 0xa88d1cb7UL, 0x6bde319cUL, 0x2aef2a85UL, 0xed796bcaUL, + 0xac4870d3UL, 0x6f1b5df8UL, 0x2e2a46e1UL, 0xe136de66UL, 0xa007c57fUL, + 0x6354e854UL, 0x2265f34dUL, 0xe5f3b202UL, 0xa4c2a91bUL, 0x67918430UL, + 0x26a09f29UL, 0xb8aec5e4UL, 0xf99fdefdUL, 0x3accf3d6UL, 0x7bfde8cfUL, + 0xbc6ba980UL, 0xfd5ab299UL, 0x3e099fb2UL, 0x7f3884abUL, 0xb0241c2cUL, + 0xf1150735UL, 0x32462a1eUL, 0x73773107UL, 0xb4e17048UL, 0xf5d06b51UL, + 0x3683467aUL, 0x77b25d63UL, 0x4ed7facbUL, 0x0fe6e1d2UL, 0xccb5ccf9UL, + 0x8d84d7e0UL, 0x4a1296afUL, 0x0b238db6UL, 0xc870a09dUL, 0x8941bb84UL, + 0x465d2303UL, 0x076c381aUL, 0xc43f1531UL, 0x850e0e28UL, 0x42984f67UL, + 0x03a9547eUL, 0xc0fa7955UL, 0x81cb624cUL, 0x1fc53881UL, 0x5ef42398UL, + 0x9da70eb3UL, 0xdc9615aaUL, 0x1b0054e5UL, 0x5a314ffcUL, 0x996262d7UL, + 0xd85379ceUL, 0x174fe149UL, 0x567efa50UL, 0x952dd77bUL, 0xd41ccc62UL, + 0x138a8d2dUL, 0x52bb9634UL, 0x91e8bb1fUL, 0xd0d9a006UL, 0xecf37e5eUL, + 0xadc26547UL, 0x6e91486cUL, 0x2fa05375UL, 0xe836123aUL, 0xa9070923UL, + 0x6a542408UL, 0x2b653f11UL, 0xe479a796UL, 0xa548bc8fUL, 0x661b91a4UL, + 0x272a8abdUL, 0xe0bccbf2UL, 0xa18dd0ebUL, 0x62defdc0UL, 0x23efe6d9UL, + 0xbde1bc14UL, 0xfcd0a70dUL, 0x3f838a26UL, 0x7eb2913fUL, 0xb924d070UL, + 0xf815cb69UL, 0x3b46e642UL, 0x7a77fd5bUL, 0xb56b65dcUL, 0xf45a7ec5UL, + 0x370953eeUL, 0x763848f7UL, 0xb1ae09b8UL, 0xf09f12a1UL, 0x33cc3f8aUL, + 0x72fd2493UL + }, + { + 0x00000000UL, 0x376ac201UL, 0x6ed48403UL, 0x59be4602UL, 0xdca80907UL, + 0xebc2cb06UL, 0xb27c8d04UL, 0x85164f05UL, 0xb851130eUL, 0x8f3bd10fUL, + 0xd685970dUL, 0xe1ef550cUL, 0x64f91a09UL, 0x5393d808UL, 0x0a2d9e0aUL, + 0x3d475c0bUL, 0x70a3261cUL, 0x47c9e41dUL, 0x1e77a21fUL, 0x291d601eUL, + 0xac0b2f1bUL, 0x9b61ed1aUL, 0xc2dfab18UL, 0xf5b56919UL, 0xc8f23512UL, + 0xff98f713UL, 0xa626b111UL, 0x914c7310UL, 0x145a3c15UL, 0x2330fe14UL, + 0x7a8eb816UL, 0x4de47a17UL, 0xe0464d38UL, 0xd72c8f39UL, 0x8e92c93bUL, + 0xb9f80b3aUL, 0x3cee443fUL, 0x0b84863eUL, 0x523ac03cUL, 0x6550023dUL, + 0x58175e36UL, 0x6f7d9c37UL, 0x36c3da35UL, 0x01a91834UL, 0x84bf5731UL, + 0xb3d59530UL, 0xea6bd332UL, 0xdd011133UL, 0x90e56b24UL, 0xa78fa925UL, + 0xfe31ef27UL, 0xc95b2d26UL, 0x4c4d6223UL, 0x7b27a022UL, 0x2299e620UL, + 0x15f32421UL, 0x28b4782aUL, 0x1fdeba2bUL, 0x4660fc29UL, 0x710a3e28UL, + 0xf41c712dUL, 0xc376b32cUL, 0x9ac8f52eUL, 0xada2372fUL, 0xc08d9a70UL, + 0xf7e75871UL, 0xae591e73UL, 0x9933dc72UL, 0x1c259377UL, 0x2b4f5176UL, + 0x72f11774UL, 0x459bd575UL, 0x78dc897eUL, 0x4fb64b7fUL, 0x16080d7dUL, + 0x2162cf7cUL, 0xa4748079UL, 0x931e4278UL, 0xcaa0047aUL, 0xfdcac67bUL, + 0xb02ebc6cUL, 0x87447e6dUL, 0xdefa386fUL, 0xe990fa6eUL, 0x6c86b56bUL, + 0x5bec776aUL, 0x02523168UL, 0x3538f369UL, 0x087faf62UL, 0x3f156d63UL, + 0x66ab2b61UL, 0x51c1e960UL, 0xd4d7a665UL, 0xe3bd6464UL, 0xba032266UL, + 0x8d69e067UL, 0x20cbd748UL, 0x17a11549UL, 0x4e1f534bUL, 0x7975914aUL, + 0xfc63de4fUL, 0xcb091c4eUL, 0x92b75a4cUL, 0xa5dd984dUL, 0x989ac446UL, + 0xaff00647UL, 0xf64e4045UL, 0xc1248244UL, 0x4432cd41UL, 0x73580f40UL, + 0x2ae64942UL, 0x1d8c8b43UL, 0x5068f154UL, 0x67023355UL, 0x3ebc7557UL, + 0x09d6b756UL, 0x8cc0f853UL, 0xbbaa3a52UL, 0xe2147c50UL, 0xd57ebe51UL, + 0xe839e25aUL, 0xdf53205bUL, 0x86ed6659UL, 0xb187a458UL, 0x3491eb5dUL, + 0x03fb295cUL, 0x5a456f5eUL, 0x6d2fad5fUL, 0x801b35e1UL, 0xb771f7e0UL, + 0xeecfb1e2UL, 0xd9a573e3UL, 0x5cb33ce6UL, 0x6bd9fee7UL, 0x3267b8e5UL, + 0x050d7ae4UL, 0x384a26efUL, 0x0f20e4eeUL, 0x569ea2ecUL, 0x61f460edUL, + 0xe4e22fe8UL, 0xd388ede9UL, 0x8a36abebUL, 0xbd5c69eaUL, 0xf0b813fdUL, + 0xc7d2d1fcUL, 0x9e6c97feUL, 0xa90655ffUL, 0x2c101afaUL, 0x1b7ad8fbUL, + 0x42c49ef9UL, 0x75ae5cf8UL, 0x48e900f3UL, 0x7f83c2f2UL, 0x263d84f0UL, + 0x115746f1UL, 0x944109f4UL, 0xa32bcbf5UL, 0xfa958df7UL, 0xcdff4ff6UL, + 0x605d78d9UL, 0x5737bad8UL, 0x0e89fcdaUL, 0x39e33edbUL, 0xbcf571deUL, + 0x8b9fb3dfUL, 0xd221f5ddUL, 0xe54b37dcUL, 0xd80c6bd7UL, 0xef66a9d6UL, + 0xb6d8efd4UL, 0x81b22dd5UL, 0x04a462d0UL, 0x33cea0d1UL, 0x6a70e6d3UL, + 0x5d1a24d2UL, 0x10fe5ec5UL, 0x27949cc4UL, 0x7e2adac6UL, 0x494018c7UL, + 0xcc5657c2UL, 0xfb3c95c3UL, 0xa282d3c1UL, 0x95e811c0UL, 0xa8af4dcbUL, + 0x9fc58fcaUL, 0xc67bc9c8UL, 0xf1110bc9UL, 0x740744ccUL, 0x436d86cdUL, + 0x1ad3c0cfUL, 0x2db902ceUL, 0x4096af91UL, 0x77fc6d90UL, 0x2e422b92UL, + 0x1928e993UL, 0x9c3ea696UL, 0xab546497UL, 0xf2ea2295UL, 0xc580e094UL, + 0xf8c7bc9fUL, 0xcfad7e9eUL, 0x9613389cUL, 0xa179fa9dUL, 0x246fb598UL, + 0x13057799UL, 0x4abb319bUL, 0x7dd1f39aUL, 0x3035898dUL, 0x075f4b8cUL, + 0x5ee10d8eUL, 0x698bcf8fUL, 0xec9d808aUL, 0xdbf7428bUL, 0x82490489UL, + 0xb523c688UL, 0x88649a83UL, 0xbf0e5882UL, 0xe6b01e80UL, 0xd1dadc81UL, + 0x54cc9384UL, 0x63a65185UL, 0x3a181787UL, 0x0d72d586UL, 0xa0d0e2a9UL, + 0x97ba20a8UL, 0xce0466aaUL, 0xf96ea4abUL, 0x7c78ebaeUL, 0x4b1229afUL, + 0x12ac6fadUL, 0x25c6adacUL, 0x1881f1a7UL, 0x2feb33a6UL, 0x765575a4UL, + 0x413fb7a5UL, 0xc429f8a0UL, 0xf3433aa1UL, 0xaafd7ca3UL, 0x9d97bea2UL, + 0xd073c4b5UL, 0xe71906b4UL, 0xbea740b6UL, 0x89cd82b7UL, 0x0cdbcdb2UL, + 0x3bb10fb3UL, 0x620f49b1UL, 0x55658bb0UL, 0x6822d7bbUL, 0x5f4815baUL, + 0x06f653b8UL, 0x319c91b9UL, 0xb48adebcUL, 0x83e01cbdUL, 0xda5e5abfUL, + 0xed3498beUL + }, + { + 0x00000000UL, 0x6567bcb8UL, 0x8bc809aaUL, 0xeeafb512UL, 0x5797628fUL, + 0x32f0de37UL, 0xdc5f6b25UL, 0xb938d79dUL, 0xef28b4c5UL, 0x8a4f087dUL, + 0x64e0bd6fUL, 0x018701d7UL, 0xb8bfd64aUL, 0xddd86af2UL, 0x3377dfe0UL, + 0x56106358UL, 0x9f571950UL, 0xfa30a5e8UL, 0x149f10faUL, 0x71f8ac42UL, + 0xc8c07bdfUL, 0xada7c767UL, 0x43087275UL, 0x266fcecdUL, 0x707fad95UL, + 0x1518112dUL, 0xfbb7a43fUL, 0x9ed01887UL, 0x27e8cf1aUL, 0x428f73a2UL, + 0xac20c6b0UL, 0xc9477a08UL, 0x3eaf32a0UL, 0x5bc88e18UL, 0xb5673b0aUL, + 0xd00087b2UL, 0x6938502fUL, 0x0c5fec97UL, 0xe2f05985UL, 0x8797e53dUL, + 0xd1878665UL, 0xb4e03addUL, 0x5a4f8fcfUL, 0x3f283377UL, 0x8610e4eaUL, + 0xe3775852UL, 0x0dd8ed40UL, 0x68bf51f8UL, 0xa1f82bf0UL, 0xc49f9748UL, + 0x2a30225aUL, 0x4f579ee2UL, 0xf66f497fUL, 0x9308f5c7UL, 0x7da740d5UL, + 0x18c0fc6dUL, 0x4ed09f35UL, 0x2bb7238dUL, 0xc518969fUL, 0xa07f2a27UL, + 0x1947fdbaUL, 0x7c204102UL, 0x928ff410UL, 0xf7e848a8UL, 0x3d58149bUL, + 0x583fa823UL, 0xb6901d31UL, 0xd3f7a189UL, 0x6acf7614UL, 0x0fa8caacUL, + 0xe1077fbeUL, 0x8460c306UL, 0xd270a05eUL, 0xb7171ce6UL, 0x59b8a9f4UL, + 0x3cdf154cUL, 0x85e7c2d1UL, 0xe0807e69UL, 0x0e2fcb7bUL, 0x6b4877c3UL, + 0xa20f0dcbUL, 0xc768b173UL, 0x29c70461UL, 0x4ca0b8d9UL, 0xf5986f44UL, + 0x90ffd3fcUL, 0x7e5066eeUL, 0x1b37da56UL, 0x4d27b90eUL, 0x284005b6UL, + 0xc6efb0a4UL, 0xa3880c1cUL, 0x1ab0db81UL, 0x7fd76739UL, 0x9178d22bUL, + 0xf41f6e93UL, 0x03f7263bUL, 0x66909a83UL, 0x883f2f91UL, 0xed589329UL, + 0x546044b4UL, 0x3107f80cUL, 0xdfa84d1eUL, 0xbacff1a6UL, 0xecdf92feUL, + 0x89b82e46UL, 0x67179b54UL, 0x027027ecUL, 0xbb48f071UL, 0xde2f4cc9UL, + 0x3080f9dbUL, 0x55e74563UL, 0x9ca03f6bUL, 0xf9c783d3UL, 0x176836c1UL, + 0x720f8a79UL, 0xcb375de4UL, 0xae50e15cUL, 0x40ff544eUL, 0x2598e8f6UL, + 0x73888baeUL, 0x16ef3716UL, 0xf8408204UL, 0x9d273ebcUL, 0x241fe921UL, + 0x41785599UL, 0xafd7e08bUL, 0xcab05c33UL, 0x3bb659edUL, 0x5ed1e555UL, + 0xb07e5047UL, 0xd519ecffUL, 0x6c213b62UL, 0x094687daUL, 0xe7e932c8UL, + 0x828e8e70UL, 0xd49eed28UL, 0xb1f95190UL, 0x5f56e482UL, 0x3a31583aUL, + 0x83098fa7UL, 0xe66e331fUL, 0x08c1860dUL, 0x6da63ab5UL, 0xa4e140bdUL, + 0xc186fc05UL, 0x2f294917UL, 0x4a4ef5afUL, 0xf3762232UL, 0x96119e8aUL, + 0x78be2b98UL, 0x1dd99720UL, 0x4bc9f478UL, 0x2eae48c0UL, 0xc001fdd2UL, + 0xa566416aUL, 0x1c5e96f7UL, 0x79392a4fUL, 0x97969f5dUL, 0xf2f123e5UL, + 0x05196b4dUL, 0x607ed7f5UL, 0x8ed162e7UL, 0xebb6de5fUL, 0x528e09c2UL, + 0x37e9b57aUL, 0xd9460068UL, 0xbc21bcd0UL, 0xea31df88UL, 0x8f566330UL, + 0x61f9d622UL, 0x049e6a9aUL, 0xbda6bd07UL, 0xd8c101bfUL, 0x366eb4adUL, + 0x53090815UL, 0x9a4e721dUL, 0xff29cea5UL, 0x11867bb7UL, 0x74e1c70fUL, + 0xcdd91092UL, 0xa8beac2aUL, 0x46111938UL, 0x2376a580UL, 0x7566c6d8UL, + 0x10017a60UL, 0xfeaecf72UL, 0x9bc973caUL, 0x22f1a457UL, 0x479618efUL, + 0xa939adfdUL, 0xcc5e1145UL, 0x06ee4d76UL, 0x6389f1ceUL, 0x8d2644dcUL, + 0xe841f864UL, 0x51792ff9UL, 0x341e9341UL, 0xdab12653UL, 0xbfd69aebUL, + 0xe9c6f9b3UL, 0x8ca1450bUL, 0x620ef019UL, 0x07694ca1UL, 0xbe519b3cUL, + 0xdb362784UL, 0x35999296UL, 0x50fe2e2eUL, 0x99b95426UL, 0xfcdee89eUL, + 0x12715d8cUL, 0x7716e134UL, 0xce2e36a9UL, 0xab498a11UL, 0x45e63f03UL, + 0x208183bbUL, 0x7691e0e3UL, 0x13f65c5bUL, 0xfd59e949UL, 0x983e55f1UL, + 0x2106826cUL, 0x44613ed4UL, 0xaace8bc6UL, 0xcfa9377eUL, 0x38417fd6UL, + 0x5d26c36eUL, 0xb389767cUL, 0xd6eecac4UL, 0x6fd61d59UL, 0x0ab1a1e1UL, + 0xe41e14f3UL, 0x8179a84bUL, 0xd769cb13UL, 0xb20e77abUL, 0x5ca1c2b9UL, + 0x39c67e01UL, 0x80fea99cUL, 0xe5991524UL, 0x0b36a036UL, 0x6e511c8eUL, + 0xa7166686UL, 0xc271da3eUL, 0x2cde6f2cUL, 0x49b9d394UL, 0xf0810409UL, + 0x95e6b8b1UL, 0x7b490da3UL, 0x1e2eb11bUL, 0x483ed243UL, 0x2d596efbUL, + 0xc3f6dbe9UL, 0xa6916751UL, 0x1fa9b0ccUL, 0x7ace0c74UL, 0x9461b966UL, + 0xf10605deUL +#endif + } +}; diff --git a/software/scsi2sd-util/zlib-1.2.8/deflate.c b/software/scsi2sd-util/zlib-1.2.8/deflate.c new file mode 100644 index 0000000..6969577 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/deflate.c @@ -0,0 +1,1967 @@ +/* deflate.c -- compress data using the deflation algorithm + * Copyright (C) 1995-2013 Jean-loup Gailly and Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* + * ALGORITHM + * + * The "deflation" process depends on being able to identify portions + * of the input text which are identical to earlier input (within a + * sliding window trailing behind the input currently being processed). + * + * The most straightforward technique turns out to be the fastest for + * most input files: try all possible matches and select the longest. + * The key feature of this algorithm is that insertions into the string + * dictionary are very simple and thus fast, and deletions are avoided + * completely. Insertions are performed at each input character, whereas + * string matches are performed only when the previous match ends. So it + * is preferable to spend more time in matches to allow very fast string + * insertions and avoid deletions. The matching algorithm for small + * strings is inspired from that of Rabin & Karp. A brute force approach + * is used to find longer strings when a small match has been found. + * A similar algorithm is used in comic (by Jan-Mark Wams) and freeze + * (by Leonid Broukhis). + * A previous version of this file used a more sophisticated algorithm + * (by Fiala and Greene) which is guaranteed to run in linear amortized + * time, but has a larger average cost, uses more memory and is patented. + * However the F&G algorithm may be faster for some highly redundant + * files if the parameter max_chain_length (described below) is too large. + * + * ACKNOWLEDGEMENTS + * + * The idea of lazy evaluation of matches is due to Jan-Mark Wams, and + * I found it in 'freeze' written by Leonid Broukhis. + * Thanks to many people for bug reports and testing. + * + * REFERENCES + * + * Deutsch, L.P.,"DEFLATE Compressed Data Format Specification". + * Available in http://tools.ietf.org/html/rfc1951 + * + * A description of the Rabin and Karp algorithm is given in the book + * "Algorithms" by R. Sedgewick, Addison-Wesley, p252. + * + * Fiala,E.R., and Greene,D.H. + * Data Compression with Finite Windows, Comm.ACM, 32,4 (1989) 490-595 + * + */ + +/* @(#) $Id$ */ + +#include "deflate.h" + +const char deflate_copyright[] = + " deflate 1.2.8 Copyright 1995-2013 Jean-loup Gailly and Mark Adler "; +/* + If you use the zlib library in a product, an acknowledgment is welcome + in the documentation of your product. If for some reason you cannot + include such an acknowledgment, I would appreciate that you keep this + copyright string in the executable of your product. + */ + +/* =========================================================================== + * Function prototypes. + */ +typedef enum { + need_more, /* block not completed, need more input or more output */ + block_done, /* block flush performed */ + finish_started, /* finish started, need only more output at next deflate */ + finish_done /* finish done, accept no more input or output */ +} block_state; + +typedef block_state (*compress_func) OF((deflate_state *s, int flush)); +/* Compression function. Returns the block state after the call. */ + +local void fill_window OF((deflate_state *s)); +local block_state deflate_stored OF((deflate_state *s, int flush)); +local block_state deflate_fast OF((deflate_state *s, int flush)); +#ifndef FASTEST +local block_state deflate_slow OF((deflate_state *s, int flush)); +#endif +local block_state deflate_rle OF((deflate_state *s, int flush)); +local block_state deflate_huff OF((deflate_state *s, int flush)); +local void lm_init OF((deflate_state *s)); +local void putShortMSB OF((deflate_state *s, uInt b)); +local void flush_pending OF((z_streamp strm)); +local int read_buf OF((z_streamp strm, Bytef *buf, unsigned size)); +#ifdef ASMV + void match_init OF((void)); /* asm code initialization */ + uInt longest_match OF((deflate_state *s, IPos cur_match)); +#else +local uInt longest_match OF((deflate_state *s, IPos cur_match)); +#endif + +#ifdef DEBUG +local void check_match OF((deflate_state *s, IPos start, IPos match, + int length)); +#endif + +/* =========================================================================== + * Local data + */ + +#define NIL 0 +/* Tail of hash chains */ + +#ifndef TOO_FAR +# define TOO_FAR 4096 +#endif +/* Matches of length 3 are discarded if their distance exceeds TOO_FAR */ + +/* Values for max_lazy_match, good_match and max_chain_length, depending on + * the desired pack level (0..9). The values given below have been tuned to + * exclude worst case performance for pathological files. Better values may be + * found for specific files. + */ +typedef struct config_s { + ush good_length; /* reduce lazy search above this match length */ + ush max_lazy; /* do not perform lazy search above this match length */ + ush nice_length; /* quit search above this match length */ + ush max_chain; + compress_func func; +} config; + +#ifdef FASTEST +local const config configuration_table[2] = { +/* good lazy nice chain */ +/* 0 */ {0, 0, 0, 0, deflate_stored}, /* store only */ +/* 1 */ {4, 4, 8, 4, deflate_fast}}; /* max speed, no lazy matches */ +#else +local const config configuration_table[10] = { +/* good lazy nice chain */ +/* 0 */ {0, 0, 0, 0, deflate_stored}, /* store only */ +/* 1 */ {4, 4, 8, 4, deflate_fast}, /* max speed, no lazy matches */ +/* 2 */ {4, 5, 16, 8, deflate_fast}, +/* 3 */ {4, 6, 32, 32, deflate_fast}, + +/* 4 */ {4, 4, 16, 16, deflate_slow}, /* lazy matches */ +/* 5 */ {8, 16, 32, 32, deflate_slow}, +/* 6 */ {8, 16, 128, 128, deflate_slow}, +/* 7 */ {8, 32, 128, 256, deflate_slow}, +/* 8 */ {32, 128, 258, 1024, deflate_slow}, +/* 9 */ {32, 258, 258, 4096, deflate_slow}}; /* max compression */ +#endif + +/* Note: the deflate() code requires max_lazy >= MIN_MATCH and max_chain >= 4 + * For deflate_fast() (levels <= 3) good is ignored and lazy has a different + * meaning. + */ + +#define EQUAL 0 +/* result of memcmp for equal strings */ + +#ifndef NO_DUMMY_DECL +struct static_tree_desc_s {int dummy;}; /* for buggy compilers */ +#endif + +/* rank Z_BLOCK between Z_NO_FLUSH and Z_PARTIAL_FLUSH */ +#define RANK(f) (((f) << 1) - ((f) > 4 ? 9 : 0)) + +/* =========================================================================== + * Update a hash value with the given input byte + * IN assertion: all calls to to UPDATE_HASH are made with consecutive + * input characters, so that a running hash key can be computed from the + * previous key instead of complete recalculation each time. + */ +#define UPDATE_HASH(s,h,c) (h = (((h)<hash_shift) ^ (c)) & s->hash_mask) + + +/* =========================================================================== + * Insert string str in the dictionary and set match_head to the previous head + * of the hash chain (the most recent string with same hash key). Return + * the previous length of the hash chain. + * If this file is compiled with -DFASTEST, the compression level is forced + * to 1, and no hash chains are maintained. + * IN assertion: all calls to to INSERT_STRING are made with consecutive + * input characters and the first MIN_MATCH bytes of str are valid + * (except for the last MIN_MATCH-1 bytes of the input file). + */ +#ifdef FASTEST +#define INSERT_STRING(s, str, match_head) \ + (UPDATE_HASH(s, s->ins_h, s->window[(str) + (MIN_MATCH-1)]), \ + match_head = s->head[s->ins_h], \ + s->head[s->ins_h] = (Pos)(str)) +#else +#define INSERT_STRING(s, str, match_head) \ + (UPDATE_HASH(s, s->ins_h, s->window[(str) + (MIN_MATCH-1)]), \ + match_head = s->prev[(str) & s->w_mask] = s->head[s->ins_h], \ + s->head[s->ins_h] = (Pos)(str)) +#endif + +/* =========================================================================== + * Initialize the hash table (avoiding 64K overflow for 16 bit systems). + * prev[] will be initialized on the fly. + */ +#define CLEAR_HASH(s) \ + s->head[s->hash_size-1] = NIL; \ + zmemzero((Bytef *)s->head, (unsigned)(s->hash_size-1)*sizeof(*s->head)); + +/* ========================================================================= */ +int ZEXPORT deflateInit_(strm, level, version, stream_size) + z_streamp strm; + int level; + const char *version; + int stream_size; +{ + return deflateInit2_(strm, level, Z_DEFLATED, MAX_WBITS, DEF_MEM_LEVEL, + Z_DEFAULT_STRATEGY, version, stream_size); + /* To do: ignore strm->next_in if we use it as window */ +} + +/* ========================================================================= */ +int ZEXPORT deflateInit2_(strm, level, method, windowBits, memLevel, strategy, + version, stream_size) + z_streamp strm; + int level; + int method; + int windowBits; + int memLevel; + int strategy; + const char *version; + int stream_size; +{ + deflate_state *s; + int wrap = 1; + static const char my_version[] = ZLIB_VERSION; + + ushf *overlay; + /* We overlay pending_buf and d_buf+l_buf. This works since the average + * output size for (length,distance) codes is <= 24 bits. + */ + + if (version == Z_NULL || version[0] != my_version[0] || + stream_size != sizeof(z_stream)) { + return Z_VERSION_ERROR; + } + if (strm == Z_NULL) return Z_STREAM_ERROR; + + strm->msg = Z_NULL; + if (strm->zalloc == (alloc_func)0) { +#ifdef Z_SOLO + return Z_STREAM_ERROR; +#else + strm->zalloc = zcalloc; + strm->opaque = (voidpf)0; +#endif + } + if (strm->zfree == (free_func)0) +#ifdef Z_SOLO + return Z_STREAM_ERROR; +#else + strm->zfree = zcfree; +#endif + +#ifdef FASTEST + if (level != 0) level = 1; +#else + if (level == Z_DEFAULT_COMPRESSION) level = 6; +#endif + + if (windowBits < 0) { /* suppress zlib wrapper */ + wrap = 0; + windowBits = -windowBits; + } +#ifdef GZIP + else if (windowBits > 15) { + wrap = 2; /* write gzip wrapper instead */ + windowBits -= 16; + } +#endif + if (memLevel < 1 || memLevel > MAX_MEM_LEVEL || method != Z_DEFLATED || + windowBits < 8 || windowBits > 15 || level < 0 || level > 9 || + strategy < 0 || strategy > Z_FIXED) { + return Z_STREAM_ERROR; + } + if (windowBits == 8) windowBits = 9; /* until 256-byte window bug fixed */ + s = (deflate_state *) ZALLOC(strm, 1, sizeof(deflate_state)); + if (s == Z_NULL) return Z_MEM_ERROR; + strm->state = (struct internal_state FAR *)s; + s->strm = strm; + + s->wrap = wrap; + s->gzhead = Z_NULL; + s->w_bits = windowBits; + s->w_size = 1 << s->w_bits; + s->w_mask = s->w_size - 1; + + s->hash_bits = memLevel + 7; + s->hash_size = 1 << s->hash_bits; + s->hash_mask = s->hash_size - 1; + s->hash_shift = ((s->hash_bits+MIN_MATCH-1)/MIN_MATCH); + + s->window = (Bytef *) ZALLOC(strm, s->w_size, 2*sizeof(Byte)); + s->prev = (Posf *) ZALLOC(strm, s->w_size, sizeof(Pos)); + s->head = (Posf *) ZALLOC(strm, s->hash_size, sizeof(Pos)); + + s->high_water = 0; /* nothing written to s->window yet */ + + s->lit_bufsize = 1 << (memLevel + 6); /* 16K elements by default */ + + overlay = (ushf *) ZALLOC(strm, s->lit_bufsize, sizeof(ush)+2); + s->pending_buf = (uchf *) overlay; + s->pending_buf_size = (ulg)s->lit_bufsize * (sizeof(ush)+2L); + + if (s->window == Z_NULL || s->prev == Z_NULL || s->head == Z_NULL || + s->pending_buf == Z_NULL) { + s->status = FINISH_STATE; + strm->msg = ERR_MSG(Z_MEM_ERROR); + deflateEnd (strm); + return Z_MEM_ERROR; + } + s->d_buf = overlay + s->lit_bufsize/sizeof(ush); + s->l_buf = s->pending_buf + (1+sizeof(ush))*s->lit_bufsize; + + s->level = level; + s->strategy = strategy; + s->method = (Byte)method; + + return deflateReset(strm); +} + +/* ========================================================================= */ +int ZEXPORT deflateSetDictionary (strm, dictionary, dictLength) + z_streamp strm; + const Bytef *dictionary; + uInt dictLength; +{ + deflate_state *s; + uInt str, n; + int wrap; + unsigned avail; + z_const unsigned char *next; + + if (strm == Z_NULL || strm->state == Z_NULL || dictionary == Z_NULL) + return Z_STREAM_ERROR; + s = strm->state; + wrap = s->wrap; + if (wrap == 2 || (wrap == 1 && s->status != INIT_STATE) || s->lookahead) + return Z_STREAM_ERROR; + + /* when using zlib wrappers, compute Adler-32 for provided dictionary */ + if (wrap == 1) + strm->adler = adler32(strm->adler, dictionary, dictLength); + s->wrap = 0; /* avoid computing Adler-32 in read_buf */ + + /* if dictionary would fill window, just replace the history */ + if (dictLength >= s->w_size) { + if (wrap == 0) { /* already empty otherwise */ + CLEAR_HASH(s); + s->strstart = 0; + s->block_start = 0L; + s->insert = 0; + } + dictionary += dictLength - s->w_size; /* use the tail */ + dictLength = s->w_size; + } + + /* insert dictionary into window and hash */ + avail = strm->avail_in; + next = strm->next_in; + strm->avail_in = dictLength; + strm->next_in = (z_const Bytef *)dictionary; + fill_window(s); + while (s->lookahead >= MIN_MATCH) { + str = s->strstart; + n = s->lookahead - (MIN_MATCH-1); + do { + UPDATE_HASH(s, s->ins_h, s->window[str + MIN_MATCH-1]); +#ifndef FASTEST + s->prev[str & s->w_mask] = s->head[s->ins_h]; +#endif + s->head[s->ins_h] = (Pos)str; + str++; + } while (--n); + s->strstart = str; + s->lookahead = MIN_MATCH-1; + fill_window(s); + } + s->strstart += s->lookahead; + s->block_start = (long)s->strstart; + s->insert = s->lookahead; + s->lookahead = 0; + s->match_length = s->prev_length = MIN_MATCH-1; + s->match_available = 0; + strm->next_in = next; + strm->avail_in = avail; + s->wrap = wrap; + return Z_OK; +} + +/* ========================================================================= */ +int ZEXPORT deflateResetKeep (strm) + z_streamp strm; +{ + deflate_state *s; + + if (strm == Z_NULL || strm->state == Z_NULL || + strm->zalloc == (alloc_func)0 || strm->zfree == (free_func)0) { + return Z_STREAM_ERROR; + } + + strm->total_in = strm->total_out = 0; + strm->msg = Z_NULL; /* use zfree if we ever allocate msg dynamically */ + strm->data_type = Z_UNKNOWN; + + s = (deflate_state *)strm->state; + s->pending = 0; + s->pending_out = s->pending_buf; + + if (s->wrap < 0) { + s->wrap = -s->wrap; /* was made negative by deflate(..., Z_FINISH); */ + } + s->status = s->wrap ? INIT_STATE : BUSY_STATE; + strm->adler = +#ifdef GZIP + s->wrap == 2 ? crc32(0L, Z_NULL, 0) : +#endif + adler32(0L, Z_NULL, 0); + s->last_flush = Z_NO_FLUSH; + + _tr_init(s); + + return Z_OK; +} + +/* ========================================================================= */ +int ZEXPORT deflateReset (strm) + z_streamp strm; +{ + int ret; + + ret = deflateResetKeep(strm); + if (ret == Z_OK) + lm_init(strm->state); + return ret; +} + +/* ========================================================================= */ +int ZEXPORT deflateSetHeader (strm, head) + z_streamp strm; + gz_headerp head; +{ + if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; + if (strm->state->wrap != 2) return Z_STREAM_ERROR; + strm->state->gzhead = head; + return Z_OK; +} + +/* ========================================================================= */ +int ZEXPORT deflatePending (strm, pending, bits) + unsigned *pending; + int *bits; + z_streamp strm; +{ + if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; + if (pending != Z_NULL) + *pending = strm->state->pending; + if (bits != Z_NULL) + *bits = strm->state->bi_valid; + return Z_OK; +} + +/* ========================================================================= */ +int ZEXPORT deflatePrime (strm, bits, value) + z_streamp strm; + int bits; + int value; +{ + deflate_state *s; + int put; + + if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; + s = strm->state; + if ((Bytef *)(s->d_buf) < s->pending_out + ((Buf_size + 7) >> 3)) + return Z_BUF_ERROR; + do { + put = Buf_size - s->bi_valid; + if (put > bits) + put = bits; + s->bi_buf |= (ush)((value & ((1 << put) - 1)) << s->bi_valid); + s->bi_valid += put; + _tr_flush_bits(s); + value >>= put; + bits -= put; + } while (bits); + return Z_OK; +} + +/* ========================================================================= */ +int ZEXPORT deflateParams(strm, level, strategy) + z_streamp strm; + int level; + int strategy; +{ + deflate_state *s; + compress_func func; + int err = Z_OK; + + if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; + s = strm->state; + +#ifdef FASTEST + if (level != 0) level = 1; +#else + if (level == Z_DEFAULT_COMPRESSION) level = 6; +#endif + if (level < 0 || level > 9 || strategy < 0 || strategy > Z_FIXED) { + return Z_STREAM_ERROR; + } + func = configuration_table[s->level].func; + + if ((strategy != s->strategy || func != configuration_table[level].func) && + strm->total_in != 0) { + /* Flush the last buffer: */ + err = deflate(strm, Z_BLOCK); + if (err == Z_BUF_ERROR && s->pending == 0) + err = Z_OK; + } + if (s->level != level) { + s->level = level; + s->max_lazy_match = configuration_table[level].max_lazy; + s->good_match = configuration_table[level].good_length; + s->nice_match = configuration_table[level].nice_length; + s->max_chain_length = configuration_table[level].max_chain; + } + s->strategy = strategy; + return err; +} + +/* ========================================================================= */ +int ZEXPORT deflateTune(strm, good_length, max_lazy, nice_length, max_chain) + z_streamp strm; + int good_length; + int max_lazy; + int nice_length; + int max_chain; +{ + deflate_state *s; + + if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; + s = strm->state; + s->good_match = good_length; + s->max_lazy_match = max_lazy; + s->nice_match = nice_length; + s->max_chain_length = max_chain; + return Z_OK; +} + +/* ========================================================================= + * For the default windowBits of 15 and memLevel of 8, this function returns + * a close to exact, as well as small, upper bound on the compressed size. + * They are coded as constants here for a reason--if the #define's are + * changed, then this function needs to be changed as well. The return + * value for 15 and 8 only works for those exact settings. + * + * For any setting other than those defaults for windowBits and memLevel, + * the value returned is a conservative worst case for the maximum expansion + * resulting from using fixed blocks instead of stored blocks, which deflate + * can emit on compressed data for some combinations of the parameters. + * + * This function could be more sophisticated to provide closer upper bounds for + * every combination of windowBits and memLevel. But even the conservative + * upper bound of about 14% expansion does not seem onerous for output buffer + * allocation. + */ +uLong ZEXPORT deflateBound(strm, sourceLen) + z_streamp strm; + uLong sourceLen; +{ + deflate_state *s; + uLong complen, wraplen; + Bytef *str; + + /* conservative upper bound for compressed data */ + complen = sourceLen + + ((sourceLen + 7) >> 3) + ((sourceLen + 63) >> 6) + 5; + + /* if can't get parameters, return conservative bound plus zlib wrapper */ + if (strm == Z_NULL || strm->state == Z_NULL) + return complen + 6; + + /* compute wrapper length */ + s = strm->state; + switch (s->wrap) { + case 0: /* raw deflate */ + wraplen = 0; + break; + case 1: /* zlib wrapper */ + wraplen = 6 + (s->strstart ? 4 : 0); + break; + case 2: /* gzip wrapper */ + wraplen = 18; + if (s->gzhead != Z_NULL) { /* user-supplied gzip header */ + if (s->gzhead->extra != Z_NULL) + wraplen += 2 + s->gzhead->extra_len; + str = s->gzhead->name; + if (str != Z_NULL) + do { + wraplen++; + } while (*str++); + str = s->gzhead->comment; + if (str != Z_NULL) + do { + wraplen++; + } while (*str++); + if (s->gzhead->hcrc) + wraplen += 2; + } + break; + default: /* for compiler happiness */ + wraplen = 6; + } + + /* if not default parameters, return conservative bound */ + if (s->w_bits != 15 || s->hash_bits != 8 + 7) + return complen + wraplen; + + /* default settings: return tight bound for that case */ + return sourceLen + (sourceLen >> 12) + (sourceLen >> 14) + + (sourceLen >> 25) + 13 - 6 + wraplen; +} + +/* ========================================================================= + * Put a short in the pending buffer. The 16-bit value is put in MSB order. + * IN assertion: the stream state is correct and there is enough room in + * pending_buf. + */ +local void putShortMSB (s, b) + deflate_state *s; + uInt b; +{ + put_byte(s, (Byte)(b >> 8)); + put_byte(s, (Byte)(b & 0xff)); +} + +/* ========================================================================= + * Flush as much pending output as possible. All deflate() output goes + * through this function so some applications may wish to modify it + * to avoid allocating a large strm->next_out buffer and copying into it. + * (See also read_buf()). + */ +local void flush_pending(strm) + z_streamp strm; +{ + unsigned len; + deflate_state *s = strm->state; + + _tr_flush_bits(s); + len = s->pending; + if (len > strm->avail_out) len = strm->avail_out; + if (len == 0) return; + + zmemcpy(strm->next_out, s->pending_out, len); + strm->next_out += len; + s->pending_out += len; + strm->total_out += len; + strm->avail_out -= len; + s->pending -= len; + if (s->pending == 0) { + s->pending_out = s->pending_buf; + } +} + +/* ========================================================================= */ +int ZEXPORT deflate (strm, flush) + z_streamp strm; + int flush; +{ + int old_flush; /* value of flush param for previous deflate call */ + deflate_state *s; + + if (strm == Z_NULL || strm->state == Z_NULL || + flush > Z_BLOCK || flush < 0) { + return Z_STREAM_ERROR; + } + s = strm->state; + + if (strm->next_out == Z_NULL || + (strm->next_in == Z_NULL && strm->avail_in != 0) || + (s->status == FINISH_STATE && flush != Z_FINISH)) { + ERR_RETURN(strm, Z_STREAM_ERROR); + } + if (strm->avail_out == 0) ERR_RETURN(strm, Z_BUF_ERROR); + + s->strm = strm; /* just in case */ + old_flush = s->last_flush; + s->last_flush = flush; + + /* Write the header */ + if (s->status == INIT_STATE) { +#ifdef GZIP + if (s->wrap == 2) { + strm->adler = crc32(0L, Z_NULL, 0); + put_byte(s, 31); + put_byte(s, 139); + put_byte(s, 8); + if (s->gzhead == Z_NULL) { + put_byte(s, 0); + put_byte(s, 0); + put_byte(s, 0); + put_byte(s, 0); + put_byte(s, 0); + put_byte(s, s->level == 9 ? 2 : + (s->strategy >= Z_HUFFMAN_ONLY || s->level < 2 ? + 4 : 0)); + put_byte(s, OS_CODE); + s->status = BUSY_STATE; + } + else { + put_byte(s, (s->gzhead->text ? 1 : 0) + + (s->gzhead->hcrc ? 2 : 0) + + (s->gzhead->extra == Z_NULL ? 0 : 4) + + (s->gzhead->name == Z_NULL ? 0 : 8) + + (s->gzhead->comment == Z_NULL ? 0 : 16) + ); + put_byte(s, (Byte)(s->gzhead->time & 0xff)); + put_byte(s, (Byte)((s->gzhead->time >> 8) & 0xff)); + put_byte(s, (Byte)((s->gzhead->time >> 16) & 0xff)); + put_byte(s, (Byte)((s->gzhead->time >> 24) & 0xff)); + put_byte(s, s->level == 9 ? 2 : + (s->strategy >= Z_HUFFMAN_ONLY || s->level < 2 ? + 4 : 0)); + put_byte(s, s->gzhead->os & 0xff); + if (s->gzhead->extra != Z_NULL) { + put_byte(s, s->gzhead->extra_len & 0xff); + put_byte(s, (s->gzhead->extra_len >> 8) & 0xff); + } + if (s->gzhead->hcrc) + strm->adler = crc32(strm->adler, s->pending_buf, + s->pending); + s->gzindex = 0; + s->status = EXTRA_STATE; + } + } + else +#endif + { + uInt header = (Z_DEFLATED + ((s->w_bits-8)<<4)) << 8; + uInt level_flags; + + if (s->strategy >= Z_HUFFMAN_ONLY || s->level < 2) + level_flags = 0; + else if (s->level < 6) + level_flags = 1; + else if (s->level == 6) + level_flags = 2; + else + level_flags = 3; + header |= (level_flags << 6); + if (s->strstart != 0) header |= PRESET_DICT; + header += 31 - (header % 31); + + s->status = BUSY_STATE; + putShortMSB(s, header); + + /* Save the adler32 of the preset dictionary: */ + if (s->strstart != 0) { + putShortMSB(s, (uInt)(strm->adler >> 16)); + putShortMSB(s, (uInt)(strm->adler & 0xffff)); + } + strm->adler = adler32(0L, Z_NULL, 0); + } + } +#ifdef GZIP + if (s->status == EXTRA_STATE) { + if (s->gzhead->extra != Z_NULL) { + uInt beg = s->pending; /* start of bytes to update crc */ + + while (s->gzindex < (s->gzhead->extra_len & 0xffff)) { + if (s->pending == s->pending_buf_size) { + if (s->gzhead->hcrc && s->pending > beg) + strm->adler = crc32(strm->adler, s->pending_buf + beg, + s->pending - beg); + flush_pending(strm); + beg = s->pending; + if (s->pending == s->pending_buf_size) + break; + } + put_byte(s, s->gzhead->extra[s->gzindex]); + s->gzindex++; + } + if (s->gzhead->hcrc && s->pending > beg) + strm->adler = crc32(strm->adler, s->pending_buf + beg, + s->pending - beg); + if (s->gzindex == s->gzhead->extra_len) { + s->gzindex = 0; + s->status = NAME_STATE; + } + } + else + s->status = NAME_STATE; + } + if (s->status == NAME_STATE) { + if (s->gzhead->name != Z_NULL) { + uInt beg = s->pending; /* start of bytes to update crc */ + int val; + + do { + if (s->pending == s->pending_buf_size) { + if (s->gzhead->hcrc && s->pending > beg) + strm->adler = crc32(strm->adler, s->pending_buf + beg, + s->pending - beg); + flush_pending(strm); + beg = s->pending; + if (s->pending == s->pending_buf_size) { + val = 1; + break; + } + } + val = s->gzhead->name[s->gzindex++]; + put_byte(s, val); + } while (val != 0); + if (s->gzhead->hcrc && s->pending > beg) + strm->adler = crc32(strm->adler, s->pending_buf + beg, + s->pending - beg); + if (val == 0) { + s->gzindex = 0; + s->status = COMMENT_STATE; + } + } + else + s->status = COMMENT_STATE; + } + if (s->status == COMMENT_STATE) { + if (s->gzhead->comment != Z_NULL) { + uInt beg = s->pending; /* start of bytes to update crc */ + int val; + + do { + if (s->pending == s->pending_buf_size) { + if (s->gzhead->hcrc && s->pending > beg) + strm->adler = crc32(strm->adler, s->pending_buf + beg, + s->pending - beg); + flush_pending(strm); + beg = s->pending; + if (s->pending == s->pending_buf_size) { + val = 1; + break; + } + } + val = s->gzhead->comment[s->gzindex++]; + put_byte(s, val); + } while (val != 0); + if (s->gzhead->hcrc && s->pending > beg) + strm->adler = crc32(strm->adler, s->pending_buf + beg, + s->pending - beg); + if (val == 0) + s->status = HCRC_STATE; + } + else + s->status = HCRC_STATE; + } + if (s->status == HCRC_STATE) { + if (s->gzhead->hcrc) { + if (s->pending + 2 > s->pending_buf_size) + flush_pending(strm); + if (s->pending + 2 <= s->pending_buf_size) { + put_byte(s, (Byte)(strm->adler & 0xff)); + put_byte(s, (Byte)((strm->adler >> 8) & 0xff)); + strm->adler = crc32(0L, Z_NULL, 0); + s->status = BUSY_STATE; + } + } + else + s->status = BUSY_STATE; + } +#endif + + /* Flush as much pending output as possible */ + if (s->pending != 0) { + flush_pending(strm); + if (strm->avail_out == 0) { + /* Since avail_out is 0, deflate will be called again with + * more output space, but possibly with both pending and + * avail_in equal to zero. There won't be anything to do, + * but this is not an error situation so make sure we + * return OK instead of BUF_ERROR at next call of deflate: + */ + s->last_flush = -1; + return Z_OK; + } + + /* Make sure there is something to do and avoid duplicate consecutive + * flushes. For repeated and useless calls with Z_FINISH, we keep + * returning Z_STREAM_END instead of Z_BUF_ERROR. + */ + } else if (strm->avail_in == 0 && RANK(flush) <= RANK(old_flush) && + flush != Z_FINISH) { + ERR_RETURN(strm, Z_BUF_ERROR); + } + + /* User must not provide more input after the first FINISH: */ + if (s->status == FINISH_STATE && strm->avail_in != 0) { + ERR_RETURN(strm, Z_BUF_ERROR); + } + + /* Start a new block or continue the current one. + */ + if (strm->avail_in != 0 || s->lookahead != 0 || + (flush != Z_NO_FLUSH && s->status != FINISH_STATE)) { + block_state bstate; + + bstate = s->strategy == Z_HUFFMAN_ONLY ? deflate_huff(s, flush) : + (s->strategy == Z_RLE ? deflate_rle(s, flush) : + (*(configuration_table[s->level].func))(s, flush)); + + if (bstate == finish_started || bstate == finish_done) { + s->status = FINISH_STATE; + } + if (bstate == need_more || bstate == finish_started) { + if (strm->avail_out == 0) { + s->last_flush = -1; /* avoid BUF_ERROR next call, see above */ + } + return Z_OK; + /* If flush != Z_NO_FLUSH && avail_out == 0, the next call + * of deflate should use the same flush parameter to make sure + * that the flush is complete. So we don't have to output an + * empty block here, this will be done at next call. This also + * ensures that for a very small output buffer, we emit at most + * one empty block. + */ + } + if (bstate == block_done) { + if (flush == Z_PARTIAL_FLUSH) { + _tr_align(s); + } else if (flush != Z_BLOCK) { /* FULL_FLUSH or SYNC_FLUSH */ + _tr_stored_block(s, (char*)0, 0L, 0); + /* For a full flush, this empty block will be recognized + * as a special marker by inflate_sync(). + */ + if (flush == Z_FULL_FLUSH) { + CLEAR_HASH(s); /* forget history */ + if (s->lookahead == 0) { + s->strstart = 0; + s->block_start = 0L; + s->insert = 0; + } + } + } + flush_pending(strm); + if (strm->avail_out == 0) { + s->last_flush = -1; /* avoid BUF_ERROR at next call, see above */ + return Z_OK; + } + } + } + Assert(strm->avail_out > 0, "bug2"); + + if (flush != Z_FINISH) return Z_OK; + if (s->wrap <= 0) return Z_STREAM_END; + + /* Write the trailer */ +#ifdef GZIP + if (s->wrap == 2) { + put_byte(s, (Byte)(strm->adler & 0xff)); + put_byte(s, (Byte)((strm->adler >> 8) & 0xff)); + put_byte(s, (Byte)((strm->adler >> 16) & 0xff)); + put_byte(s, (Byte)((strm->adler >> 24) & 0xff)); + put_byte(s, (Byte)(strm->total_in & 0xff)); + put_byte(s, (Byte)((strm->total_in >> 8) & 0xff)); + put_byte(s, (Byte)((strm->total_in >> 16) & 0xff)); + put_byte(s, (Byte)((strm->total_in >> 24) & 0xff)); + } + else +#endif + { + putShortMSB(s, (uInt)(strm->adler >> 16)); + putShortMSB(s, (uInt)(strm->adler & 0xffff)); + } + flush_pending(strm); + /* If avail_out is zero, the application will call deflate again + * to flush the rest. + */ + if (s->wrap > 0) s->wrap = -s->wrap; /* write the trailer only once! */ + return s->pending != 0 ? Z_OK : Z_STREAM_END; +} + +/* ========================================================================= */ +int ZEXPORT deflateEnd (strm) + z_streamp strm; +{ + int status; + + if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; + + status = strm->state->status; + if (status != INIT_STATE && + status != EXTRA_STATE && + status != NAME_STATE && + status != COMMENT_STATE && + status != HCRC_STATE && + status != BUSY_STATE && + status != FINISH_STATE) { + return Z_STREAM_ERROR; + } + + /* Deallocate in reverse order of allocations: */ + TRY_FREE(strm, strm->state->pending_buf); + TRY_FREE(strm, strm->state->head); + TRY_FREE(strm, strm->state->prev); + TRY_FREE(strm, strm->state->window); + + ZFREE(strm, strm->state); + strm->state = Z_NULL; + + return status == BUSY_STATE ? Z_DATA_ERROR : Z_OK; +} + +/* ========================================================================= + * Copy the source state to the destination state. + * To simplify the source, this is not supported for 16-bit MSDOS (which + * doesn't have enough memory anyway to duplicate compression states). + */ +int ZEXPORT deflateCopy (dest, source) + z_streamp dest; + z_streamp source; +{ +#ifdef MAXSEG_64K + return Z_STREAM_ERROR; +#else + deflate_state *ds; + deflate_state *ss; + ushf *overlay; + + + if (source == Z_NULL || dest == Z_NULL || source->state == Z_NULL) { + return Z_STREAM_ERROR; + } + + ss = source->state; + + zmemcpy((voidpf)dest, (voidpf)source, sizeof(z_stream)); + + ds = (deflate_state *) ZALLOC(dest, 1, sizeof(deflate_state)); + if (ds == Z_NULL) return Z_MEM_ERROR; + dest->state = (struct internal_state FAR *) ds; + zmemcpy((voidpf)ds, (voidpf)ss, sizeof(deflate_state)); + ds->strm = dest; + + ds->window = (Bytef *) ZALLOC(dest, ds->w_size, 2*sizeof(Byte)); + ds->prev = (Posf *) ZALLOC(dest, ds->w_size, sizeof(Pos)); + ds->head = (Posf *) ZALLOC(dest, ds->hash_size, sizeof(Pos)); + overlay = (ushf *) ZALLOC(dest, ds->lit_bufsize, sizeof(ush)+2); + ds->pending_buf = (uchf *) overlay; + + if (ds->window == Z_NULL || ds->prev == Z_NULL || ds->head == Z_NULL || + ds->pending_buf == Z_NULL) { + deflateEnd (dest); + return Z_MEM_ERROR; + } + /* following zmemcpy do not work for 16-bit MSDOS */ + zmemcpy(ds->window, ss->window, ds->w_size * 2 * sizeof(Byte)); + zmemcpy((voidpf)ds->prev, (voidpf)ss->prev, ds->w_size * sizeof(Pos)); + zmemcpy((voidpf)ds->head, (voidpf)ss->head, ds->hash_size * sizeof(Pos)); + zmemcpy(ds->pending_buf, ss->pending_buf, (uInt)ds->pending_buf_size); + + ds->pending_out = ds->pending_buf + (ss->pending_out - ss->pending_buf); + ds->d_buf = overlay + ds->lit_bufsize/sizeof(ush); + ds->l_buf = ds->pending_buf + (1+sizeof(ush))*ds->lit_bufsize; + + ds->l_desc.dyn_tree = ds->dyn_ltree; + ds->d_desc.dyn_tree = ds->dyn_dtree; + ds->bl_desc.dyn_tree = ds->bl_tree; + + return Z_OK; +#endif /* MAXSEG_64K */ +} + +/* =========================================================================== + * Read a new buffer from the current input stream, update the adler32 + * and total number of bytes read. All deflate() input goes through + * this function so some applications may wish to modify it to avoid + * allocating a large strm->next_in buffer and copying from it. + * (See also flush_pending()). + */ +local int read_buf(strm, buf, size) + z_streamp strm; + Bytef *buf; + unsigned size; +{ + unsigned len = strm->avail_in; + + if (len > size) len = size; + if (len == 0) return 0; + + strm->avail_in -= len; + + zmemcpy(buf, strm->next_in, len); + if (strm->state->wrap == 1) { + strm->adler = adler32(strm->adler, buf, len); + } +#ifdef GZIP + else if (strm->state->wrap == 2) { + strm->adler = crc32(strm->adler, buf, len); + } +#endif + strm->next_in += len; + strm->total_in += len; + + return (int)len; +} + +/* =========================================================================== + * Initialize the "longest match" routines for a new zlib stream + */ +local void lm_init (s) + deflate_state *s; +{ + s->window_size = (ulg)2L*s->w_size; + + CLEAR_HASH(s); + + /* Set the default configuration parameters: + */ + s->max_lazy_match = configuration_table[s->level].max_lazy; + s->good_match = configuration_table[s->level].good_length; + s->nice_match = configuration_table[s->level].nice_length; + s->max_chain_length = configuration_table[s->level].max_chain; + + s->strstart = 0; + s->block_start = 0L; + s->lookahead = 0; + s->insert = 0; + s->match_length = s->prev_length = MIN_MATCH-1; + s->match_available = 0; + s->ins_h = 0; +#ifndef FASTEST +#ifdef ASMV + match_init(); /* initialize the asm code */ +#endif +#endif +} + +#ifndef FASTEST +/* =========================================================================== + * Set match_start to the longest match starting at the given string and + * return its length. Matches shorter or equal to prev_length are discarded, + * in which case the result is equal to prev_length and match_start is + * garbage. + * IN assertions: cur_match is the head of the hash chain for the current + * string (strstart) and its distance is <= MAX_DIST, and prev_length >= 1 + * OUT assertion: the match length is not greater than s->lookahead. + */ +#ifndef ASMV +/* For 80x86 and 680x0, an optimized version will be provided in match.asm or + * match.S. The code will be functionally equivalent. + */ +local uInt longest_match(s, cur_match) + deflate_state *s; + IPos cur_match; /* current match */ +{ + unsigned chain_length = s->max_chain_length;/* max hash chain length */ + register Bytef *scan = s->window + s->strstart; /* current string */ + register Bytef *match; /* matched string */ + register int len; /* length of current match */ + int best_len = s->prev_length; /* best match length so far */ + int nice_match = s->nice_match; /* stop if match long enough */ + IPos limit = s->strstart > (IPos)MAX_DIST(s) ? + s->strstart - (IPos)MAX_DIST(s) : NIL; + /* Stop when cur_match becomes <= limit. To simplify the code, + * we prevent matches with the string of window index 0. + */ + Posf *prev = s->prev; + uInt wmask = s->w_mask; + +#ifdef UNALIGNED_OK + /* Compare two bytes at a time. Note: this is not always beneficial. + * Try with and without -DUNALIGNED_OK to check. + */ + register Bytef *strend = s->window + s->strstart + MAX_MATCH - 1; + register ush scan_start = *(ushf*)scan; + register ush scan_end = *(ushf*)(scan+best_len-1); +#else + register Bytef *strend = s->window + s->strstart + MAX_MATCH; + register Byte scan_end1 = scan[best_len-1]; + register Byte scan_end = scan[best_len]; +#endif + + /* The code is optimized for HASH_BITS >= 8 and MAX_MATCH-2 multiple of 16. + * It is easy to get rid of this optimization if necessary. + */ + Assert(s->hash_bits >= 8 && MAX_MATCH == 258, "Code too clever"); + + /* Do not waste too much time if we already have a good match: */ + if (s->prev_length >= s->good_match) { + chain_length >>= 2; + } + /* Do not look for matches beyond the end of the input. This is necessary + * to make deflate deterministic. + */ + if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead; + + Assert((ulg)s->strstart <= s->window_size-MIN_LOOKAHEAD, "need lookahead"); + + do { + Assert(cur_match < s->strstart, "no future"); + match = s->window + cur_match; + + /* Skip to next match if the match length cannot increase + * or if the match length is less than 2. Note that the checks below + * for insufficient lookahead only occur occasionally for performance + * reasons. Therefore uninitialized memory will be accessed, and + * conditional jumps will be made that depend on those values. + * However the length of the match is limited to the lookahead, so + * the output of deflate is not affected by the uninitialized values. + */ +#if (defined(UNALIGNED_OK) && MAX_MATCH == 258) + /* This code assumes sizeof(unsigned short) == 2. Do not use + * UNALIGNED_OK if your compiler uses a different size. + */ + if (*(ushf*)(match+best_len-1) != scan_end || + *(ushf*)match != scan_start) continue; + + /* It is not necessary to compare scan[2] and match[2] since they are + * always equal when the other bytes match, given that the hash keys + * are equal and that HASH_BITS >= 8. Compare 2 bytes at a time at + * strstart+3, +5, ... up to strstart+257. We check for insufficient + * lookahead only every 4th comparison; the 128th check will be made + * at strstart+257. If MAX_MATCH-2 is not a multiple of 8, it is + * necessary to put more guard bytes at the end of the window, or + * to check more often for insufficient lookahead. + */ + Assert(scan[2] == match[2], "scan[2]?"); + scan++, match++; + do { + } while (*(ushf*)(scan+=2) == *(ushf*)(match+=2) && + *(ushf*)(scan+=2) == *(ushf*)(match+=2) && + *(ushf*)(scan+=2) == *(ushf*)(match+=2) && + *(ushf*)(scan+=2) == *(ushf*)(match+=2) && + scan < strend); + /* The funny "do {}" generates better code on most compilers */ + + /* Here, scan <= window+strstart+257 */ + Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan"); + if (*scan == *match) scan++; + + len = (MAX_MATCH - 1) - (int)(strend-scan); + scan = strend - (MAX_MATCH-1); + +#else /* UNALIGNED_OK */ + + if (match[best_len] != scan_end || + match[best_len-1] != scan_end1 || + *match != *scan || + *++match != scan[1]) continue; + + /* The check at best_len-1 can be removed because it will be made + * again later. (This heuristic is not always a win.) + * It is not necessary to compare scan[2] and match[2] since they + * are always equal when the other bytes match, given that + * the hash keys are equal and that HASH_BITS >= 8. + */ + scan += 2, match++; + Assert(*scan == *match, "match[2]?"); + + /* We check for insufficient lookahead only every 8th comparison; + * the 256th check will be made at strstart+258. + */ + do { + } while (*++scan == *++match && *++scan == *++match && + *++scan == *++match && *++scan == *++match && + *++scan == *++match && *++scan == *++match && + *++scan == *++match && *++scan == *++match && + scan < strend); + + Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan"); + + len = MAX_MATCH - (int)(strend - scan); + scan = strend - MAX_MATCH; + +#endif /* UNALIGNED_OK */ + + if (len > best_len) { + s->match_start = cur_match; + best_len = len; + if (len >= nice_match) break; +#ifdef UNALIGNED_OK + scan_end = *(ushf*)(scan+best_len-1); +#else + scan_end1 = scan[best_len-1]; + scan_end = scan[best_len]; +#endif + } + } while ((cur_match = prev[cur_match & wmask]) > limit + && --chain_length != 0); + + if ((uInt)best_len <= s->lookahead) return (uInt)best_len; + return s->lookahead; +} +#endif /* ASMV */ + +#else /* FASTEST */ + +/* --------------------------------------------------------------------------- + * Optimized version for FASTEST only + */ +local uInt longest_match(s, cur_match) + deflate_state *s; + IPos cur_match; /* current match */ +{ + register Bytef *scan = s->window + s->strstart; /* current string */ + register Bytef *match; /* matched string */ + register int len; /* length of current match */ + register Bytef *strend = s->window + s->strstart + MAX_MATCH; + + /* The code is optimized for HASH_BITS >= 8 and MAX_MATCH-2 multiple of 16. + * It is easy to get rid of this optimization if necessary. + */ + Assert(s->hash_bits >= 8 && MAX_MATCH == 258, "Code too clever"); + + Assert((ulg)s->strstart <= s->window_size-MIN_LOOKAHEAD, "need lookahead"); + + Assert(cur_match < s->strstart, "no future"); + + match = s->window + cur_match; + + /* Return failure if the match length is less than 2: + */ + if (match[0] != scan[0] || match[1] != scan[1]) return MIN_MATCH-1; + + /* The check at best_len-1 can be removed because it will be made + * again later. (This heuristic is not always a win.) + * It is not necessary to compare scan[2] and match[2] since they + * are always equal when the other bytes match, given that + * the hash keys are equal and that HASH_BITS >= 8. + */ + scan += 2, match += 2; + Assert(*scan == *match, "match[2]?"); + + /* We check for insufficient lookahead only every 8th comparison; + * the 256th check will be made at strstart+258. + */ + do { + } while (*++scan == *++match && *++scan == *++match && + *++scan == *++match && *++scan == *++match && + *++scan == *++match && *++scan == *++match && + *++scan == *++match && *++scan == *++match && + scan < strend); + + Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan"); + + len = MAX_MATCH - (int)(strend - scan); + + if (len < MIN_MATCH) return MIN_MATCH - 1; + + s->match_start = cur_match; + return (uInt)len <= s->lookahead ? (uInt)len : s->lookahead; +} + +#endif /* FASTEST */ + +#ifdef DEBUG +/* =========================================================================== + * Check that the match at match_start is indeed a match. + */ +local void check_match(s, start, match, length) + deflate_state *s; + IPos start, match; + int length; +{ + /* check that the match is indeed a match */ + if (zmemcmp(s->window + match, + s->window + start, length) != EQUAL) { + fprintf(stderr, " start %u, match %u, length %d\n", + start, match, length); + do { + fprintf(stderr, "%c%c", s->window[match++], s->window[start++]); + } while (--length != 0); + z_error("invalid match"); + } + if (z_verbose > 1) { + fprintf(stderr,"\\[%d,%d]", start-match, length); + do { putc(s->window[start++], stderr); } while (--length != 0); + } +} +#else +# define check_match(s, start, match, length) +#endif /* DEBUG */ + +/* =========================================================================== + * Fill the window when the lookahead becomes insufficient. + * Updates strstart and lookahead. + * + * IN assertion: lookahead < MIN_LOOKAHEAD + * OUT assertions: strstart <= window_size-MIN_LOOKAHEAD + * At least one byte has been read, or avail_in == 0; reads are + * performed for at least two bytes (required for the zip translate_eol + * option -- not supported here). + */ +local void fill_window(s) + deflate_state *s; +{ + register unsigned n, m; + register Posf *p; + unsigned more; /* Amount of free space at the end of the window. */ + uInt wsize = s->w_size; + + Assert(s->lookahead < MIN_LOOKAHEAD, "already enough lookahead"); + + do { + more = (unsigned)(s->window_size -(ulg)s->lookahead -(ulg)s->strstart); + + /* Deal with !@#$% 64K limit: */ + if (sizeof(int) <= 2) { + if (more == 0 && s->strstart == 0 && s->lookahead == 0) { + more = wsize; + + } else if (more == (unsigned)(-1)) { + /* Very unlikely, but possible on 16 bit machine if + * strstart == 0 && lookahead == 1 (input done a byte at time) + */ + more--; + } + } + + /* If the window is almost full and there is insufficient lookahead, + * move the upper half to the lower one to make room in the upper half. + */ + if (s->strstart >= wsize+MAX_DIST(s)) { + + zmemcpy(s->window, s->window+wsize, (unsigned)wsize); + s->match_start -= wsize; + s->strstart -= wsize; /* we now have strstart >= MAX_DIST */ + s->block_start -= (long) wsize; + + /* Slide the hash table (could be avoided with 32 bit values + at the expense of memory usage). We slide even when level == 0 + to keep the hash table consistent if we switch back to level > 0 + later. (Using level 0 permanently is not an optimal usage of + zlib, so we don't care about this pathological case.) + */ + n = s->hash_size; + p = &s->head[n]; + do { + m = *--p; + *p = (Pos)(m >= wsize ? m-wsize : NIL); + } while (--n); + + n = wsize; +#ifndef FASTEST + p = &s->prev[n]; + do { + m = *--p; + *p = (Pos)(m >= wsize ? m-wsize : NIL); + /* If n is not on any hash chain, prev[n] is garbage but + * its value will never be used. + */ + } while (--n); +#endif + more += wsize; + } + if (s->strm->avail_in == 0) break; + + /* If there was no sliding: + * strstart <= WSIZE+MAX_DIST-1 && lookahead <= MIN_LOOKAHEAD - 1 && + * more == window_size - lookahead - strstart + * => more >= window_size - (MIN_LOOKAHEAD-1 + WSIZE + MAX_DIST-1) + * => more >= window_size - 2*WSIZE + 2 + * In the BIG_MEM or MMAP case (not yet supported), + * window_size == input_size + MIN_LOOKAHEAD && + * strstart + s->lookahead <= input_size => more >= MIN_LOOKAHEAD. + * Otherwise, window_size == 2*WSIZE so more >= 2. + * If there was sliding, more >= WSIZE. So in all cases, more >= 2. + */ + Assert(more >= 2, "more < 2"); + + n = read_buf(s->strm, s->window + s->strstart + s->lookahead, more); + s->lookahead += n; + + /* Initialize the hash value now that we have some input: */ + if (s->lookahead + s->insert >= MIN_MATCH) { + uInt str = s->strstart - s->insert; + s->ins_h = s->window[str]; + UPDATE_HASH(s, s->ins_h, s->window[str + 1]); +#if MIN_MATCH != 3 + Call UPDATE_HASH() MIN_MATCH-3 more times +#endif + while (s->insert) { + UPDATE_HASH(s, s->ins_h, s->window[str + MIN_MATCH-1]); +#ifndef FASTEST + s->prev[str & s->w_mask] = s->head[s->ins_h]; +#endif + s->head[s->ins_h] = (Pos)str; + str++; + s->insert--; + if (s->lookahead + s->insert < MIN_MATCH) + break; + } + } + /* If the whole input has less than MIN_MATCH bytes, ins_h is garbage, + * but this is not important since only literal bytes will be emitted. + */ + + } while (s->lookahead < MIN_LOOKAHEAD && s->strm->avail_in != 0); + + /* If the WIN_INIT bytes after the end of the current data have never been + * written, then zero those bytes in order to avoid memory check reports of + * the use of uninitialized (or uninitialised as Julian writes) bytes by + * the longest match routines. Update the high water mark for the next + * time through here. WIN_INIT is set to MAX_MATCH since the longest match + * routines allow scanning to strstart + MAX_MATCH, ignoring lookahead. + */ + if (s->high_water < s->window_size) { + ulg curr = s->strstart + (ulg)(s->lookahead); + ulg init; + + if (s->high_water < curr) { + /* Previous high water mark below current data -- zero WIN_INIT + * bytes or up to end of window, whichever is less. + */ + init = s->window_size - curr; + if (init > WIN_INIT) + init = WIN_INIT; + zmemzero(s->window + curr, (unsigned)init); + s->high_water = curr + init; + } + else if (s->high_water < (ulg)curr + WIN_INIT) { + /* High water mark at or above current data, but below current data + * plus WIN_INIT -- zero out to current data plus WIN_INIT, or up + * to end of window, whichever is less. + */ + init = (ulg)curr + WIN_INIT - s->high_water; + if (init > s->window_size - s->high_water) + init = s->window_size - s->high_water; + zmemzero(s->window + s->high_water, (unsigned)init); + s->high_water += init; + } + } + + Assert((ulg)s->strstart <= s->window_size - MIN_LOOKAHEAD, + "not enough room for search"); +} + +/* =========================================================================== + * Flush the current block, with given end-of-file flag. + * IN assertion: strstart is set to the end of the current match. + */ +#define FLUSH_BLOCK_ONLY(s, last) { \ + _tr_flush_block(s, (s->block_start >= 0L ? \ + (charf *)&s->window[(unsigned)s->block_start] : \ + (charf *)Z_NULL), \ + (ulg)((long)s->strstart - s->block_start), \ + (last)); \ + s->block_start = s->strstart; \ + flush_pending(s->strm); \ + Tracev((stderr,"[FLUSH]")); \ +} + +/* Same but force premature exit if necessary. */ +#define FLUSH_BLOCK(s, last) { \ + FLUSH_BLOCK_ONLY(s, last); \ + if (s->strm->avail_out == 0) return (last) ? finish_started : need_more; \ +} + +/* =========================================================================== + * Copy without compression as much as possible from the input stream, return + * the current block state. + * This function does not insert new strings in the dictionary since + * uncompressible data is probably not useful. This function is used + * only for the level=0 compression option. + * NOTE: this function should be optimized to avoid extra copying from + * window to pending_buf. + */ +local block_state deflate_stored(s, flush) + deflate_state *s; + int flush; +{ + /* Stored blocks are limited to 0xffff bytes, pending_buf is limited + * to pending_buf_size, and each stored block has a 5 byte header: + */ + ulg max_block_size = 0xffff; + ulg max_start; + + if (max_block_size > s->pending_buf_size - 5) { + max_block_size = s->pending_buf_size - 5; + } + + /* Copy as much as possible from input to output: */ + for (;;) { + /* Fill the window as much as possible: */ + if (s->lookahead <= 1) { + + Assert(s->strstart < s->w_size+MAX_DIST(s) || + s->block_start >= (long)s->w_size, "slide too late"); + + fill_window(s); + if (s->lookahead == 0 && flush == Z_NO_FLUSH) return need_more; + + if (s->lookahead == 0) break; /* flush the current block */ + } + Assert(s->block_start >= 0L, "block gone"); + + s->strstart += s->lookahead; + s->lookahead = 0; + + /* Emit a stored block if pending_buf will be full: */ + max_start = s->block_start + max_block_size; + if (s->strstart == 0 || (ulg)s->strstart >= max_start) { + /* strstart == 0 is possible when wraparound on 16-bit machine */ + s->lookahead = (uInt)(s->strstart - max_start); + s->strstart = (uInt)max_start; + FLUSH_BLOCK(s, 0); + } + /* Flush if we may have to slide, otherwise block_start may become + * negative and the data will be gone: + */ + if (s->strstart - (uInt)s->block_start >= MAX_DIST(s)) { + FLUSH_BLOCK(s, 0); + } + } + s->insert = 0; + if (flush == Z_FINISH) { + FLUSH_BLOCK(s, 1); + return finish_done; + } + if ((long)s->strstart > s->block_start) + FLUSH_BLOCK(s, 0); + return block_done; +} + +/* =========================================================================== + * Compress as much as possible from the input stream, return the current + * block state. + * This function does not perform lazy evaluation of matches and inserts + * new strings in the dictionary only for unmatched strings or for short + * matches. It is used only for the fast compression options. + */ +local block_state deflate_fast(s, flush) + deflate_state *s; + int flush; +{ + IPos hash_head; /* head of the hash chain */ + int bflush; /* set if current block must be flushed */ + + for (;;) { + /* Make sure that we always have enough lookahead, except + * at the end of the input file. We need MAX_MATCH bytes + * for the next match, plus MIN_MATCH bytes to insert the + * string following the next match. + */ + if (s->lookahead < MIN_LOOKAHEAD) { + fill_window(s); + if (s->lookahead < MIN_LOOKAHEAD && flush == Z_NO_FLUSH) { + return need_more; + } + if (s->lookahead == 0) break; /* flush the current block */ + } + + /* Insert the string window[strstart .. strstart+2] in the + * dictionary, and set hash_head to the head of the hash chain: + */ + hash_head = NIL; + if (s->lookahead >= MIN_MATCH) { + INSERT_STRING(s, s->strstart, hash_head); + } + + /* Find the longest match, discarding those <= prev_length. + * At this point we have always match_length < MIN_MATCH + */ + if (hash_head != NIL && s->strstart - hash_head <= MAX_DIST(s)) { + /* To simplify the code, we prevent matches with the string + * of window index 0 (in particular we have to avoid a match + * of the string with itself at the start of the input file). + */ + s->match_length = longest_match (s, hash_head); + /* longest_match() sets match_start */ + } + if (s->match_length >= MIN_MATCH) { + check_match(s, s->strstart, s->match_start, s->match_length); + + _tr_tally_dist(s, s->strstart - s->match_start, + s->match_length - MIN_MATCH, bflush); + + s->lookahead -= s->match_length; + + /* Insert new strings in the hash table only if the match length + * is not too large. This saves time but degrades compression. + */ +#ifndef FASTEST + if (s->match_length <= s->max_insert_length && + s->lookahead >= MIN_MATCH) { + s->match_length--; /* string at strstart already in table */ + do { + s->strstart++; + INSERT_STRING(s, s->strstart, hash_head); + /* strstart never exceeds WSIZE-MAX_MATCH, so there are + * always MIN_MATCH bytes ahead. + */ + } while (--s->match_length != 0); + s->strstart++; + } else +#endif + { + s->strstart += s->match_length; + s->match_length = 0; + s->ins_h = s->window[s->strstart]; + UPDATE_HASH(s, s->ins_h, s->window[s->strstart+1]); +#if MIN_MATCH != 3 + Call UPDATE_HASH() MIN_MATCH-3 more times +#endif + /* If lookahead < MIN_MATCH, ins_h is garbage, but it does not + * matter since it will be recomputed at next deflate call. + */ + } + } else { + /* No match, output a literal byte */ + Tracevv((stderr,"%c", s->window[s->strstart])); + _tr_tally_lit (s, s->window[s->strstart], bflush); + s->lookahead--; + s->strstart++; + } + if (bflush) FLUSH_BLOCK(s, 0); + } + s->insert = s->strstart < MIN_MATCH-1 ? s->strstart : MIN_MATCH-1; + if (flush == Z_FINISH) { + FLUSH_BLOCK(s, 1); + return finish_done; + } + if (s->last_lit) + FLUSH_BLOCK(s, 0); + return block_done; +} + +#ifndef FASTEST +/* =========================================================================== + * Same as above, but achieves better compression. We use a lazy + * evaluation for matches: a match is finally adopted only if there is + * no better match at the next window position. + */ +local block_state deflate_slow(s, flush) + deflate_state *s; + int flush; +{ + IPos hash_head; /* head of hash chain */ + int bflush; /* set if current block must be flushed */ + + /* Process the input block. */ + for (;;) { + /* Make sure that we always have enough lookahead, except + * at the end of the input file. We need MAX_MATCH bytes + * for the next match, plus MIN_MATCH bytes to insert the + * string following the next match. + */ + if (s->lookahead < MIN_LOOKAHEAD) { + fill_window(s); + if (s->lookahead < MIN_LOOKAHEAD && flush == Z_NO_FLUSH) { + return need_more; + } + if (s->lookahead == 0) break; /* flush the current block */ + } + + /* Insert the string window[strstart .. strstart+2] in the + * dictionary, and set hash_head to the head of the hash chain: + */ + hash_head = NIL; + if (s->lookahead >= MIN_MATCH) { + INSERT_STRING(s, s->strstart, hash_head); + } + + /* Find the longest match, discarding those <= prev_length. + */ + s->prev_length = s->match_length, s->prev_match = s->match_start; + s->match_length = MIN_MATCH-1; + + if (hash_head != NIL && s->prev_length < s->max_lazy_match && + s->strstart - hash_head <= MAX_DIST(s)) { + /* To simplify the code, we prevent matches with the string + * of window index 0 (in particular we have to avoid a match + * of the string with itself at the start of the input file). + */ + s->match_length = longest_match (s, hash_head); + /* longest_match() sets match_start */ + + if (s->match_length <= 5 && (s->strategy == Z_FILTERED +#if TOO_FAR <= 32767 + || (s->match_length == MIN_MATCH && + s->strstart - s->match_start > TOO_FAR) +#endif + )) { + + /* If prev_match is also MIN_MATCH, match_start is garbage + * but we will ignore the current match anyway. + */ + s->match_length = MIN_MATCH-1; + } + } + /* If there was a match at the previous step and the current + * match is not better, output the previous match: + */ + if (s->prev_length >= MIN_MATCH && s->match_length <= s->prev_length) { + uInt max_insert = s->strstart + s->lookahead - MIN_MATCH; + /* Do not insert strings in hash table beyond this. */ + + check_match(s, s->strstart-1, s->prev_match, s->prev_length); + + _tr_tally_dist(s, s->strstart -1 - s->prev_match, + s->prev_length - MIN_MATCH, bflush); + + /* Insert in hash table all strings up to the end of the match. + * strstart-1 and strstart are already inserted. If there is not + * enough lookahead, the last two strings are not inserted in + * the hash table. + */ + s->lookahead -= s->prev_length-1; + s->prev_length -= 2; + do { + if (++s->strstart <= max_insert) { + INSERT_STRING(s, s->strstart, hash_head); + } + } while (--s->prev_length != 0); + s->match_available = 0; + s->match_length = MIN_MATCH-1; + s->strstart++; + + if (bflush) FLUSH_BLOCK(s, 0); + + } else if (s->match_available) { + /* If there was no match at the previous position, output a + * single literal. If there was a match but the current match + * is longer, truncate the previous match to a single literal. + */ + Tracevv((stderr,"%c", s->window[s->strstart-1])); + _tr_tally_lit(s, s->window[s->strstart-1], bflush); + if (bflush) { + FLUSH_BLOCK_ONLY(s, 0); + } + s->strstart++; + s->lookahead--; + if (s->strm->avail_out == 0) return need_more; + } else { + /* There is no previous match to compare with, wait for + * the next step to decide. + */ + s->match_available = 1; + s->strstart++; + s->lookahead--; + } + } + Assert (flush != Z_NO_FLUSH, "no flush?"); + if (s->match_available) { + Tracevv((stderr,"%c", s->window[s->strstart-1])); + _tr_tally_lit(s, s->window[s->strstart-1], bflush); + s->match_available = 0; + } + s->insert = s->strstart < MIN_MATCH-1 ? s->strstart : MIN_MATCH-1; + if (flush == Z_FINISH) { + FLUSH_BLOCK(s, 1); + return finish_done; + } + if (s->last_lit) + FLUSH_BLOCK(s, 0); + return block_done; +} +#endif /* FASTEST */ + +/* =========================================================================== + * For Z_RLE, simply look for runs of bytes, generate matches only of distance + * one. Do not maintain a hash table. (It will be regenerated if this run of + * deflate switches away from Z_RLE.) + */ +local block_state deflate_rle(s, flush) + deflate_state *s; + int flush; +{ + int bflush; /* set if current block must be flushed */ + uInt prev; /* byte at distance one to match */ + Bytef *scan, *strend; /* scan goes up to strend for length of run */ + + for (;;) { + /* Make sure that we always have enough lookahead, except + * at the end of the input file. We need MAX_MATCH bytes + * for the longest run, plus one for the unrolled loop. + */ + if (s->lookahead <= MAX_MATCH) { + fill_window(s); + if (s->lookahead <= MAX_MATCH && flush == Z_NO_FLUSH) { + return need_more; + } + if (s->lookahead == 0) break; /* flush the current block */ + } + + /* See how many times the previous byte repeats */ + s->match_length = 0; + if (s->lookahead >= MIN_MATCH && s->strstart > 0) { + scan = s->window + s->strstart - 1; + prev = *scan; + if (prev == *++scan && prev == *++scan && prev == *++scan) { + strend = s->window + s->strstart + MAX_MATCH; + do { + } while (prev == *++scan && prev == *++scan && + prev == *++scan && prev == *++scan && + prev == *++scan && prev == *++scan && + prev == *++scan && prev == *++scan && + scan < strend); + s->match_length = MAX_MATCH - (int)(strend - scan); + if (s->match_length > s->lookahead) + s->match_length = s->lookahead; + } + Assert(scan <= s->window+(uInt)(s->window_size-1), "wild scan"); + } + + /* Emit match if have run of MIN_MATCH or longer, else emit literal */ + if (s->match_length >= MIN_MATCH) { + check_match(s, s->strstart, s->strstart - 1, s->match_length); + + _tr_tally_dist(s, 1, s->match_length - MIN_MATCH, bflush); + + s->lookahead -= s->match_length; + s->strstart += s->match_length; + s->match_length = 0; + } else { + /* No match, output a literal byte */ + Tracevv((stderr,"%c", s->window[s->strstart])); + _tr_tally_lit (s, s->window[s->strstart], bflush); + s->lookahead--; + s->strstart++; + } + if (bflush) FLUSH_BLOCK(s, 0); + } + s->insert = 0; + if (flush == Z_FINISH) { + FLUSH_BLOCK(s, 1); + return finish_done; + } + if (s->last_lit) + FLUSH_BLOCK(s, 0); + return block_done; +} + +/* =========================================================================== + * For Z_HUFFMAN_ONLY, do not look for matches. Do not maintain a hash table. + * (It will be regenerated if this run of deflate switches away from Huffman.) + */ +local block_state deflate_huff(s, flush) + deflate_state *s; + int flush; +{ + int bflush; /* set if current block must be flushed */ + + for (;;) { + /* Make sure that we have a literal to write. */ + if (s->lookahead == 0) { + fill_window(s); + if (s->lookahead == 0) { + if (flush == Z_NO_FLUSH) + return need_more; + break; /* flush the current block */ + } + } + + /* Output a literal byte */ + s->match_length = 0; + Tracevv((stderr,"%c", s->window[s->strstart])); + _tr_tally_lit (s, s->window[s->strstart], bflush); + s->lookahead--; + s->strstart++; + if (bflush) FLUSH_BLOCK(s, 0); + } + s->insert = 0; + if (flush == Z_FINISH) { + FLUSH_BLOCK(s, 1); + return finish_done; + } + if (s->last_lit) + FLUSH_BLOCK(s, 0); + return block_done; +} diff --git a/software/scsi2sd-util/zlib-1.2.8/deflate.h b/software/scsi2sd-util/zlib-1.2.8/deflate.h new file mode 100644 index 0000000..ce0299e --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/deflate.h @@ -0,0 +1,346 @@ +/* deflate.h -- internal compression state + * Copyright (C) 1995-2012 Jean-loup Gailly + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* WARNING: this file should *not* be used by applications. It is + part of the implementation of the compression library and is + subject to change. Applications should only use zlib.h. + */ + +/* @(#) $Id$ */ + +#ifndef DEFLATE_H +#define DEFLATE_H + +#include "zutil.h" + +/* define NO_GZIP when compiling if you want to disable gzip header and + trailer creation by deflate(). NO_GZIP would be used to avoid linking in + the crc code when it is not needed. For shared libraries, gzip encoding + should be left enabled. */ +#ifndef NO_GZIP +# define GZIP +#endif + +/* =========================================================================== + * Internal compression state. + */ + +#define LENGTH_CODES 29 +/* number of length codes, not counting the special END_BLOCK code */ + +#define LITERALS 256 +/* number of literal bytes 0..255 */ + +#define L_CODES (LITERALS+1+LENGTH_CODES) +/* number of Literal or Length codes, including the END_BLOCK code */ + +#define D_CODES 30 +/* number of distance codes */ + +#define BL_CODES 19 +/* number of codes used to transfer the bit lengths */ + +#define HEAP_SIZE (2*L_CODES+1) +/* maximum heap size */ + +#define MAX_BITS 15 +/* All codes must not exceed MAX_BITS bits */ + +#define Buf_size 16 +/* size of bit buffer in bi_buf */ + +#define INIT_STATE 42 +#define EXTRA_STATE 69 +#define NAME_STATE 73 +#define COMMENT_STATE 91 +#define HCRC_STATE 103 +#define BUSY_STATE 113 +#define FINISH_STATE 666 +/* Stream status */ + + +/* Data structure describing a single value and its code string. */ +typedef struct ct_data_s { + union { + ush freq; /* frequency count */ + ush code; /* bit string */ + } fc; + union { + ush dad; /* father node in Huffman tree */ + ush len; /* length of bit string */ + } dl; +} FAR ct_data; + +#define Freq fc.freq +#define Code fc.code +#define Dad dl.dad +#define Len dl.len + +typedef struct static_tree_desc_s static_tree_desc; + +typedef struct tree_desc_s { + ct_data *dyn_tree; /* the dynamic tree */ + int max_code; /* largest code with non zero frequency */ + static_tree_desc *stat_desc; /* the corresponding static tree */ +} FAR tree_desc; + +typedef ush Pos; +typedef Pos FAR Posf; +typedef unsigned IPos; + +/* A Pos is an index in the character window. We use short instead of int to + * save space in the various tables. IPos is used only for parameter passing. + */ + +typedef struct internal_state { + z_streamp strm; /* pointer back to this zlib stream */ + int status; /* as the name implies */ + Bytef *pending_buf; /* output still pending */ + ulg pending_buf_size; /* size of pending_buf */ + Bytef *pending_out; /* next pending byte to output to the stream */ + uInt pending; /* nb of bytes in the pending buffer */ + int wrap; /* bit 0 true for zlib, bit 1 true for gzip */ + gz_headerp gzhead; /* gzip header information to write */ + uInt gzindex; /* where in extra, name, or comment */ + Byte method; /* can only be DEFLATED */ + int last_flush; /* value of flush param for previous deflate call */ + + /* used by deflate.c: */ + + uInt w_size; /* LZ77 window size (32K by default) */ + uInt w_bits; /* log2(w_size) (8..16) */ + uInt w_mask; /* w_size - 1 */ + + Bytef *window; + /* Sliding window. Input bytes are read into the second half of the window, + * and move to the first half later to keep a dictionary of at least wSize + * bytes. With this organization, matches are limited to a distance of + * wSize-MAX_MATCH bytes, but this ensures that IO is always + * performed with a length multiple of the block size. Also, it limits + * the window size to 64K, which is quite useful on MSDOS. + * To do: use the user input buffer as sliding window. + */ + + ulg window_size; + /* Actual size of window: 2*wSize, except when the user input buffer + * is directly used as sliding window. + */ + + Posf *prev; + /* Link to older string with same hash index. To limit the size of this + * array to 64K, this link is maintained only for the last 32K strings. + * An index in this array is thus a window index modulo 32K. + */ + + Posf *head; /* Heads of the hash chains or NIL. */ + + uInt ins_h; /* hash index of string to be inserted */ + uInt hash_size; /* number of elements in hash table */ + uInt hash_bits; /* log2(hash_size) */ + uInt hash_mask; /* hash_size-1 */ + + uInt hash_shift; + /* Number of bits by which ins_h must be shifted at each input + * step. It must be such that after MIN_MATCH steps, the oldest + * byte no longer takes part in the hash key, that is: + * hash_shift * MIN_MATCH >= hash_bits + */ + + long block_start; + /* Window position at the beginning of the current output block. Gets + * negative when the window is moved backwards. + */ + + uInt match_length; /* length of best match */ + IPos prev_match; /* previous match */ + int match_available; /* set if previous match exists */ + uInt strstart; /* start of string to insert */ + uInt match_start; /* start of matching string */ + uInt lookahead; /* number of valid bytes ahead in window */ + + uInt prev_length; + /* Length of the best match at previous step. Matches not greater than this + * are discarded. This is used in the lazy match evaluation. + */ + + uInt max_chain_length; + /* To speed up deflation, hash chains are never searched beyond this + * length. A higher limit improves compression ratio but degrades the + * speed. + */ + + uInt max_lazy_match; + /* Attempt to find a better match only when the current match is strictly + * smaller than this value. This mechanism is used only for compression + * levels >= 4. + */ +# define max_insert_length max_lazy_match + /* Insert new strings in the hash table only if the match length is not + * greater than this length. This saves time but degrades compression. + * max_insert_length is used only for compression levels <= 3. + */ + + int level; /* compression level (1..9) */ + int strategy; /* favor or force Huffman coding*/ + + uInt good_match; + /* Use a faster search when the previous match is longer than this */ + + int nice_match; /* Stop searching when current match exceeds this */ + + /* used by trees.c: */ + /* Didn't use ct_data typedef below to suppress compiler warning */ + struct ct_data_s dyn_ltree[HEAP_SIZE]; /* literal and length tree */ + struct ct_data_s dyn_dtree[2*D_CODES+1]; /* distance tree */ + struct ct_data_s bl_tree[2*BL_CODES+1]; /* Huffman tree for bit lengths */ + + struct tree_desc_s l_desc; /* desc. for literal tree */ + struct tree_desc_s d_desc; /* desc. for distance tree */ + struct tree_desc_s bl_desc; /* desc. for bit length tree */ + + ush bl_count[MAX_BITS+1]; + /* number of codes at each bit length for an optimal tree */ + + int heap[2*L_CODES+1]; /* heap used to build the Huffman trees */ + int heap_len; /* number of elements in the heap */ + int heap_max; /* element of largest frequency */ + /* The sons of heap[n] are heap[2*n] and heap[2*n+1]. heap[0] is not used. + * The same heap array is used to build all trees. + */ + + uch depth[2*L_CODES+1]; + /* Depth of each subtree used as tie breaker for trees of equal frequency + */ + + uchf *l_buf; /* buffer for literals or lengths */ + + uInt lit_bufsize; + /* Size of match buffer for literals/lengths. There are 4 reasons for + * limiting lit_bufsize to 64K: + * - frequencies can be kept in 16 bit counters + * - if compression is not successful for the first block, all input + * data is still in the window so we can still emit a stored block even + * when input comes from standard input. (This can also be done for + * all blocks if lit_bufsize is not greater than 32K.) + * - if compression is not successful for a file smaller than 64K, we can + * even emit a stored file instead of a stored block (saving 5 bytes). + * This is applicable only for zip (not gzip or zlib). + * - creating new Huffman trees less frequently may not provide fast + * adaptation to changes in the input data statistics. (Take for + * example a binary file with poorly compressible code followed by + * a highly compressible string table.) Smaller buffer sizes give + * fast adaptation but have of course the overhead of transmitting + * trees more frequently. + * - I can't count above 4 + */ + + uInt last_lit; /* running index in l_buf */ + + ushf *d_buf; + /* Buffer for distances. To simplify the code, d_buf and l_buf have + * the same number of elements. To use different lengths, an extra flag + * array would be necessary. + */ + + ulg opt_len; /* bit length of current block with optimal trees */ + ulg static_len; /* bit length of current block with static trees */ + uInt matches; /* number of string matches in current block */ + uInt insert; /* bytes at end of window left to insert */ + +#ifdef DEBUG + ulg compressed_len; /* total bit length of compressed file mod 2^32 */ + ulg bits_sent; /* bit length of compressed data sent mod 2^32 */ +#endif + + ush bi_buf; + /* Output buffer. bits are inserted starting at the bottom (least + * significant bits). + */ + int bi_valid; + /* Number of valid bits in bi_buf. All bits above the last valid bit + * are always zero. + */ + + ulg high_water; + /* High water mark offset in window for initialized bytes -- bytes above + * this are set to zero in order to avoid memory check warnings when + * longest match routines access bytes past the input. This is then + * updated to the new high water mark. + */ + +} FAR deflate_state; + +/* Output a byte on the stream. + * IN assertion: there is enough room in pending_buf. + */ +#define put_byte(s, c) {s->pending_buf[s->pending++] = (c);} + + +#define MIN_LOOKAHEAD (MAX_MATCH+MIN_MATCH+1) +/* Minimum amount of lookahead, except at the end of the input file. + * See deflate.c for comments about the MIN_MATCH+1. + */ + +#define MAX_DIST(s) ((s)->w_size-MIN_LOOKAHEAD) +/* In order to simplify the code, particularly on 16 bit machines, match + * distances are limited to MAX_DIST instead of WSIZE. + */ + +#define WIN_INIT MAX_MATCH +/* Number of bytes after end of data in window to initialize in order to avoid + memory checker errors from longest match routines */ + + /* in trees.c */ +void ZLIB_INTERNAL _tr_init OF((deflate_state *s)); +int ZLIB_INTERNAL _tr_tally OF((deflate_state *s, unsigned dist, unsigned lc)); +void ZLIB_INTERNAL _tr_flush_block OF((deflate_state *s, charf *buf, + ulg stored_len, int last)); +void ZLIB_INTERNAL _tr_flush_bits OF((deflate_state *s)); +void ZLIB_INTERNAL _tr_align OF((deflate_state *s)); +void ZLIB_INTERNAL _tr_stored_block OF((deflate_state *s, charf *buf, + ulg stored_len, int last)); + +#define d_code(dist) \ + ((dist) < 256 ? _dist_code[dist] : _dist_code[256+((dist)>>7)]) +/* Mapping from a distance to a distance code. dist is the distance - 1 and + * must not have side effects. _dist_code[256] and _dist_code[257] are never + * used. + */ + +#ifndef DEBUG +/* Inline versions of _tr_tally for speed: */ + +#if defined(GEN_TREES_H) || !defined(STDC) + extern uch ZLIB_INTERNAL _length_code[]; + extern uch ZLIB_INTERNAL _dist_code[]; +#else + extern const uch ZLIB_INTERNAL _length_code[]; + extern const uch ZLIB_INTERNAL _dist_code[]; +#endif + +# define _tr_tally_lit(s, c, flush) \ + { uch cc = (c); \ + s->d_buf[s->last_lit] = 0; \ + s->l_buf[s->last_lit++] = cc; \ + s->dyn_ltree[cc].Freq++; \ + flush = (s->last_lit == s->lit_bufsize-1); \ + } +# define _tr_tally_dist(s, distance, length, flush) \ + { uch len = (length); \ + ush dist = (distance); \ + s->d_buf[s->last_lit] = dist; \ + s->l_buf[s->last_lit++] = len; \ + dist--; \ + s->dyn_ltree[_length_code[len]+LITERALS+1].Freq++; \ + s->dyn_dtree[d_code(dist)].Freq++; \ + flush = (s->last_lit == s->lit_bufsize-1); \ + } +#else +# define _tr_tally_lit(s, c, flush) flush = _tr_tally(s, 0, c) +# define _tr_tally_dist(s, distance, length, flush) \ + flush = _tr_tally(s, distance, length) +#endif + +#endif /* DEFLATE_H */ diff --git a/software/scsi2sd-util/zlib-1.2.8/doc/algorithm.txt b/software/scsi2sd-util/zlib-1.2.8/doc/algorithm.txt new file mode 100644 index 0000000..c97f495 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/doc/algorithm.txt @@ -0,0 +1,209 @@ +1. Compression algorithm (deflate) + +The deflation algorithm used by gzip (also zip and zlib) is a variation of +LZ77 (Lempel-Ziv 1977, see reference below). It finds duplicated strings in +the input data. The second occurrence of a string is replaced by a +pointer to the previous string, in the form of a pair (distance, +length). Distances are limited to 32K bytes, and lengths are limited +to 258 bytes. When a string does not occur anywhere in the previous +32K bytes, it is emitted as a sequence of literal bytes. (In this +description, `string' must be taken as an arbitrary sequence of bytes, +and is not restricted to printable characters.) + +Literals or match lengths are compressed with one Huffman tree, and +match distances are compressed with another tree. The trees are stored +in a compact form at the start of each block. The blocks can have any +size (except that the compressed data for one block must fit in +available memory). A block is terminated when deflate() determines that +it would be useful to start another block with fresh trees. (This is +somewhat similar to the behavior of LZW-based _compress_.) + +Duplicated strings are found using a hash table. All input strings of +length 3 are inserted in the hash table. A hash index is computed for +the next 3 bytes. If the hash chain for this index is not empty, all +strings in the chain are compared with the current input string, and +the longest match is selected. + +The hash chains are searched starting with the most recent strings, to +favor small distances and thus take advantage of the Huffman encoding. +The hash chains are singly linked. There are no deletions from the +hash chains, the algorithm simply discards matches that are too old. + +To avoid a worst-case situation, very long hash chains are arbitrarily +truncated at a certain length, determined by a runtime option (level +parameter of deflateInit). So deflate() does not always find the longest +possible match but generally finds a match which is long enough. + +deflate() also defers the selection of matches with a lazy evaluation +mechanism. After a match of length N has been found, deflate() searches for +a longer match at the next input byte. If a longer match is found, the +previous match is truncated to a length of one (thus producing a single +literal byte) and the process of lazy evaluation begins again. Otherwise, +the original match is kept, and the next match search is attempted only N +steps later. + +The lazy match evaluation is also subject to a runtime parameter. If +the current match is long enough, deflate() reduces the search for a longer +match, thus speeding up the whole process. If compression ratio is more +important than speed, deflate() attempts a complete second search even if +the first match is already long enough. + +The lazy match evaluation is not performed for the fastest compression +modes (level parameter 1 to 3). For these fast modes, new strings +are inserted in the hash table only when no match was found, or +when the match is not too long. This degrades the compression ratio +but saves time since there are both fewer insertions and fewer searches. + + +2. Decompression algorithm (inflate) + +2.1 Introduction + +The key question is how to represent a Huffman code (or any prefix code) so +that you can decode fast. The most important characteristic is that shorter +codes are much more common than longer codes, so pay attention to decoding the +short codes fast, and let the long codes take longer to decode. + +inflate() sets up a first level table that covers some number of bits of +input less than the length of longest code. It gets that many bits from the +stream, and looks it up in the table. The table will tell if the next +code is that many bits or less and how many, and if it is, it will tell +the value, else it will point to the next level table for which inflate() +grabs more bits and tries to decode a longer code. + +How many bits to make the first lookup is a tradeoff between the time it +takes to decode and the time it takes to build the table. If building the +table took no time (and if you had infinite memory), then there would only +be a first level table to cover all the way to the longest code. However, +building the table ends up taking a lot longer for more bits since short +codes are replicated many times in such a table. What inflate() does is +simply to make the number of bits in the first table a variable, and then +to set that variable for the maximum speed. + +For inflate, which has 286 possible codes for the literal/length tree, the size +of the first table is nine bits. Also the distance trees have 30 possible +values, and the size of the first table is six bits. Note that for each of +those cases, the table ended up one bit longer than the ``average'' code +length, i.e. the code length of an approximately flat code which would be a +little more than eight bits for 286 symbols and a little less than five bits +for 30 symbols. + + +2.2 More details on the inflate table lookup + +Ok, you want to know what this cleverly obfuscated inflate tree actually +looks like. You are correct that it's not a Huffman tree. It is simply a +lookup table for the first, let's say, nine bits of a Huffman symbol. The +symbol could be as short as one bit or as long as 15 bits. If a particular +symbol is shorter than nine bits, then that symbol's translation is duplicated +in all those entries that start with that symbol's bits. For example, if the +symbol is four bits, then it's duplicated 32 times in a nine-bit table. If a +symbol is nine bits long, it appears in the table once. + +If the symbol is longer than nine bits, then that entry in the table points +to another similar table for the remaining bits. Again, there are duplicated +entries as needed. The idea is that most of the time the symbol will be short +and there will only be one table look up. (That's whole idea behind data +compression in the first place.) For the less frequent long symbols, there +will be two lookups. If you had a compression method with really long +symbols, you could have as many levels of lookups as is efficient. For +inflate, two is enough. + +So a table entry either points to another table (in which case nine bits in +the above example are gobbled), or it contains the translation for the symbol +and the number of bits to gobble. Then you start again with the next +ungobbled bit. + +You may wonder: why not just have one lookup table for how ever many bits the +longest symbol is? The reason is that if you do that, you end up spending +more time filling in duplicate symbol entries than you do actually decoding. +At least for deflate's output that generates new trees every several 10's of +kbytes. You can imagine that filling in a 2^15 entry table for a 15-bit code +would take too long if you're only decoding several thousand symbols. At the +other extreme, you could make a new table for every bit in the code. In fact, +that's essentially a Huffman tree. But then you spend too much time +traversing the tree while decoding, even for short symbols. + +So the number of bits for the first lookup table is a trade of the time to +fill out the table vs. the time spent looking at the second level and above of +the table. + +Here is an example, scaled down: + +The code being decoded, with 10 symbols, from 1 to 6 bits long: + +A: 0 +B: 10 +C: 1100 +D: 11010 +E: 11011 +F: 11100 +G: 11101 +H: 11110 +I: 111110 +J: 111111 + +Let's make the first table three bits long (eight entries): + +000: A,1 +001: A,1 +010: A,1 +011: A,1 +100: B,2 +101: B,2 +110: -> table X (gobble 3 bits) +111: -> table Y (gobble 3 bits) + +Each entry is what the bits decode as and how many bits that is, i.e. how +many bits to gobble. Or the entry points to another table, with the number of +bits to gobble implicit in the size of the table. + +Table X is two bits long since the longest code starting with 110 is five bits +long: + +00: C,1 +01: C,1 +10: D,2 +11: E,2 + +Table Y is three bits long since the longest code starting with 111 is six +bits long: + +000: F,2 +001: F,2 +010: G,2 +011: G,2 +100: H,2 +101: H,2 +110: I,3 +111: J,3 + +So what we have here are three tables with a total of 20 entries that had to +be constructed. That's compared to 64 entries for a single table. Or +compared to 16 entries for a Huffman tree (six two entry tables and one four +entry table). Assuming that the code ideally represents the probability of +the symbols, it takes on the average 1.25 lookups per symbol. That's compared +to one lookup for the single table, or 1.66 lookups per symbol for the +Huffman tree. + +There, I think that gives you a picture of what's going on. For inflate, the +meaning of a particular symbol is often more than just a letter. It can be a +byte (a "literal"), or it can be either a length or a distance which +indicates a base value and a number of bits to fetch after the code that is +added to the base value. Or it might be the special end-of-block code. The +data structures created in inftrees.c try to encode all that information +compactly in the tables. + + +Jean-loup Gailly Mark Adler +jloup@gzip.org madler@alumni.caltech.edu + + +References: + +[LZ77] Ziv J., Lempel A., ``A Universal Algorithm for Sequential Data +Compression,'' IEEE Transactions on Information Theory, Vol. 23, No. 3, +pp. 337-343. + +``DEFLATE Compressed Data Format Specification'' available in +http://tools.ietf.org/html/rfc1951 diff --git a/software/scsi2sd-util/zlib-1.2.8/doc/rfc1950.txt b/software/scsi2sd-util/zlib-1.2.8/doc/rfc1950.txt new file mode 100644 index 0000000..ce6428a --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/doc/rfc1950.txt @@ -0,0 +1,619 @@ + + + + + + +Network Working Group P. Deutsch +Request for Comments: 1950 Aladdin Enterprises +Category: Informational J-L. Gailly + Info-ZIP + May 1996 + + + ZLIB Compressed Data Format Specification version 3.3 + +Status of This Memo + + This memo provides information for the Internet community. This memo + does not specify an Internet standard of any kind. Distribution of + this memo is unlimited. + +IESG Note: + + The IESG takes no position on the validity of any Intellectual + Property Rights statements contained in this document. + +Notices + + Copyright (c) 1996 L. Peter Deutsch and Jean-Loup Gailly + + Permission is granted to copy and distribute this document for any + purpose and without charge, including translations into other + languages and incorporation into compilations, provided that the + copyright notice and this notice are preserved, and that any + substantive changes or deletions from the original are clearly + marked. + + A pointer to the latest version of this and related documentation in + HTML format can be found at the URL + . + +Abstract + + This specification defines a lossless compressed data format. The + data can be produced or consumed, even for an arbitrarily long + sequentially presented input data stream, using only an a priori + bounded amount of intermediate storage. The format presently uses + the DEFLATE compression method but can be easily extended to use + other compression methods. It can be implemented readily in a manner + not covered by patents. This specification also defines the ADLER-32 + checksum (an extension and improvement of the Fletcher checksum), + used for detection of data corruption, and provides an algorithm for + computing it. + + + + +Deutsch & Gailly Informational [Page 1] + +RFC 1950 ZLIB Compressed Data Format Specification May 1996 + + +Table of Contents + + 1. Introduction ................................................... 2 + 1.1. Purpose ................................................... 2 + 1.2. Intended audience ......................................... 3 + 1.3. Scope ..................................................... 3 + 1.4. Compliance ................................................ 3 + 1.5. Definitions of terms and conventions used ................ 3 + 1.6. Changes from previous versions ............................ 3 + 2. Detailed specification ......................................... 3 + 2.1. Overall conventions ....................................... 3 + 2.2. Data format ............................................... 4 + 2.3. Compliance ................................................ 7 + 3. References ..................................................... 7 + 4. Source code .................................................... 8 + 5. Security Considerations ........................................ 8 + 6. Acknowledgements ............................................... 8 + 7. Authors' Addresses ............................................. 8 + 8. Appendix: Rationale ............................................ 9 + 9. Appendix: Sample code ..........................................10 + +1. Introduction + + 1.1. Purpose + + The purpose of this specification is to define a lossless + compressed data format that: + + * Is independent of CPU type, operating system, file system, + and character set, and hence can be used for interchange; + + * Can be produced or consumed, even for an arbitrarily long + sequentially presented input data stream, using only an a + priori bounded amount of intermediate storage, and hence can + be used in data communications or similar structures such as + Unix filters; + + * Can use a number of different compression methods; + + * Can be implemented readily in a manner not covered by + patents, and hence can be practiced freely. + + The data format defined by this specification does not attempt to + allow random access to compressed data. + + + + + + + +Deutsch & Gailly Informational [Page 2] + +RFC 1950 ZLIB Compressed Data Format Specification May 1996 + + + 1.2. Intended audience + + This specification is intended for use by implementors of software + to compress data into zlib format and/or decompress data from zlib + format. + + The text of the specification assumes a basic background in + programming at the level of bits and other primitive data + representations. + + 1.3. Scope + + The specification specifies a compressed data format that can be + used for in-memory compression of a sequence of arbitrary bytes. + + 1.4. Compliance + + Unless otherwise indicated below, a compliant decompressor must be + able to accept and decompress any data set that conforms to all + the specifications presented here; a compliant compressor must + produce data sets that conform to all the specifications presented + here. + + 1.5. Definitions of terms and conventions used + + byte: 8 bits stored or transmitted as a unit (same as an octet). + (For this specification, a byte is exactly 8 bits, even on + machines which store a character on a number of bits different + from 8.) See below, for the numbering of bits within a byte. + + 1.6. Changes from previous versions + + Version 3.1 was the first public release of this specification. + In version 3.2, some terminology was changed and the Adler-32 + sample code was rewritten for clarity. In version 3.3, the + support for a preset dictionary was introduced, and the + specification was converted to RFC style. + +2. Detailed specification + + 2.1. Overall conventions + + In the diagrams below, a box like this: + + +---+ + | | <-- the vertical bars might be missing + +---+ + + + + +Deutsch & Gailly Informational [Page 3] + +RFC 1950 ZLIB Compressed Data Format Specification May 1996 + + + represents one byte; a box like this: + + +==============+ + | | + +==============+ + + represents a variable number of bytes. + + Bytes stored within a computer do not have a "bit order", since + they are always treated as a unit. However, a byte considered as + an integer between 0 and 255 does have a most- and least- + significant bit, and since we write numbers with the most- + significant digit on the left, we also write bytes with the most- + significant bit on the left. In the diagrams below, we number the + bits of a byte so that bit 0 is the least-significant bit, i.e., + the bits are numbered: + + +--------+ + |76543210| + +--------+ + + Within a computer, a number may occupy multiple bytes. All + multi-byte numbers in the format described here are stored with + the MOST-significant byte first (at the lower memory address). + For example, the decimal number 520 is stored as: + + 0 1 + +--------+--------+ + |00000010|00001000| + +--------+--------+ + ^ ^ + | | + | + less significant byte = 8 + + more significant byte = 2 x 256 + + 2.2. Data format + + A zlib stream has the following structure: + + 0 1 + +---+---+ + |CMF|FLG| (more-->) + +---+---+ + + + + + + + + +Deutsch & Gailly Informational [Page 4] + +RFC 1950 ZLIB Compressed Data Format Specification May 1996 + + + (if FLG.FDICT set) + + 0 1 2 3 + +---+---+---+---+ + | DICTID | (more-->) + +---+---+---+---+ + + +=====================+---+---+---+---+ + |...compressed data...| ADLER32 | + +=====================+---+---+---+---+ + + Any data which may appear after ADLER32 are not part of the zlib + stream. + + CMF (Compression Method and flags) + This byte is divided into a 4-bit compression method and a 4- + bit information field depending on the compression method. + + bits 0 to 3 CM Compression method + bits 4 to 7 CINFO Compression info + + CM (Compression method) + This identifies the compression method used in the file. CM = 8 + denotes the "deflate" compression method with a window size up + to 32K. This is the method used by gzip and PNG (see + references [1] and [2] in Chapter 3, below, for the reference + documents). CM = 15 is reserved. It might be used in a future + version of this specification to indicate the presence of an + extra field before the compressed data. + + CINFO (Compression info) + For CM = 8, CINFO is the base-2 logarithm of the LZ77 window + size, minus eight (CINFO=7 indicates a 32K window size). Values + of CINFO above 7 are not allowed in this version of the + specification. CINFO is not defined in this specification for + CM not equal to 8. + + FLG (FLaGs) + This flag byte is divided as follows: + + bits 0 to 4 FCHECK (check bits for CMF and FLG) + bit 5 FDICT (preset dictionary) + bits 6 to 7 FLEVEL (compression level) + + The FCHECK value must be such that CMF and FLG, when viewed as + a 16-bit unsigned integer stored in MSB order (CMF*256 + FLG), + is a multiple of 31. + + + + +Deutsch & Gailly Informational [Page 5] + +RFC 1950 ZLIB Compressed Data Format Specification May 1996 + + + FDICT (Preset dictionary) + If FDICT is set, a DICT dictionary identifier is present + immediately after the FLG byte. The dictionary is a sequence of + bytes which are initially fed to the compressor without + producing any compressed output. DICT is the Adler-32 checksum + of this sequence of bytes (see the definition of ADLER32 + below). The decompressor can use this identifier to determine + which dictionary has been used by the compressor. + + FLEVEL (Compression level) + These flags are available for use by specific compression + methods. The "deflate" method (CM = 8) sets these flags as + follows: + + 0 - compressor used fastest algorithm + 1 - compressor used fast algorithm + 2 - compressor used default algorithm + 3 - compressor used maximum compression, slowest algorithm + + The information in FLEVEL is not needed for decompression; it + is there to indicate if recompression might be worthwhile. + + compressed data + For compression method 8, the compressed data is stored in the + deflate compressed data format as described in the document + "DEFLATE Compressed Data Format Specification" by L. Peter + Deutsch. (See reference [3] in Chapter 3, below) + + Other compressed data formats are not specified in this version + of the zlib specification. + + ADLER32 (Adler-32 checksum) + This contains a checksum value of the uncompressed data + (excluding any dictionary data) computed according to Adler-32 + algorithm. This algorithm is a 32-bit extension and improvement + of the Fletcher algorithm, used in the ITU-T X.224 / ISO 8073 + standard. See references [4] and [5] in Chapter 3, below) + + Adler-32 is composed of two sums accumulated per byte: s1 is + the sum of all bytes, s2 is the sum of all s1 values. Both sums + are done modulo 65521. s1 is initialized to 1, s2 to zero. The + Adler-32 checksum is stored as s2*65536 + s1 in most- + significant-byte first (network) order. + + + + + + + + +Deutsch & Gailly Informational [Page 6] + +RFC 1950 ZLIB Compressed Data Format Specification May 1996 + + + 2.3. Compliance + + A compliant compressor must produce streams with correct CMF, FLG + and ADLER32, but need not support preset dictionaries. When the + zlib data format is used as part of another standard data format, + the compressor may use only preset dictionaries that are specified + by this other data format. If this other format does not use the + preset dictionary feature, the compressor must not set the FDICT + flag. + + A compliant decompressor must check CMF, FLG, and ADLER32, and + provide an error indication if any of these have incorrect values. + A compliant decompressor must give an error indication if CM is + not one of the values defined in this specification (only the + value 8 is permitted in this version), since another value could + indicate the presence of new features that would cause subsequent + data to be interpreted incorrectly. A compliant decompressor must + give an error indication if FDICT is set and DICTID is not the + identifier of a known preset dictionary. A decompressor may + ignore FLEVEL and still be compliant. When the zlib data format + is being used as a part of another standard format, a compliant + decompressor must support all the preset dictionaries specified by + the other format. When the other format does not use the preset + dictionary feature, a compliant decompressor must reject any + stream in which the FDICT flag is set. + +3. References + + [1] Deutsch, L.P.,"GZIP Compressed Data Format Specification", + available in ftp://ftp.uu.net/pub/archiving/zip/doc/ + + [2] Thomas Boutell, "PNG (Portable Network Graphics) specification", + available in ftp://ftp.uu.net/graphics/png/documents/ + + [3] Deutsch, L.P.,"DEFLATE Compressed Data Format Specification", + available in ftp://ftp.uu.net/pub/archiving/zip/doc/ + + [4] Fletcher, J. G., "An Arithmetic Checksum for Serial + Transmissions," IEEE Transactions on Communications, Vol. COM-30, + No. 1, January 1982, pp. 247-252. + + [5] ITU-T Recommendation X.224, Annex D, "Checksum Algorithms," + November, 1993, pp. 144, 145. (Available from + gopher://info.itu.ch). ITU-T X.244 is also the same as ISO 8073. + + + + + + + +Deutsch & Gailly Informational [Page 7] + +RFC 1950 ZLIB Compressed Data Format Specification May 1996 + + +4. Source code + + Source code for a C language implementation of a "zlib" compliant + library is available at ftp://ftp.uu.net/pub/archiving/zip/zlib/. + +5. Security Considerations + + A decoder that fails to check the ADLER32 checksum value may be + subject to undetected data corruption. + +6. Acknowledgements + + Trademarks cited in this document are the property of their + respective owners. + + Jean-Loup Gailly and Mark Adler designed the zlib format and wrote + the related software described in this specification. Glenn + Randers-Pehrson converted this document to RFC and HTML format. + +7. Authors' Addresses + + L. Peter Deutsch + Aladdin Enterprises + 203 Santa Margarita Ave. + Menlo Park, CA 94025 + + Phone: (415) 322-0103 (AM only) + FAX: (415) 322-1734 + EMail: + + + Jean-Loup Gailly + + EMail: + + Questions about the technical content of this specification can be + sent by email to + + Jean-Loup Gailly and + Mark Adler + + Editorial comments on this specification can be sent by email to + + L. Peter Deutsch and + Glenn Randers-Pehrson + + + + + + +Deutsch & Gailly Informational [Page 8] + +RFC 1950 ZLIB Compressed Data Format Specification May 1996 + + +8. Appendix: Rationale + + 8.1. Preset dictionaries + + A preset dictionary is specially useful to compress short input + sequences. The compressor can take advantage of the dictionary + context to encode the input in a more compact manner. The + decompressor can be initialized with the appropriate context by + virtually decompressing a compressed version of the dictionary + without producing any output. However for certain compression + algorithms such as the deflate algorithm this operation can be + achieved without actually performing any decompression. + + The compressor and the decompressor must use exactly the same + dictionary. The dictionary may be fixed or may be chosen among a + certain number of predefined dictionaries, according to the kind + of input data. The decompressor can determine which dictionary has + been chosen by the compressor by checking the dictionary + identifier. This document does not specify the contents of + predefined dictionaries, since the optimal dictionaries are + application specific. Standard data formats using this feature of + the zlib specification must precisely define the allowed + dictionaries. + + 8.2. The Adler-32 algorithm + + The Adler-32 algorithm is much faster than the CRC32 algorithm yet + still provides an extremely low probability of undetected errors. + + The modulo on unsigned long accumulators can be delayed for 5552 + bytes, so the modulo operation time is negligible. If the bytes + are a, b, c, the second sum is 3a + 2b + c + 3, and so is position + and order sensitive, unlike the first sum, which is just a + checksum. That 65521 is prime is important to avoid a possible + large class of two-byte errors that leave the check unchanged. + (The Fletcher checksum uses 255, which is not prime and which also + makes the Fletcher check insensitive to single byte changes 0 <-> + 255.) + + The sum s1 is initialized to 1 instead of zero to make the length + of the sequence part of s2, so that the length does not have to be + checked separately. (Any sequence of zeroes has a Fletcher + checksum of zero.) + + + + + + + + +Deutsch & Gailly Informational [Page 9] + +RFC 1950 ZLIB Compressed Data Format Specification May 1996 + + +9. Appendix: Sample code + + The following C code computes the Adler-32 checksum of a data buffer. + It is written for clarity, not for speed. The sample code is in the + ANSI C programming language. Non C users may find it easier to read + with these hints: + + & Bitwise AND operator. + >> Bitwise right shift operator. When applied to an + unsigned quantity, as here, right shift inserts zero bit(s) + at the left. + << Bitwise left shift operator. Left shift inserts zero + bit(s) at the right. + ++ "n++" increments the variable n. + % modulo operator: a % b is the remainder of a divided by b. + + #define BASE 65521 /* largest prime smaller than 65536 */ + + /* + Update a running Adler-32 checksum with the bytes buf[0..len-1] + and return the updated checksum. The Adler-32 checksum should be + initialized to 1. + + Usage example: + + unsigned long adler = 1L; + + while (read_buffer(buffer, length) != EOF) { + adler = update_adler32(adler, buffer, length); + } + if (adler != original_adler) error(); + */ + unsigned long update_adler32(unsigned long adler, + unsigned char *buf, int len) + { + unsigned long s1 = adler & 0xffff; + unsigned long s2 = (adler >> 16) & 0xffff; + int n; + + for (n = 0; n < len; n++) { + s1 = (s1 + buf[n]) % BASE; + s2 = (s2 + s1) % BASE; + } + return (s2 << 16) + s1; + } + + /* Return the adler32 of the bytes buf[0..len-1] */ + + + + +Deutsch & Gailly Informational [Page 10] + +RFC 1950 ZLIB Compressed Data Format Specification May 1996 + + + unsigned long adler32(unsigned char *buf, int len) + { + return update_adler32(1L, buf, len); + } + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +Deutsch & Gailly Informational [Page 11] + diff --git a/software/scsi2sd-util/zlib-1.2.8/doc/rfc1951.txt b/software/scsi2sd-util/zlib-1.2.8/doc/rfc1951.txt new file mode 100644 index 0000000..403c8c7 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/doc/rfc1951.txt @@ -0,0 +1,955 @@ + + + + + + +Network Working Group P. Deutsch +Request for Comments: 1951 Aladdin Enterprises +Category: Informational May 1996 + + + DEFLATE Compressed Data Format Specification version 1.3 + +Status of This Memo + + This memo provides information for the Internet community. This memo + does not specify an Internet standard of any kind. Distribution of + this memo is unlimited. + +IESG Note: + + The IESG takes no position on the validity of any Intellectual + Property Rights statements contained in this document. + +Notices + + Copyright (c) 1996 L. Peter Deutsch + + Permission is granted to copy and distribute this document for any + purpose and without charge, including translations into other + languages and incorporation into compilations, provided that the + copyright notice and this notice are preserved, and that any + substantive changes or deletions from the original are clearly + marked. + + A pointer to the latest version of this and related documentation in + HTML format can be found at the URL + . + +Abstract + + This specification defines a lossless compressed data format that + compresses data using a combination of the LZ77 algorithm and Huffman + coding, with efficiency comparable to the best currently available + general-purpose compression methods. The data can be produced or + consumed, even for an arbitrarily long sequentially presented input + data stream, using only an a priori bounded amount of intermediate + storage. The format can be implemented readily in a manner not + covered by patents. + + + + + + + + +Deutsch Informational [Page 1] + +RFC 1951 DEFLATE Compressed Data Format Specification May 1996 + + +Table of Contents + + 1. Introduction ................................................... 2 + 1.1. Purpose ................................................... 2 + 1.2. Intended audience ......................................... 3 + 1.3. Scope ..................................................... 3 + 1.4. Compliance ................................................ 3 + 1.5. Definitions of terms and conventions used ................ 3 + 1.6. Changes from previous versions ............................ 4 + 2. Compressed representation overview ............................. 4 + 3. Detailed specification ......................................... 5 + 3.1. Overall conventions ....................................... 5 + 3.1.1. Packing into bytes .................................. 5 + 3.2. Compressed block format ................................... 6 + 3.2.1. Synopsis of prefix and Huffman coding ............... 6 + 3.2.2. Use of Huffman coding in the "deflate" format ....... 7 + 3.2.3. Details of block format ............................. 9 + 3.2.4. Non-compressed blocks (BTYPE=00) ................... 11 + 3.2.5. Compressed blocks (length and distance codes) ...... 11 + 3.2.6. Compression with fixed Huffman codes (BTYPE=01) .... 12 + 3.2.7. Compression with dynamic Huffman codes (BTYPE=10) .. 13 + 3.3. Compliance ............................................... 14 + 4. Compression algorithm details ................................. 14 + 5. References .................................................... 16 + 6. Security Considerations ....................................... 16 + 7. Source code ................................................... 16 + 8. Acknowledgements .............................................. 16 + 9. Author's Address .............................................. 17 + +1. Introduction + + 1.1. Purpose + + The purpose of this specification is to define a lossless + compressed data format that: + * Is independent of CPU type, operating system, file system, + and character set, and hence can be used for interchange; + * Can be produced or consumed, even for an arbitrarily long + sequentially presented input data stream, using only an a + priori bounded amount of intermediate storage, and hence + can be used in data communications or similar structures + such as Unix filters; + * Compresses data with efficiency comparable to the best + currently available general-purpose compression methods, + and in particular considerably better than the "compress" + program; + * Can be implemented readily in a manner not covered by + patents, and hence can be practiced freely; + + + +Deutsch Informational [Page 2] + +RFC 1951 DEFLATE Compressed Data Format Specification May 1996 + + + * Is compatible with the file format produced by the current + widely used gzip utility, in that conforming decompressors + will be able to read data produced by the existing gzip + compressor. + + The data format defined by this specification does not attempt to: + + * Allow random access to compressed data; + * Compress specialized data (e.g., raster graphics) as well + as the best currently available specialized algorithms. + + A simple counting argument shows that no lossless compression + algorithm can compress every possible input data set. For the + format defined here, the worst case expansion is 5 bytes per 32K- + byte block, i.e., a size increase of 0.015% for large data sets. + English text usually compresses by a factor of 2.5 to 3; + executable files usually compress somewhat less; graphical data + such as raster images may compress much more. + + 1.2. Intended audience + + This specification is intended for use by implementors of software + to compress data into "deflate" format and/or decompress data from + "deflate" format. + + The text of the specification assumes a basic background in + programming at the level of bits and other primitive data + representations. Familiarity with the technique of Huffman coding + is helpful but not required. + + 1.3. Scope + + The specification specifies a method for representing a sequence + of bytes as a (usually shorter) sequence of bits, and a method for + packing the latter bit sequence into bytes. + + 1.4. Compliance + + Unless otherwise indicated below, a compliant decompressor must be + able to accept and decompress any data set that conforms to all + the specifications presented here; a compliant compressor must + produce data sets that conform to all the specifications presented + here. + + 1.5. Definitions of terms and conventions used + + Byte: 8 bits stored or transmitted as a unit (same as an octet). + For this specification, a byte is exactly 8 bits, even on machines + + + +Deutsch Informational [Page 3] + +RFC 1951 DEFLATE Compressed Data Format Specification May 1996 + + + which store a character on a number of bits different from eight. + See below, for the numbering of bits within a byte. + + String: a sequence of arbitrary bytes. + + 1.6. Changes from previous versions + + There have been no technical changes to the deflate format since + version 1.1 of this specification. In version 1.2, some + terminology was changed. Version 1.3 is a conversion of the + specification to RFC style. + +2. Compressed representation overview + + A compressed data set consists of a series of blocks, corresponding + to successive blocks of input data. The block sizes are arbitrary, + except that non-compressible blocks are limited to 65,535 bytes. + + Each block is compressed using a combination of the LZ77 algorithm + and Huffman coding. The Huffman trees for each block are independent + of those for previous or subsequent blocks; the LZ77 algorithm may + use a reference to a duplicated string occurring in a previous block, + up to 32K input bytes before. + + Each block consists of two parts: a pair of Huffman code trees that + describe the representation of the compressed data part, and a + compressed data part. (The Huffman trees themselves are compressed + using Huffman encoding.) The compressed data consists of a series of + elements of two types: literal bytes (of strings that have not been + detected as duplicated within the previous 32K input bytes), and + pointers to duplicated strings, where a pointer is represented as a + pair . The representation used in the + "deflate" format limits distances to 32K bytes and lengths to 258 + bytes, but does not limit the size of a block, except for + uncompressible blocks, which are limited as noted above. + + Each type of value (literals, distances, and lengths) in the + compressed data is represented using a Huffman code, using one code + tree for literals and lengths and a separate code tree for distances. + The code trees for each block appear in a compact form just before + the compressed data for that block. + + + + + + + + + + +Deutsch Informational [Page 4] + +RFC 1951 DEFLATE Compressed Data Format Specification May 1996 + + +3. Detailed specification + + 3.1. Overall conventions In the diagrams below, a box like this: + + +---+ + | | <-- the vertical bars might be missing + +---+ + + represents one byte; a box like this: + + +==============+ + | | + +==============+ + + represents a variable number of bytes. + + Bytes stored within a computer do not have a "bit order", since + they are always treated as a unit. However, a byte considered as + an integer between 0 and 255 does have a most- and least- + significant bit, and since we write numbers with the most- + significant digit on the left, we also write bytes with the most- + significant bit on the left. In the diagrams below, we number the + bits of a byte so that bit 0 is the least-significant bit, i.e., + the bits are numbered: + + +--------+ + |76543210| + +--------+ + + Within a computer, a number may occupy multiple bytes. All + multi-byte numbers in the format described here are stored with + the least-significant byte first (at the lower memory address). + For example, the decimal number 520 is stored as: + + 0 1 + +--------+--------+ + |00001000|00000010| + +--------+--------+ + ^ ^ + | | + | + more significant byte = 2 x 256 + + less significant byte = 8 + + 3.1.1. Packing into bytes + + This document does not address the issue of the order in which + bits of a byte are transmitted on a bit-sequential medium, + since the final data format described here is byte- rather than + + + +Deutsch Informational [Page 5] + +RFC 1951 DEFLATE Compressed Data Format Specification May 1996 + + + bit-oriented. However, we describe the compressed block format + in below, as a sequence of data elements of various bit + lengths, not a sequence of bytes. We must therefore specify + how to pack these data elements into bytes to form the final + compressed byte sequence: + + * Data elements are packed into bytes in order of + increasing bit number within the byte, i.e., starting + with the least-significant bit of the byte. + * Data elements other than Huffman codes are packed + starting with the least-significant bit of the data + element. + * Huffman codes are packed starting with the most- + significant bit of the code. + + In other words, if one were to print out the compressed data as + a sequence of bytes, starting with the first byte at the + *right* margin and proceeding to the *left*, with the most- + significant bit of each byte on the left as usual, one would be + able to parse the result from right to left, with fixed-width + elements in the correct MSB-to-LSB order and Huffman codes in + bit-reversed order (i.e., with the first bit of the code in the + relative LSB position). + + 3.2. Compressed block format + + 3.2.1. Synopsis of prefix and Huffman coding + + Prefix coding represents symbols from an a priori known + alphabet by bit sequences (codes), one code for each symbol, in + a manner such that different symbols may be represented by bit + sequences of different lengths, but a parser can always parse + an encoded string unambiguously symbol-by-symbol. + + We define a prefix code in terms of a binary tree in which the + two edges descending from each non-leaf node are labeled 0 and + 1 and in which the leaf nodes correspond one-for-one with (are + labeled with) the symbols of the alphabet; then the code for a + symbol is the sequence of 0's and 1's on the edges leading from + the root to the leaf labeled with that symbol. For example: + + + + + + + + + + + +Deutsch Informational [Page 6] + +RFC 1951 DEFLATE Compressed Data Format Specification May 1996 + + + /\ Symbol Code + 0 1 ------ ---- + / \ A 00 + /\ B B 1 + 0 1 C 011 + / \ D 010 + A /\ + 0 1 + / \ + D C + + A parser can decode the next symbol from an encoded input + stream by walking down the tree from the root, at each step + choosing the edge corresponding to the next input bit. + + Given an alphabet with known symbol frequencies, the Huffman + algorithm allows the construction of an optimal prefix code + (one which represents strings with those symbol frequencies + using the fewest bits of any possible prefix codes for that + alphabet). Such a code is called a Huffman code. (See + reference [1] in Chapter 5, references for additional + information on Huffman codes.) + + Note that in the "deflate" format, the Huffman codes for the + various alphabets must not exceed certain maximum code lengths. + This constraint complicates the algorithm for computing code + lengths from symbol frequencies. Again, see Chapter 5, + references for details. + + 3.2.2. Use of Huffman coding in the "deflate" format + + The Huffman codes used for each alphabet in the "deflate" + format have two additional rules: + + * All codes of a given bit length have lexicographically + consecutive values, in the same order as the symbols + they represent; + + * Shorter codes lexicographically precede longer codes. + + + + + + + + + + + + +Deutsch Informational [Page 7] + +RFC 1951 DEFLATE Compressed Data Format Specification May 1996 + + + We could recode the example above to follow this rule as + follows, assuming that the order of the alphabet is ABCD: + + Symbol Code + ------ ---- + A 10 + B 0 + C 110 + D 111 + + I.e., 0 precedes 10 which precedes 11x, and 110 and 111 are + lexicographically consecutive. + + Given this rule, we can define the Huffman code for an alphabet + just by giving the bit lengths of the codes for each symbol of + the alphabet in order; this is sufficient to determine the + actual codes. In our example, the code is completely defined + by the sequence of bit lengths (2, 1, 3, 3). The following + algorithm generates the codes as integers, intended to be read + from most- to least-significant bit. The code lengths are + initially in tree[I].Len; the codes are produced in + tree[I].Code. + + 1) Count the number of codes for each code length. Let + bl_count[N] be the number of codes of length N, N >= 1. + + 2) Find the numerical value of the smallest code for each + code length: + + code = 0; + bl_count[0] = 0; + for (bits = 1; bits <= MAX_BITS; bits++) { + code = (code + bl_count[bits-1]) << 1; + next_code[bits] = code; + } + + 3) Assign numerical values to all codes, using consecutive + values for all codes of the same length with the base + values determined at step 2. Codes that are never used + (which have a bit length of zero) must not be assigned a + value. + + for (n = 0; n <= max_code; n++) { + len = tree[n].Len; + if (len != 0) { + tree[n].Code = next_code[len]; + next_code[len]++; + } + + + +Deutsch Informational [Page 8] + +RFC 1951 DEFLATE Compressed Data Format Specification May 1996 + + + } + + Example: + + Consider the alphabet ABCDEFGH, with bit lengths (3, 3, 3, 3, + 3, 2, 4, 4). After step 1, we have: + + N bl_count[N] + - ----------- + 2 1 + 3 5 + 4 2 + + Step 2 computes the following next_code values: + + N next_code[N] + - ------------ + 1 0 + 2 0 + 3 2 + 4 14 + + Step 3 produces the following code values: + + Symbol Length Code + ------ ------ ---- + A 3 010 + B 3 011 + C 3 100 + D 3 101 + E 3 110 + F 2 00 + G 4 1110 + H 4 1111 + + 3.2.3. Details of block format + + Each block of compressed data begins with 3 header bits + containing the following data: + + first bit BFINAL + next 2 bits BTYPE + + Note that the header bits do not necessarily begin on a byte + boundary, since a block does not necessarily occupy an integral + number of bytes. + + + + + +Deutsch Informational [Page 9] + +RFC 1951 DEFLATE Compressed Data Format Specification May 1996 + + + BFINAL is set if and only if this is the last block of the data + set. + + BTYPE specifies how the data are compressed, as follows: + + 00 - no compression + 01 - compressed with fixed Huffman codes + 10 - compressed with dynamic Huffman codes + 11 - reserved (error) + + The only difference between the two compressed cases is how the + Huffman codes for the literal/length and distance alphabets are + defined. + + In all cases, the decoding algorithm for the actual data is as + follows: + + do + read block header from input stream. + if stored with no compression + skip any remaining bits in current partially + processed byte + read LEN and NLEN (see next section) + copy LEN bytes of data to output + otherwise + if compressed with dynamic Huffman codes + read representation of code trees (see + subsection below) + loop (until end of block code recognized) + decode literal/length value from input stream + if value < 256 + copy value (literal byte) to output stream + otherwise + if value = end of block (256) + break from loop + otherwise (value = 257..285) + decode distance from input stream + + move backwards distance bytes in the output + stream, and copy length bytes from this + position to the output stream. + end loop + while not last block + + Note that a duplicated string reference may refer to a string + in a previous block; i.e., the backward distance may cross one + or more block boundaries. However a distance cannot refer past + the beginning of the output stream. (An application using a + + + +Deutsch Informational [Page 10] + +RFC 1951 DEFLATE Compressed Data Format Specification May 1996 + + + preset dictionary might discard part of the output stream; a + distance can refer to that part of the output stream anyway) + Note also that the referenced string may overlap the current + position; for example, if the last 2 bytes decoded have values + X and Y, a string reference with + adds X,Y,X,Y,X to the output stream. + + We now specify each compression method in turn. + + 3.2.4. Non-compressed blocks (BTYPE=00) + + Any bits of input up to the next byte boundary are ignored. + The rest of the block consists of the following information: + + 0 1 2 3 4... + +---+---+---+---+================================+ + | LEN | NLEN |... LEN bytes of literal data...| + +---+---+---+---+================================+ + + LEN is the number of data bytes in the block. NLEN is the + one's complement of LEN. + + 3.2.5. Compressed blocks (length and distance codes) + + As noted above, encoded data blocks in the "deflate" format + consist of sequences of symbols drawn from three conceptually + distinct alphabets: either literal bytes, from the alphabet of + byte values (0..255), or pairs, + where the length is drawn from (3..258) and the distance is + drawn from (1..32,768). In fact, the literal and length + alphabets are merged into a single alphabet (0..285), where + values 0..255 represent literal bytes, the value 256 indicates + end-of-block, and values 257..285 represent length codes + (possibly in conjunction with extra bits following the symbol + code) as follows: + + + + + + + + + + + + + + + + +Deutsch Informational [Page 11] + +RFC 1951 DEFLATE Compressed Data Format Specification May 1996 + + + Extra Extra Extra + Code Bits Length(s) Code Bits Lengths Code Bits Length(s) + ---- ---- ------ ---- ---- ------- ---- ---- ------- + 257 0 3 267 1 15,16 277 4 67-82 + 258 0 4 268 1 17,18 278 4 83-98 + 259 0 5 269 2 19-22 279 4 99-114 + 260 0 6 270 2 23-26 280 4 115-130 + 261 0 7 271 2 27-30 281 5 131-162 + 262 0 8 272 2 31-34 282 5 163-194 + 263 0 9 273 3 35-42 283 5 195-226 + 264 0 10 274 3 43-50 284 5 227-257 + 265 1 11,12 275 3 51-58 285 0 258 + 266 1 13,14 276 3 59-66 + + The extra bits should be interpreted as a machine integer + stored with the most-significant bit first, e.g., bits 1110 + represent the value 14. + + Extra Extra Extra + Code Bits Dist Code Bits Dist Code Bits Distance + ---- ---- ---- ---- ---- ------ ---- ---- -------- + 0 0 1 10 4 33-48 20 9 1025-1536 + 1 0 2 11 4 49-64 21 9 1537-2048 + 2 0 3 12 5 65-96 22 10 2049-3072 + 3 0 4 13 5 97-128 23 10 3073-4096 + 4 1 5,6 14 6 129-192 24 11 4097-6144 + 5 1 7,8 15 6 193-256 25 11 6145-8192 + 6 2 9-12 16 7 257-384 26 12 8193-12288 + 7 2 13-16 17 7 385-512 27 12 12289-16384 + 8 3 17-24 18 8 513-768 28 13 16385-24576 + 9 3 25-32 19 8 769-1024 29 13 24577-32768 + + 3.2.6. Compression with fixed Huffman codes (BTYPE=01) + + The Huffman codes for the two alphabets are fixed, and are not + represented explicitly in the data. The Huffman code lengths + for the literal/length alphabet are: + + Lit Value Bits Codes + --------- ---- ----- + 0 - 143 8 00110000 through + 10111111 + 144 - 255 9 110010000 through + 111111111 + 256 - 279 7 0000000 through + 0010111 + 280 - 287 8 11000000 through + 11000111 + + + +Deutsch Informational [Page 12] + +RFC 1951 DEFLATE Compressed Data Format Specification May 1996 + + + The code lengths are sufficient to generate the actual codes, + as described above; we show the codes in the table for added + clarity. Literal/length values 286-287 will never actually + occur in the compressed data, but participate in the code + construction. + + Distance codes 0-31 are represented by (fixed-length) 5-bit + codes, with possible additional bits as shown in the table + shown in Paragraph 3.2.5, above. Note that distance codes 30- + 31 will never actually occur in the compressed data. + + 3.2.7. Compression with dynamic Huffman codes (BTYPE=10) + + The Huffman codes for the two alphabets appear in the block + immediately after the header bits and before the actual + compressed data, first the literal/length code and then the + distance code. Each code is defined by a sequence of code + lengths, as discussed in Paragraph 3.2.2, above. For even + greater compactness, the code length sequences themselves are + compressed using a Huffman code. The alphabet for code lengths + is as follows: + + 0 - 15: Represent code lengths of 0 - 15 + 16: Copy the previous code length 3 - 6 times. + The next 2 bits indicate repeat length + (0 = 3, ... , 3 = 6) + Example: Codes 8, 16 (+2 bits 11), + 16 (+2 bits 10) will expand to + 12 code lengths of 8 (1 + 6 + 5) + 17: Repeat a code length of 0 for 3 - 10 times. + (3 bits of length) + 18: Repeat a code length of 0 for 11 - 138 times + (7 bits of length) + + A code length of 0 indicates that the corresponding symbol in + the literal/length or distance alphabet will not occur in the + block, and should not participate in the Huffman code + construction algorithm given earlier. If only one distance + code is used, it is encoded using one bit, not zero bits; in + this case there is a single code length of one, with one unused + code. One distance code of zero bits means that there are no + distance codes used at all (the data is all literals). + + We can now define the format of the block: + + 5 Bits: HLIT, # of Literal/Length codes - 257 (257 - 286) + 5 Bits: HDIST, # of Distance codes - 1 (1 - 32) + 4 Bits: HCLEN, # of Code Length codes - 4 (4 - 19) + + + +Deutsch Informational [Page 13] + +RFC 1951 DEFLATE Compressed Data Format Specification May 1996 + + + (HCLEN + 4) x 3 bits: code lengths for the code length + alphabet given just above, in the order: 16, 17, 18, + 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15 + + These code lengths are interpreted as 3-bit integers + (0-7); as above, a code length of 0 means the + corresponding symbol (literal/length or distance code + length) is not used. + + HLIT + 257 code lengths for the literal/length alphabet, + encoded using the code length Huffman code + + HDIST + 1 code lengths for the distance alphabet, + encoded using the code length Huffman code + + The actual compressed data of the block, + encoded using the literal/length and distance Huffman + codes + + The literal/length symbol 256 (end of data), + encoded using the literal/length Huffman code + + The code length repeat codes can cross from HLIT + 257 to the + HDIST + 1 code lengths. In other words, all code lengths form + a single sequence of HLIT + HDIST + 258 values. + + 3.3. Compliance + + A compressor may limit further the ranges of values specified in + the previous section and still be compliant; for example, it may + limit the range of backward pointers to some value smaller than + 32K. Similarly, a compressor may limit the size of blocks so that + a compressible block fits in memory. + + A compliant decompressor must accept the full range of possible + values defined in the previous section, and must accept blocks of + arbitrary size. + +4. Compression algorithm details + + While it is the intent of this document to define the "deflate" + compressed data format without reference to any particular + compression algorithm, the format is related to the compressed + formats produced by LZ77 (Lempel-Ziv 1977, see reference [2] below); + since many variations of LZ77 are patented, it is strongly + recommended that the implementor of a compressor follow the general + algorithm presented here, which is known not to be patented per se. + The material in this section is not part of the definition of the + + + +Deutsch Informational [Page 14] + +RFC 1951 DEFLATE Compressed Data Format Specification May 1996 + + + specification per se, and a compressor need not follow it in order to + be compliant. + + The compressor terminates a block when it determines that starting a + new block with fresh trees would be useful, or when the block size + fills up the compressor's block buffer. + + The compressor uses a chained hash table to find duplicated strings, + using a hash function that operates on 3-byte sequences. At any + given point during compression, let XYZ be the next 3 input bytes to + be examined (not necessarily all different, of course). First, the + compressor examines the hash chain for XYZ. If the chain is empty, + the compressor simply writes out X as a literal byte and advances one + byte in the input. If the hash chain is not empty, indicating that + the sequence XYZ (or, if we are unlucky, some other 3 bytes with the + same hash function value) has occurred recently, the compressor + compares all strings on the XYZ hash chain with the actual input data + sequence starting at the current point, and selects the longest + match. + + The compressor searches the hash chains starting with the most recent + strings, to favor small distances and thus take advantage of the + Huffman encoding. The hash chains are singly linked. There are no + deletions from the hash chains; the algorithm simply discards matches + that are too old. To avoid a worst-case situation, very long hash + chains are arbitrarily truncated at a certain length, determined by a + run-time parameter. + + To improve overall compression, the compressor optionally defers the + selection of matches ("lazy matching"): after a match of length N has + been found, the compressor searches for a longer match starting at + the next input byte. If it finds a longer match, it truncates the + previous match to a length of one (thus producing a single literal + byte) and then emits the longer match. Otherwise, it emits the + original match, and, as described above, advances N bytes before + continuing. + + Run-time parameters also control this "lazy match" procedure. If + compression ratio is most important, the compressor attempts a + complete second search regardless of the length of the first match. + In the normal case, if the current match is "long enough", the + compressor reduces the search for a longer match, thus speeding up + the process. If speed is most important, the compressor inserts new + strings in the hash table only when no match was found, or when the + match is not "too long". This degrades the compression ratio but + saves time since there are both fewer insertions and fewer searches. + + + + + +Deutsch Informational [Page 15] + +RFC 1951 DEFLATE Compressed Data Format Specification May 1996 + + +5. References + + [1] Huffman, D. A., "A Method for the Construction of Minimum + Redundancy Codes", Proceedings of the Institute of Radio + Engineers, September 1952, Volume 40, Number 9, pp. 1098-1101. + + [2] Ziv J., Lempel A., "A Universal Algorithm for Sequential Data + Compression", IEEE Transactions on Information Theory, Vol. 23, + No. 3, pp. 337-343. + + [3] Gailly, J.-L., and Adler, M., ZLIB documentation and sources, + available in ftp://ftp.uu.net/pub/archiving/zip/doc/ + + [4] Gailly, J.-L., and Adler, M., GZIP documentation and sources, + available as gzip-*.tar in ftp://prep.ai.mit.edu/pub/gnu/ + + [5] Schwartz, E. S., and Kallick, B. "Generating a canonical prefix + encoding." Comm. ACM, 7,3 (Mar. 1964), pp. 166-169. + + [6] Hirschberg and Lelewer, "Efficient decoding of prefix codes," + Comm. ACM, 33,4, April 1990, pp. 449-459. + +6. Security Considerations + + Any data compression method involves the reduction of redundancy in + the data. Consequently, any corruption of the data is likely to have + severe effects and be difficult to correct. Uncompressed text, on + the other hand, will probably still be readable despite the presence + of some corrupted bytes. + + It is recommended that systems using this data format provide some + means of validating the integrity of the compressed data. See + reference [3], for example. + +7. Source code + + Source code for a C language implementation of a "deflate" compliant + compressor and decompressor is available within the zlib package at + ftp://ftp.uu.net/pub/archiving/zip/zlib/. + +8. Acknowledgements + + Trademarks cited in this document are the property of their + respective owners. + + Phil Katz designed the deflate format. Jean-Loup Gailly and Mark + Adler wrote the related software described in this specification. + Glenn Randers-Pehrson converted this document to RFC and HTML format. + + + +Deutsch Informational [Page 16] + +RFC 1951 DEFLATE Compressed Data Format Specification May 1996 + + +9. Author's Address + + L. Peter Deutsch + Aladdin Enterprises + 203 Santa Margarita Ave. + Menlo Park, CA 94025 + + Phone: (415) 322-0103 (AM only) + FAX: (415) 322-1734 + EMail: + + Questions about the technical content of this specification can be + sent by email to: + + Jean-Loup Gailly and + Mark Adler + + Editorial comments on this specification can be sent by email to: + + L. Peter Deutsch and + Glenn Randers-Pehrson + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +Deutsch Informational [Page 17] + diff --git a/software/scsi2sd-util/zlib-1.2.8/doc/rfc1952.txt b/software/scsi2sd-util/zlib-1.2.8/doc/rfc1952.txt new file mode 100644 index 0000000..a8e51b4 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/doc/rfc1952.txt @@ -0,0 +1,675 @@ + + + + + + +Network Working Group P. Deutsch +Request for Comments: 1952 Aladdin Enterprises +Category: Informational May 1996 + + + GZIP file format specification version 4.3 + +Status of This Memo + + This memo provides information for the Internet community. This memo + does not specify an Internet standard of any kind. Distribution of + this memo is unlimited. + +IESG Note: + + The IESG takes no position on the validity of any Intellectual + Property Rights statements contained in this document. + +Notices + + Copyright (c) 1996 L. Peter Deutsch + + Permission is granted to copy and distribute this document for any + purpose and without charge, including translations into other + languages and incorporation into compilations, provided that the + copyright notice and this notice are preserved, and that any + substantive changes or deletions from the original are clearly + marked. + + A pointer to the latest version of this and related documentation in + HTML format can be found at the URL + . + +Abstract + + This specification defines a lossless compressed data format that is + compatible with the widely used GZIP utility. The format includes a + cyclic redundancy check value for detecting data corruption. The + format presently uses the DEFLATE method of compression but can be + easily extended to use other compression methods. The format can be + implemented readily in a manner not covered by patents. + + + + + + + + + + +Deutsch Informational [Page 1] + +RFC 1952 GZIP File Format Specification May 1996 + + +Table of Contents + + 1. Introduction ................................................... 2 + 1.1. Purpose ................................................... 2 + 1.2. Intended audience ......................................... 3 + 1.3. Scope ..................................................... 3 + 1.4. Compliance ................................................ 3 + 1.5. Definitions of terms and conventions used ................. 3 + 1.6. Changes from previous versions ............................ 3 + 2. Detailed specification ......................................... 4 + 2.1. Overall conventions ....................................... 4 + 2.2. File format ............................................... 5 + 2.3. Member format ............................................. 5 + 2.3.1. Member header and trailer ........................... 6 + 2.3.1.1. Extra field ................................... 8 + 2.3.1.2. Compliance .................................... 9 + 3. References .................................................. 9 + 4. Security Considerations .................................... 10 + 5. Acknowledgements ........................................... 10 + 6. Author's Address ........................................... 10 + 7. Appendix: Jean-Loup Gailly's gzip utility .................. 11 + 8. Appendix: Sample CRC Code .................................. 11 + +1. Introduction + + 1.1. Purpose + + The purpose of this specification is to define a lossless + compressed data format that: + + * Is independent of CPU type, operating system, file system, + and character set, and hence can be used for interchange; + * Can compress or decompress a data stream (as opposed to a + randomly accessible file) to produce another data stream, + using only an a priori bounded amount of intermediate + storage, and hence can be used in data communications or + similar structures such as Unix filters; + * Compresses data with efficiency comparable to the best + currently available general-purpose compression methods, + and in particular considerably better than the "compress" + program; + * Can be implemented readily in a manner not covered by + patents, and hence can be practiced freely; + * Is compatible with the file format produced by the current + widely used gzip utility, in that conforming decompressors + will be able to read data produced by the existing gzip + compressor. + + + + +Deutsch Informational [Page 2] + +RFC 1952 GZIP File Format Specification May 1996 + + + The data format defined by this specification does not attempt to: + + * Provide random access to compressed data; + * Compress specialized data (e.g., raster graphics) as well as + the best currently available specialized algorithms. + + 1.2. Intended audience + + This specification is intended for use by implementors of software + to compress data into gzip format and/or decompress data from gzip + format. + + The text of the specification assumes a basic background in + programming at the level of bits and other primitive data + representations. + + 1.3. Scope + + The specification specifies a compression method and a file format + (the latter assuming only that a file can store a sequence of + arbitrary bytes). It does not specify any particular interface to + a file system or anything about character sets or encodings + (except for file names and comments, which are optional). + + 1.4. Compliance + + Unless otherwise indicated below, a compliant decompressor must be + able to accept and decompress any file that conforms to all the + specifications presented here; a compliant compressor must produce + files that conform to all the specifications presented here. The + material in the appendices is not part of the specification per se + and is not relevant to compliance. + + 1.5. Definitions of terms and conventions used + + byte: 8 bits stored or transmitted as a unit (same as an octet). + (For this specification, a byte is exactly 8 bits, even on + machines which store a character on a number of bits different + from 8.) See below for the numbering of bits within a byte. + + 1.6. Changes from previous versions + + There have been no technical changes to the gzip format since + version 4.1 of this specification. In version 4.2, some + terminology was changed, and the sample CRC code was rewritten for + clarity and to eliminate the requirement for the caller to do pre- + and post-conditioning. Version 4.3 is a conversion of the + specification to RFC style. + + + +Deutsch Informational [Page 3] + +RFC 1952 GZIP File Format Specification May 1996 + + +2. Detailed specification + + 2.1. Overall conventions + + In the diagrams below, a box like this: + + +---+ + | | <-- the vertical bars might be missing + +---+ + + represents one byte; a box like this: + + +==============+ + | | + +==============+ + + represents a variable number of bytes. + + Bytes stored within a computer do not have a "bit order", since + they are always treated as a unit. However, a byte considered as + an integer between 0 and 255 does have a most- and least- + significant bit, and since we write numbers with the most- + significant digit on the left, we also write bytes with the most- + significant bit on the left. In the diagrams below, we number the + bits of a byte so that bit 0 is the least-significant bit, i.e., + the bits are numbered: + + +--------+ + |76543210| + +--------+ + + This document does not address the issue of the order in which + bits of a byte are transmitted on a bit-sequential medium, since + the data format described here is byte- rather than bit-oriented. + + Within a computer, a number may occupy multiple bytes. All + multi-byte numbers in the format described here are stored with + the least-significant byte first (at the lower memory address). + For example, the decimal number 520 is stored as: + + 0 1 + +--------+--------+ + |00001000|00000010| + +--------+--------+ + ^ ^ + | | + | + more significant byte = 2 x 256 + + less significant byte = 8 + + + +Deutsch Informational [Page 4] + +RFC 1952 GZIP File Format Specification May 1996 + + + 2.2. File format + + A gzip file consists of a series of "members" (compressed data + sets). The format of each member is specified in the following + section. The members simply appear one after another in the file, + with no additional information before, between, or after them. + + 2.3. Member format + + Each member has the following structure: + + +---+---+---+---+---+---+---+---+---+---+ + |ID1|ID2|CM |FLG| MTIME |XFL|OS | (more-->) + +---+---+---+---+---+---+---+---+---+---+ + + (if FLG.FEXTRA set) + + +---+---+=================================+ + | XLEN |...XLEN bytes of "extra field"...| (more-->) + +---+---+=================================+ + + (if FLG.FNAME set) + + +=========================================+ + |...original file name, zero-terminated...| (more-->) + +=========================================+ + + (if FLG.FCOMMENT set) + + +===================================+ + |...file comment, zero-terminated...| (more-->) + +===================================+ + + (if FLG.FHCRC set) + + +---+---+ + | CRC16 | + +---+---+ + + +=======================+ + |...compressed blocks...| (more-->) + +=======================+ + + 0 1 2 3 4 5 6 7 + +---+---+---+---+---+---+---+---+ + | CRC32 | ISIZE | + +---+---+---+---+---+---+---+---+ + + + + +Deutsch Informational [Page 5] + +RFC 1952 GZIP File Format Specification May 1996 + + + 2.3.1. Member header and trailer + + ID1 (IDentification 1) + ID2 (IDentification 2) + These have the fixed values ID1 = 31 (0x1f, \037), ID2 = 139 + (0x8b, \213), to identify the file as being in gzip format. + + CM (Compression Method) + This identifies the compression method used in the file. CM + = 0-7 are reserved. CM = 8 denotes the "deflate" + compression method, which is the one customarily used by + gzip and which is documented elsewhere. + + FLG (FLaGs) + This flag byte is divided into individual bits as follows: + + bit 0 FTEXT + bit 1 FHCRC + bit 2 FEXTRA + bit 3 FNAME + bit 4 FCOMMENT + bit 5 reserved + bit 6 reserved + bit 7 reserved + + If FTEXT is set, the file is probably ASCII text. This is + an optional indication, which the compressor may set by + checking a small amount of the input data to see whether any + non-ASCII characters are present. In case of doubt, FTEXT + is cleared, indicating binary data. For systems which have + different file formats for ascii text and binary data, the + decompressor can use FTEXT to choose the appropriate format. + We deliberately do not specify the algorithm used to set + this bit, since a compressor always has the option of + leaving it cleared and a decompressor always has the option + of ignoring it and letting some other program handle issues + of data conversion. + + If FHCRC is set, a CRC16 for the gzip header is present, + immediately before the compressed data. The CRC16 consists + of the two least significant bytes of the CRC32 for all + bytes of the gzip header up to and not including the CRC16. + [The FHCRC bit was never set by versions of gzip up to + 1.2.4, even though it was documented with a different + meaning in gzip 1.2.4.] + + If FEXTRA is set, optional extra fields are present, as + described in a following section. + + + +Deutsch Informational [Page 6] + +RFC 1952 GZIP File Format Specification May 1996 + + + If FNAME is set, an original file name is present, + terminated by a zero byte. The name must consist of ISO + 8859-1 (LATIN-1) characters; on operating systems using + EBCDIC or any other character set for file names, the name + must be translated to the ISO LATIN-1 character set. This + is the original name of the file being compressed, with any + directory components removed, and, if the file being + compressed is on a file system with case insensitive names, + forced to lower case. There is no original file name if the + data was compressed from a source other than a named file; + for example, if the source was stdin on a Unix system, there + is no file name. + + If FCOMMENT is set, a zero-terminated file comment is + present. This comment is not interpreted; it is only + intended for human consumption. The comment must consist of + ISO 8859-1 (LATIN-1) characters. Line breaks should be + denoted by a single line feed character (10 decimal). + + Reserved FLG bits must be zero. + + MTIME (Modification TIME) + This gives the most recent modification time of the original + file being compressed. The time is in Unix format, i.e., + seconds since 00:00:00 GMT, Jan. 1, 1970. (Note that this + may cause problems for MS-DOS and other systems that use + local rather than Universal time.) If the compressed data + did not come from a file, MTIME is set to the time at which + compression started. MTIME = 0 means no time stamp is + available. + + XFL (eXtra FLags) + These flags are available for use by specific compression + methods. The "deflate" method (CM = 8) sets these flags as + follows: + + XFL = 2 - compressor used maximum compression, + slowest algorithm + XFL = 4 - compressor used fastest algorithm + + OS (Operating System) + This identifies the type of file system on which compression + took place. This may be useful in determining end-of-line + convention for text files. The currently defined values are + as follows: + + + + + + +Deutsch Informational [Page 7] + +RFC 1952 GZIP File Format Specification May 1996 + + + 0 - FAT filesystem (MS-DOS, OS/2, NT/Win32) + 1 - Amiga + 2 - VMS (or OpenVMS) + 3 - Unix + 4 - VM/CMS + 5 - Atari TOS + 6 - HPFS filesystem (OS/2, NT) + 7 - Macintosh + 8 - Z-System + 9 - CP/M + 10 - TOPS-20 + 11 - NTFS filesystem (NT) + 12 - QDOS + 13 - Acorn RISCOS + 255 - unknown + + XLEN (eXtra LENgth) + If FLG.FEXTRA is set, this gives the length of the optional + extra field. See below for details. + + CRC32 (CRC-32) + This contains a Cyclic Redundancy Check value of the + uncompressed data computed according to CRC-32 algorithm + used in the ISO 3309 standard and in section 8.1.1.6.2 of + ITU-T recommendation V.42. (See http://www.iso.ch for + ordering ISO documents. See gopher://info.itu.ch for an + online version of ITU-T V.42.) + + ISIZE (Input SIZE) + This contains the size of the original (uncompressed) input + data modulo 2^32. + + 2.3.1.1. Extra field + + If the FLG.FEXTRA bit is set, an "extra field" is present in + the header, with total length XLEN bytes. It consists of a + series of subfields, each of the form: + + +---+---+---+---+==================================+ + |SI1|SI2| LEN |... LEN bytes of subfield data ...| + +---+---+---+---+==================================+ + + SI1 and SI2 provide a subfield ID, typically two ASCII letters + with some mnemonic value. Jean-Loup Gailly + is maintaining a registry of subfield + IDs; please send him any subfield ID you wish to use. Subfield + IDs with SI2 = 0 are reserved for future use. The following + IDs are currently defined: + + + +Deutsch Informational [Page 8] + +RFC 1952 GZIP File Format Specification May 1996 + + + SI1 SI2 Data + ---------- ---------- ---- + 0x41 ('A') 0x70 ('P') Apollo file type information + + LEN gives the length of the subfield data, excluding the 4 + initial bytes. + + 2.3.1.2. Compliance + + A compliant compressor must produce files with correct ID1, + ID2, CM, CRC32, and ISIZE, but may set all the other fields in + the fixed-length part of the header to default values (255 for + OS, 0 for all others). The compressor must set all reserved + bits to zero. + + A compliant decompressor must check ID1, ID2, and CM, and + provide an error indication if any of these have incorrect + values. It must examine FEXTRA/XLEN, FNAME, FCOMMENT and FHCRC + at least so it can skip over the optional fields if they are + present. It need not examine any other part of the header or + trailer; in particular, a decompressor may ignore FTEXT and OS + and always produce binary output, and still be compliant. A + compliant decompressor must give an error indication if any + reserved bit is non-zero, since such a bit could indicate the + presence of a new field that would cause subsequent data to be + interpreted incorrectly. + +3. References + + [1] "Information Processing - 8-bit single-byte coded graphic + character sets - Part 1: Latin alphabet No.1" (ISO 8859-1:1987). + The ISO 8859-1 (Latin-1) character set is a superset of 7-bit + ASCII. Files defining this character set are available as + iso_8859-1.* in ftp://ftp.uu.net/graphics/png/documents/ + + [2] ISO 3309 + + [3] ITU-T recommendation V.42 + + [4] Deutsch, L.P.,"DEFLATE Compressed Data Format Specification", + available in ftp://ftp.uu.net/pub/archiving/zip/doc/ + + [5] Gailly, J.-L., GZIP documentation, available as gzip-*.tar in + ftp://prep.ai.mit.edu/pub/gnu/ + + [6] Sarwate, D.V., "Computation of Cyclic Redundancy Checks via Table + Look-Up", Communications of the ACM, 31(8), pp.1008-1013. + + + + +Deutsch Informational [Page 9] + +RFC 1952 GZIP File Format Specification May 1996 + + + [7] Schwaderer, W.D., "CRC Calculation", April 85 PC Tech Journal, + pp.118-133. + + [8] ftp://ftp.adelaide.edu.au/pub/rocksoft/papers/crc_v3.txt, + describing the CRC concept. + +4. Security Considerations + + Any data compression method involves the reduction of redundancy in + the data. Consequently, any corruption of the data is likely to have + severe effects and be difficult to correct. Uncompressed text, on + the other hand, will probably still be readable despite the presence + of some corrupted bytes. + + It is recommended that systems using this data format provide some + means of validating the integrity of the compressed data, such as by + setting and checking the CRC-32 check value. + +5. Acknowledgements + + Trademarks cited in this document are the property of their + respective owners. + + Jean-Loup Gailly designed the gzip format and wrote, with Mark Adler, + the related software described in this specification. Glenn + Randers-Pehrson converted this document to RFC and HTML format. + +6. Author's Address + + L. Peter Deutsch + Aladdin Enterprises + 203 Santa Margarita Ave. + Menlo Park, CA 94025 + + Phone: (415) 322-0103 (AM only) + FAX: (415) 322-1734 + EMail: + + Questions about the technical content of this specification can be + sent by email to: + + Jean-Loup Gailly and + Mark Adler + + Editorial comments on this specification can be sent by email to: + + L. Peter Deutsch and + Glenn Randers-Pehrson + + + +Deutsch Informational [Page 10] + +RFC 1952 GZIP File Format Specification May 1996 + + +7. Appendix: Jean-Loup Gailly's gzip utility + + The most widely used implementation of gzip compression, and the + original documentation on which this specification is based, were + created by Jean-Loup Gailly . Since this + implementation is a de facto standard, we mention some more of its + features here. Again, the material in this section is not part of + the specification per se, and implementations need not follow it to + be compliant. + + When compressing or decompressing a file, gzip preserves the + protection, ownership, and modification time attributes on the local + file system, since there is no provision for representing protection + attributes in the gzip file format itself. Since the file format + includes a modification time, the gzip decompressor provides a + command line switch that assigns the modification time from the file, + rather than the local modification time of the compressed input, to + the decompressed output. + +8. Appendix: Sample CRC Code + + The following sample code represents a practical implementation of + the CRC (Cyclic Redundancy Check). (See also ISO 3309 and ITU-T V.42 + for a formal specification.) + + The sample code is in the ANSI C programming language. Non C users + may find it easier to read with these hints: + + & Bitwise AND operator. + ^ Bitwise exclusive-OR operator. + >> Bitwise right shift operator. When applied to an + unsigned quantity, as here, right shift inserts zero + bit(s) at the left. + ! Logical NOT operator. + ++ "n++" increments the variable n. + 0xNNN 0x introduces a hexadecimal (base 16) constant. + Suffix L indicates a long value (at least 32 bits). + + /* Table of CRCs of all 8-bit messages. */ + unsigned long crc_table[256]; + + /* Flag: has the table been computed? Initially false. */ + int crc_table_computed = 0; + + /* Make the table for a fast CRC. */ + void make_crc_table(void) + { + unsigned long c; + + + +Deutsch Informational [Page 11] + +RFC 1952 GZIP File Format Specification May 1996 + + + int n, k; + for (n = 0; n < 256; n++) { + c = (unsigned long) n; + for (k = 0; k < 8; k++) { + if (c & 1) { + c = 0xedb88320L ^ (c >> 1); + } else { + c = c >> 1; + } + } + crc_table[n] = c; + } + crc_table_computed = 1; + } + + /* + Update a running crc with the bytes buf[0..len-1] and return + the updated crc. The crc should be initialized to zero. Pre- and + post-conditioning (one's complement) is performed within this + function so it shouldn't be done by the caller. Usage example: + + unsigned long crc = 0L; + + while (read_buffer(buffer, length) != EOF) { + crc = update_crc(crc, buffer, length); + } + if (crc != original_crc) error(); + */ + unsigned long update_crc(unsigned long crc, + unsigned char *buf, int len) + { + unsigned long c = crc ^ 0xffffffffL; + int n; + + if (!crc_table_computed) + make_crc_table(); + for (n = 0; n < len; n++) { + c = crc_table[(c ^ buf[n]) & 0xff] ^ (c >> 8); + } + return c ^ 0xffffffffL; + } + + /* Return the CRC of the bytes buf[0..len-1]. */ + unsigned long crc(unsigned char *buf, int len) + { + return update_crc(0L, buf, len); + } + + + + +Deutsch Informational [Page 12] + diff --git a/software/scsi2sd-util/zlib-1.2.8/doc/txtvsbin.txt b/software/scsi2sd-util/zlib-1.2.8/doc/txtvsbin.txt new file mode 100644 index 0000000..3d0f063 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/doc/txtvsbin.txt @@ -0,0 +1,107 @@ +A Fast Method for Identifying Plain Text Files +============================================== + + +Introduction +------------ + +Given a file coming from an unknown source, it is sometimes desirable +to find out whether the format of that file is plain text. Although +this may appear like a simple task, a fully accurate detection of the +file type requires heavy-duty semantic analysis on the file contents. +It is, however, possible to obtain satisfactory results by employing +various heuristics. + +Previous versions of PKZip and other zip-compatible compression tools +were using a crude detection scheme: if more than 80% (4/5) of the bytes +found in a certain buffer are within the range [7..127], the file is +labeled as plain text, otherwise it is labeled as binary. A prominent +limitation of this scheme is the restriction to Latin-based alphabets. +Other alphabets, like Greek, Cyrillic or Asian, make extensive use of +the bytes within the range [128..255], and texts using these alphabets +are most often misidentified by this scheme; in other words, the rate +of false negatives is sometimes too high, which means that the recall +is low. Another weakness of this scheme is a reduced precision, due to +the false positives that may occur when binary files containing large +amounts of textual characters are misidentified as plain text. + +In this article we propose a new, simple detection scheme that features +a much increased precision and a near-100% recall. This scheme is +designed to work on ASCII, Unicode and other ASCII-derived alphabets, +and it handles single-byte encodings (ISO-8859, MacRoman, KOI8, etc.) +and variable-sized encodings (ISO-2022, UTF-8, etc.). Wider encodings +(UCS-2/UTF-16 and UCS-4/UTF-32) are not handled, however. + + +The Algorithm +------------- + +The algorithm works by dividing the set of bytecodes [0..255] into three +categories: +- The white list of textual bytecodes: + 9 (TAB), 10 (LF), 13 (CR), 32 (SPACE) to 255. +- The gray list of tolerated bytecodes: + 7 (BEL), 8 (BS), 11 (VT), 12 (FF), 26 (SUB), 27 (ESC). +- The black list of undesired, non-textual bytecodes: + 0 (NUL) to 6, 14 to 31. + +If a file contains at least one byte that belongs to the white list and +no byte that belongs to the black list, then the file is categorized as +plain text; otherwise, it is categorized as binary. (The boundary case, +when the file is empty, automatically falls into the latter category.) + + +Rationale +--------- + +The idea behind this algorithm relies on two observations. + +The first observation is that, although the full range of 7-bit codes +[0..127] is properly specified by the ASCII standard, most control +characters in the range [0..31] are not used in practice. The only +widely-used, almost universally-portable control codes are 9 (TAB), +10 (LF) and 13 (CR). There are a few more control codes that are +recognized on a reduced range of platforms and text viewers/editors: +7 (BEL), 8 (BS), 11 (VT), 12 (FF), 26 (SUB) and 27 (ESC); but these +codes are rarely (if ever) used alone, without being accompanied by +some printable text. Even the newer, portable text formats such as +XML avoid using control characters outside the list mentioned here. + +The second observation is that most of the binary files tend to contain +control characters, especially 0 (NUL). Even though the older text +detection schemes observe the presence of non-ASCII codes from the range +[128..255], the precision rarely has to suffer if this upper range is +labeled as textual, because the files that are genuinely binary tend to +contain both control characters and codes from the upper range. On the +other hand, the upper range needs to be labeled as textual, because it +is used by virtually all ASCII extensions. In particular, this range is +used for encoding non-Latin scripts. + +Since there is no counting involved, other than simply observing the +presence or the absence of some byte values, the algorithm produces +consistent results, regardless what alphabet encoding is being used. +(If counting were involved, it could be possible to obtain different +results on a text encoded, say, using ISO-8859-16 versus UTF-8.) + +There is an extra category of plain text files that are "polluted" with +one or more black-listed codes, either by mistake or by peculiar design +considerations. In such cases, a scheme that tolerates a small fraction +of black-listed codes would provide an increased recall (i.e. more true +positives). This, however, incurs a reduced precision overall, since +false positives are more likely to appear in binary files that contain +large chunks of textual data. Furthermore, "polluted" plain text should +be regarded as binary by general-purpose text detection schemes, because +general-purpose text processing algorithms might not be applicable. +Under this premise, it is safe to say that our detection method provides +a near-100% recall. + +Experiments have been run on many files coming from various platforms +and applications. We tried plain text files, system logs, source code, +formatted office documents, compiled object code, etc. The results +confirm the optimistic assumptions about the capabilities of this +algorithm. + + +-- +Cosmin Truta +Last updated: 2006-May-28 diff --git a/software/scsi2sd-util/zlib-1.2.8/examples/README.examples b/software/scsi2sd-util/zlib-1.2.8/examples/README.examples new file mode 100644 index 0000000..56a3171 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/examples/README.examples @@ -0,0 +1,49 @@ +This directory contains examples of the use of zlib and other relevant +programs and documentation. + +enough.c + calculation and justification of ENOUGH parameter in inftrees.h + - calculates the maximum table space used in inflate tree + construction over all possible Huffman codes + +fitblk.c + compress just enough input to nearly fill a requested output size + - zlib isn't designed to do this, but fitblk does it anyway + +gun.c + uncompress a gzip file + - illustrates the use of inflateBack() for high speed file-to-file + decompression using call-back functions + - is approximately twice as fast as gzip -d + - also provides Unix uncompress functionality, again twice as fast + +gzappend.c + append to a gzip file + - illustrates the use of the Z_BLOCK flush parameter for inflate() + - illustrates the use of deflatePrime() to start at any bit + +gzjoin.c + join gzip files without recalculating the crc or recompressing + - illustrates the use of the Z_BLOCK flush parameter for inflate() + - illustrates the use of crc32_combine() + +gzlog.c +gzlog.h + efficiently and robustly maintain a message log file in gzip format + - illustrates use of raw deflate, Z_PARTIAL_FLUSH, deflatePrime(), + and deflateSetDictionary() + - illustrates use of a gzip header extra field + +zlib_how.html + painfully comprehensive description of zpipe.c (see below) + - describes in excruciating detail the use of deflate() and inflate() + +zpipe.c + reads and writes zlib streams from stdin to stdout + - illustrates the proper use of deflate() and inflate() + - deeply commented in zlib_how.html (see above) + +zran.c + index a zlib or gzip stream and randomly access it + - illustrates the use of Z_BLOCK, inflatePrime(), and + inflateSetDictionary() to provide random access diff --git a/software/scsi2sd-util/zlib-1.2.8/examples/enough.c b/software/scsi2sd-util/zlib-1.2.8/examples/enough.c new file mode 100644 index 0000000..b991144 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/examples/enough.c @@ -0,0 +1,572 @@ +/* enough.c -- determine the maximum size of inflate's Huffman code tables over + * all possible valid and complete Huffman codes, subject to a length limit. + * Copyright (C) 2007, 2008, 2012 Mark Adler + * Version 1.4 18 August 2012 Mark Adler + */ + +/* Version history: + 1.0 3 Jan 2007 First version (derived from codecount.c version 1.4) + 1.1 4 Jan 2007 Use faster incremental table usage computation + Prune examine() search on previously visited states + 1.2 5 Jan 2007 Comments clean up + As inflate does, decrease root for short codes + Refuse cases where inflate would increase root + 1.3 17 Feb 2008 Add argument for initial root table size + Fix bug for initial root table size == max - 1 + Use a macro to compute the history index + 1.4 18 Aug 2012 Avoid shifts more than bits in type (caused endless loop!) + Clean up comparisons of different types + Clean up code indentation + */ + +/* + Examine all possible Huffman codes for a given number of symbols and a + maximum code length in bits to determine the maximum table size for zilb's + inflate. Only complete Huffman codes are counted. + + Two codes are considered distinct if the vectors of the number of codes per + length are not identical. So permutations of the symbol assignments result + in the same code for the counting, as do permutations of the assignments of + the bit values to the codes (i.e. only canonical codes are counted). + + We build a code from shorter to longer lengths, determining how many symbols + are coded at each length. At each step, we have how many symbols remain to + be coded, what the last code length used was, and how many bit patterns of + that length remain unused. Then we add one to the code length and double the + number of unused patterns to graduate to the next code length. We then + assign all portions of the remaining symbols to that code length that + preserve the properties of a correct and eventually complete code. Those + properties are: we cannot use more bit patterns than are available; and when + all the symbols are used, there are exactly zero possible bit patterns + remaining. + + The inflate Huffman decoding algorithm uses two-level lookup tables for + speed. There is a single first-level table to decode codes up to root bits + in length (root == 9 in the current inflate implementation). The table + has 1 << root entries and is indexed by the next root bits of input. Codes + shorter than root bits have replicated table entries, so that the correct + entry is pointed to regardless of the bits that follow the short code. If + the code is longer than root bits, then the table entry points to a second- + level table. The size of that table is determined by the longest code with + that root-bit prefix. If that longest code has length len, then the table + has size 1 << (len - root), to index the remaining bits in that set of + codes. Each subsequent root-bit prefix then has its own sub-table. The + total number of table entries required by the code is calculated + incrementally as the number of codes at each bit length is populated. When + all of the codes are shorter than root bits, then root is reduced to the + longest code length, resulting in a single, smaller, one-level table. + + The inflate algorithm also provides for small values of root (relative to + the log2 of the number of symbols), where the shortest code has more bits + than root. In that case, root is increased to the length of the shortest + code. This program, by design, does not handle that case, so it is verified + that the number of symbols is less than 2^(root + 1). + + In order to speed up the examination (by about ten orders of magnitude for + the default arguments), the intermediate states in the build-up of a code + are remembered and previously visited branches are pruned. The memory + required for this will increase rapidly with the total number of symbols and + the maximum code length in bits. However this is a very small price to pay + for the vast speedup. + + First, all of the possible Huffman codes are counted, and reachable + intermediate states are noted by a non-zero count in a saved-results array. + Second, the intermediate states that lead to (root + 1) bit or longer codes + are used to look at all sub-codes from those junctures for their inflate + memory usage. (The amount of memory used is not affected by the number of + codes of root bits or less in length.) Third, the visited states in the + construction of those sub-codes and the associated calculation of the table + size is recalled in order to avoid recalculating from the same juncture. + Beginning the code examination at (root + 1) bit codes, which is enabled by + identifying the reachable nodes, accounts for about six of the orders of + magnitude of improvement for the default arguments. About another four + orders of magnitude come from not revisiting previous states. Out of + approximately 2x10^16 possible Huffman codes, only about 2x10^6 sub-codes + need to be examined to cover all of the possible table memory usage cases + for the default arguments of 286 symbols limited to 15-bit codes. + + Note that an unsigned long long type is used for counting. It is quite easy + to exceed the capacity of an eight-byte integer with a large number of + symbols and a large maximum code length, so multiple-precision arithmetic + would need to replace the unsigned long long arithmetic in that case. This + program will abort if an overflow occurs. The big_t type identifies where + the counting takes place. + + An unsigned long long type is also used for calculating the number of + possible codes remaining at the maximum length. This limits the maximum + code length to the number of bits in a long long minus the number of bits + needed to represent the symbols in a flat code. The code_t type identifies + where the bit pattern counting takes place. + */ + +#include +#include +#include +#include + +#define local static + +/* special data types */ +typedef unsigned long long big_t; /* type for code counting */ +typedef unsigned long long code_t; /* type for bit pattern counting */ +struct tab { /* type for been here check */ + size_t len; /* length of bit vector in char's */ + char *vec; /* allocated bit vector */ +}; + +/* The array for saving results, num[], is indexed with this triplet: + + syms: number of symbols remaining to code + left: number of available bit patterns at length len + len: number of bits in the codes currently being assigned + + Those indices are constrained thusly when saving results: + + syms: 3..totsym (totsym == total symbols to code) + left: 2..syms - 1, but only the evens (so syms == 8 -> 2, 4, 6) + len: 1..max - 1 (max == maximum code length in bits) + + syms == 2 is not saved since that immediately leads to a single code. left + must be even, since it represents the number of available bit patterns at + the current length, which is double the number at the previous length. + left ends at syms-1 since left == syms immediately results in a single code. + (left > sym is not allowed since that would result in an incomplete code.) + len is less than max, since the code completes immediately when len == max. + + The offset into the array is calculated for the three indices with the + first one (syms) being outermost, and the last one (len) being innermost. + We build the array with length max-1 lists for the len index, with syms-3 + of those for each symbol. There are totsym-2 of those, with each one + varying in length as a function of sym. See the calculation of index in + count() for the index, and the calculation of size in main() for the size + of the array. + + For the deflate example of 286 symbols limited to 15-bit codes, the array + has 284,284 entries, taking up 2.17 MB for an 8-byte big_t. More than + half of the space allocated for saved results is actually used -- not all + possible triplets are reached in the generation of valid Huffman codes. + */ + +/* The array for tracking visited states, done[], is itself indexed identically + to the num[] array as described above for the (syms, left, len) triplet. + Each element in the array is further indexed by the (mem, rem) doublet, + where mem is the amount of inflate table space used so far, and rem is the + remaining unused entries in the current inflate sub-table. Each indexed + element is simply one bit indicating whether the state has been visited or + not. Since the ranges for mem and rem are not known a priori, each bit + vector is of a variable size, and grows as needed to accommodate the visited + states. mem and rem are used to calculate a single index in a triangular + array. Since the range of mem is expected in the default case to be about + ten times larger than the range of rem, the array is skewed to reduce the + memory usage, with eight times the range for mem than for rem. See the + calculations for offset and bit in beenhere() for the details. + + For the deflate example of 286 symbols limited to 15-bit codes, the bit + vectors grow to total approximately 21 MB, in addition to the 4.3 MB done[] + array itself. + */ + +/* Globals to avoid propagating constants or constant pointers recursively */ +local int max; /* maximum allowed bit length for the codes */ +local int root; /* size of base code table in bits */ +local int large; /* largest code table so far */ +local size_t size; /* number of elements in num and done */ +local int *code; /* number of symbols assigned to each bit length */ +local big_t *num; /* saved results array for code counting */ +local struct tab *done; /* states already evaluated array */ + +/* Index function for num[] and done[] */ +#define INDEX(i,j,k) (((size_t)((i-1)>>1)*((i-2)>>1)+(j>>1)-1)*(max-1)+k-1) + +/* Free allocated space. Uses globals code, num, and done. */ +local void cleanup(void) +{ + size_t n; + + if (done != NULL) { + for (n = 0; n < size; n++) + if (done[n].len) + free(done[n].vec); + free(done); + } + if (num != NULL) + free(num); + if (code != NULL) + free(code); +} + +/* Return the number of possible Huffman codes using bit patterns of lengths + len through max inclusive, coding syms symbols, with left bit patterns of + length len unused -- return -1 if there is an overflow in the counting. + Keep a record of previous results in num to prevent repeating the same + calculation. Uses the globals max and num. */ +local big_t count(int syms, int len, int left) +{ + big_t sum; /* number of possible codes from this juncture */ + big_t got; /* value returned from count() */ + int least; /* least number of syms to use at this juncture */ + int most; /* most number of syms to use at this juncture */ + int use; /* number of bit patterns to use in next call */ + size_t index; /* index of this case in *num */ + + /* see if only one possible code */ + if (syms == left) + return 1; + + /* note and verify the expected state */ + assert(syms > left && left > 0 && len < max); + + /* see if we've done this one already */ + index = INDEX(syms, left, len); + got = num[index]; + if (got) + return got; /* we have -- return the saved result */ + + /* we need to use at least this many bit patterns so that the code won't be + incomplete at the next length (more bit patterns than symbols) */ + least = (left << 1) - syms; + if (least < 0) + least = 0; + + /* we can use at most this many bit patterns, lest there not be enough + available for the remaining symbols at the maximum length (if there were + no limit to the code length, this would become: most = left - 1) */ + most = (((code_t)left << (max - len)) - syms) / + (((code_t)1 << (max - len)) - 1); + + /* count all possible codes from this juncture and add them up */ + sum = 0; + for (use = least; use <= most; use++) { + got = count(syms - use, len + 1, (left - use) << 1); + sum += got; + if (got == (big_t)0 - 1 || sum < got) /* overflow */ + return (big_t)0 - 1; + } + + /* verify that all recursive calls are productive */ + assert(sum != 0); + + /* save the result and return it */ + num[index] = sum; + return sum; +} + +/* Return true if we've been here before, set to true if not. Set a bit in a + bit vector to indicate visiting this state. Each (syms,len,left) state + has a variable size bit vector indexed by (mem,rem). The bit vector is + lengthened if needed to allow setting the (mem,rem) bit. */ +local int beenhere(int syms, int len, int left, int mem, int rem) +{ + size_t index; /* index for this state's bit vector */ + size_t offset; /* offset in this state's bit vector */ + int bit; /* mask for this state's bit */ + size_t length; /* length of the bit vector in bytes */ + char *vector; /* new or enlarged bit vector */ + + /* point to vector for (syms,left,len), bit in vector for (mem,rem) */ + index = INDEX(syms, left, len); + mem -= 1 << root; + offset = (mem >> 3) + rem; + offset = ((offset * (offset + 1)) >> 1) + rem; + bit = 1 << (mem & 7); + + /* see if we've been here */ + length = done[index].len; + if (offset < length && (done[index].vec[offset] & bit) != 0) + return 1; /* done this! */ + + /* we haven't been here before -- set the bit to show we have now */ + + /* see if we need to lengthen the vector in order to set the bit */ + if (length <= offset) { + /* if we have one already, enlarge it, zero out the appended space */ + if (length) { + do { + length <<= 1; + } while (length <= offset); + vector = realloc(done[index].vec, length); + if (vector != NULL) + memset(vector + done[index].len, 0, length - done[index].len); + } + + /* otherwise we need to make a new vector and zero it out */ + else { + length = 1 << (len - root); + while (length <= offset) + length <<= 1; + vector = calloc(length, sizeof(char)); + } + + /* in either case, bail if we can't get the memory */ + if (vector == NULL) { + fputs("abort: unable to allocate enough memory\n", stderr); + cleanup(); + exit(1); + } + + /* install the new vector */ + done[index].len = length; + done[index].vec = vector; + } + + /* set the bit */ + done[index].vec[offset] |= bit; + return 0; +} + +/* Examine all possible codes from the given node (syms, len, left). Compute + the amount of memory required to build inflate's decoding tables, where the + number of code structures used so far is mem, and the number remaining in + the current sub-table is rem. Uses the globals max, code, root, large, and + done. */ +local void examine(int syms, int len, int left, int mem, int rem) +{ + int least; /* least number of syms to use at this juncture */ + int most; /* most number of syms to use at this juncture */ + int use; /* number of bit patterns to use in next call */ + + /* see if we have a complete code */ + if (syms == left) { + /* set the last code entry */ + code[len] = left; + + /* complete computation of memory used by this code */ + while (rem < left) { + left -= rem; + rem = 1 << (len - root); + mem += rem; + } + assert(rem == left); + + /* if this is a new maximum, show the entries used and the sub-code */ + if (mem > large) { + large = mem; + printf("max %d: ", mem); + for (use = root + 1; use <= max; use++) + if (code[use]) + printf("%d[%d] ", code[use], use); + putchar('\n'); + fflush(stdout); + } + + /* remove entries as we drop back down in the recursion */ + code[len] = 0; + return; + } + + /* prune the tree if we can */ + if (beenhere(syms, len, left, mem, rem)) + return; + + /* we need to use at least this many bit patterns so that the code won't be + incomplete at the next length (more bit patterns than symbols) */ + least = (left << 1) - syms; + if (least < 0) + least = 0; + + /* we can use at most this many bit patterns, lest there not be enough + available for the remaining symbols at the maximum length (if there were + no limit to the code length, this would become: most = left - 1) */ + most = (((code_t)left << (max - len)) - syms) / + (((code_t)1 << (max - len)) - 1); + + /* occupy least table spaces, creating new sub-tables as needed */ + use = least; + while (rem < use) { + use -= rem; + rem = 1 << (len - root); + mem += rem; + } + rem -= use; + + /* examine codes from here, updating table space as we go */ + for (use = least; use <= most; use++) { + code[len] = use; + examine(syms - use, len + 1, (left - use) << 1, + mem + (rem ? 1 << (len - root) : 0), rem << 1); + if (rem == 0) { + rem = 1 << (len - root); + mem += rem; + } + rem--; + } + + /* remove entries as we drop back down in the recursion */ + code[len] = 0; +} + +/* Look at all sub-codes starting with root + 1 bits. Look at only the valid + intermediate code states (syms, left, len). For each completed code, + calculate the amount of memory required by inflate to build the decoding + tables. Find the maximum amount of memory required and show the code that + requires that maximum. Uses the globals max, root, and num. */ +local void enough(int syms) +{ + int n; /* number of remaing symbols for this node */ + int left; /* number of unused bit patterns at this length */ + size_t index; /* index of this case in *num */ + + /* clear code */ + for (n = 0; n <= max; n++) + code[n] = 0; + + /* look at all (root + 1) bit and longer codes */ + large = 1 << root; /* base table */ + if (root < max) /* otherwise, there's only a base table */ + for (n = 3; n <= syms; n++) + for (left = 2; left < n; left += 2) + { + /* look at all reachable (root + 1) bit nodes, and the + resulting codes (complete at root + 2 or more) */ + index = INDEX(n, left, root + 1); + if (root + 1 < max && num[index]) /* reachable node */ + examine(n, root + 1, left, 1 << root, 0); + + /* also look at root bit codes with completions at root + 1 + bits (not saved in num, since complete), just in case */ + if (num[index - 1] && n <= left << 1) + examine((n - left) << 1, root + 1, (n - left) << 1, + 1 << root, 0); + } + + /* done */ + printf("done: maximum of %d table entries\n", large); +} + +/* + Examine and show the total number of possible Huffman codes for a given + maximum number of symbols, initial root table size, and maximum code length + in bits -- those are the command arguments in that order. The default + values are 286, 9, and 15 respectively, for the deflate literal/length code. + The possible codes are counted for each number of coded symbols from two to + the maximum. The counts for each of those and the total number of codes are + shown. The maximum number of inflate table entires is then calculated + across all possible codes. Each new maximum number of table entries and the + associated sub-code (starting at root + 1 == 10 bits) is shown. + + To count and examine Huffman codes that are not length-limited, provide a + maximum length equal to the number of symbols minus one. + + For the deflate literal/length code, use "enough". For the deflate distance + code, use "enough 30 6". + + This uses the %llu printf format to print big_t numbers, which assumes that + big_t is an unsigned long long. If the big_t type is changed (for example + to a multiple precision type), the method of printing will also need to be + updated. + */ +int main(int argc, char **argv) +{ + int syms; /* total number of symbols to code */ + int n; /* number of symbols to code for this run */ + big_t got; /* return value of count() */ + big_t sum; /* accumulated number of codes over n */ + code_t word; /* for counting bits in code_t */ + + /* set up globals for cleanup() */ + code = NULL; + num = NULL; + done = NULL; + + /* get arguments -- default to the deflate literal/length code */ + syms = 286; + root = 9; + max = 15; + if (argc > 1) { + syms = atoi(argv[1]); + if (argc > 2) { + root = atoi(argv[2]); + if (argc > 3) + max = atoi(argv[3]); + } + } + if (argc > 4 || syms < 2 || root < 1 || max < 1) { + fputs("invalid arguments, need: [sym >= 2 [root >= 1 [max >= 1]]]\n", + stderr); + return 1; + } + + /* if not restricting the code length, the longest is syms - 1 */ + if (max > syms - 1) + max = syms - 1; + + /* determine the number of bits in a code_t */ + for (n = 0, word = 1; word; n++, word <<= 1) + ; + + /* make sure that the calculation of most will not overflow */ + if (max > n || (code_t)(syms - 2) >= (((code_t)0 - 1) >> (max - 1))) { + fputs("abort: code length too long for internal types\n", stderr); + return 1; + } + + /* reject impossible code requests */ + if ((code_t)(syms - 1) > ((code_t)1 << max) - 1) { + fprintf(stderr, "%d symbols cannot be coded in %d bits\n", + syms, max); + return 1; + } + + /* allocate code vector */ + code = calloc(max + 1, sizeof(int)); + if (code == NULL) { + fputs("abort: unable to allocate enough memory\n", stderr); + return 1; + } + + /* determine size of saved results array, checking for overflows, + allocate and clear the array (set all to zero with calloc()) */ + if (syms == 2) /* iff max == 1 */ + num = NULL; /* won't be saving any results */ + else { + size = syms >> 1; + if (size > ((size_t)0 - 1) / (n = (syms - 1) >> 1) || + (size *= n, size > ((size_t)0 - 1) / (n = max - 1)) || + (size *= n, size > ((size_t)0 - 1) / sizeof(big_t)) || + (num = calloc(size, sizeof(big_t))) == NULL) { + fputs("abort: unable to allocate enough memory\n", stderr); + cleanup(); + return 1; + } + } + + /* count possible codes for all numbers of symbols, add up counts */ + sum = 0; + for (n = 2; n <= syms; n++) { + got = count(n, 1, 2); + sum += got; + if (got == (big_t)0 - 1 || sum < got) { /* overflow */ + fputs("abort: can't count that high!\n", stderr); + cleanup(); + return 1; + } + printf("%llu %d-codes\n", got, n); + } + printf("%llu total codes for 2 to %d symbols", sum, syms); + if (max < syms - 1) + printf(" (%d-bit length limit)\n", max); + else + puts(" (no length limit)"); + + /* allocate and clear done array for beenhere() */ + if (syms == 2) + done = NULL; + else if (size > ((size_t)0 - 1) / sizeof(struct tab) || + (done = calloc(size, sizeof(struct tab))) == NULL) { + fputs("abort: unable to allocate enough memory\n", stderr); + cleanup(); + return 1; + } + + /* find and show maximum inflate table usage */ + if (root > max) /* reduce root to max length */ + root = max; + if ((code_t)syms < ((code_t)1 << (root + 1))) + enough(syms); + else + puts("cannot handle minimum code lengths > root"); + + /* done */ + cleanup(); + return 0; +} diff --git a/software/scsi2sd-util/zlib-1.2.8/examples/fitblk.c b/software/scsi2sd-util/zlib-1.2.8/examples/fitblk.c new file mode 100644 index 0000000..c61de5c --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/examples/fitblk.c @@ -0,0 +1,233 @@ +/* fitblk.c: example of fitting compressed output to a specified size + Not copyrighted -- provided to the public domain + Version 1.1 25 November 2004 Mark Adler */ + +/* Version history: + 1.0 24 Nov 2004 First version + 1.1 25 Nov 2004 Change deflateInit2() to deflateInit() + Use fixed-size, stack-allocated raw buffers + Simplify code moving compression to subroutines + Use assert() for internal errors + Add detailed description of approach + */ + +/* Approach to just fitting a requested compressed size: + + fitblk performs three compression passes on a portion of the input + data in order to determine how much of that input will compress to + nearly the requested output block size. The first pass generates + enough deflate blocks to produce output to fill the requested + output size plus a specfied excess amount (see the EXCESS define + below). The last deflate block may go quite a bit past that, but + is discarded. The second pass decompresses and recompresses just + the compressed data that fit in the requested plus excess sized + buffer. The deflate process is terminated after that amount of + input, which is less than the amount consumed on the first pass. + The last deflate block of the result will be of a comparable size + to the final product, so that the header for that deflate block and + the compression ratio for that block will be about the same as in + the final product. The third compression pass decompresses the + result of the second step, but only the compressed data up to the + requested size minus an amount to allow the compressed stream to + complete (see the MARGIN define below). That will result in a + final compressed stream whose length is less than or equal to the + requested size. Assuming sufficient input and a requested size + greater than a few hundred bytes, the shortfall will typically be + less than ten bytes. + + If the input is short enough that the first compression completes + before filling the requested output size, then that compressed + stream is return with no recompression. + + EXCESS is chosen to be just greater than the shortfall seen in a + two pass approach similar to the above. That shortfall is due to + the last deflate block compressing more efficiently with a smaller + header on the second pass. EXCESS is set to be large enough so + that there is enough uncompressed data for the second pass to fill + out the requested size, and small enough so that the final deflate + block of the second pass will be close in size to the final deflate + block of the third and final pass. MARGIN is chosen to be just + large enough to assure that the final compression has enough room + to complete in all cases. + */ + +#include +#include +#include +#include "zlib.h" + +#define local static + +/* print nastygram and leave */ +local void quit(char *why) +{ + fprintf(stderr, "fitblk abort: %s\n", why); + exit(1); +} + +#define RAWLEN 4096 /* intermediate uncompressed buffer size */ + +/* compress from file to def until provided buffer is full or end of + input reached; return last deflate() return value, or Z_ERRNO if + there was read error on the file */ +local int partcompress(FILE *in, z_streamp def) +{ + int ret, flush; + unsigned char raw[RAWLEN]; + + flush = Z_NO_FLUSH; + do { + def->avail_in = fread(raw, 1, RAWLEN, in); + if (ferror(in)) + return Z_ERRNO; + def->next_in = raw; + if (feof(in)) + flush = Z_FINISH; + ret = deflate(def, flush); + assert(ret != Z_STREAM_ERROR); + } while (def->avail_out != 0 && flush == Z_NO_FLUSH); + return ret; +} + +/* recompress from inf's input to def's output; the input for inf and + the output for def are set in those structures before calling; + return last deflate() return value, or Z_MEM_ERROR if inflate() + was not able to allocate enough memory when it needed to */ +local int recompress(z_streamp inf, z_streamp def) +{ + int ret, flush; + unsigned char raw[RAWLEN]; + + flush = Z_NO_FLUSH; + do { + /* decompress */ + inf->avail_out = RAWLEN; + inf->next_out = raw; + ret = inflate(inf, Z_NO_FLUSH); + assert(ret != Z_STREAM_ERROR && ret != Z_DATA_ERROR && + ret != Z_NEED_DICT); + if (ret == Z_MEM_ERROR) + return ret; + + /* compress what was decompresed until done or no room */ + def->avail_in = RAWLEN - inf->avail_out; + def->next_in = raw; + if (inf->avail_out != 0) + flush = Z_FINISH; + ret = deflate(def, flush); + assert(ret != Z_STREAM_ERROR); + } while (ret != Z_STREAM_END && def->avail_out != 0); + return ret; +} + +#define EXCESS 256 /* empirically determined stream overage */ +#define MARGIN 8 /* amount to back off for completion */ + +/* compress from stdin to fixed-size block on stdout */ +int main(int argc, char **argv) +{ + int ret; /* return code */ + unsigned size; /* requested fixed output block size */ + unsigned have; /* bytes written by deflate() call */ + unsigned char *blk; /* intermediate and final stream */ + unsigned char *tmp; /* close to desired size stream */ + z_stream def, inf; /* zlib deflate and inflate states */ + + /* get requested output size */ + if (argc != 2) + quit("need one argument: size of output block"); + ret = strtol(argv[1], argv + 1, 10); + if (argv[1][0] != 0) + quit("argument must be a number"); + if (ret < 8) /* 8 is minimum zlib stream size */ + quit("need positive size of 8 or greater"); + size = (unsigned)ret; + + /* allocate memory for buffers and compression engine */ + blk = malloc(size + EXCESS); + def.zalloc = Z_NULL; + def.zfree = Z_NULL; + def.opaque = Z_NULL; + ret = deflateInit(&def, Z_DEFAULT_COMPRESSION); + if (ret != Z_OK || blk == NULL) + quit("out of memory"); + + /* compress from stdin until output full, or no more input */ + def.avail_out = size + EXCESS; + def.next_out = blk; + ret = partcompress(stdin, &def); + if (ret == Z_ERRNO) + quit("error reading input"); + + /* if it all fit, then size was undersubscribed -- done! */ + if (ret == Z_STREAM_END && def.avail_out >= EXCESS) { + /* write block to stdout */ + have = size + EXCESS - def.avail_out; + if (fwrite(blk, 1, have, stdout) != have || ferror(stdout)) + quit("error writing output"); + + /* clean up and print results to stderr */ + ret = deflateEnd(&def); + assert(ret != Z_STREAM_ERROR); + free(blk); + fprintf(stderr, + "%u bytes unused out of %u requested (all input)\n", + size - have, size); + return 0; + } + + /* it didn't all fit -- set up for recompression */ + inf.zalloc = Z_NULL; + inf.zfree = Z_NULL; + inf.opaque = Z_NULL; + inf.avail_in = 0; + inf.next_in = Z_NULL; + ret = inflateInit(&inf); + tmp = malloc(size + EXCESS); + if (ret != Z_OK || tmp == NULL) + quit("out of memory"); + ret = deflateReset(&def); + assert(ret != Z_STREAM_ERROR); + + /* do first recompression close to the right amount */ + inf.avail_in = size + EXCESS; + inf.next_in = blk; + def.avail_out = size + EXCESS; + def.next_out = tmp; + ret = recompress(&inf, &def); + if (ret == Z_MEM_ERROR) + quit("out of memory"); + + /* set up for next reocmpression */ + ret = inflateReset(&inf); + assert(ret != Z_STREAM_ERROR); + ret = deflateReset(&def); + assert(ret != Z_STREAM_ERROR); + + /* do second and final recompression (third compression) */ + inf.avail_in = size - MARGIN; /* assure stream will complete */ + inf.next_in = tmp; + def.avail_out = size; + def.next_out = blk; + ret = recompress(&inf, &def); + if (ret == Z_MEM_ERROR) + quit("out of memory"); + assert(ret == Z_STREAM_END); /* otherwise MARGIN too small */ + + /* done -- write block to stdout */ + have = size - def.avail_out; + if (fwrite(blk, 1, have, stdout) != have || ferror(stdout)) + quit("error writing output"); + + /* clean up and print results to stderr */ + free(tmp); + ret = inflateEnd(&inf); + assert(ret != Z_STREAM_ERROR); + ret = deflateEnd(&def); + assert(ret != Z_STREAM_ERROR); + free(blk); + fprintf(stderr, + "%u bytes unused out of %u requested (%lu input)\n", + size - have, size, def.total_in); + return 0; +} diff --git a/software/scsi2sd-util/zlib-1.2.8/examples/gun.c b/software/scsi2sd-util/zlib-1.2.8/examples/gun.c new file mode 100644 index 0000000..89e484f --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/examples/gun.c @@ -0,0 +1,702 @@ +/* gun.c -- simple gunzip to give an example of the use of inflateBack() + * Copyright (C) 2003, 2005, 2008, 2010, 2012 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + Version 1.7 12 August 2012 Mark Adler */ + +/* Version history: + 1.0 16 Feb 2003 First version for testing of inflateBack() + 1.1 21 Feb 2005 Decompress concatenated gzip streams + Remove use of "this" variable (C++ keyword) + Fix return value for in() + Improve allocation failure checking + Add typecasting for void * structures + Add -h option for command version and usage + Add a bunch of comments + 1.2 20 Mar 2005 Add Unix compress (LZW) decompression + Copy file attributes from input file to output file + 1.3 12 Jun 2005 Add casts for error messages [Oberhumer] + 1.4 8 Dec 2006 LZW decompression speed improvements + 1.5 9 Feb 2008 Avoid warning in latest version of gcc + 1.6 17 Jan 2010 Avoid signed/unsigned comparison warnings + 1.7 12 Aug 2012 Update for z_const usage in zlib 1.2.8 + */ + +/* + gun [ -t ] [ name ... ] + + decompresses the data in the named gzip files. If no arguments are given, + gun will decompress from stdin to stdout. The names must end in .gz, -gz, + .z, -z, _z, or .Z. The uncompressed data will be written to a file name + with the suffix stripped. On success, the original file is deleted. On + failure, the output file is deleted. For most failures, the command will + continue to process the remaining names on the command line. A memory + allocation failure will abort the command. If -t is specified, then the + listed files or stdin will be tested as gzip files for integrity (without + checking for a proper suffix), no output will be written, and no files + will be deleted. + + Like gzip, gun allows concatenated gzip streams and will decompress them, + writing all of the uncompressed data to the output. Unlike gzip, gun allows + an empty file on input, and will produce no error writing an empty output + file. + + gun will also decompress files made by Unix compress, which uses LZW + compression. These files are automatically detected by virtue of their + magic header bytes. Since the end of Unix compress stream is marked by the + end-of-file, they cannot be concantenated. If a Unix compress stream is + encountered in an input file, it is the last stream in that file. + + Like gunzip and uncompress, the file attributes of the orignal compressed + file are maintained in the final uncompressed file, to the extent that the + user permissions allow it. + + On my Mac OS X PowerPC G4, gun is almost twice as fast as gunzip (version + 1.2.4) is on the same file, when gun is linked with zlib 1.2.2. Also the + LZW decompression provided by gun is about twice as fast as the standard + Unix uncompress command. + */ + +/* external functions and related types and constants */ +#include /* fprintf() */ +#include /* malloc(), free() */ +#include /* strerror(), strcmp(), strlen(), memcpy() */ +#include /* errno */ +#include /* open() */ +#include /* read(), write(), close(), chown(), unlink() */ +#include +#include /* stat(), chmod() */ +#include /* utime() */ +#include "zlib.h" /* inflateBackInit(), inflateBack(), */ + /* inflateBackEnd(), crc32() */ + +/* function declaration */ +#define local static + +/* buffer constants */ +#define SIZE 32768U /* input and output buffer sizes */ +#define PIECE 16384 /* limits i/o chunks for 16-bit int case */ + +/* structure for infback() to pass to input function in() -- it maintains the + input file and a buffer of size SIZE */ +struct ind { + int infile; + unsigned char *inbuf; +}; + +/* Load input buffer, assumed to be empty, and return bytes loaded and a + pointer to them. read() is called until the buffer is full, or until it + returns end-of-file or error. Return 0 on error. */ +local unsigned in(void *in_desc, z_const unsigned char **buf) +{ + int ret; + unsigned len; + unsigned char *next; + struct ind *me = (struct ind *)in_desc; + + next = me->inbuf; + *buf = next; + len = 0; + do { + ret = PIECE; + if ((unsigned)ret > SIZE - len) + ret = (int)(SIZE - len); + ret = (int)read(me->infile, next, ret); + if (ret == -1) { + len = 0; + break; + } + next += ret; + len += ret; + } while (ret != 0 && len < SIZE); + return len; +} + +/* structure for infback() to pass to output function out() -- it maintains the + output file, a running CRC-32 check on the output and the total number of + bytes output, both for checking against the gzip trailer. (The length in + the gzip trailer is stored modulo 2^32, so it's ok if a long is 32 bits and + the output is greater than 4 GB.) */ +struct outd { + int outfile; + int check; /* true if checking crc and total */ + unsigned long crc; + unsigned long total; +}; + +/* Write output buffer and update the CRC-32 and total bytes written. write() + is called until all of the output is written or an error is encountered. + On success out() returns 0. For a write failure, out() returns 1. If the + output file descriptor is -1, then nothing is written. + */ +local int out(void *out_desc, unsigned char *buf, unsigned len) +{ + int ret; + struct outd *me = (struct outd *)out_desc; + + if (me->check) { + me->crc = crc32(me->crc, buf, len); + me->total += len; + } + if (me->outfile != -1) + do { + ret = PIECE; + if ((unsigned)ret > len) + ret = (int)len; + ret = (int)write(me->outfile, buf, ret); + if (ret == -1) + return 1; + buf += ret; + len -= ret; + } while (len != 0); + return 0; +} + +/* next input byte macro for use inside lunpipe() and gunpipe() */ +#define NEXT() (have ? 0 : (have = in(indp, &next)), \ + last = have ? (have--, (int)(*next++)) : -1) + +/* memory for gunpipe() and lunpipe() -- + the first 256 entries of prefix[] and suffix[] are never used, could + have offset the index, but it's faster to waste the memory */ +unsigned char inbuf[SIZE]; /* input buffer */ +unsigned char outbuf[SIZE]; /* output buffer */ +unsigned short prefix[65536]; /* index to LZW prefix string */ +unsigned char suffix[65536]; /* one-character LZW suffix */ +unsigned char match[65280 + 2]; /* buffer for reversed match or gzip + 32K sliding window */ + +/* throw out what's left in the current bits byte buffer (this is a vestigial + aspect of the compressed data format derived from an implementation that + made use of a special VAX machine instruction!) */ +#define FLUSHCODE() \ + do { \ + left = 0; \ + rem = 0; \ + if (chunk > have) { \ + chunk -= have; \ + have = 0; \ + if (NEXT() == -1) \ + break; \ + chunk--; \ + if (chunk > have) { \ + chunk = have = 0; \ + break; \ + } \ + } \ + have -= chunk; \ + next += chunk; \ + chunk = 0; \ + } while (0) + +/* Decompress a compress (LZW) file from indp to outfile. The compress magic + header (two bytes) has already been read and verified. There are have bytes + of buffered input at next. strm is used for passing error information back + to gunpipe(). + + lunpipe() will return Z_OK on success, Z_BUF_ERROR for an unexpected end of + file, read error, or write error (a write error indicated by strm->next_in + not equal to Z_NULL), or Z_DATA_ERROR for invalid input. + */ +local int lunpipe(unsigned have, z_const unsigned char *next, struct ind *indp, + int outfile, z_stream *strm) +{ + int last; /* last byte read by NEXT(), or -1 if EOF */ + unsigned chunk; /* bytes left in current chunk */ + int left; /* bits left in rem */ + unsigned rem; /* unused bits from input */ + int bits; /* current bits per code */ + unsigned code; /* code, table traversal index */ + unsigned mask; /* mask for current bits codes */ + int max; /* maximum bits per code for this stream */ + unsigned flags; /* compress flags, then block compress flag */ + unsigned end; /* last valid entry in prefix/suffix tables */ + unsigned temp; /* current code */ + unsigned prev; /* previous code */ + unsigned final; /* last character written for previous code */ + unsigned stack; /* next position for reversed string */ + unsigned outcnt; /* bytes in output buffer */ + struct outd outd; /* output structure */ + unsigned char *p; + + /* set up output */ + outd.outfile = outfile; + outd.check = 0; + + /* process remainder of compress header -- a flags byte */ + flags = NEXT(); + if (last == -1) + return Z_BUF_ERROR; + if (flags & 0x60) { + strm->msg = (char *)"unknown lzw flags set"; + return Z_DATA_ERROR; + } + max = flags & 0x1f; + if (max < 9 || max > 16) { + strm->msg = (char *)"lzw bits out of range"; + return Z_DATA_ERROR; + } + if (max == 9) /* 9 doesn't really mean 9 */ + max = 10; + flags &= 0x80; /* true if block compress */ + + /* clear table */ + bits = 9; + mask = 0x1ff; + end = flags ? 256 : 255; + + /* set up: get first 9-bit code, which is the first decompressed byte, but + don't create a table entry until the next code */ + if (NEXT() == -1) /* no compressed data is ok */ + return Z_OK; + final = prev = (unsigned)last; /* low 8 bits of code */ + if (NEXT() == -1) /* missing a bit */ + return Z_BUF_ERROR; + if (last & 1) { /* code must be < 256 */ + strm->msg = (char *)"invalid lzw code"; + return Z_DATA_ERROR; + } + rem = (unsigned)last >> 1; /* remaining 7 bits */ + left = 7; + chunk = bits - 2; /* 7 bytes left in this chunk */ + outbuf[0] = (unsigned char)final; /* write first decompressed byte */ + outcnt = 1; + + /* decode codes */ + stack = 0; + for (;;) { + /* if the table will be full after this, increment the code size */ + if (end >= mask && bits < max) { + FLUSHCODE(); + bits++; + mask <<= 1; + mask++; + } + + /* get a code of length bits */ + if (chunk == 0) /* decrement chunk modulo bits */ + chunk = bits; + code = rem; /* low bits of code */ + if (NEXT() == -1) { /* EOF is end of compressed data */ + /* write remaining buffered output */ + if (outcnt && out(&outd, outbuf, outcnt)) { + strm->next_in = outbuf; /* signal write error */ + return Z_BUF_ERROR; + } + return Z_OK; + } + code += (unsigned)last << left; /* middle (or high) bits of code */ + left += 8; + chunk--; + if (bits > left) { /* need more bits */ + if (NEXT() == -1) /* can't end in middle of code */ + return Z_BUF_ERROR; + code += (unsigned)last << left; /* high bits of code */ + left += 8; + chunk--; + } + code &= mask; /* mask to current code length */ + left -= bits; /* number of unused bits */ + rem = (unsigned)last >> (8 - left); /* unused bits from last byte */ + + /* process clear code (256) */ + if (code == 256 && flags) { + FLUSHCODE(); + bits = 9; /* initialize bits and mask */ + mask = 0x1ff; + end = 255; /* empty table */ + continue; /* get next code */ + } + + /* special code to reuse last match */ + temp = code; /* save the current code */ + if (code > end) { + /* Be picky on the allowed code here, and make sure that the code + we drop through (prev) will be a valid index so that random + input does not cause an exception. The code != end + 1 check is + empirically derived, and not checked in the original uncompress + code. If this ever causes a problem, that check could be safely + removed. Leaving this check in greatly improves gun's ability + to detect random or corrupted input after a compress header. + In any case, the prev > end check must be retained. */ + if (code != end + 1 || prev > end) { + strm->msg = (char *)"invalid lzw code"; + return Z_DATA_ERROR; + } + match[stack++] = (unsigned char)final; + code = prev; + } + + /* walk through linked list to generate output in reverse order */ + p = match + stack; + while (code >= 256) { + *p++ = suffix[code]; + code = prefix[code]; + } + stack = p - match; + match[stack++] = (unsigned char)code; + final = code; + + /* link new table entry */ + if (end < mask) { + end++; + prefix[end] = (unsigned short)prev; + suffix[end] = (unsigned char)final; + } + + /* set previous code for next iteration */ + prev = temp; + + /* write output in forward order */ + while (stack > SIZE - outcnt) { + while (outcnt < SIZE) + outbuf[outcnt++] = match[--stack]; + if (out(&outd, outbuf, outcnt)) { + strm->next_in = outbuf; /* signal write error */ + return Z_BUF_ERROR; + } + outcnt = 0; + } + p = match + stack; + do { + outbuf[outcnt++] = *--p; + } while (p > match); + stack = 0; + + /* loop for next code with final and prev as the last match, rem and + left provide the first 0..7 bits of the next code, end is the last + valid table entry */ + } +} + +/* Decompress a gzip file from infile to outfile. strm is assumed to have been + successfully initialized with inflateBackInit(). The input file may consist + of a series of gzip streams, in which case all of them will be decompressed + to the output file. If outfile is -1, then the gzip stream(s) integrity is + checked and nothing is written. + + The return value is a zlib error code: Z_MEM_ERROR if out of memory, + Z_DATA_ERROR if the header or the compressed data is invalid, or if the + trailer CRC-32 check or length doesn't match, Z_BUF_ERROR if the input ends + prematurely or a write error occurs, or Z_ERRNO if junk (not a another gzip + stream) follows a valid gzip stream. + */ +local int gunpipe(z_stream *strm, int infile, int outfile) +{ + int ret, first, last; + unsigned have, flags, len; + z_const unsigned char *next = NULL; + struct ind ind, *indp; + struct outd outd; + + /* setup input buffer */ + ind.infile = infile; + ind.inbuf = inbuf; + indp = &ind; + + /* decompress concatenated gzip streams */ + have = 0; /* no input data read in yet */ + first = 1; /* looking for first gzip header */ + strm->next_in = Z_NULL; /* so Z_BUF_ERROR means EOF */ + for (;;) { + /* look for the two magic header bytes for a gzip stream */ + if (NEXT() == -1) { + ret = Z_OK; + break; /* empty gzip stream is ok */ + } + if (last != 31 || (NEXT() != 139 && last != 157)) { + strm->msg = (char *)"incorrect header check"; + ret = first ? Z_DATA_ERROR : Z_ERRNO; + break; /* not a gzip or compress header */ + } + first = 0; /* next non-header is junk */ + + /* process a compress (LZW) file -- can't be concatenated after this */ + if (last == 157) { + ret = lunpipe(have, next, indp, outfile, strm); + break; + } + + /* process remainder of gzip header */ + ret = Z_BUF_ERROR; + if (NEXT() != 8) { /* only deflate method allowed */ + if (last == -1) break; + strm->msg = (char *)"unknown compression method"; + ret = Z_DATA_ERROR; + break; + } + flags = NEXT(); /* header flags */ + NEXT(); /* discard mod time, xflgs, os */ + NEXT(); + NEXT(); + NEXT(); + NEXT(); + NEXT(); + if (last == -1) break; + if (flags & 0xe0) { + strm->msg = (char *)"unknown header flags set"; + ret = Z_DATA_ERROR; + break; + } + if (flags & 4) { /* extra field */ + len = NEXT(); + len += (unsigned)(NEXT()) << 8; + if (last == -1) break; + while (len > have) { + len -= have; + have = 0; + if (NEXT() == -1) break; + len--; + } + if (last == -1) break; + have -= len; + next += len; + } + if (flags & 8) /* file name */ + while (NEXT() != 0 && last != -1) + ; + if (flags & 16) /* comment */ + while (NEXT() != 0 && last != -1) + ; + if (flags & 2) { /* header crc */ + NEXT(); + NEXT(); + } + if (last == -1) break; + + /* set up output */ + outd.outfile = outfile; + outd.check = 1; + outd.crc = crc32(0L, Z_NULL, 0); + outd.total = 0; + + /* decompress data to output */ + strm->next_in = next; + strm->avail_in = have; + ret = inflateBack(strm, in, indp, out, &outd); + if (ret != Z_STREAM_END) break; + next = strm->next_in; + have = strm->avail_in; + strm->next_in = Z_NULL; /* so Z_BUF_ERROR means EOF */ + + /* check trailer */ + ret = Z_BUF_ERROR; + if (NEXT() != (int)(outd.crc & 0xff) || + NEXT() != (int)((outd.crc >> 8) & 0xff) || + NEXT() != (int)((outd.crc >> 16) & 0xff) || + NEXT() != (int)((outd.crc >> 24) & 0xff)) { + /* crc error */ + if (last != -1) { + strm->msg = (char *)"incorrect data check"; + ret = Z_DATA_ERROR; + } + break; + } + if (NEXT() != (int)(outd.total & 0xff) || + NEXT() != (int)((outd.total >> 8) & 0xff) || + NEXT() != (int)((outd.total >> 16) & 0xff) || + NEXT() != (int)((outd.total >> 24) & 0xff)) { + /* length error */ + if (last != -1) { + strm->msg = (char *)"incorrect length check"; + ret = Z_DATA_ERROR; + } + break; + } + + /* go back and look for another gzip stream */ + } + + /* clean up and return */ + return ret; +} + +/* Copy file attributes, from -> to, as best we can. This is best effort, so + no errors are reported. The mode bits, including suid, sgid, and the sticky + bit are copied (if allowed), the owner's user id and group id are copied + (again if allowed), and the access and modify times are copied. */ +local void copymeta(char *from, char *to) +{ + struct stat was; + struct utimbuf when; + + /* get all of from's Unix meta data, return if not a regular file */ + if (stat(from, &was) != 0 || (was.st_mode & S_IFMT) != S_IFREG) + return; + + /* set to's mode bits, ignore errors */ + (void)chmod(to, was.st_mode & 07777); + + /* copy owner's user and group, ignore errors */ + (void)chown(to, was.st_uid, was.st_gid); + + /* copy access and modify times, ignore errors */ + when.actime = was.st_atime; + when.modtime = was.st_mtime; + (void)utime(to, &when); +} + +/* Decompress the file inname to the file outnname, of if test is true, just + decompress without writing and check the gzip trailer for integrity. If + inname is NULL or an empty string, read from stdin. If outname is NULL or + an empty string, write to stdout. strm is a pre-initialized inflateBack + structure. When appropriate, copy the file attributes from inname to + outname. + + gunzip() returns 1 if there is an out-of-memory error or an unexpected + return code from gunpipe(). Otherwise it returns 0. + */ +local int gunzip(z_stream *strm, char *inname, char *outname, int test) +{ + int ret; + int infile, outfile; + + /* open files */ + if (inname == NULL || *inname == 0) { + inname = "-"; + infile = 0; /* stdin */ + } + else { + infile = open(inname, O_RDONLY, 0); + if (infile == -1) { + fprintf(stderr, "gun cannot open %s\n", inname); + return 0; + } + } + if (test) + outfile = -1; + else if (outname == NULL || *outname == 0) { + outname = "-"; + outfile = 1; /* stdout */ + } + else { + outfile = open(outname, O_CREAT | O_TRUNC | O_WRONLY, 0666); + if (outfile == -1) { + close(infile); + fprintf(stderr, "gun cannot create %s\n", outname); + return 0; + } + } + errno = 0; + + /* decompress */ + ret = gunpipe(strm, infile, outfile); + if (outfile > 2) close(outfile); + if (infile > 2) close(infile); + + /* interpret result */ + switch (ret) { + case Z_OK: + case Z_ERRNO: + if (infile > 2 && outfile > 2) { + copymeta(inname, outname); /* copy attributes */ + unlink(inname); + } + if (ret == Z_ERRNO) + fprintf(stderr, "gun warning: trailing garbage ignored in %s\n", + inname); + break; + case Z_DATA_ERROR: + if (outfile > 2) unlink(outname); + fprintf(stderr, "gun data error on %s: %s\n", inname, strm->msg); + break; + case Z_MEM_ERROR: + if (outfile > 2) unlink(outname); + fprintf(stderr, "gun out of memory error--aborting\n"); + return 1; + case Z_BUF_ERROR: + if (outfile > 2) unlink(outname); + if (strm->next_in != Z_NULL) { + fprintf(stderr, "gun write error on %s: %s\n", + outname, strerror(errno)); + } + else if (errno) { + fprintf(stderr, "gun read error on %s: %s\n", + inname, strerror(errno)); + } + else { + fprintf(stderr, "gun unexpected end of file on %s\n", + inname); + } + break; + default: + if (outfile > 2) unlink(outname); + fprintf(stderr, "gun internal error--aborting\n"); + return 1; + } + return 0; +} + +/* Process the gun command line arguments. See the command syntax near the + beginning of this source file. */ +int main(int argc, char **argv) +{ + int ret, len, test; + char *outname; + unsigned char *window; + z_stream strm; + + /* initialize inflateBack state for repeated use */ + window = match; /* reuse LZW match buffer */ + strm.zalloc = Z_NULL; + strm.zfree = Z_NULL; + strm.opaque = Z_NULL; + ret = inflateBackInit(&strm, 15, window); + if (ret != Z_OK) { + fprintf(stderr, "gun out of memory error--aborting\n"); + return 1; + } + + /* decompress each file to the same name with the suffix removed */ + argc--; + argv++; + test = 0; + if (argc && strcmp(*argv, "-h") == 0) { + fprintf(stderr, "gun 1.6 (17 Jan 2010)\n"); + fprintf(stderr, "Copyright (C) 2003-2010 Mark Adler\n"); + fprintf(stderr, "usage: gun [-t] [file1.gz [file2.Z ...]]\n"); + return 0; + } + if (argc && strcmp(*argv, "-t") == 0) { + test = 1; + argc--; + argv++; + } + if (argc) + do { + if (test) + outname = NULL; + else { + len = (int)strlen(*argv); + if (strcmp(*argv + len - 3, ".gz") == 0 || + strcmp(*argv + len - 3, "-gz") == 0) + len -= 3; + else if (strcmp(*argv + len - 2, ".z") == 0 || + strcmp(*argv + len - 2, "-z") == 0 || + strcmp(*argv + len - 2, "_z") == 0 || + strcmp(*argv + len - 2, ".Z") == 0) + len -= 2; + else { + fprintf(stderr, "gun error: no gz type on %s--skipping\n", + *argv); + continue; + } + outname = malloc(len + 1); + if (outname == NULL) { + fprintf(stderr, "gun out of memory error--aborting\n"); + ret = 1; + break; + } + memcpy(outname, *argv, len); + outname[len] = 0; + } + ret = gunzip(&strm, *argv, outname, test); + if (outname != NULL) free(outname); + if (ret) break; + } while (argv++, --argc); + else + ret = gunzip(&strm, NULL, NULL, test); + + /* clean up */ + inflateBackEnd(&strm); + return ret; +} diff --git a/software/scsi2sd-util/zlib-1.2.8/examples/gzappend.c b/software/scsi2sd-util/zlib-1.2.8/examples/gzappend.c new file mode 100644 index 0000000..662dec3 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/examples/gzappend.c @@ -0,0 +1,504 @@ +/* gzappend -- command to append to a gzip file + + Copyright (C) 2003, 2012 Mark Adler, all rights reserved + version 1.2, 11 Oct 2012 + + This software is provided 'as-is', without any express or implied + warranty. In no event will the author be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. + + Mark Adler madler@alumni.caltech.edu + */ + +/* + * Change history: + * + * 1.0 19 Oct 2003 - First version + * 1.1 4 Nov 2003 - Expand and clarify some comments and notes + * - Add version and copyright to help + * - Send help to stdout instead of stderr + * - Add some preemptive typecasts + * - Add L to constants in lseek() calls + * - Remove some debugging information in error messages + * - Use new data_type definition for zlib 1.2.1 + * - Simplfy and unify file operations + * - Finish off gzip file in gztack() + * - Use deflatePrime() instead of adding empty blocks + * - Keep gzip file clean on appended file read errors + * - Use in-place rotate instead of auxiliary buffer + * (Why you ask? Because it was fun to write!) + * 1.2 11 Oct 2012 - Fix for proper z_const usage + * - Check for input buffer malloc failure + */ + +/* + gzappend takes a gzip file and appends to it, compressing files from the + command line or data from stdin. The gzip file is written to directly, to + avoid copying that file, in case it's large. Note that this results in the + unfriendly behavior that if gzappend fails, the gzip file is corrupted. + + This program was written to illustrate the use of the new Z_BLOCK option of + zlib 1.2.x's inflate() function. This option returns from inflate() at each + block boundary to facilitate locating and modifying the last block bit at + the start of the final deflate block. Also whether using Z_BLOCK or not, + another required feature of zlib 1.2.x is that inflate() now provides the + number of unusued bits in the last input byte used. gzappend will not work + with versions of zlib earlier than 1.2.1. + + gzappend first decompresses the gzip file internally, discarding all but + the last 32K of uncompressed data, and noting the location of the last block + bit and the number of unused bits in the last byte of the compressed data. + The gzip trailer containing the CRC-32 and length of the uncompressed data + is verified. This trailer will be later overwritten. + + Then the last block bit is cleared by seeking back in the file and rewriting + the byte that contains it. Seeking forward, the last byte of the compressed + data is saved along with the number of unused bits to initialize deflate. + + A deflate process is initialized, using the last 32K of the uncompressed + data from the gzip file to initialize the dictionary. If the total + uncompressed data was less than 32K, then all of it is used to initialize + the dictionary. The deflate output bit buffer is also initialized with the + last bits from the original deflate stream. From here on, the data to + append is simply compressed using deflate, and written to the gzip file. + When that is complete, the new CRC-32 and uncompressed length are written + as the trailer of the gzip file. + */ + +#include +#include +#include +#include +#include +#include "zlib.h" + +#define local static +#define LGCHUNK 14 +#define CHUNK (1U << LGCHUNK) +#define DSIZE 32768U + +/* print an error message and terminate with extreme prejudice */ +local void bye(char *msg1, char *msg2) +{ + fprintf(stderr, "gzappend error: %s%s\n", msg1, msg2); + exit(1); +} + +/* return the greatest common divisor of a and b using Euclid's algorithm, + modified to be fast when one argument much greater than the other, and + coded to avoid unnecessary swapping */ +local unsigned gcd(unsigned a, unsigned b) +{ + unsigned c; + + while (a && b) + if (a > b) { + c = b; + while (a - c >= c) + c <<= 1; + a -= c; + } + else { + c = a; + while (b - c >= c) + c <<= 1; + b -= c; + } + return a + b; +} + +/* rotate list[0..len-1] left by rot positions, in place */ +local void rotate(unsigned char *list, unsigned len, unsigned rot) +{ + unsigned char tmp; + unsigned cycles; + unsigned char *start, *last, *to, *from; + + /* normalize rot and handle degenerate cases */ + if (len < 2) return; + if (rot >= len) rot %= len; + if (rot == 0) return; + + /* pointer to last entry in list */ + last = list + (len - 1); + + /* do simple left shift by one */ + if (rot == 1) { + tmp = *list; + memcpy(list, list + 1, len - 1); + *last = tmp; + return; + } + + /* do simple right shift by one */ + if (rot == len - 1) { + tmp = *last; + memmove(list + 1, list, len - 1); + *list = tmp; + return; + } + + /* otherwise do rotate as a set of cycles in place */ + cycles = gcd(len, rot); /* number of cycles */ + do { + start = from = list + cycles; /* start index is arbitrary */ + tmp = *from; /* save entry to be overwritten */ + for (;;) { + to = from; /* next step in cycle */ + from += rot; /* go right rot positions */ + if (from > last) from -= len; /* (pointer better not wrap) */ + if (from == start) break; /* all but one shifted */ + *to = *from; /* shift left */ + } + *to = tmp; /* complete the circle */ + } while (--cycles); +} + +/* structure for gzip file read operations */ +typedef struct { + int fd; /* file descriptor */ + int size; /* 1 << size is bytes in buf */ + unsigned left; /* bytes available at next */ + unsigned char *buf; /* buffer */ + z_const unsigned char *next; /* next byte in buffer */ + char *name; /* file name for error messages */ +} file; + +/* reload buffer */ +local int readin(file *in) +{ + int len; + + len = read(in->fd, in->buf, 1 << in->size); + if (len == -1) bye("error reading ", in->name); + in->left = (unsigned)len; + in->next = in->buf; + return len; +} + +/* read from file in, exit if end-of-file */ +local int readmore(file *in) +{ + if (readin(in) == 0) bye("unexpected end of ", in->name); + return 0; +} + +#define read1(in) (in->left == 0 ? readmore(in) : 0, \ + in->left--, *(in->next)++) + +/* skip over n bytes of in */ +local void skip(file *in, unsigned n) +{ + unsigned bypass; + + if (n > in->left) { + n -= in->left; + bypass = n & ~((1U << in->size) - 1); + if (bypass) { + if (lseek(in->fd, (off_t)bypass, SEEK_CUR) == -1) + bye("seeking ", in->name); + n -= bypass; + } + readmore(in); + if (n > in->left) + bye("unexpected end of ", in->name); + } + in->left -= n; + in->next += n; +} + +/* read a four-byte unsigned integer, little-endian, from in */ +unsigned long read4(file *in) +{ + unsigned long val; + + val = read1(in); + val += (unsigned)read1(in) << 8; + val += (unsigned long)read1(in) << 16; + val += (unsigned long)read1(in) << 24; + return val; +} + +/* skip over gzip header */ +local void gzheader(file *in) +{ + int flags; + unsigned n; + + if (read1(in) != 31 || read1(in) != 139) bye(in->name, " not a gzip file"); + if (read1(in) != 8) bye("unknown compression method in", in->name); + flags = read1(in); + if (flags & 0xe0) bye("unknown header flags set in", in->name); + skip(in, 6); + if (flags & 4) { + n = read1(in); + n += (unsigned)(read1(in)) << 8; + skip(in, n); + } + if (flags & 8) while (read1(in) != 0) ; + if (flags & 16) while (read1(in) != 0) ; + if (flags & 2) skip(in, 2); +} + +/* decompress gzip file "name", return strm with a deflate stream ready to + continue compression of the data in the gzip file, and return a file + descriptor pointing to where to write the compressed data -- the deflate + stream is initialized to compress using level "level" */ +local int gzscan(char *name, z_stream *strm, int level) +{ + int ret, lastbit, left, full; + unsigned have; + unsigned long crc, tot; + unsigned char *window; + off_t lastoff, end; + file gz; + + /* open gzip file */ + gz.name = name; + gz.fd = open(name, O_RDWR, 0); + if (gz.fd == -1) bye("cannot open ", name); + gz.buf = malloc(CHUNK); + if (gz.buf == NULL) bye("out of memory", ""); + gz.size = LGCHUNK; + gz.left = 0; + + /* skip gzip header */ + gzheader(&gz); + + /* prepare to decompress */ + window = malloc(DSIZE); + if (window == NULL) bye("out of memory", ""); + strm->zalloc = Z_NULL; + strm->zfree = Z_NULL; + strm->opaque = Z_NULL; + ret = inflateInit2(strm, -15); + if (ret != Z_OK) bye("out of memory", " or library mismatch"); + + /* decompress the deflate stream, saving append information */ + lastbit = 0; + lastoff = lseek(gz.fd, 0L, SEEK_CUR) - gz.left; + left = 0; + strm->avail_in = gz.left; + strm->next_in = gz.next; + crc = crc32(0L, Z_NULL, 0); + have = full = 0; + do { + /* if needed, get more input */ + if (strm->avail_in == 0) { + readmore(&gz); + strm->avail_in = gz.left; + strm->next_in = gz.next; + } + + /* set up output to next available section of sliding window */ + strm->avail_out = DSIZE - have; + strm->next_out = window + have; + + /* inflate and check for errors */ + ret = inflate(strm, Z_BLOCK); + if (ret == Z_STREAM_ERROR) bye("internal stream error!", ""); + if (ret == Z_MEM_ERROR) bye("out of memory", ""); + if (ret == Z_DATA_ERROR) + bye("invalid compressed data--format violated in", name); + + /* update crc and sliding window pointer */ + crc = crc32(crc, window + have, DSIZE - have - strm->avail_out); + if (strm->avail_out) + have = DSIZE - strm->avail_out; + else { + have = 0; + full = 1; + } + + /* process end of block */ + if (strm->data_type & 128) { + if (strm->data_type & 64) + left = strm->data_type & 0x1f; + else { + lastbit = strm->data_type & 0x1f; + lastoff = lseek(gz.fd, 0L, SEEK_CUR) - strm->avail_in; + } + } + } while (ret != Z_STREAM_END); + inflateEnd(strm); + gz.left = strm->avail_in; + gz.next = strm->next_in; + + /* save the location of the end of the compressed data */ + end = lseek(gz.fd, 0L, SEEK_CUR) - gz.left; + + /* check gzip trailer and save total for deflate */ + if (crc != read4(&gz)) + bye("invalid compressed data--crc mismatch in ", name); + tot = strm->total_out; + if ((tot & 0xffffffffUL) != read4(&gz)) + bye("invalid compressed data--length mismatch in", name); + + /* if not at end of file, warn */ + if (gz.left || readin(&gz)) + fprintf(stderr, + "gzappend warning: junk at end of gzip file overwritten\n"); + + /* clear last block bit */ + lseek(gz.fd, lastoff - (lastbit != 0), SEEK_SET); + if (read(gz.fd, gz.buf, 1) != 1) bye("reading after seek on ", name); + *gz.buf = (unsigned char)(*gz.buf ^ (1 << ((8 - lastbit) & 7))); + lseek(gz.fd, -1L, SEEK_CUR); + if (write(gz.fd, gz.buf, 1) != 1) bye("writing after seek to ", name); + + /* if window wrapped, build dictionary from window by rotating */ + if (full) { + rotate(window, DSIZE, have); + have = DSIZE; + } + + /* set up deflate stream with window, crc, total_in, and leftover bits */ + ret = deflateInit2(strm, level, Z_DEFLATED, -15, 8, Z_DEFAULT_STRATEGY); + if (ret != Z_OK) bye("out of memory", ""); + deflateSetDictionary(strm, window, have); + strm->adler = crc; + strm->total_in = tot; + if (left) { + lseek(gz.fd, --end, SEEK_SET); + if (read(gz.fd, gz.buf, 1) != 1) bye("reading after seek on ", name); + deflatePrime(strm, 8 - left, *gz.buf); + } + lseek(gz.fd, end, SEEK_SET); + + /* clean up and return */ + free(window); + free(gz.buf); + return gz.fd; +} + +/* append file "name" to gzip file gd using deflate stream strm -- if last + is true, then finish off the deflate stream at the end */ +local void gztack(char *name, int gd, z_stream *strm, int last) +{ + int fd, len, ret; + unsigned left; + unsigned char *in, *out; + + /* open file to compress and append */ + fd = 0; + if (name != NULL) { + fd = open(name, O_RDONLY, 0); + if (fd == -1) + fprintf(stderr, "gzappend warning: %s not found, skipping ...\n", + name); + } + + /* allocate buffers */ + in = malloc(CHUNK); + out = malloc(CHUNK); + if (in == NULL || out == NULL) bye("out of memory", ""); + + /* compress input file and append to gzip file */ + do { + /* get more input */ + len = read(fd, in, CHUNK); + if (len == -1) { + fprintf(stderr, + "gzappend warning: error reading %s, skipping rest ...\n", + name); + len = 0; + } + strm->avail_in = (unsigned)len; + strm->next_in = in; + if (len) strm->adler = crc32(strm->adler, in, (unsigned)len); + + /* compress and write all available output */ + do { + strm->avail_out = CHUNK; + strm->next_out = out; + ret = deflate(strm, last && len == 0 ? Z_FINISH : Z_NO_FLUSH); + left = CHUNK - strm->avail_out; + while (left) { + len = write(gd, out + CHUNK - strm->avail_out - left, left); + if (len == -1) bye("writing gzip file", ""); + left -= (unsigned)len; + } + } while (strm->avail_out == 0 && ret != Z_STREAM_END); + } while (len != 0); + + /* write trailer after last entry */ + if (last) { + deflateEnd(strm); + out[0] = (unsigned char)(strm->adler); + out[1] = (unsigned char)(strm->adler >> 8); + out[2] = (unsigned char)(strm->adler >> 16); + out[3] = (unsigned char)(strm->adler >> 24); + out[4] = (unsigned char)(strm->total_in); + out[5] = (unsigned char)(strm->total_in >> 8); + out[6] = (unsigned char)(strm->total_in >> 16); + out[7] = (unsigned char)(strm->total_in >> 24); + len = 8; + do { + ret = write(gd, out + 8 - len, len); + if (ret == -1) bye("writing gzip file", ""); + len -= ret; + } while (len); + close(gd); + } + + /* clean up and return */ + free(out); + free(in); + if (fd > 0) close(fd); +} + +/* process the compression level option if present, scan the gzip file, and + append the specified files, or append the data from stdin if no other file + names are provided on the command line -- the gzip file must be writable + and seekable */ +int main(int argc, char **argv) +{ + int gd, level; + z_stream strm; + + /* ignore command name */ + argc--; argv++; + + /* provide usage if no arguments */ + if (*argv == NULL) { + printf( + "gzappend 1.2 (11 Oct 2012) Copyright (C) 2003, 2012 Mark Adler\n" + ); + printf( + "usage: gzappend [-level] file.gz [ addthis [ andthis ... ]]\n"); + return 0; + } + + /* set compression level */ + level = Z_DEFAULT_COMPRESSION; + if (argv[0][0] == '-') { + if (argv[0][1] < '0' || argv[0][1] > '9' || argv[0][2] != 0) + bye("invalid compression level", ""); + level = argv[0][1] - '0'; + if (*++argv == NULL) bye("no gzip file name after options", ""); + } + + /* prepare to append to gzip file */ + gd = gzscan(*argv++, &strm, level); + + /* append files on command line, or from stdin if none */ + if (*argv == NULL) + gztack(NULL, gd, &strm, 1); + else + do { + gztack(*argv, gd, &strm, argv[1] == NULL); + } while (*++argv != NULL); + return 0; +} diff --git a/software/scsi2sd-util/zlib-1.2.8/examples/gzjoin.c b/software/scsi2sd-util/zlib-1.2.8/examples/gzjoin.c new file mode 100644 index 0000000..89e8098 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/examples/gzjoin.c @@ -0,0 +1,449 @@ +/* gzjoin -- command to join gzip files into one gzip file + + Copyright (C) 2004, 2005, 2012 Mark Adler, all rights reserved + version 1.2, 14 Aug 2012 + + This software is provided 'as-is', without any express or implied + warranty. In no event will the author be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. + + Mark Adler madler@alumni.caltech.edu + */ + +/* + * Change history: + * + * 1.0 11 Dec 2004 - First version + * 1.1 12 Jun 2005 - Changed ssize_t to long for portability + * 1.2 14 Aug 2012 - Clean up for z_const usage + */ + +/* + gzjoin takes one or more gzip files on the command line and writes out a + single gzip file that will uncompress to the concatenation of the + uncompressed data from the individual gzip files. gzjoin does this without + having to recompress any of the data and without having to calculate a new + crc32 for the concatenated uncompressed data. gzjoin does however have to + decompress all of the input data in order to find the bits in the compressed + data that need to be modified to concatenate the streams. + + gzjoin does not do an integrity check on the input gzip files other than + checking the gzip header and decompressing the compressed data. They are + otherwise assumed to be complete and correct. + + Each joint between gzip files removes at least 18 bytes of previous trailer + and subsequent header, and inserts an average of about three bytes to the + compressed data in order to connect the streams. The output gzip file + has a minimal ten-byte gzip header with no file name or modification time. + + This program was written to illustrate the use of the Z_BLOCK option of + inflate() and the crc32_combine() function. gzjoin will not compile with + versions of zlib earlier than 1.2.3. + */ + +#include /* fputs(), fprintf(), fwrite(), putc() */ +#include /* exit(), malloc(), free() */ +#include /* open() */ +#include /* close(), read(), lseek() */ +#include "zlib.h" + /* crc32(), crc32_combine(), inflateInit2(), inflate(), inflateEnd() */ + +#define local static + +/* exit with an error (return a value to allow use in an expression) */ +local int bail(char *why1, char *why2) +{ + fprintf(stderr, "gzjoin error: %s%s, output incomplete\n", why1, why2); + exit(1); + return 0; +} + +/* -- simple buffered file input with access to the buffer -- */ + +#define CHUNK 32768 /* must be a power of two and fit in unsigned */ + +/* bin buffered input file type */ +typedef struct { + char *name; /* name of file for error messages */ + int fd; /* file descriptor */ + unsigned left; /* bytes remaining at next */ + unsigned char *next; /* next byte to read */ + unsigned char *buf; /* allocated buffer of length CHUNK */ +} bin; + +/* close a buffered file and free allocated memory */ +local void bclose(bin *in) +{ + if (in != NULL) { + if (in->fd != -1) + close(in->fd); + if (in->buf != NULL) + free(in->buf); + free(in); + } +} + +/* open a buffered file for input, return a pointer to type bin, or NULL on + failure */ +local bin *bopen(char *name) +{ + bin *in; + + in = malloc(sizeof(bin)); + if (in == NULL) + return NULL; + in->buf = malloc(CHUNK); + in->fd = open(name, O_RDONLY, 0); + if (in->buf == NULL || in->fd == -1) { + bclose(in); + return NULL; + } + in->left = 0; + in->next = in->buf; + in->name = name; + return in; +} + +/* load buffer from file, return -1 on read error, 0 or 1 on success, with + 1 indicating that end-of-file was reached */ +local int bload(bin *in) +{ + long len; + + if (in == NULL) + return -1; + if (in->left != 0) + return 0; + in->next = in->buf; + do { + len = (long)read(in->fd, in->buf + in->left, CHUNK - in->left); + if (len < 0) + return -1; + in->left += (unsigned)len; + } while (len != 0 && in->left < CHUNK); + return len == 0 ? 1 : 0; +} + +/* get a byte from the file, bail if end of file */ +#define bget(in) (in->left ? 0 : bload(in), \ + in->left ? (in->left--, *(in->next)++) : \ + bail("unexpected end of file on ", in->name)) + +/* get a four-byte little-endian unsigned integer from file */ +local unsigned long bget4(bin *in) +{ + unsigned long val; + + val = bget(in); + val += (unsigned long)(bget(in)) << 8; + val += (unsigned long)(bget(in)) << 16; + val += (unsigned long)(bget(in)) << 24; + return val; +} + +/* skip bytes in file */ +local void bskip(bin *in, unsigned skip) +{ + /* check pointer */ + if (in == NULL) + return; + + /* easy case -- skip bytes in buffer */ + if (skip <= in->left) { + in->left -= skip; + in->next += skip; + return; + } + + /* skip what's in buffer, discard buffer contents */ + skip -= in->left; + in->left = 0; + + /* seek past multiples of CHUNK bytes */ + if (skip > CHUNK) { + unsigned left; + + left = skip & (CHUNK - 1); + if (left == 0) { + /* exact number of chunks: seek all the way minus one byte to check + for end-of-file with a read */ + lseek(in->fd, skip - 1, SEEK_CUR); + if (read(in->fd, in->buf, 1) != 1) + bail("unexpected end of file on ", in->name); + return; + } + + /* skip the integral chunks, update skip with remainder */ + lseek(in->fd, skip - left, SEEK_CUR); + skip = left; + } + + /* read more input and skip remainder */ + bload(in); + if (skip > in->left) + bail("unexpected end of file on ", in->name); + in->left -= skip; + in->next += skip; +} + +/* -- end of buffered input functions -- */ + +/* skip the gzip header from file in */ +local void gzhead(bin *in) +{ + int flags; + + /* verify gzip magic header and compression method */ + if (bget(in) != 0x1f || bget(in) != 0x8b || bget(in) != 8) + bail(in->name, " is not a valid gzip file"); + + /* get and verify flags */ + flags = bget(in); + if ((flags & 0xe0) != 0) + bail("unknown reserved bits set in ", in->name); + + /* skip modification time, extra flags, and os */ + bskip(in, 6); + + /* skip extra field if present */ + if (flags & 4) { + unsigned len; + + len = bget(in); + len += (unsigned)(bget(in)) << 8; + bskip(in, len); + } + + /* skip file name if present */ + if (flags & 8) + while (bget(in) != 0) + ; + + /* skip comment if present */ + if (flags & 16) + while (bget(in) != 0) + ; + + /* skip header crc if present */ + if (flags & 2) + bskip(in, 2); +} + +/* write a four-byte little-endian unsigned integer to out */ +local void put4(unsigned long val, FILE *out) +{ + putc(val & 0xff, out); + putc((val >> 8) & 0xff, out); + putc((val >> 16) & 0xff, out); + putc((val >> 24) & 0xff, out); +} + +/* Load up zlib stream from buffered input, bail if end of file */ +local void zpull(z_streamp strm, bin *in) +{ + if (in->left == 0) + bload(in); + if (in->left == 0) + bail("unexpected end of file on ", in->name); + strm->avail_in = in->left; + strm->next_in = in->next; +} + +/* Write header for gzip file to out and initialize trailer. */ +local void gzinit(unsigned long *crc, unsigned long *tot, FILE *out) +{ + fwrite("\x1f\x8b\x08\0\0\0\0\0\0\xff", 1, 10, out); + *crc = crc32(0L, Z_NULL, 0); + *tot = 0; +} + +/* Copy the compressed data from name, zeroing the last block bit of the last + block if clr is true, and adding empty blocks as needed to get to a byte + boundary. If clr is false, then the last block becomes the last block of + the output, and the gzip trailer is written. crc and tot maintains the + crc and length (modulo 2^32) of the output for the trailer. The resulting + gzip file is written to out. gzinit() must be called before the first call + of gzcopy() to write the gzip header and to initialize crc and tot. */ +local void gzcopy(char *name, int clr, unsigned long *crc, unsigned long *tot, + FILE *out) +{ + int ret; /* return value from zlib functions */ + int pos; /* where the "last block" bit is in byte */ + int last; /* true if processing the last block */ + bin *in; /* buffered input file */ + unsigned char *start; /* start of compressed data in buffer */ + unsigned char *junk; /* buffer for uncompressed data -- discarded */ + z_off_t len; /* length of uncompressed data (support > 4 GB) */ + z_stream strm; /* zlib inflate stream */ + + /* open gzip file and skip header */ + in = bopen(name); + if (in == NULL) + bail("could not open ", name); + gzhead(in); + + /* allocate buffer for uncompressed data and initialize raw inflate + stream */ + junk = malloc(CHUNK); + strm.zalloc = Z_NULL; + strm.zfree = Z_NULL; + strm.opaque = Z_NULL; + strm.avail_in = 0; + strm.next_in = Z_NULL; + ret = inflateInit2(&strm, -15); + if (junk == NULL || ret != Z_OK) + bail("out of memory", ""); + + /* inflate and copy compressed data, clear last-block bit if requested */ + len = 0; + zpull(&strm, in); + start = in->next; + last = start[0] & 1; + if (last && clr) + start[0] &= ~1; + strm.avail_out = 0; + for (;;) { + /* if input used and output done, write used input and get more */ + if (strm.avail_in == 0 && strm.avail_out != 0) { + fwrite(start, 1, strm.next_in - start, out); + start = in->buf; + in->left = 0; + zpull(&strm, in); + } + + /* decompress -- return early when end-of-block reached */ + strm.avail_out = CHUNK; + strm.next_out = junk; + ret = inflate(&strm, Z_BLOCK); + switch (ret) { + case Z_MEM_ERROR: + bail("out of memory", ""); + case Z_DATA_ERROR: + bail("invalid compressed data in ", in->name); + } + + /* update length of uncompressed data */ + len += CHUNK - strm.avail_out; + + /* check for block boundary (only get this when block copied out) */ + if (strm.data_type & 128) { + /* if that was the last block, then done */ + if (last) + break; + + /* number of unused bits in last byte */ + pos = strm.data_type & 7; + + /* find the next last-block bit */ + if (pos != 0) { + /* next last-block bit is in last used byte */ + pos = 0x100 >> pos; + last = strm.next_in[-1] & pos; + if (last && clr) + in->buf[strm.next_in - in->buf - 1] &= ~pos; + } + else { + /* next last-block bit is in next unused byte */ + if (strm.avail_in == 0) { + /* don't have that byte yet -- get it */ + fwrite(start, 1, strm.next_in - start, out); + start = in->buf; + in->left = 0; + zpull(&strm, in); + } + last = strm.next_in[0] & 1; + if (last && clr) + in->buf[strm.next_in - in->buf] &= ~1; + } + } + } + + /* update buffer with unused input */ + in->left = strm.avail_in; + in->next = in->buf + (strm.next_in - in->buf); + + /* copy used input, write empty blocks to get to byte boundary */ + pos = strm.data_type & 7; + fwrite(start, 1, in->next - start - 1, out); + last = in->next[-1]; + if (pos == 0 || !clr) + /* already at byte boundary, or last file: write last byte */ + putc(last, out); + else { + /* append empty blocks to last byte */ + last &= ((0x100 >> pos) - 1); /* assure unused bits are zero */ + if (pos & 1) { + /* odd -- append an empty stored block */ + putc(last, out); + if (pos == 1) + putc(0, out); /* two more bits in block header */ + fwrite("\0\0\xff\xff", 1, 4, out); + } + else { + /* even -- append 1, 2, or 3 empty fixed blocks */ + switch (pos) { + case 6: + putc(last | 8, out); + last = 0; + case 4: + putc(last | 0x20, out); + last = 0; + case 2: + putc(last | 0x80, out); + putc(0, out); + } + } + } + + /* update crc and tot */ + *crc = crc32_combine(*crc, bget4(in), len); + *tot += (unsigned long)len; + + /* clean up */ + inflateEnd(&strm); + free(junk); + bclose(in); + + /* write trailer if this is the last gzip file */ + if (!clr) { + put4(*crc, out); + put4(*tot, out); + } +} + +/* join the gzip files on the command line, write result to stdout */ +int main(int argc, char **argv) +{ + unsigned long crc, tot; /* running crc and total uncompressed length */ + + /* skip command name */ + argc--; + argv++; + + /* show usage if no arguments */ + if (argc == 0) { + fputs("gzjoin usage: gzjoin f1.gz [f2.gz [f3.gz ...]] > fjoin.gz\n", + stderr); + return 0; + } + + /* join gzip files on command line and write to stdout */ + gzinit(&crc, &tot, stdout); + while (argc--) + gzcopy(*argv++, argc, &crc, &tot, stdout); + + /* done */ + return 0; +} diff --git a/software/scsi2sd-util/zlib-1.2.8/examples/gzlog.c b/software/scsi2sd-util/zlib-1.2.8/examples/gzlog.c new file mode 100644 index 0000000..922f878 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/examples/gzlog.c @@ -0,0 +1,1059 @@ +/* + * gzlog.c + * Copyright (C) 2004, 2008, 2012 Mark Adler, all rights reserved + * For conditions of distribution and use, see copyright notice in gzlog.h + * version 2.2, 14 Aug 2012 + */ + +/* + gzlog provides a mechanism for frequently appending short strings to a gzip + file that is efficient both in execution time and compression ratio. The + strategy is to write the short strings in an uncompressed form to the end of + the gzip file, only compressing when the amount of uncompressed data has + reached a given threshold. + + gzlog also provides protection against interruptions in the process due to + system crashes. The status of the operation is recorded in an extra field + in the gzip file, and is only updated once the gzip file is brought to a + valid state. The last data to be appended or compressed is saved in an + auxiliary file, so that if the operation is interrupted, it can be completed + the next time an append operation is attempted. + + gzlog maintains another auxiliary file with the last 32K of data from the + compressed portion, which is preloaded for the compression of the subsequent + data. This minimizes the impact to the compression ratio of appending. + */ + +/* + Operations Concept: + + Files (log name "foo"): + foo.gz -- gzip file with the complete log + foo.add -- last message to append or last data to compress + foo.dict -- dictionary of the last 32K of data for next compression + foo.temp -- temporary dictionary file for compression after this one + foo.lock -- lock file for reading and writing the other files + foo.repairs -- log file for log file recovery operations (not compressed) + + gzip file structure: + - fixed-length (no file name) header with extra field (see below) + - compressed data ending initially with empty stored block + - uncompressed data filling out originally empty stored block and + subsequent stored blocks as needed (16K max each) + - gzip trailer + - no junk at end (no other gzip streams) + + When appending data, the information in the first three items above plus the + foo.add file are sufficient to recover an interrupted append operation. The + extra field has the necessary information to restore the start of the last + stored block and determine where to append the data in the foo.add file, as + well as the crc and length of the gzip data before the append operation. + + The foo.add file is created before the gzip file is marked for append, and + deleted after the gzip file is marked as complete. So if the append + operation is interrupted, the data to add will still be there. If due to + some external force, the foo.add file gets deleted between when the append + operation was interrupted and when recovery is attempted, the gzip file will + still be restored, but without the appended data. + + When compressing data, the information in the first two items above plus the + foo.add file are sufficient to recover an interrupted compress operation. + The extra field has the necessary information to find the end of the + compressed data, and contains both the crc and length of just the compressed + data and of the complete set of data including the contents of the foo.add + file. + + Again, the foo.add file is maintained during the compress operation in case + of an interruption. If in the unlikely event the foo.add file with the data + to be compressed is missing due to some external force, a gzip file with + just the previous compressed data will be reconstructed. In this case, all + of the data that was to be compressed is lost (approximately one megabyte). + This will not occur if all that happened was an interruption of the compress + operation. + + The third state that is marked is the replacement of the old dictionary with + the new dictionary after a compress operation. Once compression is + complete, the gzip file is marked as being in the replace state. This + completes the gzip file, so an interrupt after being so marked does not + result in recompression. Then the dictionary file is replaced, and the gzip + file is marked as completed. This state prevents the possibility of + restarting compression with the wrong dictionary file. + + All three operations are wrapped by a lock/unlock procedure. In order to + gain exclusive access to the log files, first a foo.lock file must be + exclusively created. When all operations are complete, the lock is + released by deleting the foo.lock file. If when attempting to create the + lock file, it already exists and the modify time of the lock file is more + than five minutes old (set by the PATIENCE define below), then the old + lock file is considered stale and deleted, and the exclusive creation of + the lock file is retried. To assure that there are no false assessments + of the staleness of the lock file, the operations periodically touch the + lock file to update the modified date. + + Following is the definition of the extra field with all of the information + required to enable the above append and compress operations and their + recovery if interrupted. Multi-byte values are stored little endian + (consistent with the gzip format). File pointers are eight bytes long. + The crc's and lengths for the gzip trailer are four bytes long. (Note that + the length at the end of a gzip file is used for error checking only, and + for large files is actually the length modulo 2^32.) The stored block + length is two bytes long. The gzip extra field two-byte identification is + "ap" for append. It is assumed that writing the extra field to the file is + an "atomic" operation. That is, either all of the extra field is written + to the file, or none of it is, if the operation is interrupted right at the + point of updating the extra field. This is a reasonable assumption, since + the extra field is within the first 52 bytes of the file, which is smaller + than any expected block size for a mass storage device (usually 512 bytes or + larger). + + Extra field (35 bytes): + - Pointer to first stored block length -- this points to the two-byte length + of the first stored block, which is followed by the two-byte, one's + complement of that length. The stored block length is preceded by the + three-bit header of the stored block, which is the actual start of the + stored block in the deflate format. See the bit offset field below. + - Pointer to the last stored block length. This is the same as above, but + for the last stored block of the uncompressed data in the gzip file. + Initially this is the same as the first stored block length pointer. + When the stored block gets to 16K (see the MAX_STORE define), then a new + stored block as added, at which point the last stored block length pointer + is different from the first stored block length pointer. When they are + different, the first bit of the last stored block header is eight bits, or + one byte back from the block length. + - Compressed data crc and length. This is the crc and length of the data + that is in the compressed portion of the deflate stream. These are used + only in the event that the foo.add file containing the data to compress is + lost after a compress operation is interrupted. + - Total data crc and length. This is the crc and length of all of the data + stored in the gzip file, compressed and uncompressed. It is used to + reconstruct the gzip trailer when compressing, as well as when recovering + interrupted operations. + - Final stored block length. This is used to quickly find where to append, + and allows the restoration of the original final stored block state when + an append operation is interrupted. + - First stored block start as the number of bits back from the final stored + block first length byte. This value is in the range of 3..10, and is + stored as the low three bits of the final byte of the extra field after + subtracting three (0..7). This allows the last-block bit of the stored + block header to be updated when a new stored block is added, for the case + when the first stored block and the last stored block are the same. (When + they are different, the numbers of bits back is known to be eight.) This + also allows for new compressed data to be appended to the old compressed + data in the compress operation, overwriting the previous first stored + block, or for the compressed data to be terminated and a valid gzip file + reconstructed on the off chance that a compression operation was + interrupted and the data to compress in the foo.add file was deleted. + - The operation in process. This is the next two bits in the last byte (the + bits under the mask 0x18). The are interpreted as 0: nothing in process, + 1: append in process, 2: compress in process, 3: replace in process. + - The top three bits of the last byte in the extra field are reserved and + are currently set to zero. + + Main procedure: + - Exclusively create the foo.lock file using the O_CREAT and O_EXCL modes of + the system open() call. If the modify time of an existing lock file is + more than PATIENCE seconds old, then the lock file is deleted and the + exclusive create is retried. + - Load the extra field from the foo.gz file, and see if an operation was in + progress but not completed. If so, apply the recovery procedure below. + - Perform the append procedure with the provided data. + - If the uncompressed data in the foo.gz file is 1MB or more, apply the + compress procedure. + - Delete the foo.lock file. + + Append procedure: + - Put what to append in the foo.add file so that the operation can be + restarted if this procedure is interrupted. + - Mark the foo.gz extra field with the append operation in progress. + + Restore the original last-block bit and stored block length of the last + stored block from the information in the extra field, in case a previous + append operation was interrupted. + - Append the provided data to the last stored block, creating new stored + blocks as needed and updating the stored blocks last-block bits and + lengths. + - Update the crc and length with the new data, and write the gzip trailer. + - Write over the extra field (with a single write operation) with the new + pointers, lengths, and crc's, and mark the gzip file as not in process. + Though there is still a foo.add file, it will be ignored since nothing + is in process. If a foo.add file is leftover from a previously + completed operation, it is truncated when writing new data to it. + - Delete the foo.add file. + + Compress and replace procedures: + - Read all of the uncompressed data in the stored blocks in foo.gz and write + it to foo.add. Also write foo.temp with the last 32K of that data to + provide a dictionary for the next invocation of this procedure. + - Rewrite the extra field marking foo.gz with a compression in process. + * If there is no data provided to compress (due to a missing foo.add file + when recovering), reconstruct and truncate the foo.gz file to contain + only the previous compressed data and proceed to the step after the next + one. Otherwise ... + - Compress the data with the dictionary in foo.dict, and write to the + foo.gz file starting at the bit immediately following the last previously + compressed block. If there is no foo.dict, proceed anyway with the + compression at slightly reduced efficiency. (For the foo.dict file to be + missing requires some external failure beyond simply the interruption of + a compress operation.) During this process, the foo.lock file is + periodically touched to assure that that file is not considered stale by + another process before we're done. The deflation is terminated with a + non-last empty static block (10 bits long), that is then located and + written over by a last-bit-set empty stored block. + - Append the crc and length of the data in the gzip file (previously + calculated during the append operations). + - Write over the extra field with the updated stored block offsets, bits + back, crc's, and lengths, and mark foo.gz as in process for a replacement + of the dictionary. + @ Delete the foo.add file. + - Replace foo.dict with foo.temp. + - Write over the extra field, marking foo.gz as complete. + + Recovery procedure: + - If not a replace recovery, read in the foo.add file, and provide that data + to the appropriate recovery below. If there is no foo.add file, provide + a zero data length to the recovery. In that case, the append recovery + restores the foo.gz to the previous compressed + uncompressed data state. + For the the compress recovery, a missing foo.add file results in foo.gz + being restored to the previous compressed-only data state. + - Append recovery: + - Pick up append at + step above + - Compress recovery: + - Pick up compress at * step above + - Replace recovery: + - Pick up compress at @ step above + - Log the repair with a date stamp in foo.repairs + */ + +#include +#include /* rename, fopen, fprintf, fclose */ +#include /* malloc, free */ +#include /* strlen, strrchr, strcpy, strncpy, strcmp */ +#include /* open */ +#include /* lseek, read, write, close, unlink, sleep, */ + /* ftruncate, fsync */ +#include /* errno */ +#include /* time, ctime */ +#include /* stat */ +#include /* utimes */ +#include "zlib.h" /* crc32 */ + +#include "gzlog.h" /* header for external access */ + +#define local static +typedef unsigned int uint; +typedef unsigned long ulong; + +/* Macro for debugging to deterministically force recovery operations */ +#ifdef DEBUG + #include /* longjmp */ + jmp_buf gzlog_jump; /* where to go back to */ + int gzlog_bail = 0; /* which point to bail at (1..8) */ + int gzlog_count = -1; /* number of times through to wait */ +# define BAIL(n) do { if (n == gzlog_bail && gzlog_count-- == 0) \ + longjmp(gzlog_jump, gzlog_bail); } while (0) +#else +# define BAIL(n) +#endif + +/* how old the lock file can be in seconds before considering it stale */ +#define PATIENCE 300 + +/* maximum stored block size in Kbytes -- must be in 1..63 */ +#define MAX_STORE 16 + +/* number of stored Kbytes to trigger compression (must be >= 32 to allow + dictionary construction, and <= 204 * MAX_STORE, in order for >> 10 to + discard the stored block headers contribution of five bytes each) */ +#define TRIGGER 1024 + +/* size of a deflate dictionary (this cannot be changed) */ +#define DICT 32768U + +/* values for the operation (2 bits) */ +#define NO_OP 0 +#define APPEND_OP 1 +#define COMPRESS_OP 2 +#define REPLACE_OP 3 + +/* macros to extract little-endian integers from an unsigned byte buffer */ +#define PULL2(p) ((p)[0]+((uint)((p)[1])<<8)) +#define PULL4(p) (PULL2(p)+((ulong)PULL2(p+2)<<16)) +#define PULL8(p) (PULL4(p)+((off_t)PULL4(p+4)<<32)) + +/* macros to store integers into a byte buffer in little-endian order */ +#define PUT2(p,a) do {(p)[0]=a;(p)[1]=(a)>>8;} while(0) +#define PUT4(p,a) do {PUT2(p,a);PUT2(p+2,a>>16);} while(0) +#define PUT8(p,a) do {PUT4(p,a);PUT4(p+4,a>>32);} while(0) + +/* internal structure for log information */ +#define LOGID "\106\035\172" /* should be three non-zero characters */ +struct log { + char id[4]; /* contains LOGID to detect inadvertent overwrites */ + int fd; /* file descriptor for .gz file, opened read/write */ + char *path; /* allocated path, e.g. "/var/log/foo" or "foo" */ + char *end; /* end of path, for appending suffices such as ".gz" */ + off_t first; /* offset of first stored block first length byte */ + int back; /* location of first block id in bits back from first */ + uint stored; /* bytes currently in last stored block */ + off_t last; /* offset of last stored block first length byte */ + ulong ccrc; /* crc of compressed data */ + ulong clen; /* length (modulo 2^32) of compressed data */ + ulong tcrc; /* crc of total data */ + ulong tlen; /* length (modulo 2^32) of total data */ + time_t lock; /* last modify time of our lock file */ +}; + +/* gzip header for gzlog */ +local unsigned char log_gzhead[] = { + 0x1f, 0x8b, /* magic gzip id */ + 8, /* compression method is deflate */ + 4, /* there is an extra field (no file name) */ + 0, 0, 0, 0, /* no modification time provided */ + 0, 0xff, /* no extra flags, no OS specified */ + 39, 0, 'a', 'p', 35, 0 /* extra field with "ap" subfield */ + /* 35 is EXTRA, 39 is EXTRA + 4 */ +}; + +#define HEAD sizeof(log_gzhead) /* should be 16 */ + +/* initial gzip extra field content (52 == HEAD + EXTRA + 1) */ +local unsigned char log_gzext[] = { + 52, 0, 0, 0, 0, 0, 0, 0, /* offset of first stored block length */ + 52, 0, 0, 0, 0, 0, 0, 0, /* offset of last stored block length */ + 0, 0, 0, 0, 0, 0, 0, 0, /* compressed data crc and length */ + 0, 0, 0, 0, 0, 0, 0, 0, /* total data crc and length */ + 0, 0, /* final stored block data length */ + 5 /* op is NO_OP, last bit 8 bits back */ +}; + +#define EXTRA sizeof(log_gzext) /* should be 35 */ + +/* initial gzip data and trailer */ +local unsigned char log_gzbody[] = { + 1, 0, 0, 0xff, 0xff, /* empty stored block (last) */ + 0, 0, 0, 0, /* crc */ + 0, 0, 0, 0 /* uncompressed length */ +}; + +#define BODY sizeof(log_gzbody) + +/* Exclusively create foo.lock in order to negotiate exclusive access to the + foo.* files. If the modify time of an existing lock file is greater than + PATIENCE seconds in the past, then consider the lock file to have been + abandoned, delete it, and try the exclusive create again. Save the lock + file modify time for verification of ownership. Return 0 on success, or -1 + on failure, usually due to an access restriction or invalid path. Note that + if stat() or unlink() fails, it may be due to another process noticing the + abandoned lock file a smidge sooner and deleting it, so those are not + flagged as an error. */ +local int log_lock(struct log *log) +{ + int fd; + struct stat st; + + strcpy(log->end, ".lock"); + while ((fd = open(log->path, O_CREAT | O_EXCL, 0644)) < 0) { + if (errno != EEXIST) + return -1; + if (stat(log->path, &st) == 0 && time(NULL) - st.st_mtime > PATIENCE) { + unlink(log->path); + continue; + } + sleep(2); /* relinquish the CPU for two seconds while waiting */ + } + close(fd); + if (stat(log->path, &st) == 0) + log->lock = st.st_mtime; + return 0; +} + +/* Update the modify time of the lock file to now, in order to prevent another + task from thinking that the lock is stale. Save the lock file modify time + for verification of ownership. */ +local void log_touch(struct log *log) +{ + struct stat st; + + strcpy(log->end, ".lock"); + utimes(log->path, NULL); + if (stat(log->path, &st) == 0) + log->lock = st.st_mtime; +} + +/* Check the log file modify time against what is expected. Return true if + this is not our lock. If it is our lock, touch it to keep it. */ +local int log_check(struct log *log) +{ + struct stat st; + + strcpy(log->end, ".lock"); + if (stat(log->path, &st) || st.st_mtime != log->lock) + return 1; + log_touch(log); + return 0; +} + +/* Unlock a previously acquired lock, but only if it's ours. */ +local void log_unlock(struct log *log) +{ + if (log_check(log)) + return; + strcpy(log->end, ".lock"); + unlink(log->path); + log->lock = 0; +} + +/* Check the gzip header and read in the extra field, filling in the values in + the log structure. Return op on success or -1 if the gzip header was not as + expected. op is the current operation in progress last written to the extra + field. This assumes that the gzip file has already been opened, with the + file descriptor log->fd. */ +local int log_head(struct log *log) +{ + int op; + unsigned char buf[HEAD + EXTRA]; + + if (lseek(log->fd, 0, SEEK_SET) < 0 || + read(log->fd, buf, HEAD + EXTRA) != HEAD + EXTRA || + memcmp(buf, log_gzhead, HEAD)) { + return -1; + } + log->first = PULL8(buf + HEAD); + log->last = PULL8(buf + HEAD + 8); + log->ccrc = PULL4(buf + HEAD + 16); + log->clen = PULL4(buf + HEAD + 20); + log->tcrc = PULL4(buf + HEAD + 24); + log->tlen = PULL4(buf + HEAD + 28); + log->stored = PULL2(buf + HEAD + 32); + log->back = 3 + (buf[HEAD + 34] & 7); + op = (buf[HEAD + 34] >> 3) & 3; + return op; +} + +/* Write over the extra field contents, marking the operation as op. Use fsync + to assure that the device is written to, and in the requested order. This + operation, and only this operation, is assumed to be atomic in order to + assure that the log is recoverable in the event of an interruption at any + point in the process. Return -1 if the write to foo.gz failed. */ +local int log_mark(struct log *log, int op) +{ + int ret; + unsigned char ext[EXTRA]; + + PUT8(ext, log->first); + PUT8(ext + 8, log->last); + PUT4(ext + 16, log->ccrc); + PUT4(ext + 20, log->clen); + PUT4(ext + 24, log->tcrc); + PUT4(ext + 28, log->tlen); + PUT2(ext + 32, log->stored); + ext[34] = log->back - 3 + (op << 3); + fsync(log->fd); + ret = lseek(log->fd, HEAD, SEEK_SET) < 0 || + write(log->fd, ext, EXTRA) != EXTRA ? -1 : 0; + fsync(log->fd); + return ret; +} + +/* Rewrite the last block header bits and subsequent zero bits to get to a byte + boundary, setting the last block bit if last is true, and then write the + remainder of the stored block header (length and one's complement). Leave + the file pointer after the end of the last stored block data. Return -1 if + there is a read or write failure on the foo.gz file */ +local int log_last(struct log *log, int last) +{ + int back, len, mask; + unsigned char buf[6]; + + /* determine the locations of the bytes and bits to modify */ + back = log->last == log->first ? log->back : 8; + len = back > 8 ? 2 : 1; /* bytes back from log->last */ + mask = 0x80 >> ((back - 1) & 7); /* mask for block last-bit */ + + /* get the byte to modify (one or two back) into buf[0] -- don't need to + read the byte if the last-bit is eight bits back, since in that case + the entire byte will be modified */ + buf[0] = 0; + if (back != 8 && (lseek(log->fd, log->last - len, SEEK_SET) < 0 || + read(log->fd, buf, 1) != 1)) + return -1; + + /* change the last-bit of the last stored block as requested -- note + that all bits above the last-bit are set to zero, per the type bits + of a stored block being 00 and per the convention that the bits to + bring the stream to a byte boundary are also zeros */ + buf[1] = 0; + buf[2 - len] = (*buf & (mask - 1)) + (last ? mask : 0); + + /* write the modified stored block header and lengths, move the file + pointer to after the last stored block data */ + PUT2(buf + 2, log->stored); + PUT2(buf + 4, log->stored ^ 0xffff); + return lseek(log->fd, log->last - len, SEEK_SET) < 0 || + write(log->fd, buf + 2 - len, len + 4) != len + 4 || + lseek(log->fd, log->stored, SEEK_CUR) < 0 ? -1 : 0; +} + +/* Append len bytes from data to the locked and open log file. len may be zero + if recovering and no .add file was found. In that case, the previous state + of the foo.gz file is restored. The data is appended uncompressed in + deflate stored blocks. Return -1 if there was an error reading or writing + the foo.gz file. */ +local int log_append(struct log *log, unsigned char *data, size_t len) +{ + uint put; + off_t end; + unsigned char buf[8]; + + /* set the last block last-bit and length, in case recovering an + interrupted append, then position the file pointer to append to the + block */ + if (log_last(log, 1)) + return -1; + + /* append, adding stored blocks and updating the offset of the last stored + block as needed, and update the total crc and length */ + while (len) { + /* append as much as we can to the last block */ + put = (MAX_STORE << 10) - log->stored; + if (put > len) + put = (uint)len; + if (put) { + if (write(log->fd, data, put) != put) + return -1; + BAIL(1); + log->tcrc = crc32(log->tcrc, data, put); + log->tlen += put; + log->stored += put; + data += put; + len -= put; + } + + /* if we need to, add a new empty stored block */ + if (len) { + /* mark current block as not last */ + if (log_last(log, 0)) + return -1; + + /* point to new, empty stored block */ + log->last += 4 + log->stored + 1; + log->stored = 0; + } + + /* mark last block as last, update its length */ + if (log_last(log, 1)) + return -1; + BAIL(2); + } + + /* write the new crc and length trailer, and truncate just in case (could + be recovering from partial append with a missing foo.add file) */ + PUT4(buf, log->tcrc); + PUT4(buf + 4, log->tlen); + if (write(log->fd, buf, 8) != 8 || + (end = lseek(log->fd, 0, SEEK_CUR)) < 0 || ftruncate(log->fd, end)) + return -1; + + /* write the extra field, marking the log file as done, delete .add file */ + if (log_mark(log, NO_OP)) + return -1; + strcpy(log->end, ".add"); + unlink(log->path); /* ignore error, since may not exist */ + return 0; +} + +/* Replace the foo.dict file with the foo.temp file. Also delete the foo.add + file, since the compress operation may have been interrupted before that was + done. Returns 1 if memory could not be allocated, or -1 if reading or + writing foo.gz fails, or if the rename fails for some reason other than + foo.temp not existing. foo.temp not existing is a permitted error, since + the replace operation may have been interrupted after the rename is done, + but before foo.gz is marked as complete. */ +local int log_replace(struct log *log) +{ + int ret; + char *dest; + + /* delete foo.add file */ + strcpy(log->end, ".add"); + unlink(log->path); /* ignore error, since may not exist */ + BAIL(3); + + /* rename foo.name to foo.dict, replacing foo.dict if it exists */ + strcpy(log->end, ".dict"); + dest = malloc(strlen(log->path) + 1); + if (dest == NULL) + return -2; + strcpy(dest, log->path); + strcpy(log->end, ".temp"); + ret = rename(log->path, dest); + free(dest); + if (ret && errno != ENOENT) + return -1; + BAIL(4); + + /* mark the foo.gz file as done */ + return log_mark(log, NO_OP); +} + +/* Compress the len bytes at data and append the compressed data to the + foo.gz deflate data immediately after the previous compressed data. This + overwrites the previous uncompressed data, which was stored in foo.add + and is the data provided in data[0..len-1]. If this operation is + interrupted, it picks up at the start of this routine, with the foo.add + file read in again. If there is no data to compress (len == 0), then we + simply terminate the foo.gz file after the previously compressed data, + appending a final empty stored block and the gzip trailer. Return -1 if + reading or writing the log.gz file failed, or -2 if there was a memory + allocation failure. */ +local int log_compress(struct log *log, unsigned char *data, size_t len) +{ + int fd; + uint got, max; + ssize_t dict; + off_t end; + z_stream strm; + unsigned char buf[DICT]; + + /* compress and append compressed data */ + if (len) { + /* set up for deflate, allocating memory */ + strm.zalloc = Z_NULL; + strm.zfree = Z_NULL; + strm.opaque = Z_NULL; + if (deflateInit2(&strm, Z_DEFAULT_COMPRESSION, Z_DEFLATED, -15, 8, + Z_DEFAULT_STRATEGY) != Z_OK) + return -2; + + /* read in dictionary (last 32K of data that was compressed) */ + strcpy(log->end, ".dict"); + fd = open(log->path, O_RDONLY, 0); + if (fd >= 0) { + dict = read(fd, buf, DICT); + close(fd); + if (dict < 0) { + deflateEnd(&strm); + return -1; + } + if (dict) + deflateSetDictionary(&strm, buf, (uint)dict); + } + log_touch(log); + + /* prime deflate with last bits of previous block, position write + pointer to write those bits and overwrite what follows */ + if (lseek(log->fd, log->first - (log->back > 8 ? 2 : 1), + SEEK_SET) < 0 || + read(log->fd, buf, 1) != 1 || lseek(log->fd, -1, SEEK_CUR) < 0) { + deflateEnd(&strm); + return -1; + } + deflatePrime(&strm, (8 - log->back) & 7, *buf); + + /* compress, finishing with a partial non-last empty static block */ + strm.next_in = data; + max = (((uint)0 - 1) >> 1) + 1; /* in case int smaller than size_t */ + do { + strm.avail_in = len > max ? max : (uint)len; + len -= strm.avail_in; + do { + strm.avail_out = DICT; + strm.next_out = buf; + deflate(&strm, len ? Z_NO_FLUSH : Z_PARTIAL_FLUSH); + got = DICT - strm.avail_out; + if (got && write(log->fd, buf, got) != got) { + deflateEnd(&strm); + return -1; + } + log_touch(log); + } while (strm.avail_out == 0); + } while (len); + deflateEnd(&strm); + BAIL(5); + + /* find start of empty static block -- scanning backwards the first one + bit is the second bit of the block, if the last byte is zero, then + we know the byte before that has a one in the top bit, since an + empty static block is ten bits long */ + if ((log->first = lseek(log->fd, -1, SEEK_CUR)) < 0 || + read(log->fd, buf, 1) != 1) + return -1; + log->first++; + if (*buf) { + log->back = 1; + while ((*buf & ((uint)1 << (8 - log->back++))) == 0) + ; /* guaranteed to terminate, since *buf != 0 */ + } + else + log->back = 10; + + /* update compressed crc and length */ + log->ccrc = log->tcrc; + log->clen = log->tlen; + } + else { + /* no data to compress -- fix up existing gzip stream */ + log->tcrc = log->ccrc; + log->tlen = log->clen; + } + + /* complete and truncate gzip stream */ + log->last = log->first; + log->stored = 0; + PUT4(buf, log->tcrc); + PUT4(buf + 4, log->tlen); + if (log_last(log, 1) || write(log->fd, buf, 8) != 8 || + (end = lseek(log->fd, 0, SEEK_CUR)) < 0 || ftruncate(log->fd, end)) + return -1; + BAIL(6); + + /* mark as being in the replace operation */ + if (log_mark(log, REPLACE_OP)) + return -1; + + /* execute the replace operation and mark the file as done */ + return log_replace(log); +} + +/* log a repair record to the .repairs file */ +local void log_log(struct log *log, int op, char *record) +{ + time_t now; + FILE *rec; + + now = time(NULL); + strcpy(log->end, ".repairs"); + rec = fopen(log->path, "a"); + if (rec == NULL) + return; + fprintf(rec, "%.24s %s recovery: %s\n", ctime(&now), op == APPEND_OP ? + "append" : (op == COMPRESS_OP ? "compress" : "replace"), record); + fclose(rec); + return; +} + +/* Recover the interrupted operation op. First read foo.add for recovering an + append or compress operation. Return -1 if there was an error reading or + writing foo.gz or reading an existing foo.add, or -2 if there was a memory + allocation failure. */ +local int log_recover(struct log *log, int op) +{ + int fd, ret = 0; + unsigned char *data = NULL; + size_t len = 0; + struct stat st; + + /* log recovery */ + log_log(log, op, "start"); + + /* load foo.add file if expected and present */ + if (op == APPEND_OP || op == COMPRESS_OP) { + strcpy(log->end, ".add"); + if (stat(log->path, &st) == 0 && st.st_size) { + len = (size_t)(st.st_size); + if ((off_t)len != st.st_size || + (data = malloc(st.st_size)) == NULL) { + log_log(log, op, "allocation failure"); + return -2; + } + if ((fd = open(log->path, O_RDONLY, 0)) < 0) { + log_log(log, op, ".add file read failure"); + return -1; + } + ret = (size_t)read(fd, data, len) != len; + close(fd); + if (ret) { + log_log(log, op, ".add file read failure"); + return -1; + } + log_log(log, op, "loaded .add file"); + } + else + log_log(log, op, "missing .add file!"); + } + + /* recover the interrupted operation */ + switch (op) { + case APPEND_OP: + ret = log_append(log, data, len); + break; + case COMPRESS_OP: + ret = log_compress(log, data, len); + break; + case REPLACE_OP: + ret = log_replace(log); + } + + /* log status */ + log_log(log, op, ret ? "failure" : "complete"); + + /* clean up */ + if (data != NULL) + free(data); + return ret; +} + +/* Close the foo.gz file (if open) and release the lock. */ +local void log_close(struct log *log) +{ + if (log->fd >= 0) + close(log->fd); + log->fd = -1; + log_unlock(log); +} + +/* Open foo.gz, verify the header, and load the extra field contents, after + first creating the foo.lock file to gain exclusive access to the foo.* + files. If foo.gz does not exist or is empty, then write the initial header, + extra, and body content of an empty foo.gz log file. If there is an error + creating the lock file due to access restrictions, or an error reading or + writing the foo.gz file, or if the foo.gz file is not a proper log file for + this object (e.g. not a gzip file or does not contain the expected extra + field), then return true. If there is an error, the lock is released. + Otherwise, the lock is left in place. */ +local int log_open(struct log *log) +{ + int op; + + /* release open file resource if left over -- can occur if lock lost + between gzlog_open() and gzlog_write() */ + if (log->fd >= 0) + close(log->fd); + log->fd = -1; + + /* negotiate exclusive access */ + if (log_lock(log) < 0) + return -1; + + /* open the log file, foo.gz */ + strcpy(log->end, ".gz"); + log->fd = open(log->path, O_RDWR | O_CREAT, 0644); + if (log->fd < 0) { + log_close(log); + return -1; + } + + /* if new, initialize foo.gz with an empty log, delete old dictionary */ + if (lseek(log->fd, 0, SEEK_END) == 0) { + if (write(log->fd, log_gzhead, HEAD) != HEAD || + write(log->fd, log_gzext, EXTRA) != EXTRA || + write(log->fd, log_gzbody, BODY) != BODY) { + log_close(log); + return -1; + } + strcpy(log->end, ".dict"); + unlink(log->path); + } + + /* verify log file and load extra field information */ + if ((op = log_head(log)) < 0) { + log_close(log); + return -1; + } + + /* check for interrupted process and if so, recover */ + if (op != NO_OP && log_recover(log, op)) { + log_close(log); + return -1; + } + + /* touch the lock file to prevent another process from grabbing it */ + log_touch(log); + return 0; +} + +/* See gzlog.h for the description of the external methods below */ +gzlog *gzlog_open(char *path) +{ + size_t n; + struct log *log; + + /* check arguments */ + if (path == NULL || *path == 0) + return NULL; + + /* allocate and initialize log structure */ + log = malloc(sizeof(struct log)); + if (log == NULL) + return NULL; + strcpy(log->id, LOGID); + log->fd = -1; + + /* save path and end of path for name construction */ + n = strlen(path); + log->path = malloc(n + 9); /* allow for ".repairs" */ + if (log->path == NULL) { + free(log); + return NULL; + } + strcpy(log->path, path); + log->end = log->path + n; + + /* gain exclusive access and verify log file -- may perform a + recovery operation if needed */ + if (log_open(log)) { + free(log->path); + free(log); + return NULL; + } + + /* return pointer to log structure */ + return log; +} + +/* gzlog_compress() return values: + 0: all good + -1: file i/o error (usually access issue) + -2: memory allocation failure + -3: invalid log pointer argument */ +int gzlog_compress(gzlog *logd) +{ + int fd, ret; + uint block; + size_t len, next; + unsigned char *data, buf[5]; + struct log *log = logd; + + /* check arguments */ + if (log == NULL || strcmp(log->id, LOGID)) + return -3; + + /* see if we lost the lock -- if so get it again and reload the extra + field information (it probably changed), recover last operation if + necessary */ + if (log_check(log) && log_open(log)) + return -1; + + /* create space for uncompressed data */ + len = ((size_t)(log->last - log->first) & ~(((size_t)1 << 10) - 1)) + + log->stored; + if ((data = malloc(len)) == NULL) + return -2; + + /* do statement here is just a cheap trick for error handling */ + do { + /* read in the uncompressed data */ + if (lseek(log->fd, log->first - 1, SEEK_SET) < 0) + break; + next = 0; + while (next < len) { + if (read(log->fd, buf, 5) != 5) + break; + block = PULL2(buf + 1); + if (next + block > len || + read(log->fd, (char *)data + next, block) != block) + break; + next += block; + } + if (lseek(log->fd, 0, SEEK_CUR) != log->last + 4 + log->stored) + break; + log_touch(log); + + /* write the uncompressed data to the .add file */ + strcpy(log->end, ".add"); + fd = open(log->path, O_WRONLY | O_CREAT | O_TRUNC, 0644); + if (fd < 0) + break; + ret = (size_t)write(fd, data, len) != len; + if (ret | close(fd)) + break; + log_touch(log); + + /* write the dictionary for the next compress to the .temp file */ + strcpy(log->end, ".temp"); + fd = open(log->path, O_WRONLY | O_CREAT | O_TRUNC, 0644); + if (fd < 0) + break; + next = DICT > len ? len : DICT; + ret = (size_t)write(fd, (char *)data + len - next, next) != next; + if (ret | close(fd)) + break; + log_touch(log); + + /* roll back to compressed data, mark the compress in progress */ + log->last = log->first; + log->stored = 0; + if (log_mark(log, COMPRESS_OP)) + break; + BAIL(7); + + /* compress and append the data (clears mark) */ + ret = log_compress(log, data, len); + free(data); + return ret; + } while (0); + + /* broke out of do above on i/o error */ + free(data); + return -1; +} + +/* gzlog_write() return values: + 0: all good + -1: file i/o error (usually access issue) + -2: memory allocation failure + -3: invalid log pointer argument */ +int gzlog_write(gzlog *logd, void *data, size_t len) +{ + int fd, ret; + struct log *log = logd; + + /* check arguments */ + if (log == NULL || strcmp(log->id, LOGID)) + return -3; + if (data == NULL || len <= 0) + return 0; + + /* see if we lost the lock -- if so get it again and reload the extra + field information (it probably changed), recover last operation if + necessary */ + if (log_check(log) && log_open(log)) + return -1; + + /* create and write .add file */ + strcpy(log->end, ".add"); + fd = open(log->path, O_WRONLY | O_CREAT | O_TRUNC, 0644); + if (fd < 0) + return -1; + ret = (size_t)write(fd, data, len) != len; + if (ret | close(fd)) + return -1; + log_touch(log); + + /* mark log file with append in progress */ + if (log_mark(log, APPEND_OP)) + return -1; + BAIL(8); + + /* append data (clears mark) */ + if (log_append(log, data, len)) + return -1; + + /* check to see if it's time to compress -- if not, then done */ + if (((log->last - log->first) >> 10) + (log->stored >> 10) < TRIGGER) + return 0; + + /* time to compress */ + return gzlog_compress(log); +} + +/* gzlog_close() return values: + 0: ok + -3: invalid log pointer argument */ +int gzlog_close(gzlog *logd) +{ + struct log *log = logd; + + /* check arguments */ + if (log == NULL || strcmp(log->id, LOGID)) + return -3; + + /* close the log file and release the lock */ + log_close(log); + + /* free structure and return */ + if (log->path != NULL) + free(log->path); + strcpy(log->id, "bad"); + free(log); + return 0; +} diff --git a/software/scsi2sd-util/zlib-1.2.8/examples/gzlog.h b/software/scsi2sd-util/zlib-1.2.8/examples/gzlog.h new file mode 100644 index 0000000..86f0cec --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/examples/gzlog.h @@ -0,0 +1,91 @@ +/* gzlog.h + Copyright (C) 2004, 2008, 2012 Mark Adler, all rights reserved + version 2.2, 14 Aug 2012 + + This software is provided 'as-is', without any express or implied + warranty. In no event will the author be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. + + Mark Adler madler@alumni.caltech.edu + */ + +/* Version History: + 1.0 26 Nov 2004 First version + 2.0 25 Apr 2008 Complete redesign for recovery of interrupted operations + Interface changed slightly in that now path is a prefix + Compression now occurs as needed during gzlog_write() + gzlog_write() now always leaves the log file as valid gzip + 2.1 8 Jul 2012 Fix argument checks in gzlog_compress() and gzlog_write() + 2.2 14 Aug 2012 Clean up signed comparisons + */ + +/* + The gzlog object allows writing short messages to a gzipped log file, + opening the log file locked for small bursts, and then closing it. The log + object works by appending stored (uncompressed) data to the gzip file until + 1 MB has been accumulated. At that time, the stored data is compressed, and + replaces the uncompressed data in the file. The log file is truncated to + its new size at that time. After each write operation, the log file is a + valid gzip file that can decompressed to recover what was written. + + The gzlog operations can be interupted at any point due to an application or + system crash, and the log file will be recovered the next time the log is + opened with gzlog_open(). + */ + +#ifndef GZLOG_H +#define GZLOG_H + +/* gzlog object type */ +typedef void gzlog; + +/* Open a gzlog object, creating the log file if it does not exist. Return + NULL on error. Note that gzlog_open() could take a while to complete if it + has to wait to verify that a lock is stale (possibly for five minutes), or + if there is significant contention with other instantiations of this object + when locking the resource. path is the prefix of the file names created by + this object. If path is "foo", then the log file will be "foo.gz", and + other auxiliary files will be created and destroyed during the process: + "foo.dict" for a compression dictionary, "foo.temp" for a temporary (next) + dictionary, "foo.add" for data being added or compressed, "foo.lock" for the + lock file, and "foo.repairs" to log recovery operations performed due to + interrupted gzlog operations. A gzlog_open() followed by a gzlog_close() + will recover a previously interrupted operation, if any. */ +gzlog *gzlog_open(char *path); + +/* Write to a gzlog object. Return zero on success, -1 if there is a file i/o + error on any of the gzlog files (this should not happen if gzlog_open() + succeeded, unless the device has run out of space or leftover auxiliary + files have permissions or ownership that prevent their use), -2 if there is + a memory allocation failure, or -3 if the log argument is invalid (e.g. if + it was not created by gzlog_open()). This function will write data to the + file uncompressed, until 1 MB has been accumulated, at which time that data + will be compressed. The log file will be a valid gzip file upon successful + return. */ +int gzlog_write(gzlog *log, void *data, size_t len); + +/* Force compression of any uncompressed data in the log. This should be used + sparingly, if at all. The main application would be when a log file will + not be appended to again. If this is used to compress frequently while + appending, it will both significantly increase the execution time and + reduce the compression ratio. The return codes are the same as for + gzlog_write(). */ +int gzlog_compress(gzlog *log); + +/* Close a gzlog object. Return zero on success, -3 if the log argument is + invalid. The log object is freed, and so cannot be referenced again. */ +int gzlog_close(gzlog *log); + +#endif diff --git a/software/scsi2sd-util/zlib-1.2.8/examples/zlib_how.html b/software/scsi2sd-util/zlib-1.2.8/examples/zlib_how.html new file mode 100644 index 0000000..444ff1c --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/examples/zlib_how.html @@ -0,0 +1,545 @@ + + + + +zlib Usage Example + + + +

zlib Usage Example

+We often get questions about how the deflate() and inflate() functions should be used. +Users wonder when they should provide more input, when they should use more output, +what to do with a Z_BUF_ERROR, how to make sure the process terminates properly, and +so on. So for those who have read zlib.h (a few times), and +would like further edification, below is an annotated example in C of simple routines to compress and decompress +from an input file to an output file using deflate() and inflate() respectively. The +annotations are interspersed between lines of the code. So please read between the lines. +We hope this helps explain some of the intricacies of zlib. +

+Without further adieu, here is the program zpipe.c: +


+/* zpipe.c: example of proper use of zlib's inflate() and deflate()
+   Not copyrighted -- provided to the public domain
+   Version 1.4  11 December 2005  Mark Adler */
+
+/* Version history:
+   1.0  30 Oct 2004  First version
+   1.1   8 Nov 2004  Add void casting for unused return values
+                     Use switch statement for inflate() return values
+   1.2   9 Nov 2004  Add assertions to document zlib guarantees
+   1.3   6 Apr 2005  Remove incorrect assertion in inf()
+   1.4  11 Dec 2005  Add hack to avoid MSDOS end-of-line conversions
+                     Avoid some compiler warnings for input and output buffers
+ */
+
+We now include the header files for the required definitions. From +stdio.h we use fopen(), fread(), fwrite(), +feof(), ferror(), and fclose() for file i/o, and +fputs() for error messages. From string.h we use +strcmp() for command line argument processing. +From assert.h we use the assert() macro. +From zlib.h +we use the basic compression functions deflateInit(), +deflate(), and deflateEnd(), and the basic decompression +functions inflateInit(), inflate(), and +inflateEnd(). +

+#include <stdio.h>
+#include <string.h>
+#include <assert.h>
+#include "zlib.h"
+
+This is an ugly hack required to avoid corruption of the input and output data on +Windows/MS-DOS systems. Without this, those systems would assume that the input and output +files are text, and try to convert the end-of-line characters from one standard to +another. That would corrupt binary data, and in particular would render the compressed data unusable. +This sets the input and output to binary which suppresses the end-of-line conversions. +SET_BINARY_MODE() will be used later on stdin and stdout, at the beginning of main(). +

+#if defined(MSDOS) || defined(OS2) || defined(WIN32) || defined(__CYGWIN__)
+#  include <fcntl.h>
+#  include <io.h>
+#  define SET_BINARY_MODE(file) setmode(fileno(file), O_BINARY)
+#else
+#  define SET_BINARY_MODE(file)
+#endif
+
+CHUNK is simply the buffer size for feeding data to and pulling data +from the zlib routines. Larger buffer sizes would be more efficient, +especially for inflate(). If the memory is available, buffers sizes +on the order of 128K or 256K bytes should be used. +

+#define CHUNK 16384
+
+The def() routine compresses data from an input file to an output file. The output data +will be in the zlib format, which is different from the gzip or zip +formats. The zlib format has a very small header of only two bytes to identify it as +a zlib stream and to provide decoding information, and a four-byte trailer with a fast +check value to verify the integrity of the uncompressed data after decoding. +

+/* Compress from file source to file dest until EOF on source.
+   def() returns Z_OK on success, Z_MEM_ERROR if memory could not be
+   allocated for processing, Z_STREAM_ERROR if an invalid compression
+   level is supplied, Z_VERSION_ERROR if the version of zlib.h and the
+   version of the library linked do not match, or Z_ERRNO if there is
+   an error reading or writing the files. */
+int def(FILE *source, FILE *dest, int level)
+{
+
+Here are the local variables for def(). ret will be used for zlib +return codes. flush will keep track of the current flushing state for deflate(), +which is either no flushing, or flush to completion after the end of the input file is reached. +have is the amount of data returned from deflate(). The strm structure +is used to pass information to and from the zlib routines, and to maintain the +deflate() state. in and out are the input and output buffers for +deflate(). +

+    int ret, flush;
+    unsigned have;
+    z_stream strm;
+    unsigned char in[CHUNK];
+    unsigned char out[CHUNK];
+
+The first thing we do is to initialize the zlib state for compression using +deflateInit(). This must be done before the first use of deflate(). +The zalloc, zfree, and opaque fields in the strm +structure must be initialized before calling deflateInit(). Here they are +set to the zlib constant Z_NULL to request that zlib use +the default memory allocation routines. An application may also choose to provide +custom memory allocation routines here. deflateInit() will allocate on the +order of 256K bytes for the internal state. +(See zlib Technical Details.) +

+deflateInit() is called with a pointer to the structure to be initialized and +the compression level, which is an integer in the range of -1 to 9. Lower compression +levels result in faster execution, but less compression. Higher levels result in +greater compression, but slower execution. The zlib constant Z_DEFAULT_COMPRESSION, +equal to -1, +provides a good compromise between compression and speed and is equivalent to level 6. +Level 0 actually does no compression at all, and in fact expands the data slightly to produce +the zlib format (it is not a byte-for-byte copy of the input). +More advanced applications of zlib +may use deflateInit2() here instead. Such an application may want to reduce how +much memory will be used, at some price in compression. Or it may need to request a +gzip header and trailer instead of a zlib header and trailer, or raw +encoding with no header or trailer at all. +

+We must check the return value of deflateInit() against the zlib constant +Z_OK to make sure that it was able to +allocate memory for the internal state, and that the provided arguments were valid. +deflateInit() will also check that the version of zlib that the zlib.h +file came from matches the version of zlib actually linked with the program. This +is especially important for environments in which zlib is a shared library. +

+Note that an application can initialize multiple, independent zlib streams, which can +operate in parallel. The state information maintained in the structure allows the zlib +routines to be reentrant. +


+    /* allocate deflate state */
+    strm.zalloc = Z_NULL;
+    strm.zfree = Z_NULL;
+    strm.opaque = Z_NULL;
+    ret = deflateInit(&strm, level);
+    if (ret != Z_OK)
+        return ret;
+
+With the pleasantries out of the way, now we can get down to business. The outer do-loop +reads all of the input file and exits at the bottom of the loop once end-of-file is reached. +This loop contains the only call of deflate(). So we must make sure that all of the +input data has been processed and that all of the output data has been generated and consumed +before we fall out of the loop at the bottom. +

+    /* compress until end of file */
+    do {
+
+We start off by reading data from the input file. The number of bytes read is put directly +into avail_in, and a pointer to those bytes is put into next_in. We also +check to see if end-of-file on the input has been reached. If we are at the end of file, then flush is set to the +zlib constant Z_FINISH, which is later passed to deflate() to +indicate that this is the last chunk of input data to compress. We need to use feof() +to check for end-of-file as opposed to seeing if fewer than CHUNK bytes have been read. The +reason is that if the input file length is an exact multiple of CHUNK, we will miss +the fact that we got to the end-of-file, and not know to tell deflate() to finish +up the compressed stream. If we are not yet at the end of the input, then the zlib +constant Z_NO_FLUSH will be passed to deflate to indicate that we are still +in the middle of the uncompressed data. +

+If there is an error in reading from the input file, the process is aborted with +deflateEnd() being called to free the allocated zlib state before returning +the error. We wouldn't want a memory leak, now would we? deflateEnd() can be called +at any time after the state has been initialized. Once that's done, deflateInit() (or +deflateInit2()) would have to be called to start a new compression process. There is +no point here in checking the deflateEnd() return code. The deallocation can't fail. +


+        strm.avail_in = fread(in, 1, CHUNK, source);
+        if (ferror(source)) {
+            (void)deflateEnd(&strm);
+            return Z_ERRNO;
+        }
+        flush = feof(source) ? Z_FINISH : Z_NO_FLUSH;
+        strm.next_in = in;
+
+The inner do-loop passes our chunk of input data to deflate(), and then +keeps calling deflate() until it is done producing output. Once there is no more +new output, deflate() is guaranteed to have consumed all of the input, i.e., +avail_in will be zero. +

+        /* run deflate() on input until output buffer not full, finish
+           compression if all of source has been read in */
+        do {
+
+Output space is provided to deflate() by setting avail_out to the number +of available output bytes and next_out to a pointer to that space. +

+            strm.avail_out = CHUNK;
+            strm.next_out = out;
+
+Now we call the compression engine itself, deflate(). It takes as many of the +avail_in bytes at next_in as it can process, and writes as many as +avail_out bytes to next_out. Those counters and pointers are then +updated past the input data consumed and the output data written. It is the amount of +output space available that may limit how much input is consumed. +Hence the inner loop to make sure that +all of the input is consumed by providing more output space each time. Since avail_in +and next_in are updated by deflate(), we don't have to mess with those +between deflate() calls until it's all used up. +

+The parameters to deflate() are a pointer to the strm structure containing +the input and output information and the internal compression engine state, and a parameter +indicating whether and how to flush data to the output. Normally deflate will consume +several K bytes of input data before producing any output (except for the header), in order +to accumulate statistics on the data for optimum compression. It will then put out a burst of +compressed data, and proceed to consume more input before the next burst. Eventually, +deflate() +must be told to terminate the stream, complete the compression with provided input data, and +write out the trailer check value. deflate() will continue to compress normally as long +as the flush parameter is Z_NO_FLUSH. Once the Z_FINISH parameter is provided, +deflate() will begin to complete the compressed output stream. However depending on how +much output space is provided, deflate() may have to be called several times until it +has provided the complete compressed stream, even after it has consumed all of the input. The flush +parameter must continue to be Z_FINISH for those subsequent calls. +

+There are other values of the flush parameter that are used in more advanced applications. You can +force deflate() to produce a burst of output that encodes all of the input data provided +so far, even if it wouldn't have otherwise, for example to control data latency on a link with +compressed data. You can also ask that deflate() do that as well as erase any history up to +that point so that what follows can be decompressed independently, for example for random access +applications. Both requests will degrade compression by an amount depending on how often such +requests are made. +

+deflate() has a return value that can indicate errors, yet we do not check it here. Why +not? Well, it turns out that deflate() can do no wrong here. Let's go through +deflate()'s return values and dispense with them one by one. The possible values are +Z_OK, Z_STREAM_END, Z_STREAM_ERROR, or Z_BUF_ERROR. Z_OK +is, well, ok. Z_STREAM_END is also ok and will be returned for the last call of +deflate(). This is already guaranteed by calling deflate() with Z_FINISH +until it has no more output. Z_STREAM_ERROR is only possible if the stream is not +initialized properly, but we did initialize it properly. There is no harm in checking for +Z_STREAM_ERROR here, for example to check for the possibility that some +other part of the application inadvertently clobbered the memory containing the zlib state. +Z_BUF_ERROR will be explained further below, but +suffice it to say that this is simply an indication that deflate() could not consume +more input or produce more output. deflate() can be called again with more output space +or more available input, which it will be in this code. +


+            ret = deflate(&strm, flush);    /* no bad return value */
+            assert(ret != Z_STREAM_ERROR);  /* state not clobbered */
+
+Now we compute how much output deflate() provided on the last call, which is the +difference between how much space was provided before the call, and how much output space +is still available after the call. Then that data, if any, is written to the output file. +We can then reuse the output buffer for the next call of deflate(). Again if there +is a file i/o error, we call deflateEnd() before returning to avoid a memory leak. +

+            have = CHUNK - strm.avail_out;
+            if (fwrite(out, 1, have, dest) != have || ferror(dest)) {
+                (void)deflateEnd(&strm);
+                return Z_ERRNO;
+            }
+
+The inner do-loop is repeated until the last deflate() call fails to fill the +provided output buffer. Then we know that deflate() has done as much as it can with +the provided input, and that all of that input has been consumed. We can then fall out of this +loop and reuse the input buffer. +

+The way we tell that deflate() has no more output is by seeing that it did not fill +the output buffer, leaving avail_out greater than zero. However suppose that +deflate() has no more output, but just so happened to exactly fill the output buffer! +avail_out is zero, and we can't tell that deflate() has done all it can. +As far as we know, deflate() +has more output for us. So we call it again. But now deflate() produces no output +at all, and avail_out remains unchanged as CHUNK. That deflate() call +wasn't able to do anything, either consume input or produce output, and so it returns +Z_BUF_ERROR. (See, I told you I'd cover this later.) However this is not a problem at +all. Now we finally have the desired indication that deflate() is really done, +and so we drop out of the inner loop to provide more input to deflate(). +

+With flush set to Z_FINISH, this final set of deflate() calls will +complete the output stream. Once that is done, subsequent calls of deflate() would return +Z_STREAM_ERROR if the flush parameter is not Z_FINISH, and do no more processing +until the state is reinitialized. +

+Some applications of zlib have two loops that call deflate() +instead of the single inner loop we have here. The first loop would call +without flushing and feed all of the data to deflate(). The second loop would call +deflate() with no more +data and the Z_FINISH parameter to complete the process. As you can see from this +example, that can be avoided by simply keeping track of the current flush state. +


+        } while (strm.avail_out == 0);
+        assert(strm.avail_in == 0);     /* all input will be used */
+
+Now we check to see if we have already processed all of the input file. That information was +saved in the flush variable, so we see if that was set to Z_FINISH. If so, +then we're done and we fall out of the outer loop. We're guaranteed to get Z_STREAM_END +from the last deflate() call, since we ran it until the last chunk of input was +consumed and all of the output was generated. +

+        /* done when last data in file processed */
+    } while (flush != Z_FINISH);
+    assert(ret == Z_STREAM_END);        /* stream will be complete */
+
+The process is complete, but we still need to deallocate the state to avoid a memory leak +(or rather more like a memory hemorrhage if you didn't do this). Then +finally we can return with a happy return value. +

+    /* clean up and return */
+    (void)deflateEnd(&strm);
+    return Z_OK;
+}
+
+Now we do the same thing for decompression in the inf() routine. inf() +decompresses what is hopefully a valid zlib stream from the input file and writes the +uncompressed data to the output file. Much of the discussion above for def() +applies to inf() as well, so the discussion here will focus on the differences between +the two. +

+/* Decompress from file source to file dest until stream ends or EOF.
+   inf() returns Z_OK on success, Z_MEM_ERROR if memory could not be
+   allocated for processing, Z_DATA_ERROR if the deflate data is
+   invalid or incomplete, Z_VERSION_ERROR if the version of zlib.h and
+   the version of the library linked do not match, or Z_ERRNO if there
+   is an error reading or writing the files. */
+int inf(FILE *source, FILE *dest)
+{
+
+The local variables have the same functionality as they do for def(). The +only difference is that there is no flush variable, since inflate() +can tell from the zlib stream itself when the stream is complete. +

+    int ret;
+    unsigned have;
+    z_stream strm;
+    unsigned char in[CHUNK];
+    unsigned char out[CHUNK];
+
+The initialization of the state is the same, except that there is no compression level, +of course, and two more elements of the structure are initialized. avail_in +and next_in must be initialized before calling inflateInit(). This +is because the application has the option to provide the start of the zlib stream in +order for inflateInit() to have access to information about the compression +method to aid in memory allocation. In the current implementation of zlib +(up through versions 1.2.x), the method-dependent memory allocations are deferred to the first call of +inflate() anyway. However those fields must be initialized since later versions +of zlib that provide more compression methods may take advantage of this interface. +In any case, no decompression is performed by inflateInit(), so the +avail_out and next_out fields do not need to be initialized before calling. +

+Here avail_in is set to zero and next_in is set to Z_NULL to +indicate that no input data is being provided. +


+    /* allocate inflate state */
+    strm.zalloc = Z_NULL;
+    strm.zfree = Z_NULL;
+    strm.opaque = Z_NULL;
+    strm.avail_in = 0;
+    strm.next_in = Z_NULL;
+    ret = inflateInit(&strm);
+    if (ret != Z_OK)
+        return ret;
+
+The outer do-loop decompresses input until inflate() indicates +that it has reached the end of the compressed data and has produced all of the uncompressed +output. This is in contrast to def() which processes all of the input file. +If end-of-file is reached before the compressed data self-terminates, then the compressed +data is incomplete and an error is returned. +

+    /* decompress until deflate stream ends or end of file */
+    do {
+
+We read input data and set the strm structure accordingly. If we've reached the +end of the input file, then we leave the outer loop and report an error, since the +compressed data is incomplete. Note that we may read more data than is eventually consumed +by inflate(), if the input file continues past the zlib stream. +For applications where zlib streams are embedded in other data, this routine would +need to be modified to return the unused data, or at least indicate how much of the input +data was not used, so the application would know where to pick up after the zlib stream. +

+        strm.avail_in = fread(in, 1, CHUNK, source);
+        if (ferror(source)) {
+            (void)inflateEnd(&strm);
+            return Z_ERRNO;
+        }
+        if (strm.avail_in == 0)
+            break;
+        strm.next_in = in;
+
+The inner do-loop has the same function it did in def(), which is to +keep calling inflate() until has generated all of the output it can with the +provided input. +

+        /* run inflate() on input until output buffer not full */
+        do {
+
+Just like in def(), the same output space is provided for each call of inflate(). +

+            strm.avail_out = CHUNK;
+            strm.next_out = out;
+
+Now we run the decompression engine itself. There is no need to adjust the flush parameter, since +the zlib format is self-terminating. The main difference here is that there are +return values that we need to pay attention to. Z_DATA_ERROR +indicates that inflate() detected an error in the zlib compressed data format, +which means that either the data is not a zlib stream to begin with, or that the data was +corrupted somewhere along the way since it was compressed. The other error to be processed is +Z_MEM_ERROR, which can occur since memory allocation is deferred until inflate() +needs it, unlike deflate(), whose memory is allocated at the start by deflateInit(). +

+Advanced applications may use +deflateSetDictionary() to prime deflate() with a set of likely data to improve the +first 32K or so of compression. This is noted in the zlib header, so inflate() +requests that that dictionary be provided before it can start to decompress. Without the dictionary, +correct decompression is not possible. For this routine, we have no idea what the dictionary is, +so the Z_NEED_DICT indication is converted to a Z_DATA_ERROR. +

+inflate() can also return Z_STREAM_ERROR, which should not be possible here, +but could be checked for as noted above for def(). Z_BUF_ERROR does not need to be +checked for here, for the same reasons noted for def(). Z_STREAM_END will be +checked for later. +


+            ret = inflate(&strm, Z_NO_FLUSH);
+            assert(ret != Z_STREAM_ERROR);  /* state not clobbered */
+            switch (ret) {
+            case Z_NEED_DICT:
+                ret = Z_DATA_ERROR;     /* and fall through */
+            case Z_DATA_ERROR:
+            case Z_MEM_ERROR:
+                (void)inflateEnd(&strm);
+                return ret;
+            }
+
+The output of inflate() is handled identically to that of deflate(). +

+            have = CHUNK - strm.avail_out;
+            if (fwrite(out, 1, have, dest) != have || ferror(dest)) {
+                (void)inflateEnd(&strm);
+                return Z_ERRNO;
+            }
+
+The inner do-loop ends when inflate() has no more output as indicated +by not filling the output buffer, just as for deflate(). In this case, we cannot +assert that strm.avail_in will be zero, since the deflate stream may end before the file +does. +

+        } while (strm.avail_out == 0);
+
+The outer do-loop ends when inflate() reports that it has reached the +end of the input zlib stream, has completed the decompression and integrity +check, and has provided all of the output. This is indicated by the inflate() +return value Z_STREAM_END. The inner loop is guaranteed to leave ret +equal to Z_STREAM_END if the last chunk of the input file read contained the end +of the zlib stream. So if the return value is not Z_STREAM_END, the +loop continues to read more input. +

+        /* done when inflate() says it's done */
+    } while (ret != Z_STREAM_END);
+
+At this point, decompression successfully completed, or we broke out of the loop due to no +more data being available from the input file. If the last inflate() return value +is not Z_STREAM_END, then the zlib stream was incomplete and a data error +is returned. Otherwise, we return with a happy return value. Of course, inflateEnd() +is called first to avoid a memory leak. +

+    /* clean up and return */
+    (void)inflateEnd(&strm);
+    return ret == Z_STREAM_END ? Z_OK : Z_DATA_ERROR;
+}
+
+That ends the routines that directly use zlib. The following routines make this +a command-line program by running data through the above routines from stdin to +stdout, and handling any errors reported by def() or inf(). +

+zerr() is used to interpret the possible error codes from def() +and inf(), as detailed in their comments above, and print out an error message. +Note that these are only a subset of the possible return values from deflate() +and inflate(). +


+/* report a zlib or i/o error */
+void zerr(int ret)
+{
+    fputs("zpipe: ", stderr);
+    switch (ret) {
+    case Z_ERRNO:
+        if (ferror(stdin))
+            fputs("error reading stdin\n", stderr);
+        if (ferror(stdout))
+            fputs("error writing stdout\n", stderr);
+        break;
+    case Z_STREAM_ERROR:
+        fputs("invalid compression level\n", stderr);
+        break;
+    case Z_DATA_ERROR:
+        fputs("invalid or incomplete deflate data\n", stderr);
+        break;
+    case Z_MEM_ERROR:
+        fputs("out of memory\n", stderr);
+        break;
+    case Z_VERSION_ERROR:
+        fputs("zlib version mismatch!\n", stderr);
+    }
+}
+
+Here is the main() routine used to test def() and inf(). The +zpipe command is simply a compression pipe from stdin to stdout, if +no arguments are given, or it is a decompression pipe if zpipe -d is used. If any other +arguments are provided, no compression or decompression is performed. Instead a usage +message is displayed. Examples are zpipe < foo.txt > foo.txt.z to compress, and +zpipe -d < foo.txt.z > foo.txt to decompress. +

+/* compress or decompress from stdin to stdout */
+int main(int argc, char **argv)
+{
+    int ret;
+
+    /* avoid end-of-line conversions */
+    SET_BINARY_MODE(stdin);
+    SET_BINARY_MODE(stdout);
+
+    /* do compression if no arguments */
+    if (argc == 1) {
+        ret = def(stdin, stdout, Z_DEFAULT_COMPRESSION);
+        if (ret != Z_OK)
+            zerr(ret);
+        return ret;
+    }
+
+    /* do decompression if -d specified */
+    else if (argc == 2 && strcmp(argv[1], "-d") == 0) {
+        ret = inf(stdin, stdout);
+        if (ret != Z_OK)
+            zerr(ret);
+        return ret;
+    }
+
+    /* otherwise, report usage */
+    else {
+        fputs("zpipe usage: zpipe [-d] < source > dest\n", stderr);
+        return 1;
+    }
+}
+
+
+Copyright (c) 2004, 2005 by Mark Adler
Last modified 11 December 2005 + + diff --git a/software/scsi2sd-util/zlib-1.2.8/examples/zpipe.c b/software/scsi2sd-util/zlib-1.2.8/examples/zpipe.c new file mode 100644 index 0000000..83535d1 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/examples/zpipe.c @@ -0,0 +1,205 @@ +/* zpipe.c: example of proper use of zlib's inflate() and deflate() + Not copyrighted -- provided to the public domain + Version 1.4 11 December 2005 Mark Adler */ + +/* Version history: + 1.0 30 Oct 2004 First version + 1.1 8 Nov 2004 Add void casting for unused return values + Use switch statement for inflate() return values + 1.2 9 Nov 2004 Add assertions to document zlib guarantees + 1.3 6 Apr 2005 Remove incorrect assertion in inf() + 1.4 11 Dec 2005 Add hack to avoid MSDOS end-of-line conversions + Avoid some compiler warnings for input and output buffers + */ + +#include +#include +#include +#include "zlib.h" + +#if defined(MSDOS) || defined(OS2) || defined(WIN32) || defined(__CYGWIN__) +# include +# include +# define SET_BINARY_MODE(file) setmode(fileno(file), O_BINARY) +#else +# define SET_BINARY_MODE(file) +#endif + +#define CHUNK 16384 + +/* Compress from file source to file dest until EOF on source. + def() returns Z_OK on success, Z_MEM_ERROR if memory could not be + allocated for processing, Z_STREAM_ERROR if an invalid compression + level is supplied, Z_VERSION_ERROR if the version of zlib.h and the + version of the library linked do not match, or Z_ERRNO if there is + an error reading or writing the files. */ +int def(FILE *source, FILE *dest, int level) +{ + int ret, flush; + unsigned have; + z_stream strm; + unsigned char in[CHUNK]; + unsigned char out[CHUNK]; + + /* allocate deflate state */ + strm.zalloc = Z_NULL; + strm.zfree = Z_NULL; + strm.opaque = Z_NULL; + ret = deflateInit(&strm, level); + if (ret != Z_OK) + return ret; + + /* compress until end of file */ + do { + strm.avail_in = fread(in, 1, CHUNK, source); + if (ferror(source)) { + (void)deflateEnd(&strm); + return Z_ERRNO; + } + flush = feof(source) ? Z_FINISH : Z_NO_FLUSH; + strm.next_in = in; + + /* run deflate() on input until output buffer not full, finish + compression if all of source has been read in */ + do { + strm.avail_out = CHUNK; + strm.next_out = out; + ret = deflate(&strm, flush); /* no bad return value */ + assert(ret != Z_STREAM_ERROR); /* state not clobbered */ + have = CHUNK - strm.avail_out; + if (fwrite(out, 1, have, dest) != have || ferror(dest)) { + (void)deflateEnd(&strm); + return Z_ERRNO; + } + } while (strm.avail_out == 0); + assert(strm.avail_in == 0); /* all input will be used */ + + /* done when last data in file processed */ + } while (flush != Z_FINISH); + assert(ret == Z_STREAM_END); /* stream will be complete */ + + /* clean up and return */ + (void)deflateEnd(&strm); + return Z_OK; +} + +/* Decompress from file source to file dest until stream ends or EOF. + inf() returns Z_OK on success, Z_MEM_ERROR if memory could not be + allocated for processing, Z_DATA_ERROR if the deflate data is + invalid or incomplete, Z_VERSION_ERROR if the version of zlib.h and + the version of the library linked do not match, or Z_ERRNO if there + is an error reading or writing the files. */ +int inf(FILE *source, FILE *dest) +{ + int ret; + unsigned have; + z_stream strm; + unsigned char in[CHUNK]; + unsigned char out[CHUNK]; + + /* allocate inflate state */ + strm.zalloc = Z_NULL; + strm.zfree = Z_NULL; + strm.opaque = Z_NULL; + strm.avail_in = 0; + strm.next_in = Z_NULL; + ret = inflateInit(&strm); + if (ret != Z_OK) + return ret; + + /* decompress until deflate stream ends or end of file */ + do { + strm.avail_in = fread(in, 1, CHUNK, source); + if (ferror(source)) { + (void)inflateEnd(&strm); + return Z_ERRNO; + } + if (strm.avail_in == 0) + break; + strm.next_in = in; + + /* run inflate() on input until output buffer not full */ + do { + strm.avail_out = CHUNK; + strm.next_out = out; + ret = inflate(&strm, Z_NO_FLUSH); + assert(ret != Z_STREAM_ERROR); /* state not clobbered */ + switch (ret) { + case Z_NEED_DICT: + ret = Z_DATA_ERROR; /* and fall through */ + case Z_DATA_ERROR: + case Z_MEM_ERROR: + (void)inflateEnd(&strm); + return ret; + } + have = CHUNK - strm.avail_out; + if (fwrite(out, 1, have, dest) != have || ferror(dest)) { + (void)inflateEnd(&strm); + return Z_ERRNO; + } + } while (strm.avail_out == 0); + + /* done when inflate() says it's done */ + } while (ret != Z_STREAM_END); + + /* clean up and return */ + (void)inflateEnd(&strm); + return ret == Z_STREAM_END ? Z_OK : Z_DATA_ERROR; +} + +/* report a zlib or i/o error */ +void zerr(int ret) +{ + fputs("zpipe: ", stderr); + switch (ret) { + case Z_ERRNO: + if (ferror(stdin)) + fputs("error reading stdin\n", stderr); + if (ferror(stdout)) + fputs("error writing stdout\n", stderr); + break; + case Z_STREAM_ERROR: + fputs("invalid compression level\n", stderr); + break; + case Z_DATA_ERROR: + fputs("invalid or incomplete deflate data\n", stderr); + break; + case Z_MEM_ERROR: + fputs("out of memory\n", stderr); + break; + case Z_VERSION_ERROR: + fputs("zlib version mismatch!\n", stderr); + } +} + +/* compress or decompress from stdin to stdout */ +int main(int argc, char **argv) +{ + int ret; + + /* avoid end-of-line conversions */ + SET_BINARY_MODE(stdin); + SET_BINARY_MODE(stdout); + + /* do compression if no arguments */ + if (argc == 1) { + ret = def(stdin, stdout, Z_DEFAULT_COMPRESSION); + if (ret != Z_OK) + zerr(ret); + return ret; + } + + /* do decompression if -d specified */ + else if (argc == 2 && strcmp(argv[1], "-d") == 0) { + ret = inf(stdin, stdout); + if (ret != Z_OK) + zerr(ret); + return ret; + } + + /* otherwise, report usage */ + else { + fputs("zpipe usage: zpipe [-d] < source > dest\n", stderr); + return 1; + } +} diff --git a/software/scsi2sd-util/zlib-1.2.8/examples/zran.c b/software/scsi2sd-util/zlib-1.2.8/examples/zran.c new file mode 100644 index 0000000..278f9ad --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/examples/zran.c @@ -0,0 +1,409 @@ +/* zran.c -- example of zlib/gzip stream indexing and random access + * Copyright (C) 2005, 2012 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + Version 1.1 29 Sep 2012 Mark Adler */ + +/* Version History: + 1.0 29 May 2005 First version + 1.1 29 Sep 2012 Fix memory reallocation error + */ + +/* Illustrate the use of Z_BLOCK, inflatePrime(), and inflateSetDictionary() + for random access of a compressed file. A file containing a zlib or gzip + stream is provided on the command line. The compressed stream is decoded in + its entirety, and an index built with access points about every SPAN bytes + in the uncompressed output. The compressed file is left open, and can then + be read randomly, having to decompress on the average SPAN/2 uncompressed + bytes before getting to the desired block of data. + + An access point can be created at the start of any deflate block, by saving + the starting file offset and bit of that block, and the 32K bytes of + uncompressed data that precede that block. Also the uncompressed offset of + that block is saved to provide a referece for locating a desired starting + point in the uncompressed stream. build_index() works by decompressing the + input zlib or gzip stream a block at a time, and at the end of each block + deciding if enough uncompressed data has gone by to justify the creation of + a new access point. If so, that point is saved in a data structure that + grows as needed to accommodate the points. + + To use the index, an offset in the uncompressed data is provided, for which + the latest accees point at or preceding that offset is located in the index. + The input file is positioned to the specified location in the index, and if + necessary the first few bits of the compressed data is read from the file. + inflate is initialized with those bits and the 32K of uncompressed data, and + the decompression then proceeds until the desired offset in the file is + reached. Then the decompression continues to read the desired uncompressed + data from the file. + + Another approach would be to generate the index on demand. In that case, + requests for random access reads from the compressed data would try to use + the index, but if a read far enough past the end of the index is required, + then further index entries would be generated and added. + + There is some fair bit of overhead to starting inflation for the random + access, mainly copying the 32K byte dictionary. So if small pieces of the + file are being accessed, it would make sense to implement a cache to hold + some lookahead and avoid many calls to extract() for small lengths. + + Another way to build an index would be to use inflateCopy(). That would + not be constrained to have access points at block boundaries, but requires + more memory per access point, and also cannot be saved to file due to the + use of pointers in the state. The approach here allows for storage of the + index in a file. + */ + +#include +#include +#include +#include "zlib.h" + +#define local static + +#define SPAN 1048576L /* desired distance between access points */ +#define WINSIZE 32768U /* sliding window size */ +#define CHUNK 16384 /* file input buffer size */ + +/* access point entry */ +struct point { + off_t out; /* corresponding offset in uncompressed data */ + off_t in; /* offset in input file of first full byte */ + int bits; /* number of bits (1-7) from byte at in - 1, or 0 */ + unsigned char window[WINSIZE]; /* preceding 32K of uncompressed data */ +}; + +/* access point list */ +struct access { + int have; /* number of list entries filled in */ + int size; /* number of list entries allocated */ + struct point *list; /* allocated list */ +}; + +/* Deallocate an index built by build_index() */ +local void free_index(struct access *index) +{ + if (index != NULL) { + free(index->list); + free(index); + } +} + +/* Add an entry to the access point list. If out of memory, deallocate the + existing list and return NULL. */ +local struct access *addpoint(struct access *index, int bits, + off_t in, off_t out, unsigned left, unsigned char *window) +{ + struct point *next; + + /* if list is empty, create it (start with eight points) */ + if (index == NULL) { + index = malloc(sizeof(struct access)); + if (index == NULL) return NULL; + index->list = malloc(sizeof(struct point) << 3); + if (index->list == NULL) { + free(index); + return NULL; + } + index->size = 8; + index->have = 0; + } + + /* if list is full, make it bigger */ + else if (index->have == index->size) { + index->size <<= 1; + next = realloc(index->list, sizeof(struct point) * index->size); + if (next == NULL) { + free_index(index); + return NULL; + } + index->list = next; + } + + /* fill in entry and increment how many we have */ + next = index->list + index->have; + next->bits = bits; + next->in = in; + next->out = out; + if (left) + memcpy(next->window, window + WINSIZE - left, left); + if (left < WINSIZE) + memcpy(next->window + left, window, WINSIZE - left); + index->have++; + + /* return list, possibly reallocated */ + return index; +} + +/* Make one entire pass through the compressed stream and build an index, with + access points about every span bytes of uncompressed output -- span is + chosen to balance the speed of random access against the memory requirements + of the list, about 32K bytes per access point. Note that data after the end + of the first zlib or gzip stream in the file is ignored. build_index() + returns the number of access points on success (>= 1), Z_MEM_ERROR for out + of memory, Z_DATA_ERROR for an error in the input file, or Z_ERRNO for a + file read error. On success, *built points to the resulting index. */ +local int build_index(FILE *in, off_t span, struct access **built) +{ + int ret; + off_t totin, totout; /* our own total counters to avoid 4GB limit */ + off_t last; /* totout value of last access point */ + struct access *index; /* access points being generated */ + z_stream strm; + unsigned char input[CHUNK]; + unsigned char window[WINSIZE]; + + /* initialize inflate */ + strm.zalloc = Z_NULL; + strm.zfree = Z_NULL; + strm.opaque = Z_NULL; + strm.avail_in = 0; + strm.next_in = Z_NULL; + ret = inflateInit2(&strm, 47); /* automatic zlib or gzip decoding */ + if (ret != Z_OK) + return ret; + + /* inflate the input, maintain a sliding window, and build an index -- this + also validates the integrity of the compressed data using the check + information at the end of the gzip or zlib stream */ + totin = totout = last = 0; + index = NULL; /* will be allocated by first addpoint() */ + strm.avail_out = 0; + do { + /* get some compressed data from input file */ + strm.avail_in = fread(input, 1, CHUNK, in); + if (ferror(in)) { + ret = Z_ERRNO; + goto build_index_error; + } + if (strm.avail_in == 0) { + ret = Z_DATA_ERROR; + goto build_index_error; + } + strm.next_in = input; + + /* process all of that, or until end of stream */ + do { + /* reset sliding window if necessary */ + if (strm.avail_out == 0) { + strm.avail_out = WINSIZE; + strm.next_out = window; + } + + /* inflate until out of input, output, or at end of block -- + update the total input and output counters */ + totin += strm.avail_in; + totout += strm.avail_out; + ret = inflate(&strm, Z_BLOCK); /* return at end of block */ + totin -= strm.avail_in; + totout -= strm.avail_out; + if (ret == Z_NEED_DICT) + ret = Z_DATA_ERROR; + if (ret == Z_MEM_ERROR || ret == Z_DATA_ERROR) + goto build_index_error; + if (ret == Z_STREAM_END) + break; + + /* if at end of block, consider adding an index entry (note that if + data_type indicates an end-of-block, then all of the + uncompressed data from that block has been delivered, and none + of the compressed data after that block has been consumed, + except for up to seven bits) -- the totout == 0 provides an + entry point after the zlib or gzip header, and assures that the + index always has at least one access point; we avoid creating an + access point after the last block by checking bit 6 of data_type + */ + if ((strm.data_type & 128) && !(strm.data_type & 64) && + (totout == 0 || totout - last > span)) { + index = addpoint(index, strm.data_type & 7, totin, + totout, strm.avail_out, window); + if (index == NULL) { + ret = Z_MEM_ERROR; + goto build_index_error; + } + last = totout; + } + } while (strm.avail_in != 0); + } while (ret != Z_STREAM_END); + + /* clean up and return index (release unused entries in list) */ + (void)inflateEnd(&strm); + index->list = realloc(index->list, sizeof(struct point) * index->have); + index->size = index->have; + *built = index; + return index->size; + + /* return error */ + build_index_error: + (void)inflateEnd(&strm); + if (index != NULL) + free_index(index); + return ret; +} + +/* Use the index to read len bytes from offset into buf, return bytes read or + negative for error (Z_DATA_ERROR or Z_MEM_ERROR). If data is requested past + the end of the uncompressed data, then extract() will return a value less + than len, indicating how much as actually read into buf. This function + should not return a data error unless the file was modified since the index + was generated. extract() may also return Z_ERRNO if there is an error on + reading or seeking the input file. */ +local int extract(FILE *in, struct access *index, off_t offset, + unsigned char *buf, int len) +{ + int ret, skip; + z_stream strm; + struct point *here; + unsigned char input[CHUNK]; + unsigned char discard[WINSIZE]; + + /* proceed only if something reasonable to do */ + if (len < 0) + return 0; + + /* find where in stream to start */ + here = index->list; + ret = index->have; + while (--ret && here[1].out <= offset) + here++; + + /* initialize file and inflate state to start there */ + strm.zalloc = Z_NULL; + strm.zfree = Z_NULL; + strm.opaque = Z_NULL; + strm.avail_in = 0; + strm.next_in = Z_NULL; + ret = inflateInit2(&strm, -15); /* raw inflate */ + if (ret != Z_OK) + return ret; + ret = fseeko(in, here->in - (here->bits ? 1 : 0), SEEK_SET); + if (ret == -1) + goto extract_ret; + if (here->bits) { + ret = getc(in); + if (ret == -1) { + ret = ferror(in) ? Z_ERRNO : Z_DATA_ERROR; + goto extract_ret; + } + (void)inflatePrime(&strm, here->bits, ret >> (8 - here->bits)); + } + (void)inflateSetDictionary(&strm, here->window, WINSIZE); + + /* skip uncompressed bytes until offset reached, then satisfy request */ + offset -= here->out; + strm.avail_in = 0; + skip = 1; /* while skipping to offset */ + do { + /* define where to put uncompressed data, and how much */ + if (offset == 0 && skip) { /* at offset now */ + strm.avail_out = len; + strm.next_out = buf; + skip = 0; /* only do this once */ + } + if (offset > WINSIZE) { /* skip WINSIZE bytes */ + strm.avail_out = WINSIZE; + strm.next_out = discard; + offset -= WINSIZE; + } + else if (offset != 0) { /* last skip */ + strm.avail_out = (unsigned)offset; + strm.next_out = discard; + offset = 0; + } + + /* uncompress until avail_out filled, or end of stream */ + do { + if (strm.avail_in == 0) { + strm.avail_in = fread(input, 1, CHUNK, in); + if (ferror(in)) { + ret = Z_ERRNO; + goto extract_ret; + } + if (strm.avail_in == 0) { + ret = Z_DATA_ERROR; + goto extract_ret; + } + strm.next_in = input; + } + ret = inflate(&strm, Z_NO_FLUSH); /* normal inflate */ + if (ret == Z_NEED_DICT) + ret = Z_DATA_ERROR; + if (ret == Z_MEM_ERROR || ret == Z_DATA_ERROR) + goto extract_ret; + if (ret == Z_STREAM_END) + break; + } while (strm.avail_out != 0); + + /* if reach end of stream, then don't keep trying to get more */ + if (ret == Z_STREAM_END) + break; + + /* do until offset reached and requested data read, or stream ends */ + } while (skip); + + /* compute number of uncompressed bytes read after offset */ + ret = skip ? 0 : len - strm.avail_out; + + /* clean up and return bytes read or error */ + extract_ret: + (void)inflateEnd(&strm); + return ret; +} + +/* Demonstrate the use of build_index() and extract() by processing the file + provided on the command line, and the extracting 16K from about 2/3rds of + the way through the uncompressed output, and writing that to stdout. */ +int main(int argc, char **argv) +{ + int len; + off_t offset; + FILE *in; + struct access *index = NULL; + unsigned char buf[CHUNK]; + + /* open input file */ + if (argc != 2) { + fprintf(stderr, "usage: zran file.gz\n"); + return 1; + } + in = fopen(argv[1], "rb"); + if (in == NULL) { + fprintf(stderr, "zran: could not open %s for reading\n", argv[1]); + return 1; + } + + /* build index */ + len = build_index(in, SPAN, &index); + if (len < 0) { + fclose(in); + switch (len) { + case Z_MEM_ERROR: + fprintf(stderr, "zran: out of memory\n"); + break; + case Z_DATA_ERROR: + fprintf(stderr, "zran: compressed data error in %s\n", argv[1]); + break; + case Z_ERRNO: + fprintf(stderr, "zran: read error on %s\n", argv[1]); + break; + default: + fprintf(stderr, "zran: error %d while building index\n", len); + } + return 1; + } + fprintf(stderr, "zran: built index with %d access points\n", len); + + /* use index by reading some bytes from an arbitrary offset */ + offset = (index->list[index->have - 1].out << 1) / 3; + len = extract(in, index, offset, buf, CHUNK); + if (len < 0) + fprintf(stderr, "zran: extraction failed: %s error\n", + len == Z_MEM_ERROR ? "out of memory" : "input corrupted"); + else { + fwrite(buf, 1, len, stdout); + fprintf(stderr, "zran: extracted %d bytes at %llu\n", len, offset); + } + + /* clean up and exit */ + free_index(index); + fclose(in); + return 0; +} diff --git a/software/scsi2sd-util/zlib-1.2.8/gzclose.c b/software/scsi2sd-util/zlib-1.2.8/gzclose.c new file mode 100644 index 0000000..caeb99a --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/gzclose.c @@ -0,0 +1,25 @@ +/* gzclose.c -- zlib gzclose() function + * Copyright (C) 2004, 2010 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +#include "gzguts.h" + +/* gzclose() is in a separate file so that it is linked in only if it is used. + That way the other gzclose functions can be used instead to avoid linking in + unneeded compression or decompression routines. */ +int ZEXPORT gzclose(file) + gzFile file; +{ +#ifndef NO_GZCOMPRESS + gz_statep state; + + if (file == NULL) + return Z_STREAM_ERROR; + state = (gz_statep)file; + + return state->mode == GZ_READ ? gzclose_r(file) : gzclose_w(file); +#else + return gzclose_r(file); +#endif +} diff --git a/software/scsi2sd-util/zlib-1.2.8/gzguts.h b/software/scsi2sd-util/zlib-1.2.8/gzguts.h new file mode 100644 index 0000000..d87659d --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/gzguts.h @@ -0,0 +1,209 @@ +/* gzguts.h -- zlib internal header definitions for gz* operations + * Copyright (C) 2004, 2005, 2010, 2011, 2012, 2013 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +#ifdef _LARGEFILE64_SOURCE +# ifndef _LARGEFILE_SOURCE +# define _LARGEFILE_SOURCE 1 +# endif +# ifdef _FILE_OFFSET_BITS +# undef _FILE_OFFSET_BITS +# endif +#endif + +#ifdef HAVE_HIDDEN +# define ZLIB_INTERNAL __attribute__((visibility ("hidden"))) +#else +# define ZLIB_INTERNAL +#endif + +#include +#include "zlib.h" +#ifdef STDC +# include +# include +# include +#endif +#include + +#ifdef _WIN32 +# include +#endif + +#if defined(__TURBOC__) || defined(_MSC_VER) || defined(_WIN32) +# include +#endif + +#ifdef WINAPI_FAMILY +# define open _open +# define read _read +# define write _write +# define close _close +#endif + +#ifdef NO_DEFLATE /* for compatibility with old definition */ +# define NO_GZCOMPRESS +#endif + +#if defined(STDC99) || (defined(__TURBOC__) && __TURBOC__ >= 0x550) +# ifndef HAVE_VSNPRINTF +# define HAVE_VSNPRINTF +# endif +#endif + +#if defined(__CYGWIN__) +# ifndef HAVE_VSNPRINTF +# define HAVE_VSNPRINTF +# endif +#endif + +#if defined(MSDOS) && defined(__BORLANDC__) && (BORLANDC > 0x410) +# ifndef HAVE_VSNPRINTF +# define HAVE_VSNPRINTF +# endif +#endif + +#ifndef HAVE_VSNPRINTF +# ifdef MSDOS +/* vsnprintf may exist on some MS-DOS compilers (DJGPP?), + but for now we just assume it doesn't. */ +# define NO_vsnprintf +# endif +# ifdef __TURBOC__ +# define NO_vsnprintf +# endif +# ifdef WIN32 +/* In Win32, vsnprintf is available as the "non-ANSI" _vsnprintf. */ +# if !defined(vsnprintf) && !defined(NO_vsnprintf) +# if !defined(_MSC_VER) || ( defined(_MSC_VER) && _MSC_VER < 1500 ) +# define vsnprintf _vsnprintf +# endif +# endif +# endif +# ifdef __SASC +# define NO_vsnprintf +# endif +# ifdef VMS +# define NO_vsnprintf +# endif +# ifdef __OS400__ +# define NO_vsnprintf +# endif +# ifdef __MVS__ +# define NO_vsnprintf +# endif +#endif + +/* unlike snprintf (which is required in C99, yet still not supported by + Microsoft more than a decade later!), _snprintf does not guarantee null + termination of the result -- however this is only used in gzlib.c where + the result is assured to fit in the space provided */ +#ifdef _MSC_VER +# define snprintf _snprintf +#endif + +#ifndef local +# define local static +#endif +/* compile with -Dlocal if your debugger can't find static symbols */ + +/* gz* functions always use library allocation functions */ +#ifndef STDC + extern voidp malloc OF((uInt size)); + extern void free OF((voidpf ptr)); +#endif + +/* get errno and strerror definition */ +#if defined UNDER_CE +# include +# define zstrerror() gz_strwinerror((DWORD)GetLastError()) +#else +# ifndef NO_STRERROR +# include +# define zstrerror() strerror(errno) +# else +# define zstrerror() "stdio error (consult errno)" +# endif +#endif + +/* provide prototypes for these when building zlib without LFS */ +#if !defined(_LARGEFILE64_SOURCE) || _LFS64_LARGEFILE-0 == 0 + ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *)); + ZEXTERN z_off64_t ZEXPORT gzseek64 OF((gzFile, z_off64_t, int)); + ZEXTERN z_off64_t ZEXPORT gztell64 OF((gzFile)); + ZEXTERN z_off64_t ZEXPORT gzoffset64 OF((gzFile)); +#endif + +/* default memLevel */ +#if MAX_MEM_LEVEL >= 8 +# define DEF_MEM_LEVEL 8 +#else +# define DEF_MEM_LEVEL MAX_MEM_LEVEL +#endif + +/* default i/o buffer size -- double this for output when reading (this and + twice this must be able to fit in an unsigned type) */ +#define GZBUFSIZE 8192 + +/* gzip modes, also provide a little integrity check on the passed structure */ +#define GZ_NONE 0 +#define GZ_READ 7247 +#define GZ_WRITE 31153 +#define GZ_APPEND 1 /* mode set to GZ_WRITE after the file is opened */ + +/* values for gz_state how */ +#define LOOK 0 /* look for a gzip header */ +#define COPY 1 /* copy input directly */ +#define GZIP 2 /* decompress a gzip stream */ + +/* internal gzip file state data structure */ +typedef struct { + /* exposed contents for gzgetc() macro */ + struct gzFile_s x; /* "x" for exposed */ + /* x.have: number of bytes available at x.next */ + /* x.next: next output data to deliver or write */ + /* x.pos: current position in uncompressed data */ + /* used for both reading and writing */ + int mode; /* see gzip modes above */ + int fd; /* file descriptor */ + char *path; /* path or fd for error messages */ + unsigned size; /* buffer size, zero if not allocated yet */ + unsigned want; /* requested buffer size, default is GZBUFSIZE */ + unsigned char *in; /* input buffer */ + unsigned char *out; /* output buffer (double-sized when reading) */ + int direct; /* 0 if processing gzip, 1 if transparent */ + /* just for reading */ + int how; /* 0: get header, 1: copy, 2: decompress */ + z_off64_t start; /* where the gzip data started, for rewinding */ + int eof; /* true if end of input file reached */ + int past; /* true if read requested past end */ + /* just for writing */ + int level; /* compression level */ + int strategy; /* compression strategy */ + /* seek request */ + z_off64_t skip; /* amount to skip (already rewound if backwards) */ + int seek; /* true if seek request pending */ + /* error information */ + int err; /* error code */ + char *msg; /* error message */ + /* zlib inflate or deflate stream */ + z_stream strm; /* stream structure in-place (not a pointer) */ +} gz_state; +typedef gz_state FAR *gz_statep; + +/* shared functions */ +void ZLIB_INTERNAL gz_error OF((gz_statep, int, const char *)); +#if defined UNDER_CE +char ZLIB_INTERNAL *gz_strwinerror OF((DWORD error)); +#endif + +/* GT_OFF(x), where x is an unsigned value, is true if x > maximum z_off64_t + value -- needed when comparing unsigned to z_off64_t, which is signed + (possible z_off64_t types off_t, off64_t, and long are all signed) */ +#ifdef INT_MAX +# define GT_OFF(x) (sizeof(int) == sizeof(z_off64_t) && (x) > INT_MAX) +#else +unsigned ZLIB_INTERNAL gz_intmax OF((void)); +# define GT_OFF(x) (sizeof(int) == sizeof(z_off64_t) && (x) > gz_intmax()) +#endif diff --git a/software/scsi2sd-util/zlib-1.2.8/gzlib.c b/software/scsi2sd-util/zlib-1.2.8/gzlib.c new file mode 100644 index 0000000..fae202e --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/gzlib.c @@ -0,0 +1,634 @@ +/* gzlib.c -- zlib functions common to reading and writing gzip files + * Copyright (C) 2004, 2010, 2011, 2012, 2013 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +#include "gzguts.h" + +#if defined(_WIN32) && !defined(__BORLANDC__) +# define LSEEK _lseeki64 +#else +#if defined(_LARGEFILE64_SOURCE) && _LFS64_LARGEFILE-0 +# define LSEEK lseek64 +#else +# define LSEEK lseek +#endif +#endif + +/* Local functions */ +local void gz_reset OF((gz_statep)); +local gzFile gz_open OF((const void *, int, const char *)); + +#if defined UNDER_CE + +/* Map the Windows error number in ERROR to a locale-dependent error message + string and return a pointer to it. Typically, the values for ERROR come + from GetLastError. + + The string pointed to shall not be modified by the application, but may be + overwritten by a subsequent call to gz_strwinerror + + The gz_strwinerror function does not change the current setting of + GetLastError. */ +char ZLIB_INTERNAL *gz_strwinerror (error) + DWORD error; +{ + static char buf[1024]; + + wchar_t *msgbuf; + DWORD lasterr = GetLastError(); + DWORD chars = FormatMessage(FORMAT_MESSAGE_FROM_SYSTEM + | FORMAT_MESSAGE_ALLOCATE_BUFFER, + NULL, + error, + 0, /* Default language */ + (LPVOID)&msgbuf, + 0, + NULL); + if (chars != 0) { + /* If there is an \r\n appended, zap it. */ + if (chars >= 2 + && msgbuf[chars - 2] == '\r' && msgbuf[chars - 1] == '\n') { + chars -= 2; + msgbuf[chars] = 0; + } + + if (chars > sizeof (buf) - 1) { + chars = sizeof (buf) - 1; + msgbuf[chars] = 0; + } + + wcstombs(buf, msgbuf, chars + 1); + LocalFree(msgbuf); + } + else { + sprintf(buf, "unknown win32 error (%ld)", error); + } + + SetLastError(lasterr); + return buf; +} + +#endif /* UNDER_CE */ + +/* Reset gzip file state */ +local void gz_reset(state) + gz_statep state; +{ + state->x.have = 0; /* no output data available */ + if (state->mode == GZ_READ) { /* for reading ... */ + state->eof = 0; /* not at end of file */ + state->past = 0; /* have not read past end yet */ + state->how = LOOK; /* look for gzip header */ + } + state->seek = 0; /* no seek request pending */ + gz_error(state, Z_OK, NULL); /* clear error */ + state->x.pos = 0; /* no uncompressed data yet */ + state->strm.avail_in = 0; /* no input data yet */ +} + +/* Open a gzip file either by name or file descriptor. */ +local gzFile gz_open(path, fd, mode) + const void *path; + int fd; + const char *mode; +{ + gz_statep state; + size_t len; + int oflag; +#ifdef O_CLOEXEC + int cloexec = 0; +#endif +#ifdef O_EXCL + int exclusive = 0; +#endif + + /* check input */ + if (path == NULL) + return NULL; + + /* allocate gzFile structure to return */ + state = (gz_statep)malloc(sizeof(gz_state)); + if (state == NULL) + return NULL; + state->size = 0; /* no buffers allocated yet */ + state->want = GZBUFSIZE; /* requested buffer size */ + state->msg = NULL; /* no error message yet */ + + /* interpret mode */ + state->mode = GZ_NONE; + state->level = Z_DEFAULT_COMPRESSION; + state->strategy = Z_DEFAULT_STRATEGY; + state->direct = 0; + while (*mode) { + if (*mode >= '0' && *mode <= '9') + state->level = *mode - '0'; + else + switch (*mode) { + case 'r': + state->mode = GZ_READ; + break; +#ifndef NO_GZCOMPRESS + case 'w': + state->mode = GZ_WRITE; + break; + case 'a': + state->mode = GZ_APPEND; + break; +#endif + case '+': /* can't read and write at the same time */ + free(state); + return NULL; + case 'b': /* ignore -- will request binary anyway */ + break; +#ifdef O_CLOEXEC + case 'e': + cloexec = 1; + break; +#endif +#ifdef O_EXCL + case 'x': + exclusive = 1; + break; +#endif + case 'f': + state->strategy = Z_FILTERED; + break; + case 'h': + state->strategy = Z_HUFFMAN_ONLY; + break; + case 'R': + state->strategy = Z_RLE; + break; + case 'F': + state->strategy = Z_FIXED; + break; + case 'T': + state->direct = 1; + break; + default: /* could consider as an error, but just ignore */ + ; + } + mode++; + } + + /* must provide an "r", "w", or "a" */ + if (state->mode == GZ_NONE) { + free(state); + return NULL; + } + + /* can't force transparent read */ + if (state->mode == GZ_READ) { + if (state->direct) { + free(state); + return NULL; + } + state->direct = 1; /* for empty file */ + } + + /* save the path name for error messages */ +#ifdef _WIN32 + if (fd == -2) { + len = wcstombs(NULL, path, 0); + if (len == (size_t)-1) + len = 0; + } + else +#endif + len = strlen((const char *)path); + state->path = (char *)malloc(len + 1); + if (state->path == NULL) { + free(state); + return NULL; + } +#ifdef _WIN32 + if (fd == -2) + if (len) + wcstombs(state->path, path, len + 1); + else + *(state->path) = 0; + else +#endif +#if !defined(NO_snprintf) && !defined(NO_vsnprintf) + snprintf(state->path, len + 1, "%s", (const char *)path); +#else + strcpy(state->path, path); +#endif + + /* compute the flags for open() */ + oflag = +#ifdef O_LARGEFILE + O_LARGEFILE | +#endif +#ifdef O_BINARY + O_BINARY | +#endif +#ifdef O_CLOEXEC + (cloexec ? O_CLOEXEC : 0) | +#endif + (state->mode == GZ_READ ? + O_RDONLY : + (O_WRONLY | O_CREAT | +#ifdef O_EXCL + (exclusive ? O_EXCL : 0) | +#endif + (state->mode == GZ_WRITE ? + O_TRUNC : + O_APPEND))); + + /* open the file with the appropriate flags (or just use fd) */ + state->fd = fd > -1 ? fd : ( +#ifdef _WIN32 + fd == -2 ? _wopen(path, oflag, 0666) : +#endif + open((const char *)path, oflag, 0666)); + if (state->fd == -1) { + free(state->path); + free(state); + return NULL; + } + if (state->mode == GZ_APPEND) + state->mode = GZ_WRITE; /* simplify later checks */ + + /* save the current position for rewinding (only if reading) */ + if (state->mode == GZ_READ) { + state->start = LSEEK(state->fd, 0, SEEK_CUR); + if (state->start == -1) state->start = 0; + } + + /* initialize stream */ + gz_reset(state); + + /* return stream */ + return (gzFile)state; +} + +/* -- see zlib.h -- */ +gzFile ZEXPORT gzopen(path, mode) + const char *path; + const char *mode; +{ + return gz_open(path, -1, mode); +} + +/* -- see zlib.h -- */ +gzFile ZEXPORT gzopen64(path, mode) + const char *path; + const char *mode; +{ + return gz_open(path, -1, mode); +} + +/* -- see zlib.h -- */ +gzFile ZEXPORT gzdopen(fd, mode) + int fd; + const char *mode; +{ + char *path; /* identifier for error messages */ + gzFile gz; + + if (fd == -1 || (path = (char *)malloc(7 + 3 * sizeof(int))) == NULL) + return NULL; +#if !defined(NO_snprintf) && !defined(NO_vsnprintf) + snprintf(path, 7 + 3 * sizeof(int), "", fd); /* for debugging */ +#else + sprintf(path, "", fd); /* for debugging */ +#endif + gz = gz_open(path, fd, mode); + free(path); + return gz; +} + +/* -- see zlib.h -- */ +#ifdef _WIN32 +gzFile ZEXPORT gzopen_w(path, mode) + const wchar_t *path; + const char *mode; +{ + return gz_open(path, -2, mode); +} +#endif + +/* -- see zlib.h -- */ +int ZEXPORT gzbuffer(file, size) + gzFile file; + unsigned size; +{ + gz_statep state; + + /* get internal structure and check integrity */ + if (file == NULL) + return -1; + state = (gz_statep)file; + if (state->mode != GZ_READ && state->mode != GZ_WRITE) + return -1; + + /* make sure we haven't already allocated memory */ + if (state->size != 0) + return -1; + + /* check and set requested size */ + if (size < 2) + size = 2; /* need two bytes to check magic header */ + state->want = size; + return 0; +} + +/* -- see zlib.h -- */ +int ZEXPORT gzrewind(file) + gzFile file; +{ + gz_statep state; + + /* get internal structure */ + if (file == NULL) + return -1; + state = (gz_statep)file; + + /* check that we're reading and that there's no error */ + if (state->mode != GZ_READ || + (state->err != Z_OK && state->err != Z_BUF_ERROR)) + return -1; + + /* back up and start over */ + if (LSEEK(state->fd, state->start, SEEK_SET) == -1) + return -1; + gz_reset(state); + return 0; +} + +/* -- see zlib.h -- */ +z_off64_t ZEXPORT gzseek64(file, offset, whence) + gzFile file; + z_off64_t offset; + int whence; +{ + unsigned n; + z_off64_t ret; + gz_statep state; + + /* get internal structure and check integrity */ + if (file == NULL) + return -1; + state = (gz_statep)file; + if (state->mode != GZ_READ && state->mode != GZ_WRITE) + return -1; + + /* check that there's no error */ + if (state->err != Z_OK && state->err != Z_BUF_ERROR) + return -1; + + /* can only seek from start or relative to current position */ + if (whence != SEEK_SET && whence != SEEK_CUR) + return -1; + + /* normalize offset to a SEEK_CUR specification */ + if (whence == SEEK_SET) + offset -= state->x.pos; + else if (state->seek) + offset += state->skip; + state->seek = 0; + + /* if within raw area while reading, just go there */ + if (state->mode == GZ_READ && state->how == COPY && + state->x.pos + offset >= 0) { + ret = LSEEK(state->fd, offset - state->x.have, SEEK_CUR); + if (ret == -1) + return -1; + state->x.have = 0; + state->eof = 0; + state->past = 0; + state->seek = 0; + gz_error(state, Z_OK, NULL); + state->strm.avail_in = 0; + state->x.pos += offset; + return state->x.pos; + } + + /* calculate skip amount, rewinding if needed for back seek when reading */ + if (offset < 0) { + if (state->mode != GZ_READ) /* writing -- can't go backwards */ + return -1; + offset += state->x.pos; + if (offset < 0) /* before start of file! */ + return -1; + if (gzrewind(file) == -1) /* rewind, then skip to offset */ + return -1; + } + + /* if reading, skip what's in output buffer (one less gzgetc() check) */ + if (state->mode == GZ_READ) { + n = GT_OFF(state->x.have) || (z_off64_t)state->x.have > offset ? + (unsigned)offset : state->x.have; + state->x.have -= n; + state->x.next += n; + state->x.pos += n; + offset -= n; + } + + /* request skip (if not zero) */ + if (offset) { + state->seek = 1; + state->skip = offset; + } + return state->x.pos + offset; +} + +/* -- see zlib.h -- */ +z_off_t ZEXPORT gzseek(file, offset, whence) + gzFile file; + z_off_t offset; + int whence; +{ + z_off64_t ret; + + ret = gzseek64(file, (z_off64_t)offset, whence); + return ret == (z_off_t)ret ? (z_off_t)ret : -1; +} + +/* -- see zlib.h -- */ +z_off64_t ZEXPORT gztell64(file) + gzFile file; +{ + gz_statep state; + + /* get internal structure and check integrity */ + if (file == NULL) + return -1; + state = (gz_statep)file; + if (state->mode != GZ_READ && state->mode != GZ_WRITE) + return -1; + + /* return position */ + return state->x.pos + (state->seek ? state->skip : 0); +} + +/* -- see zlib.h -- */ +z_off_t ZEXPORT gztell(file) + gzFile file; +{ + z_off64_t ret; + + ret = gztell64(file); + return ret == (z_off_t)ret ? (z_off_t)ret : -1; +} + +/* -- see zlib.h -- */ +z_off64_t ZEXPORT gzoffset64(file) + gzFile file; +{ + z_off64_t offset; + gz_statep state; + + /* get internal structure and check integrity */ + if (file == NULL) + return -1; + state = (gz_statep)file; + if (state->mode != GZ_READ && state->mode != GZ_WRITE) + return -1; + + /* compute and return effective offset in file */ + offset = LSEEK(state->fd, 0, SEEK_CUR); + if (offset == -1) + return -1; + if (state->mode == GZ_READ) /* reading */ + offset -= state->strm.avail_in; /* don't count buffered input */ + return offset; +} + +/* -- see zlib.h -- */ +z_off_t ZEXPORT gzoffset(file) + gzFile file; +{ + z_off64_t ret; + + ret = gzoffset64(file); + return ret == (z_off_t)ret ? (z_off_t)ret : -1; +} + +/* -- see zlib.h -- */ +int ZEXPORT gzeof(file) + gzFile file; +{ + gz_statep state; + + /* get internal structure and check integrity */ + if (file == NULL) + return 0; + state = (gz_statep)file; + if (state->mode != GZ_READ && state->mode != GZ_WRITE) + return 0; + + /* return end-of-file state */ + return state->mode == GZ_READ ? state->past : 0; +} + +/* -- see zlib.h -- */ +const char * ZEXPORT gzerror(file, errnum) + gzFile file; + int *errnum; +{ + gz_statep state; + + /* get internal structure and check integrity */ + if (file == NULL) + return NULL; + state = (gz_statep)file; + if (state->mode != GZ_READ && state->mode != GZ_WRITE) + return NULL; + + /* return error information */ + if (errnum != NULL) + *errnum = state->err; + return state->err == Z_MEM_ERROR ? "out of memory" : + (state->msg == NULL ? "" : state->msg); +} + +/* -- see zlib.h -- */ +void ZEXPORT gzclearerr(file) + gzFile file; +{ + gz_statep state; + + /* get internal structure and check integrity */ + if (file == NULL) + return; + state = (gz_statep)file; + if (state->mode != GZ_READ && state->mode != GZ_WRITE) + return; + + /* clear error and end-of-file */ + if (state->mode == GZ_READ) { + state->eof = 0; + state->past = 0; + } + gz_error(state, Z_OK, NULL); +} + +/* Create an error message in allocated memory and set state->err and + state->msg accordingly. Free any previous error message already there. Do + not try to free or allocate space if the error is Z_MEM_ERROR (out of + memory). Simply save the error message as a static string. If there is an + allocation failure constructing the error message, then convert the error to + out of memory. */ +void ZLIB_INTERNAL gz_error(state, err, msg) + gz_statep state; + int err; + const char *msg; +{ + /* free previously allocated message and clear */ + if (state->msg != NULL) { + if (state->err != Z_MEM_ERROR) + free(state->msg); + state->msg = NULL; + } + + /* if fatal, set state->x.have to 0 so that the gzgetc() macro fails */ + if (err != Z_OK && err != Z_BUF_ERROR) + state->x.have = 0; + + /* set error code, and if no message, then done */ + state->err = err; + if (msg == NULL) + return; + + /* for an out of memory error, return literal string when requested */ + if (err == Z_MEM_ERROR) + return; + + /* construct error message with path */ + if ((state->msg = (char *)malloc(strlen(state->path) + strlen(msg) + 3)) == + NULL) { + state->err = Z_MEM_ERROR; + return; + } +#if !defined(NO_snprintf) && !defined(NO_vsnprintf) + snprintf(state->msg, strlen(state->path) + strlen(msg) + 3, + "%s%s%s", state->path, ": ", msg); +#else + strcpy(state->msg, state->path); + strcat(state->msg, ": "); + strcat(state->msg, msg); +#endif + return; +} + +#ifndef INT_MAX +/* portably return maximum value for an int (when limits.h presumed not + available) -- we need to do this to cover cases where 2's complement not + used, since C standard permits 1's complement and sign-bit representations, + otherwise we could just use ((unsigned)-1) >> 1 */ +unsigned ZLIB_INTERNAL gz_intmax() +{ + unsigned p, q; + + p = 1; + do { + q = p; + p <<= 1; + p++; + } while (p > q); + return q >> 1; +} +#endif diff --git a/software/scsi2sd-util/zlib-1.2.8/gzread.c b/software/scsi2sd-util/zlib-1.2.8/gzread.c new file mode 100644 index 0000000..bf4538e --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/gzread.c @@ -0,0 +1,594 @@ +/* gzread.c -- zlib functions for reading gzip files + * Copyright (C) 2004, 2005, 2010, 2011, 2012, 2013 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +#include "gzguts.h" + +/* Local functions */ +local int gz_load OF((gz_statep, unsigned char *, unsigned, unsigned *)); +local int gz_avail OF((gz_statep)); +local int gz_look OF((gz_statep)); +local int gz_decomp OF((gz_statep)); +local int gz_fetch OF((gz_statep)); +local int gz_skip OF((gz_statep, z_off64_t)); + +/* Use read() to load a buffer -- return -1 on error, otherwise 0. Read from + state->fd, and update state->eof, state->err, and state->msg as appropriate. + This function needs to loop on read(), since read() is not guaranteed to + read the number of bytes requested, depending on the type of descriptor. */ +local int gz_load(state, buf, len, have) + gz_statep state; + unsigned char *buf; + unsigned len; + unsigned *have; +{ + int ret; + + *have = 0; + do { + ret = read(state->fd, buf + *have, len - *have); + if (ret <= 0) + break; + *have += ret; + } while (*have < len); + if (ret < 0) { + gz_error(state, Z_ERRNO, zstrerror()); + return -1; + } + if (ret == 0) + state->eof = 1; + return 0; +} + +/* Load up input buffer and set eof flag if last data loaded -- return -1 on + error, 0 otherwise. Note that the eof flag is set when the end of the input + file is reached, even though there may be unused data in the buffer. Once + that data has been used, no more attempts will be made to read the file. + If strm->avail_in != 0, then the current data is moved to the beginning of + the input buffer, and then the remainder of the buffer is loaded with the + available data from the input file. */ +local int gz_avail(state) + gz_statep state; +{ + unsigned got; + z_streamp strm = &(state->strm); + + if (state->err != Z_OK && state->err != Z_BUF_ERROR) + return -1; + if (state->eof == 0) { + if (strm->avail_in) { /* copy what's there to the start */ + unsigned char *p = state->in; + unsigned const char *q = strm->next_in; + unsigned n = strm->avail_in; + do { + *p++ = *q++; + } while (--n); + } + if (gz_load(state, state->in + strm->avail_in, + state->size - strm->avail_in, &got) == -1) + return -1; + strm->avail_in += got; + strm->next_in = state->in; + } + return 0; +} + +/* Look for gzip header, set up for inflate or copy. state->x.have must be 0. + If this is the first time in, allocate required memory. state->how will be + left unchanged if there is no more input data available, will be set to COPY + if there is no gzip header and direct copying will be performed, or it will + be set to GZIP for decompression. If direct copying, then leftover input + data from the input buffer will be copied to the output buffer. In that + case, all further file reads will be directly to either the output buffer or + a user buffer. If decompressing, the inflate state will be initialized. + gz_look() will return 0 on success or -1 on failure. */ +local int gz_look(state) + gz_statep state; +{ + z_streamp strm = &(state->strm); + + /* allocate read buffers and inflate memory */ + if (state->size == 0) { + /* allocate buffers */ + state->in = (unsigned char *)malloc(state->want); + state->out = (unsigned char *)malloc(state->want << 1); + if (state->in == NULL || state->out == NULL) { + if (state->out != NULL) + free(state->out); + if (state->in != NULL) + free(state->in); + gz_error(state, Z_MEM_ERROR, "out of memory"); + return -1; + } + state->size = state->want; + + /* allocate inflate memory */ + state->strm.zalloc = Z_NULL; + state->strm.zfree = Z_NULL; + state->strm.opaque = Z_NULL; + state->strm.avail_in = 0; + state->strm.next_in = Z_NULL; + if (inflateInit2(&(state->strm), 15 + 16) != Z_OK) { /* gunzip */ + free(state->out); + free(state->in); + state->size = 0; + gz_error(state, Z_MEM_ERROR, "out of memory"); + return -1; + } + } + + /* get at least the magic bytes in the input buffer */ + if (strm->avail_in < 2) { + if (gz_avail(state) == -1) + return -1; + if (strm->avail_in == 0) + return 0; + } + + /* look for gzip magic bytes -- if there, do gzip decoding (note: there is + a logical dilemma here when considering the case of a partially written + gzip file, to wit, if a single 31 byte is written, then we cannot tell + whether this is a single-byte file, or just a partially written gzip + file -- for here we assume that if a gzip file is being written, then + the header will be written in a single operation, so that reading a + single byte is sufficient indication that it is not a gzip file) */ + if (strm->avail_in > 1 && + strm->next_in[0] == 31 && strm->next_in[1] == 139) { + inflateReset(strm); + state->how = GZIP; + state->direct = 0; + return 0; + } + + /* no gzip header -- if we were decoding gzip before, then this is trailing + garbage. Ignore the trailing garbage and finish. */ + if (state->direct == 0) { + strm->avail_in = 0; + state->eof = 1; + state->x.have = 0; + return 0; + } + + /* doing raw i/o, copy any leftover input to output -- this assumes that + the output buffer is larger than the input buffer, which also assures + space for gzungetc() */ + state->x.next = state->out; + if (strm->avail_in) { + memcpy(state->x.next, strm->next_in, strm->avail_in); + state->x.have = strm->avail_in; + strm->avail_in = 0; + } + state->how = COPY; + state->direct = 1; + return 0; +} + +/* Decompress from input to the provided next_out and avail_out in the state. + On return, state->x.have and state->x.next point to the just decompressed + data. If the gzip stream completes, state->how is reset to LOOK to look for + the next gzip stream or raw data, once state->x.have is depleted. Returns 0 + on success, -1 on failure. */ +local int gz_decomp(state) + gz_statep state; +{ + int ret = Z_OK; + unsigned had; + z_streamp strm = &(state->strm); + + /* fill output buffer up to end of deflate stream */ + had = strm->avail_out; + do { + /* get more input for inflate() */ + if (strm->avail_in == 0 && gz_avail(state) == -1) + return -1; + if (strm->avail_in == 0) { + gz_error(state, Z_BUF_ERROR, "unexpected end of file"); + break; + } + + /* decompress and handle errors */ + ret = inflate(strm, Z_NO_FLUSH); + if (ret == Z_STREAM_ERROR || ret == Z_NEED_DICT) { + gz_error(state, Z_STREAM_ERROR, + "internal error: inflate stream corrupt"); + return -1; + } + if (ret == Z_MEM_ERROR) { + gz_error(state, Z_MEM_ERROR, "out of memory"); + return -1; + } + if (ret == Z_DATA_ERROR) { /* deflate stream invalid */ + gz_error(state, Z_DATA_ERROR, + strm->msg == NULL ? "compressed data error" : strm->msg); + return -1; + } + } while (strm->avail_out && ret != Z_STREAM_END); + + /* update available output */ + state->x.have = had - strm->avail_out; + state->x.next = strm->next_out - state->x.have; + + /* if the gzip stream completed successfully, look for another */ + if (ret == Z_STREAM_END) + state->how = LOOK; + + /* good decompression */ + return 0; +} + +/* Fetch data and put it in the output buffer. Assumes state->x.have is 0. + Data is either copied from the input file or decompressed from the input + file depending on state->how. If state->how is LOOK, then a gzip header is + looked for to determine whether to copy or decompress. Returns -1 on error, + otherwise 0. gz_fetch() will leave state->how as COPY or GZIP unless the + end of the input file has been reached and all data has been processed. */ +local int gz_fetch(state) + gz_statep state; +{ + z_streamp strm = &(state->strm); + + do { + switch(state->how) { + case LOOK: /* -> LOOK, COPY (only if never GZIP), or GZIP */ + if (gz_look(state) == -1) + return -1; + if (state->how == LOOK) + return 0; + break; + case COPY: /* -> COPY */ + if (gz_load(state, state->out, state->size << 1, &(state->x.have)) + == -1) + return -1; + state->x.next = state->out; + return 0; + case GZIP: /* -> GZIP or LOOK (if end of gzip stream) */ + strm->avail_out = state->size << 1; + strm->next_out = state->out; + if (gz_decomp(state) == -1) + return -1; + } + } while (state->x.have == 0 && (!state->eof || strm->avail_in)); + return 0; +} + +/* Skip len uncompressed bytes of output. Return -1 on error, 0 on success. */ +local int gz_skip(state, len) + gz_statep state; + z_off64_t len; +{ + unsigned n; + + /* skip over len bytes or reach end-of-file, whichever comes first */ + while (len) + /* skip over whatever is in output buffer */ + if (state->x.have) { + n = GT_OFF(state->x.have) || (z_off64_t)state->x.have > len ? + (unsigned)len : state->x.have; + state->x.have -= n; + state->x.next += n; + state->x.pos += n; + len -= n; + } + + /* output buffer empty -- return if we're at the end of the input */ + else if (state->eof && state->strm.avail_in == 0) + break; + + /* need more data to skip -- load up output buffer */ + else { + /* get more output, looking for header if required */ + if (gz_fetch(state) == -1) + return -1; + } + return 0; +} + +/* -- see zlib.h -- */ +int ZEXPORT gzread(file, buf, len) + gzFile file; + voidp buf; + unsigned len; +{ + unsigned got, n; + gz_statep state; + z_streamp strm; + + /* get internal structure */ + if (file == NULL) + return -1; + state = (gz_statep)file; + strm = &(state->strm); + + /* check that we're reading and that there's no (serious) error */ + if (state->mode != GZ_READ || + (state->err != Z_OK && state->err != Z_BUF_ERROR)) + return -1; + + /* since an int is returned, make sure len fits in one, otherwise return + with an error (this avoids the flaw in the interface) */ + if ((int)len < 0) { + gz_error(state, Z_DATA_ERROR, "requested length does not fit in int"); + return -1; + } + + /* if len is zero, avoid unnecessary operations */ + if (len == 0) + return 0; + + /* process a skip request */ + if (state->seek) { + state->seek = 0; + if (gz_skip(state, state->skip) == -1) + return -1; + } + + /* get len bytes to buf, or less than len if at the end */ + got = 0; + do { + /* first just try copying data from the output buffer */ + if (state->x.have) { + n = state->x.have > len ? len : state->x.have; + memcpy(buf, state->x.next, n); + state->x.next += n; + state->x.have -= n; + } + + /* output buffer empty -- return if we're at the end of the input */ + else if (state->eof && strm->avail_in == 0) { + state->past = 1; /* tried to read past end */ + break; + } + + /* need output data -- for small len or new stream load up our output + buffer */ + else if (state->how == LOOK || len < (state->size << 1)) { + /* get more output, looking for header if required */ + if (gz_fetch(state) == -1) + return -1; + continue; /* no progress yet -- go back to copy above */ + /* the copy above assures that we will leave with space in the + output buffer, allowing at least one gzungetc() to succeed */ + } + + /* large len -- read directly into user buffer */ + else if (state->how == COPY) { /* read directly */ + if (gz_load(state, (unsigned char *)buf, len, &n) == -1) + return -1; + } + + /* large len -- decompress directly into user buffer */ + else { /* state->how == GZIP */ + strm->avail_out = len; + strm->next_out = (unsigned char *)buf; + if (gz_decomp(state) == -1) + return -1; + n = state->x.have; + state->x.have = 0; + } + + /* update progress */ + len -= n; + buf = (char *)buf + n; + got += n; + state->x.pos += n; + } while (len); + + /* return number of bytes read into user buffer (will fit in int) */ + return (int)got; +} + +/* -- see zlib.h -- */ +#ifdef Z_PREFIX_SET +# undef z_gzgetc +#else +# undef gzgetc +#endif +int ZEXPORT gzgetc(file) + gzFile file; +{ + int ret; + unsigned char buf[1]; + gz_statep state; + + /* get internal structure */ + if (file == NULL) + return -1; + state = (gz_statep)file; + + /* check that we're reading and that there's no (serious) error */ + if (state->mode != GZ_READ || + (state->err != Z_OK && state->err != Z_BUF_ERROR)) + return -1; + + /* try output buffer (no need to check for skip request) */ + if (state->x.have) { + state->x.have--; + state->x.pos++; + return *(state->x.next)++; + } + + /* nothing there -- try gzread() */ + ret = gzread(file, buf, 1); + return ret < 1 ? -1 : buf[0]; +} + +int ZEXPORT gzgetc_(file) +gzFile file; +{ + return gzgetc(file); +} + +/* -- see zlib.h -- */ +int ZEXPORT gzungetc(c, file) + int c; + gzFile file; +{ + gz_statep state; + + /* get internal structure */ + if (file == NULL) + return -1; + state = (gz_statep)file; + + /* check that we're reading and that there's no (serious) error */ + if (state->mode != GZ_READ || + (state->err != Z_OK && state->err != Z_BUF_ERROR)) + return -1; + + /* process a skip request */ + if (state->seek) { + state->seek = 0; + if (gz_skip(state, state->skip) == -1) + return -1; + } + + /* can't push EOF */ + if (c < 0) + return -1; + + /* if output buffer empty, put byte at end (allows more pushing) */ + if (state->x.have == 0) { + state->x.have = 1; + state->x.next = state->out + (state->size << 1) - 1; + state->x.next[0] = c; + state->x.pos--; + state->past = 0; + return c; + } + + /* if no room, give up (must have already done a gzungetc()) */ + if (state->x.have == (state->size << 1)) { + gz_error(state, Z_DATA_ERROR, "out of room to push characters"); + return -1; + } + + /* slide output data if needed and insert byte before existing data */ + if (state->x.next == state->out) { + unsigned char *src = state->out + state->x.have; + unsigned char *dest = state->out + (state->size << 1); + while (src > state->out) + *--dest = *--src; + state->x.next = dest; + } + state->x.have++; + state->x.next--; + state->x.next[0] = c; + state->x.pos--; + state->past = 0; + return c; +} + +/* -- see zlib.h -- */ +char * ZEXPORT gzgets(file, buf, len) + gzFile file; + char *buf; + int len; +{ + unsigned left, n; + char *str; + unsigned char *eol; + gz_statep state; + + /* check parameters and get internal structure */ + if (file == NULL || buf == NULL || len < 1) + return NULL; + state = (gz_statep)file; + + /* check that we're reading and that there's no (serious) error */ + if (state->mode != GZ_READ || + (state->err != Z_OK && state->err != Z_BUF_ERROR)) + return NULL; + + /* process a skip request */ + if (state->seek) { + state->seek = 0; + if (gz_skip(state, state->skip) == -1) + return NULL; + } + + /* copy output bytes up to new line or len - 1, whichever comes first -- + append a terminating zero to the string (we don't check for a zero in + the contents, let the user worry about that) */ + str = buf; + left = (unsigned)len - 1; + if (left) do { + /* assure that something is in the output buffer */ + if (state->x.have == 0 && gz_fetch(state) == -1) + return NULL; /* error */ + if (state->x.have == 0) { /* end of file */ + state->past = 1; /* read past end */ + break; /* return what we have */ + } + + /* look for end-of-line in current output buffer */ + n = state->x.have > left ? left : state->x.have; + eol = (unsigned char *)memchr(state->x.next, '\n', n); + if (eol != NULL) + n = (unsigned)(eol - state->x.next) + 1; + + /* copy through end-of-line, or remainder if not found */ + memcpy(buf, state->x.next, n); + state->x.have -= n; + state->x.next += n; + state->x.pos += n; + left -= n; + buf += n; + } while (left && eol == NULL); + + /* return terminated string, or if nothing, end of file */ + if (buf == str) + return NULL; + buf[0] = 0; + return str; +} + +/* -- see zlib.h -- */ +int ZEXPORT gzdirect(file) + gzFile file; +{ + gz_statep state; + + /* get internal structure */ + if (file == NULL) + return 0; + state = (gz_statep)file; + + /* if the state is not known, but we can find out, then do so (this is + mainly for right after a gzopen() or gzdopen()) */ + if (state->mode == GZ_READ && state->how == LOOK && state->x.have == 0) + (void)gz_look(state); + + /* return 1 if transparent, 0 if processing a gzip stream */ + return state->direct; +} + +/* -- see zlib.h -- */ +int ZEXPORT gzclose_r(file) + gzFile file; +{ + int ret, err; + gz_statep state; + + /* get internal structure */ + if (file == NULL) + return Z_STREAM_ERROR; + state = (gz_statep)file; + + /* check that we're reading */ + if (state->mode != GZ_READ) + return Z_STREAM_ERROR; + + /* free memory and close file */ + if (state->size) { + inflateEnd(&(state->strm)); + free(state->out); + free(state->in); + } + err = state->err == Z_BUF_ERROR ? Z_BUF_ERROR : Z_OK; + gz_error(state, Z_OK, NULL); + free(state->path); + ret = close(state->fd); + free(state); + return ret ? Z_ERRNO : err; +} diff --git a/software/scsi2sd-util/zlib-1.2.8/gzwrite.c b/software/scsi2sd-util/zlib-1.2.8/gzwrite.c new file mode 100644 index 0000000..aa767fb --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/gzwrite.c @@ -0,0 +1,577 @@ +/* gzwrite.c -- zlib functions for writing gzip files + * Copyright (C) 2004, 2005, 2010, 2011, 2012, 2013 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +#include "gzguts.h" + +/* Local functions */ +local int gz_init OF((gz_statep)); +local int gz_comp OF((gz_statep, int)); +local int gz_zero OF((gz_statep, z_off64_t)); + +/* Initialize state for writing a gzip file. Mark initialization by setting + state->size to non-zero. Return -1 on failure or 0 on success. */ +local int gz_init(state) + gz_statep state; +{ + int ret; + z_streamp strm = &(state->strm); + + /* allocate input buffer */ + state->in = (unsigned char *)malloc(state->want); + if (state->in == NULL) { + gz_error(state, Z_MEM_ERROR, "out of memory"); + return -1; + } + + /* only need output buffer and deflate state if compressing */ + if (!state->direct) { + /* allocate output buffer */ + state->out = (unsigned char *)malloc(state->want); + if (state->out == NULL) { + free(state->in); + gz_error(state, Z_MEM_ERROR, "out of memory"); + return -1; + } + + /* allocate deflate memory, set up for gzip compression */ + strm->zalloc = Z_NULL; + strm->zfree = Z_NULL; + strm->opaque = Z_NULL; + ret = deflateInit2(strm, state->level, Z_DEFLATED, + MAX_WBITS + 16, DEF_MEM_LEVEL, state->strategy); + if (ret != Z_OK) { + free(state->out); + free(state->in); + gz_error(state, Z_MEM_ERROR, "out of memory"); + return -1; + } + } + + /* mark state as initialized */ + state->size = state->want; + + /* initialize write buffer if compressing */ + if (!state->direct) { + strm->avail_out = state->size; + strm->next_out = state->out; + state->x.next = strm->next_out; + } + return 0; +} + +/* Compress whatever is at avail_in and next_in and write to the output file. + Return -1 if there is an error writing to the output file, otherwise 0. + flush is assumed to be a valid deflate() flush value. If flush is Z_FINISH, + then the deflate() state is reset to start a new gzip stream. If gz->direct + is true, then simply write to the output file without compressing, and + ignore flush. */ +local int gz_comp(state, flush) + gz_statep state; + int flush; +{ + int ret, got; + unsigned have; + z_streamp strm = &(state->strm); + + /* allocate memory if this is the first time through */ + if (state->size == 0 && gz_init(state) == -1) + return -1; + + /* write directly if requested */ + if (state->direct) { + got = write(state->fd, strm->next_in, strm->avail_in); + if (got < 0 || (unsigned)got != strm->avail_in) { + gz_error(state, Z_ERRNO, zstrerror()); + return -1; + } + strm->avail_in = 0; + return 0; + } + + /* run deflate() on provided input until it produces no more output */ + ret = Z_OK; + do { + /* write out current buffer contents if full, or if flushing, but if + doing Z_FINISH then don't write until we get to Z_STREAM_END */ + if (strm->avail_out == 0 || (flush != Z_NO_FLUSH && + (flush != Z_FINISH || ret == Z_STREAM_END))) { + have = (unsigned)(strm->next_out - state->x.next); + if (have && ((got = write(state->fd, state->x.next, have)) < 0 || + (unsigned)got != have)) { + gz_error(state, Z_ERRNO, zstrerror()); + return -1; + } + if (strm->avail_out == 0) { + strm->avail_out = state->size; + strm->next_out = state->out; + } + state->x.next = strm->next_out; + } + + /* compress */ + have = strm->avail_out; + ret = deflate(strm, flush); + if (ret == Z_STREAM_ERROR) { + gz_error(state, Z_STREAM_ERROR, + "internal error: deflate stream corrupt"); + return -1; + } + have -= strm->avail_out; + } while (have); + + /* if that completed a deflate stream, allow another to start */ + if (flush == Z_FINISH) + deflateReset(strm); + + /* all done, no errors */ + return 0; +} + +/* Compress len zeros to output. Return -1 on error, 0 on success. */ +local int gz_zero(state, len) + gz_statep state; + z_off64_t len; +{ + int first; + unsigned n; + z_streamp strm = &(state->strm); + + /* consume whatever's left in the input buffer */ + if (strm->avail_in && gz_comp(state, Z_NO_FLUSH) == -1) + return -1; + + /* compress len zeros (len guaranteed > 0) */ + first = 1; + while (len) { + n = GT_OFF(state->size) || (z_off64_t)state->size > len ? + (unsigned)len : state->size; + if (first) { + memset(state->in, 0, n); + first = 0; + } + strm->avail_in = n; + strm->next_in = state->in; + state->x.pos += n; + if (gz_comp(state, Z_NO_FLUSH) == -1) + return -1; + len -= n; + } + return 0; +} + +/* -- see zlib.h -- */ +int ZEXPORT gzwrite(file, buf, len) + gzFile file; + voidpc buf; + unsigned len; +{ + unsigned put = len; + gz_statep state; + z_streamp strm; + + /* get internal structure */ + if (file == NULL) + return 0; + state = (gz_statep)file; + strm = &(state->strm); + + /* check that we're writing and that there's no error */ + if (state->mode != GZ_WRITE || state->err != Z_OK) + return 0; + + /* since an int is returned, make sure len fits in one, otherwise return + with an error (this avoids the flaw in the interface) */ + if ((int)len < 0) { + gz_error(state, Z_DATA_ERROR, "requested length does not fit in int"); + return 0; + } + + /* if len is zero, avoid unnecessary operations */ + if (len == 0) + return 0; + + /* allocate memory if this is the first time through */ + if (state->size == 0 && gz_init(state) == -1) + return 0; + + /* check for seek request */ + if (state->seek) { + state->seek = 0; + if (gz_zero(state, state->skip) == -1) + return 0; + } + + /* for small len, copy to input buffer, otherwise compress directly */ + if (len < state->size) { + /* copy to input buffer, compress when full */ + do { + unsigned have, copy; + + if (strm->avail_in == 0) + strm->next_in = state->in; + have = (unsigned)((strm->next_in + strm->avail_in) - state->in); + copy = state->size - have; + if (copy > len) + copy = len; + memcpy(state->in + have, buf, copy); + strm->avail_in += copy; + state->x.pos += copy; + buf = (const char *)buf + copy; + len -= copy; + if (len && gz_comp(state, Z_NO_FLUSH) == -1) + return 0; + } while (len); + } + else { + /* consume whatever's left in the input buffer */ + if (strm->avail_in && gz_comp(state, Z_NO_FLUSH) == -1) + return 0; + + /* directly compress user buffer to file */ + strm->avail_in = len; + strm->next_in = (z_const Bytef *)buf; + state->x.pos += len; + if (gz_comp(state, Z_NO_FLUSH) == -1) + return 0; + } + + /* input was all buffered or compressed (put will fit in int) */ + return (int)put; +} + +/* -- see zlib.h -- */ +int ZEXPORT gzputc(file, c) + gzFile file; + int c; +{ + unsigned have; + unsigned char buf[1]; + gz_statep state; + z_streamp strm; + + /* get internal structure */ + if (file == NULL) + return -1; + state = (gz_statep)file; + strm = &(state->strm); + + /* check that we're writing and that there's no error */ + if (state->mode != GZ_WRITE || state->err != Z_OK) + return -1; + + /* check for seek request */ + if (state->seek) { + state->seek = 0; + if (gz_zero(state, state->skip) == -1) + return -1; + } + + /* try writing to input buffer for speed (state->size == 0 if buffer not + initialized) */ + if (state->size) { + if (strm->avail_in == 0) + strm->next_in = state->in; + have = (unsigned)((strm->next_in + strm->avail_in) - state->in); + if (have < state->size) { + state->in[have] = c; + strm->avail_in++; + state->x.pos++; + return c & 0xff; + } + } + + /* no room in buffer or not initialized, use gz_write() */ + buf[0] = c; + if (gzwrite(file, buf, 1) != 1) + return -1; + return c & 0xff; +} + +/* -- see zlib.h -- */ +int ZEXPORT gzputs(file, str) + gzFile file; + const char *str; +{ + int ret; + unsigned len; + + /* write string */ + len = (unsigned)strlen(str); + ret = gzwrite(file, str, len); + return ret == 0 && len != 0 ? -1 : ret; +} + +#if defined(STDC) || defined(Z_HAVE_STDARG_H) +#include + +/* -- see zlib.h -- */ +int ZEXPORTVA gzvprintf(gzFile file, const char *format, va_list va) +{ + int size, len; + gz_statep state; + z_streamp strm; + + /* get internal structure */ + if (file == NULL) + return -1; + state = (gz_statep)file; + strm = &(state->strm); + + /* check that we're writing and that there's no error */ + if (state->mode != GZ_WRITE || state->err != Z_OK) + return 0; + + /* make sure we have some buffer space */ + if (state->size == 0 && gz_init(state) == -1) + return 0; + + /* check for seek request */ + if (state->seek) { + state->seek = 0; + if (gz_zero(state, state->skip) == -1) + return 0; + } + + /* consume whatever's left in the input buffer */ + if (strm->avail_in && gz_comp(state, Z_NO_FLUSH) == -1) + return 0; + + /* do the printf() into the input buffer, put length in len */ + size = (int)(state->size); + state->in[size - 1] = 0; +#ifdef NO_vsnprintf +# ifdef HAS_vsprintf_void + (void)vsprintf((char *)(state->in), format, va); + for (len = 0; len < size; len++) + if (state->in[len] == 0) break; +# else + len = vsprintf((char *)(state->in), format, va); +# endif +#else +# ifdef HAS_vsnprintf_void + (void)vsnprintf((char *)(state->in), size, format, va); + len = strlen((char *)(state->in)); +# else + len = vsnprintf((char *)(state->in), size, format, va); +# endif +#endif + + /* check that printf() results fit in buffer */ + if (len <= 0 || len >= (int)size || state->in[size - 1] != 0) + return 0; + + /* update buffer and position, defer compression until needed */ + strm->avail_in = (unsigned)len; + strm->next_in = state->in; + state->x.pos += len; + return len; +} + +int ZEXPORTVA gzprintf(gzFile file, const char *format, ...) +{ + va_list va; + int ret; + + va_start(va, format); + ret = gzvprintf(file, format, va); + va_end(va); + return ret; +} + +#else /* !STDC && !Z_HAVE_STDARG_H */ + +/* -- see zlib.h -- */ +int ZEXPORTVA gzprintf (file, format, a1, a2, a3, a4, a5, a6, a7, a8, a9, a10, + a11, a12, a13, a14, a15, a16, a17, a18, a19, a20) + gzFile file; + const char *format; + int a1, a2, a3, a4, a5, a6, a7, a8, a9, a10, + a11, a12, a13, a14, a15, a16, a17, a18, a19, a20; +{ + int size, len; + gz_statep state; + z_streamp strm; + + /* get internal structure */ + if (file == NULL) + return -1; + state = (gz_statep)file; + strm = &(state->strm); + + /* check that can really pass pointer in ints */ + if (sizeof(int) != sizeof(void *)) + return 0; + + /* check that we're writing and that there's no error */ + if (state->mode != GZ_WRITE || state->err != Z_OK) + return 0; + + /* make sure we have some buffer space */ + if (state->size == 0 && gz_init(state) == -1) + return 0; + + /* check for seek request */ + if (state->seek) { + state->seek = 0; + if (gz_zero(state, state->skip) == -1) + return 0; + } + + /* consume whatever's left in the input buffer */ + if (strm->avail_in && gz_comp(state, Z_NO_FLUSH) == -1) + return 0; + + /* do the printf() into the input buffer, put length in len */ + size = (int)(state->size); + state->in[size - 1] = 0; +#ifdef NO_snprintf +# ifdef HAS_sprintf_void + sprintf((char *)(state->in), format, a1, a2, a3, a4, a5, a6, a7, a8, + a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20); + for (len = 0; len < size; len++) + if (state->in[len] == 0) break; +# else + len = sprintf((char *)(state->in), format, a1, a2, a3, a4, a5, a6, a7, a8, + a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20); +# endif +#else +# ifdef HAS_snprintf_void + snprintf((char *)(state->in), size, format, a1, a2, a3, a4, a5, a6, a7, a8, + a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20); + len = strlen((char *)(state->in)); +# else + len = snprintf((char *)(state->in), size, format, a1, a2, a3, a4, a5, a6, + a7, a8, a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, + a19, a20); +# endif +#endif + + /* check that printf() results fit in buffer */ + if (len <= 0 || len >= (int)size || state->in[size - 1] != 0) + return 0; + + /* update buffer and position, defer compression until needed */ + strm->avail_in = (unsigned)len; + strm->next_in = state->in; + state->x.pos += len; + return len; +} + +#endif + +/* -- see zlib.h -- */ +int ZEXPORT gzflush(file, flush) + gzFile file; + int flush; +{ + gz_statep state; + + /* get internal structure */ + if (file == NULL) + return -1; + state = (gz_statep)file; + + /* check that we're writing and that there's no error */ + if (state->mode != GZ_WRITE || state->err != Z_OK) + return Z_STREAM_ERROR; + + /* check flush parameter */ + if (flush < 0 || flush > Z_FINISH) + return Z_STREAM_ERROR; + + /* check for seek request */ + if (state->seek) { + state->seek = 0; + if (gz_zero(state, state->skip) == -1) + return -1; + } + + /* compress remaining data with requested flush */ + gz_comp(state, flush); + return state->err; +} + +/* -- see zlib.h -- */ +int ZEXPORT gzsetparams(file, level, strategy) + gzFile file; + int level; + int strategy; +{ + gz_statep state; + z_streamp strm; + + /* get internal structure */ + if (file == NULL) + return Z_STREAM_ERROR; + state = (gz_statep)file; + strm = &(state->strm); + + /* check that we're writing and that there's no error */ + if (state->mode != GZ_WRITE || state->err != Z_OK) + return Z_STREAM_ERROR; + + /* if no change is requested, then do nothing */ + if (level == state->level && strategy == state->strategy) + return Z_OK; + + /* check for seek request */ + if (state->seek) { + state->seek = 0; + if (gz_zero(state, state->skip) == -1) + return -1; + } + + /* change compression parameters for subsequent input */ + if (state->size) { + /* flush previous input with previous parameters before changing */ + if (strm->avail_in && gz_comp(state, Z_PARTIAL_FLUSH) == -1) + return state->err; + deflateParams(strm, level, strategy); + } + state->level = level; + state->strategy = strategy; + return Z_OK; +} + +/* -- see zlib.h -- */ +int ZEXPORT gzclose_w(file) + gzFile file; +{ + int ret = Z_OK; + gz_statep state; + + /* get internal structure */ + if (file == NULL) + return Z_STREAM_ERROR; + state = (gz_statep)file; + + /* check that we're writing */ + if (state->mode != GZ_WRITE) + return Z_STREAM_ERROR; + + /* check for seek request */ + if (state->seek) { + state->seek = 0; + if (gz_zero(state, state->skip) == -1) + ret = state->err; + } + + /* flush, free memory, and close file */ + if (gz_comp(state, Z_FINISH) == -1) + ret = state->err; + if (state->size) { + if (!state->direct) { + (void)deflateEnd(&(state->strm)); + free(state->out); + } + free(state->in); + } + gz_error(state, Z_OK, NULL); + free(state->path); + if (close(state->fd) == -1) + ret = Z_ERRNO; + free(state); + return ret; +} diff --git a/software/scsi2sd-util/zlib-1.2.8/infback.c b/software/scsi2sd-util/zlib-1.2.8/infback.c new file mode 100644 index 0000000..f3833c2 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/infback.c @@ -0,0 +1,640 @@ +/* infback.c -- inflate using a call-back interface + * Copyright (C) 1995-2011 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* + This code is largely copied from inflate.c. Normally either infback.o or + inflate.o would be linked into an application--not both. The interface + with inffast.c is retained so that optimized assembler-coded versions of + inflate_fast() can be used with either inflate.c or infback.c. + */ + +#include "zutil.h" +#include "inftrees.h" +#include "inflate.h" +#include "inffast.h" + +/* function prototypes */ +local void fixedtables OF((struct inflate_state FAR *state)); + +/* + strm provides memory allocation functions in zalloc and zfree, or + Z_NULL to use the library memory allocation functions. + + windowBits is in the range 8..15, and window is a user-supplied + window and output buffer that is 2**windowBits bytes. + */ +int ZEXPORT inflateBackInit_(strm, windowBits, window, version, stream_size) +z_streamp strm; +int windowBits; +unsigned char FAR *window; +const char *version; +int stream_size; +{ + struct inflate_state FAR *state; + + if (version == Z_NULL || version[0] != ZLIB_VERSION[0] || + stream_size != (int)(sizeof(z_stream))) + return Z_VERSION_ERROR; + if (strm == Z_NULL || window == Z_NULL || + windowBits < 8 || windowBits > 15) + return Z_STREAM_ERROR; + strm->msg = Z_NULL; /* in case we return an error */ + if (strm->zalloc == (alloc_func)0) { +#ifdef Z_SOLO + return Z_STREAM_ERROR; +#else + strm->zalloc = zcalloc; + strm->opaque = (voidpf)0; +#endif + } + if (strm->zfree == (free_func)0) +#ifdef Z_SOLO + return Z_STREAM_ERROR; +#else + strm->zfree = zcfree; +#endif + state = (struct inflate_state FAR *)ZALLOC(strm, 1, + sizeof(struct inflate_state)); + if (state == Z_NULL) return Z_MEM_ERROR; + Tracev((stderr, "inflate: allocated\n")); + strm->state = (struct internal_state FAR *)state; + state->dmax = 32768U; + state->wbits = windowBits; + state->wsize = 1U << windowBits; + state->window = window; + state->wnext = 0; + state->whave = 0; + return Z_OK; +} + +/* + Return state with length and distance decoding tables and index sizes set to + fixed code decoding. Normally this returns fixed tables from inffixed.h. + If BUILDFIXED is defined, then instead this routine builds the tables the + first time it's called, and returns those tables the first time and + thereafter. This reduces the size of the code by about 2K bytes, in + exchange for a little execution time. However, BUILDFIXED should not be + used for threaded applications, since the rewriting of the tables and virgin + may not be thread-safe. + */ +local void fixedtables(state) +struct inflate_state FAR *state; +{ +#ifdef BUILDFIXED + static int virgin = 1; + static code *lenfix, *distfix; + static code fixed[544]; + + /* build fixed huffman tables if first call (may not be thread safe) */ + if (virgin) { + unsigned sym, bits; + static code *next; + + /* literal/length table */ + sym = 0; + while (sym < 144) state->lens[sym++] = 8; + while (sym < 256) state->lens[sym++] = 9; + while (sym < 280) state->lens[sym++] = 7; + while (sym < 288) state->lens[sym++] = 8; + next = fixed; + lenfix = next; + bits = 9; + inflate_table(LENS, state->lens, 288, &(next), &(bits), state->work); + + /* distance table */ + sym = 0; + while (sym < 32) state->lens[sym++] = 5; + distfix = next; + bits = 5; + inflate_table(DISTS, state->lens, 32, &(next), &(bits), state->work); + + /* do this just once */ + virgin = 0; + } +#else /* !BUILDFIXED */ +# include "inffixed.h" +#endif /* BUILDFIXED */ + state->lencode = lenfix; + state->lenbits = 9; + state->distcode = distfix; + state->distbits = 5; +} + +/* Macros for inflateBack(): */ + +/* Load returned state from inflate_fast() */ +#define LOAD() \ + do { \ + put = strm->next_out; \ + left = strm->avail_out; \ + next = strm->next_in; \ + have = strm->avail_in; \ + hold = state->hold; \ + bits = state->bits; \ + } while (0) + +/* Set state from registers for inflate_fast() */ +#define RESTORE() \ + do { \ + strm->next_out = put; \ + strm->avail_out = left; \ + strm->next_in = next; \ + strm->avail_in = have; \ + state->hold = hold; \ + state->bits = bits; \ + } while (0) + +/* Clear the input bit accumulator */ +#define INITBITS() \ + do { \ + hold = 0; \ + bits = 0; \ + } while (0) + +/* Assure that some input is available. If input is requested, but denied, + then return a Z_BUF_ERROR from inflateBack(). */ +#define PULL() \ + do { \ + if (have == 0) { \ + have = in(in_desc, &next); \ + if (have == 0) { \ + next = Z_NULL; \ + ret = Z_BUF_ERROR; \ + goto inf_leave; \ + } \ + } \ + } while (0) + +/* Get a byte of input into the bit accumulator, or return from inflateBack() + with an error if there is no input available. */ +#define PULLBYTE() \ + do { \ + PULL(); \ + have--; \ + hold += (unsigned long)(*next++) << bits; \ + bits += 8; \ + } while (0) + +/* Assure that there are at least n bits in the bit accumulator. If there is + not enough available input to do that, then return from inflateBack() with + an error. */ +#define NEEDBITS(n) \ + do { \ + while (bits < (unsigned)(n)) \ + PULLBYTE(); \ + } while (0) + +/* Return the low n bits of the bit accumulator (n < 16) */ +#define BITS(n) \ + ((unsigned)hold & ((1U << (n)) - 1)) + +/* Remove n bits from the bit accumulator */ +#define DROPBITS(n) \ + do { \ + hold >>= (n); \ + bits -= (unsigned)(n); \ + } while (0) + +/* Remove zero to seven bits as needed to go to a byte boundary */ +#define BYTEBITS() \ + do { \ + hold >>= bits & 7; \ + bits -= bits & 7; \ + } while (0) + +/* Assure that some output space is available, by writing out the window + if it's full. If the write fails, return from inflateBack() with a + Z_BUF_ERROR. */ +#define ROOM() \ + do { \ + if (left == 0) { \ + put = state->window; \ + left = state->wsize; \ + state->whave = left; \ + if (out(out_desc, put, left)) { \ + ret = Z_BUF_ERROR; \ + goto inf_leave; \ + } \ + } \ + } while (0) + +/* + strm provides the memory allocation functions and window buffer on input, + and provides information on the unused input on return. For Z_DATA_ERROR + returns, strm will also provide an error message. + + in() and out() are the call-back input and output functions. When + inflateBack() needs more input, it calls in(). When inflateBack() has + filled the window with output, or when it completes with data in the + window, it calls out() to write out the data. The application must not + change the provided input until in() is called again or inflateBack() + returns. The application must not change the window/output buffer until + inflateBack() returns. + + in() and out() are called with a descriptor parameter provided in the + inflateBack() call. This parameter can be a structure that provides the + information required to do the read or write, as well as accumulated + information on the input and output such as totals and check values. + + in() should return zero on failure. out() should return non-zero on + failure. If either in() or out() fails, than inflateBack() returns a + Z_BUF_ERROR. strm->next_in can be checked for Z_NULL to see whether it + was in() or out() that caused in the error. Otherwise, inflateBack() + returns Z_STREAM_END on success, Z_DATA_ERROR for an deflate format + error, or Z_MEM_ERROR if it could not allocate memory for the state. + inflateBack() can also return Z_STREAM_ERROR if the input parameters + are not correct, i.e. strm is Z_NULL or the state was not initialized. + */ +int ZEXPORT inflateBack(strm, in, in_desc, out, out_desc) +z_streamp strm; +in_func in; +void FAR *in_desc; +out_func out; +void FAR *out_desc; +{ + struct inflate_state FAR *state; + z_const unsigned char FAR *next; /* next input */ + unsigned char FAR *put; /* next output */ + unsigned have, left; /* available input and output */ + unsigned long hold; /* bit buffer */ + unsigned bits; /* bits in bit buffer */ + unsigned copy; /* number of stored or match bytes to copy */ + unsigned char FAR *from; /* where to copy match bytes from */ + code here; /* current decoding table entry */ + code last; /* parent table entry */ + unsigned len; /* length to copy for repeats, bits to drop */ + int ret; /* return code */ + static const unsigned short order[19] = /* permutation of code lengths */ + {16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15}; + + /* Check that the strm exists and that the state was initialized */ + if (strm == Z_NULL || strm->state == Z_NULL) + return Z_STREAM_ERROR; + state = (struct inflate_state FAR *)strm->state; + + /* Reset the state */ + strm->msg = Z_NULL; + state->mode = TYPE; + state->last = 0; + state->whave = 0; + next = strm->next_in; + have = next != Z_NULL ? strm->avail_in : 0; + hold = 0; + bits = 0; + put = state->window; + left = state->wsize; + + /* Inflate until end of block marked as last */ + for (;;) + switch (state->mode) { + case TYPE: + /* determine and dispatch block type */ + if (state->last) { + BYTEBITS(); + state->mode = DONE; + break; + } + NEEDBITS(3); + state->last = BITS(1); + DROPBITS(1); + switch (BITS(2)) { + case 0: /* stored block */ + Tracev((stderr, "inflate: stored block%s\n", + state->last ? " (last)" : "")); + state->mode = STORED; + break; + case 1: /* fixed block */ + fixedtables(state); + Tracev((stderr, "inflate: fixed codes block%s\n", + state->last ? " (last)" : "")); + state->mode = LEN; /* decode codes */ + break; + case 2: /* dynamic block */ + Tracev((stderr, "inflate: dynamic codes block%s\n", + state->last ? " (last)" : "")); + state->mode = TABLE; + break; + case 3: + strm->msg = (char *)"invalid block type"; + state->mode = BAD; + } + DROPBITS(2); + break; + + case STORED: + /* get and verify stored block length */ + BYTEBITS(); /* go to byte boundary */ + NEEDBITS(32); + if ((hold & 0xffff) != ((hold >> 16) ^ 0xffff)) { + strm->msg = (char *)"invalid stored block lengths"; + state->mode = BAD; + break; + } + state->length = (unsigned)hold & 0xffff; + Tracev((stderr, "inflate: stored length %u\n", + state->length)); + INITBITS(); + + /* copy stored block from input to output */ + while (state->length != 0) { + copy = state->length; + PULL(); + ROOM(); + if (copy > have) copy = have; + if (copy > left) copy = left; + zmemcpy(put, next, copy); + have -= copy; + next += copy; + left -= copy; + put += copy; + state->length -= copy; + } + Tracev((stderr, "inflate: stored end\n")); + state->mode = TYPE; + break; + + case TABLE: + /* get dynamic table entries descriptor */ + NEEDBITS(14); + state->nlen = BITS(5) + 257; + DROPBITS(5); + state->ndist = BITS(5) + 1; + DROPBITS(5); + state->ncode = BITS(4) + 4; + DROPBITS(4); +#ifndef PKZIP_BUG_WORKAROUND + if (state->nlen > 286 || state->ndist > 30) { + strm->msg = (char *)"too many length or distance symbols"; + state->mode = BAD; + break; + } +#endif + Tracev((stderr, "inflate: table sizes ok\n")); + + /* get code length code lengths (not a typo) */ + state->have = 0; + while (state->have < state->ncode) { + NEEDBITS(3); + state->lens[order[state->have++]] = (unsigned short)BITS(3); + DROPBITS(3); + } + while (state->have < 19) + state->lens[order[state->have++]] = 0; + state->next = state->codes; + state->lencode = (code const FAR *)(state->next); + state->lenbits = 7; + ret = inflate_table(CODES, state->lens, 19, &(state->next), + &(state->lenbits), state->work); + if (ret) { + strm->msg = (char *)"invalid code lengths set"; + state->mode = BAD; + break; + } + Tracev((stderr, "inflate: code lengths ok\n")); + + /* get length and distance code code lengths */ + state->have = 0; + while (state->have < state->nlen + state->ndist) { + for (;;) { + here = state->lencode[BITS(state->lenbits)]; + if ((unsigned)(here.bits) <= bits) break; + PULLBYTE(); + } + if (here.val < 16) { + DROPBITS(here.bits); + state->lens[state->have++] = here.val; + } + else { + if (here.val == 16) { + NEEDBITS(here.bits + 2); + DROPBITS(here.bits); + if (state->have == 0) { + strm->msg = (char *)"invalid bit length repeat"; + state->mode = BAD; + break; + } + len = (unsigned)(state->lens[state->have - 1]); + copy = 3 + BITS(2); + DROPBITS(2); + } + else if (here.val == 17) { + NEEDBITS(here.bits + 3); + DROPBITS(here.bits); + len = 0; + copy = 3 + BITS(3); + DROPBITS(3); + } + else { + NEEDBITS(here.bits + 7); + DROPBITS(here.bits); + len = 0; + copy = 11 + BITS(7); + DROPBITS(7); + } + if (state->have + copy > state->nlen + state->ndist) { + strm->msg = (char *)"invalid bit length repeat"; + state->mode = BAD; + break; + } + while (copy--) + state->lens[state->have++] = (unsigned short)len; + } + } + + /* handle error breaks in while */ + if (state->mode == BAD) break; + + /* check for end-of-block code (better have one) */ + if (state->lens[256] == 0) { + strm->msg = (char *)"invalid code -- missing end-of-block"; + state->mode = BAD; + break; + } + + /* build code tables -- note: do not change the lenbits or distbits + values here (9 and 6) without reading the comments in inftrees.h + concerning the ENOUGH constants, which depend on those values */ + state->next = state->codes; + state->lencode = (code const FAR *)(state->next); + state->lenbits = 9; + ret = inflate_table(LENS, state->lens, state->nlen, &(state->next), + &(state->lenbits), state->work); + if (ret) { + strm->msg = (char *)"invalid literal/lengths set"; + state->mode = BAD; + break; + } + state->distcode = (code const FAR *)(state->next); + state->distbits = 6; + ret = inflate_table(DISTS, state->lens + state->nlen, state->ndist, + &(state->next), &(state->distbits), state->work); + if (ret) { + strm->msg = (char *)"invalid distances set"; + state->mode = BAD; + break; + } + Tracev((stderr, "inflate: codes ok\n")); + state->mode = LEN; + + case LEN: + /* use inflate_fast() if we have enough input and output */ + if (have >= 6 && left >= 258) { + RESTORE(); + if (state->whave < state->wsize) + state->whave = state->wsize - left; + inflate_fast(strm, state->wsize); + LOAD(); + break; + } + + /* get a literal, length, or end-of-block code */ + for (;;) { + here = state->lencode[BITS(state->lenbits)]; + if ((unsigned)(here.bits) <= bits) break; + PULLBYTE(); + } + if (here.op && (here.op & 0xf0) == 0) { + last = here; + for (;;) { + here = state->lencode[last.val + + (BITS(last.bits + last.op) >> last.bits)]; + if ((unsigned)(last.bits + here.bits) <= bits) break; + PULLBYTE(); + } + DROPBITS(last.bits); + } + DROPBITS(here.bits); + state->length = (unsigned)here.val; + + /* process literal */ + if (here.op == 0) { + Tracevv((stderr, here.val >= 0x20 && here.val < 0x7f ? + "inflate: literal '%c'\n" : + "inflate: literal 0x%02x\n", here.val)); + ROOM(); + *put++ = (unsigned char)(state->length); + left--; + state->mode = LEN; + break; + } + + /* process end of block */ + if (here.op & 32) { + Tracevv((stderr, "inflate: end of block\n")); + state->mode = TYPE; + break; + } + + /* invalid code */ + if (here.op & 64) { + strm->msg = (char *)"invalid literal/length code"; + state->mode = BAD; + break; + } + + /* length code -- get extra bits, if any */ + state->extra = (unsigned)(here.op) & 15; + if (state->extra != 0) { + NEEDBITS(state->extra); + state->length += BITS(state->extra); + DROPBITS(state->extra); + } + Tracevv((stderr, "inflate: length %u\n", state->length)); + + /* get distance code */ + for (;;) { + here = state->distcode[BITS(state->distbits)]; + if ((unsigned)(here.bits) <= bits) break; + PULLBYTE(); + } + if ((here.op & 0xf0) == 0) { + last = here; + for (;;) { + here = state->distcode[last.val + + (BITS(last.bits + last.op) >> last.bits)]; + if ((unsigned)(last.bits + here.bits) <= bits) break; + PULLBYTE(); + } + DROPBITS(last.bits); + } + DROPBITS(here.bits); + if (here.op & 64) { + strm->msg = (char *)"invalid distance code"; + state->mode = BAD; + break; + } + state->offset = (unsigned)here.val; + + /* get distance extra bits, if any */ + state->extra = (unsigned)(here.op) & 15; + if (state->extra != 0) { + NEEDBITS(state->extra); + state->offset += BITS(state->extra); + DROPBITS(state->extra); + } + if (state->offset > state->wsize - (state->whave < state->wsize ? + left : 0)) { + strm->msg = (char *)"invalid distance too far back"; + state->mode = BAD; + break; + } + Tracevv((stderr, "inflate: distance %u\n", state->offset)); + + /* copy match from window to output */ + do { + ROOM(); + copy = state->wsize - state->offset; + if (copy < left) { + from = put + copy; + copy = left - copy; + } + else { + from = put - state->offset; + copy = left; + } + if (copy > state->length) copy = state->length; + state->length -= copy; + left -= copy; + do { + *put++ = *from++; + } while (--copy); + } while (state->length != 0); + break; + + case DONE: + /* inflate stream terminated properly -- write leftover output */ + ret = Z_STREAM_END; + if (left < state->wsize) { + if (out(out_desc, state->window, state->wsize - left)) + ret = Z_BUF_ERROR; + } + goto inf_leave; + + case BAD: + ret = Z_DATA_ERROR; + goto inf_leave; + + default: /* can't happen, but makes compilers happy */ + ret = Z_STREAM_ERROR; + goto inf_leave; + } + + /* Return unused input */ + inf_leave: + strm->next_in = next; + strm->avail_in = have; + return ret; +} + +int ZEXPORT inflateBackEnd(strm) +z_streamp strm; +{ + if (strm == Z_NULL || strm->state == Z_NULL || strm->zfree == (free_func)0) + return Z_STREAM_ERROR; + ZFREE(strm, strm->state); + strm->state = Z_NULL; + Tracev((stderr, "inflate: end\n")); + return Z_OK; +} diff --git a/software/scsi2sd-util/zlib-1.2.8/inffast.c b/software/scsi2sd-util/zlib-1.2.8/inffast.c new file mode 100644 index 0000000..bda59ce --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/inffast.c @@ -0,0 +1,340 @@ +/* inffast.c -- fast decoding + * Copyright (C) 1995-2008, 2010, 2013 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +#include "zutil.h" +#include "inftrees.h" +#include "inflate.h" +#include "inffast.h" + +#ifndef ASMINF + +/* Allow machine dependent optimization for post-increment or pre-increment. + Based on testing to date, + Pre-increment preferred for: + - PowerPC G3 (Adler) + - MIPS R5000 (Randers-Pehrson) + Post-increment preferred for: + - none + No measurable difference: + - Pentium III (Anderson) + - M68060 (Nikl) + */ +#ifdef POSTINC +# define OFF 0 +# define PUP(a) *(a)++ +#else +# define OFF 1 +# define PUP(a) *++(a) +#endif + +/* + Decode literal, length, and distance codes and write out the resulting + literal and match bytes until either not enough input or output is + available, an end-of-block is encountered, or a data error is encountered. + When large enough input and output buffers are supplied to inflate(), for + example, a 16K input buffer and a 64K output buffer, more than 95% of the + inflate execution time is spent in this routine. + + Entry assumptions: + + state->mode == LEN + strm->avail_in >= 6 + strm->avail_out >= 258 + start >= strm->avail_out + state->bits < 8 + + On return, state->mode is one of: + + LEN -- ran out of enough output space or enough available input + TYPE -- reached end of block code, inflate() to interpret next block + BAD -- error in block data + + Notes: + + - The maximum input bits used by a length/distance pair is 15 bits for the + length code, 5 bits for the length extra, 15 bits for the distance code, + and 13 bits for the distance extra. This totals 48 bits, or six bytes. + Therefore if strm->avail_in >= 6, then there is enough input to avoid + checking for available input while decoding. + + - The maximum bytes that a single length/distance pair can output is 258 + bytes, which is the maximum length that can be coded. inflate_fast() + requires strm->avail_out >= 258 for each loop to avoid checking for + output space. + */ +void ZLIB_INTERNAL inflate_fast(strm, start) +z_streamp strm; +unsigned start; /* inflate()'s starting value for strm->avail_out */ +{ + struct inflate_state FAR *state; + z_const unsigned char FAR *in; /* local strm->next_in */ + z_const unsigned char FAR *last; /* have enough input while in < last */ + unsigned char FAR *out; /* local strm->next_out */ + unsigned char FAR *beg; /* inflate()'s initial strm->next_out */ + unsigned char FAR *end; /* while out < end, enough space available */ +#ifdef INFLATE_STRICT + unsigned dmax; /* maximum distance from zlib header */ +#endif + unsigned wsize; /* window size or zero if not using window */ + unsigned whave; /* valid bytes in the window */ + unsigned wnext; /* window write index */ + unsigned char FAR *window; /* allocated sliding window, if wsize != 0 */ + unsigned long hold; /* local strm->hold */ + unsigned bits; /* local strm->bits */ + code const FAR *lcode; /* local strm->lencode */ + code const FAR *dcode; /* local strm->distcode */ + unsigned lmask; /* mask for first level of length codes */ + unsigned dmask; /* mask for first level of distance codes */ + code here; /* retrieved table entry */ + unsigned op; /* code bits, operation, extra bits, or */ + /* window position, window bytes to copy */ + unsigned len; /* match length, unused bytes */ + unsigned dist; /* match distance */ + unsigned char FAR *from; /* where to copy match from */ + + /* copy state to local variables */ + state = (struct inflate_state FAR *)strm->state; + in = strm->next_in - OFF; + last = in + (strm->avail_in - 5); + out = strm->next_out - OFF; + beg = out - (start - strm->avail_out); + end = out + (strm->avail_out - 257); +#ifdef INFLATE_STRICT + dmax = state->dmax; +#endif + wsize = state->wsize; + whave = state->whave; + wnext = state->wnext; + window = state->window; + hold = state->hold; + bits = state->bits; + lcode = state->lencode; + dcode = state->distcode; + lmask = (1U << state->lenbits) - 1; + dmask = (1U << state->distbits) - 1; + + /* decode literals and length/distances until end-of-block or not enough + input data or output space */ + do { + if (bits < 15) { + hold += (unsigned long)(PUP(in)) << bits; + bits += 8; + hold += (unsigned long)(PUP(in)) << bits; + bits += 8; + } + here = lcode[hold & lmask]; + dolen: + op = (unsigned)(here.bits); + hold >>= op; + bits -= op; + op = (unsigned)(here.op); + if (op == 0) { /* literal */ + Tracevv((stderr, here.val >= 0x20 && here.val < 0x7f ? + "inflate: literal '%c'\n" : + "inflate: literal 0x%02x\n", here.val)); + PUP(out) = (unsigned char)(here.val); + } + else if (op & 16) { /* length base */ + len = (unsigned)(here.val); + op &= 15; /* number of extra bits */ + if (op) { + if (bits < op) { + hold += (unsigned long)(PUP(in)) << bits; + bits += 8; + } + len += (unsigned)hold & ((1U << op) - 1); + hold >>= op; + bits -= op; + } + Tracevv((stderr, "inflate: length %u\n", len)); + if (bits < 15) { + hold += (unsigned long)(PUP(in)) << bits; + bits += 8; + hold += (unsigned long)(PUP(in)) << bits; + bits += 8; + } + here = dcode[hold & dmask]; + dodist: + op = (unsigned)(here.bits); + hold >>= op; + bits -= op; + op = (unsigned)(here.op); + if (op & 16) { /* distance base */ + dist = (unsigned)(here.val); + op &= 15; /* number of extra bits */ + if (bits < op) { + hold += (unsigned long)(PUP(in)) << bits; + bits += 8; + if (bits < op) { + hold += (unsigned long)(PUP(in)) << bits; + bits += 8; + } + } + dist += (unsigned)hold & ((1U << op) - 1); +#ifdef INFLATE_STRICT + if (dist > dmax) { + strm->msg = (char *)"invalid distance too far back"; + state->mode = BAD; + break; + } +#endif + hold >>= op; + bits -= op; + Tracevv((stderr, "inflate: distance %u\n", dist)); + op = (unsigned)(out - beg); /* max distance in output */ + if (dist > op) { /* see if copy from window */ + op = dist - op; /* distance back in window */ + if (op > whave) { + if (state->sane) { + strm->msg = + (char *)"invalid distance too far back"; + state->mode = BAD; + break; + } +#ifdef INFLATE_ALLOW_INVALID_DISTANCE_TOOFAR_ARRR + if (len <= op - whave) { + do { + PUP(out) = 0; + } while (--len); + continue; + } + len -= op - whave; + do { + PUP(out) = 0; + } while (--op > whave); + if (op == 0) { + from = out - dist; + do { + PUP(out) = PUP(from); + } while (--len); + continue; + } +#endif + } + from = window - OFF; + if (wnext == 0) { /* very common case */ + from += wsize - op; + if (op < len) { /* some from window */ + len -= op; + do { + PUP(out) = PUP(from); + } while (--op); + from = out - dist; /* rest from output */ + } + } + else if (wnext < op) { /* wrap around window */ + from += wsize + wnext - op; + op -= wnext; + if (op < len) { /* some from end of window */ + len -= op; + do { + PUP(out) = PUP(from); + } while (--op); + from = window - OFF; + if (wnext < len) { /* some from start of window */ + op = wnext; + len -= op; + do { + PUP(out) = PUP(from); + } while (--op); + from = out - dist; /* rest from output */ + } + } + } + else { /* contiguous in window */ + from += wnext - op; + if (op < len) { /* some from window */ + len -= op; + do { + PUP(out) = PUP(from); + } while (--op); + from = out - dist; /* rest from output */ + } + } + while (len > 2) { + PUP(out) = PUP(from); + PUP(out) = PUP(from); + PUP(out) = PUP(from); + len -= 3; + } + if (len) { + PUP(out) = PUP(from); + if (len > 1) + PUP(out) = PUP(from); + } + } + else { + from = out - dist; /* copy direct from output */ + do { /* minimum length is three */ + PUP(out) = PUP(from); + PUP(out) = PUP(from); + PUP(out) = PUP(from); + len -= 3; + } while (len > 2); + if (len) { + PUP(out) = PUP(from); + if (len > 1) + PUP(out) = PUP(from); + } + } + } + else if ((op & 64) == 0) { /* 2nd level distance code */ + here = dcode[here.val + (hold & ((1U << op) - 1))]; + goto dodist; + } + else { + strm->msg = (char *)"invalid distance code"; + state->mode = BAD; + break; + } + } + else if ((op & 64) == 0) { /* 2nd level length code */ + here = lcode[here.val + (hold & ((1U << op) - 1))]; + goto dolen; + } + else if (op & 32) { /* end-of-block */ + Tracevv((stderr, "inflate: end of block\n")); + state->mode = TYPE; + break; + } + else { + strm->msg = (char *)"invalid literal/length code"; + state->mode = BAD; + break; + } + } while (in < last && out < end); + + /* return unused bytes (on entry, bits < 8, so in won't go too far back) */ + len = bits >> 3; + in -= len; + bits -= len << 3; + hold &= (1U << bits) - 1; + + /* update state and return */ + strm->next_in = in + OFF; + strm->next_out = out + OFF; + strm->avail_in = (unsigned)(in < last ? 5 + (last - in) : 5 - (in - last)); + strm->avail_out = (unsigned)(out < end ? + 257 + (end - out) : 257 - (out - end)); + state->hold = hold; + state->bits = bits; + return; +} + +/* + inflate_fast() speedups that turned out slower (on a PowerPC G3 750CXe): + - Using bit fields for code structure + - Different op definition to avoid & for extra bits (do & for table bits) + - Three separate decoding do-loops for direct, window, and wnext == 0 + - Special case for distance > 1 copies to do overlapped load and store copy + - Explicit branch predictions (based on measured branch probabilities) + - Deferring match copy and interspersed it with decoding subsequent codes + - Swapping literal/length else + - Swapping window/direct else + - Larger unrolled copy loops (three is about right) + - Moving len -= 3 statement into middle of loop + */ + +#endif /* !ASMINF */ diff --git a/software/scsi2sd-util/zlib-1.2.8/inffast.h b/software/scsi2sd-util/zlib-1.2.8/inffast.h new file mode 100644 index 0000000..e5c1aa4 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/inffast.h @@ -0,0 +1,11 @@ +/* inffast.h -- header to use inffast.c + * Copyright (C) 1995-2003, 2010 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* WARNING: this file should *not* be used by applications. It is + part of the implementation of the compression library and is + subject to change. Applications should only use zlib.h. + */ + +void ZLIB_INTERNAL inflate_fast OF((z_streamp strm, unsigned start)); diff --git a/software/scsi2sd-util/zlib-1.2.8/inffixed.h b/software/scsi2sd-util/zlib-1.2.8/inffixed.h new file mode 100644 index 0000000..d628327 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/inffixed.h @@ -0,0 +1,94 @@ + /* inffixed.h -- table for decoding fixed codes + * Generated automatically by makefixed(). + */ + + /* WARNING: this file should *not* be used by applications. + It is part of the implementation of this library and is + subject to change. Applications should only use zlib.h. + */ + + static const code lenfix[512] = { + {96,7,0},{0,8,80},{0,8,16},{20,8,115},{18,7,31},{0,8,112},{0,8,48}, + {0,9,192},{16,7,10},{0,8,96},{0,8,32},{0,9,160},{0,8,0},{0,8,128}, + {0,8,64},{0,9,224},{16,7,6},{0,8,88},{0,8,24},{0,9,144},{19,7,59}, + {0,8,120},{0,8,56},{0,9,208},{17,7,17},{0,8,104},{0,8,40},{0,9,176}, + {0,8,8},{0,8,136},{0,8,72},{0,9,240},{16,7,4},{0,8,84},{0,8,20}, + {21,8,227},{19,7,43},{0,8,116},{0,8,52},{0,9,200},{17,7,13},{0,8,100}, + {0,8,36},{0,9,168},{0,8,4},{0,8,132},{0,8,68},{0,9,232},{16,7,8}, + {0,8,92},{0,8,28},{0,9,152},{20,7,83},{0,8,124},{0,8,60},{0,9,216}, + {18,7,23},{0,8,108},{0,8,44},{0,9,184},{0,8,12},{0,8,140},{0,8,76}, + {0,9,248},{16,7,3},{0,8,82},{0,8,18},{21,8,163},{19,7,35},{0,8,114}, + {0,8,50},{0,9,196},{17,7,11},{0,8,98},{0,8,34},{0,9,164},{0,8,2}, + {0,8,130},{0,8,66},{0,9,228},{16,7,7},{0,8,90},{0,8,26},{0,9,148}, + {20,7,67},{0,8,122},{0,8,58},{0,9,212},{18,7,19},{0,8,106},{0,8,42}, + {0,9,180},{0,8,10},{0,8,138},{0,8,74},{0,9,244},{16,7,5},{0,8,86}, + {0,8,22},{64,8,0},{19,7,51},{0,8,118},{0,8,54},{0,9,204},{17,7,15}, + {0,8,102},{0,8,38},{0,9,172},{0,8,6},{0,8,134},{0,8,70},{0,9,236}, + {16,7,9},{0,8,94},{0,8,30},{0,9,156},{20,7,99},{0,8,126},{0,8,62}, + {0,9,220},{18,7,27},{0,8,110},{0,8,46},{0,9,188},{0,8,14},{0,8,142}, + {0,8,78},{0,9,252},{96,7,0},{0,8,81},{0,8,17},{21,8,131},{18,7,31}, + {0,8,113},{0,8,49},{0,9,194},{16,7,10},{0,8,97},{0,8,33},{0,9,162}, + {0,8,1},{0,8,129},{0,8,65},{0,9,226},{16,7,6},{0,8,89},{0,8,25}, + {0,9,146},{19,7,59},{0,8,121},{0,8,57},{0,9,210},{17,7,17},{0,8,105}, + {0,8,41},{0,9,178},{0,8,9},{0,8,137},{0,8,73},{0,9,242},{16,7,4}, + {0,8,85},{0,8,21},{16,8,258},{19,7,43},{0,8,117},{0,8,53},{0,9,202}, + {17,7,13},{0,8,101},{0,8,37},{0,9,170},{0,8,5},{0,8,133},{0,8,69}, + {0,9,234},{16,7,8},{0,8,93},{0,8,29},{0,9,154},{20,7,83},{0,8,125}, + {0,8,61},{0,9,218},{18,7,23},{0,8,109},{0,8,45},{0,9,186},{0,8,13}, + {0,8,141},{0,8,77},{0,9,250},{16,7,3},{0,8,83},{0,8,19},{21,8,195}, + {19,7,35},{0,8,115},{0,8,51},{0,9,198},{17,7,11},{0,8,99},{0,8,35}, + {0,9,166},{0,8,3},{0,8,131},{0,8,67},{0,9,230},{16,7,7},{0,8,91}, + {0,8,27},{0,9,150},{20,7,67},{0,8,123},{0,8,59},{0,9,214},{18,7,19}, + {0,8,107},{0,8,43},{0,9,182},{0,8,11},{0,8,139},{0,8,75},{0,9,246}, + {16,7,5},{0,8,87},{0,8,23},{64,8,0},{19,7,51},{0,8,119},{0,8,55}, + {0,9,206},{17,7,15},{0,8,103},{0,8,39},{0,9,174},{0,8,7},{0,8,135}, + {0,8,71},{0,9,238},{16,7,9},{0,8,95},{0,8,31},{0,9,158},{20,7,99}, + {0,8,127},{0,8,63},{0,9,222},{18,7,27},{0,8,111},{0,8,47},{0,9,190}, + {0,8,15},{0,8,143},{0,8,79},{0,9,254},{96,7,0},{0,8,80},{0,8,16}, + {20,8,115},{18,7,31},{0,8,112},{0,8,48},{0,9,193},{16,7,10},{0,8,96}, + {0,8,32},{0,9,161},{0,8,0},{0,8,128},{0,8,64},{0,9,225},{16,7,6}, + {0,8,88},{0,8,24},{0,9,145},{19,7,59},{0,8,120},{0,8,56},{0,9,209}, + {17,7,17},{0,8,104},{0,8,40},{0,9,177},{0,8,8},{0,8,136},{0,8,72}, + {0,9,241},{16,7,4},{0,8,84},{0,8,20},{21,8,227},{19,7,43},{0,8,116}, + {0,8,52},{0,9,201},{17,7,13},{0,8,100},{0,8,36},{0,9,169},{0,8,4}, + {0,8,132},{0,8,68},{0,9,233},{16,7,8},{0,8,92},{0,8,28},{0,9,153}, + {20,7,83},{0,8,124},{0,8,60},{0,9,217},{18,7,23},{0,8,108},{0,8,44}, + {0,9,185},{0,8,12},{0,8,140},{0,8,76},{0,9,249},{16,7,3},{0,8,82}, + {0,8,18},{21,8,163},{19,7,35},{0,8,114},{0,8,50},{0,9,197},{17,7,11}, + {0,8,98},{0,8,34},{0,9,165},{0,8,2},{0,8,130},{0,8,66},{0,9,229}, + {16,7,7},{0,8,90},{0,8,26},{0,9,149},{20,7,67},{0,8,122},{0,8,58}, + {0,9,213},{18,7,19},{0,8,106},{0,8,42},{0,9,181},{0,8,10},{0,8,138}, + {0,8,74},{0,9,245},{16,7,5},{0,8,86},{0,8,22},{64,8,0},{19,7,51}, + {0,8,118},{0,8,54},{0,9,205},{17,7,15},{0,8,102},{0,8,38},{0,9,173}, + {0,8,6},{0,8,134},{0,8,70},{0,9,237},{16,7,9},{0,8,94},{0,8,30}, + {0,9,157},{20,7,99},{0,8,126},{0,8,62},{0,9,221},{18,7,27},{0,8,110}, + {0,8,46},{0,9,189},{0,8,14},{0,8,142},{0,8,78},{0,9,253},{96,7,0}, + {0,8,81},{0,8,17},{21,8,131},{18,7,31},{0,8,113},{0,8,49},{0,9,195}, + {16,7,10},{0,8,97},{0,8,33},{0,9,163},{0,8,1},{0,8,129},{0,8,65}, + {0,9,227},{16,7,6},{0,8,89},{0,8,25},{0,9,147},{19,7,59},{0,8,121}, + {0,8,57},{0,9,211},{17,7,17},{0,8,105},{0,8,41},{0,9,179},{0,8,9}, + {0,8,137},{0,8,73},{0,9,243},{16,7,4},{0,8,85},{0,8,21},{16,8,258}, + {19,7,43},{0,8,117},{0,8,53},{0,9,203},{17,7,13},{0,8,101},{0,8,37}, + {0,9,171},{0,8,5},{0,8,133},{0,8,69},{0,9,235},{16,7,8},{0,8,93}, + {0,8,29},{0,9,155},{20,7,83},{0,8,125},{0,8,61},{0,9,219},{18,7,23}, + {0,8,109},{0,8,45},{0,9,187},{0,8,13},{0,8,141},{0,8,77},{0,9,251}, + {16,7,3},{0,8,83},{0,8,19},{21,8,195},{19,7,35},{0,8,115},{0,8,51}, + {0,9,199},{17,7,11},{0,8,99},{0,8,35},{0,9,167},{0,8,3},{0,8,131}, + {0,8,67},{0,9,231},{16,7,7},{0,8,91},{0,8,27},{0,9,151},{20,7,67}, + {0,8,123},{0,8,59},{0,9,215},{18,7,19},{0,8,107},{0,8,43},{0,9,183}, + {0,8,11},{0,8,139},{0,8,75},{0,9,247},{16,7,5},{0,8,87},{0,8,23}, + {64,8,0},{19,7,51},{0,8,119},{0,8,55},{0,9,207},{17,7,15},{0,8,103}, + {0,8,39},{0,9,175},{0,8,7},{0,8,135},{0,8,71},{0,9,239},{16,7,9}, + {0,8,95},{0,8,31},{0,9,159},{20,7,99},{0,8,127},{0,8,63},{0,9,223}, + {18,7,27},{0,8,111},{0,8,47},{0,9,191},{0,8,15},{0,8,143},{0,8,79}, + {0,9,255} + }; + + static const code distfix[32] = { + {16,5,1},{23,5,257},{19,5,17},{27,5,4097},{17,5,5},{25,5,1025}, + {21,5,65},{29,5,16385},{16,5,3},{24,5,513},{20,5,33},{28,5,8193}, + {18,5,9},{26,5,2049},{22,5,129},{64,5,0},{16,5,2},{23,5,385}, + {19,5,25},{27,5,6145},{17,5,7},{25,5,1537},{21,5,97},{29,5,24577}, + {16,5,4},{24,5,769},{20,5,49},{28,5,12289},{18,5,13},{26,5,3073}, + {22,5,193},{64,5,0} + }; diff --git a/software/scsi2sd-util/zlib-1.2.8/inflate.c b/software/scsi2sd-util/zlib-1.2.8/inflate.c new file mode 100644 index 0000000..870f89b --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/inflate.c @@ -0,0 +1,1512 @@ +/* inflate.c -- zlib decompression + * Copyright (C) 1995-2012 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* + * Change history: + * + * 1.2.beta0 24 Nov 2002 + * - First version -- complete rewrite of inflate to simplify code, avoid + * creation of window when not needed, minimize use of window when it is + * needed, make inffast.c even faster, implement gzip decoding, and to + * improve code readability and style over the previous zlib inflate code + * + * 1.2.beta1 25 Nov 2002 + * - Use pointers for available input and output checking in inffast.c + * - Remove input and output counters in inffast.c + * - Change inffast.c entry and loop from avail_in >= 7 to >= 6 + * - Remove unnecessary second byte pull from length extra in inffast.c + * - Unroll direct copy to three copies per loop in inffast.c + * + * 1.2.beta2 4 Dec 2002 + * - Change external routine names to reduce potential conflicts + * - Correct filename to inffixed.h for fixed tables in inflate.c + * - Make hbuf[] unsigned char to match parameter type in inflate.c + * - Change strm->next_out[-state->offset] to *(strm->next_out - state->offset) + * to avoid negation problem on Alphas (64 bit) in inflate.c + * + * 1.2.beta3 22 Dec 2002 + * - Add comments on state->bits assertion in inffast.c + * - Add comments on op field in inftrees.h + * - Fix bug in reuse of allocated window after inflateReset() + * - Remove bit fields--back to byte structure for speed + * - Remove distance extra == 0 check in inflate_fast()--only helps for lengths + * - Change post-increments to pre-increments in inflate_fast(), PPC biased? + * - Add compile time option, POSTINC, to use post-increments instead (Intel?) + * - Make MATCH copy in inflate() much faster for when inflate_fast() not used + * - Use local copies of stream next and avail values, as well as local bit + * buffer and bit count in inflate()--for speed when inflate_fast() not used + * + * 1.2.beta4 1 Jan 2003 + * - Split ptr - 257 statements in inflate_table() to avoid compiler warnings + * - Move a comment on output buffer sizes from inffast.c to inflate.c + * - Add comments in inffast.c to introduce the inflate_fast() routine + * - Rearrange window copies in inflate_fast() for speed and simplification + * - Unroll last copy for window match in inflate_fast() + * - Use local copies of window variables in inflate_fast() for speed + * - Pull out common wnext == 0 case for speed in inflate_fast() + * - Make op and len in inflate_fast() unsigned for consistency + * - Add FAR to lcode and dcode declarations in inflate_fast() + * - Simplified bad distance check in inflate_fast() + * - Added inflateBackInit(), inflateBack(), and inflateBackEnd() in new + * source file infback.c to provide a call-back interface to inflate for + * programs like gzip and unzip -- uses window as output buffer to avoid + * window copying + * + * 1.2.beta5 1 Jan 2003 + * - Improved inflateBack() interface to allow the caller to provide initial + * input in strm. + * - Fixed stored blocks bug in inflateBack() + * + * 1.2.beta6 4 Jan 2003 + * - Added comments in inffast.c on effectiveness of POSTINC + * - Typecasting all around to reduce compiler warnings + * - Changed loops from while (1) or do {} while (1) to for (;;), again to + * make compilers happy + * - Changed type of window in inflateBackInit() to unsigned char * + * + * 1.2.beta7 27 Jan 2003 + * - Changed many types to unsigned or unsigned short to avoid warnings + * - Added inflateCopy() function + * + * 1.2.0 9 Mar 2003 + * - Changed inflateBack() interface to provide separate opaque descriptors + * for the in() and out() functions + * - Changed inflateBack() argument and in_func typedef to swap the length + * and buffer address return values for the input function + * - Check next_in and next_out for Z_NULL on entry to inflate() + * + * The history for versions after 1.2.0 are in ChangeLog in zlib distribution. + */ + +#include "zutil.h" +#include "inftrees.h" +#include "inflate.h" +#include "inffast.h" + +#ifdef MAKEFIXED +# ifndef BUILDFIXED +# define BUILDFIXED +# endif +#endif + +/* function prototypes */ +local void fixedtables OF((struct inflate_state FAR *state)); +local int updatewindow OF((z_streamp strm, const unsigned char FAR *end, + unsigned copy)); +#ifdef BUILDFIXED + void makefixed OF((void)); +#endif +local unsigned syncsearch OF((unsigned FAR *have, const unsigned char FAR *buf, + unsigned len)); + +int ZEXPORT inflateResetKeep(strm) +z_streamp strm; +{ + struct inflate_state FAR *state; + + if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; + state = (struct inflate_state FAR *)strm->state; + strm->total_in = strm->total_out = state->total = 0; + strm->msg = Z_NULL; + if (state->wrap) /* to support ill-conceived Java test suite */ + strm->adler = state->wrap & 1; + state->mode = HEAD; + state->last = 0; + state->havedict = 0; + state->dmax = 32768U; + state->head = Z_NULL; + state->hold = 0; + state->bits = 0; + state->lencode = state->distcode = state->next = state->codes; + state->sane = 1; + state->back = -1; + Tracev((stderr, "inflate: reset\n")); + return Z_OK; +} + +int ZEXPORT inflateReset(strm) +z_streamp strm; +{ + struct inflate_state FAR *state; + + if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; + state = (struct inflate_state FAR *)strm->state; + state->wsize = 0; + state->whave = 0; + state->wnext = 0; + return inflateResetKeep(strm); +} + +int ZEXPORT inflateReset2(strm, windowBits) +z_streamp strm; +int windowBits; +{ + int wrap; + struct inflate_state FAR *state; + + /* get the state */ + if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; + state = (struct inflate_state FAR *)strm->state; + + /* extract wrap request from windowBits parameter */ + if (windowBits < 0) { + wrap = 0; + windowBits = -windowBits; + } + else { + wrap = (windowBits >> 4) + 1; +#ifdef GUNZIP + if (windowBits < 48) + windowBits &= 15; +#endif + } + + /* set number of window bits, free window if different */ + if (windowBits && (windowBits < 8 || windowBits > 15)) + return Z_STREAM_ERROR; + if (state->window != Z_NULL && state->wbits != (unsigned)windowBits) { + ZFREE(strm, state->window); + state->window = Z_NULL; + } + + /* update state and reset the rest of it */ + state->wrap = wrap; + state->wbits = (unsigned)windowBits; + return inflateReset(strm); +} + +int ZEXPORT inflateInit2_(strm, windowBits, version, stream_size) +z_streamp strm; +int windowBits; +const char *version; +int stream_size; +{ + int ret; + struct inflate_state FAR *state; + + if (version == Z_NULL || version[0] != ZLIB_VERSION[0] || + stream_size != (int)(sizeof(z_stream))) + return Z_VERSION_ERROR; + if (strm == Z_NULL) return Z_STREAM_ERROR; + strm->msg = Z_NULL; /* in case we return an error */ + if (strm->zalloc == (alloc_func)0) { +#ifdef Z_SOLO + return Z_STREAM_ERROR; +#else + strm->zalloc = zcalloc; + strm->opaque = (voidpf)0; +#endif + } + if (strm->zfree == (free_func)0) +#ifdef Z_SOLO + return Z_STREAM_ERROR; +#else + strm->zfree = zcfree; +#endif + state = (struct inflate_state FAR *) + ZALLOC(strm, 1, sizeof(struct inflate_state)); + if (state == Z_NULL) return Z_MEM_ERROR; + Tracev((stderr, "inflate: allocated\n")); + strm->state = (struct internal_state FAR *)state; + state->window = Z_NULL; + ret = inflateReset2(strm, windowBits); + if (ret != Z_OK) { + ZFREE(strm, state); + strm->state = Z_NULL; + } + return ret; +} + +int ZEXPORT inflateInit_(strm, version, stream_size) +z_streamp strm; +const char *version; +int stream_size; +{ + return inflateInit2_(strm, DEF_WBITS, version, stream_size); +} + +int ZEXPORT inflatePrime(strm, bits, value) +z_streamp strm; +int bits; +int value; +{ + struct inflate_state FAR *state; + + if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; + state = (struct inflate_state FAR *)strm->state; + if (bits < 0) { + state->hold = 0; + state->bits = 0; + return Z_OK; + } + if (bits > 16 || state->bits + bits > 32) return Z_STREAM_ERROR; + value &= (1L << bits) - 1; + state->hold += value << state->bits; + state->bits += bits; + return Z_OK; +} + +/* + Return state with length and distance decoding tables and index sizes set to + fixed code decoding. Normally this returns fixed tables from inffixed.h. + If BUILDFIXED is defined, then instead this routine builds the tables the + first time it's called, and returns those tables the first time and + thereafter. This reduces the size of the code by about 2K bytes, in + exchange for a little execution time. However, BUILDFIXED should not be + used for threaded applications, since the rewriting of the tables and virgin + may not be thread-safe. + */ +local void fixedtables(state) +struct inflate_state FAR *state; +{ +#ifdef BUILDFIXED + static int virgin = 1; + static code *lenfix, *distfix; + static code fixed[544]; + + /* build fixed huffman tables if first call (may not be thread safe) */ + if (virgin) { + unsigned sym, bits; + static code *next; + + /* literal/length table */ + sym = 0; + while (sym < 144) state->lens[sym++] = 8; + while (sym < 256) state->lens[sym++] = 9; + while (sym < 280) state->lens[sym++] = 7; + while (sym < 288) state->lens[sym++] = 8; + next = fixed; + lenfix = next; + bits = 9; + inflate_table(LENS, state->lens, 288, &(next), &(bits), state->work); + + /* distance table */ + sym = 0; + while (sym < 32) state->lens[sym++] = 5; + distfix = next; + bits = 5; + inflate_table(DISTS, state->lens, 32, &(next), &(bits), state->work); + + /* do this just once */ + virgin = 0; + } +#else /* !BUILDFIXED */ +# include "inffixed.h" +#endif /* BUILDFIXED */ + state->lencode = lenfix; + state->lenbits = 9; + state->distcode = distfix; + state->distbits = 5; +} + +#ifdef MAKEFIXED +#include + +/* + Write out the inffixed.h that is #include'd above. Defining MAKEFIXED also + defines BUILDFIXED, so the tables are built on the fly. makefixed() writes + those tables to stdout, which would be piped to inffixed.h. A small program + can simply call makefixed to do this: + + void makefixed(void); + + int main(void) + { + makefixed(); + return 0; + } + + Then that can be linked with zlib built with MAKEFIXED defined and run: + + a.out > inffixed.h + */ +void makefixed() +{ + unsigned low, size; + struct inflate_state state; + + fixedtables(&state); + puts(" /* inffixed.h -- table for decoding fixed codes"); + puts(" * Generated automatically by makefixed()."); + puts(" */"); + puts(""); + puts(" /* WARNING: this file should *not* be used by applications."); + puts(" It is part of the implementation of this library and is"); + puts(" subject to change. Applications should only use zlib.h."); + puts(" */"); + puts(""); + size = 1U << 9; + printf(" static const code lenfix[%u] = {", size); + low = 0; + for (;;) { + if ((low % 7) == 0) printf("\n "); + printf("{%u,%u,%d}", (low & 127) == 99 ? 64 : state.lencode[low].op, + state.lencode[low].bits, state.lencode[low].val); + if (++low == size) break; + putchar(','); + } + puts("\n };"); + size = 1U << 5; + printf("\n static const code distfix[%u] = {", size); + low = 0; + for (;;) { + if ((low % 6) == 0) printf("\n "); + printf("{%u,%u,%d}", state.distcode[low].op, state.distcode[low].bits, + state.distcode[low].val); + if (++low == size) break; + putchar(','); + } + puts("\n };"); +} +#endif /* MAKEFIXED */ + +/* + Update the window with the last wsize (normally 32K) bytes written before + returning. If window does not exist yet, create it. This is only called + when a window is already in use, or when output has been written during this + inflate call, but the end of the deflate stream has not been reached yet. + It is also called to create a window for dictionary data when a dictionary + is loaded. + + Providing output buffers larger than 32K to inflate() should provide a speed + advantage, since only the last 32K of output is copied to the sliding window + upon return from inflate(), and since all distances after the first 32K of + output will fall in the output data, making match copies simpler and faster. + The advantage may be dependent on the size of the processor's data caches. + */ +local int updatewindow(strm, end, copy) +z_streamp strm; +const Bytef *end; +unsigned copy; +{ + struct inflate_state FAR *state; + unsigned dist; + + state = (struct inflate_state FAR *)strm->state; + + /* if it hasn't been done already, allocate space for the window */ + if (state->window == Z_NULL) { + state->window = (unsigned char FAR *) + ZALLOC(strm, 1U << state->wbits, + sizeof(unsigned char)); + if (state->window == Z_NULL) return 1; + } + + /* if window not in use yet, initialize */ + if (state->wsize == 0) { + state->wsize = 1U << state->wbits; + state->wnext = 0; + state->whave = 0; + } + + /* copy state->wsize or less output bytes into the circular window */ + if (copy >= state->wsize) { + zmemcpy(state->window, end - state->wsize, state->wsize); + state->wnext = 0; + state->whave = state->wsize; + } + else { + dist = state->wsize - state->wnext; + if (dist > copy) dist = copy; + zmemcpy(state->window + state->wnext, end - copy, dist); + copy -= dist; + if (copy) { + zmemcpy(state->window, end - copy, copy); + state->wnext = copy; + state->whave = state->wsize; + } + else { + state->wnext += dist; + if (state->wnext == state->wsize) state->wnext = 0; + if (state->whave < state->wsize) state->whave += dist; + } + } + return 0; +} + +/* Macros for inflate(): */ + +/* check function to use adler32() for zlib or crc32() for gzip */ +#ifdef GUNZIP +# define UPDATE(check, buf, len) \ + (state->flags ? crc32(check, buf, len) : adler32(check, buf, len)) +#else +# define UPDATE(check, buf, len) adler32(check, buf, len) +#endif + +/* check macros for header crc */ +#ifdef GUNZIP +# define CRC2(check, word) \ + do { \ + hbuf[0] = (unsigned char)(word); \ + hbuf[1] = (unsigned char)((word) >> 8); \ + check = crc32(check, hbuf, 2); \ + } while (0) + +# define CRC4(check, word) \ + do { \ + hbuf[0] = (unsigned char)(word); \ + hbuf[1] = (unsigned char)((word) >> 8); \ + hbuf[2] = (unsigned char)((word) >> 16); \ + hbuf[3] = (unsigned char)((word) >> 24); \ + check = crc32(check, hbuf, 4); \ + } while (0) +#endif + +/* Load registers with state in inflate() for speed */ +#define LOAD() \ + do { \ + put = strm->next_out; \ + left = strm->avail_out; \ + next = strm->next_in; \ + have = strm->avail_in; \ + hold = state->hold; \ + bits = state->bits; \ + } while (0) + +/* Restore state from registers in inflate() */ +#define RESTORE() \ + do { \ + strm->next_out = put; \ + strm->avail_out = left; \ + strm->next_in = next; \ + strm->avail_in = have; \ + state->hold = hold; \ + state->bits = bits; \ + } while (0) + +/* Clear the input bit accumulator */ +#define INITBITS() \ + do { \ + hold = 0; \ + bits = 0; \ + } while (0) + +/* Get a byte of input into the bit accumulator, or return from inflate() + if there is no input available. */ +#define PULLBYTE() \ + do { \ + if (have == 0) goto inf_leave; \ + have--; \ + hold += (unsigned long)(*next++) << bits; \ + bits += 8; \ + } while (0) + +/* Assure that there are at least n bits in the bit accumulator. If there is + not enough available input to do that, then return from inflate(). */ +#define NEEDBITS(n) \ + do { \ + while (bits < (unsigned)(n)) \ + PULLBYTE(); \ + } while (0) + +/* Return the low n bits of the bit accumulator (n < 16) */ +#define BITS(n) \ + ((unsigned)hold & ((1U << (n)) - 1)) + +/* Remove n bits from the bit accumulator */ +#define DROPBITS(n) \ + do { \ + hold >>= (n); \ + bits -= (unsigned)(n); \ + } while (0) + +/* Remove zero to seven bits as needed to go to a byte boundary */ +#define BYTEBITS() \ + do { \ + hold >>= bits & 7; \ + bits -= bits & 7; \ + } while (0) + +/* + inflate() uses a state machine to process as much input data and generate as + much output data as possible before returning. The state machine is + structured roughly as follows: + + for (;;) switch (state) { + ... + case STATEn: + if (not enough input data or output space to make progress) + return; + ... make progress ... + state = STATEm; + break; + ... + } + + so when inflate() is called again, the same case is attempted again, and + if the appropriate resources are provided, the machine proceeds to the + next state. The NEEDBITS() macro is usually the way the state evaluates + whether it can proceed or should return. NEEDBITS() does the return if + the requested bits are not available. The typical use of the BITS macros + is: + + NEEDBITS(n); + ... do something with BITS(n) ... + DROPBITS(n); + + where NEEDBITS(n) either returns from inflate() if there isn't enough + input left to load n bits into the accumulator, or it continues. BITS(n) + gives the low n bits in the accumulator. When done, DROPBITS(n) drops + the low n bits off the accumulator. INITBITS() clears the accumulator + and sets the number of available bits to zero. BYTEBITS() discards just + enough bits to put the accumulator on a byte boundary. After BYTEBITS() + and a NEEDBITS(8), then BITS(8) would return the next byte in the stream. + + NEEDBITS(n) uses PULLBYTE() to get an available byte of input, or to return + if there is no input available. The decoding of variable length codes uses + PULLBYTE() directly in order to pull just enough bytes to decode the next + code, and no more. + + Some states loop until they get enough input, making sure that enough + state information is maintained to continue the loop where it left off + if NEEDBITS() returns in the loop. For example, want, need, and keep + would all have to actually be part of the saved state in case NEEDBITS() + returns: + + case STATEw: + while (want < need) { + NEEDBITS(n); + keep[want++] = BITS(n); + DROPBITS(n); + } + state = STATEx; + case STATEx: + + As shown above, if the next state is also the next case, then the break + is omitted. + + A state may also return if there is not enough output space available to + complete that state. Those states are copying stored data, writing a + literal byte, and copying a matching string. + + When returning, a "goto inf_leave" is used to update the total counters, + update the check value, and determine whether any progress has been made + during that inflate() call in order to return the proper return code. + Progress is defined as a change in either strm->avail_in or strm->avail_out. + When there is a window, goto inf_leave will update the window with the last + output written. If a goto inf_leave occurs in the middle of decompression + and there is no window currently, goto inf_leave will create one and copy + output to the window for the next call of inflate(). + + In this implementation, the flush parameter of inflate() only affects the + return code (per zlib.h). inflate() always writes as much as possible to + strm->next_out, given the space available and the provided input--the effect + documented in zlib.h of Z_SYNC_FLUSH. Furthermore, inflate() always defers + the allocation of and copying into a sliding window until necessary, which + provides the effect documented in zlib.h for Z_FINISH when the entire input + stream available. So the only thing the flush parameter actually does is: + when flush is set to Z_FINISH, inflate() cannot return Z_OK. Instead it + will return Z_BUF_ERROR if it has not reached the end of the stream. + */ + +int ZEXPORT inflate(strm, flush) +z_streamp strm; +int flush; +{ + struct inflate_state FAR *state; + z_const unsigned char FAR *next; /* next input */ + unsigned char FAR *put; /* next output */ + unsigned have, left; /* available input and output */ + unsigned long hold; /* bit buffer */ + unsigned bits; /* bits in bit buffer */ + unsigned in, out; /* save starting available input and output */ + unsigned copy; /* number of stored or match bytes to copy */ + unsigned char FAR *from; /* where to copy match bytes from */ + code here; /* current decoding table entry */ + code last; /* parent table entry */ + unsigned len; /* length to copy for repeats, bits to drop */ + int ret; /* return code */ +#ifdef GUNZIP + unsigned char hbuf[4]; /* buffer for gzip header crc calculation */ +#endif + static const unsigned short order[19] = /* permutation of code lengths */ + {16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15}; + + if (strm == Z_NULL || strm->state == Z_NULL || strm->next_out == Z_NULL || + (strm->next_in == Z_NULL && strm->avail_in != 0)) + return Z_STREAM_ERROR; + + state = (struct inflate_state FAR *)strm->state; + if (state->mode == TYPE) state->mode = TYPEDO; /* skip check */ + LOAD(); + in = have; + out = left; + ret = Z_OK; + for (;;) + switch (state->mode) { + case HEAD: + if (state->wrap == 0) { + state->mode = TYPEDO; + break; + } + NEEDBITS(16); +#ifdef GUNZIP + if ((state->wrap & 2) && hold == 0x8b1f) { /* gzip header */ + state->check = crc32(0L, Z_NULL, 0); + CRC2(state->check, hold); + INITBITS(); + state->mode = FLAGS; + break; + } + state->flags = 0; /* expect zlib header */ + if (state->head != Z_NULL) + state->head->done = -1; + if (!(state->wrap & 1) || /* check if zlib header allowed */ +#else + if ( +#endif + ((BITS(8) << 8) + (hold >> 8)) % 31) { + strm->msg = (char *)"incorrect header check"; + state->mode = BAD; + break; + } + if (BITS(4) != Z_DEFLATED) { + strm->msg = (char *)"unknown compression method"; + state->mode = BAD; + break; + } + DROPBITS(4); + len = BITS(4) + 8; + if (state->wbits == 0) + state->wbits = len; + else if (len > state->wbits) { + strm->msg = (char *)"invalid window size"; + state->mode = BAD; + break; + } + state->dmax = 1U << len; + Tracev((stderr, "inflate: zlib header ok\n")); + strm->adler = state->check = adler32(0L, Z_NULL, 0); + state->mode = hold & 0x200 ? DICTID : TYPE; + INITBITS(); + break; +#ifdef GUNZIP + case FLAGS: + NEEDBITS(16); + state->flags = (int)(hold); + if ((state->flags & 0xff) != Z_DEFLATED) { + strm->msg = (char *)"unknown compression method"; + state->mode = BAD; + break; + } + if (state->flags & 0xe000) { + strm->msg = (char *)"unknown header flags set"; + state->mode = BAD; + break; + } + if (state->head != Z_NULL) + state->head->text = (int)((hold >> 8) & 1); + if (state->flags & 0x0200) CRC2(state->check, hold); + INITBITS(); + state->mode = TIME; + case TIME: + NEEDBITS(32); + if (state->head != Z_NULL) + state->head->time = hold; + if (state->flags & 0x0200) CRC4(state->check, hold); + INITBITS(); + state->mode = OS; + case OS: + NEEDBITS(16); + if (state->head != Z_NULL) { + state->head->xflags = (int)(hold & 0xff); + state->head->os = (int)(hold >> 8); + } + if (state->flags & 0x0200) CRC2(state->check, hold); + INITBITS(); + state->mode = EXLEN; + case EXLEN: + if (state->flags & 0x0400) { + NEEDBITS(16); + state->length = (unsigned)(hold); + if (state->head != Z_NULL) + state->head->extra_len = (unsigned)hold; + if (state->flags & 0x0200) CRC2(state->check, hold); + INITBITS(); + } + else if (state->head != Z_NULL) + state->head->extra = Z_NULL; + state->mode = EXTRA; + case EXTRA: + if (state->flags & 0x0400) { + copy = state->length; + if (copy > have) copy = have; + if (copy) { + if (state->head != Z_NULL && + state->head->extra != Z_NULL) { + len = state->head->extra_len - state->length; + zmemcpy(state->head->extra + len, next, + len + copy > state->head->extra_max ? + state->head->extra_max - len : copy); + } + if (state->flags & 0x0200) + state->check = crc32(state->check, next, copy); + have -= copy; + next += copy; + state->length -= copy; + } + if (state->length) goto inf_leave; + } + state->length = 0; + state->mode = NAME; + case NAME: + if (state->flags & 0x0800) { + if (have == 0) goto inf_leave; + copy = 0; + do { + len = (unsigned)(next[copy++]); + if (state->head != Z_NULL && + state->head->name != Z_NULL && + state->length < state->head->name_max) + state->head->name[state->length++] = len; + } while (len && copy < have); + if (state->flags & 0x0200) + state->check = crc32(state->check, next, copy); + have -= copy; + next += copy; + if (len) goto inf_leave; + } + else if (state->head != Z_NULL) + state->head->name = Z_NULL; + state->length = 0; + state->mode = COMMENT; + case COMMENT: + if (state->flags & 0x1000) { + if (have == 0) goto inf_leave; + copy = 0; + do { + len = (unsigned)(next[copy++]); + if (state->head != Z_NULL && + state->head->comment != Z_NULL && + state->length < state->head->comm_max) + state->head->comment[state->length++] = len; + } while (len && copy < have); + if (state->flags & 0x0200) + state->check = crc32(state->check, next, copy); + have -= copy; + next += copy; + if (len) goto inf_leave; + } + else if (state->head != Z_NULL) + state->head->comment = Z_NULL; + state->mode = HCRC; + case HCRC: + if (state->flags & 0x0200) { + NEEDBITS(16); + if (hold != (state->check & 0xffff)) { + strm->msg = (char *)"header crc mismatch"; + state->mode = BAD; + break; + } + INITBITS(); + } + if (state->head != Z_NULL) { + state->head->hcrc = (int)((state->flags >> 9) & 1); + state->head->done = 1; + } + strm->adler = state->check = crc32(0L, Z_NULL, 0); + state->mode = TYPE; + break; +#endif + case DICTID: + NEEDBITS(32); + strm->adler = state->check = ZSWAP32(hold); + INITBITS(); + state->mode = DICT; + case DICT: + if (state->havedict == 0) { + RESTORE(); + return Z_NEED_DICT; + } + strm->adler = state->check = adler32(0L, Z_NULL, 0); + state->mode = TYPE; + case TYPE: + if (flush == Z_BLOCK || flush == Z_TREES) goto inf_leave; + case TYPEDO: + if (state->last) { + BYTEBITS(); + state->mode = CHECK; + break; + } + NEEDBITS(3); + state->last = BITS(1); + DROPBITS(1); + switch (BITS(2)) { + case 0: /* stored block */ + Tracev((stderr, "inflate: stored block%s\n", + state->last ? " (last)" : "")); + state->mode = STORED; + break; + case 1: /* fixed block */ + fixedtables(state); + Tracev((stderr, "inflate: fixed codes block%s\n", + state->last ? " (last)" : "")); + state->mode = LEN_; /* decode codes */ + if (flush == Z_TREES) { + DROPBITS(2); + goto inf_leave; + } + break; + case 2: /* dynamic block */ + Tracev((stderr, "inflate: dynamic codes block%s\n", + state->last ? " (last)" : "")); + state->mode = TABLE; + break; + case 3: + strm->msg = (char *)"invalid block type"; + state->mode = BAD; + } + DROPBITS(2); + break; + case STORED: + BYTEBITS(); /* go to byte boundary */ + NEEDBITS(32); + if ((hold & 0xffff) != ((hold >> 16) ^ 0xffff)) { + strm->msg = (char *)"invalid stored block lengths"; + state->mode = BAD; + break; + } + state->length = (unsigned)hold & 0xffff; + Tracev((stderr, "inflate: stored length %u\n", + state->length)); + INITBITS(); + state->mode = COPY_; + if (flush == Z_TREES) goto inf_leave; + case COPY_: + state->mode = COPY; + case COPY: + copy = state->length; + if (copy) { + if (copy > have) copy = have; + if (copy > left) copy = left; + if (copy == 0) goto inf_leave; + zmemcpy(put, next, copy); + have -= copy; + next += copy; + left -= copy; + put += copy; + state->length -= copy; + break; + } + Tracev((stderr, "inflate: stored end\n")); + state->mode = TYPE; + break; + case TABLE: + NEEDBITS(14); + state->nlen = BITS(5) + 257; + DROPBITS(5); + state->ndist = BITS(5) + 1; + DROPBITS(5); + state->ncode = BITS(4) + 4; + DROPBITS(4); +#ifndef PKZIP_BUG_WORKAROUND + if (state->nlen > 286 || state->ndist > 30) { + strm->msg = (char *)"too many length or distance symbols"; + state->mode = BAD; + break; + } +#endif + Tracev((stderr, "inflate: table sizes ok\n")); + state->have = 0; + state->mode = LENLENS; + case LENLENS: + while (state->have < state->ncode) { + NEEDBITS(3); + state->lens[order[state->have++]] = (unsigned short)BITS(3); + DROPBITS(3); + } + while (state->have < 19) + state->lens[order[state->have++]] = 0; + state->next = state->codes; + state->lencode = (const code FAR *)(state->next); + state->lenbits = 7; + ret = inflate_table(CODES, state->lens, 19, &(state->next), + &(state->lenbits), state->work); + if (ret) { + strm->msg = (char *)"invalid code lengths set"; + state->mode = BAD; + break; + } + Tracev((stderr, "inflate: code lengths ok\n")); + state->have = 0; + state->mode = CODELENS; + case CODELENS: + while (state->have < state->nlen + state->ndist) { + for (;;) { + here = state->lencode[BITS(state->lenbits)]; + if ((unsigned)(here.bits) <= bits) break; + PULLBYTE(); + } + if (here.val < 16) { + DROPBITS(here.bits); + state->lens[state->have++] = here.val; + } + else { + if (here.val == 16) { + NEEDBITS(here.bits + 2); + DROPBITS(here.bits); + if (state->have == 0) { + strm->msg = (char *)"invalid bit length repeat"; + state->mode = BAD; + break; + } + len = state->lens[state->have - 1]; + copy = 3 + BITS(2); + DROPBITS(2); + } + else if (here.val == 17) { + NEEDBITS(here.bits + 3); + DROPBITS(here.bits); + len = 0; + copy = 3 + BITS(3); + DROPBITS(3); + } + else { + NEEDBITS(here.bits + 7); + DROPBITS(here.bits); + len = 0; + copy = 11 + BITS(7); + DROPBITS(7); + } + if (state->have + copy > state->nlen + state->ndist) { + strm->msg = (char *)"invalid bit length repeat"; + state->mode = BAD; + break; + } + while (copy--) + state->lens[state->have++] = (unsigned short)len; + } + } + + /* handle error breaks in while */ + if (state->mode == BAD) break; + + /* check for end-of-block code (better have one) */ + if (state->lens[256] == 0) { + strm->msg = (char *)"invalid code -- missing end-of-block"; + state->mode = BAD; + break; + } + + /* build code tables -- note: do not change the lenbits or distbits + values here (9 and 6) without reading the comments in inftrees.h + concerning the ENOUGH constants, which depend on those values */ + state->next = state->codes; + state->lencode = (const code FAR *)(state->next); + state->lenbits = 9; + ret = inflate_table(LENS, state->lens, state->nlen, &(state->next), + &(state->lenbits), state->work); + if (ret) { + strm->msg = (char *)"invalid literal/lengths set"; + state->mode = BAD; + break; + } + state->distcode = (const code FAR *)(state->next); + state->distbits = 6; + ret = inflate_table(DISTS, state->lens + state->nlen, state->ndist, + &(state->next), &(state->distbits), state->work); + if (ret) { + strm->msg = (char *)"invalid distances set"; + state->mode = BAD; + break; + } + Tracev((stderr, "inflate: codes ok\n")); + state->mode = LEN_; + if (flush == Z_TREES) goto inf_leave; + case LEN_: + state->mode = LEN; + case LEN: + if (have >= 6 && left >= 258) { + RESTORE(); + inflate_fast(strm, out); + LOAD(); + if (state->mode == TYPE) + state->back = -1; + break; + } + state->back = 0; + for (;;) { + here = state->lencode[BITS(state->lenbits)]; + if ((unsigned)(here.bits) <= bits) break; + PULLBYTE(); + } + if (here.op && (here.op & 0xf0) == 0) { + last = here; + for (;;) { + here = state->lencode[last.val + + (BITS(last.bits + last.op) >> last.bits)]; + if ((unsigned)(last.bits + here.bits) <= bits) break; + PULLBYTE(); + } + DROPBITS(last.bits); + state->back += last.bits; + } + DROPBITS(here.bits); + state->back += here.bits; + state->length = (unsigned)here.val; + if ((int)(here.op) == 0) { + Tracevv((stderr, here.val >= 0x20 && here.val < 0x7f ? + "inflate: literal '%c'\n" : + "inflate: literal 0x%02x\n", here.val)); + state->mode = LIT; + break; + } + if (here.op & 32) { + Tracevv((stderr, "inflate: end of block\n")); + state->back = -1; + state->mode = TYPE; + break; + } + if (here.op & 64) { + strm->msg = (char *)"invalid literal/length code"; + state->mode = BAD; + break; + } + state->extra = (unsigned)(here.op) & 15; + state->mode = LENEXT; + case LENEXT: + if (state->extra) { + NEEDBITS(state->extra); + state->length += BITS(state->extra); + DROPBITS(state->extra); + state->back += state->extra; + } + Tracevv((stderr, "inflate: length %u\n", state->length)); + state->was = state->length; + state->mode = DIST; + case DIST: + for (;;) { + here = state->distcode[BITS(state->distbits)]; + if ((unsigned)(here.bits) <= bits) break; + PULLBYTE(); + } + if ((here.op & 0xf0) == 0) { + last = here; + for (;;) { + here = state->distcode[last.val + + (BITS(last.bits + last.op) >> last.bits)]; + if ((unsigned)(last.bits + here.bits) <= bits) break; + PULLBYTE(); + } + DROPBITS(last.bits); + state->back += last.bits; + } + DROPBITS(here.bits); + state->back += here.bits; + if (here.op & 64) { + strm->msg = (char *)"invalid distance code"; + state->mode = BAD; + break; + } + state->offset = (unsigned)here.val; + state->extra = (unsigned)(here.op) & 15; + state->mode = DISTEXT; + case DISTEXT: + if (state->extra) { + NEEDBITS(state->extra); + state->offset += BITS(state->extra); + DROPBITS(state->extra); + state->back += state->extra; + } +#ifdef INFLATE_STRICT + if (state->offset > state->dmax) { + strm->msg = (char *)"invalid distance too far back"; + state->mode = BAD; + break; + } +#endif + Tracevv((stderr, "inflate: distance %u\n", state->offset)); + state->mode = MATCH; + case MATCH: + if (left == 0) goto inf_leave; + copy = out - left; + if (state->offset > copy) { /* copy from window */ + copy = state->offset - copy; + if (copy > state->whave) { + if (state->sane) { + strm->msg = (char *)"invalid distance too far back"; + state->mode = BAD; + break; + } +#ifdef INFLATE_ALLOW_INVALID_DISTANCE_TOOFAR_ARRR + Trace((stderr, "inflate.c too far\n")); + copy -= state->whave; + if (copy > state->length) copy = state->length; + if (copy > left) copy = left; + left -= copy; + state->length -= copy; + do { + *put++ = 0; + } while (--copy); + if (state->length == 0) state->mode = LEN; + break; +#endif + } + if (copy > state->wnext) { + copy -= state->wnext; + from = state->window + (state->wsize - copy); + } + else + from = state->window + (state->wnext - copy); + if (copy > state->length) copy = state->length; + } + else { /* copy from output */ + from = put - state->offset; + copy = state->length; + } + if (copy > left) copy = left; + left -= copy; + state->length -= copy; + do { + *put++ = *from++; + } while (--copy); + if (state->length == 0) state->mode = LEN; + break; + case LIT: + if (left == 0) goto inf_leave; + *put++ = (unsigned char)(state->length); + left--; + state->mode = LEN; + break; + case CHECK: + if (state->wrap) { + NEEDBITS(32); + out -= left; + strm->total_out += out; + state->total += out; + if (out) + strm->adler = state->check = + UPDATE(state->check, put - out, out); + out = left; + if (( +#ifdef GUNZIP + state->flags ? hold : +#endif + ZSWAP32(hold)) != state->check) { + strm->msg = (char *)"incorrect data check"; + state->mode = BAD; + break; + } + INITBITS(); + Tracev((stderr, "inflate: check matches trailer\n")); + } +#ifdef GUNZIP + state->mode = LENGTH; + case LENGTH: + if (state->wrap && state->flags) { + NEEDBITS(32); + if (hold != (state->total & 0xffffffffUL)) { + strm->msg = (char *)"incorrect length check"; + state->mode = BAD; + break; + } + INITBITS(); + Tracev((stderr, "inflate: length matches trailer\n")); + } +#endif + state->mode = DONE; + case DONE: + ret = Z_STREAM_END; + goto inf_leave; + case BAD: + ret = Z_DATA_ERROR; + goto inf_leave; + case MEM: + return Z_MEM_ERROR; + case SYNC: + default: + return Z_STREAM_ERROR; + } + + /* + Return from inflate(), updating the total counts and the check value. + If there was no progress during the inflate() call, return a buffer + error. Call updatewindow() to create and/or update the window state. + Note: a memory error from inflate() is non-recoverable. + */ + inf_leave: + RESTORE(); + if (state->wsize || (out != strm->avail_out && state->mode < BAD && + (state->mode < CHECK || flush != Z_FINISH))) + if (updatewindow(strm, strm->next_out, out - strm->avail_out)) { + state->mode = MEM; + return Z_MEM_ERROR; + } + in -= strm->avail_in; + out -= strm->avail_out; + strm->total_in += in; + strm->total_out += out; + state->total += out; + if (state->wrap && out) + strm->adler = state->check = + UPDATE(state->check, strm->next_out - out, out); + strm->data_type = state->bits + (state->last ? 64 : 0) + + (state->mode == TYPE ? 128 : 0) + + (state->mode == LEN_ || state->mode == COPY_ ? 256 : 0); + if (((in == 0 && out == 0) || flush == Z_FINISH) && ret == Z_OK) + ret = Z_BUF_ERROR; + return ret; +} + +int ZEXPORT inflateEnd(strm) +z_streamp strm; +{ + struct inflate_state FAR *state; + if (strm == Z_NULL || strm->state == Z_NULL || strm->zfree == (free_func)0) + return Z_STREAM_ERROR; + state = (struct inflate_state FAR *)strm->state; + if (state->window != Z_NULL) ZFREE(strm, state->window); + ZFREE(strm, strm->state); + strm->state = Z_NULL; + Tracev((stderr, "inflate: end\n")); + return Z_OK; +} + +int ZEXPORT inflateGetDictionary(strm, dictionary, dictLength) +z_streamp strm; +Bytef *dictionary; +uInt *dictLength; +{ + struct inflate_state FAR *state; + + /* check state */ + if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; + state = (struct inflate_state FAR *)strm->state; + + /* copy dictionary */ + if (state->whave && dictionary != Z_NULL) { + zmemcpy(dictionary, state->window + state->wnext, + state->whave - state->wnext); + zmemcpy(dictionary + state->whave - state->wnext, + state->window, state->wnext); + } + if (dictLength != Z_NULL) + *dictLength = state->whave; + return Z_OK; +} + +int ZEXPORT inflateSetDictionary(strm, dictionary, dictLength) +z_streamp strm; +const Bytef *dictionary; +uInt dictLength; +{ + struct inflate_state FAR *state; + unsigned long dictid; + int ret; + + /* check state */ + if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; + state = (struct inflate_state FAR *)strm->state; + if (state->wrap != 0 && state->mode != DICT) + return Z_STREAM_ERROR; + + /* check for correct dictionary identifier */ + if (state->mode == DICT) { + dictid = adler32(0L, Z_NULL, 0); + dictid = adler32(dictid, dictionary, dictLength); + if (dictid != state->check) + return Z_DATA_ERROR; + } + + /* copy dictionary to window using updatewindow(), which will amend the + existing dictionary if appropriate */ + ret = updatewindow(strm, dictionary + dictLength, dictLength); + if (ret) { + state->mode = MEM; + return Z_MEM_ERROR; + } + state->havedict = 1; + Tracev((stderr, "inflate: dictionary set\n")); + return Z_OK; +} + +int ZEXPORT inflateGetHeader(strm, head) +z_streamp strm; +gz_headerp head; +{ + struct inflate_state FAR *state; + + /* check state */ + if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; + state = (struct inflate_state FAR *)strm->state; + if ((state->wrap & 2) == 0) return Z_STREAM_ERROR; + + /* save header structure */ + state->head = head; + head->done = 0; + return Z_OK; +} + +/* + Search buf[0..len-1] for the pattern: 0, 0, 0xff, 0xff. Return when found + or when out of input. When called, *have is the number of pattern bytes + found in order so far, in 0..3. On return *have is updated to the new + state. If on return *have equals four, then the pattern was found and the + return value is how many bytes were read including the last byte of the + pattern. If *have is less than four, then the pattern has not been found + yet and the return value is len. In the latter case, syncsearch() can be + called again with more data and the *have state. *have is initialized to + zero for the first call. + */ +local unsigned syncsearch(have, buf, len) +unsigned FAR *have; +const unsigned char FAR *buf; +unsigned len; +{ + unsigned got; + unsigned next; + + got = *have; + next = 0; + while (next < len && got < 4) { + if ((int)(buf[next]) == (got < 2 ? 0 : 0xff)) + got++; + else if (buf[next]) + got = 0; + else + got = 4 - got; + next++; + } + *have = got; + return next; +} + +int ZEXPORT inflateSync(strm) +z_streamp strm; +{ + unsigned len; /* number of bytes to look at or looked at */ + unsigned long in, out; /* temporary to save total_in and total_out */ + unsigned char buf[4]; /* to restore bit buffer to byte string */ + struct inflate_state FAR *state; + + /* check parameters */ + if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; + state = (struct inflate_state FAR *)strm->state; + if (strm->avail_in == 0 && state->bits < 8) return Z_BUF_ERROR; + + /* if first time, start search in bit buffer */ + if (state->mode != SYNC) { + state->mode = SYNC; + state->hold <<= state->bits & 7; + state->bits -= state->bits & 7; + len = 0; + while (state->bits >= 8) { + buf[len++] = (unsigned char)(state->hold); + state->hold >>= 8; + state->bits -= 8; + } + state->have = 0; + syncsearch(&(state->have), buf, len); + } + + /* search available input */ + len = syncsearch(&(state->have), strm->next_in, strm->avail_in); + strm->avail_in -= len; + strm->next_in += len; + strm->total_in += len; + + /* return no joy or set up to restart inflate() on a new block */ + if (state->have != 4) return Z_DATA_ERROR; + in = strm->total_in; out = strm->total_out; + inflateReset(strm); + strm->total_in = in; strm->total_out = out; + state->mode = TYPE; + return Z_OK; +} + +/* + Returns true if inflate is currently at the end of a block generated by + Z_SYNC_FLUSH or Z_FULL_FLUSH. This function is used by one PPP + implementation to provide an additional safety check. PPP uses + Z_SYNC_FLUSH but removes the length bytes of the resulting empty stored + block. When decompressing, PPP checks that at the end of input packet, + inflate is waiting for these length bytes. + */ +int ZEXPORT inflateSyncPoint(strm) +z_streamp strm; +{ + struct inflate_state FAR *state; + + if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; + state = (struct inflate_state FAR *)strm->state; + return state->mode == STORED && state->bits == 0; +} + +int ZEXPORT inflateCopy(dest, source) +z_streamp dest; +z_streamp source; +{ + struct inflate_state FAR *state; + struct inflate_state FAR *copy; + unsigned char FAR *window; + unsigned wsize; + + /* check input */ + if (dest == Z_NULL || source == Z_NULL || source->state == Z_NULL || + source->zalloc == (alloc_func)0 || source->zfree == (free_func)0) + return Z_STREAM_ERROR; + state = (struct inflate_state FAR *)source->state; + + /* allocate space */ + copy = (struct inflate_state FAR *) + ZALLOC(source, 1, sizeof(struct inflate_state)); + if (copy == Z_NULL) return Z_MEM_ERROR; + window = Z_NULL; + if (state->window != Z_NULL) { + window = (unsigned char FAR *) + ZALLOC(source, 1U << state->wbits, sizeof(unsigned char)); + if (window == Z_NULL) { + ZFREE(source, copy); + return Z_MEM_ERROR; + } + } + + /* copy state */ + zmemcpy((voidpf)dest, (voidpf)source, sizeof(z_stream)); + zmemcpy((voidpf)copy, (voidpf)state, sizeof(struct inflate_state)); + if (state->lencode >= state->codes && + state->lencode <= state->codes + ENOUGH - 1) { + copy->lencode = copy->codes + (state->lencode - state->codes); + copy->distcode = copy->codes + (state->distcode - state->codes); + } + copy->next = copy->codes + (state->next - state->codes); + if (window != Z_NULL) { + wsize = 1U << state->wbits; + zmemcpy(window, state->window, wsize); + } + copy->window = window; + dest->state = (struct internal_state FAR *)copy; + return Z_OK; +} + +int ZEXPORT inflateUndermine(strm, subvert) +z_streamp strm; +int subvert; +{ + struct inflate_state FAR *state; + + if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; + state = (struct inflate_state FAR *)strm->state; + state->sane = !subvert; +#ifdef INFLATE_ALLOW_INVALID_DISTANCE_TOOFAR_ARRR + return Z_OK; +#else + state->sane = 1; + return Z_DATA_ERROR; +#endif +} + +long ZEXPORT inflateMark(strm) +z_streamp strm; +{ + struct inflate_state FAR *state; + + if (strm == Z_NULL || strm->state == Z_NULL) return -1L << 16; + state = (struct inflate_state FAR *)strm->state; + return ((long)(state->back) << 16) + + (state->mode == COPY ? state->length : + (state->mode == MATCH ? state->was - state->length : 0)); +} diff --git a/software/scsi2sd-util/zlib-1.2.8/inflate.h b/software/scsi2sd-util/zlib-1.2.8/inflate.h new file mode 100644 index 0000000..95f4986 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/inflate.h @@ -0,0 +1,122 @@ +/* inflate.h -- internal inflate state definition + * Copyright (C) 1995-2009 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* WARNING: this file should *not* be used by applications. It is + part of the implementation of the compression library and is + subject to change. Applications should only use zlib.h. + */ + +/* define NO_GZIP when compiling if you want to disable gzip header and + trailer decoding by inflate(). NO_GZIP would be used to avoid linking in + the crc code when it is not needed. For shared libraries, gzip decoding + should be left enabled. */ +#ifndef NO_GZIP +# define GUNZIP +#endif + +/* Possible inflate modes between inflate() calls */ +typedef enum { + HEAD, /* i: waiting for magic header */ + FLAGS, /* i: waiting for method and flags (gzip) */ + TIME, /* i: waiting for modification time (gzip) */ + OS, /* i: waiting for extra flags and operating system (gzip) */ + EXLEN, /* i: waiting for extra length (gzip) */ + EXTRA, /* i: waiting for extra bytes (gzip) */ + NAME, /* i: waiting for end of file name (gzip) */ + COMMENT, /* i: waiting for end of comment (gzip) */ + HCRC, /* i: waiting for header crc (gzip) */ + DICTID, /* i: waiting for dictionary check value */ + DICT, /* waiting for inflateSetDictionary() call */ + TYPE, /* i: waiting for type bits, including last-flag bit */ + TYPEDO, /* i: same, but skip check to exit inflate on new block */ + STORED, /* i: waiting for stored size (length and complement) */ + COPY_, /* i/o: same as COPY below, but only first time in */ + COPY, /* i/o: waiting for input or output to copy stored block */ + TABLE, /* i: waiting for dynamic block table lengths */ + LENLENS, /* i: waiting for code length code lengths */ + CODELENS, /* i: waiting for length/lit and distance code lengths */ + LEN_, /* i: same as LEN below, but only first time in */ + LEN, /* i: waiting for length/lit/eob code */ + LENEXT, /* i: waiting for length extra bits */ + DIST, /* i: waiting for distance code */ + DISTEXT, /* i: waiting for distance extra bits */ + MATCH, /* o: waiting for output space to copy string */ + LIT, /* o: waiting for output space to write literal */ + CHECK, /* i: waiting for 32-bit check value */ + LENGTH, /* i: waiting for 32-bit length (gzip) */ + DONE, /* finished check, done -- remain here until reset */ + BAD, /* got a data error -- remain here until reset */ + MEM, /* got an inflate() memory error -- remain here until reset */ + SYNC /* looking for synchronization bytes to restart inflate() */ +} inflate_mode; + +/* + State transitions between above modes - + + (most modes can go to BAD or MEM on error -- not shown for clarity) + + Process header: + HEAD -> (gzip) or (zlib) or (raw) + (gzip) -> FLAGS -> TIME -> OS -> EXLEN -> EXTRA -> NAME -> COMMENT -> + HCRC -> TYPE + (zlib) -> DICTID or TYPE + DICTID -> DICT -> TYPE + (raw) -> TYPEDO + Read deflate blocks: + TYPE -> TYPEDO -> STORED or TABLE or LEN_ or CHECK + STORED -> COPY_ -> COPY -> TYPE + TABLE -> LENLENS -> CODELENS -> LEN_ + LEN_ -> LEN + Read deflate codes in fixed or dynamic block: + LEN -> LENEXT or LIT or TYPE + LENEXT -> DIST -> DISTEXT -> MATCH -> LEN + LIT -> LEN + Process trailer: + CHECK -> LENGTH -> DONE + */ + +/* state maintained between inflate() calls. Approximately 10K bytes. */ +struct inflate_state { + inflate_mode mode; /* current inflate mode */ + int last; /* true if processing last block */ + int wrap; /* bit 0 true for zlib, bit 1 true for gzip */ + int havedict; /* true if dictionary provided */ + int flags; /* gzip header method and flags (0 if zlib) */ + unsigned dmax; /* zlib header max distance (INFLATE_STRICT) */ + unsigned long check; /* protected copy of check value */ + unsigned long total; /* protected copy of output count */ + gz_headerp head; /* where to save gzip header information */ + /* sliding window */ + unsigned wbits; /* log base 2 of requested window size */ + unsigned wsize; /* window size or zero if not using window */ + unsigned whave; /* valid bytes in the window */ + unsigned wnext; /* window write index */ + unsigned char FAR *window; /* allocated sliding window, if needed */ + /* bit accumulator */ + unsigned long hold; /* input bit accumulator */ + unsigned bits; /* number of bits in "in" */ + /* for string and stored block copying */ + unsigned length; /* literal or length of data to copy */ + unsigned offset; /* distance back to copy string from */ + /* for table and code decoding */ + unsigned extra; /* extra bits needed */ + /* fixed and dynamic code tables */ + code const FAR *lencode; /* starting table for length/literal codes */ + code const FAR *distcode; /* starting table for distance codes */ + unsigned lenbits; /* index bits for lencode */ + unsigned distbits; /* index bits for distcode */ + /* dynamic table building */ + unsigned ncode; /* number of code length code lengths */ + unsigned nlen; /* number of length code lengths */ + unsigned ndist; /* number of distance code lengths */ + unsigned have; /* number of code lengths in lens[] */ + code FAR *next; /* next available space in codes[] */ + unsigned short lens[320]; /* temporary storage for code lengths */ + unsigned short work[288]; /* work area for code table building */ + code codes[ENOUGH]; /* space for code tables */ + int sane; /* if false, allow invalid distance too far */ + int back; /* bits back of last unprocessed length/lit */ + unsigned was; /* initial length of match */ +}; diff --git a/software/scsi2sd-util/zlib-1.2.8/inftrees.c b/software/scsi2sd-util/zlib-1.2.8/inftrees.c new file mode 100644 index 0000000..44d89cf --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/inftrees.c @@ -0,0 +1,306 @@ +/* inftrees.c -- generate Huffman trees for efficient decoding + * Copyright (C) 1995-2013 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +#include "zutil.h" +#include "inftrees.h" + +#define MAXBITS 15 + +const char inflate_copyright[] = + " inflate 1.2.8 Copyright 1995-2013 Mark Adler "; +/* + If you use the zlib library in a product, an acknowledgment is welcome + in the documentation of your product. If for some reason you cannot + include such an acknowledgment, I would appreciate that you keep this + copyright string in the executable of your product. + */ + +/* + Build a set of tables to decode the provided canonical Huffman code. + The code lengths are lens[0..codes-1]. The result starts at *table, + whose indices are 0..2^bits-1. work is a writable array of at least + lens shorts, which is used as a work area. type is the type of code + to be generated, CODES, LENS, or DISTS. On return, zero is success, + -1 is an invalid code, and +1 means that ENOUGH isn't enough. table + on return points to the next available entry's address. bits is the + requested root table index bits, and on return it is the actual root + table index bits. It will differ if the request is greater than the + longest code or if it is less than the shortest code. + */ +int ZLIB_INTERNAL inflate_table(type, lens, codes, table, bits, work) +codetype type; +unsigned short FAR *lens; +unsigned codes; +code FAR * FAR *table; +unsigned FAR *bits; +unsigned short FAR *work; +{ + unsigned len; /* a code's length in bits */ + unsigned sym; /* index of code symbols */ + unsigned min, max; /* minimum and maximum code lengths */ + unsigned root; /* number of index bits for root table */ + unsigned curr; /* number of index bits for current table */ + unsigned drop; /* code bits to drop for sub-table */ + int left; /* number of prefix codes available */ + unsigned used; /* code entries in table used */ + unsigned huff; /* Huffman code */ + unsigned incr; /* for incrementing code, index */ + unsigned fill; /* index for replicating entries */ + unsigned low; /* low bits for current root entry */ + unsigned mask; /* mask for low root bits */ + code here; /* table entry for duplication */ + code FAR *next; /* next available space in table */ + const unsigned short FAR *base; /* base value table to use */ + const unsigned short FAR *extra; /* extra bits table to use */ + int end; /* use base and extra for symbol > end */ + unsigned short count[MAXBITS+1]; /* number of codes of each length */ + unsigned short offs[MAXBITS+1]; /* offsets in table for each length */ + static const unsigned short lbase[31] = { /* Length codes 257..285 base */ + 3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 15, 17, 19, 23, 27, 31, + 35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0}; + static const unsigned short lext[31] = { /* Length codes 257..285 extra */ + 16, 16, 16, 16, 16, 16, 16, 16, 17, 17, 17, 17, 18, 18, 18, 18, + 19, 19, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 16, 72, 78}; + static const unsigned short dbase[32] = { /* Distance codes 0..29 base */ + 1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193, + 257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145, + 8193, 12289, 16385, 24577, 0, 0}; + static const unsigned short dext[32] = { /* Distance codes 0..29 extra */ + 16, 16, 16, 16, 17, 17, 18, 18, 19, 19, 20, 20, 21, 21, 22, 22, + 23, 23, 24, 24, 25, 25, 26, 26, 27, 27, + 28, 28, 29, 29, 64, 64}; + + /* + Process a set of code lengths to create a canonical Huffman code. The + code lengths are lens[0..codes-1]. Each length corresponds to the + symbols 0..codes-1. The Huffman code is generated by first sorting the + symbols by length from short to long, and retaining the symbol order + for codes with equal lengths. Then the code starts with all zero bits + for the first code of the shortest length, and the codes are integer + increments for the same length, and zeros are appended as the length + increases. For the deflate format, these bits are stored backwards + from their more natural integer increment ordering, and so when the + decoding tables are built in the large loop below, the integer codes + are incremented backwards. + + This routine assumes, but does not check, that all of the entries in + lens[] are in the range 0..MAXBITS. The caller must assure this. + 1..MAXBITS is interpreted as that code length. zero means that that + symbol does not occur in this code. + + The codes are sorted by computing a count of codes for each length, + creating from that a table of starting indices for each length in the + sorted table, and then entering the symbols in order in the sorted + table. The sorted table is work[], with that space being provided by + the caller. + + The length counts are used for other purposes as well, i.e. finding + the minimum and maximum length codes, determining if there are any + codes at all, checking for a valid set of lengths, and looking ahead + at length counts to determine sub-table sizes when building the + decoding tables. + */ + + /* accumulate lengths for codes (assumes lens[] all in 0..MAXBITS) */ + for (len = 0; len <= MAXBITS; len++) + count[len] = 0; + for (sym = 0; sym < codes; sym++) + count[lens[sym]]++; + + /* bound code lengths, force root to be within code lengths */ + root = *bits; + for (max = MAXBITS; max >= 1; max--) + if (count[max] != 0) break; + if (root > max) root = max; + if (max == 0) { /* no symbols to code at all */ + here.op = (unsigned char)64; /* invalid code marker */ + here.bits = (unsigned char)1; + here.val = (unsigned short)0; + *(*table)++ = here; /* make a table to force an error */ + *(*table)++ = here; + *bits = 1; + return 0; /* no symbols, but wait for decoding to report error */ + } + for (min = 1; min < max; min++) + if (count[min] != 0) break; + if (root < min) root = min; + + /* check for an over-subscribed or incomplete set of lengths */ + left = 1; + for (len = 1; len <= MAXBITS; len++) { + left <<= 1; + left -= count[len]; + if (left < 0) return -1; /* over-subscribed */ + } + if (left > 0 && (type == CODES || max != 1)) + return -1; /* incomplete set */ + + /* generate offsets into symbol table for each length for sorting */ + offs[1] = 0; + for (len = 1; len < MAXBITS; len++) + offs[len + 1] = offs[len] + count[len]; + + /* sort symbols by length, by symbol order within each length */ + for (sym = 0; sym < codes; sym++) + if (lens[sym] != 0) work[offs[lens[sym]]++] = (unsigned short)sym; + + /* + Create and fill in decoding tables. In this loop, the table being + filled is at next and has curr index bits. The code being used is huff + with length len. That code is converted to an index by dropping drop + bits off of the bottom. For codes where len is less than drop + curr, + those top drop + curr - len bits are incremented through all values to + fill the table with replicated entries. + + root is the number of index bits for the root table. When len exceeds + root, sub-tables are created pointed to by the root entry with an index + of the low root bits of huff. This is saved in low to check for when a + new sub-table should be started. drop is zero when the root table is + being filled, and drop is root when sub-tables are being filled. + + When a new sub-table is needed, it is necessary to look ahead in the + code lengths to determine what size sub-table is needed. The length + counts are used for this, and so count[] is decremented as codes are + entered in the tables. + + used keeps track of how many table entries have been allocated from the + provided *table space. It is checked for LENS and DIST tables against + the constants ENOUGH_LENS and ENOUGH_DISTS to guard against changes in + the initial root table size constants. See the comments in inftrees.h + for more information. + + sym increments through all symbols, and the loop terminates when + all codes of length max, i.e. all codes, have been processed. This + routine permits incomplete codes, so another loop after this one fills + in the rest of the decoding tables with invalid code markers. + */ + + /* set up for code type */ + switch (type) { + case CODES: + base = extra = work; /* dummy value--not used */ + end = 19; + break; + case LENS: + base = lbase; + base -= 257; + extra = lext; + extra -= 257; + end = 256; + break; + default: /* DISTS */ + base = dbase; + extra = dext; + end = -1; + } + + /* initialize state for loop */ + huff = 0; /* starting code */ + sym = 0; /* starting code symbol */ + len = min; /* starting code length */ + next = *table; /* current table to fill in */ + curr = root; /* current table index bits */ + drop = 0; /* current bits to drop from code for index */ + low = (unsigned)(-1); /* trigger new sub-table when len > root */ + used = 1U << root; /* use root table entries */ + mask = used - 1; /* mask for comparing low */ + + /* check available table space */ + if ((type == LENS && used > ENOUGH_LENS) || + (type == DISTS && used > ENOUGH_DISTS)) + return 1; + + /* process all codes and make table entries */ + for (;;) { + /* create table entry */ + here.bits = (unsigned char)(len - drop); + if ((int)(work[sym]) < end) { + here.op = (unsigned char)0; + here.val = work[sym]; + } + else if ((int)(work[sym]) > end) { + here.op = (unsigned char)(extra[work[sym]]); + here.val = base[work[sym]]; + } + else { + here.op = (unsigned char)(32 + 64); /* end of block */ + here.val = 0; + } + + /* replicate for those indices with low len bits equal to huff */ + incr = 1U << (len - drop); + fill = 1U << curr; + min = fill; /* save offset to next table */ + do { + fill -= incr; + next[(huff >> drop) + fill] = here; + } while (fill != 0); + + /* backwards increment the len-bit code huff */ + incr = 1U << (len - 1); + while (huff & incr) + incr >>= 1; + if (incr != 0) { + huff &= incr - 1; + huff += incr; + } + else + huff = 0; + + /* go to next symbol, update count, len */ + sym++; + if (--(count[len]) == 0) { + if (len == max) break; + len = lens[work[sym]]; + } + + /* create new sub-table if needed */ + if (len > root && (huff & mask) != low) { + /* if first time, transition to sub-tables */ + if (drop == 0) + drop = root; + + /* increment past last table */ + next += min; /* here min is 1 << curr */ + + /* determine length of next table */ + curr = len - drop; + left = (int)(1 << curr); + while (curr + drop < max) { + left -= count[curr + drop]; + if (left <= 0) break; + curr++; + left <<= 1; + } + + /* check for enough space */ + used += 1U << curr; + if ((type == LENS && used > ENOUGH_LENS) || + (type == DISTS && used > ENOUGH_DISTS)) + return 1; + + /* point entry in root table to sub-table */ + low = huff & mask; + (*table)[low].op = (unsigned char)curr; + (*table)[low].bits = (unsigned char)root; + (*table)[low].val = (unsigned short)(next - *table); + } + } + + /* fill in remaining table entry if code is incomplete (guaranteed to have + at most one remaining entry, since if the code is incomplete, the + maximum code length that was allowed to get this far is one bit) */ + if (huff != 0) { + here.op = (unsigned char)64; /* invalid code marker */ + here.bits = (unsigned char)(len - drop); + here.val = (unsigned short)0; + next[huff] = here; + } + + /* set return parameters */ + *table += used; + *bits = root; + return 0; +} diff --git a/software/scsi2sd-util/zlib-1.2.8/inftrees.h b/software/scsi2sd-util/zlib-1.2.8/inftrees.h new file mode 100644 index 0000000..baa53a0 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/inftrees.h @@ -0,0 +1,62 @@ +/* inftrees.h -- header to use inftrees.c + * Copyright (C) 1995-2005, 2010 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* WARNING: this file should *not* be used by applications. It is + part of the implementation of the compression library and is + subject to change. Applications should only use zlib.h. + */ + +/* Structure for decoding tables. Each entry provides either the + information needed to do the operation requested by the code that + indexed that table entry, or it provides a pointer to another + table that indexes more bits of the code. op indicates whether + the entry is a pointer to another table, a literal, a length or + distance, an end-of-block, or an invalid code. For a table + pointer, the low four bits of op is the number of index bits of + that table. For a length or distance, the low four bits of op + is the number of extra bits to get after the code. bits is + the number of bits in this code or part of the code to drop off + of the bit buffer. val is the actual byte to output in the case + of a literal, the base length or distance, or the offset from + the current table to the next table. Each entry is four bytes. */ +typedef struct { + unsigned char op; /* operation, extra bits, table bits */ + unsigned char bits; /* bits in this part of the code */ + unsigned short val; /* offset in table or code value */ +} code; + +/* op values as set by inflate_table(): + 00000000 - literal + 0000tttt - table link, tttt != 0 is the number of table index bits + 0001eeee - length or distance, eeee is the number of extra bits + 01100000 - end of block + 01000000 - invalid code + */ + +/* Maximum size of the dynamic table. The maximum number of code structures is + 1444, which is the sum of 852 for literal/length codes and 592 for distance + codes. These values were found by exhaustive searches using the program + examples/enough.c found in the zlib distribtution. The arguments to that + program are the number of symbols, the initial root table size, and the + maximum bit length of a code. "enough 286 9 15" for literal/length codes + returns returns 852, and "enough 30 6 15" for distance codes returns 592. + The initial root table size (9 or 6) is found in the fifth argument of the + inflate_table() calls in inflate.c and infback.c. If the root table size is + changed, then these maximum sizes would be need to be recalculated and + updated. */ +#define ENOUGH_LENS 852 +#define ENOUGH_DISTS 592 +#define ENOUGH (ENOUGH_LENS+ENOUGH_DISTS) + +/* Type of code to build for inflate_table() */ +typedef enum { + CODES, + LENS, + DISTS +} codetype; + +int ZLIB_INTERNAL inflate_table OF((codetype type, unsigned short FAR *lens, + unsigned codes, code FAR * FAR *table, + unsigned FAR *bits, unsigned short FAR *work)); diff --git a/software/scsi2sd-util/zlib-1.2.8/make_vms.com b/software/scsi2sd-util/zlib-1.2.8/make_vms.com new file mode 100644 index 0000000..65e9d0c --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/make_vms.com @@ -0,0 +1,867 @@ +$! make libz under VMS written by +$! Martin P.J. Zinser +$! +$! In case of problems with the install you might contact me at +$! zinser@zinser.no-ip.info(preferred) or +$! martin.zinser@eurexchange.com (work) +$! +$! Make procedure history for Zlib +$! +$!------------------------------------------------------------------------------ +$! Version history +$! 0.01 20060120 First version to receive a number +$! 0.02 20061008 Adapt to new Makefile.in +$! 0.03 20091224 Add support for large file check +$! 0.04 20100110 Add new gzclose, gzlib, gzread, gzwrite +$! 0.05 20100221 Exchange zlibdefs.h by zconf.h.in +$! 0.06 20120111 Fix missing amiss_err, update zconf_h.in, fix new exmples +$! subdir path, update module search in makefile.in +$! 0.07 20120115 Triggered by work done by Alexey Chupahin completly redesigned +$! shared image creation +$! 0.08 20120219 Make it work on VAX again, pre-load missing symbols to shared +$! image +$! 0.09 20120305 SMS. P1 sets builder ("MMK", "MMS", " " (built-in)). +$! "" -> automatic, preference: MMK, MMS, built-in. +$! +$ on error then goto err_exit +$! +$ true = 1 +$ false = 0 +$ tmpnam = "temp_" + f$getjpi("","pid") +$ tt = tmpnam + ".txt" +$ tc = tmpnam + ".c" +$ th = tmpnam + ".h" +$ define/nolog tconfig 'th' +$ its_decc = false +$ its_vaxc = false +$ its_gnuc = false +$ s_case = False +$! +$! Setup variables holding "config" information +$! +$ Make = "''p1'" +$ name = "Zlib" +$ version = "?.?.?" +$ v_string = "ZLIB_VERSION" +$ v_file = "zlib.h" +$ ccopt = "/include = []" +$ lopts = "" +$ dnsrl = "" +$ aconf_in_file = "zconf.h.in#zconf.h_in#zconf_h.in" +$ conf_check_string = "" +$ linkonly = false +$ optfile = name + ".opt" +$ mapfile = name + ".map" +$ libdefs = "" +$ vax = f$getsyi("HW_MODEL").lt.1024 +$ axp = f$getsyi("HW_MODEL").ge.1024 .and. f$getsyi("HW_MODEL").lt.4096 +$ ia64 = f$getsyi("HW_MODEL").ge.4096 +$! +$! 2012-03-05 SMS. +$! Why is this needed? And if it is needed, why not simply ".not. vax"? +$! +$!!! if axp .or. ia64 then set proc/parse=extended +$! +$ whoami = f$parse(f$environment("Procedure"),,,,"NO_CONCEAL") +$ mydef = F$parse(whoami,,,"DEVICE") +$ mydir = f$parse(whoami,,,"DIRECTORY") - "][" +$ myproc = f$parse(whoami,,,"Name") + f$parse(whoami,,,"type") +$! +$! Check for MMK/MMS +$! +$ if (Make .eqs. "") +$ then +$ If F$Search ("Sys$System:MMS.EXE") .nes. "" Then Make = "MMS" +$ If F$Type (MMK) .eqs. "STRING" Then Make = "MMK" +$ else +$ Make = f$edit( Make, "trim") +$ endif +$! +$ gosub find_version +$! +$ open/write topt tmp.opt +$ open/write optf 'optfile' +$! +$ gosub check_opts +$! +$! Look for the compiler used +$! +$ gosub check_compiler +$ close topt +$ close optf +$! +$ if its_decc +$ then +$ ccopt = "/prefix=all" + ccopt +$ if f$trnlnm("SYS") .eqs. "" +$ then +$ if axp +$ then +$ define sys sys$library: +$ else +$ ccopt = "/decc" + ccopt +$ define sys decc$library_include: +$ endif +$ endif +$! +$! 2012-03-05 SMS. +$! Why /NAMES = AS_IS? Why not simply ".not. vax"? And why not on VAX? +$! +$ if axp .or. ia64 +$ then +$ ccopt = ccopt + "/name=as_is/opt=(inline=speed)" +$ s_case = true +$ endif +$ endif +$ if its_vaxc .or. its_gnuc +$ then +$ if f$trnlnm("SYS").eqs."" then define sys sys$library: +$ endif +$! +$! Build a fake configure input header +$! +$ open/write conf_hin config.hin +$ write conf_hin "#undef _LARGEFILE64_SOURCE" +$ close conf_hin +$! +$! +$ i = 0 +$FIND_ACONF: +$ fname = f$element(i,"#",aconf_in_file) +$ if fname .eqs. "#" then goto AMISS_ERR +$ if f$search(fname) .eqs. "" +$ then +$ i = i + 1 +$ goto find_aconf +$ endif +$ open/read/err=aconf_err aconf_in 'fname' +$ open/write aconf zconf.h +$ACONF_LOOP: +$ read/end_of_file=aconf_exit aconf_in line +$ work = f$edit(line, "compress,trim") +$ if f$extract(0,6,work) .nes. "#undef" +$ then +$ if f$extract(0,12,work) .nes. "#cmakedefine" +$ then +$ write aconf line +$ endif +$ else +$ cdef = f$element(1," ",work) +$ gosub check_config +$ endif +$ goto aconf_loop +$ACONF_EXIT: +$ write aconf "" +$ write aconf "/* VMS specifics added by make_vms.com: */" +$ write aconf "#define VMS 1" +$ write aconf "#include " +$ write aconf "#include " +$ write aconf "#ifdef _LARGEFILE" +$ write aconf "# define off64_t __off64_t" +$ write aconf "# define fopen64 fopen" +$ write aconf "# define fseeko64 fseeko" +$ write aconf "# define lseek64 lseek" +$ write aconf "# define ftello64 ftell" +$ write aconf "#endif" +$ write aconf "#if !defined( __VAX) && (__CRTL_VER >= 70312000)" +$ write aconf "# define HAVE_VSNPRINTF" +$ write aconf "#endif" +$ close aconf_in +$ close aconf +$ if f$search("''th'") .nes. "" then delete 'th';* +$! Build the thing plain or with mms +$! +$ write sys$output "Compiling Zlib sources ..." +$ if make.eqs."" +$ then +$ if (f$search( "example.obj;*") .nes. "") then delete example.obj;* +$ if (f$search( "minigzip.obj;*") .nes. "") then delete minigzip.obj;* +$ CALL MAKE adler32.OBJ "CC ''CCOPT' adler32" - + adler32.c zlib.h zconf.h +$ CALL MAKE compress.OBJ "CC ''CCOPT' compress" - + compress.c zlib.h zconf.h +$ CALL MAKE crc32.OBJ "CC ''CCOPT' crc32" - + crc32.c zlib.h zconf.h +$ CALL MAKE deflate.OBJ "CC ''CCOPT' deflate" - + deflate.c deflate.h zutil.h zlib.h zconf.h +$ CALL MAKE gzclose.OBJ "CC ''CCOPT' gzclose" - + gzclose.c zutil.h zlib.h zconf.h +$ CALL MAKE gzlib.OBJ "CC ''CCOPT' gzlib" - + gzlib.c zutil.h zlib.h zconf.h +$ CALL MAKE gzread.OBJ "CC ''CCOPT' gzread" - + gzread.c zutil.h zlib.h zconf.h +$ CALL MAKE gzwrite.OBJ "CC ''CCOPT' gzwrite" - + gzwrite.c zutil.h zlib.h zconf.h +$ CALL MAKE infback.OBJ "CC ''CCOPT' infback" - + infback.c zutil.h inftrees.h inflate.h inffast.h inffixed.h +$ CALL MAKE inffast.OBJ "CC ''CCOPT' inffast" - + inffast.c zutil.h zlib.h zconf.h inffast.h +$ CALL MAKE inflate.OBJ "CC ''CCOPT' inflate" - + inflate.c zutil.h zlib.h zconf.h infblock.h +$ CALL MAKE inftrees.OBJ "CC ''CCOPT' inftrees" - + inftrees.c zutil.h zlib.h zconf.h inftrees.h +$ CALL MAKE trees.OBJ "CC ''CCOPT' trees" - + trees.c deflate.h zutil.h zlib.h zconf.h +$ CALL MAKE uncompr.OBJ "CC ''CCOPT' uncompr" - + uncompr.c zlib.h zconf.h +$ CALL MAKE zutil.OBJ "CC ''CCOPT' zutil" - + zutil.c zutil.h zlib.h zconf.h +$ write sys$output "Building Zlib ..." +$ CALL MAKE libz.OLB "lib/crea libz.olb *.obj" *.OBJ +$ write sys$output "Building example..." +$ CALL MAKE example.OBJ "CC ''CCOPT' [.test]example" - + [.test]example.c zlib.h zconf.h +$ call make example.exe "LINK example,libz.olb/lib" example.obj libz.olb +$ write sys$output "Building minigzip..." +$ CALL MAKE minigzip.OBJ "CC ''CCOPT' [.test]minigzip" - + [.test]minigzip.c zlib.h zconf.h +$ call make minigzip.exe - + "LINK minigzip,libz.olb/lib" - + minigzip.obj libz.olb +$ else +$ gosub crea_mms +$ write sys$output "Make ''name' ''version' with ''Make' " +$ 'make' +$ endif +$! +$! Create shareable image +$! +$ gosub crea_olist +$ write sys$output "Creating libzshr.exe" +$ call map_2_shopt 'mapfile' 'optfile' +$ LINK_'lopts'/SHARE=libzshr.exe modules.opt/opt,'optfile'/opt +$ write sys$output "Zlib build completed" +$ delete/nolog tmp.opt;* +$ exit +$AMISS_ERR: +$ write sys$output "No source for config.hin found." +$ write sys$output "Tried any of ''aconf_in_file'" +$ goto err_exit +$CC_ERR: +$ write sys$output "C compiler required to build ''name'" +$ goto err_exit +$ERR_EXIT: +$ set message/facil/ident/sever/text +$ close/nolog optf +$ close/nolog topt +$ close/nolog aconf_in +$ close/nolog aconf +$ close/nolog out +$ close/nolog min +$ close/nolog mod +$ close/nolog h_in +$ write sys$output "Exiting..." +$ exit 2 +$! +$! +$MAKE: SUBROUTINE !SUBROUTINE TO CHECK DEPENDENCIES +$ V = 'F$Verify(0) +$! P1 = What we are trying to make +$! P2 = Command to make it +$! P3 - P8 What it depends on +$ +$ If F$Search(P1) .Eqs. "" Then Goto Makeit +$ Time = F$CvTime(F$File(P1,"RDT")) +$arg=3 +$Loop: +$ Argument = P'arg +$ If Argument .Eqs. "" Then Goto Exit +$ El=0 +$Loop2: +$ File = F$Element(El," ",Argument) +$ If File .Eqs. " " Then Goto Endl +$ AFile = "" +$Loop3: +$ OFile = AFile +$ AFile = F$Search(File) +$ If AFile .Eqs. "" .Or. AFile .Eqs. OFile Then Goto NextEl +$ If F$CvTime(F$File(AFile,"RDT")) .Ges. Time Then Goto Makeit +$ Goto Loop3 +$NextEL: +$ El = El + 1 +$ Goto Loop2 +$EndL: +$ arg=arg+1 +$ If arg .Le. 8 Then Goto Loop +$ Goto Exit +$ +$Makeit: +$ VV=F$VERIFY(0) +$ write sys$output P2 +$ 'P2 +$ VV='F$Verify(VV) +$Exit: +$ If V Then Set Verify +$ENDSUBROUTINE +$!------------------------------------------------------------------------------ +$! +$! Check command line options and set symbols accordingly +$! +$!------------------------------------------------------------------------------ +$! Version history +$! 0.01 20041206 First version to receive a number +$! 0.02 20060126 Add new "HELP" target +$ CHECK_OPTS: +$ i = 1 +$ OPT_LOOP: +$ if i .lt. 9 +$ then +$ cparm = f$edit(p'i',"upcase") +$! +$! Check if parameter actually contains something +$! +$ if f$edit(cparm,"trim") .nes. "" +$ then +$ if cparm .eqs. "DEBUG" +$ then +$ ccopt = ccopt + "/noopt/deb" +$ lopts = lopts + "/deb" +$ endif +$ if f$locate("CCOPT=",cparm) .lt. f$length(cparm) +$ then +$ start = f$locate("=",cparm) + 1 +$ len = f$length(cparm) - start +$ ccopt = ccopt + f$extract(start,len,cparm) +$ if f$locate("AS_IS",f$edit(ccopt,"UPCASE")) .lt. f$length(ccopt) - + then s_case = true +$ endif +$ if cparm .eqs. "LINK" then linkonly = true +$ if f$locate("LOPTS=",cparm) .lt. f$length(cparm) +$ then +$ start = f$locate("=",cparm) + 1 +$ len = f$length(cparm) - start +$ lopts = lopts + f$extract(start,len,cparm) +$ endif +$ if f$locate("CC=",cparm) .lt. f$length(cparm) +$ then +$ start = f$locate("=",cparm) + 1 +$ len = f$length(cparm) - start +$ cc_com = f$extract(start,len,cparm) + if (cc_com .nes. "DECC") .and. - + (cc_com .nes. "VAXC") .and. - + (cc_com .nes. "GNUC") +$ then +$ write sys$output "Unsupported compiler choice ''cc_com' ignored" +$ write sys$output "Use DECC, VAXC, or GNUC instead" +$ else +$ if cc_com .eqs. "DECC" then its_decc = true +$ if cc_com .eqs. "VAXC" then its_vaxc = true +$ if cc_com .eqs. "GNUC" then its_gnuc = true +$ endif +$ endif +$ if f$locate("MAKE=",cparm) .lt. f$length(cparm) +$ then +$ start = f$locate("=",cparm) + 1 +$ len = f$length(cparm) - start +$ mmks = f$extract(start,len,cparm) +$ if (mmks .eqs. "MMK") .or. (mmks .eqs. "MMS") +$ then +$ make = mmks +$ else +$ write sys$output "Unsupported make choice ''mmks' ignored" +$ write sys$output "Use MMK or MMS instead" +$ endif +$ endif +$ if cparm .eqs. "HELP" then gosub bhelp +$ endif +$ i = i + 1 +$ goto opt_loop +$ endif +$ return +$!------------------------------------------------------------------------------ +$! +$! Look for the compiler used +$! +$! Version history +$! 0.01 20040223 First version to receive a number +$! 0.02 20040229 Save/set value of decc$no_rooted_search_lists +$! 0.03 20060202 Extend handling of GNU C +$! 0.04 20090402 Compaq -> hp +$CHECK_COMPILER: +$ if (.not. (its_decc .or. its_vaxc .or. its_gnuc)) +$ then +$ its_decc = (f$search("SYS$SYSTEM:DECC$COMPILER.EXE") .nes. "") +$ its_vaxc = .not. its_decc .and. (F$Search("SYS$System:VAXC.Exe") .nes. "") +$ its_gnuc = .not. (its_decc .or. its_vaxc) .and. (f$trnlnm("gnu_cc") .nes. "") +$ endif +$! +$! Exit if no compiler available +$! +$ if (.not. (its_decc .or. its_vaxc .or. its_gnuc)) +$ then goto CC_ERR +$ else +$ if its_decc +$ then +$ write sys$output "CC compiler check ... hp C" +$ if f$trnlnm("decc$no_rooted_search_lists") .nes. "" +$ then +$ dnrsl = f$trnlnm("decc$no_rooted_search_lists") +$ endif +$ define/nolog decc$no_rooted_search_lists 1 +$ else +$ if its_vaxc then write sys$output "CC compiler check ... VAX C" +$ if its_gnuc +$ then +$ write sys$output "CC compiler check ... GNU C" +$ if f$trnlnm(topt) then write topt "gnu_cc:[000000]gcclib.olb/lib" +$ if f$trnlnm(optf) then write optf "gnu_cc:[000000]gcclib.olb/lib" +$ cc = "gcc" +$ endif +$ if f$trnlnm(topt) then write topt "sys$share:vaxcrtl.exe/share" +$ if f$trnlnm(optf) then write optf "sys$share:vaxcrtl.exe/share" +$ endif +$ endif +$ return +$!------------------------------------------------------------------------------ +$! +$! If MMS/MMK are available dump out the descrip.mms if required +$! +$CREA_MMS: +$ write sys$output "Creating descrip.mms..." +$ create descrip.mms +$ open/append out descrip.mms +$ copy sys$input: out +$ deck +# descrip.mms: MMS description file for building zlib on VMS +# written by Martin P.J. Zinser +# + +OBJS = adler32.obj, compress.obj, crc32.obj, gzclose.obj, gzlib.obj\ + gzread.obj, gzwrite.obj, uncompr.obj, infback.obj\ + deflate.obj, trees.obj, zutil.obj, inflate.obj, \ + inftrees.obj, inffast.obj + +$ eod +$ write out "CFLAGS=", ccopt +$ write out "LOPTS=", lopts +$ write out "all : example.exe minigzip.exe libz.olb" +$ copy sys$input: out +$ deck + @ write sys$output " Example applications available" + +libz.olb : libz.olb($(OBJS)) + @ write sys$output " libz available" + +example.exe : example.obj libz.olb + link $(LOPTS) example,libz.olb/lib + +minigzip.exe : minigzip.obj libz.olb + link $(LOPTS) minigzip,libz.olb/lib + +clean : + delete *.obj;*,libz.olb;*,*.opt;*,*.exe;* + + +# Other dependencies. +adler32.obj : adler32.c zutil.h zlib.h zconf.h +compress.obj : compress.c zlib.h zconf.h +crc32.obj : crc32.c zutil.h zlib.h zconf.h +deflate.obj : deflate.c deflate.h zutil.h zlib.h zconf.h +example.obj : [.test]example.c zlib.h zconf.h +gzclose.obj : gzclose.c zutil.h zlib.h zconf.h +gzlib.obj : gzlib.c zutil.h zlib.h zconf.h +gzread.obj : gzread.c zutil.h zlib.h zconf.h +gzwrite.obj : gzwrite.c zutil.h zlib.h zconf.h +inffast.obj : inffast.c zutil.h zlib.h zconf.h inftrees.h inffast.h +inflate.obj : inflate.c zutil.h zlib.h zconf.h +inftrees.obj : inftrees.c zutil.h zlib.h zconf.h inftrees.h +minigzip.obj : [.test]minigzip.c zlib.h zconf.h +trees.obj : trees.c deflate.h zutil.h zlib.h zconf.h +uncompr.obj : uncompr.c zlib.h zconf.h +zutil.obj : zutil.c zutil.h zlib.h zconf.h +infback.obj : infback.c zutil.h inftrees.h inflate.h inffast.h inffixed.h +$ eod +$ close out +$ return +$!------------------------------------------------------------------------------ +$! +$! Read list of core library sources from makefile.in and create options +$! needed to build shareable image +$! +$CREA_OLIST: +$ open/read min makefile.in +$ open/write mod modules.opt +$ src_check_list = "OBJZ =#OBJG =" +$MRLOOP: +$ read/end=mrdone min rec +$ i = 0 +$SRC_CHECK_LOOP: +$ src_check = f$element(i, "#", src_check_list) +$ i = i+1 +$ if src_check .eqs. "#" then goto mrloop +$ if (f$extract(0,6,rec) .nes. src_check) then goto src_check_loop +$ rec = rec - src_check +$ gosub extra_filnam +$ if (f$element(1,"\",rec) .eqs. "\") then goto mrloop +$MRSLOOP: +$ read/end=mrdone min rec +$ gosub extra_filnam +$ if (f$element(1,"\",rec) .nes. "\") then goto mrsloop +$MRDONE: +$ close min +$ close mod +$ return +$!------------------------------------------------------------------------------ +$! +$! Take record extracted in crea_olist and split it into single filenames +$! +$EXTRA_FILNAM: +$ myrec = f$edit(rec - "\", "trim,compress") +$ i = 0 +$FELOOP: +$ srcfil = f$element(i," ", myrec) +$ if (srcfil .nes. " ") +$ then +$ write mod f$parse(srcfil,,,"NAME"), ".obj" +$ i = i + 1 +$ goto feloop +$ endif +$ return +$!------------------------------------------------------------------------------ +$! +$! Find current Zlib version number +$! +$FIND_VERSION: +$ open/read h_in 'v_file' +$hloop: +$ read/end=hdone h_in rec +$ rec = f$edit(rec,"TRIM") +$ if (f$extract(0,1,rec) .nes. "#") then goto hloop +$ rec = f$edit(rec - "#", "TRIM") +$ if f$element(0," ",rec) .nes. "define" then goto hloop +$ if f$element(1," ",rec) .eqs. v_string +$ then +$ version = 'f$element(2," ",rec)' +$ goto hdone +$ endif +$ goto hloop +$hdone: +$ close h_in +$ return +$!------------------------------------------------------------------------------ +$! +$CHECK_CONFIG: +$! +$ in_ldef = f$locate(cdef,libdefs) +$ if (in_ldef .lt. f$length(libdefs)) +$ then +$ write aconf "#define ''cdef' 1" +$ libdefs = f$extract(0,in_ldef,libdefs) + - + f$extract(in_ldef + f$length(cdef) + 1, - + f$length(libdefs) - in_ldef - f$length(cdef) - 1, - + libdefs) +$ else +$ if (f$type('cdef') .eqs. "INTEGER") +$ then +$ write aconf "#define ''cdef' ", 'cdef' +$ else +$ if (f$type('cdef') .eqs. "STRING") +$ then +$ write aconf "#define ''cdef' ", """", '''cdef'', """" +$ else +$ gosub check_cc_def +$ endif +$ endif +$ endif +$ return +$!------------------------------------------------------------------------------ +$! +$! Check if this is a define relating to the properties of the C/C++ +$! compiler +$! +$ CHECK_CC_DEF: +$ if (cdef .eqs. "_LARGEFILE64_SOURCE") +$ then +$ copy sys$input: 'tc' +$ deck +#include "tconfig" +#define _LARGEFILE +#include + +int main(){ +FILE *fp; + fp = fopen("temp.txt","r"); + fseeko(fp,1,SEEK_SET); + fclose(fp); +} + +$ eod +$ test_inv = false +$ comm_h = false +$ gosub cc_prop_check +$ return +$ endif +$ write aconf "/* ", line, " */" +$ return +$!------------------------------------------------------------------------------ +$! +$! Check for properties of C/C++ compiler +$! +$! Version history +$! 0.01 20031020 First version to receive a number +$! 0.02 20031022 Added logic for defines with value +$! 0.03 20040309 Make sure local config file gets not deleted +$! 0.04 20041230 Also write include for configure run +$! 0.05 20050103 Add processing of "comment defines" +$CC_PROP_CHECK: +$ cc_prop = true +$ is_need = false +$ is_need = (f$extract(0,4,cdef) .eqs. "NEED") .or. (test_inv .eq. true) +$ if f$search(th) .eqs. "" then create 'th' +$ set message/nofac/noident/nosever/notext +$ on error then continue +$ cc 'tmpnam' +$ if .not. ($status) then cc_prop = false +$ on error then continue +$! The headers might lie about the capabilities of the RTL +$ link 'tmpnam',tmp.opt/opt +$ if .not. ($status) then cc_prop = false +$ set message/fac/ident/sever/text +$ on error then goto err_exit +$ delete/nolog 'tmpnam'.*;*/exclude='th' +$ if (cc_prop .and. .not. is_need) .or. - + (.not. cc_prop .and. is_need) +$ then +$ write sys$output "Checking for ''cdef'... yes" +$ if f$type('cdef_val'_yes) .nes. "" +$ then +$ if f$type('cdef_val'_yes) .eqs. "INTEGER" - + then call write_config f$fao("#define !AS !UL",cdef,'cdef_val'_yes) +$ if f$type('cdef_val'_yes) .eqs. "STRING" - + then call write_config f$fao("#define !AS !AS",cdef,'cdef_val'_yes) +$ else +$ call write_config f$fao("#define !AS 1",cdef) +$ endif +$ if (cdef .eqs. "HAVE_FSEEKO") .or. (cdef .eqs. "_LARGE_FILES") .or. - + (cdef .eqs. "_LARGEFILE64_SOURCE") then - + call write_config f$string("#define _LARGEFILE 1") +$ else +$ write sys$output "Checking for ''cdef'... no" +$ if (comm_h) +$ then + call write_config f$fao("/* !AS */",line) +$ else +$ if f$type('cdef_val'_no) .nes. "" +$ then +$ if f$type('cdef_val'_no) .eqs. "INTEGER" - + then call write_config f$fao("#define !AS !UL",cdef,'cdef_val'_no) +$ if f$type('cdef_val'_no) .eqs. "STRING" - + then call write_config f$fao("#define !AS !AS",cdef,'cdef_val'_no) +$ else +$ call write_config f$fao("#undef !AS",cdef) +$ endif +$ endif +$ endif +$ return +$!------------------------------------------------------------------------------ +$! +$! Check for properties of C/C++ compiler with multiple result values +$! +$! Version history +$! 0.01 20040127 First version +$! 0.02 20050103 Reconcile changes from cc_prop up to version 0.05 +$CC_MPROP_CHECK: +$ cc_prop = true +$ i = 1 +$ idel = 1 +$ MT_LOOP: +$ if f$type(result_'i') .eqs. "STRING" +$ then +$ set message/nofac/noident/nosever/notext +$ on error then continue +$ cc 'tmpnam'_'i' +$ if .not. ($status) then cc_prop = false +$ on error then continue +$! The headers might lie about the capabilities of the RTL +$ link 'tmpnam'_'i',tmp.opt/opt +$ if .not. ($status) then cc_prop = false +$ set message/fac/ident/sever/text +$ on error then goto err_exit +$ delete/nolog 'tmpnam'_'i'.*;* +$ if (cc_prop) +$ then +$ write sys$output "Checking for ''cdef'... ", mdef_'i' +$ if f$type(mdef_'i') .eqs. "INTEGER" - + then call write_config f$fao("#define !AS !UL",cdef,mdef_'i') +$ if f$type('cdef_val'_yes) .eqs. "STRING" - + then call write_config f$fao("#define !AS !AS",cdef,mdef_'i') +$ goto msym_clean +$ else +$ i = i + 1 +$ goto mt_loop +$ endif +$ endif +$ write sys$output "Checking for ''cdef'... no" +$ call write_config f$fao("#undef !AS",cdef) +$ MSYM_CLEAN: +$ if (idel .le. msym_max) +$ then +$ delete/sym mdef_'idel' +$ idel = idel + 1 +$ goto msym_clean +$ endif +$ return +$!------------------------------------------------------------------------------ +$! +$! Write configuration to both permanent and temporary config file +$! +$! Version history +$! 0.01 20031029 First version to receive a number +$! +$WRITE_CONFIG: SUBROUTINE +$ write aconf 'p1' +$ open/append confh 'th' +$ write confh 'p1' +$ close confh +$ENDSUBROUTINE +$!------------------------------------------------------------------------------ +$! +$! Analyze the project map file and create the symbol vector for a shareable +$! image from it +$! +$! Version history +$! 0.01 20120128 First version +$! 0.02 20120226 Add pre-load logic +$! +$ MAP_2_SHOPT: Subroutine +$! +$ SAY := "WRITE_ SYS$OUTPUT" +$! +$ IF F$SEARCH("''P1'") .EQS. "" +$ THEN +$ SAY "MAP_2_SHOPT-E-NOSUCHFILE: Error, inputfile ''p1' not available" +$ goto exit_m2s +$ ENDIF +$ IF "''P2'" .EQS. "" +$ THEN +$ SAY "MAP_2_SHOPT: Error, no output file provided" +$ goto exit_m2s +$ ENDIF +$! +$ module1 = "deflate#deflateEnd#deflateInit_#deflateParams#deflateSetDictionary" +$ module2 = "gzclose#gzerror#gzgetc#gzgets#gzopen#gzprintf#gzputc#gzputs#gzread" +$ module3 = "gzseek#gztell#inflate#inflateEnd#inflateInit_#inflateSetDictionary" +$ module4 = "inflateSync#uncompress#zlibVersion#compress" +$ open/read map 'p1 +$ if axp .or. ia64 +$ then +$ open/write aopt a.opt +$ open/write bopt b.opt +$ write aopt " CASE_SENSITIVE=YES" +$ write bopt "SYMBOL_VECTOR= (-" +$ mod_sym_num = 1 +$ MOD_SYM_LOOP: +$ if f$type(module'mod_sym_num') .nes. "" +$ then +$ mod_in = 0 +$ MOD_SYM_IN: +$ shared_proc = f$element(mod_in, "#", module'mod_sym_num') +$ if shared_proc .nes. "#" +$ then +$ write aopt f$fao(" symbol_vector=(!AS/!AS=PROCEDURE)",- + f$edit(shared_proc,"upcase"),shared_proc) +$ write bopt f$fao("!AS=PROCEDURE,-",shared_proc) +$ mod_in = mod_in + 1 +$ goto mod_sym_in +$ endif +$ mod_sym_num = mod_sym_num + 1 +$ goto mod_sym_loop +$ endif +$MAP_LOOP: +$ read/end=map_end map line +$ if (f$locate("{",line).lt. f$length(line)) .or. - + (f$locate("global:", line) .lt. f$length(line)) +$ then +$ proc = true +$ goto map_loop +$ endif +$ if f$locate("}",line).lt. f$length(line) then proc = false +$ if f$locate("local:", line) .lt. f$length(line) then proc = false +$ if proc +$ then +$ shared_proc = f$edit(line,"collapse") +$ chop_semi = f$locate(";", shared_proc) +$ if chop_semi .lt. f$length(shared_proc) then - + shared_proc = f$extract(0, chop_semi, shared_proc) +$ write aopt f$fao(" symbol_vector=(!AS/!AS=PROCEDURE)",- + f$edit(shared_proc,"upcase"),shared_proc) +$ write bopt f$fao("!AS=PROCEDURE,-",shared_proc) +$ endif +$ goto map_loop +$MAP_END: +$ close/nolog aopt +$ close/nolog bopt +$ open/append libopt 'p2' +$ open/read aopt a.opt +$ open/read bopt b.opt +$ALOOP: +$ read/end=aloop_end aopt line +$ write libopt line +$ goto aloop +$ALOOP_END: +$ close/nolog aopt +$ sv = "" +$BLOOP: +$ read/end=bloop_end bopt svn +$ if (svn.nes."") +$ then +$ if (sv.nes."") then write libopt sv +$ sv = svn +$ endif +$ goto bloop +$BLOOP_END: +$ write libopt f$extract(0,f$length(sv)-2,sv), "-" +$ write libopt ")" +$ close/nolog bopt +$ delete/nolog/noconf a.opt;*,b.opt;* +$ else +$ if vax +$ then +$ open/append libopt 'p2' +$ mod_sym_num = 1 +$ VMOD_SYM_LOOP: +$ if f$type(module'mod_sym_num') .nes. "" +$ then +$ mod_in = 0 +$ VMOD_SYM_IN: +$ shared_proc = f$element(mod_in, "#", module'mod_sym_num') +$ if shared_proc .nes. "#" +$ then +$ write libopt f$fao("UNIVERSAL=!AS",- + f$edit(shared_proc,"upcase")) +$ mod_in = mod_in + 1 +$ goto vmod_sym_in +$ endif +$ mod_sym_num = mod_sym_num + 1 +$ goto vmod_sym_loop +$ endif +$VMAP_LOOP: +$ read/end=vmap_end map line +$ if (f$locate("{",line).lt. f$length(line)) .or. - + (f$locate("global:", line) .lt. f$length(line)) +$ then +$ proc = true +$ goto vmap_loop +$ endif +$ if f$locate("}",line).lt. f$length(line) then proc = false +$ if f$locate("local:", line) .lt. f$length(line) then proc = false +$ if proc +$ then +$ shared_proc = f$edit(line,"collapse") +$ chop_semi = f$locate(";", shared_proc) +$ if chop_semi .lt. f$length(shared_proc) then - + shared_proc = f$extract(0, chop_semi, shared_proc) +$ write libopt f$fao("UNIVERSAL=!AS",- + f$edit(shared_proc,"upcase")) +$ endif +$ goto vmap_loop +$VMAP_END: +$ else +$ write sys$output "Unknown Architecture (Not VAX, AXP, or IA64)" +$ write sys$output "No options file created" +$ endif +$ endif +$ EXIT_M2S: +$ close/nolog map +$ close/nolog libopt +$ endsubroutine diff --git a/software/scsi2sd-util/zlib-1.2.8/msdos/Makefile.bor b/software/scsi2sd-util/zlib-1.2.8/msdos/Makefile.bor new file mode 100644 index 0000000..3d12a2c --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/msdos/Makefile.bor @@ -0,0 +1,115 @@ +# Makefile for zlib +# Borland C++ +# Last updated: 15-Mar-2003 + +# To use, do "make -fmakefile.bor" +# To compile in small model, set below: MODEL=s + +# WARNING: the small model is supported but only for small values of +# MAX_WBITS and MAX_MEM_LEVEL. For example: +# -DMAX_WBITS=11 -DDEF_WBITS=11 -DMAX_MEM_LEVEL=3 +# If you wish to reduce the memory requirements (default 256K for big +# objects plus a few K), you can add to the LOC macro below: +# -DMAX_MEM_LEVEL=7 -DMAX_WBITS=14 +# See zconf.h for details about the memory requirements. + +# ------------ Turbo C++, Borland C++ ------------ + +# Optional nonstandard preprocessor flags (e.g. -DMAX_MEM_LEVEL=7) +# should be added to the environment via "set LOCAL_ZLIB=-DFOO" or added +# to the declaration of LOC here: +LOC = $(LOCAL_ZLIB) + +# type for CPU required: 0: 8086, 1: 80186, 2: 80286, 3: 80386, etc. +CPU_TYP = 0 + +# memory model: one of s, m, c, l (small, medium, compact, large) +MODEL=l + +# replace bcc with tcc for Turbo C++ 1.0, with bcc32 for the 32 bit version +CC=bcc +LD=bcc +AR=tlib + +# compiler flags +# replace "-O2" by "-O -G -a -d" for Turbo C++ 1.0 +CFLAGS=-O2 -Z -m$(MODEL) $(LOC) + +LDFLAGS=-m$(MODEL) -f- + + +# variables +ZLIB_LIB = zlib_$(MODEL).lib + +OBJ1 = adler32.obj compress.obj crc32.obj deflate.obj gzclose.obj gzlib.obj gzread.obj +OBJ2 = gzwrite.obj infback.obj inffast.obj inflate.obj inftrees.obj trees.obj uncompr.obj zutil.obj +OBJP1 = +adler32.obj+compress.obj+crc32.obj+deflate.obj+gzclose.obj+gzlib.obj+gzread.obj +OBJP2 = +gzwrite.obj+infback.obj+inffast.obj+inflate.obj+inftrees.obj+trees.obj+uncompr.obj+zutil.obj + + +# targets +all: $(ZLIB_LIB) example.exe minigzip.exe + +.c.obj: + $(CC) -c $(CFLAGS) $*.c + +adler32.obj: adler32.c zlib.h zconf.h + +compress.obj: compress.c zlib.h zconf.h + +crc32.obj: crc32.c zlib.h zconf.h crc32.h + +deflate.obj: deflate.c deflate.h zutil.h zlib.h zconf.h + +gzclose.obj: gzclose.c zlib.h zconf.h gzguts.h + +gzlib.obj: gzlib.c zlib.h zconf.h gzguts.h + +gzread.obj: gzread.c zlib.h zconf.h gzguts.h + +gzwrite.obj: gzwrite.c zlib.h zconf.h gzguts.h + +infback.obj: infback.c zutil.h zlib.h zconf.h inftrees.h inflate.h \ + inffast.h inffixed.h + +inffast.obj: inffast.c zutil.h zlib.h zconf.h inftrees.h inflate.h \ + inffast.h + +inflate.obj: inflate.c zutil.h zlib.h zconf.h inftrees.h inflate.h \ + inffast.h inffixed.h + +inftrees.obj: inftrees.c zutil.h zlib.h zconf.h inftrees.h + +trees.obj: trees.c zutil.h zlib.h zconf.h deflate.h trees.h + +uncompr.obj: uncompr.c zlib.h zconf.h + +zutil.obj: zutil.c zutil.h zlib.h zconf.h + +example.obj: test/example.c zlib.h zconf.h + +minigzip.obj: test/minigzip.c zlib.h zconf.h + + +# the command line is cut to fit in the MS-DOS 128 byte limit: +$(ZLIB_LIB): $(OBJ1) $(OBJ2) + -del $(ZLIB_LIB) + $(AR) $(ZLIB_LIB) $(OBJP1) + $(AR) $(ZLIB_LIB) $(OBJP2) + +example.exe: example.obj $(ZLIB_LIB) + $(LD) $(LDFLAGS) example.obj $(ZLIB_LIB) + +minigzip.exe: minigzip.obj $(ZLIB_LIB) + $(LD) $(LDFLAGS) minigzip.obj $(ZLIB_LIB) + +test: example.exe minigzip.exe + example + echo hello world | minigzip | minigzip -d + +clean: + -del *.obj + -del *.lib + -del *.exe + -del zlib_*.bak + -del foo.gz diff --git a/software/scsi2sd-util/zlib-1.2.8/msdos/Makefile.dj2 b/software/scsi2sd-util/zlib-1.2.8/msdos/Makefile.dj2 new file mode 100644 index 0000000..29b0395 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/msdos/Makefile.dj2 @@ -0,0 +1,104 @@ +# Makefile for zlib. Modified for djgpp v2.0 by F. J. Donahoe, 3/15/96. +# Copyright (C) 1995-1998 Jean-loup Gailly. +# For conditions of distribution and use, see copyright notice in zlib.h + +# To compile, or to compile and test, type: +# +# make -fmakefile.dj2; make test -fmakefile.dj2 +# +# To install libz.a, zconf.h and zlib.h in the djgpp directories, type: +# +# make install -fmakefile.dj2 +# +# after first defining LIBRARY_PATH and INCLUDE_PATH in djgpp.env as +# in the sample below if the pattern of the DJGPP distribution is to +# be followed. Remember that, while 'es around <=> are ignored in +# makefiles, they are *not* in batch files or in djgpp.env. +# - - - - - +# [make] +# INCLUDE_PATH=%\>;INCLUDE_PATH%%\DJDIR%\include +# LIBRARY_PATH=%\>;LIBRARY_PATH%%\DJDIR%\lib +# BUTT=-m486 +# - - - - - +# Alternately, these variables may be defined below, overriding the values +# in djgpp.env, as +# INCLUDE_PATH=c:\usr\include +# LIBRARY_PATH=c:\usr\lib + +CC=gcc + +#CFLAGS=-MMD -O +#CFLAGS=-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7 +#CFLAGS=-MMD -g -DDEBUG +CFLAGS=-MMD -O3 $(BUTT) -Wall -Wwrite-strings -Wpointer-arith -Wconversion \ + -Wstrict-prototypes -Wmissing-prototypes + +# If cp.exe is available, replace "copy /Y" with "cp -fp" . +CP=copy /Y +# If gnu install.exe is available, replace $(CP) with ginstall. +INSTALL=$(CP) +# The default value of RM is "rm -f." If "rm.exe" is found, comment out: +RM=del +LDLIBS=-L. -lz +LD=$(CC) -s -o +LDSHARED=$(CC) + +INCL=zlib.h zconf.h +LIBS=libz.a + +AR=ar rcs + +prefix=/usr/local +exec_prefix = $(prefix) + +OBJS = adler32.o compress.o crc32.o gzclose.o gzlib.o gzread.o gzwrite.o \ + uncompr.o deflate.o trees.o zutil.o inflate.o infback.o inftrees.o inffast.o + +OBJA = +# to use the asm code: make OBJA=match.o + +TEST_OBJS = example.o minigzip.o + +all: example.exe minigzip.exe + +check: test +test: all + ./example + echo hello world | .\minigzip | .\minigzip -d + +%.o : %.c + $(CC) $(CFLAGS) -c $< -o $@ + +libz.a: $(OBJS) $(OBJA) + $(AR) $@ $(OBJS) $(OBJA) + +%.exe : %.o $(LIBS) + $(LD) $@ $< $(LDLIBS) + +# INCLUDE_PATH and LIBRARY_PATH were set for [make] in djgpp.env . + +.PHONY : uninstall clean + +install: $(INCL) $(LIBS) + -@if not exist $(INCLUDE_PATH)\nul mkdir $(INCLUDE_PATH) + -@if not exist $(LIBRARY_PATH)\nul mkdir $(LIBRARY_PATH) + $(INSTALL) zlib.h $(INCLUDE_PATH) + $(INSTALL) zconf.h $(INCLUDE_PATH) + $(INSTALL) libz.a $(LIBRARY_PATH) + +uninstall: + $(RM) $(INCLUDE_PATH)\zlib.h + $(RM) $(INCLUDE_PATH)\zconf.h + $(RM) $(LIBRARY_PATH)\libz.a + +clean: + $(RM) *.d + $(RM) *.o + $(RM) *.exe + $(RM) libz.a + $(RM) foo.gz + +DEPS := $(wildcard *.d) +ifneq ($(DEPS),) +include $(DEPS) +endif diff --git a/software/scsi2sd-util/zlib-1.2.8/msdos/Makefile.emx b/software/scsi2sd-util/zlib-1.2.8/msdos/Makefile.emx new file mode 100644 index 0000000..9c1b57a --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/msdos/Makefile.emx @@ -0,0 +1,69 @@ +# Makefile for zlib. Modified for emx 0.9c by Chr. Spieler, 6/17/98. +# Copyright (C) 1995-1998 Jean-loup Gailly. +# For conditions of distribution and use, see copyright notice in zlib.h + +# To compile, or to compile and test, type: +# +# make -fmakefile.emx; make test -fmakefile.emx +# + +CC=gcc + +#CFLAGS=-MMD -O +#CFLAGS=-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7 +#CFLAGS=-MMD -g -DDEBUG +CFLAGS=-MMD -O3 $(BUTT) -Wall -Wwrite-strings -Wpointer-arith -Wconversion \ + -Wstrict-prototypes -Wmissing-prototypes + +# If cp.exe is available, replace "copy /Y" with "cp -fp" . +CP=copy /Y +# If gnu install.exe is available, replace $(CP) with ginstall. +INSTALL=$(CP) +# The default value of RM is "rm -f." If "rm.exe" is found, comment out: +RM=del +LDLIBS=-L. -lzlib +LD=$(CC) -s -o +LDSHARED=$(CC) + +INCL=zlib.h zconf.h +LIBS=zlib.a + +AR=ar rcs + +prefix=/usr/local +exec_prefix = $(prefix) + +OBJS = adler32.o compress.o crc32.o gzclose.o gzlib.o gzread.o gzwrite.o \ + uncompr.o deflate.o trees.o zutil.o inflate.o infback.o inftrees.o inffast.o + +TEST_OBJS = example.o minigzip.o + +all: example.exe minigzip.exe + +test: all + ./example + echo hello world | .\minigzip | .\minigzip -d + +%.o : %.c + $(CC) $(CFLAGS) -c $< -o $@ + +zlib.a: $(OBJS) + $(AR) $@ $(OBJS) + +%.exe : %.o $(LIBS) + $(LD) $@ $< $(LDLIBS) + + +.PHONY : clean + +clean: + $(RM) *.d + $(RM) *.o + $(RM) *.exe + $(RM) zlib.a + $(RM) foo.gz + +DEPS := $(wildcard *.d) +ifneq ($(DEPS),) +include $(DEPS) +endif diff --git a/software/scsi2sd-util/zlib-1.2.8/msdos/Makefile.msc b/software/scsi2sd-util/zlib-1.2.8/msdos/Makefile.msc new file mode 100644 index 0000000..ae83786 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/msdos/Makefile.msc @@ -0,0 +1,112 @@ +# Makefile for zlib +# Microsoft C 5.1 or later +# Last updated: 19-Mar-2003 + +# To use, do "make makefile.msc" +# To compile in small model, set below: MODEL=S + +# If you wish to reduce the memory requirements (default 256K for big +# objects plus a few K), you can add to the LOC macro below: +# -DMAX_MEM_LEVEL=7 -DMAX_WBITS=14 +# See zconf.h for details about the memory requirements. + +# ------------- Microsoft C 5.1 and later ------------- + +# Optional nonstandard preprocessor flags (e.g. -DMAX_MEM_LEVEL=7) +# should be added to the environment via "set LOCAL_ZLIB=-DFOO" or added +# to the declaration of LOC here: +LOC = $(LOCAL_ZLIB) + +# Type for CPU required: 0: 8086, 1: 80186, 2: 80286, 3: 80386, etc. +CPU_TYP = 0 + +# Memory model: one of S, M, C, L (small, medium, compact, large) +MODEL=L + +CC=cl +CFLAGS=-nologo -A$(MODEL) -G$(CPU_TYP) -W3 -Oait -Gs $(LOC) +#-Ox generates bad code with MSC 5.1 +LIB_CFLAGS=-Zl $(CFLAGS) + +LD=link +LDFLAGS=/noi/e/st:0x1500/noe/farcall/packcode +# "/farcall/packcode" are only useful for `large code' memory models +# but should be a "no-op" for small code models. + + +# variables +ZLIB_LIB = zlib_$(MODEL).lib + +OBJ1 = adler32.obj compress.obj crc32.obj deflate.obj gzclose.obj gzlib.obj gzread.obj +OBJ2 = gzwrite.obj infback.obj inffast.obj inflate.obj inftrees.obj trees.obj uncompr.obj zutil.obj + + +# targets +all: $(ZLIB_LIB) example.exe minigzip.exe + +.c.obj: + $(CC) -c $(LIB_CFLAGS) $*.c + +adler32.obj: adler32.c zlib.h zconf.h + +compress.obj: compress.c zlib.h zconf.h + +crc32.obj: crc32.c zlib.h zconf.h crc32.h + +deflate.obj: deflate.c deflate.h zutil.h zlib.h zconf.h + +gzclose.obj: gzclose.c zlib.h zconf.h gzguts.h + +gzlib.obj: gzlib.c zlib.h zconf.h gzguts.h + +gzread.obj: gzread.c zlib.h zconf.h gzguts.h + +gzwrite.obj: gzwrite.c zlib.h zconf.h gzguts.h + +infback.obj: infback.c zutil.h zlib.h zconf.h inftrees.h inflate.h \ + inffast.h inffixed.h + +inffast.obj: inffast.c zutil.h zlib.h zconf.h inftrees.h inflate.h \ + inffast.h + +inflate.obj: inflate.c zutil.h zlib.h zconf.h inftrees.h inflate.h \ + inffast.h inffixed.h + +inftrees.obj: inftrees.c zutil.h zlib.h zconf.h inftrees.h + +trees.obj: trees.c zutil.h zlib.h zconf.h deflate.h trees.h + +uncompr.obj: uncompr.c zlib.h zconf.h + +zutil.obj: zutil.c zutil.h zlib.h zconf.h + +example.obj: test/example.c zlib.h zconf.h + $(CC) -c $(CFLAGS) $*.c + +minigzip.obj: test/minigzip.c zlib.h zconf.h + $(CC) -c $(CFLAGS) $*.c + + +# the command line is cut to fit in the MS-DOS 128 byte limit: +$(ZLIB_LIB): $(OBJ1) $(OBJ2) + if exist $(ZLIB_LIB) del $(ZLIB_LIB) + lib $(ZLIB_LIB) $(OBJ1); + lib $(ZLIB_LIB) $(OBJ2); + +example.exe: example.obj $(ZLIB_LIB) + $(LD) $(LDFLAGS) example.obj,,,$(ZLIB_LIB); + +minigzip.exe: minigzip.obj $(ZLIB_LIB) + $(LD) $(LDFLAGS) minigzip.obj,,,$(ZLIB_LIB); + +test: example.exe minigzip.exe + example + echo hello world | minigzip | minigzip -d + +clean: + -del *.obj + -del *.lib + -del *.exe + -del *.map + -del zlib_*.bak + -del foo.gz diff --git a/software/scsi2sd-util/zlib-1.2.8/msdos/Makefile.tc b/software/scsi2sd-util/zlib-1.2.8/msdos/Makefile.tc new file mode 100644 index 0000000..5aec82a --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/msdos/Makefile.tc @@ -0,0 +1,100 @@ +# Makefile for zlib +# Turbo C 2.01, Turbo C++ 1.01 +# Last updated: 15-Mar-2003 + +# To use, do "make -fmakefile.tc" +# To compile in small model, set below: MODEL=s + +# WARNING: the small model is supported but only for small values of +# MAX_WBITS and MAX_MEM_LEVEL. For example: +# -DMAX_WBITS=11 -DMAX_MEM_LEVEL=3 +# If you wish to reduce the memory requirements (default 256K for big +# objects plus a few K), you can add to CFLAGS below: +# -DMAX_MEM_LEVEL=7 -DMAX_WBITS=14 +# See zconf.h for details about the memory requirements. + +# ------------ Turbo C 2.01, Turbo C++ 1.01 ------------ +MODEL=l +CC=tcc +LD=tcc +AR=tlib +# CFLAGS=-O2 -G -Z -m$(MODEL) -DMAX_WBITS=11 -DMAX_MEM_LEVEL=3 +CFLAGS=-O2 -G -Z -m$(MODEL) +LDFLAGS=-m$(MODEL) -f- + + +# variables +ZLIB_LIB = zlib_$(MODEL).lib + +OBJ1 = adler32.obj compress.obj crc32.obj deflate.obj gzclose.obj gzlib.obj gzread.obj +OBJ2 = gzwrite.obj infback.obj inffast.obj inflate.obj inftrees.obj trees.obj uncompr.obj zutil.obj +OBJP1 = +adler32.obj+compress.obj+crc32.obj+deflate.obj+gzclose.obj+gzlib.obj+gzread.obj +OBJP2 = +gzwrite.obj+infback.obj+inffast.obj+inflate.obj+inftrees.obj+trees.obj+uncompr.obj+zutil.obj + + +# targets +all: $(ZLIB_LIB) example.exe minigzip.exe + +.c.obj: + $(CC) -c $(CFLAGS) $*.c + +adler32.obj: adler32.c zlib.h zconf.h + +compress.obj: compress.c zlib.h zconf.h + +crc32.obj: crc32.c zlib.h zconf.h crc32.h + +deflate.obj: deflate.c deflate.h zutil.h zlib.h zconf.h + +gzclose.obj: gzclose.c zlib.h zconf.h gzguts.h + +gzlib.obj: gzlib.c zlib.h zconf.h gzguts.h + +gzread.obj: gzread.c zlib.h zconf.h gzguts.h + +gzwrite.obj: gzwrite.c zlib.h zconf.h gzguts.h + +infback.obj: infback.c zutil.h zlib.h zconf.h inftrees.h inflate.h \ + inffast.h inffixed.h + +inffast.obj: inffast.c zutil.h zlib.h zconf.h inftrees.h inflate.h \ + inffast.h + +inflate.obj: inflate.c zutil.h zlib.h zconf.h inftrees.h inflate.h \ + inffast.h inffixed.h + +inftrees.obj: inftrees.c zutil.h zlib.h zconf.h inftrees.h + +trees.obj: trees.c zutil.h zlib.h zconf.h deflate.h trees.h + +uncompr.obj: uncompr.c zlib.h zconf.h + +zutil.obj: zutil.c zutil.h zlib.h zconf.h + +example.obj: test/example.c zlib.h zconf.h + +minigzip.obj: test/minigzip.c zlib.h zconf.h + + +# the command line is cut to fit in the MS-DOS 128 byte limit: +$(ZLIB_LIB): $(OBJ1) $(OBJ2) + -del $(ZLIB_LIB) + $(AR) $(ZLIB_LIB) $(OBJP1) + $(AR) $(ZLIB_LIB) $(OBJP2) + +example.exe: example.obj $(ZLIB_LIB) + $(LD) $(LDFLAGS) example.obj $(ZLIB_LIB) + +minigzip.exe: minigzip.obj $(ZLIB_LIB) + $(LD) $(LDFLAGS) minigzip.obj $(ZLIB_LIB) + +test: example.exe minigzip.exe + example + echo hello world | minigzip | minigzip -d + +clean: + -del *.obj + -del *.lib + -del *.exe + -del zlib_*.bak + -del foo.gz diff --git a/software/scsi2sd-util/zlib-1.2.8/nintendods/Makefile b/software/scsi2sd-util/zlib-1.2.8/nintendods/Makefile new file mode 100644 index 0000000..21337d0 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/nintendods/Makefile @@ -0,0 +1,126 @@ +#--------------------------------------------------------------------------------- +.SUFFIXES: +#--------------------------------------------------------------------------------- + +ifeq ($(strip $(DEVKITARM)),) +$(error "Please set DEVKITARM in your environment. export DEVKITARM=devkitARM") +endif + +include $(DEVKITARM)/ds_rules + +#--------------------------------------------------------------------------------- +# TARGET is the name of the output +# BUILD is the directory where object files & intermediate files will be placed +# SOURCES is a list of directories containing source code +# DATA is a list of directories containing data files +# INCLUDES is a list of directories containing header files +#--------------------------------------------------------------------------------- +TARGET := $(shell basename $(CURDIR)) +BUILD := build +SOURCES := ../../ +DATA := data +INCLUDES := include + +#--------------------------------------------------------------------------------- +# options for code generation +#--------------------------------------------------------------------------------- +ARCH := -mthumb -mthumb-interwork + +CFLAGS := -Wall -O2\ + -march=armv5te -mtune=arm946e-s \ + -fomit-frame-pointer -ffast-math \ + $(ARCH) + +CFLAGS += $(INCLUDE) -DARM9 +CXXFLAGS := $(CFLAGS) -fno-rtti -fno-exceptions + +ASFLAGS := $(ARCH) -march=armv5te -mtune=arm946e-s +LDFLAGS = -specs=ds_arm9.specs -g $(ARCH) -Wl,-Map,$(notdir $*.map) + +#--------------------------------------------------------------------------------- +# list of directories containing libraries, this must be the top level containing +# include and lib +#--------------------------------------------------------------------------------- +LIBDIRS := $(LIBNDS) + +#--------------------------------------------------------------------------------- +# no real need to edit anything past this point unless you need to add additional +# rules for different file extensions +#--------------------------------------------------------------------------------- +ifneq ($(BUILD),$(notdir $(CURDIR))) +#--------------------------------------------------------------------------------- + +export OUTPUT := $(CURDIR)/lib/libz.a + +export VPATH := $(foreach dir,$(SOURCES),$(CURDIR)/$(dir)) \ + $(foreach dir,$(DATA),$(CURDIR)/$(dir)) + +export DEPSDIR := $(CURDIR)/$(BUILD) + +CFILES := $(foreach dir,$(SOURCES),$(notdir $(wildcard $(dir)/*.c))) +CPPFILES := $(foreach dir,$(SOURCES),$(notdir $(wildcard $(dir)/*.cpp))) +SFILES := $(foreach dir,$(SOURCES),$(notdir $(wildcard $(dir)/*.s))) +BINFILES := $(foreach dir,$(DATA),$(notdir $(wildcard $(dir)/*.*))) + +#--------------------------------------------------------------------------------- +# use CXX for linking C++ projects, CC for standard C +#--------------------------------------------------------------------------------- +ifeq ($(strip $(CPPFILES)),) +#--------------------------------------------------------------------------------- + export LD := $(CC) +#--------------------------------------------------------------------------------- +else +#--------------------------------------------------------------------------------- + export LD := $(CXX) +#--------------------------------------------------------------------------------- +endif +#--------------------------------------------------------------------------------- + +export OFILES := $(addsuffix .o,$(BINFILES)) \ + $(CPPFILES:.cpp=.o) $(CFILES:.c=.o) $(SFILES:.s=.o) + +export INCLUDE := $(foreach dir,$(INCLUDES),-I$(CURDIR)/$(dir)) \ + $(foreach dir,$(LIBDIRS),-I$(dir)/include) \ + -I$(CURDIR)/$(BUILD) + +.PHONY: $(BUILD) clean all + +#--------------------------------------------------------------------------------- +all: $(BUILD) + @[ -d $@ ] || mkdir -p include + @cp ../../*.h include + +lib: + @[ -d $@ ] || mkdir -p $@ + +$(BUILD): lib + @[ -d $@ ] || mkdir -p $@ + @$(MAKE) --no-print-directory -C $(BUILD) -f $(CURDIR)/Makefile + +#--------------------------------------------------------------------------------- +clean: + @echo clean ... + @rm -fr $(BUILD) lib + +#--------------------------------------------------------------------------------- +else + +DEPENDS := $(OFILES:.o=.d) + +#--------------------------------------------------------------------------------- +# main targets +#--------------------------------------------------------------------------------- +$(OUTPUT) : $(OFILES) + +#--------------------------------------------------------------------------------- +%.bin.o : %.bin +#--------------------------------------------------------------------------------- + @echo $(notdir $<) + @$(bin2o) + + +-include $(DEPENDS) + +#--------------------------------------------------------------------------------------- +endif +#--------------------------------------------------------------------------------------- diff --git a/software/scsi2sd-util/zlib-1.2.8/nintendods/README b/software/scsi2sd-util/zlib-1.2.8/nintendods/README new file mode 100644 index 0000000..ba7a37d --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/nintendods/README @@ -0,0 +1,5 @@ +This Makefile requires devkitARM (http://www.devkitpro.org/category/devkitarm/) and works inside "contrib/nds". It is based on a devkitARM template. + +Eduardo Costa +January 3, 2009 + diff --git a/software/scsi2sd-util/zlib-1.2.8/old/Makefile.emx b/software/scsi2sd-util/zlib-1.2.8/old/Makefile.emx new file mode 100644 index 0000000..4d6ab0e --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/old/Makefile.emx @@ -0,0 +1,69 @@ +# Makefile for zlib. Modified for emx/rsxnt by Chr. Spieler, 6/16/98. +# Copyright (C) 1995-1998 Jean-loup Gailly. +# For conditions of distribution and use, see copyright notice in zlib.h + +# To compile, or to compile and test, type: +# +# make -fmakefile.emx; make test -fmakefile.emx +# + +CC=gcc -Zwin32 + +#CFLAGS=-MMD -O +#CFLAGS=-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7 +#CFLAGS=-MMD -g -DDEBUG +CFLAGS=-MMD -O3 $(BUTT) -Wall -Wwrite-strings -Wpointer-arith -Wconversion \ + -Wstrict-prototypes -Wmissing-prototypes + +# If cp.exe is available, replace "copy /Y" with "cp -fp" . +CP=copy /Y +# If gnu install.exe is available, replace $(CP) with ginstall. +INSTALL=$(CP) +# The default value of RM is "rm -f." If "rm.exe" is found, comment out: +RM=del +LDLIBS=-L. -lzlib +LD=$(CC) -s -o +LDSHARED=$(CC) + +INCL=zlib.h zconf.h +LIBS=zlib.a + +AR=ar rcs + +prefix=/usr/local +exec_prefix = $(prefix) + +OBJS = adler32.o compress.o crc32.o deflate.o gzclose.o gzlib.o gzread.o \ + gzwrite.o infback.o inffast.o inflate.o inftrees.o trees.o uncompr.o zutil.o + +TEST_OBJS = example.o minigzip.o + +all: example.exe minigzip.exe + +test: all + ./example + echo hello world | .\minigzip | .\minigzip -d + +%.o : %.c + $(CC) $(CFLAGS) -c $< -o $@ + +zlib.a: $(OBJS) + $(AR) $@ $(OBJS) + +%.exe : %.o $(LIBS) + $(LD) $@ $< $(LDLIBS) + + +.PHONY : clean + +clean: + $(RM) *.d + $(RM) *.o + $(RM) *.exe + $(RM) zlib.a + $(RM) foo.gz + +DEPS := $(wildcard *.d) +ifneq ($(DEPS),) +include $(DEPS) +endif diff --git a/software/scsi2sd-util/zlib-1.2.8/old/Makefile.riscos b/software/scsi2sd-util/zlib-1.2.8/old/Makefile.riscos new file mode 100644 index 0000000..57e29d3 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/old/Makefile.riscos @@ -0,0 +1,151 @@ +# Project: zlib_1_03 +# Patched for zlib 1.1.2 rw@shadow.org.uk 19980430 +# test works out-of-the-box, installs `somewhere' on demand + +# Toolflags: +CCflags = -c -depend !Depend -IC: -g -throwback -DRISCOS -fah +C++flags = -c -depend !Depend -IC: -throwback +Linkflags = -aif -c++ -o $@ +ObjAsmflags = -throwback -NoCache -depend !Depend +CMHGflags = +LibFileflags = -c -l -o $@ +Squeezeflags = -o $@ + +# change the line below to where _you_ want the library installed. +libdest = lib:zlib + +# Final targets: +@.lib: @.o.adler32 @.o.compress @.o.crc32 @.o.deflate @.o.gzio \ + @.o.infblock @.o.infcodes @.o.inffast @.o.inflate @.o.inftrees @.o.infutil @.o.trees \ + @.o.uncompr @.o.zutil + LibFile $(LibFileflags) @.o.adler32 @.o.compress @.o.crc32 @.o.deflate \ + @.o.gzio @.o.infblock @.o.infcodes @.o.inffast @.o.inflate @.o.inftrees @.o.infutil \ + @.o.trees @.o.uncompr @.o.zutil +test: @.minigzip @.example @.lib + @copy @.lib @.libc A~C~DF~L~N~P~Q~RS~TV + @echo running tests: hang on. + @/@.minigzip -f -9 libc + @/@.minigzip -d libc-gz + @/@.minigzip -f -1 libc + @/@.minigzip -d libc-gz + @/@.minigzip -h -9 libc + @/@.minigzip -d libc-gz + @/@.minigzip -h -1 libc + @/@.minigzip -d libc-gz + @/@.minigzip -9 libc + @/@.minigzip -d libc-gz + @/@.minigzip -1 libc + @/@.minigzip -d libc-gz + @diff @.lib @.libc + @echo that should have reported '@.lib and @.libc identical' if you have diff. + @/@.example @.fred @.fred + @echo that will have given lots of hello!'s. + +@.minigzip: @.o.minigzip @.lib C:o.Stubs + Link $(Linkflags) @.o.minigzip @.lib C:o.Stubs +@.example: @.o.example @.lib C:o.Stubs + Link $(Linkflags) @.o.example @.lib C:o.Stubs + +install: @.lib + cdir $(libdest) + cdir $(libdest).h + @copy @.h.zlib $(libdest).h.zlib A~C~DF~L~N~P~Q~RS~TV + @copy @.h.zconf $(libdest).h.zconf A~C~DF~L~N~P~Q~RS~TV + @copy @.lib $(libdest).lib A~C~DF~L~N~P~Q~RS~TV + @echo okay, installed zlib in $(libdest) + +clean:; remove @.minigzip + remove @.example + remove @.libc + -wipe @.o.* F~r~cV + remove @.fred + +# User-editable dependencies: +.c.o: + cc $(ccflags) -o $@ $< + +# Static dependencies: + +# Dynamic dependencies: +o.example: c.example +o.example: h.zlib +o.example: h.zconf +o.minigzip: c.minigzip +o.minigzip: h.zlib +o.minigzip: h.zconf +o.adler32: c.adler32 +o.adler32: h.zlib +o.adler32: h.zconf +o.compress: c.compress +o.compress: h.zlib +o.compress: h.zconf +o.crc32: c.crc32 +o.crc32: h.zlib +o.crc32: h.zconf +o.deflate: c.deflate +o.deflate: h.deflate +o.deflate: h.zutil +o.deflate: h.zlib +o.deflate: h.zconf +o.gzio: c.gzio +o.gzio: h.zutil +o.gzio: h.zlib +o.gzio: h.zconf +o.infblock: c.infblock +o.infblock: h.zutil +o.infblock: h.zlib +o.infblock: h.zconf +o.infblock: h.infblock +o.infblock: h.inftrees +o.infblock: h.infcodes +o.infblock: h.infutil +o.infcodes: c.infcodes +o.infcodes: h.zutil +o.infcodes: h.zlib +o.infcodes: h.zconf +o.infcodes: h.inftrees +o.infcodes: h.infblock +o.infcodes: h.infcodes +o.infcodes: h.infutil +o.infcodes: h.inffast +o.inffast: c.inffast +o.inffast: h.zutil +o.inffast: h.zlib +o.inffast: h.zconf +o.inffast: h.inftrees +o.inffast: h.infblock +o.inffast: h.infcodes +o.inffast: h.infutil +o.inffast: h.inffast +o.inflate: c.inflate +o.inflate: h.zutil +o.inflate: h.zlib +o.inflate: h.zconf +o.inflate: h.infblock +o.inftrees: c.inftrees +o.inftrees: h.zutil +o.inftrees: h.zlib +o.inftrees: h.zconf +o.inftrees: h.inftrees +o.inftrees: h.inffixed +o.infutil: c.infutil +o.infutil: h.zutil +o.infutil: h.zlib +o.infutil: h.zconf +o.infutil: h.infblock +o.infutil: h.inftrees +o.infutil: h.infcodes +o.infutil: h.infutil +o.trees: c.trees +o.trees: h.deflate +o.trees: h.zutil +o.trees: h.zlib +o.trees: h.zconf +o.trees: h.trees +o.uncompr: c.uncompr +o.uncompr: h.zlib +o.uncompr: h.zconf +o.zutil: c.zutil +o.zutil: h.zutil +o.zutil: h.zlib +o.zutil: h.zconf diff --git a/software/scsi2sd-util/zlib-1.2.8/old/README b/software/scsi2sd-util/zlib-1.2.8/old/README new file mode 100644 index 0000000..800bf07 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/old/README @@ -0,0 +1,3 @@ +This directory contains files that have not been updated for zlib 1.2.x + +(Volunteers are encouraged to help clean this up. Thanks.) diff --git a/software/scsi2sd-util/zlib-1.2.8/old/descrip.mms b/software/scsi2sd-util/zlib-1.2.8/old/descrip.mms new file mode 100644 index 0000000..7066da5 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/old/descrip.mms @@ -0,0 +1,48 @@ +# descrip.mms: MMS description file for building zlib on VMS +# written by Martin P.J. Zinser + +cc_defs = +c_deb = + +.ifdef __DECC__ +pref = /prefix=all +.endif + +OBJS = adler32.obj, compress.obj, crc32.obj, gzio.obj, uncompr.obj,\ + deflate.obj, trees.obj, zutil.obj, inflate.obj, infblock.obj,\ + inftrees.obj, infcodes.obj, infutil.obj, inffast.obj + +CFLAGS= $(C_DEB) $(CC_DEFS) $(PREF) + +all : example.exe minigzip.exe + @ write sys$output " Example applications available" +libz.olb : libz.olb($(OBJS)) + @ write sys$output " libz available" + +example.exe : example.obj libz.olb + link example,libz.olb/lib + +minigzip.exe : minigzip.obj libz.olb + link minigzip,libz.olb/lib,x11vms:xvmsutils.olb/lib + +clean : + delete *.obj;*,libz.olb;* + + +# Other dependencies. +adler32.obj : zutil.h zlib.h zconf.h +compress.obj : zlib.h zconf.h +crc32.obj : zutil.h zlib.h zconf.h +deflate.obj : deflate.h zutil.h zlib.h zconf.h +example.obj : zlib.h zconf.h +gzio.obj : zutil.h zlib.h zconf.h +infblock.obj : zutil.h zlib.h zconf.h infblock.h inftrees.h infcodes.h infutil.h +infcodes.obj : zutil.h zlib.h zconf.h inftrees.h infutil.h infcodes.h inffast.h +inffast.obj : zutil.h zlib.h zconf.h inftrees.h infutil.h inffast.h +inflate.obj : zutil.h zlib.h zconf.h infblock.h +inftrees.obj : zutil.h zlib.h zconf.h inftrees.h +infutil.obj : zutil.h zlib.h zconf.h inftrees.h infutil.h +minigzip.obj : zlib.h zconf.h +trees.obj : deflate.h zutil.h zlib.h zconf.h +uncompr.obj : zlib.h zconf.h +zutil.obj : zutil.h zlib.h zconf.h diff --git a/software/scsi2sd-util/zlib-1.2.8/old/os2/Makefile.os2 b/software/scsi2sd-util/zlib-1.2.8/old/os2/Makefile.os2 new file mode 100644 index 0000000..a105aaa --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/old/os2/Makefile.os2 @@ -0,0 +1,136 @@ +# Makefile for zlib under OS/2 using GCC (PGCC) +# For conditions of distribution and use, see copyright notice in zlib.h + +# To compile and test, type: +# cp Makefile.os2 .. +# cd .. +# make -f Makefile.os2 test + +# This makefile will build a static library z.lib, a shared library +# z.dll and a import library zdll.lib. You can use either z.lib or +# zdll.lib by specifying either -lz or -lzdll on gcc's command line + +CC=gcc -Zomf -s + +CFLAGS=-O6 -Wall +#CFLAGS=-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7 +#CFLAGS=-g -DDEBUG +#CFLAGS=-O3 -Wall -Wwrite-strings -Wpointer-arith -Wconversion \ +# -Wstrict-prototypes -Wmissing-prototypes + +#################### BUG WARNING: ##################### +## infcodes.c hits a bug in pgcc-1.0, so you have to use either +## -O# where # <= 4 or one of (-fno-ommit-frame-pointer or -fno-force-mem) +## This bug is reportedly fixed in pgcc >1.0, but this was not tested +CFLAGS+=-fno-force-mem + +LDFLAGS=-s -L. -lzdll -Zcrtdll +LDSHARED=$(CC) -s -Zomf -Zdll -Zcrtdll + +VER=1.1.0 +ZLIB=z.lib +SHAREDLIB=z.dll +SHAREDLIBIMP=zdll.lib +LIBS=$(ZLIB) $(SHAREDLIB) $(SHAREDLIBIMP) + +AR=emxomfar cr +IMPLIB=emximp +RANLIB=echo +TAR=tar +SHELL=bash + +prefix=/usr/local +exec_prefix = $(prefix) + +OBJS = adler32.o compress.o crc32.o gzio.o uncompr.o deflate.o trees.o \ + zutil.o inflate.o infblock.o inftrees.o infcodes.o infutil.o inffast.o + +TEST_OBJS = example.o minigzip.o + +DISTFILES = README INDEX ChangeLog configure Make*[a-z0-9] *.[ch] descrip.mms \ + algorithm.txt zlib.3 msdos/Make*[a-z0-9] msdos/zlib.def msdos/zlib.rc \ + nt/Makefile.nt nt/zlib.dnt contrib/README.contrib contrib/*.txt \ + contrib/asm386/*.asm contrib/asm386/*.c \ + contrib/asm386/*.bat contrib/asm386/zlibvc.d?? contrib/iostream/*.cpp \ + contrib/iostream/*.h contrib/iostream2/*.h contrib/iostream2/*.cpp \ + contrib/untgz/Makefile contrib/untgz/*.c contrib/untgz/*.w32 + +all: example.exe minigzip.exe + +test: all + @LD_LIBRARY_PATH=.:$(LD_LIBRARY_PATH) ; export LD_LIBRARY_PATH; \ + echo hello world | ./minigzip | ./minigzip -d || \ + echo ' *** minigzip test FAILED ***' ; \ + if ./example; then \ + echo ' *** zlib test OK ***'; \ + else \ + echo ' *** zlib test FAILED ***'; \ + fi + +$(ZLIB): $(OBJS) + $(AR) $@ $(OBJS) + -@ ($(RANLIB) $@ || true) >/dev/null 2>&1 + +$(SHAREDLIB): $(OBJS) os2/z.def + $(LDSHARED) -o $@ $^ + +$(SHAREDLIBIMP): os2/z.def + $(IMPLIB) -o $@ $^ + +example.exe: example.o $(LIBS) + $(CC) $(CFLAGS) -o $@ example.o $(LDFLAGS) + +minigzip.exe: minigzip.o $(LIBS) + $(CC) $(CFLAGS) -o $@ minigzip.o $(LDFLAGS) + +clean: + rm -f *.o *~ example minigzip libz.a libz.so* foo.gz + +distclean: clean + +zip: + mv Makefile Makefile~; cp -p Makefile.in Makefile + rm -f test.c ztest*.c + v=`sed -n -e 's/\.//g' -e '/VERSION "/s/.*"\(.*\)".*/\1/p' < zlib.h`;\ + zip -ul9 zlib$$v $(DISTFILES) + mv Makefile~ Makefile + +dist: + mv Makefile Makefile~; cp -p Makefile.in Makefile + rm -f test.c ztest*.c + d=zlib-`sed -n '/VERSION "/s/.*"\(.*\)".*/\1/p' < zlib.h`;\ + rm -f $$d.tar.gz; \ + if test ! -d ../$$d; then rm -f ../$$d; ln -s `pwd` ../$$d; fi; \ + files=""; \ + for f in $(DISTFILES); do files="$$files $$d/$$f"; done; \ + cd ..; \ + GZIP=-9 $(TAR) chofz $$d/$$d.tar.gz $$files; \ + if test ! -d $$d; then rm -f $$d; fi + mv Makefile~ Makefile + +tags: + etags *.[ch] + +depend: + makedepend -- $(CFLAGS) -- *.[ch] + +# DO NOT DELETE THIS LINE -- make depend depends on it. + +adler32.o: zlib.h zconf.h +compress.o: zlib.h zconf.h +crc32.o: zlib.h zconf.h +deflate.o: deflate.h zutil.h zlib.h zconf.h +example.o: zlib.h zconf.h +gzio.o: zutil.h zlib.h zconf.h +infblock.o: infblock.h inftrees.h infcodes.h infutil.h zutil.h zlib.h zconf.h +infcodes.o: zutil.h zlib.h zconf.h +infcodes.o: inftrees.h infblock.h infcodes.h infutil.h inffast.h +inffast.o: zutil.h zlib.h zconf.h inftrees.h +inffast.o: infblock.h infcodes.h infutil.h inffast.h +inflate.o: zutil.h zlib.h zconf.h infblock.h +inftrees.o: zutil.h zlib.h zconf.h inftrees.h +infutil.o: zutil.h zlib.h zconf.h infblock.h inftrees.h infcodes.h infutil.h +minigzip.o: zlib.h zconf.h +trees.o: deflate.h zutil.h zlib.h zconf.h trees.h +uncompr.o: zlib.h zconf.h +zutil.o: zutil.h zlib.h zconf.h diff --git a/software/scsi2sd-util/zlib-1.2.8/old/os2/zlib.def b/software/scsi2sd-util/zlib-1.2.8/old/os2/zlib.def new file mode 100644 index 0000000..4c753f1 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/old/os2/zlib.def @@ -0,0 +1,51 @@ +; +; Slightly modified version of ../nt/zlib.dnt :-) +; + +LIBRARY Z +DESCRIPTION "Zlib compression library for OS/2" +CODE PRELOAD MOVEABLE DISCARDABLE +DATA PRELOAD MOVEABLE MULTIPLE + +EXPORTS + adler32 + compress + crc32 + deflate + deflateCopy + deflateEnd + deflateInit2_ + deflateInit_ + deflateParams + deflateReset + deflateSetDictionary + gzclose + gzdopen + gzerror + gzflush + gzopen + gzread + gzwrite + inflate + inflateEnd + inflateInit2_ + inflateInit_ + inflateReset + inflateSetDictionary + inflateSync + uncompress + zlibVersion + gzprintf + gzputc + gzgetc + gzseek + gzrewind + gztell + gzeof + gzsetparams + zError + inflateSyncPoint + get_crc_table + compress2 + gzputs + gzgets diff --git a/software/scsi2sd-util/zlib-1.2.8/old/visual-basic.txt b/software/scsi2sd-util/zlib-1.2.8/old/visual-basic.txt new file mode 100644 index 0000000..57efe58 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/old/visual-basic.txt @@ -0,0 +1,160 @@ +See below some functions declarations for Visual Basic. + +Frequently Asked Question: + +Q: Each time I use the compress function I get the -5 error (not enough + room in the output buffer). + +A: Make sure that the length of the compressed buffer is passed by + reference ("as any"), not by value ("as long"). Also check that + before the call of compress this length is equal to the total size of + the compressed buffer and not zero. + + +From: "Jon Caruana" +Subject: Re: How to port zlib declares to vb? +Date: Mon, 28 Oct 1996 18:33:03 -0600 + +Got the answer! (I haven't had time to check this but it's what I got, and +looks correct): + +He has the following routines working: + compress + uncompress + gzopen + gzwrite + gzread + gzclose + +Declares follow: (Quoted from Carlos Rios , in Vb4 form) + +#If Win16 Then 'Use Win16 calls. +Declare Function compress Lib "ZLIB.DLL" (ByVal compr As + String, comprLen As Any, ByVal buf As String, ByVal buflen + As Long) As Integer +Declare Function uncompress Lib "ZLIB.DLL" (ByVal uncompr + As String, uncomprLen As Any, ByVal compr As String, ByVal + lcompr As Long) As Integer +Declare Function gzopen Lib "ZLIB.DLL" (ByVal filePath As + String, ByVal mode As String) As Long +Declare Function gzread Lib "ZLIB.DLL" (ByVal file As + Long, ByVal uncompr As String, ByVal uncomprLen As Integer) + As Integer +Declare Function gzwrite Lib "ZLIB.DLL" (ByVal file As + Long, ByVal uncompr As String, ByVal uncomprLen As Integer) + As Integer +Declare Function gzclose Lib "ZLIB.DLL" (ByVal file As + Long) As Integer +#Else +Declare Function compress Lib "ZLIB32.DLL" + (ByVal compr As String, comprLen As Any, ByVal buf As + String, ByVal buflen As Long) As Integer +Declare Function uncompress Lib "ZLIB32.DLL" + (ByVal uncompr As String, uncomprLen As Any, ByVal compr As + String, ByVal lcompr As Long) As Long +Declare Function gzopen Lib "ZLIB32.DLL" + (ByVal file As String, ByVal mode As String) As Long +Declare Function gzread Lib "ZLIB32.DLL" + (ByVal file As Long, ByVal uncompr As String, ByVal + uncomprLen As Long) As Long +Declare Function gzwrite Lib "ZLIB32.DLL" + (ByVal file As Long, ByVal uncompr As String, ByVal + uncomprLen As Long) As Long +Declare Function gzclose Lib "ZLIB32.DLL" + (ByVal file As Long) As Long +#End If + +-Jon Caruana +jon-net@usa.net +Microsoft Sitebuilder Network Level 1 Member - HTML Writer's Guild Member + + +Here is another example from Michael that he +says conforms to the VB guidelines, and that solves the problem of not +knowing the uncompressed size by storing it at the end of the file: + +'Calling the functions: +'bracket meaning: [optional] {Range of possible values} +'Call subCompressFile( [, , [level of compression {1..9}]]) +'Call subUncompressFile() + +Option Explicit +Private lngpvtPcnSml As Long 'Stores value for 'lngPercentSmaller' +Private Const SUCCESS As Long = 0 +Private Const strFilExt As String = ".cpr" +Private Declare Function lngfncCpr Lib "zlib.dll" Alias "compress2" (ByRef +dest As Any, ByRef destLen As Any, ByRef src As Any, ByVal srcLen As Long, +ByVal level As Integer) As Long +Private Declare Function lngfncUcp Lib "zlib.dll" Alias "uncompress" (ByRef +dest As Any, ByRef destLen As Any, ByRef src As Any, ByVal srcLen As Long) +As Long + +Public Sub subCompressFile(ByVal strargOriFilPth As String, Optional ByVal +strargCprFilPth As String, Optional ByVal intLvl As Integer = 9) + Dim strCprPth As String + Dim lngOriSiz As Long + Dim lngCprSiz As Long + Dim bytaryOri() As Byte + Dim bytaryCpr() As Byte + lngOriSiz = FileLen(strargOriFilPth) + ReDim bytaryOri(lngOriSiz - 1) + Open strargOriFilPth For Binary Access Read As #1 + Get #1, , bytaryOri() + Close #1 + strCprPth = IIf(strargCprFilPth = "", strargOriFilPth, strargCprFilPth) +'Select file path and name + strCprPth = strCprPth & IIf(Right(strCprPth, Len(strFilExt)) = +strFilExt, "", strFilExt) 'Add file extension if not exists + lngCprSiz = (lngOriSiz * 1.01) + 12 'Compression needs temporary a bit +more space then original file size + ReDim bytaryCpr(lngCprSiz - 1) + If lngfncCpr(bytaryCpr(0), lngCprSiz, bytaryOri(0), lngOriSiz, intLvl) = +SUCCESS Then + lngpvtPcnSml = (1# - (lngCprSiz / lngOriSiz)) * 100 + ReDim Preserve bytaryCpr(lngCprSiz - 1) + Open strCprPth For Binary Access Write As #1 + Put #1, , bytaryCpr() + Put #1, , lngOriSiz 'Add the the original size value to the end +(last 4 bytes) + Close #1 + Else + MsgBox "Compression error" + End If + Erase bytaryCpr + Erase bytaryOri +End Sub + +Public Sub subUncompressFile(ByVal strargFilPth As String) + Dim bytaryCpr() As Byte + Dim bytaryOri() As Byte + Dim lngOriSiz As Long + Dim lngCprSiz As Long + Dim strOriPth As String + lngCprSiz = FileLen(strargFilPth) + ReDim bytaryCpr(lngCprSiz - 1) + Open strargFilPth For Binary Access Read As #1 + Get #1, , bytaryCpr() + Close #1 + 'Read the original file size value: + lngOriSiz = bytaryCpr(lngCprSiz - 1) * (2 ^ 24) _ + + bytaryCpr(lngCprSiz - 2) * (2 ^ 16) _ + + bytaryCpr(lngCprSiz - 3) * (2 ^ 8) _ + + bytaryCpr(lngCprSiz - 4) + ReDim Preserve bytaryCpr(lngCprSiz - 5) 'Cut of the original size value + ReDim bytaryOri(lngOriSiz - 1) + If lngfncUcp(bytaryOri(0), lngOriSiz, bytaryCpr(0), lngCprSiz) = SUCCESS +Then + strOriPth = Left(strargFilPth, Len(strargFilPth) - Len(strFilExt)) + Open strOriPth For Binary Access Write As #1 + Put #1, , bytaryOri() + Close #1 + Else + MsgBox "Uncompression error" + End If + Erase bytaryCpr + Erase bytaryOri +End Sub +Public Property Get lngPercentSmaller() As Long + lngPercentSmaller = lngpvtPcnSml +End Property diff --git a/software/scsi2sd-util/zlib-1.2.8/qnx/package.qpg b/software/scsi2sd-util/zlib-1.2.8/qnx/package.qpg new file mode 100644 index 0000000..aebf6e3 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/qnx/package.qpg @@ -0,0 +1,141 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Library + + Medium + + 2.0 + + + + zlib + zlib + alain.bonnefoy@icbt.com + Public + public + www.gzip.org/zlib + + + Jean-Loup Gailly,Mark Adler + www.gzip.org/zlib + + zlib@gzip.org + + + A massively spiffy yet delicately unobtrusive compression library. + zlib is designed to be a free, general-purpose, legally unencumbered, lossless data compression library for use on virtually any computer hardware and operating system. + http://www.gzip.org/zlib + + + + + 1.2.8 + Medium + Stable + + + + + + + No License + + + + Software Development/Libraries and Extensions/C Libraries + zlib,compression + qnx6 + qnx6 + None + Developer + + + + + + + + + + + + + + Install + Post + No + Ignore + + No + Optional + + + + + + + + + + + + + InstallOver + zlib + + + + + + + + + + + + + InstallOver + zlib-dev + + + + + + + + + diff --git a/software/scsi2sd-util/zlib-1.2.8/test/example.c b/software/scsi2sd-util/zlib-1.2.8/test/example.c new file mode 100644 index 0000000..138a699 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/test/example.c @@ -0,0 +1,601 @@ +/* example.c -- usage example of the zlib compression library + * Copyright (C) 1995-2006, 2011 Jean-loup Gailly. + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* @(#) $Id$ */ + +#include "zlib.h" +#include + +#ifdef STDC +# include +# include +#endif + +#if defined(VMS) || defined(RISCOS) +# define TESTFILE "foo-gz" +#else +# define TESTFILE "foo.gz" +#endif + +#define CHECK_ERR(err, msg) { \ + if (err != Z_OK) { \ + fprintf(stderr, "%s error: %d\n", msg, err); \ + exit(1); \ + } \ +} + +z_const char hello[] = "hello, hello!"; +/* "hello world" would be more standard, but the repeated "hello" + * stresses the compression code better, sorry... + */ + +const char dictionary[] = "hello"; +uLong dictId; /* Adler32 value of the dictionary */ + +void test_deflate OF((Byte *compr, uLong comprLen)); +void test_inflate OF((Byte *compr, uLong comprLen, + Byte *uncompr, uLong uncomprLen)); +void test_large_deflate OF((Byte *compr, uLong comprLen, + Byte *uncompr, uLong uncomprLen)); +void test_large_inflate OF((Byte *compr, uLong comprLen, + Byte *uncompr, uLong uncomprLen)); +void test_flush OF((Byte *compr, uLong *comprLen)); +void test_sync OF((Byte *compr, uLong comprLen, + Byte *uncompr, uLong uncomprLen)); +void test_dict_deflate OF((Byte *compr, uLong comprLen)); +void test_dict_inflate OF((Byte *compr, uLong comprLen, + Byte *uncompr, uLong uncomprLen)); +int main OF((int argc, char *argv[])); + + +#ifdef Z_SOLO + +void *myalloc OF((void *, unsigned, unsigned)); +void myfree OF((void *, void *)); + +void *myalloc(q, n, m) + void *q; + unsigned n, m; +{ + q = Z_NULL; + return calloc(n, m); +} + +void myfree(void *q, void *p) +{ + q = Z_NULL; + free(p); +} + +static alloc_func zalloc = myalloc; +static free_func zfree = myfree; + +#else /* !Z_SOLO */ + +static alloc_func zalloc = (alloc_func)0; +static free_func zfree = (free_func)0; + +void test_compress OF((Byte *compr, uLong comprLen, + Byte *uncompr, uLong uncomprLen)); +void test_gzio OF((const char *fname, + Byte *uncompr, uLong uncomprLen)); + +/* =========================================================================== + * Test compress() and uncompress() + */ +void test_compress(compr, comprLen, uncompr, uncomprLen) + Byte *compr, *uncompr; + uLong comprLen, uncomprLen; +{ + int err; + uLong len = (uLong)strlen(hello)+1; + + err = compress(compr, &comprLen, (const Bytef*)hello, len); + CHECK_ERR(err, "compress"); + + strcpy((char*)uncompr, "garbage"); + + err = uncompress(uncompr, &uncomprLen, compr, comprLen); + CHECK_ERR(err, "uncompress"); + + if (strcmp((char*)uncompr, hello)) { + fprintf(stderr, "bad uncompress\n"); + exit(1); + } else { + printf("uncompress(): %s\n", (char *)uncompr); + } +} + +/* =========================================================================== + * Test read/write of .gz files + */ +void test_gzio(fname, uncompr, uncomprLen) + const char *fname; /* compressed file name */ + Byte *uncompr; + uLong uncomprLen; +{ +#ifdef NO_GZCOMPRESS + fprintf(stderr, "NO_GZCOMPRESS -- gz* functions cannot compress\n"); +#else + int err; + int len = (int)strlen(hello)+1; + gzFile file; + z_off_t pos; + + file = gzopen(fname, "wb"); + if (file == NULL) { + fprintf(stderr, "gzopen error\n"); + exit(1); + } + gzputc(file, 'h'); + if (gzputs(file, "ello") != 4) { + fprintf(stderr, "gzputs err: %s\n", gzerror(file, &err)); + exit(1); + } + if (gzprintf(file, ", %s!", "hello") != 8) { + fprintf(stderr, "gzprintf err: %s\n", gzerror(file, &err)); + exit(1); + } + gzseek(file, 1L, SEEK_CUR); /* add one zero byte */ + gzclose(file); + + file = gzopen(fname, "rb"); + if (file == NULL) { + fprintf(stderr, "gzopen error\n"); + exit(1); + } + strcpy((char*)uncompr, "garbage"); + + if (gzread(file, uncompr, (unsigned)uncomprLen) != len) { + fprintf(stderr, "gzread err: %s\n", gzerror(file, &err)); + exit(1); + } + if (strcmp((char*)uncompr, hello)) { + fprintf(stderr, "bad gzread: %s\n", (char*)uncompr); + exit(1); + } else { + printf("gzread(): %s\n", (char*)uncompr); + } + + pos = gzseek(file, -8L, SEEK_CUR); + if (pos != 6 || gztell(file) != pos) { + fprintf(stderr, "gzseek error, pos=%ld, gztell=%ld\n", + (long)pos, (long)gztell(file)); + exit(1); + } + + if (gzgetc(file) != ' ') { + fprintf(stderr, "gzgetc error\n"); + exit(1); + } + + if (gzungetc(' ', file) != ' ') { + fprintf(stderr, "gzungetc error\n"); + exit(1); + } + + gzgets(file, (char*)uncompr, (int)uncomprLen); + if (strlen((char*)uncompr) != 7) { /* " hello!" */ + fprintf(stderr, "gzgets err after gzseek: %s\n", gzerror(file, &err)); + exit(1); + } + if (strcmp((char*)uncompr, hello + 6)) { + fprintf(stderr, "bad gzgets after gzseek\n"); + exit(1); + } else { + printf("gzgets() after gzseek: %s\n", (char*)uncompr); + } + + gzclose(file); +#endif +} + +#endif /* Z_SOLO */ + +/* =========================================================================== + * Test deflate() with small buffers + */ +void test_deflate(compr, comprLen) + Byte *compr; + uLong comprLen; +{ + z_stream c_stream; /* compression stream */ + int err; + uLong len = (uLong)strlen(hello)+1; + + c_stream.zalloc = zalloc; + c_stream.zfree = zfree; + c_stream.opaque = (voidpf)0; + + err = deflateInit(&c_stream, Z_DEFAULT_COMPRESSION); + CHECK_ERR(err, "deflateInit"); + + c_stream.next_in = (z_const unsigned char *)hello; + c_stream.next_out = compr; + + while (c_stream.total_in != len && c_stream.total_out < comprLen) { + c_stream.avail_in = c_stream.avail_out = 1; /* force small buffers */ + err = deflate(&c_stream, Z_NO_FLUSH); + CHECK_ERR(err, "deflate"); + } + /* Finish the stream, still forcing small buffers: */ + for (;;) { + c_stream.avail_out = 1; + err = deflate(&c_stream, Z_FINISH); + if (err == Z_STREAM_END) break; + CHECK_ERR(err, "deflate"); + } + + err = deflateEnd(&c_stream); + CHECK_ERR(err, "deflateEnd"); +} + +/* =========================================================================== + * Test inflate() with small buffers + */ +void test_inflate(compr, comprLen, uncompr, uncomprLen) + Byte *compr, *uncompr; + uLong comprLen, uncomprLen; +{ + int err; + z_stream d_stream; /* decompression stream */ + + strcpy((char*)uncompr, "garbage"); + + d_stream.zalloc = zalloc; + d_stream.zfree = zfree; + d_stream.opaque = (voidpf)0; + + d_stream.next_in = compr; + d_stream.avail_in = 0; + d_stream.next_out = uncompr; + + err = inflateInit(&d_stream); + CHECK_ERR(err, "inflateInit"); + + while (d_stream.total_out < uncomprLen && d_stream.total_in < comprLen) { + d_stream.avail_in = d_stream.avail_out = 1; /* force small buffers */ + err = inflate(&d_stream, Z_NO_FLUSH); + if (err == Z_STREAM_END) break; + CHECK_ERR(err, "inflate"); + } + + err = inflateEnd(&d_stream); + CHECK_ERR(err, "inflateEnd"); + + if (strcmp((char*)uncompr, hello)) { + fprintf(stderr, "bad inflate\n"); + exit(1); + } else { + printf("inflate(): %s\n", (char *)uncompr); + } +} + +/* =========================================================================== + * Test deflate() with large buffers and dynamic change of compression level + */ +void test_large_deflate(compr, comprLen, uncompr, uncomprLen) + Byte *compr, *uncompr; + uLong comprLen, uncomprLen; +{ + z_stream c_stream; /* compression stream */ + int err; + + c_stream.zalloc = zalloc; + c_stream.zfree = zfree; + c_stream.opaque = (voidpf)0; + + err = deflateInit(&c_stream, Z_BEST_SPEED); + CHECK_ERR(err, "deflateInit"); + + c_stream.next_out = compr; + c_stream.avail_out = (uInt)comprLen; + + /* At this point, uncompr is still mostly zeroes, so it should compress + * very well: + */ + c_stream.next_in = uncompr; + c_stream.avail_in = (uInt)uncomprLen; + err = deflate(&c_stream, Z_NO_FLUSH); + CHECK_ERR(err, "deflate"); + if (c_stream.avail_in != 0) { + fprintf(stderr, "deflate not greedy\n"); + exit(1); + } + + /* Feed in already compressed data and switch to no compression: */ + deflateParams(&c_stream, Z_NO_COMPRESSION, Z_DEFAULT_STRATEGY); + c_stream.next_in = compr; + c_stream.avail_in = (uInt)comprLen/2; + err = deflate(&c_stream, Z_NO_FLUSH); + CHECK_ERR(err, "deflate"); + + /* Switch back to compressing mode: */ + deflateParams(&c_stream, Z_BEST_COMPRESSION, Z_FILTERED); + c_stream.next_in = uncompr; + c_stream.avail_in = (uInt)uncomprLen; + err = deflate(&c_stream, Z_NO_FLUSH); + CHECK_ERR(err, "deflate"); + + err = deflate(&c_stream, Z_FINISH); + if (err != Z_STREAM_END) { + fprintf(stderr, "deflate should report Z_STREAM_END\n"); + exit(1); + } + err = deflateEnd(&c_stream); + CHECK_ERR(err, "deflateEnd"); +} + +/* =========================================================================== + * Test inflate() with large buffers + */ +void test_large_inflate(compr, comprLen, uncompr, uncomprLen) + Byte *compr, *uncompr; + uLong comprLen, uncomprLen; +{ + int err; + z_stream d_stream; /* decompression stream */ + + strcpy((char*)uncompr, "garbage"); + + d_stream.zalloc = zalloc; + d_stream.zfree = zfree; + d_stream.opaque = (voidpf)0; + + d_stream.next_in = compr; + d_stream.avail_in = (uInt)comprLen; + + err = inflateInit(&d_stream); + CHECK_ERR(err, "inflateInit"); + + for (;;) { + d_stream.next_out = uncompr; /* discard the output */ + d_stream.avail_out = (uInt)uncomprLen; + err = inflate(&d_stream, Z_NO_FLUSH); + if (err == Z_STREAM_END) break; + CHECK_ERR(err, "large inflate"); + } + + err = inflateEnd(&d_stream); + CHECK_ERR(err, "inflateEnd"); + + if (d_stream.total_out != 2*uncomprLen + comprLen/2) { + fprintf(stderr, "bad large inflate: %ld\n", d_stream.total_out); + exit(1); + } else { + printf("large_inflate(): OK\n"); + } +} + +/* =========================================================================== + * Test deflate() with full flush + */ +void test_flush(compr, comprLen) + Byte *compr; + uLong *comprLen; +{ + z_stream c_stream; /* compression stream */ + int err; + uInt len = (uInt)strlen(hello)+1; + + c_stream.zalloc = zalloc; + c_stream.zfree = zfree; + c_stream.opaque = (voidpf)0; + + err = deflateInit(&c_stream, Z_DEFAULT_COMPRESSION); + CHECK_ERR(err, "deflateInit"); + + c_stream.next_in = (z_const unsigned char *)hello; + c_stream.next_out = compr; + c_stream.avail_in = 3; + c_stream.avail_out = (uInt)*comprLen; + err = deflate(&c_stream, Z_FULL_FLUSH); + CHECK_ERR(err, "deflate"); + + compr[3]++; /* force an error in first compressed block */ + c_stream.avail_in = len - 3; + + err = deflate(&c_stream, Z_FINISH); + if (err != Z_STREAM_END) { + CHECK_ERR(err, "deflate"); + } + err = deflateEnd(&c_stream); + CHECK_ERR(err, "deflateEnd"); + + *comprLen = c_stream.total_out; +} + +/* =========================================================================== + * Test inflateSync() + */ +void test_sync(compr, comprLen, uncompr, uncomprLen) + Byte *compr, *uncompr; + uLong comprLen, uncomprLen; +{ + int err; + z_stream d_stream; /* decompression stream */ + + strcpy((char*)uncompr, "garbage"); + + d_stream.zalloc = zalloc; + d_stream.zfree = zfree; + d_stream.opaque = (voidpf)0; + + d_stream.next_in = compr; + d_stream.avail_in = 2; /* just read the zlib header */ + + err = inflateInit(&d_stream); + CHECK_ERR(err, "inflateInit"); + + d_stream.next_out = uncompr; + d_stream.avail_out = (uInt)uncomprLen; + + inflate(&d_stream, Z_NO_FLUSH); + CHECK_ERR(err, "inflate"); + + d_stream.avail_in = (uInt)comprLen-2; /* read all compressed data */ + err = inflateSync(&d_stream); /* but skip the damaged part */ + CHECK_ERR(err, "inflateSync"); + + err = inflate(&d_stream, Z_FINISH); + if (err != Z_DATA_ERROR) { + fprintf(stderr, "inflate should report DATA_ERROR\n"); + /* Because of incorrect adler32 */ + exit(1); + } + err = inflateEnd(&d_stream); + CHECK_ERR(err, "inflateEnd"); + + printf("after inflateSync(): hel%s\n", (char *)uncompr); +} + +/* =========================================================================== + * Test deflate() with preset dictionary + */ +void test_dict_deflate(compr, comprLen) + Byte *compr; + uLong comprLen; +{ + z_stream c_stream; /* compression stream */ + int err; + + c_stream.zalloc = zalloc; + c_stream.zfree = zfree; + c_stream.opaque = (voidpf)0; + + err = deflateInit(&c_stream, Z_BEST_COMPRESSION); + CHECK_ERR(err, "deflateInit"); + + err = deflateSetDictionary(&c_stream, + (const Bytef*)dictionary, (int)sizeof(dictionary)); + CHECK_ERR(err, "deflateSetDictionary"); + + dictId = c_stream.adler; + c_stream.next_out = compr; + c_stream.avail_out = (uInt)comprLen; + + c_stream.next_in = (z_const unsigned char *)hello; + c_stream.avail_in = (uInt)strlen(hello)+1; + + err = deflate(&c_stream, Z_FINISH); + if (err != Z_STREAM_END) { + fprintf(stderr, "deflate should report Z_STREAM_END\n"); + exit(1); + } + err = deflateEnd(&c_stream); + CHECK_ERR(err, "deflateEnd"); +} + +/* =========================================================================== + * Test inflate() with a preset dictionary + */ +void test_dict_inflate(compr, comprLen, uncompr, uncomprLen) + Byte *compr, *uncompr; + uLong comprLen, uncomprLen; +{ + int err; + z_stream d_stream; /* decompression stream */ + + strcpy((char*)uncompr, "garbage"); + + d_stream.zalloc = zalloc; + d_stream.zfree = zfree; + d_stream.opaque = (voidpf)0; + + d_stream.next_in = compr; + d_stream.avail_in = (uInt)comprLen; + + err = inflateInit(&d_stream); + CHECK_ERR(err, "inflateInit"); + + d_stream.next_out = uncompr; + d_stream.avail_out = (uInt)uncomprLen; + + for (;;) { + err = inflate(&d_stream, Z_NO_FLUSH); + if (err == Z_STREAM_END) break; + if (err == Z_NEED_DICT) { + if (d_stream.adler != dictId) { + fprintf(stderr, "unexpected dictionary"); + exit(1); + } + err = inflateSetDictionary(&d_stream, (const Bytef*)dictionary, + (int)sizeof(dictionary)); + } + CHECK_ERR(err, "inflate with dict"); + } + + err = inflateEnd(&d_stream); + CHECK_ERR(err, "inflateEnd"); + + if (strcmp((char*)uncompr, hello)) { + fprintf(stderr, "bad inflate with dict\n"); + exit(1); + } else { + printf("inflate with dictionary: %s\n", (char *)uncompr); + } +} + +/* =========================================================================== + * Usage: example [output.gz [input.gz]] + */ + +int main(argc, argv) + int argc; + char *argv[]; +{ + Byte *compr, *uncompr; + uLong comprLen = 10000*sizeof(int); /* don't overflow on MSDOS */ + uLong uncomprLen = comprLen; + static const char* myVersion = ZLIB_VERSION; + + if (zlibVersion()[0] != myVersion[0]) { + fprintf(stderr, "incompatible zlib version\n"); + exit(1); + + } else if (strcmp(zlibVersion(), ZLIB_VERSION) != 0) { + fprintf(stderr, "warning: different zlib version\n"); + } + + printf("zlib version %s = 0x%04x, compile flags = 0x%lx\n", + ZLIB_VERSION, ZLIB_VERNUM, zlibCompileFlags()); + + compr = (Byte*)calloc((uInt)comprLen, 1); + uncompr = (Byte*)calloc((uInt)uncomprLen, 1); + /* compr and uncompr are cleared to avoid reading uninitialized + * data and to ensure that uncompr compresses well. + */ + if (compr == Z_NULL || uncompr == Z_NULL) { + printf("out of memory\n"); + exit(1); + } + +#ifdef Z_SOLO + argc = strlen(argv[0]); +#else + test_compress(compr, comprLen, uncompr, uncomprLen); + + test_gzio((argc > 1 ? argv[1] : TESTFILE), + uncompr, uncomprLen); +#endif + + test_deflate(compr, comprLen); + test_inflate(compr, comprLen, uncompr, uncomprLen); + + test_large_deflate(compr, comprLen, uncompr, uncomprLen); + test_large_inflate(compr, comprLen, uncompr, uncomprLen); + + test_flush(compr, &comprLen); + test_sync(compr, comprLen, uncompr, uncomprLen); + comprLen = uncomprLen; + + test_dict_deflate(compr, comprLen); + test_dict_inflate(compr, comprLen, uncompr, uncomprLen); + + free(compr); + free(uncompr); + + return 0; +} diff --git a/software/scsi2sd-util/zlib-1.2.8/test/infcover.c b/software/scsi2sd-util/zlib-1.2.8/test/infcover.c new file mode 100644 index 0000000..fe3d920 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/test/infcover.c @@ -0,0 +1,671 @@ +/* infcover.c -- test zlib's inflate routines with full code coverage + * Copyright (C) 2011 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* to use, do: ./configure --cover && make cover */ + +#include +#include +#include +#include +#include "zlib.h" + +/* get definition of internal structure so we can mess with it (see pull()), + and so we can call inflate_trees() (see cover5()) */ +#define ZLIB_INTERNAL +#include "inftrees.h" +#include "inflate.h" + +#define local static + +/* -- memory tracking routines -- */ + +/* + These memory tracking routines are provided to zlib and track all of zlib's + allocations and deallocations, check for LIFO operations, keep a current + and high water mark of total bytes requested, optionally set a limit on the + total memory that can be allocated, and when done check for memory leaks. + + They are used as follows: + + z_stream strm; + mem_setup(&strm) initializes the memory tracking and sets the + zalloc, zfree, and opaque members of strm to use + memory tracking for all zlib operations on strm + mem_limit(&strm, limit) sets a limit on the total bytes requested -- a + request that exceeds this limit will result in an + allocation failure (returns NULL) -- setting the + limit to zero means no limit, which is the default + after mem_setup() + mem_used(&strm, "msg") prints to stderr "msg" and the total bytes used + mem_high(&strm, "msg") prints to stderr "msg" and the high water mark + mem_done(&strm, "msg") ends memory tracking, releases all allocations + for the tracking as well as leaked zlib blocks, if + any. If there was anything unusual, such as leaked + blocks, non-FIFO frees, or frees of addresses not + allocated, then "msg" and information about the + problem is printed to stderr. If everything is + normal, nothing is printed. mem_done resets the + strm members to Z_NULL to use the default memory + allocation routines on the next zlib initialization + using strm. + */ + +/* these items are strung together in a linked list, one for each allocation */ +struct mem_item { + void *ptr; /* pointer to allocated memory */ + size_t size; /* requested size of allocation */ + struct mem_item *next; /* pointer to next item in list, or NULL */ +}; + +/* this structure is at the root of the linked list, and tracks statistics */ +struct mem_zone { + struct mem_item *first; /* pointer to first item in list, or NULL */ + size_t total, highwater; /* total allocations, and largest total */ + size_t limit; /* memory allocation limit, or 0 if no limit */ + int notlifo, rogue; /* counts of non-LIFO frees and rogue frees */ +}; + +/* memory allocation routine to pass to zlib */ +local void *mem_alloc(void *mem, unsigned count, unsigned size) +{ + void *ptr; + struct mem_item *item; + struct mem_zone *zone = mem; + size_t len = count * (size_t)size; + + /* induced allocation failure */ + if (zone == NULL || (zone->limit && zone->total + len > zone->limit)) + return NULL; + + /* perform allocation using the standard library, fill memory with a + non-zero value to make sure that the code isn't depending on zeros */ + ptr = malloc(len); + if (ptr == NULL) + return NULL; + memset(ptr, 0xa5, len); + + /* create a new item for the list */ + item = malloc(sizeof(struct mem_item)); + if (item == NULL) { + free(ptr); + return NULL; + } + item->ptr = ptr; + item->size = len; + + /* insert item at the beginning of the list */ + item->next = zone->first; + zone->first = item; + + /* update the statistics */ + zone->total += item->size; + if (zone->total > zone->highwater) + zone->highwater = zone->total; + + /* return the allocated memory */ + return ptr; +} + +/* memory free routine to pass to zlib */ +local void mem_free(void *mem, void *ptr) +{ + struct mem_item *item, *next; + struct mem_zone *zone = mem; + + /* if no zone, just do a free */ + if (zone == NULL) { + free(ptr); + return; + } + + /* point next to the item that matches ptr, or NULL if not found -- remove + the item from the linked list if found */ + next = zone->first; + if (next) { + if (next->ptr == ptr) + zone->first = next->next; /* first one is it, remove from list */ + else { + do { /* search the linked list */ + item = next; + next = item->next; + } while (next != NULL && next->ptr != ptr); + if (next) { /* if found, remove from linked list */ + item->next = next->next; + zone->notlifo++; /* not a LIFO free */ + } + + } + } + + /* if found, update the statistics and free the item */ + if (next) { + zone->total -= next->size; + free(next); + } + + /* if not found, update the rogue count */ + else + zone->rogue++; + + /* in any case, do the requested free with the standard library function */ + free(ptr); +} + +/* set up a controlled memory allocation space for monitoring, set the stream + parameters to the controlled routines, with opaque pointing to the space */ +local void mem_setup(z_stream *strm) +{ + struct mem_zone *zone; + + zone = malloc(sizeof(struct mem_zone)); + assert(zone != NULL); + zone->first = NULL; + zone->total = 0; + zone->highwater = 0; + zone->limit = 0; + zone->notlifo = 0; + zone->rogue = 0; + strm->opaque = zone; + strm->zalloc = mem_alloc; + strm->zfree = mem_free; +} + +/* set a limit on the total memory allocation, or 0 to remove the limit */ +local void mem_limit(z_stream *strm, size_t limit) +{ + struct mem_zone *zone = strm->opaque; + + zone->limit = limit; +} + +/* show the current total requested allocations in bytes */ +local void mem_used(z_stream *strm, char *prefix) +{ + struct mem_zone *zone = strm->opaque; + + fprintf(stderr, "%s: %lu allocated\n", prefix, zone->total); +} + +/* show the high water allocation in bytes */ +local void mem_high(z_stream *strm, char *prefix) +{ + struct mem_zone *zone = strm->opaque; + + fprintf(stderr, "%s: %lu high water mark\n", prefix, zone->highwater); +} + +/* release the memory allocation zone -- if there are any surprises, notify */ +local void mem_done(z_stream *strm, char *prefix) +{ + int count = 0; + struct mem_item *item, *next; + struct mem_zone *zone = strm->opaque; + + /* show high water mark */ + mem_high(strm, prefix); + + /* free leftover allocations and item structures, if any */ + item = zone->first; + while (item != NULL) { + free(item->ptr); + next = item->next; + free(item); + item = next; + count++; + } + + /* issue alerts about anything unexpected */ + if (count || zone->total) + fprintf(stderr, "** %s: %lu bytes in %d blocks not freed\n", + prefix, zone->total, count); + if (zone->notlifo) + fprintf(stderr, "** %s: %d frees not LIFO\n", prefix, zone->notlifo); + if (zone->rogue) + fprintf(stderr, "** %s: %d frees not recognized\n", + prefix, zone->rogue); + + /* free the zone and delete from the stream */ + free(zone); + strm->opaque = Z_NULL; + strm->zalloc = Z_NULL; + strm->zfree = Z_NULL; +} + +/* -- inflate test routines -- */ + +/* Decode a hexadecimal string, set *len to length, in[] to the bytes. This + decodes liberally, in that hex digits can be adjacent, in which case two in + a row writes a byte. Or they can delimited by any non-hex character, where + the delimiters are ignored except when a single hex digit is followed by a + delimiter in which case that single digit writes a byte. The returned + data is allocated and must eventually be freed. NULL is returned if out of + memory. If the length is not needed, then len can be NULL. */ +local unsigned char *h2b(const char *hex, unsigned *len) +{ + unsigned char *in; + unsigned next, val; + + in = malloc((strlen(hex) + 1) >> 1); + if (in == NULL) + return NULL; + next = 0; + val = 1; + do { + if (*hex >= '0' && *hex <= '9') + val = (val << 4) + *hex - '0'; + else if (*hex >= 'A' && *hex <= 'F') + val = (val << 4) + *hex - 'A' + 10; + else if (*hex >= 'a' && *hex <= 'f') + val = (val << 4) + *hex - 'a' + 10; + else if (val != 1 && val < 32) /* one digit followed by delimiter */ + val += 240; /* make it look like two digits */ + if (val > 255) { /* have two digits */ + in[next++] = val & 0xff; /* save the decoded byte */ + val = 1; /* start over */ + } + } while (*hex++); /* go through the loop with the terminating null */ + if (len != NULL) + *len = next; + in = reallocf(in, next); + return in; +} + +/* generic inflate() run, where hex is the hexadecimal input data, what is the + text to include in an error message, step is how much input data to feed + inflate() on each call, or zero to feed it all, win is the window bits + parameter to inflateInit2(), len is the size of the output buffer, and err + is the error code expected from the first inflate() call (the second + inflate() call is expected to return Z_STREAM_END). If win is 47, then + header information is collected with inflateGetHeader(). If a zlib stream + is looking for a dictionary, then an empty dictionary is provided. + inflate() is run until all of the input data is consumed. */ +local void inf(char *hex, char *what, unsigned step, int win, unsigned len, + int err) +{ + int ret; + unsigned have; + unsigned char *in, *out; + z_stream strm, copy; + gz_header head; + + mem_setup(&strm); + strm.avail_in = 0; + strm.next_in = Z_NULL; + ret = inflateInit2(&strm, win); + if (ret != Z_OK) { + mem_done(&strm, what); + return; + } + out = malloc(len); assert(out != NULL); + if (win == 47) { + head.extra = out; + head.extra_max = len; + head.name = out; + head.name_max = len; + head.comment = out; + head.comm_max = len; + ret = inflateGetHeader(&strm, &head); assert(ret == Z_OK); + } + in = h2b(hex, &have); assert(in != NULL); + if (step == 0 || step > have) + step = have; + strm.avail_in = step; + have -= step; + strm.next_in = in; + do { + strm.avail_out = len; + strm.next_out = out; + ret = inflate(&strm, Z_NO_FLUSH); assert(err == 9 || ret == err); + if (ret != Z_OK && ret != Z_BUF_ERROR && ret != Z_NEED_DICT) + break; + if (ret == Z_NEED_DICT) { + ret = inflateSetDictionary(&strm, in, 1); + assert(ret == Z_DATA_ERROR); + mem_limit(&strm, 1); + ret = inflateSetDictionary(&strm, out, 0); + assert(ret == Z_MEM_ERROR); + mem_limit(&strm, 0); + ((struct inflate_state *)strm.state)->mode = DICT; + ret = inflateSetDictionary(&strm, out, 0); + assert(ret == Z_OK); + ret = inflate(&strm, Z_NO_FLUSH); assert(ret == Z_BUF_ERROR); + } + ret = inflateCopy(©, &strm); assert(ret == Z_OK); + ret = inflateEnd(©); assert(ret == Z_OK); + err = 9; /* don't care next time around */ + have += strm.avail_in; + strm.avail_in = step > have ? have : step; + have -= strm.avail_in; + } while (strm.avail_in); + free(in); + free(out); + ret = inflateReset2(&strm, -8); assert(ret == Z_OK); + ret = inflateEnd(&strm); assert(ret == Z_OK); + mem_done(&strm, what); +} + +/* cover all of the lines in inflate.c up to inflate() */ +local void cover_support(void) +{ + int ret; + z_stream strm; + + mem_setup(&strm); + strm.avail_in = 0; + strm.next_in = Z_NULL; + ret = inflateInit(&strm); assert(ret == Z_OK); + mem_used(&strm, "inflate init"); + ret = inflatePrime(&strm, 5, 31); assert(ret == Z_OK); + ret = inflatePrime(&strm, -1, 0); assert(ret == Z_OK); + ret = inflateSetDictionary(&strm, Z_NULL, 0); + assert(ret == Z_STREAM_ERROR); + ret = inflateEnd(&strm); assert(ret == Z_OK); + mem_done(&strm, "prime"); + + inf("63 0", "force window allocation", 0, -15, 1, Z_OK); + inf("63 18 5", "force window replacement", 0, -8, 259, Z_OK); + inf("63 18 68 30 d0 0 0", "force split window update", 4, -8, 259, Z_OK); + inf("3 0", "use fixed blocks", 0, -15, 1, Z_STREAM_END); + inf("", "bad window size", 0, 1, 0, Z_STREAM_ERROR); + + mem_setup(&strm); + strm.avail_in = 0; + strm.next_in = Z_NULL; + ret = inflateInit_(&strm, ZLIB_VERSION - 1, (int)sizeof(z_stream)); + assert(ret == Z_VERSION_ERROR); + mem_done(&strm, "wrong version"); + + strm.avail_in = 0; + strm.next_in = Z_NULL; + ret = inflateInit(&strm); assert(ret == Z_OK); + ret = inflateEnd(&strm); assert(ret == Z_OK); + fputs("inflate built-in memory routines\n", stderr); +} + +/* cover all inflate() header and trailer cases and code after inflate() */ +local void cover_wrap(void) +{ + int ret; + z_stream strm, copy; + unsigned char dict[257]; + + ret = inflate(Z_NULL, 0); assert(ret == Z_STREAM_ERROR); + ret = inflateEnd(Z_NULL); assert(ret == Z_STREAM_ERROR); + ret = inflateCopy(Z_NULL, Z_NULL); assert(ret == Z_STREAM_ERROR); + fputs("inflate bad parameters\n", stderr); + + inf("1f 8b 0 0", "bad gzip method", 0, 31, 0, Z_DATA_ERROR); + inf("1f 8b 8 80", "bad gzip flags", 0, 31, 0, Z_DATA_ERROR); + inf("77 85", "bad zlib method", 0, 15, 0, Z_DATA_ERROR); + inf("8 99", "set window size from header", 0, 0, 0, Z_OK); + inf("78 9c", "bad zlib window size", 0, 8, 0, Z_DATA_ERROR); + inf("78 9c 63 0 0 0 1 0 1", "check adler32", 0, 15, 1, Z_STREAM_END); + inf("1f 8b 8 1e 0 0 0 0 0 0 1 0 0 0 0 0 0", "bad header crc", 0, 47, 1, + Z_DATA_ERROR); + inf("1f 8b 8 2 0 0 0 0 0 0 1d 26 3 0 0 0 0 0 0 0 0 0", "check gzip length", + 0, 47, 0, Z_STREAM_END); + inf("78 90", "bad zlib header check", 0, 47, 0, Z_DATA_ERROR); + inf("8 b8 0 0 0 1", "need dictionary", 0, 8, 0, Z_NEED_DICT); + inf("78 9c 63 0", "compute adler32", 0, 15, 1, Z_OK); + + mem_setup(&strm); + strm.avail_in = 0; + strm.next_in = Z_NULL; + ret = inflateInit2(&strm, -8); + strm.avail_in = 2; + strm.next_in = (void *)"\x63"; + strm.avail_out = 1; + strm.next_out = (void *)&ret; + mem_limit(&strm, 1); + ret = inflate(&strm, Z_NO_FLUSH); assert(ret == Z_MEM_ERROR); + ret = inflate(&strm, Z_NO_FLUSH); assert(ret == Z_MEM_ERROR); + mem_limit(&strm, 0); + memset(dict, 0, 257); + ret = inflateSetDictionary(&strm, dict, 257); + assert(ret == Z_OK); + mem_limit(&strm, (sizeof(struct inflate_state) << 1) + 256); + ret = inflatePrime(&strm, 16, 0); assert(ret == Z_OK); + strm.avail_in = 2; + strm.next_in = (void *)"\x80"; + ret = inflateSync(&strm); assert(ret == Z_DATA_ERROR); + ret = inflate(&strm, Z_NO_FLUSH); assert(ret == Z_STREAM_ERROR); + strm.avail_in = 4; + strm.next_in = (void *)"\0\0\xff\xff"; + ret = inflateSync(&strm); assert(ret == Z_OK); + (void)inflateSyncPoint(&strm); + ret = inflateCopy(©, &strm); assert(ret == Z_MEM_ERROR); + mem_limit(&strm, 0); + ret = inflateUndermine(&strm, 1); assert(ret == Z_DATA_ERROR); + (void)inflateMark(&strm); + ret = inflateEnd(&strm); assert(ret == Z_OK); + mem_done(&strm, "miscellaneous, force memory errors"); +} + +/* input and output functions for inflateBack() */ +local unsigned pull(void *desc, unsigned char **buf) +{ + static unsigned int next = 0; + static unsigned char dat[] = {0x63, 0, 2, 0}; + struct inflate_state *state; + + if (desc == Z_NULL) { + next = 0; + return 0; /* no input (already provided at next_in) */ + } + state = (void *)((z_stream *)desc)->state; + if (state != Z_NULL) + state->mode = SYNC; /* force an otherwise impossible situation */ + return next < sizeof(dat) ? (*buf = dat + next++, 1) : 0; +} + +local int push(void *desc, unsigned char *buf, unsigned len) +{ + buf += len; + return desc != Z_NULL; /* force error if desc not null */ +} + +/* cover inflateBack() up to common deflate data cases and after those */ +local void cover_back(void) +{ + int ret; + z_stream strm; + unsigned char win[32768]; + + ret = inflateBackInit_(Z_NULL, 0, win, 0, 0); + assert(ret == Z_VERSION_ERROR); + ret = inflateBackInit(Z_NULL, 0, win); assert(ret == Z_STREAM_ERROR); + ret = inflateBack(Z_NULL, Z_NULL, Z_NULL, Z_NULL, Z_NULL); + assert(ret == Z_STREAM_ERROR); + ret = inflateBackEnd(Z_NULL); assert(ret == Z_STREAM_ERROR); + fputs("inflateBack bad parameters\n", stderr); + + mem_setup(&strm); + ret = inflateBackInit(&strm, 15, win); assert(ret == Z_OK); + strm.avail_in = 2; + strm.next_in = (void *)"\x03"; + ret = inflateBack(&strm, pull, Z_NULL, push, Z_NULL); + assert(ret == Z_STREAM_END); + /* force output error */ + strm.avail_in = 3; + strm.next_in = (void *)"\x63\x00"; + ret = inflateBack(&strm, pull, Z_NULL, push, &strm); + assert(ret == Z_BUF_ERROR); + /* force mode error by mucking with state */ + ret = inflateBack(&strm, pull, &strm, push, Z_NULL); + assert(ret == Z_STREAM_ERROR); + ret = inflateBackEnd(&strm); assert(ret == Z_OK); + mem_done(&strm, "inflateBack bad state"); + + ret = inflateBackInit(&strm, 15, win); assert(ret == Z_OK); + ret = inflateBackEnd(&strm); assert(ret == Z_OK); + fputs("inflateBack built-in memory routines\n", stderr); +} + +/* do a raw inflate of data in hexadecimal with both inflate and inflateBack */ +local int try(char *hex, char *id, int err) +{ + int ret; + unsigned len, size; + unsigned char *in, *out, *win; + char *prefix; + z_stream strm; + + /* convert to hex */ + in = h2b(hex, &len); + assert(in != NULL); + + /* allocate work areas */ + size = len << 3; + out = malloc(size); + assert(out != NULL); + win = malloc(32768); + assert(win != NULL); + prefix = malloc(strlen(id) + 6); + assert(prefix != NULL); + + /* first with inflate */ + strcpy(prefix, id); + strcat(prefix, "-late"); + mem_setup(&strm); + strm.avail_in = 0; + strm.next_in = Z_NULL; + ret = inflateInit2(&strm, err < 0 ? 47 : -15); + assert(ret == Z_OK); + strm.avail_in = len; + strm.next_in = in; + do { + strm.avail_out = size; + strm.next_out = out; + ret = inflate(&strm, Z_TREES); + assert(ret != Z_STREAM_ERROR && ret != Z_MEM_ERROR); + if (ret == Z_DATA_ERROR || ret == Z_NEED_DICT) + break; + } while (strm.avail_in || strm.avail_out == 0); + if (err) { + assert(ret == Z_DATA_ERROR); + assert(strcmp(id, strm.msg) == 0); + } + inflateEnd(&strm); + mem_done(&strm, prefix); + + /* then with inflateBack */ + if (err >= 0) { + strcpy(prefix, id); + strcat(prefix, "-back"); + mem_setup(&strm); + ret = inflateBackInit(&strm, 15, win); + assert(ret == Z_OK); + strm.avail_in = len; + strm.next_in = in; + ret = inflateBack(&strm, pull, Z_NULL, push, Z_NULL); + assert(ret != Z_STREAM_ERROR); + if (err) { + assert(ret == Z_DATA_ERROR); + assert(strcmp(id, strm.msg) == 0); + } + inflateBackEnd(&strm); + mem_done(&strm, prefix); + } + + /* clean up */ + free(prefix); + free(win); + free(out); + free(in); + return ret; +} + +/* cover deflate data cases in both inflate() and inflateBack() */ +local void cover_inflate(void) +{ + try("0 0 0 0 0", "invalid stored block lengths", 1); + try("3 0", "fixed", 0); + try("6", "invalid block type", 1); + try("1 1 0 fe ff 0", "stored", 0); + try("fc 0 0", "too many length or distance symbols", 1); + try("4 0 fe ff", "invalid code lengths set", 1); + try("4 0 24 49 0", "invalid bit length repeat", 1); + try("4 0 24 e9 ff ff", "invalid bit length repeat", 1); + try("4 0 24 e9 ff 6d", "invalid code -- missing end-of-block", 1); + try("4 80 49 92 24 49 92 24 71 ff ff 93 11 0", + "invalid literal/lengths set", 1); + try("4 80 49 92 24 49 92 24 f b4 ff ff c3 84", "invalid distances set", 1); + try("4 c0 81 8 0 0 0 0 20 7f eb b 0 0", "invalid literal/length code", 1); + try("2 7e ff ff", "invalid distance code", 1); + try("c c0 81 0 0 0 0 0 90 ff 6b 4 0", "invalid distance too far back", 1); + + /* also trailer mismatch just in inflate() */ + try("1f 8b 8 0 0 0 0 0 0 0 3 0 0 0 0 1", "incorrect data check", -1); + try("1f 8b 8 0 0 0 0 0 0 0 3 0 0 0 0 0 0 0 0 1", + "incorrect length check", -1); + try("5 c0 21 d 0 0 0 80 b0 fe 6d 2f 91 6c", "pull 17", 0); + try("5 e0 81 91 24 cb b2 2c 49 e2 f 2e 8b 9a 47 56 9f fb fe ec d2 ff 1f", + "long code", 0); + try("ed c0 1 1 0 0 0 40 20 ff 57 1b 42 2c 4f", "length extra", 0); + try("ed cf c1 b1 2c 47 10 c4 30 fa 6f 35 1d 1 82 59 3d fb be 2e 2a fc f c", + "long distance and extra", 0); + try("ed c0 81 0 0 0 0 80 a0 fd a9 17 a9 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 " + "0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 6", "window end", 0); + inf("2 8 20 80 0 3 0", "inflate_fast TYPE return", 0, -15, 258, + Z_STREAM_END); + inf("63 18 5 40 c 0", "window wrap", 3, -8, 300, Z_OK); +} + +/* cover remaining lines in inftrees.c */ +local void cover_trees(void) +{ + int ret; + unsigned bits; + unsigned short lens[16], work[16]; + code *next, table[ENOUGH_DISTS]; + + /* we need to call inflate_table() directly in order to manifest not- + enough errors, since zlib insures that enough is always enough */ + for (bits = 0; bits < 15; bits++) + lens[bits] = (unsigned short)(bits + 1); + lens[15] = 15; + next = table; + bits = 15; + ret = inflate_table(DISTS, lens, 16, &next, &bits, work); + assert(ret == 1); + next = table; + bits = 1; + ret = inflate_table(DISTS, lens, 16, &next, &bits, work); + assert(ret == 1); + fputs("inflate_table not enough errors\n", stderr); +} + +/* cover remaining inffast.c decoding and window copying */ +local void cover_fast(void) +{ + inf("e5 e0 81 ad 6d cb b2 2c c9 01 1e 59 63 ae 7d ee fb 4d fd b5 35 41 68" + " ff 7f 0f 0 0 0", "fast length extra bits", 0, -8, 258, Z_DATA_ERROR); + inf("25 fd 81 b5 6d 59 b6 6a 49 ea af 35 6 34 eb 8c b9 f6 b9 1e ef 67 49" + " 50 fe ff ff 3f 0 0", "fast distance extra bits", 0, -8, 258, + Z_DATA_ERROR); + inf("3 7e 0 0 0 0 0", "fast invalid distance code", 0, -8, 258, + Z_DATA_ERROR); + inf("1b 7 0 0 0 0 0", "fast invalid literal/length code", 0, -8, 258, + Z_DATA_ERROR); + inf("d c7 1 ae eb 38 c 4 41 a0 87 72 de df fb 1f b8 36 b1 38 5d ff ff 0", + "fast 2nd level codes and too far back", 0, -8, 258, Z_DATA_ERROR); + inf("63 18 5 8c 10 8 0 0 0 0", "very common case", 0, -8, 259, Z_OK); + inf("63 60 60 18 c9 0 8 18 18 18 26 c0 28 0 29 0 0 0", + "contiguous and wrap around window", 6, -8, 259, Z_OK); + inf("63 0 3 0 0 0 0 0", "copy direct from output", 0, -8, 259, + Z_STREAM_END); +} + +int main(void) +{ + fprintf(stderr, "%s\n", zlibVersion()); + cover_support(); + cover_wrap(); + cover_back(); + cover_inflate(); + cover_trees(); + cover_fast(); + return 0; +} diff --git a/software/scsi2sd-util/zlib-1.2.8/test/minigzip.c b/software/scsi2sd-util/zlib-1.2.8/test/minigzip.c new file mode 100644 index 0000000..b3025a4 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/test/minigzip.c @@ -0,0 +1,651 @@ +/* minigzip.c -- simulate gzip using the zlib compression library + * Copyright (C) 1995-2006, 2010, 2011 Jean-loup Gailly. + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* + * minigzip is a minimal implementation of the gzip utility. This is + * only an example of using zlib and isn't meant to replace the + * full-featured gzip. No attempt is made to deal with file systems + * limiting names to 14 or 8+3 characters, etc... Error checking is + * very limited. So use minigzip only for testing; use gzip for the + * real thing. On MSDOS, use only on file names without extension + * or in pipe mode. + */ + +/* @(#) $Id$ */ + +#include "zlib.h" +#include + +#ifdef STDC +# include +# include +#endif + +#ifdef USE_MMAP +# include +# include +# include +#endif + +#if defined(MSDOS) || defined(OS2) || defined(WIN32) || defined(__CYGWIN__) +# include +# include +# ifdef UNDER_CE +# include +# endif +# define SET_BINARY_MODE(file) setmode(fileno(file), O_BINARY) +#else +# define SET_BINARY_MODE(file) +#endif + +#ifdef _MSC_VER +# define snprintf _snprintf +#endif + +#ifdef VMS +# define unlink delete +# define GZ_SUFFIX "-gz" +#endif +#ifdef RISCOS +# define unlink remove +# define GZ_SUFFIX "-gz" +# define fileno(file) file->__file +#endif +#if defined(__MWERKS__) && __dest_os != __be_os && __dest_os != __win32_os +# include /* for fileno */ +#endif + +#if !defined(Z_HAVE_UNISTD_H) && !defined(_LARGEFILE64_SOURCE) +#ifndef WIN32 /* unlink already in stdio.h for WIN32 */ + extern int unlink OF((const char *)); +#endif +#endif + +#if defined(UNDER_CE) +# include +# define perror(s) pwinerror(s) + +/* Map the Windows error number in ERROR to a locale-dependent error + message string and return a pointer to it. Typically, the values + for ERROR come from GetLastError. + + The string pointed to shall not be modified by the application, + but may be overwritten by a subsequent call to strwinerror + + The strwinerror function does not change the current setting + of GetLastError. */ + +static char *strwinerror (error) + DWORD error; +{ + static char buf[1024]; + + wchar_t *msgbuf; + DWORD lasterr = GetLastError(); + DWORD chars = FormatMessage(FORMAT_MESSAGE_FROM_SYSTEM + | FORMAT_MESSAGE_ALLOCATE_BUFFER, + NULL, + error, + 0, /* Default language */ + (LPVOID)&msgbuf, + 0, + NULL); + if (chars != 0) { + /* If there is an \r\n appended, zap it. */ + if (chars >= 2 + && msgbuf[chars - 2] == '\r' && msgbuf[chars - 1] == '\n') { + chars -= 2; + msgbuf[chars] = 0; + } + + if (chars > sizeof (buf) - 1) { + chars = sizeof (buf) - 1; + msgbuf[chars] = 0; + } + + wcstombs(buf, msgbuf, chars + 1); + LocalFree(msgbuf); + } + else { + sprintf(buf, "unknown win32 error (%ld)", error); + } + + SetLastError(lasterr); + return buf; +} + +static void pwinerror (s) + const char *s; +{ + if (s && *s) + fprintf(stderr, "%s: %s\n", s, strwinerror(GetLastError ())); + else + fprintf(stderr, "%s\n", strwinerror(GetLastError ())); +} + +#endif /* UNDER_CE */ + +#ifndef GZ_SUFFIX +# define GZ_SUFFIX ".gz" +#endif +#define SUFFIX_LEN (sizeof(GZ_SUFFIX)-1) + +#define BUFLEN 16384 +#define MAX_NAME_LEN 1024 + +#ifdef MAXSEG_64K +# define local static + /* Needed for systems with limitation on stack size. */ +#else +# define local +#endif + +#ifdef Z_SOLO +/* for Z_SOLO, create simplified gz* functions using deflate and inflate */ + +#if defined(Z_HAVE_UNISTD_H) || defined(Z_LARGE) +# include /* for unlink() */ +#endif + +void *myalloc OF((void *, unsigned, unsigned)); +void myfree OF((void *, void *)); + +void *myalloc(q, n, m) + void *q; + unsigned n, m; +{ + q = Z_NULL; + return calloc(n, m); +} + +void myfree(q, p) + void *q, *p; +{ + q = Z_NULL; + free(p); +} + +typedef struct gzFile_s { + FILE *file; + int write; + int err; + char *msg; + z_stream strm; +} *gzFile; + +gzFile gzopen OF((const char *, const char *)); +gzFile gzdopen OF((int, const char *)); +gzFile gz_open OF((const char *, int, const char *)); + +gzFile gzopen(path, mode) +const char *path; +const char *mode; +{ + return gz_open(path, -1, mode); +} + +gzFile gzdopen(fd, mode) +int fd; +const char *mode; +{ + return gz_open(NULL, fd, mode); +} + +gzFile gz_open(path, fd, mode) + const char *path; + int fd; + const char *mode; +{ + gzFile gz; + int ret; + + gz = malloc(sizeof(struct gzFile_s)); + if (gz == NULL) + return NULL; + gz->write = strchr(mode, 'w') != NULL; + gz->strm.zalloc = myalloc; + gz->strm.zfree = myfree; + gz->strm.opaque = Z_NULL; + if (gz->write) + ret = deflateInit2(&(gz->strm), -1, 8, 15 + 16, 8, 0); + else { + gz->strm.next_in = 0; + gz->strm.avail_in = Z_NULL; + ret = inflateInit2(&(gz->strm), 15 + 16); + } + if (ret != Z_OK) { + free(gz); + return NULL; + } + gz->file = path == NULL ? fdopen(fd, gz->write ? "wb" : "rb") : + fopen(path, gz->write ? "wb" : "rb"); + if (gz->file == NULL) { + gz->write ? deflateEnd(&(gz->strm)) : inflateEnd(&(gz->strm)); + free(gz); + return NULL; + } + gz->err = 0; + gz->msg = ""; + return gz; +} + +int gzwrite OF((gzFile, const void *, unsigned)); + +int gzwrite(gz, buf, len) + gzFile gz; + const void *buf; + unsigned len; +{ + z_stream *strm; + unsigned char out[BUFLEN]; + + if (gz == NULL || !gz->write) + return 0; + strm = &(gz->strm); + strm->next_in = (void *)buf; + strm->avail_in = len; + do { + strm->next_out = out; + strm->avail_out = BUFLEN; + (void)deflate(strm, Z_NO_FLUSH); + fwrite(out, 1, BUFLEN - strm->avail_out, gz->file); + } while (strm->avail_out == 0); + return len; +} + +int gzread OF((gzFile, void *, unsigned)); + +int gzread(gz, buf, len) + gzFile gz; + void *buf; + unsigned len; +{ + int ret; + unsigned got; + unsigned char in[1]; + z_stream *strm; + + if (gz == NULL || gz->write) + return 0; + if (gz->err) + return 0; + strm = &(gz->strm); + strm->next_out = (void *)buf; + strm->avail_out = len; + do { + got = fread(in, 1, 1, gz->file); + if (got == 0) + break; + strm->next_in = in; + strm->avail_in = 1; + ret = inflate(strm, Z_NO_FLUSH); + if (ret == Z_DATA_ERROR) { + gz->err = Z_DATA_ERROR; + gz->msg = strm->msg; + return 0; + } + if (ret == Z_STREAM_END) + inflateReset(strm); + } while (strm->avail_out); + return len - strm->avail_out; +} + +int gzclose OF((gzFile)); + +int gzclose(gz) + gzFile gz; +{ + z_stream *strm; + unsigned char out[BUFLEN]; + + if (gz == NULL) + return Z_STREAM_ERROR; + strm = &(gz->strm); + if (gz->write) { + strm->next_in = Z_NULL; + strm->avail_in = 0; + do { + strm->next_out = out; + strm->avail_out = BUFLEN; + (void)deflate(strm, Z_FINISH); + fwrite(out, 1, BUFLEN - strm->avail_out, gz->file); + } while (strm->avail_out == 0); + deflateEnd(strm); + } + else + inflateEnd(strm); + fclose(gz->file); + free(gz); + return Z_OK; +} + +const char *gzerror OF((gzFile, int *)); + +const char *gzerror(gz, err) + gzFile gz; + int *err; +{ + *err = gz->err; + return gz->msg; +} + +#endif + +char *prog; + +void error OF((const char *msg)); +void gz_compress OF((FILE *in, gzFile out)); +#ifdef USE_MMAP +int gz_compress_mmap OF((FILE *in, gzFile out)); +#endif +void gz_uncompress OF((gzFile in, FILE *out)); +void file_compress OF((char *file, char *mode)); +void file_uncompress OF((char *file)); +int main OF((int argc, char *argv[])); + +/* =========================================================================== + * Display error message and exit + */ +void error(msg) + const char *msg; +{ + fprintf(stderr, "%s: %s\n", prog, msg); + exit(1); +} + +/* =========================================================================== + * Compress input to output then close both files. + */ + +void gz_compress(in, out) + FILE *in; + gzFile out; +{ + local char buf[BUFLEN]; + int len; + int err; + +#ifdef USE_MMAP + /* Try first compressing with mmap. If mmap fails (minigzip used in a + * pipe), use the normal fread loop. + */ + if (gz_compress_mmap(in, out) == Z_OK) return; +#endif + for (;;) { + len = (int)fread(buf, 1, sizeof(buf), in); + if (ferror(in)) { + perror("fread"); + exit(1); + } + if (len == 0) break; + + if (gzwrite(out, buf, (unsigned)len) != len) error(gzerror(out, &err)); + } + fclose(in); + if (gzclose(out) != Z_OK) error("failed gzclose"); +} + +#ifdef USE_MMAP /* MMAP version, Miguel Albrecht */ + +/* Try compressing the input file at once using mmap. Return Z_OK if + * if success, Z_ERRNO otherwise. + */ +int gz_compress_mmap(in, out) + FILE *in; + gzFile out; +{ + int len; + int err; + int ifd = fileno(in); + caddr_t buf; /* mmap'ed buffer for the entire input file */ + off_t buf_len; /* length of the input file */ + struct stat sb; + + /* Determine the size of the file, needed for mmap: */ + if (fstat(ifd, &sb) < 0) return Z_ERRNO; + buf_len = sb.st_size; + if (buf_len <= 0) return Z_ERRNO; + + /* Now do the actual mmap: */ + buf = mmap((caddr_t) 0, buf_len, PROT_READ, MAP_SHARED, ifd, (off_t)0); + if (buf == (caddr_t)(-1)) return Z_ERRNO; + + /* Compress the whole file at once: */ + len = gzwrite(out, (char *)buf, (unsigned)buf_len); + + if (len != (int)buf_len) error(gzerror(out, &err)); + + munmap(buf, buf_len); + fclose(in); + if (gzclose(out) != Z_OK) error("failed gzclose"); + return Z_OK; +} +#endif /* USE_MMAP */ + +/* =========================================================================== + * Uncompress input to output then close both files. + */ +void gz_uncompress(in, out) + gzFile in; + FILE *out; +{ + local char buf[BUFLEN]; + int len; + int err; + + for (;;) { + len = gzread(in, buf, sizeof(buf)); + if (len < 0) error (gzerror(in, &err)); + if (len == 0) break; + + if ((int)fwrite(buf, 1, (unsigned)len, out) != len) { + error("failed fwrite"); + } + } + if (fclose(out)) error("failed fclose"); + + if (gzclose(in) != Z_OK) error("failed gzclose"); +} + + +/* =========================================================================== + * Compress the given file: create a corresponding .gz file and remove the + * original. + */ +void file_compress(file, mode) + char *file; + char *mode; +{ + local char outfile[MAX_NAME_LEN]; + FILE *in; + gzFile out; + + if (strlen(file) + strlen(GZ_SUFFIX) >= sizeof(outfile)) { + fprintf(stderr, "%s: filename too long\n", prog); + exit(1); + } + +#if !defined(NO_snprintf) && !defined(NO_vsnprintf) + snprintf(outfile, sizeof(outfile), "%s%s", file, GZ_SUFFIX); +#else + strcpy(outfile, file); + strcat(outfile, GZ_SUFFIX); +#endif + + in = fopen(file, "rb"); + if (in == NULL) { + perror(file); + exit(1); + } + out = gzopen(outfile, mode); + if (out == NULL) { + fprintf(stderr, "%s: can't gzopen %s\n", prog, outfile); + exit(1); + } + gz_compress(in, out); + + unlink(file); +} + + +/* =========================================================================== + * Uncompress the given file and remove the original. + */ +void file_uncompress(file) + char *file; +{ + local char buf[MAX_NAME_LEN]; + char *infile, *outfile; + FILE *out; + gzFile in; + size_t len = strlen(file); + + if (len + strlen(GZ_SUFFIX) >= sizeof(buf)) { + fprintf(stderr, "%s: filename too long\n", prog); + exit(1); + } + +#if !defined(NO_snprintf) && !defined(NO_vsnprintf) + snprintf(buf, sizeof(buf), "%s", file); +#else + strcpy(buf, file); +#endif + + if (len > SUFFIX_LEN && strcmp(file+len-SUFFIX_LEN, GZ_SUFFIX) == 0) { + infile = file; + outfile = buf; + outfile[len-3] = '\0'; + } else { + outfile = file; + infile = buf; +#if !defined(NO_snprintf) && !defined(NO_vsnprintf) + snprintf(buf + len, sizeof(buf) - len, "%s", GZ_SUFFIX); +#else + strcat(infile, GZ_SUFFIX); +#endif + } + in = gzopen(infile, "rb"); + if (in == NULL) { + fprintf(stderr, "%s: can't gzopen %s\n", prog, infile); + exit(1); + } + out = fopen(outfile, "wb"); + if (out == NULL) { + perror(file); + exit(1); + } + + gz_uncompress(in, out); + + unlink(infile); +} + + +/* =========================================================================== + * Usage: minigzip [-c] [-d] [-f] [-h] [-r] [-1 to -9] [files...] + * -c : write to standard output + * -d : decompress + * -f : compress with Z_FILTERED + * -h : compress with Z_HUFFMAN_ONLY + * -r : compress with Z_RLE + * -1 to -9 : compression level + */ + +int main(argc, argv) + int argc; + char *argv[]; +{ + int copyout = 0; + int uncompr = 0; + gzFile file; + char *bname, outmode[20]; + +#if !defined(NO_snprintf) && !defined(NO_vsnprintf) + snprintf(outmode, sizeof(outmode), "%s", "wb6 "); +#else + strcpy(outmode, "wb6 "); +#endif + + prog = argv[0]; + bname = strrchr(argv[0], '/'); + if (bname) + bname++; + else + bname = argv[0]; + argc--, argv++; + + if (!strcmp(bname, "gunzip")) + uncompr = 1; + else if (!strcmp(bname, "zcat")) + copyout = uncompr = 1; + + while (argc > 0) { + if (strcmp(*argv, "-c") == 0) + copyout = 1; + else if (strcmp(*argv, "-d") == 0) + uncompr = 1; + else if (strcmp(*argv, "-f") == 0) + outmode[3] = 'f'; + else if (strcmp(*argv, "-h") == 0) + outmode[3] = 'h'; + else if (strcmp(*argv, "-r") == 0) + outmode[3] = 'R'; + else if ((*argv)[0] == '-' && (*argv)[1] >= '1' && (*argv)[1] <= '9' && + (*argv)[2] == 0) + outmode[2] = (*argv)[1]; + else + break; + argc--, argv++; + } + if (outmode[3] == ' ') + outmode[3] = 0; + if (argc == 0) { + SET_BINARY_MODE(stdin); + SET_BINARY_MODE(stdout); + if (uncompr) { + file = gzdopen(fileno(stdin), "rb"); + if (file == NULL) error("can't gzdopen stdin"); + gz_uncompress(file, stdout); + } else { + file = gzdopen(fileno(stdout), outmode); + if (file == NULL) error("can't gzdopen stdout"); + gz_compress(stdin, file); + } + } else { + if (copyout) { + SET_BINARY_MODE(stdout); + } + do { + if (uncompr) { + if (copyout) { + file = gzopen(*argv, "rb"); + if (file == NULL) + fprintf(stderr, "%s: can't gzopen %s\n", prog, *argv); + else + gz_uncompress(file, stdout); + } else { + file_uncompress(*argv); + } + } else { + if (copyout) { + FILE * in = fopen(*argv, "rb"); + + if (in == NULL) { + perror(*argv); + } else { + file = gzdopen(fileno(stdout), outmode); + if (file == NULL) error("can't gzdopen stdout"); + + gz_compress(in, file); + } + + } else { + file_compress(*argv, outmode); + } + } + } while (argv++, --argc); + } + return 0; +} diff --git a/software/scsi2sd-util/zlib-1.2.8/treebuild.xml b/software/scsi2sd-util/zlib-1.2.8/treebuild.xml new file mode 100644 index 0000000..38d29d7 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/treebuild.xml @@ -0,0 +1,116 @@ + + + + zip compression library + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/software/scsi2sd-util/zlib-1.2.8/trees.c b/software/scsi2sd-util/zlib-1.2.8/trees.c new file mode 100644 index 0000000..1fd7759 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/trees.c @@ -0,0 +1,1226 @@ +/* trees.c -- output deflated data using Huffman coding + * Copyright (C) 1995-2012 Jean-loup Gailly + * detect_data_type() function provided freely by Cosmin Truta, 2006 + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* + * ALGORITHM + * + * The "deflation" process uses several Huffman trees. The more + * common source values are represented by shorter bit sequences. + * + * Each code tree is stored in a compressed form which is itself + * a Huffman encoding of the lengths of all the code strings (in + * ascending order by source values). The actual code strings are + * reconstructed from the lengths in the inflate process, as described + * in the deflate specification. + * + * REFERENCES + * + * Deutsch, L.P.,"'Deflate' Compressed Data Format Specification". + * Available in ftp.uu.net:/pub/archiving/zip/doc/deflate-1.1.doc + * + * Storer, James A. + * Data Compression: Methods and Theory, pp. 49-50. + * Computer Science Press, 1988. ISBN 0-7167-8156-5. + * + * Sedgewick, R. + * Algorithms, p290. + * Addison-Wesley, 1983. ISBN 0-201-06672-6. + */ + +/* @(#) $Id$ */ + +/* #define GEN_TREES_H */ + +#include "deflate.h" + +#ifdef DEBUG +# include +#endif + +/* =========================================================================== + * Constants + */ + +#define MAX_BL_BITS 7 +/* Bit length codes must not exceed MAX_BL_BITS bits */ + +#define END_BLOCK 256 +/* end of block literal code */ + +#define REP_3_6 16 +/* repeat previous bit length 3-6 times (2 bits of repeat count) */ + +#define REPZ_3_10 17 +/* repeat a zero length 3-10 times (3 bits of repeat count) */ + +#define REPZ_11_138 18 +/* repeat a zero length 11-138 times (7 bits of repeat count) */ + +local const int extra_lbits[LENGTH_CODES] /* extra bits for each length code */ + = {0,0,0,0,0,0,0,0,1,1,1,1,2,2,2,2,3,3,3,3,4,4,4,4,5,5,5,5,0}; + +local const int extra_dbits[D_CODES] /* extra bits for each distance code */ + = {0,0,0,0,1,1,2,2,3,3,4,4,5,5,6,6,7,7,8,8,9,9,10,10,11,11,12,12,13,13}; + +local const int extra_blbits[BL_CODES]/* extra bits for each bit length code */ + = {0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2,3,7}; + +local const uch bl_order[BL_CODES] + = {16,17,18,0,8,7,9,6,10,5,11,4,12,3,13,2,14,1,15}; +/* The lengths of the bit length codes are sent in order of decreasing + * probability, to avoid transmitting the lengths for unused bit length codes. + */ + +/* =========================================================================== + * Local data. These are initialized only once. + */ + +#define DIST_CODE_LEN 512 /* see definition of array dist_code below */ + +#if defined(GEN_TREES_H) || !defined(STDC) +/* non ANSI compilers may not accept trees.h */ + +local ct_data static_ltree[L_CODES+2]; +/* The static literal tree. Since the bit lengths are imposed, there is no + * need for the L_CODES extra codes used during heap construction. However + * The codes 286 and 287 are needed to build a canonical tree (see _tr_init + * below). + */ + +local ct_data static_dtree[D_CODES]; +/* The static distance tree. (Actually a trivial tree since all codes use + * 5 bits.) + */ + +uch _dist_code[DIST_CODE_LEN]; +/* Distance codes. The first 256 values correspond to the distances + * 3 .. 258, the last 256 values correspond to the top 8 bits of + * the 15 bit distances. + */ + +uch _length_code[MAX_MATCH-MIN_MATCH+1]; +/* length code for each normalized match length (0 == MIN_MATCH) */ + +local int base_length[LENGTH_CODES]; +/* First normalized length for each code (0 = MIN_MATCH) */ + +local int base_dist[D_CODES]; +/* First normalized distance for each code (0 = distance of 1) */ + +#else +# include "trees.h" +#endif /* GEN_TREES_H */ + +struct static_tree_desc_s { + const ct_data *static_tree; /* static tree or NULL */ + const intf *extra_bits; /* extra bits for each code or NULL */ + int extra_base; /* base index for extra_bits */ + int elems; /* max number of elements in the tree */ + int max_length; /* max bit length for the codes */ +}; + +local static_tree_desc static_l_desc = +{static_ltree, extra_lbits, LITERALS+1, L_CODES, MAX_BITS}; + +local static_tree_desc static_d_desc = +{static_dtree, extra_dbits, 0, D_CODES, MAX_BITS}; + +local static_tree_desc static_bl_desc = +{(const ct_data *)0, extra_blbits, 0, BL_CODES, MAX_BL_BITS}; + +/* =========================================================================== + * Local (static) routines in this file. + */ + +local void tr_static_init OF((void)); +local void init_block OF((deflate_state *s)); +local void pqdownheap OF((deflate_state *s, ct_data *tree, int k)); +local void gen_bitlen OF((deflate_state *s, tree_desc *desc)); +local void gen_codes OF((ct_data *tree, int max_code, ushf *bl_count)); +local void build_tree OF((deflate_state *s, tree_desc *desc)); +local void scan_tree OF((deflate_state *s, ct_data *tree, int max_code)); +local void send_tree OF((deflate_state *s, ct_data *tree, int max_code)); +local int build_bl_tree OF((deflate_state *s)); +local void send_all_trees OF((deflate_state *s, int lcodes, int dcodes, + int blcodes)); +local void compress_block OF((deflate_state *s, const ct_data *ltree, + const ct_data *dtree)); +local int detect_data_type OF((deflate_state *s)); +local unsigned bi_reverse OF((unsigned value, int length)); +local void bi_windup OF((deflate_state *s)); +local void bi_flush OF((deflate_state *s)); +local void copy_block OF((deflate_state *s, charf *buf, unsigned len, + int header)); + +#ifdef GEN_TREES_H +local void gen_trees_header OF((void)); +#endif + +#ifndef DEBUG +# define send_code(s, c, tree) send_bits(s, tree[c].Code, tree[c].Len) + /* Send a code of the given tree. c and tree must not have side effects */ + +#else /* DEBUG */ +# define send_code(s, c, tree) \ + { if (z_verbose>2) fprintf(stderr,"\ncd %3d ",(c)); \ + send_bits(s, tree[c].Code, tree[c].Len); } +#endif + +/* =========================================================================== + * Output a short LSB first on the stream. + * IN assertion: there is enough room in pendingBuf. + */ +#define put_short(s, w) { \ + put_byte(s, (uch)((w) & 0xff)); \ + put_byte(s, (uch)((ush)(w) >> 8)); \ +} + +/* =========================================================================== + * Send a value on a given number of bits. + * IN assertion: length <= 16 and value fits in length bits. + */ +#ifdef DEBUG +local void send_bits OF((deflate_state *s, int value, int length)); + +local void send_bits(s, value, length) + deflate_state *s; + int value; /* value to send */ + int length; /* number of bits */ +{ + Tracevv((stderr," l %2d v %4x ", length, value)); + Assert(length > 0 && length <= 15, "invalid length"); + s->bits_sent += (ulg)length; + + /* If not enough room in bi_buf, use (valid) bits from bi_buf and + * (16 - bi_valid) bits from value, leaving (width - (16-bi_valid)) + * unused bits in value. + */ + if (s->bi_valid > (int)Buf_size - length) { + s->bi_buf |= (ush)value << s->bi_valid; + put_short(s, s->bi_buf); + s->bi_buf = (ush)value >> (Buf_size - s->bi_valid); + s->bi_valid += length - Buf_size; + } else { + s->bi_buf |= (ush)value << s->bi_valid; + s->bi_valid += length; + } +} +#else /* !DEBUG */ + +#define send_bits(s, value, length) \ +{ int len = length;\ + if (s->bi_valid > (int)Buf_size - len) {\ + int val = value;\ + s->bi_buf |= (ush)val << s->bi_valid;\ + put_short(s, s->bi_buf);\ + s->bi_buf = (ush)val >> (Buf_size - s->bi_valid);\ + s->bi_valid += len - Buf_size;\ + } else {\ + s->bi_buf |= (ush)(value) << s->bi_valid;\ + s->bi_valid += len;\ + }\ +} +#endif /* DEBUG */ + + +/* the arguments must not have side effects */ + +/* =========================================================================== + * Initialize the various 'constant' tables. + */ +local void tr_static_init() +{ +#if defined(GEN_TREES_H) || !defined(STDC) + static int static_init_done = 0; + int n; /* iterates over tree elements */ + int bits; /* bit counter */ + int length; /* length value */ + int code; /* code value */ + int dist; /* distance index */ + ush bl_count[MAX_BITS+1]; + /* number of codes at each bit length for an optimal tree */ + + if (static_init_done) return; + + /* For some embedded targets, global variables are not initialized: */ +#ifdef NO_INIT_GLOBAL_POINTERS + static_l_desc.static_tree = static_ltree; + static_l_desc.extra_bits = extra_lbits; + static_d_desc.static_tree = static_dtree; + static_d_desc.extra_bits = extra_dbits; + static_bl_desc.extra_bits = extra_blbits; +#endif + + /* Initialize the mapping length (0..255) -> length code (0..28) */ + length = 0; + for (code = 0; code < LENGTH_CODES-1; code++) { + base_length[code] = length; + for (n = 0; n < (1< dist code (0..29) */ + dist = 0; + for (code = 0 ; code < 16; code++) { + base_dist[code] = dist; + for (n = 0; n < (1<>= 7; /* from now on, all distances are divided by 128 */ + for ( ; code < D_CODES; code++) { + base_dist[code] = dist << 7; + for (n = 0; n < (1<<(extra_dbits[code]-7)); n++) { + _dist_code[256 + dist++] = (uch)code; + } + } + Assert (dist == 256, "tr_static_init: 256+dist != 512"); + + /* Construct the codes of the static literal tree */ + for (bits = 0; bits <= MAX_BITS; bits++) bl_count[bits] = 0; + n = 0; + while (n <= 143) static_ltree[n++].Len = 8, bl_count[8]++; + while (n <= 255) static_ltree[n++].Len = 9, bl_count[9]++; + while (n <= 279) static_ltree[n++].Len = 7, bl_count[7]++; + while (n <= 287) static_ltree[n++].Len = 8, bl_count[8]++; + /* Codes 286 and 287 do not exist, but we must include them in the + * tree construction to get a canonical Huffman tree (longest code + * all ones) + */ + gen_codes((ct_data *)static_ltree, L_CODES+1, bl_count); + + /* The static distance tree is trivial: */ + for (n = 0; n < D_CODES; n++) { + static_dtree[n].Len = 5; + static_dtree[n].Code = bi_reverse((unsigned)n, 5); + } + static_init_done = 1; + +# ifdef GEN_TREES_H + gen_trees_header(); +# endif +#endif /* defined(GEN_TREES_H) || !defined(STDC) */ +} + +/* =========================================================================== + * Genererate the file trees.h describing the static trees. + */ +#ifdef GEN_TREES_H +# ifndef DEBUG +# include +# endif + +# define SEPARATOR(i, last, width) \ + ((i) == (last)? "\n};\n\n" : \ + ((i) % (width) == (width)-1 ? ",\n" : ", ")) + +void gen_trees_header() +{ + FILE *header = fopen("trees.h", "w"); + int i; + + Assert (header != NULL, "Can't open trees.h"); + fprintf(header, + "/* header created automatically with -DGEN_TREES_H */\n\n"); + + fprintf(header, "local const ct_data static_ltree[L_CODES+2] = {\n"); + for (i = 0; i < L_CODES+2; i++) { + fprintf(header, "{{%3u},{%3u}}%s", static_ltree[i].Code, + static_ltree[i].Len, SEPARATOR(i, L_CODES+1, 5)); + } + + fprintf(header, "local const ct_data static_dtree[D_CODES] = {\n"); + for (i = 0; i < D_CODES; i++) { + fprintf(header, "{{%2u},{%2u}}%s", static_dtree[i].Code, + static_dtree[i].Len, SEPARATOR(i, D_CODES-1, 5)); + } + + fprintf(header, "const uch ZLIB_INTERNAL _dist_code[DIST_CODE_LEN] = {\n"); + for (i = 0; i < DIST_CODE_LEN; i++) { + fprintf(header, "%2u%s", _dist_code[i], + SEPARATOR(i, DIST_CODE_LEN-1, 20)); + } + + fprintf(header, + "const uch ZLIB_INTERNAL _length_code[MAX_MATCH-MIN_MATCH+1]= {\n"); + for (i = 0; i < MAX_MATCH-MIN_MATCH+1; i++) { + fprintf(header, "%2u%s", _length_code[i], + SEPARATOR(i, MAX_MATCH-MIN_MATCH, 20)); + } + + fprintf(header, "local const int base_length[LENGTH_CODES] = {\n"); + for (i = 0; i < LENGTH_CODES; i++) { + fprintf(header, "%1u%s", base_length[i], + SEPARATOR(i, LENGTH_CODES-1, 20)); + } + + fprintf(header, "local const int base_dist[D_CODES] = {\n"); + for (i = 0; i < D_CODES; i++) { + fprintf(header, "%5u%s", base_dist[i], + SEPARATOR(i, D_CODES-1, 10)); + } + + fclose(header); +} +#endif /* GEN_TREES_H */ + +/* =========================================================================== + * Initialize the tree data structures for a new zlib stream. + */ +void ZLIB_INTERNAL _tr_init(s) + deflate_state *s; +{ + tr_static_init(); + + s->l_desc.dyn_tree = s->dyn_ltree; + s->l_desc.stat_desc = &static_l_desc; + + s->d_desc.dyn_tree = s->dyn_dtree; + s->d_desc.stat_desc = &static_d_desc; + + s->bl_desc.dyn_tree = s->bl_tree; + s->bl_desc.stat_desc = &static_bl_desc; + + s->bi_buf = 0; + s->bi_valid = 0; +#ifdef DEBUG + s->compressed_len = 0L; + s->bits_sent = 0L; +#endif + + /* Initialize the first block of the first file: */ + init_block(s); +} + +/* =========================================================================== + * Initialize a new block. + */ +local void init_block(s) + deflate_state *s; +{ + int n; /* iterates over tree elements */ + + /* Initialize the trees. */ + for (n = 0; n < L_CODES; n++) s->dyn_ltree[n].Freq = 0; + for (n = 0; n < D_CODES; n++) s->dyn_dtree[n].Freq = 0; + for (n = 0; n < BL_CODES; n++) s->bl_tree[n].Freq = 0; + + s->dyn_ltree[END_BLOCK].Freq = 1; + s->opt_len = s->static_len = 0L; + s->last_lit = s->matches = 0; +} + +#define SMALLEST 1 +/* Index within the heap array of least frequent node in the Huffman tree */ + + +/* =========================================================================== + * Remove the smallest element from the heap and recreate the heap with + * one less element. Updates heap and heap_len. + */ +#define pqremove(s, tree, top) \ +{\ + top = s->heap[SMALLEST]; \ + s->heap[SMALLEST] = s->heap[s->heap_len--]; \ + pqdownheap(s, tree, SMALLEST); \ +} + +/* =========================================================================== + * Compares to subtrees, using the tree depth as tie breaker when + * the subtrees have equal frequency. This minimizes the worst case length. + */ +#define smaller(tree, n, m, depth) \ + (tree[n].Freq < tree[m].Freq || \ + (tree[n].Freq == tree[m].Freq && depth[n] <= depth[m])) + +/* =========================================================================== + * Restore the heap property by moving down the tree starting at node k, + * exchanging a node with the smallest of its two sons if necessary, stopping + * when the heap property is re-established (each father smaller than its + * two sons). + */ +local void pqdownheap(s, tree, k) + deflate_state *s; + ct_data *tree; /* the tree to restore */ + int k; /* node to move down */ +{ + int v = s->heap[k]; + int j = k << 1; /* left son of k */ + while (j <= s->heap_len) { + /* Set j to the smallest of the two sons: */ + if (j < s->heap_len && + smaller(tree, s->heap[j+1], s->heap[j], s->depth)) { + j++; + } + /* Exit if v is smaller than both sons */ + if (smaller(tree, v, s->heap[j], s->depth)) break; + + /* Exchange v with the smallest son */ + s->heap[k] = s->heap[j]; k = j; + + /* And continue down the tree, setting j to the left son of k */ + j <<= 1; + } + s->heap[k] = v; +} + +/* =========================================================================== + * Compute the optimal bit lengths for a tree and update the total bit length + * for the current block. + * IN assertion: the fields freq and dad are set, heap[heap_max] and + * above are the tree nodes sorted by increasing frequency. + * OUT assertions: the field len is set to the optimal bit length, the + * array bl_count contains the frequencies for each bit length. + * The length opt_len is updated; static_len is also updated if stree is + * not null. + */ +local void gen_bitlen(s, desc) + deflate_state *s; + tree_desc *desc; /* the tree descriptor */ +{ + ct_data *tree = desc->dyn_tree; + int max_code = desc->max_code; + const ct_data *stree = desc->stat_desc->static_tree; + const intf *extra = desc->stat_desc->extra_bits; + int base = desc->stat_desc->extra_base; + int max_length = desc->stat_desc->max_length; + int h; /* heap index */ + int n, m; /* iterate over the tree elements */ + int bits; /* bit length */ + int xbits; /* extra bits */ + ush f; /* frequency */ + int overflow = 0; /* number of elements with bit length too large */ + + for (bits = 0; bits <= MAX_BITS; bits++) s->bl_count[bits] = 0; + + /* In a first pass, compute the optimal bit lengths (which may + * overflow in the case of the bit length tree). + */ + tree[s->heap[s->heap_max]].Len = 0; /* root of the heap */ + + for (h = s->heap_max+1; h < HEAP_SIZE; h++) { + n = s->heap[h]; + bits = tree[tree[n].Dad].Len + 1; + if (bits > max_length) bits = max_length, overflow++; + tree[n].Len = (ush)bits; + /* We overwrite tree[n].Dad which is no longer needed */ + + if (n > max_code) continue; /* not a leaf node */ + + s->bl_count[bits]++; + xbits = 0; + if (n >= base) xbits = extra[n-base]; + f = tree[n].Freq; + s->opt_len += (ulg)f * (bits + xbits); + if (stree) s->static_len += (ulg)f * (stree[n].Len + xbits); + } + if (overflow == 0) return; + + Trace((stderr,"\nbit length overflow\n")); + /* This happens for example on obj2 and pic of the Calgary corpus */ + + /* Find the first bit length which could increase: */ + do { + bits = max_length-1; + while (s->bl_count[bits] == 0) bits--; + s->bl_count[bits]--; /* move one leaf down the tree */ + s->bl_count[bits+1] += 2; /* move one overflow item as its brother */ + s->bl_count[max_length]--; + /* The brother of the overflow item also moves one step up, + * but this does not affect bl_count[max_length] + */ + overflow -= 2; + } while (overflow > 0); + + /* Now recompute all bit lengths, scanning in increasing frequency. + * h is still equal to HEAP_SIZE. (It is simpler to reconstruct all + * lengths instead of fixing only the wrong ones. This idea is taken + * from 'ar' written by Haruhiko Okumura.) + */ + for (bits = max_length; bits != 0; bits--) { + n = s->bl_count[bits]; + while (n != 0) { + m = s->heap[--h]; + if (m > max_code) continue; + if ((unsigned) tree[m].Len != (unsigned) bits) { + Trace((stderr,"code %d bits %d->%d\n", m, tree[m].Len, bits)); + s->opt_len += ((long)bits - (long)tree[m].Len) + *(long)tree[m].Freq; + tree[m].Len = (ush)bits; + } + n--; + } + } +} + +/* =========================================================================== + * Generate the codes for a given tree and bit counts (which need not be + * optimal). + * IN assertion: the array bl_count contains the bit length statistics for + * the given tree and the field len is set for all tree elements. + * OUT assertion: the field code is set for all tree elements of non + * zero code length. + */ +local void gen_codes (tree, max_code, bl_count) + ct_data *tree; /* the tree to decorate */ + int max_code; /* largest code with non zero frequency */ + ushf *bl_count; /* number of codes at each bit length */ +{ + ush next_code[MAX_BITS+1]; /* next code value for each bit length */ + ush code = 0; /* running code value */ + int bits; /* bit index */ + int n; /* code index */ + + /* The distribution counts are first used to generate the code values + * without bit reversal. + */ + for (bits = 1; bits <= MAX_BITS; bits++) { + next_code[bits] = code = (code + bl_count[bits-1]) << 1; + } + /* Check that the bit counts in bl_count are consistent. The last code + * must be all ones. + */ + Assert (code + bl_count[MAX_BITS]-1 == (1<dyn_tree; + const ct_data *stree = desc->stat_desc->static_tree; + int elems = desc->stat_desc->elems; + int n, m; /* iterate over heap elements */ + int max_code = -1; /* largest code with non zero frequency */ + int node; /* new node being created */ + + /* Construct the initial heap, with least frequent element in + * heap[SMALLEST]. The sons of heap[n] are heap[2*n] and heap[2*n+1]. + * heap[0] is not used. + */ + s->heap_len = 0, s->heap_max = HEAP_SIZE; + + for (n = 0; n < elems; n++) { + if (tree[n].Freq != 0) { + s->heap[++(s->heap_len)] = max_code = n; + s->depth[n] = 0; + } else { + tree[n].Len = 0; + } + } + + /* The pkzip format requires that at least one distance code exists, + * and that at least one bit should be sent even if there is only one + * possible code. So to avoid special checks later on we force at least + * two codes of non zero frequency. + */ + while (s->heap_len < 2) { + node = s->heap[++(s->heap_len)] = (max_code < 2 ? ++max_code : 0); + tree[node].Freq = 1; + s->depth[node] = 0; + s->opt_len--; if (stree) s->static_len -= stree[node].Len; + /* node is 0 or 1 so it does not have extra bits */ + } + desc->max_code = max_code; + + /* The elements heap[heap_len/2+1 .. heap_len] are leaves of the tree, + * establish sub-heaps of increasing lengths: + */ + for (n = s->heap_len/2; n >= 1; n--) pqdownheap(s, tree, n); + + /* Construct the Huffman tree by repeatedly combining the least two + * frequent nodes. + */ + node = elems; /* next internal node of the tree */ + do { + pqremove(s, tree, n); /* n = node of least frequency */ + m = s->heap[SMALLEST]; /* m = node of next least frequency */ + + s->heap[--(s->heap_max)] = n; /* keep the nodes sorted by frequency */ + s->heap[--(s->heap_max)] = m; + + /* Create a new node father of n and m */ + tree[node].Freq = tree[n].Freq + tree[m].Freq; + s->depth[node] = (uch)((s->depth[n] >= s->depth[m] ? + s->depth[n] : s->depth[m]) + 1); + tree[n].Dad = tree[m].Dad = (ush)node; +#ifdef DUMP_BL_TREE + if (tree == s->bl_tree) { + fprintf(stderr,"\nnode %d(%d), sons %d(%d) %d(%d)", + node, tree[node].Freq, n, tree[n].Freq, m, tree[m].Freq); + } +#endif + /* and insert the new node in the heap */ + s->heap[SMALLEST] = node++; + pqdownheap(s, tree, SMALLEST); + + } while (s->heap_len >= 2); + + s->heap[--(s->heap_max)] = s->heap[SMALLEST]; + + /* At this point, the fields freq and dad are set. We can now + * generate the bit lengths. + */ + gen_bitlen(s, (tree_desc *)desc); + + /* The field len is now set, we can generate the bit codes */ + gen_codes ((ct_data *)tree, max_code, s->bl_count); +} + +/* =========================================================================== + * Scan a literal or distance tree to determine the frequencies of the codes + * in the bit length tree. + */ +local void scan_tree (s, tree, max_code) + deflate_state *s; + ct_data *tree; /* the tree to be scanned */ + int max_code; /* and its largest code of non zero frequency */ +{ + int n; /* iterates over all tree elements */ + int prevlen = -1; /* last emitted length */ + int curlen; /* length of current code */ + int nextlen = tree[0].Len; /* length of next code */ + int count = 0; /* repeat count of the current code */ + int max_count = 7; /* max repeat count */ + int min_count = 4; /* min repeat count */ + + if (nextlen == 0) max_count = 138, min_count = 3; + tree[max_code+1].Len = (ush)0xffff; /* guard */ + + for (n = 0; n <= max_code; n++) { + curlen = nextlen; nextlen = tree[n+1].Len; + if (++count < max_count && curlen == nextlen) { + continue; + } else if (count < min_count) { + s->bl_tree[curlen].Freq += count; + } else if (curlen != 0) { + if (curlen != prevlen) s->bl_tree[curlen].Freq++; + s->bl_tree[REP_3_6].Freq++; + } else if (count <= 10) { + s->bl_tree[REPZ_3_10].Freq++; + } else { + s->bl_tree[REPZ_11_138].Freq++; + } + count = 0; prevlen = curlen; + if (nextlen == 0) { + max_count = 138, min_count = 3; + } else if (curlen == nextlen) { + max_count = 6, min_count = 3; + } else { + max_count = 7, min_count = 4; + } + } +} + +/* =========================================================================== + * Send a literal or distance tree in compressed form, using the codes in + * bl_tree. + */ +local void send_tree (s, tree, max_code) + deflate_state *s; + ct_data *tree; /* the tree to be scanned */ + int max_code; /* and its largest code of non zero frequency */ +{ + int n; /* iterates over all tree elements */ + int prevlen = -1; /* last emitted length */ + int curlen; /* length of current code */ + int nextlen = tree[0].Len; /* length of next code */ + int count = 0; /* repeat count of the current code */ + int max_count = 7; /* max repeat count */ + int min_count = 4; /* min repeat count */ + + /* tree[max_code+1].Len = -1; */ /* guard already set */ + if (nextlen == 0) max_count = 138, min_count = 3; + + for (n = 0; n <= max_code; n++) { + curlen = nextlen; nextlen = tree[n+1].Len; + if (++count < max_count && curlen == nextlen) { + continue; + } else if (count < min_count) { + do { send_code(s, curlen, s->bl_tree); } while (--count != 0); + + } else if (curlen != 0) { + if (curlen != prevlen) { + send_code(s, curlen, s->bl_tree); count--; + } + Assert(count >= 3 && count <= 6, " 3_6?"); + send_code(s, REP_3_6, s->bl_tree); send_bits(s, count-3, 2); + + } else if (count <= 10) { + send_code(s, REPZ_3_10, s->bl_tree); send_bits(s, count-3, 3); + + } else { + send_code(s, REPZ_11_138, s->bl_tree); send_bits(s, count-11, 7); + } + count = 0; prevlen = curlen; + if (nextlen == 0) { + max_count = 138, min_count = 3; + } else if (curlen == nextlen) { + max_count = 6, min_count = 3; + } else { + max_count = 7, min_count = 4; + } + } +} + +/* =========================================================================== + * Construct the Huffman tree for the bit lengths and return the index in + * bl_order of the last bit length code to send. + */ +local int build_bl_tree(s) + deflate_state *s; +{ + int max_blindex; /* index of last bit length code of non zero freq */ + + /* Determine the bit length frequencies for literal and distance trees */ + scan_tree(s, (ct_data *)s->dyn_ltree, s->l_desc.max_code); + scan_tree(s, (ct_data *)s->dyn_dtree, s->d_desc.max_code); + + /* Build the bit length tree: */ + build_tree(s, (tree_desc *)(&(s->bl_desc))); + /* opt_len now includes the length of the tree representations, except + * the lengths of the bit lengths codes and the 5+5+4 bits for the counts. + */ + + /* Determine the number of bit length codes to send. The pkzip format + * requires that at least 4 bit length codes be sent. (appnote.txt says + * 3 but the actual value used is 4.) + */ + for (max_blindex = BL_CODES-1; max_blindex >= 3; max_blindex--) { + if (s->bl_tree[bl_order[max_blindex]].Len != 0) break; + } + /* Update opt_len to include the bit length tree and counts */ + s->opt_len += 3*(max_blindex+1) + 5+5+4; + Tracev((stderr, "\ndyn trees: dyn %ld, stat %ld", + s->opt_len, s->static_len)); + + return max_blindex; +} + +/* =========================================================================== + * Send the header for a block using dynamic Huffman trees: the counts, the + * lengths of the bit length codes, the literal tree and the distance tree. + * IN assertion: lcodes >= 257, dcodes >= 1, blcodes >= 4. + */ +local void send_all_trees(s, lcodes, dcodes, blcodes) + deflate_state *s; + int lcodes, dcodes, blcodes; /* number of codes for each tree */ +{ + int rank; /* index in bl_order */ + + Assert (lcodes >= 257 && dcodes >= 1 && blcodes >= 4, "not enough codes"); + Assert (lcodes <= L_CODES && dcodes <= D_CODES && blcodes <= BL_CODES, + "too many codes"); + Tracev((stderr, "\nbl counts: ")); + send_bits(s, lcodes-257, 5); /* not +255 as stated in appnote.txt */ + send_bits(s, dcodes-1, 5); + send_bits(s, blcodes-4, 4); /* not -3 as stated in appnote.txt */ + for (rank = 0; rank < blcodes; rank++) { + Tracev((stderr, "\nbl code %2d ", bl_order[rank])); + send_bits(s, s->bl_tree[bl_order[rank]].Len, 3); + } + Tracev((stderr, "\nbl tree: sent %ld", s->bits_sent)); + + send_tree(s, (ct_data *)s->dyn_ltree, lcodes-1); /* literal tree */ + Tracev((stderr, "\nlit tree: sent %ld", s->bits_sent)); + + send_tree(s, (ct_data *)s->dyn_dtree, dcodes-1); /* distance tree */ + Tracev((stderr, "\ndist tree: sent %ld", s->bits_sent)); +} + +/* =========================================================================== + * Send a stored block + */ +void ZLIB_INTERNAL _tr_stored_block(s, buf, stored_len, last) + deflate_state *s; + charf *buf; /* input block */ + ulg stored_len; /* length of input block */ + int last; /* one if this is the last block for a file */ +{ + send_bits(s, (STORED_BLOCK<<1)+last, 3); /* send block type */ +#ifdef DEBUG + s->compressed_len = (s->compressed_len + 3 + 7) & (ulg)~7L; + s->compressed_len += (stored_len + 4) << 3; +#endif + copy_block(s, buf, (unsigned)stored_len, 1); /* with header */ +} + +/* =========================================================================== + * Flush the bits in the bit buffer to pending output (leaves at most 7 bits) + */ +void ZLIB_INTERNAL _tr_flush_bits(s) + deflate_state *s; +{ + bi_flush(s); +} + +/* =========================================================================== + * Send one empty static block to give enough lookahead for inflate. + * This takes 10 bits, of which 7 may remain in the bit buffer. + */ +void ZLIB_INTERNAL _tr_align(s) + deflate_state *s; +{ + send_bits(s, STATIC_TREES<<1, 3); + send_code(s, END_BLOCK, static_ltree); +#ifdef DEBUG + s->compressed_len += 10L; /* 3 for block type, 7 for EOB */ +#endif + bi_flush(s); +} + +/* =========================================================================== + * Determine the best encoding for the current block: dynamic trees, static + * trees or store, and output the encoded block to the zip file. + */ +void ZLIB_INTERNAL _tr_flush_block(s, buf, stored_len, last) + deflate_state *s; + charf *buf; /* input block, or NULL if too old */ + ulg stored_len; /* length of input block */ + int last; /* one if this is the last block for a file */ +{ + ulg opt_lenb, static_lenb; /* opt_len and static_len in bytes */ + int max_blindex = 0; /* index of last bit length code of non zero freq */ + + /* Build the Huffman trees unless a stored block is forced */ + if (s->level > 0) { + + /* Check if the file is binary or text */ + if (s->strm->data_type == Z_UNKNOWN) + s->strm->data_type = detect_data_type(s); + + /* Construct the literal and distance trees */ + build_tree(s, (tree_desc *)(&(s->l_desc))); + Tracev((stderr, "\nlit data: dyn %ld, stat %ld", s->opt_len, + s->static_len)); + + build_tree(s, (tree_desc *)(&(s->d_desc))); + Tracev((stderr, "\ndist data: dyn %ld, stat %ld", s->opt_len, + s->static_len)); + /* At this point, opt_len and static_len are the total bit lengths of + * the compressed block data, excluding the tree representations. + */ + + /* Build the bit length tree for the above two trees, and get the index + * in bl_order of the last bit length code to send. + */ + max_blindex = build_bl_tree(s); + + /* Determine the best encoding. Compute the block lengths in bytes. */ + opt_lenb = (s->opt_len+3+7)>>3; + static_lenb = (s->static_len+3+7)>>3; + + Tracev((stderr, "\nopt %lu(%lu) stat %lu(%lu) stored %lu lit %u ", + opt_lenb, s->opt_len, static_lenb, s->static_len, stored_len, + s->last_lit)); + + if (static_lenb <= opt_lenb) opt_lenb = static_lenb; + + } else { + Assert(buf != (char*)0, "lost buf"); + opt_lenb = static_lenb = stored_len + 5; /* force a stored block */ + } + +#ifdef FORCE_STORED + if (buf != (char*)0) { /* force stored block */ +#else + if (stored_len+4 <= opt_lenb && buf != (char*)0) { + /* 4: two words for the lengths */ +#endif + /* The test buf != NULL is only necessary if LIT_BUFSIZE > WSIZE. + * Otherwise we can't have processed more than WSIZE input bytes since + * the last block flush, because compression would have been + * successful. If LIT_BUFSIZE <= WSIZE, it is never too late to + * transform a block into a stored block. + */ + _tr_stored_block(s, buf, stored_len, last); + +#ifdef FORCE_STATIC + } else if (static_lenb >= 0) { /* force static trees */ +#else + } else if (s->strategy == Z_FIXED || static_lenb == opt_lenb) { +#endif + send_bits(s, (STATIC_TREES<<1)+last, 3); + compress_block(s, (const ct_data *)static_ltree, + (const ct_data *)static_dtree); +#ifdef DEBUG + s->compressed_len += 3 + s->static_len; +#endif + } else { + send_bits(s, (DYN_TREES<<1)+last, 3); + send_all_trees(s, s->l_desc.max_code+1, s->d_desc.max_code+1, + max_blindex+1); + compress_block(s, (const ct_data *)s->dyn_ltree, + (const ct_data *)s->dyn_dtree); +#ifdef DEBUG + s->compressed_len += 3 + s->opt_len; +#endif + } + Assert (s->compressed_len == s->bits_sent, "bad compressed size"); + /* The above check is made mod 2^32, for files larger than 512 MB + * and uLong implemented on 32 bits. + */ + init_block(s); + + if (last) { + bi_windup(s); +#ifdef DEBUG + s->compressed_len += 7; /* align on byte boundary */ +#endif + } + Tracev((stderr,"\ncomprlen %lu(%lu) ", s->compressed_len>>3, + s->compressed_len-7*last)); +} + +/* =========================================================================== + * Save the match info and tally the frequency counts. Return true if + * the current block must be flushed. + */ +int ZLIB_INTERNAL _tr_tally (s, dist, lc) + deflate_state *s; + unsigned dist; /* distance of matched string */ + unsigned lc; /* match length-MIN_MATCH or unmatched char (if dist==0) */ +{ + s->d_buf[s->last_lit] = (ush)dist; + s->l_buf[s->last_lit++] = (uch)lc; + if (dist == 0) { + /* lc is the unmatched char */ + s->dyn_ltree[lc].Freq++; + } else { + s->matches++; + /* Here, lc is the match length - MIN_MATCH */ + dist--; /* dist = match distance - 1 */ + Assert((ush)dist < (ush)MAX_DIST(s) && + (ush)lc <= (ush)(MAX_MATCH-MIN_MATCH) && + (ush)d_code(dist) < (ush)D_CODES, "_tr_tally: bad match"); + + s->dyn_ltree[_length_code[lc]+LITERALS+1].Freq++; + s->dyn_dtree[d_code(dist)].Freq++; + } + +#ifdef TRUNCATE_BLOCK + /* Try to guess if it is profitable to stop the current block here */ + if ((s->last_lit & 0x1fff) == 0 && s->level > 2) { + /* Compute an upper bound for the compressed length */ + ulg out_length = (ulg)s->last_lit*8L; + ulg in_length = (ulg)((long)s->strstart - s->block_start); + int dcode; + for (dcode = 0; dcode < D_CODES; dcode++) { + out_length += (ulg)s->dyn_dtree[dcode].Freq * + (5L+extra_dbits[dcode]); + } + out_length >>= 3; + Tracev((stderr,"\nlast_lit %u, in %ld, out ~%ld(%ld%%) ", + s->last_lit, in_length, out_length, + 100L - out_length*100L/in_length)); + if (s->matches < s->last_lit/2 && out_length < in_length/2) return 1; + } +#endif + return (s->last_lit == s->lit_bufsize-1); + /* We avoid equality with lit_bufsize because of wraparound at 64K + * on 16 bit machines and because stored blocks are restricted to + * 64K-1 bytes. + */ +} + +/* =========================================================================== + * Send the block data compressed using the given Huffman trees + */ +local void compress_block(s, ltree, dtree) + deflate_state *s; + const ct_data *ltree; /* literal tree */ + const ct_data *dtree; /* distance tree */ +{ + unsigned dist; /* distance of matched string */ + int lc; /* match length or unmatched char (if dist == 0) */ + unsigned lx = 0; /* running index in l_buf */ + unsigned code; /* the code to send */ + int extra; /* number of extra bits to send */ + + if (s->last_lit != 0) do { + dist = s->d_buf[lx]; + lc = s->l_buf[lx++]; + if (dist == 0) { + send_code(s, lc, ltree); /* send a literal byte */ + Tracecv(isgraph(lc), (stderr," '%c' ", lc)); + } else { + /* Here, lc is the match length - MIN_MATCH */ + code = _length_code[lc]; + send_code(s, code+LITERALS+1, ltree); /* send the length code */ + extra = extra_lbits[code]; + if (extra != 0) { + lc -= base_length[code]; + send_bits(s, lc, extra); /* send the extra length bits */ + } + dist--; /* dist is now the match distance - 1 */ + code = d_code(dist); + Assert (code < D_CODES, "bad d_code"); + + send_code(s, code, dtree); /* send the distance code */ + extra = extra_dbits[code]; + if (extra != 0) { + dist -= base_dist[code]; + send_bits(s, dist, extra); /* send the extra distance bits */ + } + } /* literal or match pair ? */ + + /* Check that the overlay between pending_buf and d_buf+l_buf is ok: */ + Assert((uInt)(s->pending) < s->lit_bufsize + 2*lx, + "pendingBuf overflow"); + + } while (lx < s->last_lit); + + send_code(s, END_BLOCK, ltree); +} + +/* =========================================================================== + * Check if the data type is TEXT or BINARY, using the following algorithm: + * - TEXT if the two conditions below are satisfied: + * a) There are no non-portable control characters belonging to the + * "black list" (0..6, 14..25, 28..31). + * b) There is at least one printable character belonging to the + * "white list" (9 {TAB}, 10 {LF}, 13 {CR}, 32..255). + * - BINARY otherwise. + * - The following partially-portable control characters form a + * "gray list" that is ignored in this detection algorithm: + * (7 {BEL}, 8 {BS}, 11 {VT}, 12 {FF}, 26 {SUB}, 27 {ESC}). + * IN assertion: the fields Freq of dyn_ltree are set. + */ +local int detect_data_type(s) + deflate_state *s; +{ + /* black_mask is the bit mask of black-listed bytes + * set bits 0..6, 14..25, and 28..31 + * 0xf3ffc07f = binary 11110011111111111100000001111111 + */ + unsigned long black_mask = 0xf3ffc07fUL; + int n; + + /* Check for non-textual ("black-listed") bytes. */ + for (n = 0; n <= 31; n++, black_mask >>= 1) + if ((black_mask & 1) && (s->dyn_ltree[n].Freq != 0)) + return Z_BINARY; + + /* Check for textual ("white-listed") bytes. */ + if (s->dyn_ltree[9].Freq != 0 || s->dyn_ltree[10].Freq != 0 + || s->dyn_ltree[13].Freq != 0) + return Z_TEXT; + for (n = 32; n < LITERALS; n++) + if (s->dyn_ltree[n].Freq != 0) + return Z_TEXT; + + /* There are no "black-listed" or "white-listed" bytes: + * this stream either is empty or has tolerated ("gray-listed") bytes only. + */ + return Z_BINARY; +} + +/* =========================================================================== + * Reverse the first len bits of a code, using straightforward code (a faster + * method would use a table) + * IN assertion: 1 <= len <= 15 + */ +local unsigned bi_reverse(code, len) + unsigned code; /* the value to invert */ + int len; /* its bit length */ +{ + register unsigned res = 0; + do { + res |= code & 1; + code >>= 1, res <<= 1; + } while (--len > 0); + return res >> 1; +} + +/* =========================================================================== + * Flush the bit buffer, keeping at most 7 bits in it. + */ +local void bi_flush(s) + deflate_state *s; +{ + if (s->bi_valid == 16) { + put_short(s, s->bi_buf); + s->bi_buf = 0; + s->bi_valid = 0; + } else if (s->bi_valid >= 8) { + put_byte(s, (Byte)s->bi_buf); + s->bi_buf >>= 8; + s->bi_valid -= 8; + } +} + +/* =========================================================================== + * Flush the bit buffer and align the output on a byte boundary + */ +local void bi_windup(s) + deflate_state *s; +{ + if (s->bi_valid > 8) { + put_short(s, s->bi_buf); + } else if (s->bi_valid > 0) { + put_byte(s, (Byte)s->bi_buf); + } + s->bi_buf = 0; + s->bi_valid = 0; +#ifdef DEBUG + s->bits_sent = (s->bits_sent+7) & ~7; +#endif +} + +/* =========================================================================== + * Copy a stored block, storing first the length and its + * one's complement if requested. + */ +local void copy_block(s, buf, len, header) + deflate_state *s; + charf *buf; /* the input data */ + unsigned len; /* its length */ + int header; /* true if block header must be written */ +{ + bi_windup(s); /* align on byte boundary */ + + if (header) { + put_short(s, (ush)len); + put_short(s, (ush)~len); +#ifdef DEBUG + s->bits_sent += 2*16; +#endif + } +#ifdef DEBUG + s->bits_sent += (ulg)len<<3; +#endif + while (len--) { + put_byte(s, *buf++); + } +} diff --git a/software/scsi2sd-util/zlib-1.2.8/trees.h b/software/scsi2sd-util/zlib-1.2.8/trees.h new file mode 100644 index 0000000..d35639d --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/trees.h @@ -0,0 +1,128 @@ +/* header created automatically with -DGEN_TREES_H */ + +local const ct_data static_ltree[L_CODES+2] = { +{{ 12},{ 8}}, {{140},{ 8}}, {{ 76},{ 8}}, {{204},{ 8}}, {{ 44},{ 8}}, +{{172},{ 8}}, {{108},{ 8}}, {{236},{ 8}}, {{ 28},{ 8}}, {{156},{ 8}}, +{{ 92},{ 8}}, {{220},{ 8}}, {{ 60},{ 8}}, {{188},{ 8}}, {{124},{ 8}}, +{{252},{ 8}}, {{ 2},{ 8}}, {{130},{ 8}}, {{ 66},{ 8}}, {{194},{ 8}}, +{{ 34},{ 8}}, {{162},{ 8}}, {{ 98},{ 8}}, {{226},{ 8}}, {{ 18},{ 8}}, +{{146},{ 8}}, {{ 82},{ 8}}, {{210},{ 8}}, {{ 50},{ 8}}, {{178},{ 8}}, +{{114},{ 8}}, {{242},{ 8}}, {{ 10},{ 8}}, {{138},{ 8}}, {{ 74},{ 8}}, +{{202},{ 8}}, {{ 42},{ 8}}, {{170},{ 8}}, {{106},{ 8}}, {{234},{ 8}}, +{{ 26},{ 8}}, {{154},{ 8}}, {{ 90},{ 8}}, {{218},{ 8}}, {{ 58},{ 8}}, +{{186},{ 8}}, {{122},{ 8}}, {{250},{ 8}}, {{ 6},{ 8}}, {{134},{ 8}}, +{{ 70},{ 8}}, {{198},{ 8}}, {{ 38},{ 8}}, {{166},{ 8}}, {{102},{ 8}}, +{{230},{ 8}}, {{ 22},{ 8}}, {{150},{ 8}}, {{ 86},{ 8}}, {{214},{ 8}}, +{{ 54},{ 8}}, {{182},{ 8}}, {{118},{ 8}}, {{246},{ 8}}, {{ 14},{ 8}}, +{{142},{ 8}}, {{ 78},{ 8}}, {{206},{ 8}}, {{ 46},{ 8}}, {{174},{ 8}}, +{{110},{ 8}}, {{238},{ 8}}, {{ 30},{ 8}}, {{158},{ 8}}, {{ 94},{ 8}}, +{{222},{ 8}}, {{ 62},{ 8}}, {{190},{ 8}}, {{126},{ 8}}, {{254},{ 8}}, +{{ 1},{ 8}}, {{129},{ 8}}, {{ 65},{ 8}}, {{193},{ 8}}, {{ 33},{ 8}}, +{{161},{ 8}}, {{ 97},{ 8}}, {{225},{ 8}}, {{ 17},{ 8}}, {{145},{ 8}}, +{{ 81},{ 8}}, {{209},{ 8}}, {{ 49},{ 8}}, {{177},{ 8}}, {{113},{ 8}}, +{{241},{ 8}}, {{ 9},{ 8}}, {{137},{ 8}}, {{ 73},{ 8}}, {{201},{ 8}}, +{{ 41},{ 8}}, {{169},{ 8}}, {{105},{ 8}}, {{233},{ 8}}, {{ 25},{ 8}}, +{{153},{ 8}}, {{ 89},{ 8}}, {{217},{ 8}}, {{ 57},{ 8}}, {{185},{ 8}}, +{{121},{ 8}}, {{249},{ 8}}, {{ 5},{ 8}}, {{133},{ 8}}, {{ 69},{ 8}}, +{{197},{ 8}}, {{ 37},{ 8}}, {{165},{ 8}}, {{101},{ 8}}, {{229},{ 8}}, +{{ 21},{ 8}}, {{149},{ 8}}, {{ 85},{ 8}}, {{213},{ 8}}, {{ 53},{ 8}}, +{{181},{ 8}}, {{117},{ 8}}, {{245},{ 8}}, {{ 13},{ 8}}, {{141},{ 8}}, +{{ 77},{ 8}}, {{205},{ 8}}, {{ 45},{ 8}}, {{173},{ 8}}, {{109},{ 8}}, +{{237},{ 8}}, {{ 29},{ 8}}, {{157},{ 8}}, {{ 93},{ 8}}, {{221},{ 8}}, +{{ 61},{ 8}}, {{189},{ 8}}, {{125},{ 8}}, {{253},{ 8}}, {{ 19},{ 9}}, +{{275},{ 9}}, {{147},{ 9}}, {{403},{ 9}}, {{ 83},{ 9}}, {{339},{ 9}}, +{{211},{ 9}}, {{467},{ 9}}, {{ 51},{ 9}}, {{307},{ 9}}, {{179},{ 9}}, +{{435},{ 9}}, {{115},{ 9}}, {{371},{ 9}}, {{243},{ 9}}, {{499},{ 9}}, +{{ 11},{ 9}}, {{267},{ 9}}, {{139},{ 9}}, {{395},{ 9}}, {{ 75},{ 9}}, +{{331},{ 9}}, {{203},{ 9}}, {{459},{ 9}}, {{ 43},{ 9}}, {{299},{ 9}}, +{{171},{ 9}}, {{427},{ 9}}, {{107},{ 9}}, {{363},{ 9}}, {{235},{ 9}}, +{{491},{ 9}}, {{ 27},{ 9}}, {{283},{ 9}}, {{155},{ 9}}, {{411},{ 9}}, +{{ 91},{ 9}}, {{347},{ 9}}, {{219},{ 9}}, {{475},{ 9}}, {{ 59},{ 9}}, +{{315},{ 9}}, {{187},{ 9}}, {{443},{ 9}}, {{123},{ 9}}, {{379},{ 9}}, +{{251},{ 9}}, {{507},{ 9}}, {{ 7},{ 9}}, {{263},{ 9}}, {{135},{ 9}}, +{{391},{ 9}}, {{ 71},{ 9}}, {{327},{ 9}}, {{199},{ 9}}, {{455},{ 9}}, +{{ 39},{ 9}}, {{295},{ 9}}, {{167},{ 9}}, {{423},{ 9}}, {{103},{ 9}}, +{{359},{ 9}}, {{231},{ 9}}, {{487},{ 9}}, {{ 23},{ 9}}, {{279},{ 9}}, +{{151},{ 9}}, {{407},{ 9}}, {{ 87},{ 9}}, {{343},{ 9}}, {{215},{ 9}}, +{{471},{ 9}}, {{ 55},{ 9}}, {{311},{ 9}}, {{183},{ 9}}, {{439},{ 9}}, +{{119},{ 9}}, {{375},{ 9}}, {{247},{ 9}}, {{503},{ 9}}, {{ 15},{ 9}}, +{{271},{ 9}}, {{143},{ 9}}, {{399},{ 9}}, {{ 79},{ 9}}, {{335},{ 9}}, +{{207},{ 9}}, {{463},{ 9}}, {{ 47},{ 9}}, {{303},{ 9}}, {{175},{ 9}}, +{{431},{ 9}}, {{111},{ 9}}, {{367},{ 9}}, {{239},{ 9}}, {{495},{ 9}}, +{{ 31},{ 9}}, {{287},{ 9}}, {{159},{ 9}}, {{415},{ 9}}, {{ 95},{ 9}}, +{{351},{ 9}}, {{223},{ 9}}, {{479},{ 9}}, {{ 63},{ 9}}, {{319},{ 9}}, +{{191},{ 9}}, {{447},{ 9}}, {{127},{ 9}}, {{383},{ 9}}, {{255},{ 9}}, +{{511},{ 9}}, {{ 0},{ 7}}, {{ 64},{ 7}}, {{ 32},{ 7}}, {{ 96},{ 7}}, +{{ 16},{ 7}}, {{ 80},{ 7}}, {{ 48},{ 7}}, {{112},{ 7}}, {{ 8},{ 7}}, +{{ 72},{ 7}}, {{ 40},{ 7}}, {{104},{ 7}}, {{ 24},{ 7}}, {{ 88},{ 7}}, +{{ 56},{ 7}}, {{120},{ 7}}, {{ 4},{ 7}}, {{ 68},{ 7}}, {{ 36},{ 7}}, +{{100},{ 7}}, {{ 20},{ 7}}, {{ 84},{ 7}}, {{ 52},{ 7}}, {{116},{ 7}}, +{{ 3},{ 8}}, {{131},{ 8}}, {{ 67},{ 8}}, {{195},{ 8}}, {{ 35},{ 8}}, +{{163},{ 8}}, {{ 99},{ 8}}, {{227},{ 8}} +}; + +local const ct_data static_dtree[D_CODES] = { +{{ 0},{ 5}}, {{16},{ 5}}, {{ 8},{ 5}}, {{24},{ 5}}, {{ 4},{ 5}}, +{{20},{ 5}}, {{12},{ 5}}, {{28},{ 5}}, {{ 2},{ 5}}, {{18},{ 5}}, +{{10},{ 5}}, {{26},{ 5}}, {{ 6},{ 5}}, {{22},{ 5}}, {{14},{ 5}}, +{{30},{ 5}}, {{ 1},{ 5}}, {{17},{ 5}}, {{ 9},{ 5}}, {{25},{ 5}}, +{{ 5},{ 5}}, {{21},{ 5}}, {{13},{ 5}}, {{29},{ 5}}, {{ 3},{ 5}}, +{{19},{ 5}}, {{11},{ 5}}, {{27},{ 5}}, {{ 7},{ 5}}, {{23},{ 5}} +}; + +const uch ZLIB_INTERNAL _dist_code[DIST_CODE_LEN] = { + 0, 1, 2, 3, 4, 4, 5, 5, 6, 6, 6, 6, 7, 7, 7, 7, 8, 8, 8, 8, + 8, 8, 8, 8, 9, 9, 9, 9, 9, 9, 9, 9, 10, 10, 10, 10, 10, 10, 10, 10, +10, 10, 10, 10, 10, 10, 10, 10, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, +11, 11, 11, 11, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, +12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 13, 13, 13, 13, +13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, +13, 13, 13, 13, 13, 13, 13, 13, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, +14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, +14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, +14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 15, 15, 15, 15, 15, 15, 15, 15, +15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, +15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, +15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 0, 0, 16, 17, +18, 18, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 22, 22, 22, 22, 22, 22, 22, 22, +23, 23, 23, 23, 23, 23, 23, 23, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, +24, 24, 24, 24, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, +26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, +26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 27, 27, 27, 27, 27, 27, 27, 27, +27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, +27, 27, 27, 27, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, +28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, +28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, +28, 28, 28, 28, 28, 28, 28, 28, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, +29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, +29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, +29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29 +}; + +const uch ZLIB_INTERNAL _length_code[MAX_MATCH-MIN_MATCH+1]= { + 0, 1, 2, 3, 4, 5, 6, 7, 8, 8, 9, 9, 10, 10, 11, 11, 12, 12, 12, 12, +13, 13, 13, 13, 14, 14, 14, 14, 15, 15, 15, 15, 16, 16, 16, 16, 16, 16, 16, 16, +17, 17, 17, 17, 17, 17, 17, 17, 18, 18, 18, 18, 18, 18, 18, 18, 19, 19, 19, 19, +19, 19, 19, 19, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, +21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 22, 22, 22, 22, +22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 23, 23, 23, 23, 23, 23, 23, 23, +23, 23, 23, 23, 23, 23, 23, 23, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, +24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, +25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, +25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 26, 26, 26, 26, 26, 26, 26, 26, +26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, +26, 26, 26, 26, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, +27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 28 +}; + +local const int base_length[LENGTH_CODES] = { +0, 1, 2, 3, 4, 5, 6, 7, 8, 10, 12, 14, 16, 20, 24, 28, 32, 40, 48, 56, +64, 80, 96, 112, 128, 160, 192, 224, 0 +}; + +local const int base_dist[D_CODES] = { + 0, 1, 2, 3, 4, 6, 8, 12, 16, 24, + 32, 48, 64, 96, 128, 192, 256, 384, 512, 768, + 1024, 1536, 2048, 3072, 4096, 6144, 8192, 12288, 16384, 24576 +}; + diff --git a/software/scsi2sd-util/zlib-1.2.8/uncompr.c b/software/scsi2sd-util/zlib-1.2.8/uncompr.c new file mode 100644 index 0000000..242e949 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/uncompr.c @@ -0,0 +1,59 @@ +/* uncompr.c -- decompress a memory buffer + * Copyright (C) 1995-2003, 2010 Jean-loup Gailly. + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* @(#) $Id$ */ + +#define ZLIB_INTERNAL +#include "zlib.h" + +/* =========================================================================== + Decompresses the source buffer into the destination buffer. sourceLen is + the byte length of the source buffer. Upon entry, destLen is the total + size of the destination buffer, which must be large enough to hold the + entire uncompressed data. (The size of the uncompressed data must have + been saved previously by the compressor and transmitted to the decompressor + by some mechanism outside the scope of this compression library.) + Upon exit, destLen is the actual size of the compressed buffer. + + uncompress returns Z_OK if success, Z_MEM_ERROR if there was not + enough memory, Z_BUF_ERROR if there was not enough room in the output + buffer, or Z_DATA_ERROR if the input data was corrupted. +*/ +int ZEXPORT uncompress (dest, destLen, source, sourceLen) + Bytef *dest; + uLongf *destLen; + const Bytef *source; + uLong sourceLen; +{ + z_stream stream; + int err; + + stream.next_in = (z_const Bytef *)source; + stream.avail_in = (uInt)sourceLen; + /* Check for source > 64K on 16-bit machine: */ + if ((uLong)stream.avail_in != sourceLen) return Z_BUF_ERROR; + + stream.next_out = dest; + stream.avail_out = (uInt)*destLen; + if ((uLong)stream.avail_out != *destLen) return Z_BUF_ERROR; + + stream.zalloc = (alloc_func)0; + stream.zfree = (free_func)0; + + err = inflateInit(&stream); + if (err != Z_OK) return err; + + err = inflate(&stream, Z_FINISH); + if (err != Z_STREAM_END) { + inflateEnd(&stream); + if (err == Z_NEED_DICT || (err == Z_BUF_ERROR && stream.avail_in == 0)) + return Z_DATA_ERROR; + return err; + } + *destLen = stream.total_out; + + err = inflateEnd(&stream); + return err; +} diff --git a/software/scsi2sd-util/zlib-1.2.8/watcom/watcom_f.mak b/software/scsi2sd-util/zlib-1.2.8/watcom/watcom_f.mak new file mode 100644 index 0000000..37f4d74 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/watcom/watcom_f.mak @@ -0,0 +1,43 @@ +# Makefile for zlib +# OpenWatcom flat model +# Last updated: 28-Dec-2005 + +# To use, do "wmake -f watcom_f.mak" + +C_SOURCE = adler32.c compress.c crc32.c deflate.c & + gzclose.c gzlib.c gzread.c gzwrite.c & + infback.c inffast.c inflate.c inftrees.c & + trees.c uncompr.c zutil.c + +OBJS = adler32.obj compress.obj crc32.obj deflate.obj & + gzclose.obj gzlib.obj gzread.obj gzwrite.obj & + infback.obj inffast.obj inflate.obj inftrees.obj & + trees.obj uncompr.obj zutil.obj + +CC = wcc386 +LINKER = wcl386 +CFLAGS = -zq -mf -3r -fp3 -s -bt=dos -oilrtfm -fr=nul -wx +ZLIB_LIB = zlib_f.lib + +.C.OBJ: + $(CC) $(CFLAGS) $[@ + +all: $(ZLIB_LIB) example.exe minigzip.exe + +$(ZLIB_LIB): $(OBJS) + wlib -b -c $(ZLIB_LIB) -+adler32.obj -+compress.obj -+crc32.obj + wlib -b -c $(ZLIB_LIB) -+gzclose.obj -+gzlib.obj -+gzread.obj -+gzwrite.obj + wlib -b -c $(ZLIB_LIB) -+deflate.obj -+infback.obj + wlib -b -c $(ZLIB_LIB) -+inffast.obj -+inflate.obj -+inftrees.obj + wlib -b -c $(ZLIB_LIB) -+trees.obj -+uncompr.obj -+zutil.obj + +example.exe: $(ZLIB_LIB) example.obj + $(LINKER) -ldos32a -fe=example.exe example.obj $(ZLIB_LIB) + +minigzip.exe: $(ZLIB_LIB) minigzip.obj + $(LINKER) -ldos32a -fe=minigzip.exe minigzip.obj $(ZLIB_LIB) + +clean: .SYMBOLIC + del *.obj + del $(ZLIB_LIB) + @echo Cleaning done diff --git a/software/scsi2sd-util/zlib-1.2.8/watcom/watcom_l.mak b/software/scsi2sd-util/zlib-1.2.8/watcom/watcom_l.mak new file mode 100644 index 0000000..193eed7 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/watcom/watcom_l.mak @@ -0,0 +1,43 @@ +# Makefile for zlib +# OpenWatcom large model +# Last updated: 28-Dec-2005 + +# To use, do "wmake -f watcom_l.mak" + +C_SOURCE = adler32.c compress.c crc32.c deflate.c & + gzclose.c gzlib.c gzread.c gzwrite.c & + infback.c inffast.c inflate.c inftrees.c & + trees.c uncompr.c zutil.c + +OBJS = adler32.obj compress.obj crc32.obj deflate.obj & + gzclose.obj gzlib.obj gzread.obj gzwrite.obj & + infback.obj inffast.obj inflate.obj inftrees.obj & + trees.obj uncompr.obj zutil.obj + +CC = wcc +LINKER = wcl +CFLAGS = -zq -ml -s -bt=dos -oilrtfm -fr=nul -wx +ZLIB_LIB = zlib_l.lib + +.C.OBJ: + $(CC) $(CFLAGS) $[@ + +all: $(ZLIB_LIB) example.exe minigzip.exe + +$(ZLIB_LIB): $(OBJS) + wlib -b -c $(ZLIB_LIB) -+adler32.obj -+compress.obj -+crc32.obj + wlib -b -c $(ZLIB_LIB) -+gzclose.obj -+gzlib.obj -+gzread.obj -+gzwrite.obj + wlib -b -c $(ZLIB_LIB) -+deflate.obj -+infback.obj + wlib -b -c $(ZLIB_LIB) -+inffast.obj -+inflate.obj -+inftrees.obj + wlib -b -c $(ZLIB_LIB) -+trees.obj -+uncompr.obj -+zutil.obj + +example.exe: $(ZLIB_LIB) example.obj + $(LINKER) -fe=example.exe example.obj $(ZLIB_LIB) + +minigzip.exe: $(ZLIB_LIB) minigzip.obj + $(LINKER) -fe=minigzip.exe minigzip.obj $(ZLIB_LIB) + +clean: .SYMBOLIC + del *.obj + del $(ZLIB_LIB) + @echo Cleaning done diff --git a/software/scsi2sd-util/zlib-1.2.8/win32/DLL_FAQ.txt b/software/scsi2sd-util/zlib-1.2.8/win32/DLL_FAQ.txt new file mode 100644 index 0000000..12c0090 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/win32/DLL_FAQ.txt @@ -0,0 +1,397 @@ + + Frequently Asked Questions about ZLIB1.DLL + + +This document describes the design, the rationale, and the usage +of the official DLL build of zlib, named ZLIB1.DLL. If you have +general questions about zlib, you should see the file "FAQ" found +in the zlib distribution, or at the following location: + http://www.gzip.org/zlib/zlib_faq.html + + + 1. What is ZLIB1.DLL, and how can I get it? + + - ZLIB1.DLL is the official build of zlib as a DLL. + (Please remark the character '1' in the name.) + + Pointers to a precompiled ZLIB1.DLL can be found in the zlib + web site at: + http://www.zlib.net/ + + Applications that link to ZLIB1.DLL can rely on the following + specification: + + * The exported symbols are exclusively defined in the source + files "zlib.h" and "zlib.def", found in an official zlib + source distribution. + * The symbols are exported by name, not by ordinal. + * The exported names are undecorated. + * The calling convention of functions is "C" (CDECL). + * The ZLIB1.DLL binary is linked to MSVCRT.DLL. + + The archive in which ZLIB1.DLL is bundled contains compiled + test programs that must run with a valid build of ZLIB1.DLL. + It is recommended to download the prebuilt DLL from the zlib + web site, instead of building it yourself, to avoid potential + incompatibilities that could be introduced by your compiler + and build settings. If you do build the DLL yourself, please + make sure that it complies with all the above requirements, + and it runs with the precompiled test programs, bundled with + the original ZLIB1.DLL distribution. + + If, for any reason, you need to build an incompatible DLL, + please use a different file name. + + + 2. Why did you change the name of the DLL to ZLIB1.DLL? + What happened to the old ZLIB.DLL? + + - The old ZLIB.DLL, built from zlib-1.1.4 or earlier, required + compilation settings that were incompatible to those used by + a static build. The DLL settings were supposed to be enabled + by defining the macro ZLIB_DLL, before including "zlib.h". + Incorrect handling of this macro was silently accepted at + build time, resulting in two major problems: + + * ZLIB_DLL was missing from the old makefile. When building + the DLL, not all people added it to the build options. In + consequence, incompatible incarnations of ZLIB.DLL started + to circulate around the net. + + * When switching from using the static library to using the + DLL, applications had to define the ZLIB_DLL macro and + to recompile all the sources that contained calls to zlib + functions. Failure to do so resulted in creating binaries + that were unable to run with the official ZLIB.DLL build. + + The only possible solution that we could foresee was to make + a binary-incompatible change in the DLL interface, in order to + remove the dependency on the ZLIB_DLL macro, and to release + the new DLL under a different name. + + We chose the name ZLIB1.DLL, where '1' indicates the major + zlib version number. We hope that we will not have to break + the binary compatibility again, at least not as long as the + zlib-1.x series will last. + + There is still a ZLIB_DLL macro, that can trigger a more + efficient build and use of the DLL, but compatibility no + longer dependents on it. + + + 3. Can I build ZLIB.DLL from the new zlib sources, and replace + an old ZLIB.DLL, that was built from zlib-1.1.4 or earlier? + + - In principle, you can do it by assigning calling convention + keywords to the macros ZEXPORT and ZEXPORTVA. In practice, + it depends on what you mean by "an old ZLIB.DLL", because the + old DLL exists in several mutually-incompatible versions. + You have to find out first what kind of calling convention is + being used in your particular ZLIB.DLL build, and to use the + same one in the new build. If you don't know what this is all + about, you might be better off if you would just leave the old + DLL intact. + + + 4. Can I compile my application using the new zlib interface, and + link it to an old ZLIB.DLL, that was built from zlib-1.1.4 or + earlier? + + - The official answer is "no"; the real answer depends again on + what kind of ZLIB.DLL you have. Even if you are lucky, this + course of action is unreliable. + + If you rebuild your application and you intend to use a newer + version of zlib (post- 1.1.4), it is strongly recommended to + link it to the new ZLIB1.DLL. + + + 5. Why are the zlib symbols exported by name, and not by ordinal? + + - Although exporting symbols by ordinal is a little faster, it + is risky. Any single glitch in the maintenance or use of the + DEF file that contains the ordinals can result in incompatible + builds and frustrating crashes. Simply put, the benefits of + exporting symbols by ordinal do not justify the risks. + + Technically, it should be possible to maintain ordinals in + the DEF file, and still export the symbols by name. Ordinals + exist in every DLL, and even if the dynamic linking performed + at the DLL startup is searching for names, ordinals serve as + hints, for a faster name lookup. However, if the DEF file + contains ordinals, the Microsoft linker automatically builds + an implib that will cause the executables linked to it to use + those ordinals, and not the names. It is interesting to + notice that the GNU linker for Win32 does not suffer from this + problem. + + It is possible to avoid the DEF file if the exported symbols + are accompanied by a "__declspec(dllexport)" attribute in the + source files. You can do this in zlib by predefining the + ZLIB_DLL macro. + + + 6. I see that the ZLIB1.DLL functions use the "C" (CDECL) calling + convention. Why not use the STDCALL convention? + STDCALL is the standard convention in Win32, and I need it in + my Visual Basic project! + + (For readability, we use CDECL to refer to the convention + triggered by the "__cdecl" keyword, STDCALL to refer to + the convention triggered by "__stdcall", and FASTCALL to + refer to the convention triggered by "__fastcall".) + + - Most of the native Windows API functions (without varargs) use + indeed the WINAPI convention (which translates to STDCALL in + Win32), but the standard C functions use CDECL. If a user + application is intrinsically tied to the Windows API (e.g. + it calls native Windows API functions such as CreateFile()), + sometimes it makes sense to decorate its own functions with + WINAPI. But if ANSI C or POSIX portability is a goal (e.g. + it calls standard C functions such as fopen()), it is not a + sound decision to request the inclusion of , or to + use non-ANSI constructs, for the sole purpose to make the user + functions STDCALL-able. + + The functionality offered by zlib is not in the category of + "Windows functionality", but is more like "C functionality". + + Technically, STDCALL is not bad; in fact, it is slightly + faster than CDECL, and it works with variable-argument + functions, just like CDECL. It is unfortunate that, in spite + of using STDCALL in the Windows API, it is not the default + convention used by the C compilers that run under Windows. + The roots of the problem reside deep inside the unsafety of + the K&R-style function prototypes, where the argument types + are not specified; but that is another story for another day. + + The remaining fact is that CDECL is the default convention. + Even if an explicit convention is hard-coded into the function + prototypes inside C headers, problems may appear. The + necessity to expose the convention in users' callbacks is one + of these problems. + + The calling convention issues are also important when using + zlib in other programming languages. Some of them, like Ada + (GNAT) and Fortran (GNU G77), have C bindings implemented + initially on Unix, and relying on the C calling convention. + On the other hand, the pre- .NET versions of Microsoft Visual + Basic require STDCALL, while Borland Delphi prefers, although + it does not require, FASTCALL. + + In fairness to all possible uses of zlib outside the C + programming language, we choose the default "C" convention. + Anyone interested in different bindings or conventions is + encouraged to maintain specialized projects. The "contrib/" + directory from the zlib distribution already holds a couple + of foreign bindings, such as Ada, C++, and Delphi. + + + 7. I need a DLL for my Visual Basic project. What can I do? + + - Define the ZLIB_WINAPI macro before including "zlib.h", when + building both the DLL and the user application (except that + you don't need to define anything when using the DLL in Visual + Basic). The ZLIB_WINAPI macro will switch on the WINAPI + (STDCALL) convention. The name of this DLL must be different + than the official ZLIB1.DLL. + + Gilles Vollant has contributed a build named ZLIBWAPI.DLL, + with the ZLIB_WINAPI macro turned on, and with the minizip + functionality built in. For more information, please read + the notes inside "contrib/vstudio/readme.txt", found in the + zlib distribution. + + + 8. I need to use zlib in my Microsoft .NET project. What can I + do? + + - Henrik Ravn has contributed a .NET wrapper around zlib. Look + into contrib/dotzlib/, inside the zlib distribution. + + + 9. If my application uses ZLIB1.DLL, should I link it to + MSVCRT.DLL? Why? + + - It is not required, but it is recommended to link your + application to MSVCRT.DLL, if it uses ZLIB1.DLL. + + The executables (.EXE, .DLL, etc.) that are involved in the + same process and are using the C run-time library (i.e. they + are calling standard C functions), must link to the same + library. There are several libraries in the Win32 system: + CRTDLL.DLL, MSVCRT.DLL, the static C libraries, etc. + Since ZLIB1.DLL is linked to MSVCRT.DLL, the executables that + depend on it should also be linked to MSVCRT.DLL. + + +10. Why are you saying that ZLIB1.DLL and my application should + be linked to the same C run-time (CRT) library? I linked my + application and my DLLs to different C libraries (e.g. my + application to a static library, and my DLLs to MSVCRT.DLL), + and everything works fine. + + - If a user library invokes only pure Win32 API (accessible via + and the related headers), its DLL build will work + in any context. But if this library invokes standard C API, + things get more complicated. + + There is a single Win32 library in a Win32 system. Every + function in this library resides in a single DLL module, that + is safe to call from anywhere. On the other hand, there are + multiple versions of the C library, and each of them has its + own separate internal state. Standalone executables and user + DLLs that call standard C functions must link to a C run-time + (CRT) library, be it static or shared (DLL). Intermixing + occurs when an executable (not necessarily standalone) and a + DLL are linked to different CRTs, and both are running in the + same process. + + Intermixing multiple CRTs is possible, as long as their + internal states are kept intact. The Microsoft Knowledge Base + articles KB94248 "HOWTO: Use the C Run-Time" and KB140584 + "HOWTO: Link with the Correct C Run-Time (CRT) Library" + mention the potential problems raised by intermixing. + + If intermixing works for you, it's because your application + and DLLs are avoiding the corruption of each of the CRTs' + internal states, maybe by careful design, or maybe by fortune. + + Also note that linking ZLIB1.DLL to non-Microsoft CRTs, such + as those provided by Borland, raises similar problems. + + +11. Why are you linking ZLIB1.DLL to MSVCRT.DLL? + + - MSVCRT.DLL exists on every Windows 95 with a new service pack + installed, or with Microsoft Internet Explorer 4 or later, and + on all other Windows 4.x or later (Windows 98, Windows NT 4, + or later). It is freely distributable; if not present in the + system, it can be downloaded from Microsoft or from other + software provider for free. + + The fact that MSVCRT.DLL does not exist on a virgin Windows 95 + is not so problematic. Windows 95 is scarcely found nowadays, + Microsoft ended its support a long time ago, and many recent + applications from various vendors, including Microsoft, do not + even run on it. Furthermore, no serious user should run + Windows 95 without a proper update installed. + + +12. Why are you not linking ZLIB1.DLL to + <> ? + + - We considered and abandoned the following alternatives: + + * Linking ZLIB1.DLL to a static C library (LIBC.LIB, or + LIBCMT.LIB) is not a good option. People are using the DLL + mainly to save disk space. If you are linking your program + to a static C library, you may as well consider linking zlib + in statically, too. + + * Linking ZLIB1.DLL to CRTDLL.DLL looks appealing, because + CRTDLL.DLL is present on every Win32 installation. + Unfortunately, it has a series of problems: it does not + work properly with Microsoft's C++ libraries, it does not + provide support for 64-bit file offsets, (and so on...), + and Microsoft discontinued its support a long time ago. + + * Linking ZLIB1.DLL to MSVCR70.DLL or MSVCR71.DLL, supplied + with the Microsoft .NET platform, and Visual C++ 7.0/7.1, + raises problems related to the status of ZLIB1.DLL as a + system component. According to the Microsoft Knowledge Base + article KB326922 "INFO: Redistribution of the Shared C + Runtime Component in Visual C++ .NET", MSVCR70.DLL and + MSVCR71.DLL are not supposed to function as system DLLs, + because they may clash with MSVCRT.DLL. Instead, the + application's installer is supposed to put these DLLs + (if needed) in the application's private directory. + If ZLIB1.DLL depends on a non-system runtime, it cannot + function as a redistributable system component. + + * Linking ZLIB1.DLL to non-Microsoft runtimes, such as + Borland's, or Cygwin's, raises problems related to the + reliable presence of these runtimes on Win32 systems. + It's easier to let the DLL build of zlib up to the people + who distribute these runtimes, and who may proceed as + explained in the answer to Question 14. + + +13. If ZLIB1.DLL cannot be linked to MSVCR70.DLL or MSVCR71.DLL, + how can I build/use ZLIB1.DLL in Microsoft Visual C++ 7.0 + (Visual Studio .NET) or newer? + + - Due to the problems explained in the Microsoft Knowledge Base + article KB326922 (see the previous answer), the C runtime that + comes with the VC7 environment is no longer considered a + system component. That is, it should not be assumed that this + runtime exists, or may be installed in a system directory. + Since ZLIB1.DLL is supposed to be a system component, it may + not depend on a non-system component. + + In order to link ZLIB1.DLL and your application to MSVCRT.DLL + in VC7, you need the library of Visual C++ 6.0 or older. If + you don't have this library at hand, it's probably best not to + use ZLIB1.DLL. + + We are hoping that, in the future, Microsoft will provide a + way to build applications linked to a proper system runtime, + from the Visual C++ environment. Until then, you have a + couple of alternatives, such as linking zlib in statically. + If your application requires dynamic linking, you may proceed + as explained in the answer to Question 14. + + +14. I need to link my own DLL build to a CRT different than + MSVCRT.DLL. What can I do? + + - Feel free to rebuild the DLL from the zlib sources, and link + it the way you want. You should, however, clearly state that + your build is unofficial. You should give it a different file + name, and/or install it in a private directory that can be + accessed by your application only, and is not visible to the + others (i.e. it's neither in the PATH, nor in the SYSTEM or + SYSTEM32 directories). Otherwise, your build may clash with + applications that link to the official build. + + For example, in Cygwin, zlib is linked to the Cygwin runtime + CYGWIN1.DLL, and it is distributed under the name CYGZ.DLL. + + +15. May I include additional pieces of code that I find useful, + link them in ZLIB1.DLL, and export them? + + - No. A legitimate build of ZLIB1.DLL must not include code + that does not originate from the official zlib source code. + But you can make your own private DLL build, under a different + file name, as suggested in the previous answer. + + For example, zlib is a part of the VCL library, distributed + with Borland Delphi and C++ Builder. The DLL build of VCL + is a redistributable file, named VCLxx.DLL. + + +16. May I remove some functionality out of ZLIB1.DLL, by enabling + macros like NO_GZCOMPRESS or NO_GZIP at compile time? + + - No. A legitimate build of ZLIB1.DLL must provide the complete + zlib functionality, as implemented in the official zlib source + code. But you can make your own private DLL build, under a + different file name, as suggested in the previous answer. + + +17. I made my own ZLIB1.DLL build. Can I test it for compliance? + + - We prefer that you download the official DLL from the zlib + web site. If you need something peculiar from this DLL, you + can send your suggestion to the zlib mailing list. + + However, in case you do rebuild the DLL yourself, you can run + it with the test programs found in the DLL distribution. + Running these test programs is not a guarantee of compliance, + but a failure can imply a detected problem. + +** + +This document is written and maintained by +Cosmin Truta diff --git a/software/scsi2sd-util/zlib-1.2.8/win32/Makefile.bor b/software/scsi2sd-util/zlib-1.2.8/win32/Makefile.bor new file mode 100644 index 0000000..d152bbb --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/win32/Makefile.bor @@ -0,0 +1,110 @@ +# Makefile for zlib +# Borland C++ for Win32 +# +# Usage: +# make -f win32/Makefile.bor +# make -f win32/Makefile.bor LOCAL_ZLIB=-DASMV OBJA=match.obj OBJPA=+match.obj + +# ------------ Borland C++ ------------ + +# Optional nonstandard preprocessor flags (e.g. -DMAX_MEM_LEVEL=7) +# should be added to the environment via "set LOCAL_ZLIB=-DFOO" or +# added to the declaration of LOC here: +LOC = $(LOCAL_ZLIB) + +CC = bcc32 +AS = bcc32 +LD = bcc32 +AR = tlib +CFLAGS = -a -d -k- -O2 $(LOC) +ASFLAGS = $(LOC) +LDFLAGS = $(LOC) + + +# variables +ZLIB_LIB = zlib.lib + +OBJ1 = adler32.obj compress.obj crc32.obj deflate.obj gzclose.obj gzlib.obj gzread.obj +OBJ2 = gzwrite.obj infback.obj inffast.obj inflate.obj inftrees.obj trees.obj uncompr.obj zutil.obj +#OBJA = +OBJP1 = +adler32.obj+compress.obj+crc32.obj+deflate.obj+gzclose.obj+gzlib.obj+gzread.obj +OBJP2 = +gzwrite.obj+infback.obj+inffast.obj+inflate.obj+inftrees.obj+trees.obj+uncompr.obj+zutil.obj +#OBJPA= + + +# targets +all: $(ZLIB_LIB) example.exe minigzip.exe + +.c.obj: + $(CC) -c $(CFLAGS) $< + +.asm.obj: + $(AS) -c $(ASFLAGS) $< + +adler32.obj: adler32.c zlib.h zconf.h + +compress.obj: compress.c zlib.h zconf.h + +crc32.obj: crc32.c zlib.h zconf.h crc32.h + +deflate.obj: deflate.c deflate.h zutil.h zlib.h zconf.h + +gzclose.obj: gzclose.c zlib.h zconf.h gzguts.h + +gzlib.obj: gzlib.c zlib.h zconf.h gzguts.h + +gzread.obj: gzread.c zlib.h zconf.h gzguts.h + +gzwrite.obj: gzwrite.c zlib.h zconf.h gzguts.h + +infback.obj: infback.c zutil.h zlib.h zconf.h inftrees.h inflate.h \ + inffast.h inffixed.h + +inffast.obj: inffast.c zutil.h zlib.h zconf.h inftrees.h inflate.h \ + inffast.h + +inflate.obj: inflate.c zutil.h zlib.h zconf.h inftrees.h inflate.h \ + inffast.h inffixed.h + +inftrees.obj: inftrees.c zutil.h zlib.h zconf.h inftrees.h + +trees.obj: trees.c zutil.h zlib.h zconf.h deflate.h trees.h + +uncompr.obj: uncompr.c zlib.h zconf.h + +zutil.obj: zutil.c zutil.h zlib.h zconf.h + +example.obj: test/example.c zlib.h zconf.h + +minigzip.obj: test/minigzip.c zlib.h zconf.h + + +# For the sake of the old Borland make, +# the command line is cut to fit in the MS-DOS 128 byte limit: +$(ZLIB_LIB): $(OBJ1) $(OBJ2) $(OBJA) + -del $(ZLIB_LIB) + $(AR) $(ZLIB_LIB) $(OBJP1) + $(AR) $(ZLIB_LIB) $(OBJP2) + $(AR) $(ZLIB_LIB) $(OBJPA) + + +# testing +test: example.exe minigzip.exe + example + echo hello world | minigzip | minigzip -d + +example.exe: example.obj $(ZLIB_LIB) + $(LD) $(LDFLAGS) example.obj $(ZLIB_LIB) + +minigzip.exe: minigzip.obj $(ZLIB_LIB) + $(LD) $(LDFLAGS) minigzip.obj $(ZLIB_LIB) + + +# cleanup +clean: + -del $(ZLIB_LIB) + -del *.obj + -del *.exe + -del *.tds + -del zlib.bak + -del foo.gz diff --git a/software/scsi2sd-util/zlib-1.2.8/win32/Makefile.gcc b/software/scsi2sd-util/zlib-1.2.8/win32/Makefile.gcc new file mode 100644 index 0000000..6d1ded6 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/win32/Makefile.gcc @@ -0,0 +1,182 @@ +# Makefile for zlib, derived from Makefile.dj2. +# Modified for mingw32 by C. Spieler, 6/16/98. +# Updated for zlib 1.2.x by Christian Spieler and Cosmin Truta, Mar-2003. +# Last updated: Mar 2012. +# Tested under Cygwin and MinGW. + +# Copyright (C) 1995-2003 Jean-loup Gailly. +# For conditions of distribution and use, see copyright notice in zlib.h + +# To compile, or to compile and test, type from the top level zlib directory: +# +# make -fwin32/Makefile.gcc; make test testdll -fwin32/Makefile.gcc +# +# To use the asm code, type: +# cp contrib/asm?86/match.S ./match.S +# make LOC=-DASMV OBJA=match.o -fwin32/Makefile.gcc +# +# To install libz.a, zconf.h and zlib.h in the system directories, type: +# +# make install -fwin32/Makefile.gcc +# +# BINARY_PATH, INCLUDE_PATH and LIBRARY_PATH must be set. +# +# To install the shared lib, append SHARED_MODE=1 to the make command : +# +# make install -fwin32/Makefile.gcc SHARED_MODE=1 + +# Note: +# If the platform is *not* MinGW (e.g. it is Cygwin or UWIN), +# the DLL name should be changed from "zlib1.dll". + +STATICLIB = libz.a +SHAREDLIB = zlib1.dll +IMPLIB = libz.dll.a + +# +# Set to 1 if shared object needs to be installed +# +SHARED_MODE=0 + +#LOC = -DASMV +#LOC = -DDEBUG -g + +PREFIX = +CC = $(PREFIX)gcc +CFLAGS = $(LOC) -O3 -Wall + +AS = $(CC) +ASFLAGS = $(LOC) -Wall + +LD = $(CC) +LDFLAGS = $(LOC) + +AR = $(PREFIX)ar +ARFLAGS = rcs + +RC = $(PREFIX)windres +RCFLAGS = --define GCC_WINDRES + +STRIP = $(PREFIX)strip + +CP = cp -fp +# If GNU install is available, replace $(CP) with install. +INSTALL = $(CP) +RM = rm -f + +prefix ?= /usr/local +exec_prefix = $(prefix) + +OBJS = adler32.o compress.o crc32.o deflate.o gzclose.o gzlib.o gzread.o \ + gzwrite.o infback.o inffast.o inflate.o inftrees.o trees.o uncompr.o zutil.o +OBJA = + +all: $(STATICLIB) $(SHAREDLIB) $(IMPLIB) example.exe minigzip.exe example_d.exe minigzip_d.exe + +test: example.exe minigzip.exe + ./example + echo hello world | ./minigzip | ./minigzip -d + +testdll: example_d.exe minigzip_d.exe + ./example_d + echo hello world | ./minigzip_d | ./minigzip_d -d + +.c.o: + $(CC) $(CFLAGS) -c -o $@ $< + +.S.o: + $(AS) $(ASFLAGS) -c -o $@ $< + +$(STATICLIB): $(OBJS) $(OBJA) + $(AR) $(ARFLAGS) $@ $(OBJS) $(OBJA) + +$(IMPLIB): $(SHAREDLIB) + +$(SHAREDLIB): win32/zlib.def $(OBJS) $(OBJA) zlibrc.o + $(CC) -shared -Wl,--out-implib,$(IMPLIB) $(LDFLAGS) \ + -o $@ win32/zlib.def $(OBJS) $(OBJA) zlibrc.o + $(STRIP) $@ + +example.exe: example.o $(STATICLIB) + $(LD) $(LDFLAGS) -o $@ example.o $(STATICLIB) + $(STRIP) $@ + +minigzip.exe: minigzip.o $(STATICLIB) + $(LD) $(LDFLAGS) -o $@ minigzip.o $(STATICLIB) + $(STRIP) $@ + +example_d.exe: example.o $(IMPLIB) + $(LD) $(LDFLAGS) -o $@ example.o $(IMPLIB) + $(STRIP) $@ + +minigzip_d.exe: minigzip.o $(IMPLIB) + $(LD) $(LDFLAGS) -o $@ minigzip.o $(IMPLIB) + $(STRIP) $@ + +example.o: test/example.c zlib.h zconf.h + $(CC) $(CFLAGS) -I. -c -o $@ test/example.c + +minigzip.o: test/minigzip.c zlib.h zconf.h + $(CC) $(CFLAGS) -I. -c -o $@ test/minigzip.c + +zlibrc.o: win32/zlib1.rc + $(RC) $(RCFLAGS) -o $@ win32/zlib1.rc + +.PHONY: install uninstall clean + +install: zlib.h zconf.h $(STATICLIB) $(IMPLIB) + @if test -z "$(DESTDIR)$(INCLUDE_PATH)" -o -z "$(DESTDIR)$(LIBRARY_PATH)" -o -z "$(DESTDIR)$(BINARY_PATH)"; then \ + echo INCLUDE_PATH, LIBRARY_PATH, and BINARY_PATH must be specified; \ + exit 1; \ + fi + -@mkdir -p '$(DESTDIR)$(INCLUDE_PATH)' + -@mkdir -p '$(DESTDIR)$(LIBRARY_PATH)' '$(DESTDIR)$(LIBRARY_PATH)'/pkgconfig + -if [ "$(SHARED_MODE)" = "1" ]; then \ + mkdir -p '$(DESTDIR)$(BINARY_PATH)'; \ + $(INSTALL) $(SHAREDLIB) '$(DESTDIR)$(BINARY_PATH)'; \ + $(INSTALL) $(IMPLIB) '$(DESTDIR)$(LIBRARY_PATH)'; \ + fi + -$(INSTALL) zlib.h '$(DESTDIR)$(INCLUDE_PATH)' + -$(INSTALL) zconf.h '$(DESTDIR)$(INCLUDE_PATH)' + -$(INSTALL) $(STATICLIB) '$(DESTDIR)$(LIBRARY_PATH)' + sed \ + -e 's|@prefix@|${prefix}|g' \ + -e 's|@exec_prefix@|${exec_prefix}|g' \ + -e 's|@libdir@|$(LIBRARY_PATH)|g' \ + -e 's|@sharedlibdir@|$(LIBRARY_PATH)|g' \ + -e 's|@includedir@|$(INCLUDE_PATH)|g' \ + -e 's|@VERSION@|'`sed -n -e '/VERSION "/s/.*"\(.*\)".*/\1/p' zlib.h`'|g' \ + zlib.pc.in > '$(DESTDIR)$(LIBRARY_PATH)'/pkgconfig/zlib.pc + +uninstall: + -if [ "$(SHARED_MODE)" = "1" ]; then \ + $(RM) '$(DESTDIR)$(BINARY_PATH)'/$(SHAREDLIB); \ + $(RM) '$(DESTDIR)$(LIBRARY_PATH)'/$(IMPLIB); \ + fi + -$(RM) '$(DESTDIR)$(INCLUDE_PATH)'/zlib.h + -$(RM) '$(DESTDIR)$(INCLUDE_PATH)'/zconf.h + -$(RM) '$(DESTDIR)$(LIBRARY_PATH)'/$(STATICLIB) + +clean: + -$(RM) $(STATICLIB) + -$(RM) $(SHAREDLIB) + -$(RM) $(IMPLIB) + -$(RM) *.o + -$(RM) *.exe + -$(RM) foo.gz + +adler32.o: zlib.h zconf.h +compress.o: zlib.h zconf.h +crc32.o: crc32.h zlib.h zconf.h +deflate.o: deflate.h zutil.h zlib.h zconf.h +gzclose.o: zlib.h zconf.h gzguts.h +gzlib.o: zlib.h zconf.h gzguts.h +gzread.o: zlib.h zconf.h gzguts.h +gzwrite.o: zlib.h zconf.h gzguts.h +inffast.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h +inflate.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h +infback.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h +inftrees.o: zutil.h zlib.h zconf.h inftrees.h +trees.o: deflate.h zutil.h zlib.h zconf.h trees.h +uncompr.o: zlib.h zconf.h +zutil.o: zutil.h zlib.h zconf.h diff --git a/software/scsi2sd-util/zlib-1.2.8/win32/Makefile.msc b/software/scsi2sd-util/zlib-1.2.8/win32/Makefile.msc new file mode 100644 index 0000000..67b7731 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/win32/Makefile.msc @@ -0,0 +1,163 @@ +# Makefile for zlib using Microsoft (Visual) C +# zlib is copyright (C) 1995-2006 Jean-loup Gailly and Mark Adler +# +# Usage: +# nmake -f win32/Makefile.msc (standard build) +# nmake -f win32/Makefile.msc LOC=-DFOO (nonstandard build) +# nmake -f win32/Makefile.msc LOC="-DASMV -DASMINF" \ +# OBJA="inffas32.obj match686.obj" (use ASM code, x86) +# nmake -f win32/Makefile.msc AS=ml64 LOC="-DASMV -DASMINF -I." \ +# OBJA="inffasx64.obj gvmat64.obj inffas8664.obj" (use ASM code, x64) + +# The toplevel directory of the source tree. +# +TOP = . + +# optional build flags +LOC = + +# variables +STATICLIB = zlib.lib +SHAREDLIB = zlib1.dll +IMPLIB = zdll.lib + +CC = cl +AS = ml +LD = link +AR = lib +RC = rc +CFLAGS = -nologo -MD -W3 -O2 -Oy- -Zi -Fd"zlib" $(LOC) +WFLAGS = -D_CRT_SECURE_NO_DEPRECATE -D_CRT_NONSTDC_NO_DEPRECATE +ASFLAGS = -coff -Zi $(LOC) +LDFLAGS = -nologo -debug -incremental:no -opt:ref +ARFLAGS = -nologo +RCFLAGS = /dWIN32 /r + +OBJS = adler32.obj compress.obj crc32.obj deflate.obj gzclose.obj gzlib.obj gzread.obj \ + gzwrite.obj infback.obj inflate.obj inftrees.obj inffast.obj trees.obj uncompr.obj zutil.obj +OBJA = + + +# targets +all: $(STATICLIB) $(SHAREDLIB) $(IMPLIB) \ + example.exe minigzip.exe example_d.exe minigzip_d.exe + +$(STATICLIB): $(OBJS) $(OBJA) + $(AR) $(ARFLAGS) -out:$@ $(OBJS) $(OBJA) + +$(IMPLIB): $(SHAREDLIB) + +$(SHAREDLIB): $(TOP)/win32/zlib.def $(OBJS) $(OBJA) zlib1.res + $(LD) $(LDFLAGS) -def:$(TOP)/win32/zlib.def -dll -implib:$(IMPLIB) \ + -out:$@ -base:0x5A4C0000 $(OBJS) $(OBJA) zlib1.res + if exist $@.manifest \ + mt -nologo -manifest $@.manifest -outputresource:$@;2 + +example.exe: example.obj $(STATICLIB) + $(LD) $(LDFLAGS) example.obj $(STATICLIB) + if exist $@.manifest \ + mt -nologo -manifest $@.manifest -outputresource:$@;1 + +minigzip.exe: minigzip.obj $(STATICLIB) + $(LD) $(LDFLAGS) minigzip.obj $(STATICLIB) + if exist $@.manifest \ + mt -nologo -manifest $@.manifest -outputresource:$@;1 + +example_d.exe: example.obj $(IMPLIB) + $(LD) $(LDFLAGS) -out:$@ example.obj $(IMPLIB) + if exist $@.manifest \ + mt -nologo -manifest $@.manifest -outputresource:$@;1 + +minigzip_d.exe: minigzip.obj $(IMPLIB) + $(LD) $(LDFLAGS) -out:$@ minigzip.obj $(IMPLIB) + if exist $@.manifest \ + mt -nologo -manifest $@.manifest -outputresource:$@;1 + +{$(TOP)}.c.obj: + $(CC) -c $(WFLAGS) $(CFLAGS) $< + +{$(TOP)/test}.c.obj: + $(CC) -c -I$(TOP) $(WFLAGS) $(CFLAGS) $< + +{$(TOP)/contrib/masmx64}.c.obj: + $(CC) -c $(WFLAGS) $(CFLAGS) $< + +{$(TOP)/contrib/masmx64}.asm.obj: + $(AS) -c $(ASFLAGS) $< + +{$(TOP)/contrib/masmx86}.asm.obj: + $(AS) -c $(ASFLAGS) $< + +adler32.obj: $(TOP)/adler32.c $(TOP)/zlib.h $(TOP)/zconf.h + +compress.obj: $(TOP)/compress.c $(TOP)/zlib.h $(TOP)/zconf.h + +crc32.obj: $(TOP)/crc32.c $(TOP)/zlib.h $(TOP)/zconf.h $(TOP)/crc32.h + +deflate.obj: $(TOP)/deflate.c $(TOP)/deflate.h $(TOP)/zutil.h $(TOP)/zlib.h $(TOP)/zconf.h + +gzclose.obj: $(TOP)/gzclose.c $(TOP)/zlib.h $(TOP)/zconf.h $(TOP)/gzguts.h + +gzlib.obj: $(TOP)/gzlib.c $(TOP)/zlib.h $(TOP)/zconf.h $(TOP)/gzguts.h + +gzread.obj: $(TOP)/gzread.c $(TOP)/zlib.h $(TOP)/zconf.h $(TOP)/gzguts.h + +gzwrite.obj: $(TOP)/gzwrite.c $(TOP)/zlib.h $(TOP)/zconf.h $(TOP)/gzguts.h + +infback.obj: $(TOP)/infback.c $(TOP)/zutil.h $(TOP)/zlib.h $(TOP)/zconf.h $(TOP)/inftrees.h $(TOP)/inflate.h \ + $(TOP)/inffast.h $(TOP)/inffixed.h + +inffast.obj: $(TOP)/inffast.c $(TOP)/zutil.h $(TOP)/zlib.h $(TOP)/zconf.h $(TOP)/inftrees.h $(TOP)/inflate.h \ + $(TOP)/inffast.h + +inflate.obj: $(TOP)/inflate.c $(TOP)/zutil.h $(TOP)/zlib.h $(TOP)/zconf.h $(TOP)/inftrees.h $(TOP)/inflate.h \ + $(TOP)/inffast.h $(TOP)/inffixed.h + +inftrees.obj: $(TOP)/inftrees.c $(TOP)/zutil.h $(TOP)/zlib.h $(TOP)/zconf.h $(TOP)/inftrees.h + +trees.obj: $(TOP)/trees.c $(TOP)/zutil.h $(TOP)/zlib.h $(TOP)/zconf.h $(TOP)/deflate.h $(TOP)/trees.h + +uncompr.obj: $(TOP)/uncompr.c $(TOP)/zlib.h $(TOP)/zconf.h + +zutil.obj: $(TOP)/zutil.c $(TOP)/zutil.h $(TOP)/zlib.h $(TOP)/zconf.h + +gvmat64.obj: $(TOP)/contrib\masmx64\gvmat64.asm + +inffasx64.obj: $(TOP)/contrib\masmx64\inffasx64.asm + +inffas8664.obj: $(TOP)/contrib\masmx64\inffas8664.c $(TOP)/zutil.h $(TOP)/zlib.h $(TOP)/zconf.h \ + $(TOP)/inftrees.h $(TOP)/inflate.h $(TOP)/inffast.h + +inffas32.obj: $(TOP)/contrib\masmx86\inffas32.asm + +match686.obj: $(TOP)/contrib\masmx86\match686.asm + +example.obj: $(TOP)/test/example.c $(TOP)/zlib.h $(TOP)/zconf.h + +minigzip.obj: $(TOP)/test/minigzip.c $(TOP)/zlib.h $(TOP)/zconf.h + +zlib1.res: $(TOP)/win32/zlib1.rc + $(RC) $(RCFLAGS) /fo$@ $(TOP)/win32/zlib1.rc + +# testing +test: example.exe minigzip.exe + example + echo hello world | minigzip | minigzip -d + +testdll: example_d.exe minigzip_d.exe + example_d + echo hello world | minigzip_d | minigzip_d -d + + +# cleanup +clean: + -del $(STATICLIB) + -del $(SHAREDLIB) + -del $(IMPLIB) + -del *.obj + -del *.res + -del *.exp + -del *.exe + -del *.pdb + -del *.manifest + -del foo.gz diff --git a/software/scsi2sd-util/zlib-1.2.8/win32/README-WIN32.txt b/software/scsi2sd-util/zlib-1.2.8/win32/README-WIN32.txt new file mode 100644 index 0000000..3d77d52 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/win32/README-WIN32.txt @@ -0,0 +1,103 @@ +ZLIB DATA COMPRESSION LIBRARY + +zlib 1.2.8 is a general purpose data compression library. All the code is +thread safe. The data format used by the zlib library is described by RFCs +(Request for Comments) 1950 to 1952 in the files +http://www.ietf.org/rfc/rfc1950.txt (zlib format), rfc1951.txt (deflate format) +and rfc1952.txt (gzip format). + +All functions of the compression library are documented in the file zlib.h +(volunteer to write man pages welcome, contact zlib@gzip.org). Two compiled +examples are distributed in this package, example and minigzip. The example_d +and minigzip_d flavors validate that the zlib1.dll file is working correctly. + +Questions about zlib should be sent to . The zlib home page +is http://zlib.net/ . Before reporting a problem, please check this site to +verify that you have the latest version of zlib; otherwise get the latest +version and check whether the problem still exists or not. + +PLEASE read DLL_FAQ.txt, and the the zlib FAQ http://zlib.net/zlib_faq.html +before asking for help. + + +Manifest: + +The package zlib-1.2.8-win32-x86.zip will contain the following files: + + README-WIN32.txt This document + ChangeLog Changes since previous zlib packages + DLL_FAQ.txt Frequently asked questions about zlib1.dll + zlib.3.pdf Documentation of this library in Adobe Acrobat format + + example.exe A statically-bound example (using zlib.lib, not the dll) + example.pdb Symbolic information for debugging example.exe + + example_d.exe A zlib1.dll bound example (using zdll.lib) + example_d.pdb Symbolic information for debugging example_d.exe + + minigzip.exe A statically-bound test program (using zlib.lib, not the dll) + minigzip.pdb Symbolic information for debugging minigzip.exe + + minigzip_d.exe A zlib1.dll bound test program (using zdll.lib) + minigzip_d.pdb Symbolic information for debugging minigzip_d.exe + + zlib.h Install these files into the compilers' INCLUDE path to + zconf.h compile programs which use zlib.lib or zdll.lib + + zdll.lib Install these files into the compilers' LIB path if linking + zdll.exp a compiled program to the zlib1.dll binary + + zlib.lib Install these files into the compilers' LIB path to link zlib + zlib.pdb into compiled programs, without zlib1.dll runtime dependency + (zlib.pdb provides debugging info to the compile time linker) + + zlib1.dll Install this binary shared library into the system PATH, or + the program's runtime directory (where the .exe resides) + zlib1.pdb Install in the same directory as zlib1.dll, in order to debug + an application crash using WinDbg or similar tools. + +All .pdb files above are entirely optional, but are very useful to a developer +attempting to diagnose program misbehavior or a crash. Many additional +important files for developers can be found in the zlib127.zip source package +available from http://zlib.net/ - review that package's README file for details. + + +Acknowledgments: + +The deflate format used by zlib was defined by Phil Katz. The deflate and +zlib specifications were written by L. Peter Deutsch. Thanks to all the +people who reported problems and suggested various improvements in zlib; they +are too numerous to cite here. + + +Copyright notice: + + (C) 1995-2012 Jean-loup Gailly and Mark Adler + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. + + Jean-loup Gailly Mark Adler + jloup@gzip.org madler@alumni.caltech.edu + +If you use the zlib library in a product, we would appreciate *not* receiving +lengthy legal documents to sign. The sources are provided for free but without +warranty of any kind. The library has been entirely written by Jean-loup +Gailly and Mark Adler; it does not include third-party code. + +If you redistribute modified sources, we would appreciate that you include in +the file ChangeLog history information documenting your changes. Please read +the FAQ for more information on the distribution of modified source versions. diff --git a/software/scsi2sd-util/zlib-1.2.8/win32/VisualC.txt b/software/scsi2sd-util/zlib-1.2.8/win32/VisualC.txt new file mode 100644 index 0000000..579a5fc --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/win32/VisualC.txt @@ -0,0 +1,3 @@ + +To build zlib using the Microsoft Visual C++ environment, +use the appropriate project from the projects/ directory. diff --git a/software/scsi2sd-util/zlib-1.2.8/win32/zlib.def b/software/scsi2sd-util/zlib-1.2.8/win32/zlib.def new file mode 100644 index 0000000..face655 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/win32/zlib.def @@ -0,0 +1,86 @@ +; zlib data compression library +EXPORTS +; basic functions + zlibVersion + deflate + deflateEnd + inflate + inflateEnd +; advanced functions + deflateSetDictionary + deflateCopy + deflateReset + deflateParams + deflateTune + deflateBound + deflatePending + deflatePrime + deflateSetHeader + inflateSetDictionary + inflateGetDictionary + inflateSync + inflateCopy + inflateReset + inflateReset2 + inflatePrime + inflateMark + inflateGetHeader + inflateBack + inflateBackEnd + zlibCompileFlags +; utility functions + compress + compress2 + compressBound + uncompress + gzopen + gzdopen + gzbuffer + gzsetparams + gzread + gzwrite + gzprintf + gzvprintf + gzputs + gzgets + gzputc + gzgetc + gzungetc + gzflush + gzseek + gzrewind + gztell + gzoffset + gzeof + gzdirect + gzclose + gzclose_r + gzclose_w + gzerror + gzclearerr +; large file functions + gzopen64 + gzseek64 + gztell64 + gzoffset64 + adler32_combine64 + crc32_combine64 +; checksum functions + adler32 + crc32 + adler32_combine + crc32_combine +; various hacks, don't look :) + deflateInit_ + deflateInit2_ + inflateInit_ + inflateInit2_ + inflateBackInit_ + gzgetc_ + zError + inflateSyncPoint + get_crc_table + inflateUndermine + inflateResetKeep + deflateResetKeep + gzopen_w diff --git a/software/scsi2sd-util/zlib-1.2.8/win32/zlib1.rc b/software/scsi2sd-util/zlib-1.2.8/win32/zlib1.rc new file mode 100644 index 0000000..5c0feed --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/win32/zlib1.rc @@ -0,0 +1,40 @@ +#include +#include "../zlib.h" + +#ifdef GCC_WINDRES +VS_VERSION_INFO VERSIONINFO +#else +VS_VERSION_INFO VERSIONINFO MOVEABLE IMPURE LOADONCALL DISCARDABLE +#endif + FILEVERSION ZLIB_VER_MAJOR,ZLIB_VER_MINOR,ZLIB_VER_REVISION,0 + PRODUCTVERSION ZLIB_VER_MAJOR,ZLIB_VER_MINOR,ZLIB_VER_REVISION,0 + FILEFLAGSMASK VS_FFI_FILEFLAGSMASK +#ifdef _DEBUG + FILEFLAGS 1 +#else + FILEFLAGS 0 +#endif + FILEOS VOS__WINDOWS32 + FILETYPE VFT_DLL + FILESUBTYPE 0 // not used +BEGIN + BLOCK "StringFileInfo" + BEGIN + BLOCK "040904E4" + //language ID = U.S. English, char set = Windows, Multilingual + BEGIN + VALUE "FileDescription", "zlib data compression library\0" + VALUE "FileVersion", ZLIB_VERSION "\0" + VALUE "InternalName", "zlib1.dll\0" + VALUE "LegalCopyright", "(C) 1995-2013 Jean-loup Gailly & Mark Adler\0" + VALUE "OriginalFilename", "zlib1.dll\0" + VALUE "ProductName", "zlib\0" + VALUE "ProductVersion", ZLIB_VERSION "\0" + VALUE "Comments", "For more information visit http://www.zlib.net/\0" + END + END + BLOCK "VarFileInfo" + BEGIN + VALUE "Translation", 0x0409, 1252 + END +END diff --git a/software/scsi2sd-util/zlib-1.2.8/zconf.h b/software/scsi2sd-util/zlib-1.2.8/zconf.h new file mode 100644 index 0000000..9987a77 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/zconf.h @@ -0,0 +1,511 @@ +/* zconf.h -- configuration of the zlib compression library + * Copyright (C) 1995-2013 Jean-loup Gailly. + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* @(#) $Id$ */ + +#ifndef ZCONF_H +#define ZCONF_H + +/* + * If you *really* need a unique prefix for all types and library functions, + * compile with -DZ_PREFIX. The "standard" zlib should be compiled without it. + * Even better than compiling with -DZ_PREFIX would be to use configure to set + * this permanently in zconf.h using "./configure --zprefix". + */ +#ifdef Z_PREFIX /* may be set to #if 1 by ./configure */ +# define Z_PREFIX_SET + +/* all linked symbols */ +# define _dist_code z__dist_code +# define _length_code z__length_code +# define _tr_align z__tr_align +# define _tr_flush_bits z__tr_flush_bits +# define _tr_flush_block z__tr_flush_block +# define _tr_init z__tr_init +# define _tr_stored_block z__tr_stored_block +# define _tr_tally z__tr_tally +# define adler32 z_adler32 +# define adler32_combine z_adler32_combine +# define adler32_combine64 z_adler32_combine64 +# ifndef Z_SOLO +# define compress z_compress +# define compress2 z_compress2 +# define compressBound z_compressBound +# endif +# define crc32 z_crc32 +# define crc32_combine z_crc32_combine +# define crc32_combine64 z_crc32_combine64 +# define deflate z_deflate +# define deflateBound z_deflateBound +# define deflateCopy z_deflateCopy +# define deflateEnd z_deflateEnd +# define deflateInit2_ z_deflateInit2_ +# define deflateInit_ z_deflateInit_ +# define deflateParams z_deflateParams +# define deflatePending z_deflatePending +# define deflatePrime z_deflatePrime +# define deflateReset z_deflateReset +# define deflateResetKeep z_deflateResetKeep +# define deflateSetDictionary z_deflateSetDictionary +# define deflateSetHeader z_deflateSetHeader +# define deflateTune z_deflateTune +# define deflate_copyright z_deflate_copyright +# define get_crc_table z_get_crc_table +# ifndef Z_SOLO +# define gz_error z_gz_error +# define gz_intmax z_gz_intmax +# define gz_strwinerror z_gz_strwinerror +# define gzbuffer z_gzbuffer +# define gzclearerr z_gzclearerr +# define gzclose z_gzclose +# define gzclose_r z_gzclose_r +# define gzclose_w z_gzclose_w +# define gzdirect z_gzdirect +# define gzdopen z_gzdopen +# define gzeof z_gzeof +# define gzerror z_gzerror +# define gzflush z_gzflush +# define gzgetc z_gzgetc +# define gzgetc_ z_gzgetc_ +# define gzgets z_gzgets +# define gzoffset z_gzoffset +# define gzoffset64 z_gzoffset64 +# define gzopen z_gzopen +# define gzopen64 z_gzopen64 +# ifdef _WIN32 +# define gzopen_w z_gzopen_w +# endif +# define gzprintf z_gzprintf +# define gzvprintf z_gzvprintf +# define gzputc z_gzputc +# define gzputs z_gzputs +# define gzread z_gzread +# define gzrewind z_gzrewind +# define gzseek z_gzseek +# define gzseek64 z_gzseek64 +# define gzsetparams z_gzsetparams +# define gztell z_gztell +# define gztell64 z_gztell64 +# define gzungetc z_gzungetc +# define gzwrite z_gzwrite +# endif +# define inflate z_inflate +# define inflateBack z_inflateBack +# define inflateBackEnd z_inflateBackEnd +# define inflateBackInit_ z_inflateBackInit_ +# define inflateCopy z_inflateCopy +# define inflateEnd z_inflateEnd +# define inflateGetHeader z_inflateGetHeader +# define inflateInit2_ z_inflateInit2_ +# define inflateInit_ z_inflateInit_ +# define inflateMark z_inflateMark +# define inflatePrime z_inflatePrime +# define inflateReset z_inflateReset +# define inflateReset2 z_inflateReset2 +# define inflateSetDictionary z_inflateSetDictionary +# define inflateGetDictionary z_inflateGetDictionary +# define inflateSync z_inflateSync +# define inflateSyncPoint z_inflateSyncPoint +# define inflateUndermine z_inflateUndermine +# define inflateResetKeep z_inflateResetKeep +# define inflate_copyright z_inflate_copyright +# define inflate_fast z_inflate_fast +# define inflate_table z_inflate_table +# ifndef Z_SOLO +# define uncompress z_uncompress +# endif +# define zError z_zError +# ifndef Z_SOLO +# define zcalloc z_zcalloc +# define zcfree z_zcfree +# endif +# define zlibCompileFlags z_zlibCompileFlags +# define zlibVersion z_zlibVersion + +/* all zlib typedefs in zlib.h and zconf.h */ +# define Byte z_Byte +# define Bytef z_Bytef +# define alloc_func z_alloc_func +# define charf z_charf +# define free_func z_free_func +# ifndef Z_SOLO +# define gzFile z_gzFile +# endif +# define gz_header z_gz_header +# define gz_headerp z_gz_headerp +# define in_func z_in_func +# define intf z_intf +# define out_func z_out_func +# define uInt z_uInt +# define uIntf z_uIntf +# define uLong z_uLong +# define uLongf z_uLongf +# define voidp z_voidp +# define voidpc z_voidpc +# define voidpf z_voidpf + +/* all zlib structs in zlib.h and zconf.h */ +# define gz_header_s z_gz_header_s +# define internal_state z_internal_state + +#endif + +#if defined(__MSDOS__) && !defined(MSDOS) +# define MSDOS +#endif +#if (defined(OS_2) || defined(__OS2__)) && !defined(OS2) +# define OS2 +#endif +#if defined(_WINDOWS) && !defined(WINDOWS) +# define WINDOWS +#endif +#if defined(_WIN32) || defined(_WIN32_WCE) || defined(__WIN32__) +# ifndef WIN32 +# define WIN32 +# endif +#endif +#if (defined(MSDOS) || defined(OS2) || defined(WINDOWS)) && !defined(WIN32) +# if !defined(__GNUC__) && !defined(__FLAT__) && !defined(__386__) +# ifndef SYS16BIT +# define SYS16BIT +# endif +# endif +#endif + +/* + * Compile with -DMAXSEG_64K if the alloc function cannot allocate more + * than 64k bytes at a time (needed on systems with 16-bit int). + */ +#ifdef SYS16BIT +# define MAXSEG_64K +#endif +#ifdef MSDOS +# define UNALIGNED_OK +#endif + +#ifdef __STDC_VERSION__ +# ifndef STDC +# define STDC +# endif +# if __STDC_VERSION__ >= 199901L +# ifndef STDC99 +# define STDC99 +# endif +# endif +#endif +#if !defined(STDC) && (defined(__STDC__) || defined(__cplusplus)) +# define STDC +#endif +#if !defined(STDC) && (defined(__GNUC__) || defined(__BORLANDC__)) +# define STDC +#endif +#if !defined(STDC) && (defined(MSDOS) || defined(WINDOWS) || defined(WIN32)) +# define STDC +#endif +#if !defined(STDC) && (defined(OS2) || defined(__HOS_AIX__)) +# define STDC +#endif + +#if defined(__OS400__) && !defined(STDC) /* iSeries (formerly AS/400). */ +# define STDC +#endif + +#ifndef STDC +# ifndef const /* cannot use !defined(STDC) && !defined(const) on Mac */ +# define const /* note: need a more gentle solution here */ +# endif +#endif + +#if defined(ZLIB_CONST) && !defined(z_const) +# define z_const const +#else +# define z_const +#endif + +/* Some Mac compilers merge all .h files incorrectly: */ +#if defined(__MWERKS__)||defined(applec)||defined(THINK_C)||defined(__SC__) +# define NO_DUMMY_DECL +#endif + +/* Maximum value for memLevel in deflateInit2 */ +#ifndef MAX_MEM_LEVEL +# ifdef MAXSEG_64K +# define MAX_MEM_LEVEL 8 +# else +# define MAX_MEM_LEVEL 9 +# endif +#endif + +/* Maximum value for windowBits in deflateInit2 and inflateInit2. + * WARNING: reducing MAX_WBITS makes minigzip unable to extract .gz files + * created by gzip. (Files created by minigzip can still be extracted by + * gzip.) + */ +#ifndef MAX_WBITS +# define MAX_WBITS 15 /* 32K LZ77 window */ +#endif + +/* The memory requirements for deflate are (in bytes): + (1 << (windowBits+2)) + (1 << (memLevel+9)) + that is: 128K for windowBits=15 + 128K for memLevel = 8 (default values) + plus a few kilobytes for small objects. For example, if you want to reduce + the default memory requirements from 256K to 128K, compile with + make CFLAGS="-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7" + Of course this will generally degrade compression (there's no free lunch). + + The memory requirements for inflate are (in bytes) 1 << windowBits + that is, 32K for windowBits=15 (default value) plus a few kilobytes + for small objects. +*/ + + /* Type declarations */ + +#ifndef OF /* function prototypes */ +# ifdef STDC +# define OF(args) args +# else +# define OF(args) () +# endif +#endif + +#ifndef Z_ARG /* function prototypes for stdarg */ +# if defined(STDC) || defined(Z_HAVE_STDARG_H) +# define Z_ARG(args) args +# else +# define Z_ARG(args) () +# endif +#endif + +/* The following definitions for FAR are needed only for MSDOS mixed + * model programming (small or medium model with some far allocations). + * This was tested only with MSC; for other MSDOS compilers you may have + * to define NO_MEMCPY in zutil.h. If you don't need the mixed model, + * just define FAR to be empty. + */ +#ifdef SYS16BIT +# if defined(M_I86SM) || defined(M_I86MM) + /* MSC small or medium model */ +# define SMALL_MEDIUM +# ifdef _MSC_VER +# define FAR _far +# else +# define FAR far +# endif +# endif +# if (defined(__SMALL__) || defined(__MEDIUM__)) + /* Turbo C small or medium model */ +# define SMALL_MEDIUM +# ifdef __BORLANDC__ +# define FAR _far +# else +# define FAR far +# endif +# endif +#endif + +#if defined(WINDOWS) || defined(WIN32) + /* If building or using zlib as a DLL, define ZLIB_DLL. + * This is not mandatory, but it offers a little performance increase. + */ +# ifdef ZLIB_DLL +# if defined(WIN32) && (!defined(__BORLANDC__) || (__BORLANDC__ >= 0x500)) +# ifdef ZLIB_INTERNAL +# define ZEXTERN extern __declspec(dllexport) +# else +# define ZEXTERN extern __declspec(dllimport) +# endif +# endif +# endif /* ZLIB_DLL */ + /* If building or using zlib with the WINAPI/WINAPIV calling convention, + * define ZLIB_WINAPI. + * Caution: the standard ZLIB1.DLL is NOT compiled using ZLIB_WINAPI. + */ +# ifdef ZLIB_WINAPI +# ifdef FAR +# undef FAR +# endif +# include + /* No need for _export, use ZLIB.DEF instead. */ + /* For complete Windows compatibility, use WINAPI, not __stdcall. */ +# define ZEXPORT WINAPI +# ifdef WIN32 +# define ZEXPORTVA WINAPIV +# else +# define ZEXPORTVA FAR CDECL +# endif +# endif +#endif + +#if defined (__BEOS__) +# ifdef ZLIB_DLL +# ifdef ZLIB_INTERNAL +# define ZEXPORT __declspec(dllexport) +# define ZEXPORTVA __declspec(dllexport) +# else +# define ZEXPORT __declspec(dllimport) +# define ZEXPORTVA __declspec(dllimport) +# endif +# endif +#endif + +#ifndef ZEXTERN +# define ZEXTERN extern +#endif +#ifndef ZEXPORT +# define ZEXPORT +#endif +#ifndef ZEXPORTVA +# define ZEXPORTVA +#endif + +#ifndef FAR +# define FAR +#endif + +#if !defined(__MACTYPES__) +typedef unsigned char Byte; /* 8 bits */ +#endif +typedef unsigned int uInt; /* 16 bits or more */ +typedef unsigned long uLong; /* 32 bits or more */ + +#ifdef SMALL_MEDIUM + /* Borland C/C++ and some old MSC versions ignore FAR inside typedef */ +# define Bytef Byte FAR +#else + typedef Byte FAR Bytef; +#endif +typedef char FAR charf; +typedef int FAR intf; +typedef uInt FAR uIntf; +typedef uLong FAR uLongf; + +#ifdef STDC + typedef void const *voidpc; + typedef void FAR *voidpf; + typedef void *voidp; +#else + typedef Byte const *voidpc; + typedef Byte FAR *voidpf; + typedef Byte *voidp; +#endif + +#if !defined(Z_U4) && !defined(Z_SOLO) && defined(STDC) +# include +# if (UINT_MAX == 0xffffffffUL) +# define Z_U4 unsigned +# elif (ULONG_MAX == 0xffffffffUL) +# define Z_U4 unsigned long +# elif (USHRT_MAX == 0xffffffffUL) +# define Z_U4 unsigned short +# endif +#endif + +#ifdef Z_U4 + typedef Z_U4 z_crc_t; +#else + typedef unsigned long z_crc_t; +#endif + +#ifdef HAVE_UNISTD_H /* may be set to #if 1 by ./configure */ +# define Z_HAVE_UNISTD_H +#endif + +#ifdef HAVE_STDARG_H /* may be set to #if 1 by ./configure */ +# define Z_HAVE_STDARG_H +#endif + +#ifdef STDC +# ifndef Z_SOLO +# include /* for off_t */ +# endif +#endif + +#if defined(STDC) || defined(Z_HAVE_STDARG_H) +# ifndef Z_SOLO +# include /* for va_list */ +# endif +#endif + +#ifdef _WIN32 +# ifndef Z_SOLO +# include /* for wchar_t */ +# endif +#endif + +/* a little trick to accommodate both "#define _LARGEFILE64_SOURCE" and + * "#define _LARGEFILE64_SOURCE 1" as requesting 64-bit operations, (even + * though the former does not conform to the LFS document), but considering + * both "#undef _LARGEFILE64_SOURCE" and "#define _LARGEFILE64_SOURCE 0" as + * equivalently requesting no 64-bit operations + */ +#if defined(_LARGEFILE64_SOURCE) && -_LARGEFILE64_SOURCE - -1 == 1 +# undef _LARGEFILE64_SOURCE +#endif + +#if defined(__WATCOMC__) && !defined(Z_HAVE_UNISTD_H) +# define Z_HAVE_UNISTD_H +#endif +#ifndef Z_SOLO +# if defined(Z_HAVE_UNISTD_H) || defined(_LARGEFILE64_SOURCE) +# include /* for SEEK_*, off_t, and _LFS64_LARGEFILE */ +# ifdef VMS +# include /* for off_t */ +# endif +# ifndef z_off_t +# define z_off_t off_t +# endif +# endif +#endif + +#if defined(_LFS64_LARGEFILE) && _LFS64_LARGEFILE-0 +# define Z_LFS64 +#endif + +#if defined(_LARGEFILE64_SOURCE) && defined(Z_LFS64) +# define Z_LARGE64 +#endif + +#if defined(_FILE_OFFSET_BITS) && _FILE_OFFSET_BITS-0 == 64 && defined(Z_LFS64) +# define Z_WANT64 +#endif + +#if !defined(SEEK_SET) && !defined(Z_SOLO) +# define SEEK_SET 0 /* Seek from beginning of file. */ +# define SEEK_CUR 1 /* Seek from current position. */ +# define SEEK_END 2 /* Set file pointer to EOF plus "offset" */ +#endif + +#ifndef z_off_t +# define z_off_t long +#endif + +#if !defined(_WIN32) && defined(Z_LARGE64) +# define z_off64_t off64_t +#else +# if defined(_WIN32) && !defined(__GNUC__) && !defined(Z_SOLO) +# define z_off64_t __int64 +# else +# define z_off64_t z_off_t +# endif +#endif + +/* MVS linker does not support external names larger than 8 bytes */ +#if defined(__MVS__) + #pragma map(deflateInit_,"DEIN") + #pragma map(deflateInit2_,"DEIN2") + #pragma map(deflateEnd,"DEEND") + #pragma map(deflateBound,"DEBND") + #pragma map(inflateInit_,"ININ") + #pragma map(inflateInit2_,"ININ2") + #pragma map(inflateEnd,"INEND") + #pragma map(inflateSync,"INSY") + #pragma map(inflateSetDictionary,"INSEDI") + #pragma map(compressBound,"CMBND") + #pragma map(inflate_table,"INTABL") + #pragma map(inflate_fast,"INFA") + #pragma map(inflate_copyright,"INCOPY") +#endif + +#endif /* ZCONF_H */ diff --git a/software/scsi2sd-util/zlib-1.2.8/zconf.h.cmakein b/software/scsi2sd-util/zlib-1.2.8/zconf.h.cmakein new file mode 100644 index 0000000..043019c --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/zconf.h.cmakein @@ -0,0 +1,513 @@ +/* zconf.h -- configuration of the zlib compression library + * Copyright (C) 1995-2013 Jean-loup Gailly. + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* @(#) $Id$ */ + +#ifndef ZCONF_H +#define ZCONF_H +#cmakedefine Z_PREFIX +#cmakedefine Z_HAVE_UNISTD_H + +/* + * If you *really* need a unique prefix for all types and library functions, + * compile with -DZ_PREFIX. The "standard" zlib should be compiled without it. + * Even better than compiling with -DZ_PREFIX would be to use configure to set + * this permanently in zconf.h using "./configure --zprefix". + */ +#ifdef Z_PREFIX /* may be set to #if 1 by ./configure */ +# define Z_PREFIX_SET + +/* all linked symbols */ +# define _dist_code z__dist_code +# define _length_code z__length_code +# define _tr_align z__tr_align +# define _tr_flush_bits z__tr_flush_bits +# define _tr_flush_block z__tr_flush_block +# define _tr_init z__tr_init +# define _tr_stored_block z__tr_stored_block +# define _tr_tally z__tr_tally +# define adler32 z_adler32 +# define adler32_combine z_adler32_combine +# define adler32_combine64 z_adler32_combine64 +# ifndef Z_SOLO +# define compress z_compress +# define compress2 z_compress2 +# define compressBound z_compressBound +# endif +# define crc32 z_crc32 +# define crc32_combine z_crc32_combine +# define crc32_combine64 z_crc32_combine64 +# define deflate z_deflate +# define deflateBound z_deflateBound +# define deflateCopy z_deflateCopy +# define deflateEnd z_deflateEnd +# define deflateInit2_ z_deflateInit2_ +# define deflateInit_ z_deflateInit_ +# define deflateParams z_deflateParams +# define deflatePending z_deflatePending +# define deflatePrime z_deflatePrime +# define deflateReset z_deflateReset +# define deflateResetKeep z_deflateResetKeep +# define deflateSetDictionary z_deflateSetDictionary +# define deflateSetHeader z_deflateSetHeader +# define deflateTune z_deflateTune +# define deflate_copyright z_deflate_copyright +# define get_crc_table z_get_crc_table +# ifndef Z_SOLO +# define gz_error z_gz_error +# define gz_intmax z_gz_intmax +# define gz_strwinerror z_gz_strwinerror +# define gzbuffer z_gzbuffer +# define gzclearerr z_gzclearerr +# define gzclose z_gzclose +# define gzclose_r z_gzclose_r +# define gzclose_w z_gzclose_w +# define gzdirect z_gzdirect +# define gzdopen z_gzdopen +# define gzeof z_gzeof +# define gzerror z_gzerror +# define gzflush z_gzflush +# define gzgetc z_gzgetc +# define gzgetc_ z_gzgetc_ +# define gzgets z_gzgets +# define gzoffset z_gzoffset +# define gzoffset64 z_gzoffset64 +# define gzopen z_gzopen +# define gzopen64 z_gzopen64 +# ifdef _WIN32 +# define gzopen_w z_gzopen_w +# endif +# define gzprintf z_gzprintf +# define gzvprintf z_gzvprintf +# define gzputc z_gzputc +# define gzputs z_gzputs +# define gzread z_gzread +# define gzrewind z_gzrewind +# define gzseek z_gzseek +# define gzseek64 z_gzseek64 +# define gzsetparams z_gzsetparams +# define gztell z_gztell +# define gztell64 z_gztell64 +# define gzungetc z_gzungetc +# define gzwrite z_gzwrite +# endif +# define inflate z_inflate +# define inflateBack z_inflateBack +# define inflateBackEnd z_inflateBackEnd +# define inflateBackInit_ z_inflateBackInit_ +# define inflateCopy z_inflateCopy +# define inflateEnd z_inflateEnd +# define inflateGetHeader z_inflateGetHeader +# define inflateInit2_ z_inflateInit2_ +# define inflateInit_ z_inflateInit_ +# define inflateMark z_inflateMark +# define inflatePrime z_inflatePrime +# define inflateReset z_inflateReset +# define inflateReset2 z_inflateReset2 +# define inflateSetDictionary z_inflateSetDictionary +# define inflateGetDictionary z_inflateGetDictionary +# define inflateSync z_inflateSync +# define inflateSyncPoint z_inflateSyncPoint +# define inflateUndermine z_inflateUndermine +# define inflateResetKeep z_inflateResetKeep +# define inflate_copyright z_inflate_copyright +# define inflate_fast z_inflate_fast +# define inflate_table z_inflate_table +# ifndef Z_SOLO +# define uncompress z_uncompress +# endif +# define zError z_zError +# ifndef Z_SOLO +# define zcalloc z_zcalloc +# define zcfree z_zcfree +# endif +# define zlibCompileFlags z_zlibCompileFlags +# define zlibVersion z_zlibVersion + +/* all zlib typedefs in zlib.h and zconf.h */ +# define Byte z_Byte +# define Bytef z_Bytef +# define alloc_func z_alloc_func +# define charf z_charf +# define free_func z_free_func +# ifndef Z_SOLO +# define gzFile z_gzFile +# endif +# define gz_header z_gz_header +# define gz_headerp z_gz_headerp +# define in_func z_in_func +# define intf z_intf +# define out_func z_out_func +# define uInt z_uInt +# define uIntf z_uIntf +# define uLong z_uLong +# define uLongf z_uLongf +# define voidp z_voidp +# define voidpc z_voidpc +# define voidpf z_voidpf + +/* all zlib structs in zlib.h and zconf.h */ +# define gz_header_s z_gz_header_s +# define internal_state z_internal_state + +#endif + +#if defined(__MSDOS__) && !defined(MSDOS) +# define MSDOS +#endif +#if (defined(OS_2) || defined(__OS2__)) && !defined(OS2) +# define OS2 +#endif +#if defined(_WINDOWS) && !defined(WINDOWS) +# define WINDOWS +#endif +#if defined(_WIN32) || defined(_WIN32_WCE) || defined(__WIN32__) +# ifndef WIN32 +# define WIN32 +# endif +#endif +#if (defined(MSDOS) || defined(OS2) || defined(WINDOWS)) && !defined(WIN32) +# if !defined(__GNUC__) && !defined(__FLAT__) && !defined(__386__) +# ifndef SYS16BIT +# define SYS16BIT +# endif +# endif +#endif + +/* + * Compile with -DMAXSEG_64K if the alloc function cannot allocate more + * than 64k bytes at a time (needed on systems with 16-bit int). + */ +#ifdef SYS16BIT +# define MAXSEG_64K +#endif +#ifdef MSDOS +# define UNALIGNED_OK +#endif + +#ifdef __STDC_VERSION__ +# ifndef STDC +# define STDC +# endif +# if __STDC_VERSION__ >= 199901L +# ifndef STDC99 +# define STDC99 +# endif +# endif +#endif +#if !defined(STDC) && (defined(__STDC__) || defined(__cplusplus)) +# define STDC +#endif +#if !defined(STDC) && (defined(__GNUC__) || defined(__BORLANDC__)) +# define STDC +#endif +#if !defined(STDC) && (defined(MSDOS) || defined(WINDOWS) || defined(WIN32)) +# define STDC +#endif +#if !defined(STDC) && (defined(OS2) || defined(__HOS_AIX__)) +# define STDC +#endif + +#if defined(__OS400__) && !defined(STDC) /* iSeries (formerly AS/400). */ +# define STDC +#endif + +#ifndef STDC +# ifndef const /* cannot use !defined(STDC) && !defined(const) on Mac */ +# define const /* note: need a more gentle solution here */ +# endif +#endif + +#if defined(ZLIB_CONST) && !defined(z_const) +# define z_const const +#else +# define z_const +#endif + +/* Some Mac compilers merge all .h files incorrectly: */ +#if defined(__MWERKS__)||defined(applec)||defined(THINK_C)||defined(__SC__) +# define NO_DUMMY_DECL +#endif + +/* Maximum value for memLevel in deflateInit2 */ +#ifndef MAX_MEM_LEVEL +# ifdef MAXSEG_64K +# define MAX_MEM_LEVEL 8 +# else +# define MAX_MEM_LEVEL 9 +# endif +#endif + +/* Maximum value for windowBits in deflateInit2 and inflateInit2. + * WARNING: reducing MAX_WBITS makes minigzip unable to extract .gz files + * created by gzip. (Files created by minigzip can still be extracted by + * gzip.) + */ +#ifndef MAX_WBITS +# define MAX_WBITS 15 /* 32K LZ77 window */ +#endif + +/* The memory requirements for deflate are (in bytes): + (1 << (windowBits+2)) + (1 << (memLevel+9)) + that is: 128K for windowBits=15 + 128K for memLevel = 8 (default values) + plus a few kilobytes for small objects. For example, if you want to reduce + the default memory requirements from 256K to 128K, compile with + make CFLAGS="-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7" + Of course this will generally degrade compression (there's no free lunch). + + The memory requirements for inflate are (in bytes) 1 << windowBits + that is, 32K for windowBits=15 (default value) plus a few kilobytes + for small objects. +*/ + + /* Type declarations */ + +#ifndef OF /* function prototypes */ +# ifdef STDC +# define OF(args) args +# else +# define OF(args) () +# endif +#endif + +#ifndef Z_ARG /* function prototypes for stdarg */ +# if defined(STDC) || defined(Z_HAVE_STDARG_H) +# define Z_ARG(args) args +# else +# define Z_ARG(args) () +# endif +#endif + +/* The following definitions for FAR are needed only for MSDOS mixed + * model programming (small or medium model with some far allocations). + * This was tested only with MSC; for other MSDOS compilers you may have + * to define NO_MEMCPY in zutil.h. If you don't need the mixed model, + * just define FAR to be empty. + */ +#ifdef SYS16BIT +# if defined(M_I86SM) || defined(M_I86MM) + /* MSC small or medium model */ +# define SMALL_MEDIUM +# ifdef _MSC_VER +# define FAR _far +# else +# define FAR far +# endif +# endif +# if (defined(__SMALL__) || defined(__MEDIUM__)) + /* Turbo C small or medium model */ +# define SMALL_MEDIUM +# ifdef __BORLANDC__ +# define FAR _far +# else +# define FAR far +# endif +# endif +#endif + +#if defined(WINDOWS) || defined(WIN32) + /* If building or using zlib as a DLL, define ZLIB_DLL. + * This is not mandatory, but it offers a little performance increase. + */ +# ifdef ZLIB_DLL +# if defined(WIN32) && (!defined(__BORLANDC__) || (__BORLANDC__ >= 0x500)) +# ifdef ZLIB_INTERNAL +# define ZEXTERN extern __declspec(dllexport) +# else +# define ZEXTERN extern __declspec(dllimport) +# endif +# endif +# endif /* ZLIB_DLL */ + /* If building or using zlib with the WINAPI/WINAPIV calling convention, + * define ZLIB_WINAPI. + * Caution: the standard ZLIB1.DLL is NOT compiled using ZLIB_WINAPI. + */ +# ifdef ZLIB_WINAPI +# ifdef FAR +# undef FAR +# endif +# include + /* No need for _export, use ZLIB.DEF instead. */ + /* For complete Windows compatibility, use WINAPI, not __stdcall. */ +# define ZEXPORT WINAPI +# ifdef WIN32 +# define ZEXPORTVA WINAPIV +# else +# define ZEXPORTVA FAR CDECL +# endif +# endif +#endif + +#if defined (__BEOS__) +# ifdef ZLIB_DLL +# ifdef ZLIB_INTERNAL +# define ZEXPORT __declspec(dllexport) +# define ZEXPORTVA __declspec(dllexport) +# else +# define ZEXPORT __declspec(dllimport) +# define ZEXPORTVA __declspec(dllimport) +# endif +# endif +#endif + +#ifndef ZEXTERN +# define ZEXTERN extern +#endif +#ifndef ZEXPORT +# define ZEXPORT +#endif +#ifndef ZEXPORTVA +# define ZEXPORTVA +#endif + +#ifndef FAR +# define FAR +#endif + +#if !defined(__MACTYPES__) +typedef unsigned char Byte; /* 8 bits */ +#endif +typedef unsigned int uInt; /* 16 bits or more */ +typedef unsigned long uLong; /* 32 bits or more */ + +#ifdef SMALL_MEDIUM + /* Borland C/C++ and some old MSC versions ignore FAR inside typedef */ +# define Bytef Byte FAR +#else + typedef Byte FAR Bytef; +#endif +typedef char FAR charf; +typedef int FAR intf; +typedef uInt FAR uIntf; +typedef uLong FAR uLongf; + +#ifdef STDC + typedef void const *voidpc; + typedef void FAR *voidpf; + typedef void *voidp; +#else + typedef Byte const *voidpc; + typedef Byte FAR *voidpf; + typedef Byte *voidp; +#endif + +#if !defined(Z_U4) && !defined(Z_SOLO) && defined(STDC) +# include +# if (UINT_MAX == 0xffffffffUL) +# define Z_U4 unsigned +# elif (ULONG_MAX == 0xffffffffUL) +# define Z_U4 unsigned long +# elif (USHRT_MAX == 0xffffffffUL) +# define Z_U4 unsigned short +# endif +#endif + +#ifdef Z_U4 + typedef Z_U4 z_crc_t; +#else + typedef unsigned long z_crc_t; +#endif + +#ifdef HAVE_UNISTD_H /* may be set to #if 1 by ./configure */ +# define Z_HAVE_UNISTD_H +#endif + +#ifdef HAVE_STDARG_H /* may be set to #if 1 by ./configure */ +# define Z_HAVE_STDARG_H +#endif + +#ifdef STDC +# ifndef Z_SOLO +# include /* for off_t */ +# endif +#endif + +#if defined(STDC) || defined(Z_HAVE_STDARG_H) +# ifndef Z_SOLO +# include /* for va_list */ +# endif +#endif + +#ifdef _WIN32 +# ifndef Z_SOLO +# include /* for wchar_t */ +# endif +#endif + +/* a little trick to accommodate both "#define _LARGEFILE64_SOURCE" and + * "#define _LARGEFILE64_SOURCE 1" as requesting 64-bit operations, (even + * though the former does not conform to the LFS document), but considering + * both "#undef _LARGEFILE64_SOURCE" and "#define _LARGEFILE64_SOURCE 0" as + * equivalently requesting no 64-bit operations + */ +#if defined(_LARGEFILE64_SOURCE) && -_LARGEFILE64_SOURCE - -1 == 1 +# undef _LARGEFILE64_SOURCE +#endif + +#if defined(__WATCOMC__) && !defined(Z_HAVE_UNISTD_H) +# define Z_HAVE_UNISTD_H +#endif +#ifndef Z_SOLO +# if defined(Z_HAVE_UNISTD_H) || defined(_LARGEFILE64_SOURCE) +# include /* for SEEK_*, off_t, and _LFS64_LARGEFILE */ +# ifdef VMS +# include /* for off_t */ +# endif +# ifndef z_off_t +# define z_off_t off_t +# endif +# endif +#endif + +#if defined(_LFS64_LARGEFILE) && _LFS64_LARGEFILE-0 +# define Z_LFS64 +#endif + +#if defined(_LARGEFILE64_SOURCE) && defined(Z_LFS64) +# define Z_LARGE64 +#endif + +#if defined(_FILE_OFFSET_BITS) && _FILE_OFFSET_BITS-0 == 64 && defined(Z_LFS64) +# define Z_WANT64 +#endif + +#if !defined(SEEK_SET) && !defined(Z_SOLO) +# define SEEK_SET 0 /* Seek from beginning of file. */ +# define SEEK_CUR 1 /* Seek from current position. */ +# define SEEK_END 2 /* Set file pointer to EOF plus "offset" */ +#endif + +#ifndef z_off_t +# define z_off_t long +#endif + +#if !defined(_WIN32) && defined(Z_LARGE64) +# define z_off64_t off64_t +#else +# if defined(_WIN32) && !defined(__GNUC__) && !defined(Z_SOLO) +# define z_off64_t __int64 +# else +# define z_off64_t z_off_t +# endif +#endif + +/* MVS linker does not support external names larger than 8 bytes */ +#if defined(__MVS__) + #pragma map(deflateInit_,"DEIN") + #pragma map(deflateInit2_,"DEIN2") + #pragma map(deflateEnd,"DEEND") + #pragma map(deflateBound,"DEBND") + #pragma map(inflateInit_,"ININ") + #pragma map(inflateInit2_,"ININ2") + #pragma map(inflateEnd,"INEND") + #pragma map(inflateSync,"INSY") + #pragma map(inflateSetDictionary,"INSEDI") + #pragma map(compressBound,"CMBND") + #pragma map(inflate_table,"INTABL") + #pragma map(inflate_fast,"INFA") + #pragma map(inflate_copyright,"INCOPY") +#endif + +#endif /* ZCONF_H */ diff --git a/software/scsi2sd-util/zlib-1.2.8/zconf.h.in b/software/scsi2sd-util/zlib-1.2.8/zconf.h.in new file mode 100644 index 0000000..9987a77 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/zconf.h.in @@ -0,0 +1,511 @@ +/* zconf.h -- configuration of the zlib compression library + * Copyright (C) 1995-2013 Jean-loup Gailly. + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* @(#) $Id$ */ + +#ifndef ZCONF_H +#define ZCONF_H + +/* + * If you *really* need a unique prefix for all types and library functions, + * compile with -DZ_PREFIX. The "standard" zlib should be compiled without it. + * Even better than compiling with -DZ_PREFIX would be to use configure to set + * this permanently in zconf.h using "./configure --zprefix". + */ +#ifdef Z_PREFIX /* may be set to #if 1 by ./configure */ +# define Z_PREFIX_SET + +/* all linked symbols */ +# define _dist_code z__dist_code +# define _length_code z__length_code +# define _tr_align z__tr_align +# define _tr_flush_bits z__tr_flush_bits +# define _tr_flush_block z__tr_flush_block +# define _tr_init z__tr_init +# define _tr_stored_block z__tr_stored_block +# define _tr_tally z__tr_tally +# define adler32 z_adler32 +# define adler32_combine z_adler32_combine +# define adler32_combine64 z_adler32_combine64 +# ifndef Z_SOLO +# define compress z_compress +# define compress2 z_compress2 +# define compressBound z_compressBound +# endif +# define crc32 z_crc32 +# define crc32_combine z_crc32_combine +# define crc32_combine64 z_crc32_combine64 +# define deflate z_deflate +# define deflateBound z_deflateBound +# define deflateCopy z_deflateCopy +# define deflateEnd z_deflateEnd +# define deflateInit2_ z_deflateInit2_ +# define deflateInit_ z_deflateInit_ +# define deflateParams z_deflateParams +# define deflatePending z_deflatePending +# define deflatePrime z_deflatePrime +# define deflateReset z_deflateReset +# define deflateResetKeep z_deflateResetKeep +# define deflateSetDictionary z_deflateSetDictionary +# define deflateSetHeader z_deflateSetHeader +# define deflateTune z_deflateTune +# define deflate_copyright z_deflate_copyright +# define get_crc_table z_get_crc_table +# ifndef Z_SOLO +# define gz_error z_gz_error +# define gz_intmax z_gz_intmax +# define gz_strwinerror z_gz_strwinerror +# define gzbuffer z_gzbuffer +# define gzclearerr z_gzclearerr +# define gzclose z_gzclose +# define gzclose_r z_gzclose_r +# define gzclose_w z_gzclose_w +# define gzdirect z_gzdirect +# define gzdopen z_gzdopen +# define gzeof z_gzeof +# define gzerror z_gzerror +# define gzflush z_gzflush +# define gzgetc z_gzgetc +# define gzgetc_ z_gzgetc_ +# define gzgets z_gzgets +# define gzoffset z_gzoffset +# define gzoffset64 z_gzoffset64 +# define gzopen z_gzopen +# define gzopen64 z_gzopen64 +# ifdef _WIN32 +# define gzopen_w z_gzopen_w +# endif +# define gzprintf z_gzprintf +# define gzvprintf z_gzvprintf +# define gzputc z_gzputc +# define gzputs z_gzputs +# define gzread z_gzread +# define gzrewind z_gzrewind +# define gzseek z_gzseek +# define gzseek64 z_gzseek64 +# define gzsetparams z_gzsetparams +# define gztell z_gztell +# define gztell64 z_gztell64 +# define gzungetc z_gzungetc +# define gzwrite z_gzwrite +# endif +# define inflate z_inflate +# define inflateBack z_inflateBack +# define inflateBackEnd z_inflateBackEnd +# define inflateBackInit_ z_inflateBackInit_ +# define inflateCopy z_inflateCopy +# define inflateEnd z_inflateEnd +# define inflateGetHeader z_inflateGetHeader +# define inflateInit2_ z_inflateInit2_ +# define inflateInit_ z_inflateInit_ +# define inflateMark z_inflateMark +# define inflatePrime z_inflatePrime +# define inflateReset z_inflateReset +# define inflateReset2 z_inflateReset2 +# define inflateSetDictionary z_inflateSetDictionary +# define inflateGetDictionary z_inflateGetDictionary +# define inflateSync z_inflateSync +# define inflateSyncPoint z_inflateSyncPoint +# define inflateUndermine z_inflateUndermine +# define inflateResetKeep z_inflateResetKeep +# define inflate_copyright z_inflate_copyright +# define inflate_fast z_inflate_fast +# define inflate_table z_inflate_table +# ifndef Z_SOLO +# define uncompress z_uncompress +# endif +# define zError z_zError +# ifndef Z_SOLO +# define zcalloc z_zcalloc +# define zcfree z_zcfree +# endif +# define zlibCompileFlags z_zlibCompileFlags +# define zlibVersion z_zlibVersion + +/* all zlib typedefs in zlib.h and zconf.h */ +# define Byte z_Byte +# define Bytef z_Bytef +# define alloc_func z_alloc_func +# define charf z_charf +# define free_func z_free_func +# ifndef Z_SOLO +# define gzFile z_gzFile +# endif +# define gz_header z_gz_header +# define gz_headerp z_gz_headerp +# define in_func z_in_func +# define intf z_intf +# define out_func z_out_func +# define uInt z_uInt +# define uIntf z_uIntf +# define uLong z_uLong +# define uLongf z_uLongf +# define voidp z_voidp +# define voidpc z_voidpc +# define voidpf z_voidpf + +/* all zlib structs in zlib.h and zconf.h */ +# define gz_header_s z_gz_header_s +# define internal_state z_internal_state + +#endif + +#if defined(__MSDOS__) && !defined(MSDOS) +# define MSDOS +#endif +#if (defined(OS_2) || defined(__OS2__)) && !defined(OS2) +# define OS2 +#endif +#if defined(_WINDOWS) && !defined(WINDOWS) +# define WINDOWS +#endif +#if defined(_WIN32) || defined(_WIN32_WCE) || defined(__WIN32__) +# ifndef WIN32 +# define WIN32 +# endif +#endif +#if (defined(MSDOS) || defined(OS2) || defined(WINDOWS)) && !defined(WIN32) +# if !defined(__GNUC__) && !defined(__FLAT__) && !defined(__386__) +# ifndef SYS16BIT +# define SYS16BIT +# endif +# endif +#endif + +/* + * Compile with -DMAXSEG_64K if the alloc function cannot allocate more + * than 64k bytes at a time (needed on systems with 16-bit int). + */ +#ifdef SYS16BIT +# define MAXSEG_64K +#endif +#ifdef MSDOS +# define UNALIGNED_OK +#endif + +#ifdef __STDC_VERSION__ +# ifndef STDC +# define STDC +# endif +# if __STDC_VERSION__ >= 199901L +# ifndef STDC99 +# define STDC99 +# endif +# endif +#endif +#if !defined(STDC) && (defined(__STDC__) || defined(__cplusplus)) +# define STDC +#endif +#if !defined(STDC) && (defined(__GNUC__) || defined(__BORLANDC__)) +# define STDC +#endif +#if !defined(STDC) && (defined(MSDOS) || defined(WINDOWS) || defined(WIN32)) +# define STDC +#endif +#if !defined(STDC) && (defined(OS2) || defined(__HOS_AIX__)) +# define STDC +#endif + +#if defined(__OS400__) && !defined(STDC) /* iSeries (formerly AS/400). */ +# define STDC +#endif + +#ifndef STDC +# ifndef const /* cannot use !defined(STDC) && !defined(const) on Mac */ +# define const /* note: need a more gentle solution here */ +# endif +#endif + +#if defined(ZLIB_CONST) && !defined(z_const) +# define z_const const +#else +# define z_const +#endif + +/* Some Mac compilers merge all .h files incorrectly: */ +#if defined(__MWERKS__)||defined(applec)||defined(THINK_C)||defined(__SC__) +# define NO_DUMMY_DECL +#endif + +/* Maximum value for memLevel in deflateInit2 */ +#ifndef MAX_MEM_LEVEL +# ifdef MAXSEG_64K +# define MAX_MEM_LEVEL 8 +# else +# define MAX_MEM_LEVEL 9 +# endif +#endif + +/* Maximum value for windowBits in deflateInit2 and inflateInit2. + * WARNING: reducing MAX_WBITS makes minigzip unable to extract .gz files + * created by gzip. (Files created by minigzip can still be extracted by + * gzip.) + */ +#ifndef MAX_WBITS +# define MAX_WBITS 15 /* 32K LZ77 window */ +#endif + +/* The memory requirements for deflate are (in bytes): + (1 << (windowBits+2)) + (1 << (memLevel+9)) + that is: 128K for windowBits=15 + 128K for memLevel = 8 (default values) + plus a few kilobytes for small objects. For example, if you want to reduce + the default memory requirements from 256K to 128K, compile with + make CFLAGS="-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7" + Of course this will generally degrade compression (there's no free lunch). + + The memory requirements for inflate are (in bytes) 1 << windowBits + that is, 32K for windowBits=15 (default value) plus a few kilobytes + for small objects. +*/ + + /* Type declarations */ + +#ifndef OF /* function prototypes */ +# ifdef STDC +# define OF(args) args +# else +# define OF(args) () +# endif +#endif + +#ifndef Z_ARG /* function prototypes for stdarg */ +# if defined(STDC) || defined(Z_HAVE_STDARG_H) +# define Z_ARG(args) args +# else +# define Z_ARG(args) () +# endif +#endif + +/* The following definitions for FAR are needed only for MSDOS mixed + * model programming (small or medium model with some far allocations). + * This was tested only with MSC; for other MSDOS compilers you may have + * to define NO_MEMCPY in zutil.h. If you don't need the mixed model, + * just define FAR to be empty. + */ +#ifdef SYS16BIT +# if defined(M_I86SM) || defined(M_I86MM) + /* MSC small or medium model */ +# define SMALL_MEDIUM +# ifdef _MSC_VER +# define FAR _far +# else +# define FAR far +# endif +# endif +# if (defined(__SMALL__) || defined(__MEDIUM__)) + /* Turbo C small or medium model */ +# define SMALL_MEDIUM +# ifdef __BORLANDC__ +# define FAR _far +# else +# define FAR far +# endif +# endif +#endif + +#if defined(WINDOWS) || defined(WIN32) + /* If building or using zlib as a DLL, define ZLIB_DLL. + * This is not mandatory, but it offers a little performance increase. + */ +# ifdef ZLIB_DLL +# if defined(WIN32) && (!defined(__BORLANDC__) || (__BORLANDC__ >= 0x500)) +# ifdef ZLIB_INTERNAL +# define ZEXTERN extern __declspec(dllexport) +# else +# define ZEXTERN extern __declspec(dllimport) +# endif +# endif +# endif /* ZLIB_DLL */ + /* If building or using zlib with the WINAPI/WINAPIV calling convention, + * define ZLIB_WINAPI. + * Caution: the standard ZLIB1.DLL is NOT compiled using ZLIB_WINAPI. + */ +# ifdef ZLIB_WINAPI +# ifdef FAR +# undef FAR +# endif +# include + /* No need for _export, use ZLIB.DEF instead. */ + /* For complete Windows compatibility, use WINAPI, not __stdcall. */ +# define ZEXPORT WINAPI +# ifdef WIN32 +# define ZEXPORTVA WINAPIV +# else +# define ZEXPORTVA FAR CDECL +# endif +# endif +#endif + +#if defined (__BEOS__) +# ifdef ZLIB_DLL +# ifdef ZLIB_INTERNAL +# define ZEXPORT __declspec(dllexport) +# define ZEXPORTVA __declspec(dllexport) +# else +# define ZEXPORT __declspec(dllimport) +# define ZEXPORTVA __declspec(dllimport) +# endif +# endif +#endif + +#ifndef ZEXTERN +# define ZEXTERN extern +#endif +#ifndef ZEXPORT +# define ZEXPORT +#endif +#ifndef ZEXPORTVA +# define ZEXPORTVA +#endif + +#ifndef FAR +# define FAR +#endif + +#if !defined(__MACTYPES__) +typedef unsigned char Byte; /* 8 bits */ +#endif +typedef unsigned int uInt; /* 16 bits or more */ +typedef unsigned long uLong; /* 32 bits or more */ + +#ifdef SMALL_MEDIUM + /* Borland C/C++ and some old MSC versions ignore FAR inside typedef */ +# define Bytef Byte FAR +#else + typedef Byte FAR Bytef; +#endif +typedef char FAR charf; +typedef int FAR intf; +typedef uInt FAR uIntf; +typedef uLong FAR uLongf; + +#ifdef STDC + typedef void const *voidpc; + typedef void FAR *voidpf; + typedef void *voidp; +#else + typedef Byte const *voidpc; + typedef Byte FAR *voidpf; + typedef Byte *voidp; +#endif + +#if !defined(Z_U4) && !defined(Z_SOLO) && defined(STDC) +# include +# if (UINT_MAX == 0xffffffffUL) +# define Z_U4 unsigned +# elif (ULONG_MAX == 0xffffffffUL) +# define Z_U4 unsigned long +# elif (USHRT_MAX == 0xffffffffUL) +# define Z_U4 unsigned short +# endif +#endif + +#ifdef Z_U4 + typedef Z_U4 z_crc_t; +#else + typedef unsigned long z_crc_t; +#endif + +#ifdef HAVE_UNISTD_H /* may be set to #if 1 by ./configure */ +# define Z_HAVE_UNISTD_H +#endif + +#ifdef HAVE_STDARG_H /* may be set to #if 1 by ./configure */ +# define Z_HAVE_STDARG_H +#endif + +#ifdef STDC +# ifndef Z_SOLO +# include /* for off_t */ +# endif +#endif + +#if defined(STDC) || defined(Z_HAVE_STDARG_H) +# ifndef Z_SOLO +# include /* for va_list */ +# endif +#endif + +#ifdef _WIN32 +# ifndef Z_SOLO +# include /* for wchar_t */ +# endif +#endif + +/* a little trick to accommodate both "#define _LARGEFILE64_SOURCE" and + * "#define _LARGEFILE64_SOURCE 1" as requesting 64-bit operations, (even + * though the former does not conform to the LFS document), but considering + * both "#undef _LARGEFILE64_SOURCE" and "#define _LARGEFILE64_SOURCE 0" as + * equivalently requesting no 64-bit operations + */ +#if defined(_LARGEFILE64_SOURCE) && -_LARGEFILE64_SOURCE - -1 == 1 +# undef _LARGEFILE64_SOURCE +#endif + +#if defined(__WATCOMC__) && !defined(Z_HAVE_UNISTD_H) +# define Z_HAVE_UNISTD_H +#endif +#ifndef Z_SOLO +# if defined(Z_HAVE_UNISTD_H) || defined(_LARGEFILE64_SOURCE) +# include /* for SEEK_*, off_t, and _LFS64_LARGEFILE */ +# ifdef VMS +# include /* for off_t */ +# endif +# ifndef z_off_t +# define z_off_t off_t +# endif +# endif +#endif + +#if defined(_LFS64_LARGEFILE) && _LFS64_LARGEFILE-0 +# define Z_LFS64 +#endif + +#if defined(_LARGEFILE64_SOURCE) && defined(Z_LFS64) +# define Z_LARGE64 +#endif + +#if defined(_FILE_OFFSET_BITS) && _FILE_OFFSET_BITS-0 == 64 && defined(Z_LFS64) +# define Z_WANT64 +#endif + +#if !defined(SEEK_SET) && !defined(Z_SOLO) +# define SEEK_SET 0 /* Seek from beginning of file. */ +# define SEEK_CUR 1 /* Seek from current position. */ +# define SEEK_END 2 /* Set file pointer to EOF plus "offset" */ +#endif + +#ifndef z_off_t +# define z_off_t long +#endif + +#if !defined(_WIN32) && defined(Z_LARGE64) +# define z_off64_t off64_t +#else +# if defined(_WIN32) && !defined(__GNUC__) && !defined(Z_SOLO) +# define z_off64_t __int64 +# else +# define z_off64_t z_off_t +# endif +#endif + +/* MVS linker does not support external names larger than 8 bytes */ +#if defined(__MVS__) + #pragma map(deflateInit_,"DEIN") + #pragma map(deflateInit2_,"DEIN2") + #pragma map(deflateEnd,"DEEND") + #pragma map(deflateBound,"DEBND") + #pragma map(inflateInit_,"ININ") + #pragma map(inflateInit2_,"ININ2") + #pragma map(inflateEnd,"INEND") + #pragma map(inflateSync,"INSY") + #pragma map(inflateSetDictionary,"INSEDI") + #pragma map(compressBound,"CMBND") + #pragma map(inflate_table,"INTABL") + #pragma map(inflate_fast,"INFA") + #pragma map(inflate_copyright,"INCOPY") +#endif + +#endif /* ZCONF_H */ diff --git a/software/scsi2sd-util/zlib-1.2.8/zlib.3 b/software/scsi2sd-util/zlib-1.2.8/zlib.3 new file mode 100644 index 0000000..0160e62 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/zlib.3 @@ -0,0 +1,151 @@ +.TH ZLIB 3 "28 Apr 2013" +.SH NAME +zlib \- compression/decompression library +.SH SYNOPSIS +[see +.I zlib.h +for full description] +.SH DESCRIPTION +The +.I zlib +library is a general purpose data compression library. +The code is thread safe, assuming that the standard library functions +used are thread safe, such as memory allocation routines. +It provides in-memory compression and decompression functions, +including integrity checks of the uncompressed data. +This version of the library supports only one compression method (deflation) +but other algorithms may be added later +with the same stream interface. +.LP +Compression can be done in a single step if the buffers are large enough +or can be done by repeated calls of the compression function. +In the latter case, +the application must provide more input and/or consume the output +(providing more output space) before each call. +.LP +The library also supports reading and writing files in +.IR gzip (1) +(.gz) format +with an interface similar to that of stdio. +.LP +The library does not install any signal handler. +The decoder checks the consistency of the compressed data, +so the library should never crash even in the case of corrupted input. +.LP +All functions of the compression library are documented in the file +.IR zlib.h . +The distribution source includes examples of use of the library +in the files +.I test/example.c +and +.IR test/minigzip.c, +as well as other examples in the +.IR examples/ +directory. +.LP +Changes to this version are documented in the file +.I ChangeLog +that accompanies the source. +.LP +.I zlib +is available in Java using the java.util.zip package: +.IP +http://java.sun.com/developer/technicalArticles/Programming/compression/ +.LP +A Perl interface to +.IR zlib , +written by Paul Marquess (pmqs@cpan.org), +is available at CPAN (Comprehensive Perl Archive Network) sites, +including: +.IP +http://search.cpan.org/~pmqs/IO-Compress-Zlib/ +.LP +A Python interface to +.IR zlib , +written by A.M. Kuchling (amk@magnet.com), +is available in Python 1.5 and later versions: +.IP +http://docs.python.org/library/zlib.html +.LP +.I zlib +is built into +.IR tcl: +.IP +http://wiki.tcl.tk/4610 +.LP +An experimental package to read and write files in .zip format, +written on top of +.I zlib +by Gilles Vollant (info@winimage.com), +is available at: +.IP +http://www.winimage.com/zLibDll/minizip.html +and also in the +.I contrib/minizip +directory of the main +.I zlib +source distribution. +.SH "SEE ALSO" +The +.I zlib +web site can be found at: +.IP +http://zlib.net/ +.LP +The data format used by the zlib library is described by RFC +(Request for Comments) 1950 to 1952 in the files: +.IP +http://tools.ietf.org/html/rfc1950 (for the zlib header and trailer format) +.br +http://tools.ietf.org/html/rfc1951 (for the deflate compressed data format) +.br +http://tools.ietf.org/html/rfc1952 (for the gzip header and trailer format) +.LP +Mark Nelson wrote an article about +.I zlib +for the Jan. 1997 issue of Dr. Dobb's Journal; +a copy of the article is available at: +.IP +http://marknelson.us/1997/01/01/zlib-engine/ +.SH "REPORTING PROBLEMS" +Before reporting a problem, +please check the +.I zlib +web site to verify that you have the latest version of +.IR zlib ; +otherwise, +obtain the latest version and see if the problem still exists. +Please read the +.I zlib +FAQ at: +.IP +http://zlib.net/zlib_faq.html +.LP +before asking for help. +Send questions and/or comments to zlib@gzip.org, +or (for the Windows DLL version) to Gilles Vollant (info@winimage.com). +.SH AUTHORS +Version 1.2.8 +Copyright (C) 1995-2013 Jean-loup Gailly (jloup@gzip.org) +and Mark Adler (madler@alumni.caltech.edu). +.LP +This software is provided "as-is," +without any express or implied warranty. +In no event will the authors be held liable for any damages +arising from the use of this software. +See the distribution directory with respect to requirements +governing redistribution. +The deflate format used by +.I zlib +was defined by Phil Katz. +The deflate and +.I zlib +specifications were written by L. Peter Deutsch. +Thanks to all the people who reported problems and suggested various +improvements in +.IR zlib ; +who are too numerous to cite here. +.LP +UNIX manual page by R. P. C. Rodgers, +U.S. National Library of Medicine (rodgers@nlm.nih.gov). +.\" end of man page diff --git a/software/scsi2sd-util/zlib-1.2.8/zlib.3.pdf b/software/scsi2sd-util/zlib-1.2.8/zlib.3.pdf new file mode 100644 index 0000000..a346b5d Binary files /dev/null and b/software/scsi2sd-util/zlib-1.2.8/zlib.3.pdf differ diff --git a/software/scsi2sd-util/zlib-1.2.8/zlib.h b/software/scsi2sd-util/zlib-1.2.8/zlib.h new file mode 100644 index 0000000..3e0c767 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/zlib.h @@ -0,0 +1,1768 @@ +/* zlib.h -- interface of the 'zlib' general purpose compression library + version 1.2.8, April 28th, 2013 + + Copyright (C) 1995-2013 Jean-loup Gailly and Mark Adler + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. + + Jean-loup Gailly Mark Adler + jloup@gzip.org madler@alumni.caltech.edu + + + The data format used by the zlib library is described by RFCs (Request for + Comments) 1950 to 1952 in the files http://tools.ietf.org/html/rfc1950 + (zlib format), rfc1951 (deflate format) and rfc1952 (gzip format). +*/ + +#ifndef ZLIB_H +#define ZLIB_H + +#include "zconf.h" + +#ifdef __cplusplus +extern "C" { +#endif + +#define ZLIB_VERSION "1.2.8" +#define ZLIB_VERNUM 0x1280 +#define ZLIB_VER_MAJOR 1 +#define ZLIB_VER_MINOR 2 +#define ZLIB_VER_REVISION 8 +#define ZLIB_VER_SUBREVISION 0 + +/* + The 'zlib' compression library provides in-memory compression and + decompression functions, including integrity checks of the uncompressed data. + This version of the library supports only one compression method (deflation) + but other algorithms will be added later and will have the same stream + interface. + + Compression can be done in a single step if the buffers are large enough, + or can be done by repeated calls of the compression function. In the latter + case, the application must provide more input and/or consume the output + (providing more output space) before each call. + + The compressed data format used by default by the in-memory functions is + the zlib format, which is a zlib wrapper documented in RFC 1950, wrapped + around a deflate stream, which is itself documented in RFC 1951. + + The library also supports reading and writing files in gzip (.gz) format + with an interface similar to that of stdio using the functions that start + with "gz". The gzip format is different from the zlib format. gzip is a + gzip wrapper, documented in RFC 1952, wrapped around a deflate stream. + + This library can optionally read and write gzip streams in memory as well. + + The zlib format was designed to be compact and fast for use in memory + and on communications channels. The gzip format was designed for single- + file compression on file systems, has a larger header than zlib to maintain + directory information, and uses a different, slower check method than zlib. + + The library does not install any signal handler. The decoder checks + the consistency of the compressed data, so the library should never crash + even in case of corrupted input. +*/ + +typedef voidpf (*alloc_func) OF((voidpf opaque, uInt items, uInt size)); +typedef void (*free_func) OF((voidpf opaque, voidpf address)); + +struct internal_state; + +typedef struct z_stream_s { + z_const Bytef *next_in; /* next input byte */ + uInt avail_in; /* number of bytes available at next_in */ + uLong total_in; /* total number of input bytes read so far */ + + Bytef *next_out; /* next output byte should be put there */ + uInt avail_out; /* remaining free space at next_out */ + uLong total_out; /* total number of bytes output so far */ + + z_const char *msg; /* last error message, NULL if no error */ + struct internal_state FAR *state; /* not visible by applications */ + + alloc_func zalloc; /* used to allocate the internal state */ + free_func zfree; /* used to free the internal state */ + voidpf opaque; /* private data object passed to zalloc and zfree */ + + int data_type; /* best guess about the data type: binary or text */ + uLong adler; /* adler32 value of the uncompressed data */ + uLong reserved; /* reserved for future use */ +} z_stream; + +typedef z_stream FAR *z_streamp; + +/* + gzip header information passed to and from zlib routines. See RFC 1952 + for more details on the meanings of these fields. +*/ +typedef struct gz_header_s { + int text; /* true if compressed data believed to be text */ + uLong time; /* modification time */ + int xflags; /* extra flags (not used when writing a gzip file) */ + int os; /* operating system */ + Bytef *extra; /* pointer to extra field or Z_NULL if none */ + uInt extra_len; /* extra field length (valid if extra != Z_NULL) */ + uInt extra_max; /* space at extra (only when reading header) */ + Bytef *name; /* pointer to zero-terminated file name or Z_NULL */ + uInt name_max; /* space at name (only when reading header) */ + Bytef *comment; /* pointer to zero-terminated comment or Z_NULL */ + uInt comm_max; /* space at comment (only when reading header) */ + int hcrc; /* true if there was or will be a header crc */ + int done; /* true when done reading gzip header (not used + when writing a gzip file) */ +} gz_header; + +typedef gz_header FAR *gz_headerp; + +/* + The application must update next_in and avail_in when avail_in has dropped + to zero. It must update next_out and avail_out when avail_out has dropped + to zero. The application must initialize zalloc, zfree and opaque before + calling the init function. All other fields are set by the compression + library and must not be updated by the application. + + The opaque value provided by the application will be passed as the first + parameter for calls of zalloc and zfree. This can be useful for custom + memory management. The compression library attaches no meaning to the + opaque value. + + zalloc must return Z_NULL if there is not enough memory for the object. + If zlib is used in a multi-threaded application, zalloc and zfree must be + thread safe. + + On 16-bit systems, the functions zalloc and zfree must be able to allocate + exactly 65536 bytes, but will not be required to allocate more than this if + the symbol MAXSEG_64K is defined (see zconf.h). WARNING: On MSDOS, pointers + returned by zalloc for objects of exactly 65536 bytes *must* have their + offset normalized to zero. The default allocation function provided by this + library ensures this (see zutil.c). To reduce memory requirements and avoid + any allocation of 64K objects, at the expense of compression ratio, compile + the library with -DMAX_WBITS=14 (see zconf.h). + + The fields total_in and total_out can be used for statistics or progress + reports. After compression, total_in holds the total size of the + uncompressed data and may be saved for use in the decompressor (particularly + if the decompressor wants to decompress everything in a single step). +*/ + + /* constants */ + +#define Z_NO_FLUSH 0 +#define Z_PARTIAL_FLUSH 1 +#define Z_SYNC_FLUSH 2 +#define Z_FULL_FLUSH 3 +#define Z_FINISH 4 +#define Z_BLOCK 5 +#define Z_TREES 6 +/* Allowed flush values; see deflate() and inflate() below for details */ + +#define Z_OK 0 +#define Z_STREAM_END 1 +#define Z_NEED_DICT 2 +#define Z_ERRNO (-1) +#define Z_STREAM_ERROR (-2) +#define Z_DATA_ERROR (-3) +#define Z_MEM_ERROR (-4) +#define Z_BUF_ERROR (-5) +#define Z_VERSION_ERROR (-6) +/* Return codes for the compression/decompression functions. Negative values + * are errors, positive values are used for special but normal events. + */ + +#define Z_NO_COMPRESSION 0 +#define Z_BEST_SPEED 1 +#define Z_BEST_COMPRESSION 9 +#define Z_DEFAULT_COMPRESSION (-1) +/* compression levels */ + +#define Z_FILTERED 1 +#define Z_HUFFMAN_ONLY 2 +#define Z_RLE 3 +#define Z_FIXED 4 +#define Z_DEFAULT_STRATEGY 0 +/* compression strategy; see deflateInit2() below for details */ + +#define Z_BINARY 0 +#define Z_TEXT 1 +#define Z_ASCII Z_TEXT /* for compatibility with 1.2.2 and earlier */ +#define Z_UNKNOWN 2 +/* Possible values of the data_type field (though see inflate()) */ + +#define Z_DEFLATED 8 +/* The deflate compression method (the only one supported in this version) */ + +#define Z_NULL 0 /* for initializing zalloc, zfree, opaque */ + +#define zlib_version zlibVersion() +/* for compatibility with versions < 1.0.2 */ + + + /* basic functions */ + +ZEXTERN const char * ZEXPORT zlibVersion OF((void)); +/* The application can compare zlibVersion and ZLIB_VERSION for consistency. + If the first character differs, the library code actually used is not + compatible with the zlib.h header file used by the application. This check + is automatically made by deflateInit and inflateInit. + */ + +/* +ZEXTERN int ZEXPORT deflateInit OF((z_streamp strm, int level)); + + Initializes the internal stream state for compression. The fields + zalloc, zfree and opaque must be initialized before by the caller. If + zalloc and zfree are set to Z_NULL, deflateInit updates them to use default + allocation functions. + + The compression level must be Z_DEFAULT_COMPRESSION, or between 0 and 9: + 1 gives best speed, 9 gives best compression, 0 gives no compression at all + (the input data is simply copied a block at a time). Z_DEFAULT_COMPRESSION + requests a default compromise between speed and compression (currently + equivalent to level 6). + + deflateInit returns Z_OK if success, Z_MEM_ERROR if there was not enough + memory, Z_STREAM_ERROR if level is not a valid compression level, or + Z_VERSION_ERROR if the zlib library version (zlib_version) is incompatible + with the version assumed by the caller (ZLIB_VERSION). msg is set to null + if there is no error message. deflateInit does not perform any compression: + this will be done by deflate(). +*/ + + +ZEXTERN int ZEXPORT deflate OF((z_streamp strm, int flush)); +/* + deflate compresses as much data as possible, and stops when the input + buffer becomes empty or the output buffer becomes full. It may introduce + some output latency (reading input without producing any output) except when + forced to flush. + + The detailed semantics are as follows. deflate performs one or both of the + following actions: + + - Compress more input starting at next_in and update next_in and avail_in + accordingly. If not all input can be processed (because there is not + enough room in the output buffer), next_in and avail_in are updated and + processing will resume at this point for the next call of deflate(). + + - Provide more output starting at next_out and update next_out and avail_out + accordingly. This action is forced if the parameter flush is non zero. + Forcing flush frequently degrades the compression ratio, so this parameter + should be set only when necessary (in interactive applications). Some + output may be provided even if flush is not set. + + Before the call of deflate(), the application should ensure that at least + one of the actions is possible, by providing more input and/or consuming more + output, and updating avail_in or avail_out accordingly; avail_out should + never be zero before the call. The application can consume the compressed + output when it wants, for example when the output buffer is full (avail_out + == 0), or after each call of deflate(). If deflate returns Z_OK and with + zero avail_out, it must be called again after making room in the output + buffer because there might be more output pending. + + Normally the parameter flush is set to Z_NO_FLUSH, which allows deflate to + decide how much data to accumulate before producing output, in order to + maximize compression. + + If the parameter flush is set to Z_SYNC_FLUSH, all pending output is + flushed to the output buffer and the output is aligned on a byte boundary, so + that the decompressor can get all input data available so far. (In + particular avail_in is zero after the call if enough output space has been + provided before the call.) Flushing may degrade compression for some + compression algorithms and so it should be used only when necessary. This + completes the current deflate block and follows it with an empty stored block + that is three bits plus filler bits to the next byte, followed by four bytes + (00 00 ff ff). + + If flush is set to Z_PARTIAL_FLUSH, all pending output is flushed to the + output buffer, but the output is not aligned to a byte boundary. All of the + input data so far will be available to the decompressor, as for Z_SYNC_FLUSH. + This completes the current deflate block and follows it with an empty fixed + codes block that is 10 bits long. This assures that enough bytes are output + in order for the decompressor to finish the block before the empty fixed code + block. + + If flush is set to Z_BLOCK, a deflate block is completed and emitted, as + for Z_SYNC_FLUSH, but the output is not aligned on a byte boundary, and up to + seven bits of the current block are held to be written as the next byte after + the next deflate block is completed. In this case, the decompressor may not + be provided enough bits at this point in order to complete decompression of + the data provided so far to the compressor. It may need to wait for the next + block to be emitted. This is for advanced applications that need to control + the emission of deflate blocks. + + If flush is set to Z_FULL_FLUSH, all output is flushed as with + Z_SYNC_FLUSH, and the compression state is reset so that decompression can + restart from this point if previous compressed data has been damaged or if + random access is desired. Using Z_FULL_FLUSH too often can seriously degrade + compression. + + If deflate returns with avail_out == 0, this function must be called again + with the same value of the flush parameter and more output space (updated + avail_out), until the flush is complete (deflate returns with non-zero + avail_out). In the case of a Z_FULL_FLUSH or Z_SYNC_FLUSH, make sure that + avail_out is greater than six to avoid repeated flush markers due to + avail_out == 0 on return. + + If the parameter flush is set to Z_FINISH, pending input is processed, + pending output is flushed and deflate returns with Z_STREAM_END if there was + enough output space; if deflate returns with Z_OK, this function must be + called again with Z_FINISH and more output space (updated avail_out) but no + more input data, until it returns with Z_STREAM_END or an error. After + deflate has returned Z_STREAM_END, the only possible operations on the stream + are deflateReset or deflateEnd. + + Z_FINISH can be used immediately after deflateInit if all the compression + is to be done in a single step. In this case, avail_out must be at least the + value returned by deflateBound (see below). Then deflate is guaranteed to + return Z_STREAM_END. If not enough output space is provided, deflate will + not return Z_STREAM_END, and it must be called again as described above. + + deflate() sets strm->adler to the adler32 checksum of all input read + so far (that is, total_in bytes). + + deflate() may update strm->data_type if it can make a good guess about + the input data type (Z_BINARY or Z_TEXT). In doubt, the data is considered + binary. This field is only for information purposes and does not affect the + compression algorithm in any manner. + + deflate() returns Z_OK if some progress has been made (more input + processed or more output produced), Z_STREAM_END if all input has been + consumed and all output has been produced (only when flush is set to + Z_FINISH), Z_STREAM_ERROR if the stream state was inconsistent (for example + if next_in or next_out was Z_NULL), Z_BUF_ERROR if no progress is possible + (for example avail_in or avail_out was zero). Note that Z_BUF_ERROR is not + fatal, and deflate() can be called again with more input and more output + space to continue compressing. +*/ + + +ZEXTERN int ZEXPORT deflateEnd OF((z_streamp strm)); +/* + All dynamically allocated data structures for this stream are freed. + This function discards any unprocessed input and does not flush any pending + output. + + deflateEnd returns Z_OK if success, Z_STREAM_ERROR if the + stream state was inconsistent, Z_DATA_ERROR if the stream was freed + prematurely (some input or output was discarded). In the error case, msg + may be set but then points to a static string (which must not be + deallocated). +*/ + + +/* +ZEXTERN int ZEXPORT inflateInit OF((z_streamp strm)); + + Initializes the internal stream state for decompression. The fields + next_in, avail_in, zalloc, zfree and opaque must be initialized before by + the caller. If next_in is not Z_NULL and avail_in is large enough (the + exact value depends on the compression method), inflateInit determines the + compression method from the zlib header and allocates all data structures + accordingly; otherwise the allocation will be deferred to the first call of + inflate. If zalloc and zfree are set to Z_NULL, inflateInit updates them to + use default allocation functions. + + inflateInit returns Z_OK if success, Z_MEM_ERROR if there was not enough + memory, Z_VERSION_ERROR if the zlib library version is incompatible with the + version assumed by the caller, or Z_STREAM_ERROR if the parameters are + invalid, such as a null pointer to the structure. msg is set to null if + there is no error message. inflateInit does not perform any decompression + apart from possibly reading the zlib header if present: actual decompression + will be done by inflate(). (So next_in and avail_in may be modified, but + next_out and avail_out are unused and unchanged.) The current implementation + of inflateInit() does not process any header information -- that is deferred + until inflate() is called. +*/ + + +ZEXTERN int ZEXPORT inflate OF((z_streamp strm, int flush)); +/* + inflate decompresses as much data as possible, and stops when the input + buffer becomes empty or the output buffer becomes full. It may introduce + some output latency (reading input without producing any output) except when + forced to flush. + + The detailed semantics are as follows. inflate performs one or both of the + following actions: + + - Decompress more input starting at next_in and update next_in and avail_in + accordingly. If not all input can be processed (because there is not + enough room in the output buffer), next_in is updated and processing will + resume at this point for the next call of inflate(). + + - Provide more output starting at next_out and update next_out and avail_out + accordingly. inflate() provides as much output as possible, until there is + no more input data or no more space in the output buffer (see below about + the flush parameter). + + Before the call of inflate(), the application should ensure that at least + one of the actions is possible, by providing more input and/or consuming more + output, and updating the next_* and avail_* values accordingly. The + application can consume the uncompressed output when it wants, for example + when the output buffer is full (avail_out == 0), or after each call of + inflate(). If inflate returns Z_OK and with zero avail_out, it must be + called again after making room in the output buffer because there might be + more output pending. + + The flush parameter of inflate() can be Z_NO_FLUSH, Z_SYNC_FLUSH, Z_FINISH, + Z_BLOCK, or Z_TREES. Z_SYNC_FLUSH requests that inflate() flush as much + output as possible to the output buffer. Z_BLOCK requests that inflate() + stop if and when it gets to the next deflate block boundary. When decoding + the zlib or gzip format, this will cause inflate() to return immediately + after the header and before the first block. When doing a raw inflate, + inflate() will go ahead and process the first block, and will return when it + gets to the end of that block, or when it runs out of data. + + The Z_BLOCK option assists in appending to or combining deflate streams. + Also to assist in this, on return inflate() will set strm->data_type to the + number of unused bits in the last byte taken from strm->next_in, plus 64 if + inflate() is currently decoding the last block in the deflate stream, plus + 128 if inflate() returned immediately after decoding an end-of-block code or + decoding the complete header up to just before the first byte of the deflate + stream. The end-of-block will not be indicated until all of the uncompressed + data from that block has been written to strm->next_out. The number of + unused bits may in general be greater than seven, except when bit 7 of + data_type is set, in which case the number of unused bits will be less than + eight. data_type is set as noted here every time inflate() returns for all + flush options, and so can be used to determine the amount of currently + consumed input in bits. + + The Z_TREES option behaves as Z_BLOCK does, but it also returns when the + end of each deflate block header is reached, before any actual data in that + block is decoded. This allows the caller to determine the length of the + deflate block header for later use in random access within a deflate block. + 256 is added to the value of strm->data_type when inflate() returns + immediately after reaching the end of the deflate block header. + + inflate() should normally be called until it returns Z_STREAM_END or an + error. However if all decompression is to be performed in a single step (a + single call of inflate), the parameter flush should be set to Z_FINISH. In + this case all pending input is processed and all pending output is flushed; + avail_out must be large enough to hold all of the uncompressed data for the + operation to complete. (The size of the uncompressed data may have been + saved by the compressor for this purpose.) The use of Z_FINISH is not + required to perform an inflation in one step. However it may be used to + inform inflate that a faster approach can be used for the single inflate() + call. Z_FINISH also informs inflate to not maintain a sliding window if the + stream completes, which reduces inflate's memory footprint. If the stream + does not complete, either because not all of the stream is provided or not + enough output space is provided, then a sliding window will be allocated and + inflate() can be called again to continue the operation as if Z_NO_FLUSH had + been used. + + In this implementation, inflate() always flushes as much output as + possible to the output buffer, and always uses the faster approach on the + first call. So the effects of the flush parameter in this implementation are + on the return value of inflate() as noted below, when inflate() returns early + when Z_BLOCK or Z_TREES is used, and when inflate() avoids the allocation of + memory for a sliding window when Z_FINISH is used. + + If a preset dictionary is needed after this call (see inflateSetDictionary + below), inflate sets strm->adler to the Adler-32 checksum of the dictionary + chosen by the compressor and returns Z_NEED_DICT; otherwise it sets + strm->adler to the Adler-32 checksum of all output produced so far (that is, + total_out bytes) and returns Z_OK, Z_STREAM_END or an error code as described + below. At the end of the stream, inflate() checks that its computed adler32 + checksum is equal to that saved by the compressor and returns Z_STREAM_END + only if the checksum is correct. + + inflate() can decompress and check either zlib-wrapped or gzip-wrapped + deflate data. The header type is detected automatically, if requested when + initializing with inflateInit2(). Any information contained in the gzip + header is not retained, so applications that need that information should + instead use raw inflate, see inflateInit2() below, or inflateBack() and + perform their own processing of the gzip header and trailer. When processing + gzip-wrapped deflate data, strm->adler32 is set to the CRC-32 of the output + producted so far. The CRC-32 is checked against the gzip trailer. + + inflate() returns Z_OK if some progress has been made (more input processed + or more output produced), Z_STREAM_END if the end of the compressed data has + been reached and all uncompressed output has been produced, Z_NEED_DICT if a + preset dictionary is needed at this point, Z_DATA_ERROR if the input data was + corrupted (input stream not conforming to the zlib format or incorrect check + value), Z_STREAM_ERROR if the stream structure was inconsistent (for example + next_in or next_out was Z_NULL), Z_MEM_ERROR if there was not enough memory, + Z_BUF_ERROR if no progress is possible or if there was not enough room in the + output buffer when Z_FINISH is used. Note that Z_BUF_ERROR is not fatal, and + inflate() can be called again with more input and more output space to + continue decompressing. If Z_DATA_ERROR is returned, the application may + then call inflateSync() to look for a good compression block if a partial + recovery of the data is desired. +*/ + + +ZEXTERN int ZEXPORT inflateEnd OF((z_streamp strm)); +/* + All dynamically allocated data structures for this stream are freed. + This function discards any unprocessed input and does not flush any pending + output. + + inflateEnd returns Z_OK if success, Z_STREAM_ERROR if the stream state + was inconsistent. In the error case, msg may be set but then points to a + static string (which must not be deallocated). +*/ + + + /* Advanced functions */ + +/* + The following functions are needed only in some special applications. +*/ + +/* +ZEXTERN int ZEXPORT deflateInit2 OF((z_streamp strm, + int level, + int method, + int windowBits, + int memLevel, + int strategy)); + + This is another version of deflateInit with more compression options. The + fields next_in, zalloc, zfree and opaque must be initialized before by the + caller. + + The method parameter is the compression method. It must be Z_DEFLATED in + this version of the library. + + The windowBits parameter is the base two logarithm of the window size + (the size of the history buffer). It should be in the range 8..15 for this + version of the library. Larger values of this parameter result in better + compression at the expense of memory usage. The default value is 15 if + deflateInit is used instead. + + windowBits can also be -8..-15 for raw deflate. In this case, -windowBits + determines the window size. deflate() will then generate raw deflate data + with no zlib header or trailer, and will not compute an adler32 check value. + + windowBits can also be greater than 15 for optional gzip encoding. Add + 16 to windowBits to write a simple gzip header and trailer around the + compressed data instead of a zlib wrapper. The gzip header will have no + file name, no extra data, no comment, no modification time (set to zero), no + header crc, and the operating system will be set to 255 (unknown). If a + gzip stream is being written, strm->adler is a crc32 instead of an adler32. + + The memLevel parameter specifies how much memory should be allocated + for the internal compression state. memLevel=1 uses minimum memory but is + slow and reduces compression ratio; memLevel=9 uses maximum memory for + optimal speed. The default value is 8. See zconf.h for total memory usage + as a function of windowBits and memLevel. + + The strategy parameter is used to tune the compression algorithm. Use the + value Z_DEFAULT_STRATEGY for normal data, Z_FILTERED for data produced by a + filter (or predictor), Z_HUFFMAN_ONLY to force Huffman encoding only (no + string match), or Z_RLE to limit match distances to one (run-length + encoding). Filtered data consists mostly of small values with a somewhat + random distribution. In this case, the compression algorithm is tuned to + compress them better. The effect of Z_FILTERED is to force more Huffman + coding and less string matching; it is somewhat intermediate between + Z_DEFAULT_STRATEGY and Z_HUFFMAN_ONLY. Z_RLE is designed to be almost as + fast as Z_HUFFMAN_ONLY, but give better compression for PNG image data. The + strategy parameter only affects the compression ratio but not the + correctness of the compressed output even if it is not set appropriately. + Z_FIXED prevents the use of dynamic Huffman codes, allowing for a simpler + decoder for special applications. + + deflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough + memory, Z_STREAM_ERROR if any parameter is invalid (such as an invalid + method), or Z_VERSION_ERROR if the zlib library version (zlib_version) is + incompatible with the version assumed by the caller (ZLIB_VERSION). msg is + set to null if there is no error message. deflateInit2 does not perform any + compression: this will be done by deflate(). +*/ + +ZEXTERN int ZEXPORT deflateSetDictionary OF((z_streamp strm, + const Bytef *dictionary, + uInt dictLength)); +/* + Initializes the compression dictionary from the given byte sequence + without producing any compressed output. When using the zlib format, this + function must be called immediately after deflateInit, deflateInit2 or + deflateReset, and before any call of deflate. When doing raw deflate, this + function must be called either before any call of deflate, or immediately + after the completion of a deflate block, i.e. after all input has been + consumed and all output has been delivered when using any of the flush + options Z_BLOCK, Z_PARTIAL_FLUSH, Z_SYNC_FLUSH, or Z_FULL_FLUSH. The + compressor and decompressor must use exactly the same dictionary (see + inflateSetDictionary). + + The dictionary should consist of strings (byte sequences) that are likely + to be encountered later in the data to be compressed, with the most commonly + used strings preferably put towards the end of the dictionary. Using a + dictionary is most useful when the data to be compressed is short and can be + predicted with good accuracy; the data can then be compressed better than + with the default empty dictionary. + + Depending on the size of the compression data structures selected by + deflateInit or deflateInit2, a part of the dictionary may in effect be + discarded, for example if the dictionary is larger than the window size + provided in deflateInit or deflateInit2. Thus the strings most likely to be + useful should be put at the end of the dictionary, not at the front. In + addition, the current implementation of deflate will use at most the window + size minus 262 bytes of the provided dictionary. + + Upon return of this function, strm->adler is set to the adler32 value + of the dictionary; the decompressor may later use this value to determine + which dictionary has been used by the compressor. (The adler32 value + applies to the whole dictionary even if only a subset of the dictionary is + actually used by the compressor.) If a raw deflate was requested, then the + adler32 value is not computed and strm->adler is not set. + + deflateSetDictionary returns Z_OK if success, or Z_STREAM_ERROR if a + parameter is invalid (e.g. dictionary being Z_NULL) or the stream state is + inconsistent (for example if deflate has already been called for this stream + or if not at a block boundary for raw deflate). deflateSetDictionary does + not perform any compression: this will be done by deflate(). +*/ + +ZEXTERN int ZEXPORT deflateCopy OF((z_streamp dest, + z_streamp source)); +/* + Sets the destination stream as a complete copy of the source stream. + + This function can be useful when several compression strategies will be + tried, for example when there are several ways of pre-processing the input + data with a filter. The streams that will be discarded should then be freed + by calling deflateEnd. Note that deflateCopy duplicates the internal + compression state which can be quite large, so this strategy is slow and can + consume lots of memory. + + deflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not + enough memory, Z_STREAM_ERROR if the source stream state was inconsistent + (such as zalloc being Z_NULL). msg is left unchanged in both source and + destination. +*/ + +ZEXTERN int ZEXPORT deflateReset OF((z_streamp strm)); +/* + This function is equivalent to deflateEnd followed by deflateInit, + but does not free and reallocate all the internal compression state. The + stream will keep the same compression level and any other attributes that + may have been set by deflateInit2. + + deflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source + stream state was inconsistent (such as zalloc or state being Z_NULL). +*/ + +ZEXTERN int ZEXPORT deflateParams OF((z_streamp strm, + int level, + int strategy)); +/* + Dynamically update the compression level and compression strategy. The + interpretation of level and strategy is as in deflateInit2. This can be + used to switch between compression and straight copy of the input data, or + to switch to a different kind of input data requiring a different strategy. + If the compression level is changed, the input available so far is + compressed with the old level (and may be flushed); the new level will take + effect only at the next call of deflate(). + + Before the call of deflateParams, the stream state must be set as for + a call of deflate(), since the currently available input may have to be + compressed and flushed. In particular, strm->avail_out must be non-zero. + + deflateParams returns Z_OK if success, Z_STREAM_ERROR if the source + stream state was inconsistent or if a parameter was invalid, Z_BUF_ERROR if + strm->avail_out was zero. +*/ + +ZEXTERN int ZEXPORT deflateTune OF((z_streamp strm, + int good_length, + int max_lazy, + int nice_length, + int max_chain)); +/* + Fine tune deflate's internal compression parameters. This should only be + used by someone who understands the algorithm used by zlib's deflate for + searching for the best matching string, and even then only by the most + fanatic optimizer trying to squeeze out the last compressed bit for their + specific input data. Read the deflate.c source code for the meaning of the + max_lazy, good_length, nice_length, and max_chain parameters. + + deflateTune() can be called after deflateInit() or deflateInit2(), and + returns Z_OK on success, or Z_STREAM_ERROR for an invalid deflate stream. + */ + +ZEXTERN uLong ZEXPORT deflateBound OF((z_streamp strm, + uLong sourceLen)); +/* + deflateBound() returns an upper bound on the compressed size after + deflation of sourceLen bytes. It must be called after deflateInit() or + deflateInit2(), and after deflateSetHeader(), if used. This would be used + to allocate an output buffer for deflation in a single pass, and so would be + called before deflate(). If that first deflate() call is provided the + sourceLen input bytes, an output buffer allocated to the size returned by + deflateBound(), and the flush value Z_FINISH, then deflate() is guaranteed + to return Z_STREAM_END. Note that it is possible for the compressed size to + be larger than the value returned by deflateBound() if flush options other + than Z_FINISH or Z_NO_FLUSH are used. +*/ + +ZEXTERN int ZEXPORT deflatePending OF((z_streamp strm, + unsigned *pending, + int *bits)); +/* + deflatePending() returns the number of bytes and bits of output that have + been generated, but not yet provided in the available output. The bytes not + provided would be due to the available output space having being consumed. + The number of bits of output not provided are between 0 and 7, where they + await more bits to join them in order to fill out a full byte. If pending + or bits are Z_NULL, then those values are not set. + + deflatePending returns Z_OK if success, or Z_STREAM_ERROR if the source + stream state was inconsistent. + */ + +ZEXTERN int ZEXPORT deflatePrime OF((z_streamp strm, + int bits, + int value)); +/* + deflatePrime() inserts bits in the deflate output stream. The intent + is that this function is used to start off the deflate output with the bits + leftover from a previous deflate stream when appending to it. As such, this + function can only be used for raw deflate, and must be used before the first + deflate() call after a deflateInit2() or deflateReset(). bits must be less + than or equal to 16, and that many of the least significant bits of value + will be inserted in the output. + + deflatePrime returns Z_OK if success, Z_BUF_ERROR if there was not enough + room in the internal buffer to insert the bits, or Z_STREAM_ERROR if the + source stream state was inconsistent. +*/ + +ZEXTERN int ZEXPORT deflateSetHeader OF((z_streamp strm, + gz_headerp head)); +/* + deflateSetHeader() provides gzip header information for when a gzip + stream is requested by deflateInit2(). deflateSetHeader() may be called + after deflateInit2() or deflateReset() and before the first call of + deflate(). The text, time, os, extra field, name, and comment information + in the provided gz_header structure are written to the gzip header (xflag is + ignored -- the extra flags are set according to the compression level). The + caller must assure that, if not Z_NULL, name and comment are terminated with + a zero byte, and that if extra is not Z_NULL, that extra_len bytes are + available there. If hcrc is true, a gzip header crc is included. Note that + the current versions of the command-line version of gzip (up through version + 1.3.x) do not support header crc's, and will report that it is a "multi-part + gzip file" and give up. + + If deflateSetHeader is not used, the default gzip header has text false, + the time set to zero, and os set to 255, with no extra, name, or comment + fields. The gzip header is returned to the default state by deflateReset(). + + deflateSetHeader returns Z_OK if success, or Z_STREAM_ERROR if the source + stream state was inconsistent. +*/ + +/* +ZEXTERN int ZEXPORT inflateInit2 OF((z_streamp strm, + int windowBits)); + + This is another version of inflateInit with an extra parameter. The + fields next_in, avail_in, zalloc, zfree and opaque must be initialized + before by the caller. + + The windowBits parameter is the base two logarithm of the maximum window + size (the size of the history buffer). It should be in the range 8..15 for + this version of the library. The default value is 15 if inflateInit is used + instead. windowBits must be greater than or equal to the windowBits value + provided to deflateInit2() while compressing, or it must be equal to 15 if + deflateInit2() was not used. If a compressed stream with a larger window + size is given as input, inflate() will return with the error code + Z_DATA_ERROR instead of trying to allocate a larger window. + + windowBits can also be zero to request that inflate use the window size in + the zlib header of the compressed stream. + + windowBits can also be -8..-15 for raw inflate. In this case, -windowBits + determines the window size. inflate() will then process raw deflate data, + not looking for a zlib or gzip header, not generating a check value, and not + looking for any check values for comparison at the end of the stream. This + is for use with other formats that use the deflate compressed data format + such as zip. Those formats provide their own check values. If a custom + format is developed using the raw deflate format for compressed data, it is + recommended that a check value such as an adler32 or a crc32 be applied to + the uncompressed data as is done in the zlib, gzip, and zip formats. For + most applications, the zlib format should be used as is. Note that comments + above on the use in deflateInit2() applies to the magnitude of windowBits. + + windowBits can also be greater than 15 for optional gzip decoding. Add + 32 to windowBits to enable zlib and gzip decoding with automatic header + detection, or add 16 to decode only the gzip format (the zlib format will + return a Z_DATA_ERROR). If a gzip stream is being decoded, strm->adler is a + crc32 instead of an adler32. + + inflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough + memory, Z_VERSION_ERROR if the zlib library version is incompatible with the + version assumed by the caller, or Z_STREAM_ERROR if the parameters are + invalid, such as a null pointer to the structure. msg is set to null if + there is no error message. inflateInit2 does not perform any decompression + apart from possibly reading the zlib header if present: actual decompression + will be done by inflate(). (So next_in and avail_in may be modified, but + next_out and avail_out are unused and unchanged.) The current implementation + of inflateInit2() does not process any header information -- that is + deferred until inflate() is called. +*/ + +ZEXTERN int ZEXPORT inflateSetDictionary OF((z_streamp strm, + const Bytef *dictionary, + uInt dictLength)); +/* + Initializes the decompression dictionary from the given uncompressed byte + sequence. This function must be called immediately after a call of inflate, + if that call returned Z_NEED_DICT. The dictionary chosen by the compressor + can be determined from the adler32 value returned by that call of inflate. + The compressor and decompressor must use exactly the same dictionary (see + deflateSetDictionary). For raw inflate, this function can be called at any + time to set the dictionary. If the provided dictionary is smaller than the + window and there is already data in the window, then the provided dictionary + will amend what's there. The application must insure that the dictionary + that was used for compression is provided. + + inflateSetDictionary returns Z_OK if success, Z_STREAM_ERROR if a + parameter is invalid (e.g. dictionary being Z_NULL) or the stream state is + inconsistent, Z_DATA_ERROR if the given dictionary doesn't match the + expected one (incorrect adler32 value). inflateSetDictionary does not + perform any decompression: this will be done by subsequent calls of + inflate(). +*/ + +ZEXTERN int ZEXPORT inflateGetDictionary OF((z_streamp strm, + Bytef *dictionary, + uInt *dictLength)); +/* + Returns the sliding dictionary being maintained by inflate. dictLength is + set to the number of bytes in the dictionary, and that many bytes are copied + to dictionary. dictionary must have enough space, where 32768 bytes is + always enough. If inflateGetDictionary() is called with dictionary equal to + Z_NULL, then only the dictionary length is returned, and nothing is copied. + Similary, if dictLength is Z_NULL, then it is not set. + + inflateGetDictionary returns Z_OK on success, or Z_STREAM_ERROR if the + stream state is inconsistent. +*/ + +ZEXTERN int ZEXPORT inflateSync OF((z_streamp strm)); +/* + Skips invalid compressed data until a possible full flush point (see above + for the description of deflate with Z_FULL_FLUSH) can be found, or until all + available input is skipped. No output is provided. + + inflateSync searches for a 00 00 FF FF pattern in the compressed data. + All full flush points have this pattern, but not all occurrences of this + pattern are full flush points. + + inflateSync returns Z_OK if a possible full flush point has been found, + Z_BUF_ERROR if no more input was provided, Z_DATA_ERROR if no flush point + has been found, or Z_STREAM_ERROR if the stream structure was inconsistent. + In the success case, the application may save the current current value of + total_in which indicates where valid compressed data was found. In the + error case, the application may repeatedly call inflateSync, providing more + input each time, until success or end of the input data. +*/ + +ZEXTERN int ZEXPORT inflateCopy OF((z_streamp dest, + z_streamp source)); +/* + Sets the destination stream as a complete copy of the source stream. + + This function can be useful when randomly accessing a large stream. The + first pass through the stream can periodically record the inflate state, + allowing restarting inflate at those points when randomly accessing the + stream. + + inflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not + enough memory, Z_STREAM_ERROR if the source stream state was inconsistent + (such as zalloc being Z_NULL). msg is left unchanged in both source and + destination. +*/ + +ZEXTERN int ZEXPORT inflateReset OF((z_streamp strm)); +/* + This function is equivalent to inflateEnd followed by inflateInit, + but does not free and reallocate all the internal decompression state. The + stream will keep attributes that may have been set by inflateInit2. + + inflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source + stream state was inconsistent (such as zalloc or state being Z_NULL). +*/ + +ZEXTERN int ZEXPORT inflateReset2 OF((z_streamp strm, + int windowBits)); +/* + This function is the same as inflateReset, but it also permits changing + the wrap and window size requests. The windowBits parameter is interpreted + the same as it is for inflateInit2. + + inflateReset2 returns Z_OK if success, or Z_STREAM_ERROR if the source + stream state was inconsistent (such as zalloc or state being Z_NULL), or if + the windowBits parameter is invalid. +*/ + +ZEXTERN int ZEXPORT inflatePrime OF((z_streamp strm, + int bits, + int value)); +/* + This function inserts bits in the inflate input stream. The intent is + that this function is used to start inflating at a bit position in the + middle of a byte. The provided bits will be used before any bytes are used + from next_in. This function should only be used with raw inflate, and + should be used before the first inflate() call after inflateInit2() or + inflateReset(). bits must be less than or equal to 16, and that many of the + least significant bits of value will be inserted in the input. + + If bits is negative, then the input stream bit buffer is emptied. Then + inflatePrime() can be called again to put bits in the buffer. This is used + to clear out bits leftover after feeding inflate a block description prior + to feeding inflate codes. + + inflatePrime returns Z_OK if success, or Z_STREAM_ERROR if the source + stream state was inconsistent. +*/ + +ZEXTERN long ZEXPORT inflateMark OF((z_streamp strm)); +/* + This function returns two values, one in the lower 16 bits of the return + value, and the other in the remaining upper bits, obtained by shifting the + return value down 16 bits. If the upper value is -1 and the lower value is + zero, then inflate() is currently decoding information outside of a block. + If the upper value is -1 and the lower value is non-zero, then inflate is in + the middle of a stored block, with the lower value equaling the number of + bytes from the input remaining to copy. If the upper value is not -1, then + it is the number of bits back from the current bit position in the input of + the code (literal or length/distance pair) currently being processed. In + that case the lower value is the number of bytes already emitted for that + code. + + A code is being processed if inflate is waiting for more input to complete + decoding of the code, or if it has completed decoding but is waiting for + more output space to write the literal or match data. + + inflateMark() is used to mark locations in the input data for random + access, which may be at bit positions, and to note those cases where the + output of a code may span boundaries of random access blocks. The current + location in the input stream can be determined from avail_in and data_type + as noted in the description for the Z_BLOCK flush parameter for inflate. + + inflateMark returns the value noted above or -1 << 16 if the provided + source stream state was inconsistent. +*/ + +ZEXTERN int ZEXPORT inflateGetHeader OF((z_streamp strm, + gz_headerp head)); +/* + inflateGetHeader() requests that gzip header information be stored in the + provided gz_header structure. inflateGetHeader() may be called after + inflateInit2() or inflateReset(), and before the first call of inflate(). + As inflate() processes the gzip stream, head->done is zero until the header + is completed, at which time head->done is set to one. If a zlib stream is + being decoded, then head->done is set to -1 to indicate that there will be + no gzip header information forthcoming. Note that Z_BLOCK or Z_TREES can be + used to force inflate() to return immediately after header processing is + complete and before any actual data is decompressed. + + The text, time, xflags, and os fields are filled in with the gzip header + contents. hcrc is set to true if there is a header CRC. (The header CRC + was valid if done is set to one.) If extra is not Z_NULL, then extra_max + contains the maximum number of bytes to write to extra. Once done is true, + extra_len contains the actual extra field length, and extra contains the + extra field, or that field truncated if extra_max is less than extra_len. + If name is not Z_NULL, then up to name_max characters are written there, + terminated with a zero unless the length is greater than name_max. If + comment is not Z_NULL, then up to comm_max characters are written there, + terminated with a zero unless the length is greater than comm_max. When any + of extra, name, or comment are not Z_NULL and the respective field is not + present in the header, then that field is set to Z_NULL to signal its + absence. This allows the use of deflateSetHeader() with the returned + structure to duplicate the header. However if those fields are set to + allocated memory, then the application will need to save those pointers + elsewhere so that they can be eventually freed. + + If inflateGetHeader is not used, then the header information is simply + discarded. The header is always checked for validity, including the header + CRC if present. inflateReset() will reset the process to discard the header + information. The application would need to call inflateGetHeader() again to + retrieve the header from the next gzip stream. + + inflateGetHeader returns Z_OK if success, or Z_STREAM_ERROR if the source + stream state was inconsistent. +*/ + +/* +ZEXTERN int ZEXPORT inflateBackInit OF((z_streamp strm, int windowBits, + unsigned char FAR *window)); + + Initialize the internal stream state for decompression using inflateBack() + calls. The fields zalloc, zfree and opaque in strm must be initialized + before the call. If zalloc and zfree are Z_NULL, then the default library- + derived memory allocation routines are used. windowBits is the base two + logarithm of the window size, in the range 8..15. window is a caller + supplied buffer of that size. Except for special applications where it is + assured that deflate was used with small window sizes, windowBits must be 15 + and a 32K byte window must be supplied to be able to decompress general + deflate streams. + + See inflateBack() for the usage of these routines. + + inflateBackInit will return Z_OK on success, Z_STREAM_ERROR if any of + the parameters are invalid, Z_MEM_ERROR if the internal state could not be + allocated, or Z_VERSION_ERROR if the version of the library does not match + the version of the header file. +*/ + +typedef unsigned (*in_func) OF((void FAR *, + z_const unsigned char FAR * FAR *)); +typedef int (*out_func) OF((void FAR *, unsigned char FAR *, unsigned)); + +ZEXTERN int ZEXPORT inflateBack OF((z_streamp strm, + in_func in, void FAR *in_desc, + out_func out, void FAR *out_desc)); +/* + inflateBack() does a raw inflate with a single call using a call-back + interface for input and output. This is potentially more efficient than + inflate() for file i/o applications, in that it avoids copying between the + output and the sliding window by simply making the window itself the output + buffer. inflate() can be faster on modern CPUs when used with large + buffers. inflateBack() trusts the application to not change the output + buffer passed by the output function, at least until inflateBack() returns. + + inflateBackInit() must be called first to allocate the internal state + and to initialize the state with the user-provided window buffer. + inflateBack() may then be used multiple times to inflate a complete, raw + deflate stream with each call. inflateBackEnd() is then called to free the + allocated state. + + A raw deflate stream is one with no zlib or gzip header or trailer. + This routine would normally be used in a utility that reads zip or gzip + files and writes out uncompressed files. The utility would decode the + header and process the trailer on its own, hence this routine expects only + the raw deflate stream to decompress. This is different from the normal + behavior of inflate(), which expects either a zlib or gzip header and + trailer around the deflate stream. + + inflateBack() uses two subroutines supplied by the caller that are then + called by inflateBack() for input and output. inflateBack() calls those + routines until it reads a complete deflate stream and writes out all of the + uncompressed data, or until it encounters an error. The function's + parameters and return types are defined above in the in_func and out_func + typedefs. inflateBack() will call in(in_desc, &buf) which should return the + number of bytes of provided input, and a pointer to that input in buf. If + there is no input available, in() must return zero--buf is ignored in that + case--and inflateBack() will return a buffer error. inflateBack() will call + out(out_desc, buf, len) to write the uncompressed data buf[0..len-1]. out() + should return zero on success, or non-zero on failure. If out() returns + non-zero, inflateBack() will return with an error. Neither in() nor out() + are permitted to change the contents of the window provided to + inflateBackInit(), which is also the buffer that out() uses to write from. + The length written by out() will be at most the window size. Any non-zero + amount of input may be provided by in(). + + For convenience, inflateBack() can be provided input on the first call by + setting strm->next_in and strm->avail_in. If that input is exhausted, then + in() will be called. Therefore strm->next_in must be initialized before + calling inflateBack(). If strm->next_in is Z_NULL, then in() will be called + immediately for input. If strm->next_in is not Z_NULL, then strm->avail_in + must also be initialized, and then if strm->avail_in is not zero, input will + initially be taken from strm->next_in[0 .. strm->avail_in - 1]. + + The in_desc and out_desc parameters of inflateBack() is passed as the + first parameter of in() and out() respectively when they are called. These + descriptors can be optionally used to pass any information that the caller- + supplied in() and out() functions need to do their job. + + On return, inflateBack() will set strm->next_in and strm->avail_in to + pass back any unused input that was provided by the last in() call. The + return values of inflateBack() can be Z_STREAM_END on success, Z_BUF_ERROR + if in() or out() returned an error, Z_DATA_ERROR if there was a format error + in the deflate stream (in which case strm->msg is set to indicate the nature + of the error), or Z_STREAM_ERROR if the stream was not properly initialized. + In the case of Z_BUF_ERROR, an input or output error can be distinguished + using strm->next_in which will be Z_NULL only if in() returned an error. If + strm->next_in is not Z_NULL, then the Z_BUF_ERROR was due to out() returning + non-zero. (in() will always be called before out(), so strm->next_in is + assured to be defined if out() returns non-zero.) Note that inflateBack() + cannot return Z_OK. +*/ + +ZEXTERN int ZEXPORT inflateBackEnd OF((z_streamp strm)); +/* + All memory allocated by inflateBackInit() is freed. + + inflateBackEnd() returns Z_OK on success, or Z_STREAM_ERROR if the stream + state was inconsistent. +*/ + +ZEXTERN uLong ZEXPORT zlibCompileFlags OF((void)); +/* Return flags indicating compile-time options. + + Type sizes, two bits each, 00 = 16 bits, 01 = 32, 10 = 64, 11 = other: + 1.0: size of uInt + 3.2: size of uLong + 5.4: size of voidpf (pointer) + 7.6: size of z_off_t + + Compiler, assembler, and debug options: + 8: DEBUG + 9: ASMV or ASMINF -- use ASM code + 10: ZLIB_WINAPI -- exported functions use the WINAPI calling convention + 11: 0 (reserved) + + One-time table building (smaller code, but not thread-safe if true): + 12: BUILDFIXED -- build static block decoding tables when needed + 13: DYNAMIC_CRC_TABLE -- build CRC calculation tables when needed + 14,15: 0 (reserved) + + Library content (indicates missing functionality): + 16: NO_GZCOMPRESS -- gz* functions cannot compress (to avoid linking + deflate code when not needed) + 17: NO_GZIP -- deflate can't write gzip streams, and inflate can't detect + and decode gzip streams (to avoid linking crc code) + 18-19: 0 (reserved) + + Operation variations (changes in library functionality): + 20: PKZIP_BUG_WORKAROUND -- slightly more permissive inflate + 21: FASTEST -- deflate algorithm with only one, lowest compression level + 22,23: 0 (reserved) + + The sprintf variant used by gzprintf (zero is best): + 24: 0 = vs*, 1 = s* -- 1 means limited to 20 arguments after the format + 25: 0 = *nprintf, 1 = *printf -- 1 means gzprintf() not secure! + 26: 0 = returns value, 1 = void -- 1 means inferred string length returned + + Remainder: + 27-31: 0 (reserved) + */ + +#ifndef Z_SOLO + + /* utility functions */ + +/* + The following utility functions are implemented on top of the basic + stream-oriented functions. To simplify the interface, some default options + are assumed (compression level and memory usage, standard memory allocation + functions). The source code of these utility functions can be modified if + you need special options. +*/ + +ZEXTERN int ZEXPORT compress OF((Bytef *dest, uLongf *destLen, + const Bytef *source, uLong sourceLen)); +/* + Compresses the source buffer into the destination buffer. sourceLen is + the byte length of the source buffer. Upon entry, destLen is the total size + of the destination buffer, which must be at least the value returned by + compressBound(sourceLen). Upon exit, destLen is the actual size of the + compressed buffer. + + compress returns Z_OK if success, Z_MEM_ERROR if there was not + enough memory, Z_BUF_ERROR if there was not enough room in the output + buffer. +*/ + +ZEXTERN int ZEXPORT compress2 OF((Bytef *dest, uLongf *destLen, + const Bytef *source, uLong sourceLen, + int level)); +/* + Compresses the source buffer into the destination buffer. The level + parameter has the same meaning as in deflateInit. sourceLen is the byte + length of the source buffer. Upon entry, destLen is the total size of the + destination buffer, which must be at least the value returned by + compressBound(sourceLen). Upon exit, destLen is the actual size of the + compressed buffer. + + compress2 returns Z_OK if success, Z_MEM_ERROR if there was not enough + memory, Z_BUF_ERROR if there was not enough room in the output buffer, + Z_STREAM_ERROR if the level parameter is invalid. +*/ + +ZEXTERN uLong ZEXPORT compressBound OF((uLong sourceLen)); +/* + compressBound() returns an upper bound on the compressed size after + compress() or compress2() on sourceLen bytes. It would be used before a + compress() or compress2() call to allocate the destination buffer. +*/ + +ZEXTERN int ZEXPORT uncompress OF((Bytef *dest, uLongf *destLen, + const Bytef *source, uLong sourceLen)); +/* + Decompresses the source buffer into the destination buffer. sourceLen is + the byte length of the source buffer. Upon entry, destLen is the total size + of the destination buffer, which must be large enough to hold the entire + uncompressed data. (The size of the uncompressed data must have been saved + previously by the compressor and transmitted to the decompressor by some + mechanism outside the scope of this compression library.) Upon exit, destLen + is the actual size of the uncompressed buffer. + + uncompress returns Z_OK if success, Z_MEM_ERROR if there was not + enough memory, Z_BUF_ERROR if there was not enough room in the output + buffer, or Z_DATA_ERROR if the input data was corrupted or incomplete. In + the case where there is not enough room, uncompress() will fill the output + buffer with the uncompressed data up to that point. +*/ + + /* gzip file access functions */ + +/* + This library supports reading and writing files in gzip (.gz) format with + an interface similar to that of stdio, using the functions that start with + "gz". The gzip format is different from the zlib format. gzip is a gzip + wrapper, documented in RFC 1952, wrapped around a deflate stream. +*/ + +typedef struct gzFile_s *gzFile; /* semi-opaque gzip file descriptor */ + +/* +ZEXTERN gzFile ZEXPORT gzopen OF((const char *path, const char *mode)); + + Opens a gzip (.gz) file for reading or writing. The mode parameter is as + in fopen ("rb" or "wb") but can also include a compression level ("wb9") or + a strategy: 'f' for filtered data as in "wb6f", 'h' for Huffman-only + compression as in "wb1h", 'R' for run-length encoding as in "wb1R", or 'F' + for fixed code compression as in "wb9F". (See the description of + deflateInit2 for more information about the strategy parameter.) 'T' will + request transparent writing or appending with no compression and not using + the gzip format. + + "a" can be used instead of "w" to request that the gzip stream that will + be written be appended to the file. "+" will result in an error, since + reading and writing to the same gzip file is not supported. The addition of + "x" when writing will create the file exclusively, which fails if the file + already exists. On systems that support it, the addition of "e" when + reading or writing will set the flag to close the file on an execve() call. + + These functions, as well as gzip, will read and decode a sequence of gzip + streams in a file. The append function of gzopen() can be used to create + such a file. (Also see gzflush() for another way to do this.) When + appending, gzopen does not test whether the file begins with a gzip stream, + nor does it look for the end of the gzip streams to begin appending. gzopen + will simply append a gzip stream to the existing file. + + gzopen can be used to read a file which is not in gzip format; in this + case gzread will directly read from the file without decompression. When + reading, this will be detected automatically by looking for the magic two- + byte gzip header. + + gzopen returns NULL if the file could not be opened, if there was + insufficient memory to allocate the gzFile state, or if an invalid mode was + specified (an 'r', 'w', or 'a' was not provided, or '+' was provided). + errno can be checked to determine if the reason gzopen failed was that the + file could not be opened. +*/ + +ZEXTERN gzFile ZEXPORT gzdopen OF((int fd, const char *mode)); +/* + gzdopen associates a gzFile with the file descriptor fd. File descriptors + are obtained from calls like open, dup, creat, pipe or fileno (if the file + has been previously opened with fopen). The mode parameter is as in gzopen. + + The next call of gzclose on the returned gzFile will also close the file + descriptor fd, just like fclose(fdopen(fd, mode)) closes the file descriptor + fd. If you want to keep fd open, use fd = dup(fd_keep); gz = gzdopen(fd, + mode);. The duplicated descriptor should be saved to avoid a leak, since + gzdopen does not close fd if it fails. If you are using fileno() to get the + file descriptor from a FILE *, then you will have to use dup() to avoid + double-close()ing the file descriptor. Both gzclose() and fclose() will + close the associated file descriptor, so they need to have different file + descriptors. + + gzdopen returns NULL if there was insufficient memory to allocate the + gzFile state, if an invalid mode was specified (an 'r', 'w', or 'a' was not + provided, or '+' was provided), or if fd is -1. The file descriptor is not + used until the next gz* read, write, seek, or close operation, so gzdopen + will not detect if fd is invalid (unless fd is -1). +*/ + +ZEXTERN int ZEXPORT gzbuffer OF((gzFile file, unsigned size)); +/* + Set the internal buffer size used by this library's functions. The + default buffer size is 8192 bytes. This function must be called after + gzopen() or gzdopen(), and before any other calls that read or write the + file. The buffer memory allocation is always deferred to the first read or + write. Two buffers are allocated, either both of the specified size when + writing, or one of the specified size and the other twice that size when + reading. A larger buffer size of, for example, 64K or 128K bytes will + noticeably increase the speed of decompression (reading). + + The new buffer size also affects the maximum length for gzprintf(). + + gzbuffer() returns 0 on success, or -1 on failure, such as being called + too late. +*/ + +ZEXTERN int ZEXPORT gzsetparams OF((gzFile file, int level, int strategy)); +/* + Dynamically update the compression level or strategy. See the description + of deflateInit2 for the meaning of these parameters. + + gzsetparams returns Z_OK if success, or Z_STREAM_ERROR if the file was not + opened for writing. +*/ + +ZEXTERN int ZEXPORT gzread OF((gzFile file, voidp buf, unsigned len)); +/* + Reads the given number of uncompressed bytes from the compressed file. If + the input file is not in gzip format, gzread copies the given number of + bytes into the buffer directly from the file. + + After reaching the end of a gzip stream in the input, gzread will continue + to read, looking for another gzip stream. Any number of gzip streams may be + concatenated in the input file, and will all be decompressed by gzread(). + If something other than a gzip stream is encountered after a gzip stream, + that remaining trailing garbage is ignored (and no error is returned). + + gzread can be used to read a gzip file that is being concurrently written. + Upon reaching the end of the input, gzread will return with the available + data. If the error code returned by gzerror is Z_OK or Z_BUF_ERROR, then + gzclearerr can be used to clear the end of file indicator in order to permit + gzread to be tried again. Z_OK indicates that a gzip stream was completed + on the last gzread. Z_BUF_ERROR indicates that the input file ended in the + middle of a gzip stream. Note that gzread does not return -1 in the event + of an incomplete gzip stream. This error is deferred until gzclose(), which + will return Z_BUF_ERROR if the last gzread ended in the middle of a gzip + stream. Alternatively, gzerror can be used before gzclose to detect this + case. + + gzread returns the number of uncompressed bytes actually read, less than + len for end of file, or -1 for error. +*/ + +ZEXTERN int ZEXPORT gzwrite OF((gzFile file, + voidpc buf, unsigned len)); +/* + Writes the given number of uncompressed bytes into the compressed file. + gzwrite returns the number of uncompressed bytes written or 0 in case of + error. +*/ + +ZEXTERN int ZEXPORTVA gzprintf Z_ARG((gzFile file, const char *format, ...)); +/* + Converts, formats, and writes the arguments to the compressed file under + control of the format string, as in fprintf. gzprintf returns the number of + uncompressed bytes actually written, or 0 in case of error. The number of + uncompressed bytes written is limited to 8191, or one less than the buffer + size given to gzbuffer(). The caller should assure that this limit is not + exceeded. If it is exceeded, then gzprintf() will return an error (0) with + nothing written. In this case, there may also be a buffer overflow with + unpredictable consequences, which is possible only if zlib was compiled with + the insecure functions sprintf() or vsprintf() because the secure snprintf() + or vsnprintf() functions were not available. This can be determined using + zlibCompileFlags(). +*/ + +ZEXTERN int ZEXPORT gzputs OF((gzFile file, const char *s)); +/* + Writes the given null-terminated string to the compressed file, excluding + the terminating null character. + + gzputs returns the number of characters written, or -1 in case of error. +*/ + +ZEXTERN char * ZEXPORT gzgets OF((gzFile file, char *buf, int len)); +/* + Reads bytes from the compressed file until len-1 characters are read, or a + newline character is read and transferred to buf, or an end-of-file + condition is encountered. If any characters are read or if len == 1, the + string is terminated with a null character. If no characters are read due + to an end-of-file or len < 1, then the buffer is left untouched. + + gzgets returns buf which is a null-terminated string, or it returns NULL + for end-of-file or in case of error. If there was an error, the contents at + buf are indeterminate. +*/ + +ZEXTERN int ZEXPORT gzputc OF((gzFile file, int c)); +/* + Writes c, converted to an unsigned char, into the compressed file. gzputc + returns the value that was written, or -1 in case of error. +*/ + +ZEXTERN int ZEXPORT gzgetc OF((gzFile file)); +/* + Reads one byte from the compressed file. gzgetc returns this byte or -1 + in case of end of file or error. This is implemented as a macro for speed. + As such, it does not do all of the checking the other functions do. I.e. + it does not check to see if file is NULL, nor whether the structure file + points to has been clobbered or not. +*/ + +ZEXTERN int ZEXPORT gzungetc OF((int c, gzFile file)); +/* + Push one character back onto the stream to be read as the first character + on the next read. At least one character of push-back is allowed. + gzungetc() returns the character pushed, or -1 on failure. gzungetc() will + fail if c is -1, and may fail if a character has been pushed but not read + yet. If gzungetc is used immediately after gzopen or gzdopen, at least the + output buffer size of pushed characters is allowed. (See gzbuffer above.) + The pushed character will be discarded if the stream is repositioned with + gzseek() or gzrewind(). +*/ + +ZEXTERN int ZEXPORT gzflush OF((gzFile file, int flush)); +/* + Flushes all pending output into the compressed file. The parameter flush + is as in the deflate() function. The return value is the zlib error number + (see function gzerror below). gzflush is only permitted when writing. + + If the flush parameter is Z_FINISH, the remaining data is written and the + gzip stream is completed in the output. If gzwrite() is called again, a new + gzip stream will be started in the output. gzread() is able to read such + concatented gzip streams. + + gzflush should be called only when strictly necessary because it will + degrade compression if called too often. +*/ + +/* +ZEXTERN z_off_t ZEXPORT gzseek OF((gzFile file, + z_off_t offset, int whence)); + + Sets the starting position for the next gzread or gzwrite on the given + compressed file. The offset represents a number of bytes in the + uncompressed data stream. The whence parameter is defined as in lseek(2); + the value SEEK_END is not supported. + + If the file is opened for reading, this function is emulated but can be + extremely slow. If the file is opened for writing, only forward seeks are + supported; gzseek then compresses a sequence of zeroes up to the new + starting position. + + gzseek returns the resulting offset location as measured in bytes from + the beginning of the uncompressed stream, or -1 in case of error, in + particular if the file is opened for writing and the new starting position + would be before the current position. +*/ + +ZEXTERN int ZEXPORT gzrewind OF((gzFile file)); +/* + Rewinds the given file. This function is supported only for reading. + + gzrewind(file) is equivalent to (int)gzseek(file, 0L, SEEK_SET) +*/ + +/* +ZEXTERN z_off_t ZEXPORT gztell OF((gzFile file)); + + Returns the starting position for the next gzread or gzwrite on the given + compressed file. This position represents a number of bytes in the + uncompressed data stream, and is zero when starting, even if appending or + reading a gzip stream from the middle of a file using gzdopen(). + + gztell(file) is equivalent to gzseek(file, 0L, SEEK_CUR) +*/ + +/* +ZEXTERN z_off_t ZEXPORT gzoffset OF((gzFile file)); + + Returns the current offset in the file being read or written. This offset + includes the count of bytes that precede the gzip stream, for example when + appending or when using gzdopen() for reading. When reading, the offset + does not include as yet unused buffered input. This information can be used + for a progress indicator. On error, gzoffset() returns -1. +*/ + +ZEXTERN int ZEXPORT gzeof OF((gzFile file)); +/* + Returns true (1) if the end-of-file indicator has been set while reading, + false (0) otherwise. Note that the end-of-file indicator is set only if the + read tried to go past the end of the input, but came up short. Therefore, + just like feof(), gzeof() may return false even if there is no more data to + read, in the event that the last read request was for the exact number of + bytes remaining in the input file. This will happen if the input file size + is an exact multiple of the buffer size. + + If gzeof() returns true, then the read functions will return no more data, + unless the end-of-file indicator is reset by gzclearerr() and the input file + has grown since the previous end of file was detected. +*/ + +ZEXTERN int ZEXPORT gzdirect OF((gzFile file)); +/* + Returns true (1) if file is being copied directly while reading, or false + (0) if file is a gzip stream being decompressed. + + If the input file is empty, gzdirect() will return true, since the input + does not contain a gzip stream. + + If gzdirect() is used immediately after gzopen() or gzdopen() it will + cause buffers to be allocated to allow reading the file to determine if it + is a gzip file. Therefore if gzbuffer() is used, it should be called before + gzdirect(). + + When writing, gzdirect() returns true (1) if transparent writing was + requested ("wT" for the gzopen() mode), or false (0) otherwise. (Note: + gzdirect() is not needed when writing. Transparent writing must be + explicitly requested, so the application already knows the answer. When + linking statically, using gzdirect() will include all of the zlib code for + gzip file reading and decompression, which may not be desired.) +*/ + +ZEXTERN int ZEXPORT gzclose OF((gzFile file)); +/* + Flushes all pending output if necessary, closes the compressed file and + deallocates the (de)compression state. Note that once file is closed, you + cannot call gzerror with file, since its structures have been deallocated. + gzclose must not be called more than once on the same file, just as free + must not be called more than once on the same allocation. + + gzclose will return Z_STREAM_ERROR if file is not valid, Z_ERRNO on a + file operation error, Z_MEM_ERROR if out of memory, Z_BUF_ERROR if the + last read ended in the middle of a gzip stream, or Z_OK on success. +*/ + +ZEXTERN int ZEXPORT gzclose_r OF((gzFile file)); +ZEXTERN int ZEXPORT gzclose_w OF((gzFile file)); +/* + Same as gzclose(), but gzclose_r() is only for use when reading, and + gzclose_w() is only for use when writing or appending. The advantage to + using these instead of gzclose() is that they avoid linking in zlib + compression or decompression code that is not used when only reading or only + writing respectively. If gzclose() is used, then both compression and + decompression code will be included the application when linking to a static + zlib library. +*/ + +ZEXTERN const char * ZEXPORT gzerror OF((gzFile file, int *errnum)); +/* + Returns the error message for the last error which occurred on the given + compressed file. errnum is set to zlib error number. If an error occurred + in the file system and not in the compression library, errnum is set to + Z_ERRNO and the application may consult errno to get the exact error code. + + The application must not modify the returned string. Future calls to + this function may invalidate the previously returned string. If file is + closed, then the string previously returned by gzerror will no longer be + available. + + gzerror() should be used to distinguish errors from end-of-file for those + functions above that do not distinguish those cases in their return values. +*/ + +ZEXTERN void ZEXPORT gzclearerr OF((gzFile file)); +/* + Clears the error and end-of-file flags for file. This is analogous to the + clearerr() function in stdio. This is useful for continuing to read a gzip + file that is being written concurrently. +*/ + +#endif /* !Z_SOLO */ + + /* checksum functions */ + +/* + These functions are not related to compression but are exported + anyway because they might be useful in applications using the compression + library. +*/ + +ZEXTERN uLong ZEXPORT adler32 OF((uLong adler, const Bytef *buf, uInt len)); +/* + Update a running Adler-32 checksum with the bytes buf[0..len-1] and + return the updated checksum. If buf is Z_NULL, this function returns the + required initial value for the checksum. + + An Adler-32 checksum is almost as reliable as a CRC32 but can be computed + much faster. + + Usage example: + + uLong adler = adler32(0L, Z_NULL, 0); + + while (read_buffer(buffer, length) != EOF) { + adler = adler32(adler, buffer, length); + } + if (adler != original_adler) error(); +*/ + +/* +ZEXTERN uLong ZEXPORT adler32_combine OF((uLong adler1, uLong adler2, + z_off_t len2)); + + Combine two Adler-32 checksums into one. For two sequences of bytes, seq1 + and seq2 with lengths len1 and len2, Adler-32 checksums were calculated for + each, adler1 and adler2. adler32_combine() returns the Adler-32 checksum of + seq1 and seq2 concatenated, requiring only adler1, adler2, and len2. Note + that the z_off_t type (like off_t) is a signed integer. If len2 is + negative, the result has no meaning or utility. +*/ + +ZEXTERN uLong ZEXPORT crc32 OF((uLong crc, const Bytef *buf, uInt len)); +/* + Update a running CRC-32 with the bytes buf[0..len-1] and return the + updated CRC-32. If buf is Z_NULL, this function returns the required + initial value for the crc. Pre- and post-conditioning (one's complement) is + performed within this function so it shouldn't be done by the application. + + Usage example: + + uLong crc = crc32(0L, Z_NULL, 0); + + while (read_buffer(buffer, length) != EOF) { + crc = crc32(crc, buffer, length); + } + if (crc != original_crc) error(); +*/ + +/* +ZEXTERN uLong ZEXPORT crc32_combine OF((uLong crc1, uLong crc2, z_off_t len2)); + + Combine two CRC-32 check values into one. For two sequences of bytes, + seq1 and seq2 with lengths len1 and len2, CRC-32 check values were + calculated for each, crc1 and crc2. crc32_combine() returns the CRC-32 + check value of seq1 and seq2 concatenated, requiring only crc1, crc2, and + len2. +*/ + + + /* various hacks, don't look :) */ + +/* deflateInit and inflateInit are macros to allow checking the zlib version + * and the compiler's view of z_stream: + */ +ZEXTERN int ZEXPORT deflateInit_ OF((z_streamp strm, int level, + const char *version, int stream_size)); +ZEXTERN int ZEXPORT inflateInit_ OF((z_streamp strm, + const char *version, int stream_size)); +ZEXTERN int ZEXPORT deflateInit2_ OF((z_streamp strm, int level, int method, + int windowBits, int memLevel, + int strategy, const char *version, + int stream_size)); +ZEXTERN int ZEXPORT inflateInit2_ OF((z_streamp strm, int windowBits, + const char *version, int stream_size)); +ZEXTERN int ZEXPORT inflateBackInit_ OF((z_streamp strm, int windowBits, + unsigned char FAR *window, + const char *version, + int stream_size)); +#define deflateInit(strm, level) \ + deflateInit_((strm), (level), ZLIB_VERSION, (int)sizeof(z_stream)) +#define inflateInit(strm) \ + inflateInit_((strm), ZLIB_VERSION, (int)sizeof(z_stream)) +#define deflateInit2(strm, level, method, windowBits, memLevel, strategy) \ + deflateInit2_((strm),(level),(method),(windowBits),(memLevel),\ + (strategy), ZLIB_VERSION, (int)sizeof(z_stream)) +#define inflateInit2(strm, windowBits) \ + inflateInit2_((strm), (windowBits), ZLIB_VERSION, \ + (int)sizeof(z_stream)) +#define inflateBackInit(strm, windowBits, window) \ + inflateBackInit_((strm), (windowBits), (window), \ + ZLIB_VERSION, (int)sizeof(z_stream)) + +#ifndef Z_SOLO + +/* gzgetc() macro and its supporting function and exposed data structure. Note + * that the real internal state is much larger than the exposed structure. + * This abbreviated structure exposes just enough for the gzgetc() macro. The + * user should not mess with these exposed elements, since their names or + * behavior could change in the future, perhaps even capriciously. They can + * only be used by the gzgetc() macro. You have been warned. + */ +struct gzFile_s { + unsigned have; + unsigned char *next; + z_off64_t pos; +}; +ZEXTERN int ZEXPORT gzgetc_ OF((gzFile file)); /* backward compatibility */ +#ifdef Z_PREFIX_SET +# undef z_gzgetc +# define z_gzgetc(g) \ + ((g)->have ? ((g)->have--, (g)->pos++, *((g)->next)++) : gzgetc(g)) +#else +# define gzgetc(g) \ + ((g)->have ? ((g)->have--, (g)->pos++, *((g)->next)++) : gzgetc(g)) +#endif + +/* provide 64-bit offset functions if _LARGEFILE64_SOURCE defined, and/or + * change the regular functions to 64 bits if _FILE_OFFSET_BITS is 64 (if + * both are true, the application gets the *64 functions, and the regular + * functions are changed to 64 bits) -- in case these are set on systems + * without large file support, _LFS64_LARGEFILE must also be true + */ +#ifdef Z_LARGE64 + ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *)); + ZEXTERN z_off64_t ZEXPORT gzseek64 OF((gzFile, z_off64_t, int)); + ZEXTERN z_off64_t ZEXPORT gztell64 OF((gzFile)); + ZEXTERN z_off64_t ZEXPORT gzoffset64 OF((gzFile)); + ZEXTERN uLong ZEXPORT adler32_combine64 OF((uLong, uLong, z_off64_t)); + ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, z_off64_t)); +#endif + +#if !defined(ZLIB_INTERNAL) && defined(Z_WANT64) +# ifdef Z_PREFIX_SET +# define z_gzopen z_gzopen64 +# define z_gzseek z_gzseek64 +# define z_gztell z_gztell64 +# define z_gzoffset z_gzoffset64 +# define z_adler32_combine z_adler32_combine64 +# define z_crc32_combine z_crc32_combine64 +# else +# define gzopen gzopen64 +# define gzseek gzseek64 +# define gztell gztell64 +# define gzoffset gzoffset64 +# define adler32_combine adler32_combine64 +# define crc32_combine crc32_combine64 +# endif +# ifndef Z_LARGE64 + ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *)); + ZEXTERN z_off_t ZEXPORT gzseek64 OF((gzFile, z_off_t, int)); + ZEXTERN z_off_t ZEXPORT gztell64 OF((gzFile)); + ZEXTERN z_off_t ZEXPORT gzoffset64 OF((gzFile)); + ZEXTERN uLong ZEXPORT adler32_combine64 OF((uLong, uLong, z_off_t)); + ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, z_off_t)); +# endif +#else + ZEXTERN gzFile ZEXPORT gzopen OF((const char *, const char *)); + ZEXTERN z_off_t ZEXPORT gzseek OF((gzFile, z_off_t, int)); + ZEXTERN z_off_t ZEXPORT gztell OF((gzFile)); + ZEXTERN z_off_t ZEXPORT gzoffset OF((gzFile)); + ZEXTERN uLong ZEXPORT adler32_combine OF((uLong, uLong, z_off_t)); + ZEXTERN uLong ZEXPORT crc32_combine OF((uLong, uLong, z_off_t)); +#endif + +#else /* Z_SOLO */ + + ZEXTERN uLong ZEXPORT adler32_combine OF((uLong, uLong, z_off_t)); + ZEXTERN uLong ZEXPORT crc32_combine OF((uLong, uLong, z_off_t)); + +#endif /* !Z_SOLO */ + +/* hack for buggy compilers */ +#if !defined(ZUTIL_H) && !defined(NO_DUMMY_DECL) + struct internal_state {int dummy;}; +#endif + +/* undocumented functions */ +ZEXTERN const char * ZEXPORT zError OF((int)); +ZEXTERN int ZEXPORT inflateSyncPoint OF((z_streamp)); +ZEXTERN const z_crc_t FAR * ZEXPORT get_crc_table OF((void)); +ZEXTERN int ZEXPORT inflateUndermine OF((z_streamp, int)); +ZEXTERN int ZEXPORT inflateResetKeep OF((z_streamp)); +ZEXTERN int ZEXPORT deflateResetKeep OF((z_streamp)); +#if defined(_WIN32) && !defined(Z_SOLO) +ZEXTERN gzFile ZEXPORT gzopen_w OF((const wchar_t *path, + const char *mode)); +#endif +#if defined(STDC) || defined(Z_HAVE_STDARG_H) +# ifndef Z_SOLO +ZEXTERN int ZEXPORTVA gzvprintf Z_ARG((gzFile file, + const char *format, + va_list va)); +# endif +#endif + +#ifdef __cplusplus +} +#endif + +#endif /* ZLIB_H */ diff --git a/software/scsi2sd-util/zlib-1.2.8/zlib.map b/software/scsi2sd-util/zlib-1.2.8/zlib.map new file mode 100644 index 0000000..55c6647 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/zlib.map @@ -0,0 +1,83 @@ +ZLIB_1.2.0 { + global: + compressBound; + deflateBound; + inflateBack; + inflateBackEnd; + inflateBackInit_; + inflateCopy; + local: + deflate_copyright; + inflate_copyright; + inflate_fast; + inflate_table; + zcalloc; + zcfree; + z_errmsg; + gz_error; + gz_intmax; + _*; +}; + +ZLIB_1.2.0.2 { + gzclearerr; + gzungetc; + zlibCompileFlags; +} ZLIB_1.2.0; + +ZLIB_1.2.0.8 { + deflatePrime; +} ZLIB_1.2.0.2; + +ZLIB_1.2.2 { + adler32_combine; + crc32_combine; + deflateSetHeader; + inflateGetHeader; +} ZLIB_1.2.0.8; + +ZLIB_1.2.2.3 { + deflateTune; + gzdirect; +} ZLIB_1.2.2; + +ZLIB_1.2.2.4 { + inflatePrime; +} ZLIB_1.2.2.3; + +ZLIB_1.2.3.3 { + adler32_combine64; + crc32_combine64; + gzopen64; + gzseek64; + gztell64; + inflateUndermine; +} ZLIB_1.2.2.4; + +ZLIB_1.2.3.4 { + inflateReset2; + inflateMark; +} ZLIB_1.2.3.3; + +ZLIB_1.2.3.5 { + gzbuffer; + gzoffset; + gzoffset64; + gzclose_r; + gzclose_w; +} ZLIB_1.2.3.4; + +ZLIB_1.2.5.1 { + deflatePending; +} ZLIB_1.2.3.5; + +ZLIB_1.2.5.2 { + deflateResetKeep; + gzgetc_; + inflateResetKeep; +} ZLIB_1.2.5.1; + +ZLIB_1.2.7.1 { + inflateGetDictionary; + gzvprintf; +} ZLIB_1.2.5.2; diff --git a/software/scsi2sd-util/zlib-1.2.8/zlib.pc.cmakein b/software/scsi2sd-util/zlib-1.2.8/zlib.pc.cmakein new file mode 100644 index 0000000..a5e6429 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/zlib.pc.cmakein @@ -0,0 +1,13 @@ +prefix=@CMAKE_INSTALL_PREFIX@ +exec_prefix=@CMAKE_INSTALL_PREFIX@ +libdir=@INSTALL_LIB_DIR@ +sharedlibdir=@INSTALL_LIB_DIR@ +includedir=@INSTALL_INC_DIR@ + +Name: zlib +Description: zlib compression library +Version: @VERSION@ + +Requires: +Libs: -L${libdir} -L${sharedlibdir} -lz +Cflags: -I${includedir} diff --git a/software/scsi2sd-util/zlib-1.2.8/zlib.pc.in b/software/scsi2sd-util/zlib-1.2.8/zlib.pc.in new file mode 100644 index 0000000..7e5acf9 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/zlib.pc.in @@ -0,0 +1,13 @@ +prefix=@prefix@ +exec_prefix=@exec_prefix@ +libdir=@libdir@ +sharedlibdir=@sharedlibdir@ +includedir=@includedir@ + +Name: zlib +Description: zlib compression library +Version: @VERSION@ + +Requires: +Libs: -L${libdir} -L${sharedlibdir} -lz +Cflags: -I${includedir} diff --git a/software/scsi2sd-util/zlib-1.2.8/zlib2ansi b/software/scsi2sd-util/zlib-1.2.8/zlib2ansi new file mode 100755 index 0000000..15e3e16 --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/zlib2ansi @@ -0,0 +1,152 @@ +#!/usr/bin/perl + +# Transform K&R C function definitions into ANSI equivalent. +# +# Author: Paul Marquess +# Version: 1.0 +# Date: 3 October 2006 + +# TODO +# +# Asumes no function pointer parameters. unless they are typedefed. +# Assumes no literal strings that look like function definitions +# Assumes functions start at the beginning of a line + +use strict; +use warnings; + +local $/; +$_ = <>; + +my $sp = qr{ \s* (?: /\* .*? \*/ )? \s* }x; # assume no nested comments + +my $d1 = qr{ $sp (?: [\w\*\s]+ $sp)* $sp \w+ $sp [\[\]\s]* $sp }x ; +my $decl = qr{ $sp (?: \w+ $sp )+ $d1 }xo ; +my $dList = qr{ $sp $decl (?: $sp , $d1 )* $sp ; $sp }xo ; + + +while (s/^ + ( # Start $1 + ( # Start $2 + .*? # Minimal eat content + ( ^ \w [\w\s\*]+ ) # $3 -- function name + \s* # optional whitespace + ) # $2 - Matched up to before parameter list + + \( \s* # Literal "(" + optional whitespace + ( [^\)]+ ) # $4 - one or more anythings except ")" + \s* \) # optional whitespace surrounding a Literal ")" + + ( (?: $dList )+ ) # $5 + + $sp ^ { # literal "{" at start of line + ) # Remember to $1 + //xsom + ) +{ + my $all = $1 ; + my $prefix = $2; + my $param_list = $4 ; + my $params = $5; + + StripComments($params); + StripComments($param_list); + $param_list =~ s/^\s+//; + $param_list =~ s/\s+$//; + + my $i = 0 ; + my %pList = map { $_ => $i++ } + split /\s*,\s*/, $param_list; + my $pMatch = '(\b' . join('|', keys %pList) . '\b)\W*$' ; + + my @params = split /\s*;\s*/, $params; + my @outParams = (); + foreach my $p (@params) + { + if ($p =~ /,/) + { + my @bits = split /\s*,\s*/, $p; + my $first = shift @bits; + $first =~ s/^\s*//; + push @outParams, $first; + $first =~ /^(\w+\s*)/; + my $type = $1 ; + push @outParams, map { $type . $_ } @bits; + } + else + { + $p =~ s/^\s+//; + push @outParams, $p; + } + } + + + my %tmp = map { /$pMatch/; $_ => $pList{$1} } + @outParams ; + + @outParams = map { " $_" } + sort { $tmp{$a} <=> $tmp{$b} } + @outParams ; + + print $prefix ; + print "(\n" . join(",\n", @outParams) . ")\n"; + print "{" ; + +} + +# Output any trailing code. +print ; +exit 0; + + +sub StripComments +{ + + no warnings; + + # Strip C & C++ coments + # From the perlfaq + $_[0] =~ + + s{ + /\* ## Start of /* ... */ comment + [^*]*\*+ ## Non-* followed by 1-or-more *'s + ( + [^/*][^*]*\*+ + )* ## 0-or-more things which don't start with / + ## but do end with '*' + / ## End of /* ... */ comment + + | ## OR C++ Comment + // ## Start of C++ comment // + [^\n]* ## followed by 0-or-more non end of line characters + + | ## OR various things which aren't comments: + + ( + " ## Start of " ... " string + ( + \\. ## Escaped char + | ## OR + [^"\\] ## Non "\ + )* + " ## End of " ... " string + + | ## OR + + ' ## Start of ' ... ' string + ( + \\. ## Escaped char + | ## OR + [^'\\] ## Non '\ + )* + ' ## End of ' ... ' string + + | ## OR + + . ## Anything other char + [^/"'\\]* ## Chars which doesn't start a comment, string or escape + ) + }{$2}gxs; + +} diff --git a/software/scsi2sd-util/zlib-1.2.8/zutil.c b/software/scsi2sd-util/zlib-1.2.8/zutil.c new file mode 100644 index 0000000..23d2ebe --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/zutil.c @@ -0,0 +1,324 @@ +/* zutil.c -- target dependent utility functions for the compression library + * Copyright (C) 1995-2005, 2010, 2011, 2012 Jean-loup Gailly. + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* @(#) $Id$ */ + +#include "zutil.h" +#ifndef Z_SOLO +# include "gzguts.h" +#endif + +#ifndef NO_DUMMY_DECL +struct internal_state {int dummy;}; /* for buggy compilers */ +#endif + +z_const char * const z_errmsg[10] = { +"need dictionary", /* Z_NEED_DICT 2 */ +"stream end", /* Z_STREAM_END 1 */ +"", /* Z_OK 0 */ +"file error", /* Z_ERRNO (-1) */ +"stream error", /* Z_STREAM_ERROR (-2) */ +"data error", /* Z_DATA_ERROR (-3) */ +"insufficient memory", /* Z_MEM_ERROR (-4) */ +"buffer error", /* Z_BUF_ERROR (-5) */ +"incompatible version",/* Z_VERSION_ERROR (-6) */ +""}; + + +const char * ZEXPORT zlibVersion() +{ + return ZLIB_VERSION; +} + +uLong ZEXPORT zlibCompileFlags() +{ + uLong flags; + + flags = 0; + switch ((int)(sizeof(uInt))) { + case 2: break; + case 4: flags += 1; break; + case 8: flags += 2; break; + default: flags += 3; + } + switch ((int)(sizeof(uLong))) { + case 2: break; + case 4: flags += 1 << 2; break; + case 8: flags += 2 << 2; break; + default: flags += 3 << 2; + } + switch ((int)(sizeof(voidpf))) { + case 2: break; + case 4: flags += 1 << 4; break; + case 8: flags += 2 << 4; break; + default: flags += 3 << 4; + } + switch ((int)(sizeof(z_off_t))) { + case 2: break; + case 4: flags += 1 << 6; break; + case 8: flags += 2 << 6; break; + default: flags += 3 << 6; + } +#ifdef DEBUG + flags += 1 << 8; +#endif +#if defined(ASMV) || defined(ASMINF) + flags += 1 << 9; +#endif +#ifdef ZLIB_WINAPI + flags += 1 << 10; +#endif +#ifdef BUILDFIXED + flags += 1 << 12; +#endif +#ifdef DYNAMIC_CRC_TABLE + flags += 1 << 13; +#endif +#ifdef NO_GZCOMPRESS + flags += 1L << 16; +#endif +#ifdef NO_GZIP + flags += 1L << 17; +#endif +#ifdef PKZIP_BUG_WORKAROUND + flags += 1L << 20; +#endif +#ifdef FASTEST + flags += 1L << 21; +#endif +#if defined(STDC) || defined(Z_HAVE_STDARG_H) +# ifdef NO_vsnprintf + flags += 1L << 25; +# ifdef HAS_vsprintf_void + flags += 1L << 26; +# endif +# else +# ifdef HAS_vsnprintf_void + flags += 1L << 26; +# endif +# endif +#else + flags += 1L << 24; +# ifdef NO_snprintf + flags += 1L << 25; +# ifdef HAS_sprintf_void + flags += 1L << 26; +# endif +# else +# ifdef HAS_snprintf_void + flags += 1L << 26; +# endif +# endif +#endif + return flags; +} + +#ifdef DEBUG + +# ifndef verbose +# define verbose 0 +# endif +int ZLIB_INTERNAL z_verbose = verbose; + +void ZLIB_INTERNAL z_error (m) + char *m; +{ + fprintf(stderr, "%s\n", m); + exit(1); +} +#endif + +/* exported to allow conversion of error code to string for compress() and + * uncompress() + */ +const char * ZEXPORT zError(err) + int err; +{ + return ERR_MSG(err); +} + +#if defined(_WIN32_WCE) + /* The Microsoft C Run-Time Library for Windows CE doesn't have + * errno. We define it as a global variable to simplify porting. + * Its value is always 0 and should not be used. + */ + int errno = 0; +#endif + +#ifndef HAVE_MEMCPY + +void ZLIB_INTERNAL zmemcpy(dest, source, len) + Bytef* dest; + const Bytef* source; + uInt len; +{ + if (len == 0) return; + do { + *dest++ = *source++; /* ??? to be unrolled */ + } while (--len != 0); +} + +int ZLIB_INTERNAL zmemcmp(s1, s2, len) + const Bytef* s1; + const Bytef* s2; + uInt len; +{ + uInt j; + + for (j = 0; j < len; j++) { + if (s1[j] != s2[j]) return 2*(s1[j] > s2[j])-1; + } + return 0; +} + +void ZLIB_INTERNAL zmemzero(dest, len) + Bytef* dest; + uInt len; +{ + if (len == 0) return; + do { + *dest++ = 0; /* ??? to be unrolled */ + } while (--len != 0); +} +#endif + +#ifndef Z_SOLO + +#ifdef SYS16BIT + +#ifdef __TURBOC__ +/* Turbo C in 16-bit mode */ + +# define MY_ZCALLOC + +/* Turbo C malloc() does not allow dynamic allocation of 64K bytes + * and farmalloc(64K) returns a pointer with an offset of 8, so we + * must fix the pointer. Warning: the pointer must be put back to its + * original form in order to free it, use zcfree(). + */ + +#define MAX_PTR 10 +/* 10*64K = 640K */ + +local int next_ptr = 0; + +typedef struct ptr_table_s { + voidpf org_ptr; + voidpf new_ptr; +} ptr_table; + +local ptr_table table[MAX_PTR]; +/* This table is used to remember the original form of pointers + * to large buffers (64K). Such pointers are normalized with a zero offset. + * Since MSDOS is not a preemptive multitasking OS, this table is not + * protected from concurrent access. This hack doesn't work anyway on + * a protected system like OS/2. Use Microsoft C instead. + */ + +voidpf ZLIB_INTERNAL zcalloc (voidpf opaque, unsigned items, unsigned size) +{ + voidpf buf = opaque; /* just to make some compilers happy */ + ulg bsize = (ulg)items*size; + + /* If we allocate less than 65520 bytes, we assume that farmalloc + * will return a usable pointer which doesn't have to be normalized. + */ + if (bsize < 65520L) { + buf = farmalloc(bsize); + if (*(ush*)&buf != 0) return buf; + } else { + buf = farmalloc(bsize + 16L); + } + if (buf == NULL || next_ptr >= MAX_PTR) return NULL; + table[next_ptr].org_ptr = buf; + + /* Normalize the pointer to seg:0 */ + *((ush*)&buf+1) += ((ush)((uch*)buf-0) + 15) >> 4; + *(ush*)&buf = 0; + table[next_ptr++].new_ptr = buf; + return buf; +} + +void ZLIB_INTERNAL zcfree (voidpf opaque, voidpf ptr) +{ + int n; + if (*(ush*)&ptr != 0) { /* object < 64K */ + farfree(ptr); + return; + } + /* Find the original pointer */ + for (n = 0; n < next_ptr; n++) { + if (ptr != table[n].new_ptr) continue; + + farfree(table[n].org_ptr); + while (++n < next_ptr) { + table[n-1] = table[n]; + } + next_ptr--; + return; + } + ptr = opaque; /* just to make some compilers happy */ + Assert(0, "zcfree: ptr not found"); +} + +#endif /* __TURBOC__ */ + + +#ifdef M_I86 +/* Microsoft C in 16-bit mode */ + +# define MY_ZCALLOC + +#if (!defined(_MSC_VER) || (_MSC_VER <= 600)) +# define _halloc halloc +# define _hfree hfree +#endif + +voidpf ZLIB_INTERNAL zcalloc (voidpf opaque, uInt items, uInt size) +{ + if (opaque) opaque = 0; /* to make compiler happy */ + return _halloc((long)items, size); +} + +void ZLIB_INTERNAL zcfree (voidpf opaque, voidpf ptr) +{ + if (opaque) opaque = 0; /* to make compiler happy */ + _hfree(ptr); +} + +#endif /* M_I86 */ + +#endif /* SYS16BIT */ + + +#ifndef MY_ZCALLOC /* Any system without a special alloc function */ + +#ifndef STDC +extern voidp malloc OF((uInt size)); +extern voidp calloc OF((uInt items, uInt size)); +extern void free OF((voidpf ptr)); +#endif + +voidpf ZLIB_INTERNAL zcalloc (opaque, items, size) + voidpf opaque; + unsigned items; + unsigned size; +{ + if (opaque) items += size - size; /* make compiler happy */ + return sizeof(uInt) > 2 ? (voidpf)malloc(items * size) : + (voidpf)calloc(items, size); +} + +void ZLIB_INTERNAL zcfree (opaque, ptr) + voidpf opaque; + voidpf ptr; +{ + free(ptr); + if (opaque) return; /* make compiler happy */ +} + +#endif /* MY_ZCALLOC */ + +#endif /* !Z_SOLO */ diff --git a/software/scsi2sd-util/zlib-1.2.8/zutil.h b/software/scsi2sd-util/zlib-1.2.8/zutil.h new file mode 100644 index 0000000..24ab06b --- /dev/null +++ b/software/scsi2sd-util/zlib-1.2.8/zutil.h @@ -0,0 +1,253 @@ +/* zutil.h -- internal interface and configuration of the compression library + * Copyright (C) 1995-2013 Jean-loup Gailly. + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* WARNING: this file should *not* be used by applications. It is + part of the implementation of the compression library and is + subject to change. Applications should only use zlib.h. + */ + +/* @(#) $Id$ */ + +#ifndef ZUTIL_H +#define ZUTIL_H + +#ifdef HAVE_HIDDEN +# define ZLIB_INTERNAL __attribute__((visibility ("hidden"))) +#else +# define ZLIB_INTERNAL +#endif + +#include "zlib.h" + +#if defined(STDC) && !defined(Z_SOLO) +# if !(defined(_WIN32_WCE) && defined(_MSC_VER)) +# include +# endif +# include +# include +#endif + +#ifdef Z_SOLO + typedef long ptrdiff_t; /* guess -- will be caught if guess is wrong */ +#endif + +#ifndef local +# define local static +#endif +/* compile with -Dlocal if your debugger can't find static symbols */ + +typedef unsigned char uch; +typedef uch FAR uchf; +typedef unsigned short ush; +typedef ush FAR ushf; +typedef unsigned long ulg; + +extern z_const char * const z_errmsg[10]; /* indexed by 2-zlib_error */ +/* (size given to avoid silly warnings with Visual C++) */ + +#define ERR_MSG(err) z_errmsg[Z_NEED_DICT-(err)] + +#define ERR_RETURN(strm,err) \ + return (strm->msg = ERR_MSG(err), (err)) +/* To be used only when the state is known to be valid */ + + /* common constants */ + +#ifndef DEF_WBITS +# define DEF_WBITS MAX_WBITS +#endif +/* default windowBits for decompression. MAX_WBITS is for compression only */ + +#if MAX_MEM_LEVEL >= 8 +# define DEF_MEM_LEVEL 8 +#else +# define DEF_MEM_LEVEL MAX_MEM_LEVEL +#endif +/* default memLevel */ + +#define STORED_BLOCK 0 +#define STATIC_TREES 1 +#define DYN_TREES 2 +/* The three kinds of block type */ + +#define MIN_MATCH 3 +#define MAX_MATCH 258 +/* The minimum and maximum match lengths */ + +#define PRESET_DICT 0x20 /* preset dictionary flag in zlib header */ + + /* target dependencies */ + +#if defined(MSDOS) || (defined(WINDOWS) && !defined(WIN32)) +# define OS_CODE 0x00 +# ifndef Z_SOLO +# if defined(__TURBOC__) || defined(__BORLANDC__) +# if (__STDC__ == 1) && (defined(__LARGE__) || defined(__COMPACT__)) + /* Allow compilation with ANSI keywords only enabled */ + void _Cdecl farfree( void *block ); + void *_Cdecl farmalloc( unsigned long nbytes ); +# else +# include +# endif +# else /* MSC or DJGPP */ +# include +# endif +# endif +#endif + +#ifdef AMIGA +# define OS_CODE 0x01 +#endif + +#if defined(VAXC) || defined(VMS) +# define OS_CODE 0x02 +# define F_OPEN(name, mode) \ + fopen((name), (mode), "mbc=60", "ctx=stm", "rfm=fix", "mrs=512") +#endif + +#if defined(ATARI) || defined(atarist) +# define OS_CODE 0x05 +#endif + +#ifdef OS2 +# define OS_CODE 0x06 +# if defined(M_I86) && !defined(Z_SOLO) +# include +# endif +#endif + +#if defined(MACOS) || defined(TARGET_OS_MAC) +# define OS_CODE 0x07 +# ifndef Z_SOLO +# if defined(__MWERKS__) && __dest_os != __be_os && __dest_os != __win32_os +# include /* for fdopen */ +# else +# ifndef fdopen +# define fdopen(fd,mode) NULL /* No fdopen() */ +# endif +# endif +# endif +#endif + +#ifdef TOPS20 +# define OS_CODE 0x0a +#endif + +#ifdef WIN32 +# ifndef __CYGWIN__ /* Cygwin is Unix, not Win32 */ +# define OS_CODE 0x0b +# endif +#endif + +#ifdef __50SERIES /* Prime/PRIMOS */ +# define OS_CODE 0x0f +#endif + +#if defined(_BEOS_) || defined(RISCOS) +# define fdopen(fd,mode) NULL /* No fdopen() */ +#endif + +#if (defined(_MSC_VER) && (_MSC_VER > 600)) && !defined __INTERIX +# if defined(_WIN32_WCE) +# define fdopen(fd,mode) NULL /* No fdopen() */ +# ifndef _PTRDIFF_T_DEFINED + typedef int ptrdiff_t; +# define _PTRDIFF_T_DEFINED +# endif +# else +# define fdopen(fd,type) _fdopen(fd,type) +# endif +#endif + +#if defined(__BORLANDC__) && !defined(MSDOS) + #pragma warn -8004 + #pragma warn -8008 + #pragma warn -8066 +#endif + +/* provide prototypes for these when building zlib without LFS */ +#if !defined(_WIN32) && \ + (!defined(_LARGEFILE64_SOURCE) || _LFS64_LARGEFILE-0 == 0) + ZEXTERN uLong ZEXPORT adler32_combine64 OF((uLong, uLong, z_off_t)); + ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, z_off_t)); +#endif + + /* common defaults */ + +#ifndef OS_CODE +# define OS_CODE 0x03 /* assume Unix */ +#endif + +#ifndef F_OPEN +# define F_OPEN(name, mode) fopen((name), (mode)) +#endif + + /* functions */ + +#if defined(pyr) || defined(Z_SOLO) +# define NO_MEMCPY +#endif +#if defined(SMALL_MEDIUM) && !defined(_MSC_VER) && !defined(__SC__) + /* Use our own functions for small and medium model with MSC <= 5.0. + * You may have to use the same strategy for Borland C (untested). + * The __SC__ check is for Symantec. + */ +# define NO_MEMCPY +#endif +#if defined(STDC) && !defined(HAVE_MEMCPY) && !defined(NO_MEMCPY) +# define HAVE_MEMCPY +#endif +#ifdef HAVE_MEMCPY +# ifdef SMALL_MEDIUM /* MSDOS small or medium model */ +# define zmemcpy _fmemcpy +# define zmemcmp _fmemcmp +# define zmemzero(dest, len) _fmemset(dest, 0, len) +# else +# define zmemcpy memcpy +# define zmemcmp memcmp +# define zmemzero(dest, len) memset(dest, 0, len) +# endif +#else + void ZLIB_INTERNAL zmemcpy OF((Bytef* dest, const Bytef* source, uInt len)); + int ZLIB_INTERNAL zmemcmp OF((const Bytef* s1, const Bytef* s2, uInt len)); + void ZLIB_INTERNAL zmemzero OF((Bytef* dest, uInt len)); +#endif + +/* Diagnostic functions */ +#ifdef DEBUG +# include + extern int ZLIB_INTERNAL z_verbose; + extern void ZLIB_INTERNAL z_error OF((char *m)); +# define Assert(cond,msg) {if(!(cond)) z_error(msg);} +# define Trace(x) {if (z_verbose>=0) fprintf x ;} +# define Tracev(x) {if (z_verbose>0) fprintf x ;} +# define Tracevv(x) {if (z_verbose>1) fprintf x ;} +# define Tracec(c,x) {if (z_verbose>0 && (c)) fprintf x ;} +# define Tracecv(c,x) {if (z_verbose>1 && (c)) fprintf x ;} +#else +# define Assert(cond,msg) +# define Trace(x) +# define Tracev(x) +# define Tracevv(x) +# define Tracec(c,x) +# define Tracecv(c,x) +#endif + +#ifndef Z_SOLO + voidpf ZLIB_INTERNAL zcalloc OF((voidpf opaque, unsigned items, + unsigned size)); + void ZLIB_INTERNAL zcfree OF((voidpf opaque, voidpf ptr)); +#endif + +#define ZALLOC(strm, items, size) \ + (*((strm)->zalloc))((strm)->opaque, (items), (size)) +#define ZFREE(strm, addr) (*((strm)->zfree))((strm)->opaque, (voidpf)(addr)) +#define TRY_FREE(s, p) {if (p) ZFREE(s, p);} + +/* Reverse the bytes in a 32-bit value */ +#define ZSWAP32(q) ((((q) >> 24) & 0xff) + (((q) >> 8) & 0xff00) + \ + (((q) & 0xff00) << 8) + (((q) & 0xff) << 24)) + +#endif /* ZUTIL_H */